mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-11 07:34:31 +00:00
ARM: dts: stm32: add seeed studio odyssey-stm32mp157c board
This commit adds device tree files supporting SBC from Seeed Studio based on STM32MP157C. This works with generic stm32mp1 config. Right now only booting from SD card is supported. Signed-off-by: Marcin Sloniewski <marcin.sloniewski@gmail.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
This commit is contained in:
Marcin Sloniewski
Patrice Chotard
parent
5f865bb53b
commit
87e1e0fc7f
5 changed files with 709 additions and 0 deletions
|
|
@ -937,6 +937,7 @@ dtb-$(CONFIG_STM32MP15x) += \
|
|||
stm32mp157c-dk2.dtb \
|
||||
stm32mp157c-ed1.dtb \
|
||||
stm32mp157c-ev1.dtb \
|
||||
stm32mp157c-odyssey.dtb \
|
||||
stm32mp15xx-dhcom-pdk2.dtb \
|
||||
stm32mp15xx-dhcor-avenger96.dtb
|
||||
|
||||
|
|
|
|||
125
arch/arm/dts/stm32mp157c-odyssey-som-u-boot.dtsi
Normal file
125
arch/arm/dts/stm32mp157c-odyssey-som-u-boot.dtsi
Normal file
|
|
@ -0,0 +1,125 @@
|
|||
// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
|
||||
/*
|
||||
* Copyright (C) 2020 Marcin Sloniewski <marcin.sloniewski@gmail.com>
|
||||
*/
|
||||
|
||||
#include <dt-bindings/clock/stm32mp1-clksrc.h>
|
||||
#include "stm32mp15-u-boot.dtsi"
|
||||
#include "stm32mp15-ddr3-1x4Gb-1066-binG.dtsi"
|
||||
|
||||
/ {
|
||||
config {
|
||||
u-boot,boot-led = "heartbeat";
|
||||
};
|
||||
};
|
||||
|
||||
&clk_hse {
|
||||
st,digbypass;
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
u-boot,dm-pre-reloc;
|
||||
};
|
||||
|
||||
&i2c2_pins_a {
|
||||
u-boot,dm-pre-reloc;
|
||||
pins {
|
||||
u-boot,dm-pre-reloc;
|
||||
};
|
||||
};
|
||||
|
||||
&pmic {
|
||||
u-boot,dm-pre-reloc;
|
||||
};
|
||||
|
||||
&rcc {
|
||||
st,clksrc = <
|
||||
CLK_MPU_PLL1P
|
||||
CLK_AXI_PLL2P
|
||||
CLK_MCU_PLL3P
|
||||
CLK_PLL12_HSE
|
||||
CLK_PLL3_HSE
|
||||
CLK_PLL4_HSE
|
||||
CLK_RTC_LSE
|
||||
CLK_MCO1_DISABLED
|
||||
CLK_MCO2_DISABLED
|
||||
>;
|
||||
|
||||
st,clkdiv = <
|
||||
1 /*MPU*/
|
||||
0 /*AXI*/
|
||||
0 /*MCU*/
|
||||
1 /*APB1*/
|
||||
1 /*APB2*/
|
||||
1 /*APB3*/
|
||||
1 /*APB4*/
|
||||
2 /*APB5*/
|
||||
23 /*RTC*/
|
||||
0 /*MCO1*/
|
||||
0 /*MCO2*/
|
||||
>;
|
||||
|
||||
st,pkcs = <
|
||||
CLK_CKPER_HSE
|
||||
CLK_FMC_ACLK
|
||||
CLK_QSPI_ACLK
|
||||
CLK_ETH_DISABLED
|
||||
CLK_SDMMC12_PLL4P
|
||||
CLK_DSI_DSIPLL
|
||||
CLK_STGEN_HSE
|
||||
CLK_USBPHY_HSE
|
||||
CLK_SPI2S1_PLL3Q
|
||||
CLK_SPI2S23_PLL3Q
|
||||
CLK_SPI45_HSI
|
||||
CLK_SPI6_HSI
|
||||
CLK_I2C46_HSI
|
||||
CLK_SDMMC3_PLL4P
|
||||
CLK_USBO_USBPHY
|
||||
CLK_ADC_CKPER
|
||||
CLK_CEC_LSE
|
||||
CLK_I2C12_HSI
|
||||
CLK_I2C35_HSI
|
||||
CLK_UART1_HSI
|
||||
CLK_UART24_HSI
|
||||
CLK_UART35_HSI
|
||||
CLK_UART6_HSI
|
||||
CLK_UART78_HSI
|
||||
CLK_SPDIF_PLL4P
|
||||
CLK_FDCAN_PLL4R
|
||||
CLK_SAI1_PLL3Q
|
||||
CLK_SAI2_PLL3Q
|
||||
CLK_SAI3_PLL3Q
|
||||
CLK_SAI4_PLL3Q
|
||||
CLK_RNG1_LSI
|
||||
CLK_RNG2_LSI
|
||||
CLK_LPTIM1_PCLK1
|
||||
CLK_LPTIM23_PCLK3
|
||||
CLK_LPTIM45_LSE
|
||||
>;
|
||||
|
||||
/* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
|
||||
pll2: st,pll@1 {
|
||||
compatible = "st,stm32mp1-pll";
|
||||
reg = <1>;
|
||||
cfg = < 2 65 1 0 0 PQR(1,1,1) >;
|
||||
frac = < 0x1400 >;
|
||||
u-boot,dm-pre-reloc;
|
||||
};
|
||||
|
||||
/* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */
|
||||
pll3: st,pll@2 {
|
||||
compatible = "st,stm32mp1-pll";
|
||||
reg = <2>;
|
||||
cfg = < 1 33 1 16 36 PQR(1,1,1) >;
|
||||
frac = < 0x1a04 >;
|
||||
u-boot,dm-pre-reloc;
|
||||
};
|
||||
|
||||
