Convert CONFIG_SPL_PAD_TO et al to Kconfig

This converts the following to Kconfig:
   CONFIG_SPL_PAD_TO
   CONFIG_SPL_MAX_SIZE
   CONFIG_TPL_PAD_TO
   CONFIG_TPL_MAX_SIZE

Note that we need to make TPL_MAX_SIZE be hex, and so move and convert the
existing places.

Signed-off-by: Tom Rini <trini@konsulko.com>
This commit is contained in:
Tom Rini 2022-05-16 17:20:26 -04:00
parent 4a11e34bc9
commit ca8a329a1b
536 changed files with 561 additions and 281 deletions

24
README
View file

@ -1665,12 +1665,6 @@ The following options need to be configured:
CONFIG_SPL_MAX_FOOTPRINT and CONFIG_SPL_BSS_MAX_SIZE
must not be both defined at the same time.
CONFIG_SPL_MAX_SIZE
Maximum size of the SPL image (text, data, rodata, and
linker lists sections), BSS excluded.
When defined, the linker checks that the actual size does
not exceed it.
CONFIG_SPL_RELOC_TEXT_BASE
Address to relocate to. If unspecified, this is equal to
CONFIG_SPL_TEXT_BASE (i.e. no relocation is done).
@ -1760,13 +1754,6 @@ The following options need to be configured:
CONFIG_SPL_RAM_DEVICE
Support for running image already present in ram, in SPL binary
CONFIG_SPL_PAD_TO
Image offset to which the SPL should be padded before appending
the SPL payload. By default, this is defined as
CONFIG_SPL_MAX_SIZE, or 0 if CONFIG_SPL_MAX_SIZE is undefined.
CONFIG_SPL_PAD_TO must be either 0, meaning to append the SPL
payload without any padding, or >= CONFIG_SPL_MAX_SIZE.
CONFIG_SPL_TARGET
Final target image containing SPL and payload. Some SPLs
use an arch-specific makefile fragment instead, for
@ -1778,17 +1765,6 @@ The following options need to be configured:
option to re-enable it. This will affect the output of the
bootm command when booting a FIT image.
- TPL framework
CONFIG_TPL
Enable building of TPL globally.
CONFIG_TPL_PAD_TO
Image offset to which the TPL should be padded before appending
the TPL payload. By default, this is defined as
CONFIG_SPL_MAX_SIZE, or 0 if CONFIG_SPL_MAX_SIZE is undefined.
CONFIG_SPL_PAD_TO must be either 0, meaning to append the SPL
payload without any padding, or >= CONFIG_SPL_MAX_SIZE.
- Interrupt support (PPC):
There are common interrupt_init() and timer_interrupt()

View file

@ -56,9 +56,6 @@ config TPL_LDSCRIPT
config TPL_TEXT_BASE
default 0xff0e1000
config TPL_MAX_SIZE
default 10240
config TPL_STACK
default 0xff0e4fff

View file

@ -26,9 +26,6 @@ config SPL_LIBGENERIC_SUPPORT
config SPL_SERIAL
default y
config TPL_MAX_SIZE
default 28672
config TPL_STACK
default 0x10088000

View file

@ -172,9 +172,6 @@ config SPL_SERIAL
config TPL_LDSCRIPT
default "arch/arm/mach-rockchip/u-boot-tpl.lds"
config TPL_MAX_SIZE
default 32768
config TPL_STACK
default 0xff718000

View file

@ -36,9 +36,6 @@ config TPL_LDSCRIPT
config TPL_TEXT_BASE
default 0xff091000
config TPL_MAX_SIZE
default 28672
config TPL_STACK
default 0xff098000

View file

@ -71,9 +71,6 @@ config SPL_LDSCRIPT
config SPL_STACK_R_ADDR
default 0x04000000
config TPL_MAX_SIZE
default 28672
config TPL_STACK
default 0xff8cffff

View file

@ -143,9 +143,6 @@ config SPL_LIBGENERIC_SUPPORT
config TPL_LDSCRIPT
default "arch/arm/mach-rockchip/u-boot-tpl-v8.lds"
config TPL_MAX_SIZE
default 188416
config TPL_STACK
default 0xff8effff

