mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-10 23:24:38 +00:00
ARM: dts: add support for BananaPi M2-Pro
Import the board dts from the linux-amlogic/for-next (6.4-rc1) branch. This involves spliting the BPI-M5 dts into a dtsi and then reusing this for the M2-Pro. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230323143142.780306-4-christianshewitt@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
This commit is contained in:
Christian Hewitt
Neil Armstrong
parent
378a1d9658
commit
7b95660dfc
5 changed files with 550 additions and 428 deletions
|
|
@ -205,14 +205,15 @@ dtb-$(CONFIG_ARCH_MESON) += \
|
|||
meson-g12a-sei510.dtb \
|
||||
meson-g12a-u200.dtb \
|
||||
meson-g12b-a311d-khadas-vim3.dtb \
|
||||
meson-g12b-bananapi-cm4-cm4io.dtb \
|
||||
meson-g12b-gsking-x.dtb \
|
||||
meson-g12b-gtking.dtb \
|
||||
meson-g12b-gtking-pro.dtb \
|
||||
meson-g12b-gsking-x.dtb \
|
||||
meson-g12b-odroid-go-ultra.dtb \
|
||||
meson-g12b-odroid-n2.dtb \
|
||||
meson-g12b-odroid-n2l.dtb \
|
||||
meson-g12b-odroid-n2-plus.dtb \
|
||||
meson-g12b-bananapi-cm4-cm4io.dtb \
|
||||
meson-sm1-bananapi-m2-pro.dtb \
|
||||
meson-sm1-bananapi-m5.dtb \
|
||||
meson-sm1-khadas-vim3l.dtb \
|
||||
meson-sm1-odroid-c4.dtb \
|
||||
|
|
|
|||
14
arch/arm/dts/meson-sm1-bananapi-m2-pro-u-boot.dtsi
Normal file
14
arch/arm/dts/meson-sm1-bananapi-m2-pro-u-boot.dtsi
Normal file
|
|
@ -0,0 +1,14 @@
|
|||
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2021 BayLibre, SAS
|
||||
* Author: Neil Armstrong <narmstrong@baylibre.com>
|
||||
*/
|
||||
|
||||
#include "meson-sm1-u-boot.dtsi"
|
||||
|
||||
ðmac {
|
||||
snps,reset-gpio = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
|
||||
snps,reset-delays-us = <0 10000 1000000>;
|
||||
snps,reset-active-low;
|
||||
};
|
||||
97
arch/arm/dts/meson-sm1-bananapi-m2-pro.dts
Normal file
97
arch/arm/dts/meson-sm1-bananapi-m2-pro.dts
Normal file
|
|
@ -0,0 +1,97 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2021 BayLibre SAS
|
||||
* Author: Neil Armstrong <narmstrong@baylibre.com>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "meson-sm1-bananapi.dtsi"
|
||||
#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
|
||||
|
||||
/ {
|
||||
compatible = "bananapi,bpi-m2-pro", "amlogic,sm1";
|
||||
model = "Banana Pi BPI-M2-PRO";
|
||||
|
||||
sound {
|
||||
compatible = "amlogic,axg-sound-card";
|
||||
model = "BPI-M2-PRO";
|
||||
audio-aux-devs = <&tdmout_b>;
|
||||
audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
|
||||
"TDMOUT_B IN 1", "FRDDR_B OUT 1",
|
||||
"TDMOUT_B IN 2", "FRDDR_C OUT 1",
|
||||
"TDM_B Playback", "TDMOUT_B OUT";
|
||||
|
||||
assigned-clocks = <&clkc CLKID_MPLL2>,
|
||||
<&clkc CLKID_MPLL0>,
|
||||
<&clkc CLKID_MPLL1>;
|
||||
assigned-clock-parents = <0>, <0>, <0>;
|
||||
assigned-clock-rates = <294912000>,
|
||||
<270950400>,
|
||||
<393216000>;
|
||||
|
||||
dai-link-0 {
|
||||
sound-dai = <&frddr_a>;
|
||||
};
|
||||
|
||||
dai-link-1 {
|
||||
sound-dai = <&frddr_b>;
|
||||
};
|
||||
|
||||
dai-link-2 {
|
||||
sound-dai = <&frddr_c>;
|
||||
};
|
||||
|
||||
/* 8ch hdmi interface */
|
||||
dai-link-3 {
|
||||
sound-dai = <&tdmif_b>;
|
||||
dai-format = "i2s";
|
||||
dai-tdm-slot-tx-mask-0 = <1 1>;
|
||||
dai-tdm-slot-tx-mask-1 = <1 1>;
|
||||
dai-tdm-slot-tx-mask-2 = <1 1>;
|
||||
dai-tdm-slot-tx-mask-3 = <1 1>;
|
||||
mclk-fs = <256>;
|
||||
|
||||
codec {
|
||||
sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
|
||||
};
|
||||
};
|
||||
|
||||
/* hdmi glue */
|
||||
dai-link-4 {
|
||||
sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
|
||||
|
||||
codec {
|
||||
