Commit graph

15891 commits

Author SHA1 Message Date
Pali Rohár
336a27ab1d arm: mvebu: turris_omnia: Show MCU type in show_board_info()
Different Turris Omnia HW board revisions contains different MCU.
Show type in show_board_info() to easily identify which MCU is populated.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Marek Behún <kabel@kernel.org>
2022-08-09 08:57:23 +02:00
Tom Rini
17ead040d4 Audit <flash.h> inclusion
A large number of files include <flash.h> as it used to be how various
SPI flash related functions were found, or for other reasons entirely.
In order to migrate some further CONFIG symbols to Kconfig we need to
not include flash.h in cases where we don't have a NOR flash of some
sort enabled.  Furthermore, in cases where we are in common code and it
doesn't make sense to try and further refactor the code itself in to new
files we need to guard this inclusion.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-04 16:18:47 -04:00
Tom Rini
1d3ecdac7e Convert CONFIG_FLASH_CFI_LEGACY to Kconfig
This converts the following to Kconfig:
   CONFIG_FLASH_CFI_LEGACY

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-04 16:18:47 -04:00
Tom Rini
5d68d2f41d Convert CONFIG_SYS_FLASH_ERASE_TOUT et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_FLASH_ERASE_TOUT
   CONFIG_SYS_FLASH_LOCK_TOUT
   CONFIG_SYS_FLASH_UNLOCK_TOUT
   CONFIG_SYS_FLASH_WRITE_TOUT

In practice, for two m68k platforms we move to hard-coding with a
comment the timeout values, rather than try and make convoluted Kconfig
logic.  We add options for the write and erase options to the pic32
flash driver, as this driver does make use of them.  Everywhere else
these are unreferenced values.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-04 16:18:47 -04:00
Tom Rini
e2eca3e5c2 P1010RDB: Drop support for not-CONFIG_SYS_DDR_RAW_TIMING
All platforms today define CONFIG_SYS_DDR_RAW_TIMING, so drop the code
for this option being unset.

Cc: Qiang Zhao <qiang.zhao@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-04 16:18:47 -04:00
Tom Rini
90df583c64 malta: Switch to using CONFIG_SYS_SDRAM_SIZE
This is the only platform defining and using CONFIG_SYS_MEM_SIZE, switch
to using CONFIG_SYS_SDRAM_SIZE for consistency.

Cc: Paul Burton <paul.burton@mips.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-04 16:18:47 -04:00
Tom Rini
9a56ab96aa powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE
We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount
main memory available.  Rework CONFIG_SYS_DDR_SIZE, which described a
size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often
used as a number of bytes.  Use shifts of this option when required.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-04 16:18:47 -04:00
Quentin Schulz
58d258c8c4 imx: imx8mp_rsb3720a1: fix incorrect ifdef check on SPL_MMC
Since commit 103c5f1806 ("mmc: Rename MMC_SUPPORT to MMC"),
SPL_MMC_SUPPORT is named SPL_MMC, so let's fix the ifdef.

Fixes: fbc6b14143 ("imx: imx8mp_rsb3720a1: convert to DM_SERIAL")
Cc: Quentin Schulz <foss+uboot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
2022-08-04 15:32:20 -04:00
Tom Rini
85eb5ac6ef Merge tag 'fsl-qoriq-2022-7-29' of https://source.denx.de/u-boot/custodians/u-boot-fsl-qoriq
mpc85xx: support for generating QorIQ pre-PBL eSDHC boot sector
p1_p2_rdb_pc: Remove I-flag from second L2 SRAM mapping
p1_p2_rdb_pc: Fix parsing inverted bits from boot input data
p1_p2_rdb_pc: Simplify SPL offset macros
2022-07-31 21:08:50 -04:00
Pali Rohár
78aa3fb15e board: freescale: p1_p2_rdb_pc: Fix parsing inverted bits from boot input data
On some boards upper 4 bits of i2c boot input data (register 0) are
inverted. Information which bits are inverted is stored in register 2.

So invert read input data back according to register 2 prior processing
them. This fixes printing "rom_loc: value" line during booting.

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-29 19:49:13 +08:00
Pali Rohár
3480879a55 board: freescale: p1_p2_rdb_pc: Remove I-flag from second L2 SRAM mapping
U-Boot for initial L2 SRAM uses L2 memory-mapping mode and not L2 with
locked lines. P2020 reference manual about L2 memory-mapping mode says:

  Accesses to memory-mapped SRAM are cacheable only in the corresponding
  e500 L1 caches.

So there is no need to set Caching-Inhibit I-bit for second part of initial
L2 SRAM mapping in TLB entry. Remove it. First part of initial L2 SRAM
mapping already does not have I-bit set.

For more details see also:
https://lore.kernel.org/u-boot/20220508150844.qqxg452rs4wtf5bs@pali/

Signed-off-by: Pali Rohár <pali@kernel.org>
2022-07-29 19:49:13 +08:00
Pali Rohár
5e4d24ccc1 gpio: Add Turris Omnia MCU driver
This driver registers GPIO controller and allows U-Boot to control GPIO
pins on MCU which is connected to Turris Omnia via i2c.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-07-29 10:02:43 +02:00
Tom Rini
7277c4bddc minor dm- and fdt-related fixes
start of test for fdt command
 -----BEGIN PGP SIGNATURE-----
 
 iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAmLgRtERHHNqZ0BjaHJv
 bWl1bS5vcmcACgkQfxc6PpAIreYXFwgAlALOMj3bwwsIAXNa5j/hPb3j/ecIqXgn
 ocyxN+U5eSb2Ju5Jc9QmSeUMnGrii9+PW9j0JApdHrbUgBI2Sx+zwqMTIfA+BS05
 4xXZgk5jOT+we2489FjgFcplv+dIuVlsB/Zo6zTbZyjkobfilYsZEGYHJ/CYNaIH
 n7EmZeby1cXL7DMCxT39d3hD43XSX8cqQ1IIiF9DgtHQYs2Ff8dFcbWArSdgLX3o
 Eob2Qj/GjScg87zjZcsgZajWJMHUfMeD5ZiKN2fR0T/wOdO1WtzFoF2Mt8KZcW1j
 BD1shgBCMSSl5EgRG1BQZw4Sa92W2IBlbJ9tfIh8qnWOzEBzOs/M6w==
 =lsO4
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-26jul22' of https://gitlab.denx.de/u-boot/custodians/u-boot-dm.git

minor dm- and fdt-related fixes
start of test for fdt command
2022-07-27 06:59:55 -04:00
Tom Rini
86feeab3dc u-boot-imx-20220726
-------------------
 
 i.MX for 2022.10
 
 - Added i.MX93 architecture
 
 CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/12891
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCYt/zWg8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76YODwCgh3JIzIi9pktCxKumx4JRS6UzwgsAn3HoXKI/
 2OEUjST1X/TI/lMFp0bw
 =EWT6
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20220726' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

u-boot-imx-20220726
-------------------

i.MX for 2022.10

- Added i.MX93 architecture

CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/12891
2022-07-26 10:26:00 -04:00
Peng Fan
481f96068e board: freescale: imx93_evk: support ethernet
Add ethernet support

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26 11:29:01 +02:00
Peng Fan
feaf8e0cf0 imx: imx93_evk: Set ARM clock to 1.7Ghz
Set ARM clock to OD frequency 1.7Ghz, since we have set PMIC VDD_SOC
to Overdrive voltage 0.9V

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26 11:29:01 +02:00
Peng Fan
86a179703c imx: imx93_evk: Add basic board support
Add basic board codes and defconfig for i.MX93 11x11 EVK board.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26 11:29:01 +02:00
Ye Li
03fcf96651 misc: imx: S400_API: Move S400 MU and API to a common place
Since iMX9 uses S401 which shares the API with iMX8ULP. So move S400
MU driver and API to a common place and selected by CONFIG_IMX_SENTINEL

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26 11:29:00 +02:00
Simon Glass
281996110c addrmap: Support on sandbox
Update this feature so that it works on sandbox, using a basic identity
mapping. This allows us to run the 'ut addrmap' test.

Also fix up the test to use the correct macros to access the linker
list, so that the 'ut addrmap' command actually works.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-07-26 02:30:56 -06:00
Oleksandr Suvorov
d7fcbfc19b fpga: xilinx: add bitstream flags to driver desc
Store a set of supported bitstream types in xilinx_desc structure.
It will be used to determine whether an FPGA image is able to be
loaded with a given driver.

Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
Tested-by: Ricardo Salveti <ricardo@foundries.io>
Tested-by: Adrian Fiergolski <adrian.fiergolski@fastree3d.com>
Link: https://lore.kernel.org/r/20220722141614.297383-4-oleksandr.suvorov@foundries.io
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-07-26 09:34:21 +02:00
Michal Simek
4a1bfcd7aa xilinx: common: Use strlcpy instead of strncpy
It is recommendation done by checkpatch to all the time have \0 terminated
strings.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/c7bfab50c40f6213f1b347b5e4674e382e83cb94.1658413156.git.michal.simek@amd.com
2022-07-26 08:25:16 +02:00
Michal Simek
ee5a4b87a1 xilinx: Wire uuid reading from FRU
UUID is already recorded when FRU is parsed but it is not copied to local
structures and exported to variable that's why simply add it.
Data is saved in binary format but there must be conversion to string for
exporting it to variable and string should be in uuid format too.

One way how to use it directly is to setup pxeuuid based on it. For
example via preboot with "setenv pxeuuid ${board_uuid}"

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/1dfa4b4220a508abc05351da2119880811b77612.1658413156.git.michal.simek@amd.com
2022-07-26 08:25:16 +02:00
Ashok Reddy Soma
65168910ad zynqmp: Run board_get_usable_ram_top() only on main U-Boot
With commit ce39ee28ec ("zynqmp: Do not place u-boot to reserved memory
location"), the function board_get_usable_ram_top() is allocating
MMU_SECTION_SIZE of about 2MB using lmb_alloc(). But we dont have this
much memory in case of mini U-Boot.

Keep these functions which use lmb under CONFIG_LMB so that they are
compiled and used only when LMB is enabled.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/75e52def75f573e554a6b177a78504c128cb0c4a.1657183534.git.michal.simek@amd.com
2022-07-26 08:23:54 +02:00
Andrew Davis
80b93bb71c arm: mach-k3: Rename SOC_K3_AM6 to SOC_K3_AM654
The first AM6x device was the AM654x, but being the first we named it
just AM6, since more devices have come out with this same prefix we
should switch it to the normal convention of using the full name of the
first compatibility device the series. This makes what device we are
talking about more clear and matches all the K3 devices added since.

Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2022-07-25 13:02:04 -04:00
Andrew Davis
3289c806d3 board: ti: am65x: Do not disable SA2UL in DT
This is no longer needed as the SA2UL can now be shared with Linux.
Leave the SA2UL DT node enabled.

Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2022-07-25 13:02:04 -04:00
Sumit Garg
bf95d17809 board: qualcomm: Add support for QCS404 EVB
Add support for Qualcomm QCS404 SoC based evaluation board.

Features:
- Qualcomm Snapdragon QCS404 SoC
- 1GiB RAM
- 8GiB eMMC, uSD slot

U-boot is chain loaded by ABL in 64-bit mode as part of boot.img.
For detailed build and boot instructions, refer to
doc/board/qualcomm/qcs404.rst.

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
2022-07-25 13:02:04 -04:00
Sumit Garg
d35b211374 board: qualcomm: Add support for dragonboard845c
Add support for 96Boards Dragonboard 845C aka Robotics RB3 development
platform. This board complies with 96Boards Open Platform Specifications.

Features:
- Qualcomm Snapdragon SDA845 SoC
- 4GiB RAM
- 64GiB UFS drive

U-boot is chain loaded by ABL in 64-bit mode as part of boot.img.
For detailed build and boot instructions, refer to
doc/board/qualcomm/sdm845.rst, board: dragonboard845c.

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2022-07-25 13:02:04 -04:00
Paul Barker
390d9e2c8c board: ti: am335x: Use correct dtbs for SanCloud boards
We have different dtbs for the Lite and Extended WiFi variants of the
SanCloud BBE.

Signed-off-by: Paul Barker <paul.barker@sancloud.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2022-07-25 13:02:03 -04:00
Paul Barker
21acb843db board: ti: am335x: Enable spi0 bus on SanCloud BBE Lite
The SanCloud BBE Lite has a Micron Authenta flash device connected to
the spi0 bus.

Signed-off-by: Paul Barker <paul.barker@sancloud.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2022-07-25 13:02:03 -04:00
Marcel Ziswiler
87c4601c57 board: toradex: apalis-imx8: fix file names in maintainers
Fix device tree file names in MAINTAINERS file.

Fixes: 3d60366500 ("board: toradex: add apalis imx8qm 4gb wb it v1.0b module support")
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-07-25 16:12:01 +02:00
Marcel Ziswiler
e6ad8070a7 verdin-imx8mp: synchronise device tree with linux
Synchronise device tree with linux v5.19-rc5.

Please note that this also means that instead of the previous "generic"
U-Boot specific carrier board agnostic device tree we are now using the
regular one for the Verdin Development (carrier) board (e.g.
imx8mp-verdin-wifi-dev.dtb rather than the previous imx8mp-verdin.dtb).

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-07-25 16:12:01 +02:00
Marcel Ziswiler
4e5114daf9 imx8mn: synchronise device tree with linux
Synchronise device tree with linux v5.19-rc5.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-07-25 16:12:00 +02:00
Marcel Ziswiler
a68bad0a37 imx8mm-mx8menlo/verdin-imx8mm: synchronise device tree with linux
Synchronise device tree with linux v5.19-rc5.

Please note that this also means that instead of the previous "generic"
U-Boot specific carrier board agnostic device tree we are now using the
regular one for the Verdin Development (carrier) board (e.g.
imx8mm-verdin-wifi-dev.dtb rather than the previous imx8mm-verdin.dtb).

Please further note that the PMIC node name got changed from a pmic
label to pmic@25 which required adjustment in resp. board SPL file
board/toradex/verdin-imx8mm/spl.c.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-07-25 16:12:00 +02:00
Marcel Ziswiler
b4052d55ad colibri_vf: synchronise device tree with linux
Synchronise device tree with linux v5.19-rc5.

Please note that this also means that instead of the previous "generic"
U-Boot specific carrier board agnostic device tree we are now using the
regular one for the Colibri Evaluation (carrier) board V3 (e.g.
vf610-colibri-eval-v3.dtb rather than the previous vf610-colibri.dtb).

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-07-25 16:12:00 +02:00
Marcel Ziswiler
25ab97986c colibri-imx7d/-emmc: synchronise device tree with linux
Synchronise device tree with linux-next next-20220708.

Please note that this also means that instead of the previous "generic"
U-Boot specific carrier board agnostic device trees we are now using the
regular ones for the Colibri Evaluation (carrier) board V3 (e.g.
imx7d-colibri-eval-v3.dtb rather than the previous
imx7-colibri-rawnand.dtb and imx7d-colibri-emmc-eval-v3.dtb rather than
the previous imx7-colibri-emmc.dtb).

Please further note that the PMIC node name got changed from rn5t567@33
to pmic@33 which required adjustment in resp. board file
board/toradex/colibri_imx7/colibri_imx7.c.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-07-25 16:12:00 +02:00
Marcel Ziswiler
c21b61bff1 colibri-imx6ull/-emmc: synchronise device tree with linux
Synchronise device tree with linux v5.19-rc5.

Please note that this also means that instead of the previous "generic"
U-Boot specific carrier board agnostic device trees we are now using the
regular ones for the Colibri Evaluation (carrier) board V3 (e.g.
imx6ull-colibri-eval-v3.dtb rather than the previous imx6ull-colibri.dtb
and imx6ull-colibri-emmc-eval-v3.dtb rather than the previous
imx6ull-colibri-emmc.dtb).

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-07-25 16:12:00 +02:00
Marcel Ziswiler
bd483b7a9f colibri_imx6: synchronise device tree with linux
Synchronise device tree with linux-next next-20220708.

Please note that this also means that instead of the previous "generic"
U-Boot specific carrier board agnostic device tree we are now using the
regular one for the Colibri Evaluation (carrier) board V3 (e.g.
imx6dl-colibri-eval-v3.dtb rather than the previous imx6-colibri.dtb).

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-07-25 16:12:00 +02:00
Marcel Ziswiler
50ba171e2d apalis_imx6: synchronise device tree with linux
Synchronise device tree with linux-next 20220706.

Please note that this also means that instead of the previous "generic"
U-Boot specific carrier board agnostic device tree we are now using the
regular one for the Apalis Evaluation (carrier) board (e.g.
imx6q-apalis-eval.dtb rather than the previous imx6-apalis.dtb).

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-07-25 16:12:00 +02:00
Francesco Dolcini
abe52f58bc toradex: common: Improve product/serial print during boot
Add product id print in show_board_info(), with an increasing number of
Toradex SKUs available with small differences it makes sense to print it.

Move serial number print to a dedicated line, this prevents the previous
line with the product name to overflow the 80 columns with any
reasonable product name length.

Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
2022-07-25 16:12:00 +02:00
Francesco Dolcini
4f0c33c46d toradex: tdx-cfg-block: Use official SKU names
Up to now in the code we named Toradex SKUs in a slightly different way
compared to the official product name, start using the official names
from now on to avoid misunderstanding.

This has also the nice benefit of the string being shorter, allowing
to fit nicely in 80 columns even adding the product ID when printing
the hardware information.

Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
2022-07-25 16:12:00 +02:00
Francesco Dolcini
9762fbeea4 toradex: common: Remove #ifdef usage for 2nd ethaddr
Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)`
instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`.

Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
2022-07-25 16:12:00 +02:00
Francesco Dolcini
0d4b692c80 toradex: common: Remove stale function declaration
Remove stale show_boot_logo() declaration, not used anywhere.

Fixes: e6fd30dd9e ("toradex: drop legacy show_boot_logo function and use splashscreen")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
2022-07-25 16:12:00 +02:00
Francesco Dolcini
8b6dc5d394 toradex: tdx-cfg-block: Cleanup interactive cfg block creation
Simplify interactive config block creation code, instead of having a
a long list of questions and a complex tree of preprocessor directive to
guess the exact SKU, just ask the user to select it from a list.

The modules list is filtered out to include only SKUs that are supported
by the specific u-boot binary in execution.

Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
2022-07-25 16:12:00 +02:00
Francesco Dolcini
cdc39c6aae toradex: common: Use ARRAY_SIZE macro
Use generally available ARRAY_SIZE macro, instead of hand-coding it
every time is needed.

Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
2022-07-25 16:12:00 +02:00
Francesco Dolcini
ea1dc32f31 toradex: common: Remove stale comments about modules availability
Remove comment "not currently on sale" on specific SKUs, this
information does not belong to the code and will never be accurate.

Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
2022-07-25 16:12:00 +02:00
Philippe Schenker
a2da29a4e2 toradex: tdx-cfg-block: add 0068 i.mx 8m mini sku
Add new i.MX 8M Mini SKU to ConfigBlock handling.

0068: Verdin iMX8M Mini Quad 2GB WB IT No CAN

This SKU is identical to 0055 but without CAN. Mention this in the name
so those modules can be distinguished.

Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
2022-07-25 16:12:00 +02:00
Mamta Shukla
eca5e000d3 board: freescale: Add entry for imx8mm_evk_fspi_defconfig
Add entry for imx8mm_evk_fspi_defconfig in
board/freescale/imx8mm_evk/MAINTAINERS

Signed-off-by: Mamta Shukla <mamta.shukla@leica-geosystems.com>
Signed-off-by: Thomas Haemmerle <thomas.haemmerle@leica-geosystems.com>
Tested-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-07-25 15:35:35 +02:00
Mamta Shukla
99a6ff5911 board: freescale: Add QSPI Boot support in spl for i.MX8m
Add QSPI Boot option in u-boot-spl for i.MX8m EVK.

Signed-off-by: Mamta Shukla <mamta.shukla@leica-geosystems.com>
Signed-off-by: Thomas Haemmerle <thomas.haemmerle@leica-geosystems.com>
Tested-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-07-25 15:35:35 +02:00
Mamta Shukla
3c7ad8c40e configs: Add config for enabling FSPI boot option for i.MX8m
Add imx8mm_evk_fspi_defconfig to build QSPI boot image.
This config is based on imx8mm_evk_defconfig with addtional config options to
define FSPI Header parameters required to generate QSPI Header.
Update SPL offset to include header size  and overwrite IMX_CONFIG to use
lpddr.cfg for FSPI.

Signed-off-by: Mamta Shukla <mamta.shukla@leica-geosystems.com>
Signed-off-by: Thomas Haemmerle <thomas.haemmerle@leica-geosystems.com>
Tested-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Andrey Zhizhikin  <andrey.zhizhikin@leica-geosystems.com>
2022-07-25 15:35:35 +02:00
Josua Mayer
6cf1cc987f mx6cuboxi: fix board detection while patching device-tree phy nodes
ft_board_setup relies on the board_type() function to optimize which phy
nodes need to be enabled for Linux.
Add calls to setup and release the board-detect GPIOs.

Also fix the switch-case statement to only enable phy address 4 for
Cubox and unknown devices.

Fixes: 741ce308 ("mx6cuboxi: fixup dtb ethernet phy nodes before booting an OS")
Signed-off-by: Josua Mayer <josua@solid-run.com>
2022-07-25 15:08:23 +02:00
Marek Behún
61143f741e treewide: Fix Marek's name and change my e-mail address
Fix diacritics in some instances of my name and change my e-mail address
to kabel@kernel.org.

Add corresponding .mailmap entries.

Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-07-21 10:14:04 +02:00
Marek Behún
8a7880f0c1 board: turris: Fix MAINTAINERS and add Pali
Fix MAINTAINERS files for Turris devices, add missing files and add Pali
as maintainer.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-07-21 10:14:04 +02:00
Robert Marko
040978ae4f MAINTAINERS: add myself as Methode maintainer
I am currently maintaing the Methode uDPU and eDPU boards so add myself
as the maintainer for them.

Remove the old entry from board/Marvell/mvebu_armada-37xx/MAINTAINERS.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-07-21 10:14:04 +02:00
Pali Rohár
e33879a45e board: turris: Find atsha device by atsha driver
It does not matter what is DT node name of atsha device. So find it via
atsha driver and not by DT node name.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-07-21 07:46:10 +02:00
Weijie Gao
0eaee027f7 mips: mtmips: add two reference boards for mt7621
The mt7621_rfb board supports integrated giga PHYs plus one external
giga PHYs. It also has up to 512MiB DDR3, 16MB SPI-NOR, 3 mini PCI-e x1
slots, SDXC and USB.

The mt7621_nand_rfb board is almost the same as mt7621_rfb board, but it
uses NAND flash and SDXC is not available.

Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2022-07-13 23:03:37 +02:00
Tom Rini
36b661dc91 Merge branch 'next' 2022-07-11 14:58:57 -04:00
Tom Rini
07ef80cd9d powerpc: Use the poison value of 0xdeadbeef directly in DDR init
On p1_p2_rdb_pc platforms, we set ddr_data_init to the "poison" value of
0xdeadbeef rather than a real calculated / derived value.  Do this
directly and comment rather than via CONFIG.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-08 17:57:34 -04:00
Tom Rini
ba39d90728 legoev3: Migrate to DM_I2C
Perform a basic migration of the calls in setup_serial_number() to DM so
that we can switch to using DM_I2C on this platform.

Cc: David Lechner <david@lechnology.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: David Lechner <david@lechnology.com>
2022-07-08 17:57:34 -04:00
Tom Rini
d9c4d66aef kmcoge5ne: Move BFTIC3 CONFIG references to their usage
We only reference CONFIG_SYS_BFTIC3_BASE in one location.  Move the
comment to where we reference it, and use the value directly.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Holger Brunck <holger.brunck@hitachienergy.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2022-07-07 14:01:09 -04:00
Philippe Schenker
1cf4e79f57 toradex: tdx-cfg-block: add new toradex oui range
Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change
we extend the possible serial-numbers as follows:

For serial-numbers 00000000-16777215 OUI 00:14:2d is taken
For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken

Lower 24-bit of the serial number are used in the NIC part of the
MAC address, the complete serial number can be calculated using the OUI.

Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-07-06 14:30:51 -04:00
Nishanth Menon
a58147c2db board: ti: common: board_detect: Do 1byte address checks first.
Do 1 byte address checks first prior to doing 2 byte address checks.
When performing 2 byte addressing on 1 byte addressing eeprom, the
second byte is taken in as a write operation and ends up erasing the
eeprom region we want to preserve.

While we could have theoretically handled this by ensuring the write
protect of the eeproms are properly managed, this is not true in case
where board are updated with 1 byte eeproms to handle supply status.

Flipping the checks by checking for 1 byte addressing prior to 2 byte
addressing check prevents this problem at the minor cost of additional
overhead for boards with 2 byte addressing eeproms.

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2022-07-06 14:30:08 -04:00
Nishanth Menon
bc1de48371 board: ti: common: Handle the legacy eeprom address width properly
Due to supply chain issues, we are starting to see a mixture of eeprom
usage including the smaller 7-bit addressing eeproms such as 24c04
used for eeproms.

These eeproms don't respond well to 2 byte addressing and fail the
read operation. We do have a check to ensure that we are reading the
alternate addressing size, however the valid failure prevents us
from checking at 1 byte anymore.

Rectify the same by falling through and depend on header data comparison
to ensure that we have valid data.

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2022-07-06 14:30:08 -04:00
Nishanth Menon
8b5218e7cb board: ti: common: Optimize boot when detecting consecutive bad records
The eeprom data area is much bigger than the data we intend to store,
however, with bad programming, we might end up reading bad records over
and over till we run out of eeprom space. instead just exit when 10
consecutive records are read.

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2022-07-06 14:30:08 -04:00
Georgi Vlaev
4c092bb306 board: ti: am62x: Account for DDR size fixups if ECC is enabled
Call into k3-ddrss driver to fixup device tree and resize
the available amount of DDR if ECC is enabled.

A second fixup is required from A53 SPL to take the fixup
as done from R5 SPL and apply it to DT passed to A53 U-boot,
which in turn passes this to the OS.

Signed-off-by: Georgi Vlaev <g-vlaev@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2022-07-06 14:30:08 -04:00
Georgi Vlaev
249e9f3d19 board: ti: am62x: Use fdt functions for ram and bank init
Use the appropriate fdtdec_setup_mem_size_base() call in
dram_init() and fdtdec_setup_bank_size() in dram_bank_init()
to pull these values from DT, where they are already available,
instead of hardcoding them.

Signed-off-by: Georgi Vlaev <g-vlaev@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2022-07-06 14:30:08 -04:00
Philippe Schenker
7e27ce16c5 toradex: tdx-cfg-block: extend assembly version
There are two decimal digits reserved to encode the module version and
revision. This code so far implemented A-Z which used 0-25 of this
range.
This commit extends the range to make use of all 99 numbers. After
capital letters the form with a hashtag and number (e.g. #26) is used.

Examples:

If the assembly version is between zero and 25 the numbering is as follows,
as it also has been before this commit:
0: V0.0A
1: V0.0B
...
25: V0.0Z

New numbering of assembly version:
If the number is between 26 and 99 the new assembly version name is:
26: V0.0#26
27: V0.0#27
...
99: V0.0#99

Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-07-06 14:30:08 -04:00
Philippe Schenker
494ef10c3b toradex: tdx-cfg-block: use defines for string length
With those defines the length can be reused and is in one place
extendable.

Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-07-06 14:30:08 -04:00
Philippe Schenker
39ff0624bc toradex: tdx-cfg-block: use only snprintf
Prevent memory issues that could appear with sprintf. Replace all
sprintf occurences with snprintf.

Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-07-06 14:30:08 -04:00
Aswath Govindraju
e0392596e9 board: ti: j721e: Return if there is an error while configuring SerDes
While configuring SerDes, errors could be encountered, in these cases,
return instead of going ahead. This is will help in booting even if
configuration of SerDes fails.

Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
2022-07-06 14:30:08 -04:00
Tom Rini
604c62f511 qemu-ppce500: Move CONFIG_SYS_PCI_MAP_{START, END} to board code
These CONFIG options are only used on this board, in the board file
itself.  Remove these from the CONFIG namespace and define in the board
file.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:05:00 -04:00
Tom Rini
1bc8ef4d70 socrates: Rework CONFIG_PCI_CLK_FREQ
The symbol CONFIG_PCI_CLK_FREQ is local to this board.  Provide equal
clarity in the code by referencing the numeric value directly and move
the explanatory comment to the code, just prior to use.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:05:00 -04:00
Tom Rini
3dc2987f5c Convert CONFIG_PCIE1 et al to Kconfig
This converts the following to Kconfig:
   CONFIG_PCIE1
   CONFIG_PCIE2
   CONFIG_PCIE3
   CONFIG_PCIE4
   CONFIG_PCI1

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:04:59 -04:00
Tom Rini
f4cd75e96a powerpc: Clean up CHAIN_OF_TRUST related options
As things stand currently, there is only one PowerPC platform that
enables the options for CHAIN_OF_TRUST.  From the board header files,
remove a number of never-set options.  Remove board specific values from
arch/powerpc/include/asm/fsl_secure_boot.h as well.  Rework
include/config_fsl_chain_trust.h to not abuse the CONFIG namespace for
constructing CHAIN_BOOT_CMD.  Migrate all of the configurable addresses
to Kconfig.

If any platforms are re-introduced with secure boot support, everything
required should still be here, but now in Kconfig, or requires migration
of an option to Kconfig.

Cc: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:04:15 -04:00
Tom Rini
5aad0a14ba fsl_validate: Migrate SPL_UBOOT_KEY_HASH to Kconfig
Move setting of SPL_UBOOT_KEY_HASH to a non-NULL value to Kconfig.  As
part of this, change fsl_secboot_validate(...) to check that it is
passed a non-empty string, rather than non-NULL.

Cc: Peng Fan <peng.fan@nxp.com>
Cc: Priyanka Jain <priyanka.jain@nxp.com>
Cc: Kshitiz Varshney <kshitiz.varshney@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:04:01 -04:00
Tom Rini
540b73a7be arch/Kconfig.nxp: Re-organize slightly
Make all of the CHAIN_OF_TRUST options be under a single menu and add a
comment for the rest, so the resulting config file reads more clearly.
Remove duplicate CHAIN_OF_TRUST options from
board/congatec/common/Kconfig.  Remove duplicate NXP_ESBC config
questions and move to arch/Kconfig.nxp.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:04:01 -04:00
Tom Rini
7e7d04aecb Convert CONFIG_ESDHC_DETECT_QUIRK to Kconfig
This converts the following to Kconfig:
   CONFIG_ESDHC_DETECT_QUIRK

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:03:46 -04:00
Tom Rini
d622b08923 nxp: Rename board/freescale/common/Kconfig to arch/Kconfig.nxp
Now that board/freescale/common/Kconfig is safe to be included once,
globally, rename this to arch/Kconfig.nxp to better reflect that it
contains options that are valid on multiple architectures and SoC
families, and not specific to NXP reference platforms either.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:03:02 -04:00
Tom Rini
93145335fb nxp: Make board/freescale/common/Kconfig safe to include once in arch/Kconfig
The way that we use this file currently means that we have to guard it
in every platform Kconfig.  But it is also required in all NXP
platforms, including non-reference platforms.  Make all options in it
have appropriate dependencies so that we can include it a single time
under arch/Kconfig

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:03:02 -04:00
Tom Rini
f96096d0dc Convert CONFIG_EXTRA_CLOCK to Kconfig
This converts the following to Kconfig:
   CONFIG_EXTRA_CLOCK

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:03:01 -04:00
Tom Rini
de0a732915 Rename CONFIG_PWM to CONFIG_PWM_S5P and move to Kconfig
We rename the S5P specific "CONFIG_PWM" to CONFIG_PWM_S5P and move it to
Kconfig.  Given the usage of CONFIG_PWM_NX, we have that select this new
symbol.

Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2022-07-05 17:03:01 -04:00
Pali Rohár
6b74cfdcee board: freescale: p1_p2_rdb_pc: Remove mapping for TDM-PMC card
From whole P1/P2 family of RDB boards is TDM-PMC card (PCI Mezzanine Card,
Freescale PQ-MDS-T1) available only on P1021RDB and P1025RDB boards.

So address mapping for TDM-PMC card on LBC should not be enabled on any
other P1/P2 RDB board as there is no device at that TDM-PMC address.

Support for P1021RDB and P1025RDB boards was already removed from mainline
U-Boot in commits 6d1dd76afe ("board/freescale: Remove P1021RDB board
support") and d521cece5a ("board/freescale: Remove P1025RDB board
support").

So do not enable TDM-PMC address mapping on remaining P1/P2 RDB boards and
remove all macros related to TDM-PMC address mappings.

Signed-off-by: Pali Rohár <pali@kernel.org>
2022-07-03 15:13:51 +08:00
Pali Rohár
2c0073aadd board: freescale: p1_p2_rdb_pc: Allow to compile without __SW_BOOT_SD macro
Add #ifdef guard for __SW_BOOT_SD macro like there are guards for all other
__SW_BOOT_* macros.

