Commit graph

15537 commits

Author SHA1 Message Date
Tom Rini
fdffe6aae2 corenet_ds.h: Remove
This was missed when removing the platform.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-08-31 12:21:47 -04:00
Michael Walle
cb75d02ab1 board: lsxl: convert to DM_ETH
Just enabling the Kconfig option for DM_ETH and DM_MDIO is enough.
Additionally, we can remove the old hardcoded config.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-08-23 12:40:11 +02:00
Michael Walle
aa088beac3 board: lsxl: make last resort recovery more reliable
If something is wrong with the environment, we cannot rely on a proper
u-boot operation anymore. In fact, it is possible, that we never reach
misc_init_r() with a broken environment.

Also don't enable the netconsole by environment settings. This way the
user don't have to reconfigure the environment. Instead the network
console is only enabled when the push button is pressed during boot.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-08-23 12:40:00 +02:00
Michael Walle
f5631b2c84 board: lsxl: use proper *_r variables
Use the common kernel_addr_r, ramdisk_addr_r and fdt_addr_r variable
names.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-08-23 12:39:49 +02:00
Michael Walle
148b3aef9a board: lsxl: reorder image loading and remove ramdisk_len
We can load the ramdisk as the last step. This way we don't have to set
the intermediate variable 'ramdisk_len' and can remove it.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-08-23 12:39:45 +02:00
Michael Walle
111e1e110b board: lsxl: use CONFIG_DEFAULT_FDT_FILE
Drop our own CONFIG_FDTFILE handling in favor of the generic
CONFIG_DEFAULT_FDT_FILE one.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-08-23 12:39:41 +02:00
Michael Walle
857065403a board: lsxl: remove eraseenv script
This is not needed. The user can do a "env default -f -a".

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-08-23 12:39:22 +02:00
Tony Dinh
7875f8019c arm: kirkwood: nsa310s: Add Distro boot capability
- Add distro boot to board include file and deconfig file
- Miscellaneous changes:
	- Remove Gerald from maintainer list (email bounced)
	- Add CONFIG_SUPPORT_PASSING_ATAGS and friends to support legacy
	kernel method of booting (e.g. OpenWrt) with appended DTB.
	- Add CONFIG_UBIFS_SILENCE_MSG to reduce binary size.

Note that this patch is depended on the following patch:
https://patchwork.ozlabs.org/project/uboot/patch/20220807192709.21717-1-pali@kernel.org/

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
2022-08-23 12:35:37 +02:00
Tony Dinh
5a86d67e31 arm: kirkwood: pogo_v4: Add Distro boot capability
- Add distro boot to board include file and deconfig file
- Miscellaneous changes:
	- Add CONFIG_SUPPORT_PASSING_ATAGS and friends to support legacy
	kernel method of booting (e.g. OpenWrt) with appended DTB.
	- Add CONFIG_LTO and CONFIG_UBIFS_SILENCE_MSG, and disable some
	unused configs	to reduce binary size.

Note that this patch is depended on the following patch:
https://patchwork.ozlabs.org/project/uboot/patch/20220807192709.21717-1-pali@kernel.org/

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
2022-08-23 10:48:59 +02:00
Holger Brunck
845102cbe9 powerpc: remove support for kmtergr1 and MPC8309
The kmtegr1 board is out of maintenance and can be removed. As it is the
only board in the tree using MPC8309 the support for this CPU is dropped
completely.

Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>
2022-08-20 22:45:00 -04:00
Tom Rini
c50ff4a933 arm: Remove warp board
This board is missing migration to CONFIG_DM, which had a deadline of
v2020.01, which is now more than 2 years passed due.  Remove it.

Cc: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-20 22:45:00 -04:00
Tom Rini
6dcca22f77 ls1021aqds/ls1021aiot: Remove legacy non-DM_ETH code
Now that we are about to enable DM_ETH by default, remove legacy code.

Cc: Alison Wang <alison.wang@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-20 21:18:15 -04:00
Tom Rini
0040ed7e0c ppc: Remove corenet_ds boards
These boards have been orphaned for some time and are behind on various
DM migrations. Remove them.

Cc: Priyanka Jain <priyanka.jain@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-20 21:18:15 -04:00
Tom Rini
40463b9c4a arm: Remove kzm9g board
This board is behind on several mandatory DM migrations and is missing
OF_CONTROL support that makes other conversions impossible. Remove it.

Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Cc: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-20 21:18:15 -04:00
Tom Rini
0fb054b3f7 arm: Remove armadillo-800eva board
This board is behind on several mandatory DM migrations and is missing
OF_CONTROL support that makes other conversions impossible. Remove it.

Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-20 21:18:15 -04:00
Tom Rini
d8d5ab40d5 arm: Remove cm_t335 board
This board is behind on several mandatory DM migrations and is missing
OF_CONTROL support that makes other conversions impossible. Remove it.

Cc: Igor Grinberg <grinberg@compulab.co.il>
Cc: Nikita Kiryanov <nikita@compulab.co.il>
Cc: Uri Mashiach <uri.mashiach@compulab.co.il>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-20 21:18:15 -04:00
Tom Rini
5663b137e6 arm: Remove edminiv2 board
This board is not converted to use CONFIG_DM, well passed the migration
deadline.  Remove it.

Cc: Simon Guinot <simon.guinot@sequanux.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-08-20 21:18:15 -04:00
Camelia Groza
dfea459f20 board: ls1043ardb: fdt fixups for revision v7.0 boards
The LS1043ARDB rev v7.0 board replaces the AQR105 PHY on MAC9 with an
AQR113C PHY. The address of the PHY on the MDIO bus changes from 0x1 to
0x8. Enable CONFIG_OF_BOARD_FIXUP and update both u-boot and Linux device
trees to reflect this change.

Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
2022-08-16 17:07:33 +08:00
Tom Rini
ecf1d2741d net: Remove smc91111 ethernet driver
This driver has not been converted to DM_ETH.  The migration deadline
passed 2 years ago.

Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: David Feng <fenghua@phytium.com.cn>
Cc: Liviu Dudau <liviu.dudau@foss.arm.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Ramon Fried <rfried.dev@gmail.com>
2022-08-12 16:10:50 -04:00
Tom Rini
08f80184a9 arm: Remove snapper9260 board
This board is behind on several mandatory DM migrations and is missing
OF_CONTROL support that makes other conversions impossible. Remove it.

Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-08-12 16:10:50 -04:00
Tom Rini
7751f54f91 ppc: Remove ids8313 board
This board is behind on several mandatory DM migrations and is missing
OF_CONTROL support that makes other conversions impossible. Remove it.

Cc: Heiko Schocher <hs@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Heiko Schocher <hs@denx.de>
2022-08-12 16:10:50 -04:00
Tom Rini
40ed7be4af Convert CONFIG_SYS_FDT_PAD to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_FDT_PAD

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-08-12 16:10:50 -04:00
Tom Rini
ff4e87c030 Convert CONFIG_SYS_FSL_QMAN_V3 et al to Kconfig
This converts the following to Kconfig:
   CONFIG_FSL_NGPIXIS
   CONFIG_SYS_FSL_QMAN_V3
   CONFIG_SYS_FSL_RAID_ENGINE
   CONFIG_SYS_FSL_RMU
   CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
   CONFIG_SYS_FSL_SRIO_LIODN
   CONFIG_SYS_FSL_TBCLK_DIV
   CONFIG_SYS_FSL_USB1_PHY_ENABLE
   CONFIG_SYS_FSL_USB2_PHY_ENABLE
   CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE
   CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-12 16:10:49 -04:00
Tom Rini
7ae1e6a3a3 Convert CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-12 16:10:49 -04:00
Tom Rini
8b549c0b23 Remove CONFIG_SYS_FSL_SCFG_IODSECR1_ADDR et al
This removes the following symbols:
   CONFIG_SYS_FSL_DSPI_BE
   CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT
   CONFIG_SYS_FSL_DSP_CCSR_DDR_ADDR
   CONFIG_SYS_FSL_DSP_CCSR_DDR_OFFSET
   CONFIG_SYS_FSL_DSP_DDR_ADDR
   CONFIG_SYS_FSL_DSP_M2_RAM_ADDR
   CONFIG_SYS_FSL_DSP_M3_RAM_ADDR
   CONFIG_SYS_FSL_ERRATUM_A008751
   CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
   CONFIG_SYS_FSL_ESDHC_NUM
   CONFIG_SYS_FSL_ESDHC_P1010_BROKEN_SDCLK
   CONFIG_SYS_FSL_FM1_RX0_1G_OFFSET
   CONFIG_SYS_FSL_FM1_RX1_1G_OFFSET
   CONFIG_SYS_FSL_FM1_RX2_1G_OFFSET
   CONFIG_SYS_FSL_FM1_RX3_1G_OFFSET
   CONFIG_SYS_FSL_FM1_RX4_1G_OFFSET
   CONFIG_SYS_FSL_FM1_RX5_1G_OFFSET
   CONFIG_SYS_FSL_ISBC_VER
   CONFIG_SYS_FSL_QSPI_LE
   CONFIG_SYS_FSL_SCFG_IODSECR1_ADDR
   CONFIG_SYS_FSL_SCFG_IODSECR1_OFFSET
   CONFIG_SYS_FSL_SCFG_PIXCLKCR_OFFSET
   CONFIG_SYS_FSL_SCFG_PIXCLK_ADDR
   CONFIG_SYS_FSL_SRDS_NUM_PLLS
   CONFIG_SYS_FSL_WDOG_BE
   CONFIG_SYS_GP1DIR
   CONFIG_SYS_GP1ODR
   CONFIG_SYS_GP2DIR
   CONFIG_SYS_GP2ODR
   CONFIG_SYS_HALT_BEFOR_RAM_JUMP
   CONFIG_SYS_HMI_BASE
   FSL_QSPI_FLASH_NUM
   FSL_QSPI_FLASH_SIZE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-12 16:10:49 -04:00
Tom Rini
d0748898d8 Convert CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS
   CONFIG_SYS_FSL_OTHER_DDR_NUM_CTRLS

And we remove the entries from the README for a number of already
converted items.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-12 16:10:49 -04:00
Rasmus Villemoes
c62b74652a net: dwc_eth_qos: remove use of DWC_NET_PHYADDR
Only two boards in the tree set the macro DWC_NET_PHYADDR. Both have
CONFIG_DM_ETH_PHY=y, so should set the phy address in DT if necessary.

The imx8mp_evk does set the correct address in device tree.

The other board seems to be a copy-paste-adapt from an old
version of the imx8mp_evk config header, given the "#ifdef
CONFIG_DWC_ETH_QOS" block that has been removed from imx8mp_evk header
in commit 127fb45495. Its device tree doesn't even enable (i.e., set
'status = "okay"') the &eqos node. But the other ethernet device,
&fec, does get enabled, and does have a phy sitting at address 4 (and
it also has a corresponding legacy #define CONFIG_FEC_MXC_PHYADDR
4). So I believe it should be completely safe to remove it from there
as well.

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
[trini: Re-apply to top of tree, update imx93_evk.h]
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-08 10:50:20 -04:00
Tom Rini
78475d2572 Convert CONFIG_SYS_FSL_DDR_INTLV_256B to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_FSL_DDR_INTLV_256B

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-04 16:18:48 -04:00
Tom Rini
612f7a61d5 Convert CONFIG_FSL_MEMAC et al to Kconfig
This converts the following to Kconfig:
   CONFIG_FSL_MEMAC
   CONFIG_SYS_MEMAC_LITTLE_ENDIAN

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-04 16:18:48 -04:00
Tom Rini
6f6b9703d0 Convert CONFIG_FSL_CORENET to Kconfig
This converts the following to Kconfig:
   CONFIG_FSL_CORENET

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-04 16:18:47 -04:00
Tom Rini
13e28f4987 configs: Remove a number of unreferenced CONFIG options.
There are a large number of options under CONFIG_SYS (but some of these
are elsewhere, spotted while cleaning CONFIG_SYS) that are never
referenced, or only used slightly later in the config file.  Remove or
restructure these.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-04 16:18:47 -04:00
Tom Rini
1107dad820 Convert CONFIG_SYS_FLASH_QUIET_TEST to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_FLASH_QUIET_TEST

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-04 16:18:47 -04:00
Tom Rini
1db251bdd5 Convert CONFIG_SYS_MAX_FLASH_SECT to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_MAX_FLASH_SECT

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-04 16:18:47 -04:00
Tom Rini
1d3ecdac7e Convert CONFIG_FLASH_CFI_LEGACY to Kconfig
This converts the following to Kconfig:
   CONFIG_FLASH_CFI_LEGACY

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-04 16:18:47 -04:00
Tom Rini
5d68d2f41d Convert CONFIG_SYS_FLASH_ERASE_TOUT et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_FLASH_ERASE_TOUT
   CONFIG_SYS_FLASH_LOCK_TOUT
   CONFIG_SYS_FLASH_UNLOCK_TOUT
   CONFIG_SYS_FLASH_WRITE_TOUT

In practice, for two m68k platforms we move to hard-coding with a
comment the timeout values, rather than try and make convoluted Kconfig
logic.  We add options for the write and erase options to the pic32
flash driver, as this driver does make use of them.  Everywhere else
these are unreferenced values.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-04 16:18:47 -04:00
Tom Rini
90e9b3d335 Convert CONFIG_SYS_FLASH_CHECKSUM to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_FLASH_CHECKSUM

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-04 16:18:47 -04:00
Tom Rini
e2eca3e5c2 P1010RDB: Drop support for not-CONFIG_SYS_DDR_RAW_TIMING
All platforms today define CONFIG_SYS_DDR_RAW_TIMING, so drop the code
for this option being unset.

Cc: Qiang Zhao <qiang.zhao@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-04 16:18:47 -04:00
Tom Rini
90df583c64 malta: Switch to using CONFIG_SYS_SDRAM_SIZE
This is the only platform defining and using CONFIG_SYS_MEM_SIZE, switch
to using CONFIG_SYS_SDRAM_SIZE for consistency.

Cc: Paul Burton <paul.burton@mips.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-04 16:18:47 -04:00
Tom Rini
9a56ab96aa powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE
We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount
main memory available.  Rework CONFIG_SYS_DDR_SIZE, which described a
size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often
used as a number of bytes.  Use shifts of this option when required.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-04 16:18:47 -04:00
Tom Rini
b72713dc0b Convert CONFIG_SYS_FLASH_EMPTY_INFO to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_FLASH_EMPTY_INFO

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-04 16:18:47 -04:00
Tom Rini
52938fc4f0 net: Remove CONFIG_SYS_DIRECT_FLASH_TFTP
No platforms enable the functionality to tftp directly to NOR flash, and
this is discouraged by the documentation.  Remove this code.  Further,
this highlights an oddity of the code.  Un-indent the start of this
function.

Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-04 16:18:47 -04:00
Pali Rohár
3982e761dc board: freescale: p1_p2_rdb_pc: Simplify SPL offset macros
Now when CONFIG_SYS_TEXT_BASE has sane value, use it for calculation of
other SPL offset values: CONFIG_SPL_MAX_SIZE, CONFIG_SYS_MMC_U_BOOT_* and
CONFIG_SYS_SPI_FLASH_U_BOOT_* macros.

No functional change.

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-29 19:49:13 +08:00
Tom Rini
86feeab3dc u-boot-imx-20220726
-------------------
 
 i.MX for 2022.10
 
 - Added i.MX93 architecture
 
 CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/12891
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCYt/zWg8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76YODwCgh3JIzIi9pktCxKumx4JRS6UzwgsAn3HoXKI/
 2OEUjST1X/TI/lMFp0bw
 =EWT6
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20220726' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

u-boot-imx-20220726
-------------------

i.MX for 2022.10

- Added i.MX93 architecture

CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/12891
2022-07-26 10:26:00 -04:00
Peng Fan
86a179703c imx: imx93_evk: Add basic board support
Add basic board codes and defconfig for i.MX93 11x11 EVK board.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26 11:29:01 +02:00
Tim Harvey
a4a130651d configs: imx8mp_venice: remove unnecessary FEC_QUIRK_ENET_MAC
FEC_QUIRK_ENET_MAC is defined in the imx-regs.h include file and thus
does not need to be defined in the various board config includes.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-07-26 08:58:25 +02:00
Alexander Dahl
8c09cb6f4d fpga: Convert SYS_FPGA_PROG_FEEDBACK to Kconfig
This converts the following to Kconfig: SYS_FPGA_PROG_FEEDBACK

Signed-off-by: Alexander Dahl <ada@thorsis.com>
Link: https://lore.kernel.org/r/20220721133122.32428-3-ada@thorsis.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-07-26 08:39:43 +02:00
Sumit Garg
bf95d17809 board: qualcomm: Add support for QCS404 EVB
Add support for Qualcomm QCS404 SoC based evaluation board.

Features:
- Qualcomm Snapdragon QCS404 SoC
- 1GiB RAM
- 8GiB eMMC, uSD slot

U-boot is chain loaded by ABL in 64-bit mode as part of boot.img.
For detailed build and boot instructions, refer to
doc/board/qualcomm/qcs404.rst.

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
2022-07-25 13:02:04 -04:00
Sumit Garg
d35b211374 board: qualcomm: Add support for dragonboard845c
Add support for 96Boards Dragonboard 845C aka Robotics RB3 development
platform. This board complies with 96Boards Open Platform Specifications.

Features:
- Qualcomm Snapdragon SDA845 SoC
- 4GiB RAM
- 64GiB UFS drive

U-boot is chain loaded by ABL in 64-bit mode as part of boot.img.
For detailed build and boot instructions, refer to
doc/board/qualcomm/sdm845.rst, board: dragonboard845c.

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2022-07-25 13:02:04 -04:00
Mamta Shukla
1c3a8e7753 configs: imx8mm: Define CONFIG_SYS_UBOOT_BASE for i.MX8m
The macro `CONFIG_SYS_UBOOT_BASE` is used by SPL loaders `"NOR"` and
`"XIP"` to determine the base address of u-boot.

For `"NOR"` on i.MX8MM it is the base address of QSPI0 plus the offset
of the flattened image tree blob.
Although `QSPI0_AMBA_BASE` is used to define CONFIG_SYS_UBOOT_BASE in
multiple board header files for i.MX8MM, it is not specified.

Specify offset of flattened image tree blob (needs to be set to same
value as specified in 'binman' node), base address of QSPI0 and size of
FlexSPI configuration block.

Signed-off-by: Mamta Shukla <mamta.shukla@leica-geosystems.com>
Signed-off-by: Thomas Haemmerle <thomas.haemmerle@leica-geosystems.com>
Tested-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Andrey Zhizhikin  <andrey.zhizhikin@leica-geosystems.com>
2022-07-25 15:35:35 +02:00
Marek Behún
61143f741e treewide: Fix Marek's name and change my e-mail address
Fix diacritics in some instances of my name and change my e-mail address
to kabel@kernel.org.

Add corresponding .mailmap entries.

Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-07-21 10:14:04 +02:00
Pali Rohár
daa8857d53 arm: mvebu: a3720: Add NVMe to BOOT_TARGET_DEVICES list
Enable NVMe booting on boards which have enabled NVMe drivers.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-07-21 10:14:04 +02:00
Pali Rohár
3a57ad0957 arm: mvebu: a3720: Set BOOT_TARGET_DEVICES list to enabled peripherals
This allows to compile U-Boot without some boot option for some A3720 board
which does not have that peripheral.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-07-21 10:14:04 +02:00
Andre Przywara
9311843824 sunxi: configs: streamline include/configs/sun*.h wrappers
For mostly historic reasons we had configuration headers for each
Allwinner CPU "family". These days they are mostly just including one
common header, with the rest being somewhat empty.
There were attempts to remove them, and to just use the one common header
to begin with, but this has implications to the build system, which me
might not be ready for, yet.

To document this behaviour, and to avoid something sneaking in over
time, make those files all the same (minus the CPU family name and
the copyrights), and add a comment explaining that.
This makes it easier to just remove those files later on, when needed
and possible.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2022-07-18 11:25:09 +01:00
Tom Rini
54f683dbfb Merge https://source.denx.de/u-boot/custodians/u-boot-usb 2022-07-14 11:10:49 -04:00
Weijie Gao
4bc0104c97 mips: mtmips: add support for MediaTek MT7621 SoC
This patch adds support for MediaTek MT7621 SoC.
All files are dedicated for u-boot.

The default build target is u-boot-mt7621.bin.

The specification of this chip:
https://www.mediatek.com/products/homenetworking/mt7621

Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2022-07-13 23:03:37 +02:00
Tom Rini
357fa8bb4d - Alignment with Linux kernel device tree v5.19 for stm32mp15 and stm32mp13
- Add OP-TEE nodes for stm32mp13x, alligned with upstreamed OP-TEE
 - Introduce of_to_plat ops in stm32_sdmmc2 driver
 - Activate more features in stm32mp13 defconfig and support of STM32MP13x Rev.Y
 - Drop fastboot and stm32prog trigger gpios on STM32MP15x DHCOM board
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEE56Yx6b9SnloYCWtD4rK92eCqk3UFAmLNj88ACgkQ4rK92eCq
 k3Wukwf+PZnmQuyzwwFDOpZO1lUPfUN0WkoEBV8M5IxLehHdfHJT3YsAtm6DS8dd
 4+n0+WmR7Uk4B8ODRPrGNBJftFoOVfEAvWmpfCC/VcHgEDEzdJzJe6yxa9wAWeQR
 djRZLM8qx6OIEUW+sfYbFkD2BCv+cLiT0YH9qqx8WCRlf6JTuLquSBJQXIJAqYiE
 LdO/pp0rv4oC0s08BSL4bHL/Mh7FHeUPiEjn2uRP/vISgmH1qyCql3gbr/wCaTYR
 jfqr9pjmWTxEOppZIdE832QMy1MTSA/6Q3Jr4LKRko6ArBGjbGlj3EbeeEdKPDRy
 BtQ6OLnxWKdcPr2qp301nnERRi4L4w==
 =WgbW
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20220712' of https://source.denx.de/u-boot/custodians/u-boot-stm

- Alignment with Linux kernel device tree v5.19 for stm32mp15 and stm32mp13
- Add OP-TEE nodes for stm32mp13x, alligned with upstreamed OP-TEE
- Introduce of_to_plat ops in stm32_sdmmc2 driver
- Activate more features in stm32mp13 defconfig and support of STM32MP13x Rev.Y
- Drop fastboot and stm32prog trigger gpios on STM32MP15x DHCOM board
2022-07-13 08:09:20 -04:00
Rui Miguel Silva
018cdfc3d0 corstone1000: enable isp1763 usb controller and mmc
MPS3 board have a ISP1763 usb controller, enable it to be used
for mass storage access for example. Enable the usb command
also and for the FVP support for mass storage enable the mmc
command.

Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
2022-07-12 21:59:54 +02:00
Patrick Delaunay
eb67e63da4 configs: stm32mp13: Add support for baudrates higher than 115200
On STM32MP13x STMicroelectronics boards, the UART can reliably go up to
4000000 bauds when connected to the external ST-LINKV3.

This patch adds the support of higher baudrates on STMicroelectronics
STM32MP13x boards with ST-LINKV3.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-07-12 11:48:15 +02:00
Patrick Delaunay
6500c5760c configs: stm32m15: support STM32MP_BOARD_EXTRA_ENV for st boards
Correctly handle STM32MP_BOARD_EXTRA_ENV define in stm32mp15_st_common.h;
the STM32MP_BOARD_EXTRA_ENV is added in CONFIG_EXTRA_ENV_SETTINGS
definition, as it is done "stm32mp15_st_common.h"

Without this patch, the content of STM32MP_BOARD_EXTRA_ENV is not used in
the default environment for STMicroelectronics boards.

Fixes: 806c4dd315 ("configs: stm32mp1: set the console variable for extlinux.conf")
Reported-by: Gatien CHEVALLIER <gatien.chevallier@foss.st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-07-12 11:19:18 +02:00
Tom Rini
36b661dc91 Merge branch 'next' 2022-07-11 14:58:57 -04:00
Tom Rini
07ef80cd9d powerpc: Use the poison value of 0xdeadbeef directly in DDR init
On p1_p2_rdb_pc platforms, we set ddr_data_init to the "poison" value of
0xdeadbeef rather than a real calculated / derived value.  Do this
directly and comment rather than via CONFIG.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-08 17:57:34 -04:00
Tom Rini
cb42c1f9b1 i2c: Remove non-DM_I2C support from davinci_i2c.c
As the migration deadline has passed, and all platforms have been
migrated, remove the non-DM code here.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-08 17:57:34 -04:00
Tom Rini
edcbd6e388 omap3: emif4: More clearly hard-code cs0 size
We have a single platform that is both in the OMAP3 family of parts, but
has an EMIF4 memory controller.  Currently we hard-code the size of
chip select 0.  Make this more clear by putting the value in the
function rather than a CONFIG option.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-08 17:57:34 -04:00
Tom Rini
38d091ac1d Convert CONFIG_SYS_CACHE_STASHING to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_CACHE_STASHING

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-08 17:57:33 -04:00
Pali Rohár
e6ca148104 distroboot: Fix ubifs
Fix multiple issues in ubifs distroboot code:

U-Boot supports attaching only one MTD device as UBI at the time. So
always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume
${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part'
command attach MTD device always as UBI device ubi0.

Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command.
Distroboot scripts require ${bootfstype} variable to be properly set and it
is already set for all other boot types.

Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI
device does not have partitions, but has volumes. Distroboot scripts
require something to be set in ${distro_bootpart} variable, so set it to
the UBI volume which is currently mounted by ubifs.

Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code
differs from the other partition code that it requires "ubi" prefix before
number.

Explicitly unmount ubifs volume after loading all data from it. This allows
to detach UBI device from MTD device.

Move definition of MTD device with UBI and UBI volume with ubifs filesystem
from global env variables ${bootubipart} and ${bootubivol} into the
distroboot "func" macro, defined in board include config files. UBIFS
distroboot macros then set ${bootubipart} and ${bootubivol} local variables
for compatibility with existing distroboot scripts.

This last change allows to define more UBIFS target devices and make it
clear what is boot MTD/UBI device.

All board include config files are adjusted to use this new scheme of
specifying boot MTD/UBI device.

Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2022-07-08 09:05:47 -04:00
Tom Rini
c45568cc4e Convert CONFIG_SYS_BOOTM_LEN to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_BOOTM_LEN

As part of this, rework error handling in boot/bootm.c so that we pass
the buffer size to handle_decomp_error as CONFIG_SYS_BOOTM_LEN will not
be available to host tools but we do know the size that we passed to
malloc().

Cc: Soeren Moch <smoch@web.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-07 14:01:09 -04:00
Tom Rini
64a2a7b04b Convert CONFIG_SYS_BOOTCOUNT_LE et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_BOOTCOUNT_LE
   CONFIG_SYS_BOOTCOUNT_BE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-07 14:01:09 -04:00
Tom Rini
d9c4d66aef kmcoge5ne: Move BFTIC3 CONFIG references to their usage
We only reference CONFIG_SYS_BFTIC3_BASE in one location.  Move the
comment to where we reference it, and use the value directly.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Holger Brunck <holger.brunck@hitachienergy.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2022-07-07 14:01:09 -04:00
Tom Rini
56fc54ad06 mx*sabresd: Reference CONFIG_SYS_AUXCORE_BOOTDATA value directly
As this is used in the environment, reference it directly rather than as
a CONFIG value.

