dm: ls1021a: Bring in ls1021a dts files from linux kernel

Bring in required device tree files for ls1021a from Linux.
These are initially unchanged and have a number of pieces not needed by U-Boot.

Signed-off-by: Haikun Wang <Haikun.Wang@freescale.com>
Acked-by: Simon Glass <sjg@chromium.org>
This commit is contained in:
haikun 2015-03-25 20:23:26 +08:00 committed by Simon Glass
parent b6286a1f54
commit ddf79f3623
4 changed files with 662 additions and 0 deletions

View file

@ -54,6 +54,9 @@ dtb-$(CONFIG_SOCFPGA) += \
socfpga_cyclone5_socdk.dtb \
socfpga_cyclone5_socrates.dtb
dtb-$(CONFIG_LS102XA) += ls1021a-qds.dtb \
ls1021a-twr.dtb
targets += $(dtb-y)
DTC_FLAGS += -R 4 -p 0x1000

View file

@ -0,0 +1,201 @@
/*
* Freescale ls1021a QDS board device tree source
*
* Copyright 2013-2015 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
/dts-v1/;
#include "ls1021a.dtsi"
/ {
model = "LS1021A QDS Board";
aliases {
enet0_rgmii_phy = &rgmii_phy1;
enet1_rgmii_phy = &rgmii_phy2;
enet2_rgmii_phy = &rgmii_phy3;
enet0_sgmii_phy = &sgmii_phy1c;
enet1_sgmii_phy = &sgmii_phy1d;
};
};
&dspi0 {
bus-num = <0>;
status = "okay";
dspiflash: at45db021d@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "atmel,at45db021d", "atmel,at45", "atmel,dataflash";
spi-max-frequency = <16000000>;
spi-cpol;
spi-cpha;
reg = <0>;
};
};
&i2c0 {
status = "okay";
pca9547: mux@77 {
reg = <0x77>;
#address-cells = <1>;
#size-cells = <0>;
i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0>;
ds3232: rtc@68 {
compatible = "dallas,ds3232";
reg = <0x68>;
interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
};
};
i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x2>;
ina220@40 {
compatible = "ti,ina220";
reg = <0x40>;
shunt-resistor = <1000>;
};
ina220@41 {
compatible = "ti,ina220";
reg = <0x41>;
shunt-resistor = <1000>;
};
};
i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x3>;
eeprom@56 {
compatible = "atmel,24c512";
reg = <0x56>;
};
eeprom@57 {
compatible = "atmel,24c512";
reg = <0x57>;
};
adt7461a@4c {
compatible = "adi,adt7461a";
reg = <0x4c>;
};
};
};
};
&ifc {
#address-cells = <2>;
#size-cells = <1>;
/* NOR, NAND Flashes and FPGA on board */
ranges = <0x0 0x0 0x0 0x60000000 0x08000000
0x2 0x0 0x0 0x7e800000 0x00010000
0x3 0x0 0x0 0x7fb00000 0x00000100>;
status = "okay";
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
bank-width = <2>;
device-width = <1>;
};
fpga: board-control@3,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
reg = <0x3 0x0 0x0000100>;
bank-width = <1>;
device-width = <1>;
ranges = <0 3 0 0x100>;
mdio-mux-emi1 {
compatible = "mdio-mux-mmioreg";
mdio-parent-bus = <&mdio0>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x54 1>; /* BRDCFG4 */
mux-mask = <0xe0>; /* EMI1[2:0] */
/* Onboard PHYs */
ls1021amdio0: mdio@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
rgmii_phy1: ethernet-phy@1 {
reg = <0x1>;
};
};
ls1021amdio1: mdio@20 {
reg = <0x20>;
#address-cells = <1>;
#size-cells = <0>;
rgmii_phy2: ethernet-phy@2 {
reg = <0x2>;
};
};
ls1021amdio2: mdio@40 {
reg = <0x40>;
#address-cells = <1>;
#size-cells = <0>;
rgmii_phy3: ethernet-phy@3 {
reg = <0x3>;
};
};
ls1021amdio3: mdio@60 {
reg = <0x60>;
#address-cells = <1>;
#size-cells = <0>;
sgmii_phy1c: ethernet-phy@1c {
reg = <0x1c>;
};
};
ls1021amdio4: mdio@80 {
reg = <0x80>;
#address-cells = <1>;
#size-cells = <0>;
sgmii_phy1d: ethernet-phy@1d {
reg = <0x1d>;
};
};
};
};
};
&lpuart0 {
status = "okay";
};
&mdio0 {
tbi0: tbi-phy@8 {
reg = <0x8>;
device_type = "tbi-phy";
};
};
&uart0 {
status = "okay";
};
&uart1 {
status = "okay";
};