View file

@ -75,6 +75,36 @@ config SPL_SIZE_LIMIT_PROVIDE_STACK
of SRAM available for SPL when the stack required before reolcation
uses this SRAM, too.
config SPL_MAX_SIZE
hex "Maximum size of the SPL image, excluding BSS"
default 0x30000 if ARCH_MX6 && MX6_OCRAM_256KB
default 0x1b000 if AM33XX && !TI_SECURE_DEVICE
default 0x10000 if ARCH_MX6 && !MX6_OCRAM_256KB
default 0x7fa0 if SUNXI_SRAM_ADDRESS = 0x10000
default 0x7fa0 if SUNXI_SRAM_ADDRESS = 0x20000 && !MACH_SUN50I_H616
default 0x7000 if RCAR_GEN3
default 0x5fa0 if SUNXI_SRAM_ADDRESS = 0x0
default 0x0
help
Maximum size of the SPL image (text, data, rodata, and linker lists
sections), BSS excluded. When defined, the linker checks that the
actual size does not exceed it.
config SPL_PAD_TO
hex "Offset to which the SPL should be padded before appending the SPL payload"
default 0x31000 if ARCH_MX6 && MX6_OCRAM_256KB
default 0x11000 if ARCH_MX7 || (ARCH_MX6 && !MX6_OCRAM_256KB)
default 0x10000 if ARCH_KEYSTONE
default 0x8000 if ARCH_SUNXI && !MACH_SUN50I_H616
default TPL_MAX_SIZE if TPL_MAX_SIZE > SPL_MAX_SIZE
default SPL_MAX_SIZE
help
Image offset to which the SPL should be padded before appending the
SPL payload. By default, this is defined as CONFIG_SPL_MAX_SIZE, or 0 if
CONFIG_SPL_MAX_SIZE is undefined. CONFIG_SPL_PAD_TO must be either
0, meaning to append the SPL payload without any padding, or >=
CONFIG_SPL_MAX_SIZE.
config SPL_SYS_STACK_F_CHECK_BYTE
hex
default 0xaa
@ -1489,12 +1519,26 @@ config TPL_TEXT_BASE
The base address for the .text section of the TPL stage.
config TPL_MAX_SIZE
int "Maximum size (in bytes) for the TPL stage"
default 0
depends on TPL
hex "Maximum size (in bytes) for the TPL stage"
default 0x2e000 if ROCKCHIP_RK3399
default 0x8000 if ROCKCHIP_RK3288
default 0x7000 if ROCKCHIP_RK322X || ROCKCHIP_RK3328 || ROCKCHIP_RK3368
default 0x2800 if ROCKCHIP_PX30
default 0x0
help
The maximum size (in bytes) of the TPL stage.
config TPL_PAD_TO
hex "Offset to which the TPL should be padded before appending the TPL payload"
depends on !TPL_FRAMEWORK && PPC
default TPL_MAX_SIZE
help
Image offset to which the TPL should be padded before appending the
TPL payload. By default, this is defined as CONFIG_TPL_MAX_SIZE, or 0 if
CONFIG_TPL_MAX_SIZE is undefined. CONFIG_TPL_PAD_TO must be either
0, meaning to append the TPL payload without any padding, or >=
CONFIG_TPL_MAX_SIZE.
config TPL_STACK
hex "Address of the initial stack-pointer for the TPL stage"
depends on TPL_NEEDS_SEPARATE_STACK

View file

@ -28,11 +28,13 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
CONFIG_SPL_MAX_SIZE=0x2000
CONFIG_SPL_NAND_BOOT=y
CONFIG_SPL_INIT_MINIMAL=y
CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_TPL=y
CONFIG_TPL_MAX_SIZE=0x20000
CONFIG_TPL_DRIVERS_MISC=y
CONFIG_TPL_ENV_SUPPORT=y
CONFIG_TPL_I2C=y

View file

@ -20,6 +20,7 @@ CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudra
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_SPL_MAX_SIZE=0x18000
CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PBSIZE=276

View file

@ -26,6 +26,7 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
CONFIG_SPL_MAX_SIZE=0x18000
CONFIG_SPL_MMC_BOOT=y
CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_SPL_ENV_SUPPORT=y

View file

@ -29,6 +29,7 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
CONFIG_SPL_MAX_SIZE=0x18000
CONFIG_SPL_SPI_BOOT=y
CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_SPL_ENV_SUPPORT=y

View file

@ -27,11 +27,13 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
CONFIG_SPL_MAX_SIZE=0x2000
CONFIG_SPL_NAND_BOOT=y
CONFIG_SPL_INIT_MINIMAL=y
CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_TPL=y
CONFIG_TPL_MAX_SIZE=0x20000
CONFIG_TPL_DRIVERS_MISC=y
CONFIG_TPL_ENV_SUPPORT=y
CONFIG_TPL_I2C=y

View file

@ -19,6 +19,7 @@ CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudra
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_SPL_MAX_SIZE=0x18000
CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PBSIZE=276

View file

@ -25,6 +25,7 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
CONFIG_SPL_MAX_SIZE=0x18000
CONFIG_SPL_MMC_BOOT=y
CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_SPL_ENV_SUPPORT=y

View file

@ -28,6 +28,7 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
CONFIG_SPL_MAX_SIZE=0x18000
CONFIG_SPL_SPI_BOOT=y
CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_SPL_ENV_SUPPORT=y

View file

@ -29,11 +29,13 @@ CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_ID_EEPROM=y
# CONFIG_SPL_FRAMEWORK is not set
CONFIG_SPL_MAX_SIZE=0x2000
CONFIG_SPL_NAND_BOOT=y
CONFIG_SPL_INIT_MINIMAL=y
CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_TPL=y
CONFIG_TPL_MAX_SIZE=0x20000
CONFIG_TPL_DRIVERS_MISC=y
CONFIG_TPL_ENV_SUPPORT=y
CONFIG_TPL_I2C=y

