mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-28 15:41:40 +00:00
arm: Add Khadas VIM support based on Meson GXL family
This adds platform code for the Khadas VIM board based on a Meson GXL (S905X) SoC with the Meson GXL configuration. This initial submission supports UART, MMC/SDCard and Ethernet with the Internal RMII PHY. The meson-gxl-s905x-khadas-vim.dts is synchronised from the linux 4.13 stable tree as of 4.13.8. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
This commit is contained in:
Neil Armstrong
Tom Rini
parent
96e7b5a174
commit
5ff2ee44ee
10 changed files with 375 additions and 1 deletions
|
|
@ -57,7 +57,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
|
|||
dtb-$(CONFIG_ARCH_MESON) += \
|
||||
meson-gxbb-odroidc2.dtb \
|
||||
meson-gxl-s905x-p212.dtb \
|
||||
meson-gxl-s905x-libretech-cc.dtb
|
||||
meson-gxl-s905x-libretech-cc.dtb \
|
||||
meson-gxl-s905x-khadas-vim.dtb
|
||||
dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \
|
||||
tegra20-medcom-wide.dtb \
|
||||
tegra20-paz00.dtb \
|
||||
|
|
|
|||
137
arch/arm/dts/meson-gxl-s905x-khadas-vim.dts
Normal file
137
arch/arm/dts/meson-gxl-s905x-khadas-vim.dts
Normal file
|
|
@ -0,0 +1,137 @@
|
|||
/*
|
||||
* Copyright (c) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
|
||||
*
|
||||
* SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
#include "meson-gxl-s905x-p212.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "khadas,vim", "amlogic,s905x", "amlogic,meson-gxl";
|
||||
model = "Khadas VIM";
|
||||
|
||||
adc-keys {
|
||||
compatible = "adc-keys";
|
||||
io-channels = <&saradc 0>;
|
||||
io-channel-names = "buttons";
|
||||
keyup-threshold-microvolt = <1710000>;
|
||||
|
||||
button-function {
|
||||
label = "Function";
|
||||
linux,code = <KEY_FN>;
|
||||
press-threshold-microvolt = <10000>;
|
||||
};
|
||||
};
|
||||
|
||||
aliases {
|
||||
serial2 = &uart_AO_B;
|
||||
};
|
||||
|
||||
gpio-keys-polled {
|
||||
compatible = "gpio-keys-polled";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
poll-interval = <100>;
|
||||
|
||||
button@0 {
|
||||
label = "power";
|
||||
linux,code = <KEY_POWER>;
|
||||
gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
pwmleds {
|
||||
compatible = "pwm-leds";
|
||||
|
||||
power {
|
||||
label = "vim:red:power";
|
||||
pwms = <&pwm_AO_ab 1 7812500 0>;
|
||||
max-brightness = <255>;
|
||||
linux,default-trigger = "default-on";
|
||||
};
|
||||
};
|
||||
|
||||
hdmi-connector {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi_connector_in: endpoint {
|
||||
remote-endpoint = <&hdmi_tx_tmds_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi_tx {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&hdmi_tx_tmds_port {
|
||||
hdmi_tx_tmds_out: endpoint {
|
||||
remote-endpoint = <&hdmi_connector_in>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c_A {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&i2c_a_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&i2c_B {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&i2c_b_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
rtc: rtc@51 {
|
||||
/* has to be enabled manually when a battery is connected: */
|
||||
status = "disabled";
|
||||
compatible = "haoyu,hym8563";
|
||||
reg = <0x51>;
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <32768>;
|
||||
clock-output-names = "xin32k";
|
||||
};
|
||||
};
|
||||
|
||||
&ir {
|
||||
linux,rc-map-name = "rc-geekbox";
|
||||
};
|
||||
|
||||
&pwm_AO_ab {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&pwm_ao_a_3_pins>, <&pwm_ao_b_pins>;
|
||||
pinctrl-names = "default";
|
||||
clocks = <&xtal> , <&xtal>;
|
||||
clock-names = "clkin0", "clkin1" ;
|
||||
};
|
||||
|
||||
&pwm_ef {
|
||||
pinctrl-0 = <&pwm_e_pins>, <&pwm_f_clk_pins>;
|
||||
};
|
||||
|
||||
&sd_emmc_a {
|
||||
brcmf: wifi@1 {
|
||||
reg = <1>;
|
||||
compatible = "brcm,bcm4329-fmac";
|
||||
};
|
||||
};
|
||||
|
||||
/* This is brought out on the Linux_RX (18) and Linux_TX (19) pins: */
|
||||
&uart_AO {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* This is brought out on the UART_RX_AO_B (15) and UART_TX_AO_B (16) pins: */
|
||||
&uart_AO_B {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&uart_ao_b_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
|
@ -45,6 +45,13 @@ config TARGET_LIBRETECH_CC
|
|||
with 2 GiB of RAM, Ethernet, HDMI, 4 USB, micro-SD slot,
|
||||
eMMC, IR receiver and a 40-pin GPIO header.