Cc: Fabio Estevam <festevam@gmail.com>
Cc: Adrian Alonso <adrian.alonso@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-07 14:01:09 -04:00
Tom Rini
f6c1f91761 Convert CONFIG_SYS_FSL_CPC et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_FSL_CPC
   CONFIG_SYS_CPC_REINIT_F

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-07 14:01:09 -04:00
Tom Rini
5a4461867c Convert CONFIG_SYS_RAMBOOT to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_RAMBOOT

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-07 14:01:08 -04:00
Tom Rini
3dab405b45 Convert CONFIG_SYS_BOOK3E_HV to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_BOOK3E_HV

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-07 09:29:56 -04:00
Tom Rini
fcf4fa71ab Convert CONFIG_SYS_83XX_DDR_USES_CS0 to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_83XX_DDR_USES_CS0

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-07 09:29:08 -04:00
Tom Rini
d9d4978143 thunerx_88xx: Clean up config slightly.
We don't use CONFIG_SYS_64BIT anywhere and can use
CONFIG_TARGET_THUNDERX_88XX to build the device trees.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-07 09:29:08 -04:00
Tom Rini
afe3378701 Convert CONFIG_PALMAS_POWER to Kconfig
This converts the following to Kconfig:
   CONFIG_PALMAS_POWER

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-07 09:29:08 -04:00
Tom Rini
2bb9d7c65a Convert CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
   CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
   CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-07 09:29:08 -04:00
Tom Rini
0d121ad6de Convert CONFIG_SYS_DISCOVER_PHY to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_DISCOVER_PHY

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-07 09:29:08 -04:00
Tom Rini
7675a526e0 Convert CONFIG_SYS_UNIFY_CACHE to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_UNIFY_CACHE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-07 09:29:08 -04:00
Tom Rini
f1c6dfa426 layerscape: Remove some unused CONFIG symbols
All of these symbols are not referenced anywhere else in the code, so
remove them.

Cc: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-07 09:29:08 -04:00
Tom Rini
ac8b36938a usb: Remove some unused CONFIG settings
On platforms that use CONFIG_USB_OHCI_NEW we do not need to set
CONFIG_SYS_USB_OHCI_REGS_BASE nor CONFIG_SYS_USB_OHCI_SLOT_NAME.  Drop
these from platforms that we can.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-07 09:29:08 -04:00
Tom Rini
dea25842ab usb: ohci-hcd: Remove some unused legacy code
At this point, the only user of ohci-hcd that also uses PCI is using DM,
so we can drop CONFIG_PCI_OHCI* usage.  No platforms set either of
CONFIG_SYS_USB_OHCI_BOARD_INIT or CONFIG_SYS_USB_OHCI_CPU_INIT so those
hooks can be removed as well.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-07 09:29:08 -04:00
Tom Rini
cd6a45a41f Convert CONFIG_USB_OHCI_NEW et al to Kconfig
This converts the following to Kconfig:
    CONFIG_SYS_OHCI_SWAP_REG_ACCESS
    CONFIG_SYS_USB_OHCI_CPU_INIT
    CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS
    CONFIG_SYS_USB_OHCI_SLOT_NAME
    CONFIG_USB_ATMEL
    CONFIG_USB_ATMEL_CLK_SEL_PLLB
    CONFIG_USB_ATMEL_CLK_SEL_UPLL
    CONFIG_USB_OHCI_LPC32XX
    CONFIG_USB_OHCI_NEW

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-07 09:29:08 -04:00
Tom Rini
abba59f115 Convert CONFIG_USB_XHCI_EXYNOS et al to Kconfig
This converts the following to Kconfig:
   CONFIG_USB_XHCI_EXYNOS
   CONFIG_USB_EHCI_EXYNOS

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-07 09:29:08 -04:00
Tom Rini
432243cee1 Convert CONFIG_KIRKWOOD_PCIE_INIT et al to Kconfig
This converts the following to Kconfig:
   CONFIG_KIRKWOOD_EGIGA_INIT
   CONFIG_KIRKWOOD_PCIE_INIT
   CONFIG_KIRKWOOD_RGMII_PAD_1V8
   CONFIG_KM_DISABLE_PCIE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:05:00 -04:00
Tom Rini
604c62f511 qemu-ppce500: Move CONFIG_SYS_PCI_MAP_{START, END} to board code
These CONFIG options are only used on this board, in the board file
itself.  Remove these from the CONFIG namespace and define in the board
file.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:05:00 -04:00
Tom Rini
363397ae1a Convert CONFIG_PCI_MSC01 to Kconfig
This converts the following to Kconfig:
   CONFIG_PCI_MSC01

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:05:00 -04:00
Tom Rini
1bc8ef4d70 socrates: Rework CONFIG_PCI_CLK_FREQ
The symbol CONFIG_PCI_CLK_FREQ is local to this board.  Provide equal
clarity in the code by referencing the numeric value directly and move
the explanatory comment to the code, just prior to use.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:05:00 -04:00
Tom Rini
31a8f5545e Convert CONFIG_SH7751_PCI to Kconfig
This converts the following to Kconfig:
   CONFIG_SH7751_PCI

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:05:00 -04:00
Tom Rini
9ee06d286a MPC837XERDB: Remove unused PCI defines
These defines aren't referenced in code today, remove them.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:05:00 -04:00
Tom Rini
e58eebb514 Convert CONFIG_PCI_CONFIG_HOST_BRIDGE to Kconfig
This converts the following to Kconfig:
   CONFIG_PCI_CONFIG_HOST_BRIDGE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:04:59 -04:00
Tom Rini
bf2c48fa1a Convert CONFIG_PCI_GT64120 to Kconfig
This converts the following to Kconfig:
   CONFIG_PCI_GT64120

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:04:59 -04:00
Tom Rini
f27bca4c27 Convert CONFIG_PCI_SCAN_SHOW to Kconfig
This converts the following to Kconfig:
   CONFIG_PCI_SCAN_SHOW

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:04:59 -04:00
Tom Rini
4e7860288c pci: Remove pci_sh4 and related defines.
This driver is not enabled anywhere, remove it.  Also remove definitions
of symbols only used in this driver, on platforms that did not enable
it.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:04:59 -04:00
Tom Rini
4547a1bc92 Convert CONFIG_PCIE_IMX to Kconfig
This converts the following to Kconfig:
   CONFIG_PCIE_IMX

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:04:59 -04:00
Tom Rini
3dc2987f5c Convert CONFIG_PCIE1 et al to Kconfig
This converts the following to Kconfig:
   CONFIG_PCIE1
   CONFIG_PCIE2
   CONFIG_PCIE3
   CONFIG_PCIE4
   CONFIG_PCI1

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:04:59 -04:00
Tom Rini
a552ffc9d2 Convert CONFIG_LAYERSCAPE_NS_ACCESS to Kconfig
This converts the following to Kconfig:
   CONFIG_LAYERSCAPE_NS_ACCESS

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:04:53 -04:00
Tom Rini
5d7f601480 lcd: Remove legacy CONFIG_FB_ADDR code
No platforms set both CONFIG_LCD and CONFIG_FB_ADDR at this time, drop
this legacy code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:04:40 -04:00
Tom Rini
d8e8461709 Convert CONFIG_FSL_FIXED_MMC_LOCATION et al to Kconfig
This converts the following to Kconfig:
   CONFIG_FSL_FIXED_MMC_LOCATION
   CONFIG_ESDHC_HC_BLK_ADDR

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:04:40 -04:00
Tom Rini
f4cd75e96a powerpc: Clean up CHAIN_OF_TRUST related options
As things stand currently, there is only one PowerPC platform that
enables the options for CHAIN_OF_TRUST.  From the board header files,
remove a number of never-set options.  Remove board specific values from
arch/powerpc/include/asm/fsl_secure_boot.h as well.  Rework
include/config_fsl_chain_trust.h to not abuse the CONFIG namespace for
constructing CHAIN_BOOT_CMD.  Migrate all of the configurable addresses
to Kconfig.

If any platforms are re-introduced with secure boot support, everything
required should still be here, but now in Kconfig, or requires migration
of an option to Kconfig.

Cc: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:04:15 -04:00
Tom Rini
7e7d04aecb Convert CONFIG_ESDHC_DETECT_QUIRK to Kconfig
This converts the following to Kconfig:
   CONFIG_ESDHC_DETECT_QUIRK

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:03:46 -04:00
Tom Rini
f96096d0dc Convert CONFIG_EXTRA_CLOCK to Kconfig
This converts the following to Kconfig:
   CONFIG_EXTRA_CLOCK

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:03:01 -04:00
Tom Rini
c24e8e2bb3 Convert CONFIG_SYS_DDR_RAW_TIMING to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_DDR_RAW_TIMING

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:03:01 -04:00
Tom Rini
bca4509d57 Convert CONFIG_SYS_SPD_BUS_NUM to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_SPD_BUS_NUM

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:03:01 -04:00
Tom Rini
1f7e2fc324 Convert CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR to Kconfig
This converts the following to Kconfig:
   CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:03:01 -04:00
Tom Rini
b68ba0e0eb Convert CONFIG_USB_GADGET_DWC2_OTG_PHY to Kconfig
This converts the following to Kconfig:
   CONFIG_USB_GADGET_DWC2_OTG_PHY

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:03:01 -04:00
Tom Rini
dd4bf24445 Convert CONFIG_USE_ONENAND_BOARD_INIT to Kconfig
This converts the following to Kconfig:
   CONFIG_USE_ONENAND_BOARD_INIT

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:03:01 -04:00
Tom Rini
ddd39d0cc1 Convert CONFIG_SAMSUNG_ONENAND to Kconfig
This converts the following to Kconfig:
   CONFIG_SAMSUNG_ONENAND

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2022-07-05 17:03:01 -04:00
Tom Rini
de0a732915 Rename CONFIG_PWM to CONFIG_PWM_S5P and move to Kconfig
We rename the S5P specific "CONFIG_PWM" to CONFIG_PWM_S5P and move it to
Kconfig.  Given the usage of CONFIG_PWM_NX, we have that select this new
symbol.

Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2022-07-05 17:03:01 -04:00
Tom Rini
d398b29aa0 smdkc100: Remove some unused options
There are a few options we test and set and then never reference, remove
them.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:03:01 -04:00
Tom Rini
140f0aa0de nxp: Cleanup some emulator related options.
- Drop the emulator CONFIG test from include/configs/ls1088ardb.h
- Migrate CONFIG_SYS_FSL_DDR_EMU to a select'able option in
  drivers/ddr/fsl/Kconfig

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:03:01 -04:00
Tom Rini
0285455d90 watchdog: designware: Make this depend on WDT
As this driver can dynamically determine the values set in
CONFIG_DW_WDT_BASE when using WDT, so make this depend on WDT rather
than migrate CONFIG_DW_WDT_BASE to Kconfig.

Cc: Chee Tien Fong <tien.fong.chee@intel.com>
Cc: Chin-Liang See <chin.liang.see@intel.com>
Cc: Dinh Nguyen <dinh.nguyen@intel.com>
Cc: Holger Brunck <holger.brunck@hitachienergy.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Siew Chin Lim <elly.siew.chin.lim@intel.com>
Cc: Stefan Roese <sr@denx.de>
Cc: hee Hong Ang <chee.hong.ang@intel.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-07-05 17:03:01 -04:00
Tom Rini
fbc3621fb5 Convert CONFIG_ENABLE_36BIT_PHYS to Kconfig
This converts the following to Kconfig:
   CONFIG_ENABLE_36BIT_PHYS

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:03:01 -04:00
Tom Rini
69a2bb6321 net: designware: Rename CONFIG_DW_GMAC_DEFAULT_DMA_PBL to GMAC_DEFAULT_DMA_PBL
This value is always used at the default, rename it for now.  This
likely should come from the device tree if non-default, moving forward.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:03:01 -04:00
Tom Rini
89d888ed6d Convert CONFIG_DW_ALTDESCRIPTOR to Kconfig
This converts the following to Kconfig:
   CONFIG_DW_ALTDESCRIPTOR

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:03:01 -04:00
Pali Rohár
6b74cfdcee board: freescale: p1_p2_rdb_pc: Remove mapping for TDM-PMC card
From whole P1/P2 family of RDB boards is TDM-PMC card (PCI Mezzanine Card,
Freescale PQ-MDS-T1) available only on P1021RDB and P1025RDB boards.

So address mapping for TDM-PMC card on LBC should not be enabled on any
other P1/P2 RDB board as there is no device at that TDM-PMC address.

Support for P1021RDB and P1025RDB boards was already removed from mainline
U-Boot in commits 6d1dd76afe ("board/freescale: Remove P1021RDB board
support") and d521cece5a ("board/freescale: Remove P1025RDB board
support").

So do not enable TDM-PMC address mapping on remaining P1/P2 RDB boards and
remove all macros related to TDM-PMC address mappings.

Signed-off-by: Pali Rohár <pali@kernel.org>
2022-07-03 15:13:51 +08:00
Tom Rini
9fcc2fb3fe Merge commit 'ef5ba2cef4a08b68caaa9215fcac142d3025bbf7' of https://github.com/tienfong/uboot_mainline 2022-07-01 09:14:32 -04:00
Paweł Anikiel
61298270c5 config: Add Chameleonv3 config
Add defconfig and Kconfig files for Google Chameleon V3 board

Signed-off-by: Paweł Anikiel <pan@semihalf.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-07-01 14:57:14 +08:00
Johan Jonker
43c084ccbc rockchip: include: configs: remove unused configs for tag and size
The configs ROCKCHIP_CHIP_TAG and ROCKCHIP_MAX_INIT_SIZE were
originally added with rksd.c, rkspi.c and rkcommon.c in mind,
but are no longer in use and replaced by struct spl_info,
so remove unused configs for tag and size.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-06-29 11:27:56 +08:00
Tom Rini
613c326581 gw_ventana: Migrate to using CONFIG_EXTRA_ENV_TEXT
Move the environment text over from being set via
CONFIG_EXTRA_ENV_SETTINGS in include/configs/gw_ventana.h and over
to plain text in board/gateworks/gw_ventana/gw_ventana.env.  This lets
us drop CONFIG_EXTRA_ENV_SETTINGS_COMMON as everything resides in a
single environment file now.

Cc: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Tim Harvey <tharvey@gateworks.com>
2022-06-28 17:11:49 -04:00
Tom Rini
a331017c23 Complete migration of MTDPARTS_DEFAULT / MTDIDS_DEFAULT, include in environment
- Ensure that everyone setting mtdids= and mtdparts= is doing so via the
  CONFIG options.
- If the CONFIG options are set, ensure that the default environment
  sets mtdparts / mtdids.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:11:49 -04:00
Tom Rini
bf904ea418 Rename CONFIG_SYS_AUTOLAOD to CONFIG_SYS_DISABLE_AUTOLOAD
The "autoload" environment variable is always checked with env_get_yesno
as it can be set to any form of no.  The default behavior of
env_get_yesno is to return -1 on variables that are not set, which acts
as true in general (we test for non-zero return).  To convert
CONFIG_SYS_AUTOLOAD to Kconfig, given that it was almost always used to
set autoload to no, first rename to CONFIG_SYS_DISABLE_AUTOLOAD for
consistency sake.  Then, make it so that if enabled we set autoload=0 in
the default environment.  Migrate all platforms which set
CONFIG_SYS_AUTOLOAD to non-true or that set autoload to false in their
default environment to using CONFIG_SYS_DISABLE_AUTOLOAD

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:11:49 -04:00
Tom Rini
d8564e919d opos6uldev: Migrate to using CONFIG_EXTRA_ENV_TEXT
Move the environment text over from being set via
CONFIG_EXTRA_ENV_SETTINGS in include/configs/opos6uldev.h and over to
plain text in board/armadeus/opos6uldev/opos6uldev.env.  This lets us
manage env_version without a CONFIG variable.

Cc: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:11:48 -04:00
Tom Rini
5d7dea1400 Convert CONFIG_ENV_RANGE to Kconfig
This converts the following to Kconfig:
   CONFIG_ENV_RANGE

Now that this is in Kconfig we can enforce a minimum size and so remove
the check in C code to ensure range is larger than size.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:11:48 -04:00
Tom Rini
5c3f6a3206 dragonboard410c: Migrate to using CONFIG_EXTRA_ENV_TEXT
With the exception of distro_boot support, we can move all of the rest
of the environment changes to come from CONFIG_EXTRA_ENV_TEXT and in
turn remove CONFIG_ENV_REFLASH.

Cc: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:11:48 -04:00
Tom Rini
5dbf320bef Convert CONFIG_SYS_USB_FAT_BOOT_PARTITION to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_USB_FAT_BOOT_PARTITION

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:11:48 -04:00
Tom Rini
3371eddaa1 Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig
This converts the following to Kconfig:
   CONFIG_USB_MAX_CONTROLLER_COUNT

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:11:48 -04:00
Tom Rini
6e52cb259b Convert CONFIG_FPGA_STRATIX_V to Kconfig
This converts the following to Kconfig:
   CONFIG_FPGA_STRATIX_V

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:11:48 -04:00
Tom Rini
60d45642fe fpga: Remove CONFIG_FPGA_COUNT
This define is only currently used in a single board, and always set to
one.  Define this within the board code and remove other references.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:11:48 -04:00
Tom Rini
82e0b51ccb Convert CONFIG_ENV_MIN_ENTRIES et al to Kconfig
This converts the following to Kconfig:
   CONFIG_ENV_MIN_ENTRIES
   CONFIG_ENV_MAX_ENTRIES

Cc: Michal Simek <michal.simek@amd.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:11:48 -04:00
Tom Rini
910feb50d4 Globally remove most CONFIG_SPL_BUILD tests from config headers
With the exception of how PowerPC handles SPL and TPL (which has its own
issues), we cannot safely hide options under CONFIG_SPL_BUILD.  Largely
remove the places that have this test today.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:11:48 -04:00
Tom Rini
de47ff5363 Convert CONFIG_SYS_MPC85XX_NO_RESETVEC to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_MPC85XX_NO_RESETVEC

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:11:48 -04:00
Tom Rini
5e5744cb2c Remove CONFIG_SPL_RAW_IMAGE_ARM_TRUSTED_FIRMWARE and CONFIG_SPL_ABORT_ON_RAW_IMAGE
These symbols do not exist in mainline, remove them.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:05:52 -04:00
Tom Rini
3a21d45d33 siemens: Move CONFIG_FACTORYSET to Kconfig
Introduce board/siemens/common/Kconfig and have it hold FACTORYSET to
start with.  Use select for this on the boards that need it.

Cc: Anatolij Gustschin <agust@denx.de>
Cc: Samuel Egli <samuel.egli@siemens.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:04:38 -04:00
Tom Rini
4d2cab33d4 video: Migrate exynos display options to Kconfig
Following how it's done for the majority of drivers, add a new
VIDEO_EXYNOS option and Kconfig file under drivers/video/exynos and list
the current options there.

Cc: Anatolij Gustschin <agust@denx.de>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
2022-06-28 17:04:38 -04:00
Tom Rini
24ec3dea4b arm: samsung: Migrate a number of symbols to Kconfig
- In a number of cases, use CONFIG_ARCH_EXYNOS[45] rather than
  CONFIG_EXYNOS[45]
- In other cases, test for CONFIG_ARCH_EXYNOS or CONFIG_ARCH_S5PC1XX
- Migrate specific SoC CONFIG values to Kconfig
- Use CONFIG_TARGET_x rather than CONFIG_x
- Migrate other CONFIG_EXYNOS_x symbols to Kconfig
- Reference CONFIG_EXYNOS_RELOCATE_CODE_BASE directly as EXYNOS_RELOCATE_CODE_BASE
- Rename CONFIG_S5P_PA_SYSRAM to CONFIG_SMP_PEN_ADDR to match the rest
  of U-Boot usage.

Cc: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:04:37 -04:00
Tom Rini
dc2d27ae72 arm: samsung: Remove dead LCD code
Since bb5930d5c9 ("exynos: video: Convert several boards to driver
model for video") there have been no callers of any of the exynos_lcd_*
family of functions.  Remove these from the boards, and then remove
unused logo and related code as well.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
2022-06-28 17:03:32 -04:00
Tom Rini
713a8cbb94 block: ide: Remove ide_preinit function
The only platform currently that defines an ide_preinit function has an
empty one that immediately returns.  Remove this hook.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:03:32 -04:00
Tom Rini
aca1f6789a Convert CONFIG_LBA48 et al to Kconfig
This converts the following to Kconfig:
   CONFIG_LBA48
   CONFIG_SYS_64BIT_LBA

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:03:32 -04:00
Tom Rini
0a816d92d5 Convert CONFIG_FSL_SATA_V2 to Kconfig
This converts the following to Kconfig:
   CONFIG_FSL_SATA_V2

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:03:31 -04:00
Tom Rini
21af94f882 ata: fsl_sata: Remove legacy non-BLK code
The migration deadline for this has passed and all boards have been
updated, remove this legacy code and references for it.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:03:31 -04:00
Tom Rini
7b976f7a0b ata: dwc_ahsata: Remove legacy non-CONFIG_AHCI code
The migration deadline for this has passed and all boards have been
updated, remove this legacy code and references for it.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:03:31 -04:00
Tom Rini
d64d338fcc xtensa: Switch to using CONFIG_XTENSA for building device trees
The only use of CONFIG_XTFPGA was to build all of the in-tree device
trees.  Switch to using CONFIG_XTENSA instead of a non-Kconfig symbol.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:03:31 -04:00
Tom Rini
0a4fcb2abc PowerPC: Remove some unused USB code
These particular code paths aren't used anymore, remove.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:03:31 -04:00
Tom Rini
7ef53a3dc6 Convert CONFIG_TEGRA_GPU to Kconfig
This converts the following to Kconfig:
   CONFIG_TEGRA_GPU

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:03:31 -04:00
Tom Rini
d4ae15260b Convert CONFIG_USB_EHCI_TXFIFO_THRESH to Kconfig
This converts the following to Kconfig:
   CONFIG_USB_EHCI_TXFIFO_THRESH

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:03:31 -04:00
Tom Rini
5cc1d9214a Convert CONFIG_HAS_FSL_DR_USB to Kconfig
This converts the following to Kconfig:
   CONFIG_HAS_FSL_DR_USB

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:03:31 -04:00
Tom Rini
e78e880da9 Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig
This converts the following to Kconfig:
   CONFIG_EHCI_HCD_INIT_AFTER_RESET

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:03:31 -04:00
Tom Rini
879b0b16de Convert CONFIG_EHCI_DESC_BIG_ENDIAN et al to Kconfig
This converts the following to Kconfig:
   CONFIG_EHCI_DESC_BIG_ENDIAN
   CONFIG_EHCI_MMIO_BIG_ENDIAN

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:03:31 -04:00
Tom Rini
90bb5c08c8 ehci-mxs: Remove non-DM code
This code is not enabled anywhere, drop it.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:03:30 -04:00
Tom Rini
d6e9efa6b2 Convert CONFIG_EFLASH_PROTSECTORS to Kconfig
This converts the following to Kconfig:
   CONFIG_EFLASH_PROTSECTORS

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:03:30 -04:00
Tom Rini
5c511ea936 Convert CONFIG_E1000_NO_NVM to Kconfig
This converts the following to Kconfig:
   CONFIG_E1000_NO_NVM

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:03:30 -04:00
Dario Binacchi
0c4db621e2 configs: imx8mn_bsh_smm_s2: add mtdparts to bootargs
Passing the mtdparts environment variable to the Linux kernel is
required to properly mount the UBI rootfs.

Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
2022-06-28 15:51:56 -04:00
Dario Binacchi
bede82f750 configs: imx8mn_bsh_smm_s2: remove console from bootargs
The Linux kernel device tree already specifies the device to be used for
boot console output with a stdout-path property under /chosen.

Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
2022-06-28 15:51:56 -04:00
Marek Vasut
b70c34224e ARM: imx: Switch Data Modul i.MX8M Mini eDM SBC to USB251x Hub driver
Replace the ad-hoc I2C register programming scripted in board
environment with U-Boot DM driver.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-06-28 15:24:31 +02:00
Tom Rini
c316ee674f Xilinx changes for v2022.10
cpu:
 - Add driver for microblaze cpu
 
 net:
 - Add support for DM_ETH_PHY to AXI emac and emaclite
 
 xilinx:
 - Switch platforms to DM_ETH_PHY
 - DT chagnes in ZynqMP and Zynq
 - Enable support for SquashFS
 
 zynqmp:
 - Add support for KR260 boards
 - Move BSS from address 0
 - Move platform identification from board code to soc driver
 - Improve zynqmp_psu_init_minimize
 
 versal:
 - Enable loading app at EL1
 
 serial:
 - Setup default address and clock rates for DEBUG uarts
 
 pinctrl:
 - Add support for tri state and output enable properties
 
 relocate-rela:
 - Clean relocate-rela implementation for ARM64
 - Add support for Microblaze
 
 microblaze:
 - Add support for runtime relocation
 - Rework cache handling (wiring, Kconfig) based on cpuinfo
 - Remove interrupt support
 
 timer:
 - Extract axi timer driver from Microblaze to generic location
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCYrlYngAKCRDKSWXLKUoM
 ITgbAJ9S9xO2QqxtuodWAYMtJfvZ14c7mgCeKnyFTrrBnJkC0wPsGqE71oNJ49o=
 =3gGm
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2022.10' of https://source.denx.de/u-boot/custodians/u-boot-microblaze into next

Xilinx changes for v2022.10

cpu:
- Add driver for microblaze cpu

net:
- Add support for DM_ETH_PHY to AXI emac and emaclite

xilinx:
- Switch platforms to DM_ETH_PHY
- DT chagnes in ZynqMP and Zynq
- Enable support for SquashFS

zynqmp:
- Add support for KR260 boards
- Move BSS from address 0
- Move platform identification from board code to soc driver
- Improve zynqmp_psu_init_minimize

versal:
- Enable loading app at EL1

serial:
- Setup default address and clock rates for DEBUG uarts

pinctrl:
- Add support for tri state and output enable properties

relocate-rela:
- Clean relocate-rela implementation for ARM64
- Add support for Microblaze

microblaze:
- Add support for runtime relocation
- Rework cache handling (wiring, Kconfig) based on cpuinfo
- Remove interrupt support

timer:
- Extract axi timer driver from Microblaze to generic location
2022-06-27 10:15:50 -04:00
Ovidiu Panait
84488fc693 microblaze: cache: introduce Kconfig options for icache/dcache sizes
Replace XILINX_DCACHE_BYTE_SIZE macro with two Kconfig symbols for
instruction and data caches sizes, respectively:
CONFIG_XILINX_MICROBLAZE0_ICACHE_SIZE
CONFIG_XILINX_MICROBLAZE0_DCACHE_SIZE

Also, get rid of the hardcoded value in icache_disable().

Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
Link: https://lore.kernel.org/r/20220531181435.3473549-8-ovpanait@gmail.com
Signed-off-by: Michal Simek <michal.simek@amd.com> (s/bralid/brlid/g)
2022-06-24 14:16:00 +02:00
Michal Simek
aa0799eb67 microblaze: Fix early stack allocation
CONFIG_SYS_INIT_SP_OFFSET macro place stack to TEXT_BASE - SYS_MALLOC_F_LEN
but there is no reason to do it now because board_init_f_alloc_reserve()
returns exact location where stack should be. That's why stack location is
calculated at run time and there is no need to hardcode it via macro. This
change will help with placing U-Boot to any address.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/e9aee69646e022fd8a96cbee2d2a07ab81fb6e05.1655299267.git.michal.simek@amd.com
2022-06-24 14:14:59 +02:00
Stefan Herbrechtsmeier
ff5d9065ed xilinx: zynqmp: Do not use 0 as spl bss start address
Do not use 0 as address for memory because of the special meaning for
pointers (null pointer). Change the spl bss start address to the second
page.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Link: https://lore.kernel.org/r/20220607074314.27125-1-stefan.herbrechtsmeier-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-24 14:11:06 +02:00
Tom Rini
929e581a62 corstone1000: Convert to text file environment
Convert this platform to using the text file environment rather than
defining CONFIG_EXTRA_ENV_SETTINGS.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-22 21:30:05 -04:00
Tom Rini
781a144a7a gxp: Convert to text file environment
Convert this platform to using the text file environment rather than
defining CONFIG_EXTRA_ENV_SETTINGS.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-22 21:30:05 -04:00
Nick Hawkins
79c6c38102 configs: gxp: add core support
Add the include file for the gxp soc.

Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
2022-06-22 21:30:05 -04:00
Rui Miguel Silva
f98457d70a arm: add support to corstone1000 platform
Corstone1000 is a platform from arm, which includes pre
verified Corstone SSE710 sub-system that combines Cortex-A and
Cortex-M processors [0].