View file

@ -21,6 +21,7 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_ID_EEPROM=y
CONFIG_SPL_MAX_SIZE=0x18000
CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PBSIZE=276

View file

@ -27,6 +27,7 @@ CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_ID_EEPROM=y
# CONFIG_SPL_FRAMEWORK is not set
CONFIG_SPL_MAX_SIZE=0x18000
CONFIG_SPL_MMC_BOOT=y
CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_SPL_ENV_SUPPORT=y

View file

@ -30,6 +30,7 @@ CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_ID_EEPROM=y
# CONFIG_SPL_FRAMEWORK is not set
CONFIG_SPL_MAX_SIZE=0x18000
CONFIG_SPL_SPI_BOOT=y
CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_SPL_ENV_SUPPORT=y

View file

@ -28,11 +28,13 @@ CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_ID_EEPROM=y
# CONFIG_SPL_FRAMEWORK is not set
CONFIG_SPL_MAX_SIZE=0x2000
CONFIG_SPL_NAND_BOOT=y
CONFIG_SPL_INIT_MINIMAL=y
CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_TPL=y
CONFIG_TPL_MAX_SIZE=0x20000
CONFIG_TPL_DRIVERS_MISC=y
CONFIG_TPL_ENV_SUPPORT=y
CONFIG_TPL_I2C=y

View file

@ -20,6 +20,7 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_ID_EEPROM=y
CONFIG_SPL_MAX_SIZE=0x18000
CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PBSIZE=276

View file

@ -26,6 +26,7 @@ CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_ID_EEPROM=y
# CONFIG_SPL_FRAMEWORK is not set
CONFIG_SPL_MAX_SIZE=0x18000
CONFIG_SPL_MMC_BOOT=y
CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_SPL_ENV_SUPPORT=y

View file

@ -29,6 +29,7 @@ CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_ID_EEPROM=y
# CONFIG_SPL_FRAMEWORK is not set
CONFIG_SPL_MAX_SIZE=0x18000
CONFIG_SPL_SPI_BOOT=y
CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_SPL_ENV_SUPPORT=y

View file

@ -29,11 +29,13 @@ CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_MISC_INIT_R is not set
# CONFIG_SPL_FRAMEWORK is not set
CONFIG_SPL_MAX_SIZE=0x1000
CONFIG_SPL_NAND_BOOT=y
CONFIG_SPL_INIT_MINIMAL=y
CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_TPL=y
CONFIG_TPL_MAX_SIZE=0x20000
CONFIG_TPL_ENV_SUPPORT=y
CONFIG_TPL_I2C=y
CONFIG_TPL_MPC8XXX_INIT_DDR=y

View file

@ -28,6 +28,7 @@ CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_MISC_INIT_R is not set
# CONFIG_SPL_FRAMEWORK is not set
CONFIG_SPL_MAX_SIZE=0x20000
CONFIG_SPL_MMC_BOOT=y
CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_SPL_ENV_SUPPORT=y

View file

@ -31,6 +31,7 @@ CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_MISC_INIT_R is not set
# CONFIG_SPL_FRAMEWORK is not set
CONFIG_SPL_MAX_SIZE=0x20000
CONFIG_SPL_SPI_BOOT=y
CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_SPL_ENV_SUPPORT=y

View file

@ -22,6 +22,7 @@ CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$con
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_MISC_INIT_R is not set
CONFIG_SPL_MAX_SIZE=0x20000
CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_HUSH_PARSER=y
# CONFIG_AUTO_COMPLETE is not set

View file

@ -28,11 +28,13 @@ CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_MISC_INIT_R is not set
# CONFIG_SPL_FRAMEWORK is not set
CONFIG_SPL_MAX_SIZE=0x1000
CONFIG_SPL_NAND_BOOT=y
CONFIG_SPL_INIT_MINIMAL=y
CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_TPL=y
CONFIG_TPL_MAX_SIZE=0x20000
CONFIG_TPL_ENV_SUPPORT=y
CONFIG_TPL_I2C=y
CONFIG_TPL_MPC8XXX_INIT_DDR=y

View file

@ -27,6 +27,7 @@ CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_MISC_INIT_R is not set
# CONFIG_SPL_FRAMEWORK is not set
CONFIG_SPL_MAX_SIZE=0x20000
CONFIG_SPL_MMC_BOOT=y
CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_SPL_ENV_SUPPORT=y

View file

@ -30,6 +30,7 @@ CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_MISC_INIT_R is not set
# CONFIG_SPL_FRAMEWORK is not set
CONFIG_SPL_MAX_SIZE=0x20000
CONFIG_SPL_SPI_BOOT=y
CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_SPL_ENV_SUPPORT=y

View file

@ -21,6 +21,7 @@ CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$con
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_MISC_INIT_R is not set
CONFIG_SPL_MAX_SIZE=0x20000
CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_HUSH_PARSER=y
# CONFIG_AUTO_COMPLETE is not set