sound-dai = <&hdmi_tx>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&clkc_audio {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&frddr_a {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&frddr_b {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&frddr_c {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tdmif_b {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tdmout_b {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tohdmitx {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -6,10 +6,7 @@
|
|||
|
||||
/dts-v1/;
|
||||
|
||||
#include "meson-sm1.dtsi"
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/input/linux-event-codes.h>
|
||||
#include <dt-bindings/gpio/meson-g12a-gpio.h>
|
||||
#include "meson-sm1-bananapi.dtsi"
|
||||
#include <dt-bindings/sound/meson-g12a-toacodec.h>
|
||||
#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
|
||||
|
||||
|
|
@ -17,28 +14,6 @@
|
|||
compatible = "bananapi,bpi-m5", "amlogic,sm1";
|
||||
model = "Banana Pi BPI-M5";
|
||||
|
||||
adc_keys {
|
||||
compatible = "adc-keys";
|
||||
io-channels = <&saradc 2>;
|
||||
io-channel-names = "buttons";
|
||||
keyup-threshold-microvolt = <1800000>;
|
||||
|
||||
key {
|
||||
label = "SW3";
|
||||
linux,code = <BTN_3>;
|
||||
press-threshold-microvolt = <1700000>;
|
||||
};
|
||||
};
|
||||
|
||||
aliases {
|
||||
serial0 = &uart_AO;
|
||||
ethernet0 = ðmac;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
/* TOFIX: handle CVBS_DET on SARADC channel 0 */
|
||||
cvbs-connector {
|
||||
compatible = "composite-video-connector";
|
||||
|
|
@ -50,150 +25,6 @@
|
|||
};
|
||||
};
|
||||
|
||||
emmc_pwrseq: emmc-pwrseq {
|
||||
compatible = "mmc-pwrseq-emmc";
|
||||
reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
key {
|
||||
label = "SW1";
|
||||
linux,code = <BTN_1>;
|
||||
gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
|
||||
interrupt-parent = <&gpio_intc>;
|
||||
interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
|
||||
};
|
||||
};
|
||||
|
||||
hdmi-connector {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi_connector_in: endpoint {
|
||||
remote-endpoint = <&hdmi_tx_tmds_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
green {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
blue {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
};
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x0 0x0 0x40000000>;
|
||||
};
|
||||
|
||||
emmc_1v8: regulator-emmc_1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "EMMC_1V8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vddao_3v3>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
dc_in: regulator-dc_in {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "DC_IN";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vddio_c: regulator-vddio_c {
|
||||
compatible = "regulator-gpio";
|
||||
regulator-name = "VDDIO_C";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
enable-gpio = <&gpio GPIOE_2 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
|
||||
gpios = <&gpio_ao GPIOAO_6 GPIO_OPEN_DRAIN>;
|
||||
gpios-states = <1>;
|
||||
|
||||
states = <1800000 0>,
|
||||
<3300000 1>;
|
||||
};
|
||||
|
||||
tflash_vdd: regulator-tflash_vdd {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "TFLASH_VDD";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&dc_in>;
|
||||
gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vddao_1v8: regulator-vddao_1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDDAO_1V8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vddao_3v3>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vddao_3v3: regulator-vddao_3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDDAO_3V3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&dc_in>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vddcpu: regulator-vddcpu {
|
||||
/*
|
||||
* SY8120B1ABC DC/DC Regulator.
