u-boot/arch/arm/dts/Makefile

571 lines
15 KiB
Makefile
Raw Normal View History

# SPDX-License-Identifier: GPL-2.0+
dtb-$(CONFIG_TARGET_SMARTWEB) += at91sam9260-smartweb.dtb
dtb-$(CONFIG_TARGET_TAURUS) += at91sam9g20-taurus.dtb
dtb-$(CONFIG_TARGET_CORVUS) += at91sam9g45-corvus.dtb
dtb-$(CONFIG_TARGET_GURNARD) += at91sam9g45-gurnard.dtb
dtb-$(CONFIG_S5PC100) += s5pc1xx-smdkc100.dtb
dtb-$(CONFIG_S5PC110) += s5pc1xx-goni.dtb
dtb-$(CONFIG_EXYNOS4) += exynos4210-origen.dtb \
exynos4210-smdkv310.dtb \
exynos4210-universal_c210.dtb \
exynos4210-trats.dtb \
exynos4412-trats2.dtb \
exynos4412-odroid.dtb
dtb-$(CONFIG_TARGET_HIKEY) += hi6220-hikey.dtb
dtb-$(CONFIG_EXYNOS5) += exynos5250-arndale.dtb \
exynos5250-snow.dtb \
exynos5250-spring.dtb \
exynos5250-smdk5250.dtb \
exynos5420-smdk5420.dtb \
exynos5420-peach-pit.dtb \
exynos5800-peach-pi.dtb \
exynos5422-odroidxu3.dtb
dtb-$(CONFIG_EXYNOS7420) += exynos7420-espresso7420.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3036-sdk.dtb \
rk3128-evb.dtb \
rk3188-radxarock.dtb \
rk3288-evb.dtb \
rk3288-fennec.dtb \
rk3288-firefly.dtb \
rk3288-miqi.dtb \
rk3288-phycore-rdk.dtb \
rk3288-popmetal.dtb \
rk3288-rock2-square.dtb \
rk3288-tinker.dtb \
rk3288-veyron-jerry.dtb \
rk3288-veyron-mickey.dtb \
rk3288-veyron-minnie.dtb \
rk3288-vyasa.dtb \
rk3328-evb.dtb \
rk3368-lion.dtb \
rk3368-sheep.dtb \
rk3368-geekbox.dtb \
rk3368-px5-evb.dtb \
dts: rk3399-puma: add DTS for RK3399-Q7 (Puma) SoM The RK3399-Q7 is a system-on-module featuring the Rockchip RK3399 in a Qseven-compatible form-factor. These changes add a device-tree describing the board and its interfaces for basic functionality (e.g. GbE, SPI, eMMC, SD-card). This includes the following changes from the original development: * dts: rk3399-puma: include DTS for RK3399-Q7 SoM in the Makefile * dts: rk3399-puma: add gmac for the RK3399-Q7 This change enables the Gigabit Ethernet support on the RK3399-Q7. * dts: rk3399-puma: use serial0 for stdout * dts: rk3399-puma: prepare the sdmmc node for SPL booting * dts: rk3399-puma: enable spi1 and spi5, add /spi1/spiflash The RK3399-Q7 (Puma) unsually (this is a build-time option for customised boards) has an on-module SPI-flash connected to SPI1. As of today, this is a Winbond W25Q32DW (32MBit) device. The SPI5 controller is routed to the Q7 edge connector and provides general-purpose SPI connectivity for customer base-boards. With some minor improvements on integration into our outbound tree - explicitly modelled the SPI flash as 'spiflash' under spi0 [dts: rk3399-puma: explicitly model spi-flash under spi1] - renamed the aliases to spi0 and spi1 to allow easier use of commands and legacy (SPL) infrastructure... i.e. the controllers will be 0 and 1 for 'sf probe', 'sspi', etc. [dts: rk3399-puma: rename aliases to number spi as 0 and 1 for commands] * dts: rk3399-puma: include SPI in the spl-boot-order property Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Simon Glass <sjg@chromium.org>