This code adds the support for the Cortex-A35 implementation
at host side, it contains also the necessary bits to support
the Corstone 1000 FVP (Fixed Virtual Platform) [1] and also the
FPGA MPS3 board implementation of this platform. [2]

0: https://developer.arm.com/documentation/102360/0000
1: https://developer.arm.com/tools-and-software/open-source-software/arm-platforms-software/arm-ecosystem-fvps
2: https://developer.arm.com/documentation/dai0550/c/

Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2022-06-22 12:35:15 -04:00
Anthoine Bourgeois
49df685d32 ARM: dts: omap3-devkit8000: Add support for Devkit8000
This commit adds OMAP3 BeagleBoard devicetree files from Linux
v5.16.0.
This commit fixes CONFIG_DM_MMC warning.

v3: patch clean-up

Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
2022-06-22 10:58:26 -04:00
Tom Rini
52af0101be Merge branch 'master' into next
Merge in v2022.07-rc5.
2022-06-20 14:40:59 -04:00
Tom Rini
2f7821a927 - Add STM32MP13 SoCs support with associated board STM32M135F-DK
- Correct livetree support in stm32mp1 boards
 - Activate livetree for stm32mp15 DHSOM boards
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEE56Yx6b9SnloYCWtD4rK92eCqk3UFAmKsehgACgkQ4rK92eCq
 k3UexAf+JThCd7FlN3OkTVKIdZKeNm2KpQxrqt20whiqp/nSUzxXrjdlCTKZEER2
 lLJoVnwr+bkmdlqsa6gAZXSsd0lUv37XnLsLA5or278tFNlKp6gzYrz49FR59mVC
 ie7/NlY5FgM5qmKGCob7tjwJ78r2/S3T2EaLiAMWUmw2UB5KZU6h3napHZ+1T0se
 vaEAVRzAaZeYzKU3k6RBSv2tXQ6ssvfpp9RcXpRGtrN908AqDhHiOfntuOrnsEe0
 9rjY1DSXO9a5WqHRm2KQ3FrA/By2layQ+4WH/HgIPHasisnmo3E/euVWmhtTaiT/
 g5bOLwyFQ2/RvdMlMxXlKUcuMfNwRA==
 =Hhzj
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20220620' of https://source.denx.de/u-boot/custodians/u-boot-stm into next

- Add STM32MP13 SoCs support with associated board STM32M135F-DK
- Correct livetree support in stm32mp1 boards
- Activate livetree for stm32mp15 DHSOM boards
2022-06-20 08:09:24 -04:00
Michael Walle
7bc683afda board: sl28: rename include guard macro
Avoid name clashes with an include file on board level.

Signed-off-by: Michael Walle <michael@walle.cc>
2022-06-20 15:52:45 +08:00
Pali Rohár
676f682bad board: freescale: p1_p2_rdb_pc: Move boot reset macros to p1_p2_bootsrc.h
Code for changing boot source is platform generic and can be used by any
P1* and P2* compatible RDB board. Not only by boards which use config
header file p1_p2_rdb_pc.h.

So move this code from p1_p2_rdb_pc.h to p1_p2_bootsrc.h and cleanup macros
for generating boot source env variables in CONFIG_EXTRA_ENV_SETTINGS.

This allows to use code for resetting board and rebooting to other boot
source also by other boards in future.

Signed-off-by: Pali Rohár <pali@kernel.org>
2022-06-20 15:52:45 +08:00
Tom Rini
f0843e0c0a Merge commit '32e0379143b433e29d76404f5f4c279067e48853' of https://github.com/tienfong/uboot_mainline 2022-06-17 09:35:28 -04:00
Patrick Delaunay
eae488b779 stm32mp1: fix reference for STMicroelectronics
Replace reference to the correct name STMicroelectronics

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-06-17 14:12:27 +02:00
Patrick Delaunay
5c9ea94da9 configs: stm32mp: cleanup the stm32mp15 file
Remove STM32_SYSRAM_END and clean the comments in stm32mp15_common.h file
after moving some CONFIG to Kconfig: CONFIG_SYS_CBSIZE,
CONFIG_SPL_MAX_FOOTPRINT, CONFIG_SYS_SPL_MALLOC_START and
CONFIG_SYS_SPL_MALLOC_SIZE.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-06-17 14:12:27 +02:00
Patrick Delaunay
960debbe3c arm: stm32mp: add support of STM32MP13x
Introduce the code in mach-stm32mp and the configuration file
stm32mp13_defconfig for the new STM32MP family.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-06-17 09:58:21 +02:00
Tom Rini
e744bf3a4b odroid_xu3: Fix board environment variable
When migrating CONFIG_CONS_INDEX to Kconfig, on this platform we changed
what "board" evaluated to in the environment.  This in turn meant that
we would no longer try and find the correct fdtfile via the normal
distro boot logic.  Fix this by overriding board in the default
environment, as done on other platforms where CONFIG_SYS_BOARD is not
what we want to be in the board environment variable.

Fixes: f76750d111 ("Convert CONFIG_CONS_INDEX et al to Kconfig")
Reported-by: Gabriel Hojda <ghojda@yo2urs.ro>
Tested-by: Gabriel Hojda <ghojda@yo2urs.ro>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-16 15:22:55 -04:00
Marek Vasut
163863d572 arm: socfpga: vining: Unmount UBIFS and detach UBI in ubi_load script
Clean up in ubiload script. Unmount UBIFS from which kernel image was
loaded and detach UBI on which the UBIFS is located, otherwise message
similar to the following is printed just before booting kernel:

Removing MTD device #7 (rootfs) with use count 1
Error when deleting partition "rootfs" (-16)

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Siew Chin Lim <elly.siew.chin.lim@intel.com>
Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Cc: Tien Fong Chee <tien.fong.chee@intel.com>
Reviewed-by: Tien Fong Chee  <tien.fong.chee@intel.com>
2022-06-16 16:11:06 +08:00
Peng Fan
ca3369df71 configs: drop CONFIG_SPL_ABORT_ON_RAW_IMAGE
CONFIG_SPL_RAW_IMAGE_SUPPORT default y has been used to replace
CONFIG_SPL_ABORT_ON_RAW_IMAGE for quite some time, so drop
CONFIG_SPL_ABORT_ON_RAW_IMAGE.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-06-14 21:33:13 +02:00
Peng Fan
0a16da8079 imx: kontron-sl-mx8mm: enable DM_SERIAL
Enable CONFIG_DM_SERIAL. uart and its pinmux was already
marked with u-boot,dm-spl.
Move preloader_console_init after spl_init to make sure driver
model work.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2022-06-14 21:33:13 +02:00
Peng Fan
bb9e14cfd0 imx: imx8mn_var_som: enable DM_SERIAL
Enable CONFIG_DM_SERIAL. uart and its pinmux was already
marked with u-boot,dm-spl.
Move preloader_console_init after spl_init to make sure driver
model work.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-06-14 21:33:13 +02:00
Peng Fan
64d118b27f imx: imx8m[m/p]_phycore: Enable DM_SERIAL
Enable CONFIG_DM_SERIAL. uart and its pinmux was already
marked with u-boot,dm-spl.
Move preloader_console_init after spl_early_init to make sure driver
model work.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Teresa Remmet <t.remmet@phytec.de>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-06-14 21:33:13 +02:00
Peng Fan
4ebb9a5898 imx: imx8mm_icore: Enable SPL_DM_SERIAL
Enable CONFIG_SPL_DM_SERIAL. uart2 and its pinmux was already
marked with u-boot,dm-spl.
Move preloader_console_init after spl_early_init to make sure driver
model work.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-06-14 21:33:13 +02:00
Peng Fan
37750505b9 imx: imx8mm-cl-iot-gate: Enable DM_SERIAL
Enable CONFIG_DM_SERIAL. uart3 and its pinmux was already
marked with u-boot,dm-spl.
Move preloader_console_init after spl_early_init to make sure driver
model work.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-06-14 21:33:13 +02:00
Peng Fan
d35130fef8 imx: imx8m[m/n]_beacon: Enable SPL_DM_SERIAL
Enable CONFIG_SPL_DM_SERIAL. uart2 and its pinmux was already
marked with u-boot,dm-spl.
Move preloader_console_init after spl_init to make sure driver
model work.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx8mm_beacon
Reviewed-by: Fabio Estevam <festevam@denx.de>
Tested-by: Adam Ford <aford173@gmail.com> #imx8mn_beacon
2022-06-14 21:33:13 +02:00
Peng Fan
0e1b54247d imx: drop CONFIG_MXC_UART_BASE
Since these boards has CONFIG_DM_SERIAL and/or CONFIG_SPL_DM_SERIAL,
the legacy macro no need to be defined.

Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Soeren Moch <smoch@web.de>
Acked-by: Tim Harvey <tharvey@gateworks.com>
2022-06-14 21:33:13 +02:00
Philippe Schenker
a3f2dcf8f4 verdin-imx8mm, verdin-imx8mp: Fix default systemd console output
systemd prints its messages on the last console= statement that it finds
in the kernel arguments. The current ordering sends the systemd messages
to tty1, by default this is the display.

Ensure that systemd sends its messages to the default UART, reorder the
console= statements accordingly.

Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-06-14 21:25:26 +02:00
Vignesh Raghavendra
2d257d9279 configs: Add configs for AM62x SK
Add am62x_evm_r5_defconfig for R5 SPL and am62x_evm_a53_defconfig for
A53 SPL and U-Boot support.

To keep the changes to minimum. Only UART And SD boot related configs
are included. This should serve as good starting point for new board
bringup with AM62x.

Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
[trini: Migrate a number of CONFIG symbols, have re-tested]
Tested-by: Georgi Vlaev <g-vlaev@ti.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-10 13:37:33 -04:00
William Zhang
f8209d3051 arm: bcmbca: introduce the bcmbca architecture and 47622 SOC
This is the initial support for Broadcom's ARM-based 47622 SOC.

In this change, our first SOC is an armv7 platform called 47622. The
initial support includes a bare-bone implementation and dts with ARM
PL011 uart.

The SOC-specific code resides in arch/arm/mach-bcmbca/<soc> and board
related code is in board/broadcom/bcmba.

The u-boot image can be loaded from flash or network to the entry
point address in the memory and boot from there.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Kursad Oney <kursad.oney@broadcom.com>
Signed-off-by: Anand Gore <anand.gore@broadcom.com>
Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-06-10 13:37:32 -04:00
Vaishnav Achath
d45ccab483 configs: j721e_evm.h: define CONFIG_SYS_FLASH_BASE
Define CONFIG_SYS_FLASH_BASE to indicate start address of
Flash memory

Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
2022-06-10 09:03:22 -04:00
Michael Trimarchi
98303ce73d include/configs: Remove rootwait=1 to all the affected boards
rootwait=1 is not a valid kernel boot parameters. According
to the documenation is only rootwait

rootwait	[KNL]	Wait (indefinitely) for root device to show up.
			Useful for devices that are detected asynchronously
			(e.g. USB and MMC devices).

Fix:
Unknown kernel command line parameters "rootwait=1", will be passed to user space.

Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2022-06-06 18:01:21 -04:00
Chris Packham
3ff2aa6d04 arm: mvebu: Remove CONFIG_SPL_BOOT_DEVICE
CONFIG_SPL_BOOT_DEVICE was made obsolete by
CONFIG_MVEBU_SPL_BOOT_DEVICE_{SPI,MMC,SATA,UART}.
CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI is the default so existing users of
CONFIG_SPL_BOOT_DEVICE can simply have the option removed.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-06-06 12:09:29 -04:00
Chris Packham
b19512f1cf Convert CONFIG_FIXED_SDHCI_ALIGNED_BUFFER to Kconfig
CONFIG_FIXED_SDHCI_ALIGNED_BUFFER is needed on some Marvell SoCs when
booting from MMC. All existing usages of this have the same value so
make this the default and have the Kconfig option depend on SPL &&
MVEBU_SPL_BOOT_DEVICE_MMC.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-06-06 12:09:29 -04:00
Tom Rini
103d1aecb0 Convert CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR
   CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:29 -04:00
Tom Rini
5fc1d58176 Convert CONFIG_SYS_NAND_SPL_KERNEL_OFFS to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_NAND_SPL_KERNEL_OFFS

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:29 -04:00
Tom Rini
dc22afb975 spl: Remove CONFIG_SPL_START_S_PATH and rework the logic behind it
In some cases, when we don't use CONFIG_SPL_FRAMEWORK nor are we on
PowerPC using their specific SPL/TPL framework, we need to specify the
start.S file to use for these typically very constrained systems.  Do
this within the Makefile logic, rather than introducing a string-based
CONFIG option, as this would get slightly complex to do in Kconfig for a
very limited number of users.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:29 -04:00
Tom Rini
c8836dbb01 Drop CONFIG_SPL_SIZE
We do not reference CONFIG_SPL_SIZE in the code, remove it.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:29 -04:00
Tom Rini
14b4817513 ax25-ae350: Move CONFIG_SYS_FDT_BASE to Kconfig
The address where the device tree will be passed in to U-Boot at is now
moved to the Kconfig file.  If this is user configurable, it needs to be
exposed rather than hidden, and should probably be renamed as well.

Reviewed-by: Rick Chen <rick@andestech.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:29 -04:00
Tom Rini
b4b9a00ed5 Convert CONFIG_SYS_SPL_ARGS_ADDR to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_SPL_ARGS_ADDR

In doing so, we also consistently use this variable for SPL_OS_BOOT and
not CONFIG_SYS_FDT_BASE in some cases.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:29 -04:00
Tom Rini
a62b7f0c24 Convert CONFIG_SPL_TARGET to Kconfig
This converts the following to Kconfig:
   CONFIG_SPL_TARGET

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:29 -04:00
Tom Rini
cad7f4bab8 Remove CONFIG_SPL_STACK_SIZE
This is not used anywhere, drop it.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:29 -04:00
Tom Rini
0bf940c235 Drop CONFIG_SPL_SPI_FLASH_MINIMAL
There are no users of CONFIG_SPL_SPI_FLASH_MINIMAL only platforms
defining it, drop it.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:29 -04:00
Tom Rini
7f2c91e5d8 Convert CONFIG_SPL_GD_ADDR to Kconfig
This converts the following to Kconfig:
   CONFIG_SPL_GD_ADDR

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:29 -04:00
Tom Rini
cfb5dd3585 etamin: Remove CONFIG_SPL_CMT defines
These are presumably private to non-upstream code, remove.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:29 -04:00
Tom Rini
c4b8bc48b6 Remove CONFIG_SYS_SPL_LEN largely
This is mostly unused.  In the case where it is currently used, it means
the same as CONFIG_SPL_PAD_TO, which is already set for the platform.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:28 -04:00
Tom Rini
10f6e4dc3a Convert CONFIG_SYS_SPL_MALLOC_SIZE et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_SPL_MALLOC_SIZE
   CONFIG_SYS_SPL_MALLOC_START

We introduce a default value here as well, and CONFIG_SYS_SPL_MALLOC to
control if we have a malloc pool or not.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:28 -04:00
Tom Rini
6600b355c7 Convert CONFIG_SPL_BSS_START_ADDR to Kconfig
This converts the following to Kconfig:
   CONFIG_SPL_BSS_START_ADDR

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:28 -04:00
Tom Rini
55cf860ba7 Convert CONFIG_SPL_RELOC_TEXT_BASE et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SPL_RELOC_TEXT_BASE
   CONFIG_SPL_RELOC_STACK
   CONFIG_SPL_RELOC_MALLOC_ADDR
   CONFIG_SPL_RELOC_MALLOC_SIZE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:28 -04:00
Tom Rini
90e1fd0910 Convert CONFIG_TPL_NAND_INIT to Kconfig
This converts the following to Kconfig:
   CONFIG_TPL_NAND_INIT

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:28 -04:00
Tom Rini
8b83b53a8d imx7: Update CONFIG_SPL_STACK defaults in Kconfig
Update the Kconfig entry to have the correct defaults for i.MX7
platforms, and move the existing large comment from imx7_spl.h to
doc/imx/common/imx7.txt so that it's not lost.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:28 -04:00
Tom Rini
23780398b5 imx6: Update CONFIG_SPL_STACK defaults in Kconfig
Update the Kconfig entry to have the correct defaults for i.MX6
platforms, and move the existing large comment from imx6_spl.h to
doc/imx/common/imx6.txt so that it's not lost.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:28 -04:00
Tom Rini
f113d7d303 Convert CONFIG_SPL_STACK to Kconfig
This converts the following to Kconfig:
   CONFIG_SPL_STACK

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:27 -04:00
Tom Rini
eaf6ea6a1d Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h
- Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR
- Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack
  pointer directly, otherwise we use the common calculation.
- On some platforms that were using the standard calculation but did not
  set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them.
- On a small number of platforms that were not subtracting
  GENERATED_GBL_DATA_SIZE do so now via the standard calculation.
- CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most
  board config header files.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:19 -04:00
Tom Rini
be131adb8d stih410-b2260: Switch to using GENERATED_GBL_DATA_SIZE
We have GENERATED_GBL_DATA_SIZE to tell us how large the generated
global data is, so do not use a hard-coded value of 1024 for it.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:13 -04:00
Tom Rini
4c97c8cd42 powerpc: Switch to using CONFIG_SYS_INIT_SP_OFFSET from CONFIG_SYS_GBL_DATA_OFFSET
In the places where PowerPC references CONFIG_SYS_GBL_DATA_OFFSET it
does so as (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET).  And
it defines CONFIG_SYS_GBL_DATA_OFFSET in the same manner that other
architectures define CONFIG_SYS_INIT_SP_OFFSET. Other architectures
define CONFIG_SYS_INIT_SP_ADDR as (CONFIG_SYS_INIT_RAM_ADDR +
CONFIG_SYS_INIT_SP_OFFSET) typically.  Rename things within PowerPC for
consistency with other architectures.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:12 -04:00
Tom Rini
06ddcfc95a m68k: Stop using CONFIG_SYS_GBL_DATA_OFFSET
This value is only referenced by PowerPC code in a way other than
directly as CONFIG_SYS_INIT_SP_ADDR.  Switch to CONFIG_SYS_INIT_SP_ADDR
directly.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:12 -04:00
Tom Rini
68eed5bb1c arm: Stop using CONFIG_SYS_GBL_DATA_OFFSET
This value is only referenced by PowerPC code in a way other than
directly as CONFIG_SYS_INIT_SP_ADDR.  Switch to CONFIG_SYS_INIT_SP_ADDR
directly.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:12 -04:00
Tom Rini
85758d8aa1 arm: Use CONFIG_SPL_STACK or CONFIG_SYS_INIT_SP_ADDR directly.
In some cases, we define CONFIG_SYS_INIT_SP_ADDR differently for SPL or
full U-Boot.  This case should be making use of CONFIG_SPL_STACK, as
that's what that variable is for.  In a few other cases we define
CONFIG_SPL_STACK directly to CONFIG_SYS_INIT_SP_ADDR, but do not need to
as the code handles this correctly, normally.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:12 -04:00
Tom Rini
3b2979eefa mvebu: Use CONFIG_SPL_STACK + 4 directly for bootparam location
The definition of CONFIG_SPL_BOOTROM_SAVE is always a fixed
CONFIG_SPL_STACK + 4, while CONFIG_SPL_STACK is not constant.  This
change will make it clear where the location is still, once
CONFIG_SPL_STACK moves to Kconfig.

Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:12 -04:00
Tom Rini
90f0819a31 Convert CONFIG_SPL_COMMON_INIT_DDR to Kconfig
This converts the following to Kconfig:
   CONFIG_SPL_COMMON_INIT_DDR

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:12 -04:00
Tom Rini
6074a536d5 ppc / layerscape: Clean up CONFIG_SYS_CCSR_DO_NOT_RELOCATE usage
A number of PowerPC platforms define this, for SPL.  To move this to
Kconfig, it needs to be CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE, so use
CONFIG_IS_ENABLED() to check for usage.  A number of layerscape
platforms bring this logic from PowerPC, but only need a small part of
it, for the fman driver.  Remove their unused portion at least.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:12 -04:00
Tom Rini
66bda092cf Convert CONFIG_SPL_SYS_MALLOC_SIMPLE to Kconfig
This converts the following to Kconfig:
   CONFIG_SPL_SYS_MALLOC_SIMPLE

The problem here is that a few platforms have been doing:
#ifdef CONFIG_SPL_BUILD
#define CONFIG_SYS_MALLOC_SIMPLE
#endif

instead of defining CONFIG_SPL_SYS_MALLOC_SIMPLE directly.  Correct this
and update the documentation in a few places to match usage.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:12 -04:00
Tom Rini
9b5f9aeb3b Convert CONFIG_SPL_BSS_MAX_SIZE et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SPL_BSS_MAX_SIZE
   CONFIG_SPL_MAX_FOOTPRINT

Note that the da850evm platforms were violating the "only use one" rule
here, and so now hard-code their BSS limit.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:10 -04:00
Tom Rini
ca8a329a1b Convert CONFIG_SPL_PAD_TO et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SPL_PAD_TO
   CONFIG_SPL_MAX_SIZE
   CONFIG_TPL_PAD_TO
   CONFIG_TPL_MAX_SIZE

Note that we need to make TPL_MAX_SIZE be hex, and so move and convert the
existing places.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:06 -04:00
Tom Rini
4a11e34bc9 Convert CONFIG_SPL_FS_LOAD_PAYLOAD_NAME et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SPL_FS_LOAD_ARGS_NAME
   CONFIG_SPL_FS_LOAD_KERNEL_NAME
   CONFIG_SPL_FS_LOAD_PAYLOAD_NAME

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:00 -04:00
Tom Rini
bab1b35c61 Convert CONFIG_SPL_NAND_RAW_ONLY et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SPL_NAND_RAW_ONLY
   CONFIG_SPL_NAND_SOFTECC

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:00 -04:00
Tom Rini
b35316fb67 Convert CONFIG_SPL_INIT_MINIMAL et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SPL_INIT_MINIMAL
   CONFIG_SPL_FLUSH_IMAGE
   CONFIG_SPL_SKIP_RELOCATE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:00 -04:00
Tom Rini
e2475141bd Convert CONFIG_SYS_CFI_FLASH_STATUS_POLL to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_CFI_FLASH_STATUS_POLL

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:00 -04:00
Tom Rini
2f57139c21 Convert CONFIG_SYS_FLASH_CFI_WIDTH to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_FLASH_CFI_WIDTH

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:00 -04:00
Tom Rini
d498c67054 spl: Remove CONFIG_SPL_SATA_BOOT_DEVICE
This is only referenced in non-SPL_DM cases, of which there are
currently none.  Remove this option and slightly re-organize the code is
there is now never an if/else at the start of spl_sata_load_image()

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:00 -04:00
Tom Rini
aa473e70ac fsl-layerscape: Remove CONFIG_SPL_PBL_PAD
This option is not referenced in code, remove it.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:00 -04:00
Tom Rini
2179dc085d P1010RDB: Remove CONFIG_SPL_NAND_MINIMAL
This symbol is not used anywhere, remove it.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:00 -04:00
Tom Rini
a581eba01d spl: Remove CONFIG_SPL_BOARD_LOAD_IMAGE
This symbol has been unused in code for some time now, remove
the final references.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:00 -04:00
Tom Rini
12f613cf0e arm: omap2plus: Move CONFIG_SYS_PTV out of CONFIG namespace
This is always defined to 2, and referenced in two places.  Move the
define to <asm/omap_common.h> and make sure the code that uses this
includes that file.  Make <asm/arch-omap*/clock.h> not include that
file, as we don't need to be doing so.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:00 -04:00
Tom Rini
167f699ba1 Convert CONFIG_SYS_BOOTPARAMS_LEN to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_BOOTPARAMS_LEN

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:00 -04:00
Tom Rini
b7fbdc55c7 Convert CONFIG_HUSH_INIT_VAR to Kconfig
This converts the following to Kconfig:
   CONFIG_HUSH_INIT_VAR

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:00 -04:00
Tom Rini
6889412ad5 Convert CONFIG_SYS_BARGSIZE to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_BARGSIZE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:00 -04:00
Tom Rini
d31466b382 Convert CONFIG_SYS_CBSIZE to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_CBSIZE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:00 -04:00
Tom Rini
d0ee7f295d Convert CONFIG_SYS_PBSIZE to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_PBSIZE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:00 -04:00
Tom Rini
cf493582f8 Convert CONFIG_SYS_MAXARGS to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_MAXARGS

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:08:58 -04:00
Tom Rini
4fe629d2e8 Merge https://source.denx.de/u-boot/custodians/u-boot-riscv 2022-05-27 08:50:42 -04:00
Bin Meng
c544b281cd riscv: qemu: Set kernel_comp_addr_r for compressed kernel
Set kernel_comp_addr_r and kernel_comp_size for compressed kernel.
Adjust existing addresses for ramdisk, so that kernel_comp_addr_r
comes before the ramdisk image, since the decompressed kernel size
is known to us. This way we can allow big ramdisk image to be loaded.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2022-05-26 18:42:34 +08:00
Bin Meng
ce78c4cd6e riscv: sifive: unleashed: Set kernel_comp_addr_r for compressed kernel
Set kernel_comp_addr_r and kernel_comp_size for compressed kernel.
Adjust existing addresses for ramdisk, so that kernel_comp_addr_r
comes before the ramdisk image, since the decompressed kernel size
is known to us. This way we can allow big ramdisk image to be loaded.

Update unleashed.rst to remove the manual environment configuration
for compressed kernel boot.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2022-05-26 18:42:34 +08:00
Bin Meng
b84d24c3c5 riscv: sifive: unmatched: Adjust for big ramdisk image
Move kernel_comp_addr_r to an address that comes before the ramdisk
image, since the decompressed kernel size is known to us. This way
we can allow big ramdisk image to be loaded.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2022-05-26 18:42:33 +08:00
Tom Rini
661f540075 Xilinx changes for v2022.07-rc4
zynqmp:
 - Fix DP PLL configuration for zcu102/zcu106 and SOM
 - Fix split mode for starting R5s
 - DT fixes
 - Remove firmware node for mini configurations
 - Wire TEE for multi DTB fit image
 
 xilinx:
 - Handle board_get_usable_ram_top(0) properly
 
 phy:
 - Extend psgtr timeout
 
 mmc:
 - Fix mini configuration which misses zynqmp_pm_is_function_supported()
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCYo4bYwAKCRDKSWXLKUoM
 IYmTAJ9t4GDXggJ7ErB3Kk7/qSrywjEGAgCgnKQVgQvjo1B6o5aiwbk1wR86zkQ=
 =W7X8
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2022.07-rc4' of https://source.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx changes for v2022.07-rc4

zynqmp:
- Fix DP PLL configuration for zcu102/zcu106 and SOM
- Fix split mode for starting R5s
- DT fixes
- Remove firmware node for mini configurations
- Wire TEE for multi DTB fit image

xilinx:
- Handle board_get_usable_ram_top(0) properly

phy:
- Extend psgtr timeout

mmc:
- Fix mini configuration which misses zynqmp_pm_is_function_supported()
2022-05-25 09:50:08 -04:00
Humberto Naves
1b05136a6c arm: socfpga: Add the terasic de10-standard board
Use the de10-nano files as templates for the de10-standard board.
The files in qts directory are generated by quartus from the GHRD
design.

Signed-off-by: Humberto Naves <hsnaves@gmail.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2022-05-23 21:28:07 +02:00
Marek Vasut
4d573d5c98 ARM: dts: imx: Add support for DH electronics i.MX8M Plus DHCOM and PDK2
Add support for DH electronics i.MX8M Plus DHCOM SoM on PDK2 carrier board.
Currently supported are serial console, EQoS and FEC ethernets, eMMC, SD,
SPI NOR and USB 3.0 host.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2022-05-23 11:37:58 +02:00
Philip Oberfichtner
6ecd1d66a9 ARM: imx6: Remove CONFIG_FEC_MXC_PHYADDR from DH header
Use phy address from device tree instead of CONFIG_FEC_MXC_PHYADDR from
board header. This is required, because the DH picoITX and DRC02 boards
require different settings than PDK2. The corresponding 'phy-handle'
device tree properties are already there.

