Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-22 11:13:07 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/arm/dts/Makefile

1396 lines
36 KiB
Makefile
Raw Normal View History

SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-06 21:58:06 +00:00
# SPDX-License-Identifier: GPL-2.0+
Various Makefiles: Add SPDX-License-Identifier tags After consulting with some of the SPDX team, the conclusion is that Makefiles are worth adding SPDX-License-Identifier tags too, and most of ours have one. This adds tags to ones that lack them and converts a few that had full (or in one case, very partial) license blobs into the equivalent tag. Cc: Kate Stewart <kstewart@linuxfoundation.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2015-11-10 01:06:16 +00:00
ARM: dts: Makefile: fix build for at91family For at91family, makefile was building unwanted DTBs Moved them under specific target configuration. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-08-09 11:12:00 +00:00
dtb-$(CONFIG_TARGET_SMARTWEB) += at91sam9260-smartweb.dtb
dtb-$(CONFIG_TARGET_TAURUS) += at91sam9g20-taurus.dtb
dtb-$(CONFIG_TARGET_CORVUS) += at91sam9g45-corvus.dtb
dtb-$(CONFIG_TARGET_GURNARD) += at91sam9g45-gurnard.dtb
corvus DTS / DM support Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas@biessmann.org> [rebase on current ToT, don't delete gurnard DTB creation] Signed-off-by: Andreas Bießmann <andreas@biessmann.org>
2016-05-25 05:23:45 +00:00
arm: samsung: Migrate a number of symbols to Kconfig - In a number of cases, use CONFIG_ARCH_EXYNOS[45] rather than CONFIG_EXYNOS[45] - In other cases, test for CONFIG_ARCH_EXYNOS or CONFIG_ARCH_S5PC1XX - Migrate specific SoC CONFIG values to Kconfig - Use CONFIG_TARGET_x rather than CONFIG_x - Migrate other CONFIG_EXYNOS_x symbols to Kconfig - Reference CONFIG_EXYNOS_RELOCATE_CODE_BASE directly as EXYNOS_RELOCATE_CODE_BASE - Rename CONFIG_S5P_PA_SYSRAM to CONFIG_SMP_PEN_ADDR to match the rest of U-Boot usage. Cc: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-11 02:59:33 +00:00
dtb-$(CONFIG_TARGET_SMDKC100) += s5pc1xx-smdkc100.dtb
dtb-$(CONFIG_TARGET_S5P_GONI) += s5pc1xx-goni.dtb
dtb-$(CONFIG_ARCH_EXYNOS4) += exynos4210-origen.dtb \
config: Move smdkv310 to use common exynos4 file Most of the smdkv310 features are common with other exynos4 boards. To permit easier addition of driver model support, use the common file and add a device tree file. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-10-08 04:01:49 +00:00
exynos4210-smdkv310.dtb \
board:trats: Enable device tree on Trats This patch enables to run Trats board on device tree. Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> CC: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-03-07 13:59:48 +00:00
exynos4210-universal_c210.dtb \
board:trats2: Enable device tree on Trats2 This patch enables to run Trats2 board on device tree. Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-03-07 13:59:49 +00:00
exynos4210-trats.dtb \
odroid: add odroid U3/X2 device tree description This is a standard description for Odroid boards. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Tom Rini <trini@ti.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-09-01 11:50:52 +00:00
exynos4412-trats2.dtb \
exynos4412-odroid.dtb
board:origen: Enable device tree on Origen This patch enables to run Origen board on device tree. Uart, DRAM and MMC init functions are removed as their generic replacements form the common board file are used. The config file is modified to contain only board specific options. Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Chander Kashyap <k.chander@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-03-07 13:59:46 +00:00
ARM: hisilicon: hikey: Enable OF_CONTROL for hikey board. Currently only the serial pl01x driver is using DT, and the other drivers still use platform data but as more DT lands in the upstream kernel the aim is to migrate the other drivers over to DT as well to have a fully DT configured hikey u-boot. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-04-20 16:13:59 +00:00
dtb-$(CONFIG_TARGET_HIKEY) += hi6220-hikey.dtb
arm: dts: Add devicetree for Hikey960 board This commit adds devicetree for Hikey960 board. Most of the contents are copied from Linux kernel with some modifications for u-boot. To be more precise, SD card's speed related properties are removed due to a bug in u-boot clock implementation. Hence forcing the SD controller to work in standard speed. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2019-08-02 15:10:08 +00:00
dtb-$(CONFIG_TARGET_HIKEY960) += hi3660-hikey960.dtb
ARM: hisilicon: hikey: Enable OF_CONTROL for hikey board. Currently only the serial pl01x driver is using DT, and the other drivers still use platform data but as more DT lands in the upstream kernel the aim is to migrate the other drivers over to DT as well to have a fully DT configured hikey u-boot. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-04-20 16:13:59 +00:00
ARM: fix arch/arm/dts/Makefile Since commit 27cb7300ffda ("Ensure device tree DTS is compiled"), build succeeds irrespective of the correctness of Makefile. In fact, you can compile any defconfig without adding any entry in arch/*/dts/Makefile. As a result, a lot of wrong code have been merged unnoticed. I am going to revert that commit, and lots of hidden issues have come to light: [1] Typos armada-3720-uDPU.dts, sun8i-a83t-tbs-a711.dts use the extension ".dts" instead of ".dtb" [2] DTB is associated to undefined CONFIG option For example, mx6sllevk_defconfig defines CONFIG_MX6SLL, but associates its device tree to CONFIG_MX6SL, which is undefined. [3] Lots of entries are missing Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Chris Packham <judge.packham@gmail.com> [trini: add imx6ul pico dtbs] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-03-14 05:58:33 +00:00
dtb-$(CONFIG_TARGET_POPLAR) += hi3798cv200-poplar.dtb
arm: samsung: Migrate a number of symbols to Kconfig - In a number of cases, use CONFIG_ARCH_EXYNOS[45] rather than CONFIG_EXYNOS[45] - In other cases, test for CONFIG_ARCH_EXYNOS or CONFIG_ARCH_S5PC1XX - Migrate specific SoC CONFIG values to Kconfig - Use CONFIG_TARGET_x rather than CONFIG_x - Migrate other CONFIG_EXYNOS_x symbols to Kconfig - Reference CONFIG_EXYNOS_RELOCATE_CODE_BASE directly as EXYNOS_RELOCATE_CODE_BASE - Rename CONFIG_S5P_PA_SYSRAM to CONFIG_SMP_PEN_ADDR to match the rest of U-Boot usage. Cc: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-11 02:59:33 +00:00
dtb-$(CONFIG_ARCH_EXYNOS5) += exynos5250-arndale.dtb \
dts: generate multiple device tree blobs It is convenient to have all device trees on the same SoC compiled. It allows for later easy repackaging without the need to re-run the make file. - Build device trees with the same SoC under arch/$(ARCH)/dts - Copy the one specified by CONFIG_DEFAULT_DEVICE_TREE or DEVICE_TREE=... to dts/dt.dtb Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-05 02:28:27 +00:00
exynos5250-snow.dtb \
exynos: Add support for spring Spring is the first ARM-based HP Chromebook 11. It is similar to snow and it uses the same Samsung Exynos5250 chip. But has some unusual features. Mainline support for it has lagged snow (both in kernel and U-Boot). Now that the exynos5 code is common we can support spring just by adding a device tree and a few lines of configuration. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-08-03 14:19:37 +00:00
exynos5250-spring.dtb \
dts: generate multiple device tree blobs It is convenient to have all device trees on the same SoC compiled. It allows for later easy repackaging without the need to re-run the make file. - Build device trees with the same SoC under arch/$(ARCH)/dts - Copy the one specified by CONFIG_DEFAULT_DEVICE_TREE or DEVICE_TREE=... to dts/dt.dtb Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-05 02:28:27 +00:00
exynos5250-smdk5250.dtb \
Exynos5420: Introduce support for the Peach-Pit board While the Exynos5420 chip is used in both Smdk5420 and in the Peach-Pit line of devices, there could be other boards using the same chip, so a common configuration file is being added (exynos5420.h) as well as two common device tree files (exynos54xx.dtsi & exynos5420.dtsi). The peach board as declared in boards.cfg is a copy of smdk5420 declaration. The configuration files are similar, but define different default device trees, console serial ports and prompts. The device tree files for smdk5420 and peach-pit inherit from the same common file. Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-06-18 12:23:58 +00:00
exynos5420-smdk5420.dtb \
Exynos5800: Add DTS for new board Peach-Pi We have a new board Peach-Pi similar to Peach-Pit. Peach-Pi differs from Peach-Pit in configuration factors like display resolution, memory size, SoC version etc. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-11-13 17:08:16 +00:00
exynos5420-peach-pit.dtb \
Odroid-XU3: Add support for Odroid-XU3 This patch adds support for Odroid-XU3. Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com> Reviewed-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-12-12 05:45:45 +00:00
exynos5800-peach-pi.dtb \
exynos5422-odroidxu3.dtb
board: samsung: add initial Espresso7420 board support Espresso7420 is a development/evaluation board for Exynos7420 SoC. It includes multiple onboard compoments (EMMC/Codec) and various interconnects (USB/HDMI). Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2016-04-23 16:48:14 +00:00
dtb-$(CONFIG_EXYNOS7420) += exynos7420-espresso7420.dtb
board: samsung: add support for Galaxy A series of 2017 (a5y17lte) Samsung Galaxy A3, A5, A7 (2017) - middle class Samsung smartphones. U-boot can be used as chain-loaded bootloader to gain control on booting vanilla linux(and possibly others) kernels Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
2021-10-17 10:45:42 +00:00
dtb-$(CONFIG_TARGET_A5Y17LTE) += exynos78x0-axy17lte.dtb
dtb-$(CONFIG_TARGET_A3Y17LTE) += exynos78x0-axy17lte.dtb
dtb-$(CONFIG_TARGET_A7Y17LTE) += exynos78x0-axy17lte.dtb
ARM: fix arch/arm/dts/Makefile Since commit 27cb7300ffda ("Ensure device tree DTS is compiled"), build succeeds irrespective of the correctness of Makefile. In fact, you can compile any defconfig without adding any entry in arch/*/dts/Makefile. As a result, a lot of wrong code have been merged unnoticed. I am going to revert that commit, and lots of hidden issues have come to light: [1] Typos armada-3720-uDPU.dts, sun8i-a83t-tbs-a711.dts use the extension ".dts" instead of ".dtb" [2] DTB is associated to undefined CONFIG option For example, mx6sllevk_defconfig defines CONFIG_MX6SLL, but associates its device tree to CONFIG_MX6SL, which is undefined. [3] Lots of entries are missing Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Chris Packham <judge.packham@gmail.com> [trini: add imx6ul pico dtbs] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-03-14 05:58:33 +00:00
arm: dts: apple: Add preliminary device trees Add preliminary device trees for the Apple M1 mini (2020) and Apple M1 Macbook Pro 13" (2020). Device tree bindings for the Apple M1 SoC are still being formalized and these device trees will be synchronized with the Linux kernel as needed. The device trees in this commit are based on the initial Apple M1 device trees from Linux 5.13, nodes for dart, pcie, pinctrl, pmgr, usb based on bindings on track for inclusion in Linux 5.15 and 5.16 and nodes for i2c, mailbox, nvme, pmu, spmi and watchdog that don't have a proposed binding yet. These device trees are provided as a reference only as U-Boot uses the device tree passed by the m1n1 bootloader. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-23 14:58:06 +00:00
dtb-$(CONFIG_ARCH_APPLE) += \
t8103-j274.dtb \
arm: dts: apple: Update Apple M1 device trees This synchronizes the device trees with those that are in the process of being upstreamed into Linux. This is mostly the current state of the device trees on the asahilinux branch with a few extra bits used by OpenBSD. This includes device trees for machines that were still missing. There are still some differences that will hopefully be resolved soon. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-01-10 19:58:42 +00:00
t8103-j293.dtb \
t8103-j313.dtb \
t8103-j456.dtb \
t8103-j457.dtb
arm: dts: apple: Add preliminary device trees Add preliminary device trees for the Apple M1 mini (2020) and Apple M1 Macbook Pro 13" (2020). Device tree bindings for the Apple M1 SoC are still being formalized and these device trees will be synchronized with the Linux kernel as needed. The device trees in this commit are based on the initial Apple M1 device trees from Linux 5.13, nodes for dart, pcie, pinctrl, pmgr, usb based on bindings on track for inclusion in Linux 5.15 and 5.16 and nodes for i2c, mailbox, nvme, pmu, spmi and watchdog that don't have a proposed binding yet. These device trees are provided as a reference only as U-Boot uses the device tree passed by the m1n1 bootloader. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-23 14:58:06 +00:00
ARM: fix arch/arm/dts/Makefile Since commit 27cb7300ffda ("Ensure device tree DTS is compiled"), build succeeds irrespective of the correctness of Makefile. In fact, you can compile any defconfig without adding any entry in arch/*/dts/Makefile. As a result, a lot of wrong code have been merged unnoticed. I am going to revert that commit, and lots of hidden issues have come to light: [1] Typos armada-3720-uDPU.dts, sun8i-a83t-tbs-a711.dts use the extension ".dts" instead of ".dtb" [2] DTB is associated to undefined CONFIG option For example, mx6sllevk_defconfig defines CONFIG_MX6SLL, but associates its device tree to CONFIG_MX6SL, which is undefined. [3] Lots of entries are missing Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Chris Packham <judge.packham@gmail.com> [trini: add imx6ul pico dtbs] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-03-14 05:58:33 +00:00
dtb-$(CONFIG_ARCH_DAVINCI) += \
da850-evm.dtb \
ARM: legoev3: convert to driver model This converts LEGO MINDSTORMS EV3 to the driver model. MMC, SERIAL, SPI and SPI_FLASH are converted. The device tree contains only the minimal nodes required by U-Boot since the size of U-Boot is limited to 256K on this device. Signed-off-by: David Lechner <david@lechnology.com>
2019-05-29 01:56:42 +00:00
da850-lcdk.dtb \
da850-lego-ev3.dtb
ARM: fix arch/arm/dts/Makefile Since commit 27cb7300ffda ("Ensure device tree DTS is compiled"), build succeeds irrespective of the correctness of Makefile. In fact, you can compile any defconfig without adding any entry in arch/*/dts/Makefile. As a result, a lot of wrong code have been merged unnoticed. I am going to revert that commit, and lots of hidden issues have come to light: [1] Typos armada-3720-uDPU.dts, sun8i-a83t-tbs-a711.dts use the extension ".dts" instead of ".dtb" [2] DTB is associated to undefined CONFIG option For example, mx6sllevk_defconfig defines CONFIG_MX6SLL, but associates its device tree to CONFIG_MX6SL, which is undefined. [3] Lots of entries are missing Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Chris Packham <judge.packham@gmail.com> [trini: add imx6ul pico dtbs] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-03-14 05:58:33 +00:00
rename symbol: CONFIG_KIRKWOOD -> CONFIG_ARCH_KIRKWOOD Have this symbol follow the pattern of all other such symbols. This patch also removes a TODO from the code. Reviewed-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2020-05-06 12:02:40 +00:00
dtb-$(CONFIG_ARCH_KIRKWOOD) += \
ARM: fix arch/arm/dts/Makefile Since commit 27cb7300ffda ("Ensure device tree DTS is compiled"), build succeeds irrespective of the correctness of Makefile. In fact, you can compile any defconfig without adding any entry in arch/*/dts/Makefile. As a result, a lot of wrong code have been merged unnoticed. I am going to revert that commit, and lots of hidden issues have come to light: [1] Typos armada-3720-uDPU.dts, sun8i-a83t-tbs-a711.dts use the extension ".dts" instead of ".dtb" [2] DTB is associated to undefined CONFIG option For example, mx6sllevk_defconfig defines CONFIG_MX6SLL, but associates its device tree to CONFIG_MX6SL, which is undefined. [3] Lots of entries are missing Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Chris Packham <judge.packham@gmail.com> [trini: add imx6ul pico dtbs] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-03-14 05:58:33 +00:00
kirkwood-atl-sbx81lifkw.dtb \
kirkwood-atl-sbx81lifxcat.dtb \
kirkwood-blackarmor-nas220.dtb \
kirkwood-d2net.dtb \
kirkwood-dns325.dtb \
kirkwood-dockstar.dtb \
kirkwood-dreamplug.dtb \
kirkwood-ds109.dtb \
kirkwood-goflexnet.dtb \
kirkwood-guruplug-server-plus.dtb \
kirkwood-ib62x0.dtb \
kirkwood-iconnect.dtb \
kirkwood-is2.dtb \
kirkwood-lsxhl.dtb \
kirkwood-lschlv2.dtb \
kirkwood-net2big.dtb \
kirkwood-ns2.dtb \
kirkwood-ns2lite.dtb \
kirkwood-ns2max.dtb \
kirkwood-ns2mini.dtb \
arm: kirkwood: NSA310S: Add device tree DTS for Zyxel NSA310S board Add device tree kirkwood-nsa310s.dts for Zyxel NSA310S board to convert to Driver Model. Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-01 04:26:22 +00:00
kirkwood-nsa310s.dtb \
arm: kirkwood: dts: Add openrd-* dtb makefile build targets The following Kirkwood dtb build targets are currently missing: kirkwood-openrd-base.dtb kirkwood-openrd-client.dtb kirkwood-openrd-ultimate.dtb This patch adds them to the Makefile to fix the build error. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Chris Packham <judge.packham@gmail.com> Reviewed-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2019-04-11 10:33:34 +00:00
kirkwood-openrd-base.dtb \
kirkwood-openrd-client.dtb \
kirkwood-openrd-ultimate.dtb \
ARM: fix arch/arm/dts/Makefile Since commit 27cb7300ffda ("Ensure device tree DTS is compiled"), build succeeds irrespective of the correctness of Makefile. In fact, you can compile any defconfig without adding any entry in arch/*/dts/Makefile. As a result, a lot of wrong code have been merged unnoticed. I am going to revert that commit, and lots of hidden issues have come to light: [1] Typos armada-3720-uDPU.dts, sun8i-a83t-tbs-a711.dts use the extension ".dts" instead of ".dtb" [2] DTB is associated to undefined CONFIG option For example, mx6sllevk_defconfig defines CONFIG_MX6SLL, but associates its device tree to CONFIG_MX6SL, which is undefined. [3] Lots of entries are missing Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Chris Packham <judge.packham@gmail.com> [trini: add imx6ul pico dtbs] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-03-14 05:58:33 +00:00
kirkwood-pogo_e02.dtb \
arm: kirkwood: Pogoplug-V4 : Add DTS files Add DTS files for Pogoplug V4 board Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Pali Rohár <pali@kernel.org>
2022-01-24 06:17:10 +00:00
kirkwood-pogoplug-series-4.dtb \
ARM: fix arch/arm/dts/Makefile Since commit 27cb7300ffda ("Ensure device tree DTS is compiled"), build succeeds irrespective of the correctness of Makefile. In fact, you can compile any defconfig without adding any entry in arch/*/dts/Makefile. As a result, a lot of wrong code have been merged unnoticed. I am going to revert that commit, and lots of hidden issues have come to light: [1] Typos armada-3720-uDPU.dts, sun8i-a83t-tbs-a711.dts use the extension ".dts" instead of ".dtb" [2] DTB is associated to undefined CONFIG option For example, mx6sllevk_defconfig defines CONFIG_MX6SLL, but associates its device tree to CONFIG_MX6SL, which is undefined. [3] Lots of entries are missing Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Chris Packham <judge.packham@gmail.com> [trini: add imx6ul pico dtbs] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-03-14 05:58:33 +00:00
kirkwood-sheevaplug.dtb
arm: dts: sync dts for Action Semi S900 Synchronize device tree bindings with v5.5-rc6 tag with commit id "b3a987b0264d". Also, it removes older clock binding defined for S900 along with undocumented compatible string "actions,s900-serial" from serial driver and adapts clock driver to cater to new bindings. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-19 13:58:28 +00:00
dtb-$(CONFIG_MACH_S900) += \
ARM: fix arch/arm/dts/Makefile Since commit 27cb7300ffda ("Ensure device tree DTS is compiled"), build succeeds irrespective of the correctness of Makefile. In fact, you can compile any defconfig without adding any entry in arch/*/dts/Makefile. As a result, a lot of wrong code have been merged unnoticed. I am going to revert that commit, and lots of hidden issues have come to light: [1] Typos armada-3720-uDPU.dts, sun8i-a83t-tbs-a711.dts use the extension ".dts" instead of ".dtb" [2] DTB is associated to undefined CONFIG option For example, mx6sllevk_defconfig defines CONFIG_MX6SLL, but associates its device tree to CONFIG_MX6SL, which is undefined. [3] Lots of entries are missing Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Chris Packham <judge.packham@gmail.com> [trini: add imx6ul pico dtbs] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-03-14 05:58:33 +00:00
bubblegum_96.dtb
arm: actions: add S700 SoC device tree This patch adds .dtsi file(sync with Linux 5.5-rc6 with hash "b3a987b0264d") and required binding for S700 SoC that is a 64-bit Quad-core ARM Cortex-A53 cores. It also provisions dts file to be built based on selected platform(CONFIG_MACH_S900/S700). Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-19 13:58:31 +00:00
dtb-$(CONFIG_MACH_S700) += \
s700-cubieboard7.dtb
ARM: fix arch/arm/dts/Makefile Since commit 27cb7300ffda ("Ensure device tree DTS is compiled"), build succeeds irrespective of the correctness of Makefile. In fact, you can compile any defconfig without adding any entry in arch/*/dts/Makefile. As a result, a lot of wrong code have been merged unnoticed. I am going to revert that commit, and lots of hidden issues have come to light: [1] Typos armada-3720-uDPU.dts, sun8i-a83t-tbs-a711.dts use the extension ".dts" instead of ".dtb" [2] DTB is associated to undefined CONFIG option For example, mx6sllevk_defconfig defines CONFIG_MX6SLL, but associates its device tree to CONFIG_MX6SL, which is undefined. [3] Lots of entries are missing Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Chris Packham <judge.packham@gmail.com> [trini: add imx6ul pico dtbs] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-03-14 05:58:33 +00:00
rockchip: add px30 devicetrees Add px30 related devicetrees synced from the Linux kernel. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-16 20:12:07 +00:00
dtb-$(CONFIG_ROCKCHIP_PX30) += \
rockchip: px30-firefly add standalone dts Firefly Core-PX30-JD4 use UART2M1 while PX30 evb using UART2M0, the U-Boot proper will use the dts setting to do the IOMUX init, and a separate dts is needed for px30-firefly. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-13 09:41:17 +00:00
px30-evb.dtb \
rockchip: px30: sync Odroid Go Advance devicetree from Linux Get the devicetree from mainline Linux and include it for U-Boot uses. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-01 09:28:41 +00:00
px30-firefly.dtb \
arm64: dts: rockchip: Sync px30 from linux-next Sync the px30 devicetree files from linux-next tree. commit <14ce8069f48b> ("lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() - fixup3") Note, this path even sync rk3326 files as it depends on px30. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-11-15 17:38:20 +00:00
px30-engicam-px30-core-ctouch2.dtb \
engicam: px30: Add Engicam PX30.Core C.TOUCH 2.0 10.1" OF PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam. C.TOUCH 2.0 is a general purpose carrier board with capacitive touch interface support. 10.1" OF is a capacitive touch 10.1" Open Frame panel solutions. PX30.Core needs to mount on top of C.TOUCH 2.0 carrier with pluged 10.1" OF for creating complete PX30.Core C.TOUCH 2.0 10.1" Open Frame. Add support for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-11-15 17:38:21 +00:00
px30-engicam-px30-core-ctouch2-of10.dtb \
arm64: dts: rockchip: Sync px30 from linux-next Sync the px30 devicetree files from linux-next tree. commit <14ce8069f48b> ("lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() - fixup3") Note, this path even sync rk3326 files as it depends on px30. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-11-15 17:38:20 +00:00
px30-engicam-px30-core-edimm2.2.dtb \
rockchip: px30: sync Odroid Go Advance devicetree from Linux Get the devicetree from mainline Linux and include it for U-Boot uses. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-01 09:28:41 +00:00
rk3326-odroid-go2.dtb
rockchip: add px30 devicetrees Add px30 related devicetrees synced from the Linux kernel. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-16 20:12:07 +00:00
dts: Makefile: Build rockchip dtbs based on SoC types - Sometimes u-boot specific dtsi files are included automatically which would build for entire rockchip SoC, even-though the respective dtsi should used it for specific family of rockchip SoC. - Sometimes u-boot specific dts nodes or properties can use config macros from respective rockchip family include/configs files, example CONFIG_SPL_PAD_TO. So, it's better to compile the dtbs based on the respective rockchip family types rather than rockchip itself to avoid compilation issues. This patch organize the existing dtb's based on the rockchip family types. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-07 18:21:49 +00:00
dtb-$(CONFIG_ROCKCHIP_RK3036) += \
rk3036-sdk.dtb
arm: dts: rockchip: add rk3066a-mk808.dts MK808 is a RK3066-based board with 1 USB host and 1 USB OTG port, HDMI and a micro-SD card slot. It also includes on-board NAND and 1GB of SDRAM. Add rk3066a-mk808.dts. Move U-boot specific things in a rk3066a-mk808-u-boot.dtsi file. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-04-16 15:09:45 +00:00
dtb-$(CONFIG_ROCKCHIP_RK3066) += \
rk3066a-mk808.dtb
dts: Makefile: Build rockchip dtbs based on SoC types - Sometimes u-boot specific dtsi files are included automatically which would build for entire rockchip SoC, even-though the respective dtsi should used it for specific family of rockchip SoC. - Sometimes u-boot specific dts nodes or properties can use config macros from respective rockchip family include/configs files, example CONFIG_SPL_PAD_TO. So, it's better to compile the dtbs based on the respective rockchip family types rather than rockchip itself to avoid compilation issues. This patch organize the existing dtb's based on the rockchip family types. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-07 18:21:49 +00:00
dtb-$(CONFIG_ROCKCHIP_RK3128) += \
rk3128-evb.dtb
dtb-$(CONFIG_ROCKCHIP_RK3188) += \
rk3188-radxarock.dtb
dtb-$(CONFIG_ROCKCHIP_RK322X) += \
rk3229-evb.dtb
dtb-$(CONFIG_ROCKCHIP_RK3288) += \
rockchip: cosmetic: Sort RK3288 boards Sort rk3288 boards in alphabetical order. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Eddie Cai <eddie.cai.linux@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2017-03-29 23:23:13 +00:00
rk3288-evb.dtb \
rockchip: Add basic support for jerry This builds and displays an SPL message, but does not function beyond that. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-08-30 22:55:42 +00:00
rk3288-firefly.dtb \
rockchip: Add support for MiQi rk3288 board MiQi is rk3288 based development board with 1 or 2 GB SDRAM, 16 GB eMMC, micro SD card interface, 4 USB 2.0 ports, HDMI, gigabit Ethernet and expansion ports. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Eddie Cai <eddie.cai.linux@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2017-03-29 23:23:14 +00:00
rk3288-miqi.dtb \
rockchip: Add basic support for phyCORE-RK3288 SoM based carrier board The phyCORE-RK3288 is a SoM (System on Module) containing a RK3288 SoC. The module can be connected to different carrier boards. It can be also equipped with different RAM, SPI flash and eMMC variants. The Rapid Development Kit option is using the following setup: - 1 GB DDR3 RAM (2 Banks) - 1x 4 KB EEPROM - DP83867 Gigabit Ethernet PHY - 16 MB SPI Flash - 4 GB eMMC Flash Add basic support for the PCM-947 carrier board, a RK3288 based development board made by PHYTEC. This board works in a combination with the phyCORE-RK3288 System on Module. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-06-19 10:36:40 +00:00
rk3288-phycore-rdk.dtb \
rockchip: cosmetic: Sort RK3288 boards Sort rk3288 boards in alphabetical order. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Eddie Cai <eddie.cai.linux@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2017-03-29 23:23:13 +00:00
rk3288-popmetal.dtb \
rk3288-rock2-square.dtb \
ARM: dts: rockchip: Add Radxa Rock Pi N8 initial support Rock Pi N8 is a Rockchip RK3288 based SBC, which has - VMARC RK3288 SOM (as per SMARC standard) from Vamrs. - Compatible carrier board from Radxa. VAMRC RK3288 SOM need to mount on top of radxa dalang carrier board for making Rock Pi N8 SBC. So, add initial support for Rock Pi N8 by including rk3288, rk3288 vamrc-som and raxda dalang carrier board dtsi files. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-06-18 16:12:20 +00:00
rk3288-rock-pi-n8.dtb \
rockchip: cosmetic: Sort RK3288 boards Sort rk3288 boards in alphabetical order. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Eddie Cai <eddie.cai.linux@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2017-03-29 23:23:13 +00:00
rk3288-tinker.dtb \
rockchip: dts: tinker: Add tinker-s board support Support tinker-s board. The board is equivalent of tinker board except of emmc. TODO: - support of usb current burst when the board is powered from pc Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-15 21:07:24 +00:00
rk3288-tinker-s.dtb \
rockchip: Rename jerry files to veyron At present we have a single rk3288-based Chromebook: chromebook_jerry. But all such Chromebooks can use the same binary with only device-tree differences. The family name is 'veyron', so rename the files accordingly. Also update the device-tree filename since this currently differs from Linux. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-11-13 21:22:10 +00:00
rk3288-veyron-jerry.dtb \
rockchip: Add support for veyron-mickey (Chromebit) This adds support for the Asus Chromebit, and RK3288-based device designed to plug directly into an HDMI monitor. The device tree file comes from Linux v4.8. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-11-13 21:22:16 +00:00
rk3288-veyron-mickey.dtb \
rockchip: Add support for veyron-minnie (ASUS Chromebook Flip) This adds support for the Asus Chromebook Flip, an RK3288-based clamshell device which can flip into 'tablet' mode. The device tree file comes from Linux v4.8. The SDRAM parameters are for 4GB Samsung LPDDR3. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-11-13 21:24:54 +00:00
rk3288-veyron-minnie.dtb \
rockchip: add support for veyron-speedy (ASUS Chromebook C201) This adds support for the ASUS C201, a RK3288-based clamshell device. The device tree comes from linus's linux tree at 3f16503b7d2274ac8cbab11163047ac0b4c66cfe. The SDRAM parameters are for 4GB Samsung LPDDR3, decoded from coreboot's src/mainboard/google/veyron/sdram_inf/sdram-lpddr3-samsung-4GB.inc Signed-off-by: Marty E. Plummer <hanetzer@startmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-01-06 02:12:08 +00:00
rk3288-veyron-speedy.dtb \
dts: Makefile: Build rockchip dtbs based on SoC types - Sometimes u-boot specific dtsi files are included automatically which would build for entire rockchip SoC, even-though the respective dtsi should used it for specific family of rockchip SoC. - Sometimes u-boot specific dts nodes or properties can use config macros from respective rockchip family include/configs files, example CONFIG_SPL_PAD_TO. So, it's better to compile the dtbs based on the respective rockchip family types rather than rockchip itself to avoid compilation issues. This patch organize the existing dtb's based on the rockchip family types. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-07 18:21:49 +00:00
rk3288-vyasa.dtb
arm: dts: rockchip: Add dts for rk3308 evb Add dts for rk3308 evb, sync from the linux kernel upstream list [0]. [0]https://patchwork.kernel.org/patch/11201555/ Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-14 03:21:14 +00:00
dtb-$(CONFIG_ROCKCHIP_RK3308) += \
rockchip: rk3308: Add dts for ROC-RK3308-CC Add dts file for ROC-RK3308-CC from firefly. Sync form linux rockchip for v5.5-armsoc/dts64: "arm64: dts: rockchip: Add devicetree for board roc-rk3308-cc" (sha1: 4403e1237be3af0977aa23ef399e3496316317a0) Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-14 03:22:47 +00:00
rk3308-evb.dtb \
rk3308-roc-cc.dtb
arm: dts: rockchip: Add dts for rk3308 evb Add dts for rk3308 evb, sync from the linux kernel upstream list [0]. [0]https://patchwork.kernel.org/patch/11201555/ Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-14 03:21:14 +00:00
dts: Makefile: Build rockchip dtbs based on SoC types - Sometimes u-boot specific dtsi files are included automatically which would build for entire rockchip SoC, even-though the respective dtsi should used it for specific family of rockchip SoC. - Sometimes u-boot specific dts nodes or properties can use config macros from respective rockchip family include/configs files, example CONFIG_SPL_PAD_TO. So, it's better to compile the dtbs based on the respective rockchip family types rather than rockchip itself to avoid compilation issues. This patch organize the existing dtb's based on the rockchip family types. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-07 18:21:49 +00:00
dtb-$(CONFIG_ROCKCHIP_RK3328) += \
rockchip: dts: rk3328: add rk3328-rock64.dts rk3328-rock64.dts has been taken from Linux kernel commit cff6d1d6f88b ("arm64: dts: rockchip: enable HS200 for eMMC on rock64") with minor modifications (drop nodes not known by rk3328.dtsi). Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-06-08 21:27:16 +00:00
rk3328-evb.dtb \
rockchip: rk3328: Add support for FriendlyARM NanoPi R2S This adds support for the NanoPi R2S from FriendlyArm. Rockchip RK3328 SoC 1GB DDR4 RAM Gigabit Ethernet (WAN) Gigabit Ethernet (USB3) (LAN) USB 2.0 Host Port MicroSD slot Reset button WAN - LAN - SYS LED Signed-off-by: David Bauer <mail@david-bauer.net> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2021-01-06 23:06:11 +00:00
rk3328-nanopi-r2s.dtb \
rockchip: rk3328: Add support for ROC-RK3328-CC board The ROC-RK3328-CC from Firefly and Libre Computer Project is a credit card size development board based on the Rockchip RK3328 SoC, with: - 1/2/4 GB DDR4 DRAM - eMMC connector for optional module - micro SD card slot - 1 x USB 3.0 host port - 2 x USB 2.0 host port - 1 x USB 2.0 OTG port - HDMI video output - TRRS connector with audio and composite video output - gigabit Ethernet - consumer IR receiver - debug UART pins The ROC-RK3328-CC has the enable pin of the SD card power switch tied to GPIO_0_D6. This pin also has the function SDMMC0_PWREN, which is muxed by default. SDMMC0_PWREN is an active high signal controlled by the MMC controller, however the switch enable is active low, and pulled low (enabled) by default to make things work on boot. As such, we need to mux away from SDMMC0_PWREN and use GPIO to enable power to the card. The default GPIO state for the pin is pull-down and input, which doesn't require extra configuration when paired with the external pull-down and active low switch. Deal with this by enabling regulator support in SPL, and setting "u-boot,dm-spl" for the regulator and other device nodes needed for muxing the pin. The device tree file is synced from the Linux kernel next-20200324. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-04-27 06:52:53 +00:00
rk3328-roc-cc.dtb \
rockchip: rk3328: add rock-pi-e dts file The ROCK-PI-E is a credit card size SBC based on Rockchip RK3328 Quad-Core ARM Cortex A53. Net - Dual ethernet port, 1 X Gbe, 1 X 100M USB - USB 3.0 DC - USB-Type C, 5V 2A Storage - TF card, eMMC Just build idbloader.img and u-boot.itb for Rockpi E board and follow the blow steps to replace the relevant partition. dd if=idbloader.img of=/dev/sdcard seek=64 conv=notrunc dd if=u-boot.itb of=/dev/sdcard seek=16384 conv=notrunc Signed-off-by: Banglang Huang <banglang.huang@foxmail.com>
2020-05-31 16:01:28 +00:00
rk3328-rock64.dtb \
rk3328-rock-pi-e.dtb
dts: Makefile: Build rockchip dtbs based on SoC types - Sometimes u-boot specific dtsi files are included automatically which would build for entire rockchip SoC, even-though the respective dtsi should used it for specific family of rockchip SoC. - Sometimes u-boot specific dts nodes or properties can use config macros from respective rockchip family include/configs files, example CONFIG_SPL_PAD_TO. So, it's better to compile the dtbs based on the respective rockchip family types rather than rockchip itself to avoid compilation issues. This patch organize the existing dtb's based on the rockchip family types. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-07 18:21:49 +00:00
dtb-$(CONFIG_ROCKCHIP_RK3368) += \
rockchip: rk3368: sync down rk3368-lion board devicetree from Linux This brings the actual rk3368-lion devicetree files from Linux 5.10 instead of using something separate. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-02-09 13:47:09 +00:00
rk3368-lion-haikou.dtb \
rockchip: rk3368: add Sheep board Sheep board is designed by Rockchip as a EVB for rk3368. Currently it is able to boot a linux kernel and system to console with the miniloader run as fist level loader. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
2017-05-15 09:53:50 +00:00
rk3368-sheep.dtb \
rockchip: rk3368: Add initial support for RK3368 based GeekBox The GeekBox is a TV box from GeekBuying, based on an MXM3 module. The module can be used with base boards such as the GeekBox Landingship. This adds basic support to chain-load U-Boot from Rockchip's miniloader. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-15 09:54:26 +00:00
rk3368-geekbox.dtb \
rockchip: rk3368: Add PX5 Evaluation board PX5 EVB is designed by Rockchip for automotive field with integrated CVBS (TP2825) / MIPI DSI / CSI / LVDS HDMI video input/output interface, audio codec ES8396, WIFI / BT (on RTL8723BS), Gsensor BMA250E and light&proximity sensor STK3410. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-15 09:54:48 +00:00
rk3368-px5-evb.dtb \
dts: Makefile: Build rockchip dtbs based on SoC types - Sometimes u-boot specific dtsi files are included automatically which would build for entire rockchip SoC, even-though the respective dtsi should used it for specific family of rockchip SoC. - Sometimes u-boot specific dts nodes or properties can use config macros from respective rockchip family include/configs files, example CONFIG_SPL_PAD_TO. So, it's better to compile the dtbs based on the respective rockchip family types rather than rockchip itself to avoid compilation issues. This patch organize the existing dtb's based on the rockchip family types. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-07 18:21:49 +00:00
dtb-$(CONFIG_ROCKCHIP_RK3399) += \
dts: rk3399-puma: add DTS for RK3399-Q7 (Puma) SoM The RK3399-Q7 is a system-on-module featuring the Rockchip RK3399 in a Qseven-compatible form-factor. These changes add a device-tree describing the board and its interfaces for basic functionality (e.g. GbE, SPI, eMMC, SD-card). This includes the following changes from the original development: * dts: rk3399-puma: include DTS for RK3399-Q7 SoM in the Makefile * dts: rk3399-puma: add gmac for the RK3399-Q7 This change enables the Gigabit Ethernet support on the RK3399-Q7. * dts: rk3399-puma: use serial0 for stdout * dts: rk3399-puma: prepare the sdmmc node for SPL booting * dts: rk3399-puma: enable spi1 and spi5, add /spi1/spiflash The RK3399-Q7 (Puma) unsually (this is a build-time option for customised boards) has an on-module SPI-flash connected to SPI1. As of today, this is a Winbond W25Q32DW (32MBit) device. The SPI5 controller is routed to the Q7 edge connector and provides general-purpose SPI connectivity for customer base-boards. With some minor improvements on integration into our outbound tree - explicitly modelled the SPI flash as 'spiflash' under spi0 [dts: rk3399-puma: explicitly model spi-flash under spi1] - renamed the aliases to spi0 and spi1 to allow easier use of commands and legacy (SPL) infrastructure... i.e. the controllers will be 0 and 1 for 'sf probe', 'sspi', etc. [dts: rk3399-puma: rename aliases to number spi as 0 and 1 for commands] * dts: rk3399-puma: include SPI in the spl-boot-order property Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Simon Glass <sjg@chromium.org>
2017-03-28 16:48:51 +00:00
rk3399-evb.dtb \
rockchip: rk3399: Add EAIDK-610 support Specification - Rockchip RK3399 - LPDDR3 4GB - TF sd scard slot - eMMC - AP6255 for WiFi + BT - Gigabit ethernet - HDMI out - 40 pin header - USB 2.0 x 2 - USB 3.0 x 1 - USB 3.0 Type-C x 1 work in otg mode - 12V DC Power supply The dts file is sync from linux-next[0]. [0]:https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/arch/arm64/boot/dts/rockchip/rk3399-eaidk-610.dts Signed-off-by: Andy Yan <andyshrk@163.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-09-18 11:30:02 +00:00
rk3399-eaidk-610.dtb \
dts: Makefile: Build rockchip dtbs based on SoC types - Sometimes u-boot specific dtsi files are included automatically which would build for entire rockchip SoC, even-though the respective dtsi should used it for specific family of rockchip SoC. - Sometimes u-boot specific dts nodes or properties can use config macros from respective rockchip family include/configs files, example CONFIG_SPL_PAD_TO. So, it's better to compile the dtbs based on the respective rockchip family types rather than rockchip itself to avoid compilation issues. This patch organize the existing dtb's based on the rockchip family types. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-07 18:21:49 +00:00
rk3399-ficus.dtb \
rockchip: dts: add rk3399-firefly dts Firefly-rk3399 is a bord from T-Firefly, you can find detail about it here: http://en.t-firefly.com/en/firenow/Firefly_RK3399/ This patch add basic node for the board and make it able to bring up. Peripheral/interfaces on board: - usb hub which connect to ehci controller; - UART2 debug - eMMC - PCIe - USB 3.0 HOST, type-C port - sdio, sd-card - HDMI - Ethernet - OPTICAL - WiFi/BT - MIPI CSI/DSI - IR - EDP/DP Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-04-19 10:17:32 +00:00
rk3399-firefly.dtb \
ARM: fix arch/arm/dts/Makefile Since commit 27cb7300ffda ("Ensure device tree DTS is compiled"), build succeeds irrespective of the correctness of Makefile. In fact, you can compile any defconfig without adding any entry in arch/*/dts/Makefile. As a result, a lot of wrong code have been merged unnoticed. I am going to revert that commit, and lots of hidden issues have come to light: [1] Typos armada-3720-uDPU.dts, sun8i-a83t-tbs-a711.dts use the extension ".dts" instead of ".dtb" [2] DTB is associated to undefined CONFIG option For example, mx6sllevk_defconfig defines CONFIG_MX6SLL, but associates its device tree to CONFIG_MX6SL, which is undefined. [3] Lots of entries are missing Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Chris Packham <judge.packham@gmail.com> [trini: add imx6ul pico dtbs] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-03-14 05:58:33 +00:00
rk3399-gru-bob.dtb \
rockchip: rk3399: Add support for chromebook_kevin Add support for Kevin, an RK3399-based convertible chromebook that is very similar to Bob. This patch is mostly based on existing support for Bob, with only minor changes for Kevin-specific things. Unlike other Gru boards, coreboot sets Kevin's center logic to 925 mV, so adjust it here in the dts as well. The rk3399-gru-kevin devicetree has an unknown event code reference which has to be defined, set it to the Linux counterpart. The new defconfig is copied from Bob with the diffconfig: DEFAULT_DEVICE_TREE "rk3399-gru-bob" -> "rk3399-gru-kevin" DEFAULT_FDT_FILE "rockchip/rk3399-gru-bob.dtb" -> "rockchip/rk3399-gru-kevin.dtb" VIDEO_ROCKCHIP_MAX_XRES 1280 -> 2400 VIDEO_ROCKCHIP_MAX_YRES 800 -> 1600 +TARGET_CHROMEBOOK_KEVIN y With this Kevin can boot from SPI flash to a usable U-Boot prompt on the display with the keyboard working, but cannot boot into Linux for unknown reasons. eMMC starts in a working state but fails to re-init, microSD card works but at a lower-than-expected speed, USB works but causes a hang on de-init. There are known workarounds to solve eMMC and USB issues. Cc: Marty E. Plummer <hanetzer@startmail.com> Cc: Simon Glass <sjg@chromium.org> [Alper: commit message, resync config with Bob, update MAINTAINERS, add to Rockchip doc, add Kconfig help message, set regulator] Co-developed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com> Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
2021-12-24 13:43:46 +00:00
rk3399-gru-kevin.dtb \
arm64: dts: rockchip: Add support for Khadas Edge Add devicetree support for Khadas Edge. Khadas Edge is an expandable Rockchip RK3399 board with goldfinger. Specification - Rockchip RK3399 - Dual-Channel 2GB/4GB LPDDR4 - Onboard 16GB/32GB/128GB eMMC - RTL8211FD 1Gbps - AP6356S/AP6398S WiFI/BT - HDMI Out, DP - USB 3.0, 2.0 - USB Type C power and data - 16MB SPI Flash - Programmable MCU Commit details of rk3399-khadas-edge-*.dts sync from Linux 5.3-rc2: "arm64: dts: rockchip: Add support for Khadas Edge/Edge-V/Captain boards" (sha1: c2aacceedc86af87428d998e23a1aca24fd8aa2e) Signed-off-by: Nick Xie <nick@khadas.com> Tested-by: Chris Webb <chris@arachsys.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-30 03:51:14 +00:00
rk3399-khadas-edge.dtb \
arm64: dts: rockchip: Add support for Khadas Edge-Captain Add devicetree support for Khadas Edge-Captain. Khadas Captain is the carrier board for Khadas Edge. Specification - Rockchip RK3399 - Dual-Channel 2GB/4GB LPDDR4 - SD card slot - Onboard 16GB/32GB/128GB eMMC - RTL8211FD 1Gbps - AP6356S/AP6398S WiFI/BT - HDMI Out, DP, MIPI DSI/CSI, eDP - USB 3.0, 2.0 - USB Type C power and data - GPIO expansion ports - Full 4 Lane M.2 Socket - 16MB SPI Flash - IR - Programmable MCU Commit details of rk3399-khadas-edge-*.dts sync from Linux 5.3-rc2: "arm64: dts: rockchip: Add support for Khadas Edge/Edge-V/Captain boards" (sha1: c2aacceedc86af87428d998e23a1aca24fd8aa2e) Signed-off-by: Nick Xie <nick@khadas.com> Tested-by: Chris Webb <chris@arachsys.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-30 03:51:16 +00:00
rk3399-khadas-edge-captain.dtb \
arm64: dts: rockchip: Add support for Khadas Edge-V Add devicetree support for Khadas Edge-V. Khadas Edge-V is a Khadas VIM form factor Rockchip RK3399 board. Specification - Rockchip RK3399 - Dual-Channel 2GB/4GB LPDDR4 - SD card slot - Onboard 16GB/32GB/128GB eMMC - RTL8211FD 1Gbps - AP6356S/AP6398S WiFI/BT - HDMI Out, DP, MIPI DSI/CSI, eDP - USB 3.0, 2.0 - USB Type C power and data - GPIO expansion ports - Full 4 Lane M.2 Socket - 16MB SPI Flash - IR - Programmable MCU Commit details of rk3399-khadas-edge-*.dts sync from Linux 5.3-rc2: "arm64: dts: rockchip: Add support for Khadas Edge/Edge-V/Captain boards" (sha1: c2aacceedc86af87428d998e23a1aca24fd8aa2e) Signed-off-by: Nick Xie <nick@khadas.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-30 03:51:15 +00:00
rk3399-khadas-edge-v.dtb \
rockchip: rk3399: Add Leez P710 support Specification - Rockchip RK3399 - LPDDR4 - TF sd scard slot - eMMC - M.2 B-Key for 4G LTE - AP6256 for WiFi + BT - Gigabit ethernet - HDMI out - 40 pin header - USB 2.0 x 2 - USB 3.0 x 1 - USB 3.0 Type-C x 1 - TYPE-C Power supply Commit details of rk3399-leez-p710.dts sync from linus tree for Linux 5.4-rc1: "arm64: dts: rockchip: Add dts for Leez RK3399 P710 SBC" (sha1: fc702ed49a8668a17343811ee28214d845bfc5e6) Signed-off-by: Andy Yan <andyshrk@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-09-22 10:06:56 +00:00
rk3399-leez-p710.dtb \
rockchip: rk3399: Add Nanopc T4 board support Add initial support for Nanopc T4 board. Specification - Rockchip RK3399 - Dual-Channel 4GB LPDDR3-1866 - SD card slot - 16GB eMMC - RTL8211E 1Gbps - AP6356S WiFI/BT - HDMI In/Out, DP, MIPI DSI/CSI, eDP - USB 3.0, 2.0 - USB Type C power and data - GPIO expansion ports - DC 12V/2A Commit details of rk3399-nanopc-t4.dts sync from Linux 5.1-rc2: "arm64: dts: rockchip: Add NanoPC-T4 IR receiver" (sha1: 95658e21b1707ad7844f873db2fdaa295109a5a3) Tested-by: Daniel Gröber <dxld@darkboxed.org> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-08 05:41:47 +00:00
rk3399-nanopc-t4.dtb \
rockchip: rk3399: Add Nanopi M4 board support Add initial support for Nanopi M4 board. Specification - Rockchip RK3399 - Dual-Channel 4GB LPDDR3-1866 - SD card slot - eMMC socket - RTL8211E 1Gbps - AP6356S WiFI/BT - HDMI In/Out, DP, MIPI DSI/CSI - USB 3.0 x4 - USB Type C power and data - GPIO1, GPIO2 expansion ports - DC5V/3A Commit details of rk3399-nanopi-m4.dts sync from Linux 5.1-rc2: "arm64: dts: rockchip: Refine nanopi4 differences" (sha1: c62ffaf5026d0b7633e62b2cea8450b5543c349a) Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-05-08 05:41:46 +00:00
rk3399-nanopi-m4.dtb \
rockchip: rk3399: Add Nanopi M4 2GB board support commit b2f5da9dd068 ("rockchip: rk3399: Add Nanopi M4 board support") added support for Nanopi M4 board with Dual-Channel 4GB LPDDR3-1866 RAM. This patch adds another variant of NanoPi M4 board with Dual-Channel 2GB DDR3-1866 RAM. Signed-off-by: Deepak Das <deepakdas.linux@gmail.com>
2020-04-26 10:41:50 +00:00
rk3399-nanopi-m4-2gb.dtb \
board: dts: rockchip: Add NanoPi M4B Add initial support for NanoPi M4B, a minor revision of the original NanoPi M4. Commit details of rk3399-nanopi-m4b.dts sync from Linux 5.12-rc4: "arm64: dts: rockchip: Add NanoPi M4B board" (sha1: c7b03115003f7f337ab165542cee37148cf30a8a) Signed-off-by: Alexandre Vicenzi <alexandre.vicenzi@suse.com> Reviewed-by: Kever Yang <kever.yang@rock-cihps.com>
2021-03-26 12:37:10 +00:00
rk3399-nanopi-m4b.dtb \
rockchip: rk3399: Add Nanopi NEO4 board support Add initial support for Nanopi NEO4 board. Specification - Rockchip RK3399 - 1GB DDR3-1866 - SD card slot - eMMC Socket - RTL8211E 1Gbps - AP6212 WiFI/BT - HDMI In/Out, DP, MIPI CSI - USB 3.0, 2.0 - USB Type C power and data - GPIO expansion ports - DC 5V/3A Commit details of rk3399-nanopi-neo4.dts sync from Linux: "arm64: dts: rockchip: Add Nanopi NEO4 initial support" (sha1: 092470b537f19788d957aed12d835a179b606014) Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-17 10:29:39 +00:00
rk3399-nanopi-neo4.dtb \
arm64: rk3399: Add support NanoPi R4s NanoPi R4s is SBC base on Rockchip RK3399 hexa-core processor with dual-Core Cortex-A72 and Mali-T864 GPU with 4GiB(LPDDR4) of RAM, SD card support, including 2 gigabit ethernet(RTL8211E 1Gbps - RTL8111H 1Gbps) and 2 USB 3.0 port. port.It also has two GPIO headers which allows further peripherals to be used. The devicetree file is taken of the rk3399 nanopi4 Linux kernel [1]. [1] https://github.com/torvalds/linux/commit/e7a095908227fb3ccc86d001d9e13c9ae2bef8e6 Signed-off-by: xiaobo <peterwillcn@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-02-27 14:39:11 +00:00
rk3399-nanopi-r4s.dtb \
dts: Makefile: Build rockchip dtbs based on SoC types - Sometimes u-boot specific dtsi files are included automatically which would build for entire rockchip SoC, even-though the respective dtsi should used it for specific family of rockchip SoC. - Sometimes u-boot specific dts nodes or properties can use config macros from respective rockchip family include/configs files, example CONFIG_SPL_PAD_TO. So, it's better to compile the dtbs based on the respective rockchip family types rather than rockchip itself to avoid compilation issues. This patch organize the existing dtb's based on the rockchip family types. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-07 18:21:49 +00:00
rk3399-orangepi.dtb \
arm: dts: rockchip: Add initial DT for Pinebook Pro Sync initial support for Pinebook Pro device tree from Linux 5.7-rc1. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-04-20 19:27:35 +00:00
rk3399-pinebook-pro.dtb \
arm64: dts: rk3399: Add upstream Pinephone Pro dts Initial support for the PinePhone Pro has now landed upstream in Linux 6.1 RC1 so sync the dts from 6.2-rc1 for initial support. Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
2022-12-31 09:23:59 +00:00
rk3399-pinephone-pro.dtb \
rockchip: puma: reorganize devicetrees to actually work and match upstream So far the puma dts files only just included the main puma dtsi without handling the actual baseboard and rk3399-puma.dtsi was very much detached from the variant in the mainline Linux kernel. Recent changes resulted in a strange situation with nonworking puma boards. Commit ab800e5a6f28 ("arm: dts: rockchip: puma: move U-Boot specific bits to u-boot.dtsi") moved the sdram include from rk3399-puma-ddrX.dts to new files rk3399-puma-ddrx-u-boot.dtsi which were never included anywhere though. Commit 167efc2c7a46 ("arm64: dts: rk3399: Sync v5.7-rc1 from Linux") replaced the rk3399-puma.dtsi nearly completely, but in the kernel it definitly depends on a baseboard dts to actually enable peripherals like sd-slot, uarts, etc. So to untagle this and bring the whole thing more in line with mainline Linux, bring the rk3399-puma-haikou.dts over as well, drop the separate DDR-option devicetrees and instead replace them with a puma Kconfig option to select and include the needed DDR variant. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-06-05 10:06:40 +00:00
rk3399-puma-haikou.dtb \
rockchip: rk3399: Add ROC-RK3399-PC support Add initial support for ROC-RK3399-PC board. Specification - Rockchip RK3399 - LPDDR4 4GiB - eMMC slot - SD card slot - RTL8211E 1Gbps - HDMI Out, DP, MIPI DSI/CSI, EDP - PCIe M.2 - USB 2.0, USB-3.0 - USB C Type Commit details of rk3399-roc-pc.dts sync from Linux v5.2: "arm64: dts: rockchip: add support for ROC-RK3399-PC board" (sha1: 8bb878cf20ae10809c36db96993bfce7026d062b) Signed-off-by: Levin Du <djw@t-chip.com.cn> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-26 07:43:54 +00:00
rk3399-roc-pc.dtb \
arm: dts: rk3399: Sync roc-pc-mezzanine from v5.7-rc1 Sync Firefly ROC-RK3399-PC Mezzanine Board dts file from Linux v5.7-rc1. Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-04-28 10:00:18 +00:00
rk3399-roc-pc-mezzanine.dtb \
arm64: dts: rockchip: Add ROCKPi 4A/4B support Rock PI 4 has 3 variants of hardware platforms called RockPI 4A, 4B, and 4C. - Rock PI 4A has no Wif/BT. - Rock PI 4B has AP6256 Wifi/BT, PoE. - Rock PI 4C has AP6256 Wifi/BT, PoE, miniDP, USB Host enable GPIO pin change compared to 4B, 4C So move common nodes, properties into dtsi file and include on respective variant dts files. Use 4B dts into default rock-pi-4 defconfig until we find any solution for dynamic detection of these variants. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-20 18:55:48 +00:00
rk3399-rock-pi-4a.dtb \
rk3399-rock-pi-4b.dtb \
arm64: dts: rockchip: Add Radxa ROCK Pi 4C support Rock PI 4C has AP6256 Wifi/BT, PoE, miniDP, USB Host enabled GPIO pin change compared to 4B, 4C. So, add or enable difference nodes/properties in 4C dts by including common dtsi. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-20 18:55:49 +00:00
rk3399-rock-pi-4c.dtb \
rockchip: rk3399: Add Rock960 CE board support Add board support for Rock960 CE board from Vamrs. This board utilizes common Rock960 family support. Following peripherals are tested and known to work: * USB 2.0 * MMC This commit also adds DDR configuration for LPDDR3-2GiB-1600MHz which is being used on the board. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-09-27 19:03:00 +00:00
rk3399-rock960.dtb \
arm64: dts: rockchip: Add Radxa Rock Pi N10 initial support Rock Pi N10 is a Rockchip RK3399Pro based SBC, which has - VMARC RK3399Pro SOM (as per SMARC standard) from Vamrs. - Compatible carrier board from Radxa. VAMRC RK3399Pro SOM need to mount on top of radxa dalang carrier board for making Rock Pi N10 SBC. So, add initial support for Rock Pi N10 by including rk3399, rk3399pro vamrc-som and raxda dalang carrier board dtsi files. rk3399pro-rock-pi-n10.dts was synced from linux-next v5.7-rc1. Tested - ROCK PI N10 Model B - ROCK PI N10 Model C - Boot from SD Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-06-10 10:36:58 +00:00
rk3399-rockpro64.dtb \
rk3399pro-rock-pi-n10.dtb
dts: Makefile: Build rockchip dtbs based on SoC types - Sometimes u-boot specific dtsi files are included automatically which would build for entire rockchip SoC, even-though the respective dtsi should used it for specific family of rockchip SoC. - Sometimes u-boot specific dts nodes or properties can use config macros from respective rockchip family include/configs files, example CONFIG_SPL_PAD_TO. So, it's better to compile the dtbs based on the respective rockchip family types rather than rockchip itself to avoid compilation issues. This patch organize the existing dtb's based on the rockchip family types. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-07 18:21:49 +00:00
