verdin-imx8mp: synchronise device tree with linux

Synchronise device tree with linux v5.19-rc5.

Please note that this also means that instead of the previous "generic"
U-Boot specific carrier board agnostic device tree we are now using the
regular one for the Verdin Development (carrier) board (e.g.
imx8mp-verdin-wifi-dev.dtb rather than the previous imx8mp-verdin.dtb).

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
This commit is contained in:
Marcel Ziswiler 2022-07-21 15:46:44 +02:00 committed by Stefano Babic
parent 84c5cd9b84
commit e6ad8070a7
10 changed files with 1709 additions and 649 deletions

View file

@ -967,7 +967,7 @@ dtb-$(CONFIG_ARCH_IMX8M) += \
imx8mp-phyboard-pollux-rdk.dtb \
imx8mp-venice.dtb \
imx8mp-venice-gw74xx.dtb \
imx8mp-verdin.dtb \
imx8mp-verdin-wifi-dev.dtb \
imx8mq-pico-pi.dtb \
imx8mq-kontron-pitx-imx8m.dtb

View file

@ -0,0 +1,129 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright 2022 Toradex
*/
/* TODO: Audio Codec */
&backlight {
power-supply = <&reg_3p3v>;
};
/* Verdin SPI_1 */
&ecspi1 {
status = "okay";
};
/* EEPROM on display adapter boards */
&eeprom_display_adapter {
status = "okay";
};
/* EEPROM on Verdin Development board */
&eeprom_carrier_board {
status = "okay";
};
&eqos {
status = "okay";
};
&flexcan1 {
status = "okay";
};
&flexcan2 {
status = "okay";
};
/* Verdin QSPI_1 */
&flexspi {
status = "okay";
};
/* Current measurement into module VCC */
&hwmon {
status = "okay";
};
&hwmon_temp {
vs-supply = <&reg_1p8v>;
status = "okay";
};
/* Verdin I2C_2_DSI */
&i2c2 {
status = "okay";
};
&i2c3 {
status = "okay";
};
/* Verdin I2C_1 */
&i2c4 {
status = "okay";
/* TODO: Audio Codec */
};
/* TODO: Verdin PCIE_1 */
/* Verdin PWM_1 */
&pwm1 {
status = "okay";
};
/* Verdin PWM_2 */
&pwm2 {
status = "okay";
};
/* Verdin PWM_3_DSI */
&pwm3 {
status = "okay";
};
&reg_usdhc2_vmmc {
vin-supply = <&reg_3p3v>;
};
/* TODO: Verdin I2S_1 */
/* Verdin UART_1 */
&uart1 {
status = "okay";
};
/* Verdin UART_2 */
&uart2 {
status = "okay";
};
/* Verdin UART_3, used as the Linux Console */
&uart3 {
status = "okay";
};
/* Verdin USB_1 */
&usb3_0 {
status = "okay";
};
&usb3_phy0 {
status = "okay";
};
/* Verdin USB_2 */
&usb3_1 {
status = "okay";
};
&usb3_phy1 {
status = "okay";
};
/* Verdin SD_1 */
&usdhc2 {
status = "okay";
};

View file

@ -0,0 +1,46 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright 2022 Toradex
*/
#include "imx8mp-verdin-dahlia.dtsi"
/ {
/* TODO: Audio Codec */
reg_eth2phy: regulator-eth2phy {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio_expander_21 4 GPIO_ACTIVE_HIGH>; /* ETH_PWR_EN */
off-on-delay = <500000>;
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <3300000>;
regulator-name = "+V3.3_ETH";
startup-delay-us = <200000>;
vin-supply = <&reg_3p3v>;
};
};
&fec {
phy-supply = <&reg_eth2phy>;
status = "okay";
};
&gpio_expander_21 {
status = "okay";
vcc-supply = <&reg_1p8v>;
};
/* TODO: Verdin I2C_1 with Audio Codec */
/* Verdin UART_1, connector X50 through RS485 transceiver */
&uart1 {
linux,rs485-enabled-at-boot-time;
rs485-rts-active-low;
rs485-rx-during-tx;
};
/* Limit frequency on dev board due to long traces and bad signal integrity */
&usdhc2 {
max-frequency = <100000000>;
};