|
||||
*/
|
||||
compatible = "pwm-regulator";
|
||||
|
||||
regulator-name = "VDDCPU";
|
||||
regulator-min-microvolt = <690000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
|
||||
vin-supply = <&dc_in>;
|
||||
|
||||
pwms = <&pwm_AO_cd 1 1250 0>;
|
||||
pwm-dutycycle-range = <100 0>;
|
||||
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
/* USB Hub Power Enable */
|
||||
vl_pwr_en: regulator-vl_pwr_en {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VL_PWR_EN";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&dc_in>;
|
||||
|
||||
gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "amlogic,axg-sound-card";
|
||||
model = "BPI-M5";
|
||||
|
|
@ -233,7 +64,6 @@
|
|||
assigned-clock-rates = <294912000>,
|
||||
<270950400>,
|
||||
<393216000>;
|
||||
status = "okay";
|
||||
|
||||
dai-link-0 {
|
||||
sound-dai = <&frddr_a>;
|
||||
|
|
@ -319,68 +149,17 @@
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
&arb {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&clkc_audio {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vddcpu>;
|
||||
operating-points-v2 = <&cpu_opp_table>;
|
||||
clocks = <&clkc CLKID_CPU_CLK>;
|
||||
clock-latency = <50000>;
|
||||
};
|
||||
|
||||
&cpu1 {
|
||||
cpu-supply = <&vddcpu>;
|
||||
operating-points-v2 = <&cpu_opp_table>;
|
||||
clocks = <&clkc CLKID_CPU1_CLK>;
|
||||
clock-latency = <50000>;
|
||||
};
|
||||
|
||||
&cpu2 {
|
||||
cpu-supply = <&vddcpu>;
|
||||
operating-points-v2 = <&cpu_opp_table>;
|
||||
clocks = <&clkc CLKID_CPU2_CLK>;
|
||||
clock-latency = <50000>;
|
||||
};
|
||||
|
||||
&cpu3 {
|
||||
cpu-supply = <&vddcpu>;
|
||||
operating-points-v2 = <&cpu_opp_table>;
|
||||
clocks = <&clkc CLKID_CPU3_CLK>;
|
||||
clock-latency = <50000>;
|
||||
};
|
||||
|
||||
&cvbs_vdac_port {
|
||||
cvbs_vdac_out: endpoint {
|
||||
remote-endpoint = <&cvbs_connector_in>;
|
||||
};
|
||||
};
|
||||
|
||||
&ext_mdio {
|
||||
external_phy: ethernet-phy@0 {
|
||||
/* Realtek RTL8211F (0x001cc916) */
|
||||
reg = <0>;
|
||||
max-speed = <1000>;
|
||||
|
||||
interrupt-parent = <&gpio_intc>;
|
||||
/* MAC_INTR on GPIOZ_14 */
|
||||
interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
ðmac {
|
||||
pinctrl-0 = <ð_pins>, <ð_rgmii_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
phy-mode = "rgmii-txid";
|
||||
phy-handle = <&external_phy>;
|
||||
};
|
||||
|
||||
&frddr_a {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -393,191 +172,6 @@
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
&gpio {
|
||||
gpio-line-names =
|
||||
/* GPIOZ */
|
||||
"ETH_MDIO", /* GPIOZ_0 */
|
||||
"ETH_MDC", /* GPIOZ_1 */