I tested this change on picoITX and DRC02, but on PDK2 it is untested.

Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Philip Oberfichtner <pro@denx.de>
2022-05-20 12:36:48 +02:00
Peng Fan
fbc6b14143 imx: imx8mp_rsb3720a1: convert to DM_SERIAL
Enable CONFIG_DM_SERIAL. uart2 and its pinmux was already
marked with u-boot,dm-spl.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-05-20 12:36:48 +02:00
Philip Oberfichtner
55d1537c5b bosch: Add initial board support for ACC
The Bosch ACC (Air Center Control) Board is based on the i.MX6D.

The device tree is copied from Linux, see [1]. The only difference
compared to the Linux DT is the removal of usbphynop properties. They are
defined in the Linux version of imx6qdl.dtsi, but not in the u-boot
version.

[1] Commit 6192cf8ac082 from
    git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git

Signed-off-by: Philip Oberfichtner <pro@denx.de>
2022-05-20 12:36:48 +02:00
Peng Fan
6ea118ef9a imx: imx8mm_edm_sbc: Enable SPL_DM_SERIAL
Enable CONFIG_SPL_DM_SERIAL. uart and its pinmux was already
marked with u-boot,dm-spl.
Move preloader_console_init after spl_early_init to make sure driver
model work.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-05-20 09:30:28 +02:00
Peng Fan
2232d5f5b7 imx: imx8mm_mx8menlo: Enable DM_SERIAL
Enable CONFIG_DM_SERIAL. uart2 and its pinmux was already
marked with u-boot,dm-spl.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-05-20 09:30:28 +02:00
Tim Harvey
8e3cc42a3f configs: remove FEC_QUIRK_ENET_MAC from imx8m configs
FEC_QUIRK_ENET_MAC is defined in the imx-regs.h include file and thus
does not need to be defined in the various board config includes.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-05-20 09:30:28 +02:00
Tim Harvey
110998f3c6 configs: imx8mp_venice: add FEC_QUIRK_ENET_MAC
The IMX8MP SoC FEC needs to have the FEC_QUIRK_ENET_MAC defined.

Fixes: commit 2395625209 ("board: gateworks: venice: add imx8mp-venice-gw740x support")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-05-20 09:30:28 +02:00
Tim Harvey
400eebf10d configs: imx8m{m, n}_venice: remove unneeded CONFIG_FEC_MXC_PHYADDR
The IMX8M based Venice boards all have device-tree fec nodes that
use proper dt with a phy-handle pointing to a phy with reg assigned
to the proper phy address.

There is no need to keep using the CONFIG_FEC_MXC_PHYADDR hack when
a proper dt is used - remove it.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-05-20 09:30:28 +02:00
Marek Vasut
be23774ed1 ARM: imx: imx27: Introduce and use UART_BASE_ADDR(n)
Introduce helper macro UART_BASE_ADDR(n), which returns Nth UART base
address. Convert all board configurations to this new macro. This is the
first step toward switching CONFIG_MXC_UART_BASE to Kconfig. This is a
clean up, no functional change.

The new macro contains compile-time test to verify N is in suitable
range. The test works such that it multiplies constant N by constant
double-negation of size of a non-empty structure, i.e. it multiplies
constant N by constant 1 in each successful compilation case.

The non-empty structure may contain C11 _Static_assert(), make use of
this and place the kernel variant of static assert in there, so that
it performs the compile-time check for N in the correct range. Note
that it is not possible to directly use static_assert in compound
statements, hence this convoluted construct.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2022-05-20 09:03:01 +02:00
Marek Vasut
52b6b480db ARM: imx: imx8m: Introduce and use UART_BASE_ADDR(n)
Introduce helper macro UART_BASE_ADDR(n), which returns Nth UART base
address. Convert all board configurations to this new macro. This is the
first step toward switching CONFIG_MXC_UART_BASE to Kconfig. This is a
clean up, no functional change.

The new macro contains compile-time test to verify N is in suitable
range. The test works such that it multiplies constant N by constant
double-negation of size of a non-empty structure, i.e. it multiplies
constant N by constant 1 in each successful compilation case.

The non-empty structure may contain C11 _Static_assert(), make use of
this and place the kernel variant of static assert in there, so that
it performs the compile-time check for N in the correct range. Note
that it is not possible to directly use static_assert in compound
statements, hence this convoluted construct.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2022-05-20 09:03:01 +02:00
Michal Simek
10c29fa1cc xilinx: zynqmp: Do not guard SPL_FS_LOAD_PAYLOAD_NAME by SDHCI driver
CONFIG_SPL_FS_LOAD_PAYLOAD_NAME is used by set_dfu_alt_info() for string
generation. It doesn't depend on SDHCI because the same file can be stored
to other non volatile memories like qspi.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/97434e122c6f8f042330b60d3e8de4c31f3e3f93.1652192580.git.michal.simek@amd.com
Link: https://lore.kernel.org/r/718de136c68c9a76fc7b4e536a727f401b05bfb9.1652702625.git.michal.simek@amd.com
2022-05-18 13:17:18 +02:00
Chris Packham
54a54a6313 Convert CONFIG_MTD_CONCAT to Kconfig
This converts the following to Kconfig:
  CONFIG_MTD_CONCAT

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-05-11 09:22:24 -04:00
Tom Rini
21e25992c8 Add new STM32 MCU boards and Documentation
STM32 programmer improvements
 video: support several LTDC HW versions and fix data enable polarity
 board: fix stboard error message, consider USB cable connected when boot device is USB
 configs: stm32mp1: set console variable for extlinux.conf
 configs: stm32mp1: add support for baudrate higher than 115200 for ST-Link
 ARM: stm32mp: Fix Silicon version handling and ft_system_setup()
 phy: stm32-usbphyc: Add DT phy tuning support
 arm: dts: stm32mp15: alignment with v5.18
 ram: Conditionally enable ASR
 mach-stm32mp: psci: retain MCUDIVR, PLL3CR, PLL4CR, MSSCKSELR across suspend
 configs: Use TFTP_TSIZE on DHSOM and STMicroelectronics boards
 ARM: stm32: Use default CONFIG_TFTP_BLOCKSIZE on DHSOM
 pinctrl: stm32: rework GPIO holes management
 -----BEGIN PGP SIGNATURE-----
 
 iQJQBAABCgA6FiEEXyrViUccKBz9c35Jysd4L3sz/6YFAmJ6U4QcHHBhdHJpY2Uu
 Y2hvdGFyZEBmb3NzLnN0LmNvbQAKCRDKx3gvezP/pg4SEACFSVRcCa/7r2QXObqk
 mORtlp6OrZLfCQGMugv9Oj0W+L4nanJEZEJknhasoHgm5CyTuCGEm7qxgWWBKA9j
 yeCfcpToXrY4cIMgsPR4tpZ9jn4fLsHFBEvCVMEoOp/K2ZI27lfJ0/OeRlgKdg11
 dTmM+J96vw7ltLHeN+yRWY1XgaGsBreqNJSO2mCGrAbbTJXSTrNZxP4wonTvKkFI
 GyTIgRaQA9ggk7/IhalusEEGIF0aaaX/z7uBXqEGkCyOTacLG5rxYNGCoaPdv1Bl
 fT7spZy1bAx3ABq/yJeF38Wi5jCXf55Z3cwYK0+tpJVUlAncYpJJBiyTERtR24OK
 NeDTWkw4e071xPDfmUFB96eINDQ8KXBRRcK2n2b6nW43loYtqgafrx4prL8W2T/u
 mB1WquNwjqdNN43iKAcyArrooOG18sJzRE3uAM6W4fjPx8DAHtYdaO3du3Mb5Kzz
 YaqgVO88NDsYaQRJCnmdQ7KDFToMy5A6btj2LhnYQ/3CMhktkg2RHC0aERGgNJLs
 ifVj3kvc+l8UwomvNOMjNket+AH7hbp64lbAfjAwzcgOGROKNyOslsr33qibg4lQ
 SQKl15wFDHLAcP2tj9QoUFO+97FqDXWBIzoEhDDBqfpVNRx25R7NePUkkA+0dHTS
 VedeNG6p2yFeW2UTAD4nYP9xWA==
 =s7xn
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20220510' of https://source.denx.de/u-boot/custodians/u-boot-stm

Add new STM32 MCU boards and Documentation
STM32 programmer improvements
video: support several LTDC HW versions and fix data enable polarity
board: fix stboard error message, consider USB cable connected when boot device is USB
configs: stm32mp1: set console variable for extlinux.conf
configs: stm32mp1: add support for baudrate higher than 115200 for ST-Link
ARM: stm32mp: Fix Silicon version handling and ft_system_setup()
phy: stm32-usbphyc: Add DT phy tuning support
arm: dts: stm32mp15: alignment with v5.18
ram: Conditionally enable ASR
mach-stm32mp: psci: retain MCUDIVR, PLL3CR, PLL4CR, MSSCKSELR across suspend
configs: Use TFTP_TSIZE on DHSOM and STMicroelectronics boards
ARM: stm32: Use default CONFIG_TFTP_BLOCKSIZE on DHSOM
pinctrl: stm32: rework GPIO holes management
2022-05-10 15:28:02 -04:00
Patrice Chotard
7aa4b4523f configs: stm32f746-disco: use CONFIG_DEFAULT_DEVICE_TREE as fdtfile
As stm32f46-disco, stm32f769-disco and stm32746g-eval are very similar
except their respective device tree file. These 3 boards uses the same
TARGET_STM32F746_DISCO flag (so same include/configs/stm32f746-disco.h
and same board file board/st/stm32f746-disco/stm32f746-disco.c)

To be able to compile these 3 boards, replace the hard-coded device-tree
name in include/configs/stm32f746-disco.h by CONFIG_DEFAULT_DEVICE_TREE
which is set in each board defconfig file with the correct value.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-05-10 13:56:12 +02:00
Patrice Chotard
480995b76b configs: stm32f746-disco: Concatenate spl and u-boot binaries
This allows to concatenate spl and u-boot binaries together.
Previously, both binaries has to be flashed separately at the correct
offset (spl at offset 0 and u-boot at offset 0x8000).
With this patch, only one binary is generated (u-boot-with-spl.bin)
and has to be copied in flash at offset 0 using openocd for example
or simply copied in exported mass storage.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-05-10 13:56:11 +02:00
Patrick Delaunay
5367b67be4 configs: stm32mp1: Add support for baudrates higher than 115200 for st-link
On STMicroelectronics boards, the UART can reliably go up to
2000000 bauds when connected to the on-board ST-LINK-V2 for STM32MP15

Unfortunately U-Boot will fall back to 115200 unless higher rates are
declared via CONFIG_SYS_BAUDRATE_TABLE.

This patch add the support of higher baudrates on STMicroelectronics
boards with ST-LINK.

Cc: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-05-10 10:56:39 +02:00
Patrick Delaunay
806c4dd315 configs: stm32mp1: set the console variable for extlinux.conf
Set the environment variable "console", used in extlinux.conf file when it
is generated by YOCTO distribution with:

UBOOT_EXTLINUX_CONSOLE ??= "console=${console},${baudrate}"

With these 2 variables, U-Boot give dynamically the used console and
baudrate in the Linux kernel bootargs.

For the STMicroelectronics boards, the used console is ttySTM0.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-05-10 10:56:39 +02:00
Pali Rohár
c7484ce091 Nokia RX-51: Convert to CONFIG_DM_SERIAL
For CONFIG_DM_SERIAL it is required to increase CONFIG_SYS_MALLOC_F_LEN as
default value is not enough for memory hungry CONFIG_DM_SERIAL code.

Signed-off-by: Pali Rohár <pali@kernel.org>
Tested-by: Merlijn Wajer <merlijn@wizzup.org>
2022-05-09 13:40:24 -04:00
Aswath Govindraju
56717a1388 include: configs: am**x/j721e/j721s2_evm.h: Move the stack pointer init address in arm64
Currently, in case of arm64 bootloader and U-Boot the stack pointer is
initialized at an offset of NON_SECURE_MSRAM_SIZE from arm64 SPL's text
base address. After jumping to arm64, execution is done out of DDR.
Therefore, having an offset corresponding to the size of MSRAM does not
have any significance.

Instead, initialize the stack pointer after an offset of 4MB from the SPL
text base address. This helps in allocating larger memory for stack.

  ┌────────────────────┐0x80080000
  │                    │
  │   arm64 SPL        │
  ├────────────────────┤
  │        ▲           │
  │        │           │
  │      STACK         │
  ├────────────────────┤0x80480000
  │ Memory for Load    │
  │ Buffer Allocation  │
  ├────────────────────┤0x80800000
  │                    │
  │    U-Boot Image    │
  │                    │
  └────────────────────┘

Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
2022-05-05 09:29:58 -04:00
Jim Liu
84335544ea arm: nuvoton: Add support for Nuvoton NPCM750 BMC
Add basic support for the Nuvoton NPCM750 EVB (Poleg).

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
2022-05-05 09:28:47 -04:00
Stefan Roese
78c01757f0 mips: octeon: ebb7304: Enable ethernet support
This patch enables the Kconfig symbols needed for full ethernet support
on the EBB7304. Also the PHY autonegotiation timeout is increased, as
the default 5 seconds are sometime a bit short. With this, ethernet can
be used on this board. Here an example of a tftp load:

=> tftp ffffffff81000000 big
ethernet-mac-nexus@11800e0000000 Waiting for PHY auto negotiation to complete....... done
Using ethernet-mac-nexus@11800e0000000 device
TFTP from server 192.168.1.5; our IP address is 192.168.1.243
Filename 'big'.
Load address: 0xffffffff81000000
Loading: ##################################################  10 MiB
         13.2 MiB/s
done
Bytes transferred = 10485760 (a00000 hex)

Signed-off-by: Stefan Roese <sr@denx.de>
2022-05-04 07:05:51 +02:00
Stefan Roese
11424633a1 mips: octeon: octeon_common.h: Move init SP because of increased image size
This patch moves CONFIG_SYS_INIT_SP_OFFSET to a higher address so that
it does not interfere with larger U-Boot images. This was noticed, while
adding network support to the EBB7304 board.

Signed-off-by: Stefan Roese <sr@denx.de>
2022-05-04 03:38:21 +02:00
Tony Dinh
dbd2a382c1 arm: kirkwood: nsa310s: Use Marvell uclass mvgbe and PHY driver for DM Ethernet
The Zyxel NSA310s board has the network chip Marvell Alaska 88E1318S.
Use uclass mvgbe and the compatible driver M88E1310 driver to bring
up Ethernet.

- Use uclass mvgbe to bring up the network. And remove ad-hoc code.
- Remove CONFIG_RESET_PHY_R.
- Enable CONFIG_PHY_MARVELL to properly configure the network.
- Add phy mode RGMII to kirkwood-nsa310s.dts
- Miscellaneous changes: Move constants to .c file and remove header file
board/zyxel/nsa310s/nsa310s.h, add support for large USB and SATA HDDs,
use BIT macro, add/cleanup comments, and cosmetic changes.

Note that this patch is depended on the following patch:
https://patchwork.ozlabs.org/project/uboot/patch/20220412201820.10291-1-mibodhi@gmail.com/

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
2022-05-02 07:47:26 +02:00
Pali Rohár
b8b91a0f08 arm: mvebu: turris_mox: Add NVMe and SCSI to boot targets
U-Boot for Turris Mox has already enabled NVMe and SCSI support. So add
NVMe and SCSI to boot targets.

Signed-off-by: Pali Rohár <pali@kernel.org>
2022-05-02 07:47:26 +02:00
Pali Rohár
0ddc1e5aa3 arm: mvebu: turris_omnia: Add NVMe to boot targets
U-Boot for Turris Omnia has already enabled NVMe support. So add NVMe to
boot targets.

Signed-off-by: Pali Rohár <pali@kernel.org>
2022-05-02 07:47:26 +02:00
Pali Rohár
9efc5b7a4b arm: mvebu: turris_omnia: Always enable MMC, SCSI and USB boot targets
U-Boot for Turris Omnia is always compiled with MMC, SCSI and USB support,
so always enable macros for booting from these devices.

Signed-off-by: Pali Rohár <pali@kernel.org>
2022-05-02 07:47:26 +02:00
Pali Rohár
31f88018d9 arm: mvebu: turris_omnia: Define CONFIG_ETHPRIME instead of ethact= ENV
CONFIG_ETHPRIME defines primary ethernet device and env variable $ethact
stores currently active ethernet device.

So there is no point to set ethact= in default environment. Instead set
CONFIG_ETHPRIME properly.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
2022-05-02 07:47:26 +02:00
Tom Rini
8b2b125e95 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xx
fsl-qoriq: Fixes and updates on fsl-layerscape
mpc85xx: fixes and code cleanup
2022-04-27 09:19:41 -04:00
Pali Rohár
c7d0295c25 board: freescale: p1_p2_rdb_pc: Define SW macros for lower and upper NOR banks
Replace hardcoded i2c hex values for NOR banks by named SW macros in
map_lowernorbank/map_uppernorbank env commands.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-04-26 17:18:39 +05:30
Pali Rohár
6496a89a57 board: freescale: p1_p2_rdb_pc: Use named macros for i2c bus num and address
Replace hardcoded boot i2c bus num and address by existing macros when
generating env for CONFIG_EXTRA_ENV_SETTINGS.

Same macros are used in U-Boot board code when reading information from
boot i2c data.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-04-26 17:18:39 +05:30
Pali Rohár
ac56055c41 board: freescale: p1_p2_rdb_pc: Fix env $vscfw_addr
Do not stringify env $vscfw_addr two times (once implicitly via string
operator "" and second time explicitly via __stringify() macro) and allow
to compile U-Boot without CONFIG_VSC7385_ENET (when __VSCFW_ADDR was not
defined and so macro name was stringified into CONFIG_EXTRA_ENV_SETTINGS).

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-04-26 17:18:39 +05:30
Pali Rohár
4aceaec585 board: freescale: p1_p2_rdb_pc: Detect both P2020 SD switch configurations
As written in comment, P2020 has two possible SD switch configurations.
Extend code to detect both of them.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-04-26 17:18:39 +05:30
Pali Rohár
ab37df9d22 powerpc: mpc85xx: Remove duplicate u-boot-nand.lds
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-04-26 17:18:39 +05:30
Eugen Hristev
6669291700 include: configs: at91/sam: remove stray #ifdef/#else
With the commit that moves the BOOTCOMMAND to Kconfig:

970bf8603b ("Convert CONFIG_USE_BOOTCOMMAND et al to Kconfig")

some stray ifdefs have been left in the header files which
are now useless.
Clean up the include files to remove these lines.

Fixes: 970bf8603b ("Convert CONFIG_USE_BOOTCOMMAND et al to Kconfig")
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2022-04-26 09:54:41 +03:00
Durai Manickam KR
b07a022964 board: Add sam9x60_curiosity support
Add board files, Kconfig, Makefile and MAINTAINERS.

Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com>
2022-04-26 09:50:24 +03:00
Tom Rini
11232139e3 nds32: Remove the architecture
As removal of nds32 has been ack'd for the Linux kernel, remove support
here as well.

Cc: Rick Chen <rick@andestech.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Rick Chen <rick@andestech.com>
2022-04-25 16:04:05 -04:00
Hou Zhiqiang
b416df33c9 configs: Layerscape: Remove the 'fdt_addr' env
On Layerscape platforms, the DTB is loaded from boot filesystem,
per the fdt_addr description in doc/README.distro, it must be
removed.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
[Rebased]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-04-25 12:50:39 +05:30
Tom Rini
6e2af641e4 u-boot-imx-20220422
-------------------
 
 - Switch to DM_SERIAL
 - Drop MMCROOT
 - several cleanup
 
 CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/11815
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCYmJq1Q8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76ZlxQCfQNPkQVf10kjENID/D9mu+Hl2tMEAnj8AMOyF
 iQrcw6oegrVvZZXV+s2J
 =XjAE
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20220422' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

u-boot-imx-20220422
-------------------

- Switch to DM_SERIAL
- Drop MMCROOT
- several cleanup

CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/11815
2022-04-22 08:12:20 -04:00
Heiko Thiery
d173b107be ARM: imx: imx8mn-evk: change environment address variables
Currently the space between kernel_addr_r and the fdt_addr_r is only 32MB.
To have enough space to load kernel images bigger than 32MB change the
variables to a feasible value.

The new environment variables layout is based on the scheme from
"include/configs/ti_armv7_common.h".

The CONFIG_SYS_LOAD_ADDR value is set to 0x42000000. With that we have
the same value as for the kernel_addr_r.

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2022-04-21 23:14:24 +02:00
Peng Fan
f5f3906d3a configs: imx: drop IMX_FEC_BASE
IMX_FEC_BASE is not used in these boards, so drop it.

Reviewed-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-04-21 23:00:26 +02:00
Peng Fan
c5b9bf5518 include/configs: drop COUNTER_FREQUENCY
Since we have CONFIG_COUNTER_FREQUENCY enabled, no need COUNTER_FREQUENCY

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-04-21 15:27:17 -04:00
Tom Rini
e50f66e364 Merge https://source.denx.de/u-boot/custodians/u-boot-marvell
- mrvl_uart.sh: Remove script (Pali)
- Fix Espressobin build for configs where ENV is not in SPI (Rogier)
- mvebu: a37xx: Add support for reading OTP (Pali)
- mvebu: uDPU: Ethernet fixes and misc DT and defconfig changes (Robert)
- mvebu: Add support for reading LD0 and LD1 eFuse (Pali)
- kwboot: Replace fstat()+st_size by lseek()+SEEK_END (Pali)
- mvebu: turris_omnia: Enable CONFIG_CMD_FUSE (Pali)
- arm: Add CONFIG_SPL_SYS_NO_VECTOR_TABLE used on 32bit MVEBU (Pali)
- mvebu: a37xx: Add support for writing Security OTP values (Pali)
- mvebu: turris: Misc enhancements and cleanups / fixes (Pali)
- Sheevaplug : Use Marvell uclass mvgbe and PHY driver for Ethernet (Tony)
2022-04-21 11:44:54 -04:00
Peng Fan
adfaa4284c configs: drop CONFIG_MMCROOT
CONFIG_MMCROOT is only used to set mmcroot, no need a dedicated macro.

Script as below
"
 for i in `ls include/configs/*.h`
 do
 mmcroot=`sed -n '/define.*MMCROOT/ p' $i  | awk -F\" '{ print $2;}'`

 if [ ! -n "$mmcroot" ]; then
 	continue
 fi

 sed -i '/define.*MMCROOT/ d' $i
 sed -i 's,\" CONFIG_MMCROOT \",'$mmcroot',g' $i

 done
"

Reviewed-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-04-21 15:18:17 +02:00
Paul Barker
a95cd68d51 board: ti: am335x: Add support for BBE Extended WiFi
The Sancloud BeagleBone Enhanced Extended WiFi (BBE Extended WiFi) has
its own devicetree file and the board can be identified by the 2nd
letter of the config string within the common EEPROM.

Signed-off-by: Paul Barker <paul.barker@sancloud.com>
2022-04-21 09:08:57 -04:00
Paul Barker
cde726442b board: ti: am335x: Add BBE Lite support
The Sancloud BeagleBone Enhanced Lite (BBE Lite) has its own devicetree
file and the board can be identified by the 2nd letter of the config
string within the common EEPROM.

Signed-off-by: Paul Barker <paul.barker@sancloud.com>
2022-04-21 09:08:57 -04:00
Peng Fan
c82622acdf configs: phycore_imx8mm/p: drop unused SDHC macro
With SPL_DM_MMC and DM_MMC, the two macros not needed, drop it.
 CONFIG_SYS_FSL_USDHC_NUM
 CONFIG_SYS_FSL_ESDHC_ADDR

Reviewed-by: Fabio Estevam <festevam@denx.de>
Acked-By: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-04-21 14:38:03 +02:00
Peng Fan
ec04c5a9d7 configs: imx8mm/n_venice: drop unused SDHC macro
With SPL_DM_MMC and DM_MMC, the two macros not needed, drop it.
 CONFIG_SYS_FSL_USDHC_NUM
 CONFIG_SYS_FSL_ESDHC_ADDR

Reviewed-by: Fabio Estevam <festevam@denx.de>
Acked-By: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-04-21 14:38:03 +02:00
Peng Fan
d3af06012a configs: verdin-imx8m: drop unused SDHC macro
With SPL_DM_MMC and DM_MMC, the two macros not needed, drop it.
 CONFIG_SYS_FSL_USDHC_NUM
 CONFIG_SYS_FSL_ESDHC_ADDR

Reviewed-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-04-21 14:38:03 +02:00
Peng Fan
ee5e8ee471 configs: imx8qm/qxp_evk: drop unused SDHC macro
With SPL_DM_MMC and DM_MMC, the two macros not needed, drop it.
 CONFIG_SYS_FSL_USDHC_NUM
 CONFIG_SYS_FSL_ESDHC_ADDR

Reviewed-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-04-21 14:38:03 +02:00
Peng Fan
0f82da2b90 configs: mx7dsabresd: drop unused SDHC macro
With SPL_DM_MMC and DM_MMC, the two macros not needed, drop it.
 CONFIG_SYS_FSL_USDHC_NUM
 CONFIG_SYS_FSL_ESDHC_ADDR

Reviewed-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-04-21 14:38:03 +02:00
Peng Fan
228e947fa4 configs: mx6sxsabresd: drop CONFIG_SYS_FSL_USDHC_NUM
With DM_MMC, CONFIG_SYS_FSL_USDHC_NUM is not needed.

Reviewed-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-04-21 14:38:03 +02:00
Peng Fan
893152f383 configs: imx8mn_evk: drop unused SDHC macro
With SPL_DM_MMC and DM_MMC, the two macros not needed, drop it.
 #define CONFIG_SYS_FSL_USDHC_NUM       2
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0

Reviewed-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-04-21 14:38:03 +02:00
Peng Fan
42d56cad63 configs: imx8mp_evk: drop unused SDHC macro
With SPL_DM_MMC and DM_MMC, the two macros not needed, drop it.
 #define CONFIG_SYS_FSL_USDHC_NUM       2
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0

Reviewed-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-04-21 14:38:03 +02:00
Peng Fan
ff234d75ff configs: imx8mm_evk: drop unused SDHC macro
With SPL_DM_MMC and DM_MMC, the two macros not needed, drop it.
 #define CONFIG_SYS_FSL_USDHC_NUM       2
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0

Reviewed-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-04-21 14:38:03 +02:00
Ian Ray
2e26a76eb0 configs: ge_bx50v3: remove CONFIG_PCIE_IMX_POWER_GPIO
This GPIO is actually an input "Q7_3V3_PCIE_WAKE#_IN" not an output, so
remove the misleaading and incorrect definition.

Cc: Tim Harvey <tharvey@gateworks.com> (re: pci: imx: use vpcie-supply if defined by device-tree)
Signed-off-by: Ian Ray <ian.ray@ge.com>
2022-04-21 14:38:03 +02:00
Tony Dinh
ac47bd230c arm: kirkwood: Sheevaplug : Use Marvell uclass mvgbe and PHY driver for Ethernet
The Globalscale Technologies Sheevaplug board has the network chip
Marvell 88E1116R. Use uclass mvgbe and the compatible driver M88E1310
driver to bring up Ethernet.

- Remove CONFIG_RESET_PHY_R symbol from all board files
- Use uclass mvgbe to bring up the network. And remove ad-hoc code.
- Enable CONFIG_PHY_MARVELL to properly configure the network.
- Miscellaneous changes: Move constants to .c file and remove header file
board/Marvell/sheevaplug/sheevaplug.h, use BIT macro, and add/cleanup
comments.

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
2022-04-21 13:14:52 +02:00
Marcel Ziswiler
fc102c87c1 board: toradex: drop colibri pxa270 support
The Colibri PXA270 has been end-of-life since quite a while and would
require more and more maintenance (e.g. DM conversions).