View file

@ -20,6 +20,12 @@
};
};
&{/aliases} {
eeprom0 = &eeprom_module;
eeprom1 = &eeprom_carrier_board;
eeprom2 = &eeprom_display_adapter;
};
&clk {
u-boot,dm-pre-reloc;
u-boot,dm-spl;
@ -41,6 +47,15 @@
&gpio2 {
u-boot,dm-spl;
regulator-ethphy {
gpio-hog;
gpios = <20 GPIO_ACTIVE_HIGH>;
line-name = "reg_ethphy";
output-high;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_eth>;
};
};
&gpio3 {
@ -57,6 +72,12 @@
&i2c1 {
u-boot,dm-spl;
eeprom_module: eeprom@50 {
compatible = "i2c-eeprom";
pagesize = <16>;
reg = <0x50>;
};
};
&i2c2 {
@ -67,11 +88,31 @@
u-boot,dm-spl;
};
&i2c4 {
/* EEPROM on display adapter (MIPI DSI Display Adapter) */
eeprom_display_adapter: eeprom@50 {
compatible = "i2c-eeprom";
pagesize = <16>;
reg = <0x50>;
};
/* EEPROM on carrier board */
eeprom_carrier_board: eeprom@57 {
compatible = "i2c-eeprom";
pagesize = <16>;
reg = <0x57>;
};
};
&pca9450 {
u-boot,dm-spl;
};
&pinctrl_i2c1 {
u-boot,dm-spl;
};
&pinctrl_reg_usdhc2_vmmc {
&pinctrl_usdhc2_pwr_en {
u-boot,dm-spl;
u-boot,off-on-delay-us = <20000>;
};
@ -80,7 +121,7 @@
u-boot,dm-spl;
};
&pinctrl_usdhc2_gpio {
&pinctrl_usdhc2_cd {
u-boot,dm-spl;
};
@ -96,10 +137,6 @@
u-boot,dm-spl;
};
&pmic {
u-boot,dm-spl;
};
&reg_usdhc2_vmmc {
u-boot,dm-spl;
};
@ -108,6 +145,10 @@
u-boot,dm-spl;
};
&usdhc1 {
status = "disabled";
};
&usdhc2 {
assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_400M>;
assigned-clock-rates = <400000000>;

View file

@ -0,0 +1,18 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright 2022 Toradex
*/
/dts-v1/;
#include "imx8mp-verdin.dtsi"
#include "imx8mp-verdin-wifi.dtsi"
#include "imx8mp-verdin-dev.dtsi"
/ {
model = "Toradex Verdin iMX8M Plus WB on Verdin Development Board";
compatible = "toradex,verdin-imx8mp-wifi-dev",
"toradex,verdin-imx8mp-wifi",
"toradex,verdin-imx8mp",
"fsl,imx8mp";
};

View file

@ -0,0 +1,82 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright 2022 Toradex
*/
/ {
reg_wifi_en: regulator-wifi-en {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wifi_pwr_en>;
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <3300000>;
regulator-name = "PDn_AW-CM276NF";
startup-delay-us = <2000>;
};
};
&gpio5 {
gpio-line-names = "SODIMM_42",
"SODIMM_46",
"SODIMM_187",
"SODIMM_20",
"SODIMM_22",
"SODIMM_15",
"SODIMM_196",
"SODIMM_200",
"SODIMM_198",
"SODIMM_202",
"",
"",
"",
"",
"",
"",
"SODIMM_55",
"SODIMM_53",
"SODIMM_95",
"SODIMM_93",
"SODIMM_14",
"SODIMM_12",
"SODIMM_129",
"SODIMM_131",
"SODIMM_137",
"SODIMM_139",
"SODIMM_147",
"SODIMM_149",
"SODIMM_151",
"SODIMM_153";
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio1>, <&pinctrl_gpio2>,
<&pinctrl_gpio3>, <&pinctrl_gpio4>,
<&pinctrl_gpio7>, <&pinctrl_gpio8>,
<&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>, <&pinctrl_gpio_hog4>,
<&pinctrl_hdmi_hog>;
};
/* On-module Bluetooth */
&uart4 {
uart-has-rtscts;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_bt_uart>;
status = "okay";
};
/* On-module Wi-Fi */
&usdhc1 {
bus-width = <4>;
keep-power-in-suspend;
max-frequency = <100000000>;
non-removable;
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_wifi_ctrl>;
pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_wifi_ctrl>;
pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_wifi_ctrl>;
vmmc-supply = <&reg_wifi_en>;
status = "okay";
};