View file

@ -28,11 +28,13 @@ CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_MISC_INIT_R is not set
# CONFIG_SPL_FRAMEWORK is not set
CONFIG_SPL_MAX_SIZE=0x1000
CONFIG_SPL_NAND_BOOT=y
CONFIG_SPL_INIT_MINIMAL=y
CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_TPL=y
CONFIG_TPL_MAX_SIZE=0x20000
CONFIG_TPL_ENV_SUPPORT=y
CONFIG_TPL_I2C=y
CONFIG_TPL_MPC8XXX_INIT_DDR=y

View file

@ -27,6 +27,7 @@ CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_MISC_INIT_R is not set
# CONFIG_SPL_FRAMEWORK is not set
CONFIG_SPL_MAX_SIZE=0x20000
CONFIG_SPL_MMC_BOOT=y
CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_SPL_ENV_SUPPORT=y

View file

@ -30,6 +30,7 @@ CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_MISC_INIT_R is not set
# CONFIG_SPL_FRAMEWORK is not set
CONFIG_SPL_MAX_SIZE=0x20000
CONFIG_SPL_SPI_BOOT=y
CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_SPL_ENV_SUPPORT=y

View file

@ -21,6 +21,7 @@ CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$con
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_MISC_INIT_R is not set
CONFIG_SPL_MAX_SIZE=0x20000
CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_HUSH_PARSER=y
# CONFIG_AUTO_COMPLETE is not set

View file

@ -29,11 +29,13 @@ CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_MISC_INIT_R is not set
# CONFIG_SPL_FRAMEWORK is not set
CONFIG_SPL_MAX_SIZE=0x1000
CONFIG_SPL_NAND_BOOT=y
CONFIG_SPL_INIT_MINIMAL=y
CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_TPL=y
CONFIG_TPL_MAX_SIZE=0x20000
CONFIG_TPL_ENV_SUPPORT=y
CONFIG_TPL_I2C=y
CONFIG_TPL_MPC8XXX_INIT_DDR=y

View file

@ -28,6 +28,7 @@ CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_MISC_INIT_R is not set
# CONFIG_SPL_FRAMEWORK is not set
CONFIG_SPL_MAX_SIZE=0x20000
CONFIG_SPL_MMC_BOOT=y
CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_SPL_ENV_SUPPORT=y

View file

@ -31,6 +31,7 @@ CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_MISC_INIT_R is not set
# CONFIG_SPL_FRAMEWORK is not set
CONFIG_SPL_MAX_SIZE=0x20000
CONFIG_SPL_SPI_BOOT=y
CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_SPL_ENV_SUPPORT=y

View file

@ -22,6 +22,7 @@ CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$con
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_MISC_INIT_R is not set
CONFIG_SPL_MAX_SIZE=0x20000
CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_HUSH_PARSER=y
# CONFIG_AUTO_COMPLETE is not set

View file

@ -28,11 +28,13 @@ CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_MISC_INIT_R is not set
# CONFIG_SPL_FRAMEWORK is not set
CONFIG_SPL_MAX_SIZE=0x1000
CONFIG_SPL_NAND_BOOT=y
CONFIG_SPL_INIT_MINIMAL=y
CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_TPL=y
CONFIG_TPL_MAX_SIZE=0x20000
CONFIG_TPL_ENV_SUPPORT=y
CONFIG_TPL_I2C=y
CONFIG_TPL_MPC8XXX_INIT_DDR=y

View file

@ -27,6 +27,7 @@ CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_MISC_INIT_R is not set
# CONFIG_SPL_FRAMEWORK is not set
CONFIG_SPL_MAX_SIZE=0x20000
CONFIG_SPL_MMC_BOOT=y
CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_SPL_ENV_SUPPORT=y

View file

@ -30,6 +30,7 @@ CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_MISC_INIT_R is not set
# CONFIG_SPL_FRAMEWORK is not set
CONFIG_SPL_MAX_SIZE=0x20000
CONFIG_SPL_SPI_BOOT=y
CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_SPL_ENV_SUPPORT=y

View file

@ -21,6 +21,7 @@ CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$con
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_MISC_INIT_R is not set
CONFIG_SPL_MAX_SIZE=0x20000
CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_HUSH_PARSER=y
# CONFIG_AUTO_COMPLETE is not set

View file

@ -32,6 +32,8 @@ CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_ID_EEPROM=y
# CONFIG_SPL_FRAMEWORK is not set
CONFIG_SPL_MAX_SIZE=0x28000
CONFIG_SPL_PAD_TO=0x40000
CONFIG_SPL_NAND_BOOT=y
CONFIG_SPL_FSL_PBL=y
CONFIG_SPL_FLUSH_IMAGE=y

View file

@ -33,6 +33,8 @@ CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_ID_EEPROM=y
# CONFIG_SPL_FRAMEWORK is not set
CONFIG_SPL_MAX_SIZE=0x28000
CONFIG_SPL_PAD_TO=0x40000
CONFIG_SPL_MMC_BOOT=y
CONFIG_SPL_FSL_PBL=y
CONFIG_SPL_FLUSH_IMAGE=y