2017-03-28 16:48:51 +00:00
rk3399-evb.dtb \
rk3399-firefly.dtb \
rk3399-puma-ddr1333.dtb \
rk3399-puma-ddr1600.dtb \
rk3399-puma-ddr1866.dtb \
rv1108-evb.dtb
dtb-$(CONFIG_ARCH_MESON) += \
meson-gxbb-nanopi-k2.dtb \
meson-gxbb-odroidc2.dtb \
meson-gxbb-nanopi-k2.dtb \
meson-gxl-s905x-p212.dtb \
meson-gxl-s905x-libretech-cc.dtb \
meson-gxl-s905x-khadas-vim.dtb \
meson-gxm-khadas-vim2.dtb
dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \
tegra20-medcom-wide.dtb \
tegra20-paz00.dtb \
tegra20-plutux.dtb \
tegra20-seaboard.dtb \
tegra20-tec.dtb \
tegra20-trimslice.dtb \
tegra20-ventana.dtb \
tegra20-colibri.dtb \
tegra30-apalis.dtb \
tegra30-beaver.dtb \
tegra30-cardhu.dtb \
tegra30-colibri.dtb \
tegra30-tec-ng.dtb \
tegra114-dalmore.dtb \
tegra124-apalis.dtb \
tegra124-jetson-tk1.dtb \
tegra124-nyan-big.dtb \
tegra124-cei-tk1-som.dtb \
tegra124-venice2.dtb \
tegra186-p2771-0000-000.dtb \
tegra186-p2771-0000-500.dtb \
tegra210-e2220-1170.dtb \
tegra210-p2371-0000.dtb \
tegra210-p2371-2180.dtb \
tegra210-p2571.dtb
dtb-$(CONFIG_ARCH_MVEBU) += \
armada-3720-db.dtb \
armada-3720-espressobin.dtb \
armada-3720-turris-mox.dtb \
armada-375-db.dtb \
armada-388-clearfog.dtb \
armada-388-gp.dtb \
armada-388-helios4.dtb \
armada-385-amc.dtb \
armada-7040-db.dtb \
armada-7040-db-nand.dtb \
armada-8040-db.dtb \
armada-8040-mcbin.dtb \
armada-xp-gp.dtb \
mvebu: Support Synology DS414 This adds support for the MV78230 based DS414 NAS by Synology. The relevant bits have been extracted from the 'synogpl-5004-armadaxp' package Synology kindly published, garnished with a fair amount of trial-and-error. Sadly, support is far from perfect. The major parts I have failed in are SATA and XHCI support. Details about these and some other things follow: Device Tree ----------- The device tree file armada-xp-synology-ds414.dts has been copied from Linux and enhanced by recent U-Boot specific changes to armada-xp-gp.dts. SATA Support ------------ There is a Marvell 88SX7042 controller attached to PCIe which is supported by Linux's sata_mv driver but sadly not U-Boot's sata_mv. I'm not sure if extending the latter to support PCI devices is worth the effort at all. Porting sata_mv from Linux exceeded my brain's capacities. :( XHCI Support ------------ There is an EtronTech EJ168A XHCI controller attached to PCIe which drives the two rear USB3 ports. After a bit of playing around I managed to get it recognized by xhci-pci, but never was able to access any devices attached to it. Enabling it in ds414 board config shows that it does not respond to commands for whatever reason. The (somewhat) bright side to it is that it is not even supported in Synology's customized U-Boot, but that also