View file

@ -1,639 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright 2022 Toradex
*/
/dts-v1/;
#include <dt-bindings/usb/pd.h>
#include "imx8mp.dtsi"
/ {
model = "Toradex Verdin iMX8M Plus";
compatible = "toradex,verdin-imx8mp", "fsl,imx8mp";
aliases {
eeprom0 = &eeprom_module;
eeprom1 = &eeprom_carrier;
eeprom2 = &eeprom_mipi_dsi;
/* Ethernet aliases to ensure correct MAC addresses */
ethernet0 = &eqos;
ethernet1 = &fec;
};
chosen {
bootargs = "console=ttymxc2,115200 earlycon";
stdout-path = &uart3;
};
reg_usb1_host_vbus: regulator-usb1-vbus {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>; /* USB_2_EN */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb1_vbus>;
regulator-always-on;
regulator-max-microvolt = <5000000>;
regulator-min-microvolt = <5000000>;
regulator-name = "usb1_host_vbus";
};
reg_usdhc2_vmmc: regulator-usdhc2 {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio4 22 GPIO_ACTIVE_HIGH>; /* SD_1_PWR_EN */
off-on-delay-us = <12000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <3300000>;
regulator-name = "V3.3_SD";
startup-delay-us = <100>;
};
};
&eqos {
phy-handle = <&ethphy0>;
phy-mode = "rgmii-id";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_eqos>;
status = "okay";
mdio {
compatible = "snps,dwmac-mdio";
#address-cells = <1>;
#size-cells = <0>;
ethphy0: ethernet-phy@7 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <7>;
};
};
};
&fec {
fsl,magic-packet;
phy-handle = <&ethphy1>;
phy-mode = "rgmii-id";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec>;
status = "okay";
mdio {
#address-cells = <1>;
#size-cells = <0>;
ethphy1: ethernet-phy@7 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <7>;
};
};
};
&gpio2 {
regulator-ethphy {
gpio-hog;
gpios = <20 GPIO_ACTIVE_HIGH>;
line-name = "reg_ethphy";
output-high;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_eth>;
};
ctrl_sleep_moci {
gpio-hog;
/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
gpios = <29 GPIO_ACTIVE_HIGH>;
line-name = "CTRL_SLEEP_MOCI#";
output-high;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
};
};
/* Verdin PMIC_I2C */
&i2c1 {
clock-frequency = <400000>;
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
scl-gpios = <&gpio5 14 GPIO_ACTIVE_HIGH>;
sda-gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
status = "okay";
pmic: pca9450@25 {
compatible = "nxp,pca9450c";
reg = <0x25>;
/* PMIC PCA9450 PMIC_nINT GPIO1_IO3 */
regulators {
#address-cells = <1>;
/* Run/Standby voltage */
pca9450,pmic-buck2-dvs-voltage = <950000>, <850000>;
pca9450,pmic-buck2-uses-i2c-dvs;
#size-cells = <0>;
buck1_reg: regulator@0 {
reg = <0>;
regulator-always-on;
regulator-boot-on;
regulator-compatible = "buck1";
regulator-max-microvolt = <2187500>;
regulator-min-microvolt = <600000>;
regulator-ramp-delay = <3125>;
};
buck2_reg: regulator@1 {
reg = <1>;
regulator-always-on;
regulator-boot-on;
regulator-compatible = "buck2";
regulator-max-microvolt = <2187500>;
regulator-min-microvolt = <600000>;
regulator-ramp-delay = <3125>;
};
buck4_reg: regulator@3 {
reg = <3>;
regulator-always-on;
regulator-boot-on;
regulator-compatible = "buck4";
regulator-max-microvolt = <3400000>;
regulator-min-microvolt = <600000>;
};
buck5_reg: regulator@4 {
reg = <4>;
regulator-always-on;
regulator-boot-on;
regulator-compatible = "buck5";
regulator-max-microvolt = <3400000>;
regulator-min-microvolt = <600000>;
};
buck6_reg: regulator@5 {
reg = <5>;
regulator-always-on;
regulator-boot-on;
regulator-compatible = "buck6";
regulator-max-microvolt = <3400000>;
regulator-min-microvolt = <600000>;
};
ldo1_reg: regulator@6 {
reg = <6>;
regulator-always-on;
regulator-boot-on;
regulator-compatible = "ldo1";
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <1600000>;
};
ldo2_reg: regulator@7 {
reg = <7>;
regulator-always-on;
regulator-boot-on;
regulator-compatible = "ldo2";
regulator-max-microvolt = <1150000>;
regulator-min-microvolt = <800000>;
};
ldo3_reg: regulator@8 {
reg = <8>;
regulator-always-on;
regulator-boot-on;
regulator-compatible = "ldo3";
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <800000>;
};
ldo4_reg: regulator@9 {
reg = <9>;
regulator-always-on;
regulator-boot-on;
regulator-compatible = "ldo4";
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <800000>;
};
ldo5_reg: regulator@10 { /* +V3.3_1.8_SD */
reg = <10>;
regulator-compatible = "ldo5";
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <1800000>;
};
};
};
/* Epson RX8130 real time clock on carrier board */
rtc: rx8130@32 {
compatible = "epson,rx8130";
reg = <0x32>;
};
eeprom_module: eeprom@50 {
compatible = "st,24c02", "atmel,24c02", "i2c-eeprom";
pagesize = <16>;
reg = <0x50>;
};
};
/* Verdin I2C2 DSI */
&i2c2 {
clock-frequency = <400000>;
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c2>;
pinctrl-1 = <&pinctrl_i2c2_gpio>;
scl-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>;
sda-gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
status = "okay";
};
/* Verdin I2C4 CSI */
&i2c3 {
clock-frequency = <100000>;
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c3>;
pinctrl-1 = <&pinctrl_i2c3_gpio>;
scl-gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
sda-gpios = <&gpio5 19 GPIO_ACTIVE_HIGH>;
status = "okay";
pca6416: gpio@20 {
compatible = "ti,tca6416";
#gpio-cells = <2>;
gpio-controller;
reg = <0x20>;
};
};
/* Verdin I2C1 */
&i2c4 {
clock-frequency = <100000>;
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c4>;
pinctrl-1 = <&pinctrl_i2c4_gpio>;
scl-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>;
sda-gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>;
status = "okay";
/* EEPROM on MIPI-DSI to HDMI adapter */
eeprom_mipi_dsi: eeprom@50 {
compatible = "st,24c02", "atmel,24c02", "i2c-eeprom";
pagesize = <16>;
reg = <0x50>;
};
/* EEPROM on Verdin Development board */
eeprom_carrier: eeprom@57 {
compatible = "st,24c02", "atmel,24c02", "i2c-eeprom";
pagesize = <16>;
reg = <0x57>;
};
};
&snvs_pwrkey {
status = "okay";
};
/* Verdin UART3 */
&uart3 {
/* console */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
status = "okay";
};
&usb3_phy0 {
status = "okay";
};
&usb_dwc3_0 {
adp-disable;
dr_mode = "otg";
hnp-disable;
srp-disable;
usb-role-switch;
status = "okay";
};
&usb3_phy1 {
status = "okay";
};
&usb_dwc3_1 {
dr_mode = "host";
status = "okay";
};
/* Verdin SDIO 1 */
&usdhc2 {
bus-width = <4>;
cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
vmmc-supply = <&reg_usdhc2_vmmc>;
status = "okay";
};
/* On-module eMMC */
&usdhc3 {
bus-width = <8>;
non-removable;
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc3>;
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
status = "okay";
};
&wdog1 {
fsl,ext-reset-output;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wdog>;
status = "okay";
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio1>, <&pinctrl_gpio2>, <&pinctrl_gpio3>,
<&pinctrl_gpio4>, <&pinctrl_gpio5>, <&pinctrl_gpio6>,
<&pinctrl_gpio7>, <&pinctrl_gpio8>;
pinctrl_ctrl_sleep_moci: ctrlsleepmocigrp {
fsl,pins = <
MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29 0x1c4 /* SODIMM 256 */
>;
};
pinctrl_eqos: eqosgrp {
fsl,pins = <
MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3
MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3
MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91
MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91
MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91
MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91
MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91
MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91
MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f
MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f
MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f
MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f
MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f
MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f
>;
};
pinctrl_fec: fecgrp {
fsl,pins = <
MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02 0x19
MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3
MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x3
MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91
MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91
MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91
MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91
MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91
MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x1f
MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x1f
MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x1f
MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x1f
MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x1f
MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x1f
MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91
>;
};
/* (MEZ_)GPIO_1 shared with (MEZ_)DSI_1_INT# on Verdin Development Board */
pinctrl_gpio1: gpio1grp {
fsl,pins = <
MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00 0x184 /* SODIMM 206 */
>;
};
pinctrl_gpio2: gpio2grp {
fsl,pins = <
MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01 0x184 /* SODIMM 208 */
>;
};
pinctrl_gpio3: gpio3grp {
fsl,pins = <
MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05 0x184 /* SODIMM 210 */
>;
};
pinctrl_gpio4: gpio4grp {
fsl,pins = <
MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x184 /* SODIMM 212 */
>;
};
pinctrl_gpio5: gpio5grp {
fsl,pins = <
MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x184 /* SODIMM 216 */
>;
};
pinctrl_gpio6: gpio6grp {
fsl,pins = <
MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08 0x184 /* SODIMM 218 */
>;
};
pinctrl_gpio7: gpio7grp {
fsl,pins = <
MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03 0x184 /* SODIMM 220 */
>;
};
pinctrl_gpio8: gpio8grp {
fsl,pins = <
MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01 0x184 /* SODIMM 222 */
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c3
MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c3
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c3
MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c3
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c3
MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c3
>;
};
pinctrl_i2c4: i2c4grp {
fsl,pins = <
MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x400001c3
MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x400001c3
>;
};
pinctrl_i2c1_gpio: i2c1grp-gpio {
fsl,pins = <
MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14 0x1c3
MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15 0x1c3
>;
};
pinctrl_i2c2_gpio: i2c2grp-gpio {
fsl,pins = <
MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16 0x1c3
MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17 0x1c3
>;
};
pinctrl_i2c3_gpio: i2c3grp-gpio {
fsl,pins = <
MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18 0x1c3
MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19 0x1c3
>;
};
pinctrl_i2c4_gpio: i2c4grp-gpio {
fsl,pins = <
MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20 0x1c3
MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21 0x1c3
>;
};
pinctrl_reg_eth: regethgrp {
fsl,pins = <
MX8MP_IOMUXC_SD2_WP__GPIO2_IO20 0x184
>;
};
pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc {
fsl,pins = <
MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x41
>;
};
pinctrl_uart3: uart3grp {
fsl,pins = <
MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX 0x49
MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX 0x49
>;
};
pinctrl_usb1_vbus: usb1grp {
fsl,pins = <
MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14 0x19
>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190
MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0
MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0
>;
};
pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
fsl,pins = <
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194
MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4
MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4
>;
};
pinctrl_usdhc2_200mhz: usdhc2grp-200mhz {
fsl,pins = <
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196
MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6
MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6
>;
};
pinctrl_usdhc2_gpio: usdhc2grp-gpio {
fsl,pins = <
MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4
>;
};
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190
MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0
MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0
MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0
MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0
MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0
MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0
MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0
MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x1d1
MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0
MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190
MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0
>;
};
pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
fsl,pins = <
MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194
MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4
MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4
MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4
MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4
MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4
MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4
MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4
MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x1d1
MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4
MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194
MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4
>;
};
pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
fsl,pins = <
MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196
MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6
MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6
MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6
MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6
MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6
MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6
MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6
MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x1d1
MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6
MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196
MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6
>;
};
pinctrl_wdog: wdoggrp {
fsl,pins = <
MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0xc6
>;
};
};