Signed-off-by: Pali Rohár <pali@kernel.org>
2022-07-03 15:13:51 +08:00
Pali Rohár
f7b4db358c board: freescale: p1_p2_rdb_pc: Allow to compile without BOARD_NAME
Signed-off-by: Pali Rohár <pali@kernel.org>
2022-07-03 15:13:51 +08:00
Hannes Schmelzer
04b26c9896 board/BuR/*: replace maintainer of BuR boards
Since I'm leaving the company with end of June, the maintainership will
be transferred to Wolfgang Wallner.

Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
Signed-off-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2022-07-01 16:00:36 -04:00
Tom Rini
936d468b7b chameleonv3: Add MAINTAINERS file
This file was missing, add.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-01 15:55:54 -04:00
Paweł Anikiel
813c800107 board: Add Chameleonv3 board dir
Add board directory for Google Chameleon V3 board

Signed-off-by: Paweł Anikiel <pan@semihalf.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-07-01 14:57:14 +08:00
Tom Rini
284c1a9b4b First set of u-boot-at91 features for the 2022.10 cycle
-----BEGIN PGP SIGNATURE-----
 
 iQFQBAABCgA6FiEEqxhEmNJ6d7ZdeFLIHrMeAg6sL8gFAmK9nEUcHGV1Z2VuLmhy
 aXN0ZXZAbWljcm9jaGlwLmNvbQAKCRAesx4CDqwvyEu0B/4v1EQOMBL+VXns8Ipo
 Xeq+RDUX/24XcB5s6sTcNlWzvYuX6Z7DCGJ0loK5JxelrOy+YNkRbTRMom1eW9Kn
 9dmKa0bcO7auJEww3Nln1IFyx+FXQFGR1V3g1U4535l8b7urTioIK0MUSrG/GLpe
 Rlbh31GAYtrGvl06W1F7mwhg7/0AT8IhUFaY9G7s7gKA5muGQQ7ED4nKVoZPeTAl
 lrQ/Ecym1ND7aOhd/vuEBtgoGxDWzwf8piT8qykJluJKzBV1Hic0RXCNBmtrTORz
 b1GOOpRUgcnTv9U8j4PRyYGKDnmS2OmV2AwL8+V9UJfJgQrkcRlbgpCysIPmMBzo
 YPRt
 =D79P
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-at91-2022.10-a' of https://source.denx.de/u-boot/custodians/u-boot-at91 into next

First set of u-boot-at91 features for the 2022.10 cycle:

This feature set includes mostly fixes and alignments: DT alignment with
Linux for sama7g5, removal of invalid eeprom compatibles, removal of
extra debug_uart_init calls for all at91 boards, support for pio4 driver
pioE bank, and other minor fixes and enhancements for sam9x60 and
sama5d2_icp boards.
2022-06-30 15:21:52 -04:00
Tom Rini
613c326581 gw_ventana: Migrate to using CONFIG_EXTRA_ENV_TEXT
Move the environment text over from being set via
CONFIG_EXTRA_ENV_SETTINGS in include/configs/gw_ventana.h and over
to plain text in board/gateworks/gw_ventana/gw_ventana.env.  This lets
us drop CONFIG_EXTRA_ENV_SETTINGS_COMMON as everything resides in a
single environment file now.

Cc: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Tim Harvey <tharvey@gateworks.com>
2022-06-28 17:11:49 -04:00
Tom Rini
d8564e919d opos6uldev: Migrate to using CONFIG_EXTRA_ENV_TEXT
Move the environment text over from being set via
CONFIG_EXTRA_ENV_SETTINGS in include/configs/opos6uldev.h and over to
plain text in board/armadeus/opos6uldev/opos6uldev.env.  This lets us
manage env_version without a CONFIG variable.

Cc: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:11:48 -04:00
Tom Rini
5c3f6a3206 dragonboard410c: Migrate to using CONFIG_EXTRA_ENV_TEXT
With the exception of distro_boot support, we can move all of the rest
of the environment changes to come from CONFIG_EXTRA_ENV_TEXT and in
turn remove CONFIG_ENV_REFLASH.

Cc: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:11:48 -04:00
Tom Rini
60d45642fe fpga: Remove CONFIG_FPGA_COUNT
This define is only currently used in a single board, and always set to
one.  Define this within the board code and remove other references.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:11:48 -04:00
Tom Rini
3a21d45d33 siemens: Move CONFIG_FACTORYSET to Kconfig
Introduce board/siemens/common/Kconfig and have it hold FACTORYSET to
start with.  Use select for this on the boards that need it.

Cc: Anatolij Gustschin <agust@denx.de>
Cc: Samuel Egli <samuel.egli@siemens.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:04:38 -04:00
Tom Rini
24ec3dea4b arm: samsung: Migrate a number of symbols to Kconfig
- In a number of cases, use CONFIG_ARCH_EXYNOS[45] rather than
  CONFIG_EXYNOS[45]
- In other cases, test for CONFIG_ARCH_EXYNOS or CONFIG_ARCH_S5PC1XX
- Migrate specific SoC CONFIG values to Kconfig
- Use CONFIG_TARGET_x rather than CONFIG_x
- Migrate other CONFIG_EXYNOS_x symbols to Kconfig
- Reference CONFIG_EXYNOS_RELOCATE_CODE_BASE directly as EXYNOS_RELOCATE_CODE_BASE
- Rename CONFIG_S5P_PA_SYSRAM to CONFIG_SMP_PEN_ADDR to match the rest
  of U-Boot usage.

Cc: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:04:37 -04:00
Tom Rini
dc2d27ae72 arm: samsung: Remove dead LCD code
Since bb5930d5c9 ("exynos: video: Convert several boards to driver
model for video") there have been no callers of any of the exynos_lcd_*
family of functions.  Remove these from the boards, and then remove
unused logo and related code as well.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
2022-06-28 17:03:32 -04:00
Tom Rini
713a8cbb94 block: ide: Remove ide_preinit function
The only platform currently that defines an ide_preinit function has an
empty one that immediately returns.  Remove this hook.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:03:32 -04:00
Tom Rini
5858b90f50 spl: Move SPL_LDSCRIPT defaults to one place
We want to keep all of the default values for SPL_LDSCRIPT in the same
place both for overall clarity as well as not polluting unrelated config
files.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:03:31 -04:00
Tom Rini
0a4fcb2abc PowerPC: Remove some unused USB code
These particular code paths aren't used anymore, remove.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:03:31 -04:00
Tom Rini
5cc1d9214a Convert CONFIG_HAS_FSL_DR_USB to Kconfig
This converts the following to Kconfig:
   CONFIG_HAS_FSL_DR_USB

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:03:31 -04:00
Fabio Estevam
b5023254b8 kontron-sl-mx8mm: Add CAAM support
Add CAAM support, which is required when enabling HAB secure boot.

Select CONFIG_SPL_DRIVERS_MISC so that CONFIG_IMX_HAB could
build successfully, if selected.

Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2022-06-28 15:24:31 +02:00
Francesco Dolcini
66af2c3e95 board: apalis_imx6: DDR init using mx6_dram_cfg()
Do DDR initialization using the procedural mx6_dram_cfg() instead of
programming the MMDC using a raw list of register/value pairs, this
solves some rare boot failures on specific "bad" modules.

Calibration values, DDR geometry are unchanged, memory timings are
updated according to the relevant memory datasheet, no changes on
the power consumption.

For IT temperature range SKUs CL is decreased from 8 to 7 and tFAW
value is increased, for commercial temperature range SKUs some
changes on ODT parameters.

This change was validated over a range of different apalis-imx6 SoM, on
the whole working temperature range with weeks of continuous testing.

Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-06-28 15:24:31 +02:00
Francesco Dolcini
d4cd19ded8 toradex: apalis/colibri_imx6: Fix CLKO1/CLKO2 output
Set CLK01 and CLK02 to 24MHz and enable it in CCM_CCOSR register.

This clock is used by both the audio codec (CLKO1) and by the CSI camera
(CLKO2) and is expected to be 24MHz.

Despite the wrong 16.5MHz there was no real issue because of the wrong
frequency since Linux reconfigures the clocks afterward, however this
was triggering an issue with noise coming from the SGTL5000 audio codec.

The problem is that the SGTL5000 does not have a reset pin and after it
is configured if the input MCLK clock is disabled it produces a constant
noise on its output, this was happening on software reboot.

Forcing the clock to be enabled in U-Boot prevent the problem by making
sure that the clock is always available, without this change as soon as
Linux was changing the clock tree (setting clk_out_sel=1 without setting
clko2_en=1) the noise would start till the actual clock was enabled
(clko2_en=1) during the SGTL5000 driver probe.

Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-06-28 15:24:31 +02:00
Marek Vasut
b70c34224e ARM: imx: Switch Data Modul i.MX8M Mini eDM SBC to USB251x Hub driver
Replace the ad-hoc I2C register programming scripted in board
environment with U-Boot DM driver.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-06-28 15:24:31 +02:00
Eugen Hristev
3820020299 board: atmel: remove calls to debug_uart_init
Since 0dba45864b ("arm: Init the debug UART") ,
the debug_uart_init is now called from crt.S

It's no longer required to call it from the board file.

With the current code, the banned <debug_uart> is printed twice:

<debug_uart>

<debug_uart>

U-Boot 2022.07-rc4-00089-gee3d158fa8 (Jun 08 2022 - 17:39:29 +0300)

Remove all calls from board_early_init_f .

Suggested-by: Balamanikandan Gunasundar <Balamanikandan.Gunasundar@microchip.com>
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2022-06-28 10:10:06 +03:00
Tom Rini
c316ee674f Xilinx changes for v2022.10
cpu:
 - Add driver for microblaze cpu
 
 net:
 - Add support for DM_ETH_PHY to AXI emac and emaclite
 
 xilinx:
 - Switch platforms to DM_ETH_PHY
 - DT chagnes in ZynqMP and Zynq
 - Enable support for SquashFS
 
 zynqmp:
 - Add support for KR260 boards
 - Move BSS from address 0
 - Move platform identification from board code to soc driver
 - Improve zynqmp_psu_init_minimize
 
 versal:
 - Enable loading app at EL1
 
 serial:
 - Setup default address and clock rates for DEBUG uarts
 
 pinctrl:
 - Add support for tri state and output enable properties
 
 relocate-rela:
 - Clean relocate-rela implementation for ARM64
 - Add support for Microblaze
 
 microblaze:
 - Add support for runtime relocation
 - Rework cache handling (wiring, Kconfig) based on cpuinfo
 - Remove interrupt support
 
 timer:
 - Extract axi timer driver from Microblaze to generic location
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCYrlYngAKCRDKSWXLKUoM
 ITgbAJ9S9xO2QqxtuodWAYMtJfvZ14c7mgCeKnyFTrrBnJkC0wPsGqE71oNJ49o=
 =3gGm
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2022.10' of https://source.denx.de/u-boot/custodians/u-boot-microblaze into next

Xilinx changes for v2022.10

cpu:
- Add driver for microblaze cpu

net:
- Add support for DM_ETH_PHY to AXI emac and emaclite

xilinx:
- Switch platforms to DM_ETH_PHY
- DT chagnes in ZynqMP and Zynq
- Enable support for SquashFS

zynqmp:
- Add support for KR260 boards
- Move BSS from address 0
- Move platform identification from board code to soc driver
- Improve zynqmp_psu_init_minimize

versal:
- Enable loading app at EL1

serial:
- Setup default address and clock rates for DEBUG uarts

pinctrl:
- Add support for tri state and output enable properties

relocate-rela:
- Clean relocate-rela implementation for ARM64
- Add support for Microblaze

microblaze:
- Add support for runtime relocation
- Rework cache handling (wiring, Kconfig) based on cpuinfo
- Remove interrupt support

timer:
- Extract axi timer driver from Microblaze to generic location
2022-06-27 10:15:50 -04:00
Samuel Holland
e008e5132f sunxi: fix initial environment loading without MMC
Commit e42dad4168 ("sunxi: use boot source for determining environment
location") changed our implementation of env_get_location() and enabled
it for every board, even those without MMC support (like the C.H.I.P.
boards). However the default fallback location of ENVL_FAT requires MMC
support compiled in, so the board hangs when trying to initially load
the environment.

Change the algorithm to only return configured environment locations,
and improve the fallback algorithm on the way.

The env_init() routine calling this function here does not behave well
if the return value is ENVL_UNKNOWN on the very first call: it will make
U-Boot proper silently hang very early.
Work around this issue by making sure we return some configured (dummy)
environment location when prio is 0. This for instance happens when
booting via FEL.

This fixes U-Boot loading on the C.H.I.P. boards.

Fixes: e42dad4168 ("sunxi: use boot source for determining environment location")
Reported-by: Chris Morgan <macroalpha82@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
[Andre: fix FEL boot case by not returning ENVL_UNKNOWN when prio==0]
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-06-26 11:22:54 +01:00
Stefan Herbrechtsmeier
036ef47b32 arm64: zynqmp: Move helper functions below header includes
Move helper functions in psu_init files below header includes to avoid
forward declarations.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Link: https://lore.kernel.org/r/20220620163650.18756-15-stefan.herbrechtsmeier-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-24 14:37:27 +02:00
Stefan Herbrechtsmeier
f93c1c8f3f xilinx: zynqmp: make spi flash support optional
The set_dfu_alt_info function use the CONFIG_SYS_SPI_U_BOOT_OFFS define
to set the dfu_alt_info environment variable for qspi boot mode. Guard
the usage of CONFIG_SYS_SPI_U_BOOT_OFFS to make spi flash support
optional.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Link: https://lore.kernel.org/r/20220620163650.18756-11-stefan.herbrechtsmeier-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-24 14:37:27 +02:00
Stefan Herbrechtsmeier
86ceedd84e xilinx: common: Separate display cpu info function
Move the print_cpuinfo function of CONFIG_DISPLAY_CPUINFO into its own
source file to support reuse by other board vendors.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Link: https://lore.kernel.org/r/20220620163650.18756-10-stefan.herbrechtsmeier-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-24 14:37:27 +02:00
Stefan Herbrechtsmeier
381ede9e38 xilinx: cpuinfo: Print soc machine
Print the soc machine in the print_cpuinfo function.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Link: https://lore.kernel.org/r/20220620163650.18756-9-stefan.herbrechtsmeier-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-24 14:37:27 +02:00
Stefan Herbrechtsmeier
a1e618a1b9 soc: xilinx: zynqmp: Add machine identification support
Add machine identification support based on the
zynqmp_get_silicon_idcode_name function and use the soc_get_machine
function of the soc uclass to get silicon idcode name for the fpga init.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Link: https://lore.kernel.org/r/20220620163650.18756-8-stefan.herbrechtsmeier-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-24 14:37:27 +02:00
Stefan Herbrechtsmeier
d43d78ef03 xilinx: zynqmp: Merge device lists
Merge the svd / xck devices into to the common zynqmp device list.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Link: https://lore.kernel.org/r/20220620163650.18756-6-stefan.herbrechtsmeier-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-24 14:37:27 +02:00
Stefan Herbrechtsmeier
71278c0e59 xilinx: zynqmp: Reuse shift macros to define masks
Reuse the shift macros to define the masks.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Link: https://lore.kernel.org/r/20220620163650.18756-5-stefan.herbrechtsmeier-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-24 14:37:27 +02:00
Stefan Herbrechtsmeier
9bc5a24dea xilinx: zynqmp: Add macro for device type mask
Add a macro for the device type mask of the id code.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Link: https://lore.kernel.org/r/20220620163650.18756-4-stefan.herbrechtsmeier-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-24 14:37:27 +02:00
Stefan Herbrechtsmeier
bcf6f71bd7 xilinx: zynqmp: Replace strncat with strlcat
Replace strncat with strlcat to always produce a valid null-terminated
string.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Link: https://lore.kernel.org/r/20220620163650.18756-3-stefan.herbrechtsmeier-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-24 14:37:27 +02:00
Ovidiu Panait
9df16c5937 microblaze: add support for handling PVR data
Add helper code for PVR (Processor Version Register) data handling. It
will be used by the UCLASS_CPU driver to populate cpuinfo fields at
runtime.

Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
Link: https://lore.kernel.org/r/20220531181435.3473549-13-ovpanait@gmail.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-24 14:16:00 +02:00
Ovidiu Panait
064057fdbe microblaze: Kconfig: introduce XILINX_MICROBLAZE0_FPGA_FAMILY option
Provide a static Kconfig value for the target FPGA archtitecture, as it is
done in Linux. The cpu-uclass driver will cross-check it with the value
read from PVR10 register.

Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
Link: https://lore.kernel.org/r/20220531181435.3473549-12-ovpanait@gmail.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-24 14:16:00 +02:00
Ovidiu Panait
84488fc693 microblaze: cache: introduce Kconfig options for icache/dcache sizes
Replace XILINX_DCACHE_BYTE_SIZE macro with two Kconfig symbols for
instruction and data caches sizes, respectively:
CONFIG_XILINX_MICROBLAZE0_ICACHE_SIZE
CONFIG_XILINX_MICROBLAZE0_DCACHE_SIZE

Also, get rid of the hardcoded value in icache_disable().

Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
Link: https://lore.kernel.org/r/20220531181435.3473549-8-ovpanait@gmail.com
Signed-off-by: Michal Simek <michal.simek@amd.com> (s/bralid/brlid/g)
2022-06-24 14:16:00 +02:00
Ovidiu Panait
8daf89678e microblaze: cache: improve icache Kconfig options
Replace CONFIG_ICACHE with a Kconfig option more limited in scope -
XILINX_MICROBLAZE0_USE_WIC. It should be enabled if the processor supports
the "wic" (Write to Instruction Cache) instruction. It will be used to
guard "wic" invocations in microblaze cache code.

Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
Link: https://lore.kernel.org/r/20220531181435.3473549-6-ovpanait@gmail.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-24 14:16:00 +02:00
Ovidiu Panait
ef0a592ae8 microblaze: cache: improve dcache Kconfig options
Replace CONFIG_DCACHE with a Kconfig option more limited in scope -
XILINX_MICROBLAZE0_USE_WDC. It should be enabled if the processor supports
the "wdc" (Write to Data Cache) instruction. It will be used to guard
"wdc" invocations in microblaze cache code.

Also, drop all ifdefs around flush_cache() calls and only keep one
CONFIG_IS_ENABLED() guard within flush_cache() itself.

Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
Link: https://lore.kernel.org/r/20220531181435.3473549-5-ovpanait@gmail.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-24 14:16:00 +02:00
Ashok Reddy Soma
2eeceb4842 arm64: versal: Add support to load an app at EL1
Add support to switch to EL1 and load an EL1 app from U-Boot which is
executing at EL2 or EL3 in aarch64 mode.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Link: https://lore.kernel.org/r/20220506055345.1921-1-ashok.reddy.soma@xilinx.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-24 14:11:05 +02:00
Andrew Scull
99e2fbcb69 linker_lists: Rename sections to remove . prefix
Rename the sections used to implement linker lists so they begin with
'__u_boot_list' rather than '.u_boot_list'. The double underscore at the
start is still distinct from the single underscore used by the symbol
names.

Having a '.' in the section names conflicts with clang's ASAN
instrumentation which tries to add redzones between the linker list
elements, causing expected accesses to fail. However, clang doesn't try
to add redzones to user sections, which are names with all alphanumeric
and underscore characters.

Signed-off-by: Andrew Scull <ascull@google.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-06-23 12:58:18 -04:00
Tom Rini
929e581a62 corstone1000: Convert to text file environment
Convert this platform to using the text file environment rather than
defining CONFIG_EXTRA_ENV_SETTINGS.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-22 21:30:05 -04:00
Tom Rini
781a144a7a gxp: Convert to text file environment
Convert this platform to using the text file environment rather than
defining CONFIG_EXTRA_ENV_SETTINGS.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-22 21:30:05 -04:00
Nick Hawkins
e7ea0a2ba3 board: hpe: gxp: add HPE GXP soc support
Add basic support for the HPE GXP SoC. Reset the EHCI controller at
boot.

Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
2022-06-22 21:30:05 -04:00
Rui Miguel Silva
f98457d70a arm: add support to corstone1000 platform
Corstone1000 is a platform from arm, which includes pre
verified Corstone SSE710 sub-system that combines Cortex-A and
Cortex-M processors [0].

This code adds the support for the Cortex-A35 implementation
at host side, it contains also the necessary bits to support
the Corstone 1000 FVP (Fixed Virtual Platform) [1] and also the
FPGA MPS3 board implementation of this platform. [2]

0: https://developer.arm.com/documentation/102360/0000
1: https://developer.arm.com/tools-and-software/open-source-software/arm-platforms-software/arm-ecosystem-fvps
2: https://developer.arm.com/documentation/dai0550/c/

Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2022-06-22 12:35:15 -04:00
Tom Rini
52af0101be Merge branch 'master' into next
Merge in v2022.07-rc5.
2022-06-20 14:40:59 -04:00
Tom Rini
2f7821a927 - Add STM32MP13 SoCs support with associated board STM32M135F-DK
- Correct livetree support in stm32mp1 boards
 - Activate livetree for stm32mp15 DHSOM boards
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEE56Yx6b9SnloYCWtD4rK92eCqk3UFAmKsehgACgkQ4rK92eCq
 k3UexAf+JThCd7FlN3OkTVKIdZKeNm2KpQxrqt20whiqp/nSUzxXrjdlCTKZEER2
 lLJoVnwr+bkmdlqsa6gAZXSsd0lUv37XnLsLA5or278tFNlKp6gzYrz49FR59mVC
 ie7/NlY5FgM5qmKGCob7tjwJ78r2/S3T2EaLiAMWUmw2UB5KZU6h3napHZ+1T0se
 vaEAVRzAaZeYzKU3k6RBSv2tXQ6ssvfpp9RcXpRGtrN908AqDhHiOfntuOrnsEe0
 9rjY1DSXO9a5WqHRm2KQ3FrA/By2layQ+4WH/HgIPHasisnmo3E/euVWmhtTaiT/
 g5bOLwyFQ2/RvdMlMxXlKUcuMfNwRA==
 =Hhzj
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20220620' of https://source.denx.de/u-boot/custodians/u-boot-stm into next

- Add STM32MP13 SoCs support with associated board STM32M135F-DK
- Correct livetree support in stm32mp1 boards
- Activate livetree for stm32mp15 DHSOM boards
2022-06-20 08:09:24 -04:00
Michael Walle
1029249b00 board: sl28: support 8 GiB memory
The board supports up to 8 GiB memory. The memory is soldered on the
board but the configuration is equivalent to a dual chip select, dual
rank DIMM module.

Signed-off-by: Michael Walle <michael@walle.cc>
2022-06-20 15:52:45 +08:00
Michael Walle
7fd5ca1501 board: sl28: remove unneeded ddr config parameter
config_2 doesn't need to be set to zero because that is already the
default value.

Signed-off-by: Michael Walle <michael@walle.cc>
2022-06-20 15:52:45 +08:00
Michael Walle
6bdda4b200 board: sl28: set CPO value
With a 8GiB memory board, it seems that the "very unlikely event" of a
DDR initialization with non-optimal values are not really that unlikely.
It happens in about every other reboot. As described in erratum
A-009942, preset the DEBUG_28 register with an optimal value. The value
iself depends on the memory configuration of the board, but the used
value seems to work well for all variants.

Signed-off-by: Michael Walle <michael@walle.cc>
2022-06-20 15:52:45 +08:00
Alison Wang
d494806376 ls1028a: hdp: Add config support for HDP firmware loading
This patch adds config support for HDP firmware loading on LS1028A.

Signed-off-by: Oliver Brown <oliver.brown@nxp.com>
Signed-off-by: Alison Wang <alison.wang@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2022-06-20 09:18:26 +08:00
Pali Rohár
20fb58fc5a board: freescale: p1_p2_rdb_pc: Implement board_reset()
Do board reset via CPLD's system reset register.

Signed-off-by: Pali Rohár <pali@kernel.org>
2022-06-20 09:18:26 +08:00
Pali Rohár
ae0e7ee886 board: freescale: p1_p2_rdb_pc: Enable TDM function only for P1010
TDM function is supported only on P1010. P2020 does not have PMUXCR_TDM_ENA
register, so do not enable it.

Signed-off-by: Pali Rohár <pali@kernel.org>
2022-06-20 09:18:26 +08:00
Tom Rini
aad77c215c - Fix the stm32prog command for stm32mp platform
- Add stm32mp15x DHCOR based DRC Compact board
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEE56Yx6b9SnloYCWtD4rK92eCqk3UFAmKsMKcACgkQ4rK92eCq
 k3UeWQf/bAXsfmZpP3BixC/auIhJjLwmaacwQ3sIi7A7BWoSYP5A+7AYB+e8x+v1
 QlMTn5df8mE24LKqRj6nCPiWPWj1cMr2YOpeFofVSmjHTfA89mclFncyFq1qgNHZ
 ZYIeUQh0kdzZTzjBFXaWuG9qTB3F6r50lTDzjjEq17p0rEOOiy7sU4oLIbU92mAJ
 xcLEuwjLkmZmdm8e3DUcSkT/U5HGd9hNX1gucKSPNyFnslm6QbvNEkOiUgl1+emZ
 iKdwCH+8/ZDCuZBdI6AbcQz9WYREbfATUKdxI9hk8Yvr0xDmh0sjfhQSP2xwo981
 KAMRIMl3yJRwwJVZJzXStUtYjWK/GQ==
 =vis0
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20220617' of https://source.denx.de/u-boot/custodians/u-boot-stm

- Fix the stm32prog command for stm32mp platform
- Add stm32mp15x DHCOR based DRC Compact board
2022-06-17 09:41:11 -04:00
Patrick Delaunay
7171d99296 stm32mp: stpmic1: remove the debug unit request by debugger
Depending on backup register value, U-Boot SPL maintains the debug unit
powered-on for debugging purpose; only BUCK1 is required for powering
the debug unit, so revert the setting for all the other power lanes,
except BUCK3 that has to be always on.

To be functional this patch requires a modification in the debugger
,openocd for example, to update the STM32MP15 backup register when it is
required to debug SPL after reset. After deeper analysis this behavior
will be never supported in tools so the associated code, will be never
used and the associated code can be removed.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-06-17 14:12:27 +02:00
Patrick Delaunay
5a605b7c86 board: dhelectronics: stm32mp1: convert to livetree
Replace call to fdt_*() functions and access to gd->fdt_blob
with call to ofnode_*() functions to support a live tree.

Tested-by: Marek Vasut <marex@denx.de>
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-06-17 14:12:27 +02:00
Patrick Delaunay
655100d706 board: engicam: stm32mp1: convert to livetree
Replace gd->fdt_blob access with fdt_getprop() function to the
function ofnode_get_property() to support a live tree.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-06-17 14:12:27 +02:00
Patrick Delaunay
6350633ed9 board: stm32mp1: convert to livetree
Replace gd->fdt_blob access with fdt_getprop() function to the
function ofnode_get_property() to support a live tree.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-06-17 14:12:26 +02:00
Patrick Delaunay
11517ccc8c configs: add stm32mp13 defconfig
Add a initial config for STM32M13x SOC family, using the stm32mp135f-dk
device tree.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-06-17 10:41:16 +02:00
Patrick Delaunay
ae3e2c2bf7 board: stm32pm1: add stm32mp13 board support
Add stm32mp15x prefix to all STM32MP15x board specific functions,
this patch is a preliminary step for STM32MP13x support.

This patch also adds the RCC probe to avoid circular access with
usbphyc probe as clk provider.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-06-17 10:41:16 +02:00
Patrick Delaunay
960debbe3c arm: stm32mp: add support of STM32MP13x
Introduce the code in mach-stm32mp and the configuration file
stm32mp13_defconfig for the new STM32MP family.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-06-17 09:58:21 +02:00
Patrick Delaunay
a82abb15a8 ARM: dts: stm32: add STM32MP13 SoCs support
Add initial support of STM32MP13 family based on v5.18-rc2

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-06-17 09:58:21 +02:00
Marek Vasut
4f71c80b0d ARM: dts: stm32: Add DHCOR based DRC Compact board
Add DT for DH DRC Compact unit, which is a universal controller device.
The system has two ethernet ports, one CAN, RS485 and RS232, USB, uSD
card slot, eMMC and SDIO Wi-Fi.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-06-17 09:31:19 +02:00
Corentin LABBE
2f51f946e3 board: ti: am335x: eth_cpsw should depend on CONFIG_NET
The origin of this patch is the breaking of am335x-hs boot
due to commit e41651fffd ("dm: Support parent devices with of-platdata")
HS boards have less SRAM for SPL and so this commit increased memory usage beyond am335x limit.
This commit added 10 driver binding pass and am335x boot only if one pass is done.
SPL try to do more than one pass due to eth_cpsw failing.
Since HS SPL does not need network (and NET is already disabled in config),
the easiest fix is to "remove" eth_cpsw from SPL by testing if NET is enabled.

Signed-off-by: Corentin LABBE <clabbe@baylibre.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Andrew Davis <afd@ti.com>
2022-06-16 15:22:55 -04:00
Christophe Leroy
48f44de8b4 Update email address and company name
This patch updates my email address and company name.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
2022-06-16 15:22:54 -04:00
Peng Fan
e8780d2380 imx: phycore_imx8mm/p: clean up board watchdog code
pinctrl_wdog already marked u-boot,dm-spl, so clean up board code.

The set_wdog_reset() function is not necessary as this is handled by
the imx_watchdog.c driver due to the 'fsl,ext-reset-output' property
being set.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Teresa Remmet <t.remmet@phytec.de>
2022-06-14 21:33:14 +02:00
Peng Fan
4152ea24f2 imx: imx8mn-kontron-n801x: enable pinctrl_wdog in SPL
Mark pinctrl_wdog as u-boot,dm-spl to clean up board code,

The set_wdog_reset() function is not necessary as this is handled by
the imx_watchdog.c driver due to the 'fsl,ext-reset-output' property
being set.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2022-06-14 21:33:14 +02:00
Peng Fan
722e2b9a2b imx: imx8mp_rsb7320a1: enable wdog driver model in SPL
Mark wdog1/pinctrl_wdog as u-boot,dm-spl to clean up board code,

The set_wdog_reset() function is not necessary as this is handled by
the imx_watchdog.c driver due to the 'fsl,ext-reset-output' property
being set.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-06-14 21:33:14 +02:00
Peng Fan
ae75489c48 imx: imx8mn_var_som: clean up board watchdog code
pinctrl_wdog already marked u-boot,dm-spl, so clean up board code.

The set_wdog_reset() function is not necessary as this is handled by
the imx_watchdog.c driver due to the 'fsl,ext-reset-output' property
being set.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
2022-06-14 21:33:14 +02:00
Peng Fan
cbda080ae9 imx: imx8mn-beacon: enable pinctrl_wdog in SPL
Mark pinctrl_wdog as u-boot,dm-spl to clean up board code,

The set_wdog_reset() function is not necessary as this is handled by
the imx_watchdog.c driver due to the 'fsl,ext-reset-output' property
being set.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-06-14 21:33:14 +02:00
Peng Fan
6692cd967d imx: imx8mm/n/p-venice: enable pinctrl_wdog in SPL
Mark pinctrl_wdog as u-boot,dm-spl to clean up board code,

The set_wdog_reset() function is not necessary as this is handled by
the imx_watchdog.c driver due to the 'fsl,ext-reset-output' property
being set.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-06-14 21:33:14 +02:00
Peng Fan
333a6fa12f imx: engicam-imx8mm: drop unused macro
Drop unused WDOG macro

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
2022-06-14 21:33:14 +02:00
Peng Fan
2d7f40cad5 imx: imx8mm-cl-iot-gate: enable pinctrl_wdog in SPL
Mark pinctrl_wdog as u-boot,dm-spl to clean up board code,

The set_wdog_reset() function is not necessary as this is handled by
the imx_watchdog.c driver due to the 'fsl,ext-reset-output' property
being set.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-06-14 21:33:14 +02:00
Peng Fan
ee106eda7e imx: imx8mm_beacon: enable pinctrl_wdog in SPL
Mark pinctrl_wdog as u-boot,dm-spl to clean up board code,

The set_wdog_reset() function is not necessary as this is handled by
the imx_watchdog.c driver due to the 'fsl,ext-reset-output' property
being set.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-06-14 21:33:13 +02:00
Peng Fan
0a16da8079 imx: kontron-sl-mx8mm: enable DM_SERIAL
Enable CONFIG_DM_SERIAL. uart and its pinmux was already
marked with u-boot,dm-spl.
Move preloader_console_init after spl_init to make sure driver
model work.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2022-06-14 21:33:13 +02:00
Peng Fan
bb9e14cfd0 imx: imx8mn_var_som: enable DM_SERIAL
Enable CONFIG_DM_SERIAL. uart and its pinmux was already
marked with u-boot,dm-spl.
Move preloader_console_init after spl_init to make sure driver
model work.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-06-14 21:33:13 +02:00
Peng Fan
64d118b27f imx: imx8m[m/p]_phycore: Enable DM_SERIAL
Enable CONFIG_DM_SERIAL. uart and its pinmux was already
marked with u-boot,dm-spl.
Move preloader_console_init after spl_early_init to make sure driver
model work.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Teresa Remmet <t.remmet@phytec.de>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-06-14 21:33:13 +02:00
Peng Fan
4ebb9a5898 imx: imx8mm_icore: Enable SPL_DM_SERIAL
Enable CONFIG_SPL_DM_SERIAL. uart2 and its pinmux was already
marked with u-boot,dm-spl.
Move preloader_console_init after spl_early_init to make sure driver
model work.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-06-14 21:33:13 +02:00
Peng Fan
37750505b9 imx: imx8mm-cl-iot-gate: Enable DM_SERIAL
Enable CONFIG_DM_SERIAL. uart3 and its pinmux was already
marked with u-boot,dm-spl.
Move preloader_console_init after spl_early_init to make sure driver
model work.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-06-14 21:33:13 +02:00
Peng Fan
d35130fef8 imx: imx8m[m/n]_beacon: Enable SPL_DM_SERIAL
Enable CONFIG_SPL_DM_SERIAL. uart2 and its pinmux was already
marked with u-boot,dm-spl.
Move preloader_console_init after spl_init to make sure driver
model work.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx8mm_beacon
Reviewed-by: Fabio Estevam <festevam@denx.de>
Tested-by: Adam Ford <aford173@gmail.com> #imx8mn_beacon
2022-06-14 21:33:13 +02:00
Gaurav Jain
66e54716cf secure boot: enable ARCH_MISC_INIT config.
add ARCH_MISC_INIT to initilaize caam jr driver.

Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-06-14 21:25:26 +02:00
Josua Mayer
741ce3084e mx6cuboxi: fixup dtb ethernet phy nodes before booting an OS
SoM revision 1.9 has replaced the ar8035 phy address 0 with an adin1300
at address 1. Because early SoMs had a hardware flaw, the ar8035 can
also appear at address 4 - making it a total of 3 phy nodes in the DTB.

To avoid confusing Linux with probe errors, fixup the dtb to only enable
the phy node that is detected at runtime.

Signed-off-by: Josua Mayer <josua@solid-run.com>
2022-06-14 21:25:26 +02:00
Philippe Schenker
0da8dde634 board: apalis-imx8: add new 8gb product variant
Add the new Apalis iMX8 product variant

0067: Apalis iMX8 QuadMax 8GB Wi-Fi / BT IT

the only difference to the product

0037 Apalis iMX8 QuadMax 4GB Wi-Fi / BT IT

is the 8gb of RAM. Toradex strategy to choose the correct RAM timing in
SCFW is by fuses in the user area telling which RAM timing to load.

This commit makes use of this information to set the correct size of
the RAM and therefore distinguish between the new 0067 and 0037 product

Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-06-14 21:25:26 +02:00
Philippe Schenker
4941035143 toradex: tdx-cfg-block: add new 8gb apalis-imx8
0067: Apalis iMX8 QuadMax 8GB Wi-Fi / BT IT

This module is identical to its 4GB counterpart
0037: Apalis iMX8 QuadMax 4GB Wi-Fi / BT IT
except for the RAM size.

Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-06-14 21:25:26 +02:00
Tom Rini
c1d9020cc7 Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-tegra
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-14 12:59:12 -04:00
Marcel Ziswiler
8f27bf114e board: apalis_t30/tk1/colibri_t20/t30: integrate mac address via dt
Use device tree to set MAC address of the Ethernet chip.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2022-06-13 15:31:15 -07:00
Vignesh Raghavendra
2d257d9279 configs: Add configs for AM62x SK
Add am62x_evm_r5_defconfig for R5 SPL and am62x_evm_a53_defconfig for
A53 SPL and U-Boot support.

To keep the changes to minimum. Only UART And SD boot related configs
are included. This should serve as good starting point for new board
bringup with AM62x.

Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
[trini: Migrate a number of CONFIG symbols, have re-tested]
Tested-by: Georgi Vlaev <g-vlaev@ti.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-10 13:37:33 -04:00
Suman Anna
900349b7dd board: ti: Introduce the basic files to support AM62 SK board
Add basic support for AM62 SK. This has 2GB DDR.
Note that stack for R5 SPL is in OCRAM @ 0x7000ffff so that is away from
BSS and does not step on BSS section

Add only the bare minimum required to support UART and SD.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2022-06-10 13:37:33 -04:00
Derald D. Woods
161535444b ARM: omap3: evm: Power on MMC when setting up PMIC
This commit copies the related code changes from the BeagleBoard.

Reference:
- 848cfe098f

Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
2022-06-10 13:37:32 -04:00
William Zhang
f8209d3051 arm: bcmbca: introduce the bcmbca architecture and 47622 SOC
This is the initial support for Broadcom's ARM-based 47622 SOC.

In this change, our first SOC is an armv7 platform called 47622. The
initial support includes a bare-bone implementation and dts with ARM
PL011 uart.

The SOC-specific code resides in arch/arm/mach-bcmbca/<soc> and board
related code is in board/broadcom/bcmba.

The u-boot image can be loaded from flash or network to the entry
point address in the memory and boot from there.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Kursad Oney <kursad.oney@broadcom.com>
Signed-off-by: Anand Gore <anand.gore@broadcom.com>
Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-06-10 13:37:32 -04:00
Vaishnav Achath
66a33f41e9 ti: j721e: enable hyperflash spl fixup for j721e
On j721e, its not possible to use OSPI0 and HBMC simultaneously as they
are muxed within the Flash Subsystem hence disable HBMC by default and
keep OSPI enabled. Bootloader will fixup DT when it detects HyperFlash
mux selection instead of OSPI.

Also updated detect_enable_hyperflash to use correct GPIO when checking
hypermux selection state:
* J7200 - hypermux sel connected to WKUP_GPIO0_6
* J721E - hypermux·sel·connected·to·WKUP_GPIO0_8

Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
2022-06-10 09:03:22 -04:00
Sean Anderson
e844e5d908 sandbox: Move some mac addresses to device tree
This prevents some conflicts when running sandbox with -D, since the
"rom" mac address will be random and won't match the environment. We
still need to keep addresses for eth1 and eth6 in the environment,
because dm_test_eth_rotate expects to be able to disable them by
removing their envaddr variables. This can likely be fixed in a future
series by adding a function to cause sandbox eth_opts callback for a
particular mac to fail immediately.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-06-08 13:59:52 -04:00
Sean Anderson
29186884f8 sandbox: Remove eth2addr from environment
DSA interfaces use the same mac address for each interface, unless
instructed otherwise. Just set eth4addr and let eth2addr and eth7addr be
set automatically.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-06-08 13:59:52 -04:00
Sean Anderson
469a968ac7 sandbox: net: Add mac address for eth8 to environment
The phy_eth0 interface introduced in commit f3dd213e15 ("net: introduce
helpers to get PHY ofnode from MAC") uses a globally-administered
address. Switch to using a locally-administered address, and add it to
the sandbox environment, like the others.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
2022-06-08 13:59:52 -04:00
Pali Rohár
b62450cf22 serial: Replace CONFIG_DEBUG_UART_BASE by CONFIG_VAL(DEBUG_UART_BASE)
CONFIG_VAL(DEBUG_UART_BASE) expands to CONFIG_DEBUG_UART_BASE or
CONFIG_SPL_DEBUG_UART_BASE or CONFIG_TPL_DEBUG_UART_BASE and allows boards
to set different values for SPL, TPL and U-Boot Proper.

For ns16550 driver this support is there since commit d293759d55
("serial: ns16550: Add support for SPL_DEBUG_UART_BASE").

Signed-off-by: Pali Rohár <pali@kernel.org>
2022-06-06 18:01:21 -04:00
Tom Rini
14b4817513 ax25-ae350: Move CONFIG_SYS_FDT_BASE to Kconfig
The address where the device tree will be passed in to U-Boot at is now
moved to the Kconfig file.  If this is user configurable, it needs to be
exposed rather than hidden, and should probably be renamed as well.

Reviewed-by: Rick Chen <rick@andestech.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:29 -04:00
Tom Rini
7f2c91e5d8 Convert CONFIG_SPL_GD_ADDR to Kconfig
This converts the following to Kconfig:
   CONFIG_SPL_GD_ADDR

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:29 -04:00
Tom Rini
55cf860ba7 Convert CONFIG_SPL_RELOC_TEXT_BASE et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SPL_RELOC_TEXT_BASE
   CONFIG_SPL_RELOC_STACK
   CONFIG_SPL_RELOC_MALLOC_ADDR
   CONFIG_SPL_RELOC_MALLOC_SIZE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:28 -04:00
Tom Rini
eaf6ea6a1d Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h
- Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR
- Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack
  pointer directly, otherwise we use the common calculation.
- On some platforms that were using the standard calculation but did not
  set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them.
- On a small number of platforms that were not subtracting
  GENERATED_GBL_DATA_SIZE do so now via the standard calculation.
- CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most
  board config header files.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:19 -04:00
Tom Rini
90f0819a31 Convert CONFIG_SPL_COMMON_INIT_DDR to Kconfig
This converts the following to Kconfig:
   CONFIG_SPL_COMMON_INIT_DDR

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:12 -04:00
Tom Rini
9b5f9aeb3b Convert CONFIG_SPL_BSS_MAX_SIZE et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SPL_BSS_MAX_SIZE
   CONFIG_SPL_MAX_FOOTPRINT

Note that the da850evm platforms were violating the "only use one" rule
here, and so now hard-code their BSS limit.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:10 -04:00
Tom Rini
b35316fb67 Convert CONFIG_SPL_INIT_MINIMAL et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SPL_INIT_MINIMAL
   CONFIG_SPL_FLUSH_IMAGE
   CONFIG_SPL_SKIP_RELOCATE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:00 -04:00
Tom Rini
b7fbdc55c7 Convert CONFIG_HUSH_INIT_VAR to Kconfig
This converts the following to Kconfig:
   CONFIG_HUSH_INIT_VAR

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:00 -04:00
Michal Simek
93216276f5 xilinx: fru: Replace spaces with \0 in detected revision
Also fix board revision field where spaces are used instead of \0.
The same change was done for board name by commit 530560b6f8 ("xilinx:
fru: Replace spaces with \0 in detected name").

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/e069e5134e57899e859786ad8ba48721df6df752.1653911444.git.michal.simek@amd.com
2022-06-06 09:32:26 +02:00
Dave Gerlach
c30f6d62f0 board: ti: am64x: Update MAINTAINERS
Move maintainership of TI AM64x boards to Vignesh.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2022-06-03 15:42:05 -04:00
Tom Rini
4fe629d2e8 Merge https://source.denx.de/u-boot/custodians/u-boot-riscv 2022-05-27 08:50:42 -04:00
Wasim Khan
d9402bd49b board: freescale: Update MAINTAINERS List
Update MAINTAINERS List for LS2088ARDB and LS2088AQDS
platforms

Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
2022-05-26 10:32:26 -04:00
Rick Chen
b277a95c6e riscv: ae350: Fix OF_BOARD boot failure
Enable OF_HAS_PRIOR_STAGE for ae350 boards with OF_BOARD

Fixes: 239d22c795 ("fdt: Enable OF_HAS_PRIOR_STAGE for most boards with OF_BOARD")
Signed-off-by: Rick Chen <rick@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2022-05-26 18:37:51 +08:00
Tom Rini
661f540075 Xilinx changes for v2022.07-rc4
zynqmp:
 - Fix DP PLL configuration for zcu102/zcu106 and SOM
 - Fix split mode for starting R5s
 - DT fixes
 - Remove firmware node for mini configurations
 - Wire TEE for multi DTB fit image
 
 xilinx:
 - Handle board_get_usable_ram_top(0) properly
 
 phy:
 - Extend psgtr timeout
 
 mmc:
 - Fix mini configuration which misses zynqmp_pm_is_function_supported()
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCYo4bYwAKCRDKSWXLKUoM
 IYmTAJ9t4GDXggJ7ErB3Kk7/qSrywjEGAgCgnKQVgQvjo1B6o5aiwbk1wR86zkQ=
 =W7X8
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2022.07-rc4' of https://source.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx changes for v2022.07-rc4

zynqmp:
- Fix DP PLL configuration for zcu102/zcu106 and SOM
- Fix split mode for starting R5s
- DT fixes
- Remove firmware node for mini configurations
- Wire TEE for multi DTB fit image

xilinx:
- Handle board_get_usable_ram_top(0) properly

phy:
- Extend psgtr timeout

mmc:
- Fix mini configuration which misses zynqmp_pm_is_function_supported()
2022-05-25 09:50:08 -04:00
Tom Rini
7e0edcadb0 Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sunxi
The bulk of it is (finally!) some DT sync from the kernel. We refrained
from syncing one incompatible change, as this would spoil booting Linux
kernels before v5.13 with U-Boot's DT (via UEFI, for instance).
I test booted Linux v5.18 and v5.4 with that new DT on some boards, and
the headless peripherals (MMC, USB, Ethernet) seemed to work.
The rest are fixes:
- silencing missing clock warnings due to the new pinctrl driver
- fixing "UART0 on PortF", allowing UART access through the SD card pins
- add an F1C100s clock driver, to enable MMC support (SPI comes later)
- some cleanups for CONS_INDEX_n in Kconfig

Tested on BananaPi-M1, Pine64-LTS, Pine-H64, X96-Mate (H616) and
OrangePi-Zero.
2022-05-24 23:29:00 -04:00
Samuel Holland
3ba0a25c44 sunxi: Skip MMC0 init when its pinmux conflicts with UART0
Currently, selecting UART0_PORT_F entirely disables MMC support on sunxi
platforms. But this is a bigger hammer then needed. Muxing UART0 to the
pins on port F only causes a conflict with MMC0, so minimize the impact
by specifically skipping MMC0 init. We can continue to use MMC1/2 if
those are enabled.

Let's also remove the preprocessor check while refacting this function.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-05-24 01:14:35 +01:00
Humberto Naves
1b05136a6c arm: socfpga: Add the terasic de10-standard board
Use the de10-nano files as templates for the de10-standard board.
The files in qts directory are generated by quartus from the GHRD
design.

Signed-off-by: Humberto Naves <hsnaves@gmail.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2022-05-23 21:28:07 +02:00
Patrice Chotard
61708bb0a2 spi: spi-uclass: Add new spi_get_bus_and_cs() implementation
Move legacy spi_get_bus_and_cs() code to _spi_get_bus_and_cs().

Add new spi_get_bus_and_cs() implementation which rely on DT
for speed and mode and don't need any drv_name nor dev_name
parameters. This will prepare the ground for next patch.

Update all callers to use _spi_get_bus_and_cs() to keep the
same behavior.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>

Cc: Marek Behun <marek.behun@nic.cz>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Vignesh R <vigneshr@ti.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
Cc: Lukasz Majewski <lukma@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Stefan Roese <sr@denx.de>
Cc: "Pali Rohár" <pali@kernel.org>
Cc: Konstantin Porotchkin <kostap@marvell.com>
Cc: Igal Liberman <igall@marvell.com>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Pratyush Yadav <p.yadav@ti.com>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Anji J <anji.jagarlmudi@nxp.com>
Cc: Biwen Li <biwen.li@nxp.com>
Cc: Priyanka Jain <priyanka.jain@nxp.com>
Cc: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
2022-05-23 09:33:10 -04:00
Tom Rini
004d30c786 u-boot-imx-20220523
-------------------
 
 CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/12087
 
 Additionally to u-boot-imx20200520:
 
 - DH MX8MP
 - i.MX GPIO: reading GPIO when direction is output
 - Menlo i.MX53: switch to DM
 
 And from u-boot-imx20200520:
 
 - fix Verdin hang
 - add pca9450 regulator
 - conversion to DM_SERIAL
 - NAND block handling
 - fix crypto
 - enable cache on some boards
 - add ACC board (MX6)
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCYotwGw8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76bsGgCfX5NxKe5FDWuvr3SRdt1mHJG5vMsAmwX5SxGF
 MjERnrOg0X/Z9984CWL2
 =/WEs
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20220523' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

u-boot-imx-20220523
-------------------

CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/12087

Additionally to u-boot-imx20200520:

- DH MX8MP
- i.MX GPIO: reading GPIO when direction is output
- Menlo i.MX53: switch to DM

And from u-boot-imx20200520:

- fix Verdin hang
- add pca9450 regulator
- conversion to DM_SERIAL
- NAND block handling
- fix crypto
- enable cache on some boards
- add ACC board (MX6)
2022-05-23 09:25:39 -04:00
Marek Vasut
4d573d5c98 ARM: dts: imx: Add support for DH electronics i.MX8M Plus DHCOM and PDK2
Add support for DH electronics i.MX8M Plus DHCOM SoM on PDK2 carrier board.
Currently supported are serial console, EQoS and FEC ethernets, eMMC, SD,
SPI NOR and USB 3.0 host.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2022-05-23 11:37:58 +02:00
Marek Vasut
9d371e5fea ARM: imx: mx5: Convert MX53 Menlo board to DM I2C and DM RTC
Convert the board to DM I2C and DM RTC. This leads to removal of board
side iomuxc configuration, which is now done using pin control driver,
and conversion of board side legacy I2C accessors to DM ones.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2022-05-23 11:37:58 +02:00
Philip Oberfichtner
bd8df1f7dd ARM: imx6: Adapt device tree selection in DH board file
Before this commit device tree selection could rely solely on
differentiating the iMX6 processor variant Q and DL. After adding two new
carrier boards, the DRC02 and the picoITX, the interchangeability of SoMs
makes this approach infeasible.

It is now required to specify the carrier board (dhcom-drc02,
dhcom-picoitx or dhcom-pdk2) at compile time using
CONFIG_DEFAULT_DEVICETREE. The SoM is determined at runtime as before.

Signed-off-by: Philip Oberfichtner <pro@denx.de>
2022-05-20 12:36:49 +02:00
Philip Oberfichtner
e1e0d9ab9f ARM: imx6: Fix broken DT path in DH board file
In the DH electronics iMX6 board file fix the outdated eeprom path by
using a DT label instead.

The label has been newly created for all iMX6QDL DHCOM boards.

Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Philip Oberfichtner <pro@denx.de>
2022-05-20 12:36:48 +02:00
Peng Fan
fbc6b14143 imx: imx8mp_rsb3720a1: convert to DM_SERIAL
Enable CONFIG_DM_SERIAL. uart2 and its pinmux was already
marked with u-boot,dm-spl.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-05-20 12:36:48 +02:00
Marcel Ziswiler
c898b53755 ARM: imx8mm: verdin-imx8mm: fix board hang in spl
Move the preloader_console_init() call after spl_early_init() to avoid
board hang in SPL.

While at it remove explicit in-code console/debug UART pinmuxing (uart1
and its pinmuxing are already marked as u-boot,dm-spl via device tree).

Fixes: 4551e18987 ("configs: verdin-imx8mm: verdin-imx8mp: enable dm serial")
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-05-20 12:36:48 +02:00
Philip Oberfichtner
55d1537c5b bosch: Add initial board support for ACC
The Bosch ACC (Air Center Control) Board is based on the i.MX6D.

The device tree is copied from Linux, see [1]. The only difference
compared to the Linux DT is the removal of usbphynop properties. They are
defined in the Linux version of imx6qdl.dtsi, but not in the u-boot
version.

[1] Commit 6192cf8ac082 from
    git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git

Signed-off-by: Philip Oberfichtner <pro@denx.de>
2022-05-20 12:36:48 +02:00
Michael Trimarchi
35461fe94e imx: imx8mn_smm_s2/s2pro: Enable TrustZone
When the board was added, enabling tzc380 was left off by
mistake. The optee was tested with the following configuration
in s2pro

+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 6MiB */
+		optee_core@5f800000 {
+			reg = <0x00 0x5f800000 0x00 0x600000>;
+		};
+
+		/* 2MiB */
+		optee_shm@5fe00000 {
+			reg = <0x00 0x5fe00000 0x00 0x200000>;
+		};
+	};
+

Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
2022-05-20 12:36:48 +02:00
Gaurav Jain
cad77280c3 i.MX8ULP: add display_ele_fw_version api
implement get f/w version api.
print ele f/w version in spl.

Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@nxp.com>
2022-05-20 12:36:47 +02:00
Ye Li
cda8f87349 caam: Fix crash in case caam_jr_probe failed
If probing caam_jr returns failure, the variable "dev" will not be
initialized, so we can't use dev->name for the error print.
Otherwise it will cause crash.

Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
2022-05-20 12:36:47 +02:00
Peng Fan
8494fe077c imx: toradex/verdin-imx8mm/p: cleanup board watchdog code
pinctrl_wdog already marked u-boot,dm-spl, so clean up board code.

The set_wdog_reset() function is not necessary as this is handled by
the imx_watchdog.c driver due to the 'fsl,ext-reset-output' property
being set.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-05-20 09:30:29 +02:00
Peng Fan
a6924c95d1 imx: verdin-imx8mm/p: cleanup board watchdog code
pinctrl_wdog already marked u-boot,dm-spl, so clean up board code.

The set_wdog_reset() function is not necessary as this is handled by
the imx_watchdog.c driver due to the 'fsl,ext-reset-output' property
being set.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-05-20 09:30:29 +02:00
Peng Fan
09bf8270cf imx: imx8mn_smm_s2: clean up board watchdog code
pinctrl_wdog already marked u-boot,dm-spl, so clean up board code.

The set_wdog_reset() function is not necessary as this is handled by
the imx_watchdog.c driver due to the 'fsl,ext-reset-output' property
being set.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
2022-05-20 09:30:29 +02:00
Peng Fan
0726bdd460 imx: imx8mm-mx8menlo: drop unneeded watchdog settings
pinctrl_wdog as u-boot,dm-spl already marked in imx8mm-verdin-u-boot.dtsi,

The set_wdog_reset() function is not necessary as this is handled by
the imx_watchdog.c driver due to the 'fsl,ext-reset-output' property
being set.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2022-05-20 09:30:29 +02:00
Peng Fan
a38ed61643 imx: imx8mp_evk: enable pinctrl_wdog in SPL
Mark pinctrl_wdog as u-boot,dm-spl to clean up board code,

The set_wdog_reset() function is not necessary as this is handled by
the imx_watchdog.c driver due to the 'fsl,ext-reset-output' property
being set.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-05-20 09:30:29 +02:00
Peng Fan
ba06ea8991 imx: imx8mm_evk: enable pinctrl_wdog in SPL
Mark pinctrl_wdog as u-boot,dm-spl to clean up board code,

The set_wdog_reset() function is not necessary as this is handled by
the imx_watchdog.c driver due to the 'fsl,ext-reset-output' property
being set.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-05-20 09:30:29 +02:00
Peng Fan
6d5cc90670 imx: imx8mn_evk: enable pinctrl_wdog in SPL
Mark pinctrl_wdog as u-boot,dm-spl to clean up board code,

The set_wdog_reset() function is not necessary as this is handled by
the imx_watchdog.c driver due to the 'fsl,ext-reset-output' property
being set.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-05-20 09:30:29 +02:00
Peng Fan
6ea118ef9a imx: imx8mm_edm_sbc: Enable SPL_DM_SERIAL
Enable CONFIG_SPL_DM_SERIAL. uart and its pinmux was already
marked with u-boot,dm-spl.
Move preloader_console_init after spl_early_init to make sure driver
model work.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-05-20 09:30:28 +02:00
Peng Fan
2232d5f5b7 imx: imx8mm_mx8menlo: Enable DM_SERIAL
Enable CONFIG_DM_SERIAL. uart2 and its pinmux was already
marked with u-boot,dm-spl.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-05-20 09:30:28 +02:00
Tim Harvey
d003d89372 board: gateworks: gw_ventana: remove obsolete file
commit 61cf225053 ("board: gateworks: gw_ventana: use comomn GSC driver")
moved to the common GSC driver and moved remaining board-specific
functions to eeprom.c. The functions in gsc.c are no longer used and it
was removed from the Makefile but the file itself was not removed.
Remove it now.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-05-20 09:30:28 +02:00
Tim Harvey
0cba71c1eb board: gateworks: gw_ventana: add support for GPY111 PHY
The MaxLinear GPY111 PHY is being used on some boards due to part
availability. Add support for this PHY which requires a longer reset
post-delay and RGMII delay configuration.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-05-20 09:30:28 +02:00
Tim Harvey
6fc639461b board: gateworks: venice: enable SPL_DM_SERIAL
The uart2 and its pinmux are already marked with u-boot,dm-spl but we
need to move the call to preloader_console_init() after spl_early_init()
to avoid a board hang as dm can't be used until after spl_early_init()
due to the uart driver not enabling the uart clock.

Remove the manual config of the UART pinmux now that it is no longer
needed.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-05-20 09:30:28 +02:00
Rasmus Villemoes
290ffe5788 imx8m: fix reading of DDR4 MR registers
I was trying to employ lpddr4_mr_read() to something similar to what
the imx8mm-cl-iot-gate board is doing for auto-detecting the RAM
type. However, the version in drivers/ddr/imx/imx8m/ddrphy_utils.c
differs from the private one used by that board in how it extracts the
byte value, and I was only getting zeroes. Adding a bit of debug
printf'ing gives me

 tmp = 0x00ffff00
 tmp = 0x00070700
 tmp = 0x00000000
 tmp = 0x00101000

and indeed I was expecting a (combined) value of 0xff070010 (0xff
being Manufacturer ID for Micron). I can't find any documentation that
says how the values are supposed to be read, but clearly the iot-gate
definition is the right one, both for its use case as well as my
imx8mp-based board.

So lift the private definition of lpddr4_mr_read() from the
imx8mm-cl-iot-gate board code to ddrphy_utils.c, and add a declaration
in the ddr.h header where e.g. get_trained_CDD() is already declared.

This has only been compile-tested for the imx8mm-cl-iot-gate
board (since I don't have the hardware), but since I've merely moved
its definition of lpddr4_mr_read(), I'd be surprised if it changed
anything for that board.

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Tested-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-05-20 09:30:28 +02:00
Marek Vasut
0adf10a87b ARM: dts: stm32: Configure Buck3 voltage per PMIC NVM on Avenger96
The Avenger96 board comes in multiple regulator configurations.
 - rev.100 or rev.200 have Buck3 preconfigured to 3V3 operation on
   boot and contains extra Enpirion EP53A8LQI DCDC converter which
   supplies the IO. Reduce Buck3 voltage to 2V9 to not waste power.
 - rev.200L have Buck3 preconfigured to 1V8 operation and have no
   Enpirion EP53A8LQI DCDC anymore, the IO is supplied from Buck3.

Configure the Buck3 voltage on this board per PMIC NVM settings and
update buck3 voltage limits in DT passed to OS before booting OS to
prevent potential hardware damage.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-05-19 18:48:50 +02:00
Neal Frager
6be41ea4e6 arm64: zynqmp: zynqmp-sm-k26-revA: Fix DP PLL configuration
This patch fixes the DP audio and video PLL configurations for the zynqmp-sm-k26-revA som.

The Linux DP driver expects the DP to be using the following PLL config:
  - DP video PLL should use the VPLL (0x0)
  - DP audio PLL should use the RPLL (0x3)
  - DP system time clock PLL should use RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.
Register 0xFD1A007C configures the DP system time clock PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/fa7e9abc419c9d7648405d1c62367dbe701d09b8.1652709736.git.michal.simek@amd.com
2022-05-18 13:17:54 +02:00
Neal Frager
2946c551f1 arm64: zynqmp: zynqmp-zcu102-revA: Fix DP PLL configuration
This patch fixes the DP audio and video PLL configurations for the
zynqmp-zcu102-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
  - DP video PLL should use the VPLL (0x0)
  - DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/b2eb87758e0cd4844e1754da8c58fce58d9cf683.1651740949.git.michal.simek@amd.com
2022-05-18 13:17:18 +02:00
Neal Frager
a3659640e0 arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration
This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
  - DP video PLL should use the VPLL (0x0)
  - DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com
2022-05-18 13:17:18 +02:00
Neal Frager
80b8bbbf98 arm64: zynqmp: zynqmp-zcu106-rev1.0: Fix DP PLL configuration
This patch fixes the DP audio and video PLL configurations for the zynqmp-zcu106-rev1.0 evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
  - DP video PLL should use the VPLL (0x0)
  - DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/ae42ad6185418713a473660c8d15903299af7764.1652192319.git.michal.simek@amd.com
2022-05-18 13:17:18 +02:00
Michal Simek
9c563e916c xilinx: Handle board_get_usable_ram_top(0) properly
board_get_usable_ram_top() was designed for getting the top most location
for U-Boot allocation that's why function itself supports via total_size
parameter to find out where the right location for U-Boot is.
But function itself is also reused by different (EFI) which is passing
total_size as 0 to find out where the usable ram top is. For this case
doesn't make sense (a waste time) to call any lmb functions.
That's why simply return gd->ram_top.

And gd->ram_top is filled already based on previous call for U-Boot iself.
The same solution is also used by stm32mp by commit 92b611e8b0 ("stm32mp:
correctly handle board_get_usable_ram_top(0)") and commit c8510e397f
("stm32mp: Fix board_get_usable_ram_top()").

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/44470619e74f3e480b70deac24578e3e0d5c907e.1651225945.git.michal.simek@amd.com
2022-05-13 09:10:02 +02:00
Tom Rini
21e25992c8 Add new STM32 MCU boards and Documentation
STM32 programmer improvements
 video: support several LTDC HW versions and fix data enable polarity
 board: fix stboard error message, consider USB cable connected when boot device is USB
 configs: stm32mp1: set console variable for extlinux.conf
 configs: stm32mp1: add support for baudrate higher than 115200 for ST-Link
 ARM: stm32mp: Fix Silicon version handling and ft_system_setup()
 phy: stm32-usbphyc: Add DT phy tuning support
 arm: dts: stm32mp15: alignment with v5.18
 ram: Conditionally enable ASR
 mach-stm32mp: psci: retain MCUDIVR, PLL3CR, PLL4CR, MSSCKSELR across suspend
 configs: Use TFTP_TSIZE on DHSOM and STMicroelectronics boards
 ARM: stm32: Use default CONFIG_TFTP_BLOCKSIZE on DHSOM
 pinctrl: stm32: rework GPIO holes management
 -----BEGIN PGP SIGNATURE-----
 
 iQJQBAABCgA6FiEEXyrViUccKBz9c35Jysd4L3sz/6YFAmJ6U4QcHHBhdHJpY2Uu
 Y2hvdGFyZEBmb3NzLnN0LmNvbQAKCRDKx3gvezP/pg4SEACFSVRcCa/7r2QXObqk
 mORtlp6OrZLfCQGMugv9Oj0W+L4nanJEZEJknhasoHgm5CyTuCGEm7qxgWWBKA9j
 yeCfcpToXrY4cIMgsPR4tpZ9jn4fLsHFBEvCVMEoOp/K2ZI27lfJ0/OeRlgKdg11
 dTmM+J96vw7ltLHeN+yRWY1XgaGsBreqNJSO2mCGrAbbTJXSTrNZxP4wonTvKkFI
 GyTIgRaQA9ggk7/IhalusEEGIF0aaaX/z7uBXqEGkCyOTacLG5rxYNGCoaPdv1Bl
 fT7spZy1bAx3ABq/yJeF38Wi5jCXf55Z3cwYK0+tpJVUlAncYpJJBiyTERtR24OK
 NeDTWkw4e071xPDfmUFB96eINDQ8KXBRRcK2n2b6nW43loYtqgafrx4prL8W2T/u
 mB1WquNwjqdNN43iKAcyArrooOG18sJzRE3uAM6W4fjPx8DAHtYdaO3du3Mb5Kzz
 YaqgVO88NDsYaQRJCnmdQ7KDFToMy5A6btj2LhnYQ/3CMhktkg2RHC0aERGgNJLs
 ifVj3kvc+l8UwomvNOMjNket+AH7hbp64lbAfjAwzcgOGROKNyOslsr33qibg4lQ
 SQKl15wFDHLAcP2tj9QoUFO+97FqDXWBIzoEhDDBqfpVNRx25R7NePUkkA+0dHTS
 VedeNG6p2yFeW2UTAD4nYP9xWA==
 =s7xn
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20220510' of https://source.denx.de/u-boot/custodians/u-boot-stm

Add new STM32 MCU boards and Documentation
STM32 programmer improvements
video: support several LTDC HW versions and fix data enable polarity
board: fix stboard error message, consider USB cable connected when boot device is USB
configs: stm32mp1: set console variable for extlinux.conf
configs: stm32mp1: add support for baudrate higher than 115200 for ST-Link
ARM: stm32mp: Fix Silicon version handling and ft_system_setup()
phy: stm32-usbphyc: Add DT phy tuning support
arm: dts: stm32mp15: alignment with v5.18
ram: Conditionally enable ASR
mach-stm32mp: psci: retain MCUDIVR, PLL3CR, PLL4CR, MSSCKSELR across suspend
configs: Use TFTP_TSIZE on DHSOM and STMicroelectronics boards
ARM: stm32: Use default CONFIG_TFTP_BLOCKSIZE on DHSOM
pinctrl: stm32: rework GPIO holes management
2022-05-10 15:28:02 -04:00
Patrice Chotard
e198d4fe7c doc: Add documentation for STM32 MCUs
Add documentation for STM32 MCUs (F4, F7 and H7 series).