arm: dts: rockchip: Add dts for rk3568 evb Add dts for rk3568 evb, sync from the linux kernel upstream list [0]. [0] https://patchwork.kernel.org/project/linux-rockchip/list/?series=474969 Signed-off-by: Joseph Chen <chenjh@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-06-02 07:58:23 +00:00
dtb-$(CONFIG_ROCKCHIP_RK3568) += \
arm64: dts: rockchip: rk3568: Add Radxa ROCK 3 Model A board support Add Radxa ROCK 3 Model A support. sync rk3568-rock-3a.dts from Linux 6.2.0-rc7 Board Specifications - Rockchip RK3568 - 2/4/8GB LPDDR4 3200MT/s - eMMC socket, SD card slot - GbE LAN - PCIe 3.0/2.0 - M.2 Connector - 3.5mm Audio jack with mic - HDMI 2.0, MIPI DSI/CSI - USB 3.0 Host/OTG, USB 2.0 Host - 40-pin GPIO expansion ports - USB Type C PD 2.0, 9V/2A, 12V/2A, 15V/2A, 20V/2A Refer Linux commit <22a442e6586c> ("arm64: dts: rockchip: add basic dts for the radxa rock3 model a") Signed-off-by: Akash Gajjar <gajjar04akash@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-02-14 15:18:40 +00:00
rk3568-evb.dtb \
arm64: dts: rockchip: rk3566: Add Radxa Compute Module 3 IO Radxa Compute Module 3(CM3) IO board an application board from Radxa and is compatible with Raspberry Pi CM4 IO form factor. Specification: - 1x HDMI, - 2x MIPI DSI - 2x MIPI CSI2 - 1x eDP - 1x PCIe card - 2x SATA - 2x USB 2.0 Host - 1x USB 3.0 - 1x USB 2.0 OTG - Phone jack - microSD slot - 40-pin GPIO expansion header - 12V DC Radxa CM3 needs to mount on top of this IO board in order to create complete Radxa CM3 IO board platform. linux-next commit for the same, commit <8f19828844f2> ("arm64: dts: rockchip: Fix compatible for Radxa CM3") Add support for Radxa CM3 IO Board. Co-developed-by: FUKAUMI Naoki <naoki@radxa.com> Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Co-developed-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com> Signed-off-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-02-17 11:58:37 +00:00
rk3566-radxa-cm3-io.dtb \
arm64: dts: rockchip: rk3568: Add Radxa ROCK 3 Model A board support Add Radxa ROCK 3 Model A support. sync rk3568-rock-3a.dts from Linux 6.2.0-rc7 Board Specifications - Rockchip RK3568 - 2/4/8GB LPDDR4 3200MT/s - eMMC socket, SD card slot - GbE LAN - PCIe 3.0/2.0 - M.2 Connector - 3.5mm Audio jack with mic - HDMI 2.0, MIPI DSI/CSI - USB 3.0 Host/OTG, USB 2.0 Host - 40-pin GPIO expansion ports - USB Type C PD 2.0, 9V/2A, 12V/2A, 15V/2A, 20V/2A Refer Linux commit <22a442e6586c> ("arm64: dts: rockchip: add basic dts for the radxa rock3 model a") Signed-off-by: Akash Gajjar <gajjar04akash@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-02-14 15:18:40 +00:00
rk3568-rock-3a.dtb
arm: dts: rockchip: Add dts for rk3568 evb Add dts for rk3568 evb, sync from the linux kernel upstream list [0]. [0] https://patchwork.kernel.org/project/linux-rockchip/list/?series=474969 Signed-off-by: Joseph Chen <chenjh@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-06-02 07:58:23 +00:00
arm64: dts: rockchip: rk3588: Add Edgeble Neu6 Model A IO Neural Compute Module 6(Neu6) IO board is an industrial form factor ready-to-use IO board from Edgeble AI. IO board offers plenty of peripherals and connectivity options and this patch enables basic eMMC and UART which is enough to successfully boot Linux. Neu6 needs to mount on top of this IO board in order to create a complete Edgeble Neural Compute Module 6(Neu6) IO platform. commit <a5079a534554> ("arm64: dts: rockchip: rk3588: Add Edgeble Neu6 Model A IO") Add support for Edgeble Neu6 Model A IO Board. Signed-off-by: Jagan Teki <jagan@edgeble.ai> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-01-30 14:57:44 +00:00
dtb-$(CONFIG_ROCKCHIP_RK3588) += \
board: rockchip: add Radxa ROCK5B Rk3588 board ROCK 5B is a Rockchip RK3588 based SBC (Single Board Computer) by Radxa. There are tree variants depending on the DRAM size : 4G, 8G and 16G. Specification: Rockchip Rk3588 SoC 4x ARM Cortex-A76, 4x ARM Cortex-A55 4/8/16GB memory LPDDR4x Mali G610MC4 GPU MIPI CSI 2 multiple lanes connector eMMC module connector uSD slot (up to 128GB) 2x USB 2.0, 2x USB 3.0 2x HDMI output, 1x HDMI input Ethernet port 40-pin IO header including UART, SPI, I2C and 5V DC power in USB PD over USB Type-C Size: 85mm x 54mm Kernel commits: a1d3281450ab ("arm64: dts: rockchip: Add rock-5b board") 6fb13f888f2a ("arm64: dts: rockchip: Update sdhci alias for rock-5b") Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-02-22 09:05:12 +00:00
rk3588-edgeble-neu6a-io.dtb \
board: rockchip: Add rk3588 evb rk3588 evb1 v10 is a evalution board from Rockchip, it is a dev board for rockchip and also a reference board for board vendors. Hardware: SoC: RK3588 DRAM: LPDDR4X 8GB Debug: UART2 via USB PCIe: 3x4 *1 SATA *2 HDMI out *2 HDMI IN *1 USB2.0 Host *2 USB3.0 Host *1 Type C *1 MIPI DSI panel dts Sync from Linux v6.2. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Jagan Teki <jagan@edgeble.ai>
2023-03-02 07:12:57 +00:00
rk3588-evb1-v10.dtb \
board: rockchip: add Radxa ROCK5B Rk3588 board ROCK 5B is a Rockchip RK3588 based SBC (Single Board Computer) by Radxa. There are tree variants depending on the DRAM size : 4G, 8G and 16G. Specification: Rockchip Rk3588 SoC 4x ARM Cortex-A76, 4x ARM Cortex-A55 4/8/16GB memory LPDDR4x Mali G610MC4 GPU MIPI CSI 2 multiple lanes connector eMMC module connector uSD slot (up to 128GB) 2x USB 2.0, 2x USB 3.0 2x HDMI output, 1x HDMI input Ethernet port 40-pin IO header including UART, SPI, I2C and 5V DC power in USB PD over USB Type-C Size: 85mm x 54mm Kernel commits: a1d3281450ab ("arm64: dts: rockchip: Add rock-5b board") 6fb13f888f2a ("arm64: dts: rockchip: Update sdhci alias for rock-5b") Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-02-22 09:05:12 +00:00
rk3588-rock-5b.dtb
arm64: dts: rockchip: rk3588: Add Edgeble Neu6 Model A IO Neural Compute Module 6(Neu6) IO board is an industrial form factor ready-to-use IO board from Edgeble AI. IO board offers plenty of peripherals and connectivity options and this patch enables basic eMMC and UART which is enough to successfully boot Linux. Neu6 needs to mount on top of this IO board in order to create a complete Edgeble Neural Compute Module 6(Neu6) IO platform. commit <a5079a534554> ("arm64: dts: rockchip: rk3588: Add Edgeble Neu6 Model A IO") Add support for Edgeble Neu6 Model A IO Board. Signed-off-by: Jagan Teki <jagan@edgeble.ai> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-01-30 14:57:44 +00:00
dts: Makefile: Build rockchip dtbs based on SoC types - Sometimes u-boot specific dtsi files are included automatically which would build for entire rockchip SoC, even-though the respective dtsi should used it for specific family of rockchip SoC. - Sometimes u-boot specific dts nodes or properties can use config macros from respective rockchip family include/configs files, example CONFIG_SPL_PAD_TO. So, it's better to compile the dtbs based on the respective rockchip family types rather than rockchip itself to avoid compilation issues. This patch organize the existing dtb's based on the rockchip family types. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-07 18:21:49 +00:00
dtb-$(CONFIG_ROCKCHIP_RV1108) += \
ARM: rockchip: Add rv1108-elgin-r1 board support Add the initial support for Elgin R1 board, which is based on the RV1108 SoC and has the following features currently supported in U-Boot: - UART - eMMC - USB Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-12-01 14:05:54 +00:00
rv1108-elgin-r1.dtb \
rockchip: Add basic support for evb-rv1108 board Add basic support for rv1108 evb, whith this patch we can boot into u-boot console. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-01 10:01:31 +00:00
rv1108-evb.dtb
dts: Makefile: Build rockchip dtbs based on SoC types - Sometimes u-boot specific dtsi files are included automatically which would build for entire rockchip SoC, even-though the respective dtsi should used it for specific family of rockchip SoC. - Sometimes u-boot specific dts nodes or properties can use config macros from respective rockchip family include/configs files, example CONFIG_SPL_PAD_TO. So, it's better to compile the dtbs based on the respective rockchip family types rather than rockchip itself to avoid compilation issues. This patch organize the existing dtb's based on the rockchip family types. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-07 18:21:49 +00:00
ARM: dts: rockchip: rv1126: Add Edgeble Neural Compute Module 2(Neu2) IO Neural Compute Module 2(Neu2) IO board is an industrial form factor evaluation board from Edgeble AI. General features: - microSD slot - MIPI DSI connector - 2x USB Host - 1x USB OTG - Ethernet - mini PCIe - Onboard PoE - RS485, RS232, CAN - Micro Phone array - Speaker - RTC battery slot - 40-pin expansion Neu2 needs to mount on top of this IO board in order to create complete Edgeble Neural Compute Module 2(Neu2) IO platform. Add support for it. Signed-off-by: Jagan Teki <jagan@edgeble.ai>
2022-12-14 17:51:09 +00:00
dtb-$(CONFIG_ROCKCHIP_RV1126) += \
rv1126-edgeble-neu2-io.dtb
arm: add support for SoC s5p4418 (cpu) / nanopi2 board Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01: - SPL not supported yet --> no spl-dir in arch/arm/cpu/armv7/s5p4418/. Appropriate line in Makefile removed. - cpu.c: '#include <cpu_func.h>' added. - arch/arm/cpu/armv7/s5p4418/u-boot.lds removed, is not required anylonger. - "obj-$(CONFIG_ARCH_NEXELL) += s5p-common/" added to arch/arm/cpu/armv7/Makefile since s5p-common/pwm.c is used instead of drivers/pwm/pwm-nexell.c. - s5p4418.dtsi: '#include "../../../include/generated/autoconf.h"' removed, is not necessary, error at out-of-tree building. '#ifdef CONFIG_CPU_NXP4330'-blocks (2x) removed. Some minor changes regarding mmc. 'u-boot,dm-pre-reloc' added to dp0 because of added DM_VIDEO support. - board/s5p4418/ renamed to board/friendlyarm/ - All s5p4418-boards except nanopi2 removed because there is no possibility to test the other boards. - Kconfig: Changes to have a structure like mach-bcm283x (RaspberryPi), e.g. "config ..." entries moved from/to other Kconfig. - "CONFIG_" removed from several s5p4418/nanopi2 specific defines because the appropriate values do not need to be configurable. - nanopi2/board.c: All getenv(), getenv_ulong(), setenv() and saveenv() renamed to env_get(), env_get_ulong(), env_set() and env_save(), respectively. MACH_TYPE_S5P4418 is not defined anymore, therefore appropriate code removed (not necessary for DT-kernels). - nanopi2/onewire.c: All crc8() renamed to crc8_ow() because crc8() is already defined in lib/crc8.c (with different parameters). - dts: "nexell,s5pxx18-i2c" used instead of "i2c-gpio", i2c0 and i2c1 added. gmac-, ehci- and dwc2otg-entries removed because the appropriate functionality is not supported yet. New mmc-property "mmcboost" added. s5p4418-pinctrl.dtsi: gmac-entries removed, mmc- and i2c-entries added. - '#ifdef CONFIG...' changed to 'if (IS_ENABLED(CONFIG...))' where possible (and similar). Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
2020-07-10 17:07:37 +00:00
dtb-$(CONFIG_ARCH_S5P4418) += \
s5p4418-nanopi2.dtb
arm: add initial support for Amlogic Meson and ODROID-C2 This adds platform code for the Amlogic Meson GXBaby (S905) SoC and a board definition for ODROID-C2. This initial submission only supports UART and Ethernet (through the existing Designware driver). DTS files are the ones submitted to Linux arm-soc for 4.7 [1]. [1] https://patchwork.ozlabs.org/patch/603583/ Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-05-08 06:30:16 +00:00
dtb-$(CONFIG_ARCH_MESON) += \
ARM: dts: sort Amlogic Makefile section Alpha sort the Amlogic dtb list (same as the kernel). Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-09-15 01:46:56 +00:00
meson-axg-s400.dtb \
meson-axg-jethome-jethub-j100.dtb \
ARM: dts: sync meson-gxbb-nanopi-k2 from Linux 4.17 Get the meson-gxbb-nanopi-k2.dts file from Linux 4.17. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-06-25 14:50:16 +00:00
meson-gxbb-nanopi-k2.dtb \
ARM: dts: Synchronize Amlogic from Linux Mainline 4.13.5 Synchronize the Amlogic ARM64 dts from mainline Linux 4.13.5 In the preparation of the support of the Amlogic P212 board, import the corresponding meson-gxl-s905x-p212.dts file. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Beniamino Galvani <b.galvani@gmail.com>
2017-10-12 13:50:30 +00:00
meson-gxbb-odroidc2.dtb \
boards: amlogic: Add FriendlyElec NanoPi K2 board support This adds platform code for the FriendlyElec NanoPi K2 board based on a Meson GXBB (S905) SoC with the Meson GXBB configuration. This initial submission only supports: - UART - MMC/SDCard - Ethernet - Reset Controller - Clock controller Cc: Yuefei Tan <yftan@friendlyarm.com> Signed-off-by: Thomas McKahan <tonymckahan@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-06-25 14:50:17 +00:00
meson-gxbb-nanopi-k2.dtb \
ARM: dts: meson: add p200 and p201 boards This adds the device trees for p200 and p201 boards. Synced from kernel 5.0.0 Commit: a667cb7a94d4 ("Merge branch 'akpm' (patches from Andrew)") Signed-off-by: Mohammad Rasim <mohammad.rasim96@gmail.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-03-23 11:53:27 +00:00
meson-gxbb-p200.dtb \
meson-gxbb-p201.dtb \
ARM: dts: add support for WeTek Hub and WeTek Play2 Import the dts files from linux-amlogic/for-next (Linux 6.4-rc1) and add the old PHY reset bindings for dwmac to the u-boot.dtsi until we support the new bindings in the PHY node. Without this the PHY is not functional in u-boot or Linux. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230323143142.780306-13-christianshewitt@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-03-23 14:31:40 +00:00
meson-gxbb-wetek-hub.dtb \
meson-gxbb-wetek-play2.dtb \
ARM: dts: Import libretech-ac DT from Linux 5.0 Import Linux 5.0 DT from 1c163f4c7b3f ("Linux 5.0") for the meson-gxl-s805x-libretech-ac board and the corresponding changes in meson-gxl.dtsi. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-03-26 10:20:34 +00:00
meson-gxl-s805x-libretech-ac.dtb \
arm64: dts: meson: add libretech-pc support Add support for the Amlogic based libretech-pc platform. This platform comes with 2 variant, based on the s905d or s912 SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> [narmstrong: update board/amlogic/q200/MAINTAINERS] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-03-05 11:12:40 +00:00
meson-gxl-s905d-libretech-pc.dtb \
ARM: amlogic: add JetHub D1/H1 device support Add support for new home automation devices. JetHome Jethub D1 (http://jethome.ru/jethub-d1) is a home automation controller with the following features: - DIN Rail Mounting case - Amlogic A113X (ARM Cortex-A53) quad-core up to 1.5GHz - no video out - 512Mb/1GB DDR3 - 8/16GB eMMC flash - 1 x USB 2.0 - 1 x 10/100Mbps ethernet - WiFi / Bluetooth AMPAK AP6255 (Broadcom BCM43455) IEEE 802.11a/b/g/n/ac, Bluetooth 4.2. - TI CC2538 + CC2592 Zigbee Wireless Module with up to 20dBm output power and Zigbee 3.0 support. - 2 x gpio LEDS - GPIO user Button - 1 x 1-Wire - 2 x RS-485 - 4 x dry contact digital GPIO inputs - 3 x relay GPIO outputs - DC source with a voltage of 9 to 56 V / Passive POE JetHome Jethub H1 (http://jethome.ru/jethub-h1) is a home automation controller with the following features: - Square plastic case - Amlogic S905W (ARM Cortex-A53) quad-core up to 1.5GHz - no video out - 1GB DDR3 - 8/16GB eMMC flash - 2 x USB 2.0 - 1 x 10/100Mbps ethernet - WiFi / Bluetooth RTL8822CS IEEE 802.11a/b/g/n/ac, Bluetooth 5.0. - TI CC2538 + CC2592 Zigbee Wireless Module with up to 20dBm output power and Zigbee 3.0 support. - MicroSD 2.x/3.x/4.x DS/HS cards. - 1 x gpio LED - ADC user Button - DC source 5V microUSB with serial console Patches from: - JetHub H1 https://lore.kernel.org/r/20210915085715.1134940-4-adeep@lexina.in https://git.kernel.org/amlogic/c/abfaae24ecf3e7f00508b60fa05e2b6789b8f607 - JetHub D1 https://lore.kernel.org/r/20210915085715.1134940-5-adeep@lexina.in https://git.kernel.org/amlogic/c/8e279fb2903990cc6296ec56b3b80b2f854b6c79 Signed-off-by: Vyacheslav Bocharov <adeep@lexina.in> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: removed unused variable value] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-09-20 08:40:15 +00:00
meson-gxl-s905w-jethome-jethub-j80.dtb \
ARM: dts: sort Amlogic Makefile section Alpha sort the Amlogic dtb list (same as the kernel). Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-09-15 01:46:56 +00:00
meson-gxl-s905x-khadas-vim.dtb \
arm: Add Khadas VIM support based on Meson GXL family This adds platform code for the Khadas VIM board based on a Meson GXL (S905X) SoC with the Meson GXL configuration. This initial submission supports UART, MMC/SDCard and Ethernet with the Internal RMII PHY. The meson-gxl-s905x-khadas-vim.dts is synchronised from the linux 4.13 stable tree as of 4.13.8. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-11-27 09:16:20 +00:00
meson-gxl-s905x-libretech-cc.dtb \
arm64: dts: import libretech-cc-v2 from linux v5.10-rc1 Sync the libretech cc v2 device tree from Linux v5.10-rc1 commit 3650b228f83a ("Linux 5.10-rc1") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-11-06 09:45:54 +00:00
meson-gxl-s905x-libretech-cc-v2.dtb \
ARM: dts: sort Amlogic Makefile section Alpha sort the Amlogic dtb list (same as the kernel). Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-09-15 01:46:56 +00:00
meson-gxl-s905x-p212.dtb \
ARM: dts: add support for Beelink GT1 Ultimate Import the device-tree from linux-amlogic/for-next (Linux 6.3-rc1). Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Karl Chan <exxxxkc@getgoogleoff.me> Link: https://lore.kernel.org/r/f5a8db4e-b2d0-e00a-cc4f-01a4f794c761@yahoo.com [narmstrong: fixed imported dt file] Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-03-27 20:11:52 +00:00
meson-gxm-gt1-ultimate.dtb \
ARM: dts: Sync Amlogic Meson AXG DT from Linux 4.20-rc1 Synchronize the Amlogic AXG Device Tree files and bindings include from the recent Linux 4.20-rc1, because it includes patches fixing support for U-boot. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-09-05 13:56:52 +00:00
meson-gxm-khadas-vim2.dtb \
arm64: dts: meson: add libretech-pc support Add support for the Amlogic based libretech-pc platform. This platform comes with 2 variant, based on the s905d or s912 SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> [narmstrong: update board/amlogic/q200/MAINTAINERS] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-03-05 11:12:40 +00:00
meson-gxm-s912-libretech-pc.dtb \
ARM: dts: import WeTek Core2 DTs from Linux 5.10 Import the WeTek Core2 and supporting meson-gx-p23x-q20x.dtsi files from Linux 5.10. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-12-15 12:32:12 +00:00
meson-gxm-wetek-core2.dtb \
ARM: dts: add support for Radxa Zero Import the initial dts queued for Linux 5.16.y Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-09-15 01:46:57 +00:00
meson-g12a-radxa-zero.dtb \
ARM: dts: Import Amlogic G12A SEI510 DT from Linux 5.3-rc1 Import Linux 5.2-rc1 sei510 DT from 5f9e832c1370 ("Linus 5.3-rc1") for the meson-g12a-sei510 board. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-03-26 09:59:56 +00:00
meson-g12a-sei510.dtb \
ARM: dts: sort Amlogic Makefile section Alpha sort the Amlogic dtb list (same as the kernel). Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-09-15 01:46:56 +00:00
meson-g12a-u200.dtb \
ARM: dts: add support for BananaPi M2S Import the device-tree from linux-amlogic/for-next (Linux 6.4-rc1) and omit the NPU node from the A311D board variant dts as this is not supported under U-Boot. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230323143142.780306-7-christianshewitt@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-03-23 14:31:34 +00:00
meson-g12b-a311d-bananapi-m2s.dtb \
ARM: dts: sort Amlogic Makefile section Alpha sort the Amlogic dtb list (same as the kernel). Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-09-15 01:46:56 +00:00
meson-g12b-a311d-khadas-vim3.dtb \
ARM: dts: add support for BananaPi M2-Pro Import the board dts from the linux-amlogic/for-next (6.4-rc1) branch. This involves spliting the BPI-M5 dts into a dtsi and then reusing this for the M2-Pro. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230323143142.780306-4-christianshewitt@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-03-23 14:31:31 +00:00
meson-g12b-bananapi-cm4-cm4io.dtb \
meson-g12b-gsking-x.dtb \
ARM: dts: import Beelink GT-King/Pro DTs from Linux 5.10 Import the Beelink GT-King/Pro and supporting meson-g12b-w400.dtsi file from Linux 5.10. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-12-18 08:45:41 +00:00
meson-g12b-gtking.dtb \
meson-g12b-gtking-pro.dtb \
ARM: dts: sync Amlogic ARM64 DT from v6.2-rc1 This syncs the Amlogic G12A, G12B & SM1 base DT + the Odroid Go Ultra DT from Linux v6.2-rc1 from commmit [1]. [1] 1b929c02afd3 ("Linux 6.2-rc1") Link: https://lore.kernel.org/r/20230119-u-boot-odroid-go-ultra-v1-1-f96bab9db396@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-19 13:44:17 +00:00
meson-g12b-odroid-go-ultra.dtb \
arm: dts: Import and update DT for Khadas VIM3 In Linux meson-g12-common.dtsi was introduced as well as new g12b nodes and headers, as dependencies of new meson-g12b-a311d-khadas-vim3.dts. Copied from da0c9ea146cb ("Linux 5.4-rc2") Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-09 14:03:54 +00:00
meson-g12b-odroid-n2.dtb \
ARM: dts: Import Odroid-N2L support Import Odroid-N2L support posted at [1] and merged for Linux v6.3-rc1. [1] https://lore.kernel.org/all/20230122-topic-odroid-n2l-upstream-initial-v2-0-8d3fea6d403d@linaro.org/ Link: https://lore.kernel.org/r/20230126-u-boot-odroid-n2l-v1-1-c60f695e0f6c@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-26 09:48:20 +00:00
meson-g12b-odroid-n2l.dtb \
ARM: dts: sync Amlogic GX & AXG from Linux 5.10-rc1 Synced from Linux commit 3650b228f83a ("Linux 5.10-rc1") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-10-02 07:47:37 +00:00
meson-g12b-odroid-n2-plus.dtb \
ARM: dts: add support for Radxa Zero2 Import the device-tree from linux-amlogic/for-next (Linux 6.4-rc1) to support the Radxa-Zero2 board. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230323143142.780306-10-christianshewitt@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-03-23 14:31:37 +00:00
meson-g12b-radxa-zero2.dtb \
ARM: dts: add support for BananaPi M2-Pro Import the board dts from the linux-amlogic/for-next (6.4-rc1) branch. This involves spliting the BPI-M5 dts into a dtsi and then reusing this for the M2-Pro. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230323143142.780306-4-christianshewitt@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-03-23 14:31:31 +00:00
meson-sm1-bananapi-m2-pro.dtb \
ARM: meson: Sync Amlogic DT from Linux 5.14 Import Amlogic DT changes from Linux commit 7d2a07b76933 ("Linux 5.14"), dt-bindings clock changes and new meson-g12b-gsking-x.dts, meson-sm1-bananapi-m5 & odroid-hc4 boards. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-09-17 07:37:00 +00:00
meson-sm1-bananapi-m5.dtb \
ARM: dts: Import Khadas VIM3L DT from Linux 5.5-rc1 Import the Khadas VIM3L device-tree from [1] [1] e42617b825f8 ("Linux 5.5-rc1") Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-12-11 09:20:53 +00:00
meson-sm1-khadas-vim3l.dtb \
ARM: dts: sync amlogic G12A/G12B/SM1 DT from Linux 5.8-rc1 This imports the changes and the new Odroid-C4 board from the Linux commit b3a9e3b9622a ("Linux 5.8-rc1"). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Anand Moon <linux.amoon@gmail.com>
2020-04-24 02:58:30 +00:00
meson-sm1-odroid-c4.dtb \
ARM: meson: Sync Amlogic DT from Linux 5.14 Import Amlogic DT changes from Linux commit 7d2a07b76933 ("Linux 5.14"), dt-bindings clock changes and new meson-g12b-gsking-x.dts, meson-sm1-bananapi-m5 & odroid-hc4 boards. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-09-17 07:37:00 +00:00
meson-sm1-odroid-hc4.dtb \
ARM: dts: Import SEI610 DT from Linux 5.4-rc2 Import the Amlogic SM1 DT and the SEI610 board DT from [1] [1] da0c9ea146cb ("Linux 5.4-rc2") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-11 15:33:54 +00:00
meson-sm1-sei610.dtb
rename symbol: CONFIG_TEGRA -> CONFIG_ARCH_TEGRA Have this symbol follow the pattern of all other such symbols. Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2020-05-06 12:02:41 +00:00
dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
dts: generate multiple device tree blobs It is convenient to have all device trees on the same SoC compiled. It allows for later easy repackaging without the need to re-run the make file. - Build device trees with the same SoC under arch/$(ARCH)/dts - Copy the one specified by CONFIG_DEFAULT_DEVICE_TREE or DEVICE_TREE=... to dts/dt.dtb Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-05 02:28:27 +00:00
tegra20-medcom-wide.dtb \
tegra20-paz00.dtb \
tegra20-plutux.dtb \
tegra20-seaboard.dtb \
tegra20-tec.dtb \
tegra20-trimslice.dtb \
tegra20-ventana.dtb \
ARM: tegra: rename colibri_t20 board/configuration/device-tree In accordance with our other modules supported by U-Boot and as agreed upon for Apalis/Colibri T30 get rid of the carrier board in the board/ configuration/device-tree naming. While at it also bring the prompt more in line with our other products. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-03-26 00:31:54 +00:00
tegra20-colibri.dtb \
arm: tegra: initial support for apalis t30 This patch adds board support for the Toradex Apalis T30 a computer on module which can be used on different carrier boards. For the sake of ease of use we do not distinguish between different carrier boards for now as the base module features are deemed sufficient enough for regular booting. The following functionality is working so far: - eMMC boot and environment storage - Gigabit Ethernet (once Thierry's PCIe as well as my E1000 resp. i210 fixes hit mainline) - MMC/SD cards (both 8-bit as well as 4-bit slot) - USB client/host (dual role port as client e.g. for DFU/UMS, other two ports as host) Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2014-09-05 08:18:38 +00:00
tegra30-apalis.dtb \
dts: generate multiple device tree blobs It is convenient to have all device trees on the same SoC compiled. It allows for later easy repackaging without the need to re-run the make file. - Build device trees with the same SoC under arch/$(ARCH)/dts - Copy the one specified by CONFIG_DEFAULT_DEVICE_TREE or DEVICE_TREE=... to dts/dt.dtb Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-05 02:28:27 +00:00
tegra30-beaver.dtb \
tegra30-cardhu.dtb \
ARM: tegra: add Colibri T30 board support This adds board support for the Toradex Colibri T30 module. Working functions: - SD card boot - eMMC environment and boot - USB host/USB client (on the dual role port) - Network (via ASIX USB) Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Tom Warren <twarren@nvidia.com>
2014-08-05 21:27:30 +00:00
tegra30-colibri.dtb \
dts: generate multiple device tree blobs It is convenient to have all device trees on the same SoC compiled. It allows for later easy repackaging without the need to re-run the make file. - Build device trees with the same SoC under arch/$(ARCH)/dts - Copy the one specified by CONFIG_DEFAULT_DEVICE_TREE or DEVICE_TREE=... to dts/dt.dtb Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-05 02:28:27 +00:00
tegra30-tec-ng.dtb \
venice2: move device tree to fix build error Commit 5ab502cb gathered all device tree sources to arch/$(ARCH)/dts/. So tegra124-venice2.dts also must go to arch/arm/dts directory to build venice2 board. (Commit 5ab502cb had been posted before venice2 board support was merged. So an unvisible conflict happened.) Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@ti.com>
2014-02-20 08:18:42 +00:00
tegra114-dalmore.dtb \
arm: tegra: initial support for apalis tk1 This patch adds board support for the Toradex Apalis TK1 a computer on module which can be used on different carrier boards. The module consists of a Tegra TK1 SoC, a PMIC solution, 2 GB of DDR3L RAM, a bunch of level shifters, an eMMC, a TMP451 temperature sensor chip, an I210 gigabit Ethernet controller and a SGTL5000 audio codec. Furthermore, there is a Kinetis MK20DN512 companion micro controller for analogue, CAN and resistive touch functionality. For the sake of ease of use we do not distinguish between different carrier boards for now as the base module features are deemed sufficient enough for regular booting. The following functionality is working so far: - eMMC boot, environment storage and Toradex factory config block - Gigabit Ethernet - MMC/SD cards (both MMC1 as well as SD1 slot) - USB client/host (dual role OTG port as client e.g. for DFU/UMS or host, other two ports as host) Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2017-04-01 22:43:16 +00:00
tegra124-apalis.dtb \
ARM: tegra: add Jetson TK1 board Jetson TK1 is an NVIDIA Tegra124 reference board, which shares much of its design with Venice2. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2014-03-25 17:39:33 +00:00
tegra124-jetson-tk1.dtb \
ARM: tegra: Add support for nyan-big board Nyan-big is a Tegra124 clamshell board that is very similar to venice2, but it has a different panel, the sdcard cd and wp sense are flipped, and it has a different revision of the AS3722 PMIC. This is the Acer Chromebook 13 CB5-311-T7NN (13.3-inch HD, NVIDIA Tegra K1, 2GB). The display is not currently supported, so it should boot on other nyan-based Chromebooks also, but only the device tree for nyan-big is provided here. The device tree file is from Linux but with features removed which are unlikely to be supported in U-Boot soon (regulators, pinmux). Also the addresses are updated to 32-bit. Signed-off-by: Allen Martin <amartin@nvidia.com> Signed-off-by: Simon Glass <sjg@chromium.org> (rebase, change to 'nyan-big', fix pinmux that resets nyan-big)
2014-12-04 13:36:30 +00:00
tegra124-nyan-big.dtb \
ARM: tegra: Add support for TK1-SOM board from Colorado Engineering The Colorado TK1 SOM is a small form factor board similar to the Jetson TK1. The main differences lie in the pinmux, and in that the PCIe controller is set to use in 4lanes+1lane, rather than 2+2. The pinmux header here was generated from a spreadsheet provided by Colorado Engineering using the tegra-pinmux scripts. The spreadsheet was converted from v09 to v11 by me. Signed-off-by: Peter Chubb <peter.chubb@data61.csiro.au> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-08-30 22:54:46 +00:00
tegra124-cei-tk1-som.dtb \
P2571: dts: Add DT file for Tegra210 P2571 board Based on T124 Venice2. SDMMC1 is SD-card slot. Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-02-13 21:39:53 +00:00
tegra124-venice2.dtb \
ARM: tegra: use numeric versioning for p2771-0000 The board ID EEPROM and board ID stickers on p2771-0000 will use a numeric versioning scheme, with version numbers such as 000/100/200/300/400/500. Within NVIDIA, these versions are also known as A00/A01/A02/A03/A04/B00. However, that numbering scheme is not easily visible outside of NVIDIA, and so does not make much sense to use. Convert U-Boot to use the readily visible numeric scheme. Also, it turns out that the current A02 DT actually applies to board versions 000/100/200 (A00..A02). Consequently rename this to 000 not 200 so that all U-Boot builds are named after the first version of the HW they support. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-08-30 16:22:07 +00:00
tegra186-p2771-0000-000.dtb \
tegra186-p2771-0000-500.dtb \
ARM: tegra: Add p2371-0000 board P2371-0000 is a P2581 or P2530 CPU board married to a P2595 I/O board. The combination contains SoC, DRAM, eMMC, SD card slot, HDMI, USB micro-B port, Ethernet via USB3, USB3 host port, SATA, a GPIO expansion header, and an analog audio jack. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-08-05 17:52:08 +00:00
tegra210-p2371-0000.dtb \
ARM: tegra: Add p2371-2180 board P2371-2180 is a P2180 CPU board married to a P2597 I/O board. The combination contains SoC, DRAM, eMMC, SD card slot, HDMI, USB micro-B port, Ethernet via USB3, USB3 host port, SATA, PCIe, and two GPIO expansion headers. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-08-14 04:34:22 +00:00
tegra210-p2371-2180.dtb \
ARM: tegra: Add NVIDIA Jetson Nano Developer Kit support The Jetson Nano Developer Kit is a Tegra X1-based development board. It is similar to Jetson TX1 but it is not pin compatible. It features 4GB of LPDDR4, a SPI NOR flash for early boot firmware and an SD card slot used for storage. HDMI 2.0 or DP 1.2 are available for display, four USB ports (3 USB 2.0 and 1 USB 3.0) can be used to attach a variety of peripherals and a PCI Ethernet controller provides onboard network connectivity. NVMe support has also been added. Env save is at the end of QSPI (4MB-8K). A 40-pin header on the board can be used to extend the capabilities and exposed interfaces of the Jetson Nano. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com> Tested-by: Peter Robinson <pbrobinson@gmail.com>
2020-02-28 23:17:07 +00:00
tegra210-p2571.dtb \
tegra210-p3450-0000.dtb
arm: mvebu: Add basic Armada XP / 38x dtsi/dts files These will be needed by the upcoming DM (driver model) support for the Armada XP / 38x SoC's. This will provide DT based probing. The dts files are copied 1:1 from the Linux kernel release v4.2. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
2015-08-31 05:33:57 +00:00
arm: mvebu: dts: Build only arch-compatible dts files 64-bit Armada DTS files are not build correctly during compilation of 32-bit Armada boards and vice versa. So fix makefile build system to compile only those dts files which are compatible for the current build (64-bit Armada DTS files only for 64-bit builds and 32-bit Armada DTS files only for 32-bit builds). Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-08-05 11:37:25 +00:00
ifdef CONFIG_ARMADA_32BIT
arm: mvebu: dts: Makefile: Compile Armada 375 dtb in a separate step This patch changes the compilation, so that the Armada 375 board(s) are compiled in a separate step. This is necessary for the timer dts conversion, as A375 has a different / timer description in the dts. Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Tony Dinh <mibodhi@gmail.com>
2022-09-15 14:20:40 +00:00
ifdef CONFIG_ARMADA_375
dtb-$(CONFIG_ARCH_MVEBU) += \
armada-375-db.dtb
else
arm: mvebu: Add basic Armada XP / 38x dtsi/dts files These will be needed by the upcoming DM (driver model) support for the Armada XP / 38x SoC's. This will provide DT based probing. The dts files are copied 1:1 from the Linux kernel release v4.2. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
2015-08-31 05:33:57 +00:00
dtb-$(CONFIG_ARCH_MVEBU) += \
arm: mvebu: dts: Sort Armada series dts alphabetically Sort the Armada series dts in the Makefile alphabetically prior to adding new board support. Signed-off-by: Josip Kelečić <josip.kelecic@sartura.hr> Reviewed-by: Luka Kovacic <luka.kovacic@sartura.hr> Reviewed-by: Stefan Roese <sr@denx.de>
2020-02-13 13:38:49 +00:00
armada-385-atl-x530.dtb \
armada-385-atl-x530DP.dtb \
armada-385-db-88f6820-amc.dtb \
arm: mvebu: Add support for Synology DS116 (Armada 385) Synology DS116 is a NAS based on Marvell Armada 385 SoC. Board Specification: - Marvel MV88F6820 Dual Core at 1.8GHz - 1 GiB DDR3 RAM - 8MB Macronix mx25l6405d SPI flash - I2C - 2x USB 3.0 - 1x GBE LAN port (PHY: Marvell 88E1510) - 1x SATA (6 Gbps) - 3x LED - PIC16F1829 (connected to uart1) - GPIO fan - serial console Note that this patch depends on the add-support for Thecus N2350 patch: https://patchwork.ozlabs.org/project/uboot/patch/20230201231306.7010-1-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com>
2023-02-09 22:00:03 +00:00
armada-385-synology-ds116.dtb \
arm: mvebu: Add support for Thecus N2350 (Armada 385) board Thecus N2350 is a NAS based on Marvell Armada 385 SoC. Specification: - Processor: Marvel MV88F6820 Dual Core at 1GHz - 1 GiB DDR4 RAM - 4MB Macronix mx25l3205d SPI flash - 512MB Hynix H27U4G8F2DTR-BC NAND flash - I2C - 2x USB 3.0 - 1x GBE LAN port (PHY: Marvell 88E1510) - 2x SATA (hot swap slots) - 3x buttons - 10x LEDS - serial console Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2023-02-01 23:13:05 +00:00
armada-385-thecus-n2350.dtb \
arm: mvebu: dts: Sort Armada series dts alphabetically Sort the Armada series dts in the Makefile alphabetically prior to adding new board support. Signed-off-by: Josip Kelečić <josip.kelecic@sartura.hr> Reviewed-by: Luka Kovacic <luka.kovacic@sartura.hr> Reviewed-by: Stefan Roese <sr@denx.de>
2020-02-13 13:38:49 +00:00
armada-385-turris-omnia.dtb \
arm: mvebu: Add SolidRun ClearFog Armada 38x initial support This patch adds basic support for the SolidRun ClearFog Armada 38x based board to mainline U-Boot. Supported interfaces / devices are: - DDR3 - UART - MMC - Ethernet port 0 (connected to dedicated PHY) - I2C The included DT source was taken from Russell King's ftp server: http://www.home.arm.linux.org.uk/~rmk/clearfog/ With only minor modifications, like the addition of some aliases and the "u-boot,dm-pre-reloc" property. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Rabeeh Khoury <rabeeh@solid-run.com> Cc: Luka Perkov <luka.perkov@sartura.hr>
2015-10-20 13:14:47 +00:00
armada-388-clearfog.dtb \
arm: mvebu: Add basic Armada XP / 38x dtsi/dts files These will be needed by the upcoming DM (driver model) support for the Armada XP / 38x SoC's. This will provide DT based probing. The dts files are copied 1:1 from the Linux kernel release v4.2. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
2015-08-31 05:33:57 +00:00
armada-388-gp.dtb \
arm: mvebu: Add Helios4 Armada 38x initial support The helios4 is built on the SolidRun Armada 38x SOM. The port os based on the ClearFog board, using information from https://github.com/helios-4/u-boot-marvell as well as dtb input from https://github.com/helios-4/linux-marvell Signed-off-by: Dennis Gilmore <dennis@ausil.us> Signed-off-by: Dennis Gilmore <dgilmore@redhat.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-06-12 00:39:53 +00:00
armada-388-helios4.dtb \
arm: mvebu: dts: Sort Armada series dts alphabetically Sort the Armada series dts in the Makefile alphabetically prior to adding new board support. Signed-off-by: Josip Kelečić <josip.kelecic@sartura.hr> Reviewed-by: Luka Kovacic <luka.kovacic@sartura.hr> Reviewed-by: Stefan Roese <sr@denx.de>
2020-02-13 13:38:49 +00:00
armada-38x-controlcenterdc.dtb \
armada-xp-crs305-1g-4s.dtb \
arm: mvebu: Add CRS305-1G-4S Bit board MikroTik CRS305-1G-4S Bit board has a switch chip with an integrated Marvell Prestera 98DX3236 CPU. The Bit board variant is added, which has a bigger Macronix flash. Add basic U-Boot, UART and Winbond SPI flash support. Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Jakov Petrina <jakov.petrina@sartura.hr> Reviewed-by: Stefan Roese <sr@denx.de>
2020-07-23 08:56:36 +00:00
armada-xp-crs305-1g-4s-bit.dtb \
arm: mvebu: Add CRS326-24G-2S board MikroTik CRS326-24G-2S board has a switch chip with an integrated Marvell Prestera 98DX3236 CPU. This commit includes two board variants, namely the factory default one and a Bit variant. The Bit board variant has a bigger Macronix flash. Add basic U-Boot, UART and SPI flash support. Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Jakov Petrina <jakov.petrina@sartura.hr> Reviewed-by: Stefan Roese <sr@denx.de>
2020-07-23 08:56:37 +00:00
armada-xp-crs326-24g-2s.dtb \
armada-xp-crs326-24g-2s-bit.dtb \
arm: mvebu: Add CRS328-4C-20S-4S board MikroTik CRS328-4C-20S-4S board has a switch chip with an integrated Marvell Prestera 98DX3236 CPU. This commit includes two board variants, namely the factory default one and a Bit variant. The Bit board variant has a bigger Macronix flash. Add basic U-Boot, UART and SPI flash support. Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Jakov Petrina <jakov.petrina@sartura.hr> Reviewed-by: Stefan Roese <sr@denx.de>
2020-07-23 08:56:38 +00:00
armada-xp-crs328-4c-20s-4s.dtb \
armada-xp-crs328-4c-20s-4s-bit.dtb \
arm: mvebu: dts: Sort Armada series dts alphabetically Sort the Armada series dts in the Makefile alphabetically prior to adding new board support. Signed-off-by: Josip Kelečić <josip.kelecic@sartura.hr> Reviewed-by: Luka Kovacic <luka.kovacic@sartura.hr> Reviewed-by: Stefan Roese <sr@denx.de>
2020-02-13 13:38:49 +00:00
armada-xp-db-xc3-24g4xg.dtb \
arm: mvebu: Add armada-xp-maxbcm.dts for maxbcm board This is needed for the upcoming ethernet DM conversion of the maxbcm board. The configuration of the PHY is then extracted from the DT instead of using the defines from the config header. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
2015-11-19 10:03:25 +00:00
armada-xp-gp.dtb \
mvebu: Support Synology DS414 This adds support for the MV78230 based DS414 NAS by Synology. The relevant bits have been extracted from the 'synogpl-5004-armadaxp' package Synology kindly published, garnished with a fair amount of trial-and-error. Sadly, support is far from perfect. The major parts I have failed in are SATA and XHCI support. Details about these and some other things follow: Device Tree ----------- The device tree file armada-xp-synology-ds414.dts has been copied from Linux and enhanced by recent U-Boot specific changes to armada-xp-gp.dts. SATA Support ------------ There is a Marvell 88SX7042 controller attached to PCIe which is supported by Linux's sata_mv driver but sadly not U-Boot's sata_mv. I'm not sure if extending the latter to support PCI devices is worth the effort at all. Porting sata_mv from Linux exceeded my brain's capacities. :( XHCI Support ------------ There is an EtronTech EJ168A XHCI controller attached to PCIe which drives the two rear USB3 ports. After a bit of playing around I managed to get it recognized by xhci-pci, but never was able to access any devices attached to it. Enabling it in ds414 board config shows that it does not respond to commands for whatever reason. The (somewhat) bright side to it is that it is not even supported in Synology's customized U-Boot, but that also means nowhere to steal the relevant bits from. EHCI Support ------------ This seems functional after issuing 'usb start'. At least it detects USB storage devices, and IIRC reading from them was OK. OTOH Linux fails to register the controller if 'usb start' wasn't given before in U-Boot. According to Synology sources, this board seems to support USB device (gadget?) mode. Though I didn't play around with it. PCIe Support ------------ This is fine, but trying to gate the clocks of unused lanes will hang PCI enum. In addition to that, pci_mvebu seems not to support DM_PCI. DDR3 Training ------------- Marvell/Synology uses eight PUPs instead of four. Does not look like this is meant to be customized in mainline U-Boot at all. OTOH I have no idea what a "PUP" actually is. PEX Init -------- Synology uses different values than mainline U-Boot with this patch: pex_max_unit_get returns 2, pex_max_if_get returns 7 and max_serdes_lines is set to 7. Not changing this seems to not have an impact, although I'm not entirely sure it does not cause issues I am not aware of. Static Environment ------------------ This allows to boot stock Synology firmware at least. In order to be a little more flexible when it comes to booting custom kernels, do not only load zImage partition, but also rd.gz into memory. This way it is possible to use about 7MB for kernel with piggyback initramfs. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Stefan Roese <sr@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-12-25 13:41:25 +00:00
armada-xp-maxbcm.dtb \
arm: mvebu: Add support for the Armada XP theadorable board This patch adds support for the Armada XP (MV78260) based theadorable board. Its equipped with onboard DDR3, UART, ethernet, I2C, SPI NOR, LCD and SATA (SSD) interfaces / devices. Two defconfigs are added: theadorable_defconfig: The production U-Boot version with a stripped down drivers and feature list. This removes networking, USB and PCI support. theadorable_debug_defconfig: The debugging / testing U-Boot version with full support for all drivers. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Signed-off-by: Stefan Roese <sr@denx.de>
2016-01-20 07:13:29 +00:00
armada-xp-synology-ds414.dtb \
arm: mvebu: dts: Build only arch-compatible dts files 64-bit Armada DTS files are not build correctly during compilation of 32-bit Armada boards and vice versa. So fix makefile build system to compile only those dts files which are compatible for the current build (64-bit Armada DTS files only for 64-bit builds and 32-bit Armada DTS files only for 32-bit builds). Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-08-05 11:37:25 +00:00
armada-xp-theadorable.dtb
arm: mvebu: dts: Makefile: Compile Armada 375 dtb in a separate step This patch changes the compilation, so that the Armada 375 board(s) are compiled in a separate step. This is necessary for the timer dts conversion, as A375 has a different / timer description in the dts. Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Tony Dinh <mibodhi@gmail.com>
2022-09-15 14:20:40 +00:00
endif
arm: mvebu: dts: Build only arch-compatible dts files 64-bit Armada DTS files are not build correctly during compilation of 32-bit Armada boards and vice versa. So fix makefile build system to compile only those dts files which are compatible for the current build (64-bit Armada DTS files only for 64-bit builds and 32-bit Armada DTS files only for 32-bit builds). Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-08-05 11:37:25 +00:00
else
dtb-$(CONFIG_ARCH_MVEBU) += \
armada-3720-db.dtb \
armada-3720-espressobin.dtb \
armada-3720-turris-mox.dtb \
armada-3720-eDPU.dtb \
armada-3720-uDPU.dtb \
armada-7040-db-nand.dtb \
armada-7040-db.dtb \
armada-8040-clearfog-gt-8k.dtb \
armada-8040-db.dtb \
armada-8040-mcbin.dtb \
armada-8040-puzzle-m801.dtb \
arm: octeontx2: Add dtsi/dts files for Octeon TX2 CN913x DB This patch adds the dtsi/dts files needed to support the Marvell Octeon TX2 CN913x DB. This is only the base port with not all interfaces supported fully. Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-05-11 06:11:24 +00:00
cn9130-db-A.dtb \
cn9130-db-B.dtb \
cn9131-db-A.dtb \
cn9131-db-B.dtb \
cn9132-db-A.dtb \
cn9132-db-B.dtb \
arm: octeontx2: Add dtsi/dts files for Octeon TX2 CN9130 CRB This patch adds the dtsi/dts files needed to support the Marvell Octeon TX2 CN9130 CRB. This is only the base port with not all interfaces supported fully. Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-03-16 16:20:52 +00:00
cn9130-crb-A.dtb \
arm: mvebu: Add RD-AC5X board The RD-AC5X-32G16HVG6HLG-A0 development board main components and features include: * Main 12V/54V power supply * 270 Gbps throughput packet processor on the main board * DDR4: * SR1: 2GB DDR4 2400MT/S(1GB x 2 pcs ) with ECC(1GB x 1 pcs) * SR2: 4GB DDR4 2400MT/S(2GB x 2 pcs ) with ECC(2GB x 1 pcs) * PCB co-layout with 4GB device to support 8GB (Dual CS) requirement * 16GB eMMC (Samsung KLMAG1JETD-B041006) * 16MB SPI NOR(GD25Q127C) * 32 x 1000 Base-T interfaces * 16 x 2500 Base-T interfaces * SR1: 88E2540*4 * SR2: 88E2580*1+88E2540*2 * Six (6) x 25G Base-R SFP28 interfaces * One (1) x RJ-45 console connector, interfacing to the on board UART * One (1) x USB Type-A connector, interfacing to the USB 2.0 port (0) * One (1) x USB Type-mini B connector, interfacing to the USB 2.0 port (1) * One (1) x RJ-45 1G Base-T Management port, interfacing to the host port (shared with PCIe) Connected to 88E1512 Gigabit Ethernet Phy * One (1) x Oculink port, interfacing to the PCIe port for external CPU connection * POE 802.3AT support on Port 1 ~ Port 32, 802.3BT support on Port 33 ~ Port 48 (Microsemi PD69208T4, PD69208M or TI TPS2388,TPS23881 solution) * POE total power budget 780W * LED interfaces per network port/POE * LED interfaces (common) showing system status * PTP TC mode Supported (Reserved M.2 connector to support BC mode) Signed-off-by: Chris Packham <judge.packham@gmail.com>
2022-11-05 04:24:00 +00:00
cn9130-crb-B.dtb \
ac5-98dx35xx-rd.dtb
arm: mvebu: dts: Build only arch-compatible dts files 64-bit Armada DTS files are not build correctly during compilation of 32-bit Armada boards and vice versa. So fix makefile build system to compile only those dts files which are compatible for the current build (64-bit Armada DTS files only for 64-bit builds and 32-bit Armada DTS files only for 32-bit builds). Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-08-05 11:37:25 +00:00
endif
arm: mvebu: Add basic Armada XP / 38x dtsi/dts files These will be needed by the upcoming DM (driver model) support for the Armada XP / 38x SoC's. This will provide DT based probing. The dts files are copied 1:1 from the Linux kernel release v4.2. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
2015-08-31 05:33:57 +00:00
ARM: dts: synquacer: Add device trees for DeveloperBox Add device trees for 96boards EE DeveloperBox and basement SynQuacer SoC dtsi. These files are imported from EDK2 commit 83d38b0b4c0f240d4488c600bbe87cea391f3922 as-is (except for the changes #include path and some macros). And add U-Boot specific changes in synquacer-sc2a11-developerbox-u-boot.dtsi Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
2021-06-04 09:44:59 +00:00
dtb-$(CONFIG_ARCH_SYNQUACER) += synquacer-sc2a11-developerbox.dtb
ARM: dts: uniphier: compile only DT files that make sense All the UniPhier DT files are compiled if CONFIG_ARCH_UNIPHIER is enabled, but not all of them actually work. For example, when U-Boot is compiled for ARM 32 bit, 64 bit DT files are also built, and vice versa. Compile only the combination that makes sense. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-21 09:05:28 +00:00
dtb-$(CONFIG_ARCH_UNIPHIER_LD11) += \
arm64: dts: uniphier: add support for LD11 Global board Add initial device tree support for LD11 Global board. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-06-22 09:43:51 +00:00
uniphier-ld11-global.dtb \
ARM: dts: uniphier: compile only DT files that make sense All the UniPhier DT files are compiled if CONFIG_ARCH_UNIPHIER is enabled, but not all of them actually work. For example, when U-Boot is compiled for ARM 32 bit, 64 bit DT files are also built, and vice versa. Compile only the combination that makes sense. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-21 09:05:28 +00:00
uniphier-ld11-ref.dtb
dtb-$(CONFIG_ARCH_UNIPHIER_LD20) += \
ARM: dts: uniphier: Add support for Akebi96 Add the device tree for Akebi96. Akebi96 is a 96boards certified development board based on UniPhier LD20. ( https://www.96boards.org/product/akebi96/ ) Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
2021-07-06 10:01:11 +00:00
uniphier-ld20-akebi96.dtb \
arm64: dts: uniphier: add support for LD20 Global board Add initial device tree support for LD20 Global board. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-06-22 09:43:52 +00:00
uniphier-ld20-global.dtb \
ARM: dts: uniphier: compile only DT files that make sense All the UniPhier DT files are compiled if CONFIG_ARCH_UNIPHIER is enabled, but not all of them actually work. For example, when U-Boot is compiled for ARM 32 bit, 64 bit DT files are also built, and vice versa. Compile only the combination that makes sense. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-21 09:05:28 +00:00
uniphier-ld20-ref.dtb
dtb-$(CONFIG_ARCH_UNIPHIER_LD4) += \
uniphier-ld4-ref.dtb
dtb-$(CONFIG_ARCH_UNIPHIER_LD6B) += \
uniphier-ld6b-ref.dtb
dtb-$(CONFIG_ARCH_UNIPHIER_PRO4) += \
ARM: dts: uniphier: sync DT with latest Linux Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-10-07 07:43:00 +00:00
uniphier-pro4-ace.dtb \
uniphier-pro4-ref.dtb \
ARM: dts: uniphier: compile only DT files that make sense All the UniPhier DT files are compiled if CONFIG_ARCH_UNIPHIER is enabled, but not all of them actually work. For example, when U-Boot is compiled for ARM 32 bit, 64 bit DT files are also built, and vice versa. Compile only the combination that makes sense. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-21 09:05:28 +00:00
uniphier-pro4-sanji.dtb
dtb-$(CONFIG_ARCH_UNIPHIER_PRO5) += \
uniphier-pro5-4kbox.dtb
dtb-$(CONFIG_ARCH_UNIPHIER_PXS2) += \
ARM: dts: uniphier: sync DT with latest Linux Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-10-07 07:43:00 +00:00
uniphier-pxs2-gentil.dtb \
ARM: dts: uniphier: compile only DT files that make sense All the UniPhier DT files are compiled if CONFIG_ARCH_UNIPHIER is enabled, but not all of them actually work. For example, when U-Boot is compiled for ARM 32 bit, 64 bit DT files are also built, and vice versa. Compile only the combination that makes sense. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-21 09:05:28 +00:00
uniphier-pxs2-vodka.dtb
ARM: dts: uniphier: add PXs3 SoC/board support Initial commit for the PXs3 SoC DT. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-21 09:05:30 +00:00
dtb-$(CONFIG_ARCH_UNIPHIER_PXS3) += \
uniphier-pxs3-ref.dtb
ARM: dts: uniphier: compile only DT files that make sense All the UniPhier DT files are compiled if CONFIG_ARCH_UNIPHIER is enabled, but not all of them actually work. For example, when U-Boot is compiled for ARM 32 bit, 64 bit DT files are also built, and vice versa. Compile only the combination that makes sense. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-21 09:05:28 +00:00
dtb-$(CONFIG_ARCH_UNIPHIER_SLD8) += \
ARM: dts: uniphier: sync DT with latest Linux Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-10-07 07:43:00 +00:00
uniphier-sld8-ref.dtb
ARM: dts: uniphier: compile only DT files that make sense All the UniPhier DT files are compiled if CONFIG_ARCH_UNIPHIER is enabled, but not all of them actually work. For example, when U-Boot is compiled for ARM 32 bit, 64 bit DT files are also built, and vice versa. Compile only the combination that makes sense. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-21 09:05:28 +00:00
arm: zynq: Sort dts names Sort names. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-11-02 10:46:43 +00:00
dtb-$(CONFIG_ARCH_ZYNQ) += \
ARM: fix arch/arm/dts/Makefile Since commit 27cb7300ffda ("Ensure device tree DTS is compiled"), build succeeds irrespective of the correctness of Makefile. In fact, you can compile any defconfig without adding any entry in arch/*/dts/Makefile. As a result, a lot of wrong code have been merged unnoticed. I am going to revert that commit, and lots of hidden issues have come to light: [1] Typos armada-3720-uDPU.dts, sun8i-a83t-tbs-a711.dts use the extension ".dts" instead of ".dtb" [2] DTB is associated to undefined CONFIG option For example, mx6sllevk_defconfig defines CONFIG_MX6SLL, but associates its device tree to CONFIG_MX6SL, which is undefined. [3] Lots of entries are missing Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Chris Packham <judge.packham@gmail.com> [trini: add imx6ul pico dtbs] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-03-14 05:58:33 +00:00
bitmain-antminer-s9.dtb \
arm: zynq: Add board support for cc108 cc108 board is wiring uart via PL which is good platform for SPL fpga support. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-11-02 08:18:42 +00:00
zynq-cc108.dtb \
arm: zynq: Add Nand flash mini u-boot configuration for zynq Add configuration files/dtses for mini u-boot configuration which runs on smaller footprint of memory. This configuration has only required nand flash support. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-07-16 10:27:01 +00:00
zynq-cse-nand.dtb \
arm: zynq: Add parallel NOR flash mini u-boot configuration for zynq Add configuration files/dtses for mini u-boot configuration which runs on smaller footprint OCM memory. This configuration only has required parallel nor flash support. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-07-16 10:27:02 +00:00
zynq-cse-nor.dtb \
arm: zynq: Add mini u-boot configuration for zynq Add configuration files/dtses for mini u-boot configurations which runs out of OCM. ram top is calculated from 0 that's why +#define CONFIG_SYS_SDRAM_BASE 0xfffc0000 +#define CONFIG_SYS_SDRAM_SIZE 0x40000 was hardcoded. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-11-02 09:54:48 +00:00
zynq-cse-qspi-single.dtb \
arm: zynq: Add support for DLC20 board Xilinx DLC20 has I2C0 with EEPROM(1KB), UART1, GPIO, SD0 (EMMC 4GB), USB0 device, ENET0, QSPI (16MB) and DDR(two of 256MB each). Boards have mix of Winbond/ST QSPIs. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-09-13 06:44:02 +00:00
zynq-dlc20-rev1.0.dtb \