|
||||
"ETH_RXCLK", /* GPIOZ_2 */
|
||||
"ETH_RX_DV", /* GPIOZ_3 */
|
||||
"ETH_RXD0", /* GPIOZ_4 */
|
||||
"ETH_RXD1", /* GPIOZ_5 */
|
||||
"ETH_RXD2", /* GPIOZ_6 */
|
||||
"ETH_RXD3", /* GPIOZ_7 */
|
||||
"ETH_TXCLK", /* GPIOZ_8 */
|
||||
"ETH_TXEN", /* GPIOZ_9 */
|
||||
"ETH_TXD0", /* GPIOZ_10 */
|
||||
"ETH_TXD1", /* GPIOZ_11 */
|
||||
"ETH_TXD2", /* GPIOZ_12 */
|
||||
"ETH_TXD3", /* GPIOZ_13 */
|
||||
"ETH_INTR", /* GPIOZ_14 */
|
||||
"ETH_NRST", /* GPIOZ_15 */
|
||||
/* GPIOH */
|
||||
"HDMI_SDA", /* GPIOH_0 */
|
||||
"HDMI_SCL", /* GPIOH_1 */
|
||||
"HDMI_HPD", /* GPIOH_2 */
|
||||
"HDMI_CEC", /* GPIOH_3 */
|
||||
"VL-RST_N", /* GPIOH_4 */
|
||||
"CON1-P36", /* GPIOH_5 */
|
||||
"VL-PWREN", /* GPIOH_6 */
|
||||
"WiFi_3V3_1V8", /* GPIOH_7 */
|
||||
"TFLASH_VDD_EN", /* GPIOH_8 */
|
||||
/* BOOT */
|
||||
"eMMC_D0", /* BOOT_0 */
|
||||
"eMMC_D1", /* BOOT_1 */
|
||||
"eMMC_D2", /* BOOT_2 */
|
||||
"eMMC_D3", /* BOOT_3 */
|
||||
"eMMC_D4", /* BOOT_4 */
|
||||
"eMMC_D5", /* BOOT_5 */
|
||||
"eMMC_D6", /* BOOT_6 */
|
||||
"eMMC_D7", /* BOOT_7 */
|
||||
"eMMC_CLK", /* BOOT_8 */
|
||||
"",
|
||||
"eMMC_CMD", /* BOOT_10 */
|
||||
"",
|
||||
"eMMC_RST#", /* BOOT_12 */
|
||||
"eMMC_DS", /* BOOT_13 */
|
||||
/* GPIOC */
|
||||
"SD_D0_B", /* GPIOC_0 */
|
||||
"SD_D1_B", /* GPIOC_1 */
|
||||
"SD_D2_B", /* GPIOC_2 */
|
||||
"SD_D3_B", /* GPIOC_3 */
|
||||
"SD_CLK_B", /* GPIOC_4 */
|
||||
"SD_CMD_B", /* GPIOC_5 */
|
||||
"CARD_EN_DET", /* GPIOC_6 */
|
||||
"",
|
||||
/* GPIOA */
|
||||
"", "", "", "", "", "", "", "",
|
||||
"", "", "", "", "", "",
|
||||
"CON1-P27", /* GPIOA_14 */
|
||||
"CON1-P28", /* GPIOA_15 */
|
||||
/* GPIOX */
|
||||
"CON1-P16", /* GPIOX_0 */
|
||||
"CON1-P18", /* GPIOX_1 */
|
||||
"CON1-P22", /* GPIOX_2 */
|
||||
"CON1-P11", /* GPIOX_3 */
|
||||
"CON1-P13", /* GPIOX_4 */
|
||||
"CON1-P07", /* GPIOX_5 */
|
||||
"CON1-P33", /* GPIOX_6 */
|
||||
"CON1-P15", /* GPIOX_7 */
|
||||
"CON1-P19", /* GPIOX_8 */
|
||||
"CON1-P21", /* GPIOX_9 */
|
||||
"CON1-P24", /* GPIOX_10 */
|
||||
"CON1-P23", /* GPIOX_11 */
|
||||
"CON1-P08", /* GPIOX_12 */
|
||||
"CON1-P10", /* GPIOX_13 */
|
||||
"CON1-P29", /* GPIOX_14 */
|
||||
"CON1-P31", /* GPIOX_15 */
|
||||
"CON1-P26", /* GPIOX_16 */
|
||||
"CON1-P03", /* GPIOX_17 */
|
||||
"CON1-P05", /* GPIOX_18 */
|
||||
"CON1-P32"; /* GPIOX_19 */
|
||||
|
||||
/*
|
||||
* WARNING: The USB Hub on the BPI-M5 needs a reset signal
|
||||
* to be turned high in order to be detected by the USB Controller
|
||||
* This signal should be handled by a USB specific power sequence
|
||||
* in order to reset the Hub when USB bus is powered down.