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-05-10 13:56:12 +02:00
Patrice Chotard
eda7b6a632 configs: stm32746g-eval: Add stm32746g-eval_spl_defconfig
Add stm32746g-eval_spl_defconfig for stm32746g evaluation board to
build SPL.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-05-10 13:56:12 +02:00
Patrice Chotard
e9881a1e75 configs: stm32746g-eval: Add stm32746g-eval_defconfig
Add stm32746g-eval_defconfig for stm32746g evaluation board to
build U-Boot proper.

Full board description can be found here :
https://www.st.com/en/evaluation-tools/stm32746g-eval.html

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-05-10 13:56:12 +02:00
Patrice Chotard
16613edbc1 board: stm32f746-disco: Fix dram_init() in none SPL config
Replace CONFIG_SUPPORT_SPL by CONFIG_SPL_BUILD to allow
dram_init() execution when using none SPL defconfig
(stm32f746-disco_defconfig).

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-05-10 13:56:12 +02:00
Patrice Chotard
969bc0aece configs: stm32f769-disco: Rename stm32f769-disco_defconfig to stm32f769-disco_spl_defconfig
The current stm32f769-disco_defconfig file supports SPL, rename it to
stm32f769-disco_spl_defconfig to reflect the supported configuration.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-05-10 13:56:11 +02:00
Patrice Chotard
0d4ef527da configs: stm32f746-disco: Rename stm32f746-disco_defconfig to stm32f746-disco_spl_defconfig
The current stm32f746-disco_defconfig file supports SPL, rename it to
stm32f746-disco_spl_defconfig to reflect the supported configuration.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-05-10 13:56:11 +02:00
Patrice Chotard
67899c2201 board: st: stm32mp1: Consider USB cable connected when boot device is USB
Always consider USB cable is connected when USB boot device is detected.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-05-10 13:56:11 +02:00
Patrick Delaunay
1494e37586 board: st: common: fix the error messages in stboard command
Add missing \n at the end of the error trace

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-05-10 10:56:39 +02:00
Pali Rohár
c7484ce091 Nokia RX-51: Convert to CONFIG_DM_SERIAL
For CONFIG_DM_SERIAL it is required to increase CONFIG_SYS_MALLOC_F_LEN as
default value is not enough for memory hungry CONFIG_DM_SERIAL code.

Signed-off-by: Pali Rohár <pali@kernel.org>
Tested-by: Merlijn Wajer <merlijn@wizzup.org>
2022-05-09 13:40:24 -04:00
Gireesh Hiremath
655a93f079 am335x, guardian: Drop non DM_I2C code
On this platform DM_I2C and SPL_DM_I2C enabled.
Remove legacy code.

Signed-off-by: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2022-05-09 13:40:24 -04:00
Masami Hiramatsu
55a8bb94f9 board: synquacer: developerbox: Remove Masami from MAINTAINERS
Remove Masami Hiramatsu from MAINTAINERS since he will leave
Linaro and his email will be not available anymore.

Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
2022-05-05 09:28:48 -04:00
Jim Liu
84335544ea arm: nuvoton: Add support for Nuvoton NPCM750 BMC
Add basic support for the Nuvoton NPCM750 EVB (Poleg).

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
2022-05-05 09:28:47 -04:00
Marek Behún
0ce0feb046 arm: mvebu: turris_mox: Use DM registered MDIO
In order to be able to get rid of the non-DM MDIO bus registered in
mvneta driver, start using the DM registered one in Turris MOX board
code.

This also allows us to drop the hack introduced in MOX' -u-boot.dtsi
file.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-05-04 07:05:51 +02:00
Marek Behún
a2b2542992 arm: mvebu: Espressobin: Use DM registered MDIO to configure switch
In order to be able to get rid of the non-DM MDIO bus registered in
mvneta driver, we need to stop using board_network_enable() and instead
use the DM registered MDIO device to configure switch in
last_stage_init().

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-05-04 07:05:51 +02:00
Stefan Roese
1770808199 mips: octeon: nic23: Enable ethernet support
This patch enables the Kconfig symbols needed for full ethernet support
on the NIC23. Additionally board specific setup is done, mostly GPIOs
related to SFP / GPIO configuration. With this, ethernet can be used on
this board. Here an example of a tftp load:

=> tftp ffffffff81000000 big
Using ethernet-mac-nexus@11800e2000000 device
TFTP from server 192.168.1.5; our IP address is 192.168.1.247
Filename 'big'.
Load address: 0xffffffff81000000
Loading: ##################################################  10 MiB
         9.7 MiB/s
done
Bytes transferred = 10485760 (a00000 hex)

Signed-off-by: Stefan Roese <sr@denx.de>
2022-05-04 07:05:51 +02:00
Tom Rini
edb6982b58 Merge branch '2022-05-02-add-verifying-program-loader'
To quote the author:

U-Boot provides a verified-boot feature based around FIT, but there is
no standard way of implementing it for a board. At present the various
required pieces must be built up separately, to produce a working
implementation. In particular, there is no built-in support for selecting
A/B boot or recovery mode.

This series introduces VPL, a verified program loader phase for U-Boot.
Its purpose is to run the verified-boot process and decide which SPL
binary should be run. It is critical that this decision happens before
SPL runs, since SPL sets up SDRAM and we need to be able to update the
SDRAM-init code in the field.

Adding VPL into the boot flow provides a standard place to implement
verified boot. This series includes the phase itself, some useful Kconfig
options and a sandbox_vpl build for sandbox. No verfied-boot support is
provided in this series.

Most of the patches in this series are fixes and improvements to docs and
various Kconfig conditions for SPL.
2022-05-02 19:02:44 -04:00
Simon Glass
9ae25b9ac9 sandbox: Add a build for VPL
Add an initial VPL build for sandbox. This includes the flow:

   TPL (with of-platdata) -> VPL -> SPL -> U-Boot

To run it:

   ./tpl/u-boot-tpl -D

The -D is needed to get the default device tree, which includes the serial
console info.

Add a Makefile check for OF_HOSTFILE which is the option that enables
devicetree control on sandbox.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-05-02 09:58:13 -04:00
Chris Packham
08dc62c152 ARM: mvebu: x530: set MPP55 to gpio
MPP55 is used as a reset connected to the L3 switch chip. This doesn't
matter for u-boot as it doesn't use the L3 switch but it is useful to
be able to toggle the switch in/out of reset for the OS.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-05-02 07:47:26 +02:00
Pali Rohár
363d9f2c2f arm: mvebu: turris_omnia: Fix SYS_RSTOUT_* macro names
This is A385 register.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-05-02 07:47:26 +02:00
Tony Dinh
dbd2a382c1 arm: kirkwood: nsa310s: Use Marvell uclass mvgbe and PHY driver for DM Ethernet
The Zyxel NSA310s board has the network chip Marvell Alaska 88E1318S.
Use uclass mvgbe and the compatible driver M88E1310 driver to bring
up Ethernet.

- Use uclass mvgbe to bring up the network. And remove ad-hoc code.
- Remove CONFIG_RESET_PHY_R.
- Enable CONFIG_PHY_MARVELL to properly configure the network.
- Add phy mode RGMII to kirkwood-nsa310s.dts
- Miscellaneous changes: Move constants to .c file and remove header file
board/zyxel/nsa310s/nsa310s.h, add support for large USB and SATA HDDs,
use BIT macro, add/cleanup comments, and cosmetic changes.

Note that this patch is depended on the following patch:
https://patchwork.ozlabs.org/project/uboot/patch/20220412201820.10291-1-mibodhi@gmail.com/

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
2022-05-02 07:47:26 +02:00
Pali Rohár
1ae8a5fb6a arm: mvebu: turris_omnia: Fix RESET button message
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
2022-05-02 07:29:55 +02:00
Pali Rohár
73c7db73e8 arm: mvebu: turris_omnia: Add support for USB3.0 mode in WWAN MiniPCIe slot
PCIe Mini CEM 2.1 spec added support for USB3.0 mode on MiniPCIe cards.
USB3.0 and PCIe share same pins and only one function can be active at the
same time. PCIe Mini CEM 2.1 spec says that determining function is
platform specific and spec does not define any dedicated pin which could
say if card is USB3.0-based or PCIe-based.

Implement this platform specific decision (USB3.0 vs PCIe) for WWAN
MiniPCIe slot on Turris Omnia via U-Boot env variable "omnia_wwan_slot",
similarly like is implemented forced mode for MiniPCIe/mSATA slot via
"omnia_msata_slot" env variable. Value "usb3" for "omnia_wwan_slot" would
mean to set USB3.0 mode and value "pcie" original PCIe mode.

A385 SoC on Turris Omnia has configurable fifth SerDes line (exported to
MiniPCIe WWAN slot with SIM card) either to USB3.0 or PCIe functionality,
so implementation of this new PCIe Mini CEM 2.1 feature is simple, by just
configuring SerDes to USB 3.0 mode.

Other twos MiniPCIe slots on Turris Omnia do not have this new
functionality as their SerDes lines cannot be switched to USB3.0
functionality.

Note that A385 SoC does not have too many USB3.0 blocks, so activating
USB3.0 in MiniPCIe cause that one external USB3.0 USB-A port would loose
USB3.0 functionality and would be downgraded just to USB2.0.

By default this MiniPCIe WWAN slot is in PCIe mode, like before.

To set this MiniPCIe WWAN slot to USB3.0 mode, call U-Boot commands:

  => setenv omnia_wwan_slot usb3
  => saveenv
  => reset

Signed-off-by: Pali Rohár <pali@kernel.org>
2022-05-02 07:28:25 +02:00
Pali Rohár
72a9dd264c arm: mvebu: turris_omnia: Signal error when sata/pcie DT mode
Show error message when DT file does not contain sata or pcie node which
should be explicitly disabled. This can happen when U-Boot code for finding
those nodes is incomplete or when those DT nodes are in different
unexpected location. In any case it is needed to know if DT not was not
explicitly disabled as it could mean that combo slots where setup
incorrectly.

Signed-off-by: Pali Rohár <pali@kernel.org>
2022-05-02 07:28:25 +02:00
Pali Rohár
d80276870d arm: mvebu: turris_omnia: Extract code for disabling sata/pcie
Move code for disabling sata and pcie DT nodes to own functions, so this
code can be called from other places in follow up patches.

Signed-off-by: Pali Rohár <pali@kernel.org>
2022-05-02 07:28:25 +02:00
Pali Rohár
1da19dcf3b arm: mvebu: turris_omnia: Allow to configure mSATA slot via env variable
Some PCIe-based MiniPCIe cards are broken and they do not ground PIN 43
which is required by PCIe mini CEM specs. Such broken cards are incorrectly
detected as mSATA cards because SATA specs requires that PIN 43 on mSATA
cards has to be disconnected.

PIN 43 on Turris Omnia is used only for MiniPCIe/mSATA card detection by
software in U-Boot SPL. Allow to override that U-Boot SPL detection by a
new "omnia_msata_slot" env variable (to value "pcie" or "sata") so broken
MiniPCIe cards can be used in combo mSATA/MiniPCIe slot too.

As configuration of PCIe vs SATA functionality is done in U-Boot SPL,
it is required to change env variable in permanent storage and reset the
board to take effect.

To force PCIe mode for broken MiniPCIe cards, call U-Boot commands:

  => setenv omnia_msata_slot pcie
  => saveenv
  => reset

Signed-off-by: Pali Rohár <pali@kernel.org>
2022-05-02 07:28:25 +02:00
Pali Rohár
8ead243ecc arm: mvebu: turris_omnia: Define only one serdes map variable
By default use primary serdes map with PCIe function in combined
miniPCIe/mSATA slot. When SATA is detected change serdes map variable at
runtime.

Signed-off-by: Pali Rohár <pali@kernel.org>
2022-05-02 07:28:25 +02:00
Pali Rohár
d6ba5c4f92 arm: mvebu: turris_omnia: Provide env_sf_get_env_addr() function
BootROM maps SPI Flash to fixed address 0xD4000000 and this mapping is
active also when BootROM is executing binary kwbimage headers, which
includes also U-Boot SPL.

Therefore no initialization code is required to access SPI Flags from
U-Boot SPL. In proper U-Boot it is remapped to other location.

So in mvebu implementation of env_sf_get_env_addr() function returns
0xD4000000 when running in SPL and NULL when in proper U-Boot.

This change would allow to use U-Boot ENV in U-Boot SPL. Normally it is not
possible to read ENV because it is too big and U-Boot SPL does not have
such big malloc() pool to real all ENV variables.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
2022-05-02 07:28:25 +02:00
Marek Vasut
69245e406e led: Drop led_default_state()
This function is empty, drop it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Steven Lawrance <steven.lawrance@softathome.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-04-28 09:26:44 -04:00
Tom Rini
8b2b125e95 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xx
fsl-qoriq: Fixes and updates on fsl-layerscape
mpc85xx: fixes and code cleanup
2022-04-27 09:19:41 -04:00
Sean Anderson
7026c1ee70 board: ls1046afrwy: Remove Manish Tomar's email
Manish Tomar's email bounces. Remove it, and reassign the config he was
maintaining to the primary maintainer for the board.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-04-26 17:18:39 +05:30
Pali Rohár
71dcf8128c board: freescale: p1_p2_rdb_pc: Move ifdef for USB/eLBC check to correct place
Whole section about USB/eLBC configuration seems to be P1020 specific. So
add ifdefs to not compile it on other platforms (e.g. P2020).

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-04-26 17:18:39 +05:30
Pali Rohár
0b30cb3de7 board: freescale: p1_p2_rdb_pc: Fix page attributes for second 1G SDRAM map
Like for first 1G SDRAM map, do not enable Caching-inhibited nor Guarded
attribute for second 1G SDRAM mapping. Whole 2G SDRAM should use caches and
also allow speculative loading (by not setting Guarded attribute).

Also enable Memory Coherency attribute for second 1G SDRAM map. In commit
316f0d0f8f ("powerpc: mpc85xx: Fix static TLB table for SDRAM") it was
enabled for all SDRAM maps on all other boards, just missed this one case.

As a last thing, first 1G SDRAM map has wrong comment, so adjust it.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-04-26 17:18:39 +05:30
Pali Rohár
0992c2be77 board: freescale: p1_p2_rdb_pc: Do not set MPC85xx_PMUXCR_SDHC_WP bit when SDHC_WP is used as GPIO
When MPC85xx_PMUXCR_SDHC_WP is set then SDHC controller automatically makes
inserted SD card readonly if GPIO[9] is active.

In some design GPIO[9] pin does not have to be connected to SD card
write-protect pin and can be used as GPIO.

So do not set MPC85xx_PMUXCR_SDHC_WP bit when GPIO[9] is not used for
SDHC_WP functionality.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-04-26 17:18:39 +05:30
Pali Rohár
4aceaec585 board: freescale: p1_p2_rdb_pc: Detect both P2020 SD switch configurations
As written in comment, P2020 has two possible SD switch configurations.
Extend code to detect both of them.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-04-26 17:18:39 +05:30
Pali Rohár
ccad59dc5c board: freescale: p1_p2_rdb_pc: Do not hang in checkboard()
Like in all other checks in checkboard() function, do not hang on error.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-04-26 17:18:39 +05:30
Pali Rohár
03edf23376 board: freescale: p1_p2_rdb_pc: Allow to compile it without env support
When env support is disabled then usage of env_init() or env_relocate()
generates linker errors. So do not compile env_init() or env_relocate()
in SPL code when env support is disabled in SPL.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-04-26 17:18:39 +05:30
Michael Walle
20759b2973 board: sl28: add basic PSCI implementation
For now, this only provides reset and poweroff functions.

Signed-off-by: Michael Walle <michael@walle.cc>
[Rebased]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-04-26 17:13:57 +05:30
Michael Walle
49bb245f1d armv8: psci: add ARMV8_PSCI_RELOCATE Kconfig option
There is an user-selectable SYS_HAS_ARMV8_SECURE_BASE, which has the
same meaning but is just for the ls1043ardb board. As no in-tree config
uses this, drop it and replace it with something more sophiticated:
ARMV8_PSCI_RELOCATE. This option will then enable the ARMV8_SECURE_BASE
option which is used as the base to relocate the PSCI code (or any code
in the secure region, but that is only PSCI). A SoC (or board) can now
opt-in into having such a secure region by enabling
SYS_HAS_ARMV8_SECURE_BASE. Enable it for the LS1043A SoC, where it was
possible to relocate the PSCI code before as well as on the LS1028A SoC
where there will be PSCI support soon.

Additionally, make ARMV8_PSCI and SEC_FIRMWARE_ARMV8_PSCI exclusive.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-04-26 17:13:57 +05:30
Durai Manickam KR
c8532d3f9e configs: Add sam9x60_curiosity_mmc_defconfig
Add boot from SDMMC (sdcard) support for sam9x60_curiosity.

Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com>
2022-04-26 09:50:24 +03:00
Durai Manickam KR
b07a022964 board: Add sam9x60_curiosity support
Add board files, Kconfig, Makefile and MAINTAINERS.

Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com>
2022-04-26 09:50:24 +03:00
Tom Rini
11232139e3 nds32: Remove the architecture
As removal of nds32 has been ack'd for the Linux kernel, remove support
here as well.

Cc: Rick Chen <rick@andestech.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Rick Chen <rick@andestech.com>
2022-04-25 16:04:05 -04:00
Tom Rini
6e2af641e4 u-boot-imx-20220422
-------------------
 
 - Switch to DM_SERIAL
 - Drop MMCROOT
 - several cleanup
 
 CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/11815
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCYmJq1Q8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76ZlxQCfQNPkQVf10kjENID/D9mu+Hl2tMEAnj8AMOyF
 iQrcw6oegrVvZZXV+s2J
 =XjAE
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20220422' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

u-boot-imx-20220422
-------------------

- Switch to DM_SERIAL
- Drop MMCROOT
- several cleanup

CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/11815
2022-04-22 08:12:20 -04:00
Ying-Chun Liu (PaulLiu)
84adf92968 imx8mm-cl-iot-gate: Remove redundant board_fix_fdt()
In arch/arm/mach-imx/imx8m/soc.c there's an implementation of
board_fix_fdt() introduced by commit 35bb60787b. Remove the
redundant one to avoid failed to build from source when enabling
CONFIG_OF_BOARD_FIXUP.

Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: uboot-imx <uboot-imx@nxp.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-04-21 23:00:26 +02:00
Peng Fan
151a030063 arm: set cntfrq_el0 if CONFIG_COUNTER_FREQUENCY is valid
Since COUNTER_FREQUENCY is obselete, so set cntfrq_el0 if
CONFIG_COUNTER_FREQUENCY is valid

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
2022-04-21 15:27:18 -04:00
Peng Fan
d8c033a9cd xilinx: versal: board: use CONFIG_COUNTER_FREQUENCY
Since versal has CONFIG_COUNTER_FREQUENCY, so use it. And
COUNTER_FREQUENCY will be dropped.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
2022-04-21 14:32:40 -04:00
Tom Rini
e50f66e364 Merge https://source.denx.de/u-boot/custodians/u-boot-marvell
- mrvl_uart.sh: Remove script (Pali)
- Fix Espressobin build for configs where ENV is not in SPI (Rogier)
- mvebu: a37xx: Add support for reading OTP (Pali)
- mvebu: uDPU: Ethernet fixes and misc DT and defconfig changes (Robert)
- mvebu: Add support for reading LD0 and LD1 eFuse (Pali)
- kwboot: Replace fstat()+st_size by lseek()+SEEK_END (Pali)
- mvebu: turris_omnia: Enable CONFIG_CMD_FUSE (Pali)
- arm: Add CONFIG_SPL_SYS_NO_VECTOR_TABLE used on 32bit MVEBU (Pali)
- mvebu: a37xx: Add support for writing Security OTP values (Pali)
- mvebu: turris: Misc enhancements and cleanups / fixes (Pali)
- Sheevaplug : Use Marvell uclass mvgbe and PHY driver for Ethernet (Tony)
2022-04-21 11:44:54 -04:00
Michael Trimarchi
0016e62813 board: bsh: imx8mn_bsh_smm_s2/s2pro: enable DM_SERIAL
Enable DM_SERIAL for both U_Boot and the SPL. The uart4 and its pinmux
are already marked with u-boot,dm-spl but we need to move the call to
preloader_console_init() after spl_init() to avoid a board hang
as dm can't be used until after spl_init().

Remove the manual config of the UART pinmux now that it is no longer
needed.

Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Cc: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Tested-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
2022-04-21 15:18:25 +02:00
Peng Fan
a497740f4e imx: imx8mn_evk: enable CONFIG_DM_SERIAL
Enable CONFIG_DM_SERIAL. uart2 and its pinmux was already
marked with u-boot,dm-spl.

move the preloader_console_init() call after spl_init() to
avoid board hang

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-04-21 15:18:25 +02:00
Peng Fan
bf6e0b9fd2 imx: imx8mm_evk: enable CONFIG_DM_SERIAL
Enable CONFIG_DM_SERIAL. uart2 and its pinmux was already
marked with u-boot,dm-spl.

move the preloader_console_init() call after spl_early_init() to
avoid board hang

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-04-21 15:18:25 +02:00
Peng Fan
ae188eb61c imx: imx8mp_evk: enable CONFIG_DM_SERIAL
Enable CONFIG_DM_SERIAL. uart2 and its pinmux was already
marked with u-boot,dm-spl.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-04-21 15:18:25 +02:00
Paul Barker
a95cd68d51 board: ti: am335x: Add support for BBE Extended WiFi
The Sancloud BeagleBone Enhanced Extended WiFi (BBE Extended WiFi) has
its own devicetree file and the board can be identified by the 2nd
letter of the config string within the common EEPROM.

Signed-off-by: Paul Barker <paul.barker@sancloud.com>
2022-04-21 09:08:57 -04:00
Paul Barker
cde726442b board: ti: am335x: Add BBE Lite support
The Sancloud BeagleBone Enhanced Lite (BBE Lite) has its own devicetree
file and the board can be identified by the 2nd letter of the config
string within the common EEPROM.

Signed-off-by: Paul Barker <paul.barker@sancloud.com>
2022-04-21 09:08:57 -04:00
Tony Dinh
ac47bd230c arm: kirkwood: Sheevaplug : Use Marvell uclass mvgbe and PHY driver for Ethernet
The Globalscale Technologies Sheevaplug board has the network chip
Marvell 88E1116R. Use uclass mvgbe and the compatible driver M88E1310
driver to bring up Ethernet.

- Remove CONFIG_RESET_PHY_R symbol from all board files
- Use uclass mvgbe to bring up the network. And remove ad-hoc code.
- Enable CONFIG_PHY_MARVELL to properly configure the network.
- Miscellaneous changes: Move constants to .c file and remove header file
board/Marvell/sheevaplug/sheevaplug.h, use BIT macro, and add/cleanup
comments.

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
2022-04-21 13:14:52 +02:00
Marcel Ziswiler
fc102c87c1 board: toradex: drop colibri pxa270 support
The Colibri PXA270 has been end-of-life since quite a while and would
require more and more maintenance (e.g. DM conversions).

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-04-21 12:48:30 +02:00
Tim Harvey
2395625209 board: gateworks: venice: add imx8mp-venice-gw740x support
The GW74xx is based on the i.MX 8M Plus SoC featuring:
 - LPDDR4 DRAM
 - eMMC FLASH
 - Gateworks System Controller
 - PCIe Gen 3.0 switch (build option)
 - USB 3.0 HUB
 - USB Type-C front panel connector
 - GPS
 - 3-axis accelerometer
 - CAN bus
 - 6x GbE RJ45 front-panel jacks
  - 1x IMX8M FEC RGMII GbE (with Passive PoE)
  - 5x IMX8M EQOS RGMII 6 port GbE Switch
    (1x with 802.3af class 5 Active PoE)
 - RS232/RS485/RS422 serial transceiver
 - MIPI header (DSI/CSI/GPIO/PWM/I2S)
 - DigI/O header (UART/GPIO/I2C/ADC)
 - 802.11ac WiFi
 - Bluetooth BLE
 - 3x MiniPCIe sockets with PCI/USB
 - 1x M.2 Socket with USB2.0, PCIe, and dual-SIM
 - PMIC
 - Wide range DC input supply (8V to 60V DC)

Do the following to add support for this and future imx8mp-venice boards:
 - add dts
 - add DRAM config
 - add PMIC config
 - add IMX8MP support in spl.c and venice.c

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-04-21 12:44:24 +02:00
Tim Harvey
93de85c9d7 board: gateworks: venice: add additional levels for dtb name match
Gateworks produces many products from a single PCB with subloaded
components. Add an additional two levels of dtb name matching so that
for example a GW7400-A matches the dtb name of gw74xx.dtb

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-04-21 12:44:24 +02:00
Tim Harvey
61cf225053 board: gateworks: gw_ventana: use comomn GSC driver
Use the common GSC driver.

This allows us to do some additional cleanup:
 - use the GSC driver functions
 - move waiting for the EEPROM to the SPL int (it will always be ready
   after this)
 - move eeprom functions into eeprom file and elimate GSC_I2C_BUS
 - eliminate some redundant EEPROM reads (the EEPROM must be read in
   SPL before relocation, in SPL after relocation, and in U-Boot init.
   All subsequent uses can use the global structure)
 - remove unnecessary header files and alphabatize includes

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-04-21 12:44:24 +02:00
Tim Harvey
fb9ec33878 board: gateworks: venice: use common GSC driver
Use the common GSC driver.

This allows us to do some additional cleanup:
 - rename gsc{.c,.h} to eeprom{.c.h} for clarity
 - collapse eeprom_get_dev
 - remove unnecessary header files and alphabatize includes

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-04-21 12:44:23 +02:00
Marcel Ziswiler
405c97fd1d configs: tdx: apalis_imx6: drop hw v1.0 support
Drop optional support for the ancient Apalis iMX6 V1.0 hardware which
had the UART wired as DCE rather than DTE.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-04-21 12:44:23 +02:00
Marcel Ziswiler
4625ff6521 board: colibri_imx7: fix usb start on solo
This fixes the following crash when run on a Colibri iMX7S aka solo:

Colibri iMX7 # usb start
starting USB...
Bus usb@30b10000: USB EHCI 1.00
Bus usb@30b20000:

The i.MX 7Solo has only one single USB OTG1 but no USB host port. Trying
to initialize the nonexisting port just crashes.

While at it also drop board_usb_phy_mode() which is also no longer used
in the driver model age.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-04-21 12:44:23 +02:00
Denys Drozdov
47bcc0d056 toradex: apalis-imx8x: drop support for apalis imx8x
Drop Apalis iMX8X platform as it never left sample state and is no
longer supported.

Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-04-21 12:44:23 +02:00
Pali Rohár
08b99b6775 board: turris: Rename atsha204a@64 DT node to crypto@64
DT node name should be generic, therefore rename atsha204a@64 to crypto@64.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
2022-04-21 12:31:36 +02:00
Pali Rohár
98bbb6e7ab board: turris: Allow to specify first eth idx of first MAC address
Turris Omnia uses first MAC address from OTP for second ethernet interface.
Second MAC address for third interface and third MAC address for first
interface.

Other Turris routers do not have this rotate by one mapping. So add
function parameter for specifying id of the first ethernet interface.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
2022-04-21 12:31:36 +02:00
Pali Rohár
ada791db3e board: turris: Do not cache Atsha device in BSS
Atsha device is used prior relocation and at this early stage BSS does not
have to be ready yet. So do not cache Atsha device in BSS.

Fixes support for other Turris routers.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
2022-04-21 12:31:36 +02:00
Pali Rohár
6ac08dc1a8 board: turris: Move Turris Atsha OTP code to separate file
OTP code is not Atsha generic but also it is not Omnia specific. It is
common for all Turris routers which use Atsha cryptochip for storing OTP.
So move this common Turris specific Atsha OTP code from Turris Omnia into
separate file. It will be used also by other Turris routers.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
2022-04-21 12:31:36 +02:00
Pali Rohár
85df8f9a21 arm: mvebu: a37xx: Extend mbox_do_cmd() code
Allow to specify input parameters, define all available mbox commands
supported by CZ.NIC's secure firmware and also Marvell's fuse.bin firmware
and fix parsing response from Marvell OTP commands.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-04-21 12:31:36 +02:00
Pali Rohár
46ce9c78a9 arm: mvebu: a37xx: Move generic mbox code to arch/arm/mach-mvebu
Generic A3720 mbox code is currently in Turris Mox specific board file
board/CZ.NIC/turris_mox/mox_sp.c. Move it to board independent arch file
arch/arm/mach-mvebu/armada3700/mbox.c.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-04-21 12:31:36 +02:00
Rogier Stam
a37b68820c arm: mvebu: Fix Espressobin build for configs where ENV is not in SPI
When storing the UBoot Environment in for example EXT4,
the U-Boot build is broken for several reasons:
1. armada-385-turris-omnia-u-boot.dtsi will not allow
   CONFIG_ENV_OFFSET and CONFIG_ENV_SIZE to be undefined
2. armada-37xx/board.c ft_board_setup function does not
   exist if CONFIG_ENV_IS_IN_SPI_FLASH is not defined

This commit changes these files so that selecting a
different location for the environment is possible.

Signed-off-by: Rogier Stam <rogier@unrailed.org>
Reviewed-by: Pali Rohár <pali@kernel.org>
2022-04-21 12:31:26 +02:00
Tom Rini
24c904f309 Convert CONFIG_SYS_MEM_TOP_HIDE to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_MEM_TOP_HIDE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-19 14:52:34 -04:00
Michal Simek
fcbdd7a070 .mailmap: Start to use new amd.com email address
Xilinx has been acquired by AMD that's why emails should be also updated.
The patch is updating .mailmap file and also MAINTAINERS files as was done
by commit 5cd1ecb994 ("ppc: qemu: Update MAINTAINERS for correct email
address").
The rest of my emails are not going to change.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-04-19 14:51:11 -04:00
Johan Jonker
8f47414466 board: rk3288: add more DT files to MAINTAINERS
A number of rk3229/rk3288 DT files are synced from Linux.
Add a maintainer to look after them and to help with
review and testing.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-04-18 11:25:13 +08:00
Johan Jonker
8042717afa board: google: veyron: add more DT files to MAINTAINERS
The Google Veyron rk3288 DT files are synced from Linux.
Add a maintainer to look after them and to help with
review and testing.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-04-18 11:25:13 +08:00
Johan Jonker
62fcd72ef2 rockchip: rk3066: add Rikomagic MK808 board
MK808 is a RK3066-based board with 1 USB host and 1 USB OTG port,
HDMI and a micro-SD card slot. It also includes on-board NAND
and 1GB of SDRAM.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-04-18 11:25:13 +08:00
Tom Rini
9859465bfe Pull request for efi-2022-07-rc1-2
Documentation:
 
 * Describe env command
 
 UEFI
 
 * simplify Unicode string functions
 * clean up the usage of GUIDs for capsule updates
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAmJZTvsACgkQxIHbvCwF
 GsTbOg//XtOKXKHsWIq0cDgxxUTM2iSWCwzw2rSO3VPbzjeRekBCH3+I6D6hCHmp
 ikSPB8LBRRMEkBPq18LdXY9oaV6keRGgLNtiLATKLMHsJ9USkCqNzdSegCIWFl0T
 2N5Rm/qdh90csGyIzEk+qPOLBNP/St/aTO6n7b9+FgZ6Hy2dwXTjnNzPFEnz3hCY
 KjlOxIWsgofb9Iem4f+mMhgiBjM161yqWMd2ND/EDn3RRjrAh/ZWRcD/nWirZxeO
 uwn+8bMjDfO83yICS1txp6mbvtFHhrktSo6hc7Ga5m+5kmlPBcgKnKEIUgrKuNd/
 Jyr12MLBtI7oyETr+CY9vPQTciWBU17cW2TO7CIBDQt3QtfvVBrWaGe4barPLPzx
 hvyKzrflRDTFUKoG+f/XGN2YSvYw+QXVXZjBqYDwOepT7oq6lWpf7gtxNQNG5RZI
 uOwk95VT/cVh7S8qp1ioD+tGtvA9PeMyuh8mryD2kYrJh4bbGimfyP2Z6e/aIRNi
 RnczTAFDXoA4g32DP8/3Im43rSIv685e4N0YnDF+ZyKALxyflZAPXT0MY8FLfGyE
 x6Zb1t45W8thIDhBLNjurBge4NTFuCq0NM8mszOHMFBgO7PDIMEX+9uZOvhrhYbs
 a7XYFIEIcZZiLqkNjwr7B+D7Ya6q7gYvcqAo6rgtbDNs5QpH/0A=
 =UQMn
 -----END PGP SIGNATURE-----

Merge tag 'efi-2022-07-rc1-2' of https://source.denx.de/u-boot/custodians/u-boot-efi

Pull request for efi-2022-07-rc1-2

Documentation:

* Describe env command

UEFI

* simplify Unicode string functions
* clean up the usage of GUIDs for capsule updates
2022-04-15 14:29:52 -04:00
Tom Rini
7f418ea598 Merge branch 'next' of https://source.denx.de/u-boot/custodians/u-boot-net
- DM9000 DM support
- tftp server bug fix
- mdio ofnode support functions
- Various phy fixes and improvements.