/* VCO = 594.0 MHz => P = 99, Q = 74, R = 74 */
|
||||
pll4: st,pll@3 {
|
||||
compatible = "st,stm32mp1-pll";
|
||||
reg = <3>;
|
||||
cfg = < 3 98 5 7 7 PQR(1,1,1) >;
|
||||
u-boot,dm-pre-reloc;
|
||||
};
|
||||
};
|
||||
364
arch/arm/dts/stm32mp157c-odyssey-som.dtsi
Normal file
364
arch/arm/dts/stm32mp157c-odyssey-som.dtsi
Normal file
|
|
@ -0,0 +1,364 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
|
||||
/*
|
||||
* Copyright (C) 2020 Marcin Sloniewski <marcin.sloniewski@gmail.com>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "stm32mp157.dtsi"
|
||||
#include "stm32mp15xc.dtsi"
|
||||
#include "stm32mp15-pinctrl.dtsi"
|
||||
#include "stm32mp15xxac-pinctrl.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/mfd/st,stpmic1.h>
|
||||
|
||||
/ {
|
||||
|
||||
model = "Seeed Studio Odyssey-STM32MP157C SOM";
|
||||
compatible = "seeed,odyssey-stm32mp157c-som", "st,stm32mp157";
|
||||
|
||||
memory@c0000000 {
|
||||
device_type = "memory";
|
||||
reg = <0xc0000000 0x20000000>;
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
mcuram2: mcuram2@10000000 {
|
||||
compatible = "shared-dma-pool";
|
||||
reg = <0x10000000 0x40000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
vdev0vring0: vdev0vring0@10040000 {
|
||||
compatible = "shared-dma-pool";
|
||||
reg = <0x10040000 0x1000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
vdev0vring1: vdev0vring1@10041000 {
|
||||
compatible = "shared-dma-pool";
|
||||
reg = <0x10041000 0x1000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
vdev0buffer: vdev0buffer@10042000 {
|
||||
compatible = "shared-dma-pool";
|
||||
reg = <0x10042000 0x4000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
mcuram: mcuram@30000000 {
|
||||
compatible = "shared-dma-pool";
|
||||
reg = <0x30000000 0x40000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
retram: retram@38000000 {
|
||||
compatible = "shared-dma-pool";
|
||||
reg = <0x38000000 0x10000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
gpu_reserved: gpu@d4000000 {
|
||||
reg = <0xd4000000 0x4000000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
optee@de000000 {
|
||||
reg = <0xde000000 0x02000000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
|
||||
led {
|
||||
compatible = "gpio-leds";
|
||||
blue {
|
||||
label = "heartbeat";
|
||||
gpios = <&gpiog 3 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
&gpu {
|
||||
contiguous-area = <&gpu_reserved>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&i2c2_pins_a>;
|
||||
pinctrl-1 = <&i2c2_sleep_pins_a>;
|
||||
i2c-scl-rising-time-ns = <185>;
|
||||
i2c-scl-falling-time-ns = <20>;
|
||||
clock-frequency = <400000>;
|
||||
status = "okay";
|
||||
/* spare dmas for other usage */
|
||||
/delete-property/dmas;
|
||||
/delete-property/dma-names;
|
||||
|
||||
pmic: stpmic@33 {
|
||||
compatible = "st,stpmic1";
|
||||
reg = <0x33>;
|
||||
interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
status = "okay";
|
||||
|
||||
regulators {
|
||||
compatible = "st,stpmic1-regulators";
|
||||
ldo1-supply = <&v3v3>;
|
||||
ldo3-supply = <&vdd_ddr>;
|
||||
ldo6-supply = <&v3v3>;
|
||||
pwr_sw1-supply = <&bst_out>;
|
||||
pwr_sw2-supply = <&bst_out>;
|
||||
|
||||
vddcore: buck1 {
|
||||
regulator-name = "vddcore";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-always-on;
|
||||
regulator-initial-mode = <0>;
|
||||
regulator-over-current-protection;
|
||||
};
|
||||
|
||||
vdd_ddr: buck2 {
|
||||
regulator-name = "vdd_ddr";
|
||||