|
||||
*/
|
||||
usb-hub {
|
||||
gpio-hog;
|
||||
gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>;
|
||||
output-high;
|
||||
line-name = "usb-hub-reset";
|
||||
};
|
||||
};
|
||||
|
||||
&gpio_ao {
|
||||
gpio-line-names =
|
||||
/* GPIOAO */
|
||||
"DEBUG TX", /* GPIOAO_0 */
|
||||
"DEBUG RX", /* GPIOAO_1 */
|
||||
"SYS_LED2", /* GPIOAO_2 */
|
||||
"UPDATE_KEY", /* GPIOAO_3 */
|
||||
"CON1-P40", /* GPIOAO_4 */
|
||||
"IR_IN", /* GPIOAO_5 */
|
||||
"TF_3V3N_1V8_EN", /* GPIOAO_6 */
|
||||
"CON1-P35", /* GPIOAO_7 */
|
||||
"CON1-P12", /* GPIOAO_8 */
|
||||
"CON1-P37", /* GPIOAO_9 */
|
||||
"CON1-P38", /* GPIOAO_10 */
|
||||
"SYS_LED", /* GPIOAO_11 */
|
||||
/* GPIOE */
|
||||
"VDDEE_PWM", /* GPIOE_0 */
|
||||
"VDDCPU_PWM", /* GPIOE_1 */
|
||||
"TF_PWR_EN"; /* GPIOE_2 */
|
||||
};
|
||||
|
||||
&hdmi_tx {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
|
||||
pinctrl-names = "default";
|
||||
hdmi-supply = <&dc_in>;
|
||||
};
|
||||
|
||||
&hdmi_tx_tmds_port {
|
||||
hdmi_tx_tmds_out: endpoint {
|
||||
remote-endpoint = <&hdmi_connector_in>;
|
||||
};
|
||||
};
|
||||
|
||||
&ir {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&remote_input_ao_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&pwm_AO_cd {
|
||||
pinctrl-0 = <&pwm_ao_d_e_pins>;
|
||||
pinctrl-names = "default";
|
||||
clocks = <&xtal>;
|
||||
clock-names = "clkin1";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
status = "okay";
|
||||
vref-supply = <&vddao_1v8>;
|
||||
};
|
||||
|
||||
/* SD card */
|
||||
&sd_emmc_b {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&sdcard_c_pins>;
|
||||
pinctrl-1 = <&sdcard_clk_gate_c_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
max-frequency = <50000000>;
|
||||
disable-wp;
|
||||
|
||||
/* TOFIX: SD card is barely usable in SDR modes */
|
||||
|
||||
cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
|
||||
vmmc-supply = <&tflash_vdd>;
|
||||
vqmmc-supply = <&vddio_c>;
|
||||
};
|
||||
|
||||
/* eMMC */
|
||||
&sd_emmc_c {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
|
||||
pinctrl-1 = <&emmc_clk_gate_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
mmc-ddr-1_8v;
|
||||
mmc-hs200-1_8v;
|
||||
max-frequency = <200000000>;
|
||||
disable-wp;
|
||||
|
||||
mmc-pwrseq = <&emmc_pwrseq>;
|
||||
vmmc-supply = <&vddao_3v3>;
|
||||
vqmmc-supply = <&emmc_1v8>;
|
||||
};
|
||||
|
||||
&tdmif_b {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -625,22 +219,3 @@
|
|||
&toddr_c {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart_AO {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&uart_ao_a_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&usb {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2_phy0 {
|
||||
phy-supply = <&dc_in>;
|
||||
};
|
||||
|
||||
&usb2_phy1 {
|
||||
/* Enable the hub which is connected to this port */
|
||||
phy-supply = <&vl_pwr_en>;
|
||||
};
|
||||
|
|
|
|||
435
arch/arm/dts/meson-sm1-bananapi.dtsi
Normal file
435
arch/arm/dts/meson-sm1-bananapi.dtsi
Normal file
|
|
@ -0,0 +1,435 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2021 BayLibre SAS
|
||||
* Author: Neil Armstrong <narmstrong@baylibre.com>
|
||||
*/
|
||||
|
||||
#include "meson-sm1.dtsi"
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/input/linux-event-codes.h>
|
||||
#include <dt-bindings/gpio/meson-g12a-gpio.h>
|
||||
|
||||
/ {
|
||||
adc-keys {
|
||||
compatible = "adc-keys";
|
||||
io-channels = <&saradc 2>;
|
||||
io-channel-names = "buttons";
|
||||
keyup-threshold-microvolt = <1800000>;
|
||||
|