means nowhere to steal the relevant bits from. EHCI Support ------------ This seems functional after issuing 'usb start'. At least it detects USB storage devices, and IIRC reading from them was OK. OTOH Linux fails to register the controller if 'usb start' wasn't given before in U-Boot. According to Synology sources, this board seems to support USB device (gadget?) mode. Though I didn't play around with it. PCIe Support ------------ This is fine, but trying to gate the clocks of unused lanes will hang PCI enum. In addition to that, pci_mvebu seems not to support DM_PCI. DDR3 Training ------------- Marvell/Synology uses eight PUPs instead of four. Does not look like this is meant to be customized in mainline U-Boot at all. OTOH I have no idea what a "PUP" actually is. PEX Init -------- Synology uses different values than mainline U-Boot with this patch: pex_max_unit_get returns 2, pex_max_if_get returns 7 and max_serdes_lines is set to 7. Not changing this seems to not have an impact, although I'm not entirely sure it does not cause issues I am not aware of. Static Environment ------------------ This allows to boot stock Synology firmware at least. In order to be a little more flexible when it comes to booting custom kernels, do not only load zImage partition, but also rd.gz into memory. This way it is possible to use about 7MB for kernel with piggyback initramfs. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Stefan Roese <sr@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-12-25 13:41:25 +00:00
armada-xp-maxbcm.dtb \
armada-xp-synology-ds414.dtb \
armada-xp-theadorable.dtb \
armada-38x-controlcenterdc.dtb
dtb-$(CONFIG_ARCH_UNIPHIER_LD11) += \
uniphier-ld11-global.dtb \
uniphier-ld11-ref.dtb
dtb-$(CONFIG_ARCH_UNIPHIER_LD20) += \
uniphier-ld20-global.dtb \
uniphier-ld20-ref.dtb
dtb-$(CONFIG_ARCH_UNIPHIER_LD4) += \
uniphier-ld4-ref.dtb
dtb-$(CONFIG_ARCH_UNIPHIER_LD6B) += \
uniphier-ld6b-ref.dtb
dtb-$(CONFIG_ARCH_UNIPHIER_PRO4) += \
uniphier-pro4-ace.dtb \
uniphier-pro4-ref.dtb \
uniphier-pro4-sanji.dtb
dtb-$(CONFIG_ARCH_UNIPHIER_PRO5) += \
uniphier-pro5-4kbox.dtb
dtb-$(CONFIG_ARCH_UNIPHIER_PXS2) += \
uniphier-pxs2-gentil.dtb \
uniphier-pxs2-vodka.dtb
dtb-$(CONFIG_ARCH_UNIPHIER_PXS3) += \
uniphier-pxs3-ref.dtb
dtb-$(CONFIG_ARCH_UNIPHIER_SLD8) += \
uniphier-sld8-ref.dtb
dtb-$(CONFIG_ARCH_ZYNQ) += \
zynq-cc108.dtb \
zynq-cse-nand.dtb \
zynq-cse-nor.dtb \
zynq-cse-qspi-single.dtb \
zynq-dlc20-rev1.0.dtb \
zynq-microzed.dtb \
zynq-minized.dtb \
zynq-picozed.dtb \
zynq-syzygy-hub.dtb \
zynq-topic-miami.dtb \
zynq-topic-miamilite.dtb \
zynq-topic-miamiplus.dtb \
zynq-zc702.dtb \
zynq-zc706.dtb \
zynq-zc770-xm010.dtb \
zynq-zc770-xm011.dtb \
zynq-zc770-xm012.dtb \
zynq-zc770-xm013.dtb \
zynq-zed.dtb \
zynq-zturn.dtb \
zynq-zybo.dtb \
zynq-zybo-z7.dtb
dtb-$(CONFIG_ARCH_ZYNQMP) += \
avnet-ultra96-rev1.dtb \