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-04-21 12:48:30 +02:00
Tim Harvey
2395625209 board: gateworks: venice: add imx8mp-venice-gw740x support
The GW74xx is based on the i.MX 8M Plus SoC featuring:
 - LPDDR4 DRAM
 - eMMC FLASH
 - Gateworks System Controller
 - PCIe Gen 3.0 switch (build option)
 - USB 3.0 HUB
 - USB Type-C front panel connector
 - GPS
 - 3-axis accelerometer
 - CAN bus
 - 6x GbE RJ45 front-panel jacks
  - 1x IMX8M FEC RGMII GbE (with Passive PoE)
  - 5x IMX8M EQOS RGMII 6 port GbE Switch
    (1x with 802.3af class 5 Active PoE)
 - RS232/RS485/RS422 serial transceiver
 - MIPI header (DSI/CSI/GPIO/PWM/I2S)
 - DigI/O header (UART/GPIO/I2C/ADC)
 - 802.11ac WiFi
 - Bluetooth BLE
 - 3x MiniPCIe sockets with PCI/USB
 - 1x M.2 Socket with USB2.0, PCIe, and dual-SIM
 - PMIC
 - Wide range DC input supply (8V to 60V DC)

Do the following to add support for this and future imx8mp-venice boards:
 - add dts
 - add DRAM config
 - add PMIC config
 - add IMX8MP support in spl.c and venice.c

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-04-21 12:44:24 +02:00
Tim Harvey
61cf225053 board: gateworks: gw_ventana: use comomn GSC driver
Use the common GSC driver.

This allows us to do some additional cleanup:
 - use the GSC driver functions
 - move waiting for the EEPROM to the SPL int (it will always be ready
   after this)
 - move eeprom functions into eeprom file and elimate GSC_I2C_BUS
 - eliminate some redundant EEPROM reads (the EEPROM must be read in
   SPL before relocation, in SPL after relocation, and in U-Boot init.
   All subsequent uses can use the global structure)
 - remove unnecessary header files and alphabatize includes

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-04-21 12:44:24 +02:00
Tim Harvey
c574736915 configs: imx8m{m,n}_venice_defconfig: add usb support
Enable USB support for host controller and various USB ethernet
devices.

Example usage of USB Mass Storage (UMS) support:
 u-boot=> mmc list
 FSL_SDHC: 0
 FSL_SDHC: 1
 FSL_SDHC: 2 (eMMC)
 u-boot=> ums 0 mmc 2
 UMS: LUN 0, dev mmc 2, hwpart 0, sector 0x0, count 0xe30000

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-04-21 12:44:23 +02:00
Tim Harvey
fd5c7173ad imx8m{m,n}_venice: update env memory layout
Update distro config env memory layout:
 - loadaddr=0x48200000 allows for 130MB area for uncompressing (ie FIT
   images, kernel_comp_addr_r)
 - fdt_addr_r = loadaddr + 128MB - allows for 128MB kernel
 - scriptaddr = fdt_addr_r + 512KB - allows for 512KB fdt
 - ramdisk_addr_r = scriptaddr + 512KB - allows for 512KB script

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-04-21 12:44:23 +02:00
Marcel Ziswiler
3f7d518acc configs: tdx: apalis/colibri_imx6: use preboot as well
Use PREBOOT as well. This allows a customer to just set fdt_board as
on any other module to customize the device tree for his carrier
board.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-04-21 12:44:23 +02:00
Marcel Ziswiler
405c97fd1d configs: tdx: apalis_imx6: drop hw v1.0 support
Drop optional support for the ancient Apalis iMX6 V1.0 hardware which
had the UART wired as DCE rather than DTE.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-04-21 12:44:23 +02:00
Igor Opaniuk
1410cba567 toradex: drop legacy nfsboot script
Drop legacy nfsboot script in favor of distroboot DHCP boot.

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-04-21 12:44:23 +02:00
Igor Opaniuk
1377a776c3 toradex: set default dhcp distroboot scriptname
Use the same name of DHCP Distroboot script as in regular eMMC case.

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-04-21 12:44:23 +02:00
Denys Drozdov
47bcc0d056 toradex: apalis-imx8x: drop support for apalis imx8x
Drop Apalis iMX8X platform as it never left sample state and is no
longer supported.

Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-04-21 12:44:23 +02:00
Tom Rini
24c904f309 Convert CONFIG_SYS_MEM_TOP_HIDE to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_MEM_TOP_HIDE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-19 14:52:34 -04:00
Johan Jonker
33f4750783 rockchip: rk3066: add core support
Add the core architecture code for the rk3066.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-04-18 11:25:13 +08:00
Johan Jonker
54562045e5 rockchip: move ROCKCHIP_STIMER_BASE to Kconfig
Move ROCKCHIP_STIMER_BASE to Kconfig.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-04-18 11:25:12 +08:00
Vagrant Cascadian
48cd7a1f6c rockchip: Enable SCSI in distro bootcmd for rk3399.
Include SCSI in the list of boot targets if CONFIG_CMD_SCSI is
enabled.

Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-04-18 11:25:12 +08:00
Tom Rini
9859465bfe Pull request for efi-2022-07-rc1-2
Documentation:
 
 * Describe env command
 
 UEFI
 
 * simplify Unicode string functions
 * clean up the usage of GUIDs for capsule updates
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAmJZTvsACgkQxIHbvCwF
 GsTbOg//XtOKXKHsWIq0cDgxxUTM2iSWCwzw2rSO3VPbzjeRekBCH3+I6D6hCHmp
 ikSPB8LBRRMEkBPq18LdXY9oaV6keRGgLNtiLATKLMHsJ9USkCqNzdSegCIWFl0T
 2N5Rm/qdh90csGyIzEk+qPOLBNP/St/aTO6n7b9+FgZ6Hy2dwXTjnNzPFEnz3hCY
 KjlOxIWsgofb9Iem4f+mMhgiBjM161yqWMd2ND/EDn3RRjrAh/ZWRcD/nWirZxeO
 uwn+8bMjDfO83yICS1txp6mbvtFHhrktSo6hc7Ga5m+5kmlPBcgKnKEIUgrKuNd/
 Jyr12MLBtI7oyETr+CY9vPQTciWBU17cW2TO7CIBDQt3QtfvVBrWaGe4barPLPzx
 hvyKzrflRDTFUKoG+f/XGN2YSvYw+QXVXZjBqYDwOepT7oq6lWpf7gtxNQNG5RZI
 uOwk95VT/cVh7S8qp1ioD+tGtvA9PeMyuh8mryD2kYrJh4bbGimfyP2Z6e/aIRNi
 RnczTAFDXoA4g32DP8/3Im43rSIv685e4N0YnDF+ZyKALxyflZAPXT0MY8FLfGyE
 x6Zb1t45W8thIDhBLNjurBge4NTFuCq0NM8mszOHMFBgO7PDIMEX+9uZOvhrhYbs
 a7XYFIEIcZZiLqkNjwr7B+D7Ya6q7gYvcqAo6rgtbDNs5QpH/0A=
 =UQMn
 -----END PGP SIGNATURE-----

Merge tag 'efi-2022-07-rc1-2' of https://source.denx.de/u-boot/custodians/u-boot-efi

Pull request for efi-2022-07-rc1-2

Documentation:

* Describe env command

UEFI

* simplify Unicode string functions
* clean up the usage of GUIDs for capsule updates
2022-04-15 14:29:52 -04:00
Tom Rini
7f418ea598 Merge branch 'next' of https://source.denx.de/u-boot/custodians/u-boot-net
- DM9000 DM support
- tftp server bug fix
- mdio ofnode support functions
- Various phy fixes and improvements.

[trini: Fixup merge conflicts in drivers/net/phy/ethernet_id.c
drivers/net/phy/phy.c include/phy.h]
2022-04-15 08:10:32 -04:00
Sughosh Ganu
741ef86728 capsule: board: Add information needed for capsule updates
Add a structure which defines the information that is needed for
executing capsule updates on a platform. Some information in the
structure like the dfu string is used for making the update process
more robust while some information like the per platform image GUIDs
is used for fixing issues. Initialise this structure in the board
file, and use the information for the capsule updates.

Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
2022-04-15 10:43:18 +02:00
Marek Vasut
0154e6de37 configs: net: dm9000: Move new Kconfig option to board configs
Drop legacy #define CONFIG_DRIVER_DM9000 from board include/configs/
and enable the same in Kconfig configs/ .

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2022-04-13 15:14:31 +03:00
Heiko Thiery
76975d415b include: configs: *imx8*: remove IMX_FEC_BASE
The IMX_FEC_BASE value is not used when CONFIG_DM_ETH is configured. So this
value can be removed.

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Reviewed-By: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-04-12 21:18:02 +02:00
Heiko Thiery
fee2d974f1 kontron-pitx-imx8m: change environment address variables
Currently the space between kernel_addr_r and the fdt_addr_r is only 32MB.
To have enought space to load kernel images bigger than 32MB change the
variables to a feasible value.

The new environment variables layout is based on the scheme from
"include/configs/ti_armv7_common.h".

The CONFIG_SYS_LOAD_ADDR value is set to 0x42000000. With that we have
the same value as for the kernel_addr_r.

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
2022-04-12 21:13:56 +02:00
Marek Vasut
d7f72b6830 ARM: dts: imx8mm: Add i.MX8M Mini Toradex Verdin based Menlo board
Add new board based on the Toradex Verdin iMX8M Mini SoM, the MX8Menlo.
The board is a compatible replacement for i.MX53 M53Menlo and features
USB, multiple UARTs, ethernet, LEDs, SD and eMMC.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Cc: Max Krummenacher <max.krummenacher@toradex.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2022-04-12 21:08:23 +02:00
Tim Harvey
f3722dd6da imx8m{m,n}_venice: update boot_net script to load fdt
Update the 'boot_net' script to load the fdt with the kernel.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-04-12 21:08:22 +02:00
Marek Vasut
bba6cc7018 ARM: dts: imx: Add support for Data Modul i.MX8M Mini eDM SBC
Add support for Data Modul i.MX8M Mini eDM SBC board. This is an
evaluation board for various custom display units. Currently
supported are serial console, ethernet, eMMC, SD, SPI NOR,
USB host and USB OTG.

Reviewed-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2022-04-12 19:10:44 +02:00
Ariel D'Alessandro
6c317fedc7 bsh: imx8mn-smm-s2/pro: Add iMX8MN BSH SMM S2 boards
Introduce BSH SystemMaster (SMM) S2 board family, which consists of:
iMX8MN SMM S2 and iMX8MN SMM S2 PRO boards.

Add support for iMX8MN BSH SMM S2 board:

- 256 MiB DDR3 RAM
- 512MiB Nand
- USBOTG1 peripheral - fastboot.
- 100Mbit Ethernet

Add support for iMX8MN BSH SMM S2 PRO board:

- 512 MiB DDR3 RAM
- 8 GiB eMMC
- USBOTG1 peripheral - fastboot.
- 100Mbit Ethernet

Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
2022-04-12 19:10:44 +02:00
Oleksandr Suvorov
338b9b9a19 colibri-imx6ull: drop vidargs and remove video= settings
Since we envision using overlays for display interfaces, the video=
settings within vidargs are obsolete. Remove these settings from the
U-Boot.

Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-04-12 19:10:44 +02:00
Philippe Schenker
05cc835135 include: colibri_vf: add missing tdxargs variable
All the other NAND-based boards have tdxargs specified for setting
manual kernel command-line arguments.

Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-04-12 19:10:44 +02:00
Ye Li
38149cd0cc imx: imx8ulp: Set COUNTER_FREQUENCY to 1Mhz
The COUNTER_FREQUENCY is missed in 8ulp configs, it will cause SPL
and u-boot not set the cntfrq_el0. For u-boot, this is ok, because
ATF has set it. But for SPL, it will lead delay and get_timer
not working.

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-04-12 17:33:56 +02:00
Adam Ford
7990277a7b arm: imx: imx8mn_beacon: Remove unnecessary configs
Because the Beacon imx8mn board uses device tree
for MMC/SD and Ethernet, there is no need to have some of the
config options. It's handled by the device tree.

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-04-12 17:33:55 +02:00
Adam Ford
1a831a383c arm: imx: imx8mm_beacon: Remove unnecessary configs
Because the Beacon imx8mm board uses device tree
for MMC/SD and Ethernet, there is no need to have some of the
config options. It's handled by the device tree.

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-04-12 17:33:55 +02:00
Tom Rini
6751b70055 arm: fsl-layerscape: Migrate more DP-DDR options to Kconfig
Based on current usage, migrate a number of DP-DDR related options to
Kconfig.

Cc: Priyanka Jain <priyanka.jain@nxp.com>
Cc: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08 10:46:22 -04:00
Tom Rini
001a56b008 siemens-am33x-common: Drop CONFIG_DMA_COHERENT*
These values are not used in the code, remove them.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08 10:46:22 -04:00
Tom Rini
d9180c3035 m53menlo: Drop CONFIG_DISCOVER_PHY
This is not used in code, drop.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08 10:46:22 -04:00
Tom Rini
d43cd486ee Convert CONFIG_FSL_QIXIS et al to Kconfig
This converts the following to Kconfig:
   CONFIG_FSL_QIXIS
   CONFIG_QIXIS_I2C_ACCESS

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08 10:46:22 -04:00
Tom Rini
388de0fa8b Convert CONFIG_DIMM_SLOTS_PER_CTLR to Kconfig
This converts the following to Kconfig:
   CONFIG_DIMM_SLOTS_PER_CTLR

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08 10:46:22 -04:00
Tom Rini
bef12ea4a3 galileo: Remove CONFIG_DESIGNWARE_ETH reference
This platform has CONFIG_ETH_DESIGNWARE set already, which is the
correct value for the driver in question.  Remove this incorrect line.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08 10:46:22 -04:00
Tom Rini
f83f0cb4c7 microblaze: Migrate DCACHE/ICACHE to Kconfig
Move these two options to the arch Kconfig file.

Cc: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
2022-04-08 10:46:22 -04:00
Tom Rini
6c3c05f6a4 tegra: Drop CONFIG_CHROMEOS_EXTRA_ENV_SETTINGS
This is not currently set by any boards, so drop.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08 10:46:22 -04:00
Tom Rini
53dbf1160d controlcenterdc: Migrate CUSTOMER_BOARD_SUPPORT to Kconfig
This symbol is only possibly useful on some mvebu platforms, so move the
symbol there and select it for the only current user.

Cc: Mario Six <mario.six@gdsys.cc>
Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-04-08 10:46:22 -04:00
Tom Rini
55b3ba4c2b spi: cadence_qspi: Migrate CONFIG_CQSPI_REF_CLK to Kconfig
This is a little tricky since SoCFPGA has code to determine this as
runtime.  Introduce a guard variable for platforms to select if they
have a static value to use.  Then for ARCH_SOCFPGA, call
cm_get_qspi_controller_clk_hz() and otherwise continue the previous
behavior.

Cc: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08 10:46:22 -04:00
Tom Rini
5d14c336b2 Convert CONFIG_SH_SCIF_CLK_FREQ to Kconfig
This converts the following to Kconfig:
   CONFIG_SH_SCIF_CLK_FREQ

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08 09:06:46 -04:00
Tom Rini
f9f3209a34 Convert CONFIG_CONS_SCIF0 et al to Kconfig
This converts the following to Kconfig:
   CONFIG_CONS_SCIF0
   CONFIG_CONS_SCIF1
   CONFIG_CONS_SCIF2
   CONFIG_CONS_SCIF4
   CONFIG_CONS_SCIFA0

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08 09:06:28 -04:00
Tom Rini
8c3e231b8f at91: Remove unused LED code
These LED files (and CONFIG values) are unused today, remove the code in
question.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08 09:05:20 -04:00
Tom Rini
a62acac12a stm32f429-discovery: Migrate CONFIG_*_LED out of CONFIG namespace
These values are only used in one file, reference them more directly.

Cc: Kamil Lulko <kamil.lulko@gmail.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: uboot-stm32@st-md-mailman.stormreply.com
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-04-08 09:05:20 -04:00
Tom Rini
e0f0f1836b corvus: Migrate CONFIG_*_LED out of CONFIG namespace
This code is only used on the corvus platform, so migrate the LED on/off
code to this platform and remove it from the CONFIG namespace.  In
theory, this should likely be moved to the modern GPIO LED driver as a
further cleanup.

Cc: Heiko Schocher <hs@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2022-04-08 09:05:20 -04:00
Tom Rini
8ab7647297 MPC837XERDB: Stop using CONFIG_RAMDISKFILE
We don't really configure this, just set it directly in the environment
section.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08 09:05:20 -04:00
Tom Rini
428eb2e26f s5p_goni, smdkc100: Move some environment settings out of CONFIG
A number of CONFIG options are used on these platforms as part of the
default environment.  Set some of these more directly and in other
cases, just reference them directly.

Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08 09:05:19 -04:00
Tom Rini
f01928e232 arm: integrator: Migrate platform-specific options and cleanup armcoremodule.h
This converts the following to Kconfig:
   CONFIG_CM_INIT
   CONFIG_CM_REMAP
   CONFIG_CM_SPD_DETECT
   CONFIG_CM_MULTIPLE_SSRAM
   CONFIG_CM_TCRAM

We make the first three of these options be always enabled, as that
matches usage.  We select the last two based on how they were defined in
armcoremodule.h.  This also allows us to remove some unused code in
board/armltd/integrator/lowlevel_init.S

Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08 09:05:19 -04:00
Tom Rini
dafcd96d8a Convert CONFIG_CMDLINE_PS_SUPPORT to Kconfig
This converts the following to Kconfig:
   CONFIG_CMDLINE_PS_SUPPORT

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08 09:05:19 -04:00
Tom Rini
bd3ef27886 tegra: Migrate CI_UDC_HAS_HOSTPC to Kconfig
This option is only enabled for CI_UDC and !TEGRA20, so implement it as
such in Kconfig directly.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
2022-04-08 09:05:19 -04:00
Tom Rini
95b641756c Convert CONFIG_BOARD_SIZE_LIMIT to Kconfig
This converts the following to Kconfig:
   CONFIG_BOARD_SIZE_LIMIT

To do this, introduce CONFIG_HAS_BOARD_SIZE_LIMIT.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08 09:05:19 -04:00
Lukasz Majewski
1610b68ea3 power: Rename CONFIG_POWER_TPS65217 with CONFIG_PMIC_TPS65217
Up till now the CONFIG_POWER_TPS65217 has been defined in several header
files for am335x SoC.

This patch renames it to CONFIG_PMIC_TPS65217, which better reflects the
role of this IC circuit.

Moreover, new CONFIG_PMIC_TPS65217 has been introduced in Kconfig
to be used with boards, which both support DM_PMIC and DM_I2C.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
[trini: Migrate all other platforms as well]
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-05 15:51:46 -04:00
Tom Rini
59bffec43a Merge branch '2022-04-04-platform-updates'
- Updates for exynos78x0 and TI K3 platforms
2022-04-05 13:45:22 -04:00
Tom Rini
037ef53cf0 Xilinx changes for v2022.07-rc1 v2
xilinx:
 - Allow booting bigger kernels till 100MB
 
 zynqmp:
 - DT updates (reset IDs)
 - Remove unneeded low level uart initialization from psu_init*
 - Enable PWM features
 - Add support for 1EG device
 
 serial_zynq:
 - Change fifo behavior in DEBUG mode
 
 zynq_sdhci:
 - Fix BASECLK setting calculation
 
 clk_zynqmp:
 - Add support for showing video clock
 
 gpio:
 - Update slg driver to handle DT flags
 
 net:
 - Update ethernet_id code to support also DM_ETH_PHY
 - Add support for DM_ETH_PHY in gem driver
 - Enable dynamic mode for SGMII config in gem driver
 
 pwm:
 - Add driver for cadence PWM
 
 versal:
 - Add support for reserved memory
 
 firmware:
 - Handle PD enabling for SPL
 - Add support for IOUSLCR SGMII configurations
 
 include:
 - Sync phy.h with Linux
 - Update xilinx power domain dt binding headers
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCYkxUZwAKCRDKSWXLKUoM
 IXJ2AKCQcoFK7wanCCvZfuEJCSwO5E4eCACginE2CFVXKcY1P8ta4ESusjY2TH0=
 =HOoS
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2022.07-rc1-v2' of https://source.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx changes for v2022.07-rc1 v2

xilinx:
- Allow booting bigger kernels till 100MB

zynqmp:
- DT updates (reset IDs)
- Remove unneeded low level uart initialization from psu_init*
- Enable PWM features
- Add support for 1EG device

serial_zynq:
- Change fifo behavior in DEBUG mode

zynq_sdhci:
- Fix BASECLK setting calculation

clk_zynqmp:
- Add support for showing video clock

gpio:
- Update slg driver to handle DT flags

net:
- Update ethernet_id code to support also DM_ETH_PHY
- Add support for DM_ETH_PHY in gem driver
- Enable dynamic mode for SGMII config in gem driver

pwm:
- Add driver for cadence PWM

versal:
- Add support for reserved memory

firmware:
- Handle PD enabling for SPL
- Add support for IOUSLCR SGMII configurations

include:
- Sync phy.h with Linux
- Update xilinx power domain dt binding headers
2022-04-05 11:27:39 -04:00
Michal Simek
cf5ed341e4 xilinx: Increase max size of image from 60 to 100MB
Recently big Linux kernels can have more then 60MB that's why increase this
limit to also cover these large kernels.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/f52f7c8ea419d69b248ba1460a96d1635194e128.1648551279.git.michal.simek@xilinx.com
2022-04-05 13:26:10 +02:00
Dzmitry Sankouski
d5c4ec4aa3 board: axy17lte: get board usable - add bootcmd and docs
U-boot is intended to replace linux kernel in android boot image(ABL), and
it's FIT payload to replace initramfs file. The boot process is similar to
boot image with linux:
- android bootloader (ABL) unpacks android boot image
- ABL sets `linux,initrd-start property` in chosen node in unpacked FDT
- ABL sets x0 register to FDT address, and passes control to u-boot
- u-boot reads x0 register, and stores it in `prevbl_fdt_addr` env variable
- u-boot reads `linux,initrd-start` property,
and stores it in `prevbl_initrd_start_addr`

In this way, u-boot bootcmd relies on `prevbl_initrd_start_addr` env
variable, and boils down to `bootm $prevbl_initrd_start_addr`.
If more control on boot process is desired, pack a boot script in
FIT image, and put it to default configuration

What done:
- Rearrange defconfig option order
- Add CONFIG_SAVE_PREV_BL_* options
- Doc updates:
  - remove wrong SBOOT memory corruption note, because
  memory is changed during u-boot bringup process,
  not by SBOOT
  - put payload on ramdisk place in abl boot image
  creation step

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
2022-04-04 19:02:03 -04:00
Dzmitry Sankouski
f8a1b33889 board: starqltechn: get board usable - add bootcmd and docs
U-boot is intended to replace linux kernel in android boot image(ABL), and
it's FIT payload to replace initramfs file. The boot process is similar to
boot image with linux:
- android bootloader (ABL) unpacks android boot image
- ABL sets `linux,initrd-start property` in chosen node in unpacked FDT
- ABL sets x0 register to FDT address, and passes control to u-boot
- u-boot reads x0 register, and stores it in `prevbl_fdt_addr` env variable
- u-boot reads `linux,initrd-start` property,
and stores it in `prevbl_initrd_start_addr`

In this way, u-boot bootcmd relies on `prevbl_initrd_start_addr` env
variable, and boils down to `bootm $prevbl_initrd_start_addr`.
If more control on boot process is desired, pack a boot script in
FIT image, and put it to default configuration

What done:
- strip unneeded config options
- add FIT image support
- add framebuffer node, u-boot logo and video console
- increase LMB_MAX_REGIONS, to store all linux dtb reserved memory regions
- add linux kernel image header

Uart driver causes hang, when u-boot is used in android boot image instead
of linux. Temporary disable console driver, until investigated and fixed.

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
2022-04-04 15:06:11 -04:00
Alexander Graf
5c9b420ada qemu-arm: Enable NVMe for distro boot
We already support the NVMe commands and PCIe backend in the QEMU target,
so let's make it easy for anyone to consume them and enable NVMe distro
boot along the way!

With this patch, I can put an NVMe backed disk image into my QEMU VM and
have it automatically load a UEFI target blob.

Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
2022-04-04 14:53:26 -04:00
Tom Rini
01f1ab67f3 Merge branch 'next'
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-04 10:48:44 -04:00
Sean Anderson
93c3d32970 ls1046ardb: Add support for JTAG boot
This adds support for booting entirely from JTAG while using a
hard-coded RCW. With these steps, it is not necessary to program a
"good" RCW using CodeWarrior. The method here can be performed with any
JTAG adapter supported by OpenOCD, including the on-board CMSIS-DAP
(albeit very slowly).

These steps require LS1046A support in OpenOCD, which was added in [1].

[1] 5b70c1f679/

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
[trini: Add reference to doc/board/nxp/ls1046ardb.rst]
2022-04-01 16:56:44 -04:00
Sean Anderson
dcc4f9623e arm: smh: Remove smhload command
This command's functionality is now completely implemented by the
standard fs load command. Convert the vexpress64 boot command (which is
the only user) and remove the implementation.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
2022-04-01 15:03:13 -04:00
Peter Hoyes
8d78a6b674 vexpress64: Add ARMv8R-64 board variant
The ARMv8-R64 architecture introduces optional VMSA (paging based MMU)
support in the EL1/0 translation regime, which makes that part mostly
compatible to ARMv8-A.

Add a new board variant to describe the "BASE-R64" FVP model, which
inherits a lot from the existing v8-A FVP support. One major difference
is that the memory map in "inverted": DRAM starts at 0x0, MMIO is at
2GB [1].

 * Create new TARGET_VEXPRESS64_BASER_FVP target, sharing most of the
   exising configuration.
 * Implement inverted memory map in vexpress_aemv8.h
 * Create vexpress_aemv8r defconfig
 * Provide an MMU memory map for the BASER_FVP
 * Update vexpress64 documentation

At the moment the boot-wrapper is the only supported secure firmware. As
there is no official DT for the board yet, we rely on it being supplied
by the boot-wrapper into U-Boot, so use OF_HAS_PRIOR_STAGE, and go with
a dummy DT for now.

[1] https://developer.arm.com/documentation/100964/1114/Base-Platform/Base---memory/BaseR-Platform-memory-map

Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
[Andre: rebase and add Linux kernel header]
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
[trini: Add MAINTAINERS entry for Peter]
2022-04-01 15:03:03 -04:00
Andre Przywara
30cacb8123 vexpress64: generalise page table generation
In preparation for the ARMv8-R64 FVP support, which has DRAM mapped at
0x0, generalise the page table generation, by using symbolic names for
the address ranges instead of fixed numbers.

We already define the base of the DRAM and MMIO regions, so just use
those symbols in the page table description. Rename V2M_BASE to the more
speaking V2M_DRAM_BASE on the way.

On the VExpress memory map, the address space right after 4GB is of no
particular interest to software, as the whole of DRAM is mapped at 32GB
instead. The first 2 GB alias to the lower 2GB of DRAM mapped below 4GB,
so we skip this part and map some more of the high DRAM, should anyone
need it.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-04-01 14:59:15 -04:00
Andre Przywara
8a0a8ff52c vexpress64: fvp: add distro_boot support
So far the FVP model just supports booting through semihosting, so by
loading files from the host the model is running on. This allows for
quick booting of new kernels (or replacing DTBs), but prevents more
featureful boots like using UEFI.

Enable the distro_boot feature, and provide a list of possible boot
sources that U-Boot should check:
- For backwards compatibility we start with semihosting, which gets its
  commands migrated from CONFIG_BOOTCOMMAND into the distro_boot
  infrastructure. This is also slightly tweaked to fail graceful in case
  the required files could not be found.
- Next we try to use a user provided script, that could be easily
  placed into memory using the model command line.
- Since we gained virtio support with the enablement of OF_CONTROL,
  let's check virtio block devices next. This is where UEFI boot can
  be easily used, for instance by providing a distro installer .iso
  file through virtio-blk.
- Networking is now provided by virtio as well, so enable the default
  PXE and DHCP boot flows, mostly because we can.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-04-01 14:58:16 -04:00
Andre Przywara
e09ec8e340 vexpress64: config header: unify environment definition
The definition of the standard environment variables (kernel_addr_r and
friends) has been improved lately for the FVP model, but the Juno board
is still using some custom scheme.
Since we need to extend this to a third board soon, let's unify the
definition:
- Define the Juno addresses in the same generic way we do for the FVP
  model, and move the actual variable setting out of the board #ifdef's.
- Add the missing addresses for a PXE file and a boot script.
- Cleanup some stale comments on the way.