regulator-min-microvolt = <1350000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-always-on;
|
||||
regulator-initial-mode = <0>;
|
||||
regulator-over-current-protection;
|
||||
};
|
||||
|
||||
vdd: buck3 {
|
||||
regulator-name = "vdd";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
st,mask-reset;
|
||||
regulator-initial-mode = <0>;
|
||||
regulator-over-current-protection;
|
||||
};
|
||||
|
||||
v3v3: buck4 {
|
||||
regulator-name = "v3v3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
regulator-over-current-protection;
|
||||
regulator-initial-mode = <0>;
|
||||
};
|
||||
|
||||
v1v8_audio: ldo1 {
|
||||
regulator-name = "v1v8_audio";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
interrupts = <IT_CURLIM_LDO1 0>;
|
||||
};
|
||||
|
||||
v3v3_hdmi: ldo2 {
|
||||
regulator-name = "v3v3_hdmi";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
interrupts = <IT_CURLIM_LDO2 0>;
|
||||
};
|
||||
|
||||
vtt_ddr: ldo3 {
|
||||
regulator-name = "vtt_ddr";
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-always-on;
|
||||
regulator-over-current-protection;
|
||||
};
|
||||
|
||||
vdd_usb: ldo4 {
|
||||
regulator-name = "vdd_usb";
|
||||
interrupts = <IT_CURLIM_LDO4 0>;
|
||||
};
|
||||
|
||||
vdda: ldo5 {
|
||||
regulator-name = "vdda";
|
||||
regulator-min-microvolt = <2900000>;
|
||||
regulator-max-microvolt = <2900000>;
|
||||
interrupts = <IT_CURLIM_LDO5 0>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
v1v2_hdmi: ldo6 {
|
||||
regulator-name = "v1v2_hdmi";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-always-on;
|
||||
interrupts = <IT_CURLIM_LDO6 0>;
|
||||
};
|
||||
|
||||
vref_ddr: vref_ddr {
|
||||
regulator-name = "vref_ddr";
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
bst_out: boost {
|
||||
regulator-name = "bst_out";
|
||||
interrupts = <IT_OCP_BOOST 0>;
|
||||
};
|
||||
|
||||
vbus_otg: pwr_sw1 {
|
||||
regulator-name = "vbus_otg";
|
||||
interrupts = <IT_OCP_OTG 0>;
|
||||
};
|
||||
|
||||
vbus_sw: pwr_sw2 {
|
||||
regulator-name = "vbus_sw";
|
||||
interrupts = <IT_OCP_SWOUT 0>;
|
||||
regulator-active-discharge = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
onkey {
|
||||
compatible = "st,stpmic1-onkey";
|
||||
interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>;
|
||||
interrupt-names = "onkey-falling", "onkey-rising";
|
||||
power-off-time-sec = <10>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
watchdog {
|
||||
compatible = "st,stpmic1-wdt";
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&ipcc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&iwdg2 {
|
||||
timeout-sec = <32>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&m4_rproc {
|
||||
memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
|
||||
<&vdev0vring1>, <&vdev0buffer>;
|
||||
mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
|
||||
mbox-names = "vq0", "vq1", "shutdown";
|
||||
interrupt-parent = <&exti>;
|
||||
interrupts = <68 1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc2 {
|
||||
pinctrl-names = "default", "opendrain", "sleep";
|
||||
pinctrl-0 = <&sdmmc2_b4_pins_a>;
|
||||
pinctrl-1 = <&sdmmc2_b4_od_pins_a>;
|
||||
pinctrl-2 = <&sdmmc2_b4_sleep_pins_a>;
|
||||
broken-cd;
|
||||
disable-wp;
|
||||
st,neg-edge;
|
||||
bus-width = <4>;
|
||||
vmmc-supply = <&v3v3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&timers1 {
|
||||
/* spare dmas for other usage */
|
||||
/delete-property/dmas;
|
||||
/delete-property/dma-names;
|
||||
status = "disabled";
|
||||
pwm {
|
||||
pinctrl-0 = <&pwm1_pins_a>;
|
||||