zynqmp-mini-emmc0.dtb \
zynqmp-mini-emmc1.dtb \
zynqmp-mini-nand.dtb \
zynqmp-mini-qspi.dtb \
zynqmp-zcu100-revC.dtb \
zynqmp-zcu102-revA.dtb \
zynqmp-zcu102-revB.dtb \
zynqmp-zcu102-rev1.0.dtb \
zynqmp-zcu104-revA.dtb \
zynqmp-zcu104-revC.dtb \
zynqmp-zcu106-revA.dtb \
zynqmp-zcu111-revA.dtb \
zynqmp-zc1232-revA.dtb \
zynqmp-zc1254-revA.dtb \
zynqmp-zc1275-revA.dtb \
zynqmp-zc1275-revB.dtb \
zynqmp-zc1751-xm015-dc1.dtb \
zynqmp-zc1751-xm016-dc2.dtb \
zynqmp-zc1751-xm017-dc3.dtb \
zynqmp-zc1751-xm018-dc4.dtb \
zynqmp-zc1751-xm019-dc5.dtb
dtb-$(CONFIG_ARCH_ZYNQMP_R5) += \
zynqmp-r5.dtb
dtb-$(CONFIG_AM33XX) += am335x-boneblack.dtb am335x-bone.dtb \
am335x-draco.dtb \
am335x-evm.dtb \
am335x-evmsk.dtb \
am335x-bonegreen.dtb \
am335x-icev2.dtb \
am335x-pxm50.dtb \
am335x-rut.dtb \
am335x-pdu001.dtb
dtb-$(CONFIG_AM43XX) += am437x-gp-evm.dtb am437x-sk-evm.dtb \
am43x-epos-evm.dtb \
am437x-idk-evm.dtb \
am4372-generic.dtb
dtb-$(CONFIG_TI816X) += dm8168-evm.dtb
dtb-$(CONFIG_THUNDERX) += thunderx-88xx.dtb
dtb-$(CONFIG_ARCH_SOCFPGA) += \
socfpga_arria5_socdk.dtb \
socfpga_arria10_socdk_sdmmc.dtb \
socfpga_cyclone5_is1.dtb \
socfpga_cyclone5_socdk.dtb \
socfpga_cyclone5_dbm_soc1.dtb \
socfpga_cyclone5_de0_nano_soc.dtb \
socfpga_cyclone5_de1_soc.dtb \
socfpga_cyclone5_de10_nano.dtb \
socfpga_cyclone5_sockit.dtb \
socfpga_cyclone5_socrates.dtb \
socfpga_cyclone5_sr1500.dtb \
socfpga_cyclone5_vining_fpga.dtb \
socfpga_stratix10_socdk.dtb
dtb-$(CONFIG_TARGET_DRA7XX_EVM) += dra72-evm.dtb dra7-evm.dtb \
dra72-evm-revc.dtb dra71-evm.dtb dra76-evm.dtb
dtb-$(CONFIG_TARGET_AM57XX_EVM) += am57xx-beagle-x15.dtb \
am57xx-beagle-x15-revb1.dtb \
am57xx-beagle-x15-revc.dtb \
am574x-idk.dtb \
am572x-idk.dtb \
am571x-idk.dtb
dtb-$(CONFIG_TARGET_STV0991) += stv0991.dtb
2014-11-07 13:10:41 +00:00
dtb-$(CONFIG_ARCH_LS1021A) += ls1021a-qds-duart.dtb \
ls1021a-qds-lpuart.dtb \
ls1021a-twr-duart.dtb ls1021a-twr-lpuart.dtb \
ls1021a-iot-duart.dtb
dtb-$(CONFIG_FSL_LSCH3) += fsl-ls2080a-qds.dtb \
fsl-ls2080a-rdb.dtb \
fsl-ls2081a-rdb.dtb \
fsl-ls2088a-rdb-qspi.dtb \
fsl-ls1088a-rdb.dtb \
fsl-ls1088a-qds.dtb
dtb-$(CONFIG_FSL_LSCH2) += fsl-ls1043a-qds-duart.dtb \
fsl-ls1043a-qds-lpuart.dtb \
fsl-ls1043a-rdb.dtb \
fsl-ls1046a-qds-duart.dtb \
fsl-ls1046a-qds-lpuart.dtb \
fsl-ls1046a-rdb.dtb \
fsl-ls1012a-qds.dtb \
fsl-ls1012a-rdb.dtb \
fsl-ls1012a-2g5rdb.dtb \
fsl-ls1012a-frdm.dtb \
fsl-ls1012a-frwy.dtb
dtb-$(CONFIG_TARGET_DRAGONBOARD410C) += dragonboard410c.dtb
dtb-$(CONFIG_TARGET_DRAGONBOARD820C) += dragonboard820c.dtb
dtb-$(CONFIG_STM32F4) += stm32f429-disco.dtb \
stm32429i-eval.dtb \
stm32f469-disco.dtb
dtb-$(CONFIG_STM32F7) += stm32f746-disco.dtb \