As the FVP model doesn't have support for distro_boot quite yet, add
a dummy definition for now, to be replaced with the real thing later.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-04-01 14:56:26 -04:00
Tom Rini
e4d741f8ab Convert CONFIG_SYS_MONITOR_BASE to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_MONITOR_BASE

Note that for how this is re-used on some PowePC platforms, we introduce
CONFIG_SPL_SYS_MONITOR_BASE and CONFIG_TPL_SYS_MONITOR_BASE and use the
CONFIG_VAL macro to get the correct value at build time, in the code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:47 -04:00
Tom Rini
d4a2c400d1 Convert CONFIG_NORFLASH_PS32BIT to Kconfig
This converts the following to Kconfig:
   CONFIG_NORFLASH_PS32BIT

Note that we also attempt to correct the behavior of the code here,
which had been testing for "NORFLASH_PS32BIT" which would never be set,
instead check for the now set "CONFIG_NORFLASH_PS32BIT", which results
in some behavior change.

Cc: TsiChung Liew <Tsi-Chung.Liew@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:47 -04:00
Tom Rini
2c32f24f95 at91: Switch to SD_BOOT / CONFIG_NAND_BOOT
The values CONFIG_SYS_USE_NANDFLASH and CONFIG_SYS_USE_MMC serve the
same purpose as CONFIG_SD_BOOT / CONFIG_NAND_BOOT so migrate to using
these switches instead as they're already in Kconfig.

Cc: Stelian Pop <stelian@popies.net>
Cc: Heiko Schocher <hs@denx.de>
Cc: Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:47 -04:00
Tom Rini
f2428acbf1 Convert CONFIG_E300 et al to Kconfig
This converts the following to Kconfig:
   CONFIG_E300
   CONFIG_E5500

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:47 -04:00
Tom Rini
f13d7e21fc mx53loco: Convert CONFIG_DIALOG_POWER to Kconfig
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:47 -04:00
Tom Rini
38c108f88d exynos: Drop CONFIG_DEVICE_TREE_LIST
This value isn't used anywhere, drop it.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:47 -04:00
Tom Rini
28f9c3125d Convert CONFIG_DEEP_SLEEP to Kconfig
This converts the following to Kconfig:
   CONFIG_DEEP_SLEEP

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:47 -04:00
Tom Rini
ac28e20842 M5329EVB, M5373EVB: Remove CONFIG_NANDFLASH_SIZE
In the case of M5373EVB we always had NANDFLASH_SIZE=16, so just use it
directly.  In the case of M5329EVB we had not removed the rest of NAND
support when saying we didn't have NAND, so instead use that to key off
of rather than NANDFLASH_SIZE.

Cc: TsiChung Liew <Tsi-Chung.Liew@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:47 -04:00
Tom Rini
225aaacf36 db-mv784mp-gp: Rename CONFIG_DB_784MP_GP to CONFIG_TARGET_DB_MV784MP_GP
The value CONFIG_DB_784MP_GP is only used in the DDR code to refer to
CONFIG_TARGET_DB_MV784MP_GP so just use that second value directly.

Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-04-01 10:28:47 -04:00
Tom Rini
53f2222c71 p1_p2_rdb: Remove CONFIG_CPLD_[BO]R_PRELIM
These are not referenced in code, drop.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:47 -04:00
Tom Rini
15b4aed473 Convert CONFIG_CLOCKS to Kconfig
This converts the following to Kconfig:
   CONFIG_CLOCKS

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:47 -04:00
Tom Rini
b20e79f0bb Convert CONFIG_CLOCK_SYNTHESIZER to Kconfig
This converts the following to Kconfig:
   CONFIG_CLOCK_SYNTHESIZER

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:47 -04:00
Tom Rini
a9ee1ad95a exynos: Drop CONFIG_CLK_*
We only set one of these values ever at this point, so remove dead code.

Cc: Minkyu Kang <mk7.kang@samsung.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2022-04-01 10:28:47 -04:00
Tom Rini
d7b7e3e906 Convert CONFIG_SYS_USE_NORFLASH et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_USE_NORFLASH
   CONFIG_SYS_USE_BOOT_NORFLASH

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:46 -04:00
Tom Rini
36a4dae18f global: Remove CONFIG_SYS_USE_DATAFLASH*
There are a handful of variants around CONFIG_SYS_USE_DATAFLASH and none
of them now control anything further within their board config.h files,
so remove these from CONFIG_SYS_EXTRA_OPTIONS and then remove the empty
blocks in the board config.h files.  In a few places further clean up
related logic.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:46 -04:00
Tom Rini
db48e52584 Convert CONFIG_LPUART et al to Kconfig
This converts the following to Kconfig:
   CONFIG_LPUART
   CONFIG_LPUART_32B_REG

And note that CONFIG_LPUART_32B_REG is unused in code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:46 -04:00
Tom Rini
11f077bb20 mpc8548cds: Rework CONFIG_LEGACY usage
This CONFIG option is used in one place, so pick a more direct name and
migrate to Kconfig.  Rework the code slightly.

Cc: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:46 -04:00
Tom Rini
3c205a6e4a Convert CONFIG_MCFRTC et al to Kconfig
This converts the following to Kconfig:
   CONFIG_MCFRTC
   CONFIG_SYS_MCFRTC_BASE

While at it, remove '#undef RTC_DEBUG' from these config files.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:46 -04:00
Tom Rini
b7872641a8 stmark2: Remove CONFIG_SERIAL_FLASH
This is not referenced anywhere, remove it.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:46 -04:00
Tom Rini
143a365a5b Convert CONFIG_MCFTMR to Kconfig
This converts the following to Kconfig:
   CONFIG_MCFTMR

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:46 -04:00
Tom Rini
f88e9f5ab8 Convert CONFIG_CF_DSPI to Kconfig
This converts the following to Kconfig:
   CONFIG_CF_DSPI

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:46 -04:00
Tom Rini
c3cdca48df atmel: Remove CONFIG_SPL_ATMEL_SIZE
This seems to be unused in the code, remove it.

Cc: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:46 -04:00
Tom Rini
47267f8261 Remove CONFIG_BOARDNAME and CONFIG_BOARD_NAME
Both of these variables are used in a few hard-coded ways to set some
string values or print something to the user.  In almost all cases, it's
just as useful to hard-code the value used.  The exception here is
printing something closer to correct board name for p1_p2_rdb machines.
This can be done using something from the device tree, but for now
hard-code a non-CONFIG based value instead.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:46 -04:00
Tom Rini
448dfb407f Convert CONFIG_BITBANGMII_MULTI to Kconfig
This converts the following to Kconfig:
   CONFIG_BITBANGMII_MULTI

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:46 -04:00
Tom Rini
797c2b4a1a Convert CONFIG_BCM2835_GPIO to Kconfig
This converts the following to Kconfig:
   CONFIG_BCM2835_GPIO

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:46 -04:00
Tom Rini
439cc7fb05 Finish converting CONFIG_BOOTM_NETBSD et al to Kconfig
This converts the following to Kconfig:
   CONFIG_BOOTM_NETBSD
   CONFIG_BOOTM_RTEMS
   CONFIG_DESIGNWARE_WATCHDOG
   CONFIG_DISPLAY_CPUINFO
   CONFIG_DM_ETH
   CONFIG_DM_MMC
   CONFIG_DM_REGULATOR
   CONFIG_DM_SPI
   CONFIG_DM_SPI_FLASH
   CONFIG_ISO_PARTITION
   CONFIG_OF_SEPARATE
   CONFIG_SPI_FLASH_WINBOND
   CONFIG_SPL_ETH
   CONFIG_TIMER
   CONFIG_USB_DWC3
   CONFIG_USB_DWC3_GADGET
   CONFIG_USB_DWC3_OMAP
   CONFIG_USB_DWC3_PHY_OMAP
   CONFIG_USB_EHCI_TEGRA
   CONFIG_USB_GADGET_DOWNLOAD
   CONFIG_USB_GADGET_DUALSPEED
   CONFIG_USB_GADGET_MANUFACTURER
   CONFIG_USB_GADGET_PRODUCT_NUM
   CONFIG_USB_GADGET_VBUS_DRAW
   CONFIG_USB_GADGET_VENDOR_NUM

This catches a number of cases where board config files were #undef
various CONFIG options when building SPL, and that doesn't work.  Clean
up the related comments as well.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:45 -04:00
Tim Harvey
52ae8d6cc8 board: gateworks: venice: determine dram size at runtime
The SPL does not update the memory node with the dram size from EEPROM
but instead we can use get_ram_size which does a simple memory test
to determine the available RAM. Update PHYS_SDRAM_SIZE to 4GiB as that
is the max used on the Venice boards.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-03-31 08:27:52 -04:00
Marek Vasut
25cff0c1fa arm: socfpga: vining: Fix mtdparts for 2x256 MiB SF variant
The 2x256 MiB SF variant of this system has 192 MiB rootfs MTD partition
containing UBI on SF0, use the correct size in U-Boot environment, else
U-Boot cannot mount UBI and boot on this variant.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Siew Chin Lim <elly.siew.chin.lim@intel.com>
Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Cc: Tien Fong Chee <tien.fong.chee@intel.com>
Cc: Tom Rini <trini@konsulko.com>
2022-03-28 21:49:03 +02:00
Simon Glass
2cbc1c019b video: Convert CONFIG_VIDEO_BCM2835 to Kconfig
This converts the following to Kconfig:
   CONFIG_VIDEO_BCM2835

This is the final ad-hoc CONFIG_VIDEO_... to convert.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Matthias Brugger <mbrugger@suse.com>
2022-03-28 20:28:56 +02:00
Simon Glass
92e3fb8b5e video: Drop FSL DIU driver
This does not use driver model and is more than two years past the
migration date. Drop it.

It can be added back later if needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-28 20:18:16 +02:00
Simon Glass
77f46f0607 video: fsl: colibri_vf: Drop FSL DCU driver
This does not use driver model and is more than two years past the
migration date. Drop it.

It can be added back later if needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-28 20:18:07 +02:00
Simon Glass
1fa43cad86 video: Drop references to CONFIG_VIDEO et al
Drop the Kconfigs which are not used and all references to them. In
particular, this drops CONFIG_VIDEO to avoid confusion and allow us to
eventually rename CONFIG_DM_VIDEO to CONFIG_VIDEO.

Also drop the prototype for video_get_info_str() which is no-longer used.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Jason Liu <jason.hui.liu@nxp.com>
2022-03-28 20:17:07 +02:00
Simon Glass
82975f8a9e video: Drop CONFIG_VIDEO_BMP_LOGO
This option is not implemented anymore. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-28 20:16:56 +02:00
Tom Rini
34d2b7f203 Prepare v2022.04-rc5
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAmJBxXQACgkQFHw5/5Y0
 tywKKAv+L+sCmqfJ4Zy2cdzWkGZI3NZMWi8yzUUU37RH5I+3Blht+z6dMslm9gCB
 7/PwS5y7WH3l3wEdeXcw4FUCgNh3D8YyfCcVCsQ0Qxig49xwWz8Jn6t+haOWD6eW
 uXim+gSG+ceWTBrKf3InzXN5fHPIcF66r+k3opwAwIYKpT8p8CgM4ewshBCAsc6t
 6qSLf+A64JNv/y2DTS+sPDY68tnplbyRvrNb6YEazOF6b6SnSE2j+EH8RkIZ+2yT
 cTUhQ2o9JJIKnaG9MTqHB+XVe80oPB7bTWInFo2JxGn98XeS7CTCcnDZhLqWrvHF
 gBfcpEcVE2blVbg/Vo2x4rnU1dop44ch6pE9k5SPFJcPdlzdwFHHgGyfGi9LtD4K
 JAvaIQdz6ZEOQqShpCxcbL/g2/uoRaXFqC7E8IE+WdFMXGBQoZpqaoBMoefnyplk
 xrzqaQye38JgZDX0ku4cm4SMArAfr4sVHcdDlSlzY3y2KQ8Ead25irRvq7GoQ2Ad
 Odo9taQF
 =9g2Y
 -----END PGP SIGNATURE-----

Merge tag 'v2022.04-rc5' into next

Prepare v2022.04-rc5
2022-03-28 12:36:49 -04:00
Tom Rini
b40d2b2891 Convert CONFIG_BACKSIDE_L2_CACHE to Kconfig
This converts the following to Kconfig:
   CONFIG_BACKSIDE_L2_CACHE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25 12:01:15 +00:00
Tom Rini
2665853a5f vinco: Remove CONFIG_ATMEL_SPI0
This is not referenced anywhere, remove.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25 12:01:15 +00:00
Tom Rini
61b9c42e8c lcd: Remove LCD_TEST_PATTERN code
This is a legacy driver and the value is set in board config headers
without a CONFIG prefix.  Remove the code.

Cc: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25 12:01:15 +00:00
Tom Rini
3e2ea3278e Convert CONFIG_LCD_INFO et al to Kconfig
This converts the following to Kconfig:
   CONFIG_LCD_INFO
   CONFIG_LCD_LOGO
   CONFIG_LCD_INFO_BELOW_LOGO
   CONFIG_LCD_IN_PSRAM

Cc: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25 12:01:15 +00:00
Tom Rini
286c4531ad Convert CONFIG_ATMEL_LCD et al to Kconfig
This converts the following to Kconfig:
   CONFIG_ATMEL_LCD
   CONFIG_ATMEL_LCD_BGR555
   CONFIG_ATMEL_LCD_RGB565
   CONFIG_GURNARD_SPLASH

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25 12:01:15 +00:00
Tom Rini
cc386f161c Convert CONFIG_MII_INIT to Kconfig
This converts the following to Kconfig:
   CONFIG_MII_INIT

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25 12:01:15 +00:00
Tom Rini
16199a8b96 Convert CONFIG_PHY_RESET_DELAY to Kconfig
This converts the following to Kconfig:
   CONFIG_PHY_RESET_DELAY

Cc: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25 12:01:15 +00:00
Tom Rini
0b956e3987 Convert CONFIG_SYS_RX_ETH_BUFFER to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_RX_ETH_BUFFER

Cc: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25 12:01:15 +00:00
Tom Rini
6329dda175 Convert CONFIG_LPC32XX_ETH to Kconfig
This converts the following to Kconfig:
   CONFIG_LPC32XX_ETH

Cc: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25 12:01:15 +00:00
Tom Rini
5842c8107d Convert CONFIG_TFTP_PORT to Kconfig
This converts the following to Kconfig:
   CONFIG_TFTP_PORT

Cc: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25 12:01:15 +00:00
Tom Rini
03d14ccdf6 Convert CONFIG_RMII to Kconfig
This converts the following to Kconfig:
   CONFIG_RMII

Cc: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25 12:01:15 +00:00
Tom Rini
1d5686acfd Convert CONFIG_SYS_FAULT_ECHO_LINK_DOWN to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_FAULT_ECHO_LINK_DOWN

Cc: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25 12:01:15 +00:00
Tom Rini
29cc2b542d Convert CONFIG_RESET_PHY_R to Kconfig
This converts the following to Kconfig:
   CONFIG_RESET_PHY_R

Cc: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25 12:01:15 +00:00
Tom Rini
5a606a4c97 Convert CONFIG_AT91_WANTS_COMMON_PHY to Kconfig
This converts the following to Kconfig:
   CONFIG_AT91_WANTS_COMMON_PHY

Cc: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25 12:01:15 +00:00
Tom Rini
210a4b46bd Convert CONFIG_AT91_LED to Kconfig
This converts the following to Kconfig:
   CONFIG_AT91_LED

Cc: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25 12:01:15 +00:00
Tom Rini
cb81640011 Convert CONFIG_ATMEL_LEGACY to Kconfig
This converts the following to Kconfig:
   CONFIG_ATMEL_LEGACY

Cc: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18 12:48:18 -04:00
Tom Rini
5644f3b19d Convert CONFIG_AT91_GPIO_PULLUP to Kconfig
This converts the following to Kconfig:
   CONFIG_AT91_GPIO_PULLUP

Cc: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18 12:48:18 -04:00
Tom Rini
b601906ed5 atmel: Remove CONFIG_AT91SAM9G45_LCD_BASE
This variable is used once and is noted as board-specific.  Use the
value directly with a comment.

Cc: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18 12:48:17 -04:00
Tom Rini
137b990bf5 atmel: Remove CONFIG_AT91SAM9G45EKES
This symbol is used only once, and in comparison with an unset symbol,
so drop it.

Cc: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18 12:48:17 -04:00
Tom Rini
de0bb2ba54 Convert CONFIG_AT91SAM9G10EK et al to Kconfig
This converts the following to Kconfig:
   CONFIG_AT91SAM9G10EK
   CONFIG_AT91SAM9261EK
   CONFIG_AT91SAM9G10

Cc: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18 12:48:17 -04:00
Tom Rini
23cf6344c0 Convert CONFIG_AT91SAM9G20EK et al to Kconfig
This converts the following to Kconfig:
   CONFIG_AT91SAM9G20EK
   CONFIG_AT91SAM9260EK
   CONFIG_AT91SAM9G20EK_2MMC

Cc: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18 12:48:17 -04:00
Tom Rini
ae3f467e84 Convert CONFIG_AM335X_USB0 et al to Kconfig
This converts the following to Kconfig:
   CONFIG_AM335X_USB0
   CONFIG_AM335X_USB0_MODE
   CONFIG_AM335X_USB1
   CONFIG_AM335X_USB1_MODE

We do this by introducing specific options for static configuration of
USB0/USB1 in SPL rather than defining CONFIG_AM335X_USBx_MODE to the
enum value being used.  Furthermore, with how the code is used now we do
not need to have OTG mode exposed as an option here, so remove that.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18 12:48:17 -04:00
Tom Rini
08f1d58aff net: fec_mxc: Drop CONFIG_FEC_XCV_TYPE
With all boards now using DM_ETH we determine the value for
CONFIG_FEC_XCV_TYPE at run time, except in the case of the default
fall-back.  Set the fallback directly now.

Cc: Fabio Estevam <festevam@gmail.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18 12:48:17 -04:00
Tom Rini
0e14cdfaf3 Convert CONFIG_ETHPRIME to Kconfig
This converts the following to Kconfig:
   CONFIG_ETHPRIME

This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME
similar to other options that are not always set and control environment
variables.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18 12:48:17 -04:00
Tom Rini
5d6a64f71d Remove CONFIG_HAS_ETH0 et al symbols
This converts removes the following symbols:
   CONFIG_HAS_ETH0
   CONFIG_HAS_ETH1
   CONFIG_HAS_ETH2
   CONFIG_HAS_ETH3

This is because at this point, only the ids8313 platform was using the
code which was controlled by these symbols.  In turn, this code already
performs error checking on being able to perform the device tree fixup.
Rather than convert these to Kconfig for a single platform, update the
code to not need these checks and remove them from all the platforms
they were unused on.

Reviewed-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18 12:48:17 -04:00
Tom Rini
eeda762af3 Convert CONFIG_NFS_TIMEOUT to Kconfig
This converts the following to Kconfig:
   CONFIG_NFS_TIMEOUT

Cc: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18 12:48:17 -04:00
Tom Rini
69c8a817cf Convert CONFIG_BOOT_RETRY_TIME et al to Kconfig
This converts the following to Kconfig:
   CONFIG_BOOT_RETRY_TIME
   CONFIG_BOOT_RETRY_MIN
   CONFIG_RESET_TO_RETRY

We also introduce CONFIG_BOOT_RETRY to gate these options, and clean up
the associated Makefile entry and C code for picking default values of
CONFIG_BOOT_RETRY_MIN.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18 12:48:17 -04:00
Tom Rini
01d1b99c9b Convert CONFIG_NET_RETRY_COUNT to Kconfig
This converts the following to Kconfig:
   CONFIG_NET_RETRY_COUNT

Cc: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18 12:48:17 -04:00
Tom Rini
5d4e863bf8 Convert CONFIG_ARP_TIMEOUT to Kconfig
This converts the following to Kconfig:
   CONFIG_ARP_TIMEOUT

Cc: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18 12:48:17 -04:00
Tom Rini
5f7c886c82 Convert CONFIG_A008044_WORKAROUND to Kconfig
This converts the following to Kconfig:
   CONFIG_A008044_WORKAROUND

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18 12:48:17 -04:00
Tom Rini
fdd0da4ca4 Convert CONFIG_A003399_NOR_WORKAROUND to Kconfig
This converts the following to Kconfig:
   CONFIG_A003399_NOR_WORKAROUND

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18 12:48:17 -04:00
Tom Rini
b53a280b81 Convert CONFIG_ARMV8_SWITCH_TO_EL1 to Kconfig
This converts the following to Kconfig:
   CONFIG_ARMV8_SWITCH_TO_EL1

Cc: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
Cc: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Cc: Tien Fong Chee <tien.fong.chee@intel.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
2022-03-18 12:48:17 -04:00
Tom Rini
0da35fa8d6 Convert CONFIG_ARMV7_SECURE_BASE et al to Kconfig
This converts the following to Kconfig:
   CONFIG_ARMV7_SECURE_BASE
   CONFIG_ARMV7_SECURE_MAX_SIZE
   CONFIG_ARMV7_SECURE_RESERVE_SIZE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18 08:43:25 -04:00
Tom Rini
eb8eb31749 configs: Re-run migrations
As the CI test for stopping platforms from being merged that were
defining symbols that had Kconfig entries, a small number of symbols
needed to be migrated again.  Do so, and catch two cases the README
should also have been updated but was not.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18 08:43:25 -04:00
Tom Rini
ab366418b5 Revert "efi: Allow easy selection of serial-only operation"
This commit re-introduced a migrated CONFIG symbol to the board header
file.  These changes should likely be handled via documentation instead,
as well.

Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-03-18 08:43:25 -04:00
Tom Rini
b3fe015893 sunxi: Do not define CONFIG_SPL_STACK_ADDR_R
We cannot define a CONFIG value here to ensure that the Kconfig value
isn't set wrong.

Fixes: 2c699fe0d3 ("configs: sunxi: Add common SUNIV header")
Cc: Icenowy Zheng <icenowy@aosc.io>
Cc: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18 08:43:24 -04:00
Alper Nebi Yasak
e4015661c3 rockchip: bob: Enable more configs
This patch enables some configs that should be working on the Bob board,
based on what is observed to work on the Kevin board.

The Bob board uses an Embedded DisplayPort panel compatible with the
simple panel and Rockchip eDP drivers. Its backlight is controlled by
the Chromium OS Embedded Controller Pulse Width Modulator. Enable these
for the board.

Also set VIDEO_ROCKCHIP_MAX_{XRES,YRES} to 1280x800, the resolution of
its panel. This had to be done for the Kevin board, but it's untested if
this is actually necessary for Bob.

The Rockchip video driver needs to assert/deassert some resets, so also
enable the reset controller. RESET_ROCKCHIP defaults to y for this board
when DM_RESET=y, so it's enough to set that.

The Bob board has two USB 3.0 Type-C ports and one USB 2.0 Type-A port
on its right side. Enable the configs relevant to USB devices so these
can be used. This is despite a known issue with RK3399 boards where USB
de-init causes a hang, as there is a known workaround.

Some other rk3399-based devices enable support for the SoC's random
number generator in commit a475bef534 ("configs: rk3399: enable rng on
firefly/rock960/rockpro64"), as it can provide a KASLR seed when booting
using UEFI. Enable it for Bob as well.

The default misc_init_r() for Rockchip boards sets cpuid and ethernet
MAC address based on e-fuse block. A previous patch extends this on Gru
boards to set registers related to SoC IO domains as is necessary on
these boards. Enable this function and configs for it on Bob.

The microSD card slot on this board (and others based on Gru) is
connected to a GPIO controlled regulator (ppvar-sd-card-io), which must
be operable by U-Boot. Enable the relevant config option to allow this.

Bob boards also use the Winbond W25Q64DW SPI flash chip, enable support
for Winbond SPI flash chips in the board config so U-Boot can boot with
this chip.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2022-03-18 18:12:03 +08:00
Tom Rini
469c1bc688 Merge https://source.denx.de/u-boot/custodians/u-boot-riscv
- k210 updates
2022-03-16 08:11:53 -04:00
Damien Le Moal
fd426b3106 k210: use the board vendor name rather than the marketing name
"kendryte" is the marketing name for the K210 RISC-V SoC produced by
Canaan Inc. Rather than "kendryte,k210", use the usual "canaan,k210"
vendor,SoC compatibility string format in the device tree files and
use the SoC name for file names.
With these changes, the device tree files are more in sync with the
Linux kernel DTS and drivers, making uboot device tree usable by the
kernel.

Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2022-03-15 17:43:11 +08:00
Tom Rini
2abf048ab7 Prepare v2022.04-rc4
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAmIvp/8ACgkQFHw5/5Y0
 tyyI6wwApR++p9BBlWEZn1B5sivCXcs9oCX3Vs8vegpiiRbs/pGsyKV6pfEHHYV5
 lhw1YNZ0accKmqBmX19tdpQ2ZzHq3+g0eGJL8xioXU3hRoZZNsDewAF8KS+aHPpk
 qMuA+xbDi08I6z2qtrIpaDd//DO2jAkFF+/TKOzSgUSxBaomQiziZaB2x28bIBH2
 zsLMP4vzZ03uCSZVSd7HMBz0qiGhioJo5Ch2eU4TTJW19CXeMTAuav6SDq+6vJGi
 cIUe31YEe742jOVmtf2RuJQ+mDjsEfT11wvRajcbOlH/Ho7E5iFxQkmOEThpvybE
 YD5d5uLLpQj42PfBpSvx4nMJcvyOmqxdizUJxCgi/q5HrhdzcO6LwLLON0T4W4zG
 Vsue+iTjOKXgLdD8g/VogL38iHxhpfY7zsFB98vvHcoLwhEXvfvhO8Dj/lwLw4Ic
 88B6uz3TqAPNqSnTWphJPCwG8STwyqlvLXwTF+eICbtQW3uuHEtnmlsXQJeFmdUa
 fGK8dUfr
 =wyE5
 -----END PGP SIGNATURE-----

Merge tag 'v2022.04-rc4' into next

Prepare v2022.04-rc4
2022-03-14 17:40:36 -04:00
weichangzheng
b9d0f00a9d arm: add initial support for the Phytium Pomelo Board
This adds platform code and the device tree for the Phytium Pomelo Board.
The initial support comprises the UART and the PCIE.

Signed-off-by: weichangzheng <nicholas_zheng@outlook.com>
2022-03-10 13:57:04 -05:00
Aswath Govindraju
a30dc99b55 include: configs: j721e_evm.h: Fix the env variable corresponding to QSGMII PHY init
QSGMII PHY initialization should only be done for J721E EVMs and not for
J721E-SK boards. Therefore, fix the environment variables accordingly.

Also, by default remote processors should not be booted in U-Boot but
rather be left to the users to enable this by setting dorprocboot.
Therefore, remove dorprocboot that is being set by default.

Fixes: 5980925e2a ("include: configs: j721e_evm: Add support to boot ethfw core in j721e")
Reported-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
2022-03-10 13:49:57 -05:00
Simon Glass
42fdcebf85 event: Convert misc_init_f() to use events
This hook can be implmented using events, for the three boards that
actually use it.

Add the event type and event handlers. Drop CONFIG_MISC_INIT_F since we
can just use CONFIG_EVENT to control this. Since sandbox always enables
CONFIG_EVENT, we can drop the defconfig lines there too.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-10 08:28:36 -05:00
Pali Rohár
d6213e206c Nokia RX-51: Convert to CONFIG_DM_VIDEO
Mechanically convert video_hw_init() function to UCLASS_VIDEO probe
callback and replace CONFIG_CFB_CONSOLE by CONFIG_DM_VIDEO.