File diff suppressed because it is too large Load diff

View file

@ -1,6 +1,10 @@
Verdin iMX8M Plus
F: arch/arm/dts/imx8mp-verdin.dts
F: arch/arm/dts/imx8mp-verdin-u-boot.dtsi
F: arch/arm/dts/imx8mp-verdin.dtsi
F: arch/arm/dts/imx8mp-verdin-dahlia.dtsi
F: arch/arm/dts/imx8mp-verdin-dev.dtsi
F: arch/arm/dts/imx8mp-verdin-wifi.dtsi
F: arch/arm/dts/imx8mp-verdin-wifi-dev.dts
F: arch/arm/dts/imx8mp-verdin-wifi-dev-u-boot.dtsi
F: board/toradex/verdin-imx8mp/
F: configs/verdin-imx8mp_defconfig
F: doc/board/toradex/verdin-imx8mp.rst

View file

@ -12,7 +12,7 @@ CONFIG_SYS_I2C_MXC_I2C2=y
CONFIG_SYS_I2C_MXC_I2C3=y
CONFIG_SYS_I2C_MXC_I2C4=y
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="imx8mp-verdin"
CONFIG_DEFAULT_DEVICE_TREE="imx8mp-verdin-wifi-dev"
CONFIG_SPL_TEXT_BASE=0x920000
CONFIG_TARGET_VERDIN_IMX8MP=y
CONFIG_SPL_MMC=y