|
||||
|
||||
config TARGET_KHADAS_VIM
|
||||
bool "KHADAS-VIM"
|
||||
help
|
||||
Khadas VIM is a single board computer based on Meson GXL
|
||||
with 2 GiB of RAM, Ethernet, HDMI, 4 USB, micro-SD slot,
|
||||
eMMC, IR receiver and a 40-pin GPIO header.
|
||||
|
||||
endif
|
||||
|
||||
config SYS_SOC
|
||||
|
|
@ -59,4 +66,6 @@ source "board/amlogic/p212/Kconfig"
|
|||
|
||||
source "board/amlogic/libretech-cc/Kconfig"
|
||||
|
||||
source "board/amlogic/khadas-vim/Kconfig"
|
||||
|
||||
endif
|
||||
|
|
|
|||
12
board/amlogic/khadas-vim/Kconfig
Normal file
12
board/amlogic/khadas-vim/Kconfig
Normal file
|
|
@ -0,0 +1,12 @@
|
|||
if TARGET_KHADAS_VIM
|
||||
|
||||
config SYS_BOARD
|
||||
default "khadas-vim"
|
||||
|
||||
config SYS_VENDOR
|
||||
default "amlogic"
|
||||
|
||||
config SYS_CONFIG_NAME
|
||||
default "khadas-vim"
|
||||
|
||||
endif
|
||||
6
board/amlogic/khadas-vim/MAINTAINERS
Normal file
6
board/amlogic/khadas-vim/MAINTAINERS
Normal file
|
|
@ -0,0 +1,6 @@
|
|||
KHADAS-VIM
|
||||
M: Neil Armstrong <narmstrong@baylibre.com>
|
||||
S: Maintained
|
||||
F: board/amlogic/khadas-vim/
|
||||
F: include/configs/khadas-vim.h
|
||||
F: configs/khadas-vim_defconfig
|
||||
8
board/amlogic/khadas-vim/Makefile
Normal file
8
board/amlogic/khadas-vim/Makefile
Normal file
|
|
@ -0,0 +1,8 @@
|
|||
#
|
||||
# (C) Copyright 2016 BayLibre, SAS
|
||||
# Author: Neil Armstrong <narmstrong@baylibre.com>
|
||||
#
|
||||
# SPDX-License-Identifier: GPL-2.0+
|
||||
#
|
||||
|
||||
obj-y := khadas-vim.o
|
||||
96
board/amlogic/khadas-vim/README
Normal file
96
board/amlogic/khadas-vim/README
Normal file
|
|
@ -0,0 +1,96 @@
|
|||
U-Boot for Khadas VIM
|
||||
=======================
|
||||
|
||||
Khadas VIM is an Open Source DIY Box manufactured by Shenzhen Tomato
|
||||
Technology Co., Ltd with the following specifications:
|
||||
|
||||
- Amlogic S905x ARM Cortex-A53 quad-core SoC @ 2GHz
|
||||
- ARM Mali 450 GPU
|
||||
- 2GB DDR3 SDRAM
|
||||
- 10/100 Ethernet
|
||||
- HDMI 2.0 4K/60Hz display
|
||||
- 40-pin GPIO header
|
||||
- 2 x USB 2.0 Host, 1 x USB 2.0 Type-C OTG
|
||||
- 8GB/16GBeMMC
|
||||
- microSD
|
||||
- SDIO Wifi Module, Bluetooth
|
||||
- Two channels IR receiver
|
||||
|
||||
Currently the u-boot port supports the following devices:
|
||||
- serial
|
||||
- eMMC, microSD
|
||||
- Ethernet
|
||||
|
||||
U-Boot compilation
|
||||
==================
|
||||
|
||||
> export ARCH=arm
|
||||
> export CROSS_COMPILE=aarch64-none-elf-
|
||||
> make khadas-vim_defconfig
|
||||
> make
|
||||
|
||||
Image creation
|
||||
==============
|
||||
|
||||
Amlogic doesn't provide sources for the firmware and for tools needed
|
||||
to create the bootloader image, so it is necessary to obtain them from
