# Objective
Fix https://github.com/bevyengine/bevy/issues/11657
## Solution
Add a `ReflectKind` enum, add `Reflect::reflect_kind` which returns a
`ReflectKind`, and add `kind` method implementions to `ReflectRef`,
`ReflectMut`, and `ReflectOwned`, which returns a `ReflectKind`.
I also changed `AccessError` to use this new struct instead of it's own
`TypeKind` struct.
---
## Changelog
- Added `ReflectKind`, an enumeration over the kinds of a reflected type
without its data.
- Added `Reflect::reflect_kind` (with default implementation)
- Added implementation for the `kind` method on `ReflectRef`,
`ReflectMut`, and `ReflectOwned` which gives their kind without any
information, as a `ReflectKind`
# Objective
- Fixes#11740
## Solution
- Turned `Mesh::set_indices` into `Mesh::insert_indices` and added
related methods for completeness.
---
## Changelog
- Replaced `Mesh::set_indices(indices: Option<Indices>)` with
`Mesh::insert_indices(indices: Indices)`
- Replaced `Mesh::with_indices(indices: Option<Indices>)` with
`Mesh::with_inserted_indices(indices: Indices)` and
`Mesh::with_removed_indices()` mirroring the API for inserting /
removing attributes.
- Updated the examples and internal uses of the APIs described above.
## Migration Guide
- Use `Mesh::insert_indices` or `Mesh::with_inserted_indices` instead of
`Mesh::set_indices` / `Mesh::with_indices`.
- If you have passed `None` to `Mesh::set_indices` or
`Mesh::with_indices` you should use `Mesh::remove_indices` or
`Mesh::with_removed_indices` instead.
---------
Co-authored-by: François <mockersf@gmail.com>
# Objective
- System `create_surfaces` needs to happen before `prepare_windows` or
we lose one frame at startup
## Solution
- Specify the ordering, remove the set as it doesn't mean anything there
# Objective
Split up from #11007, fixing most of the remaining work for #10569.
Implement `Meshable` for `Cuboid`, `Sphere`, `Cylinder`, `Capsule`,
`Torus`, and `Plane3d`. This covers all shapes that Bevy has mesh
structs for in `bevy_render::mesh::shapes`.
`Cone` and `ConicalFrustum` are new shapes, so I can add them in a
follow-up, or I could just add them here directly if that's preferrable.
## Solution
Implement `Meshable` for `Cuboid`, `Sphere`, `Cylinder`, `Capsule`,
`Torus`, and `Plane3d`.
The logic is mostly just a copy of the the existing `bevy_render`
shapes, but `Plane3d` has a configurable surface normal that affects the
orientation. Some property names have also been changed to be more
consistent.
The default values differ from the old shapes to make them a bit more
logical:
- Spheres now have a radius of 0.5 instead of 1.0. The default capsule
is equivalent to the default cylinder with the sphere's halves glued on.
- The inner and outer radius of the torus are now 0.5 and 1.0 instead of
0.5 and 1.5 (i.e. the new minor and major radii are 0.25 and 0.75). It's
double the width of the default cuboid, half of its height, and the
default sphere matches the size of the hole.
- `Cuboid` is 1x1x1 by default unlike the dreaded `Box` which is 2x1x1.
Before, with "old" shapes:
Now, with primitive meshing:
I only changed the `3d_shapes` example to use primitives for now. I can
change them all in this PR or a follow-up though, whichever way is
preferrable.
### Sphere API
Spheres have had separate `Icosphere` and `UVSphere` structs, but with
primitives we only have one `Sphere`.
We need to handle this with builders:
```rust
// Existing structs
let ico = Mesh::try_from(Icophere::default()).unwrap();
let uv = Mesh::from(UVSphere::default());
// Primitives
let ico = Sphere::default().mesh().ico(5).unwrap();
let uv = Sphere::default().mesh().uv(32, 18);
```
We could add methods on `Sphere` directly to skip calling `.mesh()`.
I also added a `SphereKind` enum that can be used with the `kind`
method:
```rust
let ico = Sphere::default()
.mesh()
.kind(SphereKind::Ico { subdivisions: 8 })
.build();
```
The default mesh for a `Sphere` is an icosphere with 5 subdivisions
(like the default `Icosphere`).
---
## Changelog
- Implement `Meshable` and `Default` for `Cuboid`, `Sphere`, `Cylinder`,
`Capsule`, `Torus`, and `Plane3d`
- Use primitives in `3d_shapes` example
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
During my exploratory work on the remote editor, I found a couple of
types that were either not registered, or that were missing
`ReflectDefault`.
## Solution
- Added registration and `ReflectDefault` where applicable
- (Drive by fix) Moved `Option<f32>` registration to `bevy_core` instead
of `bevy_ui`, along with similar types.
---
## Changelog
- Fixed: Registered `FogSettings`, `FogFalloff`,
`ParallaxMappingMethod`, `OpaqueRendererMethod` structs for reflection
- Fixed: Registered `ReflectDefault` trait for `ColorGrading` and
`CascadeShadowConfig` structs
# Objective
- There are too many `NonSendMarker`
https://docs.rs/bevy/0.12.1/bevy/index.html?search=nonsendmarker
- There should be only one
## Solution
- Use the marker type from bevy_core in bevy_render
---
## Migration Guide
- If you were using `bevy::render::view::NonSendMarker` or
`bevy::render::view:🪟:NonSendMarker`, use
`bevy::core::NonSendMarker` instead
# Objective
- Change set of systems as I made a mistake in #11672
- Don't block main when not needed
- Fixes#11235
## Solution
- add a run condition so that the system won't run and block main if not
needed
# Objective
- Some places manually use a `bool` /`AtomicBool` to warn once.
## Solution
- Use the `warn_once` macro which internally creates an `AtomicBool`.
Downside: in some case the warning state would have been reset after
recreating the struct carrying the warn state, whereas now it will
always warn only once per program run (For example, if all
`MeshPipeline`s are dropped or the `World` is recreated for
`Local<bool>`/ a `bool` resource, which shouldn't happen over the course
of a standard `App` run).
---
## Changelog
### Removed
- `FontAtlasWarning` has been removed, but the corresponding warning is
still emitted.
# Objective
- Pipeline compilation is slow and blocks the frame
- Closes https://github.com/bevyengine/bevy/issues/8224
## Solution
- Compile pipelines in a Task on the AsyncComputeTaskPool
---
## Changelog
- Render/compute pipeline compilation is now done asynchronously over
multiple frames when the multi-threaded feature is enabled and on
non-wasm and non-macOS platforms
- Added `CachedPipelineState::Creating`
- Added `PipelineCache::block_on_render_pipeline()`
- Added `bevy_utils::futures::check_ready`
- Added `bevy_render/multi-threaded` cargo feature
## Migration Guide
- Match on the new `Creating` variant for exhaustive matches of
`CachedPipelineState`
# Objective
Fixes#11653
## Solution
- Just added the formats to the docstring, I played around with having
the format appear in the type somehow so that it didn't need to be
written manually in the docstring but it ended up being more trouble
than it was worth.
Co-authored-by: James Liu <contact@jamessliu.com>
Frustum computation is nontrivial amount of code private in
`update_frusta` system.
Make it public.
This is needed to decide which entities to spawn/despawn in `Update`
based on camera changes. But if `Update` also changed camera, frustum is
not yet recomputed.
Technically it is probably possible to run an iteration of
`update_frusta` system by a user in `Update` schedule after propagating
`GlobalTransform` to the cameras, but it is easier to just compute
frustum manually using API added in this PR.
Also replace two places where this code is used.
---------
Co-authored-by: vero <email@atlasdostal.com>
Use `TypeIdMap<T>` instead of `HashMap<TypeId, T>`
- ~~`TypeIdMap` was in `bevy_ecs`. I've kept it there because of
#11478~~
- ~~I haven't swapped `bevy_reflect` over because it doesn't depend on
`bevy_ecs`, but I'd also be happy with moving `TypeIdMap` to
`bevy_utils` and then adding a dependency to that~~
- ~~this is a slight change in the public API of
`DrawFunctionsInternal`, does this need to go in the changelog?~~
## Changelog
- moved `TypeIdMap` to `bevy_utils`
- changed `DrawFunctionsInternal::indices` to `TypeIdMap`
## Migration Guide
- `TypeIdMap` now lives in `bevy_utils`
- `DrawFunctionsInternal::indices` now uses a `TypeIdMap`.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Currently the `missing_docs` lint is allowed-by-default and enabled at
crate level when their documentations is complete (see #3492).
This PR proposes to inverse this logic by making `missing_docs`
warn-by-default and mark crates with imcomplete docs allowed.
## Solution
Makes `missing_docs` warn at workspace level and allowed at crate level
when the docs is imcomplete.
# Objective
- Allow prepare windows to run off of the main thread on all platforms.
- Fixes https://github.com/bevyengine/bevy/issues/9964 on all platforms.
## Solution
- Running `prepare_windows` on the main thread on apple platforms is
only mandatory to create surface, which is only needed during window
creation. Split that part into its own system that happens before
`prepare_windows`
- Tested on macOS and iOS
---
## Changelog
- Allow prepare windows to run off main thread on all platforms.
# Objective
- In #9822 I forgot to disable auto sync points on the Extract Schedule.
We want to do this because the Commands on the Extract Schedule should
be applied on the render thread.
# Objective
- Allow prepare windows to run off of the main thread on platforms that
allow it.
- Fixes https://github.com/bevyengine/bevy/issues/9964 on most
platforms.
## Solution
- Conditionally compile prepare windows for different OS's
- Seems like it's only the call to `create_surface` that needs to run on
the main thread here.
- I've only tested this on windows, but I do see prepare windows running
on other threads.
---
## Changelog
- Allow prepare windows to run off main thread on platforms that allow
it.
# Objective
The whole `Cow<'static, str>` naming for nodes and subgraphs in
`RenderGraph` is a mess.
## Solution
Replaces hardcoded and potentially overlapping strings for nodes and
subgraphs inside `RenderGraph` with bevy's labelsystem.
---
## Changelog
* Two new labels: `RenderLabel` and `RenderSubGraph`.
* Replaced all uses for hardcoded strings with those labels
* Moved `Taa` label from its own mod to all the other `Labels3d`
* `add_render_graph_edges` now needs a tuple of labels
* Moved `ScreenSpaceAmbientOcclusion` label from its own mod with the
`ShadowPass` label to `LabelsPbr`
* Removed `NodeId`
* Renamed `Edges.id()` to `Edges.label()`
* Removed `NodeLabel`
* Changed examples according to the new label system
* Introduced new `RenderLabel`s: `Labels2d`, `Labels3d`, `LabelsPbr`,
`LabelsUi`
* Introduced new `RenderSubGraph`s: `SubGraph2d`, `SubGraph3d`,
`SubGraphUi`
* Removed `Reflect` and `Default` derive from `CameraRenderGraph`
component struct
* Improved some error messages
## Migration Guide
For Nodes and SubGraphs, instead of using hardcoded strings, you now
pass labels, which can be derived with structs and enums.
```rs
// old
#[derive(Default)]
struct MyRenderNode;
impl MyRenderNode {
pub const NAME: &'static str = "my_render_node"
}
render_app
.add_render_graph_node::<ViewNodeRunner<MyRenderNode>>(
core_3d::graph::NAME,
MyRenderNode::NAME,
)
.add_render_graph_edges(
core_3d::graph::NAME,
&[
core_3d::graph::node::TONEMAPPING,
MyRenderNode::NAME,
core_3d::graph::node::END_MAIN_PASS_POST_PROCESSING,
],
);
// new
use bevy::core_pipeline::core_3d::graph::{Labels3d, SubGraph3d};
#[derive(Debug, Hash, PartialEq, Eq, Clone, RenderLabel)]
pub struct MyRenderLabel;
#[derive(Default)]
struct MyRenderNode;
render_app
.add_render_graph_node::<ViewNodeRunner<MyRenderNode>>(
SubGraph3d,
MyRenderLabel,
)
.add_render_graph_edges(
SubGraph3d,
(
Labels3d::Tonemapping,
MyRenderLabel,
Labels3d::EndMainPassPostProcessing,
),
);
```
### SubGraphs
#### in `bevy_core_pipeline::core_2d::graph`
| old string-based path | new label |
|-----------------------|-----------|
| `NAME` | `SubGraph2d` |
#### in `bevy_core_pipeline::core_3d::graph`
| old string-based path | new label |
|-----------------------|-----------|
| `NAME` | `SubGraph3d` |
#### in `bevy_ui::render`
| old string-based path | new label |
|-----------------------|-----------|
| `draw_ui_graph::NAME` | `graph::SubGraphUi` |
### Nodes
#### in `bevy_core_pipeline::core_2d::graph`
| old string-based path | new label |
|-----------------------|-----------|
| `node::MSAA_WRITEBACK` | `Labels2d::MsaaWriteback` |
| `node::MAIN_PASS` | `Labels2d::MainPass` |
| `node::BLOOM` | `Labels2d::Bloom` |
| `node::TONEMAPPING` | `Labels2d::Tonemapping` |
| `node::FXAA` | `Labels2d::Fxaa` |
| `node::UPSCALING` | `Labels2d::Upscaling` |
| `node::CONTRAST_ADAPTIVE_SHARPENING` |
`Labels2d::ConstrastAdaptiveSharpening` |
| `node::END_MAIN_PASS_POST_PROCESSING` |
`Labels2d::EndMainPassPostProcessing` |
#### in `bevy_core_pipeline::core_3d::graph`
| old string-based path | new label |
|-----------------------|-----------|
| `node::MSAA_WRITEBACK` | `Labels3d::MsaaWriteback` |
| `node::PREPASS` | `Labels3d::Prepass` |
| `node::DEFERRED_PREPASS` | `Labels3d::DeferredPrepass` |
| `node::COPY_DEFERRED_LIGHTING_ID` | `Labels3d::CopyDeferredLightingId`
|
| `node::END_PREPASSES` | `Labels3d::EndPrepasses` |
| `node::START_MAIN_PASS` | `Labels3d::StartMainPass` |
| `node::MAIN_OPAQUE_PASS` | `Labels3d::MainOpaquePass` |
| `node::MAIN_TRANSMISSIVE_PASS` | `Labels3d::MainTransmissivePass` |
| `node::MAIN_TRANSPARENT_PASS` | `Labels3d::MainTransparentPass` |
| `node::END_MAIN_PASS` | `Labels3d::EndMainPass` |
| `node::BLOOM` | `Labels3d::Bloom` |
| `node::TONEMAPPING` | `Labels3d::Tonemapping` |
| `node::FXAA` | `Labels3d::Fxaa` |
| `node::UPSCALING` | `Labels3d::Upscaling` |
| `node::CONTRAST_ADAPTIVE_SHARPENING` |
`Labels3d::ContrastAdaptiveSharpening` |
| `node::END_MAIN_PASS_POST_PROCESSING` |
`Labels3d::EndMainPassPostProcessing` |
#### in `bevy_core_pipeline`
| old string-based path | new label |
|-----------------------|-----------|
| `taa::draw_3d_graph::node::TAA` | `Labels3d::Taa` |
#### in `bevy_pbr`
| old string-based path | new label |
|-----------------------|-----------|
| `draw_3d_graph::node::SHADOW_PASS` | `LabelsPbr::ShadowPass` |
| `ssao::draw_3d_graph::node::SCREEN_SPACE_AMBIENT_OCCLUSION` |
`LabelsPbr::ScreenSpaceAmbientOcclusion` |
| `deferred::DEFFERED_LIGHTING_PASS` | `LabelsPbr::DeferredLightingPass`
|
#### in `bevy_render`
| old string-based path | new label |
|-----------------------|-----------|
| `main_graph::node::CAMERA_DRIVER` | `graph::CameraDriverLabel` |
#### in `bevy_ui::render`
| old string-based path | new label |
|-----------------------|-----------|
| `draw_ui_graph::node::UI_PASS` | `graph::LabelsUi::UiPass` |
---
## Future work
* Make `NodeSlot`s also use types. Ideally, we have an enum with unit
variants where every variant resembles one slot. Then to make sure you
are using the right slot enum and make rust-analyzer play nicely with
it, we should make an associated type in the `Node` trait. With today's
system, we can introduce 3rd party slots to a node, and i wasnt sure if
this was used, so I didn't do this in this PR.
## Unresolved Questions
When looking at the `post_processing` example, we have a struct for the
label and a struct for the node, this seems like boilerplate and on
discord, @IceSentry (sowy for the ping)
[asked](https://discord.com/channels/691052431525675048/743663924229963868/1175197016947699742)
if a node could automatically introduce a label (or i completely
misunderstood that). The problem with that is, that nodes like
`EmptyNode` exist multiple times *inside the same* (sub)graph, so there
we need extern labels to distinguish between those. Hopefully we can
find a way to reduce boilerplate and still have everything unique. For
EmptyNode, we could maybe make a macro which implements an "empty node"
for a type, but for nodes which contain code and need to be present
multiple times, this could get nasty...
# Objective
Right now, all assets in the main world get extracted and prepared in
the render world (if the asset's using the RenderAssetPlugin). This is
unfortunate for two cases:
1. **TextureAtlas** / **FontAtlas**: This one's huge. The individual
`Image` assets that make up the atlas are cloned and prepared
individually when there's no reason for them to be. The atlas textures
are built on the CPU in the main world. *There can be hundreds of images
that get prepared for rendering only not to be used.*
2. If one loads an Image and needs to transform it in a system before
rendering it, kind of like the [decompression
example](https://github.com/bevyengine/bevy/blob/main/examples/asset/asset_decompression.rs#L120),
there's a price paid for extracting & preparing the asset that's not
intended to be rendered yet.
------
* References #10520
* References #1782
## Solution
This changes the `RenderAssetPersistencePolicy` enum to bitflags. I felt
that the objective with the parameter is so similar in nature to wgpu's
[`TextureUsages`](https://docs.rs/wgpu/latest/wgpu/struct.TextureUsages.html)
and
[`BufferUsages`](https://docs.rs/wgpu/latest/wgpu/struct.BufferUsages.html),
that it may as well be just like that.
```rust
// This asset only needs to be in the main world. Don't extract and prepare it.
RenderAssetUsages::MAIN_WORLD
// Keep this asset in the main world and
RenderAssetUsages::MAIN_WORLD | RenderAssetUsages::RENDER_WORLD
// This asset is only needed in the render world. Remove it from the asset server once extracted.
RenderAssetUsages::RENDER_WORLD
```
### Alternate Solution
I considered introducing a third field to `RenderAssetPersistencePolicy`
enum:
```rust
enum RenderAssetPersistencePolicy {
/// Keep the asset in the main world after extracting to the render world.
Keep,
/// Remove the asset from the main world after extracting to the render world.
Unload,
/// This doesn't need to be in the render world at all.
NoExtract, // <-----
}
```
Functional, but this seemed like shoehorning. Another option is renaming
the enum to something like:
```rust
enum RenderAssetExtractionPolicy {
/// Extract the asset and keep it in the main world.
Extract,
/// Remove the asset from the main world after extracting to the render world.
ExtractAndUnload,
/// This doesn't need to be in the render world at all.
NoExtract,
}
```
I think this last one could be a good option if the bitflags are too
clunky.
## Migration Guide
* `RenderAssetPersistencePolicy::Keep` → `RenderAssetUsage::MAIN_WORLD |
RenderAssetUsage::RENDER_WORLD` (or `RenderAssetUsage::default()`)
* `RenderAssetPersistencePolicy::Unload` →
`RenderAssetUsage::RENDER_WORLD`
* For types implementing the `RenderAsset` trait, change `fn
persistence_policy(&self) -> RenderAssetPersistencePolicy` to `fn
asset_usage(&self) -> RenderAssetUsages`.
* Change any references to `cpu_persistent_access`
(`RenderAssetPersistencePolicy`) to `asset_usage` (`RenderAssetUsage`).
This applies to `Image`, `Mesh`, and a few other types.
# Objective
The first part of #10569, split up from #11007.
The goal is to implement meshing support for Bevy's new geometric
primitives, starting with 2D primitives. 3D meshing will be added in a
follow-up, and we can consider removing the old mesh shapes completely.
## Solution
Add a `Meshable` trait that primitives need to implement to support
meshing, as suggested by the
[RFC](https://github.com/bevyengine/rfcs/blob/main/rfcs/12-primitive-shapes.md#meshing).
```rust
/// A trait for shapes that can be turned into a [`Mesh`].
pub trait Meshable {
/// The output of [`Self::mesh`]. This can either be a [`Mesh`]
/// or a builder used for creating a [`Mesh`].
type Output;
/// Creates a [`Mesh`] for a shape.
fn mesh(&self) -> Self::Output;
}
```
This PR implements it for the following primitives:
- `Circle`
- `Ellipse`
- `Rectangle`
- `RegularPolygon`
- `Triangle2d`
The `mesh` method typically returns a builder-like struct such as
`CircleMeshBuilder`. This is needed to support shape-specific
configuration for things like mesh resolution or UV configuration:
```rust
meshes.add(Circle { radius: 0.5 }.mesh().resolution(64));
```
Note that if no configuration is needed, you can even skip calling
`mesh` because `From<MyPrimitive>` is implemented for `Mesh`:
```rust
meshes.add(Circle { radius: 0.5 });
```
I also updated the `2d_shapes` example to use primitives, and tweaked
the colors to have better contrast against the dark background.
Before:
After:
Here you can see the UVs and different facing directions: (taken from
#11007, so excuse the 3D primitives at the bottom left)
---
## Changelog
- Added `bevy_render::mesh::primitives` module
- Added `Meshable` trait and implemented it for:
- `Circle`
- `Ellipse`
- `Rectangle`
- `RegularPolygon`
- `Triangle2d`
- Implemented `Default` and `Copy` for several 2D primitives
- Updated `2d_shapes` example to use primitives
- Tweaked colors in `2d_shapes` example to have better contrast against
the (new-ish) dark background
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
It can sometimes be useful to transform actual `Mesh` data without
needing to change the `Transform` of an entity. For example, one might
want to spawn a circle mesh facing up instead of facing Z, or to spawn a
mesh slightly offset without needing child entities.
## Solution
Add `transform_by` and `transformed_by` methods to `Mesh`. They take a
`Transform` and apply the translation, rotation, and scale to vertex
positions, and the rotation to normals and tangents.
In the `load_gltf` example, with this system:
```rust
fn transform(time: Res<Time>, mut q: Query<&mut Handle<Mesh>>, mut meshes: ResMut<Assets<Mesh>>) {
let sin = 0.0025 * time.elapsed_seconds().sin();
for mesh_handle in &mut q {
if let Some(mesh) = meshes.get_mut(mesh_handle.clone_weak()) {
let transform =
Transform::from_rotation(Quat::from_rotation_y(0.75 * time.delta_seconds()))
.with_scale(Vec3::splat(1.0 + sin));
mesh.transform_by(transform);
}
}
}
```
it looks like this:
https://github.com/bevyengine/bevy/assets/57632562/60432456-6d28-4d06-9c94-2f4148f5acd5
# Objective
My motivation are to resolve some of the issues I describe in this
[PR](https://github.com/bevyengine/bevy/issues/11415):
- not being able to easily mapping entities because the current
EntityMapper requires `&mut World` access
- not being able to create my own `EntityMapper` because some components
(`Parent` or `Children`) do not provide any public way of modifying the
inner entities
This PR makes the `MapEntities` trait accept a generic type that
implements `Mapper` to perform the mapping.
This means we don't need to use `EntityMapper` to perform our mapping,
we can use any type that implements `Mapper`. Basically this change is
very similar to what `serde` does. Instead of specifying directly how to
map entities for a given type, we have 2 distinct steps:
- the user implements `MapEntities` to define how the type will be
traversed and which `Entity`s will be mapped
- the `Mapper` defines how the mapping is actually done
This is similar to the distinction between `Serialize` (`MapEntities`)
and `Serializer` (`Mapper`).
This allows networking library to map entities without having to use the
existing `EntityMapper` (which requires `&mut World` access and the use
of `world_scope()`)
## Migration Guide
- The existing `EntityMapper` (notably used to replicate `Scenes` across
different `World`s) has been renamed to `SceneEntityMapper`
- The `MapEntities` trait now works with a generic `EntityMapper`
instead of the specific struct `EntityMapper`.
Calls to `fn map_entities(&mut self, entity_mapper: &mut EntityMapper)`
need to be updated to
`fn map_entities<M: EntityMapper>(&mut self, entity_mapper: &mut M)`
- The new trait `EntityMapper` has been added to the prelude
---------
Co-authored-by: Charles Bournhonesque <cbournhonesque@snapchat.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: UkoeHB <37489173+UkoeHB@users.noreply.github.com>
# Objective
allow automatic fixing of bad joint weights.
fix#10447
## Solution
- remove automatic normalization of vertexes with all zero joint
weights.
- add `Mesh::normalize_joint_weights` which fixes zero joint weights,
and also ensures that all weights sum to 1. this is a manual call as it
may be slow to apply to large skinned meshes, and is unnecessary if you
have control over the source assets.
note: this became a more significant problem with 0.12, as weights that
are close to, but not exactly 1 now seem to use `Vec3::ZERO` for the
unspecified weight, where previously they used the entity translation.
# Objective
After #10520, I was experiencing seriously degraded performance that
ended up being due to never-drained `AssetEvent` events causing havoc
inside `extract_render_asset::<A>`. The same events being read over and
over again meant the same assets were being prepared every frame for
eternity. For what it's worth, I was noticing this on a static scene
about every 3rd or so time running my project.
* References #10520
* Fixes#11240
Why these events aren't sometimes drained between frames is beyond me
and perhaps worthy of another investigation, but the approach in this PR
effectively restores the original cached `EventReader` behavior (which
fixes it).
## Solution
I followed the [`CachedSystemState`
example](3a666cab23/crates/bevy_ecs/src/system/function_system.rs (L155))
to make sure that the `EventReader` state is cached between frames like
it used to be when it was an argument of `extract_render_asset::<A>`.
# Objective
Keep core dependencies up to date.
## Solution
Update the dependencies.
wgpu 0.19 only supports raw-window-handle (rwh) 0.6, so bumping that was
included in this.
The rwh 0.6 version bump is just the simplest way of doing it. There
might be a way we can take advantage of wgpu's new safe surface creation
api, but I'm not familiar enough with bevy's window management to
untangle it and my attempt ended up being a mess of lifetimes and rustc
complaining about missing trait impls (that were implemented). Thanks to
@MiniaczQ for the (much simpler) rwh 0.6 version bump code.
Unblocks https://github.com/bevyengine/bevy/pull/9172 and
https://github.com/bevyengine/bevy/pull/10812
~~This might be blocked on cpal and oboe updating their ndk versions to
0.8, as they both currently target ndk 0.7 which uses rwh 0.5.2~~ Tested
on android, and everything seems to work correctly (audio properly stops
when minimized, and plays when re-focusing the app).
---
## Changelog
- `wgpu` has been updated to 0.19! The long awaited arcanization has
been merged (for more info, see
https://gfx-rs.github.io/2023/11/24/arcanization.html), and Vulkan
should now be working again on Intel GPUs.
- Targeting WebGPU now requires that you add the new `webgpu` feature
(setting the `RUSTFLAGS` environment variable to
`--cfg=web_sys_unstable_apis` is still required). This feature currently
overrides the `webgl2` feature if you have both enabled (the `webgl2`
feature is enabled by default), so it is not recommended to add it as a
default feature to libraries without putting it behind a flag that
allows library users to opt out of it! In the future we plan on
supporting wasm binaries that can target both webgl2 and webgpu now that
wgpu added support for doing so (see
https://github.com/bevyengine/bevy/issues/11505).
- `raw-window-handle` has been updated to version 0.6.
## Migration Guide
- `bevy_render::instance_index::get_instance_index()` has been removed
as the webgl2 workaround is no longer required as it was fixed upstream
in wgpu. The `BASE_INSTANCE_WORKAROUND` shaderdef has also been removed.
- WebGPU now requires the new `webgpu` feature to be enabled. The
`webgpu` feature currently overrides the `webgl2` feature so you no
longer need to disable all default features and re-add them all when
targeting `webgpu`, but binaries built with both the `webgpu` and
`webgl2` features will only target the webgpu backend, and will only
work on browsers that support WebGPU.
- Places where you conditionally compiled things for webgl2 need to be
updated because of this change, eg:
- `#[cfg(any(not(feature = "webgl"), not(target_arch = "wasm32")))]`
becomes `#[cfg(any(not(feature = "webgl") ,not(target_arch = "wasm32"),
feature = "webgpu"))]`
- `#[cfg(all(feature = "webgl", target_arch = "wasm32"))]` becomes
`#[cfg(all(feature = "webgl", target_arch = "wasm32", not(feature =
"webgpu")))]`
- `if cfg!(all(feature = "webgl", target_arch = "wasm32"))` becomes `if
cfg!(all(feature = "webgl", target_arch = "wasm32", not(feature =
"webgpu")))`
- `create_texture_with_data` now also takes a `TextureDataOrder`. You
can probably just set this to `TextureDataOrder::default()`
- `TextureFormat`'s `block_size` has been renamed to `block_copy_size`
- See the `wgpu` changelog for anything I might've missed:
https://github.com/gfx-rs/wgpu/blob/trunk/CHANGELOG.md
---------
Co-authored-by: François <mockersf@gmail.com>
Updates the requirements on
[ruzstd](https://github.com/KillingSpark/zstd-rs) to permit the latest
version.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/KillingSpark/zstd-rs/releases">ruzstd's
releases</a>.</em></p>
<blockquote>
<h2>Even better no_std</h2>
<p>Switching from thiserror to derive_more allows for no_std builds on
stable rust</p>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/KillingSpark/zstd-rs/blob/master/Changelog.md">ruzstd's
changelog</a>.</em></p>
<blockquote>
<h1>After 0.5.0</h1>
<ul>
<li>Make the hashing checksum optional (thanks to <a
href="https://github.com/tamird"><code>@tamird</code></a>)
<ul>
<li>breaking change as the public API changes based on features</li>
</ul>
</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="e620d2a856"><code>e620d2a</code></a>
Merge pull request <a
href="https://redirect.github.com/KillingSpark/zstd-rs/issues/50">#50</a>
from KillingSpark/remove_thiserror</li>
<li><a
href="9e9d204c63"><code>9e9d204</code></a>
make clippy happy</li>
<li><a
href="f4a6fc0cc1"><code>f4a6fc0</code></a>
bump the version, this is an incompatible change</li>
<li><a
href="64d65b5c4f"><code>64d65b5</code></a>
fix test compile...</li>
<li><a
href="07bbda98c8"><code>07bbda9</code></a>
remove the error_in_core feature and switch the io_nostd to use the
Display t...</li>
<li><a
href="e15eb1e568"><code>e15eb1e</code></a>
Merge pull request <a
href="https://redirect.github.com/KillingSpark/zstd-rs/issues/49">#49</a>
from tamird/clippy</li>
<li><a
href="92a3f2e6b2"><code>92a3f2e</code></a>
Avoid unnecessary cast</li>
<li><a
href="f588d5c362"><code>f588d5c</code></a>
Avoid slow zero-filling initialization</li>
<li><a
href="e79f09876f"><code>e79f098</code></a>
Avoid single-match expression</li>
<li><a
href="c75cc2fbb9"><code>c75cc2f</code></a>
Remove useless assertion</li>
<li>Additional commits viewable in <a
href="https://github.com/KillingSpark/zstd-rs/compare/v0.4.0...v0.5.0">compare
view</a></li>
</ul>
</details>
<br />
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Objective
- Prep for https://github.com/bevyengine/bevy/pull/10164
- Make deferred_lighting_pass_id a ColorAttachment
- Correctly extract shadow view frusta so that the view uniforms get
populated
- Make some needed things public
- Misc formatting
# Objective
> Can anyone explain to me the reasoning of renaming all the types named
Query to Data. I'm talking about this PR
https://github.com/bevyengine/bevy/pull/10779 It doesn't make sense to
me that a bunch of types that are used to run queries aren't named Query
anymore. Like ViewQuery on the ViewNode is the type of the Query. I
don't really understand the point of the rename, it just seems like it
hides the fact that a query will run based on those types.
[@IceSentry](https://discord.com/channels/691052431525675048/692572690833473578/1184946251431694387)
## Solution
Revert several renames in #10779.
## Changelog
- `ViewNode::ViewData` is now `ViewNode::ViewQuery` again.
## Migration Guide
- This PR amends the migration guide in
https://github.com/bevyengine/bevy/pull/10779
---------
Co-authored-by: atlas dostal <rodol@rivalrebels.com>
# Objective
- Add the ability to describe storage texture bindings when deriving
`AsBindGroup`.
- This is especially valuable for the compute story of bevy which
deserves some extra love imo.
## Solution
- This add the ability to annotate struct fields with a
`#[storage_texture(0)]` annotation.
- Instead of adding specific option parsing for all the image formats
and access modes, I simply accept a token stream and defer checking to
see if the option is valid to the compiler. This still results in useful
and friendly errors and is free to maintain and always compatible with
wgpu changes.
---
## Changelog
- The `#[storage_texture(..)]` annotation is now accepted for fields of
`Handle<Image>` in structs that derive `AsBindGroup`.
- The game_of_life compute shader example has been updated to use
`AsBindGroup` together with `[storage_texture(..)]` to obtain the
`BindGroupLayout`.
## Migration Guide
# Objective
- since #9685 ,bevy introduce automatic batching of draw commands,
- `batch_and_prepare_render_phase` take the responsibility for batching
`phaseItem`,
- `GetBatchData` trait is used for indentify each phaseitem how to
batch. it defines a associated type `Data `used for Query to fetch data
from world.
- however,the impl of `GetBatchData ` in bevy always set ` type
Data=Entity` then we acually get following code
`let entity:Entity =query.get(item.entity())` that cause unnecessary
overhead .
## Solution
- remove associated type `Data ` and `Filter` from `GetBatchData `,
- change the type of the `query_item ` parameter in get_batch_data from`
Self::Data` to `Entity`.
- `batch_and_prepare_render_phase ` no longer takes a query using
`F::Data, F::Filter`
- `get_batch_data `now returns `Option<(Self::BufferData,
Option<Self::CompareData>)>`
---
## Performance
based in main merged with #11290
Window 11 ,Intel 13400kf, NV 4070Ti
frame time from 3.34ms to 3 ms, ~ 10%
`batch_and_prepare_render_phase` from 800us ~ 400 us
## Migration Guide
trait `GetBatchData` no longer hold associated type `Data `and `Filter`
`get_batch_data` `query_item `type from `Self::Data` to `Entity` and
return `Option<(Self::BufferData, Option<Self::CompareData>)>`
`batch_and_prepare_render_phase` should not have a query
This pull request re-submits #10057, which was backed out for breaking
macOS, iOS, and Android. I've tested this version on macOS and Android
and on the iOS simulator.
# Objective
This pull request implements *reflection probes*, which generalize
environment maps to allow for multiple environment maps in the same
scene, each of which has an axis-aligned bounding box. This is a
standard feature of physically-based renderers and was inspired by [the
corresponding feature in Blender's Eevee renderer].
## Solution
This is a minimal implementation of reflection probes that allows
artists to define cuboid bounding regions associated with environment
maps. For every view, on every frame, a system builds up a list of the
nearest 4 reflection probes that are within the view's frustum and
supplies that list to the shader. The PBR fragment shader searches
through the list, finds the first containing reflection probe, and uses
it for indirect lighting, falling back to the view's environment map if
none is found. Both forward and deferred renderers are fully supported.
A reflection probe is an entity with a pair of components, *LightProbe*
and *EnvironmentMapLight* (as well as the standard *SpatialBundle*, to
position it in the world). The *LightProbe* component (along with the
*Transform*) defines the bounding region, while the
*EnvironmentMapLight* component specifies the associated diffuse and
specular cubemaps.
A frequent question is "why two components instead of just one?" The
advantages of this setup are:
1. It's readily extensible to other types of light probes, in particular
*irradiance volumes* (also known as ambient cubes or voxel global
illumination), which use the same approach of bounding cuboids. With a
single component that applies to both reflection probes and irradiance
volumes, we can share the logic that implements falloff and blending
between multiple light probes between both of those features.
2. It reduces duplication between the existing *EnvironmentMapLight* and
these new reflection probes. Systems can treat environment maps attached
to cameras the same way they treat environment maps applied to
reflection probes if they wish.
Internally, we gather up all environment maps in the scene and place
them in a cubemap array. At present, this means that all environment
maps must have the same size, mipmap count, and texture format. A
warning is emitted if this restriction is violated. We could potentially
relax this in the future as part of the automatic mipmap generation
work, which could easily do texture format conversion as part of its
preprocessing.
An easy way to generate reflection probe cubemaps is to bake them in
Blender and use the `export-blender-gi` tool that's part of the
[`bevy-baked-gi`] project. This tool takes a `.blend` file containing
baked cubemaps as input and exports cubemap images, pre-filtered with an
embedded fork of the [glTF IBL Sampler], alongside a corresponding
`.scn.ron` file that the scene spawner can use to recreate the
reflection probes.
Note that this is intentionally a minimal implementation, to aid
reviewability. Known issues are:
* Reflection probes are basically unsupported on WebGL 2, because WebGL
2 has no cubemap arrays. (Strictly speaking, you can have precisely one
reflection probe in the scene if you have no other cubemaps anywhere,
but this isn't very useful.)
* Reflection probes have no falloff, so reflections will abruptly change
when objects move from one bounding region to another.
* As mentioned before, all cubemaps in the world of a given type
(diffuse or specular) must have the same size, format, and mipmap count.
Future work includes:
* Blending between multiple reflection probes.
* A falloff/fade-out region so that reflected objects disappear
gradually instead of vanishing all at once.
* Irradiance volumes for voxel-based global illumination. This should
reuse much of the reflection probe logic, as they're both GI techniques
based on cuboid bounding regions.
* Support for WebGL 2, by breaking batches when reflection probes are
used.
These issues notwithstanding, I think it's best to land this with
roughly the current set of functionality, because this patch is useful
as is and adding everything above would make the pull request
significantly larger and harder to review.
---
## Changelog
### Added
* A new *LightProbe* component is available that specifies a bounding
region that an *EnvironmentMapLight* applies to. The combination of a
*LightProbe* and an *EnvironmentMapLight* offers *reflection probe*
functionality similar to that available in other engines.
[the corresponding feature in Blender's Eevee renderer]:
https://docs.blender.org/manual/en/latest/render/eevee/light_probes/reflection_cubemaps.html
[`bevy-baked-gi`]: https://github.com/pcwalton/bevy-baked-gi
[glTF IBL Sampler]: https://github.com/KhronosGroup/glTF-IBL-Sampler
# Objective
- Some users want to change the default texture usage of the main camera
but they are currently hardcoded
## Solution
- Add a component that is used to configure the main texture usage field
---
## Changelog
Added `CameraMainTextureUsage`
Added `CameraMainTextureUsage` to `Camera3dBundle` and `Camera2dBundle`
## Migration Guide
Add `main_texture_usages: Default::default()` to your camera bundle.
# Notes
Inspired by: #6815
# Objective
- `DynamicUniformBuffer::push` takes an owned `T` but only uses a shared
reference to it
- This in turn requires users of `DynamicUniformBuffer::push` to
potentially unecessarily clone data
## Solution
- Have `DynamicUniformBuffer::push` take a shared reference to `T`
---
## Changelog
- `DynamicUniformBuffer::push` now takes a `&T` instead of `T`
## Migration Guide
- Users of `DynamicUniformBuffer::push` now need to pass references to
`DynamicUniformBuffer::push` (e.g. existing `uniforms.push(value)` will
now become `uniforms.push(&value)`)
Rebased and finished version of
https://github.com/bevyengine/bevy/pull/8407. Huge thanks to @GitGhillie
for adjusting all the examples, and the many other people who helped
write this PR (@superdump , @coreh , among others) :)
Fixes https://github.com/bevyengine/bevy/issues/8369
---
## Changelog
- Added a `brightness` control to `Skybox`.
- Added an `intensity` control to `EnvironmentMapLight`.
- Added `ExposureSettings` and `PhysicalCameraParameters` for
controlling exposure of 3D cameras.
- Removed the baked-in `DirectionalLight` exposure Bevy previously
hardcoded internally.
## Migration Guide
- If using a `Skybox` or `EnvironmentMapLight`, use the new `brightness`
and `intensity` controls to adjust their strength.
- All 3D scene will now have different apparent brightnesses due to Bevy
implementing proper exposure controls. You will have to adjust the
intensity of your lights and/or your camera exposure via the new
`ExposureSettings` component to compensate.
---------
Co-authored-by: Robert Swain <robert.swain@gmail.com>
Co-authored-by: GitGhillie <jillisnoordhoek@gmail.com>
Co-authored-by: Marco Buono <thecoreh@gmail.com>
Co-authored-by: vero <email@atlasdostal.com>
Co-authored-by: atlas dostal <rodol@rivalrebels.com>
# Objective
Add support for presenting each UI tree on a specific window and
viewport, while making as few breaking changes as possible.
This PR is meant to resolve the following issues at once, since they're
all related.
- Fixes#5622
- Fixes#5570
- Fixes#5621
Adopted #5892 , but started over since the current codebase diverged
significantly from the original PR branch. Also, I made a decision to
propagate component to children instead of recursively iterating over
nodes in search for the root.
## Solution
Add a new optional component that can be inserted to UI root nodes and
propagate to children to specify which camera it should render onto.
This is then used to get the render target and the viewport for that UI
tree. Since this component is optional, the default behavior should be
to render onto the single camera (if only one exist) and warn of
ambiguity if multiple cameras exist. This reduces the complexity for
users with just one camera, while giving control in contexts where it
matters.
## Changelog
- Adds `TargetCamera(Entity)` component to specify which camera should a
node tree be rendered into. If only one camera exists, this component is
optional.
- Adds an example of rendering UI to a texture and using it as a
material in a 3D world.
- Fixes recalculation of physical viewport size when target scale factor
changes. This can happen when the window is moved between displays with
different DPI.
- Changes examples to demonstrate assigning UI to different viewports
and windows and make interactions in an offset viewport testable.
- Removes `UiCameraConfig`. UI visibility now can be controlled via
combination of explicit `TargetCamera` and `Visibility` on the root
nodes.
---------
Co-authored-by: davier <bricedavier@gmail.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Alice Cecile <alice.i.cecil@gmail.com>
# Objective
- Update async channel to v2.
## Solution
- async channel doesn't support `send_blocking` on wasm anymore. So
don't compile the pipelined rendering plugin on wasm anymore.
- Replaces https://github.com/bevyengine/bevy/pull/10405
## Migration Guide
- The `PipelinedRendering` plugin is no longer exported on wasm. If you
are including it in your wasm builds you should remove it.
```rust
#[cfg(all(not(target_arch = "wasm32"))]
app.add_plugins(bevy_render::pipelined_rendering::PipelinedRenderingPlugin);
```
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Issue #10243: rendering multiple triangles in the same place results in
flickering.
## Solution
Considered these alternatives:
- `depth_bias` may not work, because of high number of entities, so
creating a material per entity is practically not possible
- rendering at slightly different positions does not work, because when
camera is far, float rounding causes the same issues (edit: assuming we
have to use the same `depth_bias`)
- considered implementing deterministic operation like
`query.par_iter().flat_map(...).collect()` to be used in
`check_visibility` system (which would solve the issue since query is
deterministic), and could not figure out how to make it as cheap as
current approach with thread-local collectors (#11249)
So adding an option to sort entities after `check_visibility` system
run.
Should not be too bad, because after visibility check, only a handful
entities remain.
This is probably not the only source of non-determinism in Bevy, but
this is one I could find so far. At least it fixes the repro example.
## Changelog
- `DeterministicRenderingConfig` option to enable deterministic
rendering
## Test
<img width="1392" alt="image"
src="https://github.com/bevyengine/bevy/assets/28969/c735bce1-3a71-44cd-8677-c19f6c0ee6bd">
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Update to `glam` 0.25, `encase` 0.7 and `hexasphere` to 10.0
## Changelog
Added the `FloatExt` trait to the `bevy_math` prelude which adds `lerp`,
`inverse_lerp` and `remap` methods to the `f32` and `f64` types.