View file

@ -36,6 +36,8 @@ CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_ID_EEPROM=y
# CONFIG_SPL_FRAMEWORK is not set
CONFIG_SPL_MAX_SIZE=0x28000
CONFIG_SPL_PAD_TO=0x40000
CONFIG_SPL_SPI_BOOT=y
CONFIG_SPL_FSL_PBL=y
CONFIG_SPL_FLUSH_IMAGE=y

View file

@ -28,6 +28,8 @@ CONFIG_ARCH_MISC_INIT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
CONFIG_SPL_MAX_SIZE=0x28000
CONFIG_SPL_PAD_TO=0x40000
CONFIG_SPL_NAND_BOOT=y
CONFIG_SPL_FSL_PBL=y
CONFIG_SPL_FLUSH_IMAGE=y

View file

@ -29,6 +29,8 @@ CONFIG_ARCH_MISC_INIT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
CONFIG_SPL_MAX_SIZE=0x28000
CONFIG_SPL_PAD_TO=0x40000
CONFIG_SPL_MMC_BOOT=y
CONFIG_SPL_FSL_PBL=y
CONFIG_SPL_FLUSH_IMAGE=y

View file

@ -32,6 +32,8 @@ CONFIG_ARCH_MISC_INIT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
CONFIG_SPL_MAX_SIZE=0x28000
CONFIG_SPL_PAD_TO=0x40000
CONFIG_SPL_SPI_BOOT=y
CONFIG_SPL_FSL_PBL=y
CONFIG_SPL_FLUSH_IMAGE=y

View file

@ -33,6 +33,8 @@ CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudra
CONFIG_ARCH_MISC_INIT=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
CONFIG_SPL_MAX_SIZE=0x28000
CONFIG_SPL_PAD_TO=0x40000
CONFIG_SPL_NAND_BOOT=y
CONFIG_SPL_FSL_PBL=y
CONFIG_SPL_FLUSH_IMAGE=y

View file

@ -34,6 +34,8 @@ CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudra
CONFIG_ARCH_MISC_INIT=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
CONFIG_SPL_MAX_SIZE=0x28000
CONFIG_SPL_PAD_TO=0x40000
CONFIG_SPL_MMC_BOOT=y
CONFIG_SPL_FSL_PBL=y
CONFIG_SPL_FLUSH_IMAGE=y

View file

@ -37,6 +37,8 @@ CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudra
CONFIG_ARCH_MISC_INIT=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
CONFIG_SPL_MAX_SIZE=0x28000
CONFIG_SPL_PAD_TO=0x40000
CONFIG_SPL_SPI_BOOT=y
CONFIG_SPL_FSL_PBL=y
CONFIG_SPL_FLUSH_IMAGE=y

View file

@ -31,6 +31,8 @@ CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudra
CONFIG_ARCH_MISC_INIT=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
CONFIG_SPL_MAX_SIZE=0x28000
CONFIG_SPL_PAD_TO=0x40000
CONFIG_SPL_NAND_BOOT=y
CONFIG_SPL_FSL_PBL=y
CONFIG_SPL_FLUSH_IMAGE=y

View file

@ -32,6 +32,8 @@ CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudra
CONFIG_ARCH_MISC_INIT=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
CONFIG_SPL_MAX_SIZE=0x28000
CONFIG_SPL_PAD_TO=0x40000
CONFIG_SPL_MMC_BOOT=y
CONFIG_SPL_FSL_PBL=y
CONFIG_SPL_FLUSH_IMAGE=y

View file

@ -35,6 +35,8 @@ CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudra
CONFIG_ARCH_MISC_INIT=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
CONFIG_SPL_MAX_SIZE=0x28000
CONFIG_SPL_PAD_TO=0x40000
CONFIG_SPL_SPI_BOOT=y
CONFIG_SPL_FSL_PBL=y
CONFIG_SPL_FLUSH_IMAGE=y

View file

@ -32,6 +32,8 @@ CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudra
CONFIG_ARCH_MISC_INIT=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
CONFIG_SPL_MAX_SIZE=0x28000
CONFIG_SPL_PAD_TO=0x40000
CONFIG_SPL_NAND_BOOT=y
CONFIG_SPL_FSL_PBL=y
CONFIG_SPL_FLUSH_IMAGE=y

View file

@ -33,6 +33,8 @@ CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudra
CONFIG_ARCH_MISC_INIT=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
CONFIG_SPL_MAX_SIZE=0x28000
CONFIG_SPL_PAD_TO=0x40000
CONFIG_SPL_MMC_BOOT=y
CONFIG_SPL_FSL_PBL=y
CONFIG_SPL_FLUSH_IMAGE=y

View file

@ -36,6 +36,8 @@ CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudra
CONFIG_ARCH_MISC_INIT=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
CONFIG_SPL_MAX_SIZE=0x28000
CONFIG_SPL_PAD_TO=0x40000
CONFIG_SPL_SPI_BOOT=y
CONFIG_SPL_FSL_PBL=y
CONFIG_SPL_FLUSH_IMAGE=y