[trini: Fixup merge conflicts in drivers/net/phy/ethernet_id.c
drivers/net/phy/phy.c include/phy.h]
2022-04-15 08:10:32 -04:00
Sughosh Ganu
741ef86728 capsule: board: Add information needed for capsule updates
Add a structure which defines the information that is needed for
executing capsule updates on a platform. Some information in the
structure like the dfu string is used for making the update process
more robust while some information like the per platform image GUIDs
is used for fixing issues. Initialise this structure in the board
file, and use the information for the capsule updates.

Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
2022-04-15 10:43:18 +02:00
Tim Harvey
a1c711046b board: gateworks: venice: add imx8mm-gw7903 support
The GW7903 is based on the i.MX 8M Mini SoC featuring:
 - LPDDR4 DRAM
 - eMMC FLASH
 - microSD socket with voltage select support
 - Gateworks System Controller
 - M.2 A-E Socket with USB2.0 and PCIe
 - MiniPCIe Socket with PCIe, USB2.0, and SIM
 - IMX8M FEC
 - RS232/RS485/RS422 serial transceiver
 - LIS2DE12 3-axis accelerometer
 - front panel LED's
 - off-board isolated digital I/O
 - Wide range DC power input
 - 802.3at PoE
 - PMIC

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-04-13 09:55:26 +02:00
Marek Vasut
d7f72b6830 ARM: dts: imx8mm: Add i.MX8M Mini Toradex Verdin based Menlo board
Add new board based on the Toradex Verdin iMX8M Mini SoM, the MX8Menlo.
The board is a compatible replacement for i.MX53 M53Menlo and features
USB, multiple UARTs, ethernet, LEDs, SD and eMMC.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Cc: Max Krummenacher <max.krummenacher@toradex.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2022-04-12 21:08:23 +02:00
Jesse Taube
558331e0f3 board: freescale: imxrt10..-evk: Fix missing include of serial.h
If FALCON mode is enabled we have a missing include in spl_start_uboot.

Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
2022-04-12 21:08:23 +02:00
Tim Harvey
8f40e7d29f board: gateworks venice: add support for GPY111 phy
The TI DP83867 phy has been replaced with the MaxLinear GPY111 phy due
to part availability.

Add support for it by adding LED config and dt-prop based internal delay
config tx-delay/rx-delay per PHY ID.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
2022-04-12 21:08:22 +02:00
Tim Harvey
255658127b board: venice: add spl_board_loader_name
Implement spl_board_loader_name to provide more meaningful device names
vs MMC1 and MMC2.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-04-12 21:08:22 +02:00
Marek Vasut
bba6cc7018 ARM: dts: imx: Add support for Data Modul i.MX8M Mini eDM SBC
Add support for Data Modul i.MX8M Mini eDM SBC board. This is an
evaluation board for various custom display units. Currently
supported are serial console, ethernet, eMMC, SD, SPI NOR,
USB host and USB OTG.

Reviewed-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2022-04-12 19:10:44 +02:00
Fabio Estevam
ea10bea68d imx8mm-cl-iot-gate: Retrieve the serial number from EEPROM
The serial number is located at offset 0x14 of the EEPROM
under i2c0 bus at address 0x54.

To print the serial number in Linux:

SERNUM=$(cat /proc/device-tree/serial-number)
echo $SERNUM

Signed-off-by: Fabio Estevam <festevam@denx.de>
2022-04-12 19:10:44 +02:00
Fabio Estevam
79bc9dcfa2 imx8mm-cl-iot-gate: Retrieve the MAC address from EEPROM
Currently the eth0 MAC address is randomly assigned.

Retrieve the MAC address from EEPROM.

Signed-off-by: Fabio Estevam <festevam@denx.de>
2022-04-12 19:10:44 +02:00
Fabio Estevam
6924bc7ca2 imx8mm-cl-iot-gate: Retrieve the DDR type from EEPROM
Currently, the DDR type is retrieved by iteracting inside an array
of possible DDR types.

This may take saveral attempts, which slows the overall U-Boot process
and does not provide a good user experience:

U-Boot SPL 2021.07 (Feb 28 2022 - 06:39:32 +0000)
DDRINFO: Cfg attempt: [ 1/6 ]
DDRINFO(M): mr5-8 [ 0xff000010 ]
DDRINFO(T): mr5-8 [ 0x5000010 ]
resetting ...

U-Boot SPL 2021.07 (Feb 28 2022 - 06:39:32 +0000)
DDRINFO: Cfg attempt: [ 2/6 ]
DDRINFO(M): mr5-8 [ 0xff000010 ]
DDRINFO(T): mr5-8 [ 0x1061010 ]
resetting ...

U-Boot SPL 2021.07 (Feb 28 2022 - 06:39:32 +0000)
DDRINFO: Cfg attempt: [ 3/6 ]
DDRINFO(M): mr5-8 [ 0xff000010 ]
DDRINFO(T): mr5-8 [ 0xff000010 ]
Normal Boot
WDT:   Not starting
Trying to boot from MMC2
NOTICE:  BL31: v2.5(release):v2.5
NOTICE:  BL31: Built : 07:12:44, Jan 24 2022

Improve the boot time by retrieving the correct DDR information from
the EEPROM:

U-Boot SPL 2022.04-rc4-00045-g6d02bc40d58c (Mar 19 2022 - 08:22:29 -0300)
DDRINFO(D): Kingston 4096G
DDRINFO(M): mr5-8 [ 0xff000010 ]
DDRINFO(E): mr5-8 [ 0xff000010 ]
Normal Boot
WDT:   Started watchdog@30280000 with servicing (60s timeout)
Trying to boot from MMC2
NOTICE:  BL31: v2.5(release):v2.5
NOTICE:  BL31: Built : 22:28:11, Mar 15 2022

Based on the original code from Compulab's U-Boot.

Tested on a imx8mm-cl-iot-gate board populated with 4GB of RAM.

Signed-off-by: Fabio Estevam <festevam@denx.de>
2022-04-12 19:10:44 +02:00
Fabio Estevam
0bb304e363 imx8mm-cl-iot-gate: Add SPL EEPROM support
imx8mm-cl-iot-gate supports multiple DDR sizes and models.

The DDR type can be retrieved from the EEPROM, so add SPL code
that can be used to get the DDR information.

Based on the original code from Compulab's U-Boot.

Signed-off-by: Fabio Estevam <festevam@denx.de>
2022-04-12 19:10:44 +02:00
Ariel D'Alessandro
6c317fedc7 bsh: imx8mn-smm-s2/pro: Add iMX8MN BSH SMM S2 boards
Introduce BSH SystemMaster (SMM) S2 board family, which consists of:
iMX8MN SMM S2 and iMX8MN SMM S2 PRO boards.

Add support for iMX8MN BSH SMM S2 board:

- 256 MiB DDR3 RAM
- 512MiB Nand
- USBOTG1 peripheral - fastboot.
- 100Mbit Ethernet

Add support for iMX8MN BSH SMM S2 PRO board:

- 512 MiB DDR3 RAM
- 8 GiB eMMC
- USBOTG1 peripheral - fastboot.
- 100Mbit Ethernet

Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
2022-04-12 19:10:44 +02:00
Marek Vasut
9f3370f800 ARM: imx8mm: verdin-imx8mm: Drop superfluous header
The power/bd71837.h should no longer be included, since V1.1 SoM
uses only the PCA9450 PMIC and the BD71837 support was removed.
Drop the header too.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Cc: Max Krummenacher <max.krummenacher@toradex.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-04-12 19:10:44 +02:00
Philippe Schenker
aa6f57d877 board: colibri-imx6ull: fix detecting ethernet phy
Now that it is possible to use regulator-fixed-clock make use
of it. This makes U-Boot detect the PHY on first cold-boot.

This commit also adjusts the code in setup_fec and follows
how it is done in mx6ullevk.c

This commit also slows down the boot-process by about 150ms
as it now waits for the regulator-fixed-clock voltage that
drives the PHY to go up.
If you rely on very fast boot-speeds and don't need ethernet
for your boot-process you can safely revert the changes on
imx6ull-colibri.dtsi

Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-04-12 19:10:44 +02:00
Philippe Schenker
885dcc36af board: colibri-imx6ull: Do not leave variant variable unset
Toradex uses the variable variant to distinguish between modules with
eMMC, NAND with wifi and NAND without wifi.
This variable is set on every boot. Set this variable also if we have a
NAND module without wifi to prevent issues.

Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-04-12 19:10:44 +02:00
Denys Drozdov
c1e6576162 apalis-tk1: avoid save environment unasked
U-Boot should never save the environment unasked.
This also avoids storing broken fdt_module to flash.

Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-04-12 19:10:44 +02:00
Denys Drozdov
b8055ee176 apalis-imx6: avoid save environment unasked
U-Boot should never save the environment unasked.
This also avoids storing broken ftd_file to eMMC.

Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-04-12 19:10:44 +02:00
Marek Vasut
34694f1a3e ARM: imx8mm: verdin-imx8mm: Rework board_early_init()
Rename board_early_init_f() to board_early_init(), since this function
has nothing to do with actual board_early_init_f() as used throughout
U-Boot. The board_early_init() is function local to this board used to
configure UART and WDT pinmux. Wrap init_uart_clk() into this function
so that early UART init would be all in one place. Turn the function
into __weak one, so it could be overridden in case custom carrier board
uses different UART or needs custom IOMUX settings.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Cc: Max Krummenacher <max.krummenacher@toradex.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2022-04-12 19:10:44 +02:00
Peng Fan
1f7f0dd934 imx: imx8ulp_evk: Enable SD/MMC port auto detect
Enable the SD/MMC port auto detect.
The mmc relevant env can be reset when auto detect is enabled.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-04-12 19:10:43 +02:00
Peng Fan
f342c9e381 imx: dynamic setting mmcdev and mmcroot
Dynamic setting mmcdev and mmcroot.
Then when boot linux, we can have correct "root=/dev/mmcblk[x]p2"

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-04-12 19:10:43 +02:00
Ye Li
7b68357130 imx: imx8ulp_evk: call the handshake with M33
If M33 handshake is successful, TPM and DSI panel MUX setting is
done by M33, no need to set them.
If handshake is failed or M33 is not booted, continue the TPM
and DSI panel MUX setting

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-04-12 17:33:57 +02:00
Ye Li
34385a20f3 imx: imx8ulp_evk: Update LPDDR4 PHY settings
Update DDR PHY settings to support LPDDR4 mode only by adjusting
DQ VREF ctrl, ODT and pads drive strength.

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-04-12 17:33:57 +02:00
Clement Faure
c72f1f2f0c imx: imx8ulp: release CAAM for the Cortex-A35
Release the CAAM for the A35 from the SPL.

Signed-off-by: Clement Faure <clement.faure@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-04-12 17:33:57 +02:00
Ye Li
3524540e70 imx: imx8ulp: Load the lposc fuse for dual boot
Found the lposc fuse loading having impact to cpu idle in kernel.
Without the loading in dual boot mode, kernel will hang after idle
for a while.

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-04-12 17:33:56 +02:00
Ye Li
4ab38f6822 imx: imx8ulp_evk: Skip init DDR for reboot in dual boot mode
When M33 is LPAV owner in dual boot, DDR, PCC5, CGC2 won't be reset
during APD reset. So no need to init DDR again after reboot, but need to
reconfigure the PLL4 PFD/PFDDIV/LPAV NIC etc, because kernel may
change or disable some of them.

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-04-12 17:33:56 +02:00
Peng Fan
a092f33305 imx: imx8ulp: add ND/LD clock
Add a new ddr script, defconfig for ND
Configure the clock for ND mode
changing A35 to 960MHz for OD mode
Update NIC CLK for the various modes
Introduce clock_init_early/late, late is used after pmic voltage
setting, early is used in the very early stage for upower mu, lpuart and
etc.

Note: NIC runs at 324MHz, 442MHz has some random kernel hang issue with
cpuidle enabled now.

Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-04-12 17:33:56 +02:00
Ye Li
4ddb33dac5 imx: imx8ulp_evk: Remove PMIC Bucks PWM mode settings
This workaround is not needed on i.MX8ULP proto-1B EVK as board has
fixed the problem. Because we don't support proto-1A any longer,
remove the PMIC settings.

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-04-12 17:33:56 +02:00
Fabio Estevam
8fbca1a8b9 tbs2910: Convert to DM_SERIAL
Conversion to DM_SERIAL is mandatory.

Select DM_SERIAL and add a imx6q-tbs2910-u-boot.dtsi file
that describes the nodes that require dm-pre-reloc, which allows
the DM model to configure the UART pinctrl early.

Remove the now unneeded board UART initialization.

Signed-off-by: Fabio Estevam <festevam@denx.de>
Tested-by: Soeren Moch <smoch@web.de>
2022-04-12 15:36:18 +02:00
Fabio Estevam
473466a5c4 warp7: Remove UART initialization code
With DM_SERIAL selected, it is no longer needed board code to
initialize the UART.

Describe the nodes that require dm-pre-reloc, which allows
the DM model to configure the UART pinctrl early.

Remove the now unneeded board UART initialization.

Signed-off-by: Fabio Estevam <festevam@denx.de>
2022-04-12 15:36:18 +02:00
Tim Harvey
6bec6c169f board: gateworks: gw_ventana: move ft_early_fixups out of common
DM is not used for the SPL and a generic DT is used in the SPL
which requires no fixups. Remove the call in the SPL and move the function
into the U-Boot code.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-04-12 15:36:17 +02:00
Tim Harvey
6d7418c423 board: gateworks: gw_ventana: move GPIO config out of common
Move gpio configuration out of common and into u-boot code as it is
not used by the SPL.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-04-12 15:36:17 +02:00
Tim Harvey
d169313dda board: gateworks: gw_ventana: move SPL uart config out of common
Since DM_SERIAL is used for U-Boot we no longer need legacy UART code in
common.c shared by the SPL and U-Boot. Move the legacy UART config to
the non-DM SPL.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-04-12 15:36:17 +02:00
Tim Harvey
cb339a0021 board: gateworks: gw_ventana: convert to DM_I2C
convert to DM_I2C for U-Boot while leaving SPL legacy I2C:
 - Move I2C config from common to SPL
 - Move PMIC config from common to SPL (no need to re-configure pmic)
 - add DM_I2C support to eeprom/gsc functions shared by SPL and U-Boot

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-04-12 15:36:17 +02:00
Adam Ford
448616126b imx: imx8mm/imx8mn_beacon: Remove redundant code
The Ethernet controller and PHY use the device tree info to
configure themselves, so it's not necessary to manually do it
in the board file.  This permits the removal of a bunch of headers
as well.

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Acked-by: Peng Fan <peng.fan@nxp.com>
2022-04-12 15:36:17 +02:00
Heiko Thiery
775011980b ARM: imx: imx8mn-*-evk: use DM settings for PHY configuration
With the correct settings described in the device-tree the PHY settings
in the board init are no longer required. The values are taken from the
linux device tree.

The PHY latency settings are derived from the phy-mode property and the
voltage seetings are done via the regulator.

Suggested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Tested-by: Marek Vasut <marex@denx.de> # 8MNANOD4-EVK
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-04-12 15:36:17 +02:00
Gaurav Jain
8976556a8a Layerscape: Enable Job ring driver model.
LS(1021/1012/1028/1043/1046/1088/2088), LX2160, LX2162
platforms are enabled with JR driver model.

removed sec_init() call from board files.
sec is initialized based on job ring information processed
from device tree.

Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Reviewed-by: Michael Walle <michael@walle.cc>
2022-04-12 11:20:01 +02:00
Gaurav Jain
cb5d0419f5 crypto/fsl: i.MX8: Enable Job ring driver model.
i.MX8(QM/QXP) - added support for JR driver model.
sec is initialized based on job ring information processed
from device tree.

Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
2022-04-12 11:19:21 +02:00
Gaurav Jain
2cddfcbc75 crypto/fsl: i.MX8M: Enable Job ring driver model.
i.MX8MM/MN/MP/MQ - added support for JR driver model.
sec is initialized based on job ring information processed
from device tree.

Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
2022-04-12 11:18:34 +02:00
Marek Behún
e24b58f5ed net: phy: don't require PHY interface mode during PHY creation
Currently we require PHY interface mode to be known when
finding/creating the PHY - the functions
  * phy_connect_phy_id()
  * phy_device_create()
  * create_phy_by_mask()
  * search_for_existing_phy()
  * get_phy_device_by_mask()
  * phy_find_by_mask()
all require the interface parameter, but the only thing done with it is
that it is assigned to phydev->interface.

This makes it impossible to find a PHY device without overwriting the
set mode.

Since the interface mode is not used during .probe() and should be used
at first in .config(), drop the interface parameter from these
functions. Make the default value of phydev->interface (in
phy_device_create()) to be PHY_INTERFACE_MODE_NA. Move the interface
parameter to phy_connect_dev(), where it should be.

Change all occurrences treewide. In occurrences where we don't call
phy_connect_dev() for some reason (they only configure the PHY without
connecting it to an ethernet controller), set
  phydev->interface = value from phy_find_by_mask call.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
2022-04-10 08:44:13 +03:00
Marek Behún
ffb0f6f488 treewide: Rename PHY_INTERFACE_MODE_NONE to PHY_INTERFACE_MODE_NA
Rename constant PHY_INTERFACE_MODE_NONE to PHY_INTERFACE_MODE_NA to make
it compatible with Linux' naming.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
2022-04-10 08:44:13 +03:00
Marek Behún
123ca114e0 net: introduce helpers to get PHY interface mode from a device/ofnode
Add helpers ofnode_read_phy_mode() and dev_read_phy_mode() to parse the
"phy-mode" / "phy-connection-type" property. Add corresponding UT test.

Use them treewide.

This allows us to inline the phy_get_interface_by_name() into
ofnode_read_phy_mode(), since the former is not used anymore.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Tested-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-04-10 08:44:12 +03:00
Tom Rini
d43cd486ee Convert CONFIG_FSL_QIXIS et al to Kconfig
This converts the following to Kconfig:
   CONFIG_FSL_QIXIS
   CONFIG_QIXIS_I2C_ACCESS

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08 10:46:22 -04:00
Tom Rini
4681e80536 nds32: Migrate CONFIG_DEBUG_LED to Kconfig
Move this value to the board Kconfig file.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08 10:46:22 -04:00
Tom Rini
89e9625fc7 ls1021atwr: Use DEBUG and not CONFIG_DEBUG
We use 'DEBUG' and not 'CONFIG_DEBUG' tree-wide for debug code that is
left in, and not wrapped by some other regular debugging type print
macro.

Cc: Alison Wang <alison.wang@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08 10:46:22 -04:00
Tom Rini
8c3e231b8f at91: Remove unused LED code
These LED files (and CONFIG values) are unused today, remove the code in
question.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08 09:05:20 -04:00
Tom Rini
a62acac12a stm32f429-discovery: Migrate CONFIG_*_LED out of CONFIG namespace
These values are only used in one file, reference them more directly.

Cc: Kamil Lulko <kamil.lulko@gmail.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: uboot-stm32@st-md-mailman.stormreply.com
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-04-08 09:05:20 -04:00
Tom Rini
e0f0f1836b corvus: Migrate CONFIG_*_LED out of CONFIG namespace
This code is only used on the corvus platform, so migrate the LED on/off
code to this platform and remove it from the CONFIG namespace.  In
theory, this should likely be moved to the modern GPIO LED driver as a
further cleanup.

Cc: Heiko Schocher <hs@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2022-04-08 09:05:20 -04:00
Tom Rini
f01928e232 arm: integrator: Migrate platform-specific options and cleanup armcoremodule.h
This converts the following to Kconfig:
   CONFIG_CM_INIT
   CONFIG_CM_REMAP
   CONFIG_CM_SPD_DETECT
   CONFIG_CM_MULTIPLE_SSRAM
   CONFIG_CM_TCRAM

We make the first three of these options be always enabled, as that
matches usage.  We select the last two based on how they were defined in
armcoremodule.h.  This also allows us to remove some unused code in
board/armltd/integrator/lowlevel_init.S

Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08 09:05:19 -04:00
Heinrich Schuchardt
22e324c638 riscv: enable CONFIG_CMD_SBI for QEMU boards
Let CONFIG_TARGET_QEMU_VIRT imply CONFIG_CMD_SBI.

The sbi command provides detailed information about the SBI.
It is useful to test the discovery of extensions.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2022-04-06 09:40:05 +08:00
Tom Rini
59bffec43a Merge branch '2022-04-04-platform-updates'
- Updates for exynos78x0 and TI K3 platforms
2022-04-05 13:45:22 -04:00
Tom Rini
037ef53cf0 Xilinx changes for v2022.07-rc1 v2
xilinx:
 - Allow booting bigger kernels till 100MB
 
 zynqmp:
 - DT updates (reset IDs)
 - Remove unneeded low level uart initialization from psu_init*
 - Enable PWM features
 - Add support for 1EG device
 
 serial_zynq:
 - Change fifo behavior in DEBUG mode
 
 zynq_sdhci:
 - Fix BASECLK setting calculation
 
 clk_zynqmp:
 - Add support for showing video clock
 
 gpio:
 - Update slg driver to handle DT flags
 
 net:
 - Update ethernet_id code to support also DM_ETH_PHY
 - Add support for DM_ETH_PHY in gem driver
 - Enable dynamic mode for SGMII config in gem driver
 
 pwm:
 - Add driver for cadence PWM
 
 versal:
 - Add support for reserved memory
 
 firmware:
 - Handle PD enabling for SPL
 - Add support for IOUSLCR SGMII configurations
 
 include:
 - Sync phy.h with Linux
 - Update xilinx power domain dt binding headers
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCYkxUZwAKCRDKSWXLKUoM
 IXJ2AKCQcoFK7wanCCvZfuEJCSwO5E4eCACginE2CFVXKcY1P8ta4ESusjY2TH0=
 =HOoS
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2022.07-rc1-v2' of https://source.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx changes for v2022.07-rc1 v2

xilinx:
- Allow booting bigger kernels till 100MB

zynqmp:
- DT updates (reset IDs)
- Remove unneeded low level uart initialization from psu_init*
- Enable PWM features
- Add support for 1EG device

serial_zynq:
- Change fifo behavior in DEBUG mode

zynq_sdhci:
- Fix BASECLK setting calculation

clk_zynqmp:
- Add support for showing video clock

gpio:
- Update slg driver to handle DT flags

net:
- Update ethernet_id code to support also DM_ETH_PHY
- Add support for DM_ETH_PHY in gem driver
- Enable dynamic mode for SGMII config in gem driver

pwm:
- Add driver for cadence PWM

versal:
- Add support for reserved memory

firmware:
- Handle PD enabling for SPL
- Add support for IOUSLCR SGMII configurations

include:
- Sync phy.h with Linux
- Update xilinx power domain dt binding headers
2022-04-05 11:27:39 -04:00
Michal Simek
ad8d48e981 arm64: zynqmp: Record ID code for XCZU1EG device
Add ID code for 1eg device.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/5b6c9f6a25bba076f304bc4699f6f676a929a683.1648619516.git.michal.simek@xilinx.com
2022-04-05 15:11:35 +02:00
Tom Rini
4de720e98d Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sunxi
A big part is the DM pinctrl driver, which allows us to get rid of quite
some custom pinmux code and make the whole port much more robust. Many
thanks to Samuel for that nice contribution! There are some more or less
cosmetic warnings about missing clocks right now, I will send the trivial
fixes for that later.
Another big chunk is the mkimage upgrade, which adds RISC-V and TOC0
(secure images) support. Both features are unused at the moment, but I
have an always-secure board that will use that once the DT lands in the
kernel.
On top of those big things we have some smaller fixes, improving the
I2C DM support, fixing some H6/H616 early clock setup and improving the
eMMC boot partition support.

The gitlab CI completed successfully, including the build test for all
161 sunxi boards. I also boot tested on a A64, A20, H3, H6, and F1C100
board. USB, SD card, eMMC, and Ethernet all work there (where applicable).
2022-04-05 08:33:32 -04:00
Dave Gerlach
7ffcff277d board: ti: am64x: Account for DDR size fixups if ECC is enabled
Call into k3-ddrss driver to fixup device tree and resize the available
amount of DDR if ECC is enabled.

A second fixup is required from A53 SPL to take the fixup as done from
R5 SPL and apply it to DT passed to A53 U-boot, which in turn passes
this to the OS.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2022-04-04 19:02:04 -04:00
Dave Gerlach
dffdb1f8eb board: ti: am64x: Use fdt functions for ram and bank init
Use the appropriate fdtdec_setup_mem_size_base and
fdtdec_setup_bank_size calls in dram_init and dram_bank_init to pull
these values from DT, where they are already available, instead of
hardcoding them.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2022-04-04 19:02:04 -04:00
Samuel Holland
a0ca51f70b sunxi: Support building a SPL as a TOC0 image
Now that mkimage can generate TOC0 images, and the SPL can interpret
them, hook up the build infrastructure so the user can choose which
image type to build. Since the absolute load address is stored in the
TOC0 header, that information must be passed to mkimage.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-04-04 23:24:17 +01:00
Samuel Holland
8c2bdff483 sunxi: Remove non-DM MMC pin setup
This is now handled automatically by the pinctrl driver.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-04-04 23:24:17 +01:00
Samuel Holland
aadf3d5383 sunxi: Remove options and setup code for I2C2-I2C4
These options are not currently enabled anywhere. Any new users should
use DM clocks and pinctrl.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-04-04 23:24:16 +01:00
Samuel Holland
3e42d919af sunxi: Remove non-DM GMAC pin setup
This is now handled automatically by the pinctrl driver.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-04-04 23:24:16 +01:00
Tom Rini
01f1ab67f3 Merge branch 'next'
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-04 10:48:44 -04:00
Tom Rini
8221c52d88 First set of u-boot-at91 features for the 2022.07 cycle
-----BEGIN PGP SIGNATURE-----
 
 iQFQBAABCgA6FiEEqxhEmNJ6d7ZdeFLIHrMeAg6sL8gFAmJH28ocHGV1Z2VuLmhy
 aXN0ZXZAbWljcm9jaGlwLmNvbQAKCRAesx4CDqwvyDv4B/9FBx95f7zR6WmguG05
 VyBchjphsRSuXHb7NieVNNEIpCJu+zw8YutngN2Q8KWIbM9o1OZnrNGxuKR9s+Px
 ivMXytGGsIa74XXhxv2boX151R1a5TG4UPf4Vn20qxmUiScE4FaoW5wQHG2vGqxd
 /LbzENNCA1A41/RGGysqyY8nQgOEY+Iass+OaHe7XjngcCfY5oY4IRqJ/Ak7ojkv
 Vm46i+KCTuyBlcMDjAwDsukSmzsujz2FyzZU1Uy62N8quEdXgrlIA/Yh4oarZ+BO
 5W/BJe1rClbnBkMJJn71GUlmnYrioYeUvxvIYwZWooe0Hgr+Iv1vOXv8aJ4hBsdc
 yoje
 =SwGu
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-at91-2022.07-a' of https://source.denx.de/u-boot/custodians/u-boot-at91 into next

First set of u-boot-at91 features for the 2022.07 cycle:

This feature set includes the new driver for the Atmel TCB timer,
alignment in DT for sama7g5 and sama7g5ek board, one Kconfig conversion
for external reset, and the usage of Galois tables from ROM for sama5d2
device.
2022-04-04 08:26:55 -04:00
Sean Anderson
53b953f2eb arm64: ls1046a: Support semihosting fallback
Use the semihosting_enabled function to determine whether or not to
enable semihosting devices. This allows for graceful fallback in the
event a debugger is not attached.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
2022-04-01 16:56:54 -04:00
Sean Anderson
93c3d32970 ls1046ardb: Add support for JTAG boot
This adds support for booting entirely from JTAG while using a
hard-coded RCW. With these steps, it is not necessary to program a
"good" RCW using CodeWarrior. The method here can be performed with any
JTAG adapter supported by OpenOCD, including the on-board CMSIS-DAP
(albeit very slowly).

These steps require LS1046A support in OpenOCD, which was added in [1].

[1] 5b70c1f679/

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
[trini: Add reference to doc/board/nxp/ls1046ardb.rst]
2022-04-01 16:56:44 -04:00
Sean Anderson
71230cdaa9 nxp: ls1046ardb: Convert README to rST
This converts the readme for this board to rST. I have tried not to
change any semantics from the original (though I did convert MB to M).

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
2022-04-01 15:03:13 -04:00
Peter Hoyes
8d78a6b674 vexpress64: Add ARMv8R-64 board variant
The ARMv8-R64 architecture introduces optional VMSA (paging based MMU)
support in the EL1/0 translation regime, which makes that part mostly
compatible to ARMv8-A.

Add a new board variant to describe the "BASE-R64" FVP model, which
inherits a lot from the existing v8-A FVP support. One major difference
is that the memory map in "inverted": DRAM starts at 0x0, MMIO is at
2GB [1].

 * Create new TARGET_VEXPRESS64_BASER_FVP target, sharing most of the
   exising configuration.
 * Implement inverted memory map in vexpress_aemv8.h
 * Create vexpress_aemv8r defconfig
 * Provide an MMU memory map for the BASER_FVP
 * Update vexpress64 documentation

At the moment the boot-wrapper is the only supported secure firmware. As
there is no official DT for the board yet, we rely on it being supplied
by the boot-wrapper into U-Boot, so use OF_HAS_PRIOR_STAGE, and go with
a dummy DT for now.

[1] https://developer.arm.com/documentation/100964/1114/Base-Platform/Base---memory/BaseR-Platform-memory-map

Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
[Andre: rebase and add Linux kernel header]
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
[trini: Add MAINTAINERS entry for Peter]
2022-04-01 15:03:03 -04:00
Andre Przywara
1a1143a454 vexpress64: pick DRAM size from DT
So far the DRAM size for both the Juno and the FVP model were hardcoded
in our config header file. For the Juno this is fine, as all models have
8 GiB of DRAM, but the DRAM size can be configured on the model command
line.

Drop the fixed DRAM size setup, instead look up the size in the device
tree, that we now have for every board. This allows a user to inject
a DT with the proper size, and be able to use the full amount of DRAM.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-04-01 14:59:15 -04:00
Andre Przywara
30cacb8123 vexpress64: generalise page table generation
In preparation for the ARMv8-R64 FVP support, which has DRAM mapped at
0x0, generalise the page table generation, by using symbolic names for
the address ranges instead of fixed numbers.

We already define the base of the DRAM and MMIO regions, so just use
those symbols in the page table description. Rename V2M_BASE to the more
speaking V2M_DRAM_BASE on the way.

On the VExpress memory map, the address space right after 4GB is of no
particular interest to software, as the whole of DRAM is mapped at 32GB
instead. The first 2 GB alias to the lower 2GB of DRAM mapped below 4GB,
so we skip this part and map some more of the high DRAM, should anyone
need it.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-04-01 14:59:15 -04:00
Andre Przywara
5865038257 vexpress64: move hardware setting from defconfig to Kconfig
The defconfigs for the Arm Juno board and the FVP model are quite large,
setting a lot of platform-fixed variables like SYS_TEXT_BASE.
As those values are not really a user choice, let's provide default
values for them in our Kconfig file, so a lot of cruft can be removed
from the defconfig files.
This also moves the driver selection out of there, since this is again
not something a user should really decide on. Instead we allow users to
enable or disable subsystems, and select the appropriate drivers based
on that in the Kconfig file.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-04-01 14:57:46 -04:00
Andre Przywara
c0fce92956 vexpress64: fvp: enable OF_CONTROL
The FVP base model is relying on a DT for Linux operation, so there is
no reason we would need to rely on hardcoded information for U-Boot.
Letting U-Boot use a DT will open up the usage of actual peripherals,
beyond the support for semihosting only.

Enable OF_CONTROL in the Kconfig, and use the latest dts files from
Linux. Depending on whether we use the boot-wrapper or TF-A, there is
already a DTB provided or not, respectively.

To cover the boot-wrapper, we add an arm64 Linux kernel header, which
allows the boot-wrapper to treat U-Boot like a Linux kernel. U-Boot will
find the pointer to the DTB in x0, and will use it.

Even though TF-A carries a DT, at the moment this is not made available
to non-secure world, so to not break users, we use the U-Boot provided
DTB copy in that case. For some reason TF-A puts some DT like structure
at the address x0 is pointing at, but that is very small and doesn't
carry any hardware information. Make the code to ignore those small DTBs.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-04-01 14:55:38 -04:00
Andre Przywara
fac7fc43cf vexpress64: Kconfig: move board definitions out of arch/arm
At the moment we define three "VExpress64" boards in arch/arm/Kconfig,
plus have a second Kconfig file in board/armltd/Kconfig.
One of those three boards is actually bogus (TARGET_VEXPRESS64_AEMV8A),
that stanza looks like being forgotten in a previous cleanup.

To remove the clutter from the generic Kconfig file, just define some
ARCH_VEXPRESS64 symbol there, enable some common options, and do the
board/model specific configuration in the board/armltd Kconfig file.

