mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-09-21 07:01:57 +00:00
arm: am437x: cm-t43: Add device tree, enable OF_CONTROL
Add device tree from Linux for driver model conversion and enable OF_CONTROL. This will remove the following compile warning: ================================================== Device Tree Source is not correctly specified. Please define 'CONFIG_DEFAULT_DEVICE_TREE' or build with 'DEVICE_TREE=<device_tree>' argument =================================================== Target was compile tested, build was clean. Signed-off-by: Suniel Mahesh <sunil.m@techveda.org>
This commit is contained in:
parent
62a9620135
commit
d60eb8e49e
3 changed files with 424 additions and 1 deletions
|
@ -302,7 +302,8 @@ dtb-$(CONFIG_AM33XX) += \
|
|||
dtb-$(CONFIG_AM43XX) += am437x-gp-evm.dtb am437x-sk-evm.dtb \
|
||||
am43x-epos-evm.dtb \
|
||||
am437x-idk-evm.dtb \
|
||||
am4372-generic.dtb
|
||||
am4372-generic.dtb \
|
||||
am437x-cm-t43.dtb
|
||||
dtb-$(CONFIG_TARGET_AM3517_EVM) += am3517-evm.dtb
|
||||
dtb-$(CONFIG_TI816X) += dm8168-evm.dtb
|
||||
dtb-$(CONFIG_THUNDERX) += thunderx-88xx.dtb
|
||||
|
|
420
arch/arm/dts/am437x-cm-t43.dts
Normal file
420
arch/arm/dts/am437x-cm-t43.dts
Normal file
|
@ -0,0 +1,420 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-only
|
||||
/*
|
||||
* Copyright (C) 2015 CompuLab, Ltd. - http://www.compulab.co.il/
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/pinctrl/am43xx.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include "am4372.dtsi"
|
||||
|
||||
/ {
|
||||
model = "CompuLab CM-T43";
|
||||
compatible = "compulab,am437x-cm-t43", "ti,am4372", "ti,am43";
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
ledb {
|
||||
label = "cm-t43:green";
|
||||
gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
};
|
||||
|
||||
vmmc_3v3: fixedregulator-v3_3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vmmc_3v3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
enable-active-high;
|
||||
};
|
||||
};
|
||||
|
||||
&am43xx_pinmux {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&cm_t43_led_pins>;
|
||||
|
||||
cm_t43_led_pins: cm_t43_led_pins {
|
||||
pinctrl-single,pins = <
|
||||
AM4372_IOPAD(0xa78, MUX_MODE7)
|
||||
>;
|
||||
};
|
||||
|
||||
i2c0_pins: i2c0_pins {
|
||||
pinctrl-single,pins = <
|
||||
AM4372_IOPAD(0x988, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
|
||||
AM4372_IOPAD(0x98c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
|
||||
>;
|
||||
};
|
||||
|
||||
emmc_pins: emmc_pins {
|
||||
pinctrl-single,pins = <
|
||||
AM4372_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad8.mmc1_dat0 */
|
||||
AM4372_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad9.mmc1_dat1 */
|
||||
AM4372_IOPAD(0x828, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad10.mmc1_dat2 */
|
||||
AM4372_IOPAD(0x82c, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad11.mmc1_dat3 */
|
||||
AM4372_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad12.mmc1_dat4 */
|
||||
AM4372_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad13.mmc1_dat5 */
|
||||
AM4372_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad14.mmc1_dat6 */
|
||||
AM4372_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad15.mmc1_dat7 */
|
||||
AM4372_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
|
||||
AM4372_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
|
||||
>;
|
||||
};
|
||||
|
||||
spi0_pins: pinmux_spi0_pins {
|
||||
pinctrl-single,pins = <
|
||||
AM4372_IOPAD(0x950, PIN_INPUT | MUX_MODE0) /* spi0_sclk.spi0_sclk */
|
||||
AM4372_IOPAD(0x954, PIN_INPUT | MUX_MODE0) /* spi0_d0.spi0_d0 */
|
||||
AM4372_IOPAD(0x958, PIN_OUTPUT | MUX_MODE0) /* spi0_d1.spi0_d1 */
|
||||
AM4372_IOPAD(0x95C, PIN_OUTPUT | MUX_MODE0) /* spi0_cs0.spi0_cs0 */
|
||||
>;
|
||||
};
|
||||
|
||||
nand_flash_x8: nand_flash_x8 {
|
||||
pinctrl-single,pins = <
|
||||
AM4372_IOPAD(0x800, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
|
||||
AM4372_IOPAD(0x804, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
|
||||
AM4372_IOPAD(0x808, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
|
||||
AM4372_IOPAD(0x80c, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
|
||||
AM4372_IOPAD(0x810, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
|
||||
AM4372_IOPAD(0x814, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
|
||||