dts: generate multiple device tree blobs It is convenient to have all device trees on the same SoC compiled. It allows for later easy repackaging without the need to re-run the make file. - Build device trees with the same SoC under arch/$(ARCH)/dts - Copy the one specified by CONFIG_DEFAULT_DEVICE_TREE or DEVICE_TREE=... to dts/dt.dtb Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-05 02:28:27 +00:00
zynq-microzed.dtb \
arm: zynq: Add initial support for Avnet MiniZed Initial support for Avnet MiniZed board. Tested UART1 (serial console), QSPI(Flash), SDHCI1 (eMMC), USB. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-22 16:03:04 +00:00
zynq-minized.dtb \
zynq: Add Zynq PicoZed board support The PicoZed is a System-on-Module board which is marketed as part of the ZedBoard/MicroZed/etc. collection. It includes a Zynq-7000 processor. This patch adds support that covers all the variants of the PicoZed including the SKUs with Z7010/Z7020 and Z7015/Z7030 Zynq chips. This patch set however only covers support for the System-on-Module and does not cover any extra components that are available on carrier boards (except those that are fanned out of the module itself). More information on this board, its variants and available carrier boards is available at: http://zedboard.org/product/picozed Signed-off-by: Nathan Rossi <nathan.rossi@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-04-14 04:58:10 +00:00
zynq-picozed.dtb \
arm: zynq: Sort dts names Sort names. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-11-02 10:46:43 +00:00
zynq-syzygy-hub.dtb \
ARM: zynq: Add support for the topic-miami system-on-modules and carrier boards The topic-miami SoMs contain a Zynq xc7z015 or xc7z030 SoC, 1GB DDR3L RAM, 32MB QSPI NOR flash and 256MB NAND flash. The topic-miamiplus SoMs contain a Zynq xc7z035, xc7z045 or xc7z100 SoC, 2x 1GB DDR3L RAM, 64MB dual-parallel QSPI flash, clock sources and a fan controller. The "Florida" carrier boards add SD, USB, ethernet and other interfaces. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-09-30 06:13:13 +00:00
zynq-topic-miami.dtb \
arm: zynq: Add support for the topic-miamilite system-on-module The topic-miamilite SoM contains a Zynq xc7z010 SoC, 1GB DDR3L RAM, 64MB dual-parallel QSPI NOR flash and clock sources. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-07 05:42:38 +00:00
zynq-topic-miamilite.dtb \
ARM: zynq: Add support for the topic-miami system-on-modules and carrier boards The topic-miami SoMs contain a Zynq xc7z015 or xc7z030 SoC, 1GB DDR3L RAM, 32MB QSPI NOR flash and 256MB NAND flash. The topic-miamiplus SoMs contain a Zynq xc7z035, xc7z045 or xc7z100 SoC, 2x 1GB DDR3L RAM, 64MB dual-parallel QSPI flash, clock sources and a fan controller. The "Florida" carrier boards add SD, USB, ethernet and other interfaces. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-09-30 06:13:13 +00:00
zynq-topic-miamiplus.dtb \
arm: zynq: Sort dts names Sort names. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-11-02 10:46:43 +00:00
zynq-zc702.dtb \
zynq-zc706.dtb \
dts: generate multiple device tree blobs It is convenient to have all device trees on the same SoC compiled. It allows for later easy repackaging without the need to re-run the make file. - Build device trees with the same SoC under arch/$(ARCH)/dts - Copy the one specified by CONFIG_DEFAULT_DEVICE_TREE or DEVICE_TREE=... to dts/dt.dtb Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-05 02:28:27 +00:00
zynq-zc770-xm010.dtb \
ARM: zynq: Add support for zc770-xm011 Add xm011 DTS file and related configs and configurations. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-22 09:39:04 +00:00
zynq-zc770-xm011.dtb \
ARM: fix arch/arm/dts/Makefile Since commit 27cb7300ffda ("Ensure device tree DTS is compiled"), build succeeds irrespective of the correctness of Makefile. In fact, you can compile any defconfig without adding any entry in arch/*/dts/Makefile. As a result, a lot of wrong code have been merged unnoticed. I am going to revert that commit, and lots of hidden issues have come to light: [1] Typos armada-3720-uDPU.dts, sun8i-a83t-tbs-a711.dts use the extension ".dts" instead of ".dtb" [2] DTB is associated to undefined CONFIG option For example, mx6sllevk_defconfig defines CONFIG_MX6SLL, but associates its device tree to CONFIG_MX6SL, which is undefined. [3] Lots of entries are missing Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Chris Packham <judge.packham@gmail.com> [trini: add imx6ul pico dtbs] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-03-14 05:58:33 +00:00
zynq-zc770-xm011-x16.dtb \
dts: generate multiple device tree blobs It is convenient to have all device trees on the same SoC compiled. It allows for later easy repackaging without the need to re-run the make file. - Build device trees with the same SoC under arch/$(ARCH)/dts - Copy the one specified by CONFIG_DEFAULT_DEVICE_TREE or DEVICE_TREE=... to dts/dt.dtb Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-05 02:28:27 +00:00
zynq-zc770-xm012.dtb \
arm: zynq: Add support for SYZYGY Hub board Add the Zynq-based SYZYGY Hub board from Opal Kelly. The board contains a Xilinx Zynq xc7z012s SoC, 1GB DDR3 RAM, and supports booting from SD. Signed-off-by: Tom McLeod <tom.mcleod@opalkelly.com> Cc: Michal Simek <monstr@monstr.eu> CC: Albert Aribaud <albert.u.boot@aribaud.net> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-09-28 00:53:26 +00:00
zynq-zc770-xm013.dtb \
arm: zynq: Sort dts names Sort names. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-11-02 10:46:43 +00:00
zynq-zed.dtb \
ARM: dts: zynq: Rename dts for Z-turn board Makes naming in line with other Zynq boards. Signed-off-by: Anton Gerasimov <tossel@gmail.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-24 17:32:00 +00:00
zynq-zturn.dtb \
ARM: zynq: Add Z-turn board V5 Adding Z-turn board V5 to resolve the change between: "Z-TURNBOARD_schematic.pdf" schematics state version 1 to 4 has Atheros AR8035 "Z-Turn_Board_sch_V15_20160303.pdf" schematics state version 5 has Micrel KSZ9031 At this time the S25FL128SAGNFI003 doesn't work because of bug: *** Warning - spi_flash_probe_bus_cs() failed, using default environment zynq-zturn was checked on V5 board, same error. Maybe Z-turn board have the same problem (board with W25Q128BVFIG). Signed-off-by: Alexandre GRIVEAUX <agriveaux@deutnet.info> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-10-01 08:33:36 +00:00
zynq-zturn-v5.dtb \
arm: zynq: add support for the zybo z7 board The board is manufactured by Digilent Main features: - Soc: XC7Z010 (Z7-10) or XC7Z020 (Z7-20) - RAM: 1 GB DDR3L - FLASH: 16 MB QSPI - 1 Gbps Ethernet - USB 2.0 - microSD slot - Pcam camera connector - HDMI Tx and Rx - Audio codec: stereo out, stereo in, mic - 5 (Z7-10) or 6 (Z7-20) Pmod ports - 6 push-buttons, 4 switches, 5 LEDs - 1 (Z7-10) or 2 (Z7-20) RGB LEDs Signed-off-by: Luis Araneda <luaraneda@gmail.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-07-24 15:31:19 +00:00
zynq-zybo.dtb \
zynq-zybo-z7.dtb
ARM: zynqmp: Add DTS for ep108 board Add DTS for ep108 board. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Series-to: u-boot
2015-10-30 14:39:18 +00:00
dtb-$(CONFIG_ARCH_ZYNQMP) += \
arm64: zynqmp: Add support for Avnet Ultra96 Avnet Ultra96 is rebranded Xilinx zcu100 revC/D. Add new defconfig files and point to origin internal board name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-07-24 14:27:00 +00:00
avnet-ultra96-rev1.dtb \
arm64: zynqmp: Add generic a2197 system controller config Add generic configuration for a2197-p/-m/-g boards. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-11 08:35:37 +00:00
zynqmp-a2197-revA.dtb \
arm64: zynqmp: Add support for DLC21 (Smartlynq+) board DLC21 is used as fast jtag cable. The patch adds support for this board from PS perspective. The most interesting part on the board is seps525 oled display. Also i2c, gpio, ethernet, uart, SD and eMMC are tested. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/3d35cd6a11cffc7456e21a88b214cc965734e852.1634231268.git.michal.simek@xilinx.com
2021-10-14 17:07:52 +00:00
zynqmp-dlc21-revA.dtb \
arm64: zynqmp: Add support for e-a2197-00 System Controller Add support for System Controller available on e-a2197-00 base board. System is very similar to p-a2197-00 board. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-15 10:37:20 +00:00
zynqmp-e-a2197-00-revA.dtb \
arm64: zynqmp: Sync names for SC with Versal ZynqMP based System controller is present on Versal boards. This patch is aligning names with Versal to follow the spec. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-06-28 11:16:10 +00:00
zynqmp-g-a2197-00-revA.dtb \
zynqmp-m-a2197-01-revA.dtb \
arm64: zynqmp: Add support for m-a2197-02 It is based on m-a2197-01 with some changes in i2c intrastructure. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-06-28 11:18:50 +00:00
zynqmp-m-a2197-02-revA.dtb \
arm64: zynqmp: Add support for m-a2197-03 It is based on m-a2197-01 with some changes in i2c intrastructure. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-06-28 11:53:45 +00:00
zynqmp-m-a2197-03-revA.dtb \
arm64: zynqmp: Sync names for SC with Versal ZynqMP based System controller is present on Versal boards. This patch is aligning names with Versal to follow the spec. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-06-28 11:16:10 +00:00
zynqmp-p-a2197-00-revA.dtb \
arm64: zynqmp: Add mini mtest configuration This configuration is useful when you want to run small u-boot and perform DDR memory test to make sure that DDR is properly configured. It is use for board bringup because alternative u-boot memory tests is quite good. Configuration is running out of OCM. As is done for others mini configurations 0x80 bytes for variables is enough and only default variables are stored there. Alternative memtest is enabled and also 2GB of DDR via DTS files. Configuration is enabling ZYNQMP_PSU_INIT_ENABLED and include psu_init() from zcu102 for testing purpose. In case of size issue this can be moved to SPL configuration as is done for mini_qspi configuration but it is not a problem now. Log: U-Boot 2018.11-00268-gbd58b8ba8915 (Nov 29 2018 - 15:33:35 +0100) Model: ZynqMP MINI Board: Xilinx ZynqMP DRAM: WARNING: Initializing TCM overwrites TCM content 2 GiB EL Level: EL3 In: dcc Out: dcc Err: dcc ZynqMP> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-11-29 09:37:49 +00:00
zynqmp-mini.dtb \
arm64: zynqmp: Split emmc configuration into emmc0 and emmc1 This patch splits the current mini emmc configuration into emmc0 and emmc1 configurations because emmc is probed at boot time and on systems which have only one interface mini configuration is failing on unused interface. This patch also adds required clock node in dts and enables CONFIG_MMC_SDHCI_ZYNQ through defconfig. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-06-05 09:48:32 +00:00
zynqmp-mini-emmc0.dtb \
zynqmp-mini-emmc1.dtb \
xilinx: zynqmp: Add new target with only nand enabled This patch adds new target which is called as mini configuration with only nand functionality and other required basic features enabled. This will be used to run in system with small footprint and needs nand support. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-05 10:46:15 +00:00
zynqmp-mini-nand.dtb \
arm64: zynqmp: Add QSPI flash mini u-boot configuration Add configuration files/dtses for mini u-boot configuration which runs on smaller footprint of internal memory. This configuration has only required qspi flash support and it uses DCC as serial. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-07-18 11:01:38 +00:00
zynqmp-mini-qspi.dtb \
arm64: zynqmp: Add support for Kria K24 SOM SOM itself from PS point of view is using the same configuration as K26 that's why reuse that files and only change compatible strings. The reason for creating own set of files is just in case when versions start to diverge because of HW change, supply chain issue, etc. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/61f877ec0b480c5bd368a1211fc73ff7465016bd.1674043915.git.michal.simek@amd.com
2023-01-18 12:11:59 +00:00
zynqmp-sm-k24-revA.dtb \
zynqmp-smk-k24-revA.dtb \
arm64: zynqmp: Add description for SOM/Kria boards The patch contains several DT files for SOM platform. Carrier card is sck-kv (KV260) revA/B. SMK-K26 is description for starter kit which doesn't have EMMC populated. And SM-K26 is full som with EMMC. Files are divided in this way to make sure that SOM can be plugged to different carrier card and all peripherals on SOM (or defined by a spec) can be used by U-Boot. Full DT for SOM+CC can be merged together as overlays. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-05-10 14:02:15 +00:00
zynqmp-sm-k26-revA.dtb \
zynqmp-smk-k26-revA.dtb \
arm64: zynqmp: Add support for kr260 revA/B boards Board is using kv260 design for couple of parts defined by spec like i2c eeproms, ina260, uart, etc. Board has 4 gems. One gem connected via PS SGMII(GT), another PS RGMII(MIO) and 2 via EMIO. First two shares the same MIO lines for PHYs. PL based one have separate EMIO lines via PL. Also two USB 3.0 with usb hubs are present. USB phys and USB hubs should have separate reset line. The first usb0 hub also has USB-SD controller (usb2244) connected to port 0. To test compatibility with k26 you can run: fdtoverlay -o /tmp/output.dtb -i arch/arm/dts/zynqmp-sm-k26-revA.dtb \ arch/arm/dts/zynqmp-sck-kr-g-revA.dtbo Also add support for kr260-revB board. Based on FRU it is revision B but schematics can be label as revA03. Changes in revB are: - SFP light - GEM2/3 TX_CLK fixes - PMOD/RPI connector fixes - Replace si5332 with oscilators Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/dac2ee1826e73b89c8cc1e430354eb43d291f675.1652870941.git.michal.simek@amd.com
2022-05-18 10:49:26 +00:00
zynqmp-sck-kr-g-revA.dtbo \
zynqmp-sck-kr-g-revB.dtbo \
arm64: zynqmp: Add description for SOM/Kria boards The patch contains several DT files for SOM platform. Carrier card is sck-kv (KV260) revA/B. SMK-K26 is description for starter kit which doesn't have EMMC populated. And SM-K26 is full som with EMMC. Files are divided in this way to make sure that SOM can be plugged to different carrier card and all peripherals on SOM (or defined by a spec) can be used by U-Boot. Full DT for SOM+CC can be merged together as overlays. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-05-10 14:02:15 +00:00
zynqmp-sck-kv-g-revA.dtbo \
zynqmp-sck-kv-g-revB.dtbo \
topic: zynqmp: Add support for zynqmp-xilinx-xdp platform XDP - Xilinx Drone Platform is a board for drones or other UAV. Pinmux the SD card by default, and if the SD card detect line is high (inactive) then pinmux the SD1 interface to EMIO instead. SD is placed on extension card and shares connection with on board wife. That means that when SD card is present in the board wifi can't be used. There seems to be an issue with DDR access from PL at 2400MT/s, after updating the PMU and ATF firmware this is causing extremely slow DDR access. Reducing the DDR speed from 2400 to 2133 appears to solve that issue, even though the hardware has proven to be 2400 capable. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-06-06 07:47:41 +00:00
zynqmp-topic-miamimp-xilinx-xdp-v1r1.dtb \
arm64: zynqmp: Add support for zcu100 aka Ultra96 board Add support for Xilinx zcu100. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-28 12:37:47 +00:00
zynqmp-zcu100-revC.dtb \
arm64: zynqmp: Move dts zcu102 to zcu102-revA Not using board revision is causing confusion about which board is supported and tested. Mark dts files exactly with board revision which was tested. When new board revision arives it can be symlink if SW view is the same. Also add -revX suffix to compatible string because user space tools are parsing this string and can change behavior depends of board revision. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-20 10:38:27 +00:00
zynqmp-zcu102-revA.dtb \
ARM64: zynqmp: Add support for zc1751 with DC cards Support ZynqMP zc1751 with DC cards. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-07 14:00:11 +00:00
zynqmp-zcu102-revB.dtb \
arm64: zynqmp: Add support for zcu102 1.0 rev 1.0 rev is the latest rev. Describe information in eeprom. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-11-02 10:42:12 +00:00
zynqmp-zcu102-rev1.0.dtb \
arm64: zynqmp Add support for zcu102 rev1.1 rev1.1 has different DDR sodimm module that's why it requires different DDR configuration. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-03-12 08:03:13 +00:00
zynqmp-zcu102-rev1.1.dtb \
arm64: zynqmp: Add support for zcu104 customer board Xilinx zcu104 is another customer board. It is sort of zcu102 clone with some differences. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-28 13:36:36 +00:00
zynqmp-zcu104-revA.dtb \
zynqmp-zcu104-revC.dtb \
arm64: zynqmp: Add support for Xilinx zcu106-revA Xilinx zcu106 is a customer board. It is reusing some parts from zcu102. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-28 13:43:51 +00:00
zynqmp-zcu106-revA.dtb \
arm64: zynqmp: add support for zcu106 rev1.0 This patch adds psu_init for Xilinx ZCU106 rev1.0. Xilinx ZCU106 rev1.0 has newer x16 DDR4 memories and it is SW compatible with revA. Signed-off-by: Neal Frager <neal.frager@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/997b3e23457e4d24ce0e197d742382aaec36c2b2.1646230318.git.michal.simek@xilinx.com
2022-03-02 14:12:02 +00:00
zynqmp-zcu106-rev1.0.dtb \
arm64: zynqmp: Add support for Xilinx zcu111-revA Xilinx zcu111 is a customer board. It is reusing some parts from zcu102. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-28 13:55:27 +00:00
zynqmp-zcu111-revA.dtb \
arm64: zynqmp: Rename zc1275 to zcu1275 Name of this platform has changed and released to customers that's why name has also changed. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Series-to: uboot
2019-05-21 10:07:23 +00:00
zynqmp-zcu1275-revA.dtb \
zynqmp-zcu1275-revB.dtb \
arm64: zynqmp: Add support for zcu1285 revA board zcu1285 is the same as zcu1275 but it is using Avnet FMC http://www.ultrazed.org/product/network-fmc-module Unfortunately not everything is connected now that's why this is only describing system which Xilinx is using. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-09 09:28:56 +00:00
zynqmp-zcu1285-revA.dtb \
arm64: zynqmp: Add support for zcu208 The board is very similar to zcu216 with zu49dr device. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-11-25 07:38:25 +00:00
zynqmp-zcu208-revA.dtb \
arm64: zynqmp: Add support for zcu216 zcu104/6 defconfig was used as source. Standard features are enabled. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-08-06 10:07:10 +00:00
zynqmp-zcu216-revA.dtb \
arm64: zynqmp: Add support for zc12xx boards Add support for zc12xx boards. All of them are internal boards for silicon validation and share very similar base platforms. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-28 13:09:32 +00:00
zynqmp-zc1232-revA.dtb \
zynqmp-zc1254-revA.dtb \
ARM64: zynqmp: Add support for zc1751 with DC cards Support ZynqMP zc1751 with DC cards. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-07 14:00:11 +00:00
zynqmp-zc1751-xm015-dc1.dtb \
zynqmp-zc1751-xm016-dc2.dtb \
arm64: zynqmp: Add support for zc1751 dc3 zc1751 is based board with dc3 extenstion card which is used for silicon validation. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-28 13:00:25 +00:00
zynqmp-zc1751-xm017-dc3.dtb \
ARM64: zynqmp: Add support for zc1751-dc4 zc1751-dc4 contains four GEMs. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-05-26 06:06:38 +00:00
zynqmp-zc1751-xm018-dc4.dtb \
ARM64: zynqmp: Add support for zc1751 with DC cards Support ZynqMP zc1751 with DC cards. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-07 14:00:11 +00:00
zynqmp-zc1751-xm019-dc5.dtb
arm64: versal: Add mini eMMC configuration This patch adds mini eMMC configuration which has only emmc0 and emmc1 functionalities and can run from small amount of memory. This is required for memory constraint devices. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-08 16:17:29 +00:00
dtb-$(CONFIG_ARCH_VERSAL) += \
arm64: versal: Add mini configuration for Versal This patch adds new mini target for versal. This configuration is very minimal in size which runs from OCM. It contains support for mtest which can be used for running DDR memory tests. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-02-04 10:48:29 +00:00
versal-mini.dtb \
arm64: versal: Add mini eMMC configuration This patch adds mini eMMC configuration which has only emmc0 and emmc1 functionalities and can run from small amount of memory. This is required for memory constraint devices. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-08 16:17:29 +00:00
versal-mini-emmc0.dtb \
arm: xilinx_versal_virt: Add a devicetree file Add an empty file to prevent build errors when building with CONFIG_OF_SEPARATE enabled. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-17 03:59:17 +00:00
versal-mini-emmc1.dtb \
arm64: versal: Add octal spi flash mini u-boot configuration Add configuration file for mini u-boot configuration which runs on a smaller footprint from on chip memory(OCM). This configuration has required CONFIG's enabled to support octal spi flash and uses DCC terminal for console output. Add required dts for octal spi flash mini u-boot configuration. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com> Link: https://lore.kernel.org/r/20221116141155.14788-4-ashok.reddy.soma@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-11-16 14:11:55 +00:00
versal-mini-ospi-single.dtb \
arm64: versal: Add qspi flash mini u-boot configuration Add configuration file for mini u-boot configuration which runs on a smaller footprint from on chip memory(OCM). This configuration has required CONFIG's enabled to support qspi flash and uses DCC terminal for console output. Add required dts files for qspi mini configuration. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com> Link: https://lore.kernel.org/r/20221116141155.14788-2-ashok.reddy.soma@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-11-16 14:11:53 +00:00
versal-mini-qspi-single.dtb \
arm: xilinx_versal_virt: Add a devicetree file Add an empty file to prevent build errors when building with CONFIG_OF_SEPARATE enabled. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-17 03:59:17 +00:00
xilinx-versal-virt.dtb
arm64: versal-net: Add support for Versal NET platform Versal NET platform is based on Versal chip which is reusing a lot of IPs. For more information about new IPs please take a look at DT which describe currently supported devices. The patch is adding architecture and board support with soc detection algorithm. Generic setting should be very similar to Versal but it will likely diverge in longer run. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/320206853dc370ce290a4e7b6d0bb26b05206021.1663589964.git.michal.simek@amd.com
2022-09-19 12:21:02 +00:00
dtb-$(CONFIG_ARCH_VERSAL_NET) += \
arm64: versal-net: Add support for mini configuration Versal NET mini configuration is designed for running memory test. Current output is on DCC but changing serial0 alias to pl011 will move console to serial port. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aec3f41a4cc48c45b8f07dd6e423d5838dbcc9d7.1663589964.git.michal.simek@amd.com
2022-09-19 12:21:10 +00:00
versal-net-mini.dtb \
arm64: versal-net: Add support for Versal NET platform Versal NET platform is based on Versal chip which is reusing a lot of IPs. For more information about new IPs please take a look at DT which describe currently supported devices. The patch is adding architecture and board support with soc detection algorithm. Generic setting should be very similar to Versal but it will likely diverge in longer run. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/320206853dc370ce290a4e7b6d0bb26b05206021.1663589964.git.michal.simek@amd.com
2022-09-19 12:21:02 +00:00
xilinx-versal-net-virt.dtb
arm: zynqmp: Add ZynqMP minimal R5 support Xilinx ZynqMP also contains dual Cortex R5 which can run U-Boot. This patch is adding minimal support to get U-Boot boot. U-Boot on R5 runs out of DDR with default configuration that's why DDR needs to be partitioned if there is something else running on arm64. Console is done via Cadence uart driver and the first Cadence Triple Timer Counter is used for time. This configuration with uart1 was tested on zcu100-revC. U-Boot 2018.05-rc2-00021-gd058a08d907d (Apr 18 2018 - 14:11:27 +0200) Model: Xilinx ZynqMP R5 DRAM: 512 MiB WARNING: Caches not enabled MMC: In: serial@ff010000 Out: serial@ff010000 Err: serial@ff010000 Net: Net Initialization Skipped No ethernet found. ZynqMP r5> There are two ways how to run this on ZynqMP. 1. Run from ZynqMP arm64 tftpb 20000000 u-boot-r5.elf setenv autostart no && bootelf -p 20000000 cpu 4 disable && cpu 4 release 10000000 lockstep or cpu 4 disable && cpu 4 release 10000000 split 2. Load via jtag when directly to R5 Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-12 15:39:46 +00:00
dtb-$(CONFIG_ARCH_ZYNQMP_R5) += \
zynqmp-r5.dtb
ARM: fix arch/arm/dts/Makefile Since commit 27cb7300ffda ("Ensure device tree DTS is compiled"), build succeeds irrespective of the correctness of Makefile. In fact, you can compile any defconfig without adding any entry in arch/*/dts/Makefile. As a result, a lot of wrong code have been merged unnoticed. I am going to revert that commit, and lots of hidden issues have come to light: [1] Typos armada-3720-uDPU.dts, sun8i-a83t-tbs-a711.dts use the extension ".dts" instead of ".dtb" [2] DTB is associated to undefined CONFIG option For example, mx6sllevk_defconfig defines CONFIG_MX6SLL, but associates its device tree to CONFIG_MX6SL, which is undefined. [3] Lots of entries are missing Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Chris Packham <judge.packham@gmail.com> [trini: add imx6ul pico dtbs] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-03-14 05:58:33 +00:00
dtb-$(CONFIG_AM33XX) += \
am335x-baltos.dtb \
am335x-bone.dtb \
am335x-boneblack.dtb \
arm: dts: Resync dts for BeagleBone and derivatives Sync BeagleBone dts files & TPS dtsi files with Linux v5.17 and include the SanCloud BBE Extended WiFi dts added in v5.18-rc1. Also pull in changes to am33xx-l4.dtsi needed to support the BeagleBone Blue. The change to use the cpsw switch driver (commit c477358e66a3 in Linux) is excluded from the sync as u-boot does not recognise the new compatible string. Signed-off-by: Paul Barker <paul.barker@sancloud.com>
2022-04-11 15:41:59 +00:00
am335x-boneblack-wireless.dtb \
am335x-boneblue.dtb \
ARM: fix arch/arm/dts/Makefile Since commit 27cb7300ffda ("Ensure device tree DTS is compiled"), build succeeds irrespective of the correctness of Makefile. In fact, you can compile any defconfig without adding any entry in arch/*/dts/Makefile. As a result, a lot of wrong code have been merged unnoticed. I am going to revert that commit, and lots of hidden issues have come to light: [1] Typos armada-3720-uDPU.dts, sun8i-a83t-tbs-a711.dts use the extension ".dts" instead of ".dtb" [2] DTB is associated to undefined CONFIG option For example, mx6sllevk_defconfig defines CONFIG_MX6SLL, but associates its device tree to CONFIG_MX6SL, which is undefined. [3] Lots of entries are missing Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Chris Packham <judge.packham@gmail.com> [trini: add imx6ul pico dtbs] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-03-14 05:58:33 +00:00
am335x-brppt1-mmc.dtb \
am335x-brxre1.dtb \
board/BuR/brsmarc1: initial commit This commit adds support for the B&R brsmarc1 SoM. The SoM is based on TI's AM335x SoC. Mainly vxWorks 6.9.4.x is running on the board, doing some PLC stuff on various carrier boards. Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2019-08-01 05:04:46 +00:00
am335x-brsmarc1.dtb \
arm, am335x: siemens: enable DM/DTS support enable basic DM/DTS support for the siemens am335x based boards. Signed-off-by: Heiko Schocher <hs@denx.de>
2016-06-13 13:16:01 +00:00
am335x-draco.dtb \
am335x-evm.dtb \
ARM: dts: AM335x-BBG: Add initial support Add initial DTS support for AM335x-BBG Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-05-16 05:54:29 +00:00
am335x-evmsk.dtb \
ARM: dts: AM335x-ICEv2: Add minimal dts support Add minimal dts support for AM335x-ICEv2 board Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com>
2016-05-16 06:17:28 +00:00
am335x-bonegreen.dtb \
arm: dts: Resync dts for BeagleBone and derivatives Sync BeagleBone dts files & TPS dtsi files with Linux v5.17 and include the SanCloud BBE Extended WiFi dts added in v5.18-rc1. Also pull in changes to am33xx-l4.dtsi needed to support the BeagleBone Blue. The change to use the cpsw switch driver (commit c477358e66a3 in Linux) is excluded from the sync as u-boot does not recognise the new compatible string. Signed-off-by: Paul Barker <paul.barker@sancloud.com>
2022-04-11 15:41:59 +00:00
am335x-bonegreen-wireless.dtb \
arm, am335x: siemens: enable DM/DTS support enable basic DM/DTS support for the siemens am335x based boards. Signed-off-by: Heiko Schocher <hs@denx.de>
2016-06-13 13:16:01 +00:00
am335x-icev2.dtb \
ti: Add device-tree for am335x-pocketbeagle. Add device-tree files from linux 5.1-rc7 needed to complete support for PocketBeagle. Signed-off-by: Vagrant Cascadian <vagrant@debian.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-04-29 23:12:29 +00:00
am335x-pocketbeagle.dtb \
arm, am335x: siemens: enable DM/DTS support enable basic DM/DTS support for the siemens am335x based boards. Signed-off-by: Heiko Schocher <hs@denx.de>
2016-06-13 13:16:01 +00:00
am335x-pxm50.dtb \
arm: add support for PDU001 This patch adds support for the PDU001 board. Signed-off-by: Felix Brack <fb@ltec.ch> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-01-23 17:27:22 +00:00
am335x-rut.dtb \
arm: dts: Import am335x-sancloud-bbe devicetree This device tree is imported from Linux 5.13.1 and enabled via the am335x board file and the am335x evm defconfig. Signed-off-by: Paul Barker <paul.barker@sancloud.com>
2021-07-12 20:14:10 +00:00
am335x-sancloud-bbe.dtb \
arm: dts: Resync dts for BeagleBone and derivatives Sync BeagleBone dts files & TPS dtsi files with Linux v5.17 and include the SanCloud BBE Extended WiFi dts added in v5.18-rc1. Also pull in changes to am33xx-l4.dtsi needed to support the BeagleBone Blue. The change to use the cpsw switch driver (commit c477358e66a3 in Linux) is excluded from the sync as u-boot does not recognise the new compatible string. Signed-off-by: Paul Barker <paul.barker@sancloud.com>
2022-04-11 15:41:59 +00:00
am335x-sancloud-bbe-lite.dtb \
am335x-sancloud-bbe-extended-wifi.dtb \
arm: dts: add am335x-shc.dts for shc board add DTS from linux tree commit "47bfa6d9dc8c060bf56554a465c9031e286d2f80" change for U-Boot: switch to SPDX-license identifier. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-01-21 05:16:26 +00:00
am335x-shc.dtb \
ARM: dts: am335x-chili*: add chiliSOM and chiliboard DTS files Import chiliSOM and chiliboard dts files from Linux v4.19. They will be used after transition to driver model and device-tree based boot. Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-11-21 19:32:00 +00:00
am335x-pdu001.dtb \
am335x: sl50: Add Device Tree Support and DM_MMC driver This adds device tree and the DM_MMC driver for the SL50 board. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2018-12-27 16:34:11 +00:00
am335x-chiliboard.dtb \
am335x: igep003x: Add Device Tree Support and DM_MMC driver This adds device tree and the DM_MMC driver for the AM335x IGEP based boards. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2018-12-28 10:55:48 +00:00
am335x-sl50.dtb \
am335x, guardian: Add support for the bosch guardian board Add support for the Bosch Guardian board. CPU : AM335X-GP rev 2.1 Model: Bosch AM335x Guardian I2C: ready DRAM: 256 MiB NAND: 512 MiB MMC: OMAP SD/MMC: 0 Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Martyn Welch <martyn.welch@collabora.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Felix Brack <fb@ltec.ch>
2019-02-25 15:33:00 +00:00
am335x-base0033.dtb \
ARM: am335x: Add phyCORE AM335x R2 support Support for Phytech phyCORE AM335x R2 SOM (PCL060) on the Phytec phyBOARD-Wega AM335x. CPU : AM335X-GP rev 2.1 Model: Phytec AM335x phyBOARD-WEGA DRAM: 256 MiB NAND: 256 MiB MMC: OMAP SD/MMC: 0 eth0: ethernet@4a100000 Working: - Eth0 - i2C - MMC/SD - NAND - UART - USB (host) Device trees were taken from Linux mainline: commit 37624b58542f ("Linux 5.1-rc7") Signed-off-by: Niel Fourie <lusus@denx.de> Signed-off-by: Parthiban Nallathambi <pn@denx.de> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com> Tested-by: Marek Vasut <marex@denx.de>
2019-06-03 13:31:17 +00:00
am335x-guardian.dtb \
ARM: am335x: Add phyBOARD REGOR support phyBOARD-REGOR is based on phyCORE AM335x R2 SoM (PCL060). CPU : AM335X-GP rev 2.1 Model: Phytec AM335x phyBOARD-REGOR DRAM: 512 MiB NAND: 512 MiB MMC: OMAP SD/MMC: 0 eth0: ethernet@4a100000 Working: - Eth0 - i2C - MMC/SD - NAND - UART - USB (host) Device trees were taken from Linux mainline: commit c4d6fe731176 ("Linux 5.9.0") Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-10-23 14:23:49 +00:00
am335x-wega-rdk.dtb \
am335x-regor-rdk.dtb
ARM: dts: AM43x-EPOS Initial Support Add initial DTS support for AM43-EPOS evm. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-05-16 05:41:17 +00:00
dtb-$(CONFIG_AM43XX) += am437x-gp-evm.dtb am437x-sk-evm.dtb \
ARM: dts: AM437x-IDK Initial Support Add initial DTS support for AM437x-IDK evm. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-05-16 05:41:18 +00:00
am43x-epos-evm.dtb \
ARM: dts: Add new "generic" am4372 device tree file. With U-boot runtime board detect for DTB selection a "default" dtb needs to be created. This will be used temporarily until the "proper" dtb is selected. Also, add -u-boot.dtsi for AM437x SK and IDK to enable I2C for board detection via DM_I2C. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-03-26 07:57:02 +00:00
am437x-idk-evm.dtb \
arm: am437x: cm-t43: Add device tree, enable OF_CONTROL Add device tree from Linux for driver model conversion and enable OF_CONTROL. This will remove the following compile warning: ================================================== Device Tree Source is not correctly specified. Please define 'CONFIG_DEFAULT_DEVICE_TREE' or build with 'DEVICE_TREE=<device_tree>' argument =================================================== Target was compile tested, build was clean. Signed-off-by: Suniel Mahesh <sunil.m@techveda.org>
2019-08-30 20:04:59 +00:00
am4372-generic.dtb \
am437x-cm-t43.dtb
ARM: fix arch/arm/dts/Makefile Since commit 27cb7300ffda ("Ensure device tree DTS is compiled"), build succeeds irrespective of the correctness of Makefile. In fact, you can compile any defconfig without adding any entry in arch/*/dts/Makefile. As a result, a lot of wrong code have been merged unnoticed. I am going to revert that commit, and lots of hidden issues have come to light: [1] Typos armada-3720-uDPU.dts, sun8i-a83t-tbs-a711.dts use the extension ".dts" instead of ".dtb" [2] DTB is associated to undefined CONFIG option For example, mx6sllevk_defconfig defines CONFIG_MX6SLL, but associates its device tree to CONFIG_MX6SL, which is undefined. [3] Lots of entries are missing Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Chris Packham <judge.packham@gmail.com> [trini: add imx6ul pico dtbs] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-03-14 05:58:33 +00:00
dtb-$(CONFIG_TARGET_AM3517_EVM) += am3517-evm.dtb
thunerx_88xx: Clean up config slightly. We don't use CONFIG_SYS_64BIT anywhere and can use CONFIG_TARGET_THUNDERX_88XX to build the device trees. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-25 15:02:40 +00:00
dtb-$(CONFIG_TARGET_THUNDERX_88XX) += thunderx-88xx.dtb
dts: generate multiple device tree blobs It is convenient to have all device trees on the same SoC compiled. It allows for later easy repackaging without the need to re-run the make file. - Build device trees with the same SoC under arch/$(ARCH)/dts - Copy the one specified by CONFIG_DEFAULT_DEVICE_TREE or DEVICE_TREE=... to dts/dt.dtb Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-05 02:28:27 +00:00
ARM: socfpga: abolish CONFIG_SOCFPGA Replace CONFIG_SOCFPGA with CONFIG_ARCH_SOCFPGA. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-04-21 11:38:23 +00:00
dtb-$(CONFIG_ARCH_SOCFPGA) += \
arm: dts: agilex: Add base dtsi and devkit dts Add device tree files for Agilex SoC platform. socfpga_agilex-u-boot.dtsi and socfpga_agilex_socdk-u-boot.dts contains Uboot specific DT properties. socfpga_agilex.dtsi and socfpga_agilex_socdk.dts are from Linux (kernel/git/dinguyen/linux.git, commit 6f0bf971bacacc) Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-27 07:55:30 +00:00
socfpga_agilex_socdk.dtb \
ARM: socfpga: Add initial support for the ABB SECU board Add initial support for the ABB SECU board, which is an ArriaV-based SoCFPGA system with ethernet and booting from Denali NAND. Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-02-19 18:55:14 +00:00
socfpga_arria5_secu1.dtb \
dt: socfpga: Import and enable Arria V DK DTS Import DTS for Arria V development kit and enable support for DT. The DT is imported from Linux 3.19-rc1 as of commit 97bf6af1f928216fd6c5a66e8a57bfa95a659672 . Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@opensource.altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Acked-by: Pavel Machek <pavel@denx.de> Reviewed-by: Stefan Roese <sr@denx.de> Cc: Vince Bridgers <vbridger@opensource.altera.com>
2014-12-30 20:08:57 +00:00
socfpga_arria5_socdk.dtb \
arm: dts: chameleonv3: Add 270-2 variant Add devicetree for chameleonv3 with the 270-2I2-D11E variant of the Mercury+ AA1 module Signed-off-by: Paweł Anikiel <pan@semihalf.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-02-21 15:17:05 +00:00
socfpga_arria10_chameleonv3_270_2.dtb \
arm: dts: Add Chameleonv3 devicetrees Add devicetrees for Google Chameleon V3 board Signed-off-by: Paweł Anikiel <pan@semihalf.com> Signed-off-by: Alexandru M Stan <amstan@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-06-17 10:47:18 +00:00
socfpga_arria10_chameleonv3_270_3.dtb \
socfpga_arria10_chameleonv3_480_2.dtb \
ARM: socfpga: Sort the DT Makefile Sort the Makefile entries, no functional change. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dinh Nguyen <dinguyen@kernel.org>
2018-05-07 20:29:17 +00:00
socfpga_arria10_socdk_sdmmc.dtb \
arm: socfpga: Re-add support for Aries MCV SoM and MCVEV[KP] board Re-add support for Aries Embedded MCV SoM, which is CycloneV based and the associated MCVEVK and MCVEVP baseboard. The board can boot from eMMC. Ethernet and USB is supported. The Aries Embedded boards have been removed with commit 03b54997d568 ("board/aries: Remove"). I will now take care of them. The device-tree files are from mainline Linux commit e93c9c99a629 ("Linux v5.1)". Signed-off-by: Wolfgang Grandegger <wg@aries-embedded.de> CC: Marek Vasut <marex@denx.de> CC: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-05-12 17:25:18 +00:00
socfpga_cyclone5_mcvevk.dtb \
ARM: socfpga: add support for IS1 board This adds support for IS1 board. Pretty usual socfpga board, 256MB of RAM, does not have MMC, two SPI chips, one ethernet port, two additional ethernet ports connected to the FPGA. Signed-off-by: Pavel Machek <pavel@denx.de>
2016-06-07 10:37:23 +00:00
socfpga_cyclone5_is1.dtb \
dt: socfpga: Import and enable Cyclone V DK DTS Import DTS for Cyclone V development kit and enable support for DT. The DT is imported from Linux 3.19-rc1 as of commit 97bf6af1f928216fd6c5a66e8a57bfa95a659672 . Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@opensource.altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Acked-by: Pavel Machek <pavel@denx.de> Reviewed-by: Stefan Roese <sr@denx.de> Cc: Vince Bridgers <vbridger@opensource.altera.com>
2014-12-30 20:05:53 +00:00
socfpga_cyclone5_socdk.dtb \
ARM: socfpga: Add new CycloneV SoC Devboards DBM-SoC1 board Add support for a new boards from devboards.de , the DBM-SoC1 . This board has one ethernet port, one USB OTG port and USB UART. Signed-off-by: Marek Vasut <marex@denx.de>
2018-02-24 22:34:00 +00:00
socfpga_cyclone5_dbm_soc1.dtb \
ARM: socfpga: Sort the DT Makefile Sort the Makefile entries, no functional change. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dinh Nguyen <dinguyen@kernel.org>
2018-05-07 20:29:17 +00:00
socfpga_cyclone5_de0_nano_soc.dtb \
socfpga: add support for Terasic DE1-SoC board Add CycloneV based Terasic DE1-SoC board. The board boots from SD/MMC. Ethernet and USB host is supported. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Marek Vasut <marex@denx.de>
2016-11-14 15:07:10 +00:00
socfpga_cyclone5_de1_soc.dtb \
arm: socfpga: add cyclone5 based de10-nano board Add support for the Terasic DE10-Nano board. The board is based on the DE0-Nano-Soc board but adds a larger FPGA and an HDMI output. Signed-off-by: Dalon Westergreen <dwesterg@gmail.com> Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
2017-04-18 15:11:16 +00:00
socfpga_cyclone5_de10_nano.dtb \
arm: socfpga: Add support for Terasic SoCkit board Add support for Terasic SoCkit, which is CycloneV based board. The board can boot either from SD/MMC or QSPI. Ethernet is also supported. Signed-off-by: Marek Vasut <marex@denx.de>
2015-06-21 15:28:53 +00:00
socfpga_cyclone5_sockit.dtb \
arm: socfpga: Add SoCFPGA SR1500 board The SR1500 board is a CycloneV based board, similar to the EBV SoCrates, equipped with the following devices: - SPI NOR - eMMC - Ethernet Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Marek Vasut <marex@denx.de> Cc: Pavel Machek <pavel@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Acked-by: Pavel Machek <pavel@denx.de>
2015-11-18 10:06:09 +00:00
socfpga_cyclone5_socrates.dtb \
arm: socfpga: Add samtec VIN|ING board Add support for board based on the popular Altera Cyclone V SoC. This board has the following properties: - 1 GiB of DRAM - 1 Gigabit ethernet - 1 USB gadget port - 1 USB host port with an on-board hub - 2 QSPI NORs connected to the Cadence QSPI core - Multiple I2C EEPROMs and one I2C temperature sensor Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Chin Liang See <clsee@altera.com> --- V2: Update the defconfig as per Tom's request
2015-12-01 17:09:52 +00:00
socfpga_cyclone5_sr1500.dtb \
ARM: socfpga: Sort the DT Makefile Sort the Makefile entries, no functional change. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dinh Nguyen <dinguyen@kernel.org>
2018-05-07 20:29:17 +00:00
socfpga_cyclone5_vining_fpga.dtb \
arm: dts: Add base dtsi and devkit dts for Intel N5X device Add device tree for N5X. Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com> Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Reviewed-by: Ley Foon Tan <lftan.linux@gmail.com>
2021-08-10 03:26:40 +00:00
socfpga_n5x_socdk.dtb \
ARM: socfpga: Sort the DT Makefile Sort the Makefile entries, no functional change. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dinh Nguyen <dinguyen@kernel.org>
2018-05-07 20:29:17 +00:00
socfpga_stratix10_socdk.dtb
arm: socfpga: Add SoCFPGA SR1500 board The SR1500 board is a CycloneV based board, similar to the EBV SoCrates, equipped with the following devices: - SPI NOR - eMMC - Ethernet Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Marek Vasut <marex@denx.de> Cc: Pavel Machek <pavel@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Acked-by: Pavel Machek <pavel@denx.de>
2015-11-18 10:06:09 +00:00
ARM: dts: dra72: add rev C evm support Add DTS support for dra72 evm Rev C which has the following changes * Two ethernet ports now instead of the single one in rev B. * DP83867 ethernet phy instead of DP838865. Cc: Vignesh R <vigneshr@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-09-27 07:31:41 +00:00
dtb-$(CONFIG_TARGET_DRA7XX_EVM) += dra72-evm.dtb dra7-evm.dtb \
board: ti: dra76: Add dt support Add support for selecting proper dtb for dra76x u-boot from FIT. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-21 07:21:01 +00:00
dra72-evm-revc.dtb dra71-evm.dtb dra76-evm.dtb
ARM: dts: AM572x-IDK Initial Support Add initial DTS support for AM572-IDK evm. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Schuyler Patton <spatton@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-06-10 04:05:45 +00:00
dtb-$(CONFIG_TARGET_AM57XX_EVM) += am57xx-beagle-x15.dtb \
ARM: dts: am57xx: sync DT with latest Linux Sync all am57xx based dts files with latest Linux Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-11-25 05:44:18 +00:00
am57xx-beagle-x15-revb1.dtb \
board: ti: am57xx: Add dt support for BeagleBoard-X15 revC Add support for selecting proper dtb for am57xx BeagleBoard X15 revC u-boot from FIT Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-23 06:09:06 +00:00
am57xx-beagle-x15-revc.dtb \
board: ti: beagleboneai: add dts file BeagleBoard.org BeagleBone AI is an open source hardware single board computer based on the Texas Instruments AM5729 SoC featuring dual-core 1.5GHz Arm Cortex-A15 processor, dual-core C66 digital signal processor (DSP), quad-core embedded vision engine (EVE), Arm Cortex-M4 processors, dual programmable realtime unit industrial control subsystems and more. The board features 1GB DDR3L, USB3.0 Type-C, USB HS Type-A, microHDMI, 16GB eMMC flash, 1G Ethernet, 802.11ac 2/5GHz, Bluetooth, and BeagleBone expansion headers. For more information, refer to: https://beaglebone.ai The corresponding patch against the mainline linux kernel can be found at: https://patchwork.kernel.org/patch/11254903/ This patch introduces the BeagleBone AI device tree. Note that the device use the "ti,tpd12s016" component which is software compatible with "ti,tpd12s015". Thus we only use the latter driver. Signed-off-by: Jason Kridner <jdk@ti.com> Signed-off-by: Caleb Robey <c-robey@ti.com> Cc: Robert Nelson <robertcnelson@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-02 14:17:28 +00:00
am5729-beagleboneai.dtb \
ARM: dts: am574x-idk: Add initial support Add initial dts support for am574x-idk Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2017-12-29 06:17:57 +00:00
am574x-idk.dtb \
ARM: dts: AM571x-IDK Initial Support Add initial DTS support for AM571-IDK evm. Signed-off-by: Schuyler Patton <spatton@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-11-25 05:44:25 +00:00
am572x-idk.dtb \
am571x-idk.dtb
stv0991: fdt: add stv0991 device tree This patch adds device tree for the ST Micro stv0991 board & enables device tree control. Progressively device tree support for the drivers being used will also be added. Signed-off-by: Vikas Manocha <vikas.manocha@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-05-03 21:10:34 +00:00
dtb-$(CONFIG_TARGET_STV0991) += stv0991.dtb
arm: socfpga: Add DT support for SoCFPGA and add socfpga_socrates target This patch includes the latest DT sources for socfpga from the current Linux kernel. And enables CONFIG_OF_CONTROL for the new build target "socfpga_socrates" (the EBV SoCrates board) to make use of this new DT support. Until this patch, the only SoCFPGA U-Boot target in mainline is "socfpga_cyclone5". This build target is not (yet) changed to support DT. So nothing changes for this target. Even though the long-term goal should be to move all SoCFPGA targets over to DT. One of the reasons to enable DT support in SoCFPGA is, that I need to support multiple different SPI controllers for this platform. This is the QSPI Cadence controller and the Designware SPI master controller. Both are implemented in the SoCFPGA. And enabling both controllers is only possible by using the new driver model (DM). The DM SPI code only supports DT based probing. So it was easier to move SoCFPGA to DT than to add the (deprecated) platform-data based probing to the DM SPI suport. Note that the image with the dtb embedded is u-boot-dtb.img. This needs to be used now for those DT enabled boards instead of u-boot.img. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Vince Bridgers <vbridger@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Pavel Machek <pavel@denx.de> Cc: Simon Glass <sjg@chromium.org>
2014-11-07 13:10:41 +00:00
armv7: ls1021a: Drop macro CONFIG_LS102XA Use CONFIG_ARCH_LS1021A instead. Signed-off-by: York Sun <york.sun@nxp.com>
2017-03-27 18:41:03 +00:00
dtb-$(CONFIG_ARCH_LS1021A) += ls1021a-qds-duart.dtb \
arm: ls1021aqds: Enable driver model lpuart serial driver Convert ls1021aqds_nor_lpuart and ls1021aqds_ddr4_nor_lpuart to driver model suport. Enable lpuart port driver. Signed-off-by: York Sun <york.sun@nxp.com> CC: Alison Wang <alison.wang@nxp.com> CC: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alison Wang <alison.wang@nxp.com>
2016-02-08 21:47:29 +00:00
ls1021a-qds-lpuart.dtb \
armv7: Add support of ls1021a-iot board The patch adds support for Freescale ls1021a-iot board. Signed-off-by: Feng Li <feng.li_2@nxp.com> [YS: rewrite commit message, fix whitespace in Kconfig] Reviewed-by: York Sun <york.sun@nxp.com>
2016-11-03 06:15:17 +00:00
ls1021a-twr-duart.dtb ls1021a-twr-lpuart.dtb \
Add support for the NXP LS1021A-TSN board The LS1021A-TSN is a development board built by VVDN/Argonboards in partnership with NXP. It features the LS1021A SoC and the first-generation SJA1105T Ethernet switch for prototyping implementations of a subset of IEEE 802.1 TSN standards. Supported boot media: microSD card (via SPL), QSPI flash. Rev. A of the board uses a Spansion S25FL512S_256K serial flash, which is 64 MB in size and has an erase sector size of 256KB (therefore, flashing the RCW would erase part of U-Boot). Rev. B and C of the board use a Spansion S25FL256S1 serial flash, which is only 32 MB in size but has an erase sector size of 64KB (therefore the RCW image can be flashed without erasing U-Boot). To avoid the problems above, the U-Boot base address has been selected at 0x100000 (the start of the 5th 256KB erase sector), which works for all board revisions. Actually 0x40000 would have been enough, but 0x100000 is common for all Layerscape devices. eTSEC3 is connecting directly to SJA1105 via an RGMII fixed-link, but SJA1105 is currently not supported by uboot. Therefore, eTSEC3 is disabled. Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com> Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com> Signed-off-by: Jianchao Wang <jianchao.wang@nxp.com> Signed-off-by: Changming Huang <jerry.huang@nxp.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> [Vladimir] Code taken from https://github.com/openil/u-boot (which itself is mostly copied from ls1021a-iot) and adapted with the following changes: - Add a008850 errata workaround - Converted eTSEC, MMC to DM to avoid all build warnings - Plugged in distro boot feature, including support for extlinux.conf - Added defconfig for QSPI boot - Added the board/freescale/ls1021atsn/README.rst for initial setup - Increased CONFIG_SYS_MONITOR_LEN so that the SPL malloc pool does not get overwritten during copying of the u-boot.bin payload from MMC to DDR. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-18 21:30:01 +00:00
ls1021a-iot-duart.dtb ls1021a-tsn.dtb
board/km: add support for seli8 design based on nxp ls102x The SELI8 design is a new tdm service unit card for Hitachi-Powergrids XMC and FOX product lines. It is based on NXP LS1021 SoC and it provides following interfaces: - IFC interface for NOR, NAND and external FPGA's - 1 x RGMII ETH for debug purposes - 2 x SGMII ETH for management communication via back-plane - 1 x uQE HDLC for management communication via back-plane - 1 x I2C for peripheral devices - 1 x SPI for peripheral devices - 1 x UART for debug logging It is foreseen that the design will be later re-used for another XMC and FOX service cards with similar SoC requirements. Signed-off-by: Rainer Boschung <rainer.boschung@hitachi-powergrids.com> Signed-off-by: Matteo Ghidoni <matteo.ghidoni@hitachi-powergrids.com> Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-22 18:18:11 +00:00
dtb-$(CONFIG_TARGET_PG_WCOM_SELI8) += ls1021a-pg-wcom-seli8.dtb
board/km: add support for expu1 design based on nxp The EXPU1 design is a new 40G capable ethernet service unit card for Hitachi-Powergrids wired-com product lines. The base SoC is same as for already added SELI8 card, consequently the already added u-boot support for SELI8 is reused. Signed-off-by: Rainer Boschung <rainer.boschung@hitachi-powergrids.com> Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com> [Fixed new line error at EOF] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-08 14:16:28 +00:00
dtb-$(CONFIG_TARGET_PG_WCOM_EXPU1) += ls1021a-pg-wcom-expu1.dtb
board/km: add support for seli8 design based on nxp ls102x The SELI8 design is a new tdm service unit card for Hitachi-Powergrids XMC and FOX product lines. It is based on NXP LS1021 SoC and it provides following interfaces: - IFC interface for NOR, NAND and external FPGA's - 1 x RGMII ETH for debug purposes - 2 x SGMII ETH for management communication via back-plane - 1 x uQE HDLC for management communication via back-plane - 1 x I2C for peripheral devices - 1 x SPI for peripheral devices - 1 x UART for debug logging It is foreseen that the design will be later re-used for another XMC and FOX service cards with similar SoC requirements. Signed-off-by: Rainer Boschung <rainer.boschung@hitachi-powergrids.com> Signed-off-by: Matteo Ghidoni <matteo.ghidoni@hitachi-powergrids.com> Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-22 18:18:11 +00:00
armv8: LS2080A: Rename LS2085A to reflect LS2080A LS2080A is a prime personality of Freescale’s LS2085A. It is a non-AIOP personality without support of DP-DDR, L2 switch, 1588, PCIe endpoint etc. So renaming existing LS2085A code base to reflect LS2080A (Prime personality) Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> [York Sun: Dropped #ifdef in cpu.c for cpu_type_list] Reviewed-by: York Sun <yorksun@freescale.com>
2015-11-09 11:12:07 +00:00
dtb-$(CONFIG_FSL_LSCH3) += fsl-ls2080a-qds.dtb \
arm: dts: ls2080aqds: add CONFIG_MULTI_DTB_FIT support Add support for selecting the appropriate DTS file depending on the SERDES protocol used. The fsl-ls2080a-qds DTS will be used by default if there isn't a DTS file specifically made for the current SERDES protocol. This patch adds the necessary DPMAC nodes (DPMAC 1-8) for protocol 42 (0x2A) on SD#1. Also, in case CONFIG_DM_ETH and CONFIG_MULTI_DTB_FIT are enabled implement the board_fit_config_name_match() function in order to choose the appropriate DTS. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-18 11:48:36 +00:00
fsl-ls2080a-qds-42-x.dtb \
armv8: ls2080ardb: Add QSPI-boot support QSPI-boot is supported on LS2088ARDB RevF board with LS2088A SoC. LS2088ARDB RevF Board has limitation that QIXIS can not be accessed. CONFIG_FSL_QIXIS is not enabled. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Suresh Gupta <suresh.gupta@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-04-28 05:11:35 +00:00
fsl-ls2080a-rdb.dtb \
armv8: ls2080ardb: Add LS2081ARDB board support LS2081ARDB board is similar to LS2080ARDB board with few differences It hosts LS2081A SoC Default boot source is QSPI-boot It does not have IFC interface RTC and QSPI flash device are different It provides QIXIS access via I2C Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Santan Kumar <santan.kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-04-27 09:38:07 +00:00
fsl-ls2081a-rdb.dtb \
armv8: ls1088ardb: Add support for LS1088ARDB platform LS1088A is an ARMv8 implementation. The LS1088ARDB is an evaluatoin platform that supports the LS1088A family SoCs. This patch add basic support of the platform. Signed-off-by: Alison Wang <alison.wang@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Raghav Dogra <raghav.dogra@nxp.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> [YS: Disabled NAND in board header file] Reviewed-by: York Sun <york.sun@nxp.com> WIP: disable NAND for LS1088ARDB
2017-08-31 10:42:54 +00:00
fsl-ls2088a-rdb-qspi.dtb \
armv8: ls1088aqds: Add support of LS1088AQDS This patch add support of LS1088AQDS platform. The LS1088A QorIQTM Development System (QDS) is a high-performance computing, evaluation, and development platform that supports the LS1088A QorIQ Architecture processor. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-08-31 10:42:55 +00:00
fsl-ls1088a-rdb.dtb \
armv8: lx2160ardb : Add support for LX2160ARDB platform LX2160ARDB is an evaluation board that supports LX2160A family SoCs. This patch add base support for this board. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com> Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com> Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: Pankit Garg <pankit.garg@nxp.com> Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Signed-off-by: Peng Ma <peng.ma@nxp.com> Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> [PK: Sqaush patches from Yinbo Zhu, Peng Ma, Chuanhua Han and re-arrange defconfig] Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2018-11-28 13:04:27 +00:00
