Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-10 15:14:43 +00:00
Code Issues Projects Releases Packages Wiki Activity

sunxi: Add option to prevent booting on power plug-in

Browse source 
For sunxi boards with the AXP209, AXP221, AXP809, and AXP818 PMICs
(plus possibly others, I only confirmed the datasheets for these),
it is sometimes desirable to not boot whenever the device is
plugged in. An example would be when using the NTC CHIP inside a
PocketCHIP.
This provides a configurable option to check if bit 0 of
register 0 of the PMIC says it was powered because of a power button
press (0) or a plug-in event (1). If the value is 1 and this option
is selected, the device shuts down shortly after printing a message
to console stating the reason why it's shutting down. Powering up the
board with the power button is not affected.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
[Andre: reword to speak of boot, remove #ifdefs]
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
This commit is contained in:
Chris Morgan 2022-01-21 13:37:32 +00:00 committed by Andre Przywara
parent 78592c094e
commit 52bcc4f053
2 changed files with 21 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

10
arch/arm/mach-sunxi/Kconfig
View file

@ -785,6 +785,16 @@ config AXP_GPIO
---help---
Say Y here to enable support for the gpio pins of the axp PMIC ICs.
config AXP_DISABLE_BOOT_ON_POWERON
bool "Disable device boot on power plug-in"
depends on AXP209_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER
default n
---help---
Say Y here to prevent the device from booting up because of a plug-in
event. When set, the device will boot into the SPL briefly to
determine why it was powered on, and if it was determined because of
a plug-in event instead of a button press event it will shut back off.
config VIDEO_SUNXI
bool "Enable graphical uboot console on HDMI, LCD or VGA"
depends on !MACH_SUN8I_A83T

11
board/sunxi/board.c
View file

@ -28,6 +28,7 @@
#include <asm/arch/dram.h>
#include <asm/arch/mmc.h>
#include <asm/arch/prcm.h>
#include <asm/arch/pmic_bus.h>
#include <asm/arch/spl.h>
#include <asm/global_data.h>
#include <linux/delay.h>
@ -602,6 +603,16 @@ void sunxi_board_init(void)
defined CONFIG_AXP809_POWER || defined CONFIG_AXP818_POWER
power_failed = axp_init();
if (IS_ENABLED(CONFIG_AXP_DISABLE_BOOT_ON_POWERON) && !power_failed) {
u8 boot_reason;
pmic_bus_read(AXP_POWER_STATUS, &boot_reason);
if (boot_reason & AXP_POWER_STATUS_ALDO_IN) {
printf("Power on by plug-in, shutting down.\n");
pmic_bus_write(0x32, BIT(7));
}
}
#if defined CONFIG_AXP221_POWER || defined CONFIG_AXP809_POWER || \
defined CONFIG_AXP818_POWER
power_failed |= axp_set_dcdc1(CONFIG_AXP_DCDC1_VOLT);