mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-10 15:14:43 +00:00
sunxi: add support for Banana Pi M2 Zero board
Banana Pi M2 Zero is a board by Sinovoip with Allwinner H2+ SoC, 16-bit 512MiB DDR3 memory, a MicroSD slot, two MicroUSB ports (one OTG and one powering-only) and a miniHDMI port. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Jun Nie <jun.nie@linaro.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> [jagan: Fixed board MAINTAINERS file] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
This commit is contained in:
Jun Nie
Jagan Teki
parent
454cf76184
commit
7bb0d212f2
4 changed files with 140 additions and 0 deletions
|
|
@ -365,6 +365,7 @@ dtb-$(CONFIG_MACH_SUN8I_A83T) += \
|
|||
sun8i-a83t-cubietruck-plus.dtb \
|
||||
sun8i-a83t-tbs-a711.dts
|
||||
dtb-$(CONFIG_MACH_SUN8I_H3) += \
|
||||
sun8i-h2-plus-bananapi-m2-zero.dtb \
|
||||
sun8i-h2-plus-libretech-all-h3-cc.dtb \
|
||||
sun8i-h2-plus-orangepi-r1.dtb \
|
||||
sun8i-h2-plus-orangepi-zero.dtb \
|
||||
|
|
|
|||
121
arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts
Normal file
121
arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts
Normal file
|
|
@ -0,0 +1,121 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
|
||||
*
|
||||
* Based on sun8i-h3-bananapi-m2-plus.dts, which is:
|
||||
* Copyright (C) 2016 Chen-Yu Tsai <wens@csie.org>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "sun8i-h3.dtsi"
|
||||
#include "sunxi-common-regulators.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
model = "Banana Pi BPI-M2-Zero";
|
||||
compatible = "sinovoip,bpi-m2-zero", "allwinner,sun8i-h2-plus";
|
||||
|
||||
aliases {
|
||||
serial0 = &uart0;
|
||||
serial1 = &uart1;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
|
||||
pwr_led {
|
||||
label = "bananapi-m2-zero:red:pwr";
|
||||
gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
|
||||
default-state = "on";
|
||||
};
|
||||
};
|
||||
|
||||
gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-names = "default";
|
||||
|
||||
sw4 {
|
||||
label = "power";
|
||||
linux,code = <BTN_0>;
|
||||
gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
wifi_pwrseq: wifi_pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
pinctrl-names = "default";
|
||||
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
|
||||
};
|
||||
};
|
||||
|
||||
&ehci0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mmc0 {
|
||||
vmmc-supply = <®_vcc3v3>;
|
||||
bus-width = <4>;
|
||||
/*
|
||||
* On the production batch of this board the card detect GPIO is
|
||||
* high active (card inserted), although on the early samples it's
|
||||
* low active.
|
||||
*/
|
||||
cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mmc1 {
|
||||
vmmc-supply = <®_vcc3v3>;
|
||||
vqmmc-supply = <®_vcc3v3>;
|
||||
mmc-pwrseq = <&wifi_pwrseq>;
|
||||
bus-width = <4>;
|
||||
non-removable;
|
||||
status = "okay";
|
||||
|
||||
brcmf: wifi@1 {
|
||||
reg = <1>;
|
||||
compatible = "brcm,bcm4329-fmac";
|
||||
interrupt-parent = <&pio>;
|
||||
interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
|
||||
interrupt-names = "host-wake";
|
||||
};
|
||||
};
|
||||
|
||||
&ohci0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_otg {
|
||||
dr_mode = "otg";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbphy {
|
||||
usb0_id_det-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
|
||||
/*
|
||||
* There're two micro-USB connectors, one is power-only and another is
|
||||
* OTG. The Vbus of these two connectors are connected together, so
|
||||
* the external USB device will be powered just by the power input
|
||||
* from the power-only USB port.
|
||||
*/
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -149,6 +149,11 @@ S: Maintained
|
|||
F: configs/Bananapi_m2m_defconfig
|
||||
F: arch/arm/dts/sun8i-r16-bananapi-m2m.dts
|
||||
|
||||
BANANAPI M2 ZERO BOARD
|
||||
M: Icenowy Zheng <icenowy@aosc.io>
|
||||
S: Maintained
|
||||
F: configs/bananapi_m2_zero_defconfig
|
||||
|
||||
BANANAPI M64
|
||||
M: Jagan Teki <jagan@amarulasolutions.com>
|
||||
S: Maintained
|
||||
|
|
|
|||
13
configs/bananapi_m2_zero_defconfig
Normal file
13
configs/bananapi_m2_zero_defconfig
Normal file
|
|
@ -0,0 +1,13 @@
|
|||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_SUNXI=y
|
||||
CONFIG_SPL=y
|
||||
CONFIG_MACH_SUN8I_H3=y
|
||||
CONFIG_DRAM_CLK=408
|
||||
CONFIG_DRAM_ZQ=3881979
|
||||
CONFIG_DRAM_ODT_EN=y
|
||||
CONFIG_MMC0_CD_PIN=""
|
||||
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
|
||||
# CONFIG_CMD_FLASH is not set
|
||||
# CONFIG_SPL_DOS_PARTITION is not set
|
||||
# CONFIG_SPL_EFI_PARTITION is not set
|
||||
CONFIG_DEFAULT_DEVICE_TREE="sun8i-h2-plus-bananapi-m2-zero"
|
||||
Loading…
Reference in a new issue