AM4372_IOPAD(0x818, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
|
||||
AM4372_IOPAD(0x81c, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
|
||||
AM4372_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)
|
||||
AM4372_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE0)
|
||||
AM4372_IOPAD(0x87c, PIN_OUTPUT_PULLUP | MUX_MODE0)
|
||||
AM4372_IOPAD(0x898, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
|
||||
AM4372_IOPAD(0x894, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
|
||||
AM4372_IOPAD(0x890, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
|
||||
AM4372_IOPAD(0x89c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
|
||||
>;
|
||||
};
|
||||
|
||||
cpsw_default: cpsw_default {
|
||||
pinctrl-single,pins = <
|
||||
/* Slave 1 */
|
||||
AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_txen */
|
||||
AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rxctl */
|
||||
AM4372_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd3 */
|
||||
AM4372_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd2 */
|
||||
AM4372_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd1 */
|
||||
AM4372_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd0 */
|
||||
AM4372_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rmii1_tclk */
|
||||
AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */
|
||||
AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd3 */
|
||||
AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd2 */
|
||||
AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd1 */
|
||||
AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd0 */
|
||||
AM4372_IOPAD(0xa74, MUX_MODE3)
|
||||
/* Slave 2 */
|
||||
AM4372_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.txen */
|
||||
AM4372_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rxctl */
|
||||
AM4372_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.txd3 */
|
||||
AM4372_IOPAD(0x84c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.txd2 */
|
||||
AM4372_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.txd1 */
|
||||
AM4372_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.txd0 */
|
||||
AM4372_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.tclk */
|
||||
AM4372_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rclk */
|
||||
AM4372_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rxd3 */
|
||||
AM4372_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rxd2 */
|
||||
AM4372_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rxd1 */
|
||||
AM4372_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rxd0 */
|
||||
AM4372_IOPAD(0xa38, MUX_MODE7)
|
||||
>;
|
||||
};
|
||||
|
||||
davinci_mdio_default: davinci_mdio_default {
|
||||
pinctrl-single,pins = <
|
||||
/* MDIO */
|
||||
AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
|
||||
AM4372_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&gpmc {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&nand_flash_x8>;
|
||||
ranges = <0 0 0x08000000 0x1000000>;
|
||||
nand@0,0 {
|
||||
compatible = "ti,omap2-nand";
|
||||
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
|
||||
interrupt-parent = <&gpmc>;
|
||||
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
|
||||
<1 IRQ_TYPE_NONE>; /* termcount */
|
||||
ti,nand-ecc-opt = "bch8";
|
||||
ti,elm-id = <&elm>;
|
||||
|
||||
nand-bus-width = <8>;
|
||||
gpmc,device-width = <1>;
|
||||
gpmc,sync-clk-ps = <0>;
|
||||
gpmc,cs-on-ns = <0>;
|
||||
gpmc,cs-rd-off-ns = <44>;
|
||||
gpmc,cs-wr-off-ns = <44>;
|
||||
gpmc,adv-on-ns = <6>;
|
||||
gpmc,adv-rd-off-ns = <34>;
|
||||
gpmc,adv-wr-off-ns = <44>;
|
||||
gpmc,we-on-ns = <0>;
|
||||
gpmc,we-off-ns = <40>;
|
||||
gpmc,oe-on-ns = <0>;
|
||||
gpmc,oe-off-ns = <54>;
|
||||
gpmc,access-ns = <64>;
|
||||
gpmc,rd-cycle-ns = <82>;
|
||||
gpmc,wr-cycle-ns = <82>;
|
||||
gpmc,bus-turnaround-ns = <0>;
|
||||
gpmc,cycle2cycle-delay-ns = <0>;
|
||||
gpmc,clk-activation-ns = <0>;
|
||||
gpmc,wr-access-ns = <40>;
|
||||
gpmc,wr-data-mux-bus-ns = <0>;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
/* MTD partition table */
|
||||
partition@0 {
|
||||
label = "kernel";
|
||||
reg = <0x0 0x00980000>;
|
||||
};
|
||||
partition@980000 {
|
||||
label = "dtb";
|
||||
reg = <0x00980000 0x00080000>;
|
||||
};
|
||||
partition@a00000 {
|
||||
label = "rootfs";
|
||||