View file

@ -30,6 +30,8 @@ CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudra
CONFIG_ARCH_MISC_INIT=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
CONFIG_SPL_MAX_SIZE=0x28000
CONFIG_SPL_PAD_TO=0x40000
CONFIG_SPL_MMC_BOOT=y
CONFIG_SPL_FSL_PBL=y
CONFIG_SPL_FLUSH_IMAGE=y

View file

@ -15,7 +15,7 @@ CONFIG_SPL_LOAD_FIT_ADDRESS=0x00200000
CONFIG_SYS_MONITOR_BASE=0x88000000
CONFIG_BOOTDELAY=3
CONFIG_BOARD_EARLY_INIT_F=y
# CONFIG_BINMAN_FDT is not set
CONFIG_SPL_MAX_SIZE=0x100000
CONFIG_SYS_PROMPT="RISC-V # "
CONFIG_SYS_PBSIZE=1050
CONFIG_CMD_IMLS=y
@ -43,3 +43,4 @@ CONFIG_BAUDRATE=38400
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_ATCSPI200_SPI=y
# CONFIG_BINMAN_FDT is not set

View file

@ -17,7 +17,7 @@ CONFIG_SPL_LOAD_FIT_ADDRESS=0x80010000
CONFIG_SYS_MONITOR_BASE=0x88000000
CONFIG_BOOTDELAY=3
CONFIG_BOARD_EARLY_INIT_F=y
# CONFIG_BINMAN_FDT is not set
CONFIG_SPL_MAX_SIZE=0x100000
CONFIG_SYS_PROMPT="RISC-V # "
CONFIG_SYS_PBSIZE=1050
CONFIG_CMD_IMLS=y
@ -45,3 +45,4 @@ CONFIG_BAUDRATE=38400
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_ATCSPI200_SPI=y
# CONFIG_BINMAN_FDT is not set

View file

@ -16,7 +16,7 @@ CONFIG_SPL_LOAD_FIT_ADDRESS=0x00200000
CONFIG_SYS_MONITOR_BASE=0x88000000
CONFIG_BOOTDELAY=3
CONFIG_BOARD_EARLY_INIT_F=y
# CONFIG_BINMAN_FDT is not set
CONFIG_SPL_MAX_SIZE=0x100000
CONFIG_SYS_PROMPT="RISC-V # "
CONFIG_SYS_PBSIZE=1050
CONFIG_CMD_IMLS=y
@ -44,3 +44,4 @@ CONFIG_BAUDRATE=38400
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_ATCSPI200_SPI=y
# CONFIG_BINMAN_FDT is not set

View file

@ -18,7 +18,7 @@ CONFIG_SPL_LOAD_FIT_ADDRESS=0x80010000
CONFIG_SYS_MONITOR_BASE=0x88000000
CONFIG_BOOTDELAY=3
CONFIG_BOARD_EARLY_INIT_F=y
# CONFIG_BINMAN_FDT is not set
CONFIG_SPL_MAX_SIZE=0x100000
CONFIG_SYS_PROMPT="RISC-V # "
CONFIG_SYS_PBSIZE=1050
CONFIG_CMD_IMLS=y
@ -46,3 +46,4 @@ CONFIG_BAUDRATE=38400
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_ATCSPI200_SPI=y
# CONFIG_BINMAN_FDT is not set

View file

@ -28,6 +28,7 @@ CONFIG_SYS_LOAD_ADDR=0x50000000
CONFIG_ENV_ADDR=0xC0000
CONFIG_FIT=y
CONFIG_BOOTDELAY=3
CONFIG_SPL_MAX_SIZE=0x4000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_RAM_SUPPORT=y

View file

@ -17,6 +17,7 @@ CONFIG_BOOTCOMMAND="run findfdt; run init_console; run finduuid; run distro_boot
CONFIG_LOGLEVEL=3
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_ARCH_MISC_INIT=y
CONFIG_SPL_MAX_SIZE=0xb0b0
CONFIG_SPL_FIT_IMAGE_TINY=y
# CONFIG_SPL_ENV_SUPPORT is not set
# CONFIG_SPL_FS_EXT4 is not set

View file

@ -20,6 +20,7 @@ CONFIG_BOOTCOMMAND="run findfdt; run init_console; run finduuid; run distro_boot
CONFIG_LOGLEVEL=3
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_ARCH_MISC_INIT=y
CONFIG_SPL_MAX_SIZE=0x9ab0
CONFIG_SPL_FIT_IMAGE_TINY=y
# CONFIG_SPL_ENV_SUPPORT is not set
# CONFIG_SPL_FS_EXT4 is not set

View file

@ -16,6 +16,7 @@ CONFIG_LTO=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_BOOTDELAY=10
CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then echo SD/MMC found on device $mmcdev; if run loadbootenv; then run importbootenv; fi; echo Checking if uenvcmd is set ...; if test -n $uenvcmd; then echo Running uenvcmd ...; run uenvcmd; fi; echo Running default loadimage ...; setenv bootfile zImage; if run loadimage; then run loadfdt; run mmcboot; fi; else run nandboot; fi"
CONFIG_SPL_MAX_SIZE=0xec00
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
# CONFIG_SPL_FS_EXT4 is not set

