Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-11 07:34:31 +00:00
Code Issues Projects Releases Packages Wiki Activity

ARM: dts: imx6q-dhcom: Use 1G ethernet on the PDK2 board

Browse source 
The PDK2 board is capable of running both 100M and 1G ethernet. However,
the i.MX6 has only one ethernet MAC, so it is possible to configure
either 100M or 1G Ethernet. In case of 100M option, the PHY is on the
SoM and the signals are routed to a RJ45 port. For 1G the PHY is on
the PDK2 board with another RJ45 port. 100M and 1G ethernet use
different signal pins from the i.MX6, but share the MDIO bus.

This SoM board combination is used to demonstrate how to enable 1G
ethernet configuration.

Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Stefano Babic <sbabic@denx.de>
This commit is contained in:
Christoph Niedermaier 2021-11-28 03:53:18 +01:00 committed by Stefano Babic
parent eb1c716c6d
commit ca27227c59
3 changed files with 50 additions and 6 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

2
arch/arm/dts/imx6qdl-dhcom-pdk2-u-boot.dtsi
View file

@ -15,7 +15,7 @@
};
&fec {
phy-reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
phy-reset-duration = <1>;
phy-reset-post-delay = <10>;

50
arch/arm/dts/imx6qdl-dhcom-pdk2.dtsi
View file

@ -38,6 +38,45 @@
status = "okay";
};
/* 1G ethernet */
/delete-node/ &ethphy0;
&fec {
phy-mode = "rgmii";
phy-handle = <&ethphy7>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet_1G>;
status = "okay";
mdio {
#address-cells = <1>;
#size-cells = <0>;
ethphy7: ethernet-phy@7 { /* KSZ 9021 */
compatible = "ethernet-phy-ieee802.3-c22";
interrupt-parent = <&gpio1>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
pinctrl-0 = <&pinctrl_ethphy7>;
pinctrl-names = "default";
reg = <7>;
reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
reset-assert-us = <1000>;
reset-deassert-us = <1000>;
rxc-skew-ps = <3000>;
rxd0-skew-ps = <0>;
rxd1-skew-ps = <0>;
rxd2-skew-ps = <0>;
rxd3-skew-ps = <0>;
txc-skew-ps = <3000>;
txd0-skew-ps = <0>;
txd1-skew-ps = <0>;
txd2-skew-ps = <0>;
txd3-skew-ps = <0>;
rxdv-skew-ps = <0>;
txen-skew-ps = <0>;
};
};
};
&hdmi {
ddc-i2c-bus = <&i2c2>;
status = "okay";
@ -113,9 +152,14 @@
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x000b0
MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x000b1
MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x000b1
>;
};
pinctrl_ethphy7: ethphy7-grp {
fsl,pins = <
MX6QDL_PAD_EIM_D29__GPIO3_IO29 0xb0 /* Reset */
MX6QDL_PAD_GPIO_0__GPIO1_IO00 0xb1 /* Int */
MX6QDL_PAD_EIM_D26__GPIO3_IO26 0xb1 /* WOL */
>;
};

4
include/configs/dh_imx6.h
View file

@ -32,9 +32,9 @@
/* FEC ethernet */
#define IMX_FEC_BASE ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE RMII
#define CONFIG_FEC_XCV_TYPE RGMII
#define CONFIG_ETHPRIME "FEC"
#define CONFIG_FEC_MXC_PHYADDR 0
#define CONFIG_FEC_MXC_PHYADDR 7
#define CONFIG_ARP_TIMEOUT 200UL
/* MMC Configs */