||||
button-sw3 {
|
||||
label = "SW3";
|
||||
linux,code = <BTN_3>;
|
||||
press-threshold-microvolt = <1700000>;
|
||||
};
|
||||
};
|
||||
|
||||
aliases {
|
||||
serial0 = &uart_AO;
|
||||
ethernet0 = ðmac;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
emmc_pwrseq: emmc-pwrseq {
|
||||
compatible = "mmc-pwrseq-emmc";
|
||||
reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
key {
|
||||
label = "SW1";
|
||||
linux,code = <BTN_1>;
|
||||
gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
|
||||
interrupt-parent = <&gpio_intc>;
|
||||
interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
|
||||
};
|
||||
};
|
||||
|
||||
hdmi-connector {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi_connector_in: endpoint {
|
||||
remote-endpoint = <&hdmi_tx_tmds_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led-green {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-blue {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
};
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x0 0x0 0x40000000>;
|
||||
};
|
||||
|
||||
emmc_1v8: regulator-emmc_1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "EMMC_1V8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vddao_3v3>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
dc_in: regulator-dc_in {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "DC_IN";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vddio_c: regulator-vddio_c {
|
||||
compatible = "regulator-gpio";
|
||||
regulator-name = "VDDIO_C";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
enable-gpios = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
|
||||
gpios = <&gpio_ao GPIOAO_6 GPIO_OPEN_DRAIN>;
|
||||
gpios-states = <1>;
|
||||
|
||||
states = <1800000 0>,
|
||||
<3300000 1>;
|
||||
};
|
||||
|
||||
tflash_vdd: regulator-tflash_vdd {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "TFLASH_VDD";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&dc_in>;
|
||||
gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vddao_1v8: regulator-vddao_1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDDAO_1V8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vddao_3v3>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vddao_3v3: regulator-vddao_3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDDAO_3V3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&dc_in>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vddcpu: regulator-vddcpu {
|
||||
/*
|
||||
* SY8120B1ABC DC/DC Regulator.
|
||||
*/
|
||||
compatible = "pwm-regulator";
|
||||
|
||||
regulator-name = "VDDCPU";
|
||||
regulator-min-microvolt = <690000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
|
||||
pwm-supply = <&dc_in>;
|
||||
|
||||
pwms = <&pwm_AO_cd 1 1250 0>;
|
||||
pwm-dutycycle-range = <100 0>;
|
||||
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
/* USB Hub Power Enable */
|
||||
vl_pwr_en: regulator-vl_pwr_en {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VL_PWR_EN";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&dc_in>;
|
||||
|
||||
gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
};
|
||||
|
||||
&arb {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vddcpu>;
|
||||
operating-points-v2 = <&cpu_opp_table>;
|
||||
clocks = <&clkc CLKID_CPU_CLK>;
|
||||
clock-latency = <50000>;
|
||||
};
|
||||
|
||||
&cpu1 {
|
||||
cpu-supply = <&vddcpu>;
|
||||
operating-points-v2 = <&cpu_opp_table>;
|
||||
clocks = <&clkc CLKID_CPU1_CLK>;
|
||||
clock-latency = <50000>;
|
||||
};
|
||||
|
||||
&cpu2 {
|
||||