View file

@ -0,0 +1,88 @@
/*
* Freescale ls1021a TWR board device tree source
*
* Copyright 2013-2015 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
/dts-v1/;
#include "ls1021a.dtsi"
/ {
model = "LS1021A TWR Board";
aliases {
enet2_rgmii_phy = &rgmii_phy1;
enet0_sgmii_phy = &sgmii_phy2;
enet1_sgmii_phy = &sgmii_phy0;
};
};
&dspi1 {
bus-num = <0>;
status = "okay";
dspiflash: s25fl064k@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spansion,s25fl064k";
spi-max-frequency = <16000000>;
spi-cpol;
spi-cpha;
reg = <0>;
};
};
&i2c0 {
status = "okay";
};
&i2c1 {
status = "okay";
};
&ifc {
#address-cells = <2>;
#size-cells = <1>;
/* NOR Flash on board */
ranges = <0x0 0x0 0x0 0x60000000 0x08000000>;
status = "okay";
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
bank-width = <2>;
device-width = <1>;
};
};
&lpuart0 {
status = "okay";
};
&mdio0 {
sgmii_phy0: ethernet-phy@0 {
reg = <0x0>;
};
rgmii_phy1: ethernet-phy@1 {
reg = <0x1>;
};
sgmii_phy2: ethernet-phy@2 {
reg = <0x2>;
};
tbi1: tbi-phy@1f {
reg = <0x1f>;
device_type = "tbi-phy";
};
};
&uart0 {
status = "okay";
};
&uart1 {
status = "okay";
};