That allows to streamline and fine tune the configuration later, and
to also pull a lot of "non user choices" out of the defconfigs.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-04-01 14:55:38 -04:00
Tom Rini
d4a2c400d1 Convert CONFIG_NORFLASH_PS32BIT to Kconfig
This converts the following to Kconfig:
   CONFIG_NORFLASH_PS32BIT

Note that we also attempt to correct the behavior of the code here,
which had been testing for "NORFLASH_PS32BIT" which would never be set,
instead check for the now set "CONFIG_NORFLASH_PS32BIT", which results
in some behavior change.

Cc: TsiChung Liew <Tsi-Chung.Liew@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:47 -04:00
Tom Rini
7505588342 Convert CONFIG_SRIO_PCIE_BOOT_SLAVE to Kconfig
This converts the following to Kconfig:
   CONFIG_SRIO_PCIE_BOOT_SLAVE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:47 -04:00
Tom Rini
f13d7e21fc mx53loco: Convert CONFIG_DIALOG_POWER to Kconfig
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:47 -04:00
Tom Rini
28f9c3125d Convert CONFIG_DEEP_SLEEP to Kconfig
This converts the following to Kconfig:
   CONFIG_DEEP_SLEEP

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:47 -04:00
Tom Rini
d7b7e3e906 Convert CONFIG_SYS_USE_NORFLASH et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_USE_NORFLASH
   CONFIG_SYS_USE_BOOT_NORFLASH

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:46 -04:00
Tom Rini
ef26b53a11 MPC837XERDB: Move CONFIG_PCIE to Kconfig
Move this symbol to the board Kconfig file.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:46 -04:00
Tom Rini
e9ce70eff0 Convert CONFIG_LSCHLV2 to Kconfig et al
This converts the following to Kconfig:
   CONFIG_LSCHLV2
   CONFIG_LSXHL

Cc: Michael Walle <michael@walle.cc>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Michael Walle <michael@walle.cc>
2022-04-01 10:28:46 -04:00
Tom Rini
11f077bb20 mpc8548cds: Rework CONFIG_LEGACY usage
This CONFIG option is used in one place, so pick a more direct name and
migrate to Kconfig.  Rework the code slightly.

Cc: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:46 -04:00
Tom Rini
7f3092d713 Convert CONFIG_KM_COGE5UN et al to Kconfig
This converts the following to Kconfig:
   CONFIG_KM_COGE5UN
   CONFIG_KM_KIRKWOOD_128M16
   CONFIG_KM_KIRKWOOD
   CONFIG_KM_KIRKWOOD_PCI
   CONFIG_KM_NUSA
   CONFIG_KM_SUSE2

Cc: Holger Brunck <holger.brunck@hitachienergy.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Holger Brunck <holger.brunck@hitachienergy.com>
2022-04-01 10:28:46 -04:00
Tom Rini
0ebaa72e56 kmtegr1: Drop CONFIG_KMTEGR1
The only usage of CONFIG_KMTEGR1 can be replaced by
CONFIG_TARGET_KMTEGR1 so do so and remove this other symbol.

Cc: Holger Brunck <holger.brunck@hitachienergy.com>
Cc: Heiko Schocher <hs@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Holger Brunck <holger.brunck@hitachienergy.com>
2022-04-01 10:28:46 -04:00
Tom Rini
26e5944ec9 stmark2: Migrate CONFIG_SYS_EXTRA_OPTIONS to Kconfig
This platform is the only one to set these options, so define them in
the board Kconfig file.

Cc: Angelo Dureghello <angelo@sysam.it>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:46 -04:00
Tom Rini
47267f8261 Remove CONFIG_BOARDNAME and CONFIG_BOARD_NAME
Both of these variables are used in a few hard-coded ways to set some
string values or print something to the user.  In almost all cases, it's
just as useful to hard-code the value used.  The exception here is
printing something closer to correct board name for p1_p2_rdb machines.
This can be done using something from the device tree, but for now
hard-code a non-CONFIG based value instead.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:46 -04:00
Mihai Sain
d05fc47bbc board: at91: sama5d2: set blue led on at boot time
Set blue led on at boot time in order to highlight that u-boot is loaded.
This is done for all sama5d2 based boards which contain an RGB led.

Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
2022-04-01 15:42:46 +03:00
Sughosh Ganu
64437a05d2 qemu: arm: Remove platform specific function to get RNG device
The QEMU platform has a function defined to get the random number
generator(RNG) device. However, the RNG device can be obtained simply
by searching for a device belonging to the RNG uclass. Remove the
superfluous platform function defined for the QEMU platform for
getting the RNG device.

Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-03-31 19:06:16 +02:00
Tim Harvey
52ae8d6cc8 board: gateworks: venice: determine dram size at runtime
The SPL does not update the memory node with the dram size from EEPROM
but instead we can use get_ram_size which does a simple memory test
to determine the available RAM. Update PHYS_SDRAM_SIZE to 4GiB as that
is the max used on the Venice boards.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-03-31 08:27:52 -04:00
Tim Harvey
051df08fe0 board: gw_ventana: gsc: fix GSC read/write functions
commit 7c84319af9c7 ("dm: gpio: Correct use of -ENODEV in drivers")
changed the return code for an I2C NAK from -ENODEV to -EREMOTEIO.

Update the gsc_i2c_read and gsc_i2c_write functions for this change
to properly retry the transaction on a NAK meaning the GSC is busy.

Fixes: 7c84319af9 ("dm: gpio: Correct use of -ENODEV in drivers")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-03-31 08:27:51 -04:00
Michal Simek
0302a207c3 arm64: zynqmp: Remove low level UART setting cont
There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.
The same change was done in past by commit 84d2bbf082 ("arm64: zynqmp:
Remove low level UART setting").

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/91a73f292bafc4b64ed09954cc23780496da4b65.1648125082.git.michal.simek@xilinx.com
2022-03-29 09:18:31 +02:00
Michal Simek
f66d0b5346 arm64: versal: Do not place u-boot to reserved memory location
Versal can also have reserved space in DT which u-boot has to avoid to
placing self to that location. The same change was done in ZynqMP by commit
ce39ee28ec ("zynqmp: Do not place u-boot to reserved memory location")
and also for microblaze by commit d7b5cc89d3 ("microblaze: Do not place
u-boot to reserved memory location").

The patch was tested by adding reserved-memory node to DT and check via
bdinfo back.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/15426fa6d64835dd23c5c8c12bbfc97306fb6098.1647527129.git.michal.simek@xilinx.com
2022-03-29 09:16:30 +02:00
Simon Glass
92e3fb8b5e video: Drop FSL DIU driver
This does not use driver model and is more than two years past the
migration date. Drop it.

It can be added back later if needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-28 20:18:16 +02:00
Simon Glass
77f46f0607 video: fsl: colibri_vf: Drop FSL DCU driver
This does not use driver model and is more than two years past the
migration date. Drop it.

It can be added back later if needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-28 20:18:07 +02:00
Simon Glass
1fa43cad86 video: Drop references to CONFIG_VIDEO et al
Drop the Kconfigs which are not used and all references to them. In
particular, this drops CONFIG_VIDEO to avoid confusion and allow us to
eventually rename CONFIG_DM_VIDEO to CONFIG_VIDEO.

Also drop the prototype for video_get_info_str() which is no-longer used.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Jason Liu <jason.hui.liu@nxp.com>
2022-03-28 20:17:07 +02:00
Simon Glass
fff49e01d8 video: Drop video_fb header
This is not used now. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-28 20:16:46 +02:00
Simon Glass
d77c6fbd3f video: siemens: Drop unused video code
Drop this old code which is not built anymore, as it depends on
CONFIG_VIDEO which has been removed.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-28 20:16:19 +02:00
Tom Rini
34d2b7f203 Prepare v2022.04-rc5
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAmJBxXQACgkQFHw5/5Y0
 tywKKAv+L+sCmqfJ4Zy2cdzWkGZI3NZMWi8yzUUU37RH5I+3Blht+z6dMslm9gCB
 7/PwS5y7WH3l3wEdeXcw4FUCgNh3D8YyfCcVCsQ0Qxig49xwWz8Jn6t+haOWD6eW
 uXim+gSG+ceWTBrKf3InzXN5fHPIcF66r+k3opwAwIYKpT8p8CgM4ewshBCAsc6t
 6qSLf+A64JNv/y2DTS+sPDY68tnplbyRvrNb6YEazOF6b6SnSE2j+EH8RkIZ+2yT
 cTUhQ2o9JJIKnaG9MTqHB+XVe80oPB7bTWInFo2JxGn98XeS7CTCcnDZhLqWrvHF
 gBfcpEcVE2blVbg/Vo2x4rnU1dop44ch6pE9k5SPFJcPdlzdwFHHgGyfGi9LtD4K
 JAvaIQdz6ZEOQqShpCxcbL/g2/uoRaXFqC7E8IE+WdFMXGBQoZpqaoBMoefnyplk
 xrzqaQye38JgZDX0ku4cm4SMArAfr4sVHcdDlSlzY3y2KQ8Ead25irRvq7GoQ2Ad
 Odo9taQF
 =9g2Y
 -----END PGP SIGNATURE-----

Merge tag 'v2022.04-rc5' into next

Prepare v2022.04-rc5
2022-03-28 12:36:49 -04:00
Andre Przywara
e943753dc2 sunxi: Fix old GMAC pinmux setup
Commit 5bc4cd05d7 ("sunxi: move non-essential code out of s_init()")
moved the call to eth_init_board() from s_init() into board_init_f().
This means it's now only called from the SPL, which makes sense for
most of the other moved low-level functions. However the GMAC pinmux and
clock setup in eth_init_board() was not happy about that, so it broke
the sun7i GMAC.

Since Ethernet is of no use in the SPL anyway, just move the call into
board_init(), which is only run in U-Boot proper.

This fixes Ethernet operation for the A20 SoCs, which broke in
v2022.04-rc1, with the above mentioned commit.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Tested-by: Petr Štetiar <ynezz@true.cz> [a20-olinuxino-lime2]
2022-03-26 00:16:06 +00:00
Pali Rohár
d7b904092d pci: Add defines for normal and subtractive PCI bridges
Add following two new PCI class codes defines into pci_ids.h include file:

  PCI_CLASS_BRIDGE_PCI_NORMAL
  PCI_CLASS_BRIDGE_PCI_SUBTRACTIVE

And use these defines in all U-Boot code for describing PCI class codes for
normal and subtractive PCI bridges.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-03-25 13:35:50 -04:00
Tom Rini
3e2ea3278e Convert CONFIG_LCD_INFO et al to Kconfig
This converts the following to Kconfig:
   CONFIG_LCD_INFO
   CONFIG_LCD_LOGO
   CONFIG_LCD_INFO_BELOW_LOGO
   CONFIG_LCD_IN_PSRAM

Cc: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25 12:01:15 +00:00
Tom Rini
286c4531ad Convert CONFIG_ATMEL_LCD et al to Kconfig
This converts the following to Kconfig:
   CONFIG_ATMEL_LCD
   CONFIG_ATMEL_LCD_BGR555
   CONFIG_ATMEL_LCD_RGB565
   CONFIG_GURNARD_SPLASH

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25 12:01:15 +00:00
Tom Rini
210a4b46bd Convert CONFIG_AT91_LED to Kconfig
This converts the following to Kconfig:
   CONFIG_AT91_LED

Cc: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25 12:01:15 +00:00
Tom Rini
b601906ed5 atmel: Remove CONFIG_AT91SAM9G45_LCD_BASE
This variable is used once and is noted as board-specific.  Use the
value directly with a comment.

Cc: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18 12:48:17 -04:00
Tom Rini
137b990bf5 atmel: Remove CONFIG_AT91SAM9G45EKES
This symbol is used only once, and in comparison with an unset symbol,
so drop it.

Cc: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18 12:48:17 -04:00
Tom Rini
de0bb2ba54 Convert CONFIG_AT91SAM9G10EK et al to Kconfig
This converts the following to Kconfig:
   CONFIG_AT91SAM9G10EK
   CONFIG_AT91SAM9261EK
   CONFIG_AT91SAM9G10

Cc: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18 12:48:17 -04:00
Tom Rini
23cf6344c0 Convert CONFIG_AT91SAM9G20EK et al to Kconfig
This converts the following to Kconfig:
   CONFIG_AT91SAM9G20EK
   CONFIG_AT91SAM9260EK
   CONFIG_AT91SAM9G20EK_2MMC

Cc: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18 12:48:17 -04:00
Tom Rini
79b6eab0bd imx: Convert some boards to DM_ETH
A small number of i.MX6/7 and vf610 boards have not enabled DM_ETH yet.
Given the state of the rest of the platform, enable DM_ETH.

Cc: Alison Wang <alison.wang@nxp.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Richard Hu <richard.hu@technexion.com>
Cc: Troy Kisky <troy.kisky@boundarydevices.com>
Cc: Uri Mashiach <uri.mashiach@compulab.co.il>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18 12:48:17 -04:00
Marty E. Plummer
6d36e92d28 rockchip: rk3399: Add support for chromebook_kevin
Add support for Kevin, an RK3399-based convertible chromebook that is
very similar to Bob. This patch is mostly based on existing support for
Bob, with only minor changes for Kevin-specific things.

Unlike other Gru boards, coreboot sets Kevin's center logic to 925 mV,
so adjust it here in the dts as well. The rk3399-gru-kevin devicetree
has an unknown event code reference which has to be defined, set it
to the Linux counterpart. The new defconfig is copied from Bob with the
diffconfig:

     DEFAULT_DEVICE_TREE "rk3399-gru-bob" -> "rk3399-gru-kevin"
     DEFAULT_FDT_FILE "rockchip/rk3399-gru-bob.dtb" -> "rockchip/rk3399-gru-kevin.dtb"
     VIDEO_ROCKCHIP_MAX_XRES 1280 -> 2400
     VIDEO_ROCKCHIP_MAX_YRES 800 -> 1600
    +TARGET_CHROMEBOOK_KEVIN y

With this Kevin can boot from SPI flash to a usable U-Boot prompt on the
display with the keyboard working, but cannot boot into Linux for
unknown reasons.

eMMC starts in a working state but fails to re-init, microSD card works
but at a lower-than-expected speed, USB works but causes a hang on
de-init. There are known workarounds to solve eMMC and USB issues.

Cc: Marty E. Plummer <hanetzer@startmail.com>
Cc: Simon Glass <sjg@chromium.org>
[Alper: commit message, resync config with Bob, update MAINTAINERS,
        add to Rockchip doc, add Kconfig help message, set regulator]
Co-developed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2022-03-18 18:12:03 +08:00
Alper Nebi Yasak
eb0ca6b5ec rockchip: gru: Set up SoC IO domain registers
The RK3399 SoC needs to know the voltage value provided by some
regulators, which is done by setting relevant register bits. Configure
these the way other RK3399 boards do, but with the same values as are
set in the equivalent code in coreboot.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2022-03-18 18:12:03 +08:00
Tom Rini
297e6eb8dc Xilinx changes for v2022.07-rc1
microblaze:
 - Add support for reserved memory
 
 xilinx:
 - Update FRU code with MAC reading
 
 zynqmp:
 - Remove double AMS setting
 - DT updates (mostly for SOMs)
 - Add support for zcu106 rev 1.0
 
 zynq:
 - Update nand binding
 
 nand:
 - Aligned zynq_nand to upstream DT binding
 
 net:
 - Add support for ethernet-phy-id
 
 mmc:
 - Workaround CD in zynq_sdhci driver also for ZynqMP
 - Add support for dynamic/run-time SD config for SOMs
 
 gpio:
 - Add driver for slg7xl45106
 
 firmware:
 - Add support for dynamic SD config
 
 power-domain:
 - Update zynqmp driver with the latest firmware
 
 video:
 - Add skeleton driver for DP and DPDMA
 
 i2c:
 - Fix i2c to work with QEMU
 
 pinctrl:
 - Add driver for zynqmp pinctrl driver
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCYjIBkgAKCRDKSWXLKUoM
 IYUwAKCYRBxb59BFq4MRvTbNcRZ7H4oGIQCfVUl3x9KZ7nFZaYAaBXFBxwna+PE=
 =irCR
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2022.07-rc1' of https://source.denx.de/u-boot/custodians/u-boot-microblaze into next

Xilinx changes for v2022.07-rc1

microblaze:
- Add support for reserved memory

xilinx:
- Update FRU code with MAC reading

zynqmp:
- Remove double AMS setting
- DT updates (mostly for SOMs)
- Add support for zcu106 rev 1.0

zynq:
- Update nand binding

nand:
- Aligned zynq_nand to upstream DT binding

net:
- Add support for ethernet-phy-id

mmc:
- Workaround CD in zynq_sdhci driver also for ZynqMP
- Add support for dynamic/run-time SD config for SOMs

gpio:
- Add driver for slg7xl45106

firmware:
- Add support for dynamic SD config

power-domain:
- Update zynqmp driver with the latest firmware

video:
- Add skeleton driver for DP and DPDMA

i2c:
- Fix i2c to work with QEMU

pinctrl:
- Add driver for zynqmp pinctrl driver
2022-03-16 12:52:02 -04:00
Tom Rini
469c1bc688 Merge https://source.denx.de/u-boot/custodians/u-boot-riscv
- k210 updates
2022-03-16 08:11:53 -04:00
Tom Rini
ababaa4a27 mtd: add NAND write protect support to stm32_fmc2_nand
stm32mp1 bsec: Add permanent lock write support
 stm32mp1 bsec: Add dev in function description
 cmd_stboard: Update test on misc_read() result
 video: fix the check of return value of clk_set_rate in stm32_ltdc
 DT: Alignment with kernel v5.17 for stm32mp15
 DT: Add USB OTG pinctrl and regulator in SPL for DHCOR
 DT: Move vdd_io extras into Avenger96 extras
 DT: Add DFU support for DHCOM recovery
 ram: stm32mp1: Unconditionally enable ASR
 psci: Implement PSCI system suspend and DRAM SSR for stm32mp
 -----BEGIN PGP SIGNATURE-----
 
 iQJQBAABCgA6FiEEXyrViUccKBz9c35Jysd4L3sz/6YFAmIwUdYcHHBhdHJpY2Uu
 Y2hvdGFyZEBmb3NzLnN0LmNvbQAKCRDKx3gvezP/pj/FEAClzm1xFrw0oxsIGf9J
 Ukyd66yIWiC2rjrxnOh7dtE3toHVVr9+GtM3RohS913BFoVTzlwUlfK75LBrxwWg
 Qyp6P8BUWIf8P3Q/x+VcLXuHr/Q+o7prROxclumTEnhzcDhlp/Q6zwXcqXIH77cn
 uOxjK5BE1Mt1KI8Fz94EqntoOars5UvxPpye7pahAlGzdZ1PDB1YR8dE5ZjCRG3Q
 jNx6I0EZBfjQTHBEtLUSIUGykCDWGJwfbPEgZPa1ePdkgOvDrKQDd0ES89lhjU95
 SQG9GFChug+rvXh9i4dxPBK1TGsvCjlZCbrmDGZGLnCfwkHsIzv+ajTpyBzXH5xA
 t3XWK0vIaCOpAs1CcRrLjVUA6Paz8qkbTyoGGezvWtRwZ7wV35nI0n/g+R9NM1jC
 GR5rrH6yIqrhj6TCneckkIVuiGRRVAXrr43a0BazzzBLSw8N9R8QB8BiM+p4hr8C
 anakyfZSN2Y8dBp4EAfzyCV2hOPaUNdaUyzcUIxxDu8eQAqZR0nzjXY6vuV8g702
 jr8Q/J2nc520INo6nwHKyOTD4+xAOK81cjQ0LTswTkx67afPmtAXH9EjZLeQ/u9P
 ReKCnf/krS/0BhN2WoYXuAl7YQmXyLilrcsA9pXg2fc6lLNw48ZKz0eDZzX549kM
 mP8xVQ+qQAiCcIxd+ijwuSSmTA==
 =H4+P
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20220315' of https://source.denx.de/u-boot/custodians/u-boot-stm

mtd: add NAND write protect support to stm32_fmc2_nand
stm32mp1 bsec: Add permanent lock write support
stm32mp1 bsec: Add dev in function description
cmd_stboard: Update test on misc_read() result
video: fix the check of return value of clk_set_rate in stm32_ltdc
DT: Alignment with kernel v5.17 for stm32mp15
DT: Add USB OTG pinctrl and regulator in SPL for DHCOR
DT: Move vdd_io extras into Avenger96 extras
DT: Add DFU support for DHCOM recovery
ram: stm32mp1: Unconditionally enable ASR
psci: Implement PSCI system suspend and DRAM SSR for stm32mp
2022-03-15 08:42:36 -04:00
Damien Le Moal
fd426b3106 k210: use the board vendor name rather than the marketing name
"kendryte" is the marketing name for the K210 RISC-V SoC produced by
Canaan Inc. Rather than "kendryte,k210", use the usual "canaan,k210"
vendor,SoC compatibility string format in the device tree files and
use the SoC name for file names.
With these changes, the device tree files are more in sync with the
Linux kernel DTS and drivers, making uboot device tree usable by the
kernel.

Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2022-03-15 17:43:11 +08:00
Patrick Delaunay
6ed21f3d70 board: st: common: update test on misc_read result in command stboard
Update management of misc_read/misc_write, which now returns length of
data after the commit 8729b1ae2c ("misc: Update read() and write()
methods to return bytes xfered"): raise a error when the result is not
the expected length.

Fixes: 658fde8a36 ("board: stm32mp1: stboard: lock the OTP after programming")
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-03-15 09:10:52 +01:00
Tom Rini
f43e892f51 - fix display of the u-boot logo on Apple devices
- convert Nokia RX-51 to CONFIG_DM_VIDEO
 -----BEGIN PGP SIGNATURE-----
 
 iGwEABECACwWIQSC4hxrSoIUVfFO0kRM6ATMmsalXAUCYi+zvw4cYWd1c3RAZGVu
 eC5kZQAKCRBM6ATMmsalXIReAJ9JS06uOjNFmOBdfpsOI2jnVdWABQCbB8nvUh19
 jbftZtj+18fhFuNb1r4=
 =3vpL
 -----END PGP SIGNATURE-----

Merge tag 'video-20220314' of https://source.denx.de/u-boot/custodians/u-boot-video

 - fix display of the u-boot logo on Apple devices
 - convert Nokia RX-51 to CONFIG_DM_VIDEO
2022-03-14 18:39:26 -04:00
Tom Rini
2abf048ab7 Prepare v2022.04-rc4
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAmIvp/8ACgkQFHw5/5Y0
 tyyI6wwApR++p9BBlWEZn1B5sivCXcs9oCX3Vs8vegpiiRbs/pGsyKV6pfEHHYV5
 lhw1YNZ0accKmqBmX19tdpQ2ZzHq3+g0eGJL8xioXU3hRoZZNsDewAF8KS+aHPpk
 qMuA+xbDi08I6z2qtrIpaDd//DO2jAkFF+/TKOzSgUSxBaomQiziZaB2x28bIBH2
 zsLMP4vzZ03uCSZVSd7HMBz0qiGhioJo5Ch2eU4TTJW19CXeMTAuav6SDq+6vJGi
 cIUe31YEe742jOVmtf2RuJQ+mDjsEfT11wvRajcbOlH/Ho7E5iFxQkmOEThpvybE
 YD5d5uLLpQj42PfBpSvx4nMJcvyOmqxdizUJxCgi/q5HrhdzcO6LwLLON0T4W4zG
 Vsue+iTjOKXgLdD8g/VogL38iHxhpfY7zsFB98vvHcoLwhEXvfvhO8Dj/lwLw4Ic
 88B6uz3TqAPNqSnTWphJPCwG8STwyqlvLXwTF+eICbtQW3uuHEtnmlsXQJeFmdUa
 fGK8dUfr
 =wyE5
 -----END PGP SIGNATURE-----

Merge tag 'v2022.04-rc4' into next

Prepare v2022.04-rc4
2022-03-14 17:40:36 -04:00
Aswath Govindraju
f4466ab9cc board: ti: j721e: evm.c: Fix the probing of in Sierra SerDes0
Initialization and power on operations of links have been moved under the
link device in the Sierra SerDes driver. Also, the UCLASS of
sierra_phy_provider has been changed to UCLASS_MISC.

Therefore, fix the probing of SerDes0 instance accordingly.

Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Reviewed-by: Georgi Vlaev <g-vlaev@ti.com>
2022-03-14 12:44:51 -04:00
Simon Glass
92a3e67ee9 x86: Correct the coreboot header file in MAINTAINERS
This board has its own config header file. Correct it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2022-03-14 15:20:40 +08:00
Tom Rini
6d35c24892 Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-spi
- sunXi SPI fixups (Andre)
- bcm iproc qspi (Rayagonda)
2022-03-12 07:20:29 -05:00
weichangzheng
b9d0f00a9d arm: add initial support for the Phytium Pomelo Board
This adds platform code and the device tree for the Phytium Pomelo Board.
The initial support comprises the UART and the PCIE.

Signed-off-by: weichangzheng <nicholas_zheng@outlook.com>
2022-03-10 13:57:04 -05:00
Adam Ford
6553f154f2 ARM: am3517_evm: Remove hard-coded pin muxing
With updated device trees now supporting pinmuxing for USB,
ethernet, MMC, and other peripherals necessary to start MLO
and U-Boot, the hard-coded pinmux options can be removed since
they are now handed by DM and only muxed when the respective
peripheral needs it.

Signed-off-by: Adam Ford <aford173@gmail.com>
Tested-by: Derald D. Woods <woods.technical@gmail.com>
2022-03-10 13:57:04 -05:00
Adam Ford
735ec22375 ARM: omap3_logic: Remove hard-coded USB muxing
With recent fixes to USB pinmuxing in the device trees, there
is no need to hard-code the pinmuxing in this table.  It is
all handled in DM now.

Signed-off-by: Adam Ford <aford173@gmail.com>
2022-03-10 13:57:04 -05:00
Adam Ford
b2356be87d ARM: am3517-evm: Remove more non-DM legacy ethernet reset code
The ethernet controller is DM compliant, and the device tree
defines it.  There is no need to manually handle pulling
the ethernet out of reset.

Signed-off-by: Adam Ford <aford173@gmail.com>
Tested-by: Derald D. Woods <woods.technical@gmail.com>
2022-03-10 13:57:04 -05:00
Romain Naour
848cfe098f ARM: omap3_beagle: Power on MMC when setting up PMIC
The PMIC enables power to the MMC card by default, but depending
on the state it was left when restarted, it's possible the MMC
may be powered down.

This patch patch explicitly tells the twl4030 to power the MMC.

Based on commits [1][2].

[1] 64fd2d2614
[2] 27b6534491

Signed-off-by: Romain Naour <romain.naour@gmail.com>
2022-03-10 13:49:57 -05:00
Romain Naour
b2aac9c622 ARM: omap3_beagle: Remove non-DM initialization
With DM_MMC working for both SPL and U-Boot, this patch removes
the legacy style of initializing the MMC driver.

Based on omap3_logic: 42140dd096.

Signed-off-by: Romain Naour <romain.naour@gmail.com>
2022-03-10 13:49:57 -05:00
Simon Glass
42fdcebf85 event: Convert misc_init_f() to use events
This hook can be implmented using events, for the three boards that
actually use it.

Add the event type and event handlers. Drop CONFIG_MISC_INIT_F since we
can just use CONFIG_EVENT to control this. Since sandbox always enables
CONFIG_EVENT, we can drop the defconfig lines there too.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-10 08:28:36 -05:00
Andre Przywara
e42dad4168 sunxi: use boot source for determining environment location
Currently we only support to load the environment from raw MMC or FAT
locations on Allwinner boards. With the advent of SPI flash we probably
also want to support using the environment there, so we need to become
a bit more flexible.

Change the environment priority function to take the boot source into
account. When booted from eMMC or SD card, we use FAT or MMC, if
configured, as before.
If we are booted from SPI flash, we try to use the environment from
there, if possible. The same is true for NAND flash booting, although
this is somewhat theoretical right now (as untested).

This way we can use the same image for SD and SPI flash booting, which
allows us to simply copy a booted image from SD card to the SPI flash,
for instance.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2022-03-10 17:33:50 +05:30
Pali Rohár
d6213e206c Nokia RX-51: Convert to CONFIG_DM_VIDEO
Mechanically convert video_hw_init() function to UCLASS_VIDEO probe
callback and replace CONFIG_CFB_CONSOLE by CONFIG_DM_VIDEO.

As framebuffer base address is setup by the bootloader which loads U-Boot,
set plat->base to that fixed framebuffer address.

This change was tested in qemu n900 machine and is working fine.

What does not work is CONFIG_VIDEO_LOGO, seems to be buggy.

Signed-off-by: Pali Rohár <pali@kernel.org>
2022-03-09 21:28:53 +01:00
Neal Frager
9fb9ec5e24 arm64: zynqmp: add support for zcu106 rev1.0
This patch adds psu_init for Xilinx ZCU106 rev1.0. Xilinx ZCU106 rev1.0 has
newer x16 DDR4 memories and it is SW compatible with revA.

Signed-off-by: Neal Frager <neal.frager@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/997b3e23457e4d24ce0e197d742382aaec36c2b2.1646230318.git.michal.simek@xilinx.com
2022-03-09 12:39:33 +01:00
Philippe Reynes
b38fbddbaa board: .gitignore: replace dsdt.c by dsdt_generated.c
Since commit 5d94cbd1dc ("scripts: Makefile.lib: generate
dsdt_generated.c instead of dsdt.c"), the file generated
is named dsdt_generated.c instead of dsdt.c.
So all files .gitignore referencing dsdt.c should be
upated with dsdt_generated.c.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2022-03-08 08:42:43 -05:00
Philippe Reynes
a241ccdc44 bcm96753ref: add initial support
This add the initial support of the broadcom reference
board bcm96753ref with a bcm6753 SoC.

This board has 1 GB of RAM, 256 MB of flash (nand),
2 USB port, 1 UART, and 4 ethernet ports.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-03-07 11:36:12 -05:00
Michal Simek
d7b5cc89d3 microblaze: Do not place u-boot to reserved memory location
Microblaze can also have reserved space in DT which u-boot has to avoid to
placing self to that location. The same change was done in Zynqmp by commit
ce39ee28ec ("zynqmp: Do not place u-boot to reserved memory location").

This feature was tested with this memory description on kc705:

	memory {
		device_type = "memory";
		reg = <0x80000000 0x40000000>;
	};

	reserved-memory {
		#address-cells = <1>;
		#size-cells = <1>;
		ranges;

		alloc@b00000000 {
			reg = <0xb0000000 0x10000000>;
			no-map;
		};

		alloc@a8000000 {
			reg = <0xa8000000 0x00010000>;
			no-map;
		};
	};

And in U-Boot log you can check u-boot relocation address and reserved
locations.
U-Boot 2022.01-03974-gb1b4c2dea9b9 (Feb 25 2022 - 11:59:48 +0100)

Model: Xilinx MicroBlaze
DRAM:  1 GiB
Flash: 128 MiB
Loading Environment from nowhere... OK
In:    serial
Out:   serial
Err:   serial
Model: Xilinx MicroBlaze
Net:   AXI EMAC: 40c00000, phyaddr 7, interface gmii
eth0: ethernet@40c00000
U-BOOT for microblaze-generic

U-Boot-mONStR> bdi
...
DRAM bank   = 0x00000000
-> start    = 0x80000000
-> size     = 0x40000000
...
relocaddr   = 0xaff69000
...
lmb_dump_all:
 memory.cnt  = 0x1
 memory[0]	[0x80000000-0xbfffffff], 0x40000000 bytes flags: 0
 reserved.cnt  = 0x3
 reserved[0]	[0xa8000000-0xa800ffff], 0x00010000 bytes flags: 4
 reserved[1]	[0xafe87bb0-0xafffffff], 0x00178450 bytes flags: 0
 reserved[2]	[0xb0000000-0xbfffffff], 0x10000000 bytes flags: 4

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/ea0a8ccce723478eb518f6fdceb91d4f129efb68.1646122398.git.michal.simek@xilinx.com
2022-03-07 16:33:47 +01:00
T Karthik Reddy
2569b51e32 Revert "board: zynqmp: Fix for wrong AMS setting by ROM"
This reverts commit dfbe492ede.
Analog bus control register should be programmed in SPL only. This commit
3414712ba8 ("arm64: zynqmp: Writing correct value to ANALOG_BUS") is
programming the same. So revert this commit.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/215bc936e36f88d2e7c4422ec68cad6d40cb8f68.1645624892.git.michal.simek@xilinx.com
2022-03-07 08:49:08 +01:00
Ashok Reddy Soma
7a036b674f fru: ops: Add support to read mac addresses from multirecord
Add support to read MAC addresses from mac address multirecord.
Check if multi record is found, then jump to mac address multirecord by
comparing the record type field. If it matches mac address
multirecord(0xD2), then copy mac addresses.

Copy these read MAC address in xilinx_read_eeprom_fru so that they are
updated to eth*addr in board_late_init_xilinx().