pinctrl-1 = <&pwm1_sleep_pins_a>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
status = "okay";
|
||||
};
|
||||
timer@0 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&timers3 {
|
||||
/delete-property/dmas;
|
||||
/delete-property/dma-names;
|
||||
status = "disabled";
|
||||
pwm {
|
||||
pinctrl-0 = <&pwm3_pins_a>;
|
||||
pinctrl-1 = <&pwm3_sleep_pins_a>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
status = "okay";
|
||||
};
|
||||
timer@2 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&timers4 {
|
||||
/delete-property/dmas;
|
||||
/delete-property/dma-names;
|
||||
status = "disabled";
|
||||
pwm {
|
||||
pinctrl-0 = <&pwm4_pins_a &pwm4_pins_b>;
|
||||
pinctrl-1 = <&pwm4_sleep_pins_a &pwm4_sleep_pins_b>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
status = "okay";
|
||||
};
|
||||
timer@3 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&timers5 {
|
||||
/delete-property/dmas;
|
||||
/delete-property/dma-names;
|
||||
status = "disabled";
|
||||
pwm {
|
||||
pinctrl-0 = <&pwm5_pins_a>;
|
||||
pinctrl-1 = <&pwm5_sleep_pins_a>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
status = "okay";
|
||||
};
|
||||
timer@4 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&timers6 {
|
||||
/delete-property/dmas;
|
||||
/delete-property/dma-names;
|
||||
status = "disabled";
|
||||
timer@5 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&timers12 {
|
||||
/delete-property/dmas;
|
||||
/delete-property/dma-names;
|
||||
status = "disabled";
|
||||
pwm {
|
||||
pinctrl-0 = <&pwm12_pins_a>;
|
||||
pinctrl-1 = <&pwm12_sleep_pins_a>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
status = "okay";
|
||||
};
|
||||
timer@11 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&vrefbuf {
|
||||
regulator-min-microvolt = <2500000>;
|
||||
regulator-max-microvolt = <2500000>;
|
||||
vdda-supply = <&vdd>;
|
||||
status = "okay";
|
||||
};
|
||||
58
arch/arm/dts/stm32mp157c-odyssey-u-boot.dtsi
Normal file
58
arch/arm/dts/stm32mp157c-odyssey-u-boot.dtsi
Normal file
|
|
@ -0,0 +1,58 @@
|
|||
// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
|
||||
/*
|
||||
* Copyright (C) 2020 Marcin Sloniewski <marcin.sloniewski@gmail.com>
|
||||
*/
|
||||
|
||||
#include "stm32mp157c-odyssey-som-u-boot.dtsi"
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
mmc0 = &sdmmc1;
|
||||
usb0 = &usbotg_hs;
|
||||
};
|
||||
config {
|
||||
u-boot,boot-led = "heartbeat";
|
||||
u-boot,error-led = "error";
|
||||
};
|
||||
led {
|
||||
red {
|
||||
label = "error";
|
||||
gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&adc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc1 {
|
||||
u-boot,dm-spl;
|
||||
};
|
||||
|
||||
&sdmmc1_b4_pins_a {
|
||||
u-boot,dm-spl;
|
||||
pins1 {
|
||||
u-boot,dm-spl;
|
||||
};
|
||||
pins2 {
|
||||
u-boot,dm-spl;
|
||||
};
|
||||
};
|
||||
|
||||
&uart4 {
|
||||
u-boot,dm-pre-reloc;
|
||||
};
|
||||
|
||||
&uart4_pins_a {
|
||||
u-boot,dm-pre-reloc;
|
||||
pins1 {
|
||||
u-boot,dm-pre-reloc;
|
||||
};
|
||||
pins2 {
|
||||
u-boot,dm-pre-reloc;
|
||||
};
|
||||
};
|
||||
|
||||
161
arch/arm/dts/stm32mp157c-odyssey.dts
Normal file
161
arch/arm/dts/stm32mp157c-odyssey.dts
Normal file
|
|
@ -0,0 +1,161 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
|
||||
/*
|
||||
* Copyright (C) 2020 Marcin Sloniewski <marcin.sloniewski@gmail.com>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "stm32mp157c-odyssey-som.dtsi"
|
||||
|
||||
/ {
|
||||
|
||||
model = "Seeed Studio Odyssey-STM32MP157C Board";
|
||||