fsl-ls1088a-qds.dtb \
arm: dts: ls1088aqds: add CONFIG_MULTI_DTB_FIT support Add support for selecting the appropriate DTS file depending on the SERDES protocol used. The fsl-ls2088a-qds DTS will be used by default if there isn't a DTS file specifically made for the current SERDES protocol. This patch adds support for the on-board ports (DPMAC 1,2 and 4,5) found on the SERDES protocols 21(0x15) and 29(0x1d) for SD#1. On the LS1088AQDS board EMDIO1 is used with two onboard RGMII PHYs (Realtek RTL8211FD-CG), as well as 2 input/output connectors for mezzanine cards. Configuration signals from the Qixis FPGA control the routing of the external MDIOs. Register 0x54 of the Qixis FPGA controls the routing of the EMDIO1 one of the 2 IO slots. As a consequence, a new node is added to describe register 0x54 as a MDIO mux controlled with child nodes describing all the IO slots as MDIO buses. Also, in case CONFIG_DM_ETH and CONFIG_MULTI_DTB_FIT are enabled implement the board_fit_config_name_match() function in order to choose the appropriate DTS. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-15 06:56:48 +00:00
fsl-ls1088a-qds-21-x.dtb \
fsl-ls1088a-qds-29-x.dtb \
armv8: ls1028ardb: Add support for LS1028ARDB LS1028A is an ARMv8 implementation. LS1028ARDB is an evaluation platform that supports the LS1028A family SoCs. This patch add basic support of the platform. Signed-off-by: Sudhanshu Gupta <sudhanshu.gupta@nxp.com> Signed-off-by: Rai Harninder <harninder.rai@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com> Signed-off-by: Tang Yuantian <andy.tang@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-04-10 08:43:34 +00:00
fsl-ls1028a-rdb.dtb \
armv8: ls1028aqds: add lpuart dts support Rename fsl-ls1028a-qds.dts to fsl-ls1028a-qds.dtsi so that it can be used as common device tree for lpuart and duart. Add lpuart device tree and duart device tree respectively for qds which are used with duart and lpuart console. Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com> Signed-off-by: Yuantian Tang <andy.tang@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-19 08:48:25 +00:00
fsl-ls1028a-qds-duart.dtb \
fsl-ls1028a-qds-lpuart.dtb \
lx2160aqds : Add support for LX2160AQDS platform LX2160AQDS is a development board that supports LX2160A family SoCs. This patch add base support for this board. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com> Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com> [PK: Sqaush patch for "secure boot defconfig" & add maintainer] Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-08 10:29:58 +00:00
fsl-lx2160a-rdb.dtb \
arm: dts: lx2160aqds: add nodes describing possible mezzanine cards Add device trees describing possible uses of mezzanine cards depending on the SERDES protocol employed. This patch adds DPAA2 networking support for the following protocols on each SERDES block: * SD #1: 3, 7, 19, 20 * SD #2: 11 Each SERDES block has a different device tree file per protocol supported, where the IO SLOTs used are enabled and PHYs located on the mezzanine cards are described. Also, dpmac nodes are edited and their associated phy-connection-type and phy-handle are added. Top DTS files are also added for each combination of protocol on the 3 SERDES blocks. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Razvan Ionut Cirjan <razvanionut.cirjan@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-27 12:21:14 +00:00
fsl-lx2160a-qds.dtb \
fsl-lx2160a-qds-3-x-x.dtb \
fsl-lx2160a-qds-3-11-x.dtb \
fsl-lx2160a-qds-7-x-x.dtb \
fsl-lx2160a-qds-7-11-x.dtb \
fsl-lx2160a-qds-19-x-x.dtb \
fsl-lx2160a-qds-19-11-x.dtb \
fsl-lx2160a-qds-20-x-x.dtb \
armv8: lx2162aqds: Add support for LX2162AQDS platform This patch add base support for LX2162AQDS board. LX2162AQDS board supports LX2162A family SoCs. This patch add basic support of platform. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Signed-off-by: hui.song <hui.song_1@nxp.com> Signed-off-by: Manish Tomar <manish.tomar@nxp.com> Signed-off-by: Vikas Singh <vikas.singh@nxp.com> Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-04 14:47:28 +00:00
fsl-lx2160a-qds-20-11-x.dtb \
fsl-lx2162a-qds.dtb\
fsl-lx2162a-qds-17-x.dtb\
fsl-lx2162a-qds-18-x.dtb\
fsl-lx2162a-qds-20-x.dtb
armv8/ls1043aqds: Spilt off board device tree Move new /chosen node out of the board device tree. Signed-off-by: Wenbin Song <wenbin.song@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-01-21 09:14:54 +00:00
dtb-$(CONFIG_FSL_LSCH2) += fsl-ls1043a-qds-duart.dtb \
armv8/ls1043aqds: Add lpuart support Add lpuart support using the driver model. Signed-off-by: Wenbin Song <wenbin.song@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-01-21 09:14:55 +00:00
fsl-ls1043a-qds-lpuart.dtb \
armv8: ls1012a: Add support of ls1012aqds board QorIQ LS1012A Development System (LS1012AQDS) is a high-performance development platform, with a complete debugging environment. The LS1012AQDS board supports the QorIQ LS1012A processor and is optimized to support the high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports. Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com> Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-03 13:11:34 +00:00
fsl-ls1043a-rdb.dtb \
armv8: ls1046aqds: Add LS1046AQDS board support LS1046AQDS Specification: ------------------------- Memory subsystem: * 8GByte DDR4 SDRAM (64bit bus) * 128 Mbyte NOR flash single-chip memory * 512 Mbyte NAND flash * 64 Mbyte high-speed SPI flash * SD connector to interface with the SD memory card Ethernet: * Two XFI 10G ports * Two SGMII ports * Two RGMII ports PCIe: supports Gen 1 and Gen 2 SATA 3.0: one SATA 3.0 port USB 3.0: two micro AB connector and one type A connector UART: supports two UARTs up to 115200 bps for console Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-09-07 09:56:14 +00:00
fsl-ls1046a-qds-duart.dtb \
armv8: ls1046aqds: add lpuart support LPUART0 is used by default, and it's using platform clock. Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-10-28 06:24:02 +00:00
fsl-ls1046a-qds-lpuart.dtb \
armv8: ls1046ardb: Add LS1046ARDB board support LS1046ARDB Specification: ------------------------- Memory subsystem: * 8GByte DDR4 SDRAM (64bit bus) * 512 Mbyte NAND flash * Two 64 Mbyte high-speed SPI flash * SD connector to interface with the SD memory card * On-board 4G eMMC Ethernet: * Two XFI 10G ports * Two SGMII ports * Two RGMII ports PCIe: * PCIe1 (SerDes2 Lane0) to miniPCIe slot * PCIe2 (SerDes2 Lane1) to x2 PCIe slot * PCIe3 (SerDes2 Lane2) to x4 PCIe slot SATA: * SerDes2 Lane3 to SATA port USB 3.0: one super speed USB 3.0 type A port one Micro-AB port UART: supports two UARTs up to 115200 bps for console Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-09-07 10:47:28 +00:00
fsl-ls1046a-rdb.dtb \
armv8: ls1046afrwy: Add support for LS1046AFRWY platform LS1046AFRWY board supports LS1046A family SoCs. This patch add base support for this board. Board support's 4GB ddr memory, i2c, micro-click module,microSD card, serial console,qspi nor flash,ifc nand flash,qsgmii network interface, usb 3.0 and serdes interface to support two x1gen3 pcie interface. Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: Pankit Garg <pankit.garg@nxp.com> Signed-off-by: Pramod Kumar <pramod.kumar_1@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-06 12:35:28 +00:00
fsl-ls1046a-frwy.dtb \
armv8: ls1012a: Add support of ls1012ardb board QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance development platform, with a complete debugging environment. The LS1012ARDB board supports the QorIQ LS1012A processor and is optimized to support the high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports. Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-03 13:11:35 +00:00
fsl-ls1012a-qds.dtb \
armv8: ls1012a: Add support of ls1012afrdm board QorIQ LS1012A FREEDOM (LS1012AFRDM) is a high-performance development platform, with a complete debugging environment. The LS1012AFRDM board supports the QorIQ LS1012A processor and is optimized to support the high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com> Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-03 13:11:36 +00:00
fsl-ls1012a-rdb.dtb \
board: ls1012a: LS1012A-2G5RDB board support LS1012A-2G5RDB belongs to LS1012A family with features 2 2.5G SGMII PFE MAC, SATA, USB 2.0/3.0, WiFi DDR, eMMC, QuadSPI, UART. Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-11 14:33:31 +00:00
fsl-ls1012a-2g5rdb.dtb \
board: ls1012a: FRWY-LS1012A board support FRWY-LS1012A belongs to LS1012A family with features 2 1G SGMII PFE MAC, Micro SD, USB 3.0, DDR, QuadSPI, Audio, UART. Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com> [yorks: rebase and fix SPDX tag] [yorks: fix board/freescale/ls1012afrdm/Kconfig] Reviewed-by: York Sun <york.sun@nxp.com>
2018-05-23 05:33:30 +00:00
fsl-ls1012a-frdm.dtb \
fsl-ls1012a-frwy.dtb
board: kontron: add sl28 support Add basic support for the Kontron SMARC-sAL28 board. This includes just the bare minimum to be able to bring up the board and boot linux. For now, the Single and Dual PHY variant is supported. Other variants will fall back to the basic variant. In particular, there is no watchdog support for now. This means that you have to disable the default watchdog, otherwise you'll end up in the recovery bootloader. See the board README for details. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Tom Rini <trini@konsulko.com> Tested-by: Heiko Thiery <heiko.thiery@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-10-15 21:08:57 +00:00
dtb-$(CONFIG_TARGET_SL28) += fsl-ls1028a-kontron-sl28.dtb \
board: sl28: add network variant 1 support This variant has one network port connected via RGMII and doesn't have any TSN capabilities out-of-the-box. Instead it has all four SerDes lanes available for customer use. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-01-07 23:08:57 +00:00
fsl-ls1028a-kontron-sl28-var1.dtb \
board: sl28: add network variant 2 support Although this variant has two external network ports, they are not (yet) supported by the bootloader because they are connected via an internal network switch. Otherwise its the same as the other variants. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-01-07 23:08:58 +00:00
fsl-ls1028a-kontron-sl28-var2.dtb \
board: kontron: add sl28 support Add basic support for the Kontron SMARC-sAL28 board. This includes just the bare minimum to be able to bring up the board and boot linux. For now, the Single and Dual PHY variant is supported. Other variants will fall back to the basic variant. In particular, there is no watchdog support for now. This means that you have to disable the default watchdog, otherwise you'll end up in the recovery bootloader. See the board README for details. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Tom Rini <trini@konsulko.com> Tested-by: Heiko Thiery <heiko.thiery@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-10-15 21:08:57 +00:00
fsl-ls1028a-kontron-sl28-var3.dtb \
fsl-ls1028a-kontron-sl28-var4.dtb \
dm: ls1021a: Bring in ls1021a dts files from linux kernel Bring in required device tree files for ls1021a from Linux. These are initially unchanged and have a number of pieces not needed by U-Boot. Signed-off-by: Haikun Wang <Haikun.Wang@freescale.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-03-25 12:23:26 +00:00
board: traverse: add initial Ten64 support The Ten64 is a networking-oriented MiniITX board using the NXP LS1088A SoC. This patch provides the bare minimum to support Ten64 boards under U-Boot for distroboot. Some related drivers have not yet been submitted and this basic support lacks some of the opinionated defaults provided by our firmware distribution. Signed-off-by: Mathew McBride <matt@traverse.com.au> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-01-31 13:04:43 +00:00
dtb-$(CONFIG_TARGET_TEN64) += fsl-ls1088a-ten64.dtb
db820c: add qualcomm dragonboard 820C support This commit adds support for 96Boards Dragonboard820C. The board is based on APQ8086 Qualcomm Soc, complying with the 96Boards specification. Features - 4x Kyro CPU (64 bit) up to 2.15GHz - USB2.0 - USB3.0 - ISP - Qualcomm Hexagon DSP - SD 3.0 (UHS-I) - UFS 2.0 - Qualcomm Adreno 530 GPU - GPS - BT 4.2 - Wi-Fi 2.4GHz, 5GHz (802.11ac) - PCIe 2.0 - MIPI-CSI, MIPI-DSI - I2S U-Boot boots chained from LK (LK implements the fastboot protocol) in 64-bit mode. For detailed build instructions see readme.txt in the board directory. Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
2018-01-10 10:33:50 +00:00
dtb-$(CONFIG_TARGET_DRAGONBOARD410C) += dragonboard410c.dtb
dtb-$(CONFIG_TARGET_DRAGONBOARD820C) += dragonboard820c.dtb
board: samsung: add Samsung Galaxy S9/S9+(SM-G96x0) board Samsung S9 SM-G9600 - Snapdragon SDM845 version of the phone, for China \ Hong Kong markets. Has unlockable bootloader, unlike SM-G960U (American market version), which allows running u-boot as a chain-loaded bootloader. Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Tom Rini <trini@konsulko.com>
2021-10-17 10:44:32 +00:00
dtb-$(CONFIG_TARGET_STARQLTECHN) += starqltechn.dtb
board: qualcomm: Add support for QCS404 EVB Add support for Qualcomm QCS404 SoC based evaluation board. Features: - Qualcomm Snapdragon QCS404 SoC - 1GiB RAM - 8GiB eMMC, uSD slot U-boot is chain loaded by ABL in 64-bit mode as part of boot.img. For detailed build and boot instructions, refer to doc/board/qualcomm/qcs404.rst. Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
2022-07-12 07:12:12 +00:00
dtb-$(CONFIG_TARGET_QCS404EVB) += qcs404-evb.dtb
board: Add Qualcomm Dragonboard 410C support This commit add support for 96Boards Dragonboard410C. It is board based on APQ8016 Qualcomm SoC, complying with 96boards specification. Features (present out of the box): - 4x Cortex A53 (ARMv8) - 2x USB Host port - 1x USB Device port - 4x LEDs - 1x HDMI connector - 1x uSD connector - 3x buttons (Power, Vol+, Vol-/Reset) - WIFI, Bluetooth with integrated antenna - 8GiB eMMC U-Boot boots chained with fastboot in 64-bit mode. For detailed build instructions see readme.txt in board directory. Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Tested-by: Simon Glass <sjg@chromium.org>
2016-03-31 21:12:33 +00:00
board: Add new Samsung "stemmy" board based on ST-Ericsson U8500 The ST-Ericsson U8500 SoC has been used in mass-production for some Android smartphones released around 2012. In particular, Samsung has released more than 5 different smartphones based on U8500, e.g. - Samsung Galaxy S III mini (GT-I8190) "golden" - Samsung Galaxy S Advance (GT-I9070) "janice" - Samsung Galaxy Xcover 2 (GT-S7710) "skomer" and a few others. Mainline Linux has great support for the Ux500 SoC, so these smartphones can also run Linux mainline quite well. Unfortunately, the original Samsung bootloader used on these devices has limitations that prevent booting Linux mainline directly. It keeps the L2 cache enabled, which causes Linux to crash very early, shortly after decompressing the kernel. Using U-Boot allows to circumvent these limitations. We can let the Samsung bootloader chain-load U-Boot and U-Boot locks the L2 cache before booting into Linux. U-Boot has several other advantages - it supports device-trees directly and we are no longer limited to flashing Android boot images through Samsung's proprietary download mode. The Samsung "stemmy" board covers all Samsung devices based on U8500. Add minimal support for "stemmy". For now only UART is supported but this will be extended later. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-04 17:45:19 +00:00
dtb-$(CONFIG_TARGET_STEMMY) += ste-ux500-samsung-stemmy.dtb
ARM: DTS: add STM32F469 Discovery board support This DT file comes from kernel v4.15-rc1 stm32f469-pinctrl.dtsi header has been updated with correct STMicroelectronics Copyright. Remove the paragraph about writing to the Free Software Foundation's mailing address as requested by checkpatch. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-12-12 08:49:42 +00:00
dtb-$(CONFIG_STM32F4) += stm32f429-disco.dtb \
ARM: dts: stm32: Add STM32F429 Evaluation board support This DT file comes from kernel v4.15, this board offers : _ STM32F429NIH6 microcontroller _ 4.3” color TFT LCD with resistive touchscreen (480 x 272 pixels) _ Six 5 V power supply options: Power jack ST-LINK/V2 USB connector User USB HS connector User USB FS1 connector User USB FS2 connector Daughterboard _ SAI Audio DAC, stereo audio jack which supports headset with microphone _ Stereo digital microphone, audio terminal connector used to connect external speakers _ 2 GBytes (or more) SDIO interface MicroSD card _ RF EEPROM on I2 C compatible serial interface _ RS-232 communication _ IrDA transceiver _ JTAG/SWD and ETM trace debug support, ST-LINK/V2 embedded _ IEEE-802.3-2002 compliant Ethernet connector _ Camera module _ 8M x 32-bit SDRAM, 1M x 16-bit SRAM and 8M x 16-bit NOR Flash _ Joystick with 4-directional control and selector _ Reset, Wakeup and Tamper buttons _ 4 color user LEDs _ Extension connectors & memory connectors for daughterboard or wrapping board _ USB OTG HS and FS with Micro-AB connectors _ RTC with backup battery _ CAN2.0A/B compliant connection _ Potentiometer _ Motor control connector Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-01-18 12:39:33 +00:00
stm32429i-eval.dtb \
ARM: DTS: add STM32F469 Discovery board support This DT file comes from kernel v4.15-rc1 stm32f469-pinctrl.dtsi header has been updated with correct STMicroelectronics Copyright. Remove the paragraph about writing to the Free Software Foundation's mailing address as requested by checkpatch. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-12-12 08:49:42 +00:00
stm32f469-disco.dtb
ARM: DTS: stm32: add STM32F429 SoC and its Discovery board support All these files comes from kernel v4.15-rc1. Update some header with correct STMicroelectronics Copyright. Remove the paragraph about writing to the Free Software Foundation's mailing address as requested by checkpatch. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-12-12 08:49:32 +00:00
stm32f7: add support for stm32f769 disco board This board support stm32f7 family device stm32f769-I with 2MB internal Flash & 512KB RAM. STM32F769 lines offer the performance of the Cortex-M7 core (with double precision floating point unit) running up to 216 MHz. To compile for stm32f769 board, use same defconfig as stm32f746-disco, the only difference is to pass "DEVICE_TREE=stm32f769-disco". Signed-off-by: Vikas Manocha <vikas.manocha@st.com> cc: Christophe KERELLO <christophe.kerello@st.com>
2017-04-10 22:03:06 +00:00
dtb-$(CONFIG_STM32F7) += stm32f746-disco.dtb \
ARM: dts: Add support for stm32f746-evaluation board support This board offers: _ STM32F746NGH6 microcontroller with 1 Mbyte Flash and 320+4 Kbytes RAM _ Six 5 V power supply options: Power jack ST-LINK/V2-1 USB connector User USB HS connector User USB FS1 connector User USB FS2 connector Daughterboard _ SAI Audio DAC, stereo audio jack which supports headset with microphone _ Stereo digital microphone, audio jack connector used to connect external speakers _ 2 Gbytes (or more) SDMMC interface microSD card _ RF-EEPROM on I2C compatible serial interface _ RS-232 communication _ IrDA transceiver _ JTAG/SWD and ETM trace debug support, ST-LINK/V2-1 embedded _ IEEE-802.3-2002 compliant Ethernet connector _ Camera module _ 8Mx32 bit SDRAM, 1Mx16 bit SRAM & 8Mx16 bit Nor Flash _ 512 Mbits QuadSPI Nor Flash _ 5.7 inch 640x480 pixel TFT color LCD with capacitive touch panel _ Joystick with 4-direction control and selector _ Reset, WakeUp/Tamper or key button _ 4 color user LEDs _ Extension connectors & memory connectors for daughterboard or wrapping board _ USB OTG HS and FS with Micro-AB connectors _ RTC with backup battery _ CAN 2.0A/B compliant connection _ Potentiometer _ Motor control connector More detailed information are available here : http://www.st.com/en/evaluation-tools/stm32746g-eval.html To compile stm32f746-eval board, use same defconfig as stm32f746-disco, the only difference is to pass "DEVICE_TREE=stm32746g-eval". Signed-off-by: Christophe Priouzeau <christophe.priouzeau@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Vikas Manocha <vikas.manocha@st.com>
2018-02-16 12:27:03 +00:00
stm32f769-disco.dtb \
stm32746g-eval.dtb
ARM: DTS: stm32: add stm32h743i-eval files This file is imported from linux kernel v4.13 Add device tree support for STM32H743 evaluation board. This board offers : _ STM32H743XIH6 microcontroller with 2 Mbytes of Flash memory and 1 Mbyte of RAM in TFBGA240+25 package _ 5.7” 640x480 TFT color LCD with touch screen _ Ethernet compliant with IEEE-802.3-2002 _ USB OTG HS and FS _ I2 C compatible serial interface _ RTC with rechargeable backup battery _ SAI Audio DAC _ ST-MEMS digital microphones _ 8-Gbyte (or more) SDIO3.0 interface microSD™ card _ 8Mx32bit SDRAM, 1Mx16bit SRAM and 8Mx16bit NOR Flash _ 1-Gbit Twin Quad-SPI NOR Flash _ Potentiometer _ 4 colored user LEDs _ Reset, wakeup, tamper or key buttons _ Joystick with 4-direction control and selector _ Board connectors : Power jack 3 USB with Micro-AB RS-232 communications Ethernet RJ45 FD-CAN compliant connection Stereo headset jack including analog microphone input 2 audio jacks for external speakers microSD™ card JTAG/SWD and ETM trace _ Expansion connectors: Extension connectors and memory connectors for daughterboard or wire-wrap board _ Flexible power-supply options: ST-LINK USB VBUS or external sources _ On-board ST-LINK/V2-1 debugger/programmer with USB re-enumeration capability: mass storage, virtual COM port and debug port Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-13 16:00:10 +00:00
dtb-$(CONFIG_STM32H7) += stm32h743i-disco.dtb \
ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6 This patchset has following changes: - introduce stm32h750.dtsi to support stm32h750 value line - add pin groups for usart3/uart4/spi1/sdmmc2 - add stm32h750i-art-pi.dtb (arch/arm/boot/dts/Makefile) - add stm32h750i-art-pi.dts to support art-pi board - add stm32h750i-art-pi-u-boot.dtsi to support art-pi board (u-boot) art-pi board component: - 8MiB qspi flash - 16MiB spi flash - 32MiB sdram - ap6212 wifi&bt&fm the detail board information can be found at: https://art-pi.gitee.io/website/ Signed-off-by: dillon min <dillon.minfei@gmail.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-04-09 07:28:44 +00:00
stm32h743i-eval.dtb \
stm32h750i-art-pi.dtb
ARM: DTS: stm32: add stm32f746-disco device tree files This patch adds the DTS source files needed for stm32f746-disco board The files are based on the stm32f429/469 files from current linux kernel. Source for "arch/arm/dts/armv7-m.dtsi": Linux: "arch/arm/boot/dts/armv7-m.dtsi" Signed-off-by: Michael Kurz <michi.kurz@gmail.com> Acked-by: Vikas MANOCHA <vikas.manocha@st.com>
2017-01-22 15:04:23 +00:00
ARM: dts: suniv: Add device tree files and bindings for F1C100s Add device tree files for suniv and Lichee Pi Nano it is a board based on F1C100s. dt-bindings/dts are synced with 5.16.0 Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-01-29 15:23:08 +00:00
dtb-$(CONFIG_MACH_SUNIV) += \
suniv-f1c100s-licheepi-nano.dtb
sunxi: dts: Sync all dts files with upstream kernel Bring all the sunxi dts files (and update existing ones) from mripard/sunxi/dt-for-4.1 (which will be merged into upstream master any day now). This is necessary so that we can move all sunxi boards over to the driver model. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-04-15 17:03:49 +00:00
dtb-$(CONFIG_MACH_SUN4I) += \
sun4i-a10-a1000.dtb \
sun4i-a10-ba10-tvbox.dtb \
sun4i-a10-chuwi-v7-cw0825.dtb \
sun4i-a10-cubieboard.dtb \
sunxi: Add defconfig and dts for Dserve DSRV9703C tablet The Dserve DSRV9703C is a 9.7" A10 tablet with a 1024x768 ips LCD, 1G RAM, 4GB flash, a Focaltech FT5406EE8 touchscreen and rtl8188ctv wifi. The dts file is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-03-19 07:55:47 +00:00
sun4i-a10-dserve-dsrv9703c.dtb \
sunxi: dts: Sync all dts files with upstream kernel Bring all the sunxi dts files (and update existing ones) from mripard/sunxi/dt-for-4.1 (which will be merged into upstream master any day now). This is necessary so that we can move all sunxi boards over to the driver model. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-04-15 17:03:49 +00:00
sun4i-a10-gemei-g9.dtb \
sun4i-a10-hackberry.dtb \
sun4i-a10-hyundai-a7hd.dtb \
sun4i: Add dts and defconfig for iNet-1 based tablets The iNet-tek iNet-1 PCB is a PCB found in various generic 10.1" 1024x600 A10 based tablets such as the Point of View Protab2 XXL and the Cherry M1007. This patch has been tested on both rev2 and rev5 of this board / these tablets. These tablets feature the usual connectors: headphone, mini hdmi, power-barrel, mini-usb and a micro-sd slot. The dts is identical to the dts submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-09-09 07:46:30 +00:00
sun4i-a10-inet1.dtb \
sunxi: dts: Add minimal dts files for board which lack a dts sofar u-boot has support for a number of boards for which a dts file still needs to be written, add minimal dts files for these boards so that we can switch them over to driver-model / fdt. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-23 15:04:19 +00:00
sun4i-a10-inet-3f.dtb \
sun4i-a10-inet-3w.dtb \
sunxi: dts: Sync all dts files with upstream kernel Bring all the sunxi dts files (and update existing ones) from mripard/sunxi/dt-for-4.1 (which will be merged into upstream master any day now). This is necessary so that we can move all sunxi boards over to the driver model. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-04-15 17:03:49 +00:00
sun4i-a10-inet97fv2.dtb \
sun4i: Add defconfig and dts for inet9f-rev03 based tablets The inet9f-rev03 pcb is specially designed for gaming tablets, such as the qware tb-g100 tablet. These 7" tablets feature a dpad, firebuttons and 2 joysticks on the sides of the screen. Besides this they have the usual connectors: power-barrel, mini usb, mini hdmi, headphone and micro-sd slot. The dts is identical to the dts submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-09-08 20:28:30 +00:00
sun4i-a10-inet9f-rev03.dtb \
sunxi: dts: Sync with kernel Sync the sunxi dts files with the changes queued up for kernel-4.3 in mripard's sunxi/dt-for-4.3 branch. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-08-05 15:39:14 +00:00
sun4i-a10-itead-iteaduino-plus.dtb \
sunxi: dts: Add dts files which have been submitted but not yet merged upstream We need dts files for all boards we support, so bring in a few unmerged ones, these will be replaced with the upstream merged versions the next time we sync dts files. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-04-23 12:27:01 +00:00
sun4i-a10-jesurun-q5.dtb \
sunxi: dts: Sync all dts files with upstream kernel Bring all the sunxi dts files (and update existing ones) from mripard/sunxi/dt-for-4.1 (which will be merged into upstream master any day now). This is necessary so that we can move all sunxi boards over to the driver model. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-04-15 17:03:49 +00:00
sun4i-a10-marsboard.dtb \
sun4i-a10-mini-xplus.dtb \
sun4i-a10-mk802.dtb \
sun4i-a10-mk802ii.dtb \
sun4i-a10-olinuxino-lime.dtb \
sun4i: Add defconfig and dts for the pov protab2-ips9 tablet The Point of View protab2-ips9 is a tablet with a 9" ips 1024x768 lcd screen, microsd slot, headphones, mini hdmi, mini usb b and power barrel connectors. The dts file is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-09-05 08:50:56 +00:00
sun4i-a10-pcduino.dtb \
sunxi: Sync dts files with the upstream kernel Sync dts files with the upstream kernel including changes queued for 4.6: https://git.kernel.org/cgit/linux/kernel/git/mripard/linux.git/commit/?h=sunxi/dt-for-4.6 Note this adds a number of new unused board dts files. I've asked the authors of the kernel commits adding these to submit a matching defconfig to u-boot. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-03-14 16:37:09 +00:00
sun4i-a10-pcduino2.dtb \
ARM: dts: sun4i: Sync from Linux v5.18-rc1 Copy the devicetree source for the A10 SoC and all existing boards verbatim from the Linux v5.18-rc1 tag. The previous version of this change was only partially applied. Fixes: 4746694cba74 ("ARM: dts: sun4i: Sync from Linux v5.18-rc1") Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-05-26 03:26:02 +00:00
sun4i-a10-pov-protab2-ips9.dtb \
sun4i-a10-topwise-a721.dtb
sunxi: dts: Sync all dts files with upstream kernel Bring all the sunxi dts files (and update existing ones) from mripard/sunxi/dt-for-4.1 (which will be merged into upstream master any day now). This is necessary so that we can move all sunxi boards over to the driver model. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-04-15 17:03:49 +00:00
dtb-$(CONFIG_MACH_SUN5I) += \
sunxi: Add support for the Auxtek-T003 HDMI stick The Auxtek-T003 HDMI stick is an A10s based HDMI stick with USB wifi, and composite video out support. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-08-05 15:50:03 +00:00
sun5i-a10s-auxtek-t003.dtb \
sunxi: dts: Sync all dts files with upstream kernel Bring all the sunxi dts files (and update existing ones) from mripard/sunxi/dt-for-4.1 (which will be merged into upstream master any day now). This is necessary so that we can move all sunxi boards over to the driver model. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-04-15 17:03:49 +00:00
sun5i-a10s-auxtek-t004.dtb \
sun5i-a10s-mk802.dtb \
sun5i-a10s-olinuxino-micro.dtb \
sun5i-a10s-r7-tv-dongle.dtb \
sun5i: Add A10s-Wobo-i5 defconfig and dts The Wobo i5 top set box is a somewhat curious A10s based top set box, it uses an AXP209 rather then the AXP152 usually used in combination with the A10s. It has an ethernet phy connected to PORTD rather then PORTA, and its built-in usb wifi is connected via the otg controller. The dts file changes are identical to the changes submitted to the upstream kernel. Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-09-07 20:43:57 +00:00
sun5i-a10s-wobo-i5.dtb \
sunxi: dts: Add minimal dts files for board which lack a dts sofar u-boot has support for a number of boards for which a dts file still needs to be written, add minimal dts files for these boards so that we can switch them over to driver-model / fdt. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-23 15:04:19 +00:00
sun5i-a13-ampe-a76.dtb \
sunxi: Add defconfig and dts for Difrence DIT4350 tablet The Difrnce dit4350 tablet is a tiny tablet with a 4.3" 16:9 480x272 LCD, A13 SoC, 512M RAM, 4G NAND, solomon systech ssd2532qn6 touchscreen at i2c1 address 0x48, Memsic MXC622X accelerometer at i2c1 address 0x15 and rtl8188etv wifi. The dts file is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-03-10 21:35:56 +00:00
sun5i-a13-difrnce-dit4350.dtb \
sun5i: Add defconfig and dts file for the Empire Electronix D709 tablet The Empire Electronix D709 tablet is a fairly standard 7" A13 tablet, featuring usb-wifi, a micro-sd slot, micro-usb otg and headphone jack. Empire Electronix is written on the back of the tablet, the D709 model info can be found in the about tablet menu in android. The PCB has no markings to speak of. This dts file is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-12-20 11:30:18 +00:00
sun5i-a13-empire-electronix-d709.dtb \
sun5i: Add defconfig and dts file for the Empire Electronix M712 tablet Add a defconfig and dts file for the Empire Electronix M712 tablet, this is a 7" A13 tablet, with micro-usb (otg), headphone and micro-sd slots on the outside. It uses a Goodix gt811 touchscreen controller, a RTL8188CTV wifi chip and a DMART06 (1238a4) accelerometer. The dts file is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-08-19 10:21:49 +00:00
sun5i-a13-empire-electronix-m712.dtb \
sunxi: dts: Sync all dts files with upstream kernel Bring all the sunxi dts files (and update existing ones) from mripard/sunxi/dt-for-4.1 (which will be merged into upstream master any day now). This is necessary so that we can move all sunxi boards over to the driver model. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-04-15 17:03:49 +00:00
sun5i-a13-hsg-h702.dtb \
sunxi: dts: Add minimal dts files for board which lack a dts sofar u-boot has support for a number of boards for which a dts file still needs to be written, add minimal dts files for these boards so that we can switch them over to driver-model / fdt. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-23 15:04:19 +00:00
sun5i-a13-inet-86vs.dtb \
sunxi: Add inet98v_rev2 defconfig and dts file The inet98v_rev2 is a pcb used in generic A13 based tablets. It features volume buttons, a power barrel, micro-usb otg, headphone connector and a power button. The dts file is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-08-25 12:20:49 +00:00
sun5i-a13-inet-98v-rev2.dtb \
ARM: dts: sunxi: A13/A31/A23/A33: Sync from Linux v5.18-rc1 Copy the devicetree source for the A10s/A13/GR8, A31(s), and A23/A33/R16 SoCs and all existing boards from the Linux v5.18-rc1 tag. These changes are combined into one commit due to interdependencies: - The unit addresses were removed from bitbanged I2C buses, which drives a Kconfig default change. This affects sun5i-a13-utoo-p66.dts and sun6i-a31-colombus.dts. - The pinctrl nodes were renamed, including some used by the shared header sunxi-reference-design-tablet.dtsi. To maintain ABI compatibility with existing LTS kernels, one change moving some IP blocks to the r_intc interrupt controller is excluded. This effectively reverts Linux commits 994e5818392c and 9fdef3c3d8c2. This commit renames the file sun8i-r16-nintendo-nes-classic-edition.dts to sun8i-r16-nintendo-nes-classic.dts to match the Linux tree. This commit also adds the following new board devicetrees: - sun5i-a13-licheepi-one.dts - sun5i-a13-pocketbook-touch-lux-3.dts - sun5i-gr8-evb.dts - sun8i-a23-ippo-q8h-v1.2.dts - sun8i-a23-ippo-q8h-v5.dts - sun8i-a33-et-q8-v1.6.dts - sun8i-a33-ippo-q8h-v1.2.dts - sun8i-r16-nintendo-super-nes-classic.dts As with the other SoCs, updates of note are conversion of GPIO pull-up from pinconf to GPIO flags and renaming the detection GPIO properties in the USB PHY nodes. Signed-off-by: Samuel Holland <samuel@sholland.org>
2022-04-27 20:31:24 +00:00
sun5i-a13-licheepi-one.dtb \
sunxi: dts: Sync all dts files with upstream kernel Bring all the sunxi dts files (and update existing ones) from mripard/sunxi/dt-for-4.1 (which will be merged into upstream master any day now). This is necessary so that we can move all sunxi boards over to the driver model. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-04-15 17:03:49 +00:00
sun5i-a13-olinuxino.dtb \
sun5i-a13-olinuxino-micro.dtb \
ARM: dts: sunxi: A13/A31/A23/A33: Sync from Linux v5.18-rc1 Copy the devicetree source for the A10s/A13/GR8, A31(s), and A23/A33/R16 SoCs and all existing boards from the Linux v5.18-rc1 tag. These changes are combined into one commit due to interdependencies: - The unit addresses were removed from bitbanged I2C buses, which drives a Kconfig default change. This affects sun5i-a13-utoo-p66.dts and sun6i-a31-colombus.dts. - The pinctrl nodes were renamed, including some used by the shared header sunxi-reference-design-tablet.dtsi. To maintain ABI compatibility with existing LTS kernels, one change moving some IP blocks to the r_intc interrupt controller is excluded. This effectively reverts Linux commits 994e5818392c and 9fdef3c3d8c2. This commit renames the file sun8i-r16-nintendo-nes-classic-edition.dts to sun8i-r16-nintendo-nes-classic.dts to match the Linux tree. This commit also adds the following new board devicetrees: - sun5i-a13-licheepi-one.dts - sun5i-a13-pocketbook-touch-lux-3.dts - sun5i-gr8-evb.dts - sun8i-a23-ippo-q8h-v1.2.dts - sun8i-a23-ippo-q8h-v5.dts - sun8i-a33-et-q8-v1.6.dts - sun8i-a33-ippo-q8h-v1.2.dts - sun8i-r16-nintendo-super-nes-classic.dts As with the other SoCs, updates of note are conversion of GPIO pull-up from pinconf to GPIO flags and renaming the detection GPIO properties in the USB PHY nodes. Signed-off-by: Samuel Holland <samuel@sholland.org>
2022-04-27 20:31:24 +00:00
sun5i-a13-pocketbook-touch-lux-3.dtb \
sun5i: Add q8_a13_tablet defconfig and dts This commits adds a generic support for q8 formfactor a13 based tablets. These tablets ship in many variants, with the difference mainly being the touchscreen controller / accelerometer / wifi chip used. The wifi is USB based, and thus not listed in devicetree. ATM the kernel does not support the touchscreen / accelerometer on these devices. In the future we may need multiple configs with different CONFIG_DEFAULT_DEVICE_TREE settings, this depends on how we solve the hw differences on the kernel side. For now this will suffice. The dts files are identical to the dts files submitted to the upstream kernel for these tablets. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-09-05 15:01:31 +00:00
sun5i-a13-q8-tablet.dtb \
sunxi: Add CHIP support The C.H.I.P. is a small SBC with an Allwinner R8, 8GB of NAND, 512MB of RAM, USB host and OTG, a wifi / bluetooth combo chip, an audio/video jack and two connectors to plug additional boards on top of it. The DT is identical to the DT submitted to the upstream kernel. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-10-15 20:04:10 +00:00
sun5i-a13-utoo-p66.dtb \
sunxi: Sync GR8 DTS and AXP209 with the kernel Those DT will be part of 4.10, sync them so we can have our own config. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Jagan Teki <jagan@openedev.com>
2017-02-27 17:22:14 +00:00
sun5i-gr8-chip-pro.dtb \
ARM: dts: sunxi: A13/A31/A23/A33: Sync from Linux v5.18-rc1 Copy the devicetree source for the A10s/A13/GR8, A31(s), and A23/A33/R16 SoCs and all existing boards from the Linux v5.18-rc1 tag. These changes are combined into one commit due to interdependencies: - The unit addresses were removed from bitbanged I2C buses, which drives a Kconfig default change. This affects sun5i-a13-utoo-p66.dts and sun6i-a31-colombus.dts. - The pinctrl nodes were renamed, including some used by the shared header sunxi-reference-design-tablet.dtsi. To maintain ABI compatibility with existing LTS kernels, one change moving some IP blocks to the r_intc interrupt controller is excluded. This effectively reverts Linux commits 994e5818392c and 9fdef3c3d8c2. This commit renames the file sun8i-r16-nintendo-nes-classic-edition.dts to sun8i-r16-nintendo-nes-classic.dts to match the Linux tree. This commit also adds the following new board devicetrees: - sun5i-a13-licheepi-one.dts - sun5i-a13-pocketbook-touch-lux-3.dts - sun5i-gr8-evb.dts - sun8i-a23-ippo-q8h-v1.2.dts - sun8i-a23-ippo-q8h-v5.dts - sun8i-a33-et-q8-v1.6.dts - sun8i-a33-ippo-q8h-v1.2.dts - sun8i-r16-nintendo-super-nes-classic.dts As with the other SoCs, updates of note are conversion of GPIO pull-up from pinconf to GPIO flags and renaming the detection GPIO properties in the USB PHY nodes. Signed-off-by: Samuel Holland <samuel@sholland.org>
2022-04-27 20:31:24 +00:00
sun5i-gr8-evb.dtb \
sunxi: Add CHIP support The C.H.I.P. is a small SBC with an Allwinner R8, 8GB of NAND, 512MB of RAM, USB host and OTG, a wifi / bluetooth combo chip, an audio/video jack and two connectors to plug additional boards on top of it. The DT is identical to the DT submitted to the upstream kernel. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-10-15 20:04:10 +00:00
sun5i-r8-chip.dtb
sunxi: dts: Sync all dts files with upstream kernel Bring all the sunxi dts files (and update existing ones) from mripard/sunxi/dt-for-4.1 (which will be merged into upstream master any day now). This is necessary so that we can move all sunxi boards over to the driver model. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-04-15 17:03:49 +00:00
dtb-$(CONFIG_MACH_SUN6I) += \
sun6i-a31-app4-evb1.dtb \
sun6i-a31-colombus.dtb \
sun6i-a31-hummingbird.dtb \
sun6i-a31-i7.dtb \
sun6i-a31-m9.dtb \
sunxi: Add new Mele_A1000G_quad defconfig The Mele A1000G-quad and the Mele M9 have the same PCB, sofar we've been using the same defconfig (and dts on the kernel side) for both models. Unfortunately this does not work for the otg controller, on the M9 this is routed to a micro-usb connector on the outside, while as on the A1000G-quad it is connected to an usb to sata bridge. This commit adds a new defconfig for the Mele-A1000G-quad to allow using different otg controller settings on the 2 boards. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-06-01 14:37:24 +00:00
sun6i-a31-mele-a1000g-quad.dtb \
sunxi: dts: Add minimal dts files for board which lack a dts sofar u-boot has support for a number of boards for which a dts file still needs to be written, add minimal dts files for these boards so that we can switch them over to driver-model / fdt. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-23 15:04:19 +00:00
sun6i-a31-mixtile-loftq.dtb \
sunxi: Add defconfig and dts for colorfly e708 q1 tablet The colorfly e708 q1 is a 7" tablet which is clearly marked as colorfly e708 q1 on the back. It features a 9:16 800x1280 IPS LCD, A31s SoC, 1GB RAM, 8G NAND, ilitek 2139qt004 touchscreen on i2c-1 addr 0x41, stk8313 accelerometer on i2c-2 addr 0x22 and a rtl8188etv wifi chip. The added dts is identical to the dts submitted to the upstream kernel, note this commit also syncs axp22x.dtsi and sun6i-a31.dtsi with the upstream kernel as the added dts depends on these. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-03-09 21:45:23 +00:00
sun6i-a31s-colorfly-e708-q1.dtb \
sunxi: dts: Add minimal dts files for board which lack a dts sofar u-boot has support for a number of boards for which a dts file still needs to be written, add minimal dts files for these boards so that we can switch them over to driver-model / fdt. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-23 15:04:19 +00:00
sun6i-a31s-cs908.dtb \
sun6i: Add defconfig and dts file for tablets using the inet-q972 PCB Add a defconfig and dts file for tablets using the generic inet-q972 PCB. Tablets with this PCB feature a mini-hdmi output, micro-usb usb-host, micro-usb usb-otg, 3.5mm headphone jack, a micro sd slot, (mini) power-barrel and an usb wifi module. This has been tested on a 9.7" 1024x768 qware qw tb9718-qhd tablet. The dts files are identical to the ones submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-08-18 17:50:42 +00:00
sun6i-a31s-inet-q972.dtb \
sunxi: Add defconfig for the Sinovoip BPI-M2 board The Sinovoip BPI-M2 is a SBC board based on the A31s SoC it features 1G RAM, a microsd slot, Gbit ethernet, 4 usb-a USB-2 ports, ir receiver, stereo headphone jack and hdmi video output. The dts changes are identical to the dts files submitted upstream. A few notes on the use if dldo and aldo regulators. DLDO1 is used for Vdd for the ethernet phy, ALDO2 is used for AVdd for the ethernet phy. ALDO1 is used to power the sdio wifi module. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-10-13 21:57:03 +00:00
sun6i-a31s-primo81.dtb \
sunxi: Sync dts files with the upstream kernel Sync dts files with the upstream kernel including changes queued for 4.6: https://git.kernel.org/cgit/linux/kernel/git/mripard/linux.git/commit/?h=sunxi/dt-for-4.6 Note this adds a number of new unused board dts files. I've asked the authors of the kernel commits adding these to submit a matching defconfig to u-boot. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-03-14 16:37:09 +00:00
sun6i-a31s-sina31s.dtb \
sun6i-a31s-sinovoip-bpi-m2.dtb \
sun6i-a31s-yones-toptech-bs1078-v2.dtb
sunxi: dts: Sync all dts files with upstream kernel Bring all the sunxi dts files (and update existing ones) from mripard/sunxi/dt-for-4.1 (which will be merged into upstream master any day now). This is necessary so that we can move all sunxi boards over to the driver model. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-04-15 17:03:49 +00:00
dtb-$(CONFIG_MACH_SUN7I) += \
sunxi: dts: Add minimal dts files for board which lack a dts sofar u-boot has support for a number of boards for which a dts file still needs to be written, add minimal dts files for these boards so that we can switch them over to driver-model / fdt. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-23 15:04:19 +00:00
sun7i-a20-ainol-aw1.dtb \
sunxi: dts: Sync all dts files with upstream kernel Bring all the sunxi dts files (and update existing ones) from mripard/sunxi/dt-for-4.1 (which will be merged into upstream master any day now). This is necessary so that we can move all sunxi boards over to the driver model. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-04-15 17:03:49 +00:00
sun7i-a20-bananapi.dtb \
sunxi: Sync dts files with upstream kernel Sync dts files with the current (Aug 18th 2016) state of Maxime's linux/sunxi/for-next repo. Note this commit also updates configs/MSI_Primo81_defconfig, adding: "# CONFIG_REQUIRE_SERIAL_CONSOLE is not set", this is necessary because the tablet does not have a reachable uart so the dts sync drops its serial0 alias. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-08-18 18:51:12 +00:00
sun7i-a20-bananapi-m1-plus.dtb \
sunxi: dts: Sync all dts files with upstream kernel Bring all the sunxi dts files (and update existing ones) from mripard/sunxi/dt-for-4.1 (which will be merged into upstream master any day now). This is necessary so that we can move all sunxi boards over to the driver model. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-04-15 17:03:49 +00:00
sun7i-a20-bananapro.dtb \
sun7i-a20-cubieboard2.dtb \
sun7i-a20-cubietruck.dtb \
ARM: dts: sun7i: Sync from Linux v5.18-rc1 Copy the devicetree source for the A20 SoC and all existing boards verbatim from the Linux v5.18-rc1 tag. This commit also adds the following new board devicetrees: - sun7i-a20-haoyu-marsboard.dts - sun7i-a20-linutronix-testbox-v2.dts - sun7i-a20-olinuxino-lime-emmc.dts This update includes changes to the USB PHY detection GPIO properties which are needed to convert that driver to use the DM GPIO framework. Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: fix Mele M5 U-Boot only DT] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-04-27 20:31:23 +00:00
sun7i-a20-haoyu-marsboard.dtb \
sunxi: dts: Sync all dts files with upstream kernel Bring all the sunxi dts files (and update existing ones) from mripard/sunxi/dt-for-4.1 (which will be merged into upstream master any day now). This is necessary so that we can move all sunxi boards over to the driver model. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-04-15 17:03:49 +00:00
sun7i-a20-hummingbird.dtb \
sun7i-a20-i12-tvbox.dtb \
sunxi: Sync dts files with the upstream kernel Sync dts files with the upstream kernel including changes queued for 4.6: https://git.kernel.org/cgit/linux/kernel/git/mripard/linux.git/commit/?h=sunxi/dt-for-4.6 Note this adds a number of new unused board dts files. I've asked the authors of the kernel commits adding these to submit a matching defconfig to u-boot. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-03-14 16:37:09 +00:00
sun7i-a20-icnova-swac.dtb \
sun7i-a20-itead-ibox.dtb \
sunxi: Add support for the Lamobo R1 board The lamobo-r1 board, sometimes called the BPI-R1 but not labelled as such on the PCB, is meant as a A20 based router board. As such the board comes with a built-in switch chip giving it 5 gigabit ethernet ports, and it has a large empty area on the pcb with mounting holes which will fit a 2.5 inch harddisk. To complete its networking features it has a Realtek RTL8192CU for WiFi 802.11 b/g/n. The dts file is identical to the one submitted upstream. Signed-off-by: Jelle de Jong <jelledejong@powercraft.nl> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-10-18 14:34:13 +00:00
sun7i-a20-lamobo-r1.dtb \
ARM: dts: sun7i: Sync from Linux v5.18-rc1 Copy the devicetree source for the A20 SoC and all existing boards verbatim from the Linux v5.18-rc1 tag. This commit also adds the following new board devicetrees: - sun7i-a20-haoyu-marsboard.dts - sun7i-a20-linutronix-testbox-v2.dts - sun7i-a20-olinuxino-lime-emmc.dts This update includes changes to the USB PHY detection GPIO properties which are needed to convert that driver to use the DM GPIO framework. Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: fix Mele M5 U-Boot only DT] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-04-27 20:31:23 +00:00
sun7i-a20-linutronix-testbox-v2.dtb \
sunxi: dts: Sync all dts files with upstream kernel Bring all the sunxi dts files (and update existing ones) from mripard/sunxi/dt-for-4.1 (which will be merged into upstream master any day now). This is necessary so that we can move all sunxi boards over to the driver model. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-04-15 17:03:49 +00:00
sun7i-a20-m3.dtb \
sunxi: dts: Add minimal dts files for board which lack a dts sofar u-boot has support for a number of boards for which a dts file still needs to be written, add minimal dts files for these boards so that we can switch them over to driver-model / fdt. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-23 15:04:19 +00:00
sun7i-a20-m5.dtb \
sun7i-a20-mk808c.dtb \
sunxi: Add support for the Olimex A20 EVB Signed-off-by: Marcus Cooper <codekipper@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-08-26 18:38:33 +00:00
sun7i-a20-olimex-som-evb.dtb \
sunxi: Add A20-SOM204-EVB board This is new System-On-Module platform with universal dimm socket for easy insertation. The EVB board is designed to be universal with future modules. Base features of A20-SOM204 board includes: * 1GB DDR3 RAM * AXP209 PMU * KSZ9031 Gigabit PHY * AT24C16 EEPROM * Status LED * LCD connector * GPIO connector There will be variants with the following options: * Second LAN8710A Megabit PHY * 16MB SPI Flash memory * eMMC card * ATECC508 crypto device The EVB board has: * Debug UART * MicroSD card connector * USB-OTG connector * Two USB host * RTL8723BS WiFi/BT combo * IrDA transceiver/receiver * HDMI connector * VGA connector * Megabit ethernet transceiver * Gigabit ethernet transceiver * SATA connector * CAN driver * CSI camera * MIC and HP connectors * PCIe x4 connector * USB3 connector * Two UEXT connectors * Two user LEDs Some of the features are multiplexed and cannot be used the same time: CAN and Megabit PHY. Others are not usable with A20 SoC: PCIe and USB3. This patch adds defconfig and dts files for this board. The dts is same with mainline kernel, except some nodes are removed to make file compatible with existing dtsi file. Signed-off-by: Stefan Mavrodiev <stefan@olimex.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-02-02 13:56:18 +00:00
sun7i-a20-olimex-som204-evb.dtb \
sunxi: Add A20-SOM204-EVB-eMMC board A20-SOM204 board has option with onboard 16GB eMMC. The chip is wired to MMC2 slot. This patch adds defconfig and dts files for this board. The dts is same with mainline kernel. Signed-off-by: Stefan Mavrodiev <stefan@olimex.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-02-02 13:56:33 +00:00
sun7i-a20-olimex-som204-evb-emmc.dtb \
sunxi: dts: Sync all dts files with upstream kernel Bring all the sunxi dts files (and update existing ones) from mripard/sunxi/dt-for-4.1 (which will be merged into upstream master any day now). This is necessary so that we can move all sunxi boards over to the driver model. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-04-15 17:03:49 +00:00
sun7i-a20-olinuxino-lime.dtb \
ARM: dts: sun7i: Sync from Linux v5.18-rc1 Copy the devicetree source for the A20 SoC and all existing boards verbatim from the Linux v5.18-rc1 tag. This commit also adds the following new board devicetrees: - sun7i-a20-haoyu-marsboard.dts - sun7i-a20-linutronix-testbox-v2.dts - sun7i-a20-olinuxino-lime-emmc.dts This update includes changes to the USB PHY detection GPIO properties which are needed to convert that driver to use the DM GPIO framework. Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: fix Mele M5 U-Boot only DT] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-04-27 20:31:23 +00:00
sun7i-a20-olinuxino-lime-emmc.dtb \
sunxi: dts: Sync all dts files with upstream kernel Bring all the sunxi dts files (and update existing ones) from mripard/sunxi/dt-for-4.1 (which will be merged into upstream master any day now). This is necessary so that we can move all sunxi boards over to the driver model. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-04-15 17:03:49 +00:00
sun7i-a20-olinuxino-lime2.dtb \
sunxi: Sync dts files with upstream kernel Sync dts files with the current (Aug 18th 2016) state of Maxime's linux/sunxi/for-next repo. Note this commit also updates configs/MSI_Primo81_defconfig, adding: "# CONFIG_REQUIRE_SERIAL_CONSOLE is not set", this is necessary because the tablet does not have a reachable uart so the dts sync drops its serial0 alias. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-08-18 18:51:12 +00:00
sun7i-a20-olinuxino-lime2-emmc.dtb \
sunxi: dts: Sync all dts files with upstream kernel Bring all the sunxi dts files (and update existing ones) from mripard/sunxi/dt-for-4.1 (which will be merged into upstream master any day now). This is necessary so that we can move all sunxi boards over to the driver model. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-04-15 17:03:49 +00:00
sun7i-a20-olinuxino-micro.dtb \
ARM: fix arch/arm/dts/Makefile Since commit 27cb7300ffda ("Ensure device tree DTS is compiled"), build succeeds irrespective of the correctness of Makefile. In fact, you can compile any defconfig without adding any entry in arch/*/dts/Makefile. As a result, a lot of wrong code have been merged unnoticed. I am going to revert that commit, and lots of hidden issues have come to light: [1] Typos armada-3720-uDPU.dts, sun8i-a83t-tbs-a711.dts use the extension ".dts" instead of ".dtb" [2] DTB is associated to undefined CONFIG option For example, mx6sllevk_defconfig defines CONFIG_MX6SLL, but associates its device tree to CONFIG_MX6SL, which is undefined. [3] Lots of entries are missing Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Chris Packham <judge.packham@gmail.com> [trini: add imx6ul pico dtbs] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-03-14 05:58:33 +00:00
sun7i-a20-olinuxino-micro-emmc.dtb \
sunxi: dts: Sync all dts files with upstream kernel Bring all the sunxi dts files (and update existing ones) from mripard/sunxi/dt-for-4.1 (which will be merged into upstream master any day now). This is necessary so that we can move all sunxi boards over to the driver model. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-04-15 17:03:49 +00:00
sun7i-a20-orangepi.dtb \
sun7i-a20-orangepi-mini.dtb \
sun7i-a20-pcduino3.dtb \
sun7i-a20-pcduino3-nano.dtb \
sunxi: dts: Add dts files which have been submitted but not yet merged upstream We need dts files for all boards we support, so bring in a few unmerged ones, these will be replaced with the upstream merged versions the next time we sync dts files. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-04-23 12:27:01 +00:00
sun7i-a20-primo73.dtb \
sunxi: dts: Add minimal dts files for board which lack a dts sofar u-boot has support for a number of boards for which a dts file still needs to be written, add minimal dts files for these boards so that we can switch them over to driver-model / fdt. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-23 15:04:19 +00:00
sun7i-a20-wexler-tab7200.dtb \
sun7i-a20-wits-pro-a20-dkt.dtb \
sun7i-a20-yones-toptech-bd1078.dtb
sunxi: dts: Sync all dts files with upstream kernel Bring all the sunxi dts files (and update existing ones) from mripard/sunxi/dt-for-4.1 (which will be merged into upstream master any day now). This is necessary so that we can move all sunxi boards over to the driver model. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-04-15 17:03:49 +00:00
dtb-$(CONFIG_MACH_SUN8I_A23) += \
sunxi: Sync dts files with the linux kernel Copy over all the latest dts changes from mripard/sunxi/dt-for-4.2 , this gives us a proper dtsi file for the A33 rather then abusing sun8i-a23.dtsi for this. And this replaces our minimal (dummy) sun7i-a20-mk808c and sun8i-a33-astar-mid756 dts files with proper ones. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-06-02 13:53:40 +00:00
sun8i-a23-evb.dtb \
sunxi: Add support for gt90h-v4 tablets The gt90h is a pcb found in generic 9" tablets with an A23 soc, 1G RAM and 8G nand, rtl8723as usb wifi, 1 micro usb port and 1 micro sd slot. The pmic setup on this board is somewhat special, dcdc2 MUST be set to 1.1V instead of the usual 1.2V otherwise the board is very unstable. aldo1 is used to power the micro sd slot, dldo1 is used for wifi. This commit adds a defconfig + dts (as submitted to the kernel) for the gt90h-v4 pcb. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-08-14 14:13:03 +00:00