View file

@ -15,6 +15,7 @@ CONFIG_SPL_LOAD_FIT=y
CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd"
CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_MISC_INIT_R is not set
CONFIG_SPL_MAX_SIZE=0x439e0
CONFIG_SPL_ETH=y
CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
CONFIG_SPL_MTD_SUPPORT=y

View file

@ -15,6 +15,7 @@ CONFIG_SPL_LOAD_FIT=y
CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd"
CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_MISC_INIT_R is not set
CONFIG_SPL_MAX_SIZE=0x439e0
CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_NAND_DRIVERS=y

View file

@ -14,6 +14,7 @@ CONFIG_SPL_LOAD_FIT=y
CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd"
CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_MISC_INIT_R is not set
CONFIG_SPL_MAX_SIZE=0x37690
CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_NAND_DRIVERS=y

View file

@ -22,6 +22,7 @@ CONFIG_OF_BOARD_SETUP=y
CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd"
CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_MISC_INIT_R is not set
CONFIG_SPL_MAX_SIZE=0x36100
CONFIG_SPL_ETH=y
CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
CONFIG_SPL_MTD_SUPPORT=y

View file

@ -26,6 +26,7 @@ CONFIG_BOARD_EARLY_INIT_F=y
# CONFIG_MISC_INIT_R is not set
CONFIG_AVB_VERIFY=y
CONFIG_ANDROID_AB=y
CONFIG_SPL_MAX_SIZE=0x7bc00
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_DMA=y
CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"

View file

@ -29,6 +29,7 @@ CONFIG_BOARD_EARLY_INIT_F=y
# CONFIG_MISC_INIT_R is not set
CONFIG_AVB_VERIFY=y
CONFIG_ANDROID_AB=y
CONFIG_SPL_MAX_SIZE=0x7a8b0
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_DMA=y
CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"

View file

@ -32,6 +32,7 @@ CONFIG_BOARD_EARLY_INIT_F=y
# CONFIG_MISC_INIT_R is not set
CONFIG_AVB_VERIFY=y
CONFIG_ANDROID_AB=y
CONFIG_SPL_MAX_SIZE=0x74eb0
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_DMA=y
CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"

View file

@ -30,6 +30,7 @@ CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000
CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run get_kern_${boot}; run get_fdt_${boot}; run run_kern"
CONFIG_BOARD_LATE_INIT=y
CONFIG_SPL_MAX_SIZE=0x180000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_STACK_R=y

View file

@ -31,6 +31,7 @@ CONFIG_BOOTCOMMAND="run distro_bootcmd"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL_SIZE_LIMIT_SUBTRACT_GD=y
CONFIG_SPL_SIZE_LIMIT_SUBTRACT_MALLOC=y
CONFIG_SPL_MAX_SIZE=0x180000
CONFIG_SPL_SYS_REPORT_STACK_F_USAGE=y
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y

View file

@ -33,6 +33,7 @@ CONFIG_OF_BOARD_SETUP=y
CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd; run init_${boot}; run boot_rprocs; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern"
CONFIG_LOGLEVEL=7
CONFIG_CONSOLE_MUX=y
CONFIG_SPL_MAX_SIZE=0x58000
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_STACK_R=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y

View file

@ -31,6 +31,7 @@ CONFIG_USE_BOOTCOMMAND=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL_SIZE_LIMIT_SUBTRACT_GD=y
CONFIG_SPL_SIZE_LIMIT_SUBTRACT_MALLOC=y
CONFIG_SPL_MAX_SIZE=0x58000
CONFIG_SPL_SYS_REPORT_STACK_F_USAGE=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_SEPARATE_BSS=y

View file

@ -23,6 +23,7 @@ CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_LOAD_FIT_ADDRESS=0x80080000
CONFIG_USE_BOOTCOMMAND=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL_MAX_SIZE=0x58000
CONFIG_SPL_STACK_R=y
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_SPL_EARLY_BSS=y

View file

@ -22,6 +22,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_USE_BOOTCOMMAND=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL_MAX_SIZE=0x58000
CONFIG_SPL_STACK_R=y
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_SPL_EARLY_BSS=y

View file

@ -33,6 +33,7 @@ CONFIG_OF_BOARD_SETUP=y
CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run get_fit_${boot}; run get_overlaystring; run run_fit"
CONFIG_LOGLEVEL=7
CONFIG_CONSOLE_MUX=y
CONFIG_SPL_MAX_SIZE=0x58000
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_STACK_R=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y

View file

@ -28,6 +28,7 @@ CONFIG_SPL_LOAD_FIT=y
# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_USE_BOOTCOMMAND=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL_MAX_SIZE=0x58000
CONFIG_SPL_STACK_R=y
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_SPL_EARLY_BSS=y

View file

@ -23,6 +23,7 @@ CONFIG_BOOTCOMMAND="fatload mmc 0:1 0x71000000 dtb; fatload mmc 0:1 0x72000000 z
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_RESET_PHY_R=y
CONFIG_SPL_MAX_SIZE=0x10000
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot> "
CONFIG_SYS_CBSIZE=256