|
||||
the git tree published by the board vendor:
|
||||
|
||||
> wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
|
||||
> wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
|
||||
> tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
|
||||
> tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
|
||||
> export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH
|
||||
> git clone https://github.com/khadas/u-boot -b Vim vim-u-boot
|
||||
> cd vim-u-boot
|
||||
> make kvim_defconfig
|
||||
> make
|
||||
> export FIPDIR=$PWD/fip
|
||||
|
||||
Go back to mainline U-Boot source tree then :
|
||||
> mkdir fip
|
||||
|
||||
> cp $FIPDIR/gxl/bl2.bin fip/
|
||||
> cp $FIPDIR/gxl/acs.bin fip/
|
||||
> cp $FIPDIR/gxl/bl21.bin fip/
|
||||
> cp $FIPDIR/gxl/bl30.bin fip/
|
||||
> cp $FIPDIR/gxl/bl301.bin fip/
|
||||
> cp $FIPDIR/gxl/bl31.img fip/
|
||||
> cp u-boot.bin fip/bl33.bin
|
||||
|
||||
> $FIPDIR/blx_fix.sh \
|
||||
fip/bl30.bin \
|
||||
fip/zero_tmp \
|
||||
fip/bl30_zero.bin \
|
||||
fip/bl301.bin \
|
||||
fip/bl301_zero.bin \
|
||||
fip/bl30_new.bin \
|
||||
bl30
|
||||
|
||||
> $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0
|
||||
|
||||
> $FIPDIR/blx_fix.sh \
|
||||
fip/bl2_acs.bin \
|
||||
fip/zero_tmp \
|
||||
fip/bl2_zero.bin \
|
||||
fip/bl21.bin \
|
||||
fip/bl21_zero.bin \
|
||||
fip/bl2_new.bin \
|
||||
bl2
|
||||
|
||||
> $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin
|
||||
> $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img
|
||||
> $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin
|
||||
> $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig
|
||||
> $FIPDIR/gxl/aml_encrypt_gxl --bootmk \
|
||||
--output fip/u-boot.bin \
|
||||
--bl2 fip/bl2.n.bin.sig \
|
||||
--bl30 fip/bl30_new.bin.enc \
|
||||
--bl31 fip/bl31.img.enc \
|
||||
--bl33 fip/bl33.bin.enc
|
||||
|
||||
and then write the image to SD with:
|
||||
|
||||
> DEV=/dev/your_sd_device
|
||||
> dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
|
||||
> dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
|
||||
49
board/amlogic/khadas-vim/khadas-vim.c
Normal file
49
board/amlogic/khadas-vim/khadas-vim.c
Normal file
|
|
@ -0,0 +1,49 @@
|
|||
/*
|
||||
* Copyright (C) 2016 BayLibre, SAS
|
||||
* Author: Neil Armstrong <narmstrong@baylibre.com>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <dm.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/arch/gxbb.h>
|
||||
#include <asm/arch/sm.h>
|
||||
#include <asm/arch/eth.h>
|
||||
|
||||
#define EFUSE_SN_OFFSET 20
|
||||
#define EFUSE_SN_SIZE 16
|
||||
#define EFUSE_MAC_OFFSET 52
|
||||
#define EFUSE_MAC_SIZE 6
|
||||
|
||||