cpu-supply = <&vddcpu>;
|
||||
operating-points-v2 = <&cpu_opp_table>;
|
||||
clocks = <&clkc CLKID_CPU2_CLK>;
|
||||
clock-latency = <50000>;
|
||||
};
|
||||
|
||||
&cpu3 {
|
||||
cpu-supply = <&vddcpu>;
|
||||
operating-points-v2 = <&cpu_opp_table>;
|
||||
clocks = <&clkc CLKID_CPU3_CLK>;
|
||||
clock-latency = <50000>;
|
||||
};
|
||||
|
||||
&ext_mdio {
|
||||
external_phy: ethernet-phy@0 {
|
||||
/* Realtek RTL8211F (0x001cc916) */
|
||||
reg = <0>;
|
||||
max-speed = <1000>;
|
||||
|
||||
interrupt-parent = <&gpio_intc>;
|
||||
/* MAC_INTR on GPIOZ_14 */
|
||||
interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
ðmac {
|
||||
pinctrl-0 = <ð_pins>, <ð_rgmii_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
phy-mode = "rgmii-txid";
|
||||
phy-handle = <&external_phy>;
|
||||
};
|
||||
|
||||
&gpio {
|
||||
gpio-line-names =
|
||||
/* GPIOZ */
|
||||
"ETH_MDIO", /* GPIOZ_0 */
|
||||
"ETH_MDC", /* GPIOZ_1 */
|
||||
"ETH_RXCLK", /* GPIOZ_2 */
|
||||
"ETH_RX_DV", /* GPIOZ_3 */
|
||||
"ETH_RXD0", /* GPIOZ_4 */
|
||||
"ETH_RXD1", /* GPIOZ_5 */
|
||||
"ETH_RXD2", /* GPIOZ_6 */
|
||||
"ETH_RXD3", /* GPIOZ_7 */
|
||||
"ETH_TXCLK", /* GPIOZ_8 */
|
||||
"ETH_TXEN", /* GPIOZ_9 */
|
||||
"ETH_TXD0", /* GPIOZ_10 */
|
||||
"ETH_TXD1", /* GPIOZ_11 */
|
||||
"ETH_TXD2", /* GPIOZ_12 */
|
||||
"ETH_TXD3", /* GPIOZ_13 */
|
||||
"ETH_INTR", /* GPIOZ_14 */
|
||||
"ETH_NRST", /* GPIOZ_15 */
|
||||
/* GPIOH */
|
||||
"HDMI_SDA", /* GPIOH_0 */
|
||||
"HDMI_SCL", /* GPIOH_1 */
|
||||
"HDMI_HPD", /* GPIOH_2 */
|
||||
"HDMI_CEC", /* GPIOH_3 */
|
||||
"VL-RST_N", /* GPIOH_4 */
|
||||
"CON1-P36", /* GPIOH_5 */
|
||||
"VL-PWREN", /* GPIOH_6 */
|
||||
"WiFi_3V3_1V8", /* GPIOH_7 */
|
||||
"TFLASH_VDD_EN", /* GPIOH_8 */
|
||||
/* BOOT */
|
||||
"eMMC_D0", /* BOOT_0 */
|
||||
"eMMC_D1", /* BOOT_1 */
|
||||
"eMMC_D2", /* BOOT_2 */
|
||||
"eMMC_D3", /* BOOT_3 */
|
||||
"eMMC_D4", /* BOOT_4 */
|
||||
"eMMC_D5", /* BOOT_5 */
|
||||
"eMMC_D6", /* BOOT_6 */
|
||||
"eMMC_D7", /* BOOT_7 */
|
||||
"eMMC_CLK", /* BOOT_8 */
|
||||
"",
|
||||
"eMMC_CMD", /* BOOT_10 */
|
||||
"",
|
||||
"eMMC_RST#", /* BOOT_12 */
|
||||
"eMMC_DS", /* BOOT_13 */
|
||||
"", "",
|
||||
/* GPIOC */
|
||||
"SD_D0_B", /* GPIOC_0 */
|
||||
"SD_D1_B", /* GPIOC_1 */
|
||||
"SD_D2_B", /* GPIOC_2 */
|
||||
"SD_D3_B", /* GPIOC_3 */
|
||||
"SD_CLK_B", /* GPIOC_4 */
|
||||
"SD_CMD_B", /* GPIOC_5 */
|
||||
"CARD_EN_DET", /* GPIOC_6 */
|
||||
"",
|
||||
/* GPIOA */
|
||||
"", "", "", "", "", "", "", "",
|
||||
"", "", "", "", "", "",
|
||||
"CON1-P27", /* GPIOA_14 */
|
||||
"CON1-P28", /* GPIOA_15 */
|
||||
/* GPIOX */
|
||||
"CON1-P16", /* GPIOX_0 */
|
||||
"CON1-P18", /* GPIOX_1 */
|
||||
"CON1-P22", /* GPIOX_2 */
|
||||
"CON1-P11", /* GPIOX_3 */
|
||||
"CON1-P13", /* GPIOX_4 */
|
||||
"CON1-P07", /* GPIOX_5 */
|
||||
"CON1-P33", /* GPIOX_6 */
|
||||
"CON1-P15", /* GPIOX_7 */
|
||||
"CON1-P19", /* GPIOX_8 */
|
||||
"CON1-P21", /* GPIOX_9 */
|
||||
"CON1-P24", /* GPIOX_10 */
|
||||
"CON1-P23", /* GPIOX_11 */
|
||||
"CON1-P08", /* GPIOX_12 */
|
||||
"CON1-P10", /* GPIOX_13 */
|
||||
"CON1-P29", /* GPIOX_14 */
|
||||
"CON1-P31", /* GPIOX_15 */
|
||||
"CON1-P26", /* GPIOX_16 */
|
||||
"CON1-P03", /* GPIOX_17 */
|
||||
"CON1-P05", /* GPIOX_18 */
|
||||
"CON1-P32"; /* GPIOX_19 */
|
||||
|
||||
/*
|
||||
* WARNING: The USB Hub needs a reset signal to be turned high in
|
||||
* order to be detected by the USB Controller. This signal should
|
||||
* be handled by a USB specific power sequence to reset the Hub
|
||||
* when the USB bus is powered down.