sun8i-a23-gt90h-v4.dtb \
sunxi: Add defconfig and dts file for inet86dz board The inet86dz board is a board used in 7" tablets from various oems. These tablets are a23 based 7" tablets featuring a 1024x600 LCD, 512MB RAM, 4G NAND, rtl8188etv usb wifi, gsl1680 touchschreen, micro-sd slot, 3.5mm headphone jack and a micro-usb otg connector which doubles as charging port. The dts file this commit adds is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-06-12 17:44:42 +00:00
sun8i-a23-inet86dz.dtb \
ARM: dts: sunxi: A13/A31/A23/A33: Sync from Linux v5.18-rc1 Copy the devicetree source for the A10s/A13/GR8, A31(s), and A23/A33/R16 SoCs and all existing boards from the Linux v5.18-rc1 tag. These changes are combined into one commit due to interdependencies: - The unit addresses were removed from bitbanged I2C buses, which drives a Kconfig default change. This affects sun5i-a13-utoo-p66.dts and sun6i-a31-colombus.dts. - The pinctrl nodes were renamed, including some used by the shared header sunxi-reference-design-tablet.dtsi. To maintain ABI compatibility with existing LTS kernels, one change moving some IP blocks to the r_intc interrupt controller is excluded. This effectively reverts Linux commits 994e5818392c and 9fdef3c3d8c2. This commit renames the file sun8i-r16-nintendo-nes-classic-edition.dts to sun8i-r16-nintendo-nes-classic.dts to match the Linux tree. This commit also adds the following new board devicetrees: - sun5i-a13-licheepi-one.dts - sun5i-a13-pocketbook-touch-lux-3.dts - sun5i-gr8-evb.dts - sun8i-a23-ippo-q8h-v1.2.dts - sun8i-a23-ippo-q8h-v5.dts - sun8i-a33-et-q8-v1.6.dts - sun8i-a33-ippo-q8h-v1.2.dts - sun8i-r16-nintendo-super-nes-classic.dts As with the other SoCs, updates of note are conversion of GPIO pull-up from pinconf to GPIO flags and renaming the detection GPIO properties in the USB PHY nodes. Signed-off-by: Samuel Holland <samuel@sholland.org>
2022-04-27 20:31:24 +00:00
sun8i-a23-ippo-q8h-v1.2.dtb \
sun8i-a23-ippo-q8h-v5.dtb \
sunxi: Add defconfig and dts file for Polaroid MID2407PXE03 tablet The Polaroid MID2407PXE03 is an a23 based 7" tablet based on a M86_MB V2.0 PCB, featuring a 800x480 LCD, 512MB RAM, 4G NAND, esp8089 wifi, gsl1680 touchschreen, micro-sd slot, 3.5mm headphone jack and a micro-usb otg connector which doubles as charging port. The dts file is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-06-11 13:19:38 +00:00
sun8i-a23-polaroid-mid2407pxe03.dtb \
sunxi: Add defconfig and dts for the Polaroid MID2809PXE4 tablet The Polaroid MID2809PXE4 is a 9" tablet which is clearly marked Polaroid MID2809PXE4 on the back. It features a 9" 16:9 800x480 LCD, A23 Soc, 1GB RAM, 8GB NAND, gsl3670 touchscreen and esp8089 wifi. The dts file is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-03-14 16:35:12 +00:00
sun8i-a23-polaroid-mid2809pxe04.dtb \
sunxi: Add generic defconfigs for A23 Q8 tablets with 800x480 LCD The 7" Q8 tablet enclosure is used for a ton of slightly different cheap chinese tablets. There are some differences in which accelerometer / wifi is used, but other then that these are all the same from a u-boot / kernel pov. When we get to adding accelerometer support the plan is to add some kind of autodetection and mangle the dt accordingly (likely using the new quirks mechanism). For now this is a non issue as we do not yet have accelerometer support, and in the future, some sort of auto-detect is the way to go as we cannot expect users to exactly know what is inside their tablet. The dts files this commit adds are identical to the ones submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-09-29 09:48:01 +00:00
sun8i-a23-q8-tablet.dtb
sunxi: dts: Add minimal dts files for board which lack a dts sofar u-boot has support for a number of boards for which a dts file still needs to be written, add minimal dts files for these boards so that we can switch them over to driver-model / fdt. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-23 15:04:19 +00:00
dtb-$(CONFIG_MACH_SUN8I_A33) += \
ARM: dts: sunxi: A13/A31/A23/A33: Sync from Linux v5.18-rc1 Copy the devicetree source for the A10s/A13/GR8, A31(s), and A23/A33/R16 SoCs and all existing boards from the Linux v5.18-rc1 tag. These changes are combined into one commit due to interdependencies: - The unit addresses were removed from bitbanged I2C buses, which drives a Kconfig default change. This affects sun5i-a13-utoo-p66.dts and sun6i-a31-colombus.dts. - The pinctrl nodes were renamed, including some used by the shared header sunxi-reference-design-tablet.dtsi. To maintain ABI compatibility with existing LTS kernels, one change moving some IP blocks to the r_intc interrupt controller is excluded. This effectively reverts Linux commits 994e5818392c and 9fdef3c3d8c2. This commit renames the file sun8i-r16-nintendo-nes-classic-edition.dts to sun8i-r16-nintendo-nes-classic.dts to match the Linux tree. This commit also adds the following new board devicetrees: - sun5i-a13-licheepi-one.dts - sun5i-a13-pocketbook-touch-lux-3.dts - sun5i-gr8-evb.dts - sun8i-a23-ippo-q8h-v1.2.dts - sun8i-a23-ippo-q8h-v5.dts - sun8i-a33-et-q8-v1.6.dts - sun8i-a33-ippo-q8h-v1.2.dts - sun8i-r16-nintendo-super-nes-classic.dts As with the other SoCs, updates of note are conversion of GPIO pull-up from pinconf to GPIO flags and renaming the detection GPIO properties in the USB PHY nodes. Signed-off-by: Samuel Holland <samuel@sholland.org>
2022-04-27 20:31:24 +00:00
sun8i-a33-et-q8-v1.6.dtb \
sunxi: Add a proper dts file for the ga10h a33 based tablet Add and use a proper dts for the ga10h a33 based tablet, as submitted upstream. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-06-02 14:18:44 +00:00
sun8i-a33-ga10h-v1.1.dtb \
sunxi: add proper device tree for iNet D978 rev2 boards Add a proper dts for the iNet D978 rev2 based A33 tablets. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-08-27 14:16:12 +00:00
sun8i-a33-inet-d978-rev2.dtb \
ARM: dts: sunxi: A13/A31/A23/A33: Sync from Linux v5.18-rc1 Copy the devicetree source for the A10s/A13/GR8, A31(s), and A23/A33/R16 SoCs and all existing boards from the Linux v5.18-rc1 tag. These changes are combined into one commit due to interdependencies: - The unit addresses were removed from bitbanged I2C buses, which drives a Kconfig default change. This affects sun5i-a13-utoo-p66.dts and sun6i-a31-colombus.dts. - The pinctrl nodes were renamed, including some used by the shared header sunxi-reference-design-tablet.dtsi. To maintain ABI compatibility with existing LTS kernels, one change moving some IP blocks to the r_intc interrupt controller is excluded. This effectively reverts Linux commits 994e5818392c and 9fdef3c3d8c2. This commit renames the file sun8i-r16-nintendo-nes-classic-edition.dts to sun8i-r16-nintendo-nes-classic.dts to match the Linux tree. This commit also adds the following new board devicetrees: - sun5i-a13-licheepi-one.dts - sun5i-a13-pocketbook-touch-lux-3.dts - sun5i-gr8-evb.dts - sun8i-a23-ippo-q8h-v1.2.dts - sun8i-a23-ippo-q8h-v5.dts - sun8i-a33-et-q8-v1.6.dts - sun8i-a33-ippo-q8h-v1.2.dts - sun8i-r16-nintendo-super-nes-classic.dts As with the other SoCs, updates of note are conversion of GPIO pull-up from pinconf to GPIO flags and renaming the detection GPIO properties in the USB PHY nodes. Signed-off-by: Samuel Holland <samuel@sholland.org>
2022-04-27 20:31:24 +00:00
sun8i-a33-ippo-q8h-v1.2.dtb \
sunxi: Add support for A33-OLinuXino board A33-OLinuXino is A33 development board designed by Olimex LTD. It has AXP223 PMU, 1GB DRAM, a micro SD card, one USB-OTG connector, headphone and mic jacks, connector for LiPo battery and optional 4GB NAND Flash. It has two 40-pin headers. One for LCD panel, and one for additional modules. Also there is CSI/DSI connector. The dts files are identical to the ones submitted to the upstream kernel. Signed-off-by: Stefan Mavrodiev <stefan.mavrodiev@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-09-02 12:21:37 +00:00
sun8i-a33-olinuxino.dtb \
sunxi: Add generic defconfigs for A33 Q8 tablets with 1024x600 / 800x480 LCD The 7" Q8 tablet enclosure is used for a ton of slightly different cheap chinese tablets. There are some differences in which accelerometer / wifi is used, but other then that these are all the same from a u-boot / kernel pov. When we get to adding accelerometer support the plan is to add some kind of autodetection and mangle the dt accordingly (likely using the new quirks mechanism). For now this is a non issue as we do not yet have accelerometer support, and in the future, some sort of auto-detect is the way to go as we cannot expect users to exactly know what is inside their tablet. The dts[i] files this commit adds are identical to the ones submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-09-20 23:46:49 +00:00
sun8i-a33-q8-tablet.dtb \
sunxi: Add defconfig and DTS file for Allwinner R16 EVB (Parrot) The Parrot Board is an evaluation board with an Allwinner R16 (assumed to be close to an Allwinner A33), 4GB of eMMC, 512MB of RAM, USB host and OTG, a WiFi/Bluetooth combo chip, a micro SD Card reader, 2 controllable buttons, an LVDS port with separated backlight and capacitive touch panel ports, an audio/microphone jack, a camera CSI port, 2 sets of 22 GPIOs and an accelerometer. The DTS file is identical to the one submitted to the upstream kernel. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-06-24 12:33:35 +00:00
sun8i-a33-sinlinx-sina33.dtb \
sunxi: Add support for the Banana Pi M2-Magic The Banana Pi M2-Magic is a small board with an Allwinner A33, an eMMC, a wifi chip and some pin headers. Enable support for it. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-04-20 11:16:18 +00:00
sun8i-r16-bananapi-m2m.dtb \
ARM: dts: sunxi: A13/A31/A23/A33: Sync from Linux v5.18-rc1 Copy the devicetree source for the A10s/A13/GR8, A31(s), and A23/A33/R16 SoCs and all existing boards from the Linux v5.18-rc1 tag. These changes are combined into one commit due to interdependencies: - The unit addresses were removed from bitbanged I2C buses, which drives a Kconfig default change. This affects sun5i-a13-utoo-p66.dts and sun6i-a31-colombus.dts. - The pinctrl nodes were renamed, including some used by the shared header sunxi-reference-design-tablet.dtsi. To maintain ABI compatibility with existing LTS kernels, one change moving some IP blocks to the r_intc interrupt controller is excluded. This effectively reverts Linux commits 994e5818392c and 9fdef3c3d8c2. This commit renames the file sun8i-r16-nintendo-nes-classic-edition.dts to sun8i-r16-nintendo-nes-classic.dts to match the Linux tree. This commit also adds the following new board devicetrees: - sun5i-a13-licheepi-one.dts - sun5i-a13-pocketbook-touch-lux-3.dts - sun5i-gr8-evb.dts - sun8i-a23-ippo-q8h-v1.2.dts - sun8i-a23-ippo-q8h-v5.dts - sun8i-a33-et-q8-v1.6.dts - sun8i-a33-ippo-q8h-v1.2.dts - sun8i-r16-nintendo-super-nes-classic.dts As with the other SoCs, updates of note are conversion of GPIO pull-up from pinconf to GPIO flags and renaming the detection GPIO properties in the USB PHY nodes. Signed-off-by: Samuel Holland <samuel@sholland.org>
2022-04-27 20:31:24 +00:00
sun8i-r16-nintendo-nes-classic.dtb \
sun8i-r16-nintendo-super-nes-classic.dtb \
sunxi: Add defconfig and DTS file for Allwinner R16 EVB (Parrot) The Parrot Board is an evaluation board with an Allwinner R16 (assumed to be close to an Allwinner A33), 4GB of eMMC, 512MB of RAM, USB host and OTG, a WiFi/Bluetooth combo chip, a micro SD Card reader, 2 controllable buttons, an LVDS port with separated backlight and capacitive touch panel ports, an audio/microphone jack, a camera CSI port, 2 sets of 22 GPIOs and an accelerometer. The DTS file is identical to the one submitted to the upstream kernel. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-06-24 12:33:35 +00:00
sun8i-r16-parrot.dtb
sunxi: Add suport for A83T HomletV2 Board by Allwinner Add dts and defconfig for h8homletv2 board. H8Homlet Proto v2.0 Board is A83T Dev Board by Allwinner. It has UART, ethernet, USB, HDMI, etc ports on it. A83T patches are tested on this board. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-11-28 17:07:27 +00:00
dtb-$(CONFIG_MACH_SUN8I_A83T) += \
sunxi: Add suport for A83T based Banana-pi M3 Board Add dts and defconfig for Banana-pi M3 board. It has 2G LPDDR3, UART, ethernet, USB, HDMI, USB Sata, MIPI DSI, mic, AP6212 Wifi, etc on it. It is paired with AXP813 PMIC which is almost same as AXP818. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> [hdegoede@redhat.com: rename to Sinovoip_BPI_M3_defconfig/sun8i-a83t-sinovoip-bpi-m3.dts] Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-01-11 17:21:00 +00:00
sun8i-a83t-allwinner-h8homlet-v2.dtb \
sunxi: rename Bananapi M3 dts file name The upstream (Linux) device tree file for the Bananapi M3 follows the convention of using the well known brand name, instead of the vendor name, for naming. The file was recently added to upstream in commit 359b5a1e1c2d ("ARM: sun8i: a83t: Add device tree for Sinovoip Bananapi BPI-M3") Rename the device tree file in U-boot to match. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-09-22 07:26:27 +00:00
sun8i-a83t-bananapi-m3.dtb \
sunxi: Add the TBS A711 tablet The TBS Tablet sports an LVDS display, an eMMC, an external SD, USB devices and USB OTG. Reviewed-by: Jagan Teki <jagan@openedev.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-12-07 16:20:08 +00:00
sun8i-a83t-cubietruck-plus.dtb \
ARM: fix arch/arm/dts/Makefile Since commit 27cb7300ffda ("Ensure device tree DTS is compiled"), build succeeds irrespective of the correctness of Makefile. In fact, you can compile any defconfig without adding any entry in arch/*/dts/Makefile. As a result, a lot of wrong code have been merged unnoticed. I am going to revert that commit, and lots of hidden issues have come to light: [1] Typos armada-3720-uDPU.dts, sun8i-a83t-tbs-a711.dts use the extension ".dts" instead of ".dtb" [2] DTB is associated to undefined CONFIG option For example, mx6sllevk_defconfig defines CONFIG_MX6SLL, but associates its device tree to CONFIG_MX6SL, which is undefined. [3] Lots of entries are missing Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Chris Packham <judge.packham@gmail.com> [trini: add imx6ul pico dtbs] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-03-14 05:58:33 +00:00
sun8i-a83t-tbs-a711.dtb
sunxi: Add H3 dts[i] files These files are based on the current latest upstream kernel work. The bus_gates bindings may still change, but for u-boot that does not matter as we do not (yet) use any clock info from devicetree for sunxi u-boot. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-11-20 15:03:56 +00:00
dtb-$(CONFIG_MACH_SUN8I_H3) += \
sunxi: add support for Banana Pi M2 Zero board Banana Pi M2 Zero is a board by Sinovoip with Allwinner H2+ SoC, 16-bit 512MiB DDR3 memory, a MicroSD slot, two MicroUSB ports (one OTG and one powering-only) and a miniHDMI port. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Jun Nie <jun.nie@linaro.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> [jagan: Fixed board MAINTAINERS file] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-10-27 05:11:00 +00:00
sun8i-h2-plus-bananapi-m2-zero.dtb \
sunxi: Add Libre Computer Board ALL-H3-CC H2+ ver. This patch adds a device tree file for the H2+ version of the Libre Computer Board ALL-H3-CC. It is the same board first introduced in commit afe27544125e ("sunxi: Add support for Libre Computer Board ALL-H3-CC H3 ver."), with the H3 SoC replaced with the H2+ SoC, and has only two 2Gb DDR3 chips instead of four. The device tree utilizes the common board design file for ALL-H3-CC, providing just the model strings and SoC specifics. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-04-28 05:36:02 +00:00
sun8i-h2-plus-libretech-all-h3-cc.dtb \
sun8i: h2: Add initial Orange Pi R1 support Orange Pi R1 is an open-source single-board computer using the Allwinner H2+ SOC. H2+ Orange Pi R1 has - Quad-core Cortex-A7 - 256MB DDR3 - micrSD slot - 128MBit SPI Nor flash - Debug TTL UART - 100MBit/s Ethernet (H2+) - 100MBit/s Ethernet (RTL8152B) - Wifi (RTL8189ETV) - USB 2.0 OTG + power supply This board is very similar to the Orange Pi Zero. The device tree file is copied from the Linux kernel 4.17. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-06-09 16:33:37 +00:00
sun8i-h2-plus-orangepi-r1.dtb \
sunxi: add proper device tree for Orange Pi Zero boards Add a proper device tree file for Orange Pi Zero boards from Xunlong, which come with a Allwinner H2+ SoC (similar to H3). Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Reviewed-by: Jagan Teki <jagan@openedev.com>
2016-12-16 14:35:01 +00:00
sun8i-h2-plus-orangepi-zero.dtb \
sunxi: Sync dts files with upstream kernel Sync dts files with the current (Aug 18th 2016) state of Maxime's linux/sunxi/for-next repo. Note this commit also updates configs/MSI_Primo81_defconfig, adding: "# CONFIG_REQUIRE_SERIAL_CONSOLE is not set", this is necessary because the tablet does not have a reachable uart so the dts sync drops its serial0 alias. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-08-18 18:51:12 +00:00
sun8i-h3-bananapi-m2-plus.dtb \
sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108 Sync the device tree files and device tree header files from upstream Linux kernel, as of 2020-01-08. The commit synced to in the sunxi repo 98d25b0b266d Merge branch 'sunxi/dt-for-5.6' into sunxi/for-next which is also part of next-20200108. Changes brought in include: - cleanup of pinmux node names - addition of Security ID, MBUS, CSI, crypto engine, video codec, pmu, and thermal sensor device nodes for both SoCs - addition of deinterlacing engine device node on H3 - cleanup of RTC device node and addition of its clocks - various board cleanups and improvements - removal of pinmux node for GPIO lines - cpufreq / DVFS - HDMI output - UART-based Bluetooth - audio codec - USB ports - new boards Most of the changes don't concern U-boot. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-12 15:36:13 +00:00
sun8i-h3-bananapi-m2-plus-v1.2.dtb \
sun8i: h3: Add support for the Beelink-x2 STB The Beelink X2 is an STB based on the Allwinner H3 SoC with a uSD slot, 2 USB ports( 1 * USB-2 Host, 1 USB OTG), a 10/100M ethernet port using the SoC's integrated PHY, Wifi via an sdio wifi chip, HDMI, an IR receiver, a dual colour LED and an optical S/PDIF connector. Linux commit details about the sun8i-h3-beelink-x2.dts sync: "ARM: dts: sun8i: h3: Add ethernet0 alias to Beelink X2" (sha1: cc4bddade114b696ab27c1a77cfc7040151306da) Signed-off-by: Marcus Cooper <codekipper@gmail.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-06-02 06:38:40 +00:00
sun8i-h3-beelink-x2.dtb \
sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108 Sync the device tree files and device tree header files from upstream Linux kernel, as of 2020-01-08. The commit synced to in the sunxi repo 98d25b0b266d Merge branch 'sunxi/dt-for-5.6' into sunxi/for-next which is also part of next-20200108. Changes brought in include: - cleanup of pinmux node names - addition of Security ID, MBUS, CSI, crypto engine, video codec, pmu, and thermal sensor device nodes for both SoCs - addition of deinterlacing engine device node on H3 - cleanup of RTC device node and addition of its clocks - various board cleanups and improvements - removal of pinmux node for GPIO lines - cpufreq / DVFS - HDMI output - UART-based Bluetooth - audio codec - USB ports - new boards Most of the changes don't concern U-boot. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-12 15:36:13 +00:00
sun8i-h3-emlid-neutis-n5h3-devboard.dtb \
sunxi: Add support for Libre Computer Board ALL-H3-CC H3 ver. The Libre Computer Board ALL-H3-CC from Libre Technology is a Raspberry Pi B+ form factor single board computer based on the Allwinner H3 SoC. The board has 1GB DDR3 SDRAM, provided by 4 2Gb chips. The mounting holes and connectors are in the exact same position as on the Raspberry Pi B+. Raspberry Pi B+ like peripherals supported on this board include: - Power input through micro-USB connector (without USB OTG) - Native 100 Mbps ethernet using the internal PHY, as opposed to USB-based on the RPi - 4x USB 2.0 host ports, directly connected to the SoC, as opposed to being connected through a USB 2.0 hub on the RPi - TV and audio output on a 3.5mm TRRS jack - HDMI output - Micro-SD card slot - Standard RPi B+ GPIO header, with the standard peripherals routed to the same pins. * 5V, 3.3V power, and ground * I2C0 on the H3 is routed to I2C1 pins on the RPi header * I2C1 on the H3 is routed to I2C0 pins on the RPi header * UART1 on the H3 is routed to UART0 pins on the RPi header * SPI0 on the H3 is routed to SPI0 pins on the RPi header, with GPIO pin PA17 replacing the missing Chip Select 1 * I2S1 on the H3 is routed to PCM pins on the RPi header - Additional peripherals from the H3 are available on different pins. These include I2S0, JTAG, PWM1, SPDIF, SPI1, and UART3 In addition, there are a number of new features: - Console UART header - Consumer IR receiver - Camera interface (not compatible with RPi) - Onboard microphone - eMMC expansion module port - Heatsink mounting holes This patch adds defconfig and dts files for this board. The dts file is the same as the one submitted for inclusion in Linux, with some minor revisions to match the dtsi file and old EMAC bindings in U-boot. Since the OTG controller is wired to a USB host port, and the H3 has proper USB hosts to handle host mode, the MUSB driver is not enabled. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2017-12-07 13:00:45 +00:00
sun8i-h3-libretech-all-h3-cc.dtb \
sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108 Sync the device tree files and device tree header files from upstream Linux kernel, as of 2020-01-08. The commit synced to in the sunxi repo 98d25b0b266d Merge branch 'sunxi/dt-for-5.6' into sunxi/for-next which is also part of next-20200108. Changes brought in include: - cleanup of pinmux node names - addition of Security ID, MBUS, CSI, crypto engine, video codec, pmu, and thermal sensor device nodes for both SoCs - addition of deinterlacing engine device node on H3 - cleanup of RTC device node and addition of its clocks - various board cleanups and improvements - removal of pinmux node for GPIO lines - cpufreq / DVFS - HDMI output - UART-based Bluetooth - audio codec - USB ports - new boards Most of the changes don't concern U-boot. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-12 15:36:13 +00:00
sun8i-h3-mapleboard-mp130.dtb \
sun8i-h3-nanopi-duo2.dtb \
sunxi: Sort dts Makefile entries for H3 The dts Makefile entries for the H3 are not ordered correctly. Move the Nano Pi entries before the Orange Pi so they are. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-04-28 05:36:04 +00:00
sun8i-h3-nanopi-m1.dtb \
sun8i-h3-nanopi-m1-plus.dtb \
sun8i-h3-nanopi-neo.dtb \
sun8i-h3-nanopi-neo-air.dtb \
ARM: dts: sunxi: H2+/H3/H5: Sync from Linux v5.18-rc1 Copy the devicetree source for the H2+/H3/H5 SoCs and all existing boards from the Linux v5.18-rc1 tag. To maintain ABI compatibility with existing LTS kernels, one change moving some IP blocks to the r_intc interrupt controller is excluded. This effectively reverts Linux commits 994e5818392c and 9fdef3c3d8c2. This commit also adds the following new board devicetree: - sun8i-h3-nanopi-r1.dts This update should not impact any existing U-Boot functionality. Signed-off-by: Samuel Holland <samuel@sholland.org>
2022-04-27 20:31:27 +00:00
sun8i-h3-nanopi-r1.dtb \
sunxi: Add defconfig and dts for Orange Pi 2 SBC The Orange Pi 2 is a SBC based on the Allwinner H3 SoC with a uSD slot, 4 USB ports connected via a USB-2 hub, a 10/100M ethernet port using the SoC's integrated PHY, Wifi via a RTL8189ETV sdio wifi chip, USB OTG, HDMI, a TRRS headphone jack for stereo out and composite out, a microphone, an IR receiver, a CSI connector, 2 LEDs, a 3 pin UART header and a 40-pin GPIO header. The added dts file is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-03-23 08:59:23 +00:00
sun8i-h3-orangepi-2.dtb \
sunxi: Add defconfig and dts file for the Orange Pi Lite SBC The Orange Pi Lite SBC is a small H3 based SBC, with 512MB RAM, micro-sd slot, HDMI out, 2 USB-A connectors, 1 micro-USB connector, sdio attached rtl8189ftv wifi and an ir receiver. The dts file is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-07-09 20:20:00 +00:00
sun8i-h3-orangepi-lite.dtb \
sunxi: Add defconfig and dts file for Orange Pi One SBC The Orange Pi One SBC, is a stripped down version of the popular Orange Pi PC. The one is a H3 based SBC, with 512M of RAM, micro-sd slot, 1 host usb, 1 otg usb, hdmi and 100Mbit ethernet. The dts is identical to the dts submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-04-09 13:02:24 +00:00
sun8i-h3-orangepi-one.dtb \
sunxi: Add H3 dts[i] files These files are based on the current latest upstream kernel work. The bus_gates bindings may still change, but for u-boot that does not matter as we do not (yet) use any clock info from devicetree for sunxi u-boot. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-11-20 15:03:56 +00:00
sun8i-h3-orangepi-pc.dtb \
sunxi: Add defconfig and dts file for the Orange Pi PC Plus SBC There is a new Orange Pi PC *Plus* version available now, this is an extended version of the regular Orange Pi PC with sdio wifi and an eMMC. The upstream kernel devs have decided that they want a separate dts for the PC Plus rather then sharing a single dts between the regular PC and the PC Plus. So add a new orangepi_pc_plus_defconfig to match. The added dts file matches the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-07-26 15:47:16 +00:00
sun8i-h3-orangepi-pc-plus.dtb \
sunxi: Add defconfig and dts file for the Orange Pi Plus2E SBC The Orange Pi Plus2E is an extended version of the Orange Pi Pc Plus, with 2G RAM and an external gbit ethernet phy. The dts file is identical to the one submitted to the upstream kernel, except that it has the pending patch to enable the ethernet controller squashed in, as u-boot already has sun8i-emac support. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-09-03 09:42:31 +00:00
sun8i-h3-orangepi-plus.dtb \
sun8i: h3: Support H3 variant of Orange Pi Zero Plus 2 Orangepi Zero Plus 2 is an open-source single-board computer, available in two Allwinner SOC variants, H3 and H5. We add support for H3 variant here, as the H5 is already supported. H3 Orangepi Zero Plus 2 has: - Quad-core Cortex-A7 - 512MB DDR3 - microSD slot and 8GB eMMC - Debug TTL UART - HDMI - Wifi + BT - OTG + power supply Sync dts from linux v5.2 commit: "ARM: dts: sunxi: h3/h5: Remove stale pinctrl-names entry" (sha1: 75f9a058838be9880afd75c4cb14e1bf4fe34a0b) Commit: "ARM: dts: sun8i: h3: Refactor the pinctrl node names" (sha1: a4dc791974e568a15f7f37131729b1a6912f4811) has been avoided as it breaks U-Boot build. Signed-off-by: Diego Rondini <diego.rondini@kynetics.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-11-19 13:43:33 +00:00
sun8i-h3-orangepi-plus2e.dtb \
sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108 Sync the device tree files and device tree header files from upstream Linux kernel, as of 2020-01-08. The commit synced to in the sunxi repo 98d25b0b266d Merge branch 'sunxi/dt-for-5.6' into sunxi/for-next which is also part of next-20200108. Changes brought in include: - cleanup of pinmux node names - addition of Security ID, MBUS, CSI, crypto engine, video codec, pmu, and thermal sensor device nodes for both SoCs - addition of deinterlacing engine device node on H3 - cleanup of RTC device node and addition of its clocks - various board cleanups and improvements - removal of pinmux node for GPIO lines - cpufreq / DVFS - HDMI output - UART-based Bluetooth - audio codec - USB ports - new boards Most of the changes don't concern U-boot. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-12 15:36:13 +00:00
sun8i-h3-orangepi-zero-plus2.dtb \
sunxi: h3: Add initial ZeroPi support ZeroPi is a new board of high performance with low cost designed by FriendlyElec., using the Allwinner H3 SOC. ZeroPi features - Allwinner H3, Quad-core Cortex-A7@1.2GHz - 256MB/512MB DDR3 RAM - microsd slot - 10/100/1000Mbps Ethernet - Debug Serial Port - DC 5V/2A power-supply Signed-off-by: Yu-Tung Chang <mtwget@gmail.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-06-19 08:16:45 +00:00
sun8i-h3-rervision-dvk.dtb \
sun8i-h3-zeropi.dtb
sunxi: Add support for Bananapi M2 Ultra The Bananapi M2 Ultra is the first publicly available development board featuring the R40 SoC. This patch add barebone dtsi/dts files for the R40 and Bananapi M2 Ultra, as well as a defconfig for it. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-12-02 08:12:32 +00:00
dtb-$(CONFIG_MACH_SUN8I_R40) += \
board: sunxi: sun8i-v40: Add Bananapi M2 Berry support Banana Pi BPI-M2 Berry is a quad-core mini single board computer built with Allwinner V40 SoC. It features - Quad Core ARM Cortex A7 CPU V40 - 1GB of RAM . - microSD/SATA port.. - onboard WiFi and BT - 4 USB A 2.0 ports - 1 USB OTG port - 1 HDMI port - 1 audio jack - DC power port Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-04-27 12:03:42 +00:00
sun8i-r40-bananapi-m2-ultra.dtb \
ARM: dts: sun8i: R40/T3: Sync from Linux v5.18-rc1 Copy the devicetree for the R40/T3 SoC verbatim from the Linux v5.18-rc1 tag. None of the existing boards had any devicetree updates. This commit adds the following new board devicetrees: - sun8i-r40-oka40i-c.dts - sun8i-t3-cqa3t-bv3.dts Signed-off-by: Samuel Holland <samuel@sholland.org>
2022-04-27 20:31:29 +00:00
sun8i-r40-oka40i-c.dtb \
sun8i-t3-cqa3t-bv3.dtb \
board: sunxi: sun8i-v40: Add Bananapi M2 Berry support Banana Pi BPI-M2 Berry is a quad-core mini single board computer built with Allwinner V40 SoC. It features - Quad Core ARM Cortex A7 CPU V40 - 1GB of RAM . - microSD/SATA port.. - onboard WiFi and BT - 4 USB A 2.0 ports - 1 USB OTG port - 1 HDMI port - 1 audio jack - DC power port Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-04-27 12:03:42 +00:00
sun8i-v40-bananapi-m2-berry.dtb
sunxi: add support for Lichee Pi Zero Lichee Pi Zero is a development board with a V3s SoC, which features 64MiB DRAM co-packaged within the SoC, a TF slot, a SPI NOR slot (not soldered in production batch), a 40-pin RGB LCD connector and some extra pins available as 2.54mm pins or stamp holes. Add support for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-04-08 07:30:14 +00:00
dtb-$(CONFIG_MACH_SUN8I_V3S) += \
ARM: dts: sun8i: V3/V3s/S3: Sync from Linux v5.18-rc1 Copy the devicetree source for the V3(s)/S3 SoCs and all existing boards verbatim from the Linux v5.18-rc1 tag. This commit also adds the following new board devicetrees: - sun8i-s3-elimo-initium.dts - sun8i-v3-sl631-imx179.dts This update should not impact any existing U-Boot functionality. Signed-off-by: Samuel Holland <samuel@sholland.org>
2022-04-27 20:31:28 +00:00
sun8i-s3-elimo-initium.dtb \
sunxi: add PineCube board PineCube is an IP camera development kit released by Pine64. It comes with the following compoents: - A mainboard with Sochip S3 SoC, a 16MByte SPI Flash, AXP209 PMIC, a power-only microUSB connector, a USB Type-A connector, a 10/100Mbps Ethernet port and FPC connectors for camera and daughter board. - An OV5640-based camera module which is connected to the parallel CSI bus of the mainboard. - A daughterboard with several buttons, a SD slot, some IR LEDs, a microphone and a speaker connector. As the device tree is synchronized in a previous commit, just add it to Makefile, create a new MAINTAINER item and provide a defconfig. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2020-11-18 10:27:00 +00:00
sun8i-s3-pinecube.dtb \
ARM: dts: sun8i: V3/V3s/S3: Sync from Linux v5.18-rc1 Copy the devicetree source for the V3(s)/S3 SoCs and all existing boards verbatim from the Linux v5.18-rc1 tag. This commit also adds the following new board devicetrees: - sun8i-s3-elimo-initium.dts - sun8i-v3-sl631-imx179.dts This update should not impact any existing U-Boot functionality. Signed-off-by: Samuel Holland <samuel@sholland.org>
2022-04-27 20:31:28 +00:00
sun8i-v3-sl631-imx179.dtb \
sunxi: add support for Lichee Pi Zero Lichee Pi Zero is a development board with a V3s SoC, which features 64MiB DRAM co-packaged within the SoC, a TF slot, a SPI NOR slot (not soldered in production batch), a 40-pin RGB LCD connector and some extra pins available as 2.54mm pins or stamp holes. Add support for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-04-08 07:30:14 +00:00
sun8i-v3s-licheepi-zero.dtb
sunxi: Add OrangePi PC 2 initial support The OrangePi PC 2 is a typical SBC with the 64-bit Allwinner H5 SoC. Add a (64-bit only) defconfig defining the required options to build the U-Boot proper. Create a new .dts file for it by including the (32-bit) H3 SoC .dtsi and changing the differing components accordingly. This is a preliminary device tree mostly for U-Boot's own sake, it is expected to be updated once the official DT gets accepted upstream. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> [squash the commits, update the commit message] Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-02-16 01:20:29 +00:00
dtb-$(CONFIG_MACH_SUN50I_H5) += \
ARM: fix arch/arm/dts/Makefile Since commit 27cb7300ffda ("Ensure device tree DTS is compiled"), build succeeds irrespective of the correctness of Makefile. In fact, you can compile any defconfig without adding any entry in arch/*/dts/Makefile. As a result, a lot of wrong code have been merged unnoticed. I am going to revert that commit, and lots of hidden issues have come to light: [1] Typos armada-3720-uDPU.dts, sun8i-a83t-tbs-a711.dts use the extension ".dts" instead of ".dtb" [2] DTB is associated to undefined CONFIG option For example, mx6sllevk_defconfig defines CONFIG_MX6SLL, but associates its device tree to CONFIG_MX6SL, which is undefined. [3] Lots of entries are missing Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Chris Packham <judge.packham@gmail.com> [trini: add imx6ul pico dtbs] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-03-14 05:58:33 +00:00
sun50i-h5-bananapi-m2-plus.dtb \
board: sun50i-h5: Add Emlid Neutis N5 support Emlid Neutis N5 is a SoM based on Allwinner H5, has a WiFi & BT module, DDR3 RAM and eMMC. - add neutis-devboard target to dtb makefile - add dtsi file for Neutis N5 needs - add config file for Neutis N5 Dev board Signed-off-by: Aleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> [jagan: update proper commit head] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-10-05 12:55:59 +00:00
sun50i-h5-emlid-neutis-n5-devboard.dtb \
sunxi: Add Libre Computer Board ALL-H3-CC H5 ver. This patch adds a device tree file for the H5 version of the Libre Computer Board ALL-H3-CC. It is the same board first introduced in commit afe27544125e ("sunxi: Add support for Libre Computer Board ALL-H3-CC H3 ver."), with the H3 SoC replaced with the H5 SoC, and has 4Gb DDR3 chips instead of 2Gb ones. The device tree utilizes the common board design file for ALL-H3-CC, providing just the model strings and SoC specifics. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-04-28 05:36:03 +00:00
sun50i-h5-libretech-all-h3-cc.dtb \
sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108 Sync the device tree files and device tree header files from upstream Linux kernel, as of 2020-01-08. The commit synced to in the sunxi repo 98d25b0b266d Merge branch 'sunxi/dt-for-5.6' into sunxi/for-next which is also part of next-20200108. Changes brought in include: - cleanup of pinmux node names - addition of Security ID, MBUS, CSI, crypto engine, video codec, pmu, and thermal sensor device nodes for both SoCs - addition of deinterlacing engine device node on H3 - cleanup of RTC device node and addition of its clocks - various board cleanups and improvements - removal of pinmux node for GPIO lines - cpufreq / DVFS - HDMI output - UART-based Bluetooth - audio codec - USB ports - new boards Most of the changes don't concern U-boot. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-12 15:36:13 +00:00
sun50i-h5-libretech-all-h3-it.dtb \
sun50i-h5-libretech-all-h5-cc.dtb \
sun50i: h5: Add initial NanoPi NEO2 support NanoPi NEO2 is designed and developed by FriendlyElec using the Allwinner 64-bit H5 SOC. NanoPi Neo2 key features - Allwinner H5, Quad-core 64-bit Cortex-A53 - 512MB DDR3 RAM - microSD slot - 10/100/1000M Ethernet - Serial Debug Port - 5V 2A DC MicroUSB power-supply Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2017-05-30 17:41:15 +00:00
sun50i-h5-nanopi-neo2.dtb \
sun50i: h5: Add NanoPi Neo Plus2 DT initial support Add initial DT for NanoPi NEO Plus2 by FriendlyARM - Allwinner quad core H5 Cortex A53 with an ARM Mali-450MP GPU - 1 GB DDR3 RAM - 8GB eMMC flash (Samsung KLM8G1WEPD-B031) - micro SD card slot - Gigabit Ethernet (external RTL8211E-VB-CG chip) - 802.11 b/g/n WiFi, Bluetooth 4.0 (Ampak AP6212A module) - 2x USB 2.0 host ports Signed-off-by: Antony Antony <antony@phenome.org> Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-11-21 09:11:53 +00:00
sun50i-h5-nanopi-neo-plus2.dtb \
sunxi: Add support for FriendlyARM NanoPi R1S H5 This adds support for the NanoPi R1S H5 board. Allwinner H5 SoC 512MB DDR3 RAM 10/100/1000M Ethernet x 2 RTL8189ETV WiFi 802.11b/g/n USB 2.0 host port (A) MicroSD Slot Reset button Serial Debug Port WAN - LAN - SYS LED The dts file is taken from Linux 5.14 tag. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-10 13:36:57 +00:00
sun50i-h5-nanopi-r1s-h5.dtb \
sun50i: h5: Add initial Orange Pi Zero Plus support Orange Pi Zero Plus is an open-source single-board computer using the Allwinner H5 SOC. H5 Orangepi Zero Plus has - Quad-core Cortex-A53 - 512MB DDR3 - micrSD slot - 16MBit SPI Nor flash - Debug TTL UART - 1GBit/s Ethernet (RTL8211E) - Wifi (RTL8189FTV) - USB 2.0 Host - USB 2.0 OTG + power supply The device tree file is copied from the Linux kernel 4.17. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-06-09 16:34:46 +00:00
sun50i-h5-orangepi-zero-plus.dtb \
sun50i: h5: Add initial Orangepi Prime support Orangepi Prime is an open-source single-board computer using the Allwinner h5 SOC. H5 Orangepi Prime has - Quad-core Cortex-A53 - 2GB DDR3 - Debug TTL UART - 1000M/100M Ethernet RJ45 - Three USB 2.0 - HDMI - Audio and MIC - Wifi + BT - IR receiver - HDMI - Wifi + BT Boot from MMC: ------------- U-Boot SPL 2017.05-00662-ga3f4c05-dirty (May 25 2017 - 13:30:14) DRAM: 2048 MiB Trying to boot from MMC1 NOTICE: BL3-1: Running on H5 (1718) in SRAM A2 (@0x44000) NOTICE: Configuring SPC Controller NOTICE: BL3-1: v1.0(debug):aa75c8d NOTICE: BL3-1: Built : 18:28:27, May 24 2017 INFO: BL3-1: Initializing runtime services INFO: BL3-1: Preparing for EL3 exit to normal world INFO: BL3-1: Next image address: 0x4a000000, SPSR: 0x3c9 U-Boot 2017.05-00662-ga3f4c05-dirty (May 25 2017 - 13:30:14 +0000) Allwinner Technology CPU: Allwinner H5 (SUN50I) Model: OrangePi Prime DRAM: 2 GiB MMC: SUNXI SD/MMC: 0 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: phy interface7 eth0: ethernet@1c30000 starting USB... USB0: USB EHCI 1.00 USB1: USB OHCI 1.0 scanning bus 0 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Hit any key to stop autoboot: 0 Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-05-24 19:18:08 +00:00
sun50i-h5-orangepi-pc2.dtb \
sun50i: h5: Add initial Orangepi Zero Plus 2 support Orangepi Zero Plus 2 is an open-source single-board computer using the Allwinner h5 SOC. H5 Orangepi Zero Plus 2 has - Quad-core Cortex-A53 - 512MB DDR3 - micrSD slot and 8GB eMMC - Debug TTL UART - HDMI - Wifi + BT - OTG+power supply Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2017-05-25 16:00:09 +00:00
sun50i-h5-orangepi-prime.dtb \
sun50i-h5-orangepi-zero-plus2.dtb
sunxi: add support for Pine H64 board Pine H64 is a SBC with Allwinner H6 SoC produced by Pine64. It features 1GiB/2GiB/4GiB(3GiB usable) DRAM, two USB 2.0 ports, one USB 3.0 port and a mPCIE slot. Add support for it. The device tree is from Linux next-20180720. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2018-07-21 08:20:32 +00:00
dtb-$(CONFIG_MACH_SUN50I_H6) += \
arm: dts: h6: Add Beelink GS1 initial support Beelink GS1 is an Allwinner H6 based TV box, which support: - Allwinner H6 Quad-core 64-bit ARM Cortex-A53 - GPU Mali-T720 - 2GB LPDDR3 RAM - 16GB eMMC - AXP805 PMIC - 1Gbps GMAC via RTL8211E - USB 2.0 and 3.0 Host - HDMI port - S/PDIF port - 5V/2A DC power supply - Wi-Fi/BT via Fn-Link 6222B-SRB (RTL8222BS) Linux commit details about the sun50i-h6-beelink-gs1.dts sync: "arm64: dts: allwinner: h6: Introduce Beelink GS1 board" (sha1: 089bee8dd119ba084dee6b17a2e1a53df4f30193) Signed-off-by: Clément Péron <peron.clem@gmail.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-12 14:15:26 +00:00
sun50i-h6-beelink-gs1.dtb \
sunxi: Add support for Orange Pi 3 dts file is taken from Linux 5.11-rc1 tag. The Bluetooth controller of this device ships with a default address, use the new CONFIG_FIXUP_BDADDR option to fix it up. Signed-off-by: Andre Heider <a.heider@gmail.com> Acked-by: Maxime Ripard <mripard@kernel.org> [Updated OrangePi 3 DT, rebase and config update] Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-01 18:29:00 +00:00
sun50i-h6-orangepi-3.dtb \
board: allwinner: sun50i-h6: Add Orangepi Lite2 support OrangePi Lite2 is Allwinner H6 based open-source SBC, which support: - Allwinner H6 Quad-core 64-bit ARM Cortex-A53 - GPU Mali-T720 - 1GB LPDDR3 RAM - AXP805 PMIC - AP6356S Wifi/BT - USB 2.0, USB 3.0 Host, OTG - HDMI port - 5V/2A DC power supply Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-11-05 07:50:40 +00:00
sun50i-h6-orangepi-lite2.dtb \
board: sun50i: h6: Add OrangePi One Plus initial support OrangePi One Plus is Allwinner H6 based open-source SBC, which support: - Allwinner H6 Quad-core 64-bit ARM Cortex-A53 - GPU Mali-T720 - 1GB LPDDR3 RAM - AXP805 PMIC - 1Gbps GMAC via RTL8211 - USB 2.0 Host, OTG - HDMI port - 5V/2A DC power supply Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-07-28 18:33:31 +00:00
sun50i-h6-orangepi-one-plus.dtb \
sunxi: Add support for Tanix TX6 This commit adds support for Tanix TX6 TV box, based on H6. It's low end H6 board, with 3 GiB of RAM, eMMC, fast ethernet, USB, IR and other peripherals. DT file is taken from Linux 5.11-rc1 release. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-01-06 17:02:57 +00:00
sun50i-h6-pine-h64.dtb \
ARM: dts: sun50i: H6: Sync from Linux v5.18-rc1 Copy the devicetree source for the H6 SoC and all existing boards from the Linux v5.18-rc1 tag. To maintain ABI compatibility with existing LTS kernels, one change moving some IP blocks to the r_intc interrupt controller is excluded. This effectively reverts Linux commits 189bef235dd3 and 73088dfee635. This commit also adds the following new board devicetrees: - sun50i-h6-pine-h64-model-b.dts - sun50i-h6-tanix-tx6-mini.dts This update should not impact any existing U-Boot functionality. Signed-off-by: Samuel Holland <samuel@sholland.org>
2022-04-27 20:31:31 +00:00
sun50i-h6-pine-h64-model-b.dtb \
sun50i-h6-tanix-tx6.dtb \
sun50i-h6-tanix-tx6-mini.dtb
sunxi: Add support for OrangePi Zero2 OrangePi Zero2 is SBC based on Allwinner H616 with 1 GiB of RAM, SD card support, gigabit ethernet, micro HDMI, WIFI, Bluetooth and 1 USB 2.0 port. It also has two GPIO headers which allows further peripherals to be used. The devicetree file is taken from v3 of the OrangePi Zero2 Linux submission [1], which it's not yet merged. [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2021-January/632084.html Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-01-11 20:11:53 +00:00
dtb-$(CONFIG_MACH_SUN50I_H616) += \
sunxi: dts: arm64: update devicetree files Update the devicetree files from the Linux kernel, version v6.0-rc4. This is covering the 64-bit SoCs, from arch/arm64/boot/dts/allwinner. This avoids the not backwards-compatible r_intc binding change, to allow older kernels to boot, but the other nodes are updated. Not much change here, the vast majority is actually cosmetic: node names and using symbolic names for the the RTC clocks. Some A64 boards gain some audio nodes. The H616 DTs are now switched to the version finally merged into the kernel, which brings some changes, but none affecting U-Boot. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2022-09-10 23:04:41 +00:00
sun50i-h616-orangepi-zero2.dtb \
sun50i-h616-x96-mate.dtb
sunxi: Add Pine64+ support The Pine64+ is a system based on the Allwinner A64 SoC. It is capable of running AArch64 code and thus is the first of its kind for the sunxi target. This patch adds a defconfig and device tree chunks for it. Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> [agraf: Change patch description] Signed-off-by: Alexander Graf <agraf@suse.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-03-29 15:29:11 +00:00
dtb-$(CONFIG_MACH_SUN50I) += \
board: sun50i: Add Amarula A64-Relic initial support Amarula A64-Relic is A64 based IoT device, which support - Allwinner A64 Cortex-A53 - Mali-400MP2 GPU - AXP803 PMIC - 1GB DDR3 RAM - 8GB eMMC - AP6330 Wifi/BLE - MIPI-DSI - CSI: OV5640 sensor - USB OTG - 12V DC power supply Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-05-28 11:04:43 +00:00
sun50i-a64-amarula-relic.dtb \
sun50i: a64: Add initial Banana Pi M64 support BPI-M64 is a 64-bit quad-core mini single board computer using the Allwinner A64 SOC. BPI-M64 features - 1.2 Ghz Quad-Core ARM Cortex A53 - 2GB DDR3 SDRAM with 733MHz - MicroSD/eMMC(8GB) - 10/100/1000Mbps ethernet (Realtek RTL8211E/D) - Wifi + BT - IR receiver - Audio In/Out - Video In/Out - 5V 2A DC power-supply For dts file, Sync with Linux commit 4879b7ae("Merge tag 'dmaengine-4.12-rc1'"). Boot from MMC: ------------- U-Boot SPL 2017.05-00667-g85dd258-dirty (May 29 2017 - 13:07:31) DRAM: 2048 MiB Trying to boot from MMC1 NOTICE: BL3-1: Running on A64/H64 (1689) in SRAM A2 (@0x44000) NOTICE: Configuring SPC Controller NOTICE: BL3-1: v1.0(debug):aa75c8d NOTICE: BL3-1: Built : 18:28:27, May 24 2017 NOTICE: Configuring AXP PMIC NOTICE: PMIC: setup successful INFO: BL3-1: Initializing runtime services INFO: BL3-1: Preparing for EL3 exit to normal world INFO: BL3-1: Next image address: 0x4a000000, SPSR: 0x3c9 U-Boot 2017.05-00667-g85dd258-dirty (May 29 2017 - 13:07:31 +0000) Allwinner Technology CPU: Allwinner A64 (SUN50I) Model: BananaPi-M64 DRAM: 2 GiB MMC: SUNXI SD/MMC: 0, SUNXI SD/MMC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: No ethernet found. starting USB... No controllers found Hit any key to stop autoboot: 0 Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-05-25 20:16:00 +00:00
sun50i-a64-bananapi-m64.dtb \
sun50i: a64: Add initial NanoPi A64 support NanoPi A64 is a new board of high performance with low cost designed by FriendlyElec., using the Allwinner A64 SOC. Nanopi A64 features - Allwinner A64, 64-bit Quad-core Cortex-A53@648MHz to 1.152GHz, DVFS - 1GB DDR3 RAM - MicroSD - Gigabit Ethernet (RTL8211E) - Wi-Fi 802.11b/g/n - IR receiver - Audio In/Out - Video In/Out - Serial Debug Port - microUSB 5V 2A DC power-supply Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2017-06-09 13:01:17 +00:00
sun50i-a64-nanopi-a64.dtb \
sun50i: a64: Add Oceanic 5205 5inMFD initial support Oceanic 5205 5inMFD is a 5 inch Multi function display baseboard designed to mount SoPine SOM. Key features: - Allwinner A64 Cortex-A53 - Mali-400MP2 GPU - AXP803 PMIC - 2GB DDR3 RAM - SD Slot - SPI-NOR flash - EMAC, RTL8211E - MCP2515 CAN - 4-lane, MIPI-DSI panel - Goodix 911 CTP - USB Host - 12V DC power supply Linux commit details about the sun50i-a64-oceanic-5205-5inmfd.dts sync: "arm64: allwinner: a64: Add Oceanic 5205 5inMFD initial support" (sha1: 00f7980a3bd53d12abc34f68146a8eed0e894248) Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-03-06 16:54:48 +00:00
sun50i-a64-oceanic-5205-5inmfd.dtb \
sun50i: a64: Add A64-OLinuXino initial support OLimex A64-OLinuXino is an open-source hardware board using the Allwinner A64 SOC. OLimex A64-OLinuXino has - A64 Quad-core Cortex-A53 64bit - 1GB or 2GB RAM DDR3L @ 672Mhz - microSD slot and 4/8/16GB eMMC - Debug TTL UART - HDMI - LCD - IR receiver - 5V DC power supply Tested-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-08-12 12:48:58 +00:00
sun50i-a64-olinuxino.dtb \
arm64: dts: sun50i: Add support for A64 OLinuXino (with eMMC) A64 OLinuXino board from Olimex has three variants with onboard eMMC: A64-OLinuXino-1Ge16GW, A64-OLinuXino-1Ge4GW and A64-OLinuXino-2Ge8G-IND. In addition, there are two variants without eMMC. One without eMMC and one with SPI flash. This suggests the need for separate device tree for the three eMMC variants. The Linux kernel upstream has chosen to create and use a separate device tree for the eMMC variants instead of adding eMMC support existing device tree. These changes to Linux kernel are queued for Linux 5.4. commit <02bb66b347ff8115f53948f86b884e008ba385b9> ("arm64: dts: allwinner: a64: Add A64 OlinuXino board (with eMMC)") This patch has been tested on A64-OLinuXino-1Ge16GW and is based on Linux device-tree and a64-olinuxino_defconfig. Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org> [jagan: updated linux-next commit details] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-09-10 18:43:40 +00:00
sun50i-a64-olinuxino-emmc.dtb \
sun50i: a64: Add initial Orangepi Win/WinPlus support Orangepi Win/WinPlus is an open-source single-board computer using the Allwinner A64 SOC. A64 Orangepi Win/WinPlus has - A64 Quad-core Cortex-A53 64bit - 1GB(Win)/2GB(Win Plus) DDR3 SDRAM - Debug TTL UART - Four USB 2.0 - HDMI - LCD - Audio and MIC - Wifi + BT - IR receiver - 5V DC power supply Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2017-06-13 09:44:42 +00:00
sun50i-a64-orangepi-win.dtb \
ARM: fix arch/arm/dts/Makefile Since commit 27cb7300ffda ("Ensure device tree DTS is compiled"), build succeeds irrespective of the correctness of Makefile. In fact, you can compile any defconfig without adding any entry in arch/*/dts/Makefile. As a result, a lot of wrong code have been merged unnoticed. I am going to revert that commit, and lots of hidden issues have come to light: [1] Typos armada-3720-uDPU.dts, sun8i-a83t-tbs-a711.dts use the extension ".dts" instead of ".dtb" [2] DTB is associated to undefined CONFIG option For example, mx6sllevk_defconfig defines CONFIG_MX6SLL, but associates its device tree to CONFIG_MX6SL, which is undefined. [3] Lots of entries are missing Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Chris Packham <judge.packham@gmail.com> [trini: add imx6ul pico dtbs] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-03-14 05:58:33 +00:00
sun50i-a64-pine64-lts.dtb \
arm64: Pine64: update FDT files The originally committed .dts files for the Pine64 were from an early proof-of-concept version and should have never been committed upstream. Replace them with much more mature versions, which also use a different naming scheme. Please note that at this point there is at least one binding which has not been agreed upon, so this is subject to change. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-05-04 21:15:33 +00:00
sun50i-a64-pine64-plus.dtb \
sunxi: DT: A64: add proper SoPine baseboard device tree When the defconfig for the SoPine baseboard was added, there wasn't any proper DT for the board yet, so we used the Pine64 DT as a placeholder. Copy the DT file(s) meanwhile added in Linux over to U-Boot, and use them in our defconfig. This is as of v4.18-rc3, exactly Linux commit: commit 7d556bfc49adddf2beb0d16c91945c3b8b783282 Author: Jagan Teki <jagannadh.teki@gmail.com> Date: Mon Dec 4 10:23:07 2017 +0530 arm64: allwinner: a64-sopine: Fix to use dcdc1 regulator instead of vcc3v3 Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2018-07-04 13:16:39 +00:00
sun50i-a64-pine64.dtb \
sunxi: DT: add support for Pinebook Pinebook is a laptop produced by Pine64, with USB-connected keyboard, USB-connected touchpad and an eDP LCD panel connected via a RGB-eDP bridge from Analogix. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Tested-by: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Vagrant Cascadian <vagrant@debian.org> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-11-06 04:24:31 +00:00
sun50i-a64-pinebook.dtb \
sunxi: DT: A64: update device tree files Import updated device trees from Linux tag v5.9. This picks up new hardware (PinePhone, PineTab); and it drops the U-Boot specific DTSI files for the Pinebook and the Teres-I, since the ANX6345 bridge is now supported upstream. A couple of headers needed updates for recently-added hardware support. Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-10-24 15:21:55 +00:00
sun50i-a64-pinephone-1.0.dtb \
sun50i-a64-pinephone-1.1.dtb \
sun50i-a64-pinephone-1.2.dtb \
sun50i-a64-pinetab.dtb \
sun50i: a64: Add Olimex A64-Teres-I board initial support Olimex A64-Teres-I board is a mainboard (the only one so far) for Olimex Teres-I DIY laptop kit. Key features: - Allwinner A64 Cortex-A53 - Mali-400MP2 GPU - AXP803 PMIC - 2GB DDR3 RAM - MicroSD Slot - 16GB eMMC Flash - eDP LCD display - HDMI - USB Host - Battery management - 5V DC power supply - Certified Open Source Hardware (OSHW) Works: - i2C - MMC/SD - PWM backlight Known broken: - Internal keyboard (seems to be because the keyboard firmware loads a bootloader first, and then disconnects bootloader and connect real keyboard). External ones connected to the USB port work fine. This patch enables support for the A64-Teres-I board to u-boot, including enabling screen backlight (lacking from Linux device-tree). Linux commit details about the sun50i-a64-teres-i.dts sync: "arm64: dts: allwinner: a64: Rename uart0_pins_a label to uart0_pb_pins" (sha1: d91ebb95b96c8840932dc3a10c9f243712555467) Cosmetic warnings regarding whitespace and placement of SPDX notice for dts file was ignored. config and .dtsi file are adapted from pinebook files. Tested-by: Jonas Smedegaard <dr@jones.dk> Signed-off-by: Jonas Smedegaard <dr@jones.dk> Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> [jagan: move board entry in MAINTAINERS file at proper position] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-20 10:24:16 +00:00
sun50i-a64-sopine-baseboard.dtb \
sun50i-a64-teres-i.dtb
sunxi: dts: Sync all dts files with upstream kernel Bring all the sunxi dts files (and update existing ones) from mripard/sunxi/dt-for-4.1 (which will be merged into upstream master any day now). This is necessary so that we can move all sunxi boards over to the driver model. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-04-15 17:03:49 +00:00
dtb-$(CONFIG_MACH_SUN9I) += \
sun9i-a80-optimus.dtb \
arm: sunxi: Add Sunchip CX-A99 initial support The Sunchip CX-A99 is a board used in some media players. It features: An Allwinner A80 ARM SoC (4 * Cortex-A7 + 4 * Cortex-A15 cores) 2 GiB or 4 GiB DDR3 DRAM AXP808 PMIC 16 GB or 32 GB eMMC SDIO Wifi/Bluetooth/FM module SD card slot 1 USB 3.0 connector 2 USB 2.0 connectors SATA connector UART connector (internally) for serial console Ethernet connector (10/100/1000 Mbit/s) HDMI connector Composite video and analog audio connector S/PDIF connector IR remote control receiver This patch adds a defconfig for the board. The DRAM settings are as found in the vendor sys_config.fex file. It has a preliminary device tree for use until a device tree is accepted upstream, after which it can be replaced by the upstream version. Signed-off-by: Rask Ingemann Lambertsen <rask@formelder.dk> [squash commits, and edited new meanful commit message] Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-02-25 13:21:54 +00:00
sun9i-a80-cubieboard4.dtb \
sun9i-a80-cx-a99.dtb
sunxi: dts: Sync all dts files with upstream kernel Bring all the sunxi dts files (and update existing ones) from mripard/sunxi/dt-for-4.1 (which will be merged into upstream master any day now). This is necessary so that we can move all sunxi boards over to the driver model. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-04-15 17:03:49 +00:00
colibri_vf: synchronise device tree with linux Synchronise device tree with linux v5.19-rc5. Please note that this also means that instead of the previous "generic" U-Boot specific carrier board agnostic device tree we are now using the regular one for the Colibri Evaluation (carrier) board V3 (e.g. vf610-colibri-eval-v3.dtb rather than the previous vf610-colibri.dtb). Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-07-21 13:27:38 +00:00
dtb-$(CONFIG_VF610) += vf610-colibri-eval-v3.dtb \
arm: pcm052: Add device tree file's - Add device tree files for Phytec phyCORE-Vybrid Board. - Enable lpuart support for Phytec phyCORE-Vybrid Board. - Use UART1 for stdout. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-27 05:01:49 +00:00