int board_init(void)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
int misc_init_r(void)
|
||||
{
|
||||
u8 mac_addr[EFUSE_MAC_SIZE];
|
||||
char serial[EFUSE_SN_SIZE];
|
||||
ssize_t len;
|
||||
|
||||
meson_gx_eth_init(PHY_INTERFACE_MODE_RMII,
|
||||
MESON_GXL_USE_INTERNAL_RMII_PHY);
|
||||
|
||||
if (!eth_env_get_enetaddr("ethaddr", mac_addr)) {
|
||||
len = meson_sm_read_efuse(EFUSE_MAC_OFFSET,
|
||||
mac_addr, EFUSE_MAC_SIZE);
|
||||
if (len == EFUSE_MAC_SIZE && is_valid_ethaddr(mac_addr))
|
||||
eth_env_set_enetaddr("ethaddr", mac_addr);
|
||||
}
|
||||
|
||||
if (!env_get("serial#")) {
|
||||
len = meson_sm_read_efuse(EFUSE_SN_OFFSET, serial,
|
||||
EFUSE_SN_SIZE);
|
||||
if (len == EFUSE_SN_SIZE)
|
||||
env_set("serial#", serial);
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
35
configs/khadas-vim_defconfig
Normal file
35
configs/khadas-vim_defconfig
Normal file
|
|
@ -0,0 +1,35 @@
|
|||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_MESON=y
|
||||
CONFIG_MESON_GXL=y
|
||||
CONFIG_TARGET_KHADAS_VIM=y
|
||||
CONFIG_IDENT_STRING=" khadas-vim"
|
||||
CONFIG_DEFAULT_DEVICE_TREE="meson-gxl-s905x-khadas-vim"
|
||||
CONFIG_DEBUG_UART=y
|
||||
CONFIG_ENV_IS_NOWHERE=y
|
||||
# CONFIG_DISPLAY_CPUINFO is not set
|
||||
# CONFIG_DISPLAY_BOARDINFO is not set
|
||||
# CONFIG_CMD_BDI is not set
|
||||
# CONFIG_CMD_IMI is not set
|
||||
# CONFIG_CMD_IMLS is not set
|
||||
# CONFIG_CMD_LOADS is not set
|
||||
CONFIG_CMD_MMC=y
|
||||
# CONFIG_CMD_FPGA is not set
|
||||
CONFIG_CMD_GPIO=y
|
||||
# CONFIG_CMD_SETEXPR is not set
|
||||
CONFIG_OF_CONTROL=y
|
||||
CONFIG_DM_GPIO=y
|
||||
CONFIG_DM_MMC=y
|
||||
CONFIG_MMC_MESON_GX=y
|
||||
CONFIG_DM_ETH=y
|
||||
CONFIG_ETH_DESIGNWARE=y
|
||||
CONFIG_PHY_MESON_GXL=y
|
||||
CONFIG_NET_RANDOM_ETHADDR=y
|
||||
CONFIG_PINCTRL=y
|
||||
CONFIG_PINCTRL_MESON_GXL=y
|
||||
CONFIG_DEBUG_UART_MESON=y
|
||||
CONFIG_DEBUG_UART_BASE=0xc81004c0
|
||||
CONFIG_DEBUG_UART_CLOCK=24000000
|
||||
CONFIG_DEBUG_UART_ANNOUNCE=y
|
||||
CONFIG_DEBUG_UART_SKIP_INIT=y
|
||||
CONFIG_MESON_SERIAL=y
|
||||
CONFIG_OF_LIBFDT_OVERLAY=y
|
||||
21
include/configs/khadas-vim.h
Normal file
21
include/configs/khadas-vim.h
Normal file
|
|
@ -0,0 +1,21 @@
|
|||
/*
|
||||
* Configuration for Khadas VIM
|
||||
*
|
||||
* Copyright (C) 2017 Baylibre, SAS
|
||||
* Author: Neil Armstrong <narmstrong@baylibre.com>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
#define CONFIG_MISC_INIT_R
|
||||
|
||||
#define CONFIG_PHY_ADDR 8
|
||||
|
||||
#define MESON_FDTFILE_SETTING "fdtfile=amlogic/meson-gxl-s905x-khadas-vim.dtb\0"
|
||||
|
||||
#include <configs/meson-gxbb-common.h>
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
Loading…
Reference in a new issue