# Objective
This pull request implements *reflection probes*, which generalize
environment maps to allow for multiple environment maps in the same
scene, each of which has an axis-aligned bounding box. This is a
standard feature of physically-based renderers and was inspired by [the
corresponding feature in Blender's Eevee renderer].
## Solution
This is a minimal implementation of reflection probes that allows
artists to define cuboid bounding regions associated with environment
maps. For every view, on every frame, a system builds up a list of the
nearest 4 reflection probes that are within the view's frustum and
supplies that list to the shader. The PBR fragment shader searches
through the list, finds the first containing reflection probe, and uses
it for indirect lighting, falling back to the view's environment map if
none is found. Both forward and deferred renderers are fully supported.
A reflection probe is an entity with a pair of components, *LightProbe*
and *EnvironmentMapLight* (as well as the standard *SpatialBundle*, to
position it in the world). The *LightProbe* component (along with the
*Transform*) defines the bounding region, while the
*EnvironmentMapLight* component specifies the associated diffuse and
specular cubemaps.
A frequent question is "why two components instead of just one?" The
advantages of this setup are:
1. It's readily extensible to other types of light probes, in particular
*irradiance volumes* (also known as ambient cubes or voxel global
illumination), which use the same approach of bounding cuboids. With a
single component that applies to both reflection probes and irradiance
volumes, we can share the logic that implements falloff and blending
between multiple light probes between both of those features.
2. It reduces duplication between the existing *EnvironmentMapLight* and
these new reflection probes. Systems can treat environment maps attached
to cameras the same way they treat environment maps applied to
reflection probes if they wish.
Internally, we gather up all environment maps in the scene and place
them in a cubemap array. At present, this means that all environment
maps must have the same size, mipmap count, and texture format. A
warning is emitted if this restriction is violated. We could potentially
relax this in the future as part of the automatic mipmap generation
work, which could easily do texture format conversion as part of its
preprocessing.
An easy way to generate reflection probe cubemaps is to bake them in
Blender and use the `export-blender-gi` tool that's part of the
[`bevy-baked-gi`] project. This tool takes a `.blend` file containing
baked cubemaps as input and exports cubemap images, pre-filtered with an
embedded fork of the [glTF IBL Sampler], alongside a corresponding
`.scn.ron` file that the scene spawner can use to recreate the
reflection probes.
Note that this is intentionally a minimal implementation, to aid
reviewability. Known issues are:
* Reflection probes are basically unsupported on WebGL 2, because WebGL
2 has no cubemap arrays. (Strictly speaking, you can have precisely one
reflection probe in the scene if you have no other cubemaps anywhere,
but this isn't very useful.)
* Reflection probes have no falloff, so reflections will abruptly change
when objects move from one bounding region to another.
* As mentioned before, all cubemaps in the world of a given type
(diffuse or specular) must have the same size, format, and mipmap count.
Future work includes:
* Blending between multiple reflection probes.
* A falloff/fade-out region so that reflected objects disappear
gradually instead of vanishing all at once.
* Irradiance volumes for voxel-based global illumination. This should
reuse much of the reflection probe logic, as they're both GI techniques
based on cuboid bounding regions.
* Support for WebGL 2, by breaking batches when reflection probes are
used.
These issues notwithstanding, I think it's best to land this with
roughly the current set of functionality, because this patch is useful
as is and adding everything above would make the pull request
significantly larger and harder to review.
---
## Changelog
### Added
* A new *LightProbe* component is available that specifies a bounding
region that an *EnvironmentMapLight* applies to. The combination of a
*LightProbe* and an *EnvironmentMapLight* offers *reflection probe*
functionality similar to that available in other engines.
[the corresponding feature in Blender's Eevee renderer]:
https://docs.blender.org/manual/en/latest/render/eevee/light_probes/reflection_cubemaps.html
[`bevy-baked-gi`]: https://github.com/pcwalton/bevy-baked-gi
[glTF IBL Sampler]: https://github.com/KhronosGroup/glTF-IBL-Sampler
# Objective
- Since #10702, the way bevy updates the window leads to major slowdowns
as seen in
- #11122
- #11220
- Slow is bad, furthermore, _very_ slow is _very_ bad. We should fix
this issue.
## Solution
- Move the app update code into the `Event::WindowEvent { event:
WindowEvent::RedrawRequested }` branch of the event loop.
- Run `window.request_redraw()` When `runner_state.redraw_requested`
- Instead of swapping `ControlFlow` between `Poll` and `Wait`, we always
keep it at `Wait`, and use `window.request_redraw()` to schedule an
immediate call to the event loop.
- `runner_state.redraw_requested` is set to `true` when
`UpdateMode::Continuous` and when a `RequestRedraw` event is received.
- Extract the redraw code into a separate function, because otherwise
I'd go crazy with the indentation level.
- Fix#11122.
## Testing
I tested the WASM builds as follow:
```sh
cargo run -p build-wasm-example -- --api webgl2 bevymark
python -m http.server --directory examples/wasm/ 8080
# Open browser at http://localhost:8080
```
On main, even spawning a couple sprites is super choppy. Even if it says
"300 FPS". While on this branch, it is smooth as butter.
I also found that it fixes all choppiness on window resize (tested on
Linux/X11). This was another issue from #10702 IIRC.
So here is what I tested:
- On `wasm`: `many_foxes` and `bevymark`, with `argh::from_env()`
commented out, otherwise we get a cryptic error.
- Both with `PresentMode::AutoVsync` and `PresentMode::AutoNoVsync`
- On main, it is consistently choppy.
- With this PR, the visible frame rate is consistent with the diagnostic
numbers
- On native (linux/x11) I ran similar tests, making sure that
`AutoVsync` limits to monitor framerate, and `AutoNoVsync` doesn't.
## Future work
Code could be improved, I wanted a quick solution easy to review, but we
really need to make the code more accessible.
- #9768
- ~~**`WinitSettings::desktop_app()` is completely borked.**~~ actually
broken on main as well
### Review guide
Consider enable the non-whitespace diff to see the _real_ change set.
# Objective
- Since #10520, assets are unloaded from RAM by default. This breaks a
number of scenario:
- using `load_folder`
- loading a gltf, then going through its mesh to transform them /
compute a collider / ...
- any assets/subassets scenario should be `Keep` as you can't know what
the user will do with the assets
- android suspension, where GPU memory is unloaded
- Alternative to #11202
## Solution
- Keep assets on CPU memory by default
# Objective
In my code I use a lot of images as render targets.
I'd like some convenience methods for working with this type.
## Solution
- Allow `.into()` to construct a `RenderTarget`
- Add `.as_image()`
---
## Changelog
### Added
- `RenderTarget` can be constructed via `.into()` on a `Handle<Image>`
- `RenderTarget` new method: `as_image`
---------
Signed-off-by: Torstein Grindvik <torstein.grindvik@muybridge.com>
Co-authored-by: Torstein Grindvik <torstein.grindvik@muybridge.com>
# Objective
- No point in keeping Meshes/Images in RAM once they're going to be sent
to the GPU, and kept in VRAM. This saves a _significant_ amount of
memory (several GBs) on scenes like bistro.
- References
- https://github.com/bevyengine/bevy/pull/1782
- https://github.com/bevyengine/bevy/pull/8624
## Solution
- Augment RenderAsset with the capability to unload the underlying asset
after extracting to the render world.
- Mesh/Image now have a cpu_persistent_access field. If this field is
RenderAssetPersistencePolicy::Unload, the asset will be unloaded from
Assets<T>.
- A new AssetEvent is sent upon dropping the last strong handle for the
asset, which signals to the RenderAsset to remove the GPU version of the
asset.
---
## Changelog
- Added `AssetEvent::NoLongerUsed` and
`AssetEvent::is_no_longer_used()`. This event is sent when the last
strong handle of an asset is dropped.
- Rewrote the API for `RenderAsset` to allow for unloading the asset
data from the CPU.
- Added `RenderAssetPersistencePolicy`.
- Added `Mesh::cpu_persistent_access` for memory savings when the asset
is not needed except for on the GPU.
- Added `Image::cpu_persistent_access` for memory savings when the asset
is not needed except for on the GPU.
- Added `ImageLoaderSettings::cpu_persistent_access`.
- Added `ExrTextureLoaderSettings`.
- Added `HdrTextureLoaderSettings`.
## Migration Guide
- Asset loaders (GLTF, etc) now load meshes and textures without
`cpu_persistent_access`. These assets will be removed from
`Assets<Mesh>` and `Assets<Image>` once `RenderAssets<Mesh>` and
`RenderAssets<Image>` contain the GPU versions of these assets, in order
to reduce memory usage. If you require access to the asset data from the
CPU in future frames after the GLTF asset has been loaded, modify all
dependent `Mesh` and `Image` assets and set `cpu_persistent_access` to
`RenderAssetPersistencePolicy::Keep`.
- `Mesh` now requires a new `cpu_persistent_access` field. Set it to
`RenderAssetPersistencePolicy::Keep` to mimic the previous behavior.
- `Image` now requires a new `cpu_persistent_access` field. Set it to
`RenderAssetPersistencePolicy::Keep` to mimic the previous behavior.
- `MorphTargetImage::new()` now requires a new `cpu_persistent_access`
parameter. Set it to `RenderAssetPersistencePolicy::Keep` to mimic the
previous behavior.
- `DynamicTextureAtlasBuilder::add_texture()` now requires that the
`TextureAtlas` you pass has an `Image` with `cpu_persistent_access:
RenderAssetPersistencePolicy::Keep`. Ensure you construct the image
properly for the texture atlas.
- The `RenderAsset` trait has significantly changed, and requires
adapting your existing implementations.
- The trait now requires `Clone`.
- The `ExtractedAsset` associated type has been removed (the type itself
is now extracted).
- The signature of `prepare_asset()` is slightly different
- A new `persistence_policy()` method is now required (return
RenderAssetPersistencePolicy::Unload to match the previous behavior).
- Match on the new `NoLongerUsed` variant for exhaustive matches of
`AssetEvent`.
# Objective
There are a lot of doctests that are `ignore`d for no documented reason.
And that should be fixed.
## Solution
I searched the bevy repo with the regex ` ```[a-z,]*ignore ` in order to
find all `ignore`d doctests. For each one of the `ignore`d doctests, I
did the following steps:
1. Attempt to remove the `ignored` attribute while still passing the
test. I did this by adding hidden dummy structs and imports.
2. If step 1 doesn't work, attempt to replace the `ignored` attribute
with the `no_run` attribute while still passing the test.
3. If step 2 doesn't work, keep the `ignored` attribute but add
documentation for why the `ignored` attribute was added.
---------
Co-authored-by: François <mockersf@gmail.com>
# Objective
- Custom render passes, or future passes in the engine (such as
https://github.com/bevyengine/bevy/pull/10164) need a better way to know
and indicate to the core passes whether the view color/depth/prepass
attachments have been cleared or not yet this frame, to know if they
should clear it themselves or load it.
## Solution
- For all render targets (depth textures, shadow textures, prepass
textures, main textures) use an atomic bool to track whether or not each
texture has been cleared this frame. Abstracted away in the new
ColorAttachment and DepthAttachment wrappers.
---
## Changelog
- Changed `ViewTarget::get_color_attachment()`, removed arguments.
- Changed `ViewTarget::get_unsampled_color_attachment()`, removed
arguments.
- Removed `Camera3d::clear_color`.
- Removed `Camera2d::clear_color`.
- Added `Camera::clear_color`.
- Added `ExtractedCamera::clear_color`.
- Added `ColorAttachment` and `DepthAttachment` wrappers.
- Moved `ClearColor` and `ClearColorConfig` from
`bevy::core_pipeline::clear_color` to `bevy::render::camera`.
- Core render passes now track when a texture is first bound as an
attachment in order to decide whether to clear or load it.
## Migration Guide
- Remove arguments to `ViewTarget::get_color_attachment()` and
`ViewTarget::get_unsampled_color_attachment()`.
- Configure clear color on `Camera` instead of on `Camera3d` and
`Camera2d`.
- Moved `ClearColor` and `ClearColorConfig` from
`bevy::core_pipeline::clear_color` to `bevy::render::camera`.
- `ViewDepthTexture` must now be created via the `new()` method
---------
Co-authored-by: vero <email@atlasdostal.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Make the implementation order consistent between all sources to fit
the order in the trait.
## Solution
- Change the implementation order.
Matches versioning & features from other Cargo.toml files in the
project.
# Objective
Resolves#10932
## Solution
Added smallvec to the bevy_utils cargo.toml and added a line to
re-export the crate. Target version and features set to match what's
used in the other bevy crates.
The error conditions were not documented, this requires the user to
inspect the source code to know when to expect a `None`.
Error conditions should always be documented, so we document them.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Fix an inconsistency in the calculation of aspect ratio's.
- Fixes#10288
## Solution
- Created an intermediate `AspectRatio` struct, as suggested in the
issue. This is currently just used in any places where aspect ratio
calculations happen, to prevent doing it wrong. In my and @mamekoro 's
opinion, it would be better if this was used instead of a normal `f32`
in various places, but I didn't want to make too many changes to begin
with.
## Migration Guide
- Anywhere where you are currently expecting a f32 when getting aspect
ratios, you will now receive a `AspectRatio` struct. this still holds
the same value.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Users are often confused when their command effects are not visible in
the next system. This PR auto inserts sync points if there are deferred
buffers on a system and there are dependents on that system (systems
with after relationships).
- Manual sync points can lead to users adding more than needed and it's
hard for the user to have a global understanding of their system graph
to know which sync points can be merged. However we can easily calculate
which sync points can be merged automatically.
## Solution
1. Add new edge types to allow opting out of new behavior
2. Insert an sync point for each edge whose initial node has deferred
system params.
3. Reuse nodes if they're at the number of sync points away.
* add opt outs for specific edges with `after_ignore_deferred`,
`before_ignore_deferred` and `chain_ignore_deferred`. The
`auto_insert_apply_deferred` boolean on `ScheduleBuildSettings` can be
set to false to opt out for the whole schedule.
## Perf
This has a small negative effect on schedule build times.
```text
group auto-sync main-for-auto-sync
----- ----------- ------------------
build_schedule/1000_schedule 1.06 2.8±0.15s ? ?/sec 1.00 2.7±0.06s ? ?/sec
build_schedule/1000_schedule_noconstraints 1.01 26.2±0.88ms ? ?/sec 1.00 25.8±0.36ms ? ?/sec
build_schedule/100_schedule 1.02 13.1±0.33ms ? ?/sec 1.00 12.9±0.28ms ? ?/sec
build_schedule/100_schedule_noconstraints 1.08 505.3±29.30µs ? ?/sec 1.00 469.4±12.48µs ? ?/sec
build_schedule/500_schedule 1.00 485.5±6.29ms ? ?/sec 1.00 485.5±9.80ms ? ?/sec
build_schedule/500_schedule_noconstraints 1.00 6.8±0.10ms ? ?/sec 1.02 6.9±0.16ms ? ?/sec
```
---
## Changelog
- Auto insert sync points and added `after_ignore_deferred`,
`before_ignore_deferred`, `chain_no_deferred` and
`auto_insert_apply_deferred` APIs to opt out of this behavior
## Migration Guide
- `apply_deferred` points are added automatically when there is ordering
relationship with a system that has deferred parameters like `Commands`.
If you want to opt out of this you can switch from `after`, `before`,
and `chain` to the corresponding `ignore_deferred` API,
`after_ignore_deferred`, `before_ignore_deferred` or
`chain_ignore_deferred` for your system/set ordering.
- You can also set `ScheduleBuildSettings::auto_insert_sync_points` to
`false` if you want to do it for the whole schedule. Note that in this
mode you can still add `apply_deferred` points manually.
- For most manual insertions of `apply_deferred` you should remove them
as they cannot be merged with the automatically inserted points and
might reduce parallelizability of the system graph.
## TODO
- [x] remove any apply_deferred used in the engine
- [x] ~~decide if we should deprecate manually using apply_deferred.~~
We'll still allow inserting manual sync points for now for whatever edge
cases users might have.
- [x] Update migration guide
- [x] rerun schedule build benchmarks
---------
Co-authored-by: Joseph <21144246+JoJoJet@users.noreply.github.com>
# Objective
- Finish the work done in #8942 .
## Solution
- Rebase the changes made in #8942 and fix the issues stopping it from
being merged earlier
---------
Co-authored-by: Thomas <1234328+thmsgntz@users.noreply.github.com>
# Objective
Keep up to date with wgpu.
## Solution
Update the wgpu version.
Currently blocked on naga_oil updating to naga 0.14 and releasing a new
version.
3d scenes (or maybe any scene with lighting?) currently don't render
anything due to
```
error: naga_oil bug, please file a report: composer failed to build a valid header: Type [2] '' is invalid
= Capability Capabilities(CUBE_ARRAY_TEXTURES) is required
```
I'm not sure what should be passed in for `wgpu::InstanceFlags`, or if we want to make the gles3minorversion configurable (might be useful for debugging?)
Currently blocked on https://github.com/bevyengine/naga_oil/pull/63, and https://github.com/gfx-rs/wgpu/issues/4569 to be fixed upstream in wgpu first.
## Known issues
Amd+windows+vulkan has issues with texture_binding_arrays (see the image [here](https://github.com/bevyengine/bevy/pull/10266#issuecomment-1819946278)), but that'll be fixed in the next wgpu/naga version, and you can just use dx12 as a workaround for now (Amd+linux mesa+vulkan texture_binding_arrays are fixed though).
---
## Changelog
Updated wgpu to 0.18, naga to 0.14.2, and naga_oil to 0.11.
- Windows desktop GL should now be less painful as it no longer requires Angle.
- You can now toggle shader validation and debug information for debug and release builds using `WgpuSettings.instance_flags` and [InstanceFlags](https://docs.rs/wgpu/0.18.0/wgpu/struct.InstanceFlags.html)
## Migration Guide
- `RenderPassDescriptor` `color_attachments` (as well as `RenderPassColorAttachment`, and `RenderPassDepthStencilAttachment`) now use `StoreOp::Store` or `StoreOp::Discard` instead of a `boolean` to declare whether or not they should be stored.
- `RenderPassDescriptor` now have `timestamp_writes` and `occlusion_query_set` fields. These can safely be set to `None`.
- `ComputePassDescriptor` now have a `timestamp_writes` field. This can be set to `None` for now.
- See the [wgpu changelog](https://github.com/gfx-rs/wgpu/blob/trunk/CHANGELOG.md#v0180-2023-10-25) for additional details
I didn't notice minus where vertices are generated, so could not
understand the order there.
Adding a comment to help the next person who is going to understand Bevy
by reading its code.
# Objective
add `RenderLayers` awareness to lights. lights default to
`RenderLayers::layer(0)`, and must intersect the camera entity's
`RenderLayers` in order to affect the camera's output.
note that lights already use renderlayers to filter meshes for shadow
casting. this adds filtering lights per view based on intersection of
camera layers and light layers.
fixes#3462
## Solution
PointLights and SpotLights are assigned to individual views in
`assign_lights_to_clusters`, so we simply cull the lights which don't
match the view layers in that function.
DirectionalLights are global, so we
- add the light layers to the `DirectionalLight` struct
- add the view layers to the `ViewUniform` struct
- check for intersection before processing the light in
`apply_pbr_lighting`
potential issue: when mesh/light layers are smaller than the view layers
weird results can occur. e.g:
camera = layers 1+2
light = layers 1
mesh = layers 2
the mesh does not cast shadows wrt the light as (1 & 2) == 0.
the light affects the view as (1+2 & 1) != 0.
the view renders the mesh as (1+2 & 2) != 0.
so the mesh is rendered and lit, but does not cast a shadow.
this could be fixed (so that the light would not affect the mesh in that
view) by adding the light layers to the point and spot light structs,
but i think the setup is pretty unusual, and space is at a premium in
those structs (adding 4 bytes more would reduce the webgl point+spot
light max count to 240 from 256).
I think typical usage is for cameras to have a single layer, and
meshes/lights to maybe have multiple layers to render to e.g. minimaps
as well as primary views.
if there is a good use case for the above setup and we should support
it, please let me know.
---
## Migration Guide
Lights no longer affect all `RenderLayers` by default, now like cameras
and meshes they default to `RenderLayers::layer(0)`. To recover the
previous behaviour and have all lights affect all views, add a
`RenderLayers::all()` component to the light entity.
# Objective
A better alternative version of #10843.
Currently, Bevy has a single `Ray` struct for 3D. To allow better
interoperability with Bevy's primitive shapes (#10572) and some third
party crates (that handle e.g. spatial queries), it would be very useful
to have separate versions for 2D and 3D respectively.
## Solution
Separate `Ray` into `Ray2d` and `Ray3d`. These new structs also take
advantage of the new primitives by using `Direction2d`/`Direction3d` for
the direction:
```rust
pub struct Ray2d {
pub origin: Vec2,
pub direction: Direction2d,
}
pub struct Ray3d {
pub origin: Vec3,
pub direction: Direction3d,
}
```
and by using `Plane2d`/`Plane3d` in `intersect_plane`:
```rust
impl Ray2d {
// ...
pub fn intersect_plane(&self, plane_origin: Vec2, plane: Plane2d) -> Option<f32> {
// ...
}
}
```
---
## Changelog
### Added
- `Ray2d` and `Ray3d`
- `Ray2d::new` and `Ray3d::new` constructors
- `Plane2d::new` and `Plane3d::new` constructors
### Removed
- Removed `Ray` in favor of `Ray3d`
### Changed
- `direction` is now a `Direction2d`/`Direction3d` instead of a vector,
which provides guaranteed normalization
- `intersect_plane` now takes a `Plane2d`/`Plane3d` instead of just a
vector for the plane normal
- `Direction2d` and `Direction3d` now derive `Serialize` and
`Deserialize` to preserve ray (de)serialization
## Migration Guide
`Ray` has been renamed to `Ray3d`.
### Ray creation
Before:
```rust
Ray {
origin: Vec3::ZERO,
direction: Vec3::new(0.5, 0.6, 0.2).normalize(),
}
```
After:
```rust
// Option 1:
Ray3d {
origin: Vec3::ZERO,
direction: Direction3d::new(Vec3::new(0.5, 0.6, 0.2)).unwrap(),
}
// Option 2:
Ray3d::new(Vec3::ZERO, Vec3::new(0.5, 0.6, 0.2))
```
### Plane intersections
Before:
```rust
let result = ray.intersect_plane(Vec2::X, Vec2::Y);
```
After:
```rust
let result = ray.intersect_plane(Vec2::X, Plane2d::new(Vec2::Y));
```
# Objective
avoid panics from `calculate_bounds` systems if entities are despawned
in PostUpdate.
there's a running general discussion (#10166) about command panicking.
in the meantime we may as well fix up some cases where it's clear a
failure to insert is safe.
## Solution
change `.insert(aabb)` to `.try_insert(aabb)`
# Objective
- Shorten paths by removing unnecessary prefixes
## Solution
- Remove the prefixes from many paths which do not need them. Finding
the paths was done automatically using built-in refactoring tools in
Jetbrains RustRover.
# Objective
- Materials should be a more frequent rebind then meshes (due to being
able to use a single vertex buffer, such as in #10164) and therefore
should be in a higher bind group.
---
## Changelog
- For 2d and 3d mesh/material setups (but not UI materials, or other
rendering setups such as gizmos, sprites, or text), mesh data is now in
bind group 1, and material data is now in bind group 2, which is swapped
from how they were before.
## Migration Guide
- Custom 2d and 3d mesh/material shaders should now use bind group 2
`@group(2) @binding(x)` for their bound resources, instead of bind group
1.
- Many internal pieces of rendering code have changed so that mesh data
is now in bind group 1, and material data is now in bind group 2.
Semi-custom rendering setups (that don't use the Material or Material2d
APIs) should adapt to these changes.
# Objective
Related to #10612.
Enable the
[`clippy::manual_let_else`](https://rust-lang.github.io/rust-clippy/master/#manual_let_else)
lint as a warning. The `let else` form seems more idiomatic to me than a
`match`/`if else` that either match a pattern or diverge, and from the
clippy doc, the lint doesn't seem to have any possible false positive.
## Solution
Add the lint as warning in `Cargo.toml`, refactor places where the lint
triggers.
# Objective
- Follow up to #9694
## Solution
- Same api as #9694 but adapted for `BindGroupLayoutEntry`
- Use the same `ShaderStages` visibilty for all entries by default
- Add `BindingType` helper function that mirror the wgsl equivalent and
that make writing layouts much simpler.
Before:
```rust
let layout = render_device.create_bind_group_layout(&BindGroupLayoutDescriptor {
label: Some("post_process_bind_group_layout"),
entries: &[
BindGroupLayoutEntry {
binding: 0,
visibility: ShaderStages::FRAGMENT,
ty: BindingType::Texture {
sample_type: TextureSampleType::Float { filterable: true },
view_dimension: TextureViewDimension::D2,
multisampled: false,
},
count: None,
},
BindGroupLayoutEntry {
binding: 1,
visibility: ShaderStages::FRAGMENT,
ty: BindingType::Sampler(SamplerBindingType::Filtering),
count: None,
},
BindGroupLayoutEntry {
binding: 2,
visibility: ShaderStages::FRAGMENT,
ty: BindingType::Buffer {
ty: bevy::render::render_resource::BufferBindingType::Uniform,
has_dynamic_offset: false,
min_binding_size: Some(PostProcessSettings::min_size()),
},
count: None,
},
],
});
```
After:
```rust
let layout = render_device.create_bind_group_layout(
"post_process_bind_group_layout"),
&BindGroupLayoutEntries::sequential(
ShaderStages::FRAGMENT,
(
texture_2d_f32(),
sampler(SamplerBindingType::Filtering),
uniform_buffer(false, Some(PostProcessSettings::min_size())),
),
),
);
```
Here's a more extreme example in bevy_solari:
86dab7f5da
---
## Changelog
- Added `BindGroupLayoutEntries` and all `BindingType` helper functions.
## Migration Guide
`RenderDevice::create_bind_group_layout()` doesn't take a
`BindGroupLayoutDescriptor` anymore. You need to provide the parameters
separately
```rust
// 0.12
let layout = render_device.create_bind_group_layout(&BindGroupLayoutDescriptor {
label: Some("post_process_bind_group_layout"),
entries: &[
BindGroupLayoutEntry {
// ...
},
],
});
// 0.13
let layout = render_device.create_bind_group_layout(
"post_process_bind_group_layout",
&[
BindGroupLayoutEntry {
// ...
},
],
);
```
## TODO
- [x] implement a `Dynamic` variant
- [x] update the `RenderDevice::create_bind_group_layout()` api to match
the one from `RenderDevice::creat_bind_group()`
- [x] docs
# Objective
- Fixes#7680
- This is an updated for https://github.com/bevyengine/bevy/pull/8899
which had the same objective but fell a long way behind the latest
changes
## Solution
The traits `WorldQueryData : WorldQuery` and `WorldQueryFilter :
WorldQuery` have been added and some of the types and functions from
`WorldQuery` has been moved into them.
`ReadOnlyWorldQuery` has been replaced with `ReadOnlyWorldQueryData`.
`WorldQueryFilter` is safe (as long as `WorldQuery` is implemented
safely).
`WorldQueryData` is unsafe - safely implementing it requires that
`Self::ReadOnly` is a readonly version of `Self` (this used to be a
safety requirement of `WorldQuery`)
The type parameters `Q` and `F` of `Query` must now implement
`WorldQueryData` and `WorldQueryFilter` respectively.
This makes it impossible to accidentally use a filter in the data
position or vice versa which was something that could lead to bugs.
~~Compile failure tests have been added to check this.~~
It was previously sometimes useful to use `Option<With<T>>` in the data
position. Use `Has<T>` instead in these cases.
The `WorldQuery` derive macro has been split into separate derive macros
for `WorldQueryData` and `WorldQueryFilter`.
Previously it was possible to derive both `WorldQuery` for a struct that
had a mixture of data and filter items. This would not work correctly in
some cases but could be a useful pattern in others. *This is no longer
possible.*
---
## Notes
- The changes outside of `bevy_ecs` are all changing type parameters to
the new types, updating the macro use, or replacing `Option<With<T>>`
with `Has<T>`.
- All `WorldQueryData` types always returned `true` for `IS_ARCHETYPAL`
so I moved it to `WorldQueryFilter` and
replaced all calls to it with `true`. That should be the only logic
change outside of the macro generation code.
- `Changed<T>` and `Added<T>` were being generated by a macro that I
have expanded. Happy to revert that if desired.
- The two derive macros share some functions for implementing
`WorldQuery` but the tidiest way I could find to implement them was to
give them a ton of arguments and ask clippy to ignore that.
## Changelog
### Changed
- Split `WorldQuery` into `WorldQueryData` and `WorldQueryFilter` which
now have separate derive macros. It is not possible to derive both for
the same type.
- `Query` now requires that the first type argument implements
`WorldQueryData` and the second implements `WorldQueryFilter`
## Migration Guide
- Update derives
```rust
// old
#[derive(WorldQuery)]
#[world_query(mutable, derive(Debug))]
struct CustomQuery {
entity: Entity,
a: &'static mut ComponentA
}
#[derive(WorldQuery)]
struct QueryFilter {
_c: With<ComponentC>
}
// new
#[derive(WorldQueryData)]
#[world_query_data(mutable, derive(Debug))]
struct CustomQuery {
entity: Entity,
a: &'static mut ComponentA,
}
#[derive(WorldQueryFilter)]
struct QueryFilter {
_c: With<ComponentC>
}
```
- Replace `Option<With<T>>` with `Has<T>`
```rust
/// old
fn my_system(query: Query<(Entity, Option<With<ComponentA>>)>)
{
for (entity, has_a_option) in query.iter(){
let has_a:bool = has_a_option.is_some();
//todo!()
}
}
/// new
fn my_system(query: Query<(Entity, Has<ComponentA>)>)
{
for (entity, has_a) in query.iter(){
//todo!()
}
}
```
- Fix queries which had filters in the data position or vice versa.
```rust
// old
fn my_system(query: Query<(Entity, With<ComponentA>)>)
{
for (entity, _) in query.iter(){
//todo!()
}
}
// new
fn my_system(query: Query<Entity, With<ComponentA>>)
{
for entity in query.iter(){
//todo!()
}
}
// old
fn my_system(query: Query<AnyOf<(&ComponentA, With<ComponentB>)>>)
{
for (entity, _) in query.iter(){
//todo!()
}
}
// new
fn my_system(query: Query<Option<&ComponentA>, Or<(With<ComponentA>, With<ComponentB>)>>)
{
for entity in query.iter(){
//todo!()
}
}
```
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Updates [`futures-lite`](https://github.com/smol-rs/futures-lite) in
bevy_tasks to the next major version (1 -> 2).
Also removes the duplication of `futures-lite`, as `async-fs` requires v
2, so there are currently 2 copies of futures-lite in the dependency
tree.
Futures-lite has received [a number of
updates](https://github.com/smol-rs/futures-lite/blob/master/CHANGELOG.md)
since bevy's current version `1.4`.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Mike <mike.hsu@gmail.com>
# Objective
Enables warning on `clippy::undocumented_unsafe_blocks` across the
workspace rather than only in `bevy_ecs`, `bevy_transform` and
`bevy_utils`. This adds a little awkwardness in a few areas of code that
have trivial safety or explain safety for multiple unsafe blocks with
one comment however automatically prevents these comments from being
missed.
## Solution
This adds `undocumented_unsafe_blocks = "warn"` to the workspace
`Cargo.toml` and fixes / adds a few missed safety comments. I also added
`#[allow(clippy::undocumented_unsafe_blocks)]` where the safety is
explained somewhere above.
There are a couple of safety comments I added I'm not 100% sure about in
`bevy_animation` and `bevy_render/src/view` and I'm not sure about the
use of `#[allow(clippy::undocumented_unsafe_blocks)]` compared to adding
comments like `// SAFETY: See above`.
# Objective
- Standardize fmt for toml files
## Solution
- Add [taplo](https://taplo.tamasfe.dev/) to CI (check for fmt and diff
for toml files), for context taplo is used by the most popular extension
in VScode [Even Better
TOML](https://marketplace.visualstudio.com/items?itemName=tamasfe.even-better-toml
- Add contribution section to explain toml fmt with taplo.
Now to pass CI you need to run `taplo fmt --option indent_string=" "` or
if you use vscode have the `Even Better TOML` extension with 4 spaces
for indent
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
The `map_async` method involves a type `BufferAsyncError`:
https://docs.rs/bevy/latest/bevy/render/render_resource/struct.BufferSlice.html#method.map_async
This type is not re-exported in Bevy, so if a user wants to store a
struct involving this type they have to add wgpu manually to their
manifest.
## Solution
- Re-export wgpu::BufferAsyncError
---
## Changelog
### Added
- Re-export wgpu::BufferAsyncError
Signed-off-by: Torstein Grindvik <torstein.grindvik@muybridge.com>
Co-authored-by: Torstein Grindvik <torstein.grindvik@muybridge.com>
# Objective
- Fix adding `#![allow(clippy::type_complexity)]` everywhere. like #9796
## Solution
- Use the new [lints] table that will land in 1.74
(https://doc.rust-lang.org/nightly/cargo/reference/unstable.html#lints)
- inherit lint to the workspace, crates and examples.
```
[lints]
workspace = true
```
## Changelog
- Bump rust version to 1.74
- Enable lints table for the workspace
```toml
[workspace.lints.clippy]
type_complexity = "allow"
```
- Allow type complexity for all crates and examples
```toml
[lints]
workspace = true
```
---------
Co-authored-by: Martín Maita <47983254+mnmaita@users.noreply.github.com>
# Objective
Closes#10319
## Changelog
* Added a new `Color::rgba_from_array([f32; 4]) -> Color` method.
* Added a new `Color::rgb_from_array([f32; 3]) -> Color` method.
* Added a new `Color::rgba_linear_from_array([f32; 4]) -> Color` method.
* Added a new `Color::rgb_linear_from_array([f32; 3]) -> Color` method.
* Added a new `Color::hsla_from_array([f32; 4]) -> Color` method.
* Added a new `Color::hsl_from_array([f32; 3]) -> Color` method.
* Added a new `Color::lcha_from_array([f32; 4]) -> Color` method.
* Added a new `Color::lch_from_array([f32; 3]) -> Color` method.
* Added a new `Color::rgba_to_vec4(&self) -> Vec4` method.
* Added a new `Color::rgba_to_array(&self) -> [f32; 4]` method.
* Added a new `Color::rgb_to_vec3(&self) -> Vec3` method.
* Added a new `Color::rgb_to_array(&self) -> [f32; 3]` method.
* Added a new `Color::rgba_linear_to_vec4(&self) -> Vec4` method.
* Added a new `Color::rgba_linear_to_array(&self) -> [f32; 4]` method.
* Added a new `Color::rgb_linear_to_vec3(&self) -> Vec3` method.
* Added a new `Color::rgb_linear_to_array(&self) -> [f32; 3]` method.
* Added a new `Color::hsla_to_vec4(&self) -> Vec4` method.
* Added a new `Color::hsla_to_array(&self) -> [f32; 4]` method.
* Added a new `Color::hsl_to_vec3(&self) -> Vec3` method.
* Added a new `Color::hsl_to_array(&self) -> [f32; 3]` method.
* Added a new `Color::lcha_to_vec4(&self) -> Vec4` method.
* Added a new `Color::lcha_to_array(&self) -> [f32; 4]` method.
* Added a new `Color::lch_to_vec3(&self) -> Vec3` method.
* Added a new `Color::lch_to_array(&self) -> [f32; 3]` method.
## Migration Guide
`Color::from(Vec4)` is now `Color::rgba_from_array(impl Into<[f32; 4]>)`
`Vec4::from(Color)` is now `Color::rgba_to_vec4(&self)`
Before:
```rust
let color_vec4 = Vec4::new(0.5, 0.5, 0.5);
let color_from_vec4 = Color::from(color_vec4);
let color_array = [0.5, 0.5, 0.5];
let color_from_array = Color::from(color_array);
```
After:
```rust
let color_vec4 = Vec4::new(0.5, 0.5, 0.5);
let color_from_vec4 = Color::rgba_from_array(color_vec4);
let color_array = [0.5, 0.5, 0.5];
let color_from_array = Color::rgba_from_array(color_array);
```
# Objective
Make sure a camera which has had its render target changed recomputes
its info.
On main, the following is possible:
- System A has an inactive camera with render target set to the default
`Image` (i.e. white 1x1 rgba texture)
Later:
- System B sets the same camera active and sets the `camera.target` to a
newly created `Image`
**Bug**: Since `camera_system` only checks `Modified` and not `Added`
events, the size of the render target is not recomputed, which means the
camera will render with 1x1 size even though the new target is an
entirely different size.
## Solution
- Ensure `camera_system` checks `Added` image assets events
## Changelog
### Fixed
- Cameras which have their render targets changed to a newly created
target with a different size than the previous target will now render
properly
---------
Signed-off-by: Torstein Grindvik <torstein.grindvik@muybridge.com>
Co-authored-by: Torstein Grindvik <torstein.grindvik@muybridge.com>
Co-authored-by: Afonso Lage <lage.afonso@gmail.com>
# Objective
Currently, if a large amount of inactive cameras are spawned, they will
immensely slow down performance.
This can be reproduced by adding
```rust
let default_image = images.add(default());
for _ in 0..10000 {
commands.spawn(Camera3dBundle {
camera: Camera {
is_active: false,
target: RenderTarget::Image(default_image.clone()),
..default()
},
..default()
});
}
```
to for example `3d_shapes`.
Using `tracy`, it's clear that preparing view bind groups for all
cameras is still happening.
Also, visibility checks on the extracted views from inactive cameras
also take place.
## Performance gains
The following `tracy` comparisons show the effect of skipping this
unneeded work.
Yellow is Bevy main, red is with the fix.
### Visibility checks
### Bind group preparation
## Solution
- Check if the cameras are inactive in the appropriate places, and if so
skip them
## Changelog
### Changed
- Do not extract views from inactive cameras or check visiblity from
their extracted views
Signed-off-by: Torstein Grindvik <torstein.grindvik@muybridge.com>
Co-authored-by: Torstein Grindvik <torstein.grindvik@muybridge.com>
# Objective
Hot reloading shader imports on windows is currently broken due to
inconsistent `/` and `\` usage ('/` is used in the user facing APIs and
`\` is produced by notify-rs (and likely other OS apis).
Fixes#10500
## Solution
Standardize import paths when loading a `Shader`. The correct long term
fix is to standardize AssetPath on `/`-only, but this is the right scope
of fix for a patch release.
---------
Co-authored-by: François <mockersf@gmail.com>
# Objective
Calling `RenderDevice::poll` requires an instance of `wgpu::Maintain`,
but the type was not reexported by bevy. Working around it requires
adding a dependency on `wgpu`, since bevy does not reexport the `wgpu`
crate as a whole anywhere.
## Solution
Reexport `wgpu::Maintain` in `render_resource`, where the other wgpu
types are reexported.
# Objective
Had an issue where I had `VisibilityBundle` inside a bundle that
implements `Clone`, but since `VisibilityBundle` doesn't implement
`Clone` that wasn't possible. This PR fixes that.
## Solution
Implement `Clone` for `VisibilityBundle` by deriving it. And also
`SpatialBundle` too because why not.
---
## Changelog
- Added implementation for `Clone` on `VisibilityBundle` and
`SpatialBundle`.
Preparing next release
This PR has been auto-generated
---------
Co-authored-by: Bevy Auto Releaser <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: François <mockersf@gmail.com>
# Objective
Fixes https://github.com/bevyengine/bevy/issues/9077 (see this issue for
motivations)
## Solution
Implement 1 and 2 of the "How to fix it" section of
https://github.com/bevyengine/bevy/issues/9077
`update_directional_light_cascades` is split into
`clear_directional_light_cascades` and a generic
`build_directional_light_cascades`, to clear once and potentially insert
many times.
---
## Changelog
`DirectionalLight`'s computation is now generic over `CameraProjection`
and can work with custom camera projections.
## Migration Guide
If you have a component `MyCustomProjection` that implements
`CameraProjection`:
- You need to implement a new required associated method,
`get_frustum_corners`, returning an array of the corners of a subset of
the frustum with given `z_near` and `z_far`, in local camera space.
- You can now add the
`build_directional_light_cascades::<MyCustomProjection>` system in
`SimulationLightSystems::UpdateDirectionalLightCascades` after
`clear_directional_light_cascades` for your projection to work with
directional lights.
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
Alternative to #7310
## Solution
Implemented the suggestion from
https://github.com/bevyengine/bevy/pull/7310#discussion_r1083356655
I am guessing that these were originally split as an optimization, but I
am not sure since I believe the original author of the code is the one
speculating about combining them up there.
## Benchmarks
I ran three benchmarks to compare main, this PR, and the approach from
#7310
([updated](https://github.com/rparrett/bevy/commits/rebased-parallel-check-visibility)
to the same commit on main).
This seems to perform slightly better than main in scenarios where most
entities have AABBs, and a bit worse when they don't (`many_lights`).
That seems to make sense to me.
Either way, the difference is ~-20 microseconds in the more common
scenarios or ~+100 microseconds in the less common scenario. I would
speculate that this might perform **very slightly** worse in
single-threaded scenarios.
Benches were run in release mode for 2000 frames while capturing a trace
with tracy.
| bench | commit | check_visibility_system mean μs |
| -- | -- | -- |
| many_cubes | main | 929.5 |
| many_cubes | this | 914.0 |
| many_cubes | 7310 | 1003.5 |
| | |
| many_foxes | main | 191.6 |
| many_foxes | this | 173.2 |
| many_foxes | 7310 | 167.9 |
| | |
| many_lights | main | 619.3 |
| many_lights | this | 703.7 |
| many_lights | 7310 | 842.5 |
## Notes
Technically this behaves slightly differently -- prior to this PR, view
visibility was determined even for entities without `GlobalTransform`. I
don't think this has any practical impact though.
IMO, I don't think we need to do this. But I opened a PR because it
seemed like the handiest way to share the code / benchmarks.
## TODO
I have done some rudimentary testing with the examples above, but I can
do some screenshot diffing if it seems like we want to do this.
# Objective
<img width="1920" alt="Screenshot 2023-04-26 at 01 07 34"
src="https://user-images.githubusercontent.com/418473/234467578-0f34187b-5863-4ea1-88e9-7a6bb8ce8da3.png">
This PR adds both diffuse and specular light transmission capabilities
to the `StandardMaterial`, with support for screen space refractions.
This enables realistically representing a wide range of real-world
materials, such as:
- Glass; (Including frosted glass)
- Transparent and translucent plastics;
- Various liquids and gels;
- Gemstones;
- Marble;
- Wax;
- Paper;
- Leaves;
- Porcelain.
Unlike existing support for transparency, light transmission does not
rely on fixed function alpha blending, and therefore works with both
`AlphaMode::Opaque` and `AlphaMode::Mask` materials.
## Solution
- Introduces a number of transmission related fields in the
`StandardMaterial`;
- For specular transmission:
- Adds logic to take a view main texture snapshot after the opaque
phase; (in order to perform screen space refractions)
- Introduces a new `Transmissive3d` phase to the renderer, to which all
meshes with `transmission > 0.0` materials are sent.
- Calculates a light exit point (of the approximate mesh volume) using
`ior` and `thickness` properties
- Samples the snapshot texture with an adaptive number of taps across a
`roughness`-controlled radius enabling “blurry” refractions
- For diffuse transmission:
- Approximates transmitted diffuse light by using a second, flipped +
displaced, diffuse-only Lambertian lobe for each light source.
## To Do
- [x] Figure out where `fresnel_mix()` is taking place, if at all, and
where `dielectric_specular` is being calculated, if at all, and update
them to use the `ior` value (Not a blocker, just a nice-to-have for more
correct BSDF)
- To the _best of my knowledge, this is now taking place, after
964340cdd. The fresnel mix is actually "split" into two parts in our
implementation, one `(1 - fresnel(...))` in the transmission, and
`fresnel()` in the light implementations. A surface with more
reflectance now will produce slightly dimmer transmission towards the
grazing angle, as more of the light gets reflected.