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/18f31bc528820934854ea5fd9dc581778fc1e40c.1645624855.git.michal.simek@xilinx.com
2022-03-07 08:48:22 +01:00
Ashok Reddy Soma
ff8ee707fb xilinx: common: Optimise updating ethaddr from eeprom
In board_late_init_xilinx() eth*addr are updated from the values read from
eeprom. Ideally the MAC addresses are updated sequencially. So if any
MAC address is invalid, it means there are no further valid values.
So optimise this logic by replacing continue with break.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/efef0d07add5d5777396ea111ad75411dc402db3.1645624855.git.michal.simek@xilinx.com
2022-03-07 08:48:21 +01:00
Ashok Reddy Soma
90e8f2db60 fru: ops: Return error from checksum if data is all zero's
fru_checksum function is simply adding all the bytes and returning the
sum. If the data passed to this function is all zero's then it will
return 0, and the functions calling this api will assume that checksum
is correct. Ideally this is not good. Fix this by returning error if all
the data is 0's.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/ac0366fe55c60a818a3f9ed33d96826c817d5520.1645624855.git.michal.simek@xilinx.com
2022-03-07 08:48:21 +01:00
Ashok Reddy Soma
952b2e60de fru: ops: Clear fru table before storing data
Fill fru table with 0's before using it, to avoid junk data.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/e5f15caf9c2102316e39f300d7c9c1ecb6be8439.1645624855.git.michal.simek@xilinx.com
2022-03-07 08:48:21 +01:00
Christian Gmeiner
f7fbe547d9 arm: mach-k3: am6_init: Use CONFIG_TI_I2C_BOARD_DETECT
We only want to call do_board_detect() if CONFIG_TI_I2C_BOARD_DETECT
is set. Same as done for am64.

This makes it possible to add a custom am65 based board design to
U-Boot that does not use this board detection mechanism.

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2022-03-04 15:20:06 -05:00
Chris Packham
0a6f0297c6 ARM: mvebu: x530: clearfog: Add ODT configuration
Commit 369e532691 ("ddr: marvell: a38x: allow board specific ODT
configuration") added the odt_config member to struct
mv_ddr_topology_map ahead of the clk_enable and ck_delay members. This
means that any boards that configured either of clk_enable or ck_delay
needed to have their board topology updated. This affects the x530 and
clearfog boards. Other A38x boards don't touch any of the trailing
members of mv_ddr_topology_map so don't need updating.

Fixes: 369e532691 ("ddr: marvell: a38x: allow board specific ODT configuration")
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-03-04 08:38:05 +01:00
Tom Rini
2c58d2fccf Convert CONFIG_BIOSEMU to Kconfig
This converts the following to Kconfig:
   CONFIG_BIOSEMU

Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-03 16:51:19 -05:00
Tom Rini
705b5840cd Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq
Update and fixes for sl28, lx2, pblimage generation for some powerpc
products
2022-03-03 08:24:13 -05:00
Andre Przywara
5ff4857d35 armv8: Fix and simplify branch_if_master/branch_if_slave
The branch_if_master macro jumps to a label if the CPU is the "master"
core, which we define as having all affinity levels set to 0. To check
for this condition, we need to mask off some bits from the MPIDR
register, then compare the remaining register value against zero.

The implementation of this was slighly broken (it preserved the upper
RES0 bits), overly complicated and hard to understand, especially since
it lacked comments. The same was true for the very similar
branch_if_slave macro.

Use a much shorter assembly sequence for those checks, use the same
masking for both macros (just negate the final branch), and put some
comments on them, to make it clear what the code does.
This allows to drop the second temporary register for branch_if_master,
so we adjust all call sites as well.

Also use the opportunity to remove a misleading comment: the macro
works fine on SoCs with multiple clusters. Judging by the commit
message, the original problem with the Juno SoC stems from the fact that
the master CPU *can* be configured to be from cluster 1, so the
assumption that the master CPU has all affinity values set to 0 does not
hold there. But this is already mentioned above in a comment, so remove
the extra comment.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-03-02 13:59:29 -05:00
Linus Walleij
c2aed9cfb9 board: stemmy: Detect board variants and patch DTB
This patch scans the cmdline from the Samsung SBL (second stage
bootloader) and stores the parameters board_id=N and lcdtype=N
in order to augment the DTB for different board and LCD types.

We then add a custom ft_board_setup() callback that will inspect
the DTB and patch it using the stored LCD type. At this point
we know which product we are dealing with, so using the passed
board_id we can also print the board variant for diagnostics.

We patch the Codina, Skomer and Kyle DTBs to use the right
LCD type as passed in lcdtype from the SBL.

This also creates an infrastructure for handling any other
Samsung U8500 board variants that may need a slightly augmented
DTB.

Cc: Markuss Broks <markuss.broks@gmail.com>
Cc: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-02-28 10:33:45 -05:00
Felix Brack
551f426011 arm: pdu001: Setup pinmux for console UART as early as possible
To make sure we get a working console as soon as possible in the SPL the
UART pins require to be configured earlier. This is especially
true for the pins of UART3, since the PDU001 board uses this UART for
the console by default.

Signed-off-by: Felix Brack <fb@ltec.ch>
2022-02-28 10:33:11 -05:00
Felix Brack
286f94803e arm: pdu001: Fix early debugging UART
The changes from commit 0dba45864b ("arm: Init the debug UART")
prevent the early debug UART from being initialized correctly.
To fix this we not just configure the pin multiplexer but add setting up
early clocks.

Signed-off-by: Felix Brack <fb@ltec.ch>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-02-28 10:33:11 -05:00
Michael Walle
453d1711d2 board: sl28: disable recovery watchdog
This board has an internal watchdog which supervises the board startup.
Although, the initial state of the watchdog is configurable, it is
enabled by default. In board_late_init(), which means almost everything
worked as expected, disable the watchdog.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-28 11:59:35 +05:30
Michael Walle
d36b683a0f board: sl28: print CPLD version on bootup
Most of the time it is very useful to have the version of the board
management controller. Now that we have a driver, print it during
startup.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-28 11:59:35 +05:30
Michael Walle
fea5161322 board: sl28: fix DRAM pretty print
The current console output is:

DRAM:  4 GiB
DDR    4 GiB (DDR3, 32-bit, CL=11, ECC on)

The size is printed twice and we can save one line of console output if
we join both lines. The new output is as follows:

DRAM:  4 GiB (DDR3, 32-bit, CL=11, ECC on)

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-28 11:59:35 +05:30
Philippe Reynes
5d94cbd1dc scripts: Makefile.lib: generate dsdt_generated.c instead of dsdt.c
There is a conflict between the static file
lib/acpi/dsdt.c and the file dsdt.c generated
dynamicaly by scripts/Makefile.lib. When a
mrproper is done, the static file dsdt.c is
removed. If a build with acpi enabled is
launched after, the following error is raised:

  CC      lib/acpi/acpi_table.o
make[2]: *** No rule to make target 'lib/acpi/dsdt.asl', needed by 'lib/acpi/dsdt.c'.  Stop.
scripts/Makefile.build:394: recipe for target 'lib/acpi' failed

To avoid such error, the generated file is named
dsdt_generated.c instead of dstdt.c.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Tested-by: Heiko Thiery <heiko.thiery@gmail.com>
2022-02-25 11:21:24 -05:00
Tom Rini
24b628a8f8 Xilinx changes for v2022.04-rc3
microblaze:
 - Fix exception handler
 
 zynqmp:
 - Show information about secure images
 - DT changes (som u-boot file removal)
 - Fix zynqmp_pm_cfg_obj_convert.py
 - Fix platform boot
 
 xilinx:
 - Fix bootm_size calculation
 - Remove GPIO_EXTRA_HEADER selection
 
 power:
 - Add zynqmp power management driver
 
 scsi:
 - Add phy support to ceva driver
 
 zynq qspi:
 - Fix unaligned accesses and check baudrate setup
 - Add support for spi memory operations
 
 net:
 - Fix 64bit calculation in axi_emac
 
 video:
 - Add missing gpio dependency for seps driver
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCYhOKGwAKCRDKSWXLKUoM
 IQP/AJ9U6inecbFh6LWchwX1ByhHVB0NuQCeLExfpcscdJlVUtNBC8kaRrrdjVM=
 =nq1B
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2022.04-rc3' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx changes for v2022.04-rc3

microblaze:
- Fix exception handler

zynqmp:
- Show information about secure images
- DT changes (som u-boot file removal)
- Fix zynqmp_pm_cfg_obj_convert.py
- Fix platform boot

xilinx:
- Fix bootm_size calculation
- Remove GPIO_EXTRA_HEADER selection

power:
- Add zynqmp power management driver

scsi:
- Add phy support to ceva driver

zynq qspi:
- Fix unaligned accesses and check baudrate setup
- Add support for spi memory operations

net:
- Fix 64bit calculation in axi_emac

video:
- Add missing gpio dependency for seps driver
2022-02-21 08:32:02 -05:00
Michal Simek
11381fba99 arm64: zynqmp: Fix debug uart initialization
The commit 0dba45864b ("arm: Init the debug UART") calls
debug_uart_init() from crt0.S but it won't work because SOC is not
configured yet. That's why create board_debug_uart_init() which calls
psu_init() via new psu_uboot_init() earlier before the first access to UART
in SPL. In full U-Boot call psu_uboot_init() only when
CONFIG_ZYNQMP_PSU_INIT_ENABLED is enabled.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/878dc2daaa8685346f889989fbfb98b2e44da7fb.1645104518.git.michal.simek@xilinx.com
2022-02-21 13:20:29 +01:00
Michal Simek
05f0f269b7 ARM: zynq: Fix debug uart initialization
The commit 0dba45864b ("arm: Init the debug UART") calls
debug_uart_init() from crt0.S but it won't work because SOC is not
configured yet. That's why create board_debug_uart_init() which calls
ps7_init() earlier before the first access to UART.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/18e67e02a0c7190839a1ef3a11f3fd6babcf34cc.1645104518.git.michal.simek@xilinx.com
2022-02-21 13:20:24 +01:00
Michal Simek
83d2941fe9 arm64: zynqmp: Fix dependencies around ZYNQMP_PSU_INIT_ENABLED
ZYNQMP_PSU_INIT_ENABLED is called only when BOARD_EARLY_INIT_F is defined
that's why cover this dependency in Kconfig.
 board_early_init_f() is only part related to
CONFIG_ZYNQMP_PSU_INIT_ENABLED which is disabled now that's why disable
BOARD_EARLY_INIT_F and also build board_early_init_f() only when
CONFIG_BOARD_EARLY_INIT_F is enabled.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/d89253ec1590cd513dcd4bfbedebae618bd6d605.1645104518.git.michal.simek@xilinx.com
2022-02-21 13:20:19 +01:00
Michal Simek
f063100593 xilinx: Enable OF_BOARD for zynq and zynqmp boards
The commit 9855034397 ("fdt: Don't call board_fdt_blob_setup() without
OF_BOARD") forced to enable OF_BOARD for platforms which provide DT
externally. Zynq/ZynqMP boards are using this feature for a long time
that's why there is a need to enable it by default.

Also code expects to return error in case of error that's why also fill it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/9f11bbffe2849f4da7d72712082d579262fe8fd8.1645104518.git.michal.simek@xilinx.com
2022-02-21 13:14:02 +01:00
Tom Rini
55e9cef143 u-boot-imx-20220220
-------------------
 
 CI : https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/11037
 
 - ESDHC fixes
 - imx8mq : MNT Reform 2 board
 - imx8m: add support for Advantech RSB-3720
 - fixes for imx8mn-ddr4-evk
 - fixes gateworks boards
 - doc : fix build for imx8mn_beacon
 - fuses: compare and read functions
 - imx8mn-ddr4-evk: boot from SD and Ethernet support
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCYhIINA8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76Yd6gCaAuVWEy+ut3dubzj7vgKTjUMyrRoAn0LZU+iS
 Fbm98wh4PGayqGhMgNee
 =9KJr
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20220220' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

u-boot-imx-20220220
-------------------

CI : https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/11037

- ESDHC fixes
- imx8mq : MNT Reform 2 board
- imx8m: add support for Advantech RSB-3720
- fixes for imx8mn-ddr4-evk
- fixes gateworks boards
- doc : fix build for imx8mn_beacon
- fuses: compare and read functions
- imx8mn-ddr4-evk: boot from SD and Ethernet support
2022-02-20 12:07:20 -05:00
Marek Vasut
fea6607317 ARM: imx: imx8mn-ddr4-evk: Add ethernet support
Add support for ethernet on the imx8mn-ddr4-evk.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2022-02-19 23:32:23 +01:00
Heiko Thiery
3240d011ae kontron-pitx-imx8m: fix board_mmc_getcd()
The function wrongly will return the card detection status of the SD card
(USDHC2) for the eMMC (USDHC1). Thus booting from eMMC without an inserted
SD card will fail.

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
2022-02-19 23:32:23 +01:00
Tim Harvey
2cb156e126 board: gateworks: venice: add imx8mn-gw7902 support
The GW7902 is based on the i.MX 8M Mini / Nano SoC featuring:
 - LPDDR4 DRAM
 - eMMC FLASH
 - Gateworks System Controller
 - LTE CAT M1 modem
 - USB 2.0 HUB
 - M.2 Socket with USB2.0, PCIe, and dual-SIM
 - IMX8M FEC
 - PCIe based GbE
 - RS232/RS485/RS422 serial transceiver
 - GPS
 - CAN bus
 - WiFi / Bluetooth
 - MIPI header (DSI/CSI/GPIO/PWM/I2S)
 - PMIC

To add support for the i.MX8M Nano GW7902:
 - Add imx8mn-venice dts/defconfig/include
 - Add imx8mn-gw7902 dts
 - Add imx8mn-2gb lpddr4 dram configs
 - Add misc support for IMX8M Nano SoC
 - rename imx8mm-venice.c to venice.c as it is no longer imx8mm specific
 - update README with differences for IMX8MN vs IMX8MM

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-19 14:46:54 +01:00
Ying-Chun Liu (PaulLiu)
ddb56f371a arm: imx8m: add support for Advantech RSB-3720
Add initial support for Advantech RSB-3720 board.
The initial support includes:
 - MMC
 - eMMC
 - I2C
 - FEC
 - Serial console

Signed-off-by: Darren Huang <darren.huang@advantech.com.tw>
Signed-off-by: Kevin12.Chen <Kevin12.Chen@advantech.com.tw>
Signed-off-by: Phill.Liu <Phill.Liu@advantech.com.tw>
Signed-off-by: Tim Liang <tim.liang@advantech.com.tw>
Signed-off-by: wei.zeng <wei.zeng@advantech.com.cn>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
Cc: uboot-imx <uboot-imx@nxp.com>
Cc: Peng Fan (OSS) <peng.fan@oss.nxp.com>
2022-02-19 14:46:54 +01:00
Adam Ford
e426a3a3dc imx8mm_beacon/imx8mn_beacon: Update build instructions
With binman generating flash.bin, it's not longer necessary to
specify either the location of ATF nor is it necessary to
specify building flash.bin, so let's update the build instructions
to remove those.  While in here, update the revision of ATF and
DDR firmware so both Mini and Nano reference the same revision.

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-19 14:46:54 +01:00
Tommaso Merciai
22636ca23b freescale: imx8mm_evk: Use IS_ENABLED instead of #ifdef
Use IS_ENABLED(CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG) to make the code
more readable and fix checkpatch.pl warning

Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com>
2022-02-18 18:12:23 +01:00
Tom Rini
8ad1c9c26f Merge https://source.denx.de/u-boot/custodians/u-boot-marvell
- a37xx: pci: Cleanup and minor fix for root port check (Pali)
- pci: mvebu: Ensure that root port is always on root zero bus (Pali)
- kwbimage: Fix dumping DATA registers for v0 images (Pali)
- kwbimage: Support for parsing extended v0 format (Pali)
- a37xx: Fix code and update DTS files to upstream version (Pali)
- a37xx: Fix and extend building memory map (Pali)
- ddr: marvell: a38x: fix BYTE_HOMOGENEOUS_SPLIT_OUT decision (Marek)
- mvebu: Optionally reset board on DDR training failure (Marek)
2022-02-17 11:03:50 -05:00
Pali Rohár
bf1f1668bb arm: mvebu: turris_mox: Remove hardcoded ethernet node names
Armada 3720 DTS files in upstream kernel use ethernet nodes named
'ethernet@30000' and 'ethernet@40000'. U-Boot have them named 'neta@30000'
and 'neta@40000'. To have Turris Mox U-Boot board code independent of
ethernet node names, find ethernet node via alias.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-02-17 14:17:07 +01:00
Sinthu Raja
d8004919aa board: ti: j721e: Add support for detecting multiple device trees
Update the board_fit_config_name_match() to choose the right dtb
based on the board name read from EEPROM.

Also restrict multpile EEPROM reads by verifying if EEPROM is already
read.

Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-16 14:19:30 -05:00
Sinthu Raja
ee59fa45c8 board: ti: j721e: Disable probing of daughtercards
j721e-sk doesn't have any daughter cards, so disable daughter
card probing inside board_late_init() and spl_board_init() for
j721e-sk.

Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-16 14:19:30 -05:00
Sinthu Raja
dfb2429ff4 board: ti: j721e: Add support to update board_name for j721e-sk
Update setup_board_eeprom_env() to choose the right board name
for j721e-sk.

Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-16 14:19:30 -05:00
Sinthu Raja
a46c5289b7 board: ti: j721e: Enable support for reading EEPROM at next alternate address
J721E EVM has EEPROM populated at 0x50. J721E SK has EEPROM populated
at next address 0x51 in order to be compatible with RPi. So start
looking for TI specific EEPROM at 0x50, if not found look for EEPROM at
0x51.

Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-16 14:19:30 -05:00
Sinthu Raja
d948fc4e66 board: ti: j721e: Guard functions with right #ifdef to avoid build warnings
board_late_init(), setup_board_eeprom_env() and setup_serial() is
called only under CONFIG_BOARD_LATE_INIT, so guard these functions
with the same. Also, reorder these functions to place it under
single #ifdef

Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-16 14:19:30 -05:00
Ovidiu Panait
1669b3d1a0 microblaze: exception: migrate MICROBLAZE_V5 to Kconfig
Also, rename it to XILINX_MICROBLAZE0_DELAY_SLOT_EXCEP, since it only
covers delay slot exception support.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Link: https://lore.kernel.org/r/20220213080925.1548411-2-ovidiu.panait@windriver.com
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2022-02-15 13:11:43 +01:00
Michal Simek
fac46bc446 arm64: zynqmp: Add command for disabling loading other overlays
Add command "zynqmp pmufw node close" to disable permission to load
additional pmufw config overlays. This command will make sure that any
other sw will ask for changing permission.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/cfa5cc7909eb8deb23eb0f11c26954cbaddeb861.1642163135.git.michal.simek@xilinx.com
2022-02-15 13:04:03 +01:00
Tom Rini
c4408291bf Merge https://source.denx.de/u-boot/custodians/u-boot-riscv 2022-02-10 15:09:55 -05:00
Tony Dinh
d2a44ceddc arm: kirkwood: Pogoplug E02 : Convert Ethernet to Driver Model
The Pogoplug E02 board has the network chip Marvell 88E1116R. Convert
to Driver Model and use uclass mvgbe and the compatible driver M88E1118R
to bring up Ethernet.

- Add board_eth_init(), CONFIG_DM_ETH, and CONFIG_PHY_MARVELL
to bring up Ethernet.
- Currently, CONFIG_RESET_PHY_R symbol is used in
arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood
boards with mv8831116 PHY, with each board defines the function
reset_phy(). Undefine it for this board.
- As the result of the migration to Driver Model, this u-boot image has
grown substantially (about 100K, give or take). The old envs location
at 0x60000 (384k) is no longer possible. Move it to 0xC0000 (768K).
- Miscellaneous changes: Move constants to .c file and remove header file
board/cloudengines/pogo_e02/pogo_e02.h, use CONFIG_SYS_THUMB_BUILD to
keep u-boot image under 512K, use BIT macro, and cleanup comments.

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-02-10 07:12:16 +01:00
Tony Dinh
c153576d8d arm: kirkwood: Dockstar : Add DM Ethernet
The Dockstar board has the network chip Marvell 88E1116R. Convert to
Ethernet driver model, and use uclass mvgbe and the compatible driver
M88E1118R to bring up Ethernet.

- Add CONFIG_DM_ETH and associated configs.
- Add board_eth_init() to use uclass mvgbe to bring up the network.
And remove ad-hoc code.
- Add CONFIG_PHY_MARVELL to properly configure the network.
- Currently, CONFIG_RESET_PHY_R symbol is used in
arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood
boards with mv8831116 PHY, with each board defines the function
reset_phy(). Undefine it for this board.
- Miscellaneous changes: Move constants to .c file and remove
header file board/Seagate/dockstar/dockstar.h, use
CONFIG_SYS_THUMB_BUILD to keep u-boot image
under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments.

- Note: This patch is a RESEND for a previous patch:
https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-02-10 07:12:16 +01:00
Tony Dinh
f99a169c19 arm: kirkwood: iConnect : Add Ethernet support
- Currently, CONFIG_RESET_PHY_R symbol is used in
arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood
boards with mv8831116 PHY, with each board defines the function
reset_phy(). Undefine it for this board.
- Add board_eth_init(), CONFIG_DM_ETH, and CONFIG_PHY_MARVELL
to bring up Ethernet.
- Miscellaneous changes: Move constants to .c file and remove header file
board/iomega/iconnect/iconnect.h. Add CONFIG_HUSH_PARSER, use BIT macro,
and cleanup comments.

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-02-10 07:12:16 +01:00
Tony Dinh
fb9ed23c22 arm: kirkwood: Dreamplug : Use Marvell uclass mvgbe and PHY driver for Ethernet
The Globalscale Technologies Dreamplug board has the network chip
Marvell 88E1116R. Use uclass mvgbe and the compatible driver M88E1310
driver to bring up Ethernet.

- Currently, CONFIG_RESET_PHY_R symbol is used in
arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood
boards with mv8831116 PHY, with each board defines the function
reset_phy(). Undefine it for this board.
- Add board_eth_init() to use uclass mvgbe to bring up both network
port 0 and 1. And remove ad-hoc code.
- Enable CONFIG_PHY_MARVELL to properly configure the network.
- Add myself as maintainer (this board seems to be orphaned,
could not contact Jason Cooper using current email).
- Miscellaneous changes: Move constants to .c file and remove header file
board/Marvell/dreamplug/dreamplug.h, cleanup comments.

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Pali Rohár <pali@kernel.org>
2022-02-10 07:12:16 +01:00
Anup Patel
ef19131b80 riscv: qemu: Implement is_flash_available() for MTD NOR
Currently, if MTD NOR is enabled then U-Boot tries to issue flash
commands even when CFI flash DT node is not present. This causes
access fault on RISC-V emulators or ISS which do not emulate CFI
flash. To handle this issue, we implement is_flash_available() for
qemu-riscv board which will return 1 only if CFI flash DT node is
present.

Fixes: d248627f9d ("riscv: qemu: Enable MTD NOR flash support")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Rick Chen <rick@andestech.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2022-02-10 11:18:13 +08:00
Anup Patel
be7ce1a818 riscv: qemu: Enable HTIF console support
Enable support for HTIF console so that we can use QEMU RISC-V U-Boot
on RISC-V emulators and ISS having it.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Rick Chen <rick@andestech.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2022-02-10 11:18:12 +08:00
Simon Glass
5c86a8f7a1 imx: Don't define __ASSEMBLY__ in source files
This is supposed to be a build-system flag. Move it there so we can
define it before linux/kconfig.h is included.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-02-08 23:07:58 -05:00
Pali Rohár
f55d4978e1 Nokia RX-51: Convert to CONFIG_DM_KEYBOARD
Signed-off-by: Pali Rohár <pali@kernel.org>
2022-02-08 11:00:04 -05:00
Aswath Govindraju
b361443154 board: ti: j721e: evm.c: Add support for probing SerDes0
Add support for probing, initializing and powering, SerDes0 instance.

Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
2022-02-08 11:00:03 -05:00
David Huang
5d9fadf960 board: ti: j721s2: Add board support for J721S2
Add board support for J721S2 SoC.

Signed-off-by: David Huang <d-huang@ti.com>
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
2022-02-08 09:41:27 -05:00
Marcel Ziswiler
2bc2f817ce board: toradex: add verdin imx8m plus support
This adds initial support for the Toradex Verdin iMX8M Plus Quad 4GB WB
IT V1.0B module. They are strapped to boot from eFuses which are factory
fused to properly boot from their on-module eMMC. U-Boot supports
booting from the on-module eMMC only, SDP support is disabled for now
due to missing i.MX 8M Plus USB support.

Functionality wise the following is known to be working:
- eMMC, 8-bit and 4-bit MMC/SD card slots
- Ethernet both on-module eQoS and FEC (requires PHY on carrier board)
- GPIOs
- I2C

Boot sequence is:
SPL ---> ATF (TF-A) ---> U-boot proper

ATF, U-boot proper and u-boot.dtb images are packed into a FIT image,
loaded by SPL.

Boot:
U-Boot SPL 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100)
Quad die, dual rank failed, attempting dual die, single rank configuration.
Normal Boot
WDT:   Started watchdog@30280000 with servicing (60s timeout)
Trying to boot from BOOTROM
Find img info 0x&48025a00, size 872
Need continue download 1024
Download 779264, Total size 780424
NOTICE:  BL31: v2.2(release):rel_imx_5.4.70_2.3.2_rc1-5-g835a8f67b
NOTICE:  BL31: Built : 16:52:37, Aug 26 2021

U-Boot 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100)

CPU:   Freescale i.MX8MP[8] rev1.1 at 1200 MHz
Reset cause: POR
DRAM:  8 GiB
Core:  78 devices, 18 uclasses, devicetree: separate
WDT:   Started watchdog@30280000 with servicing (60s timeout)
MMC:   FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... OK
In:    serial
Out:   serial
Err:   serial
Model: Toradex Verdin iMX8M Plus Quad 4GB Wi-Fi / BT IT V1.0B, Serial# 06817281
Carrier: Toradex Verdin Development Board V1.1A, Serial# 10807609
Setting variant to wifi
Net:   Hard-coding pdata->enetaddr
eth1: ethernet@30be0000, eth0: ethernet@30bf0000 [PRIME]
Hit any key to stop autoboot:  0
Verdin iMX8MP #

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-07 16:33:22 +01:00
Heiko Thiery
16c7369ede board: kontron: pitx-imx8m: Add Kontron pitx-imx8m board support
The Kontron pitx-imx8m is an NXP i.MX8MQ based board in the pITX form factor.

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
2022-02-05 15:49:02 +01:00
Adam Ford
3d14bd2d20 imx: imx8mn_beacon: Remove redundant code
The function to return the default MMC device for the environment
already has a __weak instance doing exactly the same thing.  Remove
the superfluous one.

Signed-off-by: Adam Ford <aford173@gmail.com>
2022-02-05 15:49:01 +01:00
Adam Ford
586cb71e13 imx: imx8mm_beacon: Remove redundant code
The function to return the default MMC device for the environment
already has a __weak instance doing exactly the same thing.  Remove
the superfluous one.

Signed-off-by: Adam Ford <aford173@gmail.com>
2022-02-05 15:49:01 +01:00
Adam Ford
3113861beb imx: imx8mn_beacon: Enable TrustZone
When the board was added, enabling tzc380 was left off by
mistake.

Signed-off-by: Adam Ford <aford173@gmail.com>
2022-02-05 15:49:01 +01:00
Fabio Estevam
9376d799de smegw01: Update DDR initialization
Sync with the latest DDR initialization from Phytec, which
uses version 1.2 of NXP's i.MX7D DRAM Register Programming Aid
spreadsheet.

This updated DDR initialization fixes occasional system freeze.

Signed-off-by: Fabio Estevam <festevam@denx.de>
2022-02-05 15:49:01 +01:00
Andrey Zhizhikin
94588ff395 imx8mn-ddr4-evk: generate single bootable image
As suggested in commit 028abfd9b1 ("imx8mm-evk: Generate a single
bootable flash.bin again") for imx8mm_evk, it is possible to produce
single bootable image via binman. This restores the original behavior in
distros, where only one boot container is used to create target image.

Perform similar adaptions in order to provide single bootable image for
imx8mn-ddr4-evk derivate.

Update documentation to drop additional step of copying u-boot.itb

Fixes: 353dfe4b43 ("imx8mn-ddr4-evk: switch to use binman")
Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-05 15:49:01 +01:00
Lukasz Majewski
95966a563b arm: xea: config: Provide special defconfig for a single binary u-boot
The new configs/imx28_xea_sb_defconfig is introduced to facilitate
building the single binary u-boot.sb fox XEA board.

The biggest distinction from "normal" XEA imx28_xea_sb_defconfig is
support for USB mass storage devices (pen drives).

To achieve that, the CONFIG_DM_USB is enabled and supported.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2022-02-05 13:38:39 +01:00
Lukasz Majewski
8bba8954b1 arm: xea: Modify board code to generate single binary u-boot
This change provides the possibility to build XEA (imx287 based) board
U-Boot as a single binary (without support for CONFIG_SPL_FRAMEWORK).

The generated u-boot.sb can be used in the factory environment to for
example perform initial setup or HW testing.

It can be used with 'uuu' utility
(SDPS: boot -f /srv/tftp/xea/u-boot.sb)

In the configs/imx28_xea_defconfig one needs to disable following configs:
# CONFIG_SPL_BLK is not set
# CONFIG_SPL_FRAMEWORK is not set

The board_init_ll() is used in arch/arm/cpu/arm926ejs/mxs/start.S, which
is utilized when CONFIG_SPL_FRAMEWORK is disabled.

However, when it is enabled - the arch/arm/cpu/arm926ejs/start.S is used,
which requires the lowlevel_init() function.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2022-02-05 13:38:39 +01:00
Ariel D'Alessandro
c4c1ed68c1 imx8mn_var_som: Add support for Variscite VAR-SOM-MX8M-NANO board
Add support for iMX8MN VAR-SOM-MX8M-NANO board. Enables support for:

- 1GiB DDR4 RAM
- 16 GiB eMMC
- SD card
- Gigabit ethernet
- USBOTG1 peripheral - fastboot

Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-05 13:38:39 +01:00
Ying-Chun Liu (PaulLiu)
556523b955 arm: imx8m: imx8mm-cl-iot-gate: detect extension board
Extension boards can be added to Compulab's iot-gate-imx8mm.
We implement extension board manager for detecting the extension
boards.

Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
Cc: uboot-imx <uboot-imx@nxp.com>
2022-02-05 13:38:39 +01:00
Ye Li
9c7fbebe5d imx8ulp: Workaround LPOSC_TRIM fuse load issue
8ULP ROM should read the LPOSC trim BIAS fuse to fill the CGC0
LPOSCCTRL[7:0], but it writes a fixed value on A0.1 revision.

A0.2 will fix the issue in ROM. But A0.1 we have to workaround
it in SPL by setting LPOSCCTRL BIASCURRENT again.

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-02-05 13:38:39 +01:00
Ye Li
bd8b673003 imx8ulp: Fix DCNANO QoS setting
The setting does not have effect because we should set it after
power on the PS16 for NIC AV.

So move it after upower_init which has powered on all PS

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-02-05 13:38:38 +01:00
Ye Li
9dde390be6 imx8ulp_evk: Control LPI2C0 PCA6416 and TPM0 for display
The board use IO9 of PCA6416 on LPI2C0 and TPM0 for MIPI DSI MUX and
backlight. However the LPI2C0 and TPM0 are M33 resources, in this
patch we simply access them, but this is a temporary solution.
We will modify it when M33 FW changes to set MIPI DSI panel as default
path and enable backlight after reset.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-02-05 13:38:38 +01:00
Ricardo Salveti
8b71576f38 mx7ulp_com: add support for SPL
Add EA iMX7ULP COM board support for building SPL.

Signed-off-by: Ricardo Salveti <ricardo@foundries.io>
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
2022-02-05 13:38:38 +01:00
Jorge Ramirez-Ortiz
25a91f3005 arm64: zynqmp: Print the secure boot status information
Output the secure boot configuration to the console.

Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io>
Link: https://lore.kernel.org/r/20211013170447.10414-1-jorge@foundries.io
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2022-02-04 13:16:45 +01:00
Tom Rini
3aaabfe9ff Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sunxi
This is the promised second part of the sunxi PR for 2022.04, albeit
technially outside of the merge window. We were working on this full
steam since the beginning of the year, and it deserves to be merged,
I think.
The main attraction is support for the F1C100s SoC, which sports a
venerable ARM926 core. Support for this SoC and the LicheePi Nano board
has been in Linux for years, and U-Boot patches were posted mid last
year already.
The new SoC using ARMv5 also means that the bulk of the new code should
not touch any existing boards, although we did some refactorings first,
of course, which actually cleans up some existing sunxi code.

Compile tested for all 160 sunxi boards, and briefly tested on BananaPi M1,
OrangePi Zero, Pine64 and Pine-H64. Tested by others on their boards,
including F1C100s and F1C200s devices.
2022-02-03 23:24:31 -05:00
Icenowy Zheng
116e1ed1ab sunxi: board: Add support for SUNIV
Generic Timer Extension is not available on SUNIV.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-02-04 00:09:57 +00:00
Felix Brack
39f315e942 arm: pdu001: Exend the list of maintained files
Add the PDU001 board specific DT files to MAINTAINERS. This should
help for better tracking of changes to these files.

