mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-24 13:43:28 +00:00
board: bsh: imx8mn_bsh_smm_s2/s2pro: enable DM_SERIAL
Enable DM_SERIAL for both U_Boot and the SPL. The uart4 and its pinmux are already marked with u-boot,dm-spl but we need to move the call to preloader_console_init() after spl_init() to avoid a board hang as dm can't be used until after spl_init(). Remove the manual config of the UART pinmux now that it is no longer needed. Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Cc: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Tested-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
This commit is contained in:
parent
6a21c69521
commit
0016e62813
3 changed files with 4 additions and 9 deletions
|
@ -40,14 +40,8 @@ void spl_board_init(void)
|
|||
puts("Failed to find clock node. Check device tree\n");
|
||||
}
|
||||
|
||||
#define UART_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_FSEL1)
|
||||
#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE)
|
||||
|
||||
static const iomux_v3_cfg_t uart_pads[] = {
|
||||
IMX8MN_PAD_UART4_RXD__UART4_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
|
||||
IMX8MN_PAD_UART4_TXD__UART4_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
|
||||
};
|
||||
|
||||
static const iomux_v3_cfg_t wdog_pads[] = {
|
||||
IMX8MN_PAD_GPIO1_IO02__WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL),
|
||||
};
|
||||
|
@ -59,7 +53,6 @@ int board_early_init_f(void)
|
|||
imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
|
||||
set_wdog_reset(wdog);
|
||||
|
||||
imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
|
||||
init_uart_clk(3);
|
||||
|
||||
if (IS_ENABLED(CONFIG_NAND_MXS)) {
|
||||
|
@ -82,14 +75,14 @@ void board_init_f(ulong dummy)
|
|||
|
||||
timer_init();
|
||||
|
||||
preloader_console_init();
|
||||
|
||||
ret = spl_init();
|
||||
if (ret) {
|
||||
debug("spl_init() failed: %d\n", ret);
|
||||
hang();
|
||||
}
|
||||
|
||||
preloader_console_init();
|
||||
|
||||
/* DDR initialization */
|
||||
spl_dram_init();
|
||||
|
||||
|
|
|
@ -80,6 +80,7 @@ CONFIG_SPL_DM_PMIC_BD71837=y
|
|||
CONFIG_DM_REGULATOR=y
|
||||
CONFIG_DM_REGULATOR_FIXED=y
|
||||
CONFIG_DM_REGULATOR_GPIO=y
|
||||
CONFIG_DM_SERIAL=y
|
||||
CONFIG_MXC_UART=y
|
||||
CONFIG_SYSRESET=y
|
||||
CONFIG_SYSRESET_PSCI=y
|
||||
|
|
|
@ -77,6 +77,7 @@ CONFIG_SPL_DM_PMIC_BD71837=y
|
|||
CONFIG_DM_REGULATOR=y
|
||||
CONFIG_DM_REGULATOR_FIXED=y
|
||||
CONFIG_DM_REGULATOR_GPIO=y
|
||||
CONFIG_DM_SERIAL=y
|
||||
CONFIG_MXC_UART=y
|
||||
CONFIG_SYSRESET=y
|
||||
CONFIG_SYSRESET_PSCI=y
|
||||
|
|
Loading…
Reference in a new issue