- [x] Add `transmission_texture`
- [x] Add `diffuse_transmission_texture`
- [x] Add `thickness_texture`
- [x] Add `attenuation_distance` and `attenuation_color`
- [x] Connect values to glTF loader
- [x] `transmission` and `transmission_texture`
- [x] `thickness` and `thickness_texture`
- [x] `ior`
- [ ] `diffuse_transmission` and `diffuse_transmission_texture` (needs
upstream support in `gltf` crate, not a blocker)
- [x] Add support for multiple screen space refraction “steps”
- [x] Conditionally create no transmission snapshot texture at all if
`steps == 0`
- [x] Conditionally enable/disable screen space refraction transmission
snapshots
- [x] Read from depth pre-pass to prevent refracting pixels in front of
the light exit point
- [x] Use `interleaved_gradient_noise()` function for sampling blur in a
way that benefits from TAA
- [x] Drill down a TAA `#define`, tweak some aspects of the effect
conditionally based on it
- [x] Remove const array that's crashing under HLSL (unless a new `naga`
release with https://github.com/gfx-rs/naga/pull/2496 comes out before
we merge this)
- [ ] Look into alternatives to the `switch` hack for dynamically
indexing the const array (might not be needed, compilers seem to be
decent at expanding it)
- [ ] Add pipeline keys for gating transmission (do we really want/need
this?)
- [x] Tweak some material field/function names?
## A Note on Texture Packing
_This was originally added as a comment to the
`specular_transmission_texture`, `thickness_texture` and
`diffuse_transmission_texture` documentation, I removed it since it was
more confusing than helpful, and will likely be made redundant/will need
to be updated once we have a better infrastructure for preprocessing
assets_
Due to how channels are mapped, you can more efficiently use a single
shared texture image
for configuring the following:
- R - `specular_transmission_texture`
- G - `thickness_texture`
- B - _unused_
- A - `diffuse_transmission_texture`
The `KHR_materials_diffuse_transmission` glTF extension also defines a
`diffuseTransmissionColorTexture`,
that _we don't currently support_. One might choose to pack the
intensity and color textures together,
using RGB for the color and A for the intensity, in which case this
packing advice doesn't really apply.
---
## Changelog
- Added a new `Transmissive3d` render phase for rendering specular
transmissive materials with screen space refractions
- Added rendering support for transmitted environment map light on the
`StandardMaterial` as a fallback for screen space refractions
- Added `diffuse_transmission`, `specular_transmission`, `thickness`,
`ior`, `attenuation_distance` and `attenuation_color` to the
`StandardMaterial`
- Added `diffuse_transmission_texture`, `specular_transmission_texture`,
`thickness_texture` to the `StandardMaterial`, gated behind a new
`pbr_transmission_textures` cargo feature (off by default, for maximum
hardware compatibility)
- Added `Camera3d::screen_space_specular_transmission_steps` for
controlling the number of “layers of transparency” rendered for
transmissive objects
- Added a `TransmittedShadowReceiver` component for enabling shadows in
(diffusely) transmitted light. (disabled by default, as it requires
carefully setting up the `thickness` to avoid self-shadow artifacts)
- Added support for the `KHR_materials_transmission`,
`KHR_materials_ior` and `KHR_materials_volume` glTF extensions
- Renamed items related to temporal jitter for greater consistency
## Migration Guide
- `SsaoPipelineKey::temporal_noise` has been renamed to
`SsaoPipelineKey::temporal_jitter`
- The `TAA` shader def (controlled by the presence of the
`TemporalAntiAliasSettings` component in the camera) has been replaced
with the `TEMPORAL_JITTER` shader def (controlled by the presence of the
`TemporalJitter` component in the camera)
- `MeshPipelineKey::TAA` has been replaced by
`MeshPipelineKey::TEMPORAL_JITTER`
- The `TEMPORAL_NOISE` shader def has been consolidated with
`TEMPORAL_JITTER`
# Objective
- We need to check multiple times if a color is fully transparent, e.g.
for performance optimizations.
- Make code more readable.
- Reduce code duplication, to simplify making changes if needed (e.g. if
we need to take floating point weirdness into account later on).
## Solution
- Introduce a new `Color::is_fully_transparent` helper function to
determine if the alpha of a color is 0.
- Use the helper function in our UI rendering code.
---
## Changelog
- Added `Color::is_fully_transparent` helper function.
---------
Co-authored-by: François <mockersf@gmail.com>
# Objective
- Work towards GPU-driven culling
(https://github.com/bevyengine/bevy/pull/10164)
## Solution
- Pass the view frustum to the shader view uniform
---
## Changelog
- View Frustums are now extracted to the render world and made available
to shaders
# Objective
Align all error-like types to implement `Error`.
Fixes #10176
## Solution
- Derive `Error` on more types
- Refactor instances of manual implementations that could be derived
This adds thiserror as a dependency to bevy_transform, which might
increase compilation time -- but I don't know of any situation where you
might only use that but not any other crate that pulls in bevy_utils.
The `contributors` example has a `LoadContributorsError` type, but as
it's an example I have not updated it. Doing that would mean either
having a `use bevy_internal::utils::thiserror::Error;` in an example
file, or adding `thiserror` as a dev-dependency to the main `bevy`
crate.
---
## Changelog
- All `…Error` types now implement the `Error` trait
Existing truncation code limits the number of attribute buffers to be
less than or equal to the number of vertices.
Instead the number of elements from each attribute buffer should be
limited to the length of the shortest buffer as mentioned in the earlier
warning.
# Objective
- Fixes#10267
## Solution
- Moves the `.take()` from the outer loop of attribute buffers, to the
inner loop of attribute values.
---
# Objective
- Remove special cases where `clippy::doc_markdown` lint is disabled.
## Solution
- Add default values back into `clippy.toml` by adding `".."` to the
list of `doc-valid-idents`.
- Add `"VSync"` and `"WebGL2"` to the list of `doc-valid-idents`.
- Remove all instances where `clippy::doc_markdown` is allowed.
- Fix `max_mip` formatting so that there isn't a warning.
# Situation
- In case of parent without visibility components, the visibility
inheritance of children creates a panic.
## Solution
- Apply same fallback visibility as parent not found instead of panic.
# Objective
- Build on the changes in https://github.com/bevyengine/bevy/pull/9982
- Use `ImageSamplerDescriptor` as the "public image sampler descriptor"
interface in all places (for consistency)
- Make it possible to configure textures to use the "default" sampler
(as configured in the `DefaultImageSampler` resource)
- Fix a bug introduced in #9982 that prevents configured samplers from
being used in Basis, KTX2, and DDS textures
---
## Migration Guide
- When using the `Image` API, use `ImageSamplerDescriptor` instead of
`wgpu::SamplerDescriptor`
- If writing custom wgpu renderer features that work with `Image`, call
`&image_sampler.as_wgpu()` to convert to a wgpu descriptor.
# Objective
First of all, this PR took heavy inspiration from #7760 and #5715. It
intends to also fix#5569, but with a slightly different approach.
This also fixes#9335 by reexporting `DynEq`.
## Solution
The advantage of this API is that we can intern a value without
allocating for zero-sized-types and for enum variants that have no
fields. This PR does this automatically in the `SystemSet` and
`ScheduleLabel` derive macros for unit structs and fieldless enum
variants. So this should cover many internal and external use cases of
`SystemSet` and `ScheduleLabel`. In these optimal use cases, no memory
will be allocated.
- The interning returns a `Interned<dyn SystemSet>`, which is just a
wrapper around a `&'static dyn SystemSet`.
- `Hash` and `Eq` are implemented in terms of the pointer value of the
reference, similar to my first approach of anonymous system sets in
#7676.
- Therefore, `Interned<T>` does not implement `Borrow<T>`, only `Deref`.
- The debug output of `Interned<T>` is the same as the interned value.
Edit:
- `AppLabel` is now also interned and the old
`derive_label`/`define_label` macros were replaced with the new
interning implementation.
- Anonymous set ids are reused for different `Schedule`s, reducing the
amount of leaked memory.
### Pros
- `InternedSystemSet` and `InternedScheduleLabel` behave very similar to
the current `BoxedSystemSet` and `BoxedScheduleLabel`, but can be copied
without an allocation.
- Many use cases don't allocate at all.
- Very fast lookups and comparisons when using `InternedSystemSet` and
`InternedScheduleLabel`.
- The `intern` module might be usable in other areas.
- `Interned{ScheduleLabel, SystemSet, AppLabel}` does implement
`{ScheduleLabel, SystemSet, AppLabel}`, increasing ergonomics.
### Cons
- Implementors of `SystemSet` and `ScheduleLabel` still need to
implement `Hash` and `Eq` (and `Clone`) for it to work.
## Changelog
### Added
- Added `intern` module to `bevy_utils`.
- Added reexports of `DynEq` to `bevy_ecs` and `bevy_app`.
### Changed
- Replaced `BoxedSystemSet` and `BoxedScheduleLabel` with
`InternedSystemSet` and `InternedScheduleLabel`.
- Replaced `impl AsRef<dyn ScheduleLabel>` with `impl ScheduleLabel`.
- Replaced `AppLabelId` with `InternedAppLabel`.
- Changed `AppLabel` to use `Debug` for error messages.
- Changed `AppLabel` to use interning.
- Changed `define_label`/`derive_label` to use interning.
- Replaced `define_boxed_label`/`derive_boxed_label` with
`define_label`/`derive_label`.
- Changed anonymous set ids to be only unique inside a schedule, not
globally.
- Made interned label types implement their label trait.
### Removed
- Removed `define_boxed_label` and `derive_boxed_label`.
## Migration guide
- Replace `BoxedScheduleLabel` and `Box<dyn ScheduleLabel>` with
`InternedScheduleLabel` or `Interned<dyn ScheduleLabel>`.
- Replace `BoxedSystemSet` and `Box<dyn SystemSet>` with
`InternedSystemSet` or `Interned<dyn SystemSet>`.
- Replace `AppLabelId` with `InternedAppLabel` or `Interned<dyn
AppLabel>`.
- Types manually implementing `ScheduleLabel`, `AppLabel` or `SystemSet`
need to implement:
- `dyn_hash` directly instead of implementing `DynHash`
- `as_dyn_eq`
- Pass labels to `World::try_schedule_scope`, `World::schedule_scope`,
`World::try_run_schedule`. `World::run_schedule`, `Schedules::remove`,
`Schedules::remove_entry`, `Schedules::contains`, `Schedules::get` and
`Schedules::get_mut` by value instead of by reference.
---------
Co-authored-by: Joseph <21144246+JoJoJet@users.noreply.github.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
When a mesh vertex attribute has a vertex count mismatch, a warning
message is printed with the index of the attribute which did not match.
Change to name the attribute, or fall back to the old behaviour if it
was not a known attribute.
Before:
```
MeshVertexAttributeId(2) has a different vertex count (32) than other attributes (64) in this mesh, all attributes will be truncated to match the smallest.
```
After:
```
Vertex_Uv has a different vertex count (32) than other attributes (64) in this mesh, all attributes will be truncated to match the smallest.
```
## Solution
Name the mesh attribute which had a count mismatch.
## Changelog
- If a mesh vertex attribute has a different count than other vertex
attributes, name the offending attribute using a human readable name
Signed-off-by: Torstein Grindvik <torstein.grindvik@muybridge.com>
Co-authored-by: Torstein Grindvik <torstein.grindvik@muybridge.com>
Closes#9946
# Objective
Add a new type mirroring `wgpu::SamplerDescriptor` for
`ImageLoaderSettings` to control how a loaded image should be sampled.
Fix issues with texture sampler descriptors not being set when loading
gltf texture from URI.
## Solution
Add a new `ImageSamplerDescriptor` and its affiliated types that mirrors
`wgpu::SamplerDescriptor`, use it in the image loader settings.
---
## Changelog
### Added
- Added new types `ImageSamplerDescriptor`, `ImageAddressMode`,
`ImageFilterMode`, `ImageCompareFunction` and `ImageSamplerBorderColor`
that mirrors the corresponding wgpu types.
- `ImageLoaderSettings` now carries an `ImageSamplerDescriptor` field
that will be used to determine how the loaded image is sampled, and will
be serialized as part of the image assets `.meta` files.
### Changed
- `Image::from_buffer` now takes the sampler descriptor to use as an
additional parameter.
### Fixed
- Sampler descriptors are set for gltf textures loaded from URI.
# Objective
A follow-up PR for https://github.com/bevyengine/bevy/pull/10221
## Changelog
Replaced usages of texture_descriptor.size with the helper methods of
`Image` through the entire engine codebase
# Objective
To get the width or height of an image you do:
```rust
self.texture_descriptor.size.{width, height}
```
that is quite verbose.
This PR adds some convenient methods for Image to reduce verbosity.
## Changelog
* Add a `width()` method for getting the width of an image.
* Add a `height()` method for getting the height of an image.
* Rename the `size()` method to `size_f32()`.
* Add a `size()` method for getting the size of an image as u32.
* Renamed the `aspect_2d()` method to `aspect_ratio()`.
## Migration Guide
Replace calls to the `Image::size()` method with `size_f32()`.
Replace calls to the `Image::aspect_2d()` method with `aspect_ratio()`.
# Objective
- Fix#10165
- On iOS simulator on apple silicon Macs, shader validation is going
through the host, but device limits are reported for the device. They
sometimes differ, and cause the validation to crash on something that
should work
```
-[MTLDebugRenderCommandEncoder validateCommonDrawErrors:]:5775: failed assertion `Draw Errors Validation
Fragment Function(fragment_): the offset into the buffer _naga_oil_mod_MJSXM6K7OBRHEOR2NVSXG2C7OZUWK527MJUW4ZDJNZTXG_memberfog that is bound at buffer index 6 must be a multiple of 256 but was set to 448.
```
## Solution
- Add a custom flag when building for the simulator and override the
buffer alignment
# Objective
- Closes#10049.
- Detect DDS texture containing a cubemap or a cubemap array.
## Solution
- When loading a dds texture, the header capabilities are checked for
the cubemap flag. An error is returned if not all faces are provided.
---
## Changelog
### Added
- Added a new texture error `TextureError::IncompleteCubemap`, used for
dds cubemap textures containing less than 6 faces, as that is not
supported on modern graphics APIs.
### Fixed
- DDS cubemaps are now loaded as cubemaps instead of 2D textures.
## Migration Guide
If you are matching on a `TextureError`, you will need to add a new
branch to handle `TextureError::IncompleteCubemap`.
# Objective
Simplify bind group creation code. alternative to (and based on) #9476
## Solution
- Add a `BindGroupEntries` struct that can transparently be used where
`&[BindGroupEntry<'b>]` is required in BindGroupDescriptors.
Allows constructing the descriptor's entries as:
```rust
render_device.create_bind_group(
"my_bind_group",
&my_layout,
&BindGroupEntries::with_indexes((
(2, &my_sampler),
(3, my_uniform),
)),
);
```
instead of
```rust
render_device.create_bind_group(
"my_bind_group",
&my_layout,
&[
BindGroupEntry {
binding: 2,
resource: BindingResource::Sampler(&my_sampler),
},
BindGroupEntry {
binding: 3,
resource: my_uniform,
},
],
);
```
or
```rust
render_device.create_bind_group(
"my_bind_group",
&my_layout,
&BindGroupEntries::sequential((&my_sampler, my_uniform)),
);
```
instead of
```rust
render_device.create_bind_group(
"my_bind_group",
&my_layout,
&[
BindGroupEntry {
binding: 0,
resource: BindingResource::Sampler(&my_sampler),
},
BindGroupEntry {
binding: 1,
resource: my_uniform,
},
],
);
```
the structs has no user facing macros, is tuple-type-based so stack
allocated, and has no noticeable impact on compile time.
- Also adds a `DynamicBindGroupEntries` struct with a similar api that
uses a `Vec` under the hood and allows extending the entries.
- Modifies `RenderDevice::create_bind_group` to take separate arguments
`label`, `layout` and `entries` instead of a `BindGroupDescriptor`
struct. The struct can't be stored due to the internal references, and
with only 3 members arguably does not add enough context to justify
itself.
- Modify the codebase to use the new api and the `BindGroupEntries` /
`DynamicBindGroupEntries` structs where appropriate (whenever the
entries slice contains more than 1 member).
## Migration Guide
- Calls to `RenderDevice::create_bind_group({BindGroupDescriptor {
label, layout, entries })` must be amended to
`RenderDevice::create_bind_group(label, layout, entries)`.
- If `label`s have been specified as `"bind_group_name".into()`, they
need to change to just `"bind_group_name"`. `Some("bind_group_name")`
and `None` will still work, but `Some("bind_group_name")` can optionally
be simplified to just `"bind_group_name"`.
---------
Co-authored-by: IceSentry <IceSentry@users.noreply.github.com>
# Objective
- bump naga_oil to 0.10
- update shader imports to use rusty syntax
## Migration Guide
naga_oil 0.10 reworks the import mechanism to support more syntax to
make it more rusty, and test for item use before importing to determine
which imports are modules and which are items, which allows:
- use rust-style imports
```
#import bevy_pbr::{
pbr_functions::{alpha_discard as discard, apply_pbr_lighting},
mesh_bindings,
}
```
- import partial paths:
```
#import part::of::path
...
path::remainder::function();
```
which will call to `part::of::path::remainder::function`
- use fully qualified paths without importing:
```
// #import bevy_pbr::pbr_functions
bevy_pbr::pbr_functions::pbr()
```
- use imported items without qualifying
```
#import bevy_pbr::pbr_functions::pbr
// for backwards compatibility the old style is still supported:
// #import bevy_pbr::pbr_functions pbr
...
pbr()
```
- allows most imported items to end with `_` and numbers (naga_oil#30).
still doesn't allow struct members to end with `_` or numbers but it's
progress.
- the vast majority of existing shader code will work without changes,
but will emit "deprecated" warnings for old-style imports. these can be
suppressed with the `allow-deprecated` feature.
- partly breaks overrides (as far as i'm aware nobody uses these yet) -
now overrides will only be applied if the overriding module is added as
an additional import in the arguments to `Composer::make_naga_module` or
`Composer::add_composable_module`. this is necessary to support
determining whether imports are modules or items.
# Objective
allow extending `Material`s (including the built in `StandardMaterial`)
with custom vertex/fragment shaders and additional data, to easily get
pbr lighting with custom modifications, or otherwise extend a base
material.
# Solution
- added `ExtendedMaterial<B: Material, E: MaterialExtension>` which
contains a base material and a user-defined extension.
- added example `extended_material` showing how to use it
- modified AsBindGroup to have "unprepared" functions that return raw
resources / layout entries so that the extended material can combine
them
note: doesn't currently work with array resources, as i can't figure out
how to make the OwnedBindingResource::get_binding() work, as wgpu
requires a `&'a[&'a TextureView]` and i have a `Vec<TextureView>`.
# Migration Guide
manual implementations of `AsBindGroup` will need to be adjusted, the
changes are pretty straightforward and can be seen in the diff for e.g.
the `texture_binding_array` example.
---------
Co-authored-by: Robert Swain <robert.swain@gmail.com>
# Objective
- Added support for newer AMD Radeon cards in the mod.rs file located at
``crates/bevy_render/src/view/window/mod.rs``
## Solution
- All I needed to add was ``name.starts_with("Radeon") ||`` to the
existing code on line 347 of
``crates/bevy_render/src/view/window/mod.rs``
---
## Changelog
- Changed ``crates/bevy_render/src/view/window/mod.rs``
# Objective
Current `FixedTime` and `Time` have several problems. This pull aims to
fix many of them at once.
- If there is a longer pause between app updates, time will jump forward
a lot at once and fixed time will iterate on `FixedUpdate` for a large
number of steps. If the pause is merely seconds, then this will just
mean jerkiness and possible unexpected behaviour in gameplay. If the
pause is hours/days as with OS suspend, the game will appear to freeze
until it has caught up with real time.
- If calculating a fixed step takes longer than specified fixed step
period, the game will enter a death spiral where rendering each frame
takes longer and longer due to more and more fixed step updates being
run per frame and the game appears to freeze.
- There is no way to see current fixed step elapsed time inside fixed
steps. In order to track this, the game designer needs to add a custom
system inside `FixedUpdate` that calculates elapsed or step count in a
resource.
- Access to delta time inside fixed step is `FixedStep::period` rather
than `Time::delta`. This, coupled with the issue that `Time::elapsed`
isn't available at all for fixed steps, makes it that time requiring
systems are either implemented to be run in `FixedUpdate` or `Update`,
but rarely work in both.
- Fixes#8800
- Fixes#8543
- Fixes#7439
- Fixes#5692
## Solution
- Create a generic `Time<T>` clock that has no processing logic but
which can be instantiated for multiple usages. This is also exposed for
users to add custom clocks.
- Create three standard clocks, `Time<Real>`, `Time<Virtual>` and
`Time<Fixed>`, all of which contain their individual logic.
- Create one "default" clock, which is just `Time` (or `Time<()>`),
which will be overwritten from `Time<Virtual>` on each update, and
`Time<Fixed>` inside `FixedUpdate` schedule. This way systems that do
not care specifically which time they track can work both in `Update`
and `FixedUpdate` without changes and the behaviour is intuitive.
- Add `max_delta` to virtual time update, which limits how much can be
added to virtual time by a single update. This fixes both the behaviour
after a long freeze, and also the death spiral by limiting how many
fixed timestep iterations there can be per update. Possible future work
could be adding `max_accumulator` to add a sort of "leaky bucket" time
processing to possibly smooth out jumps in time while keeping frame rate
stable.
- Many minor tweaks and clarifications to the time functions and their
documentation.
## Changelog
- `Time::raw_delta()`, `Time::raw_elapsed()` and related methods are
moved to `Time<Real>::delta()` and `Time<Real>::elapsed()` and now match
`Time` API
- `FixedTime` is now `Time<Fixed>` and matches `Time` API.
- `Time<Fixed>` default timestep is now 64 Hz, or 15625 microseconds.
- `Time` inside `FixedUpdate` now reflects fixed timestep time, making
systems portable between `Update ` and `FixedUpdate`.
- `Time::pause()`, `Time::set_relative_speed()` and related methods must
now be called as `Time<Virtual>::pause()` etc.
- There is a new `max_delta` setting in `Time<Virtual>` that limits how
much the clock can jump by a single update. The default value is 0.25
seconds.
- Removed `on_fixed_timer()` condition as `on_timer()` does the right
thing inside `FixedUpdate` now.
## Migration Guide
- Change all `Res<Time>` instances that access `raw_delta()`,
`raw_elapsed()` and related methods to `Res<Time<Real>>` and `delta()`,
`elapsed()`, etc.
- Change access to `period` from `Res<FixedTime>` to `Res<Time<Fixed>>`
and use `delta()`.
- The default timestep has been changed from 60 Hz to 64 Hz. If you wish
to restore the old behaviour, use
`app.insert_resource(Time::<Fixed>::from_hz(60.0))`.
- Change `app.insert_resource(FixedTime::new(duration))` to
`app.insert_resource(Time::<Fixed>::from_duration(duration))`
- Change `app.insert_resource(FixedTime::new_from_secs(secs))` to
`app.insert_resource(Time::<Fixed>::from_seconds(secs))`
- Change `system.on_fixed_timer(duration)` to
`system.on_timer(duration)`. Timers in systems placed in `FixedUpdate`
schedule automatically use the fixed time clock.
- Change `ResMut<Time>` calls to `pause()`, `is_paused()`,
`set_relative_speed()` and related methods to `ResMut<Time<Virtual>>`
calls. The API is the same, with the exception that `relative_speed()`
will return the actual last ste relative speed, while
`effective_relative_speed()` returns 0.0 if the time is paused and
corresponds to the speed that was set when the update for the current
frame started.
## Todo
- [x] Update pull name and description
- [x] Top level documentation on usage
- [x] Fix examples
- [x] Decide on default `max_delta` value
- [x] Decide naming of the three clocks: is `Real`, `Virtual`, `Fixed`
good?
- [x] Decide if the three clock inner structures should be in prelude
- [x] Decide on best way to configure values at startup: is manually
inserting a new clock instance okay, or should there be config struct
separately?
- [x] Fix links in docs
- [x] Decide what should be public and what not
- [x] Decide how `wrap_period` should be handled when it is changed
- [x] ~~Add toggles to disable setting the clock as default?~~ No,
separate pull if needed.
- [x] Add tests
- [x] Reformat, ensure adheres to conventions etc.
- [x] Build documentation and see that it looks correct
## Contributors
Huge thanks to @alice-i-cecile and @maniwani while building this pull.
It was a shared effort!
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Cameron <51241057+maniwani@users.noreply.github.com>
Co-authored-by: Jerome Humbert <djeedai@gmail.com>
# Objective
From my understanding, although resources are not meant to be created
and removed at every frame, they are still meant to be created
dynamically during the lifetime of the App.
But because the extract_resource API does not allow optional resources
from the main world, it's impossible to use resources in the render
phase that were not created before the render sub-app itself.
## Solution
Because the ECS engine already allows for system parameters to be
`Option<Res>`, it just had to be added.
---
## Changelog
- Changed
- `extract_resource` now takes an optional main world resource
- Fixed
- `ExtractResourcePlugin` doesn't cause panics anymore if the resource
is not already inserted
# Objective
Fixes [#10061]
## Solution
Renamed `RenderInstance` to `ExtractInstance`, `RenderInstances` to
`ExtractedInstances` and `RenderInstancePlugin` to
`ExtractInstancesPlugin`
# Objective
- Add a [Deferred
Renderer](https://en.wikipedia.org/wiki/Deferred_shading) to Bevy.
- This allows subsequent passes to access per pixel material information
before/during shading.
- Accessing this per pixel material information is needed for some
features, like GI. It also makes other features (ex. Decals) simpler to
implement and/or improves their capability. There are multiple
approaches to accomplishing this. The deferred shading approach works
well given the limitations of WebGPU and WebGL2.
Motivation: [I'm working on a GI solution for
Bevy](https://youtu.be/eH1AkL-mwhI)
# Solution
- The deferred renderer is implemented with a prepass and a deferred
lighting pass.
- The prepass renders opaque objects into the Gbuffer attachment
(`Rgba32Uint`). The PBR shader generates a `PbrInput` in mostly the same
way as the forward implementation and then [packs it into the
Gbuffer](ec1465559f/crates/bevy_pbr/src/render/pbr.wgsl (L168)).
- The deferred lighting pass unpacks the `PbrInput` and [feeds it into
the pbr()
function](ec1465559f/crates/bevy_pbr/src/deferred/deferred_lighting.wgsl (L65)),
then outputs the shaded color data.
- There is now a resource
[DefaultOpaqueRendererMethod](ec1465559f/crates/bevy_pbr/src/material.rs (L599))
that can be used to set the default render method for opaque materials.
If materials return `None` from
[opaque_render_method()](ec1465559f/crates/bevy_pbr/src/material.rs (L131))
the `DefaultOpaqueRendererMethod` will be used. Otherwise, custom
materials can also explicitly choose to only support Deferred or Forward
by returning the respective
[OpaqueRendererMethod](ec1465559f/crates/bevy_pbr/src/material.rs (L603))
- Deferred materials can be used seamlessly along with both opaque and
transparent forward rendered materials in the same scene. The [deferred
rendering
example](https://github.com/DGriffin91/bevy/blob/deferred/examples/3d/deferred_rendering.rs)
does this.
- The deferred renderer does not support MSAA. If any deferred materials
are used, MSAA must be disabled. Both TAA and FXAA are supported.
- Deferred rendering supports WebGL2/WebGPU.
## Custom deferred materials
- Custom materials can support both deferred and forward at the same
time. The
[StandardMaterial](ec1465559f/crates/bevy_pbr/src/render/pbr.wgsl (L166))
does this. So does [this
example](https://github.com/DGriffin91/bevy_glowy_orb_tutorial/blob/deferred/assets/shaders/glowy.wgsl#L56).
- Custom deferred materials that require PBR lighting can create a
`PbrInput`, write it to the deferred GBuffer and let it be rendered by
the `PBRDeferredLightingPlugin`.
- Custom deferred materials that require custom lighting have two
options:
1. Use the base_color channel of the `PbrInput` combined with the
`STANDARD_MATERIAL_FLAGS_UNLIT_BIT` flag.
[Example.](https://github.com/DGriffin91/bevy_glowy_orb_tutorial/blob/deferred/assets/shaders/glowy.wgsl#L56)
(If the unlit bit is set, the base_color is stored as RGB9E5 for extra
precision)
2. A Custom Deferred Lighting pass can be created, either overriding the
default, or running in addition. The a depth buffer is used to limit
rendering to only the required fragments for each deferred lighting
pass. Materials can set their respective depth id via the
[deferred_lighting_pass_id](b79182d2a3/crates/bevy_pbr/src/prepass/prepass_io.wgsl (L95))
attachment. The custom deferred lighting pass plugin can then set [its
corresponding
depth](ec1465559f/crates/bevy_pbr/src/deferred/deferred_lighting.wgsl (L37)).
Then with the lighting pass using
[CompareFunction::Equal](ec1465559f/crates/bevy_pbr/src/deferred/mod.rs (L335)),
only the fragments with a depth that equal the corresponding depth
written in the material will be rendered.
Custom deferred lighting plugins can also be created to render the
StandardMaterial. The default deferred lighting plugin can be bypassed
with `DefaultPlugins.set(PBRDeferredLightingPlugin { bypass: true })`
---------
Co-authored-by: nickrart <nickolas.g.russell@gmail.com>
~~Currently blocked on an upstream bug that causes crashes when
minimizing/resizing on dx12 https://github.com/gfx-rs/wgpu/issues/3967~~
wgpu 0.17.1 is out which fixes it
# Objective
Keep wgpu up to date.
## Solution
Update wgpu and naga_oil.
Currently this depends on an unreleased (and unmerged) branch of
naga_oil, and hasn't been properly tested yet.
The wgpu side of this seems to have been an extremely trivial upgrade
(all the upgrade work seems to be in naga_oil). This also lets us remove
the workarounds for pack/unpack4x8unorm in the SSAO shaders.
Lets us close the dx12 part of
https://github.com/bevyengine/bevy/issues/8888
related: https://github.com/bevyengine/bevy/issues/9304
---
## Changelog
Update to wgpu 0.17 and naga_oil 0.9
# Objective
- This PR aims to make creating meshes a little bit more ergonomic,
specifically by removing the need for intermediate mutable variables.
## Solution
- We add methods that consume the `Mesh` and return a mesh with the
specified changes, so that meshes can be entirely constructed via
builder-style calls, without intermediate variables;
- Methods are flagged with `#[must_use]` to ensure proper use;
- Examples are updated to use the new methods where applicable. Some
examples are kept with the mutating methods so that users can still
easily discover them, and also where the new methods wouldn't really be
an improvement.
## Examples
Before:
```rust
let mut mesh = Mesh::new(PrimitiveTopology::TriangleList);
mesh.insert_attribute(Mesh::ATTRIBUTE_POSITION, vs);
mesh.insert_attribute(Mesh::ATTRIBUTE_NORMAL, vns);
mesh.insert_attribute(Mesh::ATTRIBUTE_UV_0, vts);
mesh.set_indices(Some(Indices::U32(tris)));
mesh
```
After:
```rust
Mesh::new(PrimitiveTopology::TriangleList)
.with_inserted_attribute(Mesh::ATTRIBUTE_POSITION, vs)
.with_inserted_attribute(Mesh::ATTRIBUTE_NORMAL, vns)
.with_inserted_attribute(Mesh::ATTRIBUTE_UV_0, vts)
.with_indices(Some(Indices::U32(tris)))
```
Before:
```rust
let mut cube = Mesh::from(shape::Cube { size: 1.0 });
cube.generate_tangents().unwrap();
PbrBundle {
mesh: meshes.add(cube),
..default()
}
```
After:
```rust
PbrBundle {
mesh: meshes.add(
Mesh::from(shape::Cube { size: 1.0 })
.with_generated_tangents()
.unwrap(),
),
..default()
}
```
---
## Changelog
- Added consuming builder methods for more ergonomic `Mesh` creation:
`with_inserted_attribute()`, `with_removed_attribute()`,
`with_indices()`, `with_duplicated_vertices()`,
`with_computed_flat_normals()`, `with_generated_tangents()`,
`with_morph_targets()`, `with_morph_target_names()`.
# Objective
Currently, the only way for custom components that participate in
rendering to opt into the higher-performance extraction method in #9903
is to implement the `RenderInstances` data structure and the extraction
logic manually. This is inconvenient compared to the `ExtractComponent`
API.
## Solution
This commit creates a new `RenderInstance` trait that mirrors the
existing `ExtractComponent` method but uses the higher-performance
approach that #9903 uses. Additionally, `RenderInstance` is more
flexible than `ExtractComponent`, because it can extract multiple
components at once. This makes high-performance rendering components
essentially as easy to write as the existing ones based on component
extraction.
---
## Changelog
### Added
A new `RenderInstance` trait is available mirroring `ExtractComponent`,
but using a higher-performance method to extract one or more components
to the render world. If you have custom components that rendering takes
into account, you may consider migration from `ExtractComponent` to
`RenderInstance` for higher performance.
# Objective
- Fixes#8140
## Solution
- Added Explicit Error Typing for `AssetLoader` and `AssetSaver`, which
were the last instances of `anyhow` in use across Bevy.
---
## Changelog
- Added an associated type `Error` to `AssetLoader` and `AssetSaver` for
use with the `load` and `save` methods respectively.
- Changed `ErasedAssetLoader` and `ErasedAssetSaver` `load` and `save`
methods to use `Box<dyn Error + Send + Sync + 'static>` to allow for
arbitrary `Error` types from the non-erased trait variants. Note the
strict requirements match the pre-existing requirements around
`anyhow::Error`.
## Migration Guide
- `anyhow` is no longer exported by `bevy_asset`; Add it to your own
project (if required).
- `AssetLoader` and `AssetSaver` have an associated type `Error`; Define
an appropriate error type (e.g., using `thiserror`), or use a pre-made
error type (e.g., `anyhow::Error`). Note that using `anyhow::Error` is a
drop-in replacement.
- `AssetLoaderError` has been removed; Define a new error type, or use
an alternative (e.g., `anyhow::Error`)
- All the first-party `AssetLoader`'s and `AssetSaver`'s now return
relevant (and narrow) error types instead of a single ambiguous type;
Match over the specific error type, or encapsulate (`Box<dyn>`,
`thiserror`, `anyhow`, etc.)
## Notes
A simpler PR to resolve this issue would simply define a Bevy `Error`
type defined as `Box<dyn std::error::Error + Send + Sync + 'static>`,
but I think this type of error handling should be discouraged when
possible. Since only 2 traits required the use of `anyhow`, it isn't a
substantive body of work to solidify these error types, and remove
`anyhow` entirely. End users are still encouraged to use `anyhow` if
that is their preferred error handling style. Arguably, adding the
`Error` associated type gives more freedom to end-users to decide
whether they want more or less explicit error handling (`anyhow` vs
`thiserror`).
As an aside, I didn't perform any testing on Android or WASM. CI passed
locally, but there may be mistakes for those platforms I missed.
# Objective
assets v2 broke custom shader imports. fix them
## Solution
store handles of any file dependencies in the `Shader` to avoid them
being immediately dropped.
also added a use into the `shader_material` example so that it'll be
harder to break support in future.
# Objective
- Updates for rust 1.73
## Solution
- new doc check for `redundant_explicit_links`
- updated to text for compile fail tests
---
## Changelog
- updates for rust 1.73
Conventionally, the second UV map (`TEXCOORD1`, `UV1`) is used for
lightmap UVs. This commit allows Bevy to import them, so that a custom
shader that applies lightmaps can use those UVs if desired.
Note that this doesn't actually apply lightmaps to Bevy meshes; that
will be a followup. It does, however, open the door to future Bevy
plugins that implement baked global illumination.
## Changelog
### Added
The Bevy glTF loader now imports a second UV channel (`TEXCOORD1`,
`UV1`) from meshes if present. This can be used by custom shaders to
implement lightmapping.
# Objective
- Handle suspend / resume events on Android without exiting
## Solution
- On suspend: despawn the window, and set the control flow to wait for
events from the OS
- On resume: spawn a new window, and set the control flow to poll
In this video, you can see the Android example being suspended, stopping
receiving events, and working again after being resumed
https://github.com/bevyengine/bevy/assets/8672791/aaaf4b09-ee6a-4a0d-87ad-41f05def7945
# Objective
- Fixes#4610
## Solution
- Replaced all instances of `parking_lot` locks with equivalents from
`std::sync`. Acquiring locks within `std::sync` can fail, so
`.expect("Lock Poisoned")` statements were added where required.
## Comments
In [this
comment](https://github.com/bevyengine/bevy/issues/4610#issuecomment-1592407881),
the lack of deadlock detection was mentioned as a potential reason to
not make this change. From what I can gather, Bevy doesn't appear to be
using this functionality within the engine. Unless it was expected that
a Bevy consumer was expected to enable and use this functionality, it
appears to be a feature lost without consequence.
Unfortunately, `cpal` and `wgpu` both still rely on `parking_lot`,
leaving it in the dependency graph even after this change.
From my basic experimentation, this change doesn't appear to have any
performance impacts, positive or negative. I tested this using
`bevymark` with 50,000 entities and observed 20ms of frame-time before
and after the change. More extensive testing with larger/real projects
should probably be done.
# Objective
- sometimes when bevy shuts down on certain machines the render thread
tries to send the time after the main world has been dropped.
- fixes an error mentioned in a reply in
https://github.com/bevyengine/bevy/issues/9543
---
## Changelog
- ignore disconnected errors from the time channel.
# Objective
- Improve rendering performance, particularly by avoiding the large
system commands costs of using the ECS in the way that the render world
does.
## Solution
- Define `EntityHasher` that calculates a hash from the
`Entity.to_bits()` by `i | (i.wrapping_mul(0x517cc1b727220a95) << 32)`.
`0x517cc1b727220a95` is something like `u64::MAX / N` for N that gives a
value close to π and that works well for hashing. Thanks for @SkiFire13
for the suggestion and to @nicopap for alternative suggestions and
discussion. This approach comes from `rustc-hash` (a.k.a. `FxHasher`)
with some tweaks for the case of hashing an `Entity`. `FxHasher` and
`SeaHasher` were also tested but were significantly slower.
- Define `EntityHashMap` type that uses the `EntityHashser`
- Use `EntityHashMap<Entity, T>` for render world entity storage,
including:
- `RenderMaterialInstances` - contains the `AssetId<M>` of the material
associated with the entity. Also for 2D.
- `RenderMeshInstances` - contains mesh transforms, flags and properties
about mesh entities. Also for 2D.
- `SkinIndices` and `MorphIndices` - contains the skin and morph index
for an entity, respectively
- `ExtractedSprites`
- `ExtractedUiNodes`
## Benchmarks
All benchmarks have been conducted on an M1 Max connected to AC power.
The tests are run for 1500 frames. The 1000th frame is captured for
comparison to check for visual regressions. There were none.
### 2D Meshes
`bevymark --benchmark --waves 160 --per-wave 1000 --mode mesh2d`
#### `--ordered-z`
This test spawns the 2D meshes with z incrementing back to front, which
is the ideal arrangement allocation order as it matches the sorted
render order which means lookups have a high cache hit rate.
<img width="1112" alt="Screenshot 2023-09-27 at 07 50 45"
src="https://github.com/bevyengine/bevy/assets/302146/e140bc98-7091-4a3b-8ae1-ab75d16d2ccb">
-39.1% median frame time.
#### Random
This test spawns the 2D meshes with random z. This not only makes the
batching and transparent 2D pass lookups get a lot of cache misses, it
also currently means that the meshes are almost certain to not be
batchable.
<img width="1108" alt="Screenshot 2023-09-27 at 07 51 28"
src="https://github.com/bevyengine/bevy/assets/302146/29c2e813-645a-43ce-982a-55df4bf7d8c4">
-7.2% median frame time.
### 3D Meshes
`many_cubes --benchmark`
<img width="1112" alt="Screenshot 2023-09-27 at 07 51 57"
src="https://github.com/bevyengine/bevy/assets/302146/1a729673-3254-4e2a-9072-55e27c69f0fc">
-7.7% median frame time.
### Sprites
**NOTE: On `main` sprites are using `SparseSet<Entity, T>`!**
`bevymark --benchmark --waves 160 --per-wave 1000 --mode sprite`
#### `--ordered-z`
This test spawns the sprites with z incrementing back to front, which is
the ideal arrangement allocation order as it matches the sorted render
order which means lookups have a high cache hit rate.
<img width="1116" alt="Screenshot 2023-09-27 at 07 52 31"
src="https://github.com/bevyengine/bevy/assets/302146/bc8eab90-e375-4d31-b5cd-f55f6f59ab67">
+13.0% median frame time.
#### Random
This test spawns the sprites with random z. This makes the batching and
transparent 2D pass lookups get a lot of cache misses.
<img width="1109" alt="Screenshot 2023-09-27 at 07 53 01"
src="https://github.com/bevyengine/bevy/assets/302146/22073f5d-99a7-49b0-9584-d3ac3eac3033">
+0.6% median frame time.
### UI
**NOTE: On `main` UI is using `SparseSet<Entity, T>`!**
`many_buttons`
<img width="1111" alt="Screenshot 2023-09-27 at 07 53 26"
src="https://github.com/bevyengine/bevy/assets/302146/66afd56d-cbe4-49e7-8b64-2f28f6043d85">
+15.1% median frame time.
## Alternatives
- Cart originally suggested trying out `SparseSet<Entity, T>` and indeed
that is slightly faster under ideal conditions. However,
`PassHashMap<Entity, T>` has better worst case performance when data is
randomly distributed, rather than in sorted render order, and does not
have the worst case memory usage that `SparseSet`'s dense `Vec<usize>`
that maps from the `Entity` index to sparse index into `Vec<T>`. This
dense `Vec` has to be as large as the largest Entity index used with the
`SparseSet`.
- I also tested `PassHashMap<u32, T>`, intending to use `Entity.index()`
as the key, but this proved to sometimes be slower and mostly no
different.
- The only outstanding approach that has not been implemented and tested
is to _not_ clear the render world of its entities each frame. That has
its own problems, though they could perhaps be solved.
- Performance-wise, if the entities and their component data were not
cleared, then they would incur table moves on spawn, and should not
thereafter, rather just their component data would be overwritten.
Ideally we would have a neat way of either updating data in-place via
`&mut T` queries, or inserting components if not present. This would
likely be quite cumbersome to have to remember to do everywhere, but
perhaps it only needs to be done in the more performance-sensitive
systems.
- The main problem to solve however is that we want to both maintain a
mapping between main world entities and render world entities, be able
to run the render app and world in parallel with the main app and world
for pipelined rendering, and at the same time be able to spawn entities
in the render world in such a way that those Entity ids do not collide
with those spawned in the main world. This is potentially quite
solvable, but could well be a lot of ECS work to do it in a way that
makes sense.
---
## Changelog
- Changed: Component data for entities to be drawn are no longer stored
on entities in the render world. Instead, data is stored in a
`EntityHashMap<Entity, T>` in various resources. This brings significant
performance benefits due to the way the render app clears entities every
frame. Resources of most interest are `RenderMeshInstances` and
`RenderMaterialInstances`, and their 2D counterparts.
## Migration Guide
Previously the render app extracted mesh entities and their component
data from the main world and stored them as entities and components in
the render world. Now they are extracted into essentially
`EntityHashMap<Entity, T>` where `T` are structs containing an
appropriate group of data. This means that while extract set systems
will continue to run extract queries against the main world they will
store their data in hash maps. Also, systems in later sets will either
need to look up entities in the available resources such as
`RenderMeshInstances`, or maintain their own `EntityHashMap<Entity, T>`
for their own data.
Before:
```rust
fn queue_custom(
material_meshes: Query<(Entity, &MeshTransforms, &Handle<Mesh>), With<InstanceMaterialData>>,
) {
...
for (entity, mesh_transforms, mesh_handle) in &material_meshes {
...
}
}
```
After:
```rust
fn queue_custom(
render_mesh_instances: Res<RenderMeshInstances>,
instance_entities: Query<Entity, With<InstanceMaterialData>>,
) {
...
for entity in &instance_entities {
let Some(mesh_instance) = render_mesh_instances.get(&entity) else { continue; };
// The mesh handle in `AssetId<Mesh>` form, and the `MeshTransforms` can now
// be found in `mesh_instance` which is a `RenderMeshInstance`
...