370
arch/arm/dts/ls1021a.dtsi Normal file
View file

@ -0,0 +1,370 @@
/*
* Freescale ls1021a SOC common device tree source
*
* Copyright 2013-2015 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include "skeleton64.dtsi"
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
compatible = "fsl,ls1021a";
interrupt-parent = <&gic>;
aliases {
serial0 = &lpuart0;
serial1 = &lpuart1;
serial2 = &lpuart2;
serial3 = &lpuart3;
serial4 = &lpuart4;
serial5 = &lpuart5;
sysclk = &sysclk;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@f00 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0xf00>;
clocks = <&cluster1_clk>;
};
cpu@f01 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0xf01>;
clocks = <&cluster1_clk>;
};
};
timer {
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
};
pmu {
compatible = "arm,cortex-a7-pmu";
interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
};
soc {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
device_type = "soc";
interrupt-parent = <&gic>;
ranges;
gic: interrupt-controller@1400000 {
compatible = "arm,cortex-a7-gic";
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x0 0x1401000 0x0 0x1000>,
<0x0 0x1402000 0x0 0x1000>,
<0x0 0x1404000 0x0 0x2000>,
<0x0 0x1406000 0x0 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
};
ifc: ifc@1530000 {
compatible = "fsl,ifc", "simple-bus";
reg = <0x0 0x1530000 0x0 0x10000>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
};
dcfg: dcfg@1ee0000 {
compatible = "fsl,ls1021a-dcfg", "syscon";
reg = <0x0 0x1ee0000 0x0 0x10000>;
big-endian;
};
esdhc: esdhc@1560000 {
compatible = "fsl,esdhc";
reg = <0x0 0x1560000 0x0 0x10000>;
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <0>;
voltage-ranges = <1800 1800 3300 3300>;
sdhci,auto-cmd12;
big-endian;
bus-width = <4>;
status = "disabled";
};
scfg: scfg@1570000 {
compatible = "fsl,ls1021a-scfg", "syscon";
reg = <0x0 0x1570000 0x0 0x10000>;
big-endian;
};
clockgen: clocking@1ee1000 {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x1ee1000 0x10000>;
sysclk: sysclk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-output-names = "sysclk";
};
cga_pll1: pll@800 {
compatible = "fsl,qoriq-core-pll-2.0";
#clock-cells = <1>;
reg = <0x800 0x10>;
clocks = <&sysclk>;
clock-output-names = "cga-pll1", "cga-pll1-div2",
"cga-pll1-div4";
};
platform_clk: pll@c00 {
compatible = "fsl,qoriq-core-pll-2.0";
#clock-cells = <1>;
reg = <0xc00 0x10>;
clocks = <&sysclk>;
clock-output-names = "platform-clk", "platform-clk-div2";
};
cluster1_clk: clk0c0@0 {
compatible = "fsl,qoriq-core-mux-2.0";
#clock-cells = <0>;
reg = <0x0 0x10>;
clock-names = "pll1cga", "pll1cga-div2", "pll1cga-div4";
clocks = <&cga_pll1 0>, <&cga_pll1 1>, <&cga_pll1 2>;
clock-output-names = "cluster1-clk";
};
};
dspi0: dspi@2100000 {
compatible = "fsl,vf610-dspi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2100000 0x0 0x10000>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "dspi";
clocks = <&platform_clk 1>;
spi-num-chipselects = <5>;
big-endian;
status = "disabled";
};
dspi1: dspi@2110000 {
compatible = "fsl,vf610-dspi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2110000 0x0 0x10000>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "dspi";
clocks = <&platform_clk 1>;
spi-num-chipselects = <5>;
big-endian;
status = "disabled";
};
i2c0: i2c@2180000 {
compatible = "fsl,vf610-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2180000 0x0 0x10000>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "i2c";
clocks = <&platform_clk 1>;
status = "disabled";
};
i2c1: i2c@2190000 {
compatible = "fsl,vf610-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2190000 0x0 0x10000>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "i2c";
clocks = <&platform_clk 1>;
status = "disabled";
};
i2c2: i2c@21a0000 {
compatible = "fsl,vf610-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x21a0000 0x0 0x10000>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "i2c";
clocks = <&platform_clk 1>;
status = "disabled";
};
uart0: serial@21c0500 {
compatible = "fsl,16550-FIFO64", "ns16550a";
reg = <0x0 0x21c0500 0x0 0x100>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <0>;
fifo-size = <15>;
status = "disabled";
};
uart1: serial@21c0600 {
compatible = "fsl,16550-FIFO64", "ns16550a";
reg = <0x0 0x21c0600 0x0 0x100>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <0>;
fifo-size = <15>;
status = "disabled";
};
uart2: serial@21d0500 {
compatible = "fsl,16550-FIFO64", "ns16550a";
reg = <0x0 0x21d0500 0x0 0x100>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <0>;
fifo-size = <15>;
status = "disabled";
};
uart3: serial@21d0600 {
compatible = "fsl,16550-FIFO64", "ns16550a";
reg = <0x0 0x21d0600 0x0 0x100>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <0>;
fifo-size = <15>;
status = "disabled";
};
lpuart0: serial@2950000 {
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2950000 0x0 0x1000>;
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&sysclk>;
clock-names = "ipg";
status = "disabled";
};
lpuart1: serial@2960000 {
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2960000 0x0 0x1000>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&platform_clk 1>;
clock-names = "ipg";
status = "disabled";
};
lpuart2: serial@2970000 {
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2970000 0x0 0x1000>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&platform_clk 1>;
clock-names = "ipg";
status = "disabled";
};
lpuart3: serial@2980000 {
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2980000 0x0 0x1000>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&platform_clk 1>;
clock-names = "ipg";
status = "disabled";
};
lpuart4: serial@2990000 {
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2990000 0x0 0x1000>;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&platform_clk 1>;
clock-names = "ipg";
status = "disabled";
};
lpuart5: serial@29a0000 {
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x29a0000 0x0 0x1000>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&platform_clk 1>;
clock-names = "ipg";
status = "disabled";
};
wdog0: watchdog@2ad0000 {
compatible = "fsl,imx21-wdt";
reg = <0x0 0x2ad0000 0x0 0x10000>;
interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&platform_clk 1>;
clock-names = "wdog-en";
big-endian;
};
sai1: sai@2b50000 {
compatible = "fsl,vf610-sai";
reg = <0x0 0x2b50000 0x0 0x10000>;
interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&platform_clk 1>;
clock-names = "sai";
dma-names = "tx", "rx";
dmas = <&edma0 1 47>,
<&edma0 1 46>;
big-endian;
status = "disabled";
};
sai2: sai@2b60000 {
compatible = "fsl,vf610-sai";
reg = <0x0 0x2b60000 0x0 0x10000>;
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&platform_clk 1>;
clock-names = "sai";
dma-names = "tx", "rx";
dmas = <&edma0 1 45>,
<&edma0 1 44>;
big-endian;
status = "disabled";
};
edma0: edma@2c00000 {
#dma-cells = <2>;
compatible = "fsl,vf610-edma";
reg = <0x0 0x2c00000 0x0 0x10000>,
<0x0 0x2c10000 0x0 0x10000>,
<0x0 0x2c20000 0x0 0x10000>;
interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "edma-tx", "edma-err";
dma-channels = <32>;
big-endian;
clock-names = "dmamux0", "dmamux1";
clocks = <&platform_clk 1>,
<&platform_clk 1>;
};
mdio0: mdio@2d24000 {
compatible = "gianfar";
device_type = "mdio";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2d24000 0x0 0x4000>;
};
usb@8600000 {
compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
reg = <0x0 0x8600000 0x0 0x1000>;
interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
dr_mode = "host";
phy_type = "ulpi";
};
usb3@3100000 {
compatible = "snps,dwc3";
reg = <0x0 0x3100000 0x0 0x10000>;
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
dr_mode = "host";
};
};
};