ARM: dts: Add support for stm32f746-evaluation board support This board offers: _ STM32F746NGH6 microcontroller with 1 Mbyte Flash and 320+4 Kbytes RAM _ Six 5 V power supply options: Power jack ST-LINK/V2-1 USB connector User USB HS connector User USB FS1 connector User USB FS2 connector Daughterboard _ SAI Audio DAC, stereo audio jack which supports headset with microphone _ Stereo digital microphone, audio jack connector used to connect external speakers _ 2 Gbytes (or more) SDMMC interface microSD card _ RF-EEPROM on I2C compatible serial interface _ RS-232 communication _ IrDA transceiver _ JTAG/SWD and ETM trace debug support, ST-LINK/V2-1 embedded _ IEEE-802.3-2002 compliant Ethernet connector _ Camera module _ 8Mx32 bit SDRAM, 1Mx16 bit SRAM & 8Mx16 bit Nor Flash _ 512 Mbits QuadSPI Nor Flash _ 5.7 inch 640x480 pixel TFT color LCD with capacitive touch panel _ Joystick with 4-direction control and selector _ Reset, WakeUp/Tamper or key button _ 4 color user LEDs _ Extension connectors & memory connectors for daughterboard or wrapping board _ USB OTG HS and FS with Micro-AB connectors _ RTC with backup battery _ CAN 2.0A/B compliant connection _ Potentiometer _ Motor control connector More detailed information are available here : http://www.st.com/en/evaluation-tools/stm32746g-eval.html To compile stm32f746-eval board, use same defconfig as stm32f746-disco, the only difference is to pass "DEVICE_TREE=stm32746g-eval". Signed-off-by: Christophe Priouzeau <christophe.priouzeau@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Vikas Manocha <vikas.manocha@st.com>
2018-02-16 12:27:03 +00:00
stm32f769-disco.dtb \
stm32746g-eval.dtb
dtb-$(CONFIG_STM32H7) += stm32h743i-disco.dtb \
stm32h743i-eval.dtb
dtb-$(CONFIG_MACH_SUN4I) += \
sun4i-a10-a1000.dtb \
sun4i-a10-ba10-tvbox.dtb \
sun4i-a10-chuwi-v7-cw0825.dtb \
sun4i-a10-cubieboard.dtb \
sun4i-a10-dserve-dsrv9703c.dtb \
sun4i-a10-gemei-g9.dtb \
sun4i-a10-hackberry.dtb \
sun4i-a10-hyundai-a7hd.dtb \
sun4i-a10-inet1.dtb \
sun4i-a10-inet-3f.dtb \
sun4i-a10-inet-3w.dtb \
sun4i-a10-inet97fv2.dtb \
sun4i-a10-inet9f-rev03.dtb \
sun4i-a10-itead-iteaduino-plus.dtb \
sun4i-a10-jesurun-q5.dtb \
sun4i-a10-marsboard.dtb \
sun4i-a10-mini-xplus.dtb \
sun4i-a10-mk802.dtb \
sun4i-a10-mk802ii.dtb \
sun4i-a10-olinuxino-lime.dtb \
sun4i-a10-pcduino.dtb \
sun4i-a10-pcduino2.dtb \
sun4i-a10-pov-protab2-ips9.dtb
dtb-$(CONFIG_MACH_SUN5I) += \
sun5i-a10s-auxtek-t003.dtb \
sun5i-a10s-auxtek-t004.dtb \
sun5i-a10s-mk802.dtb \
sun5i-a10s-olinuxino-micro.dtb \
sun5i-a10s-r7-tv-dongle.dtb \
sun5i-a10s-wobo-i5.dtb \
sun5i-a13-ampe-a76.dtb \
sun5i-a13-difrnce-dit4350.dtb \
sun5i-a13-empire-electronix-d709.dtb \
sun5i-a13-empire-electronix-m712.dtb \
sun5i-a13-hsg-h702.dtb \
sun5i-a13-inet-86vs.dtb \
sun5i-a13-inet-98v-rev2.dtb \
sun5i-a13-olinuxino.dtb \
sun5i-a13-olinuxino-micro.dtb \
sun5i-a13-q8-tablet.dtb \
sun5i-a13-utoo-p66.dtb \
sun5i-gr8-chip-pro.dtb \
sun5i-r8-chip.dtb
dtb-$(CONFIG_MACH_SUN6I) += \
sun6i-a31-app4-evb1.dtb \