}
}
```
---------
Co-authored-by: robtfm <50659922+robtfm@users.noreply.github.com>
This is a duplicate of #9632, it was created since I forgot to make a
new branch when I first made this PR, so I was having trouble resolving
merge conflicts, meaning I had to rebuild my PR.
# Objective
- Allow other plugins to create the renderer resources. An example of
where this would be required is my [OpenXR
plugin](https://github.com/awtterpip/bevy_openxr)
## Solution
- Changed the bevy RenderPlugin to optionally take precreated render
resources instead of a configuration.
## Migration Guide
The `RenderPlugin` now takes a `RenderCreation` enum instead of
`WgpuSettings`. `RenderSettings::default()` returns
`RenderSettings::Automatic(WgpuSettings::default())`. `RenderSettings`
also implements `From<WgpuSettings>`.
```rust
// before
RenderPlugin {
wgpu_settings: WgpuSettings {
...
},
}
// now
RenderPlugin {
render_creation: RenderCreation::Automatic(WgpuSettings {
...
}),
}
// or
RenderPlugin {
render_creation: WgpuSettings {
...
}.into(),
}
```
---------
Co-authored-by: Malek <pocmalek@gmail.com>
Co-authored-by: Robert Swain <robert.swain@gmail.com>
# Objective
This is a minimally disruptive version of #8340. I attempted to update
it, but failed due to the scope of the changes added in #8204.
Fixes#8307. Partially addresses #4642. As seen in
https://github.com/bevyengine/bevy/issues/8284, we're actually copying
data twice in Prepare stage systems. Once into a CPU-side intermediate
scratch buffer, and once again into a mapped buffer. This is inefficient
and effectively doubles the time spent and memory allocated to run these
systems.
## Solution
Skip the scratch buffer entirely and use
`wgpu::Queue::write_buffer_with` to directly write data into mapped
buffers.
Separately, this also directly uses
`wgpu::Limits::min_uniform_buffer_offset_alignment` to set up the
alignment when writing to the buffers. Partially addressing the issue
raised in #4642.
Storage buffers and the abstractions built on top of
`DynamicUniformBuffer` will need to come in followup PRs.
This may not have a noticeable performance difference in this PR, as the
only first-party systems affected by this are view related, and likely
are not going to be particularly heavy.
---
## Changelog
Added: `DynamicUniformBuffer::get_writer`.
Added: `DynamicUniformBufferWriter`.
# Objective
- Implement the foundations of automatic batching/instancing of draw
commands as the next step from #89
- NOTE: More performance improvements will come when more data is
managed and bound in ways that do not require rebinding such as mesh,
material, and texture data.
## Solution
- The core idea for batching of draw commands is to check whether any of
the information that has to be passed when encoding a draw command
changes between two things that are being drawn according to the sorted
render phase order. These should be things like the pipeline, bind
groups and their dynamic offsets, index/vertex buffers, and so on.
- The following assumptions have been made:
- Only entities with prepared assets (pipelines, materials, meshes) are
queued to phases
- View bindings are constant across a phase for a given draw function as
phases are per-view
- `batch_and_prepare_render_phase` is the only system that performs this
batching and has sole responsibility for preparing the per-object data.
As such the mesh binding and dynamic offsets are assumed to only vary as
a result of the `batch_and_prepare_render_phase` system, e.g. due to
having to split data across separate uniform bindings within the same
buffer due to the maximum uniform buffer binding size.
- Implement `GpuArrayBuffer` for `Mesh2dUniform` to store Mesh2dUniform
in arrays in GPU buffers rather than each one being at a dynamic offset
in a uniform buffer. This is the same optimisation that was made for 3D
not long ago.
- Change batch size for a range in `PhaseItem`, adding API for getting
or mutating the range. This is more flexible than a size as the length
of the range can be used in place of the size, but the start and end can
be otherwise whatever is needed.
- Add an optional mesh bind group dynamic offset to `PhaseItem`. This
avoids having to do a massive table move just to insert
`GpuArrayBufferIndex` components.
## Benchmarks
All tests have been run on an M1 Max on AC power. `bevymark` and
`many_cubes` were modified to use 1920x1080 with a scale factor of 1. I
run a script that runs a separate Tracy capture process, and then runs
the bevy example with `--features bevy_ci_testing,trace_tracy` and
`CI_TESTING_CONFIG=../benchmark.ron` with the contents of
`../benchmark.ron`:
```rust
(
exit_after: Some(1500)
)
```
...in order to run each test for 1500 frames.
The recent changes to `many_cubes` and `bevymark` added reproducible
random number generation so that with the same settings, the same rng
will occur. They also added benchmark modes that use a fixed delta time
for animations. Combined this means that the same frames should be
rendered both on main and on the branch.
The graphs compare main (yellow) to this PR (red).
### 3D Mesh `many_cubes --benchmark`
<img width="1411" alt="Screenshot 2023-09-03 at 23 42 10"
src="https://github.com/bevyengine/bevy/assets/302146/2088716a-c918-486c-8129-090b26fd2bc4">
The mesh and material are the same for all instances. This is basically
the best case for the initial batching implementation as it results in 1
draw for the ~11.7k visible meshes. It gives a ~30% reduction in median
frame time.
The 1000th frame is identical using the flip tool:
```
Mean: 0.000000
Weighted median: 0.000000
1st weighted quartile: 0.000000
3rd weighted quartile: 0.000000
Min: 0.000000
Max: 0.000000
Evaluation time: 0.4615 seconds
```
### 3D Mesh `many_cubes --benchmark --material-texture-count 10`
<img width="1404" alt="Screenshot 2023-09-03 at 23 45 18"
src="https://github.com/bevyengine/bevy/assets/302146/5ee9c447-5bd2-45c6-9706-ac5ff8916daf">
This run uses 10 different materials by varying their textures. The
materials are randomly selected, and there is no sorting by material
bind group for opaque 3D so any batching is 'random'. The PR produces a
~5% reduction in median frame time. If we were to sort the opaque phase
by the material bind group, then this should be a lot faster. This
produces about 10.5k draws for the 11.7k visible entities. This makes
sense as randomly selecting from 10 materials gives a chance that two
adjacent entities randomly select the same material and can be batched.
The 1000th frame is identical in flip:
```
Mean: 0.000000
Weighted median: 0.000000
1st weighted quartile: 0.000000
3rd weighted quartile: 0.000000
Min: 0.000000
Max: 0.000000
Evaluation time: 0.4537 seconds
```
### 3D Mesh `many_cubes --benchmark --vary-per-instance`
<img width="1394" alt="Screenshot 2023-09-03 at 23 48 44"
src="https://github.com/bevyengine/bevy/assets/302146/f02a816b-a444-4c18-a96a-63b5436f3b7f">
This run varies the material data per instance by randomly-generating
its colour. This is the worst case for batching and that it performs
about the same as `main` is a good thing as it demonstrates that the
batching has minimal overhead when dealing with ~11k visible mesh
entities.
The 1000th frame is identical according to flip:
```
Mean: 0.000000
Weighted median: 0.000000
1st weighted quartile: 0.000000
3rd weighted quartile: 0.000000
Min: 0.000000
Max: 0.000000
Evaluation time: 0.4568 seconds
```
### 2D Mesh `bevymark --benchmark --waves 160 --per-wave 1000 --mode
mesh2d`
<img width="1412" alt="Screenshot 2023-09-03 at 23 59 56"
src="https://github.com/bevyengine/bevy/assets/302146/cb02ae07-237b-4646-ae9f-fda4dafcbad4">
This spawns 160 waves of 1000 quad meshes that are shaded with
ColorMaterial. Each wave has a different material so 160 waves currently
should result in 160 batches. This results in a 50% reduction in median
frame time.
Capturing a screenshot of the 1000th frame main vs PR gives:
```
Mean: 0.001222
Weighted median: 0.750432
1st weighted quartile: 0.453494
3rd weighted quartile: 0.969758
Min: 0.000000
Max: 0.990296
Evaluation time: 0.4255 seconds
```
So they seem to produce the same results. I also double-checked the
number of draws. `main` does 160000 draws, and the PR does 160, as
expected.
### 2D Mesh `bevymark --benchmark --waves 160 --per-wave 1000 --mode
mesh2d --material-texture-count 10`
<img width="1392" alt="Screenshot 2023-09-04 at 00 09 22"
src="https://github.com/bevyengine/bevy/assets/302146/4358da2e-ce32-4134-82df-3ab74c40849c">
This generates 10 textures and generates materials for each of those and
then selects one material per wave. The median frame time is reduced by
50%. Similar to the plain run above, this produces 160 draws on the PR
and 160000 on `main` and the 1000th frame is identical (ignoring the fps
counter text overlay).
```
Mean: 0.002877
Weighted median: 0.964980
1st weighted quartile: 0.668871
3rd weighted quartile: 0.982749
Min: 0.000000
Max: 0.992377
Evaluation time: 0.4301 seconds
```
### 2D Mesh `bevymark --benchmark --waves 160 --per-wave 1000 --mode
mesh2d --vary-per-instance`
<img width="1396" alt="Screenshot 2023-09-04 at 00 13 53"
src="https://github.com/bevyengine/bevy/assets/302146/b2198b18-3439-47ad-919a-cdabe190facb">
This creates unique materials per instance by randomly-generating the
material's colour. This is the worst case for 2D batching. Somehow, this
PR manages a 7% reduction in median frame time. Both main and this PR
issue 160000 draws.
The 1000th frame is the same:
```
Mean: 0.001214
Weighted median: 0.937499
1st weighted quartile: 0.635467
3rd weighted quartile: 0.979085
Min: 0.000000
Max: 0.988971
Evaluation time: 0.4462 seconds
```
### 2D Sprite `bevymark --benchmark --waves 160 --per-wave 1000 --mode
sprite`
<img width="1396" alt="Screenshot 2023-09-04 at 12 21 12"
src="https://github.com/bevyengine/bevy/assets/302146/8b31e915-d6be-4cac-abf5-c6a4da9c3d43">
This just spawns 160 waves of 1000 sprites. There should be and is no
notable difference between main and the PR.
### 2D Sprite `bevymark --benchmark --waves 160 --per-wave 1000 --mode
sprite --material-texture-count 10`
<img width="1389" alt="Screenshot 2023-09-04 at 12 36 08"
src="https://github.com/bevyengine/bevy/assets/302146/45fe8d6d-c901-4062-a349-3693dd044413">
This spawns the sprites selecting a texture at random per instance from
the 10 generated textures. This has no significant change vs main and
shouldn't.
### 2D Sprite `bevymark --benchmark --waves 160 --per-wave 1000 --mode
sprite --vary-per-instance`
<img width="1401" alt="Screenshot 2023-09-04 at 12 29 52"
src="https://github.com/bevyengine/bevy/assets/302146/762c5c60-352e-471f-8dbe-bbf10e24ebd6">
This sets the sprite colour as being unique per instance. This can still
all be drawn using one batch. There should be no difference but the PR
produces median frame times that are 4% higher. Investigation showed no
clear sources of cost, rather a mix of give and take that should not
happen. It seems like noise in the results.
### Summary
| Benchmark | % change in median frame time |
| ------------- | ------------- |
| many_cubes | 🟩 -30% |
| many_cubes 10 materials | 🟩 -5% |
| many_cubes unique materials | 🟩 ~0% |
| bevymark mesh2d | 🟩 -50% |
| bevymark mesh2d 10 materials | 🟩 -50% |
| bevymark mesh2d unique materials | 🟩 -7% |
| bevymark sprite | 🟥 2% |
| bevymark sprite 10 materials | 🟥 0.6% |
| bevymark sprite unique materials | 🟥 4.1% |
---
## Changelog
- Added: 2D and 3D mesh entities that share the same mesh and material
(same textures, same data) are now batched into the same draw command
for better performance.
---------
Co-authored-by: robtfm <50659922+robtfm@users.noreply.github.com>
Co-authored-by: Nicola Papale <nico@nicopap.ch>
# Objective
- Fixes#9876
## Solution
- Reverted commit `5012a0fd57748ab6f146776368b4cf988bba1eaa` to restore
the previous default values for `OrthographicProjection`.
---
## Migration Guide
- Migration guide steps from #9537 should be removed for next release.
# Objective
- When adding/removing bindings in large binding lists, git would
generate very difficult-to-read diffs
## Solution
- Move the `@group(X) @binding(Y)` into the same line as the binding
type declaration
# Objective
- `check_visibility` system in `bevy_render` had an
`Option<&NoFrustumCulling>` that could be replaced by `Has`, which is
theoretically faster and semantically more correct.
- It also had some awkward indenting due to very large closure argument
lists.
- Some of the tests could be written more concisely
## Solution
Use `Has`, move the tuple destructuring in a `let` binding, create a
function for the tests.
## Note to reviewers
Enable the "no white space diff" in the diff viewer to have a more
meaningful diff in the `check_visibility` system.
In the "Files changed" view, click on the little cog right of the "Jump
to" text, on the row where the "Review changes" button is. then enable
the "Hide whitespace" checkbox and click reload.
---
## Migration Guide
- The `check_visibility` system's `Option<&NoFrustumCulling>` parameter
has been replaced by `Has<NoFrustumCulling>`, if you were calling it
manually, you should change the type to match it
---------
Co-authored-by: Rob Parrett <robparrett@gmail.com>
# Objective
- When initializing the renderer, Bevy currently create a detached task
- This is needed on wasm but not on native
## Solution
- Don't create a detached task on native but block on the future
# Objective
Replace instances of
```rust
for x in collection.iter{_mut}() {
```
with
```rust
for x in &{mut} collection {
```
This also changes CI to no longer suppress this lint. Note that since
this lint only shows up when using clippy in pedantic mode, it was
probably unnecessary to suppress this lint in the first place.
# Objective
mikktspace tangent generation requires mesh indices, and currently fails
when they are not present. we can just generate them instead.
## Solution
generate the indices.
# Objective
- I want to associate `TypeData` with `Mesh`, to make it
editable/inspectable in my reflection-based editor. `Mesh` has to
implement `Reflect` for that. The precise reflection behavior does not
matter.
## Solution
- `#[derive(Reflect)]`, ignore fields whose types aren't reflectable.
- Call `App::register_asset_reflect` in the `MeshPlugin`.
---
## Changelog
- `Mesh` now implements `Reflect`.
# Bevy Asset V2 Proposal
## Why Does Bevy Need A New Asset System?
Asset pipelines are a central part of the gamedev process. Bevy's
current asset system is missing a number of features that make it
non-viable for many classes of gamedev. After plenty of discussions and
[a long community feedback
period](https://github.com/bevyengine/bevy/discussions/3972), we've
identified a number missing features:
* **Asset Preprocessing**: it should be possible to "preprocess" /
"compile" / "crunch" assets at "development time" rather than when the
game starts up. This enables offloading expensive work from deployed
apps, faster asset loading, less runtime memory usage, etc.
* **Per-Asset Loader Settings**: Individual assets cannot define their
own loaders that override the defaults. Additionally, they cannot
provide per-asset settings to their loaders. This is a huge limitation,
as many asset types don't provide all information necessary for Bevy
_inside_ the asset. For example, a raw PNG image says nothing about how
it should be sampled (ex: linear vs nearest).
* **Asset `.meta` files**: assets should have configuration files stored
adjacent to the asset in question, which allows the user to configure
asset-type-specific settings. These settings should be accessible during
the pre-processing phase. Modifying a `.meta` file should trigger a
re-processing / re-load of the asset. It should be possible to configure
asset loaders from the meta file.
* **Processed Asset Hot Reloading**: Changes to processed assets (or
their dependencies) should result in re-processing them and re-loading
the results in live Bevy Apps.
* **Asset Dependency Tracking**: The current bevy_asset has no good way
to wait for asset dependencies to load. It punts this as an exercise for
consumers of the loader apis, which is unreasonable and error prone.
There should be easy, ergonomic ways to wait for assets to load and
block some logic on an asset's entire dependency tree loading.
* **Runtime Asset Loading**: it should be (optionally) possible to load
arbitrary assets dynamically at runtime. This necessitates being able to
deploy and run the asset server alongside Bevy Apps on _all platforms_.
For example, we should be able to invoke the shader compiler at runtime,
stream scenes from sources like the internet, etc. To keep deployed
binaries (and startup times) small, the runtime asset server
configuration should be configurable with different settings compared to
the "pre processor asset server".
* **Multiple Backends**: It should be possible to load assets from
arbitrary sources (filesystems, the internet, remote asset serves, etc).
* **Asset Packing**: It should be possible to deploy assets in
compressed "packs", which makes it easier and more efficient to
distribute assets with Bevy Apps.
* **Asset Handoff**: It should be possible to hold a "live" asset
handle, which correlates to runtime data, without actually holding the
asset in memory. Ex: it must be possible to hold a reference to a GPU
mesh generated from a "mesh asset" without keeping the mesh data in CPU
memory
* **Per-Platform Processed Assets**: Different platforms and app
distributions have different capabilities and requirements. Some
platforms need lower asset resolutions or different asset formats to
operate within the hardware constraints of the platform. It should be
possible to define per-platform asset processing profiles. And it should
be possible to deploy only the assets required for a given platform.
These features have architectural implications that are significant
enough to require a full rewrite. The current Bevy Asset implementation
got us this far, but it can take us no farther. This PR defines a brand
new asset system that implements most of these features, while laying
the foundations for the remaining features to be built.
## Bevy Asset V2
Here is a quick overview of the features introduced in this PR.
* **Asset Preprocessing**: Preprocess assets at development time into
more efficient (and configurable) representations
* **Dependency Aware**: Dependencies required to process an asset are
tracked. If an asset's processed dependency changes, it will be
reprocessed
* **Hot Reprocessing/Reloading**: detect changes to asset source files,
reprocess them if they have changed, and then hot-reload them in Bevy
Apps.
* **Only Process Changes**: Assets are only re-processed when their
source file (or meta file) has changed. This uses hashing and timestamps
to avoid processing assets that haven't changed.
* **Transactional and Reliable**: Uses write-ahead logging (a technique
commonly used by databases) to recover from crashes / forced-exits.
Whenever possible it avoids full-reprocessing / only uncompleted
transactions will be reprocessed. When the processor is running in
parallel with a Bevy App, processor asset writes block Bevy App asset
reads. Reading metadata + asset bytes is guaranteed to be transactional
/ correctly paired.
* **Portable / Run anywhere / Database-free**: The processor does not
rely on an in-memory database (although it uses some database techniques
for reliability). This is important because pretty much all in-memory
databases have unsupported platforms or build complications.
* **Configure Processor Defaults Per File Type**: You can say "use this
processor for all files of this type".
* **Custom Processors**: The `Processor` trait is flexible and
unopinionated. It can be implemented by downstream plugins.
* **LoadAndSave Processors**: Most asset processing scenarios can be
expressed as "run AssetLoader A, save the results using AssetSaver X,
and then load the result using AssetLoader B". For example, load this
png image using `PngImageLoader`, which produces an `Image` asset and
then save it using `CompressedImageSaver` (which also produces an
`Image` asset, but in a compressed format), which takes an `Image` asset
as input. This means if you have an `AssetLoader` for an asset, you are
already half way there! It also means that you can share AssetSavers
across multiple loaders. Because `CompressedImageSaver` accepts Bevy's
generic Image asset as input, it means you can also use it with some
future `JpegImageLoader`.
* **Loader and Saver Settings**: Asset Loaders and Savers can now define
their own settings types, which are passed in as input when an asset is
loaded / saved. Each asset can define its own settings.
* **Asset `.meta` files**: configure asset loaders, their settings,
enable/disable processing, and configure processor settings
* **Runtime Asset Dependency Tracking** Runtime asset dependencies (ex:
if an asset contains a `Handle<Image>`) are tracked by the asset server.
An event is emitted when an asset and all of its dependencies have been
loaded
* **Unprocessed Asset Loading**: Assets do not require preprocessing.
They can be loaded directly. A processed asset is just a "normal" asset
with some extra metadata. Asset Loaders don't need to know or care about
whether or not an asset was processed.
* **Async Asset IO**: Asset readers/writers use async non-blocking
interfaces. Note that because Rust doesn't yet support async traits,
there is a bit of manual Boxing / Future boilerplate. This will
hopefully be removed in the near future when Rust gets async traits.
* **Pluggable Asset Readers and Writers**: Arbitrary asset source
readers/writers are supported, both by the processor and the asset
server.
* **Better Asset Handles**
* **Single Arc Tree**: Asset Handles now use a single arc tree that
represents the lifetime of the asset. This makes their implementation
simpler, more efficient, and allows us to cheaply attach metadata to
handles. Ex: the AssetPath of a handle is now directly accessible on the
handle itself!
* **Const Typed Handles**: typed handles can be constructed in a const
context. No more weird "const untyped converted to typed at runtime"
patterns!
* **Handles and Ids are Smaller / Faster To Hash / Compare**: Typed
`Handle<T>` is now much smaller in memory and `AssetId<T>` is even
smaller.
* **Weak Handle Usage Reduction**: In general Handles are now considered
to be "strong". Bevy features that previously used "weak `Handle<T>`"
have been ported to `AssetId<T>`, which makes it statically clear that
the features do not hold strong handles (while retaining strong type
information). Currently Handle::Weak still exists, but it is very
possible that we can remove that entirely.
* **Efficient / Dense Asset Ids**: Assets now have efficient dense
runtime asset ids, which means we can avoid expensive hash lookups.
Assets are stored in Vecs instead of HashMaps. There are now typed and
untyped ids, which means we no longer need to store dynamic type
information in the ID for typed handles. "AssetPathId" (which was a
nightmare from a performance and correctness standpoint) has been
entirely removed in favor of dense ids (which are retrieved for a path
on load)
* **Direct Asset Loading, with Dependency Tracking**: Assets that are
defined at runtime can still have their dependencies tracked by the
Asset Server (ex: if you create a material at runtime, you can still
wait for its textures to load). This is accomplished via the (currently
optional) "asset dependency visitor" trait. This system can also be used
to define a set of assets to load, then wait for those assets to load.
* **Async folder loading**: Folder loading also uses this system and
immediately returns a handle to the LoadedFolder asset, which means
folder loading no longer blocks on directory traversals.
* **Improved Loader Interface**: Loaders now have a specific "top level
asset type", which makes returning the top-level asset simpler and
statically typed.
* **Basic Image Settings and Processing**: Image assets can now be
processed into the gpu-friendly Basic Universal format. The ImageLoader
now has a setting to define what format the image should be loaded as.
Note that this is just a minimal MVP ... plenty of additional work to do
here. To demo this, enable the `basis-universal` feature and turn on
asset processing.
* **Simpler Audio Play / AudioSink API**: Asset handle providers are
cloneable, which means the Audio resource can mint its own handles. This
means you can now do `let sink_handle = audio.play(music)` instead of
`let sink_handle = audio_sinks.get_handle(audio.play(music))`. Note that
this might still be replaced by
https://github.com/bevyengine/bevy/pull/8424.
**Removed Handle Casting From Engine Features**: Ex: FontAtlases no
longer use casting between handle types
## Using The New Asset System
### Normal Unprocessed Asset Loading
By default the `AssetPlugin` does not use processing. It behaves pretty
much the same way as the old system.
If you are defining a custom asset, first derive `Asset`:
```rust
#[derive(Asset)]
struct Thing {
value: String,
}
```
Initialize the asset:
```rust
app.init_asset:<Thing>()
```
Implement a new `AssetLoader` for it:
```rust
#[derive(Default)]
struct ThingLoader;
#[derive(Serialize, Deserialize, Default)]
pub struct ThingSettings {
some_setting: bool,
}
impl AssetLoader for ThingLoader {
type Asset = Thing;
type Settings = ThingSettings;
fn load<'a>(
&'a self,
reader: &'a mut Reader,
settings: &'a ThingSettings,
load_context: &'a mut LoadContext,
) -> BoxedFuture<'a, Result<Thing, anyhow::Error>> {
Box::pin(async move {
let mut bytes = Vec::new();
reader.read_to_end(&mut bytes).await?;
// convert bytes to value somehow
Ok(Thing {
value
})
})
}
fn extensions(&self) -> &[&str] {
&["thing"]
}
}
```
Note that this interface will get much cleaner once Rust gets support
for async traits. `Reader` is an async futures_io::AsyncRead. You can
stream bytes as they come in or read them all into a `Vec<u8>`,
depending on the context. You can use `let handle =
load_context.load(path)` to kick off a dependency load, retrieve a
handle, and register the dependency for the asset.
Then just register the loader in your Bevy app:
```rust
app.init_asset_loader::<ThingLoader>()
```
Now just add your `Thing` asset files into the `assets` folder and load
them like this:
```rust
fn system(asset_server: Res<AssetServer>) {
let handle = Handle<Thing> = asset_server.load("cool.thing");
}
```
You can check load states directly via the asset server:
```rust
if asset_server.load_state(&handle) == LoadState::Loaded { }
```
You can also listen for events:
```rust
fn system(mut events: EventReader<AssetEvent<Thing>>, handle: Res<SomeThingHandle>) {
for event in events.iter() {
if event.is_loaded_with_dependencies(&handle) {
}
}
}
```
Note the new `AssetEvent::LoadedWithDependencies`, which only fires when
the asset is loaded _and_ all dependencies (and their dependencies) have
loaded.
Unlike the old asset system, for a given asset path all `Handle<T>`
values point to the same underlying Arc. This means Handles can cheaply
hold more asset information, such as the AssetPath:
```rust
// prints the AssetPath of the handle
info!("{:?}", handle.path())
```
### Processed Assets
Asset processing can be enabled via the `AssetPlugin`. When developing
Bevy Apps with processed assets, do this:
```rust
app.add_plugins(DefaultPlugins.set(AssetPlugin::processed_dev()))
```
This runs the `AssetProcessor` in the background with hot-reloading. It
reads assets from the `assets` folder, processes them, and writes them
to the `.imported_assets` folder. Asset loads in the Bevy App will wait
for a processed version of the asset to become available. If an asset in
the `assets` folder changes, it will be reprocessed and hot-reloaded in
the Bevy App.
When deploying processed Bevy apps, do this:
```rust
app.add_plugins(DefaultPlugins.set(AssetPlugin::processed()))
```
This does not run the `AssetProcessor` in the background. It behaves
like `AssetPlugin::unprocessed()`, but reads assets from
`.imported_assets`.
When the `AssetProcessor` is running, it will populate sibling `.meta`
files for assets in the `assets` folder. Meta files for assets that do
not have a processor configured look like this:
```rust
(
meta_format_version: "1.0",
asset: Load(
loader: "bevy_render::texture::image_loader::ImageLoader",
settings: (
format: FromExtension,
),
),
)
```
This is metadata for an image asset. For example, if you have
`assets/my_sprite.png`, this could be the metadata stored at
`assets/my_sprite.png.meta`. Meta files are totally optional. If no
metadata exists, the default settings will be used.
In short, this file says "load this asset with the ImageLoader and use
the file extension to determine the image type". This type of meta file
is supported in all AssetPlugin modes. If in `Unprocessed` mode, the
asset (with the meta settings) will be loaded directly. If in
`ProcessedDev` mode, the asset file will be copied directly to the
`.imported_assets` folder. The meta will also be copied directly to the
`.imported_assets` folder, but with one addition:
```rust
(
meta_format_version: "1.0",
processed_info: Some((
hash: 12415480888597742505,
full_hash: 14344495437905856884,
process_dependencies: [],
)),
asset: Load(
loader: "bevy_render::texture::image_loader::ImageLoader",
settings: (
format: FromExtension,
),
),
)
```
`processed_info` contains `hash` (a direct hash of the asset and meta
bytes), `full_hash` (a hash of `hash` and the hashes of all
`process_dependencies`), and `process_dependencies` (the `path` and
`full_hash` of every process_dependency). A "process dependency" is an
asset dependency that is _directly_ used when processing the asset.
Images do not have process dependencies, so this is empty.
When the processor is enabled, you can use the `Process` metadata
config:
```rust
(
meta_format_version: "1.0",
asset: Process(
processor: "bevy_asset::processor::process::LoadAndSave<bevy_render::texture::image_loader::ImageLoader, bevy_render::texture::compressed_image_saver::CompressedImageSaver>",
settings: (
loader_settings: (
format: FromExtension,
),
saver_settings: (
generate_mipmaps: true,
),
),
),
)
```
This configures the asset to use the `LoadAndSave` processor, which runs
an AssetLoader and feeds the result into an AssetSaver (which saves the
given Asset and defines a loader to load it with). (for terseness
LoadAndSave will likely get a shorter/friendlier type name when [Stable
Type Paths](#7184) lands). `LoadAndSave` is likely to be the most common
processor type, but arbitrary processors are supported.
`CompressedImageSaver` saves an `Image` in the Basis Universal format
and configures the ImageLoader to load it as basis universal. The
`AssetProcessor` will read this meta, run it through the LoadAndSave
processor, and write the basis-universal version of the image to
`.imported_assets`. The final metadata will look like this:
```rust
(
meta_format_version: "1.0",
processed_info: Some((
hash: 905599590923828066,
full_hash: 9948823010183819117,
process_dependencies: [],
)),
asset: Load(
loader: "bevy_render::texture::image_loader::ImageLoader",
settings: (
format: Format(Basis),
),
),
)
```
To try basis-universal processing out in Bevy examples, (for example
`sprite.rs`), change `add_plugins(DefaultPlugins)` to
`add_plugins(DefaultPlugins.set(AssetPlugin::processed_dev()))` and run
with the `basis-universal` feature enabled: `cargo run
--features=basis-universal --example sprite`.
To create a custom processor, there are two main paths:
1. Use the `LoadAndSave` processor with an existing `AssetLoader`.
Implement the `AssetSaver` trait, register the processor using
`asset_processor.register_processor::<LoadAndSave<ImageLoader,
CompressedImageSaver>>(image_saver.into())`.
2. Implement the `Process` trait directly and register it using:
`asset_processor.register_processor(thing_processor)`.
You can configure default processors for file extensions like this:
```rust
asset_processor.set_default_processor::<ThingProcessor>("thing")
```
There is one more metadata type to be aware of:
```rust
(
meta_format_version: "1.0",
asset: Ignore,
)
```
This will ignore the asset during processing / prevent it from being
written to `.imported_assets`.
The AssetProcessor stores a transaction log at `.imported_assets/log`
and uses it to gracefully recover from unexpected stops. This means you
can force-quit the processor (and Bevy Apps running the processor in
parallel) at arbitrary times!
`.imported_assets` is "local state". It should _not_ be checked into
source control. It should also be considered "read only". In practice,
you _can_ modify processed assets and processed metadata if you really
need to test something. But those modifications will not be represented
in the hashes of the assets, so the processed state will be "out of
sync" with the source assets. The processor _will not_ fix this for you.
Either revert the change after you have tested it, or delete the
processed files so they can be re-populated.
## Open Questions
There are a number of open questions to be discussed. We should decide
if they need to be addressed in this PR and if so, how we will address
them:
### Implied Dependencies vs Dependency Enumeration
There are currently two ways to populate asset dependencies:
* **Implied via AssetLoaders**: if an AssetLoader loads an asset (and
retrieves a handle), a dependency is added to the list.
* **Explicit via the optional Asset::visit_dependencies**: if
`server.load_asset(my_asset)` is called, it will call
`my_asset.visit_dependencies`, which will grab dependencies that have
been manually defined for the asset via the Asset trait impl (which can
be derived).
This means that defining explicit dependencies is optional for "loaded
assets". And the list of dependencies is always accurate because loaders
can only produce Handles if they register dependencies. If an asset was
loaded with an AssetLoader, it only uses the implied dependencies. If an
asset was created at runtime and added with
`asset_server.load_asset(MyAsset)`, it will use
`Asset::visit_dependencies`.
However this can create a behavior mismatch between loaded assets and
equivalent "created at runtime" assets if `Assets::visit_dependencies`
doesn't exactly match the dependencies produced by the AssetLoader. This
behavior mismatch can be resolved by completely removing "implied loader
dependencies" and requiring `Asset::visit_dependencies` to supply
dependency data. But this creates two problems:
* It makes defining loaded assets harder and more error prone: Devs must
remember to manually annotate asset dependencies with `#[dependency]`
when deriving `Asset`. For more complicated assets (such as scenes), the
derive likely wouldn't be sufficient and a manual `visit_dependencies`
impl would be required.
* Removes the ability to immediately kick off dependency loads: When
AssetLoaders retrieve a Handle, they also immediately kick off an asset
load for the handle, which means it can start loading in parallel
_before_ the asset finishes loading. For large assets, this could be
significant. (although this could be mitigated for processed assets if
we store dependencies in the processed meta file and load them ahead of
time)
### Eager ProcessorDev Asset Loading
I made a controversial call in the interest of fast startup times ("time
to first pixel") for the "processor dev mode configuration". When
initializing the AssetProcessor, current processed versions of unchanged
assets are yielded immediately, even if their dependencies haven't been
checked yet for reprocessing. This means that
non-current-state-of-filesystem-but-previously-valid assets might be
returned to the App first, then hot-reloaded if/when their dependencies
change and the asset is reprocessed.
Is this behavior desirable? There is largely one alternative: do not
yield an asset from the processor to the app until all of its
dependencies have been checked for changes. In some common cases (load
dependency has not changed since last run) this will increase startup
time. The main question is "by how much" and is that slower startup time
worth it in the interest of only yielding assets that are true to the
current state of the filesystem. Should this be configurable? I'm
starting to think we should only yield an asset after its (historical)
dependencies have been checked for changes + processed as necessary, but
I'm curious what you all think.
### Paths Are Currently The Only Canonical ID / Do We Want Asset UUIDs?
In this implementation AssetPaths are the only canonical asset
identifier (just like the previous Bevy Asset system and Godot). Moving
assets will result in re-scans (and currently reprocessing, although
reprocessing can easily be avoided with some changes). Asset
renames/moves will break code and assets that rely on specific paths,
unless those paths are fixed up.
Do we want / need "stable asset uuids"? Introducing them is very
possible:
1. Generate a UUID and include it in .meta files
2. Support UUID in AssetPath
3. Generate "asset indices" which are loaded on startup and map UUIDs to
paths.
4 (maybe). Consider only supporting UUIDs for processed assets so we can
generate quick-to-load indices instead of scanning meta files.
The main "pro" is that assets referencing UUIDs don't need to be
migrated when a path changes. The main "con" is that UUIDs cannot be
"lazily resolved" like paths. They need a full view of all assets to
answer the question "does this UUID exist". Which means UUIDs require
the AssetProcessor to fully finish startup scans before saying an asset
doesnt exist. And they essentially require asset pre-processing to use
in apps, because scanning all asset metadata files at runtime to resolve
a UUID is not viable for medium-to-large apps. It really requires a
pre-generated UUID index, which must be loaded before querying for
assets.
I personally think this should be investigated in a separate PR. Paths
aren't going anywhere ... _everyone_ uses filesystems (and
filesystem-like apis) to manage their asset source files. I consider
them permanent canonical asset information. Additionally, they behave
well for both processed and unprocessed asset modes. Given that Bevy is
supporting both, this feels like the right canonical ID to start with.
UUIDS (and maybe even other indexed-identifier types) can be added later
as necessary.
### Folder / File Naming Conventions
All asset processing config currently lives in the `.imported_assets`
folder. The processor transaction log is in `.imported_assets/log`.
Processed assets are added to `.imported_assets/Default`, which will
make migrating to processed asset profiles (ex: a
`.imported_assets/Mobile` profile) a non-breaking change. It also allows
us to create top-level files like `.imported_assets/log` without it
being interpreted as an asset. Meta files currently have a `.meta`
suffix. Do we like these names and conventions?
### Should the `AssetPlugin::processed_dev` configuration enable
`watch_for_changes` automatically?
Currently it does (which I think makes sense), but it does make it the
only configuration that enables watch_for_changes by default.
### Discuss on_loaded High Level Interface:
This PR includes a very rough "proof of concept" `on_loaded` system
adapter that uses the `LoadedWithDependencies` event in combination with
`asset_server.load_asset` dependency tracking to support this pattern
```rust
fn main() {
App::new()
.init_asset::<MyAssets>()
.add_systems(Update, on_loaded(create_array_texture))
.run();
}
#[derive(Asset, Clone)]
struct MyAssets {
#[dependency]
picture_of_my_cat: Handle<Image>,
#[dependency]
picture_of_my_other_cat: Handle<Image>,
}
impl FromWorld for ArrayTexture {
fn from_world(world: &mut World) -> Self {
picture_of_my_cat: server.load("meow.png"),
picture_of_my_other_cat: server.load("meeeeeeeow.png"),
}
}
fn spawn_cat(In(my_assets): In<MyAssets>, mut commands: Commands) {
commands.spawn(SpriteBundle {
texture: my_assets.picture_of_my_cat.clone(),
..default()
});
commands.spawn(SpriteBundle {
texture: my_assets.picture_of_my_other_cat.clone(),
..default()
});
}
```
The implementation is _very_ rough. And it is currently unsafe because
`bevy_ecs` doesn't expose some internals to do this safely from inside
`bevy_asset`. There are plenty of unanswered questions like:
* "do we add a Loadable" derive? (effectively automate the FromWorld
implementation above)
* Should `MyAssets` even be an Asset? (largely implemented this way
because it elegantly builds on `server.load_asset(MyAsset { .. })`
dependency tracking).
We should think hard about what our ideal API looks like (and if this is
a pattern we want to support). Not necessarily something we need to
solve in this PR. The current `on_loaded` impl should probably be
removed from this PR before merging.
## Clarifying Questions
### What about Assets as Entities?
This Bevy Asset V2 proposal implementation initially stored Assets as
ECS Entities. Instead of `AssetId<T>` + the `Assets<T>` resource it used
`Entity` as the asset id and Asset values were just ECS components.
There are plenty of compelling reasons to do this:
1. Easier to inline assets in Bevy Scenes (as they are "just" normal
entities + components)
2. More flexible queries: use the power of the ECS to filter assets (ex:
`Query<Mesh, With<Tree>>`).
3. Extensible. Users can add arbitrary component data to assets.
4. Things like "component visualization tools" work out of the box to
visualize asset data.
However Assets as Entities has a ton of caveats right now:
* We need to be able to allocate entity ids without a direct World
reference (aka rework id allocator in Entities ... i worked around this
in my prototypes by just pre allocating big chunks of entities)
* We want asset change events in addition to ECS change tracking ... how
do we populate them when mutations can come from anywhere? Do we use
Changed queries? This would require iterating over the change data for
all assets every frame. Is this acceptable or should we implement a new
"event based" component change detection option?
* Reconciling manually created assets with asset-system managed assets
has some nuance (ex: are they "loaded" / do they also have that
component metadata?)
* "how do we handle "static" / default entity handles" (ties in to the
Entity Indices discussion:
https://github.com/bevyengine/bevy/discussions/8319). This is necessary
for things like "built in" assets and default handles in things like
SpriteBundle.
* Storing asset information as a component makes it easy to "invalidate"
asset state by removing the component (or forcing modifications).
Ideally we have ways to lock this down (some combination of Rust type
privacy and ECS validation)
In practice, how we store and identify assets is a reasonably
superficial change (porting off of Assets as Entities and implementing
dedicated storage + ids took less than a day). So once we sort out the
remaining challenges the flip should be straightforward. Additionally, I
do still have "Assets as Entities" in my commit history, so we can reuse
that work. I personally think "assets as entities" is a good endgame,
but it also doesn't provide _significant_ value at the moment and it
certainly isn't ready yet with the current state of things.
### Why not Distill?
[Distill](https://github.com/amethyst/distill) is a high quality fully
featured asset system built in Rust. It is very natural to ask "why not
just use Distill?".
It is also worth calling out that for awhile, [we planned on adopting
Distill / I signed off on
it](https://github.com/bevyengine/bevy/issues/708).
However I think Bevy has a number of constraints that make Distill
adoption suboptimal:
* **Architectural Simplicity:**
* Distill's processor requires an in-memory database (lmdb) and RPC
networked API (using Cap'n Proto). Each of these introduces API
complexity that increases maintenance burden and "code grokability".
Ignoring tests, documentation, and examples, Distill has 24,237 lines of
Rust code (including generated code for RPC + database interactions). If
you ignore generated code, it has 11,499 lines.
* Bevy builds the AssetProcessor and AssetServer using pluggable
AssetReader/AssetWriter Rust traits with simple io interfaces. They do
not necessitate databases or RPC interfaces (although Readers/Writers
could use them if that is desired). Bevy Asset V2 (at the time of
writing this PR) is 5,384 lines of Rust code (ignoring tests,
documentation, and examples). Grain of salt: Distill does have more
features currently (ex: Asset Packing, GUIDS, remote-out-of-process
asset processor). I do plan to implement these features in Bevy Asset V2
and I personally highly doubt they will meaningfully close the 6115
lines-of-code gap.
* This complexity gap (which while illustrated by lines of code, is much
bigger than just that) is noteworthy to me. Bevy should be hackable and
there are pillars of Distill that are very hard to understand and
extend. This is a matter of opinion (and Bevy Asset V2 also has
complicated areas), but I think Bevy Asset V2 is much more approachable
for the average developer.
* Necessary disclaimer: counting lines of code is an extremely rough
complexity metric. Read the code and form your own opinions.
* **Optional Asset Processing:** Not all Bevy Apps (or Bevy App
developers) need / want asset preprocessing. Processing increases the
complexity of the development environment by introducing things like
meta files, imported asset storage, running processors in the
background, waiting for processing to finish, etc. Distill _requires_
preprocessing to work. With Bevy Asset V2 processing is fully opt-in.
The AssetServer isn't directly aware of asset processors at all.
AssetLoaders only care about converting bytes to runtime Assets ... they
don't know or care if the bytes were pre-processed or not. Processing is
"elegantly" (forgive my self-congratulatory phrasing) layered on top and
builds on the existing Asset system primitives.
* **Direct Filesystem Access to Processed Asset State:** Distill stores
processed assets in a database. This makes debugging / inspecting the
processed outputs harder (either requires special tooling to query the
database or they need to be "deployed" to be inspected). Bevy Asset V2,
on the other hand, stores processed assets in the filesystem (by default
... this is configurable). This makes interacting with the processed
state more natural. Note that both Godot and Unity's new asset system
store processed assets in the filesystem.
* **Portability**: Because Distill's processor uses lmdb and RPC
networking, it cannot be run on certain platforms (ex: lmdb is a
non-rust dependency that cannot run on the web, some platforms don't
support running network servers). Bevy should be able to process assets
everywhere (ex: run the Bevy Editor on the web, compile + process
shaders on mobile, etc). Distill does partially mitigate this problem by
supporting "streaming" assets via the RPC protocol, but this is not a
full solve from my perspective. And Bevy Asset V2 can (in theory) also
stream assets (without requiring RPC, although this isn't implemented
yet)
Note that I _do_ still think Distill would be a solid asset system for
Bevy. But I think the approach in this PR is a better solve for Bevy's
specific "asset system requirements".
### Doesn't async-fs just shim requests to "sync" `std::fs`? What is the
point?
"True async file io" has limited / spotty platform support. async-fs
(and the rust async ecosystem generally ... ex Tokio) currently use
async wrappers over std::fs that offload blocking requests to separate
threads. This may feel unsatisfying, but it _does_ still provide value
because it prevents our task pools from blocking on file system
operations (which would prevent progress when there are many tasks to
do, but all threads in a pool are currently blocking on file system
ops).
Additionally, using async APIs for our AssetReaders and AssetWriters
also provides value because we can later add support for "true async
file io" for platforms that support it. _And_ we can implement other
"true async io" asset backends (such as networked asset io).
## Draft TODO
- [x] Fill in missing filesystem event APIs: file removed event (which
is expressed as dangling RenameFrom events in some cases), file/folder
renamed event
- [x] Assets without loaders are not moved to the processed folder. This
breaks things like referenced `.bin` files for GLTFs. This should be
configurable per-non-asset-type.
- [x] Initial implementation of Reflect and FromReflect for Handle. The
"deserialization" parity bar is low here as this only worked with static
UUIDs in the old impl ... this is a non-trivial problem. Either we add a
Handle::AssetPath variant that gets "upgraded" to a strong handle on
scene load or we use a separate AssetRef type for Bevy scenes (which is
converted to a runtime Handle on load). This deserves its own discussion
in a different pr.