View file

@ -23,6 +23,7 @@ CONFIG_BOOTCOMMAND="nand read 0x70000000 0x200000 0x300000;bootm 0x70000000"
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_RESET_PHY_R=y
CONFIG_SPL_MAX_SIZE=0x10000
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot> "
CONFIG_SYS_CBSIZE=256

View file

@ -18,6 +18,7 @@ CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="setenv bootargs ${console} ${mtdparts} ${bootargs_mmc};fatload mmc 0:1 0x21000000 dtb;fatload mmc 0:1 0x22000000 uImage;bootm 0x22000000 - 0x21000000"
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_SPL_MAX_SIZE=0x6000
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot> "
CONFIG_SYS_CBSIZE=256

View file

@ -18,6 +18,7 @@ CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="setenv bootargs ${console} ${mtdparts} ${bootargs_nand};nand read 0x21000000 0x180000 0x080000;nand read 0x22000000 0x200000 0x400000;bootm 0x22000000 - 0x21000000"
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_SPL_MAX_SIZE=0x6000
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot> "
CONFIG_SYS_CBSIZE=256

View file

@ -20,6 +20,7 @@ CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="setenv bootargs ${console} ${mtdparts} ${bootargs_nand};sf probe 0; sf read 0x22000000 0x100000 0x300000; bootm 0x22000000"
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_SPL_MAX_SIZE=0x6000
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot> "
CONFIG_SYS_CBSIZE=256

View file

@ -25,6 +25,7 @@ CONFIG_BOOTCOMMAND="sf probe 0; sf read 0x22000000 0x84000 0x294000; bootm 0x220
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_SPL_MAX_SIZE=0x6000
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot> "
CONFIG_SYS_CBSIZE=256

View file

@ -22,6 +22,7 @@ CONFIG_BOOTARGS="mem=128M console=ttyS0,115200 mtdparts=atmel_nand:8M(bootstrap/
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_SPL_MAX_SIZE=0x6000
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot> "
CONFIG_SYS_CBSIZE=256

View file

@ -24,6 +24,7 @@ CONFIG_BOOTCOMMAND="nand read 0x22000000 0x200000 0x600000; nand read 0x21000000
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_SPL_MAX_SIZE=0x6000
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot> "
CONFIG_SYS_CBSIZE=256

View file

@ -26,6 +26,7 @@ CONFIG_BOOTCOMMAND="sf probe 0; sf read 0x22000000 0x100000 0x300000; bootm 0x22
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_SPL_MAX_SIZE=0x6000
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot> "
CONFIG_SYS_CBSIZE=256

View file

@ -26,6 +26,7 @@ CONFIG_SPL_LOAD_FIT_ADDRESS=0x10000000
CONFIG_BOOTDELAY=0
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_CLOCKS=y
CONFIG_SPL_MAX_SIZE=0x40000
CONFIG_SPL_FS_LOAD_KERNEL_NAME="atf-uboot.ub"
CONFIG_SPL_FS_LOAD_ARGS_NAME="u-boot.bin"
CONFIG_SPL_OS_BOOT=y

View file

@ -35,6 +35,8 @@ CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="run flash_self"
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL_MAX_SIZE=0x3e00
CONFIG_SPL_PAD_TO=0x20000
# CONFIG_SPL_LEGACY_IMAGE_FORMAT is not set
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_CRC32=y

View file

@ -27,6 +27,7 @@ CONFIG_BOOTDELAY=3
CONFIG_USE_PREBOOT=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_CLOCKS=y
CONFIG_SPL_MAX_SIZE=0x30000
CONFIG_SPL_STACK_R=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="antminer> "

View file

@ -26,6 +26,7 @@ CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else booti ${loadaddr} - ${fdt_addr}; fi"
CONFIG_LOG=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL_MAX_SIZE=0x1f000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x800

View file

@ -23,6 +23,7 @@ CONFIG_DEFAULT_FDT_FILE="rk3288-veyron-mickey.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_SPL_PAD_TO=0x7f8000
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000

View file

@ -26,6 +26,8 @@ CONFIG_MISC_INIT_R=y
CONFIG_BLOBLIST=y
CONFIG_BLOBLIST_ADDR=0x100000
CONFIG_BLOBLIST_SIZE=0x1000
CONFIG_SPL_MAX_SIZE=0x2e000
CONFIG_SPL_PAD_TO=0x7f8000
CONFIG_HANDOFF=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_SPL_STACK_R=y

View file

@ -24,6 +24,7 @@ CONFIG_LOG=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_SPL_PAD_TO=0x7f8000
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000

View file

@ -27,6 +27,8 @@ CONFIG_MISC_INIT_R=y
CONFIG_BLOBLIST=y
CONFIG_BLOBLIST_ADDR=0x100000
CONFIG_BLOBLIST_SIZE=0x1000
CONFIG_SPL_MAX_SIZE=0x2e000
CONFIG_SPL_PAD_TO=0x7f8000
CONFIG_HANDOFF=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_SPL_STACK_R=y

Some files were not shown because too many files have changed in this diff Show more