vf610-twr.dtb \
ARM: DTS: Update pcm052 based dts files (bk4r1/pcm052) This commit provides update and renames the bk4r1.dts to vf610-bk4r1.dts file with more on SoC HW description. The pcm052.dts has been renamed to vf610-pcm052.dts as well. Moreover, a new vf610-pcm052.drsi file has been introduced to reuse the common code between devices based on Phytec's pcm052 modules. Ported from Linux kernel - v4.20 (tag) Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-02-13 21:46:48 +00:00
vf610-pcm052.dtb \
vf610-bk4r1.dtb
vf610: dts: Add device tree support Add device tree files for Freescale Vybrid platform and Toradex Colibri VF50, VF61 modules. Device tree files are taken from upstream Kernel. Removed the stuff which are not used/supported yet in U-Boot. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
2015-06-01 13:07:21 +00:00
mx23evk: Convert to driver model Make the conversion to driver model as it is mandatory. Successfully tested booting Linux from the SD card. Dropped splash screen support as this needs to be properly converted to DM and tested. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2021-02-18 23:32:29 +00:00
dtb-$(CONFIG_MX23) += \
imx23-evk.dtb
mx23_olinuxino: enable device tree Add the dts file for the Olimex Olinuxino from the linux kernel, and enable its use in this machine's defconfig. Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2021-03-22 15:31:28 +00:00
dtb-$(CONFIG_TARGET_MX23_OLINUXINO) += \
imx23-olinuxino.dtb
imx: Add support for i.MX28 based XEA board This patch introduces support for i.MX28 based XEA board. This board supports DM/DTS in U-Boot proper as well as DM aware drivers in SPL (u-boot.sb) by using OF_PLATDATA. More detailed information regarding usage of it can be found in ./board/liebherr/xea/README file. U-Boot SPL 2019.10-rc1-00233-g6aa549f05c (Aug 12 2019 - 09:23:36 +0200) Trying to boot from MMC1 MMC0: Command 8 timeout (status 0xf0344020) mmc_load_image_raw_sector: mmc block read error U-Boot 2019.10-rc1-00233-g6aa549f05c (Aug 12 2019 - 09:23:36 +0200) CPU: Freescale i.MX28 rev1.2 at 454 MHz BOOT: SSP SPI #3, master, 3V3 NOR Model: Liebherr (LWE) XEA i.MX28 Board DRAM: 128 MiB MMC: MXS MMC: 0 Loading Environment from SPI Flash... SF: Detected n25q128a13 with page size 256 Bytes, erase size 64 KiB, total 16 MiB OK In: serial Out: serial Err: serial Net: Warning: ethernet@800f0000 (eth0) using random MAC address - ce:e1:9e:46:f3:a2 eth0: ethernet@800f0000 Hit any key to stop autoboot: 0 Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-12-08 21:06:56 +00:00
dtb-$(CONFIG_MX28) += \
mx28evk: Convert to driver model Make the conversion to driver model as it is mandatory. Successfully tested booting Linux from the SD card. Dropped support for networking and splash screen as these need to be properly converted to DM and tested. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2021-02-18 02:39:28 +00:00
imx28-evk.dtb \
imx: Add support for i.MX28 based XEA board This patch introduces support for i.MX28 based XEA board. This board supports DM/DTS in U-Boot proper as well as DM aware drivers in SPL (u-boot.sb) by using OF_PLATDATA. More detailed information regarding usage of it can be found in ./board/liebherr/xea/README file. U-Boot SPL 2019.10-rc1-00233-g6aa549f05c (Aug 12 2019 - 09:23:36 +0200) Trying to boot from MMC1 MMC0: Command 8 timeout (status 0xf0344020) mmc_load_image_raw_sector: mmc block read error U-Boot 2019.10-rc1-00233-g6aa549f05c (Aug 12 2019 - 09:23:36 +0200) CPU: Freescale i.MX28 rev1.2 at 454 MHz BOOT: SSP SPI #3, master, 3V3 NOR Model: Liebherr (LWE) XEA i.MX28 Board DRAM: 128 MiB MMC: MXS MMC: 0 Loading Environment from SPI Flash... SF: Detected n25q128a13 with page size 256 Bytes, erase size 64 KiB, total 16 MiB OK In: serial Out: serial Err: serial Net: Warning: ethernet@800f0000 (eth0) using random MAC address - ce:e1:9e:46:f3:a2 eth0: ethernet@800f0000 Hit any key to stop autoboot: 0 Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-12-08 21:06:56 +00:00
imx28-xea.dtb
mx51evk: Convert to driver model Make the conversion to driver model as it is mandatory. Tested booting the Linux kernel from the SD card. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2021-02-15 11:58:17 +00:00
dtb-$(CONFIG_MX51) += \
imx51-babbage.dtb
ARM: fix arch/arm/dts/Makefile Since commit 27cb7300ffda ("Ensure device tree DTS is compiled"), build succeeds irrespective of the correctness of Makefile. In fact, you can compile any defconfig without adding any entry in arch/*/dts/Makefile. As a result, a lot of wrong code have been merged unnoticed. I am going to revert that commit, and lots of hidden issues have come to light: [1] Typos armada-3720-uDPU.dts, sun8i-a83t-tbs-a711.dts use the extension ".dts" instead of ".dtb" [2] DTB is associated to undefined CONFIG option For example, mx6sllevk_defconfig defines CONFIG_MX6SLL, but associates its device tree to CONFIG_MX6SL, which is undefined. [3] Lots of entries are missing Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Chris Packham <judge.packham@gmail.com> [trini: add imx6ul pico dtbs] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-03-14 05:58:33 +00:00
dtb-$(CONFIG_MX53) += imx53-cx9020.dtb \
mx53loco: Convert to driver model Make the conversion to driver model as it is mandatory. Remove the SATA support for now as the i.MX53 support has not been added yet. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2021-02-14 01:49:52 +00:00
imx53-qsb.dtb \
ARM: dts: imx: m53menlo: Import M53Menlo DT from Linux Import iMX53 M53Menlo device tree from Linux next-20190607 3f310e51ceb1 . Enable DT control in full U-Boot . Add U-Boot extras into separate DTSi, the GPIO controllers need to be inited early, otherwise m53_set_clock() won't be able to detect the correct CPU clock frequency by reading the GPIO. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2019-06-09 16:46:42 +00:00
imx53-kp.dtb \
ARM: board: usbarmory: Import the usbarmory dts file Import the iMX53 based usbarmory dts files from Linux 5.12-rc1 Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Cc: Andrej Rosano <andrej@inversepath.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-04-01 21:17:05 +00:00
imx53-m53menlo.dtb \
imx53-usbarmory.dtb
ARM: fix arch/arm/dts/Makefile Since commit 27cb7300ffda ("Ensure device tree DTS is compiled"), build succeeds irrespective of the correctness of Makefile. In fact, you can compile any defconfig without adding any entry in arch/*/dts/Makefile. As a result, a lot of wrong code have been merged unnoticed. I am going to revert that commit, and lots of hidden issues have come to light: [1] Typos armada-3720-uDPU.dts, sun8i-a83t-tbs-a711.dts use the extension ".dts" instead of ".dtb" [2] DTB is associated to undefined CONFIG option For example, mx6sllevk_defconfig defines CONFIG_MX6SLL, but associates its device tree to CONFIG_MX6SL, which is undefined. [3] Lots of entries are missing Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Chris Packham <judge.packham@gmail.com> [trini: add imx6ul pico dtbs] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-03-14 05:58:33 +00:00
nitrogen6x: migrate to using device tree Migrate to using device tree required for further driver model integration. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
2019-07-29 19:15:54 +00:00
ifneq ($(CONFIG_MX6DL)$(CONFIG_MX6QDL)$(CONFIG_MX6S),)
dtb-y += \
imx6: aristainetos: add support for rev C board add support for revision C boards. This board has no longer a NAND. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-12-01 10:23:32 +00:00
imx6dl-aristainetos2c_7.dtb \
imx6: add support for aristainetos2c_cslb board variant add support for aristainetos2c_cslb board variant. Signed-off-by: Heiko Schocher <hs@denx.de>
2020-11-30 19:46:03 +00:00
imx6dl-aristainetos2c_cslb_7.dtb \
board/BuR/brppt2: initial commit This commit adds support for the brppt2 board. The board is based on the i.mx6 dual-lite SoC. Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2019-07-17 12:29:53 +00:00
imx6dl-brppt2.dtb \
arm: dts: hummingboard: add cubox/hummingboard DT (part 1 of 2) These DT files are copied from kernel v5.3 with no changes. This is part 1 of 2 commits. Included are DT files for the original Cubox-i and Hummingboard Base/Pro. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-11-10 12:38:05 +00:00
imx6dl-cubox-i.dtb \
arm: dts: hummingboard: add cubox/hummingboard DT (part 2 of 2) These DT files are copied from kernel v5.3 with no changes. This is part 2 of 2 commits. Included are DT files for SOM rev 1.5, and Hummingboard2 Gate/Edge. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-11-10 12:38:06 +00:00
imx6dl-cubox-i-emmc-som-v15.dtb \
imx6dl-cubox-i-som-v15.dtb \
ARM: dts: imx: dh-imx6: Add DHCOM iMX6 Duallite PDK2 device tree This device tree adds support for DHCOM iMX6 duallite and solo deriviates. Signed-off-by: Ludwig Zenz <lzenz@dh-electronics.com> Reviewed-by: Marek Vasut <marex@denx.de>
2019-07-02 12:49:48 +00:00
imx6dl-dhcom-pdk2.dtb \
ARM: dts: imx: Migrate iMX6QDL picoITX DTs from Linux Migrate DH picoITX device trees from Linux commit 42226c989789 (tag v5.18-rc7). No changes have been made, the DTs are exact copies. Furthermore add the DTB to dh_imx6_defconfig. Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Philip Oberfichtner <pro@denx.de>
2022-05-20 08:46:21 +00:00
imx6dl-dhcom-picoitx.dts \
imx: ventana: add Gateworks Ventana dts Add Gateworks Ventana dts/dtsi files from Linux 5.11 in preparation for conversion to driver-model. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-03-01 22:33:30 +00:00
imx6dl-gw51xx.dtb \
imx6dl-gw52xx.dtb \
imx6dl-gw53xx.dtb \
imx6dl-gw54xx.dtb \
imx6dl-gw551x.dtb \
imx6dl-gw552x.dtb \
imx6dl-gw553x.dtb \
imx6dl-gw560x.dtb \
imx6dl-gw5903.dtb \
imx6dl-gw5904.dtb \
imx6dl-gw5907.dtb \
imx6dl-gw5910.dtb \
imx6dl-gw5912.dtb \
imx6dl-gw5913.dtb \
arm: dts: hummingboard: add cubox/hummingboard DT (part 2 of 2) These DT files are copied from kernel v5.3 with no changes. This is part 2 of 2 commits. Included are DT files for SOM rev 1.5, and Hummingboard2 Gate/Edge. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-11-10 12:38:06 +00:00
imx6dl-hummingboard2.dtb \
imx6dl-hummingboard2-emmc-som-v15.dtb \
imx6dl-hummingboard2-som-v15.dtb \
arm: dts: hummingboard: add cubox/hummingboard DT (part 1 of 2) These DT files are copied from kernel v5.3 with no changes. This is part 1 of 2 commits. Included are DT files for the original Cubox-i and Hummingboard Base/Pro. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-11-10 12:38:05 +00:00
imx6dl-hummingboard.dtb \
arm: dts: hummingboard: add cubox/hummingboard DT (part 2 of 2) These DT files are copied from kernel v5.3 with no changes. This is part 2 of 2 commits. Included are DT files for SOM rev 1.5, and Hummingboard2 Gate/Edge. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-11-10 12:38:06 +00:00
imx6dl-hummingboard-emmc-som-v15.dtb \
imx6dl-hummingboard-som-v15.dtb \
arm: imx6q: Add devicetree support for Engicam i.CoreM6 Quad/Dual i.CoreM6 Quad/Dual modules are system on module solutions manufactured by Engicam with following characteristics: CPU NXP i.MX6 DQ, 800MHz RAM 1GB, 32, 64 bit, DDR3-800/1066 NAND SLC,512MB Power supply Single 5V MAX LCD RES FULLHD and more info at http://www.engicam.com/en/products/embedded/som/sodimm/i-core-m6s-dl-d-q Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-10-08 12:30:24 +00:00
imx6dl-icore.dtb \
board: i.MX6QDL: add Engicam i.CoreM6 1.5 QDL MIPI starter kit i.CoreM6 1.5 is an another i.CoreM6 QDL cpu modules which can be connected to EDIMM starter kit design with eMMC and MIPI-CSI interfaces suitable for Android and video capture application. notable features: CPU NXP i.MX6 S/DL/D/Q, Up to 4 x Cortex-A9@800MHz Memory Up to 2 GB DDR3-1066 Video Interfaces Up to 1 Parallel Up to 2 LVDS HDMI 1.4 port 8 bit CSI INPUT MIPI-CSI INPUT 1 x 10/100 Ethernet interface, 2 x USB, 1 x PCIe, 1 x I2S etc This patch adds support for Quad/Dual and DualLite/Solo SOM's on MIPI starter kit with boot from SD and eMMC. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-01-05 18:32:04 +00:00
imx6dl-icore-mipi.dtb \
arm: imx6q: Add Engicam i.CoreM6 Solo/Duallite RQS Starter Kit initial support Boot from MMC: ------------- U-Boot SPL 2016.11-rc2-g217bd8e-dirty (Nov 08 2016 - 22:56:07) Trying to boot from MMC1 U-Boot 2016.11-rc2-g217bd8e-dirty (Nov 08 2016 - 22:56:07 +0530) CPU: Freescale i.MX6DL rev1.3 at 792 MHz Reset cause: POR Model: Engicam i.CoreM6 DualLite/Solo RQS Starter Kit DRAM: 512 MiB MMC: FSL_SDHC: 0 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: CPU Net Initialization Failed No ethernet found. Hit any key to stop autoboot: 0 icorem6qdl-rqs> Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-12-13 16:56:59 +00:00
imx6dl-icore-rqs.dtb \
arm: dt: imx6qdl: add tqma6[qdl] som on mba6 mainboard The device trees for TQMa6x SOM support variations in - CPU type: imx6dl- or imx6q- - MBa6 I2C bus access: -mba6a (i2c1) or -mba6b (i2c3) (plus the respective common/module include trees) - USBH1 is directly connected to a hub - USBOTG is connected to a separate connector and can act as host/device or full OTG port. Signed-off-by: Michael Krummsdorf <michael.krummsdorf@ew.tq-group.com>
2020-04-09 13:21:37 +00:00
imx6dl-mba6a.dtb \
imx6dl-mba6b.dtb \
i.MX6: board: Add BTicino i.MX6DL Mamoj initial support Add initial support for i.MX6DL BTicino Mamoj board. Mamoh board added: - SPL - SPL_DM - SPL_OF_CONTROL - DM for U-Boot proper - OF_CONTROL for U-Boot proper - eMMC - FEC - Boot from eMMC - Boot from USB SDP Signed-off-by: Simone CIANNI <simone.cianni@bticino.it> Signed-off-by: Raffaele RECALCATI <raffaele.recalcati@bticino.it> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-05-07 05:51:34 +00:00
imx6dl-mamoj.dtb \
nitrogen6x: migrate to using device tree Migrate to using device tree required for further driver model integration. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
2019-07-29 19:15:54 +00:00
imx6dl-nitrogen6x.dtb \
pico-imx6: Add initial support Add the initial support for the pico-imx6 variants. DDR initialization is based on the TechNexion's U-Boot code. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2019-06-11 01:24:12 +00:00
imx6dl-pico.dtb \
ARM: board: udoo: Import UDOO dts files Import the i.MX6 based UDOO dts files from Linux 5.12-rc1. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-04-02 16:52:47 +00:00
imx6dl-udoo.dtb \
ARM: embestmx6boards: Import the marsboard/riotboard. dts files Import the iMX6 based marsboard and riotboard. dts files from Linux 5.12-rc1 Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-04-02 14:52:26 +00:00
imx6dl-riotboard.dtb \
mx6: dts: Keep dtb entries sorted Keep dtb entries sorted to help adding new dtbs in an organized form. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-06-12 15:34:35 +00:00
imx6dl-sabreauto.dtb \
imx6dl-sabresd.dtb \
wandboard: Fix version detection for mx6q/mx6dl revD1 The detection of the revD1 version is based on the presence of the PMIC. Currently revb1 device trees are used for mx6q/mx6dl variants, which do not have the PMIC nodes. This causes revD1 boards to be incorrectly be detected as revB1. Fix this issue by using the revd1 device trees, so that the PMIC node can be found and then the PMIC can be detected by reading its register ID. Imported the revd1 device trees from mainline kernel version 5.7-rc1. Reported-by: Heiko Schocher <hs@denx.de> Reported-by: Derek Atkins <derek@ihtfp.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Tested-by: Derek Atkins <derek@ihtfp.com> Tested-by: Heiko Schocher <hs@denx.de> Tested-by: Peter Robinson <pbrobinson@gmail.com>
2020-04-17 12:27:09 +00:00
imx6dl-wandboard-revd1.dtb \
ARM: dts: imx: Migrate iMX6QDL DRC02 DTs from Linux Migrate DH DRC02 device trees from Linux commit 42226c989789 (tag v5.18-rc7). No changes have been made, the DTs are exact copies. Furthermore add the DTB to dh_imx6_defconfig. Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Philip Oberfichtner <pro@denx.de>
2022-05-20 08:46:20 +00:00
imx6s-dhcom-drc02.dtb
nitrogen6x: migrate to using device tree Migrate to using device tree required for further driver model integration. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
2019-07-29 19:15:54 +00:00
endif
ifneq ($(CONFIG_MX6Q)$(CONFIG_MX6QDL),)
dtb-y += \
apalis_imx6: synchronise device tree with linux Synchronise device tree with linux-next 20220706. Please note that this also means that instead of the previous "generic" U-Boot specific carrier board agnostic device tree we are now using the regular one for the Apalis Evaluation (carrier) board (e.g. imx6q-apalis-eval.dtb rather than the previous imx6-apalis.dtb). Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-07-21 13:27:27 +00:00
imx6q-apalis-eval.dtb \
bosch: Add initial board support for ACC The Bosch ACC (Air Center Control) Board is based on the i.MX6D. The device tree is copied from Linux, see [1]. The only difference compared to the Linux DT is the removal of usbphynop properties. They are defined in the Linux version of imx6qdl.dtsi, but not in the u-boot version. [1] Commit 6192cf8ac082 from git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git Signed-off-by: Philip Oberfichtner <pro@denx.de>
2022-05-19 11:52:48 +00:00
imx6q-bosch-acc.dtb \
dm: imx: cm_fx6: Add device tree for cm_fx6 Add this file so we can use device-tree control for cm_fx6. It comes from linux 4.12. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-07-29 17:35:26 +00:00
imx6q-cm-fx6.dtb \
arm: dts: hummingboard: add cubox/hummingboard DT (part 1 of 2) These DT files are copied from kernel v5.3 with no changes. This is part 1 of 2 commits. Included are DT files for the original Cubox-i and Hummingboard Base/Pro. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-11-10 12:38:05 +00:00
imx6q-cubox-i.dtb \
arm: dts: hummingboard: add cubox/hummingboard DT (part 2 of 2) These DT files are copied from kernel v5.3 with no changes. This is part 2 of 2 commits. Included are DT files for SOM rev 1.5, and Hummingboard2 Gate/Edge. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-11-10 12:38:06 +00:00
imx6q-cubox-i-emmc-som-v15.dtb \
imx6q-cubox-i-som-v15.dtb \
ARM: dts: imx: dh-imx6: Add DHCOM iMX6 Duallite PDK2 device tree This device tree adds support for DHCOM iMX6 duallite and solo deriviates. Signed-off-by: Ludwig Zenz <lzenz@dh-electronics.com> Reviewed-by: Marek Vasut <marex@denx.de>
2019-07-02 12:49:48 +00:00
imx6q-dhcom-pdk2.dtb \
nitrogen6x: migrate to using device tree Migrate to using device tree required for further driver model integration. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
2019-07-29 19:15:54 +00:00
imx6q-display5.dtb \
imx: ventana: add Gateworks Ventana dts Add Gateworks Ventana dts/dtsi files from Linux 5.11 in preparation for conversion to driver-model. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-03-01 22:33:30 +00:00
imx6q-gw51xx.dtb \
imx6q-gw52xx.dtb \
imx6q-gw53xx.dtb \
imx6q-gw54xx.dtb \
imx6q-gw551x.dtb \
imx6q-gw552x.dtb \
imx6q-gw553x.dtb \
imx6q-gw560x.dtb \
imx6q-gw5903.dtb \
imx6q-gw5904.dtb \
imx6q-gw5907.dtb \
imx6q-gw5910.dtb \
imx6q-gw5912.dtb \
imx6q-gw5913.dtb \
arm: dts: hummingboard: add cubox/hummingboard DT (part 2 of 2) These DT files are copied from kernel v5.3 with no changes. This is part 2 of 2 commits. Included are DT files for SOM rev 1.5, and Hummingboard2 Gate/Edge. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-11-10 12:38:06 +00:00
imx6q-hummingboard2.dtb \
imx6q-hummingboard2-emmc-som-v15.dtb \
imx6q-hummingboard2-som-v15.dtb \
arm: dts: hummingboard: add cubox/hummingboard DT (part 1 of 2) These DT files are copied from kernel v5.3 with no changes. This is part 1 of 2 commits. Included are DT files for the original Cubox-i and Hummingboard Base/Pro. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-11-10 12:38:05 +00:00
imx6q-hummingboard.dtb \
arm: dts: hummingboard: add cubox/hummingboard DT (part 2 of 2) These DT files are copied from kernel v5.3 with no changes. This is part 2 of 2 commits. Included are DT files for SOM rev 1.5, and Hummingboard2 Gate/Edge. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-11-10 12:38:06 +00:00
imx6q-hummingboard-emmc-som-v15.dtb \
imx6q-hummingboard-som-v15.dtb \
arm: imx6ul: Add Engicam GEAM6UL Starter Kit initial support Boot Log: -------- U-Boot SPL 2016.11-rc2-00144-g922adaa-dirty (Oct 28 2016 - 18:55:30) Trying to boot from MMC1 U-Boot 2016.11-rc2-00144-g922adaa-dirty (Oct 28 2016 - 18:55:30 +0530) CPU: Freescale i.MX6UL rev1.1 528 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 105C) at 43C Reset cause: POR Model: Engicam GEAM6UL DRAM: 128 MiB MMC: FSL_SDHC: 0 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: CPU Net Initialization Failed No ethernet found. Hit any key to stop autoboot: 0 geam6ul> Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-12-13 16:56:52 +00:00
imx6q-icore.dtb \
board: i.MX6QDL: add Engicam i.CoreM6 1.5 QDL MIPI starter kit i.CoreM6 1.5 is an another i.CoreM6 QDL cpu modules which can be connected to EDIMM starter kit design with eMMC and MIPI-CSI interfaces suitable for Android and video capture application. notable features: CPU NXP i.MX6 S/DL/D/Q, Up to 4 x Cortex-A9@800MHz Memory Up to 2 GB DDR3-1066 Video Interfaces Up to 1 Parallel Up to 2 LVDS HDMI 1.4 port 8 bit CSI INPUT MIPI-CSI INPUT 1 x 10/100 Ethernet interface, 2 x USB, 1 x PCIe, 1 x I2S etc This patch adds support for Quad/Dual and DualLite/Solo SOM's on MIPI starter kit with boot from SD and eMMC. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-01-05 18:32:04 +00:00
imx6q-icore-mipi.dtb \
arm: imx6q: Add Engicam i.CoreM6 Quad/Dual RQS Starter Kit initial support Boot from MMC: ------------- U-Boot SPL 2016.11-rc2-g217bd8e-dirty (Nov 08 2016 - 22:59:44) Trying to boot from MMC1 U-Boot 2016.11-rc2-g217bd8e-dirty (Nov 08 2016 - 22:59:44 +0530) CPU: Freescale i.MX6D rev1.2 at 792 MHz Reset cause: POR Model: Engicam i.CoreM6 Quad/Dual RQS Starter Kit DRAM: 512 MiB MMC: FSL_SDHC: 0 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: CPU Net Initialization Failed No ethernet found. Hit any key to stop autoboot: 0 icorem6qdl-rqs> Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-12-13 16:56:58 +00:00
imx6q-icore-rqs.dtb \
imx: tpc70: dts: Add TPC70 board (imx6q based) device tree description This commit defines the TPC70 imx6q board with device tree description. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-10 14:11:27 +00:00
imx6q-kp.dtb \
nitrogen6x: migrate to using device tree Migrate to using device tree required for further driver model integration. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
2019-07-29 19:15:54 +00:00
imx6q-logicpd.dtb \
ARM: embestmx6boards: Import the marsboard/riotboard. dts files Import the iMX6 based marsboard and riotboard. dts files from Linux 5.12-rc1 Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-04-02 14:52:26 +00:00
imx6q-marsboard.dtb \
arm: dt: imx6qdl: add tqma6[qdl] som on mba6 mainboard The device trees for TQMa6x SOM support variations in - CPU type: imx6dl- or imx6q- - MBa6 I2C bus access: -mba6a (i2c1) or -mba6b (i2c3) (plus the respective common/module include trees) - USBH1 is directly connected to a hub - USBOTG is connected to a separate connector and can act as host/device or full OTG port. Signed-off-by: Michael Krummsdorf <michael.krummsdorf@ew.tq-group.com>
2020-04-09 13:21:37 +00:00
imx6q-mba6a.dtb \
imx6q-mba6b.dtb \
ARM: imx: Convert mccmon6 to use DM/DTS in the u-boot proper This commit converts mccmon6's u-boot proper (in a single commit to avoid build breaks) to use solely DM/DTS. The DTS description of the mccmon6 has been ported from Linux kernel (v4.20, SHA1: 8fe28cb58bcb235034b64cbbb7550a8a43fd88be) Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-15 08:28:43 +00:00
imx6q-mccmon6.dtb\
nitrogen6x: migrate to using device tree Migrate to using device tree required for further driver model integration. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
2019-07-29 19:15:54 +00:00
imx6q-nitrogen6x.dtb \
imx6q-novena.dtb \
pico-imx6: Add initial support Add the initial support for the pico-imx6 variants. DDR initialization is based on the TechNexion's U-Boot code. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2019-06-11 01:24:12 +00:00
imx6q-pico.dtb \
arm: imx6q: pcm058: Convert pcm058 to use DM with DTs Convert pcm058 support to use device trees and the driver model. Add rudimentary boot scripts to the environment, expand README. Signed-off-by: Niel Fourie <lusus@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2020-05-19 12:01:43 +00:00
imx6q-phytec-mira-rdk-nand.dtb \
ARM: board: udoo: Import UDOO dts files Import the i.MX6 based UDOO dts files from Linux 5.12-rc1. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-04-02 16:52:47 +00:00
imx6q-udoo.dtb \
arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd] Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd] to the ones from kernel v4.20 (commit 8fe28cb58bcb2). Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Acked-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-02-01 16:40:16 +00:00
imx6q-sabreauto.dtb \
nitrogen6x: migrate to using device tree Migrate to using device tree required for further driver model integration. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
2019-07-29 19:15:54 +00:00
imx6q-sabrelite.dtb \
arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd] Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd] to the ones from kernel v4.20 (commit 8fe28cb58bcb2). Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Acked-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-02-01 16:40:16 +00:00
imx6q-sabresd.dtb \
nitrogen6x: migrate to using device tree Migrate to using device tree required for further driver model integration. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
2019-07-29 19:15:54 +00:00
imx6q-tbs2910.dtb \
wandboard: Fix version detection for mx6q/mx6dl revD1 The detection of the revD1 version is based on the presence of the PMIC. Currently revb1 device trees are used for mx6q/mx6dl variants, which do not have the PMIC nodes. This causes revD1 boards to be incorrectly be detected as revB1. Fix this issue by using the revd1 device trees, so that the PMIC node can be found and then the PMIC can be detected by reading its register ID. Imported the revd1 device trees from mainline kernel version 5.7-rc1. Reported-by: Heiko Schocher <hs@denx.de> Reported-by: Derek Atkins <derek@ihtfp.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Tested-by: Derek Atkins <derek@ihtfp.com> Tested-by: Heiko Schocher <hs@denx.de> Tested-by: Peter Robinson <pbrobinson@gmail.com>
2020-04-17 12:27:09 +00:00
imx6q-wandboard-revd1.dtb \
arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd] Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd] to the ones from kernel v4.20 (commit 8fe28cb58bcb2). Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Acked-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-02-01 16:40:16 +00:00
imx6qp-sabreauto.dtb \
wandboard: Add FIT image support After the transition to DM, only the mx6dl/solo wandboard is supported. Add FIT image support so that all the wandboard variants can be supported, like it was prior to the DM conversion. Successfully booted Linux on mx6q/solo/qp wandboards. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-06-12 15:34:40 +00:00
imx6qp-sabresd.dtb \
nitrogen6x: migrate to using device tree Migrate to using device tree required for further driver model integration. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
2019-07-29 19:15:54 +00:00
imx6qp-wandboard-revd1.dtb \
endif
ARM: i.MX6: dts: Build dtb based on SOC type Build dtb's based on SOC type instead building arch type. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-04-11 12:32:23 +00:00
dtb-$(CONFIG_MX6SL) += imx6sl-evk.dtb
ARM: fix arch/arm/dts/Makefile Since commit 27cb7300ffda ("Ensure device tree DTS is compiled"), build succeeds irrespective of the correctness of Makefile. In fact, you can compile any defconfig without adding any entry in arch/*/dts/Makefile. As a result, a lot of wrong code have been merged unnoticed. I am going to revert that commit, and lots of hidden issues have come to light: [1] Typos armada-3720-uDPU.dts, sun8i-a83t-tbs-a711.dts use the extension ".dts" instead of ".dtb" [2] DTB is associated to undefined CONFIG option For example, mx6sllevk_defconfig defines CONFIG_MX6SLL, but associates its device tree to CONFIG_MX6SL, which is undefined. [3] Lots of entries are missing Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Chris Packham <judge.packham@gmail.com> [trini: add imx6ul pico dtbs] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-03-14 05:58:33 +00:00
dtb-$(CONFIG_MX6SLL) += imx6sll-evk.dtb
ARM: i.MX6: dts: Build dtb based on SOC type Build dtb's based on SOC type instead building arch type. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-04-11 12:32:23 +00:00
dtb-$(CONFIG_MX6SX) += \
imx: mx6sx: add dts for mx6sxsabreauto board Add dts for mx6sxsabreauto board. dts related files imported fro Linux (commit e5517c2a5a4). Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2016-11-28 09:49:47 +00:00
imx6sx-sabreauto.dtb \
ARM: dts: imx: vining2000: Import VINING|2000 DT from Linux Import iMX6SX VINING|2000 device tree from Linux 5.1.1 b724e9356404 . Enable DT control in full U-Boot . Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
2019-05-17 20:25:22 +00:00
imx6sx-sdb.dtb \
ARM: board: udoo_neo: Import UDOO Neo dts files Import the i.MX6SX based UDOO Neo dts files from Linux 5.12-rc1 and sync the i.MX6SX pinfunc.h Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Cc: Francesco Montefoschi <francesco.montefoschi@udoo.org> Cc: Breno Lima <breno.lima@nxp.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-04-01 20:08:10 +00:00
imx6sx-softing-vining-2000.dtb \
imx6sx-udoo-neo-basic.dtb \
imx6sx-udoo-neo-extended.dtb \
imx6sx-udoo-neo-full.dtb
ARM: i.MX6: dts: Build dtb based on SOC type Build dtb's based on SOC type instead building arch type. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-04-11 12:32:23 +00:00
dtb-$(CONFIG_MX6UL) += \
imx6ul: geam: Fix fdt_file mismatch fdt_file is looking for imx6ul-geam-kit.dtb but Linux has imx6ul-geam.dtb, since Linux skipped -kit on file name by below commit. "ARM: dts: imx6ul-geam: Skip suffix -kit from dts name" (sha1: 182de5ebce71e469cfa686fcdf08c9cbe11ece97) So, due to this mismatch U-Boot failed to pick the proper dtb which eventually break the Linux boot. This patch fixed this mismatch by - renaming dts files - update config option to use new dtb file - update fdt_file to new dtb file name Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-06-18 05:42:19 +00:00
imx6ul-geam.dtb \
i.MX6UL: isiot: Add eMMC boot support Boot from eMMC: -------------- U-Boot SPL 2017.01-00314-gd0cd9cd-dirty (Jan 25 2017 - 13:25:27) Trying to boot from MMC2 U-Boot 2017.01-00314-gd0cd9cd-dirty (Jan 25 2017 - 13:25:27 +0100) CPU: Freescale i.MX6UL rev1.1 528 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 105C) at 36C Reset cause: POR Model: Engicam Is.IoT MX6UL eMMC Starterkit DRAM: 512 MiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial switch to partitions #0, OK mmc1(part 0) is current device Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Reviewed by: Stefano Babic <sbabic@denx.de> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-02-24 10:15:17 +00:00
imx6ul-isiot-emmc.dtb \
arm: i.MX6UL: add Armadeus Systems OPOS6UL SoM and OPOS6ULDev carrier board OPOS6UL is an i.MX6UL based SoM with 256MB RAM, 4GB eMMC and an ethernet phy. OPOS6ULDev is carrier board for the OPOS6UL. U-Boot SPL 2017.03-rc3-00002-g5085c26 (Mar 07 2017 - 09:48:09) Trying to boot from MMC1 U-Boot 2017.03-rc3-00002-g5085c26 (Mar 07 2017 - 09:48:09 +0100) CPU: Freescale i.MX6UL rev1.0 528 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 105C) at 40C Reset cause: POR Model: Armadeus Systems OPOS6UL SoM on OPOS6ULDev board DRAM: 256 MiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 Video: 800x480x18 In: serial Out: serial Err: serial Net: FEC [PRIME] Hit any key to stop autoboot: 0 Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-03-07 13:33:25 +00:00
imx6ul-isiot-nand.dtb \
dts: imx6ul_evk: Add DTS files for 14x14 EVK and 9x9 EVK boards Add the board DTS files for 14x14 EVK and 9x9 EVK. They are necessary for converting to use u-boot DM driver. Two -u-boot.dtsi are added to modify compatible string of SPI flash device to "spi-flash". Signed-off-by: Ye Li <ye.li@nxp.com>
2018-06-28 03:23:16 +00:00
imx6ul-opos6uldev.dtb \
imx6ul-14x14-evk.dtb \
imx: Add PHYTEC phyBOARD-i.MX6UL-Segin Port for the PHYTEC phyBOARD-i.MX6UL-Segin single board computer. Based on the PHYTEC phyCORE-i.MX6UL SOM (PCL063). CPU: Freescale i.MX6UL rev1.2 528 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 105C) at 44C Reset cause: POR Board: PHYTEC phyCORE-i.MX6UL I2C: ready DRAM: 256 MiB NAND: 512 MiB MMC: FSL_SDHC: 0 In: serial Out: serial Err: serial Net: FEC0 Working: - Eth0 - i2C - MMC/SD - NAND - UART (1 & 5) - USB (host & otg) Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
2018-12-11 11:34:46 +00:00
imx6ul-9x9-evk.dtb \
ARM: dts: imx6ul-lite*: add DTS files for liteSOM and liteboard Import liteSOM and liteboard dts files from Linux v4.20. They will be used after transition to driver model and device-tree based boot. Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
2019-01-19 16:06:45 +00:00
imx6ul-9x9-evk.dtb \
imx6ul-liteboard.dtb \
imx: sync with kernel device tree for Phycore SoM Sync the Linux Kernel 5.4-rc6 device tree for Phytec Phycore SoM and Segin board based on imx6UL and imx6ULL. Changes includes Phytec naming convention for the devicetree files. Signed-off-by: Parthiban Nallathambi <parthitce@gmail.com> Acked-by: Peng Fan <peng.fan@nxp.com>
2019-11-04 18:50:07 +00:00
imx6ul-phytec-segin-ff-rdk-nand.dtb \
ARM: fix arch/arm/dts/Makefile Since commit 27cb7300ffda ("Ensure device tree DTS is compiled"), build succeeds irrespective of the correctness of Makefile. In fact, you can compile any defconfig without adding any entry in arch/*/dts/Makefile. As a result, a lot of wrong code have been merged unnoticed. I am going to revert that commit, and lots of hidden issues have come to light: [1] Typos armada-3720-uDPU.dts, sun8i-a83t-tbs-a711.dts use the extension ".dts" instead of ".dtb" [2] DTB is associated to undefined CONFIG option For example, mx6sllevk_defconfig defines CONFIG_MX6SLL, but associates its device tree to CONFIG_MX6SL, which is undefined. [3] Lots of entries are missing Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Chris Packham <judge.packham@gmail.com> [trini: add imx6ul pico dtbs] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-03-14 05:58:33 +00:00
imx6ul-pico-hobbit.dtb \
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
2021-09-29 14:42:41 +00:00
imx6ul-pico-pi.dtb \
imx: imx6ul: kontron-sl-mx6ul: Sync devicetrees Sync the devicetrees with Linux and adjust the board names. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2022-08-23 14:29:15 +00:00
imx6ul-kontron-bl.dtb \
imx6ull-kontron-bl.dtb
arm: imx: add i.MX6ULL 14x14 EVK board support Add i.MX6ULL EVK board support: Add device tree file, which is copied from NXP Linux. Enabled DM_MMC, DM_GPIO, DM_I2C, DM_SPI, PINCTRL, DM_REGULATOR. The uart iomux settings are still keeped in board file. Boot Log: U-Boot 2016.09-rc1-00366-gbb419ef-dirty (Aug 11 2016 - 13:08:58 +0800) CPU: Freescale i.MX6ULL rev1.0 at 396MHz CPU: Commercial temperature grade (0C to 95C) at 15C Reset cause: POR Model: Freescale i.MX6 ULL 14x14 EVK Board Board: MX6ULL 14x14 EVK DRAM: 512 MiB MMC: initialized IMX pinctrl driver FSL_SDHC: 0, FSL_SDHC: 1 In: serial Out: serial Err: serial Net: CPU Net Initialization Failed No ethernet found. Hit any key to stop autoboot: 0 => mmc dev 1 switch to partitions #0, OK mmc1 is current device Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2016-08-11 06:02:57 +00:00
ARM: fix arch/arm/dts/Makefile Since commit 27cb7300ffda ("Ensure device tree DTS is compiled"), build succeeds irrespective of the correctness of Makefile. In fact, you can compile any defconfig without adding any entry in arch/*/dts/Makefile. As a result, a lot of wrong code have been merged unnoticed. I am going to revert that commit, and lots of hidden issues have come to light: [1] Typos armada-3720-uDPU.dts, sun8i-a83t-tbs-a711.dts use the extension ".dts" instead of ".dtb" [2] DTB is associated to undefined CONFIG option For example, mx6sllevk_defconfig defines CONFIG_MX6SLL, but associates its device tree to CONFIG_MX6SL, which is undefined. [3] Lots of entries are missing Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Chris Packham <judge.packham@gmail.com> [trini: add imx6ul pico dtbs] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-03-14 05:58:33 +00:00
dtb-$(CONFIG_MX6ULL) += \
imx6ull-14x14-evk.dtb \
colibri-imx6ull/-emmc: synchronise device tree with linux Synchronise device tree with linux v5.19-rc5. Please note that this also means that instead of the previous "generic" U-Boot specific carrier board agnostic device trees we are now using the regular ones for the Colibri Evaluation (carrier) board V3 (e.g. imx6ull-colibri-eval-v3.dtb rather than the previous imx6ull-colibri.dtb and imx6ull-colibri-emmc-eval-v3.dtb rather than the previous imx6ull-colibri-emmc.dtb). Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-07-21 13:27:31 +00:00
imx6ull-colibri-emmc-eval-v3.dtb \
imx6ull-colibri-eval-v3.dtb \
imx: Add MYiR Tech MYS-6ULX support MYS-6ULX is single board computer (SBC) comes with eMMC or NAND based on imx6ULL SoC from NXP and provision for expansion board. This commit adds support only for SBC with NAND. CPU: Freescale i.MX6ULL rev1.1 528 MHz (running at 396 MHz) CPU: Commercial temperature grade (0C to 95C) at 45C Reset cause: WDOG Model: MYiR i.MX6ULL MYS-6ULX Single Board Computer with NAND Board: MYiR MYS-6ULX 6ULL Single Board Computer DRAM: 256 MiB NAND: 256 MiB MMC: FSL_SDHC: 0 In: serial@2020000 Out: serial@2020000 Err: serial@2020000 Net: FEC0 Working: - Eth0 - MMC/SD - NAND - UART 1 - USB host Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
2020-07-27 14:48:41 +00:00
imx6ull-myir-mys-6ulx-eval.dtb \
imx: Add SeeedStudio NPI-IMX6ULL Support CPU: Freescale i.MX6ULL rev1.1 792 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 105C) at 49C Reset cause: POR Model: Seeed NPi iMX6ULL Dev Board with NAND Board: Seeed NPi i.MX6ULL Dev Board DRAM: 512 MiB NAND: 512 MiB MMC: FSL_SDHC: 0 In: serial@2020000 Out: serial@2020000 Err: serial@2020000 Net: FEC0 Working: - Eth0 - MMC/SD - NAND - UART 1 - USB host Signed-off-by: Navin Sankar Velliangiri <navin@linumiz.com> Note: Changes in v2: * removed unnecessary space in imx6ull-seeed-npi-imx6ull-dev-board.dts file. * Used SZ_2M for CONFIG_SYS_MALLOC_LEN size allocation.
2021-05-18 03:33:20 +00:00
imx6ull-seeed-npi-imx6ull-dev-board.dtb \
imx: sync with kernel device tree for Phycore SoM Sync the Linux Kernel 5.4-rc6 device tree for Phytec Phycore SoM and Segin board based on imx6UL and imx6ULL. Changes includes Phytec naming convention for the devicetree files. Signed-off-by: Parthiban Nallathambi <parthitce@gmail.com> Acked-by: Peng Fan <peng.fan@nxp.com>
2019-11-04 18:50:07 +00:00
imx6ull-phytec-segin-ff-rdk-emmc.dtb \
arm: dts: import dts for i.MX6ULZ Import kernel dts for i.MX6ULZ from commit <0a8ad0ffa4d8> ("Merge tag 'for-linus-5.3-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-08-08 09:55:47 +00:00
imx6ull-dart-6ul.dtb \
ARM: imx: mx6ull: Add iMX6ULL VisionSOM SoM and EVK Add iMX6ULL VisionSOM SoM and VisionCB-RT-STD evaluation board support. The SoM has an iMX6ULL, 512 MiB of DRAM and microSD slot. The carrier board has Ethernet, USB host port, USB OTG port. Signed-off-by: Arkadiusz Karas <arkadiusz.karas@somlabs.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2020-01-02 18:31:21 +00:00
imx6ull-somlabs-visionsom.dtb \
bsh: imx6ulz_smm_m2: Add imx6ulz BSH SMM M2 boards Introduce BSH SystemMaster (SMM) M2 board family, which consists of: imx6ulz SMM M2 and imx6ulz SMM M2 PRO boards. Add support for imx6ulz BSH SMM M2 board: - 128 MiB DDR3 RAM - 256MiB Nand - USBOTG1 peripheral - fastboot. Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-09-18 15:09:53 +00:00
imx6ulz-bsh-smm-m2.dtb \
arm: dts: import dts for i.MX6ULZ Import kernel dts for i.MX6ULZ from commit <0a8ad0ffa4d8> ("Merge tag 'for-linus-5.3-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-08-08 09:55:47 +00:00
imx6ulz-14x14-evk.dtb
ARM: i.MX6: dts: Build dtb based on SOC type Build dtb's based on SOC type instead building arch type. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-04-11 12:32:23 +00:00
apalis/colibri_imx6: add device trees to makefile Add device trees to Makefile to avoid newly introduced error: Device Tree Source is not correctly specified. Please define 'CONFIG_DEFAULT_DEVICE_TREE' or build with 'DEVICE_TREE=<device_tree>' argument make[1]: *** [dts/Makefile:28: arch/arm/dts/imx6-apalis.dtb] Error 1 make: *** [Makefile:1009: dts/dt.dtb] Error 2 Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-03-25 16:38:02 +00:00
dtb-$(CONFIG_ARCH_MX6) += \
apalis_imx6: synchronise device tree with linux Synchronise device tree with linux-next 20220706. Please note that this also means that instead of the previous "generic" U-Boot specific carrier board agnostic device tree we are now using the regular one for the Apalis Evaluation (carrier) board (e.g. imx6q-apalis-eval.dtb rather than the previous imx6-apalis.dtb). Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-07-21 13:27:27 +00:00
imx6q-apalis-eval.dtb \
colibri_imx6: synchronise device tree with linux Synchronise device tree with linux-next next-20220708. Please note that this also means that instead of the previous "generic" U-Boot specific carrier board agnostic device tree we are now using the regular one for the Colibri Evaluation (carrier) board V3 (e.g. imx6dl-colibri-eval-v3.dtb rather than the previous imx6-colibri.dtb). Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-07-21 13:27:28 +00:00
imx6dl-colibri-eval-v3.dtb
apalis/colibri_imx6: add device trees to makefile Add device trees to Makefile to avoid newly introduced error: Device Tree Source is not correctly specified. Please define 'CONFIG_DEFAULT_DEVICE_TREE' or build with 'DEVICE_TREE=<device_tree>' argument make[1]: *** [dts/Makefile:28: arch/arm/dts/imx6-apalis.dtb] Error 1 make: *** [Makefile:1009: dts/dt.dtb] Error 2 Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-03-25 16:38:02 +00:00
Add out4.ru O4-iMX-NANO board Board designed for quick prototyping and has one microSD port, 2 Ethernet ports, 2 USB ports, I2C, SPI, CAN, RS-485, GPIO, UART interfaces, and 2 RGB LEDs. Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua> Cc: Stefano Babic <sbabic@denx.de>
2021-05-14 21:18:31 +00:00
dtb-$(CONFIG_O4_IMX_NANO) += \
o4-imx-nano.dtb
Add EV-iMX280-NANO-X-MB board A simple prototyping board with one microSD port, one Ethernet port, 2 USB ports, I2C, SPI, GPIO, and UART interfaces. Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua> Cc: Stefano Babic <sbabic@denx.de>
2021-05-14 21:18:33 +00:00
dtb-$(CONFIG_EV_IMX280_NANO_X_MB) += \
ev-imx280-nano-x-mb.dtb
arm: dts: imx7: colibri: split dt for raw NAND and eMMC devices In preparation of adding CONFIG_DM_MMC support use separate device trees for raw NAND and eMMC devices. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-01-08 11:42:29 +00:00
dtb-$(CONFIG_MX7) += imx7d-sdb.dtb \
ARM: fix arch/arm/dts/Makefile Since commit 27cb7300ffda ("Ensure device tree DTS is compiled"), build succeeds irrespective of the correctness of Makefile. In fact, you can compile any defconfig without adding any entry in arch/*/dts/Makefile. As a result, a lot of wrong code have been merged unnoticed. I am going to revert that commit, and lots of hidden issues have come to light: [1] Typos armada-3720-uDPU.dts, sun8i-a83t-tbs-a711.dts use the extension ".dts" instead of ".dtb" [2] DTB is associated to undefined CONFIG option For example, mx6sllevk_defconfig defines CONFIG_MX6SLL, but associates its device tree to CONFIG_MX6SL, which is undefined. [3] Lots of entries are missing Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Chris Packham <judge.packham@gmail.com> [trini: add imx6ul pico dtbs] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-03-14 05:58:33 +00:00
imx7d-sdb-qspi.dtb \
imx: Add support for Ronetix's iMX7-CM board Console boot log: U-Boot SPL 2021.04-00836-ga6232e065d-dirty (Apr 16 2021 - 15:16:35 +0200) Trying to boot from MMC1 U-Boot 2021.04-00836-ga6232e065d-dirty (Apr 16 2021 - 15:16:35 +0200) CPU: Freescale i.MX7D rev1.3 1000 MHz (running at 792 MHz) CPU: Commercial temperature grade (0C to 95C) at 44C Reset cause: POR Model: Ronetix iMX7-CM Board Board: iMX7-CM DRAM: 512 MiB PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11 MMC: FSL_SDHC: 0, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Net: Warning: ethernet@30be0000 (eth0) using random MAC address - fe:be:37:01:5a:3f eth0: ethernet@30be0000 Hit any key to stop autoboot: 0 Signed-off-by: Ilko Iliev <iliev@ronetix.at>
2021-04-16 13:48:13 +00:00
imx7-cm.dtb \
colibri-imx7d/-emmc: synchronise device tree with linux Synchronise device tree with linux-next next-20220708. Please note that this also means that instead of the previous "generic" U-Boot specific carrier board agnostic device trees we are now using the regular ones for the Colibri Evaluation (carrier) board V3 (e.g. imx7d-colibri-eval-v3.dtb rather than the previous imx7-colibri-rawnand.dtb and imx7d-colibri-emmc-eval-v3.dtb rather than the previous imx7-colibri-emmc.dtb). Please further note that the PMIC node name got changed from rn5t567@33 to pmic@33 which required adjustment in resp. board file board/toradex/colibri_imx7/colibri_imx7.c. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-07-21 13:27:35 +00:00
imx7d-colibri-emmc-eval-v3.dtb \
imx7d-colibri-eval-v3.dtb \
Arm: imx7d-pico: Import all Linux device tree for Pico i.MX7D SOM This patch imports the Linux kernel base board imx7d-pico.dtsi, pi board imx7d-pico-pi.dts and hobbit board imx7d-pico-hobbit.dts from Linux v5.1-rc1. Signed-off-by: Joris Offouga <offougajoris@gmail.com>
2019-04-04 12:00:52 +00:00
imx7s-warp.dtb \
ARM: dts: import meerkat96 board support It imports device tree source of meerkat96 board from Linux Kernel. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2019-07-07 12:59:54 +00:00
imx7d-meerkat96.dtb \
Arm: imx7d-pico: Import all Linux device tree for Pico i.MX7D SOM This patch imports the Linux kernel base board imx7d-pico.dtsi, pi board imx7d-pico-pi.dts and hobbit board imx7d-pico-hobbit.dts from Linux v5.1-rc1. Signed-off-by: Joris Offouga <offougajoris@gmail.com>
2019-04-04 12:00:52 +00:00
imx7d-pico-pi.dtb \
mx7d: Add Storopack's SMEGW01 board Add support for Storopack's SMEGW01 board, which is an IoT gateway based on the i.MX7D SoC. Based on the original U-Boot work done by Phytec. Signed-off-by: Fabio Estevam <festevam@denx.de>
2021-05-28 13:26:57 +00:00
imx7d-pico-hobbit.dtb \
imx7d-smegw01.dtb
vf610: dts: Add device tree support Add device tree files for Freescale Vybrid platform and Toradex Colibri VF50, VF61 modules. Device tree files are taken from upstream Kernel. Removed the stuff which are not used/supported yet in U-Boot. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
2015-06-01 13:07:21 +00:00
mx7ulp: Add support for Embedded Artists COM board The Embedded Artists COM board is based on NXP i.MX7ULP. It has a BD70528 PMIC from Rohm with discrete DCDC powering option and improved current observability (compared to the existing NXP i.MX7ULP EVK). Add the initial support for the board. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-12-09 13:43:03 +00:00
dtb-$(CONFIG_ARCH_MX7ULP) += imx7ulp-com.dtb \
imx7ulp-evk.dtb
imx: imx7ulp: add EVK board support Add EVK board support. Add the evk dts file. LOG: U-Boot 2017.03-rc2-00038-gab86c1d (Feb 22 2017 - 15:59:58 +0800) CPU: Freescale i.MX7ULP rev1.0 at 500 MHz Reset cause: POR Boot mode: Dual boot Model: NXP i.MX7ULP EVK DRAM: 1 GiB MMC: FSL_SDHC: 0 In: serial@402D0000 Out: serial@402D0000 Err: serial@402D0000 Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2017-02-22 08:21:56 +00:00
arm: highbank: Add devicetree files Add an empty version of this file, so that we can at least build this board when devicetrees are required. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-17 03:59:20 +00:00
dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb
imx: support i.MX8QM MEK board Add i.MX8QM MEK board support. Included a basic dts, enabled SPL FIT Boot log as below: U-Boot SPL 2019.01-rc1-00029-gf002213219 (Dec 24 2018 - 10:28:30 +0800) Normal Boot Trying to boot from MMC2_2 U-Boot 2019.01-rc1-00029-gf002213219 (Dec 24 2018 - 10:28:30 +0800) CPU: NXP i.MX8QM RevB A53 at 142933 MHz Model: Freescale i.MX8QM MEK Board: iMX8QM MEK Build: SCFW 9330215b Boot: SD1 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 Net: Error: ethernet@5b040000 address not set. eth-1: ethernet@5b040000 Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-03-05 02:32:49 +00:00
dtb-$(CONFIG_ARCH_IMX8) += \
board: toradex: add apalis imx8qm 4gb wb it v1.0b module support This commit adds initial support for the Toradex Apalis iMX8QM 4GB WB IT V1.0B module. Unlike the V1.0A early access samples exclusively booting from SD card, they are now strapped to boot from eFuses which are factory fused to properly boot from their on-module eMMC. U-Boot supports either booting from the on-module eMMC or may be used for recovery purpose using the universal update utility (uuu) aka mfgtools 3.0. Functionality wise the following is known to be working: - eMMC, 8-bit and 4-bit MMC/SD card slots - Gigabit Ethernet - GPIOs - I2C Unfortunately, there is no USB functionality for the i.MX 8QM as of yet. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Max Krummenacher <max.krummenacher@toradex.com>
2019-05-31 16:00:20 +00:00
fsl-imx8qm-apalis.dtb \
imx: support i.MX8QM MEK board Add i.MX8QM MEK board support. Included a basic dts, enabled SPL FIT Boot log as below: U-Boot SPL 2019.01-rc1-00029-gf002213219 (Dec 24 2018 - 10:28:30 +0800) Normal Boot Trying to boot from MMC2_2 U-Boot 2019.01-rc1-00029-gf002213219 (Dec 24 2018 - 10:28:30 +0800) CPU: NXP i.MX8QM RevB A53 at 142933 MHz Model: Freescale i.MX8QM MEK Board: iMX8QM MEK Build: SCFW 9330215b Boot: SD1 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 Net: Error: ethernet@5b040000 address not set. eth-1: ethernet@5b040000 Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-03-05 02:32:49 +00:00
fsl-imx8qm-mek.dtb \
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
2021-05-31 13:50:40 +00:00
imx8qm-cgtqmx8.dtb \
imx: support i.MX8QM DMSSE20 a1 board Add i.MX8QM DMSSE20 a1 board support U-Boot 2023.04-00030-g7be2f547b2 (Apr 21 2023 - 11:11:43 +0200) Model: Advantech iMX8QM DMSSE20 Board: DMS-SE20A1 8GB Build: SCFW 549b1e18, SECO-FW c9de51c0, ATF 5782363 Boot: USB DRAM: 8 GiB Core: 100 devices, 19 uclasses, devicetree: separate MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 Net: eth0: ethernet@5b040000 Warning: ethernet@5b050000 (eth1) using random MAC address - 32:05:0c:f9:5e:10 , eth1: ethernet@5b050000 Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
2023-04-21 10:11:50 +00:00
imx8qm-dmsse20-a1.dtb \
imx: support i.MX8QM ROM 7720 a1 board Add i.MX8QM ROM 7720a1 board support Boot log as below: U-Boot 2019.10-rc3-00004-gd073e0242f (Sep 20 2019 - 08:24:13 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Advantech iMX8QM Qseven series Board: ROM-7720-A1 4GB Build: SCFW 65afe5f6 Boot: SD2 DRAM: 4 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 Net: eth0: ethernet@5b040000Could not get PHY for FEC1: addr 1 , eth-1: ethernet@5b050000 Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
2019-09-20 07:08:41 +00:00
imx8qm-rom7720-a1.dtb \
arm: dts: Add devicetree support for iMXQXP AI_ML board Add devicetree support for iMXQXP AI_ML board from Einfochips. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-08-15 08:27:24 +00:00
fsl-imx8qxp-ai_ml.dtb \
board: toradex: add colibri imx8qxp 2gb wb it v1.0b module support This commit adds initial support for the Toradex Colibri iMX8QXP 2GB WB IT V1.0B module. Unlike the V1.0A early access samples exclusively booting from SD card, they are now strapped to boot from eFuses which are factory fused to properly boot from their on-module eMMC. U-Boot supports either booting from the on-module eMMC or may be used for recovery purpose using the universal update utility (uuu) aka mfgtools 3.0. Functionality wise the following is known to be working: - eMMC and MMC/SD card - Ethernet - GPIOs - I2C Unfortunately, there is no USB functionality for the i.MX 8QXP as of yet. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-05-31 15:56:39 +00:00
fsl-imx8qxp-colibri.dtb \
imx: add imx8x capricorn giedi board Add support for i.MX8X based Capricorn Giedi SoM. Supported interfaces: GPIO, ENET, eMMC, I2C, UART. Console output: U-Boot SPL 2020.01-00003-gfd1c98f (Jan 07 2020 - 15:51:25 +0100) Trying to boot from MMC1 Load image from MMC/SD 0x3e400 U-Boot 2020.01-00003-gfd1c98f (Jan 07 2020 - 15:51:25 +0100) ##v01.07 CPU: NXP i.MX8QXP RevB A35 at 1200 MHz at 30C Model: Siemens Giedi Board: Capricorn Boot: MMC0 DRAM: 1022 MiB MMC: FSL_SDHC: 0 Loading Environment from MMC... OK In: serial@5a080000 Out: serial@5a080000 Err: serial@5a080000 Net: eth1: ethernet@5b050000 [PRIME] Autobooting in 1 seconds, press "<Esc><Esc>" to stop Signed-off-by: Anatolij Gustschin <agust@denx.de>
2020-01-07 15:37:42 +00:00
fsl-imx8qxp-mek.dtb \
imx: add imx8x based deneb board Add support for Capricorn Deneb SoM variant. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2020-01-07 15:37:43 +00:00
imx8-deneb.dtb \
imx: add imx8x capricorn giedi board Add support for i.MX8X based Capricorn Giedi SoM. Supported interfaces: GPIO, ENET, eMMC, I2C, UART. Console output: U-Boot SPL 2020.01-00003-gfd1c98f (Jan 07 2020 - 15:51:25 +0100) Trying to boot from MMC1 Load image from MMC/SD 0x3e400 U-Boot 2020.01-00003-gfd1c98f (Jan 07 2020 - 15:51:25 +0100) ##v01.07 CPU: NXP i.MX8QXP RevB A35 at 1200 MHz at 30C Model: Siemens Giedi Board: Capricorn Boot: MMC0 DRAM: 1022 MiB MMC: FSL_SDHC: 0 Loading Environment from MMC... OK In: serial@5a080000 Out: serial@5a080000 Err: serial@5a080000 Net: eth1: ethernet@5b050000 [PRIME] Autobooting in 1 seconds, press "<Esc><Esc>" to stop Signed-off-by: Anatolij Gustschin <agust@denx.de>
2020-01-07 15:37:42 +00:00
imx8-giedi.dtb
imx: add i.MX8QXP MEK board support Add i.MX8QXP MEK board support Enabled pinctrl/clk/power-domain/mmc/i2c/fec driver. Added README file. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com>
2018-10-18 12:28:37 +00:00
arm: imx: add i.MX8ULP EVK support Add i.MX8ULP EVK basic support, support SD/I2C/ENET/LPUART Log as below: I would keep some debug info for now, and after we move to be stable and production launch, we could drop that. U-Boot SPL 2021.07-rc4-00164-gb800e19a6b (Jun 29 2021 - 10:23:30 +0800) Normal Boot upower_init: soc_id=48 upower_init: version:11.11.6 upower_init: start uPower RAM service user_upwr_rdy_callb: soc=b user_upwr_rdy_callb: RAM version:12.6 Turn on switches ok Turn on memories ok Clear DDR retention ok Poll for freq_chg_req on SIM register and change to F1 frequency. Poll for freq_chg_req on SIM register and change to F0 frequency. Poll for freq_chg_req on SIM register and change to F1 frequency. Poll for freq_chg_req on SIM register and change to F2 frequency. Poll for freq_chg_req on SIM register and change to F1 frequency. Poll for freq_chg_req on SIM register and change to F2 frequency. complete De-Skew PLL is locked and ready WDT: Not found! Trying to boot from BOOTROM image offset 0x8000, pagesize 0x200, ivt offset 0x0 Load image from 0x3a800 by ROM_API NOTICE: BL31: v2.4(release):imx_5.10.35_2.0.0_imx8ulp_er-10-gf37e59b94 NOTICE: BL31: Built : 01:56:58, Jun 29 2021 NOTICE: upower_init: start uPower RAM service NOTICE: user_upwr_rdy_callb: soc=b NOTICE: user_upwr_rdy_callb: RAM version:12.6 U-Boot 2021.07-rc4-00164-gb800e19a6b (Jun 29 2021 - 10:23:30 +0800) CPU: Freescale i.MX8ULP rev1.0 at 744 MHz Reset cause: POR Boot mode: Single boot Model: FSL i.MX8ULP EVK DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 2 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial@293a0000 Out: serial@293a0000 Err: serial@293a0000 Net: Warning: ethernet@29950000 (eth0) using random MAC address - 96:35:88:62:e0:44 eth0: ethernet@29950000 Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-07 08:01:13 +00:00