- [x] Populate read_asset_bytes hash when run by the processor (a bit of
a special case .. when run by the processor the processed meta will
contain the hash so we don't need to compute it on the spot, but we
don't want/need to read the meta when run by the main AssetServer)
- [x] Delay hot reloading: currently filesystem events are handled
immediately, which creates timing issues in some cases. For example hot
reloading images can sometimes break because the image isn't finished
writing. We should add a delay, likely similar to the [implementation in
this PR](https://github.com/bevyengine/bevy/pull/8503).
- [x] Port old platform-specific AssetIo implementations to the new
AssetReader interface (currently missing Android and web)
- [x] Resolve on_loaded unsafety (either by removing the API entirely or
removing the unsafe)
- [x] Runtime loader setting overrides
- [x] Remove remaining unwraps that should be error-handled. There are
number of TODOs here
- [x] Pretty AssetPath Display impl
- [x] Document more APIs
- [x] Resolve spurious "reloading because it has changed" events (to
repro run load_gltf with `processed_dev()`)
- [x] load_dependency hot reloading currently only works for processed
assets. If processing is disabled, load_dependency changes are not hot
reloaded.
- [x] Replace AssetInfo dependency load/fail counters with
`loading_dependencies: HashSet<UntypedAssetId>` to prevent reloads from
(potentially) breaking counters. Storing this will also enable
"dependency reloaded" events (see [Next Steps](#next-steps))
- [x] Re-add filesystem watcher cargo feature gate (currently it is not
optional)
- [ ] Migration Guide
- [ ] Changelog
## Followup TODO
- [ ] Replace "eager unchanged processed asset loading" behavior with
"don't returned unchanged processed asset until dependencies have been
checked".
- [ ] Add true `Ignore` AssetAction that does not copy the asset to the
imported_assets folder.
- [ ] Finish "live asset unloading" (ex: free up CPU asset memory after
uploading an image to the GPU), rethink RenderAssets, and port renderer
features. The `Assets` collection uses `Option<T>` for asset storage to
support its removal. (1) the Option might not actually be necessary ...
might be able to just remove from the collection entirely (2) need to
finalize removal apis
- [ ] Try replacing the "channel based" asset id recycling with
something a bit more efficient (ex: we might be able to use raw atomic
ints with some cleverness)
- [ ] Consider adding UUIDs to processed assets (scoped just to helping
identify moved assets ... not exposed to load queries ... see [Next
Steps](#next-steps))
- [ ] Store "last modified" source asset and meta timestamps in
processed meta files to enable skipping expensive hashing when the file
wasn't changed
- [ ] Fix "slow loop" handle drop fix
- [ ] Migrate to TypeName
- [x] Handle "loader preregistration". See #9429
## Next Steps
* **Configurable per-type defaults for AssetMeta**: It should be
possible to add configuration like "all png image meta should default to
using nearest sampling" (currently this hard-coded per-loader/processor
Settings::default() impls). Also see the "Folder Meta" bullet point.
* **Avoid Reprocessing on Asset Renames / Moves**: See the "canonical
asset ids" discussion in [Open Questions](#open-questions) and the
relevant bullet point in [Draft TODO](#draft-todo). Even without
canonical ids, folder renames could avoid reprocessing in some cases.
* **Multiple Asset Sources**: Expand AssetPath to support "asset source
names" and support multiple AssetReaders in the asset server (ex:
`webserver://some_path/image.png` backed by an Http webserver
AssetReader). The "default" asset reader would use normal
`some_path/image.png` paths. Ideally this works in combination with
multiple AssetWatchers for hot-reloading
* **Stable Type Names**: this pr removes the TypeUuid requirement from
assets in favor of `std::any::type_name`. This makes defining assets
easier (no need to generate a new uuid / use weird proc macro syntax).
It also makes reading meta files easier (because things have "friendly
names"). We also use type names for components in scene files. If they
are good enough for components, they are good enough for assets. And
consistency across Bevy pillars is desirable. However,
`std::any::type_name` is not guaranteed to be stable (although in
practice it is). We've developed a [stable type
path](https://github.com/bevyengine/bevy/pull/7184) to resolve this,
which should be adopted when it is ready.
* **Command Line Interface**: It should be possible to run the asset
processor in a separate process from the command line. This will also
require building a network-server-backed AssetReader to communicate
between the app and the processor. We've been planning to build a "bevy
cli" for awhile. This seems like a good excuse to build it.
* **Asset Packing**: This is largely an additive feature, so it made
sense to me to punt this until we've laid the foundations in this PR.
* **Per-Platform Processed Assets**: It should be possible to generate
assets for multiple platforms by supporting multiple "processor
profiles" per asset (ex: compress with format X on PC and Y on iOS). I
think there should probably be arbitrary "profiles" (which can be
separate from actual platforms), which are then assigned to a given
platform when generating the final asset distribution for that platform.
Ex: maybe devs want a "Mobile" profile that is shared between iOS and
Android. Or a "LowEnd" profile shared between web and mobile.
* **Versioning and Migrations**: Assets, Loaders, Savers, and Processors
need to have versions to determine if their schema is valid. If an asset
/ loader version is incompatible with the current version expected at
runtime, the processor should be able to migrate them. I think we should
try using Bevy Reflect for this, as it would allow us to load the old
version as a dynamic Reflect type without actually having the old Rust
type. It would also allow us to define "patches" to migrate between
versions (Bevy Reflect devs are currently working on patching). The
`.meta` file already has its own format version. Migrating that to new
versions should also be possible.
* **Real Copy-on-write AssetPaths**: Rust's actual Cow (clone-on-write
type) currently used by AssetPath can still result in String clones that
aren't actually necessary (cloning an Owned Cow clones the contents).
Bevy's asset system requires cloning AssetPaths in a number of places,
which result in actual clones of the internal Strings. This is not
efficient. AssetPath internals should be reworked to exhibit truer
cow-like-behavior that reduces String clones to the absolute minimum.
* **Consider processor-less processing**: In theory the AssetServer
could run processors "inline" even if the background AssetProcessor is
disabled. If we decide this is actually desirable, we could add this.
But I don't think its a priority in the short or medium term.
* **Pre-emptive dependency loading**: We could encode dependencies in
processed meta files, which could then be used by the Asset Server to
kick of dependency loads as early as possible (prior to starting the
actual asset load). Is this desirable? How much time would this save in
practice?
* **Optimize Processor With UntypedAssetIds**: The processor exclusively
uses AssetPath to identify assets currently. It might be possible to
swap these out for UntypedAssetIds in some places, which are smaller /
cheaper to hash and compare.
* **One to Many Asset Processing**: An asset source file that produces
many assets currently must be processed into a single "processed" asset
source. If labeled assets can be written separately they can each have
their own configured savers _and_ they could be loaded more granularly.
Definitely worth exploring!
* **Automatically Track "Runtime-only" Asset Dependencies**: Right now,
tracking "created at runtime" asset dependencies requires adding them
via `asset_server.load_asset(StandardMaterial::default())`. I think with
some cleverness we could also do this for
`materials.add(StandardMaterial::default())`, making tracking work
"everywhere". There are challenges here relating to change detection /
ensuring the server is made aware of dependency changes. This could be
expensive in some cases.
* **"Dependency Changed" events**: Some assets have runtime artifacts
that need to be re-generated when one of their dependencies change (ex:
regenerate a material's bind group when a Texture needs to change). We
are generating the dependency graph so we can definitely produce these
events. Buuuuut generating these events will have a cost / they could be
high frequency for some assets, so we might want this to be opt-in for
specific cases.
* **Investigate Storing More Information In Handles**: Handles can now
store arbitrary information, which makes it cheaper and easier to
access. How much should we move into them? Canonical asset load states
(via atomics)? (`handle.is_loaded()` would be very cool). Should we
store the entire asset and remove the `Assets<T>` collection?
(`Arc<RwLock<Option<Image>>>`?)
* **Support processing and loading files without extensions**: This is a
pretty arbitrary restriction and could be supported with very minimal
changes.
* **Folder Meta**: It would be nice if we could define per folder
processor configuration defaults (likely in a `.meta` or `.folder_meta`
file). Things like "default to linear filtering for all Images in this
folder".
* **Replace async_broadcast with event-listener?** This might be
approximately drop-in for some uses and it feels more light weight
* **Support Running the AssetProcessor on the Web**: Most of the hard
work is done here, but there are some easy straggling TODOs (make the
transaction log an interface instead of a direct file writer so we can
write a web storage backend, implement an AssetReader/AssetWriter that
reads/writes to something like LocalStorage).
* **Consider identifying and preventing circular dependencies**: This is
especially important for "processor dependencies", as processing will
silently never finish in these cases.
* **Built-in/Inlined Asset Hot Reloading**: This PR regresses
"built-in/inlined" asset hot reloading (previously provided by the
DebugAssetServer). I'm intentionally punting this because I think it can
be cleanly implemented with "multiple asset sources" by registering a
"debug asset source" (ex: `debug://bevy_pbr/src/render/pbr.wgsl` asset
paths) in combination with an AssetWatcher for that asset source and
support for "manually loading pats with asset bytes instead of
AssetReaders". The old DebugAssetServer was quite nasty and I'd love to
avoid that hackery going forward.
* **Investigate ways to remove double-parsing meta files**: Parsing meta
files currently involves parsing once with "minimal" versions of the
meta file to extract the type name of the loader/processor config, then
parsing again to parse the "full" meta. This is suboptimal. We should be
able to define custom deserializers that (1) assume the loader/processor
type name comes first (2) dynamically looks up the loader/processor
registrations to deserialize settings in-line (similar to components in
the bevy scene format). Another alternative: deserialize as dynamic
Reflect objects and then convert.
* **More runtime loading configuration**: Support using the Handle type
as a hint to select an asset loader (instead of relying on AssetPath
extensions)
* **More high level Processor trait implementations**: For example, it
might be worth adding support for arbitrary chains of "asset transforms"
that modify an in-memory asset representation between loading and
saving. (ex: load a Mesh, run a `subdivide_mesh` transform, followed by
a `flip_normals` transform, then save the mesh to an efficient
compressed format).
* **Bevy Scene Handle Deserialization**: (see the relevant [Draft TODO
item](#draft-todo) for context)
* **Explore High Level Load Interfaces**: See [this
discussion](#discuss-on_loaded-high-level-interface) for one prototype.
* **Asset Streaming**: It would be great if we could stream Assets (ex:
stream a long video file piece by piece)
* **ID Exchanging**: In this PR Asset Handles/AssetIds are bigger than
they need to be because they have a Uuid enum variant. If we implement
an "id exchanging" system that trades Uuids for "efficient runtime ids",
we can cut down on the size of AssetIds, making them more efficient.
This has some open design questions, such as how to spawn entities with
"default" handle values (as these wouldn't have access to the exchange
api in the current system).
* **Asset Path Fixup Tooling**: Assets that inline asset paths inside
them will break when an asset moves. The asset system provides the
functionality to detect when paths break. We should build a framework
that enables formats to define "path migrations". This is especially
important for scene files. For editor-generated files, we should also
consider using UUIDs (see other bullet point) to avoid the need to
migrate in these cases.
---------
Co-authored-by: BeastLe9enD <beastle9end@outlook.de>
Co-authored-by: Mike <mike.hsu@gmail.com>
Co-authored-by: Nicola Papale <nicopap@users.noreply.github.com>
# Objective
fix #8185, #6710
replace #7005 (closed)
rgb and rgba 16 bit textures currently default to `Rgba16Uint`, the more
common use is `Rgba16Unorm`, which also matches the default type of rgb8
and rgba8 textures.
## Solution
Change default to `Rgba16Unorm`
# Objective
Bevy currently crashes when meshes with different vertex counts for
attributes are provided.
## Solution
Instead of crashing we can warn and take the min length of all the given
attributes.
# Objective
- Fixes#9244.
## Solution
- Changed the `(Into)SystemSetConfigs` traits and structs be more like
the `(Into)SystemConfigs` traits and structs.
- Replaced uses of `IntoSystemSetConfig` with `IntoSystemSetConfigs`
- Added generic `ItemConfig` and `ItemConfigs` types.
- Changed `SystemConfig(s)` and `SystemSetConfig(s)` to be type aliases
to `ItemConfig(s)`.
- Added generic `process_configs` to `ScheduleGraph`.
- Changed `configure_sets_inner` and `add_systems_inner` to reuse
`process_configs`.
---
## Changelog
- Added `run_if` to `IntoSystemSetConfigs`
- Deprecated `Schedule::configure_set` and `App::configure_set`
- Removed `IntoSystemSetConfig`
## Migration Guide
- Use `App::configure_sets` instead of `App::configure_set`
- Use `Schedule::configure_sets` instead of `Schedule::configure_set`
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
This PR aims to fix a handful of problems with the `SpatialBundle` docs:
The docs describe the role of the single components of the bundle,
overshadowing the purpose of `SpatialBundle` itself. Also, those items
may be added, removed or changed over time, as it happened with #9497,
requiring a higher maintenance effort, which will often result in
errors, as it happened.
## Solution
Just describe the role of `SpatialBundle` and of the transform and
visibility concepts, without mentioning the specific component types.
Since the bundle has public fields, the reader can easily click them and
read the documentation if they need to know more. I removed the mention
of numbers of components since they were four, now they are five, and
who knows how many they will be in the future. In this process, I
removed the bullet points, which are no longer needed, and were
contextually wrong in the first place, since they were meant to list the
components, but ended up describing use-cases and requirements for
hierarchies.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Supercedes #8872
- Improve sprite rendering performance after the regression in #9236
## Solution
- Use an instance-rate vertex buffer to store per-instance data.
- Store color, UV offset and scale, and a transform per instance.
- Convert Sprite rect, custom_size, anchor, and flip_x/_y to an affine
3x4 matrix and store the transpose of that in the per-instance data.
This is similar to how MeshUniform uses transpose affine matrices.
- Use a special index buffer that has batches of 6 indices referencing 4
vertices. The lower 2 bits indicate the x and y of a quad such that the
corners are:
```
10 11
00 01
```
UVs are implicit but get modified by UV offset and scale The remaining
upper bits contain the instance index.
## Benchmarks
I will compare versus `main` before #9236 because the results should be
as good as or faster than that. Running `bevymark -- 10000 16` on an M1
Max with `main` at `e8b38925` in yellow, this PR in red:
Looking at the median frame times, that's a 37% reduction from before.
---
## Changelog
- Changed: Improved sprite rendering performance by leveraging an
instance-rate vertex buffer.
---------
Co-authored-by: Giacomo Stevanato <giaco.stevanato@gmail.com>
# Objective
Fix#8267.
Fixes half of #7840.
The `ComputedVisibility` component contains two flags: hierarchy
visibility, and view visibility (whether its visible to any cameras).
Due to the modular and open-ended way that view visibility is computed,
it triggers change detection every single frame, even when the value
does not change. Since hierarchy visibility is stored in the same
component as view visibility, this means that change detection for
inherited visibility is completely broken.
At the company I work for, this has become a real issue. We are using
change detection to only re-render scenes when necessary. The broken
state of change detection for computed visibility means that we have to
to rely on the non-inherited `Visibility` component for now. This is
workable in the early stages of our project, but since we will
inevitably want to use the hierarchy, we will have to either:
1. Roll our own solution for computed visibility.
2. Fix the issue for everyone.
## Solution
Split the `ComputedVisibility` component into two: `InheritedVisibilty`
and `ViewVisibility`.
This allows change detection to behave properly for
`InheritedVisibility`.
View visiblity is still erratic, although it is less useful to be able
to detect changes
for this flavor of visibility.
Overall, this actually simplifies the API. Since the visibility system
consists of
self-explaining components, it is much easier to document the behavior
and usage.
This approach is more modular and "ECS-like" -- one could
strip out the `ViewVisibility` component entirely if it's not needed,
and rely only on inherited visibility.
---
## Changelog
- `ComputedVisibility` has been removed in favor of:
`InheritedVisibility` and `ViewVisiblity`.
## Migration Guide
The `ComputedVisibilty` component has been split into
`InheritedVisiblity` and
`ViewVisibility`. Replace any usages of
`ComputedVisibility::is_visible_in_hierarchy`
with `InheritedVisibility::get`, and replace
`ComputedVisibility::is_visible_in_view`
with `ViewVisibility::get`.
```rust
// Before:
commands.spawn(VisibilityBundle {
visibility: Visibility::Inherited,
computed_visibility: ComputedVisibility::default(),
});
// After:
commands.spawn(VisibilityBundle {
visibility: Visibility::Inherited,
inherited_visibility: InheritedVisibility::default(),
view_visibility: ViewVisibility::default(),
});
```
```rust
// Before:
fn my_system(q: Query<&ComputedVisibilty>) {
for vis in &q {
if vis.is_visible_in_hierarchy() {
// After:
fn my_system(q: Query<&InheritedVisibility>) {
for inherited_visibility in &q {
if inherited_visibility.get() {
```
```rust
// Before:
fn my_system(q: Query<&ComputedVisibilty>) {
for vis in &q {
if vis.is_visible_in_view() {
// After:
fn my_system(q: Query<&ViewVisibility>) {
for view_visibility in &q {
if view_visibility.get() {
```
```rust
// Before:
fn my_system(mut q: Query<&mut ComputedVisibilty>) {
for vis in &mut q {
vis.set_visible_in_view();
// After:
fn my_system(mut q: Query<&mut ViewVisibility>) {
for view_visibility in &mut q {
view_visibility.set();
```
---------
Co-authored-by: Robert Swain <robert.swain@gmail.com>
# Objective
Make it easier to create bounding boxes in user code by providing a
constructor that computes a box surrounding an arbitrary number of
points.
## Solution
Add `Aabb::enclosing`, which accepts iterators, slices, or arrays.
---------
Co-authored-by: Tristan Guichaoua <33934311+tguichaoua@users.noreply.github.com>
# Objective
- The current `EventReader::iter` has been determined to cause confusion
among new Bevy users. It was suggested by @JoJoJet to rename the method
to better clarify its usage.
- Solves #9624
## Solution
- Rename `EventReader::iter` to `EventReader::read`.
- Rename `EventReader::iter_with_id` to `EventReader::read_with_id`.
- Rename `ManualEventReader::iter` to `ManualEventReader::read`.
- Rename `ManualEventReader::iter_with_id` to
`ManualEventReader::read_with_id`.
---
## Changelog
- `EventReader::iter` has been renamed to `EventReader::read`.
- `EventReader::iter_with_id` has been renamed to
`EventReader::read_with_id`.
- `ManualEventReader::iter` has been renamed to
`ManualEventReader::read`.
- `ManualEventReader::iter_with_id` has been renamed to
`ManualEventReader::read_with_id`.
- Deprecated `EventReader::iter`
- Deprecated `EventReader::iter_with_id`
- Deprecated `ManualEventReader::iter`
- Deprecated `ManualEventReader::iter_with_id`
## Migration Guide
- Existing usages of `EventReader::iter` and `EventReader::iter_with_id`
will have to be changed to `EventReader::read` and
`EventReader::read_with_id` respectively.
- Existing usages of `ManualEventReader::iter` and
`ManualEventReader::iter_with_id` will have to be changed to
`ManualEventReader::read` and `ManualEventReader::read_with_id`
respectively.
# Objective
As far as I can tell, this is no longer needed since the switch to
fancier shader imports via `naga_oil`.
This shouldn't have any affect on compile times because it's in our tree
from `naga_oil`, `tracing-subscriber`, and `rodio`.
# Objective
- Move schedule name into `Schedule` to allow the schedule name to be
used for errors and tracing in Schedule methods
- Fixes#9510
## Solution
- Move label onto `Schedule` and adjust api's on `World` and `Schedule`
to not pass explicit label where it makes sense to.
- add name to errors and tracing.
- `Schedule::new` now takes a label so either add the label or use
`Schedule::default` which uses a default label. `default` is mostly used
in doc examples and tests.
---
## Changelog
- move label onto `Schedule` to improve error message and logging for
schedules.
## Migration Guide
`Schedule::new` and `App::add_schedule`
```rust
// old
let schedule = Schedule::new();
app.add_schedule(MyLabel, schedule);
// new
let schedule = Schedule::new(MyLabel);
app.add_schedule(schedule);
```
if you aren't using a label and are using the schedule struct directly
you can use the default constructor.
```rust
// old
let schedule = Schedule::new();
schedule.run(world);
// new
let schedule = Schedule::default();
schedule.run(world);
```
`Schedules:insert`
```rust
// old
let schedule = Schedule::new();
schedules.insert(MyLabel, schedule);
// new
let schedule = Schedule::new(MyLabel);
schedules.insert(schedule);
```
`World::add_schedule`
```rust
// old
let schedule = Schedule::new();
world.add_schedule(MyLabel, schedule);
// new
let schedule = Schedule::new(MyLabel);
world.add_schedule(schedule);
```
# Objective
These new defaults match what is used by `Camera2dBundle::default()`,
removing a potential footgun from overriding a field in the projection
component of the bundle.
## Solution
Adjusted the near clipping plane of `OrthographicProjection::default()`
to `-1000.`.
---
## Changelog
Changed: `OrthographicProjection::default()` now matches the value used
in `Camera2dBundle::default()`
## Migration Guide
Workarounds used to keep the projection consistent with the bundle
defaults are no longer required. Meanwhile, uses of
`OrthographicProjection` in 2D scenes may need to be adjusted; the
`near` clipping plane default was changed from `0.0` to `-1000.0`.
# Objective
This PR's first aim is to fix a mistake in `HalfSpace`'s documentation.
When defining a `Frustum` myself in bevy_basic_portals, I realised that
the "distance" of the `HalfSpace` is not, as the current doc defines,
the "distance from the origin along the normal", but actually the
opposite of that.
See the example I gave in this PR.
This means one of two things:
1. The documentation about `HalfSpace` is wrong (it is either way
because of the `n.p + d > 0` formula given later anyway, which is how it
behaves, but in that formula `d` is indeed the opposite of the "distance
from the origin along the normal", otherwise it should be `n.p > d`)
2. The distance is supposed to be the "distance from the origin along
the normal" but when used in a Frustum it's used as the opposite, and it
is a mistake
3. Same as 2, but it is somehow intended
Since I think `HalfSpace` is only used for `Frustum`, and it's easier to
fix documentation than code, I assumed for this PR we're in case number
1. If we're in case number 3, the documentation of `Frustum` needs to
change, and in case number 2, the code needs to be fixed.
While I was at it, I also :
- Tried to improve the documentation for `Frustum`, `Aabb`, and
`VisibilitySystems`, among others, since they're all related to
`Frustum`.
- Fixed documentation about frustum culling not applying to 2d objects,
which is not true since https://github.com/bevyengine/bevy/pull/7885
## Remarks and questions
- What about a `HalfSpace` with an infinite distance, is it allowed and
does it represents the whole space? If so it should probably be
mentioned.
- I referenced the `update_frusta` system in
`bevy_render::view::visibility` directly instead of referencing its
system set, should I reference the system set instead? It's a bit
annoying since it's in 3 sets.
- `visibility_propagate` is not public for some reason, I think it
probably should be, but for now I only documented its system set, should
I make it public? I don't think that would count as a breaking change?
- Why is `Aabb` inserted by a system, with `NoFrustumCulling` as an
opt-out, instead of having it inserted by default in `PbrBundle` for
example and then the system calculating it when it's added? Is it
because there is still no way to have an optional component inside a
bundle?
---------
Co-authored-by: SpecificProtagonist <vincentjunge@posteo.net>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
This is a continuation of this PR: #8062
# Objective
- Reorder render schedule sets to allow data preparation when phase item
order is known to support improved batching
- Part of the batching/instancing etc plan from here:
https://github.com/bevyengine/bevy/issues/89#issuecomment-1379249074
- The original idea came from @inodentry and proved to be a good one.
Thanks!
- Refactor `bevy_sprite` and `bevy_ui` to take advantage of the new
ordering
## Solution
- Move `Prepare` and `PrepareFlush` after `PhaseSortFlush`
- Add a `PrepareAssets` set that runs in parallel with other systems and
sets in the render schedule.
- Put prepare_assets systems in the `PrepareAssets` set
- If explicit dependencies are needed on Mesh or Material RenderAssets
then depend on the appropriate system.
- Add `ManageViews` and `ManageViewsFlush` sets between
`ExtractCommands` and Queue
- Move `queue_mesh*_bind_group` to the Prepare stage
- Rename them to `prepare_`
- Put systems that prepare resources (buffers, textures, etc.) into a
`PrepareResources` set inside `Prepare`
- Put the `prepare_..._bind_group` systems into a `PrepareBindGroup` set
after `PrepareResources`
- Move `prepare_lights` to the `ManageViews` set
- `prepare_lights` creates views and this must happen before `Queue`
- This system needs refactoring to stop handling all responsibilities
- Gather lights, sort, and create shadow map views. Store sorted light
entities in a resource
- Remove `BatchedPhaseItem`
- Replace `batch_range` with `batch_size` representing how many items to
skip after rendering the item or to skip the item entirely if
`batch_size` is 0.
- `queue_sprites` has been split into `queue_sprites` for queueing phase
items and `prepare_sprites` for batching after the `PhaseSort`
- `PhaseItem`s are still inserted in `queue_sprites`
- After sorting adjacent compatible sprite phase items are accumulated
into `SpriteBatch` components on the first entity of each batch,
containing a range of vertex indices. The associated `PhaseItem`'s
`batch_size` is updated appropriately.
- `SpriteBatch` items are then drawn skipping over the other items in
the batch based on the value in `batch_size`
- A very similar refactor was performed on `bevy_ui`
---
## Changelog
Changed:
- Reordered and reworked render app schedule sets. The main change is
that data is extracted, queued, sorted, and then prepared when the order
of data is known.
- Refactor `bevy_sprite` and `bevy_ui` to take advantage of the
reordering.
## Migration Guide
- Assets such as materials and meshes should now be created in
`PrepareAssets` e.g. `prepare_assets<Mesh>`
- Queueing entities to `RenderPhase`s continues to be done in `Queue`
e.g. `queue_sprites`
- Preparing resources (textures, buffers, etc.) should now be done in
`PrepareResources`, e.g. `prepare_prepass_textures`,
`prepare_mesh_uniforms`
- Prepare bind groups should now be done in `PrepareBindGroups` e.g.
`prepare_mesh_bind_group`
- Any batching or instancing can now be done in `Prepare` where the
order of the phase items is known e.g. `prepare_sprites`
## Next Steps
- Introduce some generic mechanism to ensure items that can be batched
are grouped in the phase item order, currently you could easily have
`[sprite at z 0, mesh at z 0, sprite at z 0]` preventing batching.
- Investigate improved orderings for building the MeshUniform buffer
- Implementing batching across the rest of bevy
---------
Co-authored-by: Robert Swain <robert.swain@gmail.com>
Co-authored-by: robtfm <50659922+robtfm@users.noreply.github.com>
# Objective
[Rust 1.72.0](https://blog.rust-lang.org/2023/08/24/Rust-1.72.0.html) is
now stable.
# Notes
- `let-else` formatting has arrived!
- I chose to allow `explicit_iter_loop` due to
https://github.com/rust-lang/rust-clippy/issues/11074.
We didn't hit any of the false positives that prevent compilation, but
fixing this did produce a lot of the "symbol soup" mentioned, e.g. `for
image in &mut *image_events {`.
Happy to undo this if there's consensus the other way.
---------
Co-authored-by: François <mockersf@gmail.com>
# Objective
- Fixes#9552
## Solution
- Only n_pixels bytes of data was being copied instead of 1 byte per
component, i.e. n_pixels * 4
---
## Changelog
- Fixed: loading of Rgb8 ktx2 files.
# Objective
Allow users to specify the power preference when selecting a wgpu
adapter, which is useful for testing or workaround purposes, and makes
the behaviour consistent with the already present check for
`WGPU_BACKEND`.
## Solution
In `WgpuSettings::default()`, allow users to specify the
`WGPU_POWER_PREF` to affect the wgpu adapter choice.
# Objective
- Significantly reduce the size of MeshUniform by only including
necessary data.
## Solution
Local to world, model transforms are affine. This means they only need a
4x3 matrix to represent them.
`MeshUniform` stores the current, and previous model transforms, and the
inverse transpose of the current model transform, all as 4x4 matrices.
Instead we can store the current, and previous model transforms as 4x3
matrices, and we only need the upper-left 3x3 part of the inverse
transpose of the current model transform. This change allows us to
reduce the serialized MeshUniform size from 208 bytes to 144 bytes,
which is over a 30% saving in data to serialize, and VRAM bandwidth and
space.
## Benchmarks
On an M1 Max, running `many_cubes -- sphere`, main is in yellow, this PR
is in red:
<img width="1484" alt="Screenshot 2023-08-11 at 02 36 43"
src="https://github.com/bevyengine/bevy/assets/302146/7d99c7b3-f2bb-4004-a8d0-4c00f755cb0d">
A reduction in frame time of ~14%.
---
## Changelog
- Changed: Redefined `MeshUniform` to improve performance by using 4x3
affine transforms and reconstructing 4x4 matrices in the shader. Helper
functions were added to `bevy_pbr::mesh_functions` to unpack the data.
`affine_to_square` converts the packed 4x3 in 3x4 matrix data to a 4x4
matrix. `mat2x4_f32_to_mat3x3` converts the 3x3 in mat2x4 + f32 matrix
data back into a 3x3.
## Migration Guide
Shader code before:
```
var model = mesh[instance_index].model;
```
Shader code after:
```
#import bevy_pbr::mesh_functions affine_to_square
var model = affine_to_square(mesh[instance_index].model);
```
# Objective
- When loading gltf files during app creation (for example using a
FromWorld impl and adding that as a resource), no loader was found.
- As the gltf loader can load compressed formats, it needs to know what
the GPU supports so it's not available at app creation time.
## Solution
alternative to #9426
- add functionality to preregister the loader. loading assets with
matching extensions will block until a real loader is registered.
- preregister "gltf" and "glb".
- prereigster image formats.
the way this is set up, if a set of extensions are all registered with a
single preregistration call, then later a loader is added that matches
some of the extensions, assets using the remaining extensions will then
fail. i think that should work well for image formats that we don't know
are supported until later.
# Objective
Bevy prefers `mod.rs` inside `module_name` files over `module_name.rs`
collocated with `module_name`. In `bevy_render`, it seems the `window`
modules didn't follow this convention
## Solution
- Follow the `mod.rs` convention.
# Objective
Update a camera's frustum only when needed.
- Maybe a performance gain from not having to compute frusta when not
needed, at the cost of change detection (?)
- Making "fighting" with `update_frusta` less tedious, see
https://github.com/bevyengine/bevy/issues/9077 and
https://discord.com/channels/691052431525675048/743663924229963868/1127566087966433322
## Solution
Add change detection filter for `GlobalTransform` or `T:
CameraProjection` in `update_frusta`, since those are the cases when the
frustum needs to be updated.
## Note
I don't think a migration guide and changelog are needed, but I'm not
100% sure, I could put something like "if you're fighting against
`update_frusta`, you can do it only when there is a change to
`GlobalTransform` or `CameraProjection` now", what do you think? It's
not really a breaking change with a normal use case.
naga and wgpu should polyfill WGSL instance_index functionality where it
is not available in GLSL. Until that is done, we can work around it in
bevy using a push constant which is converted to a uniform by naga and
wgpu.
# Objective
- Fixes#9375
## Solution
- Use a push constant to pass in the base instance to the shader on
WebGL2 so that base instance + gl_InstanceID is used to correctly
represent the instance index.
## TODO
- [ ] Benchmark vs per-object dynamic offset MeshUniform as this will
now push a uniform value per-draw as well as update the dynamic offset
per-batch.
- [x] Test on DX12 AMD/NVIDIA to check that this PR does not regress any
problems that were observed there. (@Elabajaba @robtfm were testing that
last time - help appreciated. <3 )
---
## Changelog
- Added: `bevy_render::instance_index` shader import which includes a
workaround for the lack of a WGSL `instance_index` polyfill for WebGL2
in naga and wgpu for the time being. It uses a push_constant which gets
converted to a plain uniform by naga and wgpu.
## Migration Guide
Shader code before:
```
struct Vertex {
@builtin(instance_index) instance_index: u32,
...
}
@vertex
fn vertex(vertex_no_morph: Vertex) -> VertexOutput {
...
var model = mesh[vertex_no_morph.instance_index].model;
```
After:
```
#import bevy_render::instance_index
struct Vertex {
@builtin(instance_index) instance_index: u32,
...
}
@vertex
fn vertex(vertex_no_morph: Vertex) -> VertexOutput {
...
var model = mesh[bevy_render::instance_index::get_instance_index(vertex_no_morph.instance_index)].model;
```
# Objective
shader defs associated with a shader via `load_internal_asset!` or
`Shader::from_xxx_with_defs` were being accidentally ignored for
top-level shaders.
## Solution
include the defs for top level shaders.
# Objective
This PR continues https://github.com/bevyengine/bevy/pull/8885
It aims to improve the `Mesh` documentation in the following ways:
- Put everything at the "top level" instead of the "impl".
- Explain better what is a Mesh, how it can be created, and that it can
be edited.
- Explain it can be used with a `Material`, and mention
`StandardMaterial`, `PbrBundle`, `ColorMaterial`, and
`ColorMesh2dBundle` since those cover most cases
- Mention the glTF/Bevy vocabulary discrepancy for "Mesh"
- Add an image for the example
- Various nitpicky modifications
## Note
- The image I added is 90.3ko which I think is small enough?
- Since rustdoc doesn't allow cross-reference not in dependencies of a
subcrate [yet](https://github.com/rust-lang/rust/issues/74481), I have a
lot of backtick references that are not links :(
- Since rustdoc doesn't allow linking to code in the crate (?) I put
link to github directly.
- Since rustdoc doesn't allow embed images in doc
[yet](https://github.com/rust-lang/rust/issues/32104), maybe
[soon](https://github.com/rust-lang/rfcs/pull/3397), I had to put only a
link to the image. I don't think it's worth adding
[embed_doc_image](https://docs.rs/embed-doc-image/latest/embed_doc_image/)
as a dependency for this.
# Objective
This PR updates the name of the enum variant used in the docs for
`OrthographicProjection`.
## Solution
- Change the outdated 'WindowScale` to `WindowSize`.
# Objective
- Reduce the number of rebindings to enable batching of draw commands
## Solution
- Use the new `GpuArrayBuffer` for `MeshUniform` data to store all
`MeshUniform` data in arrays within fewer bindings
- Sort opaque/alpha mask prepass, opaque/alpha mask main, and shadow
phases also by the batch per-object data binding dynamic offset to
improve performance on WebGL2.
---
## Changelog
- Changed: Per-object `MeshUniform` data is now managed by
`GpuArrayBuffer` as arrays in buffers that need to be indexed into.
## Migration Guide
Accessing the `model` member of an individual mesh object's shader
`Mesh` struct the old way where each `MeshUniform` was stored at its own
dynamic offset:
```rust
struct Vertex {
@location(0) position: vec3<f32>,
};
fn vertex(vertex: Vertex) -> VertexOutput {
var out: VertexOutput;
out.clip_position = mesh_position_local_to_clip(
mesh.model,
vec4<f32>(vertex.position, 1.0)
);
return out;
}
```
The new way where one needs to index into the array of `Mesh`es for the
batch:
```rust
struct Vertex {
@builtin(instance_index) instance_index: u32,
@location(0) position: vec3<f32>,
};
fn vertex(vertex: Vertex) -> VertexOutput {
var out: VertexOutput;
out.clip_position = mesh_position_local_to_clip(
mesh[vertex.instance_index].model,
vec4<f32>(vertex.position, 1.0)
);
return out;
}
```
Note that using the instance_index is the default way to pass the
per-object index into the shader, but if you wish to do custom rendering
approaches you can pass it in however you like.
---------
Co-authored-by: robtfm <50659922+robtfm@users.noreply.github.com>
Co-authored-by: Elabajaba <Elabajaba@users.noreply.github.com>
This is not used directly within the rendering code.
# Objective
- Remove extraneous dependency on `wgpu-hal` as it is not used.
## Solution
- The dependency has been removed and should have no externally visible
impact.
# Objective
The `QueryParIter::for_each_mut` function is required when doing
parallel iteration with mutable queries.
This results in an unfortunate stutter:
`query.par_iter_mut().par_for_each_mut()` ('mut' is repeated).
## Solution
- Make `for_each` compatible with mutable queries, and deprecate
`for_each_mut`. In order to prevent `for_each` from being called
multiple times in parallel, we take ownership of the QueryParIter.
---
## Changelog
- `QueryParIter::for_each` is now compatible with mutable queries.
`for_each_mut` has been deprecated as it is now redundant.
## Migration Guide
The method `QueryParIter::for_each_mut` has been deprecated and is no
longer functional. Use `for_each` instead, which now supports mutable
queries.
```rust
// Before:
query.par_iter_mut().for_each_mut(|x| ...);
// After:
query.par_iter_mut().for_each(|x| ...);
```
The method `QueryParIter::for_each` now takes ownership of the
`QueryParIter`, rather than taking a shared reference.
```rust
// Before:
let par_iter = my_query.par_iter().batching_strategy(my_batching_strategy);
par_iter.for_each(|x| {
// ...Do stuff with x...
par_iter.for_each(|y| {
// ...Do nested stuff with y...
});
});
// After:
my_query.par_iter().batching_strategy(my_batching_strategy).for_each(|x| {
// ...Do stuff with x...
my_query.par_iter().batching_strategy(my_batching_strategy).for_each(|y| {
// ...Do nested stuff with y...
});
});
```
# Objective
Fixes#9121
Context:
- `ImageTextureLoader` depends on `RenderDevice` to work out which
compressed image formats it can support
- `RenderDevice` is initialised by `RenderPlugin`
- https://github.com/bevyengine/bevy/pull/8336 made `RenderPlugin`
initialisation async
- This caused `RenderDevice` to be missing at the time of
`ImageTextureLoader` initialisation, which in turn meant UASTC encoded
ktx2 textures were being converted to unsupported formats, and thus
caused panics
## Solution
- Delay `ImageTextureLoader` initialisation
---
## Changelog
- Moved `ImageTextureLoader` initialisation from `ImagePlugin::build()`
to `ImagePlugin::finish()`
- Default to `CompressedImageFormats::NONE` if `RenderDevice` resource
is missing
---------
Co-authored-by: 66OJ66 <hi0obxud@anonaddy.me>
# Objective
Fix#8936.
## Solution
Stop using `unwrap` in the core pipelined rendering logic flow.
Separately also scoped the `sub app` span to just running the render app
instead of including the blocking send.
Current unknowns: should we use `std::panic::catch_unwind` around
running the render app? Other engine threads use it defensively, but
we're letting it bubble up here, and a user-created panic could cause a
deadlock if it kills the thread.
---
## Changelog
Fixed: Pipelined rendering should no longer have spurious panics upon
app exit.
# Objective
- Add a type for uploading a Rust `Vec<T>` to a GPU `array<T>`.
- Makes progress towards https://github.com/bevyengine/bevy/issues/89.
## Solution
- Port @superdump's `BatchedUniformBuffer` to bevy main, as a fallback
for WebGL2, which doesn't support storage buffers.
- Rather than getting an `array<T>` in a shader, you get an `array<T,
N>`, and have to rebind every N elements via dynamic offsets.
- Add `GpuArrayBuffer` to abstract over
`StorageBuffer<Vec<T>>`/`BatchedUniformBuffer`.
## Future Work
Add a shader macro kinda thing to abstract over the following
automatically:
https://github.com/bevyengine/bevy/pull/8204#pullrequestreview-1396911727
---
## Changelog
* Added `GpuArrayBuffer`, `GpuComponentArrayBufferPlugin`,
`GpuArrayBufferable`, and `GpuArrayBufferIndex` types.
* Added `DynamicUniformBuffer::new_with_alignment()`.
---------
Co-authored-by: Robert Swain <robert.swain@gmail.com>
Co-authored-by: François <mockersf@gmail.com>
Co-authored-by: Teodor Tanasoaia <28601907+teoxoy@users.noreply.github.com>
Co-authored-by: IceSentry <IceSentry@users.noreply.github.com>
Co-authored-by: Vincent <9408210+konsolas@users.noreply.github.com>
Co-authored-by: robtfm <50659922+robtfm@users.noreply.github.com>
# Objective
AssetPath shader imports check if the shader is added using the path
without quotes. this causes them to be re-added even if already present,
which can cause previous dependents to get unloaded leading to a
"missing import" error.
## Solution
fix the module name of AssetPath shaders used for checking if it's
already added to correctly use the quoted name.
# Objective
Continue #7867 now that we have URect #7984
- Return `URect` instead of `(UVec2, UVec2)` in
`Camera::physical_viewport_rect`
- Add `URect` and `IRect` to prelude
## Changelog
- Changed `Camera::physical_viewport_rect` return type from `(UVec2,
UVec2)` to `URect`
- `URect` and `IRect` were added to prelude
## Migration Guide
Before:
```rust
fn view_physical_camera_rect(camera_query: Query<&Camera>) {
let camera = camera_query.single();
let Some((min, max)) = camera.physical_viewport_rect() else { return };
dbg!(min, max);
}
```
After:
```rust
fn view_physical_camera_rect(camera_query: Query<&Camera>) {
let camera = camera_query.single();
let Some(URect { min, max }) = camera.physical_viewport_rect() else { return };
dbg!(min, max);
}
```
CI-capable version of #9086
---------
Co-authored-by: Bevy Auto Releaser <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: François <mockersf@gmail.com>
# Objective
Fix typos throughout the project.
## Solution
[`typos`](https://github.com/crate-ci/typos) project was used for
scanning, but no automatic corrections were applied. I checked
everything by hand before fixing.
Most of the changes are documentation/comments corrections. Also, there
are few trivial changes to code (variable name, pub(crate) function name
and a few error/panic messages).
## Unsolved
`bevy_reflect_derive` has
[typo](1b51053f19/crates/bevy_reflect/bevy_reflect_derive/src/type_path.rs (L76))
in enum variant name that I didn't fix. Enum is `pub(crate)`, so there
shouldn't be any trouble if fixed. However, code is tightly coupled with
macro usage, so I decided to leave it for more experienced contributor
just in case.
I created this manually as Github didn't want to run CI for the
workflow-generated PR. I'm guessing we didn't hit this in previous
releases because we used bors.
Co-authored-by: Bevy Auto Releaser <41898282+github-actions[bot]@users.noreply.github.com>
# Objective
bevy_render currently has a dependency on a random older version of
once_cell which is not used anywhere.
## Solution
Remove the dependency
## Changelog
N/A
## Migration Guide
N/A
# Objective
**This implementation is based on
https://github.com/bevyengine/rfcs/pull/59.**
---
Resolves#4597
Full details and motivation can be found in the RFC, but here's a brief
summary.
`FromReflect` is a very powerful and important trait within the
reflection API. It allows Dynamic types (e.g., `DynamicList`, etc.) to
be formed into Real ones (e.g., `Vec<i32>`, etc.).
This mainly comes into play concerning deserialization, where the
reflection deserializers both return a `Box<dyn Reflect>` that almost
always contain one of these Dynamic representations of a Real type. To
convert this to our Real type, we need to use `FromReflect`.
It also sneaks up in other ways. For example, it's a required bound for
`T` in `Vec<T>` so that `Vec<T>` as a whole can be made `FromReflect`.
It's also required by all fields of an enum as it's used as part of the
`Reflect::apply` implementation.
So in other words, much like `GetTypeRegistration` and `Typed`, it is
very much a core reflection trait.
The problem is that it is not currently treated like a core trait and is
not automatically derived alongside `Reflect`. This makes using it a bit
cumbersome and easy to forget.
## Solution
Automatically derive `FromReflect` when deriving `Reflect`.
Users can then choose to opt-out if needed using the
`#[reflect(from_reflect = false)]` attribute.
```rust
#[derive(Reflect)]
struct Foo;
#[derive(Reflect)]
#[reflect(from_reflect = false)]
struct Bar;
fn test<T: FromReflect>(value: T) {}
test(Foo); // <-- OK
test(Bar); // <-- Panic! Bar does not implement trait `FromReflect`
```
#### `ReflectFromReflect`
This PR also automatically adds the `ReflectFromReflect` (introduced in
#6245) registration to the derived `GetTypeRegistration` impl— if the
type hasn't opted out of `FromReflect` of course.