As framebuffer base address is setup by the bootloader which loads U-Boot,
set plat->base to that fixed framebuffer address.

This change was tested in qemu n900 machine and is working fine.

What does not work is CONFIG_VIDEO_LOGO, seems to be buggy.

Signed-off-by: Pali Rohár <pali@kernel.org>
2022-03-09 21:28:53 +01:00
Philippe Reynes
a241ccdc44 bcm96753ref: add initial support
This add the initial support of the broadcom reference
board bcm96753ref with a bcm6753 SoC.

This board has 1 GB of RAM, 256 MB of flash (nand),
2 USB port, 1 UART, and 4 ethernet ports.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-03-07 11:36:12 -05:00
Romain Naour
4ff9a8c33c configs: ti: use standard configuration nodes naming
Currently, any u-boot bootloader for ti armv7 platforms using
DEFAULT_FIT_TI_ARGS to boot with a fitimage (boot_fit = 1)
doesn't boot when built with Yocto Poky (openembedded-core).

  ## Loading kernel from FIT Image at 90000000 ...
  Could not find configuration node
  ERROR: can't get kernel image!

Arago forked the kernel-fitimage class [1] and altered the
configuration nodes naming while adding the OPTEE support by
using FITIMAGE_CONF_BY_NAME by default [2].

The "upstream" kernel-fitimage class from openembedded-core still
add the "conf-" prefix for each configuration nodes [3].

The ITS file format (from doc/uImage.FIT/source_file_format.txt)
is not really accurate with the expected naming of these nodes.
But in practice the "conf-" prefix is widely used.

When the FIT image support has been added for ti armv7 platforms
the naming from Arago has been used [3]. Fix this issue by adding
the prefix expected by the ITS file generated by kernel-fitimage
class from openembedded-core.

[1] http://arago-project.org/git/meta-arago.git?p=meta-arago.git;a=commitdiff;h=719ab1b2098bcdc59c249e3529fa82cb1b9130e6
[2] http://arago-project.org/git/meta-arago.git?p=meta-arago.git;a=commitdiff;h=f23f2876a0cda89241d031bb7ba0b4256ed90035
[3] https://git.openembedded.org/openembedded-core/tree/meta/classes/kernel-fitimage.bbclass?h=yocto-3.1.13#n290
[3] 1e93cc8473

Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Tom Rini <trini@konsulko.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
2022-03-04 15:20:06 -05:00
Tom Rini
f9147d636c Convert CONFIG_CHIP_SELECTS_PER_CTRL to Kconfig
This converts the following to Kconfig:
   CONFIG_CHIP_SELECTS_PER_CTRL

Cc: Alison Wang <alison.wang@nxp.com>
Cc: Pramod Kumar <pramod.kumar_1@nxp.com>
Cc: Priyanka Jain <priyanka.jain@nxp.com>
Cc: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Cc: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-03 16:51:20 -05:00
Tom Rini
819b4778d6 Convert CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS to Kconfig
This converts the following to Kconfig:
   CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-03 16:51:20 -05:00
Tom Rini
a542e4307d Convert CONFIG_BOOTP_MAY_FAIL et al to Kconfig
This converts the following to Kconfig:
   CONFIG_BOOTP_MAY_FAIL
   CONFIG_BOOTP_VENDOREX
   CONFIG_BOOTP_BOOTFILESIZE
   CONFIG_BOOTP_NISDOMAIN
   CONFIG_BOOTP_TIMEOFFSET

Cc: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-03 16:51:20 -05:00
Tom Rini
028aa0946f powerpc: P1010RDB: Move CONFIG_BOOTMODE out of CONFIG namespace
This slight environment modification shouldn't be in the CONFIG
namespace, change it.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-03 16:51:20 -05:00
Tom Rini
fdfb17b1f5 Convert CONFIG_BOOTFILE to Kconfig
This converts the following to Kconfig:
   CONFIG_BOOTFILE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-03 16:51:20 -05:00
Tom Rini
6d21dd313b Convert CONFIG_BOARD_POSTCLK_INIT to Kconfig
This converts the following to Kconfig:
   CONFIG_BOARD_POSTCLK_INIT

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-03 16:51:19 -05:00
Tom Rini
da8592d5fa Convert CONFIG_BOARD_ECC_SUPPORT to Kconfig
This converts the following to Kconfig:
   CONFIG_BOARD_ECC_SUPPORT

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-03 16:51:19 -05:00
Tom Rini
2c58d2fccf Convert CONFIG_BIOSEMU to Kconfig
This converts the following to Kconfig:
   CONFIG_BIOSEMU

Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-03 16:51:19 -05:00
Tom Rini
a7e6c6b1be Convert CONFIG_BOARD_COMMON to Kconfig
This converts the following to Kconfig:
   CONFIG_BOARD_COMMON

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-03 16:51:19 -05:00
Tom Rini
43ea564652 arm: exynos: Move BL1/2 SPI flash defines to their user, drop CONFIG
These particular values are not configurable and today we always set
CONFIG_SECURE_BL1_ONLY.  Move these to where they're used in the code,
and drop from the CONFIG namespace.

Cc: Minkyu Kang <mk7.kang@samsung.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
2022-03-03 16:51:19 -05:00
Tom Rini
a3041d934f Convert CONFIG_BTB to Kconfig
This converts the following to Kconfig:
   CONFIG_BTB

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-03 16:51:19 -05:00
Tom Rini
3db7b2bb4c powerpc: Remove unused MPC8540/60ADS code
Remove some code, primarily CPM2 related, that is now unused since the
removal of MPC8540/60ADS.

Fixes 3913191c8a ("powerpc: mpc8540ads: mpc8560ads: Drop support for MPC8540/60ADS")
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-03-03 16:51:19 -05:00
Tom Rini
705b5840cd Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq
Update and fixes for sl28, lx2, pblimage generation for some powerpc
products
2022-03-03 08:24:13 -05:00
Janne Grunau
6fb4f7387e arm: apple: Switch to fully dynamic mem layout
Support for Apple M1 Pro and Max will allow using a single binary for
all M1 SoCs. The M1 Pro/Max have a different memory layout. The RAM
start address is 0x100_0000_0000 instead of 0x8_0000_0000.
Replace the hardcoded memory layout with dynamic initialized
environment variables in board_late_init().

Tested on Mac Mini (2020) and Macbook Pro 14-inch (2021).

Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
2022-02-28 10:33:45 -05:00
Daniel Klauer
453db60568 lx2160a: Fix distroboot device list for configs without USB/SCSI/etc
The BOOT_TARGET_DEVICES list for distro_bootcmd was hard-coded to assume
that all boot devices are available/enabled in the configuration,
thus ignoring the actual config settings. The config_distro_bootcmd.h
header file specifically has compile-time checks to detect such problems.

To allow disabling USB, SCSI, etc. in custom lx2160a board configs,
make it depend on the config settings and use only the enabled features.

Signed-off-by: Daniel Klauer <daniel.klauer@gin.de>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-28 12:01:02 +05:30
Tom Rini
24b628a8f8 Xilinx changes for v2022.04-rc3
microblaze:
 - Fix exception handler
 
 zynqmp:
 - Show information about secure images
 - DT changes (som u-boot file removal)
 - Fix zynqmp_pm_cfg_obj_convert.py
 - Fix platform boot
 
 xilinx:
 - Fix bootm_size calculation
 - Remove GPIO_EXTRA_HEADER selection
 
 power:
 - Add zynqmp power management driver
 
 scsi:
 - Add phy support to ceva driver
 
 zynq qspi:
 - Fix unaligned accesses and check baudrate setup
 - Add support for spi memory operations
 
 net:
 - Fix 64bit calculation in axi_emac
 
 video:
 - Add missing gpio dependency for seps driver
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCYhOKGwAKCRDKSWXLKUoM
 IQP/AJ9U6inecbFh6LWchwX1ByhHVB0NuQCeLExfpcscdJlVUtNBC8kaRrrdjVM=
 =nq1B
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2022.04-rc3' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx changes for v2022.04-rc3

microblaze:
- Fix exception handler

zynqmp:
- Show information about secure images
- DT changes (som u-boot file removal)
- Fix zynqmp_pm_cfg_obj_convert.py
- Fix platform boot

xilinx:
- Fix bootm_size calculation
- Remove GPIO_EXTRA_HEADER selection

power:
- Add zynqmp power management driver

scsi:
- Add phy support to ceva driver

zynq qspi:
- Fix unaligned accesses and check baudrate setup
- Add support for spi memory operations

net:
- Fix 64bit calculation in axi_emac

video:
- Add missing gpio dependency for seps driver
2022-02-21 08:32:02 -05:00
Heiko Thiery
891a32465d kontron-sl-mx8mm: change environment address variables
Currently the space between kernel_addr_r and the fdt_addr_r is only 32MB.
To have enought space to load kernel images bigger than 32MB change the
variables to a feasible value.

The new environment variables layout is based on the scheme from
"include/configs/ti_armv7_common.h".

The CONFIG_SYS_LOAD_ADDR value is set to 0x42000000. With that we have
the same value as for the kernel_addr_r.

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Reviewed-by: Michael Walle <michael@walle.cc>
2022-02-19 23:32:23 +01:00
Francesco Dolcini
a1128944a1 colibri-imx6ull: improve env badblock management
Use the complete 512kb (4 blocks) nand partition reserved for u-boot
environment instead of just the first block, this allows the module to
have a working environment even if 3 blocks are bad.

Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-02-19 23:32:22 +01:00
Tim Harvey
10673ebb1f board: gateworks: venice: config file cleanups
Clean up config file:
 - remove unnecessary IMX_FEC_BASE
 - remove unnecessary comment
 - remove ipaddr/serverip from env

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-19 14:46:54 +01:00
Tim Harvey
2cb156e126 board: gateworks: venice: add imx8mn-gw7902 support
The GW7902 is based on the i.MX 8M Mini / Nano SoC featuring:
 - LPDDR4 DRAM
 - eMMC FLASH
 - Gateworks System Controller
 - LTE CAT M1 modem
 - USB 2.0 HUB
 - M.2 Socket with USB2.0, PCIe, and dual-SIM
 - IMX8M FEC
 - PCIe based GbE
 - RS232/RS485/RS422 serial transceiver
 - GPS
 - CAN bus
 - WiFi / Bluetooth
 - MIPI header (DSI/CSI/GPIO/PWM/I2S)
 - PMIC

To add support for the i.MX8M Nano GW7902:
 - Add imx8mn-venice dts/defconfig/include
 - Add imx8mn-gw7902 dts
 - Add imx8mn-2gb lpddr4 dram configs
 - Add misc support for IMX8M Nano SoC
 - rename imx8mm-venice.c to venice.c as it is no longer imx8mm specific
 - update README with differences for IMX8MN vs IMX8MM

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-19 14:46:54 +01:00
Ying-Chun Liu (PaulLiu)
ddb56f371a arm: imx8m: add support for Advantech RSB-3720
Add initial support for Advantech RSB-3720 board.
The initial support includes:
 - MMC
 - eMMC
 - I2C
 - FEC
 - Serial console

Signed-off-by: Darren Huang <darren.huang@advantech.com.tw>
Signed-off-by: Kevin12.Chen <Kevin12.Chen@advantech.com.tw>
Signed-off-by: Phill.Liu <Phill.Liu@advantech.com.tw>
Signed-off-by: Tim Liang <tim.liang@advantech.com.tw>
Signed-off-by: wei.zeng <wei.zeng@advantech.com.cn>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
Cc: uboot-imx <uboot-imx@nxp.com>
Cc: Peng Fan (OSS) <peng.fan@oss.nxp.com>
2022-02-19 14:46:54 +01:00
Sinthu Raja
0ca9f70423 include: configs: Update env for selecting right dtb
Now that single defconfig can be used for booting J721E EVM and
SK, default device tree will not work for selecting dtb for
kernel. Update the findfdt env to select right dtb based on
board_name env variable.

Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-16 14:19:30 -05:00
Ovidiu Panait
1669b3d1a0 microblaze: exception: migrate MICROBLAZE_V5 to Kconfig
Also, rename it to XILINX_MICROBLAZE0_DELAY_SLOT_EXCEP, since it only
covers delay slot exception support.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Link: https://lore.kernel.org/r/20220213080925.1548411-2-ovidiu.panait@windriver.com
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2022-02-15 13:11:43 +01:00
Ovidiu Panait
1ca890d789 common: drop CONFIG_SYS_RESET_ADDR
There are no boards that define CONFIG_SYS_RESET_ADDR, so drop the
remaining comments referencing it and also the config_whitelist.txt entry.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Acked-by: thomas@wytron.com.tw
2022-02-10 16:44:23 -05:00
Mark Kettenis
d42f107425 input: apple: Add support for Apple SPI keyboard
This driver adds support for the keyboard on Apple Silicon laptops.
The controller for this keyboard sits on an SPI bus and uses an
Apple-specific HID over SPI protocol. The packets sent by this
controller for key presses and key releases are fairly simple and
are decoded directly by the code in this driver and converted into
standard Linux keycodes. The same controller handles the touchpad
found on these laptops.  Packets for touchpad events are simply
ignored.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested on: Macbook Air M1
Tested-by: Simon Glass <sjg@chromium.org>
2022-02-10 16:44:23 -05:00
Mark Kettenis
dbb273a5b6 configs: apple: Add NVMe boot target
Add a boot target for NVMe such that we can boot from NVMe.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
2022-02-10 16:44:23 -05:00
Tony Dinh
d2a44ceddc arm: kirkwood: Pogoplug E02 : Convert Ethernet to Driver Model
The Pogoplug E02 board has the network chip Marvell 88E1116R. Convert
to Driver Model and use uclass mvgbe and the compatible driver M88E1118R
to bring up Ethernet.

- Add board_eth_init(), CONFIG_DM_ETH, and CONFIG_PHY_MARVELL
to bring up Ethernet.
- Currently, CONFIG_RESET_PHY_R symbol is used in
arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood
boards with mv8831116 PHY, with each board defines the function
reset_phy(). Undefine it for this board.
- As the result of the migration to Driver Model, this u-boot image has
grown substantially (about 100K, give or take). The old envs location
at 0x60000 (384k) is no longer possible. Move it to 0xC0000 (768K).
- Miscellaneous changes: Move constants to .c file and remove header file
board/cloudengines/pogo_e02/pogo_e02.h, use CONFIG_SYS_THUMB_BUILD to
keep u-boot image under 512K, use BIT macro, and cleanup comments.

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-02-10 07:12:16 +01:00
Tony Dinh
c153576d8d arm: kirkwood: Dockstar : Add DM Ethernet
The Dockstar board has the network chip Marvell 88E1116R. Convert to
Ethernet driver model, and use uclass mvgbe and the compatible driver
M88E1118R to bring up Ethernet.

- Add CONFIG_DM_ETH and associated configs.
- Add board_eth_init() to use uclass mvgbe to bring up the network.
And remove ad-hoc code.
- Add CONFIG_PHY_MARVELL to properly configure the network.
- Currently, CONFIG_RESET_PHY_R symbol is used in
arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood
boards with mv8831116 PHY, with each board defines the function
reset_phy(). Undefine it for this board.
- Miscellaneous changes: Move constants to .c file and remove
header file board/Seagate/dockstar/dockstar.h, use
CONFIG_SYS_THUMB_BUILD to keep u-boot image
under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments.

- Note: This patch is a RESEND for a previous patch:
https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-02-10 07:12:16 +01:00
Tony Dinh
f99a169c19 arm: kirkwood: iConnect : Add Ethernet support
- Currently, CONFIG_RESET_PHY_R symbol is used in
arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood
boards with mv8831116 PHY, with each board defines the function
reset_phy(). Undefine it for this board.
- Add board_eth_init(), CONFIG_DM_ETH, and CONFIG_PHY_MARVELL
to bring up Ethernet.
- Miscellaneous changes: Move constants to .c file and remove header file
board/iomega/iconnect/iconnect.h. Add CONFIG_HUSH_PARSER, use BIT macro,
and cleanup comments.

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-02-10 07:12:16 +01:00
Tony Dinh
fb9ed23c22 arm: kirkwood: Dreamplug : Use Marvell uclass mvgbe and PHY driver for Ethernet
The Globalscale Technologies Dreamplug board has the network chip
Marvell 88E1116R. Use uclass mvgbe and the compatible driver M88E1310
driver to bring up Ethernet.

- Currently, CONFIG_RESET_PHY_R symbol is used in
arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood
boards with mv8831116 PHY, with each board defines the function
reset_phy(). Undefine it for this board.
- Add board_eth_init() to use uclass mvgbe to bring up both network
port 0 and 1. And remove ad-hoc code.
- Enable CONFIG_PHY_MARVELL to properly configure the network.
- Add myself as maintainer (this board seems to be orphaned,
could not contact Jason Cooper using current email).
- Miscellaneous changes: Move constants to .c file and remove header file
board/Marvell/dreamplug/dreamplug.h, cleanup comments.

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Pali Rohár <pali@kernel.org>
2022-02-10 07:12:16 +01:00
Simon Glass
edca8cf721 Convert CONFIG_SCSI_AHCI_PLAT et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SCSI_AHCI_PLAT
   CONFIG_SYS_SCSI_MAX_SCSI_ID
   CONFIG_SYS_SCSI_MAX_LUN
   CONFIG_SYS_SATA_MAX_DEVICE

Drop CONFIG_SCSI for everything except the sandbox build. We only need
one build for tests.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-02-09 09:16:48 -05:00
Simon Glass
ce30e3ff1e scsi: Drop CONFIG_SYS_SCSI_MAX_DEVICE
This is defined based on two other CONFIGs for all boards except sandbox
and durian.

For sandbox the value does not matter. For durian the value seems
excessive.

Drop the option completely, to simplify configuration and reduce the
number of things we need to convert to Kconfig.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-02-09 09:16:48 -05:00
Alper Nebi Yasak
a8c281d4b7 Convert CONFIG_REMAKE_ELF to Kconfig
This converts the following to Kconfig:
   CONFIG_REMAKE_ELF

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-02-09 09:16:47 -05:00
Simon Glass
4b4b1de85d Drop CONFIG_SYS_PIO_MODE
This option is not used in U-Boot. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-02-09 09:16:47 -05:00
Simon Glass
d2da54bfc4 Convert CONFIG_SYS_IDE_MAXBUS et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_IDE_MAXBUS
   CONFIG_SYS_IDE_MAXDEVICE
   CONFIG_SYS_ATA_BASE_ADDR
   CONFIG_SYS_ATA_STRIDE
   CONFIG_SYS_ATA_DATA_OFFSET
   CONFIG_SYS_ATA_REG_OFFSET
   CONFIG_SYS_ATA_ALT_OFFSET
   CONFIG_SYS_ATA_IDE0_OFFSET
   CONFIG_SYS_ATA_IDE1_OFFSET
   CONFIG_ATAPI
   CONFIG_IDE_RESET

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-02-09 09:16:47 -05:00
Pali Rohár
f55d4978e1 Nokia RX-51: Convert to CONFIG_DM_KEYBOARD
Signed-off-by: Pali Rohár <pali@kernel.org>
2022-02-08 11:00:04 -05:00
Aswath Govindraju
5980925e2a include: configs: j721e_evm: Add support to boot ethfw core in j721e
Add configs to enable booting ethfw core in j721e

Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
2022-02-08 11:00:04 -05:00
David Huang
681023aba4 arm: K3: Add basic support for J721S2 SoC definition
Add basic support for J721S2 SoC definition

Signed-off-by: David Huang <d-huang@ti.com>
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
2022-02-08 09:41:26 -05:00
Oleksandr Suvorov
530780a69c apalis/colibri_imx6: move setting bootcmd to defconfig
Move setting the default boot command to the
apalis/colibri_imx6_defconfig. It allows replacing the command
without code modification.

Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@foundries.io>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-02-07 16:33:23 +01:00
Marcel Ziswiler
2bc2f817ce board: toradex: add verdin imx8m plus support
This adds initial support for the Toradex Verdin iMX8M Plus Quad 4GB WB
IT V1.0B module. They are strapped to boot from eFuses which are factory
fused to properly boot from their on-module eMMC. U-Boot supports
booting from the on-module eMMC only, SDP support is disabled for now
due to missing i.MX 8M Plus USB support.

Functionality wise the following is known to be working:
- eMMC, 8-bit and 4-bit MMC/SD card slots
- Ethernet both on-module eQoS and FEC (requires PHY on carrier board)
- GPIOs
- I2C

Boot sequence is:
SPL ---> ATF (TF-A) ---> U-boot proper

ATF, U-boot proper and u-boot.dtb images are packed into a FIT image,
loaded by SPL.

Boot:
U-Boot SPL 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100)
Quad die, dual rank failed, attempting dual die, single rank configuration.
Normal Boot
WDT:   Started watchdog@30280000 with servicing (60s timeout)
Trying to boot from BOOTROM
Find img info 0x&48025a00, size 872
Need continue download 1024
Download 779264, Total size 780424
NOTICE:  BL31: v2.2(release):rel_imx_5.4.70_2.3.2_rc1-5-g835a8f67b
NOTICE:  BL31: Built : 16:52:37, Aug 26 2021

U-Boot 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100)

CPU:   Freescale i.MX8MP[8] rev1.1 at 1200 MHz
Reset cause: POR
DRAM:  8 GiB
Core:  78 devices, 18 uclasses, devicetree: separate
WDT:   Started watchdog@30280000 with servicing (60s timeout)
MMC:   FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... OK
In:    serial
Out:   serial
Err:   serial
Model: Toradex Verdin iMX8M Plus Quad 4GB Wi-Fi / BT IT V1.0B, Serial# 06817281
Carrier: Toradex Verdin Development Board V1.1A, Serial# 10807609
Setting variant to wifi
Net:   Hard-coding pdata->enetaddr
eth1: ethernet@30be0000, eth0: ethernet@30bf0000 [PRIME]
Hit any key to stop autoboot:  0
Verdin iMX8MP #

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-07 16:33:22 +01:00
Marek Vasut
2b8e304b93 ARM: imx6: dh-imx6: Add update_sf script to install U-Boot into SF
Add script to read U-Boot from SD card and write it to matching
locations in the SPI NOR, thus making the SPI NOR bootable.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Stefano Babic <sbabic@denx.de>
Acked-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-05 15:49:02 +01:00
Heiko Thiery
16c7369ede board: kontron: pitx-imx8m: Add Kontron pitx-imx8m board support
The Kontron pitx-imx8m is an NXP i.MX8MQ based board in the pITX form factor.

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
2022-02-05 15:49:02 +01:00
Oliver Graute
8f55003c58 imx: imx8qm_rm7720: adjust fdt_addr
The Linux Kernel Image size for arm64 is still growing.
A Kernel with 54 MB at load address 0x80280000 overlaps
with fdt_addr at 0x83000000. So let's increase it to 0x84000000

Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
2022-02-05 15:49:01 +01:00
Oliver Graute
a7e22ec90e imx: imx8qm_rom7720: Increase CONFIG_SYS_BOOTM_LEN to 64MB
Increase CONFIG_SYS_BOOTM_LEN to 64MB

Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
2022-02-05 15:49:01 +01:00
Andrey Zhizhikin
8c34cdc735 imx: ventana: correct splashimage load address
Commit 72d81360aa ("global: Convert CONFIG_LOADADDR to
CONFIG_SYS_LOADADDR") dropped the usage of LOADADDR and replaced it with
SYS_LOADADDR.

Use the correct macro in environment by replacing CONFIG_LOADADDR with
CONFIG_SYS_LOADADDR.

Fixes: d75ebf3482 ("imx: ventana: fix splash logo drawing")
Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
Cc: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Acked-By: Tim Harvey <tharvey@gateworks.com>
2022-02-05 15:49:01 +01:00
Andrey Zhizhikin
efaf9a2b32 imx8mq_evk: configs: add/cleanup variables for distro boot
Add fdt_addr_r fdtfile which used by distro boot, and cleanup legacy
environment variables.

Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
2022-02-05 15:49:01 +01:00
Ying-Chun Liu (PaulLiu)
f8a5cda5ec configs: imx8mm-cl-iot-gate: update dfu_alt_info for single flash.bin
We changed to single flash.bin now. So dfu_alt_info should be modified
to reflect this change.

Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-05 15:49:00 +01:00
Christoph Niedermaier
ca27227c59 ARM: dts: imx6q-dhcom: Use 1G ethernet on the PDK2 board
The PDK2 board is capable of running both 100M and 1G ethernet. However,
the i.MX6 has only one ethernet MAC, so it is possible to configure
either 100M or 1G Ethernet. In case of 100M option, the PHY is on the
SoM and the signals are routed to a RJ45 port. For 1G the PHY is on
the PDK2 board with another RJ45 port. 100M and 1G ethernet use
different signal pins from the i.MX6, but share the MDIO bus.

This SoM board combination is used to demonstrate how to enable 1G
ethernet configuration.

Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Stefano Babic <sbabic@denx.de>
2022-02-05 13:38:39 +01:00
Ariel D'Alessandro
c4c1ed68c1 imx8mn_var_som: Add support for Variscite VAR-SOM-MX8M-NANO board
Add support for iMX8MN VAR-SOM-MX8M-NANO board. Enables support for:

- 1GiB DDR4 RAM
- 16 GiB eMMC
- SD card
- Gigabit ethernet
- USBOTG1 peripheral - fastboot

Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-05 13:38:39 +01:00
Ricardo Salveti
8b71576f38 mx7ulp_com: add support for SPL
Add EA iMX7ULP COM board support for building SPL.

Signed-off-by: Ricardo Salveti <ricardo@foundries.io>
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
2022-02-05 13:38:38 +01:00
Francesco Dolcini
0c141103b4 colibri-imx7: improve env badblock management
Use the complete 512kb (4 blocks) nand partition reserved for u-boot
environment instead of just the first block, this allows the module
to have a working environment even if 3 blocks are bad.

Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
2022-02-05 13:38:38 +01:00
Icenowy Zheng
2c699fe0d3 configs: sunxi: Add common SUNIV header
Adds support for SUNIV and the F1C100s.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-02-04 00:09:57 +00:00
Andre Przywara
f2c33699d1 sunxi-common.h: remove pointless #ifdefs
Remove some pointless #ifdefs from this file, as there are quite too
many of them already.

Some definitions don't really hurt to have in any case, so remove the
pointless CONFIG_MMC guard around CONFIG_MMC_SUNXI_SLOT.

The BOARD_SIZE_LIMIT applies regardless of ARM64 or not (now), so remove
that guard as well. The maximum number of MMC devices does not depend on
CONFIG_ENV_IS_IN_MMC, so move that out to simplify the file.

Last but not least CONFIG_SPL_BOARD_LOAD_IMAGE serves no real purpose
anymore: it's unconditionally defined for all sunxi boards, and protects
nothing applicable outside of sunxi code anymore. Just remove it.

Reviewed-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-02-04 00:09:57 +00:00
Aleksandar Gerasimovski
84f1052800 km/ls102xa: add support for field fail-safe u-boot update
Field fail-safe u-boot update procedure for pg-wcom boards is defined and
implemented by patch: 59b3403.
This patch invokes the update procedure for pg-wcom-ls102x designs during
early misc_init_f execution.

Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachienergy.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01 15:08:07 +05:30
Mathew McBride
a1d2fd3874 board: traverse: add initial Ten64 support
The Ten64 is a networking-oriented MiniITX board
using the NXP LS1088A SoC.

This patch provides the bare minimum to support
Ten64 boards under U-Boot for distroboot.

Some related drivers have not yet been submitted
and this basic support lacks some of the
opinionated defaults provided by our firmware
distribution.

Signed-off-by: Mathew McBride <matt@traverse.com.au>
[Rebased]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01 15:04:24 +05:30
Tony Dinh
648f8d5f6b arm: kirkwood: GoFlex Home : Use Marvell uclass mvgbe and PHY driver for Ethernet
The GoFlex Home board has the network chip Marvell 88E1116R.
Use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet.