dtb-$(CONFIG_ARCH_IMX8ULP) += \
imx8ulp-evk.dtb
imx: update i.MX8MQ device trees This updates the i.MX8MQ device trees and, necessarily, also the i.MX8MQ clock bindings. These are taken verbatim from from the Linux kernel version v5.4-rc2, which three small changes which were already part of the previous device tree: * Keep the PSCI reserved memory range * Keep the alias for ethernet, so that the MAC address can be set * Keep the modified #include for the IOMUXC pins Signed-off-by: Patrick Wildt <patrick@blueri.se> Acked-by: Peng Fan <peng.fan@nxp.com>
2019-10-14 11:19:00 +00:00
dtb-$(CONFIG_ARCH_IMX8M) += \
ARM: dts: imx: Add support for Data Modul i.MX8M Mini eDM SBC Add support for Data Modul i.MX8M Mini eDM SBC board. This is an evaluation board for various custom display units. Currently supported are serial console, ethernet, eMMC, SD, SPI NOR, USB host and USB OTG. Reviewed-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2022-04-12 15:26:01 +00:00
imx8mm-data-modul-edm-sbc.dtb \
imx: update i.MX8MQ device trees This updates the i.MX8MQ device trees and, necessarily, also the i.MX8MQ clock bindings. These are taken verbatim from from the Linux kernel version v5.4-rc2, which three small changes which were already part of the previous device tree: * Keep the PSCI reserved memory range * Keep the alias for ethernet, so that the MAC address can be set * Keep the modified #include for the IOMUXC pins Signed-off-by: Patrick Wildt <patrick@blueri.se> Acked-by: Peng Fan <peng.fan@nxp.com>
2019-10-14 11:19:00 +00:00
imx8mm-evk.dtb \
board: imx8mm: Add Engicam i.Core MX8M Mini C.TOUCH 2.0 Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose Carrier board. Genaral features: - Ethernet 10/100 - Wifi/BT - USB Type A/OTG - Audio Out - CAN - LVDS panel connector i.Core MX8M Mini is an EDIMM SoM based on NXP i.MX8M Mini from Engicam. i.Core MX8M Mini needs to mount on top of this Carrier board for creating complete i.Core MX8M Mini C.TOUCH 2.0 board. Linux dts commit details: commit <a142252061ff> ("arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini C.TOUCH 2.0") Add support for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-04-26 12:53:49 +00:00
imx8mm-icore-mx8mm-ctouch2.dtb \
board: imx8mm: Add Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit Engicam EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive Evaluation Board. Genaral features: - LCD 7" C.Touch - microSD slot - Ethernet 1Gb - Wifi/BT - 2x LVDS Full HD interfaces - 3x USB 2.0 - 1x USB 3.0 - HDMI Out - Mini PCIe - MIPI CSI - 2x CAN - Audio Out i.Core MX8M Mini is an EDIMM SoM based on NXP i.MX8M Mini from Engicam. i.Core MX8M Mini needs to mount on top of this Evaluation board for creating complete i.Core MX8M Mini EDIMM2.2 Starter Kit. Linux dts commit details: commit <051c08eea682> ("arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit") Add support for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-04-26 12:53:48 +00:00
imx8mm-icore-mx8mm-edimm2.2.dtb \
imx: kontron-sl-mx8mm: Adjust devicetree names, compatibles and model strings This adjusts the names of the boards and SoMs to the official naming used by Kontron marketing. These changes also affect devicetree names and compatibles. The same changes have been submitted to the Linux kernel. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-08-24 13:59:15 +00:00
imx8mm-kontron-bl.dtb \
imx: kontron-sl-mx8mm: Add support for Kontron Electronics SoM SL i.MX8MM OSM-S This adds support for the Kontron Electronics SoM SL i.MX8MM OSM-S and the matching baseboard BL i.MX8MM OSM-S. The SoM hardware complies to the Open Standard Module (OSM) 1.0 specification, size S (https://sget.org/standards/osm). The existing board configuration for the non-OSM SoM is reused and allows to detect the SoM variant at runtime. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-08-24 13:59:19 +00:00
imx8mm-kontron-bl-osm-s.dtb \
ARM: dts: imx8mm: Add i.MX8M Mini Toradex Verdin based Menlo board Add new board based on the Toradex Verdin iMX8M Mini SoM, the MX8Menlo. The board is a compatible replacement for i.MX53 M53Menlo and features USB, multiple UARTs, ethernet, LEDs, SD and eMMC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@denx.de> Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Max Krummenacher <max.krummenacher@toradex.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2022-04-08 00:15:01 +00:00
imx8mm-mx8menlo.dtb \
imx8mm-phg: Add board support Add the board support for the i.MX8MM Cloos PHG board. This board uses a imx8mm-tqma8mqml SoM from TQ-Group. imx8mm-phg.dts and imx8mm-tqma8mqml.dtsi are taken directly from Linux 6.2-rc3. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2023-01-10 20:18:08 +00:00
imx8mm-phg.dtb \
arm: dts: imx8mm: add Gateworks i.MX8 Mini Dev kits Add Gateworks i.MX 8M Mini Development kits from Linux-5.12-rc1 Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-03-02 22:00:20 +00:00
imx8mm-venice.dtb \
imx8mm-venice-gw71xx-0x.dtb \
imx8mm-venice-gw72xx-0x.dtb \
imx8mm-venice-gw73xx-0x.dtb \
board: gateworks: venice: add imx8mm-gw7901 support The Gateworks GW7901 is an ARM based single board computer (SBC) featuring: - i.MX8M Mini SoC - LPDDR4 DRAM - eMMC FLASH - SPI FRAM - Gateworks System Controller (GSC) - Atmel ATECC Crypto Authentication - USB 2.0 - Microchip GbE Switch - Multiple multi-protocol RS232/RS485/RS422 Serial ports - onboard 802.11ac WiFi / BT - microSD socket - miniPCIe socket with PCIe, USB 2.0 and dual SIM sockets - Wide range DC power input - 802.3at PoE To add support for this board: - add dts from Linux (accepted for v5.14) - add SPL PMIC config Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-06-30 23:50:02 +00:00
imx8mm-venice-gw7901.dtb \
board: gateworks: venice: add imx8mm-gw7902 support The GW7902 is based on the i.MX 8M Mini / Nano SoC featuring: - LPDDR4 DRAM - eMMC FLASH - Gateworks System Controller - LTE CAT M1 modem - USB 2.0 HUB - M.2 Socket with USB2.0, PCIe, and dual-SIM - IMX8M FEC - PCIe based GbE - RS232/RS485/RS422 serial transceiver - GPS - CAN bus - WiFi / Bluetooth - MIPI header (DSI/CSI/GPIO/PWM/I2S) - PMIC Do the following to add support for it: - add dts - add PMIC config Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-07-27 22:19:41 +00:00
imx8mm-venice-gw7902.dtb \
board: gateworks: venice: add imx8mm-gw7903 support The GW7903 is based on the i.MX 8M Mini SoC featuring: - LPDDR4 DRAM - eMMC FLASH - microSD socket with voltage select support - Gateworks System Controller - M.2 A-E Socket with USB2.0 and PCIe - MiniPCIe Socket with PCIe, USB2.0, and SIM - IMX8M FEC - RS232/RS485/RS422 serial transceiver - LIS2DE12 3-axis accelerometer - front panel LED's - off-board isolated digital I/O - Wide range DC power input - 802.3at PoE - PMIC Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-02-18 23:19:33 +00:00
imx8mm-venice-gw7903.dtb \
board: gateworks: venice: add imx8mm-gw7904 support The GW7904 is based on the i.MX 8M Mini SoC featuring: - LPDDR4 DRAM - eMMC FLASH - microSD connector with UHS support - LIS2DE12 3-axis accelerometer - Gateworks System Controller - IMX8M FEC - 2x RS232 off-board connectors - PMIC - 10x bi-color LED's - 1x miniPCIe socket with PCIe and USB2.0 - 802.3at Class 4 PoE - 10-30VDC input via barrel-jack Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-09-14 16:02:19 +00:00
imx8mm-venice-gw7904.dtb \
imx8mm-mx8menlo/verdin-imx8mm: synchronise device tree with linux Synchronise device tree with linux v5.19-rc5. Please note that this also means that instead of the previous "generic" U-Boot specific carrier board agnostic device tree we are now using the regular one for the Verdin Development (carrier) board (e.g. imx8mm-verdin-wifi-dev.dtb rather than the previous imx8mm-verdin.dtb). Please further note that the PMIC node name got changed from a pmic label to pmic@25 which required adjustment in resp. board SPL file board/toradex/verdin-imx8mm/spl.c. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-07-21 13:41:23 +00:00
imx8mm-verdin-wifi-dev.dtb \
board: phytec: imx8mm: Add PHYTEC phyCORE-i.MX8MM support Add support PHYTEC phyCORE-i.MX8MM SOM. Supported features: - 2GB LPDDR4 RAM - 1x 1Gbit Ethernet - eMMC - external SD - debug UART3 - watchdog - i2c eeprom Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
2020-08-21 07:55:53 +00:00
phycore-imx8mm.dtb \
bsh: imx8mn-smm-s2/pro: Add iMX8MN BSH SMM S2 boards Introduce BSH SystemMaster (SMM) S2 board family, which consists of: iMX8MN SMM S2 and iMX8MN SMM S2 PRO boards. Add support for iMX8MN BSH SMM S2 board: - 256 MiB DDR3 RAM - 512MiB Nand - USBOTG1 peripheral - fastboot. - 100Mbit Ethernet Add support for iMX8MN BSH SMM S2 PRO board: - 512 MiB DDR3 RAM - 8 GiB eMMC - USBOTG1 peripheral - fastboot. - 100Mbit Ethernet Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
2022-04-12 13:31:38 +00:00
imx8mn-bsh-smm-s2.dtb \
imx8mn-bsh-smm-s2pro.dtb \
imx: add i.MX8MN DDR4 board support Support pinctrl/clk/sdhc, include ddr4 timing data. Log: U-Boot SPL 2019.10-rc3-00356-g497c500423-dirty (Sep 16 2019 - 10:54:58 +0800) Normal Boot Trying to boot from BOOTROM image offset 0x8000, pagesize 0x200, ivt offset 0x0 U-Boot 2019.10-rc3-00356-g497c500423-dirty (Sep 16 2019 - 10:54:58 +0800) CPU: Freescale i.MX8MNano rev1.0 at 24 MHz Reset cause: POR Model: NXP i.MX8MNano DDR4 EVK board DRAM: 2 GiB MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-09-16 03:09:55 +00:00
imx8mn-ddr4-evk.dtb \
ARM:imx:imx8mq-cm: Add support for Ronetix iMX8MQ-CM Supported peripherals: Ethernet, eMMC, Serial. U-Boot SPL 2021.04-00911-g5fa1e2ffeb-dirty (Apr 23 2021 - 09:11:14 +0200) Normal Boot Trying to boot from MMC2 U-Boot 2021.04-00911-g5fa1e2ffeb-dirty (Apr 23 2021 - 09:11:14 +0200) CPU: Freescale i.MX8MQ rev2.1 at 1000 MHz Reset cause: POR Model: Ronetix iMX8M-CM SoM DRAM: 1 GiB WDT: Started with servicing (60s timeout) MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... OK In: serial Out: serial Err: serial Net: Warning: ethernet@30be0000 (eth0) using random MAC address - 42:0d:e7:78:da:53 eth0: ethernet@30be0000 Hit any key to stop autoboot: 0 u-boot=> Signed-off-by: Ilko Iliev <iliev@ronetix.at>
2021-04-23 07:45:52 +00:00
imx8mq-cm.dtb \
imx8mn: Add LPDDR4 EVK board support Add support for iMX8MN LPDDR4 EVK board which uses 2GB LPDDR4 and PCA9450B PMIC. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-03-19 07:57:08 +00:00
imx8mn-evk.dtb \
imx8mn_var_som: Add support for Variscite VAR-SOM-MX8M-NANO board Add support for iMX8MN VAR-SOM-MX8M-NANO board. Enables support for: - 1GiB DDR4 RAM - 16 GiB eMMC - SD card - Gigabit ethernet - USBOTG1 peripheral - fastboot Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-11-23 16:33:30 +00:00
imx8mn-var-som-symphony.dtb \
board: gateworks: venice: add imx8mn-gw7902 support The GW7902 is based on the i.MX 8M Mini / Nano SoC featuring: - LPDDR4 DRAM - eMMC FLASH - Gateworks System Controller - LTE CAT M1 modem - USB 2.0 HUB - M.2 Socket with USB2.0, PCIe, and dual-SIM - IMX8M FEC - PCIe based GbE - RS232/RS485/RS422 serial transceiver - GPS - CAN bus - WiFi / Bluetooth - MIPI header (DSI/CSI/GPIO/PWM/I2S) - PMIC To add support for the i.MX8M Nano GW7902: - Add imx8mn-venice dts/defconfig/include - Add imx8mn-gw7902 dts - Add imx8mn-2gb lpddr4 dram configs - Add misc support for IMX8M Nano SoC - rename imx8mm-venice.c to venice.c as it is no longer imx8mm specific - update README with differences for IMX8MN vs IMX8MM Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-11 18:48:56 +00:00
imx8mn-venice.dtb \
imx8mn-venice-gw7902.dtb \
imx: add i.MX8MP EVK board Add basic i.MX8MP EVK board support U-Boot SPL 2020.01-rc4-00388-gb1bf40c0ae-dirty (Dec 30 2019 - 17:55:33 +0800) power_pca9450b_init DDRINFO: start DRAM init DDRINFO:ddrphy calibration done DDRINFO: ddrmix config done Normal Boot Failed to find clock node. Check device tree WDT: Not found! Trying to boot from BOOTROM image offset 0x8000, pagesize 0x200, ivt offset 0x0 U-Boot 2020.01-rc4-00388-gb1bf40c0ae-dirty (Dec 30 2019 - 17:55:33 +0800) CPU: Freescale i.MX8MP rev1.0 at 1000 MHz Reset cause: POR Model: NXP i.MX8MPlus EVK board DRAM: 6 GiB MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 0 u-boot=> mmc list FSL_SDHC: 1 (SD) FSL_SDHC: 2 Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-12-30 09:46:21 +00:00
imx8mq-evk.dtb \
imx: Add support for i.MX8MM Beacon EmbeddedWorks devkit. Beacon EmbeddedWorks, formerly known as Logic PD, is releasing a devkit based on the i.MX8M Mini SoC consisting of baseboard + SOM. It supports eMMC on the SOM, microSD on the baseboard, various GPIO, the PINCTRL, and UART. Signed-off-by: Adam Ford <aford173@gmail.com>
2020-05-03 13:11:33 +00:00
imx8mm-beacon-kit.dtb \
imx: Add support for i.MX8MN Beacon EmbeddedWorks devkit. Beacon EmbeddedWorks is releasing a devkit based on the i.MX8M Nano SoC consisting of baseboard + SOM. The kit is based on the same design as the Beacon dev kit with the i.MX8M Mini. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-12-11 12:01:46 +00:00
imx8mn-beacon-kit.dtb \
arm: dts: imx8mq: add MNT Reform 2 Device tree taken from Linux v5.16-rc5. Signed-off-by: Patrick Wildt <patrick@blueri.se> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-01-08 15:04:55 +00:00
imx8mq-mnt-reform2.dtb \
arm: imx: Add support for Google's Coral Dev Board Add initial support for Google's Coral Dev Board based on i.MX8MQ. https://coral.ai/products/dev-board The Phanbell naming has been used here to match the naming convention used in Google's U-Boot source tree: https://coral.googlesource.com/uboot-imx/ Co-developed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com> Tested-by: Marco Franchi <marcofrk@gmail.com>
2020-03-06 10:46:33 +00:00
imx8mq-phanbell.dtb \
arm64: imx: Add support for imx8mp-beacon-kit Beacon Embedded has an i.MX8M Plus development kit which consists of a SOM + baseboard. The SOM includes Bluetooth, WiFi, QSPI, eMMC, and one Ethernet PHY. The baseboard includes audio, HDMI, USB-C Dual Role port, USB Hub with five ports, a PCIe slot, and a second Ethernet PHY. The device trees are already queued for inclusion in Linux 6.3. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2023-03-24 03:06:16 +00:00
imx8mp-beacon-kit.dtb \
ARM: dts: imx: Add support for Data Modul i.MX8M Plus eDM SBC Add support for Data Modul i.MX8M Plus eDM SBC board. This is an evaluation board for various custom display units. Currently supported are serial console, ethernet, eMMC, SD, SPI NOR, USB. Signed-off-by: Marek Vasut <marex@denx.de>
2023-04-03 23:07:43 +00:00
imx8mp-data-modul-edm-sbc.dtb \
ARM: dts: imx: Add support for DH electronics i.MX8M Plus DHCOM and PDK2 Add support for DH electronics i.MX8M Plus DHCOM SoM on PDK2 carrier board. Currently supported are serial console, EQoS and FEC ethernets, eMMC, SD, SPI NOR and USB 3.0 host. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2022-05-21 14:56:26 +00:00
imx8mp-dhcom-pdk2.dtb \
ARM: dts: imx: Add support for DH electronics i.MX8M Plus DHCOM on PDK3 Add support for DH electronics i.MX8M Plus DHCOM SoM on PDK3 carrier board. Currently supported are serial console, EQoS and FEC ethernets, eMMC, SD, SPI NOR and USB 3.0 host. Signed-off-by: Marek Vasut <marex@denx.de>
2023-03-02 22:40:44 +00:00
imx8mp-dhcom-pdk3.dtb \
ARM: imx: pico-imx8mq: Add support for Technexion Pico-iMX8MQ Add initial support for Technexion Pico-iMX8MQ SoM on PicoPI carrier board. Currently working is ethernet, serial, eMMC. DT is imported from Linux 5.4.28 ("462afcd6e7ea") . Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: "NXP i.MX U-Boot Team" <uboot-imx@nxp.com> Cc: Peng Fan <peng.fan@nxp.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2020-04-29 18:09:08 +00:00
imx8mp-evk.dtb \
arm64: dts: imx8mp: Add Engicam i.Core MX8M Plus EDIMM2.2 Starter Kit Genaral features: - LCD 7" C.Touch - microSD slot - Ethernet 1Gb - Wifi/BT - 2x LVDS Full HD interfaces - 3x USB 2.0 - 1x USB 3.0 - HDMI Out - Plus PCIe - MIPI CSI - 2x CAN - Audio Out i.Core MX8M Plus is an EDIMM SoM based on NXP i.MX8M Plus from Engicam. i.Core MX8M Plus needs to mount on top of this Evaluation board for creating complete i.Core MX8M Plus EDIMM2.2 Starter Kit. Add support for it. Sync the i.Core MX8M Plus is an EDIMM SoM based on NXP devicetree file from linux-next tree. commit <aec8ad34f7f24> (arm64: dts: imx8mp: Add Engicam i.Core MX8M Plus EDIMM2.2 Starter Kit) Signed-off-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2022-08-26 12:33:36 +00:00
imx8mp-icore-mx8mp-edimm2.2.dtb \
arm: imx8mp: Initial MSC SM2S iMX8MP support Add support for the MSC SM2S-IMX8PLUS SMARC Module. Tested in conjunction with the MSC SM2-MB-EP1 Mini-ITX Carrier Board. Signed-off-by: Martyn Welch <martyn.welch@collabora.com> Signed-off-by: Fabio Estevam <festevam@denx.de>
2022-10-25 09:55:02 +00:00
imx8mp-msc-sm2s.dtb \
board: phytec: imx8mp: Add PHYTEC phyCORE-i.MX8MP support Add initial support PHYTEC phyCORE-i.MX8MP SOM. Supported features: - 2GB LPDDR4 RAM - eMMC - external SD - debug UART2 - watchdog Signed-off-by: Teresa Remmet <t.remmet@phytec.de> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-01-13 15:28:09 +00:00
imx8mp-phyboard-pollux-rdk.dtb \
board: gateworks: venice: add imx8mp-venice-gw740x support The GW74xx is based on the i.MX 8M Plus SoC featuring: - LPDDR4 DRAM - eMMC FLASH - Gateworks System Controller - PCIe Gen 3.0 switch (build option) - USB 3.0 HUB - USB Type-C front panel connector - GPS - 3-axis accelerometer - CAN bus - 6x GbE RJ45 front-panel jacks - 1x IMX8M FEC RGMII GbE (with Passive PoE) - 5x IMX8M EQOS RGMII 6 port GbE Switch (1x with 802.3af class 5 Active PoE) - RS232/RS485/RS422 serial transceiver - MIPI header (DSI/CSI/GPIO/PWM/I2S) - DigI/O header (UART/GPIO/I2C/ADC) - 802.11ac WiFi - Bluetooth BLE - 3x MiniPCIe sockets with PCI/USB - 1x M.2 Socket with USB2.0, PCIe, and dual-SIM - PMIC - Wide range DC input supply (8V to 60V DC) Do the following to add support for this and future imx8mp-venice boards: - add dts - add DRAM config - add PMIC config - add IMX8MP support in spl.c and venice.c Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-04-13 18:31:09 +00:00
imx8mp-venice.dtb \
imx8mp-venice-gw74xx.dtb \
verdin-imx8mp: synchronise device tree with linux Synchronise device tree with linux v5.19-rc5. Please note that this also means that instead of the previous "generic" U-Boot specific carrier board agnostic device tree we are now using the regular one for the Verdin Development (carrier) board (e.g. imx8mp-verdin-wifi-dev.dtb rather than the previous imx8mp-verdin.dtb). Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-07-21 13:46:44 +00:00
imx8mp-verdin-wifi-dev.dtb \
board: kontron: pitx-imx8m: Add Kontron pitx-imx8m board support The Kontron pitx-imx8m is an NXP i.MX8MQ based board in the pITX form factor. Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
2022-01-31 16:30:45 +00:00
imx8mq-pico-pi.dtb \
board: purism: add the Purism Librem5 phone Initial commit of Librem5 u-boot and SPL Signed-off-by: Angus Ainslie <angus@akkea.ca> Co-developed-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-08-25 13:46:02 +00:00
imx8mq-kontron-pitx-imx8m.dtb \
imx8mq-librem5-r4.dtb
imx: add i.MX8MQ EVK support Add i.MX8MQ EVK support. SPL will initialize ddr and load ddr phy firmware. Then loading FIT image, ATF to OCRAM, U-Boot and DTB to DRAM. The boot log with Arm trusted firmware console enabled: " U-Boot SPL 2018.11-00142-g9ae14e7274 (Nov 20 2018 - 18:13:16 +0800) PMIC: PFUZE100 ID=0x10 Normal Boot Trying to boot from MMC2 NOTICE: Configureing TZASC380 NOTICE: BL31: v1.5(release):p9.0.0_1.0.0-beta-20180928-8-ge09c4b62-dirty NOTICE: BL31: Built : 09:28:54, Nov 8 2018 lpddr4 swffc start NOTICE: sip svc init U-Boot 2018.11-00142-g9ae14e7274 (Nov 20 2018 - 18:13:16 +0800) CPU: Freescale i.MX8MQ rev2.0 at 1000 MHz Reset cause: POR Model: Freescale i.MX8MQ EVK DRAM: 3 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 In: serial Out: serial Err: serial Net: Warning: ethernet@30be0000 using MAC address from ROM eth0: ethernet@30be0000 Hit any key to stop autoboot: 0 " Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2018-11-20 10:20:00 +00:00
imx: imx93_evk: Add basic board support Add basic board codes and defconfig for i.MX93 11x11 EVK board. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26 08:41:10 +00:00
dtb-$(CONFIG_ARCH_IMX9) += \
imx93-11x11-evk.dtb
Add support for i.MXRT1020-EVK board Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-02-18 19:02:55 +00:00
dtb-$(CONFIG_ARCH_IMXRT) += imxrt1050-evk.dtb \
ARM: dts: imx: add i.MXRT1170-EVK support The NXP i.MXRT1170 Evaluation Kit (EVK) provides a platform for rapid evaluation of the i.MXRT, which features NXP's implementation of the Arm Cortex-M7 and Cortex-M4 core. The EVK provides 64 MB SDRAM, Micro SD card socket, USB 2.0 OTG. This patch aims to support the preliminary booting up features as follows: GPIO LPUART SD/MMC SDRAM Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
2022-07-26 05:43:45 +00:00
imxrt1020-evk.dtb \
imxrt1170-evk.dtb \
imx: imxrt1050-evk: Add support for the NXP i.MXRT1050-EVK This commit adds board support for i.MXRT1050-EVK from NXP. This board is an evaluation kit provided by NXP for i.MXRT105x processor family. More information about this board can be found here: https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/i.mx-rt1050-evaluation-kit:MIMXRT1050-EVK The initial supported/tested devices include: - Debug serial - SD Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-10 14:51:48 +00:00
ARM: fix arch/arm/dts/Makefile Since commit 27cb7300ffda ("Ensure device tree DTS is compiled"), build succeeds irrespective of the correctness of Makefile. In fact, you can compile any defconfig without adding any entry in arch/*/dts/Makefile. As a result, a lot of wrong code have been merged unnoticed. I am going to revert that commit, and lots of hidden issues have come to light: [1] Typos armada-3720-uDPU.dts, sun8i-a83t-tbs-a711.dts use the extension ".dts" instead of ".dtb" [2] DTB is associated to undefined CONFIG option For example, mx6sllevk_defconfig defines CONFIG_MX6SLL, but associates its device tree to CONFIG_MX6SL, which is undefined. [3] Lots of entries are missing Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Chris Packham <judge.packham@gmail.com> [trini: add imx6ul pico dtbs] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-03-14 05:58:33 +00:00
dtb-$(CONFIG_RCAR_GEN2) += \
r8a7790-lager-u-boot.dtb \
r8a7790-stout-u-boot.dtb \
r8a7791-koelsch-u-boot.dtb \
r8a7791-porter-u-boot.dtb \
r8a7792-blanche-u-boot.dtb \
r8a7793-gose-u-boot.dtb \
r8a7794-alt-u-boot.dtb \
r8a7794-silk-u-boot.dtb
ARM: dts: rmobile: Import DTS from Linux 4.12 Import the RCar Gen3 DTS and headers from upstream Linux kernel v4.12-rc6, commit 6f7da290413ba713f0cdd9ff1a2a9bb129ef4f6c . This includes both M3 and H3 ULCB and Salvator-X boards. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-07-21 21:16:59 +00:00
dtb-$(CONFIG_RCAR_GEN3) += \
ARM: rmobile: Add Beacon EmbeddedWorks RZG2M Dev Kit The Beacon EmbeddedWorks kit is based on the R8A774A1 SoC also known as the RZ/G2M. The kit consists of a SOM + Baseboard and supports microSD, eMMC, Ethernet, a couple celular radios, two CAN interfaces, Bluetooth and WiFi. Signed-off-by: Adam Ford <aford173@gmail.com>
2020-06-30 14:30:11 +00:00
r8a774a1-beacon-rzg2m-kit.dtb \
ARM: rmobile: Add Beacon EmbeddedWorks RZG2N Dev Kit The Beacon EmbeddedWorks kit is based on the R8A774B1 SoC also known as the RZ/G2N. The kit consists of a SOM + Baseboard and supports microSD, eMMC, Ethernet, a couple celular radios, two CAN interfaces, Bluetooth and WiFi. It shares much of the same design as the RZ/G2M dev kit. Signed-off-by: Adam Ford <aford173@gmail.com>
2021-02-03 12:57:19 +00:00
r8a774b1-beacon-rzg2n-kit.dtb \
ARM: rmobile: Add Beacon EmbeddedWorks RZG2H Dev Kit The Beacon EmbeddedWorks kit is based on the R8A774E1 SoC also known as the RZ/G2H. The kit consists of a SOM + Baseboard and supports microSD, eMMC, Ethernet, a couple celular radios, two CAN interfaces, Bluetooth and WiFi. It shares much of the same design as the RZ/G2M and RZ/G2N dev kits. Signed-off-by: Adam Ford <aford173@gmail.com>
2021-02-03 12:57:20 +00:00
r8a774e1-beacon-rzg2h-kit.dtb \
arm: rmobile: Add HopeRun HiHope RZ/G2M board support The HiHope RZ/G2M board from HopeRun consists of main board (HopeRun HiHope RZ/G2M main board) and sub board(HopeRun HiHope RZ/G2M sub board). The HiHope RZ/G2M sub board sits below the HiHope RZ/G2M main board. This patch adds the required board support to boot HopeRun HiHope RZ/G2M board. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
2021-03-01 17:08:47 +00:00
r8a774a1-hihope-rzg2m-u-boot.dtb \
arm: rmobile: Add HopeRun HiHope RZ/G2N board support The HiHope RZ/G2N board from HopeRun consists of main board (HopeRun HiHope RZ/G2N main board) and sub board(HopeRun HiHope RZ/G2N sub board). The HiHope RZ/G2N sub board sits below the HiHope RZ/G2N main board. This patch adds the required board support to boot HopeRun HiHope RZ/G2N board. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
2021-03-01 17:08:48 +00:00
r8a774b1-hihope-rzg2n-u-boot.dtb \
arm: rmobile: Add Silicon Linux EK874 board support The EK874 development kit from Silicon Linux is made of CAT874 (the main board) and CAT875 (the sub board that goes on top of CAT874). This patch adds the required board support to boot Si-Linux EK874 board based on R8A774C0 SoC. DTS files apart from r8a774c0-ek874-u-boot.dts and r8a774c0-u-boot.dtsi have been imported from Linux kernel 5.11 commit f40ddce88593 ("Linux 5.11"). Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
2021-03-15 22:24:05 +00:00
r8a774c0-ek874-u-boot.dtb \
arm: rmobile: Add HopeRun HiHope RZ/G2H board support The HiHope RZ/G2H board from HopeRun consists of main board (HopeRun HiHope RZ/G2H main board) and sub board(HopeRun HiHope RZ/G2H sub board). The HiHope RZ/G2H sub board sits below the HiHope RZ/G2H main board. This patch adds the required board support to boot HopeRun HiHope RZ/G2H board. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
2021-03-01 17:08:49 +00:00
r8a774e1-hihope-rzg2h-u-boot.dtb \
ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.6.2 Synchronize R-Car Gen3 device trees with Linux 5.6.2, commit 9fbe5c87eaa9b72db08425c52c373eb5f6537a0a . Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2020-04-04 14:12:48 +00:00
r8a77950-ulcb-u-boot.dtb \
r8a77950-salvator-x-u-boot.dtb \
r8a77960-ulcb-u-boot.dtb \
r8a77960-salvator-x-u-boot.dtb \
r8a77965-ulcb-u-boot.dtb \
ARM: dts: rmobile: Build -u-boot variants of DTs Build the -u-boot variants of the device trees so they can be included in Multi-DTB fitImage, which in turn allows us to build single U-Boot image for multiple boards. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2018-10-18 18:27:16 +00:00
r8a77965-salvator-x-u-boot.dtb \
r8a77970-eagle-u-boot.dtb \
ARM: renesas: Add R8A77980 V3H Condor board code Add board code for the R8A77980 V3H Condor board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-07-29 17:59:44 +00:00
r8a77980-condor-u-boot.dtb \
ARM: dts: rmobile: Build -u-boot variants of DTs Build the -u-boot variants of the device trees so they can be included in Multi-DTB fitImage, which in turn allows us to build single U-Boot image for multiple boards. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2018-10-18 18:27:16 +00:00
r8a77990-ebisu-u-boot.dtb \
ARM: rmobile: Turn R-Car V3U into R-Car Gen4 Despite the name, R-Car V3U is the first member of the R-Car Gen4 family [1]. Hence reflect this in related files, select appropriate configuration options and split DT build into its own GEN4 entry. [1] https://www.renesas.com/us/en/products/automotive-products/automotive-system-chips-socs/r-car-v3u-best-class-r-car-v3u-asil-d-system-chip-automated-driving Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [Marek: Deduplicate DTC_FLAGS addition using RCAR_64 symbol Update commit message]
2023-02-28 21:34:41 +00:00
r8a77995-draak-u-boot.dtb
dtb-$(CONFIG_RCAR_GEN4) += \
ARM: renesas: Add R8A779F0 S4 Spider board code Add board code for R8A779F0 S4 Spider board. Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [Marek: Synchronize configuration symbols which are now switched to Kconfig Mallocate gd->bd->bi_boot_params, i.e. drop the assignment Sort headers, use clrbits_le32(), use BIT macros where appropriate Use CONFIG_SYS_CLK_FREQ for counter frequency instead of custom macro]
2023-02-28 21:34:46 +00:00
r8a779a0-falcon-u-boot.dtb \
ARM: renesas: Add R8A779G0 V4H White Hawk board code Add board code for R8A779G0 V4H White Hawk board. Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [Marek: Synchronize configuration symbols which are now switched to Kconfig Mallocate gd->bd->bi_boot_params, i.e. drop the assignment Sort headers, use clrbits_le32(), use BIT macros where appropriate Use CONFIG_SYS_CLK_FREQ for counter frequency instead of custom macro]
2023-02-28 21:37:08 +00:00
r8a779f0-spider-u-boot.dtb \
r8a779g0-white-hawk-u-boot.dtb
ARM: dts: rmobile: Import DTS from Linux 4.12 Import the RCar Gen3 DTS and headers from upstream Linux kernel v4.12-rc6, commit 6f7da290413ba713f0cdd9ff1a2a9bb129ef4f6c . This includes both M3 and H3 ULCB and Salvator-X boards. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-07-21 21:16:59 +00:00
ARM: rmobile: Turn R-Car V3U into R-Car Gen4 Despite the name, R-Car V3U is the first member of the R-Car Gen4 family [1]. Hence reflect this in related files, select appropriate configuration options and split DT build into its own GEN4 entry. [1] https://www.renesas.com/us/en/products/automotive-products/automotive-system-chips-socs/r-car-v3u-best-class-r-car-v3u-asil-d-system-chip-automated-driving Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [Marek: Deduplicate DTC_FLAGS addition using RCAR_64 symbol Update commit message]
2023-02-28 21:34:41 +00:00
ifdef CONFIG_RCAR_64
ARM: dts: rmobile: Reserve space in R-Car Gen3 DTs Reserve 4 kiB of space in R-Car Gen3 DTs when those DTs are compiled to permit patching in OpTee-OS /firmware node, /reserved-memory node and possibly also additional /memory@ nodes. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com>
2020-04-11 18:49:49 +00:00
DTC_FLAGS += -R 4 -p 0x1000
endif
ARM: dts: renesas: Add RZ/A1 GR-Peach board Add board code and DTs for Renesas RZ/A1 SoC-based GR-Peach, which is a cheap development platform with RZ/A1H SoC. The DTs are imported from Linux 5.0.11, commit d5a2675b207d . Currently supported are UART, ethernet and RPC SPI. The board can be booted from RPC SPI by writing the u-boot.bin binary to the beginning of the SPI NOR, e.g. using the "sf" command. The board can also be booted via JTAG by setting text base to 0x20020000, loading u-boot.bin there via JTAG and executing it from that address. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-08-23 19:53:59 +00:00
dtb-$(CONFIG_RZA1) += \
r7s72100-gr-peach-u-boot.dtb
ti: keystone: Move away from CONFIG_SOC_KEYSTONE We have individual SOC symbols for each keystone 2 platform. Use the existing CONFIG_ARCH_KEYSTONE rather than CONFIG_SOC_KEYSTONE to encompass all of the keystone families. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-13 00:32:32 +00:00
dtb-$(CONFIG_ARCH_KEYSTONE) += keystone-k2hk-evm.dtb \
ARM: dts: k2*: Rename the k2* files to keystone-k2* files As reported in [1], rename the k2* dts files to keystone-* files this will force consistency throughout. Script for the same (and hand modified for Makefile and config files): for i in arch/arm/dts/k2* do b=`basename $i`; git mv $i arch/arm/dts/keystone-$b; sed -i -e "s/$b/keystone-$b/g" arch/arm/dts/*[si] done This is similar to linux kernel commit 5edafc29829bc ("ARM: dts: k2*: Rename the k2* files to keystone-k2* files") [1] http://marc.info/?l=linux-arm-kernel&m=145637407804754&w=2 Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-01-31 04:02:57 +00:00
keystone-k2l-evm.dtb \
keystone-k2e-evm.dtb \
arm: dts: Add new "generic" 66AK2Gx device tree file. With U-boot runtime board detect for DTB selection a "default" dtb needs to be created. This will be used temporarily until the "proper" dtb is selected. Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-16 22:25:11 +00:00
keystone-k2g-evm.dtb \
ARM: dts: k2g: Add DT support for K2G Industrial Communication Engine evm Add basic DT support for K2G ICE evm. Only minimal peripherals are supported to allow console output and MMC boot. Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-16 22:25:31 +00:00
keystone-k2g-generic.dtb \
keystone-k2g-ice.dtb
ARM: dts: k2hk: Enable OF_CONTROL and DM Import k2hk specific DT files from Linux Kernel and enable OF_CONTROL, DM, DM_SERIAL. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-09-19 09:30:20 +00:00
board: at91sam9261ek: Update to support DT and DM Add the dts files to support deivce tree, update the configuration files to support the device tree and driver model. The peripheral clock and pins configuration are handled by the clock and the pinctrl drivers respectively. Enable the early debug UART to debug problems when an ICE or other debug mechanism is not available. Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-21 05:28:40 +00:00
dtb-$(CONFIG_TARGET_AT91SAM9261EK) += at91sam9261ek.dtb
ARM: fix arch/arm/dts/Makefile Since commit 27cb7300ffda ("Ensure device tree DTS is compiled"), build succeeds irrespective of the correctness of Makefile. In fact, you can compile any defconfig without adding any entry in arch/*/dts/Makefile. As a result, a lot of wrong code have been merged unnoticed. I am going to revert that commit, and lots of hidden issues have come to light: [1] Typos armada-3720-uDPU.dts, sun8i-a83t-tbs-a711.dts use the extension ".dts" instead of ".dtb" [2] DTB is associated to undefined CONFIG option For example, mx6sllevk_defconfig defines CONFIG_MX6SLL, but associates its device tree to CONFIG_MX6SL, which is undefined. [3] Lots of entries are missing Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Chris Packham <judge.packham@gmail.com> [trini: add imx6ul pico dtbs] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-03-14 05:58:33 +00:00
dtb-$(CONFIG_TARGET_PM9261) += at91sam9261ek.dtb
board: pm9263: Update to support DT and DM Update the configuration files to support the device tree and driver model. The peripheral clock and pins configuration are handled by the clock and the pinctrl drivers respectively. Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-21 06:04:47 +00:00
dtb-$(CONFIG_TARGET_PM9263) += at91sam9263ek.dtb
ARM: fix arch/arm/dts/Makefile Since commit 27cb7300ffda ("Ensure device tree DTS is compiled"), build succeeds irrespective of the correctness of Makefile. In fact, you can compile any defconfig without adding any entry in arch/*/dts/Makefile. As a result, a lot of wrong code have been merged unnoticed. I am going to revert that commit, and lots of hidden issues have come to light: [1] Typos armada-3720-uDPU.dts, sun8i-a83t-tbs-a711.dts use the extension ".dts" instead of ".dtb" [2] DTB is associated to undefined CONFIG option For example, mx6sllevk_defconfig defines CONFIG_MX6SLL, but associates its device tree to CONFIG_MX6SL, which is undefined. [3] Lots of entries are missing Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Chris Packham <judge.packham@gmail.com> [trini: add imx6ul pico dtbs] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-03-14 05:58:33 +00:00
dtb-$(CONFIG_TARGET_MEESC) += at91sam9263ek.dtb
ARM: dts: at91: Add dts files for at91sam9263ek The device tree source files of at91sam9263ek boards are copied from the Linux v4.10, do the changes as below. - Add the reg property for the pinctrl node. - Move the gpio (pioA, pioB, pioC, pioD, pioE) nodes as the pinctrl's slibling nodes, instead of the child nodes. - Add the "u-boot,dm-pre-reloc" property for the dbgu node are used in board_init_f stage. - Fix the compilation warnings. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-04-18 05:49:39 +00:00
dtb-$(CONFIG_TARGET_AT91SAM9263EK) += at91sam9263ek.dtb
ARM: dts: at91: Add dts files for at91sam9rlek The device tree source files of at91sam9rlek boards are copied from the Linux v4.10, do the changes as below. - Add the reg property for the pinctrl node. - Move the gpio (pioA, pioB, pioC, pioD) nodes as the pinctrl's slibling nodes, instead of the child nodes. - Add the "u-boot,dm-pre-reloc" property for the dbgu node are used in board_init_f stage. - Fix the compilation warnings. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-04-18 05:49:38 +00:00
dtb-$(CONFIG_TARGET_AT91SAM9RLEK) += at91sam9rlek.dtb
ARM: dts: at91: Add dts files for at91sam9260ek/9g20ek The device tree source files of at91sam9g20ek and at91sam9260ek boards are copied from the Linux v4.10, do the changes below. - Fix the build error for the usb0 node. - Add the reg property for the pinctrl node. - Move the gpio (pioA, pioB, pioC ...) nodes as the pinctrl's slibling nodes, instead of the child nodes. - Add the "u-boot,dm-pre-reloc" property for the dbgu node are used in board_init_f stage. - Add the clk pinctrl of the mmc0 node. - Fix the compilation warnings. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-04-18 05:49:37 +00:00
dtb-$(CONFIG_TARGET_AT91SAM9260EK) += \
at91sam9260ek.dtb \
at91sam9g20ek.dtb \
at91sam9g20ek_2mmc.dtb
ARM: dts: at91: Add dts files for at91sam9m10g45ek The device tree source files of at91sam9m10g45ek boards are copied from the Linux v4.10, do the changes as below. - Add the reg property for the pinctrl node. - Move the gpio (pioA, pioB, pioC, pioD, pioE) nodes as the pinctrl's slibling nodes, instead of the child nodes. - Add the "u-boot,dm-pre-reloc" property to determine which nodes are used by the board_init_f stage. - Fix the compilation warnings. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-04-18 05:49:36 +00:00
dtb-$(CONFIG_TARGET_AT91SAM9M10G45EK) += at91sam9m10g45ek.dtb
board: pm9g45: Migrate to CONFIG_DM Migrate the following options to CONFIG_DM: CONFIG_DM_GPIO CONFIG_DM_MMC CONFIG_DM_ETH CONFIG_DM_SERIAL CONFIG_DM_USB Signed-off-by: Ilko Iliev <iliev@ronetix.at>
2019-04-03 14:50:30 +00:00
dtb-$(CONFIG_TARGET_PM9G45) += at91sam9m10g45ek.dtb
ARM: dts: at91: Add dts files for at91sam9x5ek The device tree source files of at91sam9x5ek board are copied from the Linux v4.10, do the changes below. - Add the reg property for the pinctrl node. - Move the gpio (pioA, pioB, pioC ...) nodes as the pinctrl's slibling nodes, instead of the child nodes. - Add the "u-boot,dm-pre-reloc" property to determine which nodes are used by the board_init_f stage. - Change the compatible of the spi flash to "spi-flash". - Add the spi0 aliases. - Fix the compilation warnings. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-04-18 05:49:34 +00:00
dtb-$(CONFIG_TARGET_AT91SAM9X5EK) += \
at91sam9g15ek.dtb \
at91sam9g25ek.dtb \
at91sam9g35ek.dtb \
at91sam9x25ek.dtb \
at91sam9x35ek.dtb
ARM: dts: Add dts files for sam9x60ek add device tree files for sam9x60ek board with below changes. - Add initial device nodes (pmc, pinctrl, sdhc, dbgu & pit) - Add the reg property for the pinctrl node. - Add the "u-boot,dm-pre-reloc" property to determine which nodes are used by the board_init_f stage. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com> [prasanthi.chellakumar@microchip.com: fix style/whitespace issues] Signed-off-by: Prasanthi Chellakumar <prasanthi.chellakumar@microchip.com> [nicolas.ferre@microchip.com: - fix gclk, - fix pio/pinctrl controller definition and allow to have more than only PIOA for this SoC, - removing pinctrl address] Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> [claudiu.beznea@microchip.com: - use SAM9X60's compatible for pinctrl - add drive strength and slew rate options for SDMMC0 pins.] Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> [tudor.ambarus@microchip.com: - u-boot,dm-pre-reloc property in dedicated file, - fix pit len, starts from 0xFFFFFE40 and it is of len 0x10] Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2019-09-27 13:08:45 +00:00
dtb-$(CONFIG_TARGET_SAM9X60EK) += sam9x60ek.dtb
ARM: dts: Add device tree files for sam9x60_curiosity Add dts and dtsi files. Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com>
2022-04-04 05:53:19 +00:00
dtb-$(CONFIG_TARGET_SAM9X60_CURIOSITY) += at91-sam9x60_curiosity.dtb
ARM: dts: at91: Add dts files for at91sam9n12ek The device tree source files of at91sam9n12ek boards are copied from the Linux v4.10, do the changes as below. - Add the reg property for the pinctrl node. - Move the gpio (pioA, pioB, pioC, pioD) nodes as the pinctrl's slibling nodes, instead of the child nodes. - Change the compatible of the spi flash to "spi-flash". - Add the spi0 aliases. - Fix the pinctrl-names of mmc0 node. - Add the "u-boot,dm-pre-reloc" property to determine which nodes are used by the board_init_f stage. - Fix the compilation warnings. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-04-18 05:49:35 +00:00
dtb-$(CONFIG_TARGET_AT91SAM9N12EK) += at91sam9n12ek.dtb
arm: at91: Add gardena-gateway-at91sam support The GARDENA smart Gateway boards are equipped with an Atmel / Microchip AT91SAM9G25 SoC and with 128 MiB of RAM and 256 MiB of NAND storage. This patch adds support for this board including SPL support. Therefore the AT91Boostrap is not needed on this platform any more. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Andreas Bießmann <andreas@biessmann.org> Cc: Eugen Hristev <eugen.hristev@microchip.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2019-04-02 08:57:27 +00:00
dtb-$(CONFIG_TARGET_GARDENA_SMART_GATEWAY_AT91SAM) += \
at91sam9g25-gardena-smart-gateway.dtb
ARM: fix arch/arm/dts/Makefile Since commit 27cb7300ffda ("Ensure device tree DTS is compiled"), build succeeds irrespective of the correctness of Makefile. In fact, you can compile any defconfig without adding any entry in arch/*/dts/Makefile. As a result, a lot of wrong code have been merged unnoticed. I am going to revert that commit, and lots of hidden issues have come to light: [1] Typos armada-3720-uDPU.dts, sun8i-a83t-tbs-a711.dts use the extension ".dts" instead of ".dtb" [2] DTB is associated to undefined CONFIG option For example, mx6sllevk_defconfig defines CONFIG_MX6SLL, but associates its device tree to CONFIG_MX6SL, which is undefined. [3] Lots of entries are missing Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Chris Packham <judge.packham@gmail.com> [trini: add imx6ul pico dtbs] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-03-14 05:58:33 +00:00
dtb-$(CONFIG_TARGET_ETHERNUT5) += ethernut5.dtb
dtb-$(CONFIG_TARGET_USB_A9263) += usb_a9263.dtb
omap3_logic: Add Device Tree Support and more DM drivers This patch also removes all the excessive code for NS16550 intiailization as the device tree can do that now. This also adds DM_I2C and DM_MMC since the overlying drivers have the built-in support already. The corresponding include/config/omap3_logic.h also reduced in size due to the new device tree support. Signed-off-by: Adam Ford <aford173@gmail.com> Changes in V2: Retain Auto-detect ability between SOM-LV and Torpedo Split this off from the device sub submissions
2017-04-17 13:09:45 +00:00
dtb-$(CONFIG_TARGET_OMAP3_LOGIC) += \
ARM: fix arch/arm/dts/Makefile Since commit 27cb7300ffda ("Ensure device tree DTS is compiled"), build succeeds irrespective of the correctness of Makefile. In fact, you can compile any defconfig without adding any entry in arch/*/dts/Makefile. As a result, a lot of wrong code have been merged unnoticed. I am going to revert that commit, and lots of hidden issues have come to light: [1] Typos armada-3720-uDPU.dts, sun8i-a83t-tbs-a711.dts use the extension ".dts" instead of ".dtb" [2] DTB is associated to undefined CONFIG option For example, mx6sllevk_defconfig defines CONFIG_MX6SLL, but associates its device tree to CONFIG_MX6SL, which is undefined. [3] Lots of entries are missing Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Chris Packham <judge.packham@gmail.com> [trini: add imx6ul pico dtbs] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-03-14 05:58:33 +00:00
logicpd-som-lv-35xx-devkit.dtb \
logicpd-som-lv-37xx-devkit.dtb \
logicpd-torpedo-35xx-devkit.dtb \
logicpd-torpedo-37xx-devkit.dtb
omap3_logic: Add Device Tree Support and more DM drivers This patch also removes all the excessive code for NS16550 intiailization as the device tree can do that now. This also adds DM_I2C and DM_MMC since the overlying drivers have the built-in support already. The corresponding include/config/omap3_logic.h also reduced in size due to the new device tree support. Signed-off-by: Adam Ford <aford173@gmail.com> Changes in V2: Retain Auto-detect ability between SOM-LV and Torpedo Split this off from the device sub submissions
2017-04-17 13:09:45 +00:00
ARM: dts: omap3-evm: Add support for TMDSEVM{3530, 3730} This commit adds OMAP3 EVM devicetree files from Linux v4.15-rc3. Note that this is the first addition of OMAP34XX devicetree files. Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
2017-12-16 20:14:48 +00:00
dtb-$(CONFIG_TARGET_OMAP3_EVM) += \
omap3-evm-37xx.dtb \
omap3-evm.dtb
ARM: dts: omap3-beagle{-xm}: Add support for BeagleBoard This commit adds OMAP3 BeagleBoard devicetree files from Linux v4.15-rc5. This includes standard OMAP34XX board revisions as well as the 'xM' which is OMAP36XX. Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
2017-12-29 16:37:31 +00:00
dtb-$(CONFIG_TARGET_OMAP3_BEAGLE) += \
omap3-beagle-xm-ab.dtb \
omap3-beagle-xm.dtb \
omap3-beagle.dtb
ARM: dts: omap3-devkit8000: Add support for Devkit8000 This commit adds OMAP3 BeagleBoard devicetree files from Linux v5.16.0. This commit fixes CONFIG_DM_MMC warning. v3: patch clean-up Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
2022-06-02 20:27:06 +00:00
dtb-$(CONFIG_TARGET_DEVKIT8000) += omap3-devkit8000.dtb
omap3: igep00x0: Add Device Tree Support and DM_MMC driver This adds device tree for OMAP3 IGEP based boards and the DM_MMC driver. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-27 16:03:30 +00:00
dtb-$(CONFIG_TARGET_OMAP3_IGEP00X0) += \
omap3-igep0020.dtb
omap4: panda: convert to device model Convert omap4 panda to device model. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-06-16 08:03:06 +00:00
dtb-$(CONFIG_TARGET_OMAP4_PANDA) += \
omap4-panda.dtb \
omap4-panda-es.dtb
omap4: sdp: convert to device model Convert omap4 sdp to device model. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-06-16 08:03:08 +00:00
dtb-$(CONFIG_TARGET_OMAP4_SDP4430) += \
omap4-sdp.dtb \
omap4-sdp-es23plus.dtb
board: atmel: sama7g5ek: add initial support for sama7g5ek Add initial support for sama7g5 evaluation kit board. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2020-03-10 09:56:38 +00:00
dtb-$(CONFIG_TARGET_SAMA7G5EK) += \
ARM: dts: at91: rename sama7g5ek.dts to at91-sama7g5ek.dts In Linux this DT file is named at91-sama7g5ek.dts. Rename it accordingly. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2022-03-07 14:29:41 +00:00
at91-sama7g5ek.dtb
board: atmel: sama7g5ek: add initial support for sama7g5ek Add initial support for sama7g5 evaluation kit board. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2020-03-10 09:56:38 +00:00
board: atmel: add sama5d2_ptc_ek board Add the SAMA5D2 PTC EK board and remove the SAMA5D2 PTC ENGI board which was a prototype. Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
2017-11-17 06:57:12 +00:00
dtb-$(CONFIG_TARGET_SAMA5D2_PTC_EK) += \
at91-sama5d2_ptc_ek.dtb
ARM: at91/dt: Add device tree for SAMA5D2 Xplained Add device tree for SAMA5D2 Xplained board. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
2016-07-25 09:46:17 +00:00
dtb-$(CONFIG_TARGET_SAMA5D2_XPLAINED) += \
at91-sama5d2_xplained.dtb
board: atmel: Add SAMA5D27 SOM1 EK board The SAMA5D27-SiP (System in Package) integrates the SAMA5D2 with 1Gbit DDR2-SDRAM in a single package. The SAMA5D27 SOM1 embeds a 64Mbit QSPI flash, KSZ8081 Phy and Mac-address EEPROM. Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-13 06:58:54 +00:00
dtb-$(CONFIG_TARGET_SAMA5D27_SOM1_EK) += \
board: atmel: Add SAMA5D27 giant board Giant board is a tiny SBC based on the Adafruit Feather form factor, created by groboards it contains a SAMA5D2 processor (SAMA5D27), 128 MB of RAM and a microSD card for storage. Signed-off-by: Greg Gallagher <greg@embeddedgreg.com>
2021-01-21 16:55:34 +00:00
at91-sama5d27_som1_ek.dtb \
at91-sama5d27_giantboard.dtb
board: atmel: Add SAMA5D27 SOM1 EK board The SAMA5D27-SiP (System in Package) integrates the SAMA5D2 with 1Gbit DDR2-SDRAM in a single package. The SAMA5D27 SOM1 embeds a 64Mbit QSPI flash, KSZ8081 Phy and Mac-address EEPROM. Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-13 06:58:54 +00:00
board: atmel: add sama5d27_wlsom1_ek board Add support for the SAMA5D27-WLSOM1-EK. It's based on the Microchip WireLess SoM which contains the SAMa5D27 LPDDR2 2Gbits SiP. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> [eugen.hristev@microchip.com]: added u-boot specific dtsi and ported to 2019.10 Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-08-08 07:48:26 +00:00
dtb-$(CONFIG_TARGET_SAMA5D27_WLSOM1_EK) += \
at91-sama5d27_wlsom1_ek.dtb
board: atmel: add SAMA5D2 ICP board The SAMA5D2 ICP Board features the SAMA5D27 SoC, together with QSPI Flash, Wilc3000 wireless device and EtherCat support. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-07-06 08:15:10 +00:00
dtb-$(CONFIG_TARGET_SAMA5D2_ICP) += \
at91-sama5d2_icp.dtb
ARM: at91: dt: add dts files for sama5d3xek board Add the device tree files for sama5d3xek board. The dts files are copied from Linux-4.9, do the changes as below. - add reg property for the pinctrl node. - move the gpio nodes (pioA, pioB, pioC ...) as the pinctrl's slibling nodes. - add the "u-boot,dm-pre-reloc" property to determine which nodes which are needed by SPL and by the board_init_f stage. - fix the compile warning. - add spi0 node aliases. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
2017-03-24 01:18:41 +00:00
dtb-$(CONFIG_TARGET_SAMA5D3XEK) += \
sama5d31ek.dtb \
sama5d33ek.dtb \
sama5d34ek.dtb \
sama5d35ek.dtb \
sama5d36ek.dtb \
sama5d36ek_cmp.dtb
ARM: at91: dt: add dts file for sama5d3 Xplained Add the device tree file for sama5d3 Xplained board. The dts files are copied from the Linux-4.9, do changes as below. - add the "u-boot,dm-pre-reloc" property to determine which nodes which are needed by SPL and by the board_init_f stage. - fix the compile warning. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
2017-03-24 01:18:42 +00:00
dtb-$(CONFIG_TARGET_SAMA5D3_XPLAINED) += \
at91-sama5d3_xplained.dtb
ARM: dts: at91: add dts file for sama5d4ek Add the device tree file for sama5d4ek board. The dts file is copied from Linux-4.4, do the following changes. - add the "u-boot,dm-pre-reloc" property to determine which nodes which are needed by SPL and by the board_init_f stage. - fix the compilation warning. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
2017-03-24 01:18:44 +00:00
dtb-$(CONFIG_TARGET_SAMA5D4EK) += \
at91-sama5d4ek.dtb
ARM: dts: at91: add dts files for sama5d4 Xplained Add the device tree files for sama5d4 Xplained board. The dts files are copied from Linux-4.4, do the following changes. - add reg property for pinctrl node. - move the gpio nodes(pioA, pioB, pioC ...) from the pinctrl child's nodes to its slibling nodes. - add the "u-boot,dm-pre-reloc" property to determine which nodes which are needed by SPL and by the board_init_f stage. - fix the compilation warnings. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
2017-03-24 01:18:43 +00:00
dtb-$(CONFIG_TARGET_SAMA5D4_XPLAINED) += \
at91-sama5d4_xplained.dtb
at91: vinco: Add FDT support Sync DTS from Linux and add FDT support for AT91 vinco board. usb0, usb1, and usb2 nodes removed, since there is no support it. Cc: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-03-14 13:16:36 +00:00
dtb-$(CONFIG_TARGET_VINCO) += \
at91-vinco.dtb
fdt: import bcm283x device tree sources from the linux kernel tree This patch adds device trees for the bcm283x platform to be used with OF_CONTROL. The version 4.8-rc7 of the linux kernel was used as source. Cc: Albert Aribaud <albert.u.boot@aribaud.net> Signed-off-by: Fabian Vogt <fvogt@suse.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-09-26 12:26:47 +00:00
dtb-$(CONFIG_ARCH_BCM283X) += \
bcm2835-rpi-a.dtb \
fdt: update bcm283x device tree sources to Linux 5.1-rc6 state Updating the bcm283x device tree sources adds the device trees for - Raspberry Pi 3 Model A+ - Raspberry Pi 3 Model B+ - Raspberry Pi Compute Module IO board rev1 - Raspberry Pi Compute Module 3 IO board V3.0 - Raspberry Pi Zero Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-04-28 04:46:57 +00:00
bcm2835-rpi-a-plus.dtb \
bcm2835-rpi-b.dtb \
fdt: import bcm283x device tree sources from the linux kernel tree This patch adds device trees for the bcm283x platform to be used with OF_CONTROL. The version 4.8-rc7 of the linux kernel was used as source. Cc: Albert Aribaud <albert.u.boot@aribaud.net> Signed-off-by: Fabian Vogt <fvogt@suse.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-09-26 12:26:47 +00:00
bcm2835-rpi-b-plus.dtb \
bcm2835-rpi-b-rev2.dtb \
fdt: update bcm283x device tree sources to Linux 5.1-rc6 state Updating the bcm283x device tree sources adds the device trees for - Raspberry Pi 3 Model A+ - Raspberry Pi 3 Model B+ - Raspberry Pi Compute Module IO board rev1 - Raspberry Pi Compute Module 3 IO board V3.0 - Raspberry Pi Zero Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-04-28 04:46:57 +00:00
bcm2835-rpi-cm1-io1.dtb \
bcm2835-rpi-zero.dtb \
bcm2835-rpi-zero-w.dtb\
fdt: import bcm283x device tree sources from the linux kernel tree This patch adds device trees for the bcm283x platform to be used with OF_CONTROL. The version 4.8-rc7 of the linux kernel was used as source. Cc: Albert Aribaud <albert.u.boot@aribaud.net> Signed-off-by: Fabian Vogt <fvogt@suse.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-09-26 12:26:47 +00:00
bcm2836-rpi-2-b.dtb \
fdt: update bcm283x device tree sources to Linux 5.1-rc6 state Updating the bcm283x device tree sources adds the device trees for - Raspberry Pi 3 Model A+ - Raspberry Pi 3 Model B+ - Raspberry Pi Compute Module IO board rev1 - Raspberry Pi Compute Module 3 IO board V3.0 - Raspberry Pi Zero Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-04-28 04:46:57 +00:00
bcm2837-rpi-3-a-plus.dtb \
bcm2837-rpi-3-b.dtb \
bcm2837-rpi-3-b-plus.dtb \
arm: rpi: Sync rpi dts files from Linux Sync these files, obtained from Linux v5.15. This adds a devicetree file for rpi_4 which was not there before. Testing shows no change so far as I can see: - boots to U-Boot prompt on rpi0, rpi2 - boots to distro on rpi3 - boots to distro on rpi4 I am assuming that syncing with Linux is safe, but the maintainer should know for sure. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-17 03:59:13 +00:00
bcm2837-rpi-cm3-io3.dtb \
bcm2711-rpi-4-b.dtb
fdt: import bcm283x device tree sources from the linux kernel tree This patch adds device trees for the bcm283x platform to be used with OF_CONTROL. The version 4.8-rc7 of the linux kernel was used as source. Cc: Albert Aribaud <albert.u.boot@aribaud.net> Signed-off-by: Fabian Vogt <fvogt@suse.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-09-26 12:26:47 +00:00
board: Add new Broadcom Northstar board This adds a simple Northstar "BRCMNS" board to be used with the BCM4708x and BCM5301x chips. The main intention is to use this with the D-Link DIR-890L and DIR-885L routers for loading the kernel into RAM from NAND memory using the BCH-1 ECC and using the separately submitted SEAMA load command, so we are currently not adding support for things such as networking. The DTS file is a multiplatform NorthStar board, designed to be usable with several NorthStar designs by avoiding any particulars not related to the operation of U-Boot. If other board need other ECC for example, they need to create a separate DTS file and augment the code, but I don't know if any other users will turn up. Cc: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-04-24 07:38:30 +00:00
dtb-$(CONFIG_TARGET_BCMNS) += ns-board.dtb
board: ns3: add support for Broadcom Northstar 3 Add support for Broadcom Northstar 3 SoC. NS3 is a octo-core 64-bit ARMv8 Cortex-A72 processors targeting a broad range of networking applications. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-15 17:18:55 +00:00
dtb-$(CONFIG_TARGET_BCMNS3) += ns3-board.dtb