<details>
<summary><h4>Improved Deserialization</h4></summary>
> **Warning**
> This section includes changes that have since been descoped from this
PR. They will likely be implemented again in a followup PR. I am mainly
leaving these details in for archival purposes, as well as for reference
when implementing this logic again.
And since we can do all the above, we might as well improve
deserialization. We can now choose to deserialize into a Dynamic type or
automatically convert it using `FromReflect` under the hood.
`[Un]TypedReflectDeserializer::new` will now perform the conversion and
return the `Box`'d Real type.
`[Un]TypedReflectDeserializer::new_dynamic` will work like what we have
now and simply return the `Box`'d Dynamic type.
```rust
// Returns the Real type
let reflect_deserializer = UntypedReflectDeserializer::new(®istry);
let mut deserializer = ron:🇩🇪:Deserializer::from_str(input)?;
let output: SomeStruct = reflect_deserializer.deserialize(&mut deserializer)?.take()?;
// Returns the Dynamic type
let reflect_deserializer = UntypedReflectDeserializer::new_dynamic(®istry);
let mut deserializer = ron:🇩🇪:Deserializer::from_str(input)?;
let output: DynamicStruct = reflect_deserializer.deserialize(&mut deserializer)?.take()?;
```
</details>
---
## Changelog
* `FromReflect` is now automatically derived within the `Reflect` derive
macro
* This includes auto-registering `ReflectFromReflect` in the derived
`GetTypeRegistration` impl
* ~~Renamed `TypedReflectDeserializer::new` and
`UntypedReflectDeserializer::new` to
`TypedReflectDeserializer::new_dynamic` and
`UntypedReflectDeserializer::new_dynamic`, respectively~~ **Descoped**
* ~~Changed `TypedReflectDeserializer::new` and
`UntypedReflectDeserializer::new` to automatically convert the
deserialized output using `FromReflect`~~ **Descoped**
## Migration Guide
* `FromReflect` is now automatically derived within the `Reflect` derive
macro. Items with both derives will need to remove the `FromReflect`
one.
```rust
// OLD
#[derive(Reflect, FromReflect)]
struct Foo;
// NEW
#[derive(Reflect)]
struct Foo;
```
If using a manual implementation of `FromReflect` and the `Reflect`
derive, users will need to opt-out of the automatic implementation.
```rust
// OLD
#[derive(Reflect)]
struct Foo;
impl FromReflect for Foo {/* ... */}
// NEW
#[derive(Reflect)]
#[reflect(from_reflect = false)]
struct Foo;
impl FromReflect for Foo {/* ... */}
```
<details>
<summary><h4>Removed Migrations</h4></summary>
> **Warning**
> This section includes changes that have since been descoped from this
PR. They will likely be implemented again in a followup PR. I am mainly
leaving these details in for archival purposes, as well as for reference
when implementing this logic again.
* The reflect deserializers now perform a `FromReflect` conversion
internally. The expected output of `TypedReflectDeserializer::new` and
`UntypedReflectDeserializer::new` is no longer a Dynamic (e.g.,
`DynamicList`), but its Real counterpart (e.g., `Vec<i32>`).
```rust
let reflect_deserializer =
UntypedReflectDeserializer::new_dynamic(®istry);
let mut deserializer = ron:🇩🇪:Deserializer::from_str(input)?;
// OLD
let output: DynamicStruct = reflect_deserializer.deserialize(&mut
deserializer)?.take()?;
// NEW
let output: SomeStruct = reflect_deserializer.deserialize(&mut
deserializer)?.take()?;
```
Alternatively, if this behavior isn't desired, use the
`TypedReflectDeserializer::new_dynamic` and
`UntypedReflectDeserializer::new_dynamic` methods instead:
```rust
// OLD
let reflect_deserializer = UntypedReflectDeserializer::new(®istry);
// NEW
let reflect_deserializer =
UntypedReflectDeserializer::new_dynamic(®istry);
```
</details>
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
Added `GizmoConfig::render_layers`, which will ensure Gizmos are only
rendered on cameras that can see those `RenderLayers`.
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
operate on naga IR directly to improve handling of shader modules.
- give codespan reporting into imported modules
- allow glsl to be used from wgsl and vice-versa
the ultimate objective is to make it possible to
- provide user hooks for core shader functions (to modify light
behaviour within the standard pbr pipeline, for example)
- make automatic binding slot allocation possible
but ... since this is already big, adds some value and (i think) is at
feature parity with the existing code, i wanted to push this now.
## Solution
i made a crate called naga_oil (https://github.com/robtfm/naga_oil -
unpublished for now, could be part of bevy) which manages modules by
- building each module independantly to naga IR
- creating "header" files for each supported language, which are used to
build dependent modules/shaders
- make final shaders by combining the shader IR with the IR for imported
modules
then integrated this into bevy, replacing some of the existing shader
processing stuff. also reworked examples to reflect this.
## Migration Guide
shaders that don't use `#import` directives should work without changes.
the most notable user-facing difference is that imported
functions/variables/etc need to be qualified at point of use, and
there's no "leakage" of visible stuff into your shader scope from the
imports of your imports, so if you used things imported by your imports,
you now need to import them directly and qualify them.
the current strategy of including/'spreading' `mesh_vertex_output`
directly into a struct doesn't work any more, so these need to be
modified as per the examples (e.g. color_material.wgsl, or many others).
mesh data is assumed to be in bindgroup 2 by default, if mesh data is
bound into bindgroup 1 instead then the shader def `MESH_BINDGROUP_1`
needs to be added to the pipeline shader_defs.
# Objective
- Closes#7323
- Reduce texture blurriness for TAA
## Solution
- Add a `MipBias` component and view uniform.
- Switch material `textureSample()` calls to `textureSampleBias()`.
- Add a `-1.0` bias to TAA.
---
## Changelog
- Added `MipBias` camera component, mostly for internal use.
---------
Co-authored-by: François <mockersf@gmail.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
- Add morph targets to `bevy_pbr` (closes#5756) & load them from glTF
- Supersedes #3722
- Fixes#6814
[Morph targets][1] (also known as shape interpolation, shape keys, or
blend shapes) allow animating individual vertices with fine grained
controls. This is typically used for facial expressions. By specifying
multiple poses as vertex offset, and providing a set of weight of each
pose, it is possible to define surprisingly realistic transitions
between poses. Blending between multiple poses also allow composition.
Morph targets are part of the [gltf standard][2] and are a feature of
Unity and Unreal, and babylone.js, it is only natural to implement them
in bevy.
## Solution
This implementation of morph targets uses a 3d texture where each pixel
is a component of an animated attribute. Each layer is a different
target. We use a 2d texture for each target, because the number of
attribute×components×animated vertices is expected to always exceed the
maximum pixel row size limit of webGL2. It copies fairly closely the way
skinning is implemented on the CPU side, while on the GPU side, the
shader morph target implementation is a relatively trivial detail.
We add an optional `morph_texture` to the `Mesh` struct. The
`morph_texture` is built through a method that accepts an iterator over
attribute buffers.
The `MorphWeights` component, user-accessible, controls the blend of
poses used by mesh instances (so that multiple copy of the same mesh may
have different weights), all the weights are uploaded to a uniform
buffer of 256 `f32`. We limit to 16 poses per mesh, and a total of 256
poses.
More literature:
* Old babylone.js implementation (vertex attribute-based):
https://www.eternalcoding.com/dev-log-1-morph-targets/
* Babylone.js implementation (similar to ours):
https://www.youtube.com/watch?v=LBPRmGgU0PE
* GPU gems 3:
https://developer.nvidia.com/gpugems/gpugems3/part-i-geometry/chapter-3-directx-10-blend-shapes-breaking-limits
* Development discord thread
https://discord.com/channels/691052431525675048/1083325980615114772https://user-images.githubusercontent.com/26321040/231181046-3bca2ab2-d4d9-472e-8098-639f1871ce2e.mp4https://github.com/bevyengine/bevy/assets/26321040/d2a0c544-0ef8-45cf-9f99-8c3792f5a258
## Acknowledgements
* Thanks to `storytold` for sponsoring the feature
* Thanks to `superdump` and `james7132` for guidance and help figuring
out stuff
## Future work
- Handling of less and more attributes (eg: animated uv, animated
arbitrary attributes)
- Dynamic pose allocation (so that zero-weighted poses aren't uploaded
to GPU for example, enables much more total poses)
- Better animation API, see #8357
----
## Changelog
- Add morph targets to bevy meshes
- Support up to 64 poses per mesh of individually up to 116508 vertices,
animation currently strictly limited to the position, normal and tangent
attributes.
- Load a morph target using `Mesh::set_morph_targets`
- Add `VisitMorphTargets` and `VisitMorphAttributes` traits to
`bevy_render`, this allows defining morph targets (a fairly complex and
nested data structure) through iterators (ie: single copy instead of
passing around buffers), see documentation of those traits for details
- Add `MorphWeights` component exported by `bevy_render`
- `MorphWeights` control mesh's morph target weights, blending between
various poses defined as morph targets.
- `MorphWeights` are directly inherited by direct children (single level
of hierarchy) of an entity. This allows controlling several mesh
primitives through a unique entity _as per GLTF spec_.
- Add `MorphTargetNames` component, naming each indices of loaded morph
targets.
- Load morph targets weights and buffers in `bevy_gltf`
- handle morph targets animations in `bevy_animation` (previously, it
was a `warn!` log)
- Add the `MorphStressTest.gltf` asset for morph targets testing, taken
from the glTF samples repo, CC0.
- Add morph target manipulation to `scene_viewer`
- Separate the animation code in `scene_viewer` from the rest of the
code, reducing `#[cfg(feature)]` noise
- Add the `morph_targets.rs` example to show off how to manipulate morph
targets, loading `MorpStressTest.gltf`
## Migration Guide
- (very specialized, unlikely to be touched by 3rd parties)
- `MeshPipeline` now has a single `mesh_layouts` field rather than
separate `mesh_layout` and `skinned_mesh_layout` fields. You should
handle all possible mesh bind group layouts in your implementation
- You should also handle properly the new `MORPH_TARGETS` shader def and
mesh pipeline key. A new function is exposed to make this easier:
`setup_moprh_and_skinning_defs`
- The `MeshBindGroup` is now `MeshBindGroups`, cached bind groups are
now accessed through the `get` method.
[1]: https://en.wikipedia.org/wiki/Morph_target_animation
[2]:
https://registry.khronos.org/glTF/specs/2.0/glTF-2.0.html#morph-targets
---------
Co-authored-by: François <mockersf@gmail.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
Improve the documentation relating to windows, and update the parts that
have not been updated since version 0.8.
Version 0.9 introduced `Window` as a component, before that
`WindowDescriptor` (which would become `Window` later) was used to store
information about how a window will be created. Since version 0.9, from
my understanding, this information will also be synchronised with the
current state of the window, and can be used to modify this state.
However, some of the documentation has not been updated to reflect that,
here is an example:
https://docs.rs/bevy/0.8.0/bevy/window/enum.WindowMode.html /
https://docs.rs/bevy/latest/bevy/window/enum.WindowMode.html (notice
that the verb "Creates" is still there).
This PR aims at improving the documentation relating to windows.
## Solution
- Change "will" for "should" when relevant, "should" implies that the
information should in both direction (from the window state to the
`Window` component and vice-versa) and can be used to get and set, will
implies it is only used to set a state.
- Remove references to "creation" or be more clear about it.
- Reference back the `Window` component for most of its sub-structs.
- Clarify what needs to be clarified
- A lot of other minor changes, including fixing the link to W3schools
in `bevy_winit`
## Warning
Please note that my knowledge about how winit and bevy_winit work is
limited and some of the informations I added in the doc may be
inaccurate. A person who knows better how it works should review some of
my claims, in particular:
- How fullscreen works:
https://github.com/bevyengine/bevy/pull/8858#discussion_r1232413155
- How WindowResolution / sizes work:
https://github.com/bevyengine/bevy/pull/8858#discussion_r1233010719
- What happens when `WindowPosition` is set to `Centered` or
`Automatic`. From my understanding of the code, it should always be set
back to `At`, but is it really the case? For example [when creating the
window](https://github.com/bevyengine/bevy/blob/main/crates/bevy_winit/src/winit_windows.rs#L74),
or when [a `WindowEvent::Moved` is
triggered](https://github.com/bevyengine/bevy/blob/main/crates/bevy_winit/src/lib.rs#L602)
or when [Centered/Automatic by the code after the window is
created](https://github.com/bevyengine/bevy/blob/main/crates/bevy_winit/src/system.rs#L243),
am I missing some cases and do the codes I linked do that in all of
them?
- Are there any field in the `Window` component that can't be used to
modify the state of the window, only at creation?
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Jerome Humbert <djeedai@gmail.com>
# Objective
- Fix the AsBindGroup texture attribute visibility flag parsing
- This appears to have been caused by a syn crate update which then the
visibility code got updated
- Also I noticed that by default the vertex and fragment flags were on,
so visibility(compute) would actually make the texture visible to
vertex, fragment and compute shaders, I fixed this too
## Solution
- Update flag parsing to use MetaList.parse_nested_meta function, which
loads the flags into a Vec then loop through those flags
- Change initial visibility flags to use VisibilityFlags::default()
rather than VisibilityFlags::vertex_fragment()
# Objective
- Better consistency with `add_systems`.
- Deprecating `add_plugin` in favor of a more powerful `add_plugins`.
- Allow passing `Plugin` to `add_plugins`.
- Allow passing tuples to `add_plugins`.
## Solution
- `App::add_plugins` now takes an `impl Plugins` parameter.
- `App::add_plugin` is deprecated.
- `Plugins` is a new sealed trait that is only implemented for `Plugin`,
`PluginGroup` and tuples over `Plugins`.
- All examples, benchmarks and tests are changed to use `add_plugins`,
using tuples where appropriate.
---
## Changelog
### Changed
- `App::add_plugins` now accepts all types that implement `Plugins`,
which is implemented for:
- Types that implement `Plugin`.
- Types that implement `PluginGroup`.
- Tuples (up to 16 elements) over types that implement `Plugins`.
- Deprecated `App::add_plugin` in favor of `App::add_plugins`.
## Migration Guide
- Replace `app.add_plugin(plugin)` calls with `app.add_plugins(plugin)`.
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
- Providing a "noob-friendly" example since not many people are
proficient in 3D modeling / rendering concepts.
## Solution
- Adding more information to the example, with an explanation.
~~~~
_Thanks to Nocta on discord for helping out when I didn't understand the
subject well._
---------
Co-authored-by: François <mockersf@gmail.com>
# Objective
Fixes#6920
## Solution
From the issue discussion:
> From looking at the `AsBindGroup` derive macro implementation, the
fallback image's `TextureView` is used when the binding's
`Option<Handle<Image>>` is `None`. Because this relies on already having
a view that matches the desired binding dimensions, I think the solution
will require creating a separate `GpuImage` for each possible
`TextureViewDimension`.
---
## Changelog
Users can now rely on `FallbackImage` to work with a texture binding of
any dimension.
# Objective
Discovered that PointLight did not implement FromReflect. Adding
FromReflect where Reflect is used. I overreached and applied this rule
everywhere there was a Reflect without a FromReflect, except from where
the compiler wouldn't allow me.
Based from question: https://github.com/bevyengine/bevy/discussions/8774
## Solution
- Adding FromReflect where Reflect was already derived
## Notes
First PR I do in this ecosystem, so not sure if this is the usual
approach, that is, to touch many files at once.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
We can currently set `camera.target` to either an `Image` or `Window`.
For OpenXR & WebXR we need to be able to render to a `TextureView`.
This partially addresses #115 as with the addition we can create
internal and external xr crates.
## Solution
A `TextureView` item is added to the `RenderTarget` enum. It holds an id
which is looked up by a `ManualTextureViews` resource, much like how
`Assets<Image>` works.
I believe this approach was first used by @kcking in their [xr
fork](eb39afd51b/crates/bevy_render/src/camera/camera.rs (L322)).
The only change is that a `u32` is used to index the textures as
`FromReflect` does not support `uuid` and I don't know how to implement
that.
---
## Changelog
### Added
Render: Added `RenderTarget::TextureView` as a `camera.target` option,
enabling rendering directly to a `TextureView`.
## Migration Guide
References to the `RenderTarget` enum will need to handle the additional
field, ie in `match` statements.
---
## Comments
- The [wgpu
work](c039a74884)
done by @expenses allows us to create framebuffer texture views from
`wgpu v0.15, bevy 0.10`.
- I got the WebXR techniques from the [xr
fork](https://github.com/dekuraan/xr-bevy) by @dekuraan.
- I have tested this with a wip [external webxr
crate](018e22bb06/crates/bevy_webxr/src/bevy_utils/xr_render.rs (L50))
on an Oculus Quest 2.
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
Co-authored-by: Paul Hansen <mail@paul.rs>
# Objective
Fix https://github.com/bevyengine/bevy/issues/1018 (Textures on the
`Plane` shape appear flipped).
This bug have been around for a very long time apparently, I tested it
was still there (see test code bellow) and sure enough, this image:
... is flipped vertically when used as a texture on a plane (in main,
0.10.1 and 0.9):
I'm pretty confused because this bug is so easy to fix, it has been
around for so long, it is easy to encounter, and PRs touching this code
still didn't fix it: https://github.com/bevyengine/bevy/pull/7546 To the
point where I'm wondering if it's actually intended. If it is, please
explain why and this PR can be changed to "mention that in the doc".
## Solution
Fix the UV mapping on the Plane shape
Here is how it looks after the PR
## Test code
```rust
use bevy::{
prelude::*,
};
fn main () {
App::new()
.add_plugins(DefaultPlugins)
.add_startup_system(setup)
.run();
}
fn setup(
mut commands: Commands,
assets: ResMut<AssetServer>,
mut meshes: ResMut<Assets<Mesh>>,
mut materials: ResMut<Assets<StandardMaterial>>,
) {
commands.spawn(Camera3dBundle {
transform: Transform::from_xyz(0., 3., 0.).looking_at(Vec3::ZERO, Vec3::NEG_Z),
..default()
});
let mesh = meshes.add(Mesh::from(shape::Plane::default()));
let texture_image = assets.load("test.png");
let material = materials.add(StandardMaterial {
base_color_texture: Some(texture_image),
..default()
});
commands.spawn(PbrBundle {
mesh,
material,
..default()
});
}
```
## Changelog
Fix textures on `Plane` shapes being flipped vertically.
## Migration Guide
Flip the textures you use on `Plane` shapes.
# Objective
- Rename the `render::primitives::Plane` struct as to not confuse it
with `bevy_render::mesh::shape::Plane`
- Fixes https://github.com/bevyengine/bevy/issues/8730
## Solution
- Refactor the `render::primitives::Plane` struct to
`render::primitives::HalfSpace`
- Modify documentation to reflect this change
## Changelog
- Renamed `Plane` to `HalfSpace` to more accurately represent it's use
- Renamed `planes` member in `Frustum` to `half_spaces` to reflect
changes
## Migration Guide
- `Plane` has been renamed to `HalfSpace`
- `planes` member in `Frustum` has been renamed to `half_spaces`
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Nicola Papale <nicopap@users.noreply.github.com>
# Objective
- When a window is closed, the associated camera keeps rendering even if
the RenderTarget isn't valid anymore.
- This is essentially just wasting a lot of performance.
## Solution
- Detect the window close event and disable any camera that used the
window has a RenderTarget.
## Notes
It's possible a similar thing could be done for camera that use an image
handle, but I would fix that in a separate PR.
# Objective
`NoFrustumCulling` doesn't implement `Reflect`, while nothing prevents
it from implementing it.
## Solution
Implement `Reflect` for it.
---
## Changelog
- Add `Reflect` derive to `NoFrustrumCulling`.
- Add `FromReflect` derive to `Visibility`.
Updates the requirements on
[ruzstd](https://github.com/KillingSpark/zstd-rs) to permit the latest
version.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/KillingSpark/zstd-rs/releases">ruzstd's
releases</a>.</em></p>
<blockquote>
<h2>No-std support and better dict API</h2>
<p>This release features no-std support with big thanks to <a
href="https://github.com/antangelo"><code>@antangelo</code></a>!</p>
<p>Also the API for dictionaries has been revised, which required some
breaking changes in that department</p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="fa7bd9c7b3"><code>fa7bd9c</code></a>
allow streaming decoder to also be used with a &mut FrameDecoder for
easier r...</li>
<li><a
href="3b6403b8e7"><code>3b6403b</code></a>
reenable forcing a different dict</li>
<li><a
href="2be7fbb01b"><code>2be7fbb</code></a>
Merge pull request <a
href="https://redirect.github.com/KillingSpark/zstd-rs/issues/40">#40</a>
from KillingSpark/overhaul_dicts</li>
<li><a
href="343d69b339"><code>343d69b</code></a>
no need to check that the dict still matches at the start of each decode
call</li>
<li><a
href="d73f5e689a"><code>d73f5e6</code></a>
cargo fmt</li>
<li><a
href="f3f09c76f0"><code>f3f09c7</code></a>
improve initing the decoder from a dict</li>
<li><a
href="0b9331dd19"><code>0b9331d</code></a>
make clippy happy</li>
<li><a
href="06433dec34"><code>06433de</code></a>
start overhauling dict API</li>
<li><a
href="1256944604"><code>1256944</code></a>
Update ci.yml</li>
<li><a
href="3449d0a2bf"><code>3449d0a</code></a>
Merge pull request <a
href="https://redirect.github.com/KillingSpark/zstd-rs/issues/39">#39</a>
from antangelo/no_std</li>
<li>Additional commits viewable in <a
href="https://github.com/KillingSpark/zstd-rs/compare/v0.3.1...v0.4.0">compare
view</a></li>
</ul>
</details>
<br />
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Objective
- Introduce a stable alternative to
[`std::any::type_name`](https://doc.rust-lang.org/std/any/fn.type_name.html).
- Rewrite of #5805 with heavy inspiration in design.
- On the path to #5830.
- Part of solving #3327.
## Solution
- Add a `TypePath` trait for static stable type path/name information.
- Add a `TypePath` derive macro.
- Add a `impl_type_path` macro for implementing internal and foreign
types in `bevy_reflect`.
---
## Changelog
- Added `TypePath` trait.
- Added `DynamicTypePath` trait and `get_type_path` method to `Reflect`.
- Added a `TypePath` derive macro.
- Added a `bevy_reflect::impl_type_path` for implementing `TypePath` on
internal and foreign types in `bevy_reflect`.
- Changed `bevy_reflect::utility::(Non)GenericTypeInfoCell` to
`(Non)GenericTypedCell<T>` which allows us to be generic over both
`TypeInfo` and `TypePath`.
- `TypePath` is now a supertrait of `Asset`, `Material` and
`Material2d`.
- `impl_reflect_struct` needs a `#[type_path = "..."]` attribute to be
specified.
- `impl_reflect_value` needs to either specify path starting with a
double colon (`::core::option::Option`) or an `in my_crate::foo`
declaration.
- Added `bevy_reflect_derive::ReflectTypePath`.
- Most uses of `Ident` in `bevy_reflect_derive` changed to use
`ReflectTypePath`.
## Migration Guide
- Implementors of `Asset`, `Material` and `Material2d` now also need to
derive `TypePath`.
- Manual implementors of `Reflect` will need to implement the new
`get_type_path` method.
## Open Questions
- [x] ~This PR currently does not migrate any usages of
`std::any::type_name` to use `bevy_reflect::TypePath` to ease the review
process. Should it?~ Migration will be left to a follow-up PR.
- [ ] This PR adds a lot of `#[derive(TypePath)]` and `T: TypePath` to
satisfy new bounds, mostly when deriving `TypeUuid`. Should we make
`TypePath` a supertrait of `TypeUuid`? [Should we remove `TypeUuid` in
favour of
`TypePath`?](2afbd85532 (r961067892))
# Objective
- `apply_system_buffers` is an unhelpful name: it introduces a new
internal-only concept
- this is particularly rough for beginners as reasoning about how
commands work is a critical stumbling block
## Solution
- rename `apply_system_buffers` to the more descriptive `apply_deferred`
- rename related fields, arguments and methods in the internals fo
bevy_ecs for consistency
- update the docs
## Changelog
`apply_system_buffers` has been renamed to `apply_deferred`, to more
clearly communicate its intent and relation to `Deferred` system
parameters like `Commands`.
## Migration Guide
- `apply_system_buffers` has been renamed to `apply_deferred`
- the `apply_system_buffers` method on the `System` trait has been
renamed to `apply_deferred`
- the `is_apply_system_buffers` function has been replaced by
`is_apply_deferred`
- `Executor::set_apply_final_buffers` is now
`Executor::set_apply_final_deferred`
- `Schedule::apply_system_buffers` is now `Schedule::apply_deferred`
---------
Co-authored-by: JoJoJet <21144246+JoJoJet@users.noreply.github.com>
- Supress false positive `redundant_clone` lints.
- Supress inactionable `result_large_err` lint.
Most of the size(50 out of 68 bytes) is coming from
`naga::WithSpan<naga::valid::ValidationError>`
# Objective
- Make #8015 easier to review;
## Solution
- This commit contains changes not directly related to transmission
required by #8015, in easier-to-review, one-change-per-commit form.
---
## Changelog
### Fixed
- Clear motion vector prepass using `0.0` instead of `1.0`, to avoid TAA
artifacts on transparent objects against the background;
### Added
- The `E` mathematical constant is now available for use in shaders,
exposed under `bevy_pbr::utils`;
- A new `TAA` shader def is now available, for conditionally enabling
shader logic via `#ifdef` when TAA is enabled; (e.g. for jittering
texture samples)
- A new `FallbackImageZero` resource is introduced, for when a fallback
image filled with zeroes is required;
- A new `RenderPhase<I>::render_range()` method is introduced, for
render phases that need to render their items in multiple parceled out
“steps”;
### Changed
- The `MainTargetTextures` struct now holds both `Texture` and
`TextureViews` for the main textures;
- The fog shader functions under `bevy_pbr::fog` now take the a `Fog`
structure as their first argument, instead of relying on the global
`fog` uniform;
- The main textures can now be used as copy sources;
## Migration Guide
- `ViewTarget::main_texture()` and `ViewTarget::main_texture_other()`
now return `&Texture` instead of `&TextureView`. If you were relying on
these methods, replace your usage with
`ViewTarget::main_texture_view()`and
`ViewTarget::main_texture_other_view()`, respectively;
- `ViewTarget::sampled_main_texture()` now returns `Option<&Texture>`
instead of a `Option<&TextureView>`. If you were relying on this method,
replace your usage with `ViewTarget::sampled_main_texture_view()`;
- The `apply_fog()`, `linear_fog()`, `exponential_fog()`,
`exponential_squared_fog()` and `atmospheric_fog()` functions now take a
configurable `Fog` struct. If you were relying on them, update your
usage by adding the global `fog` uniform as their first argument;
# Objective
Fix#8604
## Solution
Use `.add_srgb_suffix()` when creating the screenshot texture.
Allow converting `Bgra8Unorm` images.
Only a two line change for the fix, the `screenshot.rs` changes are just
a bit of cleanup.
# Objective
Fix warnings:
```rs
warning: variable does not need to be mutable
--> /bevy/crates/bevy_app/src/plugin_group.rs:147:13
|
147 | let mut plugin_entry = self
| ----^^^^^^^^^^^^
| |
| help: remove this `mut`
|
= note: `#[warn(unused_mut)]` on by default
warning: variable does not need to be mutable
--> /bevy/crates/bevy_app/src/plugin_group.rs:161:13
|
161 | let mut plugin_entry = self
| ----^^^^^^^^^^^^
| |
| help: remove this `mut`
warning: `bevy_app` (lib) generated 2 warnings (run `cargo fix --lib -p bevy_app` to apply 2 suggestions)
warning: variable does not need to be mutable
--> /bevy/crates/bevy_render/src/view/window.rs:126:13
|
126 | ... let mut extracted_window = extracted_windows.entry(entity).or_insert(Extracte...
| ----^^^^^^^^^^^^^^^^
|
= note: `#[warn(unused_mut)]` on by default
warning: `bevy_render` (lib) generated 1 warning (run `cargo fix --lib -p bevy_render` to apply 1 suggestion)
```
## Solution
- Remove the mut keyword in those variables.
# Objective
- Update dependencies `ruzstd` and `basis-universal`
- Alternative to #5278 and #8133
## Solution
- Update the dependencies, fix the code
- Bevy now also depend on `syn@2` so it's not a blocker to update
`ruzstd` anymore
# Objective
Fix an out-of-date doc string.
The old doc string says "returns None if …" and "for a given
descriptor",
but this method neither takes an argument or returns an `Option`.
# Objective
Add support for the [Netpbm](https://en.wikipedia.org/wiki/Netpbm) image
formats, behind a `pnm` feature flag.
My personal use case for this was robotics applications, with `pgm`
being a popular format used in the field to represent world maps in
robots.
I chose the formats and feature name by checking the logic in
[image.rs](a35ed552fa/crates/bevy_render/src/texture/image.rs (L76))
## Solution
Quite straightforward, the `pnm` feature flag already exists in the
`image` crate so it's just creating and exposing a `pnm` feature flag in
the root `Cargo.toml` and forwarding it through `bevy_internal` and
`bevy_render` all the way to the `image` crate.
---
## Changelog
### Added
`pnm` feature to add support for `pam`, `pbm`, `pgm` and `ppm` image
formats.
---------
Signed-off-by: Luca Della Vedova <lucadv@intrinsic.ai>
# Objective
- Fixes#3531
## Solution
- Added an append wrapper to BufferVec based on the function signature
for vec.append()
---
First PR to Bevy. I didn't see any tests for other BufferVec methods
(could have missed them) and currently this method is not used anywhere
in the project. Let me know if there are tests to add or if I should
find somewhere to use append so it is not dead code. The issue mentions
implementing `truncate` and `extend` which were already implemented and
merged
[here](https://github.com/bevyengine/bevy/pull/6833/files#diff-c8fb332382379e383f1811e30c31991b1e0feb38ca436c357971755368012ced)
# Objective
- When writing render nodes that need a view, you always need to define
a `Query` on the associated view and make sure to update it manually and
query it manually. This is verbose and error prone.
## Solution
- Introduce a new `ViewNode` trait and `ViewNodeRunner` `Node` that will
take care of managing the associated view query automatically.
- The trait is currently a passthrough of the `Node` trait. So it still
has the update/run with all the same data passed in.
- The `ViewNodeRunner` is the actual node that is added to the render
graph and it contains the custom node. This is necessary because it's
the one that takes care of updating the node.
---
## Changelog
- Add `ViewNode`
- Add `ViewNodeRunner`
## Notes
Currently, this only handles the view query, but it could probably have
a ReadOnlySystemState that would also simplify querying all the readonly
resources that most render nodes currently query manually. The issue is
that I don't know how to do that without a `&mut self`.
At first, I tried making this a default feature of all `Node`, but I
kept hitting errors related to traits and generics and stuff I'm not
super comfortable with. This implementations is much simpler and keeps
the default Node behaviour so isn't a breaking change
## Reviewer Notes
The PR looks quite big, but the core of the PR is the changes in
`render_graph/node.rs`. Every other change is simply updating existing
nodes to use this new feature.
## Open questions
~~- Naming is not final, I'm opened to anything. I named it
ViewQueryNode because it's a node with a managed Query on a View.~~
~~- What to do when the query fails? All nodes using this pattern
currently just `return Ok(())` when it fails, so I chose that, but
should it be more flexible?~~
~~- Is the ViewQueryFilter actually necessary? All view queries run on
the entity that is already guaranteed to be a view. Filtering won't do
much, but maybe someone wants to control an effect with the presence of
a component instead of a flag.~~
~~- What to do with Nodes that are empty struct? Implementing
`FromWorld` is pretty verbose but not implementing it means there's 2
ways to create a `ViewNodeRunner` which seems less ideal. This is an
issue now because most node simply existed to hold the query, but now
that they don't hold the query state we are left with a bunch of empty
structs.~~
- Should we have a `RenderGraphApp::add_render_graph_view_node()`, this
isn't necessary, but it could make the code a bit shorter.
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
- Fixes#8563
## Solution
~~- Implement From<Color> for [u8; 4]~~
~~- also implement From<[u8; 4]> for Color because why not.~~
- implement method `as_rgba_u8` in Color
---------
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
# Objective
- Support WebGPU
- alternative to #5027 that doesn't need any async / await
- fixes#8315
- Surprise fix#7318
## Solution
### For async renderer initialisation
- Update the plugin lifecycle:
- app builds the plugin
- calls `plugin.build`
- registers the plugin
- app starts the event loop
- event loop waits for `ready` of all registered plugins in the same
order
- returns `true` by default
- then call all `finish` then all `cleanup` in the same order as
registered
- then execute the schedule
In the case of the renderer, to avoid anything async:
- building the renderer plugin creates a detached task that will send
back the initialised renderer through a mutex in a resource
- `ready` will wait for the renderer to be present in the resource
- `finish` will take that renderer and place it in the expected
resources by other plugins
- other plugins (that expect the renderer to be available) `finish` are
called and they are able to set up their pipelines
- `cleanup` is called, only custom one is still for pipeline rendering
### For WebGPU support
- update the `build-wasm-example` script to support passing `--api
webgpu` that will build the example with WebGPU support
- feature for webgl2 was always enabled when building for wasm. it's now
in the default feature list and enabled on all platforms, so check for
this feature must also check that the target_arch is `wasm32`
---
## Migration Guide
- `Plugin::setup` has been renamed `Plugin::cleanup`
- `Plugin::finish` has been added, and plugins adding pipelines should
do it in this function instead of `Plugin::build`
```rust
// Before
impl Plugin for MyPlugin {
fn build(&self, app: &mut App) {
app.insert_resource::<MyResource>
.add_systems(Update, my_system);
let render_app = match app.get_sub_app_mut(RenderApp) {
Ok(render_app) => render_app,
Err(_) => return,
};
render_app
.init_resource::<RenderResourceNeedingDevice>()
.init_resource::<OtherRenderResource>();
}
}
// After
impl Plugin for MyPlugin {
fn build(&self, app: &mut App) {
app.insert_resource::<MyResource>
.add_systems(Update, my_system);
let render_app = match app.get_sub_app_mut(RenderApp) {
Ok(render_app) => render_app,
Err(_) => return,
};
render_app
.init_resource::<OtherRenderResource>();
}
fn finish(&self, app: &mut App) {
let render_app = match app.get_sub_app_mut(RenderApp) {
Ok(render_app) => render_app,
Err(_) => return,
};
render_app
.init_resource::<RenderResourceNeedingDevice>();
}
}
```
# Objective
- I want to take screenshots of examples in CI to help with validation
of changes
## Solution
- Can override how much time is updated per frame
- Can specify on which frame to take a screenshots
- Save screenshots in CI
I reused the `TimeUpdateStrategy::ManualDuration` to be able to set the
time update strategy to a fixed duration every frame. Its previous
meaning didn't make much sense to me. This change makes it possible to
have screenshots that are exactly the same across runs.
If this gets merged, I'll add visual comparison of screenshots between
runs to ensure nothing gets broken
## Migration Guide
* `TimeUpdateStrategy::ManualDuration` meaning has changed. Instead of
setting time to `Instant::now()` plus the given duration, it sets time
to last update plus the given duration.
# Objective
- Handle dangling entity references inside scenes
- Handle references to entities with generation > 0 inside scenes
- Fix a latent bug in `Parent`'s `MapEntities` implementation, which
would, if the parent was outside the scene, cause the scene to be loaded
into the new world with a parent reference potentially pointing to some
random entity in that new world.
- Fixes#4793 and addresses #7235
## Solution
- DynamicScenes now identify entities with a `Entity` instead of a u32,
therefore including generation
- `World` exposes a new `reserve_generations` function that despawns an
entity and advances its generation by some extra amount.
- `MapEntities` implementations have a new `get_or_reserve` function
available that will always return an `Entity`, establishing a new
mapping to a dead entity when the entity they are called with is not in
the `EntityMap`. Subsequent calls with that same `Entity` will return
the same newly created dead entity reference, preserving equality
semantics.
- As a result, after loading a scene containing references to dead
entities (or entities otherwise outside the scene), those references
will all point to different generations on a single entity id in the new
world.
---
## Changelog
### Changed
- In serialized scenes, entities are now identified by a u64 instead of
a u32.
- In serialized scenes, components with entity references now have those
references serialize as u64s instead of structs.
### Fixed
- Scenes containing components with entity references will now
deserialize and add to a world reliably.
## Migration Guide
- `MapEntities` implementations must change from a `&EntityMap`
parameter to a `&mut EntityMapper` parameter and can no longer return a
`Result`. Finally, they should switch from calling `EntityMap::get` to
calling `EntityMapper::get_or_reserve`.
---------
Co-authored-by: Nicola Papale <nicopap@users.noreply.github.com>
# Objective
- Enable taking a screenshot in wasm
- Followup on #7163
## Solution
- Create a blob from the image data, generate a url to that blob, add an
`a` element to the document linking to that url, click on that element,
then revoke the url
- This will automatically trigger a download of the screenshot file in
the browser
# Objective
- Updated to wgpu 0.16.0 and wgpu-hal 0.16.0
---
## Changelog
1. Upgrade wgpu to 0.16.0 and wgpu-hal to 0.16.0
2. Fix the error in native when using a filterable
`TextureSampleType::Float` on a multisample `BindingType::Texture`.
([https://github.com/gfx-rs/wgpu/pull/3686](https://github.com/gfx-rs/wgpu/pull/3686))
---------
Co-authored-by: François <mockersf@gmail.com>
# Objective
- Reduce compilation time
## Solution
- Make `spirv` and `glsl` shader format support optional. They are not
needed for Bevy shaders.
- on my mac (where shaders are compiled to `msl`), this reduces the
total build time by 2 to 5 seconds, improvement should be even better
with less cores
There is a big reduction in compile time for `naga`, and small
improvements on `wgpu` and `bevy_render`
This PR with optional shader formats enabled timings:
<img width="1478" alt="current main"
src="https://user-images.githubusercontent.com/8672791/234347032-cbd5c276-a9b0-49c3-b793-481677391c18.png">
This PR:
<img width="1479" alt="this pr"
src="https://user-images.githubusercontent.com/8672791/234347059-a67412a9-da8d-4356-91d8-7b0ae84ca100.png">
---
## Migration Guide
- If you want to use shaders in `spirv`, enable the
`shader_format_spirv` feature
- If you want to use shaders in `glsl`, enable the `shader_format_glsl`
feature
# Objective
`Camera::logical_viewport_rect()` returns `Option<(Vec2, Vec2)>` which
is a tuple of vectors representing the `(min, max)` bounds of the
viewport rect. Since the function says it returns a rect and there is a
`Rect { min, max }` struct in `bevy_math`, using the struct will be
clearer.
## Solution
Replaced `Option<(Vec2, Vec2)>` with `Option<Rect>` for
`Camera::logical_viewport_rect()`.
---
## Changelog
- Changed `Camera::logical_viewport_rect` return type from `(Vec2,
Vec2)` to `Rect`
## Migration Guide
Before:
```
fn view_logical_camera_rect(camera_query: Query<&Camera>) {
let camera = camera_query.single();
let Some((min, max)) = camera.logical_viewport_rect() else { return };
dbg!(min, max);
}
```
After:
```
fn view_logical_camera_rect(camera_query: Query<&Camera>) {
let camera = camera_query.single();
let Some(Rect { min, max }) = camera.logical_viewport_rect() else { return };
dbg!(min, max);
}
```
This line does not appear to be an intended part of the `Panics`
section, but instead looks like it was missed when copy-pasting a
`Panics` section from above.
It confused me when I was reading the docs. At first I read it as if it
was an imperative statement saying not to use `match` statements which
seemed odd and out of place. Once I saw the code it was clearly in err.
# Objective
- Cleanup documentation string to reduce end-user confusion.
Links in the api docs are nice. I noticed that there were several places
where structs / functions and other things were referenced in the docs,
but weren't linked. I added the links where possible / logical.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: François <mockersf@gmail.com>
Fixes https://github.com/bevyengine/bevy/issues/1207
# Objective
Right now, it's impossible to capture a screenshot of the entire window
without forking bevy. This is because
- The swapchain texture never has the COPY_SRC usage
- It can't be accessed without taking ownership of it
- Taking ownership of it breaks *a lot* of stuff
## Solution
- Introduce a dedicated api for taking a screenshot of a given bevy
window, and guarantee this screenshot will always match up with what
gets put on the screen.
---
## Changelog
- Added the `ScreenshotManager` resource with two functions,
`take_screenshot` and `save_screenshot_to_disk`
# Objective
fixes#8348
## Solution
- Uses multi-line string with backslashes allowing rustfmt to work
properly in the surrounding area.
---------
Co-authored-by: François <mockersf@gmail.com>
# Objective
Fix#8321
## Solution
The `old_viewport_size` that is used to detect whether the viewport has
changed was not being updated and thus always `None`.
# Objective
when a mesh uses zero for all bone weights, vertices end up in the
middle of the screen.
## Solution
we can address this by explicitly setting the first bone weight to 1
when the weights are given as zero. this is the approach taken by
[unity](https://forum.unity.com/threads/whats-the-problem-with-this-import-fbx-warning.133736/)
(although that also sets the bone index to zero) and
[three.js](94c1a4b86f/src/objects/SkinnedMesh.js (L98)),
and likely other engines.
## Alternatives
it does add a bit of overhead, and users can always fix this themselves,
though it's a bit awkward particularly with gltfs.
(note - this is for work so my sme status shouldn't apply)
---------
Co-authored-by: ira <JustTheCoolDude@gmail.com>
Fixes issue mentioned in PR #8285.
_Note: By mistake, this is currently dependent on #8285_
# Objective
Ensure consistency in the spelling of the documentation.
Exceptions:
`crates/bevy_mikktspace/src/generated.rs` - Has not been changed from
licence to license as it is part of a licensing agreement.
Maybe for further consistency,
https://github.com/bevyengine/bevy-website should also be given a look.
## Solution
### Changed the spelling of the current words (UK/CN/AU -> US) :
cancelled -> canceled (Breaking API changes in #8285)
behaviour -> behavior (Breaking API changes in #8285)
neighbour -> neighbor
grey -> gray
recognise -> recognize
centre -> center
metres -> meters
colour -> color
### ~~Update [`engine_style_guide.md`]~~ Moved to #8324
---
## Changelog
Changed UK spellings in documentation to US
## Migration Guide
Non-breaking changes*
\* If merged after #8285
# Objective
The clippy lint `type_complexity` is known not to play well with bevy.
It frequently triggers when writing complex queries, and taking the
lint's advice of using a type alias almost always just obfuscates the
code with no benefit. Because of this, this lint is currently ignored in
CI, but unfortunately it still shows up when viewing bevy code in an
IDE.
As someone who's made a fair amount of pull requests to this repo, I
will say that this issue has been a consistent thorn in my side. Since
bevy code is filled with spurious, ignorable warnings, it can be very
difficult to spot the *real* warnings that must be fixed -- most of the
time I just ignore all warnings, only to later find out that one of them
was real after I'm done when CI runs.
## Solution
Suppress this lint in all bevy crates. This was previously attempted in
#7050, but the review process ended up making it more complicated than
it needs to be and landed on a subpar solution.
The discussion in https://github.com/rust-lang/rust-clippy/pull/10571
explores some better long-term solutions to this problem. Since there is
no timeline on when these solutions may land, we should resolve this
issue in the meantime by locally suppressing these lints.
### Unresolved issues
Currently, these lints are not suppressed in our examples, since that
would require suppressing the lint in every single source file. They are
still ignored in CI.
# Objective
Make the coordinate systems of screen-space items (cursor position, UI,
viewports, etc.) consistent.
## Solution
Remove the weird double inversion of the cursor position's Y origin.
Once in bevy_winit to the bottom and then again in bevy_ui back to the
top.
This leaves the origin at the top left like it is in every other popular
app framework.