- Currently, CONFIG_RESET_PHY_R symbol is used in
arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood
boards with mv8831116 PHY, with each board defines the function
reset_phy(). Undefine it for this board.
- Add board_eth_init() to use uclass mvgbe to bring up the network.
And remove ad-hoc code.
- Enable CONFIG_PHY_MARVELL to properly configure the network.
- Miscellaneous changes: use CONFIG_SYS_THUMB_BUILD to keep u-boot image
under 512K, use BIT macro, and cleanup comments.

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-31 10:23:38 +01:00
Tony Dinh
7301ed9d68 arm: kirkwood: Pogoplug-V4 : Add board implementation files
Add board header, defconfig, and implementation files for Pogoplug V4.

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Pali Rohár <pali@kernel.org>
2022-01-31 10:23:37 +01:00
Vignesh Raghavendra
f621ff8504 configs: am64xx_evm: Increase BSS max size to 16K
With Ethboot support in SPL, network stack requires more BSS area, so
increase BSS max size to 16K

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2022-01-28 17:58:41 -05:00
Patrick Delaunay
d5e8119bae stm32mp: remove the bootcount activation
Today the bootcount is not managed by the Linux kernel for STM32MP15 as
we don't have driver to update the used backup register in TAMP and the
recovery command still executes the normal bootcmd with
'altbootcmd=run bootcmd'.

So the bootcount feature is never used, the config CONFIG_BOOTCOUNT_LIMIT
and the associated environment variable 'altbootcmd' can be removed to
reduce the U-Boot size.

Each boards can re-enable this feature later in their defconfig, if it is
needed, with the expected backend, for example CONFIG_BOOTCOUNT_GENERIC
or CONFIG_BOOTCOUNT_ENV.

CC: Marek Vasut <marex@denx.de>
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-01-24 10:56:45 +01:00
Marek Vasut
3919aa1722 ARM: dts: stm32: Add DFU support for DHCOR recovery
This patch configures U-Boot SPL for DHCOR SoM to permit DFU upload of
SPL and subsequent u-boot.itb for recovery or commissioning purposes.

To start U-Boot on DHCOR based board, e.g. Avenger96, proceed as follows:
- Install dfu-util on the host PC (in debian this is package 'dfu-util')

- Power off the Avenger96 board.
- Connect both USB-serial console and USB-OTG microB ports to host PC.
- Switch Avenger96 to USB boot mode -- BOOT0..2 switches all set to 0.
- Power on the Avenger96 board.
- Verify using '$ dmesg' that a new device has been detected as follows:
    New USB device found, idVendor=0483, idProduct=df11, bcdDevice= 2.00
    New USB device strings: Mfr=1, Product=2, SerialNumber=3
    Product: DFU in HS Mode @Device ID /0x500, @Revision ID /0x0000
    Manufacturer: STMicroelectronics

- Upload U-Boot SPL:
$ dfu-util -a 1 -D u-boot-spl.stm32
- Upload U-Boot proper:
$ dfu-util -a 0 -D u-boot.itb

- At this point, SPL will wait for user to press "Ctrl-C" on serial
  console. When ready to interact with U-Boot, press Ctrl-C to start
  the bootloader.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-01-24 10:55:06 +01:00
Patrick Delaunay
3425decf52 Convert CONFIG_AT91_EFLASH to Kconfig
This converts the following to Kconfig:
   CONFIG_AT91_EFLASH

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Acked-by: Eugen Hristev <eugen.hristev@microchip.com>
2022-01-21 14:01:35 -05:00
Patrick Delaunay
0f9595b9fa configs: Migrate CONFIG_SYS_MAX_FLASH_BANKS to Kconfig
Use moveconfig.py script to convert define CONFIG_SYS_MAX_FLASH_BANKS
and CONFIG_SYS_MAX_FLASH_BANKS_DETECT to Kconfig and move these entries
to defconfigs.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
[trini: Re-switch to IS_ENABLED check in spi-nor-core.c, re-run migration]
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-01-21 14:01:35 -05:00
Patrick Delaunay
144fef87df mtd: cfi: change CONFIG_SYS_MAX_FLASH_BANKS_DETECT as boolean
Prepare migration to Kconfig.

CONFIG_SYS_MAX_FLASH_BANKS_DETECT becomes boolean and
CONFIG_SYS_MAX_FLASH_BANKS define the MAX size, also used
for detection when CONFIG_SYS_MAX_FLASH_BANKS_DETECT=y
(CFI_MAX_FLASH_BANKS = CONFIG_SYS_MAX_FLASH_BANKS).

CONFIG_SYS_MAX_FLASH_BANKS become mandatory when
CONFIG_SYS_MAX_FLASH_BANKS_DETECT is activated.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-21 14:01:35 -05:00
Alexandru Gagniuc
22eb1526d4 spl: Convert SYS_MMCSD_RAW_MODE_KERNEL_SECTOR to Kconfig
Falcon mode is very useful in improving boot speed. A question that
Falcon mode asks is "Where do I look for the kernel". With MMC boot
media, the correct answer is CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR.
The scope of this patch is to move this to Kconfig.

It is possible for a system to support Falcon mode from NOR but not
MMC. In that case, mmc_load_image_raw_os() would not be used. To
address this, conditionally compile mmc_load_image_raw_os() when
SPL_FALCON_BOOT_MMCSD, instead of SPL_OS_BOOT.

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
[trini: Move spl_start_uboot to its own guard in spl_mmc.c, rerun migration]
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-01-21 14:01:35 -05:00
Simon Glass
d3877fba31 Convert CONFIG_BOOTP_SERVERIP to Kconfig
This converts the following to Kconfig:
   CONFIG_BOOTP_SERVERIP

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-21 14:01:35 -05:00
Simon Glass
d6b318de2f Convert CONFIG_TIMESTAMP to Kconfig
This converts the following to Kconfig:
   CONFIG_TIMESTAMP

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-21 14:01:34 -05:00
Simon Glass
4b37fd146b Convert CONFIG_UDP_CHECKSUM to Kconfig
This converts the following to Kconfig:
   CONFIG_UDP_CHECKSUM

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-21 14:01:34 -05:00
Simon Glass
3df6cd4d63 Convert CONFIG_KEEP_SERVERADDR to Kconfig
This converts the following to Kconfig:
   CONFIG_KEEP_SERVERADDR

Drop the preprocessor usage also.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-21 14:01:34 -05:00
Mattijs Korpershoek
b749d5ecdc configs: meson64_android: define raw parts for bootloader
Per the android documentation[1]:
- the mmc2boot0 partition should be labeled "bootloader".
- the mmc2boot1 partition should be labeled "bootenv".

Also the u-boot documentation[2] refers to a BOOT1_OFFSET of 1 block.

Define 2 raw partitions to store the bootloaders and the bootenv.

[1] https://source.android.com/setup/build/devices#vim3-fastboot
[2] https://u-boot.readthedocs.io/en/latest/board/amlogic/khadas-vim3l.html

Suggested-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20220107163913.3393563-1-mkorpershoek@baylibre.com
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2022-01-20 09:50:54 +01:00
Tom Rini
068415eade Xilinx changes for v2022.04-rc1
gpio:
 - Add modepin driver
 
 net:
 - Save random mac addresses to eth variable
 
 zynqmp gem:
 - Add support for mdio bus DT description
 - Add support for reset and SGMII phy configuration
 - Reduce timeout for MDIO accesses
 
 zynqmp clk:
 - Fix clock handling for gem and usb
 
 phy:
 - Add zynqmp phy/serdes driver
 
 serial:
 - Add one missing compatible string
 
 microblaze:
 - Symbol alignement
 - SPL fixups
 - Code cleanups
 
 zynqmp:
 - Various dt changes, DP pre-reloc, gem resets, gem clocks
 - Switch SOM to shared psu configuration
 - Move dcache handling to firmware driver
 - Workaround gmii2rgmii DT description issue
 - Enable broadcasts again
 - Change firmware enablement logic
 - Small adjustement in firmware driver
 
 versal:
 - Support new mmc@ DT nodes
 - Fix run time variable handling
 - Add missing I2C_PMC ID for power domain
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCYeg7sQAKCRDKSWXLKUoM
 IVhJAKCAiNx/joEeFBJ0XgThtJzFhCjdMwCfYKY9Ewz4L0n2I56lDgR3UJroct0=
 =HtB+
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2022.04-rc1' of https://source.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx changes for v2022.04-rc1

gpio:
- Add modepin driver

net:
- Save random mac addresses to eth variable

zynqmp gem:
- Add support for mdio bus DT description
- Add support for reset and SGMII phy configuration
- Reduce timeout for MDIO accesses

zynqmp clk:
- Fix clock handling for gem and usb

phy:
- Add zynqmp phy/serdes driver

serial:
- Add one missing compatible string

microblaze:
- Symbol alignement
- SPL fixups
- Code cleanups

zynqmp:
- Various dt changes, DP pre-reloc, gem resets, gem clocks
- Switch SOM to shared psu configuration
- Move dcache handling to firmware driver
- Workaround gmii2rgmii DT description issue
- Enable broadcasts again
- Change firmware enablement logic
- Small adjustement in firmware driver

versal:
- Support new mmc@ DT nodes
- Fix run time variable handling
- Add missing I2C_PMC ID for power domain
2022-01-19 11:43:44 -05:00
Amjad Ouled-Ameur
609983e981 board: ti: am335x: Choose CPSW or PRUSS configuration based on jumper setting
The am335x-ice-v2 board's Ethernet ports can be configured
in 'MII' or 'RMII' mode to be connected to 'PRUSS' or 'CPSW'
Ethernet subsystems.

This patch sets the environment variable 'ice_mii' to
'mii' or 'rmii' accordingly. Based on that we choose the
appropriate board devicetree i.e. 'am335x-ice-v2.dtb' or
'am335x-ice-v2-prueth.dtb'.

Since there are 2 Ethernet ports with 2 modes, there can be 4
configurations but for now we consider both ports in different modes
to be an invalid configuration and prevent boot in that case.

Signed-off-by: Roger Quadros <rogerq@ti.com>
[Amjad: use overlay instead of using new am335x-ice-v2-prueth.dtb]
Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
[trini: Make prueth_is_mii be marked __maybe_unused]
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-01-16 08:31:03 -05:00
Piotr Kubik
703f8c8451 ARM: qemu-arm: Fix build fail with boot devices disabled
BOOT_TARGET_DEVICES should only be added if the corresponding u-boot
command is enabled otherwise the build will fail.

Signed-off-by: Piotr Kubik <piotr_kubik@vp.pl>
2022-01-14 14:36:57 -05:00
Pali Rohár
1dcbcc715e arm: mvebu: Replace hardcoded values 0x0030/0x4030 by proper calculation
These hardcoded values were calculated from CONFIG_SPL_TEXT_BASE macro. Now
this macro is configurable via Kconfig, so calculate values 0x0030/0x4030
at compile time via CONFIG_SPL_TEXT_BASE option. Values 0x0030/0x4030
represents offset of CONFIG_SPL_TEXT_BASE from address 0x40000000.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-14 11:39:16 +01:00
Pali Rohár
5435f6e3fd arm: mvebu: db-88f6720: Fix CONFIG_SPL_TEXT_BASE and remove wrong memory layout
Memory layout in the comment is from Armada XP platform which uses load
address 0x40004030. DB-88f6720 is Armada 375 platform which uses same load
address as Armada 38x which is 0x40000030.

Currently SPL support for Armada 375 is unfinished and does not work. There
is missing Serdes initialization and DDR3 training code. So nobody noticed
that CONFIG_SPL_* options are not correct.

Fix at least CONFIG_SPL_TEXT_BASE constant and remove incorrect comments
about memory layout. So it is not misleading.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-14 11:39:16 +01:00
Tom Rini
fe04d885fb Merge branch 'next'
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-01-10 14:01:57 -05:00
Tom Rini
0dadad6d7c - disable CONFIG_NET_RANDOM_ETHADDR when unnecessary on amlogic based configs
- meson64_android: add board specific env settings, in order to support VIM3/L for android
 - add changes to support VIM3/L android boot by using meson64_android.h config
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAmHYV8MACgkQd9zb2sjI
 SdELkA/+LjyjJB1KI6/KLLg43zyFeeZX/SjQd5BUIx6EfaCgyTkuq2lzQnErGmbi
 HoyMoNLpBxLIL27/5TXPzmKYAeOfKPxA/sXTTtx/l7PG8ncSZIoU0+utqjycdUsK
 tSi7EdFzk7/kDDRkqqA7q9nxsPn/7GQNh/ZC9zstMXKaTO/TEb/sZWCMcvQ0MNoB
 ynZKOCg5t60UkIYIRwZwC/OS/ssn86dovv/Aa/8D6qpL2AbS5DoCXHuAr8Dnz7fJ
 q4rV7oLh7a+WHe/qC7R6ylYFIVVqY5JaIgbLDwuvk1z9o7txchMMQnGgllZ35sN9
 LECD2iSDGjhPaHuGCvQwl3TWtIpvtdcP4sQTyJhsXNPxCG6HHvRz7xY4erUohR1I
 LIddwCCHeCrBiaamXNbCzph2+JhfPSQ5ETCL9M6iBMxNUPunlCxjfjDzlT/pg11p
 EO9PIPjRMR9QhxKtd3gZpyAqPuMBEmIwhDtHI6dL3DNOOsF44ObE4swnzS6qXIDn
 jRZzFCC2f/Vyg11YnzFtV3A5eWwJahGDWAGAnnlg6Y8GCLlLmDJitcgA/rWSALko
 T5fC8L8IFUx2RnHczyitJ/wqJl9FqOAnIaoB3Trpwp8gFQ15dQjbvoXldQnAjSS2
 9bns3zOrx79EF4lbHhwNE9UDLm6OjK5vR3h4bGJvyZBmasVsA90=
 =dLEg
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20220107' of https://source.denx.de/u-boot/custodians/u-boot-amlogic into next

- disable CONFIG_NET_RANDOM_ETHADDR when unnecessary on amlogic based configs
- meson64_android: add board specific env settings, in order to support VIM3/L for android
- add changes to support VIM3/L android boot by using meson64_android.h config
2022-01-09 07:56:31 -05:00
Fabio Estevam
353aa7b06f udoo: Adjust the SD card device numbering
After the conversion to DM the SD card shows up as 'mmc 2'
device.

Adjust the 'mmcdev' and the distro command 'func' accordingly.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
2022-01-08 11:16:03 -05:00
Peter Robinson
87c34fe216 udoo_neo: Enable support for USB and storage
Enable support for USB and USB storage on the UDOO Neo.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-01-07 09:30:45 -05:00
Peter Robinson
2bbe1ba0c7 udoo_neo: Fixes for booting from the mSD card
This fixes booting from the mSD card from both SPL and when
using it for the OS booting. It also cleans up a few mmc
booting bits that are no longer needed.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-01-07 09:30:44 -05:00
Mattijs Korpershoek
425f06f86e configs: prepare khadas-vim3{l}_ab_android for AOSP support
In AOSP, both VIM3 and VIM3L have 2 bootloader flavors,
depending on A/B enablement.

For example, for vim3l, the naming is:
- u-boot_kvim3l_noab.bin : legacy support
- u-boot_kvim3l_ab.bin   : A/B support

Prepare a defconfig to support u-boot_kvim3_ab.bin and
u-boot_kvim3l_ab.bin.

This is identical to khadas-vim3{l}_ab_android but will be updated in
the next commit.

Also update partitioning tables for A/B support.

Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20211122152207.219023-4-mkorpershoek@baylibre.com
2022-01-07 10:12:43 +01:00
Mattijs Korpershoek
f89b90d2d9 configs: add khadas-vim3{l}_android for AOSP support
The Khadas VIM3 and VIM3L board are well supported in AOSP[1].
However, there is no mainline U-Boot support for it.
The U-Boot used in AOSP is based on a vendor tree [2]

Add all the necessary bits to flash and boot Android for both Khadas
VIM3 and VIM3L boards.

For Android instructions, refer to [1]

[1] https://source.android.com/setup/build/devices#vim3_and_vim3l_boards
[2] https://gitlab.com/baylibre/amlogic/atv/u-boot

Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20211122152207.219023-3-mkorpershoek@baylibre.com
2022-01-07 10:12:43 +01:00
Mattijs Korpershoek
4eff7426c9 configs: meson64_android: add board specific env settings
This allows us to define extra board variables, such as "board" and
"board_name".

Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20211122152207.219023-2-mkorpershoek@baylibre.com
2022-01-07 10:12:43 +01:00
Ovidiu Panait
83b175be16 microblaze: migrate CONFIG_SYS_USR_EXCEP to Kconfig
Migrate CONFIG_SYS_USR_EXCEP to Kconfig. Also, rename it to
XILINX_MICROBLAZE0_USR_EXCEP in order to match the naming convention of
microblaze-generic Kconfig options.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Link: https://lore.kernel.org/r/20211130163358.2531677-7-ovidiu.panait@windriver.com
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2022-01-05 10:22:03 +01:00
Ovidiu Panait
70c68712ef microblaze: drop CONFIG_SYS_RESET_ADDRESS macro
Microblaze is one the last two users of the CONFIG_SYS_RESET_ADDRESS
macro (the other is arch/powerpc/cpu/mpc8xx/cpu.c, but the macro is not
defined anywhere in powerpc code, so it should be removed there too).

Replace CONFIG_SYS_RESET_ADDRESS usage in start.S with
CONFIG_SYS_TEXT_BASE. If the reset address should really be
user-configurable, a new Kconfig option could be added.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Link: https://lore.kernel.org/r/20211130163358.2531677-6-ovidiu.panait@windriver.com
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2022-01-05 10:22:03 +01:00
Mark Kettenis
3bbd6c0152 arm: apple: Remove CONFIG_SYS_SDRAM_BASE
The memory layout is taken from the device tree passed to us by
m1n1, so there is no need to define this.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2022-01-04 22:48:49 -05:00
Peter Hoyes
439581dca4 vexpress64: Enable VIRTIO_NET network driver
The SMSC driver is using the old driver model.

Init the virtio system in vexpress64.c so that the network device is
discovered.

Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
2022-01-04 22:48:48 -05:00
Peter Hoyes
90f262a695 vexpress64: Clean up BASE_FVP boot configuration
Move env var address values to #defines so they can be reused elsewhere.

Rename env var names to those recommended in the README and modify
addresses to allow more space for the kernel.

Fix issue where fdt is called with invalid arguments when booting
without a ramdisk.

Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
2022-01-04 22:48:48 -05:00
Peter Hoyes
17fe55fd6f vexpress64: Refactor header file to make it easier to add new FVPs
Rename from vexpress_aemv8a.h -> vepxress_aemv8.h as new FVPs may not be
v8-A. No change in behavior.

This is towards future work to enable support for the FVP_BaseR.

Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
2022-01-04 22:48:48 -05:00
Linus Walleij
cc4dcd488c board: stemmy: Increase boot image to 64 MB
When using a recent kernel with a bunch of compiled-in
stuff the kernel image easily becomes bigger than 8 MB
yielding this error:

  Loading Kernel Image
  Image too large: increase CONFIG_SYS_BOOTM_LEN
  Must RESET board to recover

Fix this by bumping to SZ_64MB.

Cc: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
2022-01-04 16:58:23 -05:00
Tom Rini
5fec3c853d Pull request of efi-next
Documentation:
 
 * Add Sunxi board description
 
 UEFI:
 
 * Improvements to U-Boot running on top of UEFI
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAmHOp5gACgkQxIHbvCwF
 GsTonA//Y8wwlaXA1TD6B0fIEcQiZucDJQD0nbHugx+1xw/7w9wHX1qfM4Tskqc4
 y4RA3QyoyUp7tvesP6/EA3mAUSEUp0nrtLPyCJjjXV1lrOaXhwvbdqrhOCqUQLen
 h6RNjhujVtbC90wBWYPal3Ip0hdIUROe3qp9Mk2p4zAru8jBEShn+PTRIeHvf6UV
 9BZ8j9LCivC7hUAG3Cyv+KFhW1s47IN54WddedIREEWk4vIdrUMRLjW/kW8ZbDxx
 gi1Eec25Rte6+p5k/+TJkvCwA8GC1kW+MFMYWxcAARZlUd0yr/S6ru5yaW8km0KQ
 kKgcYGp878hVB41JFEhiGUf9CkwU2oo+3NZGIfNv/vG45J4UppyqNffm9c3ZudWC
 S6DqRVPSp1YQEs45SIVZGx+LK6s1iTBn3DJ/dX68NavuUIYX2nnveUBgtW5vdzGf
 ba0yh4a0EU36hcjd2o3y3sEAjiy+PF8SAZ+f2HQ7JaLjsCWF1zNFGsiAxaEStHp8
 aVrUN0cWQPKnnI2A8DCqjmMaSBDKZDK59k6EeC1ZFdMmGivHEO61A0sDiUTz+IRW
 U7XLvjAA5IVKAtij6T/iab6qvhgwABJRL9lZI5DMiFxJRSl4uSYe9YviG7+EzUg0
 XMIs5nK6jBB74HPKqhBouiSUiRa9UHY/rdyNhJACHQ8GODzCf04=
 =YdSB
 -----END PGP SIGNATURE-----

Merge tag 'efi-next' of https://source.denx.de/u-boot/custodians/u-boot-efi into next

Pull request of efi-next

Documentation:

* Add Sunxi board description

UEFI:

* Improvements to U-Boot running on top of UEFI
2021-12-31 07:28:36 -05:00
Simon Glass
13bfaab3da efi: Allow easy selection of serial-only operation
Add info about how to select vidconsole or serial.

Also set up a demo boot command.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-31 07:18:56 +01:00
Tom Rini
87a9aa604d - various fixes to the sandbox display support
- support for showing a logo without splash screen config
 - support for BMP drawing to depths other than 16bpp
 - tests for the different types of supported BMP images
 - support showing a logo when running coreboot via qemu
 -----BEGIN PGP SIGNATURE-----
 
 iGwEABECACwWIQSC4hxrSoIUVfFO0kRM6ATMmsalXAUCYcsdCQ4cYWd1c3RAZGVu
 eC5kZQAKCRBM6ATMmsalXCLhAJ9pLJE3SpQRzpm+Nu4EMbCDzZKr+wCfbxnAZ9LC
 zS1XZ6u9Se4ysDb+PYs=
 =Hf5j
 -----END PGP SIGNATURE-----

Merge tag 'video-next-20211228' of https://source.denx.de/u-boot/custodians/u-boot-video into next

- various fixes to the sandbox display support
- support for showing a logo without splash screen config
- support for BMP drawing to depths other than 16bpp
- tests for the different types of supported BMP images
- support showing a logo when running coreboot via qemu
2021-12-28 11:28:31 -05:00
Tom Rini
968c6210e6 Convert CONFIG_JFFS2_DEV et al to Kconfig
This converts the following to Kconfig:
   CONFIG_JFFS2_DEV
   CONFIG_JFFS2_LZO
   CONFIG_JFFS2_NAND
   CONFIG_JFFS2_PART_OFFSET
   CONFIG_JFFS2_PART_SIZE

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:19 -05:00
Tom Rini
b2d1c828b9 Convert CONFIG_KIRKWOOD_GPIO to Kconfig
This converts the following to Kconfig:
   CONFIG_KIRKWOOD_GPIO

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:19 -05:00
Tom Rini
440c00de69 Convert CONFIG_SYS_KWD_CONFIG to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_KWD_CONFIG

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:19 -05:00
Tom Rini
f98b3be287 Convert CONFIG_88F5182 et al to Kconfig
This converts the following to Kconfig:
   CONFIG_88F5182
   CONFIG_BOARD_IS_OPENRD_BASE
   CONFIG_BOARD_IS_OPENRD_CLIENT
   CONFIG_BOARD_IS_OPENRD_ULTIMATE
   CONFIG_D2NET_V2
   CONFIG_FEROCEON
   CONFIG_FEROCEON_88FR131
   CONFIG_INETSPACE_V2
   CONFIG_KW88F6192
   CONFIG_KW88F6281
   CONFIG_KW88F6702
   CONFIG_NET2BIG_V2
   CONFIG_NETSPACE_LITE_V2
   CONFIG_NETSPACE_MAX_V2
   CONFIG_NETSPACE_MINI_V2
   CONFIG_NETSPACE_V2
   CONFIG_SHEEVA_88SV131

At this point mv-plug-common.h is now only an include of mv-common.h so
remove that indirection.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:19 -05:00
Tom Rini
e7b7c6761a Convert CONFIG_CPU_FREQ_HZ to Kconfig
This converts the following to Kconfig:
   CONFIG_CPU_FREQ_HZ

Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:19 -05:00
Tom Rini
855e76b5cb Convert CONFIG_CPU_SH7751 to Kconfig
This converts the following to Kconfig:
   CONFIG_CPU_SH7751

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:19 -05:00
Tom Rini
3aca2b6bd7 Convert CONFIG_CPU_PXA27X to Kconfig
This converts the following to Kconfig:
   CONFIG_CPU_PXA27X

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:19 -05:00
Tom Rini
6328f95ea0 serial: arm_dcc: Use CONFIG_ARM64 not CONFIG_CPU_ARMV8
The only place we use CONFIG_CPU_ARMV8 was in the arm_dcc serial driver.
Switch this to CONFIG_ARM64 today, and if in the future we need finer
granularity tuning here, a new CONFIG_SERIAL option needs to be
introduced.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:18 -05:00
Tom Rini
7e11f95b02 Convert CONFIG_SYS_I2C_EEPROM_ADDR_LEN to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_I2C_EEPROM_ADDR_LEN

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:18 -05:00
Tom Rini
3569ac7afa ppc: mpc83xx: Remove unused CONFIG symbols
Neither of these symbols are referenced anywhere else, so remove them.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:18 -05:00
Tom Rini
86e4c4f7b3 Convert CONFIG_83XX_PCICLK to Kconfig
This converts the following to Kconfig:
   CONFIG_83XX_PCICLK

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:18 -05:00
Tom Rini
2f8a6db5d8 Finish conversion of CONFIG_SYS_CLK_FREQ to Kconfig
In order to finish moving this symbol to Kconfig for all platforms, we
need to do a few more things.  First, for all platforms that define this
to a function, introduce CONFIG_DYNAMIC_SYS_CLK_FREQ, similar to
CONFIG_DYNAMIC_DDR_CLK_FREQ and populate clock_legacy.h.  This entails
also switching all users from CONFIG_SYS_CLK_FREQ to get_board_sys_clk()
and updating a few preprocessor tests.

With that done, all platforms that define a value here can be converted
to Kconfig, and a fall-back of zero is sufficiently safe to use (and
what is used today in cases where code may or may not have this
available).  Make sure that code which calls this function includes
<clock_legacy.h> to get the prototype.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:18 -05:00
Tom Rini
e4c3ce7e28 CONFIG_SYS_CLK_FREQ: Consistently be static or get_board_sys_clk()
This CONFIG option is used in one of two ways.  The first way is that it
is defined to a static value, of an unsigned long size.  The second way
is that it is defined to something, typically a function, to determine
this value at run time.

However, in a few cases that function returns a static value.  Change
that to using the static value directly.

In the case of using something at run time, convert everything to using
a function of the same name and prototype.  This will allow for further
cleanups.

Finally, we have a few cases where the function is just not used, so
drop it.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:18 -05:00
Tom Rini
2196a4a7ef arm: s5pc1xx: Move CONFIG_SYS_CLK_FREQ_C1x0 out of CONFIG namespace
The values CONFIG_SYS_CLK_FREQ_C100 and CONFIG_SYS_CLK_FREQ_C110 are
only used in one place and not changed by the board config file.  Move
these out of the CONFIG namespace and in to the CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:18 -05:00
Tom Rini
ba1ed5b022 Convert CONFIG_ARCH_MAP_SYSMEM to Kconfig
This converts the following to Kconfig:
   CONFIG_ARCH_MAP_SYSMEM

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:18 -05:00
Tom Rini
9ec4df336e Convert CONFIG_SYS_NAND_U_BOOT_OFFS to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_NAND_U_BOOT_OFFS

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:18 -05:00