|
||||
*/
|
||||
usb-hub-hog {
|
||||
gpio-hog;
|
||||
gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>;
|
||||
output-high;
|
||||
line-name = "usb-hub-reset";
|
||||
};
|
||||
};
|
||||
|
||||
&gpio_ao {
|
||||
gpio-line-names =
|
||||
/* GPIOAO */
|
||||
"DEBUG TX", /* GPIOAO_0 */
|
||||
"DEBUG RX", /* GPIOAO_1 */
|
||||
"SYS_LED2", /* GPIOAO_2 */
|
||||
"UPDATE_KEY", /* GPIOAO_3 */
|
||||
"CON1-P40", /* GPIOAO_4 */
|
||||
"IR_IN", /* GPIOAO_5 */
|
||||
"TF_3V3N_1V8_EN", /* GPIOAO_6 */
|
||||
"CON1-P35", /* GPIOAO_7 */
|
||||
"CON1-P12", /* GPIOAO_8 */
|
||||
"CON1-P37", /* GPIOAO_9 */
|
||||
"CON1-P38", /* GPIOAO_10 */
|
||||
"SYS_LED", /* GPIOAO_11 */
|
||||
/* GPIOE */
|
||||
"VDDEE_PWM", /* GPIOE_0 */
|
||||
"VDDCPU_PWM", /* GPIOE_1 */
|
||||
"TF_PWR_EN"; /* GPIOE_2 */
|
||||
};
|
||||
|
||||
&hdmi_tx {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
|
||||
pinctrl-names = "default";
|
||||
hdmi-supply = <&dc_in>;
|
||||
};
|
||||
|
||||
&hdmi_tx_tmds_port {
|
||||
hdmi_tx_tmds_out: endpoint {
|
||||
remote-endpoint = <&hdmi_connector_in>;
|
||||
};
|
||||
};
|
||||
|
||||
&ir {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&remote_input_ao_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&pwm_AO_cd {
|
||||
pinctrl-0 = <&pwm_ao_d_e_pins>;
|
||||
pinctrl-names = "default";
|
||||
clocks = <&xtal>;
|
||||
clock-names = "clkin1";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
status = "okay";
|
||||
vref-supply = <&vddao_1v8>;
|
||||
};
|
||||
|
||||
/* SD card */
|
||||
&sd_emmc_b {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&sdcard_c_pins>;
|
||||
pinctrl-1 = <&sdcard_clk_gate_c_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
max-frequency = <50000000>;
|
||||
disable-wp;
|
||||
|
||||
/* TOFIX: SD card is barely usable in SDR modes */
|
||||
|
||||
cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
|
||||
vmmc-supply = <&tflash_vdd>;
|
||||
vqmmc-supply = <&vddio_c>;
|
||||
};
|
||||
|
||||
/* eMMC */
|
||||
&sd_emmc_c {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
|
||||
pinctrl-1 = <&emmc_clk_gate_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
mmc-ddr-1_8v;
|
||||
mmc-hs200-1_8v;
|
||||
max-frequency = <200000000>;
|
||||
disable-wp;
|
||||
|
||||
mmc-pwrseq = <&emmc_pwrseq>;
|
||||
vmmc-supply = <&vddao_3v3>;
|
||||
vqmmc-supply = <&emmc_1v8>;
|
||||
};
|
||||
|
||||
&uart_AO {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&uart_ao_a_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&usb {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2_phy0 {
|
||||
phy-supply = <&dc_in>;
|
||||
};
|
||||
|
||||
&usb2_phy1 {
|
||||
/* Enable the hub which is connected to this port */
|
||||
phy-supply = <&vl_pwr_en>;
|
||||
};
|
||||
Loading…
Reference in a new issue