compatible = "seeed,odyssey-stm32mp157c", "st,stm32mp157";
|
||||
|
||||
aliases {
|
||||
ethernet0 = ðernet0;
|
||||
serial0 = &uart4;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
led {
|
||||
compatible = "gpio-leds";
|
||||
blue {
|
||||
label = "heartbeat";
|
||||
gpios = <&gpiog 3 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
&adc {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&adc12_ain_pins_a>, <&adc12_usb_cc_pins_a>;
|
||||
vdd-supply = <&vdd>;
|
||||
vdda-supply = <&vdd>;
|
||||
vref-supply = <&vrefbuf>;
|
||||
status = "disabled";
|
||||
adc1: adc@0 {
|
||||
/*
|
||||
* Type-C USB_PWR_CC1 & USB_PWR_CC2 on in18 & in19.
|
||||
* Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C:
|
||||
* 5 * (56 + 47kOhms) * 5pF => 2.5us.
|
||||
* Use arbitrary margin here (e.g. 5us).
|
||||
*/
|
||||
st,min-sample-time-nsecs = <5000>;
|
||||
/* AIN connector, USB Type-C CC1 & CC2 */
|
||||
st,adc-channels = <0 1 6 13 18 19>;
|
||||
status = "okay";
|
||||
};
|
||||
adc2: adc@100 {
|
||||
/* AIN connector, USB Type-C CC1 & CC2 */
|
||||
st,adc-channels = <0 1 2 6 18 19>;
|
||||
st,min-sample-time-nsecs = <5000>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&cec {
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&cec_pins_b>;
|
||||
pinctrl-1 = <&cec_sleep_pins_b>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ðernet0 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <ðernet0_rgmii_pins_a>;
|
||||
pinctrl-1 = <ðernet0_rgmii_sleep_pins_a>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
phy-mode = "rgmii-id";
|
||||
max-speed = <1000>;
|
||||
phy-handle = <&phy0>;
|
||||
|
||||
mdio0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "snps,dwmac-mdio";
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gpu {
|
||||
contiguous-area = <&gpu_reserved>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&i2c1_pins_a>;
|
||||
pinctrl-1 = <&i2c1_sleep_pins_a>;
|
||||
i2c-scl-rising-time-ns = <100>;
|
||||
i2c-scl-falling-time-ns = <7>;
|
||||
status = "okay";
|
||||
/delete-property/dmas;
|
||||
/delete-property/dma-names;
|
||||
};
|
||||
|
||||
&i2s2 {
|
||||
clocks = <&rcc SPI2>, <&rcc SPI2_K>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
|
||||
clock-names = "pclk", "i2sclk", "x8k", "x11k";
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&i2s2_pins_a>;
|
||||
pinctrl-1 = <&i2s2_sleep_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwr_regulators {
|
||||
vdd-supply = <&vdd>;
|
||||
vdd_3v3_usbfs-supply = <&vdd_usb>;
|
||||
};
|
||||
|
||||
&sdmmc1 {
|
||||
pinctrl-names = "default", "opendrain", "sleep";
|
||||
pinctrl-0 = <&sdmmc1_b4_pins_a>;
|
||||
pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
|
||||
pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
|
||||
broken-cd;
|
||||
disable-wp;
|
||||
st,neg-edge;
|
||||
bus-width = <4>;
|
||||
vmmc-supply = <&v3v3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart4 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart4_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbh_ehci {
|
||||
phys = <&usbphyc_port0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbotg_hs {
|
||||
dr_mode = "peripheral";
|
||||
phys = <&usbphyc_port1 0>;
|
||||
phy-names = "usb2-phy";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbphyc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbphyc_port0 {
|
||||
phy-supply = <&vdd_usb>;
|
||||
};
|
||||
|
||||
&usbphyc_port1 {
|
||||
phy-supply = <&vdd_usb>;
|
||||
};
|
||||
|
||||
Loading…
Reference in a new issue