sun6i-a31-colombus.dtb \
sun6i-a31-hummingbird.dtb \
sun6i-a31-i7.dtb \
sun6i-a31-m9.dtb \
sun6i-a31-mele-a1000g-quad.dtb \
sun6i-a31-mixtile-loftq.dtb \
sun6i-a31s-colorfly-e708-q1.dtb \
sun6i-a31s-cs908.dtb \
sun6i-a31s-inet-q972.dtb \
sun6i-a31s-primo81.dtb \
sun6i-a31s-sina31s.dtb \
sun6i-a31s-sinovoip-bpi-m2.dtb \
sun6i-a31s-yones-toptech-bs1078-v2.dtb
dtb-$(CONFIG_MACH_SUN7I) += \
sun7i-a20-ainol-aw1.dtb \
sun7i-a20-bananapi.dtb \
sun7i-a20-bananapi-m1-plus.dtb \
sun7i-a20-bananapro.dtb \
sun7i-a20-cubieboard2.dtb \
sun7i-a20-cubietruck.dtb \
sun7i-a20-hummingbird.dtb \
sun7i-a20-i12-tvbox.dtb \
sun7i-a20-icnova-swac.dtb \
sun7i-a20-itead-ibox.dtb \
sun7i-a20-lamobo-r1.dtb \
sun7i-a20-m3.dtb \
sun7i-a20-m5.dtb \
sun7i-a20-mk808c.dtb \
sun7i-a20-olimex-som-evb.dtb \
sun7i-a20-olimex-som204-evb.dtb \
sun7i-a20-olimex-som204-evb-emmc.dtb \
sun7i-a20-olinuxino-lime.dtb \
sun7i-a20-olinuxino-lime2.dtb \
sun7i-a20-olinuxino-lime2-emmc.dtb \
sun7i-a20-olinuxino-micro.dtb \
sun7i-a20-orangepi.dtb \
sun7i-a20-orangepi-mini.dtb \
sun7i-a20-pcduino3.dtb \
sun7i-a20-pcduino3-nano.dtb \
sun7i-a20-primo73.dtb \
sun7i-a20-wexler-tab7200.dtb \
sun7i-a20-wits-pro-a20-dkt.dtb \
sun7i-a20-yones-toptech-bd1078.dtb
dtb-$(CONFIG_MACH_SUN8I_A23) += \
sun8i-a23-evb.dtb \
sun8i-a23-gt90h-v4.dtb \
sun8i-a23-inet86dz.dtb \
sun8i-a23-polaroid-mid2407pxe03.dtb \
sun8i-a23-polaroid-mid2809pxe04.dtb \
sun8i-a23-q8-tablet.dtb
dtb-$(CONFIG_MACH_SUN8I_A33) += \
sun8i-a33-ga10h-v1.1.dtb \
sun8i-a33-inet-d978-rev2.dtb \
sun8i-a33-olinuxino.dtb \
sun8i-a33-q8-tablet.dtb \
sun8i-a33-sinlinx-sina33.dtb \
sun8i-r16-bananapi-m2m.dtb \
sun8i-r16-nintendo-nes-classic-edition.dtb \
sun8i-r16-parrot.dtb
dtb-$(CONFIG_MACH_SUN8I_A83T) += \
sun8i-a83t-allwinner-h8homlet-v2.dtb \
sun8i-a83t-bananapi-m3.dtb \
sun8i-a83t-cubietruck-plus.dtb \
sun8i-a83t-tbs-a711.dts
dtb-$(CONFIG_MACH_SUN8I_H3) += \
sun8i-h2-plus-libretech-all-h3-cc.dtb \
sun8i-h2-plus-orangepi-r1.dtb \
sun8i-h2-plus-orangepi-zero.dtb \
sun8i-h3-bananapi-m2-plus.dtb \
sunxi: Add support for Libre Computer Board ALL-H3-CC H3 ver. The Libre Computer Board ALL-H3-CC from Libre Technology is a Raspberry Pi B+ form factor single board computer based on the Allwinner H3 SoC. The board has 1GB DDR3 SDRAM, provided by 4 2Gb chips. The mounting holes and connectors are in the exact same position as on the Raspberry Pi B+. Raspberry Pi B+ like peripherals supported on this board include: - Power input through micro-USB connector (without USB OTG) - Native 100 Mbps ethernet using the internal PHY, as opposed to USB-based on the RPi - 4x USB 2.0 host ports, directly connected to the SoC, as opposed to being connected through a USB 2.0 hub on the RPi - TV and audio output on a 3.5mm TRRS jack - HDMI output - Micro-SD card slot - Standard RPi B+ GPIO header, with the standard peripherals