Update the `world_to_viewport`, `viewport_to_world`, and
`viewport_to_world_2d` methods to flip the Y origin (as they should
since the viewport coordinates were always relative to the top left).
## Migration Guide
`Window::cursor_position` now returns the position of the cursor
relative to the top left instead of the bottom left.
This now matches other screen-space coordinates like
`RelativeCursorPosition`, UI, and viewports.
The `world_to_viewport`, `viewport_to_world`, and `viewport_to_world_2d`
methods on `Camera` now return/take the viewport position relative to
the top left instead of the bottom left.
If you were using `world_to_viewport` to position a UI node the returned
`y` value should now be passed into the `top` field on `Style` instead
of the `bottom` field.
Note that this might shift the position of the UI node as it is now
anchored at the top.
If you were passing `Window::cursor_position` to `viewport_to_world` or
`viewport_to_world_2d` no change is necessary.
# Objective
- RenderGraphExt was merged, but only used in limited situations
## Solution
- Fix some remaining issues with the existing api
- Use the new api in the main pass and mass writeback
- Add CORE_2D and CORE_3D constant to make render_graph code shorter
# Objective
While working on #8299, I noticed that we're using a `capacity` field,
even though `wgpu::Buffer` exposes a `size` accessor that does the same
thing.
## Solution
Remove it from all buffer wrappers. Use `wgpu::Buffer::size` instead.
Default to 0 if no buffer has been allocated yet.
# Objective
Fixes#8284. `values` is being pushed to separately from the actual
scratch buffer in `DynamicUniformBuffer::push` and
`DynamicStorageBuffer::push`. In both types, `values` is really only
used to track the number of elements being added to the buffer, yet is
causing extra allocations, size increments and excess copies.
## Solution
Remove it and its remaining uses. Replace it with accesses to `scratch`
instead.
I removed the `len` accessor, as it may be non-trivial to compute just
from `scratch`. If this is still desirable to have, we can keep a `len`
member field to track it instead of relying on `scratch`.
# Objective
- Adding a node to the render_graph can be quite verbose and error prone
because there's a lot of moving parts to it.
## Solution
- Encapsulate this in a simple utility method
- Mostly intended for optional nodes that have specific ordering
- Requires that the `Node` impl `FromWorld`, but every internal node is
built using a new function taking a `&mut World` so it was essentially
already `FromWorld`
- Use it for the bloom, fxaa and taa, nodes.
- The main nodes don't use it because they rely more on the order of
many nodes being added
---
## Changelog
- Impl `FromWorld` for `BloomNode`, `FxaaNode` and `TaaNode`
- Added `RenderGraph::add_node_edges()`
- Added `RenderGraph::sub_graph()`
- Added `RenderGraph::sub_graph_mut()`
- Added `RenderGraphApp`, `RenderGraphApp::add_render_graph_node`,
`RenderGraphApp::add_render_graph_edges`,
`RenderGraphApp::add_render_graph_edge`
## Notes
~~This was taken out of https://github.com/bevyengine/bevy/pull/7995
because it works on it's own. Once the linked PR is done, the new
`add_node()` will be simplified a bit since the input/output params
won't be necessary.~~
This feature will be useful in most of the upcoming render nodes so it's
impact will be more relevant at that point.
Partially fixes#7985
## Future work
* Add a way to automatically label nodes or at least make it part of the
trait. This would remove one more field from the functions added in this
PR
* Use it in the main pass 2d/3d
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
The type `&World` is currently in an awkward place, since it has two
meanings:
1. Read-only access to the entire world.
2. Interior mutable access to the world; immutable and/or mutable access
to certain portions of world data.
This makes `&World` difficult to reason about, and surprising to see in
function signatures if one does not know about the interior mutable
property.
The type `UnsafeWorldCell` was added in #6404, which is meant to
alleviate this confusion by adding a dedicated type for interior mutable
world access. However, much of the engine still treats `&World` as an
interior mutable-ish type. One of those places is `SystemParam`.
## Solution
Modify `SystemParam::get_param` to accept `UnsafeWorldCell` instead of
`&World`. Simplify the safety invariants, since the `UnsafeWorldCell`
type encapsulates the concept of constrained world access.
---
## Changelog
`SystemParam::get_param` now accepts an `UnsafeWorldCell` instead of
`&World`. This type provides a high-level API for unsafe interior
mutable world access.
## Migration Guide
For manual implementers of `SystemParam`: the function `get_item` now
takes `UnsafeWorldCell` instead of `&World`. To access world data, use:
* `.get_entity()`, which returns an `UnsafeEntityCell` which can be used
to access component data.
* `get_resource()` and its variants, to access resource data.
# Objective
WebP is a modern image format developed by Google that offers a
significant reduction in file size compared to other image formats such
as PNG and JPEG, while still maintaining good image quality. This makes
it particularly useful for games with large numbers of images, such as
those with high-quality textures or detailed sprites, where file size
and loading times can have a significant impact on performance.
By adding support for WebP images in Bevy, game developers using this
engine can now take advantage of this modern image format and reduce the
memory usage and loading times of their games. This improvement can
ultimately result in a better gaming experience for players.
In summary, the objective of adding WebP image format support in Bevy is
to enable game developers to use a modern image format that provides
better compression rates and smaller file sizes, resulting in faster
loading times and reduced memory usage for their games.
## Solution
To add support for WebP images in Bevy, this pull request leverages the
existing `image` crate support for WebP. This implementation is easily
integrated into the existing Bevy asset-loading system. To maintain
compatibility with existing Bevy projects, WebP image support is
disabled by default, and developers can enable it by adding a feature
flag to their project's `Cargo.toml` file. With this feature, Bevy
becomes even more versatile for game developers and provides a valuable
addition to the game engine.
---
## Changelog
- Added support for WebP image format in Bevy game engine
## Migration Guide
To enable WebP image support in your Bevy project, add the following
line to your project's Cargo.toml file:
```toml
bevy = { version = "*", features = ["webp"]}
```
# Objective
- Implement an alternative antialias technique
- TAA scales based off of view resolution, not geometry complexity
- TAA filters textures, firefly pixels, and other aliasing not covered
by MSAA
- TAA additionally will reduce noise / increase quality in future
stochastic rendering techniques
- Closes https://github.com/bevyengine/bevy/issues/3663
## Solution
- Add a temporal jitter component
- Add a motion vector prepass
- Add a TemporalAntialias component and plugin
- Combine existing MSAA and FXAA examples and add TAA
## Followup Work
- Prepass motion vector support for skinned meshes
- Move uniforms needed for motion vectors into a separate bind group,
instead of using different bind group layouts
- Reuse previous frame's GPU view buffer for motion vectors, instead of
recomputing
- Mip biasing for sharper textures, and or unjitter texture UVs
https://github.com/bevyengine/bevy/issues/7323
- Compute shader for better performance
- Investigate FSR techniques
- Historical depth based disocclusion tests, for geometry disocclusion
- Historical luminance/hue based tests, for shading disocclusion
- Pixel "locks" to reduce blending rate / revamp history confidence
mechanism
- Orthographic camera support for TemporalJitter
- Figure out COD's 1-tap bicubic filter
---
## Changelog
- Added MotionVectorPrepass and TemporalJitter
- Added TemporalAntialiasPlugin, TemporalAntialiasBundle, and
TemporalAntialiasSettings
---------
Co-authored-by: IceSentry <c.giguere42@gmail.com>
Co-authored-by: IceSentry <IceSentry@users.noreply.github.com>
Co-authored-by: Robert Swain <robert.swain@gmail.com>
Co-authored-by: Daniel Chia <danstryder@gmail.com>
Co-authored-by: robtfm <50659922+robtfm@users.noreply.github.com>
Co-authored-by: Brandon Dyer <brandondyer64@gmail.com>
Co-authored-by: Edgar Geier <geieredgar@gmail.com>
# Objective
Documentation should no longer be using pre-stageless terminology to
avoid confusion.
## Solution
- update all docs referring to stages to instead refer to sets/schedules
where appropriate
- also mention `apply_system_buffers` for anything system-buffer-related
that previously referred to buffers being applied "at the end of a
stage"
A `RegularPolygon` is described by the circumscribed radius, not the
inscribed radius.
## Objective
- Correct documentation for `RegularPolygon`
## Solution
- Use the correct term
---------
Co-authored-by: Paul Hüber <phueber@kernsp.in>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Currently, the render graph slots are only used to pass the
view_entity around. This introduces significant boilerplate for very
little value. Instead of using slots for this, make the view_entity part
of the `RenderGraphContext`. This also means we won't need to have
`IN_VIEW` on every node and and we'll be able to use the default impl of
`Node::input()`.
## Solution
- Add `view_entity: Option<Entity>` to the `RenderGraphContext`
- Update all nodes to use this instead of entity slot input
---
## Changelog
- Add optional `view_entity` to `RenderGraphContext`
## Migration Guide
You can now get the view_entity directly from the `RenderGraphContext`.
When implementing the Node:
```rust
// 0.10
struct FooNode;
impl FooNode {
const IN_VIEW: &'static str = "view";
}
impl Node for FooNode {
fn input(&self) -> Vec<SlotInfo> {
vec![SlotInfo::new(Self::IN_VIEW, SlotType::Entity)]
}
fn run(
&self,
graph: &mut RenderGraphContext,
// ...
) -> Result<(), NodeRunError> {
let view_entity = graph.get_input_entity(Self::IN_VIEW)?;
// ...
Ok(())
}
}
// 0.11
struct FooNode;
impl Node for FooNode {
fn run(
&self,
graph: &mut RenderGraphContext,
// ...
) -> Result<(), NodeRunError> {
let view_entity = graph.view_entity();
// ...
Ok(())
}
}
```
When adding the node to the graph, you don't need to specify a slot_edge
for the view_entity.
```rust
// 0.10
let mut graph = RenderGraph::default();
graph.add_node(FooNode::NAME, node);
let input_node_id = draw_2d_graph.set_input(vec![SlotInfo::new(
graph::input::VIEW_ENTITY,
SlotType::Entity,
)]);
graph.add_slot_edge(
input_node_id,
graph::input::VIEW_ENTITY,
FooNode::NAME,
FooNode::IN_VIEW,
);
// add_node_edge ...
// 0.11
let mut graph = RenderGraph::default();
graph.add_node(FooNode::NAME, node);
// add_node_edge ...
```
## Notes
This PR paired with #8007 will help reduce a lot of annoying boilerplate
with the render nodes. Depending on which one gets merged first. It will
require a bit of clean up work to make both compatible.
I tagged this as a breaking change, because using the old system to get
the view_entity will break things because it's not a node input slot
anymore.
## Notes for reviewers
A lot of the diffs are just removing the slots in every nodes and graph
creation. The important part is mostly in the
graph_runner/CameraDriverNode.
# Objective
- @mockersf identified a performance regression of about 25% longer frame times introduced by #7784 in a complex scene with the Amazon Lumberyard bistro scene with both exterior and interior variants and a number of point lights with shadow mapping enabled
- The additional time seemed to be spent in the `ShadowPassNode`
- `ShadowPassNode` encodes the draw commands for the shadow phase. Roughly the same numbers of entities were having draw commands encoded, so something about the way they were being encoded had changed.
- One thing that definitely changed was that the pipeline used will be different depending on the alpha mode, and the scene has lots entities with opaque and blend materials. This suggested that maybe the pipeline was changing a lot so I tried a quick hack to see if it was the problem.
## Solution
- Sort the shadow phase items by their pipeline id
- This groups phase items by their pipeline id, which significantly reduces pipeline rebinding required to the point that the performance regression was gone.
# Objective
Fixes#7757
New function `Color::as_lcha` was added and `Color::as_lch_f32` changed name to `Color::as_lcha_f32`.
----
As a side note I did it as in every other Color function, that is I created very simillar code in `as_lcha` as was in `as_lcha_f32`. However it is totally possible to avoid this code duplication in LCHA and other color variants by doing something like :
```
pub fn as_lcha(self: &Color) -> Color {
let (lightness, chroma, hue, alpha) = self.as_lcha_f32();
return Color::Lcha { lightness, chroma, hue, alpha };
}
```
This is maybe slightly less efficient but it avoids copy-pasting this huge match expression which is error prone. Anyways since it is my first commit here I wanted to be consistent with the rest of code but can refactor all variants in separate PR if somebody thinks it is good idea.
# Objective
- Fixes#7889.
## Solution
- Change the glTF loader to insert a `Camera3dBundle` instead of a manually constructed bundle. This might prevent future issues when new components are required for a 3D Camera to work correctly.
- Register the `ColorGrading` type because `bevy_scene` was complaining about it.
# Objective
- Update `glam` to the latest version.
## Solution
- Update `glam` to version `0.23`.
Since the breaking change in `glam` only affects the `scalar-math` feature, this should cause no issues.
# Objective
Alternative to #7490. I wrote all of the code in this PR, but I have added @robtfm as co-author on commits that build on ideas from #7490. I would not have been able to solve these problems on my own without much more time investment and I'm largely just rephrasing the ideas from that PR.
Fixes#7435Fixes#7361Fixes#5721
## Solution
This implements the solution I [outlined here](https://github.com/bevyengine/bevy/pull/7490#issuecomment-1426580633).
* Adds "msaa writeback" as an explicit "msaa camera feature" and default to msaa_writeback: true for each camera. If this is true, a camera has MSAA enabled, and it isn't the first camera for the target, add a writeback before the main pass for that camera.
* Adds a CameraOutputMode, which can be used to configure if (and how) the results of a camera's rendering will be written to the final RenderTarget output texture (via the upscaling node). The `blend_state` and `color_attachment_load_op` are now configurable, giving much more control over how a camera will write to the output texture.
* Made cameras with the same target share the same main_texture tracker by using `Arc<AtomicUsize>`, which ensures continuity across cameras. This was previously broken / could produce weird results in some cases. `ViewTarget::main_texture()` is now correct in every context.
* Added a new generic / specializable BlitPipeline, which the new MsaaWritebackNode uses internally. The UpscalingPipelineNode now uses BlitPipeline instead of its own pipeline. We might ultimately need to fork this back out if we choose to add more configurability to the upscaling, but for now this will save on binary size by not embedding the same shader twice.
* Moved the "camera sorting" logic from the camera driver node to its own system. The results are now stored in the `SortedCameras` resource, which can be used anywhere in the renderer. MSAA writeback makes use of this.
---
## Changelog
- Added `Camera::msaa_writeback` which can enable and disable msaa writeback.
- Added specializable `BlitPipeline` and ported the upscaling node to use this.
- Added SortedCameras, exposing information that was previously internal to the camera driver node.
- Made cameras with the same target share the same main_texture tracker, which ensures continuity across cameras.
# Objective
Support the following syntax for adding systems:
```rust
App::new()
.add_system(setup.on_startup())
.add_systems((
show_menu.in_schedule(OnEnter(GameState::Paused)),
menu_ssytem.in_set(OnUpdate(GameState::Paused)),
hide_menu.in_schedule(OnExit(GameState::Paused)),
))
```
## Solution
Add the traits `IntoSystemAppConfig{s}`, which provide the extension methods necessary for configuring which schedule a system belongs to. These extension methods return `IntoSystemAppConfig{s}`, which `App::add_system{s}` uses to choose which schedule to add systems to.
---
## Changelog
+ Added the extension methods `in_schedule(label)` and `on_startup()` for configuring the schedule a system belongs to.
## Future Work
* Replace all uses of `add_startup_system` in the engine.
* Deprecate this method
# Objective
While working on #7784, I noticed that a `#define VAR` in a `.wgsl` file is always effective, even if it its scope is not accepting lines.
Example:
```c
#define A
#ifndef A
#define B
#endif
```
Currently, `B` will be defined although it shouldn't. This PR fixes that.
## Solution
Move the branch responsible for `#define` lines into the last else branch, which is only evaluated if the current scope is accepting lines.
# Objective
There was PR that introduced support for storage buffer is `AsBindGroup` macro [#6129](https://github.com/bevyengine/bevy/pull/6129), but it does not give more granular control over storage buffer, it will always copy all the data no matter which part of it was updated. There is also currently another open PR #6669 that tries to achieve exactly that, it is just not up to date and seems abandoned (Sorry if that is not right). In this PR I'm proposing a solution for both of these approaches to co-exist using `#[storage(n, buffer)]` and `#[storage(n)]` to distinguish between the cases.
We could also discuss in this PR if there is a need to extend this support to DynamicBuffers as well.
# Objective
- Nothing render
```
ERROR bevy_render::render_resource::pipeline_cache: failed to process shader: Invalid shader def definition for '_import_path': bevy_pbr
```
## Solution
- Fix define regex so that it must have one whitespace after `define`
# Objective
- Fixes#7494
- It is now possible to define a ShaderDef from inside a shader. This can be useful to centralise a value, or making sure an import is only interpreted once
## Solution
- Support `#define <SHADERDEF_NAME> <optional value>`
# Objective
- ambiguities bad
## Solution
- solve ambiguities
- by either ignoring (e.g. on `queue_mesh_view_bind_groups` since `LightMeta` access is different)
- by introducing a dependency (`prepare_windows -> prepare_*` because the latter use the fallback Msaa)
- make `prepare_assets` public so that we can do a proper `.after`
# Objective
- Fix the environment map shader not working under webgl due to textureNumLevels() not being supported
- Fixes https://github.com/bevyengine/bevy/issues/7722
## Solution
- Instead of using textureNumLevels(), put an extra field in the GpuLights uniform to store the mip count
# Objective
Splits tone mapping from https://github.com/bevyengine/bevy/pull/6677 into a separate PR.
Address https://github.com/bevyengine/bevy/issues/2264.
Adds tone mapping options:
- None: Bypasses tonemapping for instances where users want colors output to match those set.
- Reinhard
- Reinhard Luminance: Bevy's exiting tonemapping
- [ACES](https://github.com/TheRealMJP/BakingLab/blob/master/BakingLab/ACES.hlsl) (Fitted version, based on the same implementation that Godot 4 uses) see https://github.com/bevyengine/bevy/issues/2264
- [AgX](https://github.com/sobotka/AgX)
- SomewhatBoringDisplayTransform
- TonyMcMapface
- Blender Filmic
This PR also adds support for EXR images so they can be used to compare tonemapping options with reference images.
## Migration Guide
- Tonemapping is now an enum with NONE and the various tonemappers.
- The DebandDither is now a separate component.
Co-authored-by: JMS55 <47158642+JMS55@users.noreply.github.com>
# Objective
Closes#7573
- Make `StartupSet` a base set
## Solution
- Add `#[system_set(base)]` to the enum declaration
- Replace `.in_set(StartupSet::...)` with `.in_base_set(StartupSet::...)`
**Note**: I don't really know what I'm doing and what exactly the difference between base and non-base sets are. I mostly opened this PR based on discussion in Discord. I also don't really know how to test that I didn't break everything. Your reviews are appreciated!
---
## Changelog
- `StartupSet` is now a base set
## Migration Guide
`StartupSet` is now a base set. This means that you have to use `.in_base_set` instead of `.in_set`:
### Before
```rs
app.add_system(foo.in_set(StartupSet::PreStartup))
```
### After
```rs
app.add_system(foo.in_base_set(StartupSet::PreStartup))
```
# Objective
Allow for creating pipelines that use push constants. To be able to use push constants. Fixes#4825
As of right now, trying to call `RenderPass::set_push_constants` will trigger the following error:
```
thread 'main' panicked at 'wgpu error: Validation Error
Caused by:
In a RenderPass
note: encoder = `<CommandBuffer-(0, 59, Vulkan)>`
In a set_push_constant command
provided push constant is for stage(s) VERTEX | FRAGMENT | VERTEX_FRAGMENT, however the pipeline layout has no push constant range for the stage(s) VERTEX | FRAGMENT | VERTEX_FRAGMENT
```
## Solution
Add a field push_constant_ranges to` RenderPipelineDescriptor` and `ComputePipelineDescriptor`.
This PR supersedes #4908 which now contains merge conflicts due to significant changes to `bevy_render`.
Meanwhile, this PR also made the `layout` field of `RenderPipelineDescriptor` and `ComputePipelineDescriptor` non-optional. If the user do not need to specify the bind group layouts, they can simply supply an empty vector here. No need for it to be optional.
---
## Changelog
- Add a field push_constant_ranges to RenderPipelineDescriptor and ComputePipelineDescriptor
- Made the `layout` field of RenderPipelineDescriptor and ComputePipelineDescriptor non-optional.
## Migration Guide
- Add push_constant_ranges: Vec::new() to every `RenderPipelineDescriptor` and `ComputePipelineDescriptor`
- Unwrap the optional values on the `layout` field of `RenderPipelineDescriptor` and `ComputePipelineDescriptor`. If the descriptor has no layout, supply an empty vector.
Co-authored-by: Zhixing Zhang <me@neoto.xin>
# Objective
Fixes#7295
Should we maybe default to 4x if 2x/8x is selected but not supported?
---
## Changelog
- Added 2x and 8x sample counts for MSAA.
# Objective
- Environment maps use these formats, and in the future rendering LUTs will need textures loaded by default in the engine
## Solution
- Make ktx2 and zstd part of the default feature
- Let examples assume these features are enabled
---
## Changelog
- `ktx2` and `zstd` are now party of bevy's default enabled features
## Migration Guide
- If you used the `ktx2` or `zstd` features, you no longer need to explicitly enable them, as they are now part of bevy's default enabled features
# Objective
- Fixes#5432
- Fixes#6680
## Solution
- move code responsible for generating the `impl TypeUuid` from `type_uuid_derive` into a new function, `gen_impl_type_uuid`.
- this allows the new proc macro, `impl_type_uuid`, to call the code for generation.
- added struct `TypeUuidDef` and implemented `syn::Parse` to allow parsing of the input for the new macro.
- finally, used the new macro `impl_type_uuid` to implement `TypeUuid` for the standard library (in `crates/bevy_reflect/src/type_uuid_impl.rs`).
- fixes#6680 by doing a wrapping add of the param's index to its `TYPE_UUID`
Co-authored-by: dis-da-moe <84386186+dis-da-moe@users.noreply.github.com>
# Objective
We have a few old system labels that are now system sets but are still named or documented as labels. Documentation also generally mentioned system labels in some places.
## Solution
- Clean up naming and documentation regarding system sets
## Migration Guide
`PrepareAssetLabel` is now called `PrepareAssetSet`
# Objective
- Fixes: #7187
Since avoiding the `SRes::into_inner` call does not seem to be possible, this PR tries to at least document its usage.
I am not sure if I explained the lifetime issue correctly, please let me know if something is incorrect.
## Solution
- Add information about the `SRes::into_inner` usage on both `RenderCommand` and `Res`
Profiles show that in extremely hot loops, like the draw loops in the renderer, invoking the trace! macro has noticeable overhead, even if the trace log level is not enabled.
Solve this by introduce a 'wrapper' detailed_trace macro around trace, that wraps the trace! log statement in a trivially false if statement unless a cargo feature is enabled
# Objective
- Eliminate significant overhead observed with trace-level logging in render hot loops, even when trace log level is not enabled.
- This is an alternative solution to the one proposed in #7223
## Solution
- Introduce a wrapper around the `trace!` macro called `detailed_trace!`. This macro wraps the `trace!` macro with an if statement that is conditional on a new cargo feature, `detailed_trace`. When the feature is not enabled (the default), then the if statement is trivially false and should be optimized away at compile time.
- Convert the observed hot occurrences of trace logging in `TrackedRenderPass` with this new macro.
Testing the results of
```
cargo run --profile stress-test --features bevy/trace_tracy --example many_cubes -- spheres
```
shows significant improvement of the `main_opaque_pass_3d` of the renderer, a median time decrease from 6.0ms to 3.5ms.
---
## Changelog
- For performance reasons, some detailed renderer trace logs now require the use of cargo feature `detailed_trace` in addition to setting the log level to `TRACE` in order to be shown.
## Migration Guide
- Some detailed bevy trace events now require the use of the cargo feature `detailed_trace` in addition to enabling `TRACE` level logging to view. Should you wish to see these logs, please compile your code with the bevy feature `detailed_trace`. Currently, the only logs that are affected are the renderer logs pertaining to `TrackedRenderPass` functions
# Objective
There was issue #191 requesting subdivisions on the shape::Plane.
I also could have used this recently. I then write the solution.
Fixes #191
## Solution
I changed the shape::Plane to include subdivisions field and the code to create the subdivisions. I don't know how people are counting subdivisions so as I put in the doc comments 0 subdivisions results in the original geometry of the Plane.
Greater then 0 results in the number of lines dividing the plane.
I didn't know if it would be better to create a new struct that implemented this feature, say SubdivisionPlane or change Plane. I decided on changing Plane as that was what the original issue was.
It would be trivial to alter this to use another struct instead of altering Plane.
The issues of migration, although small, would be eliminated if a new struct was implemented.
## Changelog
### Added
Added subdivisions field to shape::Plane
## Migration Guide
All the examples needed to be updated to initalize the subdivisions field.
Also there were two tests in tests/window that need to be updated.
A user would have to update all their uses of shape::Plane to initalize the subdivisions field.
fixes#6799
# Objective
We should be able to reuse the `Globals` or `View` shader struct definitions from anywhere (including third party plugins) without needing to worry about defining unrelated shader defs.
Also we'd like to refactor these structs to not be repeatedly defined.
## Solution
Refactor both `Globals` and `View` into separate importable shaders.
Use the imports throughout.
Co-authored-by: Torstein Grindvik <52322338+torsteingrindvik@users.noreply.github.com>
# Objective
- This makes code a little more readable now.
## Solution
- Use `position` provided by `Iter` instead of `enumerating` indices and `map`ping to the index.
This was missed in #7205.
Should be fixed now. 😄
## Migration Guide
- `SpecializedComputePipelines::specialize` now takes a `&PipelineCache` instead of a `&mut PipelineCache`
(Before)
(After)
# Objective
- Improve lighting; especially reflections.
- Closes https://github.com/bevyengine/bevy/issues/4581.
## Solution
- Implement environment maps, providing better ambient light.
- Add microfacet multibounce approximation for specular highlights from Filament.
- Occlusion is no longer incorrectly applied to direct lighting. It now only applies to diffuse indirect light. Unsure if it's also supposed to apply to specular indirect light - the glTF specification just says "indirect light". In the case of ambient occlusion, for instance, that's usually only calculated as diffuse though. For now, I'm choosing to apply this just to indirect diffuse light, and not specular.
- Modified the PBR example to use an environment map, and have labels.
- Added `FallbackImageCubemap`.
## Implementation
- IBL technique references can be found in environment_map.wgsl.
- It's more accurate to use a LUT for the scale/bias. Filament has a good reference on generating this LUT. For now, I just used an analytic approximation.
- For now, environment maps must first be prefiltered outside of bevy using a 3rd party tool. See the `EnvironmentMap` documentation.
- Eventually, we should have our own prefiltering code, so that we can have dynamically changing environment maps, as well as let users drop in an HDR image and use asset preprocessing to create the needed textures using only bevy.
---
## Changelog
- Added an `EnvironmentMapLight` camera component that adds additional ambient light to a scene.
- StandardMaterials will now appear brighter and more saturated at high roughness, due to internal material changes. This is more physically correct.
- Fixed StandardMaterial occlusion being incorrectly applied to direct lighting.
- Added `FallbackImageCubemap`.
Co-authored-by: IceSentry <c.giguere42@gmail.com>
Co-authored-by: James Liu <contact@jamessliu.com>
Co-authored-by: Rob Parrett <robparrett@gmail.com>
# Objective
- Terminology used in field names and docs aren't accurate
- `window_origin` doesn't have any effect when `scaling_mode` is `ScalingMode::None`
- `left`, `right`, `bottom`, and `top` are set automatically unless `scaling_mode` is `None`. Fields that only sometimes give feedback are confusing.
- `ScalingMode::WindowSize` has no arguments, which is inconsistent with other `ScalingMode`s. 1 pixel = 1 world unit is also typically way too wide.
- `OrthographicProjection` feels generally less streamlined than its `PerspectiveProjection` counterpart
- Fixes#5818
- Fixes#6190
## Solution
- Improve consistency in `OrthographicProjection`'s public fields (they should either always give feedback or never give feedback).
- Improve consistency in `ScalingMode`'s arguments
- General usability improvements
- Improve accuracy of terminology:
- "Window" should refer to the physical window on the desktop
- "Viewport" should refer to the component in the window that images are drawn on (typically all of it)
- "View frustum" should refer to the volume captured by the projection
---
## Changelog
### Added
- Added argument to `ScalingMode::WindowSize` that specifies the number of pixels that equals one world unit.
- Added documentation for fields and enums
### Changed
- Renamed `window_origin` to `viewport_origin`, which now:
- Affects all `ScalingMode`s
- Takes a fraction of the viewport's width and height instead of an enum
- Removed `WindowOrigin` enum as it's obsolete
- Renamed `ScalingMode::None` to `ScalingMode::Fixed`, which now:
- Takes arguments to specify the projection size
- Replaced `left`, `right`, `bottom`, and `top` fields with a single `area: Rect`
- `scale` is now applied before updating `area`. Reading from it will take `scale` into account.
- Documentation changes to make terminology more accurate and consistent
## Migration Guide
- Change `window_origin` to `viewport_origin`; replace `WindowOrigin::Center` with `Vec2::new(0.5, 0.5)` and `WindowOrigin::BottomLeft` with `Vec2::new(0.0, 0.0)`
- For shadow projections and such, replace `left`, `right`, `bottom`, and `top` with `area: Rect::new(left, bottom, right, top)`
- For camera projections, remove l/r/b/t values from `OrthographicProjection` instantiations, as they no longer have any effect in any `ScalingMode`
- Change `ScalingMode::None` to `ScalingMode::Fixed`
- Replace manual changes of l/r/b/t with:
- Arguments in `ScalingMode::Fixed` to specify size
- `viewport_origin` to specify offset
- Change `ScalingMode::WindowSize` to `ScalingMode::WindowSize(1.0)`
# Objective
Fix#7377Fix#7513
## Solution
Record the changes made to the Bevy `Window` from `winit` as 'canon' to avoid Bevy sending those changes back to `winit` again, causing a feedback loop.
## Changelog
* Removed `ModifiesWindows` system label.
Neither `despawn_window` nor `changed_window` actually modify the `Window` component so all the `.after(ModifiesWindows)` shouldn't be necessary.
* Moved `changed_window` and `despawn_window` systems to `CoreStage::Last` to avoid systems making changes to the `Window` between `changed_window` and the end of the frame as they would be ignored.
## Migration Guide
The `ModifiesWindows` system label was removed.
Co-authored-by: devil-ira <justthecooldude@gmail.com>
# Objective
Some render systems that have system set used as a label so that they can be referenced from somewhere else.
The 1:1 translation from `add_system_to_stage(Prepare, prepare_lights.label(PrepareLights))` is `add_system(prepare_lights.in_set(Prepare).in_set(PrepareLights)`, but configuring the `PrepareLights` set to be in `Prepare` would match the intention better (there are no systems in `PrepareLights` outside of `Prepare`) and it is easier for visualization tools to deal with.
# Solution
- replace
```rust
prepare_lights in PrepareLights
prepare_lights in Prepare
```
with
```rs
prepare_lights in PrepareLights
PrepareLights in Prepare
```
**Before**
**After**
# Objective
Buffers in bevy do not allow for setting buffer usage flags which can be useful for setting COPY_SRC, MAP_READ, MAP_WRITE, which allows for buffers to be copied from gpu to cpu for inspection.
## Solution
Add buffer_usage field to buffers and a set_usage function to set them
# Objective
- Fixes#766
## Solution
- Add a new `Lcha` member to `bevy_render::color::Color` enum
---
## Changelog
- Add a new `Lcha` member to `bevy_render::color::Color` enum
- Add `bevy_render::color::LchRepresentation` struct
# Objective
[as noted](https://github.com/bevyengine/bevy/pull/5950#discussion_r1080762807) by james, transmuting arcs may be UB.
we now store a `*const ()` pointer internally, and only rely on `ptr.cast::<()>().cast::<T>() == ptr`.
as a happy side effect this removes the need for boxing the value, so todo: potentially use this for release mode as well
# Objective
NOTE: This depends on #7267 and should not be merged until #7267 is merged. If you are reviewing this before that is merged, I highly recommend viewing the Base Sets commit instead of trying to find my changes amongst those from #7267.
"Default sets" as described by the [Stageless RFC](https://github.com/bevyengine/rfcs/pull/45) have some [unfortunate consequences](https://github.com/bevyengine/bevy/discussions/7365).
## Solution
This adds "base sets" as a variant of `SystemSet`:
A set is a "base set" if `SystemSet::is_base` returns `true`. Typically this will be opted-in to using the `SystemSet` derive:
```rust
#[derive(SystemSet, Clone, Hash, Debug, PartialEq, Eq)]
#[system_set(base)]
enum MyBaseSet {
A,
B,
}
```
**Base sets are exclusive**: a system can belong to at most one "base set". Adding a system to more than one will result in an error. When possible we fail immediately during system-config-time with a nice file + line number. For the more nested graph-ey cases, this will fail at the final schedule build.
**Base sets cannot belong to other sets**: this is where the word "base" comes from
Systems and Sets can only be added to base sets using `in_base_set`. Calling `in_set` with a base set will fail. As will calling `in_base_set` with a normal set.
```rust
app.add_system(foo.in_base_set(MyBaseSet::A))
// X must be a normal set ... base sets cannot be added to base sets
.configure_set(X.in_base_set(MyBaseSet::A))
```
Base sets can still be configured like normal sets:
```rust
app.add_system(MyBaseSet::B.after(MyBaseSet::Ap))
```
The primary use case for base sets is enabling a "default base set":
```rust
schedule.set_default_base_set(CoreSet::Update)
// this will belong to CoreSet::Update by default
.add_system(foo)
// this will override the default base set with PostUpdate
.add_system(bar.in_base_set(CoreSet::PostUpdate))
```
This allows us to build apis that work by default in the standard Bevy style. This is a rough analog to the "default stage" model, but it use the new "stageless sets" model instead, with all of the ordering flexibility (including exclusive systems) that it provides.
---
## Changelog
- Added "base sets" and ported CoreSet to use them.
## Migration Guide
TODO
Huge thanks to @maniwani, @devil-ira, @hymm, @cart, @superdump and @jakobhellermann for the help with this PR.
# Objective
- Followup #6587.
- Minimal integration for the Stageless Scheduling RFC: https://github.com/bevyengine/rfcs/pull/45
## Solution
- [x] Remove old scheduling module
- [x] Migrate new methods to no longer use extension methods
- [x] Fix compiler errors
- [x] Fix benchmarks
- [x] Fix examples
- [x] Fix docs
- [x] Fix tests
## Changelog
### Added
- a large number of methods on `App` to work with schedules ergonomically
- the `CoreSchedule` enum
- `App::add_extract_system` via the `RenderingAppExtension` trait extension method
- the private `prepare_view_uniforms` system now has a public system set for scheduling purposes, called `ViewSet::PrepareUniforms`
### Removed
- stages, and all code that mentions stages
- states have been dramatically simplified, and no longer use a stack
- `RunCriteriaLabel`
- `AsSystemLabel` trait
- `on_hierarchy_reports_enabled` run criteria (now just uses an ad hoc resource checking run condition)
- systems in `RenderSet/Stage::Extract` no longer warn when they do not read data from the main world
- `RunCriteriaLabel`
- `transform_propagate_system_set`: this was a nonstandard pattern that didn't actually provide enough control. The systems are already `pub`: the docs have been updated to ensure that the third-party usage is clear.
### Changed
- `System::default_labels` is now `System::default_system_sets`.
- `App::add_default_labels` is now `App::add_default_sets`
- `CoreStage` and `StartupStage` enums are now `CoreSet` and `StartupSet`
- `App::add_system_set` was renamed to `App::add_systems`
- The `StartupSchedule` label is now defined as part of the `CoreSchedules` enum
- `.label(SystemLabel)` is now referred to as `.in_set(SystemSet)`
- `SystemLabel` trait was replaced by `SystemSet`
- `SystemTypeIdLabel<T>` was replaced by `SystemSetType<T>`
- The `ReportHierarchyIssue` resource now has a public constructor (`new`), and implements `PartialEq`
- Fixed time steps now use a schedule (`CoreSchedule::FixedTimeStep`) rather than a run criteria.
- Adding rendering extraction systems now panics rather than silently failing if no subapp with the `RenderApp` label is found.
- the `calculate_bounds` system, with the `CalculateBounds` label, is now in `CoreSet::Update`, rather than in `CoreSet::PostUpdate` before commands are applied.
- `SceneSpawnerSystem` now runs under `CoreSet::Update`, rather than `CoreStage::PreUpdate.at_end()`.
- `bevy_pbr::add_clusters` is no longer an exclusive system
- the top level `bevy_ecs::schedule` module was replaced with `bevy_ecs::scheduling`
- `tick_global_task_pools_on_main_thread` is no longer run as an exclusive system. Instead, it has been replaced by `tick_global_task_pools`, which uses a `NonSend` resource to force running on the main thread.
## Migration Guide
- Calls to `.label(MyLabel)` should be replaced with `.in_set(MySet)`
- Stages have been removed. Replace these with system sets, and then add command flushes using the `apply_system_buffers` exclusive system where needed.
- The `CoreStage`, `StartupStage, `RenderStage` and `AssetStage` enums have been replaced with `CoreSet`, `StartupSet, `RenderSet` and `AssetSet`. The same scheduling guarantees have been preserved.
- Systems are no longer added to `CoreSet::Update` by default. Add systems manually if this behavior is needed, although you should consider adding your game logic systems to `CoreSchedule::FixedTimestep` instead for more reliable framerate-independent behavior.
- Similarly, startup systems are no longer part of `StartupSet::Startup` by default. In most cases, this won't matter to you.
- For example, `add_system_to_stage(CoreStage::PostUpdate, my_system)` should be replaced with
- `add_system(my_system.in_set(CoreSet::PostUpdate)`
- When testing systems or otherwise running them in a headless fashion, simply construct and run a schedule using `Schedule::new()` and `World::run_schedule` rather than constructing stages
- Run criteria have been renamed to run conditions. These can now be combined with each other and with states.
- Looping run criteria and state stacks have been removed. Use an exclusive system that runs a schedule if you need this level of control over system control flow.
- For app-level control flow over which schedules get run when (such as for rollback networking), create your own schedule and insert it under the `CoreSchedule::Outer` label.
- Fixed timesteps are now evaluated in a schedule, rather than controlled via run criteria. The `run_fixed_timestep` system runs this schedule between `CoreSet::First` and `CoreSet::PreUpdate` by default.
- Command flush points introduced by `AssetStage` have been removed. If you were relying on these, add them back manually.
- Adding extract systems is now typically done directly on the main app. Make sure the `RenderingAppExtension` trait is in scope, then call `app.add_extract_system(my_system)`.
- the `calculate_bounds` system, with the `CalculateBounds` label, is now in `CoreSet::Update`, rather than in `CoreSet::PostUpdate` before commands are applied. You may need to order your movement systems to occur before this system in order to avoid system order ambiguities in culling behavior.
- the `RenderLabel` `AppLabel` was renamed to `RenderApp` for clarity
- `App::add_state` now takes 0 arguments: the starting state is set based on the `Default` impl.
- Instead of creating `SystemSet` containers for systems that run in stages, simply use `.on_enter::<State::Variant>()` or its `on_exit` or `on_update` siblings.
- `SystemLabel` derives should be replaced with `SystemSet`. You will also need to add the `Debug`, `PartialEq`, `Eq`, and `Hash` traits to satisfy the new trait bounds.
- `with_run_criteria` has been renamed to `run_if`. Run criteria have been renamed to run conditions for clarity, and should now simply return a bool.
- States have been dramatically simplified: there is no longer a "state stack". To queue a transition to the next state, call `NextState::set`
## TODO
- [x] remove dead methods on App and World
- [x] add `App::add_system_to_schedule` and `App::add_systems_to_schedule`
- [x] avoid adding the default system set at inappropriate times
- [x] remove any accidental cycles in the default plugins schedule
- [x] migrate benchmarks
- [x] expose explicit labels for the built-in command flush points
- [x] migrate engine code
- [x] remove all mentions of stages from the docs
- [x] verify docs for States
- [x] fix uses of exclusive systems that use .end / .at_start / .before_commands
- [x] migrate RenderStage and AssetStage
- [x] migrate examples
- [x] ensure that transform propagation is exported in a sufficiently public way (the systems are already pub)
- [x] ensure that on_enter schedules are run at least once before the main app
- [x] re-enable opt-in to execution order ambiguities
- [x] revert change to `update_bounds` to ensure it runs in `PostUpdate`
- [x] test all examples
- [x] unbreak directional lights
- [x] unbreak shadows (see 3d_scene, 3d_shape, lighting, transparaency_3d examples)
- [x] game menu example shows loading screen and menu simultaneously
- [x] display settings menu is a blank screen
- [x] `without_winit` example panics
- [x] ensure all tests pass
- [x] SubApp doc test fails
- [x] runs_spawn_local tasks fails
- [x] [Fix panic_when_hierachy_cycle test hanging](https://github.com/alice-i-cecile/bevy/pull/120)
## Points of Difficulty and Controversy
**Reviewers, please give feedback on these and look closely**
1. Default sets, from the RFC, have been removed. These added a tremendous amount of implicit complexity and result in hard to debug scheduling errors. They're going to be tackled in the form of "base sets" by @cart in a followup.
2. The outer schedule controls which schedule is run when `App::update` is called.
3. I implemented `Label for `Box<dyn Label>` for our label types. This enables us to store schedule labels in concrete form, and then later run them. I ran into the same set of problems when working with one-shot systems. We've previously investigated this pattern in depth, and it does not appear to lead to extra indirection with nested boxes.
4. `SubApp::update` simply runs the default schedule once. This sucks, but this whole API is incomplete and this was the minimal changeset.
5. `time_system` and `tick_global_task_pools_on_main_thread` no longer use exclusive systems to attempt to force scheduling order
6. Implemetnation strategy for fixed timesteps
7. `AssetStage` was migrated to `AssetSet` without reintroducing command flush points. These did not appear to be used, and it's nice to remove these bottlenecks.
8. Migration of `bevy_render/lib.rs` and pipelined rendering. The logic here is unusually tricky, as we have complex scheduling requirements.
## Future Work (ideally before 0.10)
- Rename schedule_v3 module to schedule or scheduling
- Add a derive macro to states, and likely a `EnumIter` trait of some form
- Figure out what exactly to do with the "systems added should basically work by default" problem
- Improve ergonomics for working with fixed timesteps and states
- Polish FixedTime API to match Time
- Rebase and merge #7415
- Resolve all internal ambiguities (blocked on better tools, especially #7442)
- Add "base sets" to replace the removed default sets.
# Objective
Avoid ‘Unable to find a GPU! Make sure you have installed required drivers!’ .
Because many devices only support OpenGL without Vulkan.
Fixes#3191
## Solution
Use all backends supported by wgpu.
# Objective
Currently, shaders may only have syntax such as
```wgsl
#ifdef FOO
// foo code
#else
#ifdef BAR
// bar code
#else
#ifdef BAZ
// baz code
#else
// fallback code
#endif
#endif
#endif
```
This is hard to read and follow.
Add a way to allow writing `#else ifdef DEFINE` to reduce the number of scopes introduced and to increase readability.
## Solution
Refactor the current preprocessing a bit and add logic to allow `#else ifdef DEFINE`.
This includes per-scope tracking of whether a branch has been accepted.
Add a few tests for this feature.
With these changes we may now write:
```wgsl
#ifdef FOO
// foo code
#else ifdef BAR
// bar code
#else ifdef BAZ
// baz code
#else
// fallback code
#endif
```
instead.
---
## Changelog
- Add `#else ifdef` to shader preprocessing.
# Objective
- Trying to move some of the fixes from https://github.com/bevyengine/bevy/pull/7267 to make that one easier to review
- The MainThreadExecutor is how the render world runs nonsend systems on the main thread for pipelined rendering.
- The multithread executor for stageless wasn't using the MainThreadExecutor.
- MainThreadExecutor was declared in the old executor_parallel module that is getting deleted.
- The way the MainThreadExecutor was getting passed to the scope was actually unsound as the resource could be dropped from the World while the schedule was running
## Solution
- Move MainThreadExecutor to the new multithreaded_executor's file.