Signed-off-by: Felix Brack <fb@ltec.ch>
2022-02-03 12:15:34 -05:00
Ricardo Salveti
e6e3b9d7b5 xilinx: common: change bootm_size to not go beyond ram_top
The available ram can be limited by ram_top as that depends on the
reserved memory nodes provided by the device-tree (via
board_get_usable_ram_top), so make sure to respect ram_top when setting
up bootm_size to avoid overlapping reserved memory regions (e.g. memory
used by OP-TEE).

The same logic is available in env_get_bootm_size when bootm_size is
not defined by the default environment.

Signed-off-by: Ricardo Salveti <ricardo@foundries.io>
Link: https://lore.kernel.org/r/20220120191730.2009270-1-ricardo@foundries.io
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2022-02-01 17:11:33 +01:00
Martin Schiller
522f70463c board: ls1046ardb: force PCI device enumeration
Commit 045ecf8992 ("configs: enable DM_ETH support for LS1046ARDB")
resulted in the PCI bus no longer being implicitly enumerated.

However, this is necessary for the fdt pcie fixups to work.

Therefore, similar to commit 8b6558bd41 ("board: ls1088ardb:
transition to DM_ETH"), pci_init() is now called in the board_init()
routine when CONFIG_DM_ETH is active.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
CC: Priyanka Jain <priyanka.jain@nxp.com>
Acked-by: Camelia Groza <camelia.groza@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01 15:08:07 +05:30
Jianpeng Bu
0a96dfb57e board: ls1088a: update ifc node name to be memory-controller
IFC-NOR and QSPI are muxed on SoC.
So disable IFC node in dts if QSPI is enabled or disable QSPI node in dts
in case QSPI is not enabled.
"ifc/nor" will be changed to "memory-controller/nor" in linux. So need to
modify "ifc/nor" to "memory-controller/nor" in fdt_path_offset().

Signed-off-by: Jianpeng Bu <jianpeng.bu@nxp.com>
[Rebased]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01 15:08:07 +05:30
Martin Schiller
c702cfc7f2 board: ls1043ardb: force PCI device enumeration
Commit eb1986804d ("configs: enable DM_ETH support for LS1043ARDB")
resulted in the PCI bus no longer being implicitly enumerated.

However, this is necessary for the fdt pcie fixups to work.

Therefore, similar to commit 8b6558bd41 ("board: ls1088ardb:
transition to DM_ETH"), pci_init() is now called in the board_init()
routine when CONFIG_DM_ETH is active.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
CC: Priyanka Jain <priyanka.jain@nxp.com>
CC: Camelia Groza <camelia.groza@nxp.com>
Acked-by: Camelia Groza <camelia.groza@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01 15:08:07 +05:30
Aleksandar Gerasimovski
987b182830 km/ls102xa: use unused scratchrw4 address for post word
The SCRATCHRW4 is only used in secure boot scenario that is unsupported by
our design, so this address can be stolen for storing POST status.
The SCRATCHRW4 is initialized to zero at core rest.

Using a DDR address was unfortunate choice, the DDR at boot time has a
random contend and it happens that sometimes is matching POST magic number.
This behavior can lead to undefined POST behavior and u-boot ending in
failbootcmd command.

Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachienergy.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01 15:08:07 +05:30
Aleksandar Gerasimovski
46f81d804a configs/expu1: add u-boot update defconfig
This patch adds default defconfig for u-boot update version, the u-boot
update defconfig is a copy of the default (factory) defconfig with:
- adapted text base and environment addresses
- explicit flag that this is a field updated u-boot version

At the time of implementation this version is only used to verify the
update procedure, in future depend on the needs this defconfig can be
extended with additional options.

Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachienergy.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01 15:08:07 +05:30
Aleksandar Gerasimovski
d1af7ca8f8 km/ls102xa: fix device disable configuration
This was probably broken when mainlining, CONFIG_FSL_DEVICE_DISABLE is
not Kconfig but whitelisted.

It's fine to be without flag as this is always enabled for abec1020
(pg-wcom-ls102xa.h)

Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachienergy.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01 15:08:07 +05:30
Aleksandar Gerasimovski
f34aa3c3f2 configs/seli8: add u-boot update defconfig
This patch adds default defconfig for u-boot update version, the u-boot
update defconfig is a copy of the default (factory) defconfig with:
- adapted text base and environment addresses
- explicit flag that this is a field updated u-boot version

At the time of implementation this version is only used to verify the
update procedure, in future depend on the needs this defconfig can be
extended with additional options.

Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachienergy.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01 15:08:07 +05:30
Aleksandar Gerasimovski
84f1052800 km/ls102xa: add support for field fail-safe u-boot update
Field fail-safe u-boot update procedure for pg-wcom boards is defined and
implemented by patch: 59b3403.
This patch invokes the update procedure for pg-wcom-ls102x designs during
early misc_init_f execution.

Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachienergy.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01 15:08:07 +05:30
Aleksandar Gerasimovski
efe19295a5 km: common: implement field fail-safe u-boot update
This patch provides possibility for field fail-safe u-boot updates.
The implementation can be used on all pg-wcom boards that are booting from
parallel NOR flash.

When used in a board design, provided check_for_uboot_update function will
start new u-boot at defined location if updateduboot envvar is set to yes.
With this implementation it is expected that factory programmed u-boot
will always stay as it is, and optionally new u-boot can be safely
programmed by embedded software when the unit is rolled out on the field.

It is expected check_for_uboot_update to be called early in execution
before relocation (*_f) once SoC is basically initialized and environment
can be read, with this possibilities to not be able to fix a u-boot bug by
a u-boot update are reduced to minimum.

Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachienergy.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01 15:08:07 +05:30
Aleksandar Gerasimovski
de144d5ffe km: qrio: add access functions for ebootcount
The EBOOTCNT is a reserved persistent static memory area in QRIO,
and similar to BOOTCNT is intended to be used as boot counter location.

Comparable to BOOTCNT that is reserved for u-boot main bootcount
infrastructure, EBOOTCNT is intended to be used for pg-wcom board
specific purposes (e.g implementing early boot counter for fail-safe
u-boot update).

Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachienergy.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01 15:08:07 +05:30
Aleksandar Gerasimovski
70003e52f4 km/ls102xa: dbg phy prst depends on piggy presence
The PHY for the debug interface was placed on the board for the
pg_wcom_ls102x. Hence only when a piggy is plugged, a RJ45 jack
including magnetics is connected to the MDI of the PHY. Without a
piggy the MDI lines are left floating and it does not make sense to
have an active debug PHY.
In case of expu1 an active PHY without a piggy even led to increased
jitter for syncE.

This patch only deactivates the prst line of the debug PHY when a piggy
is detected persent.

Signed-off-by: Rainer Boschung <rainer.boschung@hitachienergy.com>
Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachienergy.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01 15:07:28 +05:30
Aleksandar Gerasimovski
639ca4b7f1 km: qrio: add function to read PGY_PRES pin status
It is necessary to read the status of the PGY_PRES pin
so that u-boot can react accordingly.

Signed-off-by: Rainer Boschung <rainer.boschung@hitachienergy.com>
Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachienergy.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01 15:04:24 +05:30
Aleksandar Gerasimovski
8af140d8fd km/ls102xa: use qrio selftest_pin for reading selftest
QRIO library now supports direct read of the test pin status.

Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachienergy.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01 15:04:24 +05:30
Aleksandar Gerasimovski
7c49bd50ed km: qrio: add function to read SLFTEST pin status
There is a request from HW designers to use this QRIO pin for detecting
DIC26_SELFTEST status instead of a GPIO pin.
This pin is typically used during production for executing POST tests and
starting test ESW bank.

Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachienergy.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01 15:04:24 +05:30
Mathew McBride
a1d2fd3874 board: traverse: add initial Ten64 support
The Ten64 is a networking-oriented MiniITX board
using the NXP LS1088A SoC.

This patch provides the bare minimum to support
Ten64 boards under U-Boot for distroboot.

Some related drivers have not yet been submitted
and this basic support lacks some of the
opinionated defaults provided by our firmware
distribution.

Signed-off-by: Mathew McBride <matt@traverse.com.au>
[Rebased]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01 15:04:24 +05:30
Mathew McBride
dc30009cd3 board: traverse: add Ten64 board controller driver
Traverse Technologies Ten64 family boards use a microcontroller
to control low level board functions like startup and reset,
as well as holding details such as the board MAC address.

Communication between the CPU and microcontroller is via
I2C.

To keep the driver structure clean between the Ten64 board
file, DM_I2C, and a future utility command, this driver
has been implemented as a misc uclass device.

Signed-off-by: Mathew McBride <matt@traverse.com.au>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01 15:04:24 +05:30
Tony Dinh
648f8d5f6b arm: kirkwood: GoFlex Home : Use Marvell uclass mvgbe and PHY driver for Ethernet
The GoFlex Home board has the network chip Marvell 88E1116R.
Use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet.

- Currently, CONFIG_RESET_PHY_R symbol is used in
arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood
boards with mv8831116 PHY, with each board defines the function
reset_phy(). Undefine it for this board.
- Add board_eth_init() to use uclass mvgbe to bring up the network.
And remove ad-hoc code.
- Enable CONFIG_PHY_MARVELL to properly configure the network.
- Miscellaneous changes: use CONFIG_SYS_THUMB_BUILD to keep u-boot image
under 512K, use BIT macro, and cleanup comments.

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-31 10:23:38 +01:00
Tony Dinh
7301ed9d68 arm: kirkwood: Pogoplug-V4 : Add board implementation files
Add board header, defconfig, and implementation files for Pogoplug V4.

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Pali Rohár <pali@kernel.org>
2022-01-31 10:23:37 +01:00
Tony Dinh
71dcfa97fa arm: kirkwood: Pogoplug-V4 : Add Kconfig files
Add Kconfig files for Pogoplug V4 board

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Pali Rohár <pali@kernel.org>
2022-01-31 10:23:37 +01:00
Pali Rohár
9ae831cedf arm: mvebu: Espressobin: Fix URLs in comments
Use versioned URLs for line numbers as branches are moving in the time and
use master branch for mv-ddr-marvell where is up-to-date code.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-31 10:23:37 +01:00
Tom Rini
e267665a74 Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sunxi
a bit delayed, the first batch of the sunxi pull request for this cycle.
This is mostly collecting some patches that were lying around for a
while, plus some recent fixes. Nothing too exciting at this point, but
of course they should be merged nevertheless.
There is the much bigger F1C100s SoC support coming up, which I hope to
be able to send in the next few days, along with the removal of sunxi's
lowlevel_init usage.

Compile tested for all 159 sunxi boards, plus briefly tested on BananaPi
M1, OrangePi Zero, Pine64 and Pine-H64.
2022-01-30 17:12:34 -05:00
Chris Morgan
52bcc4f053 sunxi: Add option to prevent booting on power plug-in
For sunxi boards with the AXP209, AXP221, AXP809, and AXP818 PMICs
(plus possibly others, I only confirmed the datasheets for these),
it is sometimes desirable to not boot whenever the device is
plugged in. An example would be when using the NTC CHIP inside a
PocketCHIP.
This provides a configurable option to check if bit 0 of
register 0 of the PMIC says it was powered because of a power button
press (0) or a plug-in event (1). If the value is 1 and this option
is selected, the device shuts down shortly after printing a message
to console stating the reason why it's shutting down. Powering up the
board with the power button is not affected.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
[Andre: reword to speak of boot, remove #ifdefs]
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-01-30 01:25:00 +00:00
Giulio Benetti
d0ffd15cff sunxi: dram_sun4i/5i: use DRAM_MEMORY_TYPE_DDR3 instead of magic number 3
Since DRAM_MEMORY_TYPE_DDR3 is defined let's use it instead of magic
number 3.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-01-30 01:03:37 +00:00
Icenowy Zheng
2753b07269 sunxi: call fdt_fixup_ethernet again to set macaddr for more aliases
Sometimes some ethernet aliases do not exist in U-Boot DT but they
exist in the DT used to boot the system (for example, modified via DT
overlays). In this situation setup_environment is called again in
ft_board_setup() to generate macaddr environment variable for them.
However now the call to fdt_fixup_ethernet() is moved before the call
of ft_board_setup().

Call fdt_fixup_ethernet() again to add MAC addresses for the extra
ethernet aliases.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
[updated commit message]
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-01-30 01:03:37 +00:00
Pali Rohár
92a0940796 Nokia RX-51: Convert documentation to rst format
Convert documentation to rst format

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-01-29 10:23:40 +01:00
Patrick Delaunay
046bdb8064 board: stm32mp1: solve compilation issue when ENV_IS_IN_MMC is deactivated
Solve compilation issue on undefined CONFIG_SYS_MMC_ENV_DEV when
CONFIG_ENV_IS_IN_MMC is deactivated on STMicroelectronics boards
defconfig

Fixes: 9f97193616 ("board: stm32mp1: use CONFIG_SYS_MMC_ENV_DEV when available")
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-01-24 11:00:47 +01:00
Heinrich Schuchardt
6ddc71c13e stm32mp: fix board_get_alt_info_mmc()
MAX_SEARCH_PARTITIONS is the highest possible partition number.
Do not skip the last partition in board_get_alt_info_mmc().

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-01-24 10:59:28 +01:00
Adam Ford
1a192f1622 arm: rmobile: rzg2_beacon: Migrate reset to SYSRESET_PSCI
Instead of a custom cpu_reset function, use the sysreset_psci
instead to reduce redundant code clutter.

Signed-off-by: Adam Ford <aford173@gmail.com>
2022-01-22 23:12:56 +01:00
Tom Rini
2d7a463e82 Merge https://source.denx.de/u-boot/custodians/u-boot-marvell
- fdt_support: Add fdt_for_each_node_by_compatible() helper macro
  (Marek)
- turris_omnia: Fixup SATA or PCIe nodes at runtime in DT blob (Pali)
- pci_mvebu: Add support for Kirkwood PCIe controllers (Pali)
- SPL: More verifications for kwbimage in SPL (Pali)
- mvebu: Remove comphy_update_map() (Pali)
- Minor misc stuff
2022-01-20 12:40:20 -05:00
Tom Rini
3918376e91 - Disable CONFIG_NET_RANDOM_ETHADDR for android configs
- meson64_android: define raw parts for bootloader to permit flashing with fastboot
 - vim3: configure serial# from ethaddr to permit using fastboot like sei510/610
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAmHpItEACgkQd9zb2sjI
 SdFSzRAAzDm/1khR4MXSTLjzBOs3N1ydxeqj7NtYU4tkf+vBjr62iOHUBeHx+DUv
 Z1WwOaBrQyinhPunrjCrTGfit/OgRqoDFgEiWUmctm/ZlxcG2fAklq2o7rL2jX1t
 uDvqeOgqW6N4ZXDlP1EXXZeUDzyYey0CGQzilXPlKqFOLXpOLYn40xznyhV2Rxkt
 l+R1LSGzMsPo4JVIMpfHRPseIBL0Ae7d23LT+M6FF/my0SZUjzuVzadhvNaBeIGb
 l+dP8enEPo1SCNP9BY+MO5zX4zyjc9T6EdYD4wqaMp23m+gAr3qW8tSbAv2H1aMr
 lsvalvHIGJWXyYGcWOIEfQwBYjFOdCpkIIDTg4GFwgmRKPAlBZrckatAl/TXbBJH
 nbAu+aHV/0dlCRgrFtIi//pnz3Ge1JGXSG1M71zbaXEXOJlFriWfq9KZdZ0TmcsE
 npHA9f4wlrWK9a8eRmNP7pbeXcDelFnIkVgxQfB2oyfEHSp/3EpKUkbF2EUVbK7G
 FyN4VaY3X/zgs9D5NdIeOMsqurF4h/s/yEMhzdQzoe76vXhxwzFHfdJaiZ/Nw7U8
 eL+SBvu9NqL1uMv/IrLVzSbKc0q01p1MlQvVYNumu1Wdt25brvcq4YNl8phS6weh
 quCOwUwp5s/r42V6TcDlipqIcntL5H8XaLvVPTarTH7C30aj0Hk=
 =tP9Y
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20220120' of https://source.denx.de/u-boot/custodians/u-boot-amlogic

- Disable CONFIG_NET_RANDOM_ETHADDR for android configs
- meson64_android: define raw parts for bootloader to permit flashing with fastboot
- vim3: configure serial# from ethaddr to permit using fastboot like sei510/610
2022-01-20 09:40:04 -05:00
Tom Rini
280db76f15 Pull request doc-2022-04-rc1
Replace @return by Return: in code comments.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAmHpCv4ACgkQxIHbvCwF
 GsRxNhAAkJXbngwkfdM5O3eZH2zuI0av9GDBLoFoxTWFviwDpCcyzb/XsQgZ8IE5
 Cff9Y6P/SlNPdoE4pvDFqAItvmrvcZ9b/oeAmhVDaMMv1dGEOV9uSQvuQkpJWt/V
 nHtRuCVjSK6qqor3fSTHNMyFcG+gkAG/+8T+KuU8gUDKECQgzJqgixcdKvTjF9jL
 DOIxVKAPRrxlzuJ0u2eovVSZFBB3mik7fnDmOGnbKjj87FvUuOZCX/VWCC5zMGmY
 eOi+C2ONnUleeivWAJrU6AxP28BkCR1q3U1F0LH2LVjolX8WZByYdzlBAOr3RkK0
 0sYxxShdrF+2cYmQP1/wo4z8AySkSBrbr6WTQ58i5vsqFm4sb1FF52cQHQOaFOaV
 Gp/NokHMuzhx7YQr4Ps0TvpROoW6L3Vt2SqA58FoHXzTvWpTi+terdAodL8rH3+1
 yGGNzYW6C79qqMKLclvuLvy/6IWf1UekTo45ocP47vhieRbxyGr8UZ8KMnX6Yx0e
 Y6U34K820fgfTLHM5MOgXMvBXqpskcWnR5hZWdrN9fJyqAZ7AxXQvdDDdIIEMPM9
 MBiFDH8seE62SkTbAEjrSU6RE76WovUISlegmBaB8ihs588au/BQCrsSxmNqT1SV
 SCp8D/GBSjwv+utWlneH6JKAIYxvpsgWeWzr27lA5F3m3j+5gKI=
 =iOT9
 -----END PGP SIGNATURE-----

Merge tag 'doc-2022-04-rc1' of https://source.denx.de/u-boot/custodians/u-boot-efi

Pull request doc-2022-04-rc1

Replace @return by Return: in code comments.
2022-01-20 09:39:45 -05:00
Pali Rohár
f33d67647f arm: mvebu: turris_mox: Convert comphy_update_map() to board_fix_fdt()
Code in board_fix_fdt() already detects connected MOX modules so there is
no need to have custom comphy_update_map() function for setting serdes
speeds.

This change sets phy-mode for MOX SFP module (when present) to sgmii.
Comphy driver then sets sgmii serdes speed for this module to 1.25G.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-20 14:46:03 +01:00
Pali Rohár
e3f92093d7 arm: mvebu: turris_omnia: Fixup SATA or PCIe nodes at runtime in DT blob
On of the MiniPCIe ports on Turris Omnia is also a mSATA port. Whether
it works in SATA or PCIe mode is determined by a strapping pin, which
value is read from the MCU.

We already determine which type of card is connected when configuring
SerDeses.

But until now we left both SATA and PCIe port 0 nodes in device tree
enabled, and so the SATA driver is probed in U-Boot / Linux even if we
know there is no mSATA card, and similarly PCIe driver tries to link on
port 0 even if we know there is mSATA card, not a PCIe card.

Fixup device tree blob to disable SATA node if mSATA card is not
present, and to disable PCIe port 0 node if mSATA card is present.

Do this for U-Boot's DT blob before relocation and also for kernel DT
blob before booting.

This ensures that software does not try to use SATA or PCIe HW when
corresponding PHY is not configured.

Signed-off-by: Pali Rohár <pali@kernel.org>
[ refactored and fixed some issues ]
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-20 11:35:29 +01:00
Marek Behún
3058e283b8 fdt_support: Add fdt_for_each_node_by_compatible() helper macro
Add macro fdt_for_each_node_by_compatible() to allow iterating over
fdt nodes by compatible string.

Convert various usages of
    off = fdt_node_offset_by_compatible(fdt, start, compat);
    while (off > 0) {
        code();
        off = fdt_node_offset_by_compatible(fdt, off, compat);
    }
and similar, to
    fdt_for_each_node_by_compatible(off, fdt, start, compat)
        code();

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-01-20 11:35:29 +01:00
Mattijs Korpershoek
09c2debab7 board: amlogic: vim3: configure serial# from ethaddr
The Khadas VIM3 and VIM3L boards, which are supported in Android via
Yukawa [1] need a serial number for usb/fastboot enumeration.

Whenever the environment does not provide a serial#, use the eth mac
address as serial#.

[1] https://source.android.com/setup/build/devices#vim3_and_vim3l_boards

Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220119142400.127342-1-mkorpershoek@baylibre.com
2022-01-20 09:50:54 +01:00
Heinrich Schuchardt
185f812c41 doc: replace @return by Return:
Sphinx expects Return: and not @return to indicate a return value.

find . -name '*.c' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

find . -name '*.h' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-01-19 18:11:34 +01:00
Tom Rini
068415eade Xilinx changes for v2022.04-rc1
gpio:
 - Add modepin driver
 
 net:
 - Save random mac addresses to eth variable
 
 zynqmp gem:
 - Add support for mdio bus DT description
 - Add support for reset and SGMII phy configuration
 - Reduce timeout for MDIO accesses
 
 zynqmp clk:
 - Fix clock handling for gem and usb
 
 phy:
 - Add zynqmp phy/serdes driver
 
 serial:
 - Add one missing compatible string
 
 microblaze:
 - Symbol alignement
 - SPL fixups
 - Code cleanups
 
 zynqmp:
 - Various dt changes, DP pre-reloc, gem resets, gem clocks
 - Switch SOM to shared psu configuration
 - Move dcache handling to firmware driver
 - Workaround gmii2rgmii DT description issue
 - Enable broadcasts again
 - Change firmware enablement logic
 - Small adjustement in firmware driver
 
 versal:
 - Support new mmc@ DT nodes
 - Fix run time variable handling
 - Add missing I2C_PMC ID for power domain
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCYeg7sQAKCRDKSWXLKUoM
 IVhJAKCAiNx/joEeFBJ0XgThtJzFhCjdMwCfYKY9Ewz4L0n2I56lDgR3UJroct0=
 =HtB+
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2022.04-rc1' of https://source.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx changes for v2022.04-rc1

gpio:
- Add modepin driver

net:
- Save random mac addresses to eth variable

zynqmp gem:
- Add support for mdio bus DT description
- Add support for reset and SGMII phy configuration
- Reduce timeout for MDIO accesses

zynqmp clk:
- Fix clock handling for gem and usb

phy:
- Add zynqmp phy/serdes driver

serial:
- Add one missing compatible string

microblaze:
- Symbol alignement
- SPL fixups
- Code cleanups

zynqmp:
- Various dt changes, DP pre-reloc, gem resets, gem clocks
- Switch SOM to shared psu configuration
- Move dcache handling to firmware driver
- Workaround gmii2rgmii DT description issue
- Enable broadcasts again
- Change firmware enablement logic
- Small adjustement in firmware driver

versal:
- Support new mmc@ DT nodes
- Fix run time variable handling
- Add missing I2C_PMC ID for power domain
2022-01-19 11:43:44 -05:00
Tom Rini
b24b201b60 Merge https://source.denx.de/u-boot/custodians/u-boot-samsung
- Updates for a{3,7}y17lte platforms
2022-01-19 08:09:34 -05:00
Ovidiu Panait
2fd81be11c common: board_r: move init_addr_map() to init.h
asm/mmu.h include is currently guarded by CONFIG_ADDR_MAP ifdef because
the header is only present on arm and powerpc. In order to remove the
dependency on this header and the associated ifdef, move init_addr_map()
declaration to init.h, since it is only called during the common init
sequence.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2022-01-18 08:31:02 -05:00
Tom Rini
4e81f3be34 Merge branch '2022-01-15-TI-platform-updates'
- Let am335x_evm use the CPSW or PRUSS ethernet.
- Implement timer_get_boot_us in the omap timer driver
- gpmc bitflip, QSPI clock calculation on am437x, da8xx_gpio bugfixes
- Assorted K3 updates
2022-01-17 11:24:43 -05:00
Tom Rini
6d2ebcd7be Second set of u-boot-at91 features for the 2022.04 cycle
-----BEGIN PGP SIGNATURE-----
 
 iQFQBAABCgA6FiEEqxhEmNJ6d7ZdeFLIHrMeAg6sL8gFAmHlNOccHGV1Z2VuLmhy
 aXN0ZXZAbWljcm9jaGlwLmNvbQAKCRAesx4CDqwvyL0JB/4+sKNWPMgOYvP2uLCC
 euRGomhxJ5WmxJVDtJeBIRg0YKSkwnE8JwIN2qqGu15xJnNX9Ck5qnIMPbiZ/io9
 ocW5Z/4C4rfJX/OzD6FtmbMNsvG/umVmZkjRU3ryRXKGyNVpVjLQ2EEECaJfk1WZ
 Nd/J6/Jo8nafb1x4OeY+F6+xwZAuj7Mrun9SsDSyrIvmEqSnaQNioj+lStkauL51
 NwQgBxZBQmbdCgF7Ooy6rYlXZBR6r/rgWB9n3RP8emDCwfCMul9HOMT432oKNbhW
 bGrcMu9AWv/pgzXogxSzYbEdTAnoVEODtU1suCa8LV6KJPEG693gARnRm/KjvPHa
 FfsK
 =39IY
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-at91-2022.04-b' of https://source.denx.de/u-boot/custodians/u-boot-at91

Second set of u-boot-at91 features for the 2022.04 cycle:

This small feature set includes few changes for sama7g5 and sama7g5ek:
turn blue led on at boot, changes required for the Rev4 of the board,
better sync with the Linux DT with regards to the new DT nodes.
2022-01-17 08:36:12 -05:00
Amjad Ouled-Ameur
609983e981 board: ti: am335x: Choose CPSW or PRUSS configuration based on jumper setting
The am335x-ice-v2 board's Ethernet ports can be configured
in 'MII' or 'RMII' mode to be connected to 'PRUSS' or 'CPSW'
Ethernet subsystems.

This patch sets the environment variable 'ice_mii' to
'mii' or 'rmii' accordingly. Based on that we choose the
appropriate board devicetree i.e. 'am335x-ice-v2.dtb' or
'am335x-ice-v2-prueth.dtb'.

Since there are 2 Ethernet ports with 2 modes, there can be 4
configurations but for now we consider both ports in different modes
to be an invalid configuration and prevent boot in that case.

Signed-off-by: Roger Quadros <rogerq@ti.com>
[Amjad: use overlay instead of using new am335x-ice-v2-prueth.dtb]
Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
[trini: Make prueth_is_mii be marked __maybe_unused]
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-01-16 08:31:03 -05:00
Vignesh Raghavendra
70bcd249f4 board: ti: am64x: Init DRAM size in R5/A53 SPL
Call dram_init_banksize() from spl_board_init() otherwise TFTP download
fails due to lmb_get_free_size() not able to find unreserved region due
to lack of DRAM size info. Required to support Ethernet boot on AM64x.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2022-01-15 10:38:26 -05:00
Marek Behún
28c1922675 board: gdsys: Drop Dirk Eibach from MAINTAINERS
I got an

<dirk.eibach@gdsys.cc>: host mxlb.ispgateway.de[80.67.18.126] said:
  554 Sorry, no mailbox here by that name. (in reply to RCPT TO command)

when sending e-mail to dirk.eibach@gdsys.cc.

Drop Dirk Eibach from MAINTAINERS of board/gdsys/a38x and
board/gdsys/mpc8308. The latter would be left maintainerless, add
Mario Six <mario.six@gdsys.cc> (he is also maintainer of the former
board).

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-14 07:47:57 +01:00
Tony Dinh
1b24de6e9f arm: kirkwood: iConnect : Update board maintainer
Add myself as maintainer.

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-14 07:47:57 +01:00
Tony Dinh
bbebd5b0a5 arm: kirkwood: iConnect : Add PCIe late init
- Add board_late_init function to enable pci_init

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-14 07:47:57 +01:00
Pali Rohár
2ac06f3e66 board: gdsys: a38x: Enable PCIe link 2 in spl_board_init()
A385 controlcenterdc board does not use PCI DM properly and touches some
PCIe devices directly in its board code.

This controlcenterdc spl_board_init() function expects that PCIe link is
already initialized. Link itself is initialized in a38x serdes code but
this will change in future and link initialization will be postponed from
U-Boot SPL to proper U-Boot.

So explicitly enable PCIe link 2 in spl_board_init() function via
SoC Control Register 1 to not break this code by future changes. This board
has PCIe link 2 just x1, so no additional initialization (except enabling
PCIe port) is needed.

Signed-off-by: Pali Rohár <pali@kernel.org>
2022-01-14 07:47:57 +01:00
Pali Rohár
8f9e0f4d20 arm: mvebu: Convert board_pex_config() to CONFIG_SPL_BOARD_INIT
The only user of board_pex_config() weak function is A385 controlcenterdc
board. It looks like that code in its board_pex_config() function needs to
be executed after PCIe link is up. Therefore put this code into
spl_board_init() function which is called after a38x serdes initialization,
and therefore it is after the serdes hws_pex_config() function finishes
(which is the state before this change).

With this change completely remove board_pex_config() function as it is not
used anymore.

Signed-off-by: Pali Rohár <pali@kernel.org>
2022-01-14 07:47:57 +01:00
Mihai Sain
93ddc09da2 board: sama7g5ek: set blue led on at boot time
Set blue led on at boot time in order to highlight that u-boot is loaded.

Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
2022-01-13 11:45:00 +02:00
Henrik Grimler
00809bd4e9 board: samsung: fix menu entries for a{3,7}y17lte
a7y17lte is called SM-A720F, and a3y17lte SM-A320F.  a3y17lte also
should select PINCTRL_EXYNOS78x0, not the (non-existent)
PINCTRL_EXYNOS7880, and it has an Exynos 7870 SoC and not 7880.

Fixes: 3e2095e960 ("board: samsung: add support for Galaxy A series
of 2017 (a5y17lte)")
Signed-off-by: Henrik Grimler <henrik@grimler.se>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2022-01-13 14:33:00 +09:00
Pali Rohár
ca4b097d7b vexpress64: Remove unused macro XR3PCI_ECAM_OFFSET
Macro XR3PCI_ECAM_OFFSET is unused and in case it would be needed in future
it can be replaced by standard PCIE_ECAM_OFFSET macro from pci.h file.

Signed-off-by: Pali Rohár <pali@kernel.org>
2022-01-12 14:21:24 -05:00
Tom Rini
fe04d885fb Merge branch 'next'
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-01-10 14:01:57 -05:00
Tom Rini
0dadad6d7c - disable CONFIG_NET_RANDOM_ETHADDR when unnecessary on amlogic based configs
- meson64_android: add board specific env settings, in order to support VIM3/L for android
 - add changes to support VIM3/L android boot by using meson64_android.h config
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAmHYV8MACgkQd9zb2sjI
 SdELkA/+LjyjJB1KI6/KLLg43zyFeeZX/SjQd5BUIx6EfaCgyTkuq2lzQnErGmbi
 HoyMoNLpBxLIL27/5TXPzmKYAeOfKPxA/sXTTtx/l7PG8ncSZIoU0+utqjycdUsK
 tSi7EdFzk7/kDDRkqqA7q9nxsPn/7GQNh/ZC9zstMXKaTO/TEb/sZWCMcvQ0MNoB
 ynZKOCg5t60UkIYIRwZwC/OS/ssn86dovv/Aa/8D6qpL2AbS5DoCXHuAr8Dnz7fJ
 q4rV7oLh7a+WHe/qC7R6ylYFIVVqY5JaIgbLDwuvk1z9o7txchMMQnGgllZ35sN9
 LECD2iSDGjhPaHuGCvQwl3TWtIpvtdcP4sQTyJhsXNPxCG6HHvRz7xY4erUohR1I
 LIddwCCHeCrBiaamXNbCzph2+JhfPSQ5ETCL9M6iBMxNUPunlCxjfjDzlT/pg11p
 EO9PIPjRMR9QhxKtd3gZpyAqPuMBEmIwhDtHI6dL3DNOOsF44ObE4swnzS6qXIDn
 jRZzFCC2f/Vyg11YnzFtV3A5eWwJahGDWAGAnnlg6Y8GCLlLmDJitcgA/rWSALko
 T5fC8L8IFUx2RnHczyitJ/wqJl9FqOAnIaoB3Trpwp8gFQ15dQjbvoXldQnAjSS2
 9bns3zOrx79EF4lbHhwNE9UDLm6OjK5vR3h4bGJvyZBmasVsA90=
 =dLEg
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20220107' of https://source.denx.de/u-boot/custodians/u-boot-amlogic into next

- disable CONFIG_NET_RANDOM_ETHADDR when unnecessary on amlogic based configs
- meson64_android: add board specific env settings, in order to support VIM3/L for android
- add changes to support VIM3/L android boot by using meson64_android.h config
2022-01-09 07:56:31 -05:00