routed to the same pins. * 5V, 3.3V power, and ground * I2C0 on the H3 is routed to I2C1 pins on the RPi header * I2C1 on the H3 is routed to I2C0 pins on the RPi header * UART1 on the H3 is routed to UART0 pins on the RPi header * SPI0 on the H3 is routed to SPI0 pins on the RPi header, with GPIO pin PA17 replacing the missing Chip Select 1 * I2S1 on the H3 is routed to PCM pins on the RPi header - Additional peripherals from the H3 are available on different pins. These include I2S0, JTAG, PWM1, SPDIF, SPI1, and UART3 In addition, there are a number of new features: - Console UART header - Consumer IR receiver - Camera interface (not compatible with RPi) - Onboard microphone - eMMC expansion module port - Heatsink mounting holes This patch adds defconfig and dts files for this board. The dts file is the same as the one submitted for inclusion in Linux, with some minor revisions to match the dtsi file and old EMAC bindings in U-boot. Since the OTG controller is wired to a USB host port, and the H3 has proper USB hosts to handle host mode, the MUSB driver is not enabled. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2017-12-07 13:00:45 +00:00
sun8i-h3-libretech-all-h3-cc.dtb \
sun8i-h3-nanopi-m1.dtb \
sun8i-h3-nanopi-m1-plus.dtb \
sun8i-h3-nanopi-neo.dtb \
sun8i-h3-nanopi-neo-air.dtb \
sun8i-h3-orangepi-2.dtb \
sun8i-h3-orangepi-lite.dtb \
sun8i-h3-orangepi-one.dtb \
sun8i-h3-orangepi-pc.dtb \
sun8i-h3-orangepi-pc-plus.dtb \
sun8i-h3-orangepi-plus.dtb \
sun8i-h3-orangepi-plus2e.dtb
dtb-$(CONFIG_MACH_SUN8I_R40) += \
sun8i-r40-bananapi-m2-ultra.dtb \
sun8i-v40-bananapi-m2-berry.dtb
dtb-$(CONFIG_MACH_SUN8I_V3S) += \
sun8i-v3s-licheepi-zero.dtb
dtb-$(CONFIG_MACH_SUN50I_H5) += \
sun50i-h5-libretech-all-h3-cc.dtb \
sun50i-h5-nanopi-neo2.dtb \
sun50i-h5-nanopi-neo-plus2.dtb \
sun50i-h5-orangepi-zero-plus.dtb \
sun50i-h5-orangepi-pc2.dtb \
sun50i-h5-orangepi-prime.dtb \
sun50i-h5-orangepi-zero-plus2.dtb
dtb-$(CONFIG_MACH_SUN50I_H6) += \
sun50i-h6-orangepi-one-plus.dtb \
sun50i-h6-pine-h64.dtb
dtb-$(CONFIG_MACH_SUN50I) += \
sun50i-a64-amarula-relic.dtb \
sun50i-a64-bananapi-m64.dtb \
sun50i-a64-nanopi-a64.dtb \
sun50i-a64-olinuxino.dtb \
sun50i-a64-orangepi-win.dtb \
sun50i-a64-pine64-plus.dtb \
sun50i-a64-pine64.dtb \
sun50i-a64-sopine-baseboard.dtb
dtb-$(CONFIG_MACH_SUN9I) += \
sun9i-a80-optimus.dtb \
sun9i-a80-cubieboard4.dtb \
sun9i-a80-cx-a99.dtb
dtb-$(CONFIG_VF610) += vf500-colibri.dtb \
vf610-colibri.dtb \
vf610-twr.dtb \
pcm052.dtb \
bk4r1.dtb
dtb-$(CONFIG_MX53) += imx53-cx9020.dtb
dtb-$(CONFIG_MX6QDL) += \
imx6dl-icore.dtb \
imx6dl-icore-mipi.dtb \
imx6dl-icore-rqs.dtb \
imx6dl-mamoj.dtb \
imx6q-cm-fx6.dtb \
imx6q-icore.dtb \
imx6q-icore-mipi.dtb \
imx6q-icore-rqs.dtb \
imx6q-logicpd.dtb
dtb-$(CONFIG_MX6SL) += imx6sl-evk.dtb
dtb-$(CONFIG_MX6SL) += imx6sll-evk.dtb
dtb-$(CONFIG_MX6SX) += \