reg = <0x00a00000 0x0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0_pins>;
|
||||
clock-frequency = <100000>;
|
||||
|
||||
tps65218: tps65218@24 {
|
||||
compatible = "ti,tps65218";
|
||||
reg = <0x24>;
|
||||
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* NMIn */
|
||||
interrupt-parent = <&gic>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
|
||||
dcdc1: regulator-dcdc1 {
|
||||
regulator-name = "vdd_core";
|
||||
regulator-min-microvolt = <912000>;
|
||||
regulator-max-microvolt = <1144000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
dcdc2: regulator-dcdc2 {
|
||||
regulator-name = "vdd_mpu";
|
||||
regulator-min-microvolt = <912000>;
|
||||
regulator-max-microvolt = <1378000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
dcdc3: regulator-dcdc3 {
|
||||
regulator-name = "vdcdc3";
|
||||
regulator-suspend-enable;
|
||||
regulator-min-microvolt = <1500000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
dcdc5: regulator-dcdc5 {
|
||||
regulator-name = "v1_0bat";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
dcdc6: regulator-dcdc6 {
|
||||
regulator-name = "v1_8bat";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo1: regulator-ldo1 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
|
||||
eeprom_module: at24@50 {
|
||||
compatible = "atmel,24c02";
|
||||
reg = <0x50>;
|
||||
pagesize = <16>;
|
||||
};
|
||||
};
|
||||
|
||||
&gpio0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpio1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpio2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpio3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpio4 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpio5 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mmc2 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&emmc_pins>;
|
||||
vmmc-supply = <&vmmc_3v3>;
|
||||
bus-width = <8>;
|
||||
ti,non-removable;
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi0_pins>;
|
||||
dmas = <&edma 16 0
|
||||
&edma 17 0>;
|
||||
dma-names = "tx0", "rx0";
|
||||
|
||||
flash: w25q64cvzpig@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <20000000>;
|
||||
partition@0 {
|
||||
label = "uboot";
|
||||
reg = <0x0 0xc0000>;
|
||||
};
|
||||
|
||||
partition@c0000 {
|
||||
label = "uboot environment";
|
||||
reg = <0xc0000 0x40000>;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
label = "reserved";
|
||||
reg = <0x100000 0x100000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mac {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&cpsw_default>;
|
||||
dual_emac = <1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&davinci_mdio {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&davinci_mdio_default>;
|
||||
status = "okay";
|
||||
|
||||
ethphy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
ethphy1: ethernet-phy@1 {
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&cpsw_emac0 {
|
||||
phy-handle = <ðphy0>;
|
||||
phy-mode = "rgmii-txid";
|
||||
dual_emac_res_vlan = <1>;
|
||||
};
|
||||
|
||||
&cpsw_emac1 {
|
||||
phy-handle = <ðphy1>;
|
||||
phy-mode = "rgmii-txid";
|
||||
dual_emac_res_vlan = <2>;
|
||||
};
|
||||
|
||||
&dwc3_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2_phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dwc3_2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2_phy2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2 {
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "peripheral", "host", "otg";
|
||||
};
|
||||
|
||||
&elm {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tscadc {
|
||||
status = "okay";
|
||||
tsc {
|
||||
ti,wires = <4>;
|
||||
ti,x-plate-resistance = <200>;
|
||||
ti,coordiante-readouts = <5>;
|
||||
ti,wire-config = <0x00 0x11 0x22 0x33>;
|
||||
};
|
||||
|
||||
adc {
|
||||
ti,adc-channels = <4 5 6 7>;
|
||||
};
|
||||
};
|
||||
|
||||
&cpu {
|
||||
cpu0-supply = <&dcdc2>;
|
||||
operating-points = <1000000 1330000>,
|
||||
<800000 1260000>,
|
||||
<720000 1200000>,
|
||||
<600000 1100000>,
|
||||
<300000 950000>;
|
||||
};
|
|
@ -32,6 +32,8 @@ CONFIG_SPL_POWER_SUPPORT=y
|
|||
CONFIG_SPL_SPI_LOAD=y
|
||||
CONFIG_SYS_SPI_U_BOOT_OFFS=0x40000
|
||||
CONFIG_SYS_PROMPT="CM-T43 # "
|
||||
CONFIG_OF_CONTROL=y
|
||||
CONFIG_DEFAULT_DEVICE_TREE="am437x-cm-t43"
|
||||
CONFIG_CMD_ASKENV=y
|
||||
CONFIG_CMD_EEPROM=y
|
||||
CONFIG_CMD_EEPROM_LAYOUT=y
|
||||
|
|
Loading…
Reference in a new issue