arm: bcm7xxx: Add a devicetree file Add an empty devicetree file for these boards. It seems to be possible to obtain a real one from another bootloader called 'bolt' but I will leave this to the maintainer. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-17 03:59:18 +00:00
dtb-$(CONFIG_ARCH_BCMSTB) += bcm7xxx.dtb
arm: bcmbca: introduce the bcmbca architecture and 47622 SOC This is the initial support for Broadcom's ARM-based 47622 SOC. In this change, our first SOC is an armv7 platform called 47622. The initial support includes a bare-bone implementation and dts with ARM PL011 uart. The SOC-specific code resides in arch/arm/mach-bcmbca/<soc> and board related code is in board/broadcom/bcmba. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there. Signed-off-by: William Zhang <william.zhang@broadcom.com> Signed-off-by: Kursad Oney <kursad.oney@broadcom.com> Signed-off-by: Anand Gore <anand.gore@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-05-09 16:28:02 +00:00
dtb-$(CONFIG_BCM47622) += \
bcm947622.dtb
arm: bcmbca: add bcm4908 SoC support BCM4908 is a Broadcom B53 based WLAN AP router SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and Broadcom uart. This SoC is supported in the linux git repository so the dts and dtsi files are stripped down version of linux copies with mininum blocks needed by u-boot. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
2022-08-06 01:34:03 +00:00
dtb-$(CONFIG_BCM4908) += \
bcm94908.dtb
arm: bcmbca: add bcm4912 SoC support BCM4912 is a Broadcom B53 based WLAN AP router SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and ARM PL011 uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
2022-08-06 01:34:01 +00:00
dtb-$(CONFIG_BCM4912) += \
bcm94912.dtb
arm: bcmbca: add bcm63138 SoC support BCM63138 is an ARM A9 based DSL Broadband SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory, ARM A9 global timer and Broadcom uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are stripped down version of linux copies with mininum blocks needed by u-boot. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console. This patch applies on top of the my previous patch [1]. [1] https://lists.denx.de/pipermail/u-boot/2022-August/490570.html Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-08-06 01:25:13 +00:00
dtb-$(CONFIG_BCM63138) += \
bcm963138.dtb
arm: bcmbca: add bcm63146 SoC support BCM63146 is a Broadcom B53 based DSL Broadband SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and ARM PL011 uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
2022-08-06 01:34:00 +00:00
dtb-$(CONFIG_BCM63146) += \
bcm963146.dtb
arm: bcmbca: add bcm63148 SoC support BCM63148 is an Broadcom B15 based DSL Broadband SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and Broadcom uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there. Signed-off-by: William Zhang <william.zhang@broadcom.com>
2022-08-01 18:39:25 +00:00
dtb-$(CONFIG_BCM63148) += \
bcm963148.dtb
arm: bcmbca: add bcm63158 SoC support under CONFIG_ARCH_BCMBCA BCM63158 is a Broadcom B53 based DSL Gateway SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family. Like other Broadband SoC, this patch adds it under CONFIG_BCM63158 chip config and CONFIG_ARCH_BCMBCA platform config. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and ARM PL011 uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-08-22 18:19:44 +00:00
dtb-$(CONFIG_BCM63158) += \
bcm963158.dtb
arm: bcmbca: add bcm63178 SoC support BCM63178 is an ARM A7 based DSL Broadband SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and ARM PL011 uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux with minor fix-up that needs to be upstreamed to linux as well. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there. Signed-off-by: William Zhang <william.zhang@broadcom.com>
2022-08-01 18:39:21 +00:00
dtb-$(CONFIG_BCM63178) += \
bcm963178.dtb
arm: bcmbca: add bcm6756 SoC support BCM6756 is an ARM A7 based WLAN Gateway and Access Point Broadband SoC. It is part of the BCA(Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and ARM PL011 uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there. Signed-off-by: William Zhang <william.zhang@broadcom.com>
2022-08-01 18:39:24 +00:00
dtb-$(CONFIG_BCM6756) += \
bcm96756.dtb
arm: bcmbca: add bcm6813 SoC support BCM6813 is a Broadcom B53 based PON and WLAN AP router SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and ARM PL011 uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
2022-08-06 01:34:02 +00:00
dtb-$(CONFIG_BCM6813) += \
bcm96813.dtb
arm: bcmbca: add bcm6846 SoC support BCM6846 is an ARM A7 based PON Broadband SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and Broadcom uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux with minor fix-up that needs to be upstreamed to linux as well. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there. Signed-off-by: William Zhang <william.zhang@broadcom.com>
2022-08-01 18:39:22 +00:00
dtb-$(CONFIG_BCM6846) += \
bcm96846.dtb
arm: bcmbca: add bcm6855 SoC support under CONFIG_ARCH_BCMBCA BCM6855 is a Broadcom ARM A7 based PON Gateway SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family. Like other broadband SoC, this patch adds it under CONFIG_BCM6855 chip config and CONFIG_ARCH_BCMBCA platform config. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and ARM PL101 uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-08-22 18:49:06 +00:00
dtb-$(CONFIG_BCM6855) += \
arm: bcmbca: remove bcm6753 support under CONFIG_ARCH_BCM6753 BCM6753 is essentially same as the main chip BCM6855 but with different SKU number. Now that BCM6855 is supported under CONFIG_ARCH_BCMBCA and CONFIG_BCM6855, remove the original ARCH_BCM6753 support and migrate its configuration and dts settings. This includes: - Remove the bcm96753ref board folder. It is replaced by the generic bcmbca board folder. - Merge the 6753.dtsi setting to the new 6855.dtsi file. Update 96753ref board dts with the new compatible string. - Delete broadcom_bcm96763ref.h and merge its setting to the new bcm96855.h file. - Delete bcm96753ref_ram_defconfig and use a basic config version of bcm96855_defconfig Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-08-22 18:49:07 +00:00
bcm96855.dtb \
bcm96753ref.dtb
arm: bcmbca: add bcm6856 SoC support under CONFIG_ARCH_BCMBCA BCM6856 is a Broadcom B53 based PON Gateway SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family. Like other Broadband SoC, this patch adds it under CONFIG_BCM6856 chip config and CONFIG_ARCH_BCMBCA platform config. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and Broadcom uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-08-22 18:31:41 +00:00
dtb-$(CONFIG_BCM6856) += \
arm: bcmbca: remove bcm68360 support under CONFIG_ARCH_BCM68360 BCM68360 is a variant within the BCM6856 chip family. Now that BCM6856 is supported under CONFIG_ARCH_BCMBCA and CONFIG_BCM6856, remove the original ARCH_BCM68360 support and migrate its configuration and dts settings. This includes: - Remove the bcm968360bg board folder. It is replaced by the generic bcmbca board folder. - Merge the 68360.dtsi setting to the new 6856.dtsi file. Update board dts with the new compatible string. - Merge broadcom_bcm968360bg.h setting to the new bcm96856.h file. - Remove bcm968360bg_ram_defconfig as a basic config version of bcm96856_defconfig is now added. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-08-22 18:31:42 +00:00
bcm96856.dtb \
bcm968360bg.dtb
arm: bcmbca: add bcm6858 SoC support under CONFIG_ARCH_BCMBCA BCM6858 is a Broadcom B53 based PON Gateway SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family. Like other broadband SoC, this patch adds it under CONFIG_BCM6858 chip config and CONFIG_ARCH_BCMBCA platform config. This initial support includes a bare-bone implementation and the original dts is updated with the one from linux next git repository. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-08-22 18:39:43 +00:00
dtb-$(CONFIG_BCM6858) += \
arm: bcmbca: remove bcm6858 support under CONFIG_ARCH_BCM6858 Now that BCM6858 is supported under CONFIG_ARCH_BCMBCA and CONFIG_BCM6858, remove the original ARCH_BCM6858 support and migrate its configuration and dts settings. This includes: - Remove the bcm968580xref board folder. It is replaced by the generic bcmbca board folder. - Update bcm968580xref board dts with the new compatible string. - Delete broadcom_bcm968580xref.h and merge its setting to the new bcm96858.h file. - Remove bcm968580xref_ram_defconfig as a basic config version of bcm96858_defconfig is now added. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-08-22 18:39:44 +00:00
bcm96858.dtb \
bcm968580xref.dtb
arm: bcmbca: add bcm6878 SoC support BCM6878 is an ARM A7 based PON Broadband SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and ARM PL011 uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux with minor fix-up that needs to be upstreamed to linux as well. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there. Signed-off-by: William Zhang <william.zhang@broadcom.com>
2022-08-01 18:39:23 +00:00
dtb-$(CONFIG_BCM6878) += \
bcm96878.dtb
arm: bcmbca: introduce the bcmbca architecture and 47622 SOC This is the initial support for Broadcom's ARM-based 47622 SOC. In this change, our first SOC is an armv7 platform called 47622. The initial support includes a bare-bone implementation and dts with ARM PL011 uart. The SOC-specific code resides in arch/arm/mach-bcmbca/<soc> and board related code is in board/broadcom/bcmba. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there. Signed-off-by: William Zhang <william.zhang@broadcom.com> Signed-off-by: Kursad Oney <kursad.oney@broadcom.com> Signed-off-by: Anand Gore <anand.gore@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-05-09 16:28:02 +00:00
arm: dts: fix ast2500-evb inclusion for the correct soc family Include ast2500-evb.dtb for CONFIG_ASPEED_AST2500 instead of for all aspeed targets. ast2400 is based on ARM926EJ-S processor (ARMv5-architecture). ast2500 is based on ARM1176JZS processor (ARMv6-architecture). ast2600 is based on Cortex A7 processor (ARMv7-A architecture). Each of the above SOC is using a different ARM CPU(s) with different ARM architecture revision. It is not possible to support all 3 of these families in a single binary. So there is no need to build ast2500-evb.dtb for other SOC families. Signed-off-by: Thirupathaiah Annapureddy <thiruan@linux.microsoft.com>
2020-09-01 20:42:45 +00:00
dtb-$(CONFIG_ASPEED_AST2500) += ast2500-evb.dtb
ARM: dts: aspeed: Add AST2600 SoC support AST2600 is the 7th generation of Aspeed SoC designated for Interated Remote Management Processor. AST2600 has significant performance improvement by integrating 1.2GHz dual-core ARM Cortex A7 (r0p5) CPU with FPU. Most of the controllers are also improved with more features and better performance than preceding AST24xx/AST25xx. Signed-off-by: Chia-Wei, Wang <chiawei_wang@aspeedtech.com> Reviewed-by: Ryan Chen <ryan_chen@aspeedtech.com>
2020-12-14 05:54:27 +00:00
dtb-$(CONFIG_ASPEED_AST2600) += ast2600-evb.dtb
aspeed: Support for ast2500 Eval Board ast2500 Eval Board device tree and board specific configuration. Reviewed-by: Simon Glass <sjg@chromium.org>
2017-01-18 21:44:58 +00:00
STiH410-B2260: Add device tree This device tree has been extracted from v4.9 kernel Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-21 12:37:11 +00:00
dtb-$(CONFIG_ARCH_STI) += stih410-b2260.dtb
arm: dts: stm32mp: add stm32mp13 device tree for U-Boot Compile the device tree of STM32MP13x boards and add the needed U-Boot add-on. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-05-20 16:24:52 +00:00
dtb-$(CONFIG_STM32MP13x) += \
stm32mp135f-dk.dtb
stm32mp1: split board and SOC support for STM32MP15x family Split the board and SOC support for STM32MP15x family and prepare the introduction of new boards with STM32MP15x. This path define the 2 configurations: - STM32MP15x: STM32MP15x soc support (new) - TARGET_ST_STM32MP15x: STMicroelectronics board support (choice) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-01-13 14:17:42 +00:00
dtb-$(CONFIG_STM32MP15x) += \
ARM: dts: stm32: Synchronize DT with kernel one This patch synchronizes U-boot DT with kernel one This is based on https://patchwork.kernel.org/cover/10797115/ This patch adds initial support of STM32MP157 discovery boards: - Add support of stm32mp157a discovery1 board (part number: STM32MP157A-DK1). This board embeds a STM32MP157a SOC with AC package (TFBGA361, 148 ios) and 512MB of DDR3. Several connections are available on this boards: 4*USB2.0, 1*USB2.0 typeC, SDcard, RJ45, HDMI, Arduino connector, ... - Add support of stm32mp157c discovery2 board (part number: STM32MP157C-DK2). This board is a "super-set" of stm32mp157a-dk1. A display panel (otm8009a) and Murata wifi/BT combo is added. Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-02-12 15:50:38 +00:00
stm32mp157a-dk1.dtb \
ARM: dts: stm32: add SCMI version of STM32 boards (DK1/DK2/ED1/EV1) Add a "secure" version of STM32 boards based on SCMI when RCC_TZCR.TZEN=1. Only boards provided by STMicroelectronics are concerned: -STM32MP157A-DK1 -STM32MP157C-DK2 -STM32MP157C-ED1 -STM32MP157C-EV1 The resources secured by RCC_TZCR.TZEN=1 are managed by OP-TEE and the associated SCMI services, reset and clock. These device trees are only supported with stm32mp15_defconfig, with OP-TEE, SCMI and without SPL support. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-07-05 14:55:57 +00:00
stm32mp157a-dk1-scmi.dtb \
board: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0 Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose Carrier board. Genaral features: - Ethernet 10/100 - Wifi/BT - USB Type A/OTG - Audio Out - CAN - LVDS panel connector i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam. i.Core STM32MP1 needs to mount on top of this Carrier board for creating complete i.Core STM32MP1 C.TOUCH 2.0 board. Linux dts commit details: commit <6ca2898df59f> ("ARM: dts: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0") Add support for it. Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-03-16 16:22:04 +00:00
stm32mp157a-icore-stm32mp1-ctouch2.dtb \
board: stm32: Add Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit Engicam EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive Evaluation Board. Genaral features: - LCD 7" C.Touch - microSD slot - Ethernet 1Gb - Wifi/BT - 2x LVDS Full HD interfaces - 3x USB 2.0 - 1x USB 3.0 - HDMI Out - Mini PCIe - MIPI CSI - 2x CAN - Audio Out i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam. i.Core STM32MP1 needs to mount on top of this Evaluation board for creating complete i.Core STM32MP1 EDIMM2.2 Starter Kit. Linux dts commit details: commit <adc0496104b6> ("ARM: dts: stm32: Add Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit") Add support for it. Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-03-16 16:22:03 +00:00
stm32mp157a-icore-stm32mp1-edimm2.2.dtb \
board: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 board MicroDev 2.0 is a general purpose miniature carrier board with CAN, LTE and LVDS panel interfaces. Genaral features: - Ethernet 10/100 - USB Type A - Audio Out - microSD - LVDS panel connector - Wifi/BT (option) - UMTS LTE with sim connector (option) MicroGEA STM32MP1 is a STM32MP157A based Micro SoM. MicroGEA STM32MP1 needs to mount on top of this MicroDev 2.0 board for creating complete MicroGEA STM32MP1 MicroDev 2.0 Carrier board. Linux dts commit details: commit <f838dae7afd0> ("ARM: dts: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 board") Add support for it. Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-03-16 16:22:06 +00:00
stm32mp157a-microgea-stm32mp1-microdev2.0.dtb \
board: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 7" OF 7" OF is a capacitive touch 7" Open Frame panel solutions with - 7" AUO B101AW03 LVDS panel - EDT, FT5526 Touch MicroGEA STM32MP1 is a STM32MP157A based Micro SoM. MicroDev 2.0 is a general purpose miniature carrier board with CAN, LTE and LVDS panel interfaces. MicroGEA STM32MP1 needs to mount on top of MicroDev 2.0 board with pluged 7" OF for creating complete MicroGEA STM32MP1 MicroDev 2.0 7" Open Frame Solution board. Linux dts commit details: commit <1d278204cbaa> ("ARM: dts: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 7" OF") Add support for it. Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-03-16 16:22:07 +00:00
stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dtb \
ARM: dts: stm32: Synchronize DT with kernel one This patch synchronizes U-boot DT with kernel one This is based on https://patchwork.kernel.org/cover/10797115/ This patch adds initial support of STM32MP157 discovery boards: - Add support of stm32mp157a discovery1 board (part number: STM32MP157A-DK1). This board embeds a STM32MP157a SOC with AC package (TFBGA361, 148 ios) and 512MB of DDR3. Several connections are available on this boards: 4*USB2.0, 1*USB2.0 typeC, SDcard, RJ45, HDMI, Arduino connector, ... - Add support of stm32mp157c discovery2 board (part number: STM32MP157C-DK2). This board is a "super-set" of stm32mp157a-dk1. A display panel (otm8009a) and Murata wifi/BT combo is added. Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-02-12 15:50:38 +00:00
stm32mp157c-dk2.dtb \
ARM: dts: stm32: add SCMI version of STM32 boards (DK1/DK2/ED1/EV1) Add a "secure" version of STM32 boards based on SCMI when RCC_TZCR.TZEN=1. Only boards provided by STMicroelectronics are concerned: -STM32MP157A-DK1 -STM32MP157C-DK2 -STM32MP157C-ED1 -STM32MP157C-EV1 The resources secured by RCC_TZCR.TZEN=1 are managed by OP-TEE and the associated SCMI services, reset and clock. These device trees are only supported with stm32mp15_defconfig, with OP-TEE, SCMI and without SPL support. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-07-05 14:55:57 +00:00
stm32mp157c-dk2-scmi.dtb \
stm32mp1: add support for stm32mp157c-ev1 board Add support of stm32mp157c-ev1, the evaluation board with pmic stpmu1 (ev1 = mother board + daughter ed1) with device tree. EV1 is the selected board by default in basic defconfig. PS: CONFIG_PINCTRL_FULL activation avoid to increase SYS_MALLOC_F_LEN (Early malloc usage: 2034) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-07-09 13:17:22 +00:00
stm32mp157c-ed1.dtb \
ARM: dts: stm32: add SCMI version of STM32 boards (DK1/DK2/ED1/EV1) Add a "secure" version of STM32 boards based on SCMI when RCC_TZCR.TZEN=1. Only boards provided by STMicroelectronics are concerned: -STM32MP157A-DK1 -STM32MP157C-DK2 -STM32MP157C-ED1 -STM32MP157C-EV1 The resources secured by RCC_TZCR.TZEN=1 are managed by OP-TEE and the associated SCMI services, reset and clock. These device trees are only supported with stm32mp15_defconfig, with OP-TEE, SCMI and without SPL support. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-07-05 14:55:57 +00:00
stm32mp157c-ed1-scmi.dtb \
ARM: dts: stm32: Add DH Electronics DHCOM SoM and PDK2 board Add support for DH Electronics DHCOM SoM and PDK2 rev. 400 carrier board. This is an SoM with STM32MP15xx and an evaluation kit. The baseboard provides Ethernet, UART, USB, CAN and optional display. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-01-24 17:39:16 +00:00
stm32mp157c-ev1.dtb \
ARM: dts: stm32: add SCMI version of STM32 boards (DK1/DK2/ED1/EV1) Add a "secure" version of STM32 boards based on SCMI when RCC_TZCR.TZEN=1. Only boards provided by STMicroelectronics are concerned: -STM32MP157A-DK1 -STM32MP157C-DK2 -STM32MP157C-ED1 -STM32MP157C-EV1 The resources secured by RCC_TZCR.TZEN=1 are managed by OP-TEE and the associated SCMI services, reset and clock. These device trees are only supported with stm32mp15_defconfig, with OP-TEE, SCMI and without SPL support. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-07-05 14:55:57 +00:00
stm32mp157c-ev1-scmi.dtb \
ARM: dts: stm32: add seeed studio odyssey-stm32mp157c board This commit adds device tree files supporting SBC from Seeed Studio based on STM32MP157C. This works with generic stm32mp1 config. Right now only booting from SD card is supported. Signed-off-by: Marcin Sloniewski <marcin.sloniewski@gmail.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-08 17:56:22 +00:00
stm32mp157c-odyssey.dtb \
ARM: dts: stm32: Add DHSOM based DRC02 board Add DT for DH DRC02 unit, which is a universal controller device. The system has two ethernet ports, two CANs, RS485 and RS232, USB, capacitive buttons and an OLED display. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-25 14:50:56 +00:00
stm32mp15xx-dhcom-drc02.dtb \
ARM: dts: stm32: Split AV96 into DHCOR SoM and AV96 board The AV96 is in fact an assembly of DH Electronics DHCOR SoM on top of an AV96 reference board. Split the DTs to reflect that and make sure to DHCOR SoM can be reused on other boards easily. It is also highly recommended to configure the board for the DHCOM make stm32mp15_dhcom_basic_defconfig make DEVICE_TREE=stm32mp15xx-dhcor-avenger96 as that permits reusing the board code for the DH components, like accessing and reading out the ethernet MAC from EEPROM. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Patrice Chotard <patrice.chotard@st.com> Change-Id: I7db47280d4eb0d668eb4e006355240271154f97f
2020-03-31 17:51:36 +00:00
stm32mp15xx-dhcom-pdk2.dtb \
ARM: dts: stm32: Add DHCOM based PicoITX board Add DT for DH PicoITX unit, which is a bare-bones carrier board for the DHCOM. The board has ethernet port, USB, CAN, LEDs and a custom board-to-board expansion connector. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-11-03 18:14:58 +00:00
stm32mp15xx-dhcom-picoitx.dtb \
ARM: dts: stm32: Add DHCOR based DRC Compact board Add DT for DH DRC Compact unit, which is a universal controller device. The system has two ethernet ports, one CAN, RS485 and RS232, USB, uSD card slot, eMMC and SDIO Wi-Fi. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-06-13 09:55:21 +00:00
stm32mp15xx-dhcor-avenger96.dtb \
ARM: dts: stm32: Add DHCOR based Testbench board Add DT for DHCOR Testbench board, which is a testbench for testing of DHCOR SoM during manufacturing. This is effectively a trimmed down version of AV96 board with CSI-2 bridge, HDMI bridge, WiFi, Audio and LEDs removed and used as GPIOs instead. Furthermore, the PMIC Buck3 is always configured from PMIC NVM to cater for both 1V8 and 3V3 SoM variant. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-09-26 16:50:00 +00:00
stm32mp15xx-dhcor-drc-compact.dtb \
stm32mp15xx-dhcor-testbench.dtb
dts: add device tree for STM32MP157C-ED1 board Add minimal devicetree for STM32MP157C-ED1 board, with only the devices to allow boot from SDCARD: - RCC for clock and reset - UART4 for console - I2C and PMIC - DDR - SDMMC0 for SDCard Waiting Kernel upstream for alignment. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-12 09:46:17 +00:00
arm: mach-k3: Rename SOC_K3_AM6 to SOC_K3_AM654 The first AM6x device was the AM654x, but being the first we named it just AM6, since more devices have come out with this same prefix we should switch it to the normal convention of using the full name of the first compatibility device the series. This makes what device we are talking about more clear and matches all the K3 devices added since. Signed-off-by: Andrew Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2022-07-15 15:25:27 +00:00
dtb-$(CONFIG_SOC_K3_AM654) += \
arm: dts: Add IOT2050 device tree files Prepares for the addition of the IOT2050 board which is based on the TI AM65x. The board comes in four variants, Basic and Advanced, each as product generation 1 (SR1.0) and 2 (SR2.x), so there are separate dts files needed. Furthermore, the SPL has its own device tree. Based on original board support by Le Jin, Gao Nian and Chao Zeng. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2021-09-18 06:17:52 +00:00
k3-am654-base-board.dtb \
k3-am654-r5-base-board.dtb \
k3-am65-iot2050-spl.dtb \
k3-am6528-iot2050-basic.dtb \
k3-am6528-iot2050-basic-pg2.dtb \
k3-am6548-iot2050-advanced.dtb \
arm: dts: iot2050: Add support for M.2 variant Add support for the M.2 board based on the iot2050 advanced board. The board has two m.2 connectors, one is B-keyed, the other E-keyed. The B-key slot can connect 5G/SSD devices, and E-key can be used for WIFI/BT devices. This variant is covered by PG2 firmware image. Signed-off-by: chao zeng <chao.zeng@siemens.com> [Jan: align DT to kernel, polish wording] Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2023-02-28 18:19:22 +00:00
k3-am6548-iot2050-advanced-pg2.dtb \
iot2050: Add support for configuring M.2 connector The M.2 slots of the related IOT2050 variant need to be configured according to the plugged cards. This tries to detect the card using the M.2 configuration pins of the B-key slot. If that fails, a U-Boot environment variable can be set to configure manually. This variable is write-permitted also in secure boot mode as it is not able to undermine the integrity of the booted system. The configuration is then applied to mux the serdes and to fix up the device tree passed to or loaded by the bootloader. The fix-ups are coming from device tree overlays that are embedded into the firmware image and there also integrity protected. The OS remains free to load a device tree to which they do not apply: U-Boot will not fail to boot in that case. Based on original patch by Chao Zeng. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2023-02-28 18:19:23 +00:00
k3-am6548-iot2050-advanced-m2.dtb \
k3-am6548-iot2050-advanced-m2-bkey-usb3-overlay.dtbo \
k3-am6548-iot2050-advanced-m2-bkey-ekey-pcie-overlay.dtbo
arm: dts: k3-j721e: Add r5 specific dt support Add initial support for dt that runs on r5. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
2019-06-13 04:59:55 +00:00
dtb-$(CONFIG_SOC_K3_J721E) += k3-j721e-common-proc-board.dtb \
arm: dts: k3-j7200: Add dts support Add the basic a72 dts for j7200. Following nodes were supported: - UART - MMC SD - I2C - TISCI communication Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Vishal Mahaveer <vishalm@ti.com> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2020-08-05 17:14:28 +00:00
k3-j721e-r5-common-proc-board.dtb \
arm: dts: k3-j7200: Add R5 specific dts support Add the basic a72 basic dts for j7200. Following nodes were supported: - UART - MMC SD - I2C - TISCI communication - LPDDR with 1600MTs configuration. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2020-08-05 17:14:29 +00:00
k3-j7200-common-proc-board.dtb \
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
k3-j7200-r5-common-proc-board.dtb \
arm: dts: k3-j721e-r5-sk: Add initial R5 specific dts support for j721e-sk Add R5 specific dts for J721E-SK Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:56 +00:00
k3-j721e-sk.dtb \
k3-j721e-r5-sk.dtb
arm: dts: Add support for A72 specific AM68 Starter Kit Base Board The SK architecture comprises of baseboard and a SOM board. The AM68 Starter Kit's baseboard contains most of the actual connectors, power supply etc. The System on Module (SoM) is plugged on to the base board. Therefore, add support for peripherals brought out in the base board. Schematics: https://www.ti.com/lit/zip/SPRR463 Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2023-01-10 15:47:56 +00:00
dtb-$(CONFIG_SOC_K3_J721S2) += k3-am68-sk-base-board.dtb\
arm: dts: k3-am68-sk: Add r5 specific dt support Add initial support for AM68 SK device tree that runs on R5. Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2023-01-10 15:47:57 +00:00
k3-am68-sk-r5-base-board.dtb\
arm: dts: Add support for A72 specific AM68 Starter Kit Base Board The SK architecture comprises of baseboard and a SOM board. The AM68 Starter Kit's baseboard contains most of the actual connectors, power supply etc. The System on Module (SoM) is plugged on to the base board. Therefore, add support for peripherals brought out in the base board. Schematics: https://www.ti.com/lit/zip/SPRR463 Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2023-01-10 15:47:56 +00:00
k3-j721s2-common-proc-board.dtb\
arm: dts: k3-j721s2: Add r5 specific dt support Add initial support for device tree that runs on R5. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
2022-01-25 15:26:43 +00:00
k3-j721s2-r5-common-proc-board.dtb
arm: dts: k3-am642: Add r5 specific dt support Add initial support for dt that runs on r5. Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2021-04-23 16:27:46 +00:00
dtb-$(CONFIG_SOC_K3_AM642) += k3-am642-evm.dtb \
arm: dts: am642-sk: Add initial sk dts AM642 StarterKit (SK) board is a low cost, small form factor board designed for TI’s AM642 SoC. It supports the following interfaces: * 2 GB LPDDR4 RAM * x2 Gigabit Ethernet interfaces capable of working in switch and MAC mode * x1 USB 3.0 Type-A port * x1 UHS-1 capable µSD card slot * 2.4/5 GHz WLAN + Bluetooth 4.2 through WL1837 * 512 Mbit OSPI flash * x2 UART through UART-USB bridge * XDS110 for onboard JTAG debug using USB * Temperature sensors, user push buttons and LEDs * 40-pin Raspberry Pi compatible GPIO header * 24-pin header for peripherals in MCU island (I2C, UART, SPI, IO) * 54-pin header for Programmable Realtime Unit (PRU) IO pins * Interface for remote automation. Includes: * power measurement and reset control * boot mode change Add basic support for AM642 SK. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-05-06 11:14:59 +00:00
k3-am642-r5-evm.dtb \
arm: dts: am642-r5-sk: Add r5 specific dts Add R5 specific dts for AM64 SK Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2021-05-06 11:15:00 +00:00
k3-am642-sk.dtb \
k3-am642-r5-sk.dtb
arm64: dts: k3: Add Support for AM654 SoC Add initial DT support for AM654 EVM that runs on A53. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-08-27 10:29:08 +00:00
arm: dts: Add support for AM62-SK AM62 StarterKit (SK) board is a low cost, small form factor board designed for TI’s AM625 SoC. It supports the following interfaces: * 2 GB DDR4 RAM * x2 Gigabit Ethernet interfaces capable of working in Switch and MAC mode * x1 HDMI Port with audio + x1 OLDI/LVDS Display interface for Dual Display * x1 Headphone Jack * x1 USB2.0 Hub with two Type A host and x1 USB Type-C DRP Port * x1 UHS-1 capable µSD card slot * 2.4/5 GHz WLAN + Bluetooth 4.2 through WL1837 * 512 Mbit OSPI flash * x4 UART through UART-USB bridge * XDS110 for onboard JTAG debug using USB * Temperature sensors, user push buttons and LEDs * 40-pin User Expansion Connector * 24-pin header for peripherals in MCU island (I2C, UART, SPI, IO) * 20-pin header for Programmable Realtime Unit (PRU) IO pins * 15-pin CSI header Add basic support for AM62-SK. To keep the changes to minimum. Only UART And SD are supported at the moment. This should serve as good example for adding new board support based on AM62x SoC Schematics: https://www.ti.com/lit/zip/sprr448 Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2022-05-25 08:08:48 +00:00
dtb-$(CONFIG_SOC_K3_AM625) += k3-am625-sk.dtb \
k3-am625-r5-sk.dtb
arm: dts: introduce am62a7 u-boot dtbs Introduce the base dts files needed for u-boot or to augment the linux dtbs for use in the u-boot-spl and u-boot binaries Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Bryan Brattlof <bb@ti.com>
2022-11-04 00:13:52 +00:00
dtb-$(CONFIG_SOC_K3_AM625) += k3-am62a7-sk.dtb \
k3-am62a7-r5-sk.dtb
arm: dts: MediaTek: add device tree for MT7629 This patch adds MT7629 device tree and the includes it needs. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-15 02:07:50 +00:00
dtb-$(CONFIG_ARCH_MEDIATEK) += \
Add support for MT7622 reference board This adds a general board file based on MT7622 SoCs from MediaTek. This commit is adding the basic boot support for the MT7622 rfb. Signed-off-by: Sam Shih <sam.shih@mediatek.com> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Tested-by: Frank Wunderlich <frank-w@public-files.de>
2020-01-10 08:30:33 +00:00
mt7622-rfb.dtb \
board: mediatek: Add support for UniElec U7623 board This is an MT7623A-based board, very similar to the Banana Pi R2. http://www.unielecinc.com/q/news/cn/p/product/detail.html?qd_guid=OjXwKCaRlN Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2020-07-12 22:33:03 +00:00
mt7623a-unielec-u7623-02-emmc.dtb \
arm: dts: rename mt7622-bpi-r64.dts rename mt7622-bpi-r64.dts to mt7622-bananapi-bpi-r64.dts to follow naming convensions Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
2020-08-20 14:37:56 +00:00
mt7622-bananapi-bpi-r64.dtb \
arm: dts: MediaTek: add device tree for MT7623 This adds device tree for MT7623 development board - Bananapi R2 Detailed hardware information for BPI-R2 which could be found on http://wiki.banana-pi.org/Banana_Pi_BPI-R2. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Tested-by: Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-15 02:07:51 +00:00
mt7623n-bananapi-bpi-r2.dtb \
board: mediatek: Add pumpkin board support The pumpkin board is made by Gossamer Engineering and is using a MediaTek SoC. The board currently comes in two available version: MT8516 SoC and MT8167 SoC. The board provides the following IOs: eMMC, NAND, SD card, USB type-A, Ethernet, Wi-Fi, Bluetooth, Audio (jack out, 2 PDM port, 1 analog in), serial over USB, and an expansion header. Additionally there is a HDMI port, DSI port, and camera port only on the MT8167 version of the board. The board can be powered by battery and/or via a USB Type-C port and is using a PMIC MT6392. The eMMC and NAND are sharing pins and cannot be used together. This commit is adding the basic boot support for the Pumpkin MT8516 board on the eMMC. Signed-off-by: Fabien Parent <fparent@baylibre.com>
2019-07-18 17:08:09 +00:00
mt7629-rfb.dtb \
board: mediatek: add MT7981 reference boards This patch adds general board files based on MT7981 SoCs. MT7981 uses one mmc controller for booting from both SD and eMMC, and the pins of mmc controller are also shared with spi controller. So three configs are need for these boot types: 1. mt7981_rfb_defconfig - SPI-NOR and SPI-NAND 2. mt7981_emmc_rfb_defconfig - eMMC only 3. mt7981_sd_rfb_defconfig - SD only Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2022-09-09 11:59:16 +00:00
mt7981-rfb.dtb \
mt7981-emmc-rfb.dtb \
mt7981-sd-rfb.dtb \
board: mediatek: add Bananapi-R3 devicetree Add board specific devicetree for Bananapi R3 SBC. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
2023-04-11 15:19:46 +00:00
mt7986a-bpi-r3-sd.dtb \
mt7986a-bpi-r3-emmc.dtb \
board: mediatek: add MT7986 reference boards Add general board files based on MT7986 SoCs. MT7986 uses one mmc controller for booting from both SD and eMMC. Both MT7986A and MT7986B use the same pins for spi controller. Configs for various boot types: 1. mt7986_rfb_defconfig - SPI-NOR and SPI-NAND for MT7986A/B 2. mt7986a_bpir3_emmc_defconfig - eMMC for MT7986A only 3. mt7986a_bpir3_sd_defconfig - SD for MT7986A only Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2022-09-09 11:59:13 +00:00
mt7986a-rfb.dtb \
mt7986b-rfb.dtb \
mt7986a-sd-rfb.dtb \
mt7986b-sd-rfb.dtb \
mt7986a-emmc-rfb.dtb \
mt7986b-emmc-rfb.dtb \
board: Add MT8183 pumpkin board support Add the MT8183 pumpkin board support. Signed-off-by: Fabien Parent <fparent@baylibre.com>
2021-02-15 18:21:12 +00:00
mt8183-pumpkin.dtb \
ARM: MediaTek: add basic support for MT8512 boards This adds a general board file based on MT8512 SoCs from MediaTek. Apart from the generic parts (cpu) we add some low level init codes and initialize the early clocks. This commit is adding the basic boot support for the MT8512 eMMC board. Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2019-12-31 03:29:26 +00:00
mt8512-bm1-emmc.dtb \
ARM: MediaTek: add basic support for MT8518 boards This adds a general board file based on MT8518 SoCs from MediaTek. Apart from the generic parts (cpu) we add some low level init codes and initialize the early clocks. This commit is adding the basic boot support for the MT8518 eMMC board. Signed-off-by: mingming lee <mingming.lee@mediatek.com> [trini: Migrate env location to defconfig, set ENV_IS_IN_MMC] Signeed-off-by: Tom Rini <trini@konsulko.com>
2019-11-07 11:28:44 +00:00
mt8516-pumpkin.dtb \
mt8518-ap1-emmc.dtb
arm: dts: MediaTek: add device tree for MT7629 This patch adds MT7629 device tree and the includes it needs. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-15 02:07:50 +00:00
arm: nuvoton: Add support for Nuvoton NPCM750 BMC Add basic support for the Nuvoton NPCM750 EVB (Poleg). Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
2022-04-19 05:32:19 +00:00
dtb-$(CONFIG_ARCH_NPCM7xx) += nuvoton-npcm750-evb.dtb
arm: nuvoton: Add support for Nuvoton NPCM845 BMC Add basic support for the Nuvoton NPCM845 EVB (Arbel). Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
2022-09-27 08:45:15 +00:00
dtb-$(CONFIG_ARCH_NPCM8XX) += nuvoton-npcm845-evb.dtb
arm: xenguest_arm64: Add a empty devicetree file Add an empty version of this file, so that we can at least build this board when devicetrees are required. The real devicetree is created by the Xen project on-the-fly. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-17 03:59:15 +00:00
dtb-$(CONFIG_XEN) += xenguest-arm64.dtb
arm: octeontx: Add an empty devicetree file Add an empty file to prevent build errors when building with CONFIG_OF_SEPARATE enabled. Unfortunately there are no build instructions in the U-Boot tree to enable a real file to be created. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-17 03:59:16 +00:00
dtb-$(CONFIG_ARCH_OCTEONTX) += octeontx.dtb
dtb-$(CONFIG_ARCH_OCTEONTX2) += octeontx.dtb
board: ge: bx50v3: sync devicetrees from Linux Copy device trees from linux, keeping them as separate files for each board to ease future sync. Update board code to use generic bx50v3 dt initially, then select the specific dt based on board detection. Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2019-11-12 19:15:11 +00:00
dtb-$(CONFIG_TARGET_GE_BX50V3) += \
imx6q-bx50v3.dtb \
imx6q-b850v3.dtb \
imx6q-b650v3.dtb \
imx6q-b450v3.dtb
board: ge: b1x5v2: Add GE B1x5v2 and B1x5Pv2 GE B1x5v2 patient monitor series is similar to the CARESCAPE Monitor series (GE Bx50). It consists of a carrier PCB used in combination with a Congatec QMX6 SoM. This adds U-Boot support using device model everywhere and SPL for memory initialization. Proper configuration is provided as 'ge_b1x5v2_defconfig' and the combined image u-boot-with-spi.imx can be flashed directly to 1024 byte offset to /dev/mtdblock0. Alternatively SPL and u-boot.imx can be loaded separately via USB-OTG using e.g. imx_usb. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-09-02 17:31:46 +00:00
dtb-$(CONFIG_TARGET_GE_B1X5V2) += imx6dl-b1x5v2.dtb
board: ge: ppd: Enable CONFIG_DM Add simplified, generalised, ppd device tree and enable CONFIG_DM. Signed-off-by: Ian Ray <ian.ray@ge.com>
2019-01-31 14:21:15 +00:00
dtb-$(CONFIG_TARGET_MX53PPD) += imx53-ppd.dtb
board: ge: bx50v3: Enable CONFIG_DM Add simplified, generalised, bx50v3 device tree and enable CONFIG_DM. Signed-off-by: Ian Ray <ian.ray@ge.com>
2019-01-31 14:21:11 +00:00
arm: vexpress: Add a devicetree files for juno Sync these file, obtained from Linux v5.15. Add a note for the maintainer, and SPDX lines where they are missing. The added lines are: SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause Note, this matches the text in those files, but is not the same as the GPL-2.0 of some files. [1] https://releases.linaro.org/android/reference-lcr/juno/7.1-17.05/ Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2021-12-17 03:59:14 +00:00
# TODO(Linus Walleij <linus.walleij@linaro.org>): Should us a single vexpress
# Kconfig option to build all of these. See examples above.
ARM: vexpress_ca9x4: Reintroduce board in order to use with QEMU. vexpress_ca9x4 is seemingly the only board except for qemu_arm which is able to run U-Boot correctly, using the `-M vexpress-a9` option to QEMU. Building for qemu_arm and running qemu-system-arm with the `-M virt` argument has a number of downsides, most importantly that it only supports virtio storage drivers. This significantly reduces its usefulness in testing memory card and Flash solutions, especially when the tested images are from a third party source. So therefore we reintroduce the vexpress_ca9x4 board in this commit, with the explicit goal of using it with QEMU. A number of differences to note from the original: * Since the board was apparently unmaintained, I have now set myself as the maintainer. * The board has been converted to use the driver model, which was the reason it was removed in the first place. * The vexpress_ca15_tc2 and vexpress_ca5x2 boards, which were removed in the same commit, are not necessary for the QEMU use case, and have been omitted. * An `mmc0` alias was introduced in the dts file. The mmc is not detected correctly without this, now that it's based on the device tree instead of the board's init function. * A couple of other nodes were removed because they were problematic when trying to run the UEFI bootmgr. Once again, the primary use case here is QEMU, and these nodes are not needed for that to work. * Unnecessary board init code has been removed, thanks to driver model and device tree. * `CONFIG_OF_EMBED` has been enabled. I know this goes against recommended practice, but there doesn't seem to be any other way to pass the dtb to U-Boot in the QEMU scenario. Using the -dtb argument does not work, I suppose because U-Boot doesn't use the same mechanics as the kernel when it's booting. * Load addresses have been changed to fit QEMU use case. People wanting to get a more detailed, yet somewhat isolated, diff between this and the original, can run this command: git diff c6c26a05b89f25a06e7562f8c2071b60fd0c9eac~1 -- \ $( git diff-tree --diff-filter=A -r --name-only HEAD~1 HEAD) (Make sure to either check out this commit first, or replace HEAD with the commit ID of this commit) Signed-off-by: Kristian Amlie <kristian.amlie@northern.tech>
2021-09-07 06:37:51 +00:00
dtb-$(CONFIG_TARGET_VEXPRESS_CA9X4) += vexpress-v2p-ca9.dtb
vexpress64: fvp: enable OF_CONTROL The FVP base model is relying on a DT for Linux operation, so there is no reason we would need to rely on hardcoded information for U-Boot. Letting U-Boot use a DT will open up the usage of actual peripherals, beyond the support for semihosting only. Enable OF_CONTROL in the Kconfig, and use the latest dts files from Linux. Depending on whether we use the boot-wrapper or TF-A, there is already a DTB provided or not, respectively. To cover the boot-wrapper, we add an arm64 Linux kernel header, which allows the boot-wrapper to treat U-Boot like a Linux kernel. U-Boot will find the pointer to the DTB in x0, and will use it. Even though TF-A carries a DT, at the moment this is not made available to non-secure world, so to not break users, we use the U-Boot provided DTB copy in that case. For some reason TF-A puts some DT like structure at the address x0 is pointing at, but that is very small and doesn't carry any hardware information. Make the code to ignore those small DTBs. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-03-04 16:30:11 +00:00
dtb-$(CONFIG_TARGET_VEXPRESS64_BASE_FVP) += fvp-base-revc.dtb
vexpress64: Add ARMv8R-64 board variant The ARMv8-R64 architecture introduces optional VMSA (paging based MMU) support in the EL1/0 translation regime, which makes that part mostly compatible to ARMv8-A. Add a new board variant to describe the "BASE-R64" FVP model, which inherits a lot from the existing v8-A FVP support. One major difference is that the memory map in "inverted": DRAM starts at 0x0, MMIO is at 2GB [1]. * Create new TARGET_VEXPRESS64_BASER_FVP target, sharing most of the exising configuration. * Implement inverted memory map in vexpress_aemv8.h * Create vexpress_aemv8r defconfig * Provide an MMU memory map for the BASER_FVP * Update vexpress64 documentation At the moment the boot-wrapper is the only supported secure firmware. As there is no official DT for the board yet, we rely on it being supplied by the boot-wrapper into U-Boot, so use OF_HAS_PRIOR_STAGE, and go with a dummy DT for now. [1] https://developer.arm.com/documentation/100964/1114/Base-Platform/Base---memory/BaseR-Platform-memory-map Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com> [Andre: rebase and add Linux kernel header] Signed-off-by: Andre Przywara <andre.przywara@arm.com> [trini: Add MAINTAINERS entry for Peter]
2022-03-04 16:30:18 +00:00
dtb-$(CONFIG_TARGET_VEXPRESS64_BASER_FVP) += arm_fvp.dtb
arm: vexpress: Add a devicetree files for juno Sync these file, obtained from Linux v5.15. Add a note for the maintainer, and SPDX lines where they are missing. The added lines are: SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause Note, this matches the text in those files, but is not the same as the GPL-2.0 of some files. [1] https://releases.linaro.org/android/reference-lcr/juno/7.1-17.05/ Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2021-12-17 03:59:14 +00:00
dtb-$(CONFIG_TARGET_VEXPRESS64_JUNO) += juno-r2.dtb
ARM: vexpress_ca9x4: Reintroduce board in order to use with QEMU. vexpress_ca9x4 is seemingly the only board except for qemu_arm which is able to run U-Boot correctly, using the `-M vexpress-a9` option to QEMU. Building for qemu_arm and running qemu-system-arm with the `-M virt` argument has a number of downsides, most importantly that it only supports virtio storage drivers. This significantly reduces its usefulness in testing memory card and Flash solutions, especially when the tested images are from a third party source. So therefore we reintroduce the vexpress_ca9x4 board in this commit, with the explicit goal of using it with QEMU. A number of differences to note from the original: * Since the board was apparently unmaintained, I have now set myself as the maintainer. * The board has been converted to use the driver model, which was the reason it was removed in the first place. * The vexpress_ca15_tc2 and vexpress_ca5x2 boards, which were removed in the same commit, are not necessary for the QEMU use case, and have been omitted. * An `mmc0` alias was introduced in the dts file. The mmc is not detected correctly without this, now that it's based on the device tree instead of the board's init function. * A couple of other nodes were removed because they were problematic when trying to run the UEFI bootmgr. Once again, the primary use case here is QEMU, and these nodes are not needed for that to work. * Unnecessary board init code has been removed, thanks to driver model and device tree. * `CONFIG_OF_EMBED` has been enabled. I know this goes against recommended practice, but there doesn't seem to be any other way to pass the dtb to U-Boot in the QEMU scenario. Using the -dtb argument does not work, I suppose because U-Boot doesn't use the same mechanics as the kernel when it's booting. * Load addresses have been changed to fit QEMU use case. People wanting to get a more detailed, yet somewhat isolated, diff between this and the original, can run this command: git diff c6c26a05b89f25a06e7562f8c2071b60fd0c9eac~1 -- \ $( git diff-tree --diff-filter=A -r --name-only HEAD~1 HEAD) (Make sure to either check out this commit first, or replace HEAD with the commit ID of this commit) Signed-off-by: Kristian Amlie <kristian.amlie@northern.tech>
2021-09-07 06:37:51 +00:00
board: armltd: Add support for Total Compute platform Total Compute is based on ARM architecture and has the following features enabled in u-boot: - PL011 UART - PL180 MMC - NOR Flash - FIT image with Signature - AVB Signed-off-by: Usama Arif <usama.arif@arm.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-08-12 15:12:53 +00:00
dtb-$(CONFIG_TARGET_TOTAL_COMPUTE) += total_compute.dtb
arm: add initial support for the Phytium Durian Board This adds platform code and the device tree for the Phytium Durian Board. The initial support comprises the UART and the PCIE. Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Kever Yang <kever.yang@rock-chips.com> Cc: Tom Rini <trini@konsulko.com> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Steven Hao <liuhao@phytium.com.cn>
2019-10-31 07:51:08 +00:00
dtb-$(CONFIG_TARGET_DURIAN) += phytium-durian.dtb
arm: add initial support for the Phytium Pomelo Board This adds platform code and the device tree for the Phytium Pomelo Board. The initial support comprises the UART and the PCIE. Signed-off-by: weichangzheng <nicholas_zheng@outlook.com>
2022-03-02 07:09:05 +00:00
dtb-$(CONFIG_TARGET_POMELO) += phytium-pomelo.dtb
arm: add initial support for the Phytium Durian Board This adds platform code and the device tree for the Phytium Durian Board. The initial support comprises the UART and the PCIE. Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Kever Yang <kever.yang@rock-chips.com> Cc: Tom Rini <trini@konsulko.com> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Steven Hao <liuhao@phytium.com.cn>
2019-10-31 07:51:08 +00:00
board: presidio-asic: Add basic G3 engr. development board support Add basic Presidio G3 engineering board support Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
2020-01-30 20:34:59 +00:00
dtb-$(CONFIG_TARGET_PRESIDIO_ASIC) += ca-presidio-engboard.dtb
ARM: dts: Add device tree files for hpe gxp soc The HPE SoC is new to linux. A basic device tree layout with minimum required for linux to boot including a timer and watchdog support has been created. The dts file is empty at this point but will be updated in subsequent updates as board specific features are enabled. Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
2022-06-08 21:21:39 +00:00
dtb-$(CONFIG_TARGET_GXP) += hpe-bmc-dl360gen10.dts
arm: dts: imx8mm-cl-iot-gate: add Compulab's ied overlays add the following overlays: - IED extension board - CAN/TPM/ADC extension board on IED board. Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il> Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Cc: uboot-imx <uboot-imx@nxp.com>
2021-11-05 09:13:24 +00:00
dtb-$(CONFIG_TARGET_IMX8MM_CL_IOT_GATE) += imx8mm-cl-iot-gate.dtb \
imx8mm-cl-iot-gate-ied.dtbo \
imx8mm-cl-iot-gate-ied-adc0.dtbo \
imx8mm-cl-iot-gate-ied-adc1.dtbo \
imx8mm-cl-iot-gate-ied-can0.dtbo \
imx8mm-cl-iot-gate-ied-can1.dtbo \
imx8mm-cl-iot-gate-ied-tpm0.dtbo \
imx8mm-cl-iot-gate-ied-tpm1.dtbo
dtb-$(CONFIG_TARGET_IMX8MM_CL_IOT_GATE_OPTEE) += imx8mm-cl-iot-gate-optee.dtb \
imx8mm-cl-iot-gate-ied.dtbo \
imx8mm-cl-iot-gate-ied-adc0.dtbo \
imx8mm-cl-iot-gate-ied-adc1.dtbo \
imx8mm-cl-iot-gate-ied-can0.dtbo \
imx8mm-cl-iot-gate-ied-can1.dtbo \
imx8mm-cl-iot-gate-ied-tpm0.dtbo \
imx8mm-cl-iot-gate-ied-tpm1.dtbo
imx8mm-cl-iot-gate: Split the defconfigs Currently imx8mm-cl-iot-gate_defconfig fails to produce a working boot binary due to the lack of fip.bin: " BINMAN all Image 'main-section' is missing external blobs and is non-functional: blob-ext Some images are invalid" To make the build process more consistent with the other i.MX8M targets, split the defconfig in two: - imx8mm-cl-iot-gate_defconfig: standard defconfig that only requires ATF / DDR firmware. - imx8mm-cl-iot-gate-optee_defconfig: "more advanced" defconfig that requires ATF / Optee / mbedtls / DDR firmware. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
2021-08-24 00:11:09 +00:00
arm: imx8m: add support for Advantech RSB-3720 Add initial support for Advantech RSB-3720 board. The initial support includes: - MMC - eMMC - I2C - FEC - Serial console Signed-off-by: Darren Huang <darren.huang@advantech.com.tw> Signed-off-by: Kevin12.Chen <Kevin12.Chen@advantech.com.tw> Signed-off-by: Phill.Liu <Phill.Liu@advantech.com.tw> Signed-off-by: Tim Liang <tim.liang@advantech.com.tw> Signed-off-by: wei.zeng <wei.zeng@advantech.com.cn> Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Cc: uboot-imx <uboot-imx@nxp.com> Cc: Peng Fan (OSS) <peng.fan@oss.nxp.com>
2022-02-08 01:22:38 +00:00
ifneq ($(CONFIG_TARGET_IMX8MP_RSB3720A1_4G)$(CONFIG_TARGET_IMX8MP_RSB3720A1_6G),)
dtb-y += imx8mp-rsb3720-a1.dtb
endif
arm: lpc32xx: add EA LPC3250 DevKitv2 board support Add basic support for running U-Boot on the Embedded Artists LPC3250 Developer's Kit v2 board by launching U-Boot from the board's s1l loader (which comes pre-installed on the board). Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2021-06-11 02:37:04 +00:00
dtb-$(CONFIG_TARGET_EA_LPC3250DEVKITV2) += lpc3250-ea3250.dtb
arm: qemu: Add a devicetree file for qemu_arm64 virt This uses QEMU virt which creates its own devicetree. Add an empty version of this file, so that we can at least build this board when devicetrees are required. Tested-by: Heinrich Schuchardt <heinrich.schuchardt@canaonical.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-17 03:59:11 +00:00
dtb-$(CONFIG_ARCH_QEMU) += qemu-arm.dtb qemu-arm64.dtb
arm: qemu: Add a devicetree file for qemu_arm This uses QEMU virt which creates its own devicetree. Add an empty version of this file, so that we can at least build this board when devicetrees are required. Tested-by: Heinrich Schuchardt <heinrich.schuchardt@canaonical.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-17 03:59:10 +00:00
arm: add support to corstone1000 platform Corstone1000 is a platform from arm, which includes pre verified Corstone SSE710 sub-system that combines Cortex-A and Cortex-M processors [0]. This code adds the support for the Cortex-A35 implementation at host side, it contains also the necessary bits to support the Corstone 1000 FVP (Fixed Virtual Platform) [1] and also the FPGA MPS3 board implementation of this platform. [2] 0: https://developer.arm.com/documentation/102360/0000 1: https://developer.arm.com/tools-and-software/open-source-software/arm-platforms-software/arm-ecosystem-fvps 2: https://developer.arm.com/documentation/dai0550/c/ Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2022-05-11 09:55:41 +00:00
dtb-$(CONFIG_TARGET_CORSTONE1000) += corstone1000-mps3.dtb \
corstone1000-fvp.dtb
dts: automatically build necessary .dtb files When building for a custom board, it is quite common to maintain a private branch which include some defconfig and .dts files. But to hook up those .dts files requires modifying a file "belonging" to upstream U-Boot, the arch/*/dts/Makefile. Forward-porting that branch to a newer upstream then often results in a conflict which, while it is trivial to resolve by hand, makes it harder to have a CI do "try to build our board against latest upstream". The .config usually includes information on precisely what .dtb(s) are needed, so to avoid having to modify the Makefile, simply add the files in (SPL_)OF_LIST to dtb-y. A technicality is that (SPL_)OF_LIST is not always defined, so rework the Kconfig symbols so that (SPL_)OF_LIST is always defined (when (SPL_)OF_CONTROL), but only prompted for in the cases which used to be their "depends on". nios2 and microblaze already have something like this in their dts/Makefile, and the rationale in commit 41f59f68539 is similar to the above. So this simply generalizes existing practice. Followup patches could remove the logic in those two makefiles, just as there's potential for moving some common boilerplate from all the arch/*/dts/Makefile files to the new scripts/Makefile.dts. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-01-10 13:34:41 +00:00
include $(srctree)/scripts/Makefile.dts
dts: generate multiple device tree blobs It is convenient to have all device trees on the same SoC compiled. It allows for later easy repackaging without the need to re-run the make file. - Build device trees with the same SoC under arch/$(ARCH)/dts - Copy the one specified by CONFIG_DEFAULT_DEVICE_TREE or DEVICE_TREE=... to dts/dt.dtb Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-05 02:28:27 +00:00
targets += $(dtb-y)
fdt: arm: Drop device tree padding The 4KB padding doesn't seem necessary since we don't normally adjust the control device tree file within U-Boot. Also drop the memory table space. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-05-12 20:55:03 +00:00
# Add any required device tree compiler flags here
arm64: dts: Make sure that all DTBs are 64bit aligned Start of DTB should be 64bit aligned that's why also make sure that end is also 64bit aligned. It is not required but it is nice thing to do. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-08-19 09:29:41 +00:00
DTC_FLAGS += -a 0x8
dts: generate multiple device tree blobs It is convenient to have all device trees on the same SoC compiled. It allows for later easy repackaging without the need to re-run the make file. - Build device trees with the same SoC under arch/$(ARCH)/dts - Copy the one specified by CONFIG_DEFAULT_DEVICE_TREE or DEVICE_TREE=... to dts/dt.dtb Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-05 02:28:27 +00:00
PHONY += dtbs
dtbs: $(addprefix $(obj)/, $(dtb-y))
@:
ARM: dt: Also clean dtbo files dtbo files can be also generated that's why also clean them. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-08-26 10:25:30 +00:00
clean-files := *.dtb *.dtbo *_HS
Reference in a new issue Copy permalink