imx6sx-sabreauto.dtb \
imx6sx-sdb.dtb
dtb-$(CONFIG_MX6UL) += \
imx6ul-geam.dtb \
imx6ul-isiot-emmc.dtb \
imx6ul-isiot-nand.dtb \
imx6ul-opos6uldev.dtb \
imx6ul-14x14-evk.dtb \
imx6ul-9x9-evk.dtb
dtb-$(CONFIG_MX6ULL) += imx6ull-14x14-evk.dtb
dtb-$(CONFIG_MX7) += imx7-colibri.dtb \
imx7d-sdb.dtb \
imx7d-sdb-qspi.dtb
dtb-$(CONFIG_ARCH_MX7ULP) += imx7ulp-evk.dtb
dtb-$(CONFIG_ARCH_IMX8) += fsl-imx8qxp-mek.dtb
dtb-$(CONFIG_RCAR_GEN3) += \
r8a7795-h3ulcb-u-boot.dtb \
r8a7795-salvator-x-u-boot.dtb \
r8a7796-m3ulcb-u-boot.dtb \
r8a7796-salvator-x-u-boot.dtb \
r8a77965-salvator-x-u-boot.dtb \
r8a77970-eagle-u-boot.dtb \
r8a77990-ebisu-u-boot.dtb \
r8a77995-draak-u-boot.dtb
dtb-$(CONFIG_SOC_KEYSTONE) += keystone-k2hk-evm.dtb \
keystone-k2l-evm.dtb \
keystone-k2e-evm.dtb \
keystone-k2g-evm.dtb \
keystone-k2g-generic.dtb \
keystone-k2g-ice.dtb
dtb-$(CONFIG_TARGET_AT91SAM9261EK) += at91sam9261ek.dtb
dtb-$(CONFIG_TARGET_PM9263) += at91sam9263ek.dtb
dtb-$(CONFIG_TARGET_AT91SAM9263EK) += at91sam9263ek.dtb
dtb-$(CONFIG_TARGET_AT91SAM9RLEK) += at91sam9rlek.dtb
dtb-$(CONFIG_TARGET_AT91SAM9260EK) += \
at91sam9260ek.dtb \
at91sam9g20ek.dtb \
at91sam9g20ek_2mmc.dtb
dtb-$(CONFIG_TARGET_AT91SAM9M10G45EK) += at91sam9m10g45ek.dtb
dtb-$(CONFIG_TARGET_AT91SAM9X5EK) += \
at91sam9g15ek.dtb \
at91sam9g25ek.dtb \
at91sam9g35ek.dtb \
at91sam9x25ek.dtb \
at91sam9x35ek.dtb
dtb-$(CONFIG_TARGET_AT91SAM9N12EK) += at91sam9n12ek.dtb
dtb-$(CONFIG_TARGET_OMAP3_LOGIC) += \
logicpd-torpedo-37xx-devkit.dtb \
logicpd-som-lv-37xx-devkit.dtb
dtb-$(CONFIG_TARGET_OMAP3_EVM) += \
omap3-evm-37xx.dtb \
omap3-evm.dtb
dtb-$(CONFIG_TARGET_OMAP3_BEAGLE) += \
omap3-beagle-xm-ab.dtb \
omap3-beagle-xm.dtb \
omap3-beagle.dtb
dtb-$(CONFIG_TARGET_SAMA5D2_PTC_EK) += \
at91-sama5d2_ptc_ek.dtb
dtb-$(CONFIG_TARGET_SAMA5D2_XPLAINED) += \
at91-sama5d2_xplained.dtb
dtb-$(CONFIG_TARGET_SAMA5D27_SOM1_EK) += \
at91-sama5d27_som1_ek.dtb
dtb-$(CONFIG_TARGET_SAMA5D3XEK) += \
sama5d31ek.dtb \
sama5d33ek.dtb \
sama5d34ek.dtb \
sama5d35ek.dtb \
sama5d36ek.dtb \
sama5d36ek_cmp.dtb
dtb-$(CONFIG_TARGET_SAMA5D3_XPLAINED) += \
at91-sama5d3_xplained.dtb
dtb-$(CONFIG_TARGET_SAMA5D4EK) += \
at91-sama5d4ek.dtb
dtb-$(CONFIG_TARGET_SAMA5D4_XPLAINED) += \
at91-sama5d4_xplained.dtb
dtb-$(CONFIG_TARGET_VINCO) += \
at91-vinco.dtb
dtb-$(CONFIG_ARCH_BCM283X) += \
bcm2835-rpi-a-plus.dtb \
bcm2835-rpi-a.dtb \
bcm2835-rpi-b-plus.dtb \
bcm2835-rpi-b-rev2.dtb \
bcm2835-rpi-b.dtb \
bcm2836-rpi-2-b.dtb \
bcm2837-rpi-3-b.dtb
dtb-$(CONFIG_ARCH_ASPEED) += ast2500-evb.dtb
dtb-$(CONFIG_ARCH_STI) += stih410-b2260.dtb
dtb-$(CONFIG_TARGET_STM32MP1) += \
stm32mp157c-ed1.dtb \
stm32mp157c-ev1.dtb
dtb-$(CONFIG_SOC_K3_AM6) += k3-am654-base-board.dtb
targets += $(dtb-y)
# Add any required device tree compiler flags here
DTC_FLAGS +=
PHONY += dtbs
dtbs: $(addprefix $(obj)/, $(dtb-y))
@:
clean-files := *.dtb