- Make the multithreaded executor use the MainThreadExecutor
- Clone the MainThreadExecutor onto the stack and pass that ref in
## Changelog
- Move MainThreadExecutor for stageless migration.
# Objective
In simple cases we might want to derive the `ExtractComponent` trait.
This adds symmetry to the existing `ExtractResource` derive.
## Solution
Add an implementation of `#[derive(ExtractComponent)]`.
The implementation is adapted from the existing `ExtractResource` derive macro.
Additionally, there is an attribute called `extract_component_filter`. This allows specifying a query filter type used when extracting.
If not specified, no filter (equal to `()`) is used.
So:
```rust
#[derive(Component, Clone, ExtractComponent)]
#[extract_component_filter(With<Fuel>)]
pub struct Car {
pub wheels: usize,
}
```
would expand to (a bit cleaned up here):
```rust
impl ExtractComponent for Car
{
type Query = &'static Self;
type Filter = With<Fuel>;
type Out = Self;
fn extract_component(item: QueryItem<'_, Self::Query>) -> Option<Self::Out> {
Some(item.clone())
}
}
```
---
## Changelog
- Added the ability to `#[derive(ExtractComponent)]` with an optional filter.
# Objective
- Fixes#4592
## Solution
- Implement `SrgbColorSpace` for `u8` via `f32`
- Convert KTX2 R8 and R8G8 non-linear sRGB to wgpu `R8Unorm` and `Rg8Unorm` as non-linear sRGB are not supported by wgpu for these formats
- Convert KTX2 R8G8B8 formats to `Rgba8Unorm` and `Rgba8UnormSrgb` by adding an alpha channel as the Rgb variants don't exist in wgpu
---
## Changelog
- Added: Support for KTX2 `R8_SRGB`, `R8_UNORM`, `R8G8_SRGB`, `R8G8_UNORM`, `R8G8B8_SRGB`, `R8G8B8_UNORM` formats by converting to supported wgpu formats as appropriate
# Objective
Add a `FromReflect` derive to the `Aabb` type, like all other math types, so we can reflect `Vec<Aabb>`.
## Solution
Just add it :)
---
## Changelog
### Added
- Implemented `FromReflect` for `Aabb`.
# Objective
Update Bevy to wgpu 0.15.
## Changelog
- Update to wgpu 0.15, wgpu-hal 0.15.1, and naga 0.11
- Users can now use the [DirectX Shader Compiler](https://github.com/microsoft/DirectXShaderCompiler) (DXC) on Windows with DX12 for faster shader compilation and ShaderModel 6.0+ support (requires `dxcompiler.dll` and `dxil.dll`, which are included in DXC downloads from [here](https://github.com/microsoft/DirectXShaderCompiler/releases/latest))
## Migration Guide
### WGSL Top-Level `let` is now `const`
All top level constants are now declared with `const`, catching up with the wgsl spec.
`let` is no longer allowed at the global scope, only within functions.
```diff
-let SOME_CONSTANT = 12.0;
+const SOME_CONSTANT = 12.0;
```
#### `TextureDescriptor` and `SurfaceConfiguration` now requires a `view_formats` field
The new `view_formats` field in the `TextureDescriptor` is used to specify a list of formats the texture can be re-interpreted to in a texture view. Currently only changing srgb-ness is allowed (ex. `Rgba8Unorm` <=> `Rgba8UnormSrgb`). You should set `view_formats` to `&[]` (empty) unless you have a specific reason not to.
#### The DirectX Shader Compiler (DXC) is now supported on DX12
DXC is now the default shader compiler when using the DX12 backend. DXC is Microsoft's replacement for their legacy FXC compiler, and is faster, less buggy, and allows for modern shader features to be used (ShaderModel 6.0+). DXC requires `dxcompiler.dll` and `dxil.dll` to be available, otherwise it will log a warning and fall back to FXC.
You can get `dxcompiler.dll` and `dxil.dll` by downloading the latest release from [Microsoft's DirectXShaderCompiler github repo](https://github.com/microsoft/DirectXShaderCompiler/releases/latest) and copying them into your project's root directory. These must be included when you distribute your Bevy game/app/etc if you plan on supporting the DX12 backend and are using DXC.
`WgpuSettings` now has a `dx12_shader_compiler` field which can be used to choose between either FXC or DXC (if you pass None for the paths for DXC, it will check for the .dlls in the working directory).
# Objective
## Use Case
A render node which calls `post_process_write()` on a `ViewTarget` multiple times during a single run of the node means both main textures of this view target is accessed.
If the source texture (which alternate between main textures **a** and **b**) is accessed in a shader during those iterations it means that those textures have to be bound using bind groups.
Preparing bind groups for both main textures ahead of time is desired, which means having access to the _other_ main texture is needed.
## Solution
Add a method on `ViewTarget` for accessing the other main texture.
---
## Changelog
### Added
- `main_texture_other` API on `ViewTarget`
# Objective
I found several words in code and docs are incorrect. This should be fixed.
## Solution
- Fix several minor typos
Co-authored-by: Chris Ohk <utilforever@gmail.com>
# Objective
Fixes#6952
## Solution
- Request WGPU capabilities `SAMPLED_TEXTURE_AND_STORAGE_BUFFER_ARRAY_NON_UNIFORM_INDEXING`, `SAMPLER_NON_UNIFORM_INDEXING` and `UNIFORM_BUFFER_AND_STORAGE_TEXTURE_ARRAY_NON_UNIFORM_INDEXING` when corresponding features are enabled.
- Add an example (`shaders/texture_binding_array`) illustrating (and testing) the use of non-uniform indexed textures and samplers.
## Changelog
- Added new capabilities for shader validation.
- Added example `shaders/texture_binding_array`.
Co-authored-by: Robert Swain <robert.swain@gmail.com>
# Objective
Implements cascaded shadow maps for directional lights, which produces better quality shadows without needing excessively large shadow maps.
Fixes#3629
Before
After
## Solution
Rather than rendering a single shadow map for directional light, the view frustum is divided into a series of cascades, each of which gets its own shadow map. The correct cascade is then sampled for shadow determination.
---
## Changelog
Directional lights now use cascaded shadow maps for improved shadow quality.
## Migration Guide
You no longer have to manually specify a `shadow_projection` for a directional light, and these settings should be removed. If customization of how cascaded shadow maps work is desired, modify the `CascadeShadowConfig` component instead.
# Objective
Fixes#7286. Both `App::add_sub_app` and `App::insert_sub_app` are rather redundant. Before 0.10 is shipped, one of them should be removed.
## Solution
Remove `App::add_sub_app` to prefer `App::insert_sub_app`.
Also hid away `SubApp::extract` since that can be a footgun if someone mutates it for whatever reason. Willing to revert this change if there are objections.
Perhaps we should make `SubApp: Deref<Target=App>`? Might change if we decide to move `!Send` resources into it.
---
## Changelog
Added: `SubApp::new`
Removed: `App::add_sub_app`
## Migration Guide
`App::add_sub_app` has been removed in favor of `App::insert_sub_app`. Use `SubApp::new` and insert it via `App::add_sub_app`
Old:
```rust
let mut sub_app = App::new()
// Build subapp here
app.add_sub_app(MySubAppLabel, sub_app);
```
New:
```rust
let mut sub_app = App::new()
// Build subapp here
app.insert_sub_app(MySubAppLabel, SubApp::new(sub_app, extract_fn));
```
# Objective
`RenderContext`, the core abstraction for running the render graph, currently only supports recording one `CommandBuffer` across the entire render graph. This means the entire buffer must be recorded sequentially, usually via the render graph itself. This prevents parallelization and forces users to only encode their commands in the render graph.
## Solution
Allow `RenderContext` to store a `Vec<CommandBuffer>` that it progressively appends to. By default, the context will not have a command encoder, but will create one as soon as either `begin_tracked_render_pass` or the `command_encoder` accesor is first called. `RenderContext::add_command_buffer` allows users to interrupt the current command encoder, flush it to the vec, append a user-provided `CommandBuffer` and reset the command encoder to start a new buffer. Users or the render graph will call `RenderContext::finish` to retrieve the series of buffers for submitting to the queue.
This allows users to encode their own `CommandBuffer`s outside of the render graph, potentially in different threads, and store them in components or resources.
Ideally, in the future, the core pipeline passes can run in `RenderStage::Render` systems and end up saving the completed command buffers to either `Commands` or a field in `RenderPhase`.
## Alternatives
The alternative is to use to use wgpu's `RenderBundle`s, which can achieve similar results; however it's not universally available (no OpenGL, WebGL, and DX11).
---
## Changelog
Added: `RenderContext::new`
Added: `RenderContext::add_command_buffer`
Added: `RenderContext::finish`
Changed: `RenderContext::render_device` is now private. Use the accessor `RenderContext::render_device()` instead.
Changed: `RenderContext::command_encoder` is now private. Use the accessor `RenderContext::command_encoder()` instead.
Changed: `RenderContext` now supports adding external `CommandBuffer`s for inclusion into the render graphs. These buffers can be encoded outside of the render graph (i.e. in a system).
## Migration Guide
`RenderContext`'s fields are now private. Use the accessors on `RenderContext` instead, and construct it with `RenderContext::new`.
# Objective
Fixes#6931
Continues #6954 by squashing `Msaa` to a flat enum
Helps out #7215
# Solution
```
pub enum Msaa {
Off = 1,
#[default]
Sample4 = 4,
}
```
# Changelog
- Modified
- `Msaa` is now enum
- Defaults to 4 samples
- Uses `.samples()` method to get the sample number as `u32`
# Migration Guide
```
let multi = Msaa { samples: 4 }
// is now
let multi = Msaa::Sample4
multi.samples
// is now
multi.samples()
```
Co-authored-by: Sjael <jakeobrien44@gmail.com>
After #6503, bevy_render uses the `send_blocking` method introduced in async-channel 1.7, but depended only on ^1.4.
I saw this after pulling main without running cargo update.
# Objective
- Fix minimum dependency version of async-channel
## Solution
- Bump async-channel version constraint to ^1.8, which is currently the latest version.
NOTE: Both bevy_ecs and bevy_tasks also depend on async-channel but they didn't use any newer features.
# Objective
Fixes#3184. Fixes#6640. Fixes#4798. Using `Query::par_for_each(_mut)` currently requires a `batch_size` parameter, which affects how it chunks up large archetypes and tables into smaller chunks to run in parallel. Tuning this value is difficult, as the performance characteristics entirely depends on the state of the `World` it's being run on. Typically, users will just use a flat constant and just tune it by hand until it performs well in some benchmarks. However, this is both error prone and risks overfitting the tuning on that benchmark.
This PR proposes a naive automatic batch-size computation based on the current state of the `World`.
## Background
`Query::par_for_each(_mut)` schedules a new Task for every archetype or table that it matches. Archetypes/tables larger than the batch size are chunked into smaller tasks. Assuming every entity matched by the query has an identical workload, this makes the worst case scenario involve using a batch size equal to the size of the largest matched archetype or table. Conversely, a batch size of `max {archetype, table} size / thread count * COUNT_PER_THREAD` is likely the sweetspot where the overhead of scheduling tasks is minimized, at least not without grouping small archetypes/tables together.
There is also likely a strict minimum batch size below which the overhead of scheduling these tasks is heavier than running the entire thing single-threaded.
## Solution
- [x] Remove the `batch_size` from `Query(State)::par_for_each` and friends.
- [x] Add a check to compute `batch_size = max {archeytpe/table} size / thread count * COUNT_PER_THREAD`
- [x] ~~Panic if thread count is 0.~~ Defer to `for_each` if the thread count is 1 or less.
- [x] Early return if there is no matched table/archetype.
- [x] Add override option for users have queries that strongly violate the initial assumption that all iterated entities have an equal workload.
---
## Changelog
Changed: `Query::par_for_each(_mut)` has been changed to `Query::par_iter(_mut)` and will now automatically try to produce a batch size for callers based on the current `World` state.
## Migration Guide
The `batch_size` parameter for `Query(State)::par_for_each(_mut)` has been removed. These calls will automatically compute a batch size for you. Remove these parameters from all calls to these functions.
Before:
```rust
fn parallel_system(query: Query<&MyComponent>) {
query.par_for_each(32, |comp| {
...
});
}
```
After:
```rust
fn parallel_system(query: Query<&MyComponent>) {
query.par_iter().for_each(|comp| {
...
});
}
```
Co-authored-by: Arnav Choubey <56453634+x-52@users.noreply.github.com>
Co-authored-by: Robert Swain <robert.swain@gmail.com>
Co-authored-by: François <mockersf@gmail.com>
Co-authored-by: Corey Farwell <coreyf@rwell.org>
Co-authored-by: Aevyrie <aevyrie@gmail.com>
# Objective
- Implement pipelined rendering
- Fixes#5082
- Fixes#4718
## User Facing Description
Bevy now implements piplelined rendering! Pipelined rendering allows the app logic and rendering logic to run on different threads leading to large gains in performance.
*tracy capture of many_foxes example*
To use pipelined rendering, you just need to add the `PipelinedRenderingPlugin`. If you're using `DefaultPlugins` then it will automatically be added for you on all platforms except wasm. Bevy does not currently support multithreading on wasm which is needed for this feature to work. If you aren't using `DefaultPlugins` you can add the plugin manually.
```rust
use bevy::prelude::*;
use bevy::render::pipelined_rendering::PipelinedRenderingPlugin;
fn main() {
App::new()
// whatever other plugins you need
.add_plugin(RenderPlugin)
// needs to be added after RenderPlugin
.add_plugin(PipelinedRenderingPlugin)
.run();
}
```
If for some reason pipelined rendering needs to be removed. You can also disable the plugin the normal way.
```rust
use bevy::prelude::*;
use bevy::render::pipelined_rendering::PipelinedRenderingPlugin;
fn main() {
App::new.add_plugins(DefaultPlugins.build().disable::<PipelinedRenderingPlugin>());
}
```
### A setup function was added to plugins
A optional plugin lifecycle function was added to the `Plugin trait`. This function is called after all plugins have been built, but before the app runner is called. This allows for some final setup to be done. In the case of pipelined rendering, the function removes the sub app from the main app and sends it to the render thread.
```rust
struct MyPlugin;
impl Plugin for MyPlugin {
fn build(&self, app: &mut App) {
}
// optional function
fn setup(&self, app: &mut App) {
// do some final setup before runner is called
}
}
```
### A Stage for Frame Pacing
In the `RenderExtractApp` there is a stage labelled `BeforeIoAfterRenderStart` that systems can be added to. The specific use case for this stage is for a frame pacing system that can delay the start of main app processing in render bound apps to reduce input latency i.e. "frame pacing". This is not currently built into bevy, but exists as `bevy`
```text
|-------------------------------------------------------------------|
| | BeforeIoAfterRenderStart | winit events | main schedule |
| extract |---------------------------------------------------------|
| | extract commands | rendering schedule |
|-------------------------------------------------------------------|
```
### Small API additions
* `Schedule::remove_stage`
* `App::insert_sub_app`
* `App::remove_sub_app`
* `TaskPool::scope_with_executor`
## Problems and Solutions
### Moving render app to another thread
Most of the hard bits for this were done with the render redo. This PR just sends the render app back and forth through channels which seems to work ok. I originally experimented with using a scope to run the render task. It was cuter, but that approach didn't allow render to start before i/o processing. So I switched to using channels. There is much complexity in the coordination that needs to be done, but it's worth it. By moving rendering during i/o processing the frame times should be much more consistent in render bound apps. See https://github.com/bevyengine/bevy/issues/4691.
### Unsoundness with Sending World with NonSend resources
Dropping !Send things on threads other than the thread they were spawned on is considered unsound. The render world doesn't have any nonsend resources. So if we tell the users to "pretty please don't spawn nonsend resource on the render world", we can avoid this problem.
More seriously there is this https://github.com/bevyengine/bevy/pull/6534 pr, which patches the unsoundness by aborting the app if a nonsend resource is dropped on the wrong thread. ~~That PR should probably be merged before this one.~~ For a longer term solution we have this discussion going https://github.com/bevyengine/bevy/discussions/6552.
### NonSend Systems in render world
The render world doesn't have any !Send resources, but it does have a non send system. While Window is Send, winit does have some API's that can only be accessed on the main thread. `prepare_windows` in the render schedule thus needs to be scheduled on the main thread. Currently we run nonsend systems by running them on the thread the TaskPool::scope runs on. When we move render to another thread this no longer works.
To fix this, a new `scope_with_executor` method was added that takes a optional `TheadExecutor` that can only be ticked on the thread it was initialized on. The render world then holds a `MainThreadExecutor` resource which can be passed to the scope in the parallel executor that it uses to spawn it's non send systems on.
### Scopes executors between render and main should not share tasks
Since the render world and the app world share the `ComputeTaskPool`. Because `scope` has executors for the ComputeTaskPool a system from the main world could run on the render thread or a render system could run on the main thread. This can cause performance problems because it can delay a stage from finishing. See https://github.com/bevyengine/bevy/pull/6503#issuecomment-1309791442 for more details.
To avoid this problem, `TaskPool::scope` has been changed to not tick the ComputeTaskPool when it's used by the parallel executor. In the future when we move closer to the 1 thread to 1 logical core model we may want to overprovide threads, because the render and main app threads don't do much when executing the schedule.
## Performance
My machine is Windows 11, AMD Ryzen 5600x, RX 6600
### Examples
#### This PR with pipelining vs Main
> Note that these were run on an older version of main and the performance profile has probably changed due to optimizations
Seeing a perf gain from 29% on many lights to 7% on many sprites.
<html>
<body>
<!--StartFragment--><google-sheets-html-origin>
| percent | | | Diff | | | Main | | | PR | |
-- | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- | --
tracy frame time | mean | median | sigma | mean | median | sigma | mean | median | sigma | mean | median | sigma
many foxes | 27.01% | 27.34% | -47.09% | 1.58 | 1.55 | -1.78 | 5.85 | 5.67 | 3.78 | 4.27 | 4.12 | 5.56
many lights | 29.35% | 29.94% | -10.84% | 3.02 | 3.03 | -0.57 | 10.29 | 10.12 | 5.26 | 7.27 | 7.09 | 5.83
many animated sprites | 13.97% | 15.69% | 14.20% | 3.79 | 4.17 | 1.41 | 27.12 | 26.57 | 9.93 | 23.33 | 22.4 | 8.52
3d scene | 25.79% | 26.78% | 7.46% | 0.49 | 0.49 | 0.15 | 1.9 | 1.83 | 2.01 | 1.41 | 1.34 | 1.86
many cubes | 11.97% | 11.28% | 14.51% | 1.93 | 1.78 | 1.31 | 16.13 | 15.78 | 9.03 | 14.2 | 14 | 7.72
many sprites | 7.14% | 9.42% | -85.42% | 1.72 | 2.23 | -6.15 | 24.09 | 23.68 | 7.2 | 22.37 | 21.45 | 13.35
<!--EndFragment-->
</body>
</html>
#### This PR with pipelining disabled vs Main
Mostly regressions here. I don't think this should be a problem as users that are disabling pipelined rendering are probably running single threaded and not using the parallel executor. The regression is probably mostly due to the switch to use `async_executor::run` instead of `try_tick` and also having one less thread to run systems on. I'll do a writeup on why switching to `run` causes regressions, so we can try to eventually fix it. Using try_tick causes issues when pipeline rendering is enable as seen [here](https://github.com/bevyengine/bevy/pull/6503#issuecomment-1380803518)
<html>
<body>
<!--StartFragment--><google-sheets-html-origin>
| percent | | | Diff | | | Main | | | PR no pipelining | |
-- | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- | --
tracy frame time | mean | median | sigma | mean | median | sigma | mean | median | sigma | mean | median | sigma
many foxes | -3.72% | -4.42% | -1.07% | -0.21 | -0.24 | -0.04 | 5.64 | 5.43 | 3.74 | 5.85 | 5.67 | 3.78
many lights | 0.29% | -0.30% | 4.75% | 0.03 | -0.03 | 0.25 | 10.29 | 10.12 | 5.26 | 10.26 | 10.15 | 5.01
many animated sprites | 0.22% | 1.81% | -2.72% | 0.06 | 0.48 | -0.27 | 27.12 | 26.57 | 9.93 | 27.06 | 26.09 | 10.2
3d scene | -15.79% | -14.75% | -31.34% | -0.3 | -0.27 | -0.63 | 1.9 | 1.83 | 2.01 | 2.2 | 2.1 | 2.64
many cubes | -2.85% | -3.30% | 0.00% | -0.46 | -0.52 | 0 | 16.13 | 15.78 | 9.03 | 16.59 | 16.3 | 9.03
many sprites | 2.49% | 2.41% | 0.69% | 0.6 | 0.57 | 0.05 | 24.09 | 23.68 | 7.2 | 23.49 | 23.11 | 7.15
<!--EndFragment-->
</body>
</html>
### Benchmarks
Mostly the same except empty_systems has got a touch slower. The maybe_pipelining+1 column has the compute task pool with an extra thread over default added. This is because pipelining loses one thread over main to execute systems on, since the main thread no longer runs normal systems.
<details>
<summary>Click Me</summary>
```text
group main maybe-pipelining+1
----- ------------------------- ------------------
busy_systems/01x_entities_03_systems 1.07 30.7±1.32µs ? ?/sec 1.00 28.6±1.35µs ? ?/sec
busy_systems/01x_entities_06_systems 1.10 52.1±1.10µs ? ?/sec 1.00 47.2±1.08µs ? ?/sec
busy_systems/01x_entities_09_systems 1.00 74.6±1.36µs ? ?/sec 1.00 75.0±1.93µs ? ?/sec
busy_systems/01x_entities_12_systems 1.03 100.6±6.68µs ? ?/sec 1.00 98.0±1.46µs ? ?/sec
busy_systems/01x_entities_15_systems 1.11 128.5±3.53µs ? ?/sec 1.00 115.5±1.02µs ? ?/sec
busy_systems/02x_entities_03_systems 1.16 50.4±2.56µs ? ?/sec 1.00 43.5±3.00µs ? ?/sec
busy_systems/02x_entities_06_systems 1.00 87.1±1.27µs ? ?/sec 1.05 91.5±7.15µs ? ?/sec
busy_systems/02x_entities_09_systems 1.04 139.9±6.37µs ? ?/sec 1.00 134.0±1.06µs ? ?/sec
busy_systems/02x_entities_12_systems 1.05 179.2±3.47µs ? ?/sec 1.00 170.1±3.17µs ? ?/sec
busy_systems/02x_entities_15_systems 1.01 219.6±3.75µs ? ?/sec 1.00 218.1±2.55µs ? ?/sec
busy_systems/03x_entities_03_systems 1.10 70.6±2.33µs ? ?/sec 1.00 64.3±0.69µs ? ?/sec
busy_systems/03x_entities_06_systems 1.02 130.2±3.11µs ? ?/sec 1.00 128.0±1.34µs ? ?/sec
busy_systems/03x_entities_09_systems 1.00 195.0±10.11µs ? ?/sec 1.00 194.8±1.41µs ? ?/sec
busy_systems/03x_entities_12_systems 1.01 261.7±4.05µs ? ?/sec 1.00 259.8±4.11µs ? ?/sec
busy_systems/03x_entities_15_systems 1.00 318.0±3.04µs ? ?/sec 1.06 338.3±20.25µs ? ?/sec
busy_systems/04x_entities_03_systems 1.00 82.9±0.63µs ? ?/sec 1.02 84.3±0.63µs ? ?/sec
busy_systems/04x_entities_06_systems 1.01 181.7±3.65µs ? ?/sec 1.00 179.8±1.76µs ? ?/sec
busy_systems/04x_entities_09_systems 1.04 265.0±4.68µs ? ?/sec 1.00 255.3±1.98µs ? ?/sec
busy_systems/04x_entities_12_systems 1.00 335.9±3.00µs ? ?/sec 1.05 352.6±15.84µs ? ?/sec
busy_systems/04x_entities_15_systems 1.00 418.6±10.26µs ? ?/sec 1.08 450.2±39.58µs ? ?/sec
busy_systems/05x_entities_03_systems 1.07 114.3±0.95µs ? ?/sec 1.00 106.9±1.52µs ? ?/sec
busy_systems/05x_entities_06_systems 1.08 229.8±2.90µs ? ?/sec 1.00 212.3±4.18µs ? ?/sec
busy_systems/05x_entities_09_systems 1.03 329.3±1.99µs ? ?/sec 1.00 319.2±2.43µs ? ?/sec
busy_systems/05x_entities_12_systems 1.06 454.7±6.77µs ? ?/sec 1.00 430.1±3.58µs ? ?/sec
busy_systems/05x_entities_15_systems 1.03 554.6±6.15µs ? ?/sec 1.00 538.4±23.87µs ? ?/sec
contrived/01x_entities_03_systems 1.00 14.0±0.15µs ? ?/sec 1.08 15.1±0.21µs ? ?/sec
contrived/01x_entities_06_systems 1.04 28.5±0.37µs ? ?/sec 1.00 27.4±0.44µs ? ?/sec
contrived/01x_entities_09_systems 1.00 41.5±4.38µs ? ?/sec 1.02 42.2±2.24µs ? ?/sec
contrived/01x_entities_12_systems 1.06 55.9±1.49µs ? ?/sec 1.00 52.6±1.36µs ? ?/sec
contrived/01x_entities_15_systems 1.02 68.0±2.00µs ? ?/sec 1.00 66.5±0.78µs ? ?/sec
contrived/02x_entities_03_systems 1.03 25.2±0.38µs ? ?/sec 1.00 24.6±0.52µs ? ?/sec
contrived/02x_entities_06_systems 1.00 46.3±0.49µs ? ?/sec 1.04 48.1±4.13µs ? ?/sec
contrived/02x_entities_09_systems 1.02 70.4±0.99µs ? ?/sec 1.00 68.8±1.04µs ? ?/sec
contrived/02x_entities_12_systems 1.06 96.8±1.49µs ? ?/sec 1.00 91.5±0.93µs ? ?/sec
contrived/02x_entities_15_systems 1.02 116.2±0.95µs ? ?/sec 1.00 114.2±1.42µs ? ?/sec
contrived/03x_entities_03_systems 1.00 33.2±0.38µs ? ?/sec 1.01 33.6±0.45µs ? ?/sec
contrived/03x_entities_06_systems 1.00 62.4±0.73µs ? ?/sec 1.01 63.3±1.05µs ? ?/sec
contrived/03x_entities_09_systems 1.02 96.4±0.85µs ? ?/sec 1.00 94.8±3.02µs ? ?/sec
contrived/03x_entities_12_systems 1.01 126.3±4.67µs ? ?/sec 1.00 125.6±2.27µs ? ?/sec
contrived/03x_entities_15_systems 1.03 160.2±9.37µs ? ?/sec 1.00 156.0±1.53µs ? ?/sec
contrived/04x_entities_03_systems 1.02 41.4±3.39µs ? ?/sec 1.00 40.5±0.52µs ? ?/sec
contrived/04x_entities_06_systems 1.00 78.9±1.61µs ? ?/sec 1.02 80.3±1.06µs ? ?/sec
contrived/04x_entities_09_systems 1.02 121.8±3.97µs ? ?/sec 1.00 119.2±1.46µs ? ?/sec
contrived/04x_entities_12_systems 1.00 157.8±1.48µs ? ?/sec 1.01 160.1±1.72µs ? ?/sec
contrived/04x_entities_15_systems 1.00 197.9±1.47µs ? ?/sec 1.08 214.2±34.61µs ? ?/sec
contrived/05x_entities_03_systems 1.00 49.1±0.33µs ? ?/sec 1.01 49.7±0.75µs ? ?/sec
contrived/05x_entities_06_systems 1.00 95.0±0.93µs ? ?/sec 1.00 94.6±0.94µs ? ?/sec
contrived/05x_entities_09_systems 1.01 143.2±1.68µs ? ?/sec 1.00 142.2±2.00µs ? ?/sec
contrived/05x_entities_12_systems 1.00 191.8±2.03µs ? ?/sec 1.01 192.7±7.88µs ? ?/sec
contrived/05x_entities_15_systems 1.02 239.7±3.71µs ? ?/sec 1.00 235.8±4.11µs ? ?/sec
empty_systems/000_systems 1.01 47.8±0.67ns ? ?/sec 1.00 47.5±2.02ns ? ?/sec
empty_systems/001_systems 1.00 1743.2±126.14ns ? ?/sec 1.01 1761.1±70.10ns ? ?/sec
empty_systems/002_systems 1.01 2.2±0.04µs ? ?/sec 1.00 2.2±0.02µs ? ?/sec
empty_systems/003_systems 1.02 2.7±0.09µs ? ?/sec 1.00 2.7±0.16µs ? ?/sec
empty_systems/004_systems 1.00 3.1±0.11µs ? ?/sec 1.00 3.1±0.24µs ? ?/sec
empty_systems/005_systems 1.00 3.5±0.05µs ? ?/sec 1.11 3.9±0.70µs ? ?/sec
empty_systems/010_systems 1.00 5.5±0.12µs ? ?/sec 1.03 5.7±0.17µs ? ?/sec
empty_systems/015_systems 1.00 7.9±0.19µs ? ?/sec 1.06 8.4±0.16µs ? ?/sec
empty_systems/020_systems 1.00 10.4±1.25µs ? ?/sec 1.02 10.6±0.18µs ? ?/sec
empty_systems/025_systems 1.00 12.4±0.39µs ? ?/sec 1.14 14.1±1.07µs ? ?/sec
empty_systems/030_systems 1.00 15.1±0.39µs ? ?/sec 1.05 15.8±0.62µs ? ?/sec
empty_systems/035_systems 1.00 16.9±0.47µs ? ?/sec 1.07 18.0±0.37µs ? ?/sec
empty_systems/040_systems 1.00 19.3±0.41µs ? ?/sec 1.05 20.3±0.39µs ? ?/sec
empty_systems/045_systems 1.00 22.4±1.67µs ? ?/sec 1.02 22.9±0.51µs ? ?/sec
empty_systems/050_systems 1.00 24.4±1.67µs ? ?/sec 1.01 24.7±0.40µs ? ?/sec
empty_systems/055_systems 1.05 28.6±5.27µs ? ?/sec 1.00 27.2±0.70µs ? ?/sec
empty_systems/060_systems 1.02 29.9±1.64µs ? ?/sec 1.00 29.3±0.66µs ? ?/sec
empty_systems/065_systems 1.02 32.7±3.15µs ? ?/sec 1.00 32.1±0.98µs ? ?/sec
empty_systems/070_systems 1.00 33.0±1.42µs ? ?/sec 1.03 34.1±1.44µs ? ?/sec
empty_systems/075_systems 1.00 34.8±0.89µs ? ?/sec 1.04 36.2±0.70µs ? ?/sec
empty_systems/080_systems 1.00 37.0±1.82µs ? ?/sec 1.05 38.7±1.37µs ? ?/sec
empty_systems/085_systems 1.00 38.7±0.76µs ? ?/sec 1.05 40.8±0.83µs ? ?/sec
empty_systems/090_systems 1.00 41.5±1.09µs ? ?/sec 1.04 43.2±0.82µs ? ?/sec
empty_systems/095_systems 1.00 43.6±1.10µs ? ?/sec 1.04 45.2±0.99µs ? ?/sec
empty_systems/100_systems 1.00 46.7±2.27µs ? ?/sec 1.03 48.1±1.25µs ? ?/sec
```
</details>
## Migration Guide
### App `runner` and SubApp `extract` functions are now required to be Send
This was changed to enable pipelined rendering. If this breaks your use case please report it as these new bounds might be able to be relaxed.
## ToDo
* [x] redo benchmarking
* [x] reinvestigate the perf of the try_tick -> run change for task pool scope
# Objective
- Add a configurable prepass
- A depth prepass is useful for various shader effects and to reduce overdraw. It can be expansive depending on the scene so it's important to be able to disable it if you don't need any effects that uses it or don't suffer from excessive overdraw.
- The goal is to eventually use it for things like TAA, Ambient Occlusion, SSR and various other techniques that can benefit from having a prepass.
## Solution
The prepass node is inserted before the main pass. It runs for each `Camera3d` with a prepass component (`DepthPrepass`, `NormalPrepass`). The presence of one of those components is used to determine which textures are generated in the prepass. When any prepass is enabled, the depth buffer generated will be used by the main pass to reduce overdraw.
The prepass runs for each `Material` created with the `MaterialPlugin::prepass_enabled` option set to `true`. You can overload the shader used by the prepass by using `Material::prepass_vertex_shader()` and/or `Material::prepass_fragment_shader()`. It will also use the `Material::specialize()` for more advanced use cases. It is enabled by default on all materials.
The prepass works on opaque materials and materials using an alpha mask. Transparent materials are ignored.
The `StandardMaterial` overloads the prepass fragment shader to support alpha mask and normal maps.
---
## Changelog
- Add a new `PrepassNode` that runs before the main pass
- Add a `PrepassPlugin` to extract/prepare/queue the necessary data
- Add a `DepthPrepass` and `NormalPrepass` component to control which textures will be created by the prepass and available in later passes.
- Add a new `prepass_enabled` flag to the `MaterialPlugin` that will control if a material uses the prepass or not.
- Add a new `prepass_enabled` flag to the `PbrPlugin` to control if the StandardMaterial uses the prepass. Currently defaults to false.
- Add `Material::prepass_vertex_shader()` and `Material::prepass_fragment_shader()` to control the prepass from the `Material`
## Notes
In bevy's sample 3d scene, the performance is actually worse when enabling the prepass, but on more complex scenes the performance is generally better. I would like more testing on this, but @DGriffin91 has reported a very noticeable improvements in some scenes.
The prepass is also used by @JMS55 for TAA and GTAO
discord thread: <https://discord.com/channels/691052431525675048/1011624228627419187>
This PR was built on top of the work of multiple people
Co-Authored-By: @superdump
Co-Authored-By: @robtfm
Co-Authored-By: @JMS55
Co-authored-by: Charles <IceSentry@users.noreply.github.com>
Co-authored-by: JMS55 <47158642+JMS55@users.noreply.github.com>
# Objective
Fix https://github.com/bevyengine/bevy/issues/4530
- Make it easier to open/close/modify windows by setting them up as `Entity`s with a `Window` component.
- Make multiple windows very simple to set up. (just add a `Window` component to an entity and it should open)
## Solution
- Move all properties of window descriptor to ~components~ a component.
- Replace `WindowId` with `Entity`.
- ~Use change detection for components to update backend rather than events/commands. (The `CursorMoved`/`WindowResized`/... events are kept for user convenience.~
Check each field individually to see what we need to update, events are still kept for user convenience.
---
## Changelog
- `WindowDescriptor` renamed to `Window`.
- Width/height consolidated into a `WindowResolution` component.
- Requesting maximization/minimization is done on the [`Window::state`] field.
- `WindowId` is now `Entity`.
## Migration Guide
- Replace `WindowDescriptor` with `Window`.
- Change `width` and `height` fields in a `WindowResolution`, either by doing
```rust
WindowResolution::new(width, height) // Explicitly
// or using From<_> for tuples for convenience
(1920., 1080.).into()
```
- Replace any `WindowCommand` code to just modify the `Window`'s fields directly and creating/closing windows is now by spawning/despawning an entity with a `Window` component like so:
```rust
let window = commands.spawn(Window { ... }).id(); // open window
commands.entity(window).despawn(); // close window
```
## Unresolved
- ~How do we tell when a window is minimized by a user?~
~Currently using the `Resize(0, 0)` as an indicator of minimization.~
No longer attempting to tell given how finnicky this was across platforms, now the user can only request that a window be maximized/minimized.
## Future work
- Move `exit_on_close` functionality out from windowing and into app(?)
- https://github.com/bevyengine/bevy/issues/5621
- https://github.com/bevyengine/bevy/issues/7099
- https://github.com/bevyengine/bevy/issues/7098
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
Speed up the render phase of rendering. An extension of #6885.
`SystemState::get` increments the `World`'s change tick atomically every time it's called. This is notably more expensive than a unsynchronized increment, even without contention. It also updates the archetypes, even when there has been nothing to update when it's called repeatedly.
## Solution
Piggyback off of #6885. Split `SystemState::validate_world_and_update_archetypes` into `SystemState::validate_world` and `SystemState::update_archetypes`, and make the later `pub`. Then create safe variants of `SystemState::get_unchecked_manual` that still validate the `World` but do not update archetypes and do not increment the change tick using `World::read_change_tick` and `World::change_tick`. Update `RenderCommandState` to call `SystemState::update_archetypes` in `Draw::prepare` and `SystemState::get_manual` in `Draw::draw`.
## Performance
There's a slight perf benefit (~2%) for `main_opaque_pass_3d` on `many_foxes` (340.39 us -> 333.32 us)
## Alternatives
We can change `SystemState::get` to not increment the `World`'s change tick. Though this would still put updating the archetypes and an atomic read on the hot-path.
---
## Changelog
Added: `SystemState::get_manual`
Added: `SystemState::get_manual_mut`
Added: `SystemState::update_archetypes`
# Objective
- Allow rendering queue systems to use a `Res<PipelineCache>` even for queueing up new rendering pipelines. This is part of unblocking parallel execution queue systems.
## Solution
- Make `PipelineCache` internally mutable w.r.t to queueing new pipelines. Pipelines are no longer immediately updated into the cache state, but rather queued into a Vec. The Vec of pending new pipelines is then later processed at the same time we actually create the queued pipelines on the GPU device.
---
## Changelog
`PipelineCache` no longer requires mutable access in order to queue render / compute pipelines.
## Migration Guide
* Most usages of `resource_mut::<PipelineCache>` and `ResMut<PipelineCache>` can be changed to `resource::<PipelineCache>` and `Res<PipelineCache>` as long as they don't use any methods requiring mutability - the only public method requiring it is `process_queue`.
# Objective
The documentation of the bevy_render crate is still pretty incomplete.
This PR follows up on #6885 and improves the documentation of the `render_phase` module.
This module contains one of our most important rendering abstractions and the current documentation is pretty confusing. This PR tries to clarify what all of these pieces are for and how they work together to form bevy`s modular rendering logic.
## Solution
### Code Reformating
- I have moved the `rangefinder` into the `render_phase` module since it is only used there.
- I have moved the `PhaseItem` (and the `BatchedPhaseItem`) from `render_phase::draw` over to `render_phase::mod`. This does not change the public-facing API since they are reexported anyway, but this change makes the relation between `RenderPhase` and `PhaseItem` clear and easier to discover.
### Documentation
- revised all documentation in the `render_phase` module
- added a module-level explanation of how `RenderPhase`s, `RenderPass`es, `PhaseItem`s, `Draw` functions, and `RenderCommands` relate to each other and how they are used
---
## Changelog
- The `rangefinder` module has been moved into the `render_phase` module.
## Migration Guide
- The `rangefinder` module has been moved into the `render_phase` module.
```rust
//old
use bevy::render::rangefinder::*;
// new
use bevy::render::render_phase::rangefinder::*;
```
# Objective
- There is a warning when building in release:
```
warning: unused import: `bevy_ecs::system::Local`
--> crates/bevy_render/src/extract_resource.rs:5:5
|
5 | use bevy_ecs::system::Local;
| ^^^^^^^^^^^^^^^^^^^^^^^
|
= note: `#[warn(unused_imports)]` on by default
```
- It's used 59751d6e33/crates/bevy_render/src/extract_resource.rs (L47)
- Fix it
## Solution
- Gate the import
- repeat of #5320
As mentioned in https://github.com/bevyengine/bevy/pull/6530. It allows to not create a new constant and simply having it to show up in the documentation when someone is looking for "transparent" (case insensitive) in rustdoc search.
cc @alice-i-cecile
# Objective
- Fixes#7066
## Solution
- Split the ChangeDetection trait into ChangeDetection and ChangeDetectionMut
- Added Ref as equivalent to &T with change detection
---
## Changelog
- Support for Ref which allow inspecting change detection flags in an immutable way
## Migration Guide
- While bevy prelude includes both ChangeDetection and ChangeDetectionMut any code explicitly referencing ChangeDetection might need to be updated to ChangeDetectionMut or both. Specifically any reading logic requires ChangeDetection while writes requires ChangeDetectionMut.
use bevy_ecs::change_detection::DetectChanges -> use bevy_ecs::change_detection::{DetectChanges, DetectChangesMut}
- Previously Res had methods to access change detection `is_changed` and `is_added` those methods have been moved to the `DetectChanges` trait. If you are including bevy prelude you will have access to these types otherwise you will need to `use bevy_ecs::change_detection::DetectChanges` to continue using them.
# Objective
Fixes#3310. Fixes#6282. Fixes#6278. Fixes#3666.
## Solution
Split out `!Send` resources into `NonSendResources`. Add a `origin_thread_id` to all `!Send` Resources, check it on dropping `NonSendResourceData`, if there's a mismatch, panic. Moved all of the checks that `MainThreadValidator` would do into `NonSendResources` instead.
All `!Send` resources now individually track which thread they were inserted from. This is validated against for every access, mutation, and drop that could be done against the value.
A regression test using an altered version of the example from #3310 has been added.
This is a stopgap solution for the current status quo. A full solution may involve fully removing `!Send` resources/components from `World`, which will likely require a much more thorough design on how to handle the existing in-engine and ecosystem use cases.
This PR also introduces another breaking change:
```rust
use bevy_ecs::prelude::*;
#[derive(Resource)]
struct Resource(u32);
fn main() {
let mut world = World::new();
world.insert_resource(Resource(1));
world.insert_non_send_resource(Resource(2));
let res = world.get_resource_mut::<Resource>().unwrap();
assert_eq!(res.0, 2);
}
```
This code will run correctly on 0.9.1 but not with this PR, since NonSend resources and normal resources have become actual distinct concepts storage wise.
## Changelog
Changed: Fix soundness bug with `World: Send`. Dropping a `World` that contains a `!Send` resource on the wrong thread will now panic.
## Migration Guide
Normal resources and `NonSend` resources no longer share the same backing storage. If `R: Resource`, then `NonSend<R>` and `Res<R>` will return different instances from each other. If you are using both `Res<T>` and `NonSend<T>` (or their mutable variants), to fetch the same resources, it's strongly advised to use `Res<T>`.
# Objective
Speed up the render phase for rendering.
## Solution
- Follow up #6988 and make the internals of atomic IDs `NonZeroU32`. This niches the `Option`s of the IDs in draw state, which reduces the size and branching behavior when evaluating for equality.
- Require `&RenderDevice` to get the device's `Limits` when initializing a `TrackedRenderPass` to preallocate the bind groups and vertex buffer state in `DrawState`, this removes the branch on needing to resize those `Vec`s.
## Performance
This produces a similar speed up akin to that of #6885. This shows an approximate 6% speed up in `main_opaque_pass_3d` on `many_foxes` (408.79 us -> 388us). This should be orthogonal to the gains seen there.
---
## Changelog
Added: `RenderContext::begin_tracked_render_pass`.
Changed: `TrackedRenderPass` now requires a `&RenderDevice` on construction.
Removed: `bevy_render::render_phase::DrawState`. It was not usable in any form outside of `bevy_render`.
## Migration Guide
TODO
# Objective
- This pulls out some of the changes to Plugin setup and sub apps from #6503 to make that PR easier to review.
- Separate the extract stage from running the sub app's schedule to allow for them to be run on separate threads in the future
- Fixes#6990
## Solution
- add a run method to `SubApp` that runs the schedule
- change the name of `sub_app_runner` to extract to make it clear that this function is only for extracting data between the main app and the sub app
- remove the extract stage from the sub app schedule so it can be run separately. This is done by adding a `setup` method to the `Plugin` trait that runs after all plugin build methods run. This is required to allow the extract stage to be removed from the schedule after all the plugins have added their systems to the stage. We will also need the setup method for pipelined rendering to setup the render thread. See e3267965e1/crates/bevy_render/src/pipelined_rendering.rs (L57-L98)
## Changelog
- Separate SubApp Extract stage from running the sub app schedule.
## Migration Guide
### SubApp `runner` has conceptually been changed to an `extract` function.
The `runner` no longer is in charge of running the sub app schedule. It's only concern is now moving data between the main world and the sub app. The `sub_app.app.schedule` is now run for you after the provided function is called.
```rust
// before
fn main() {
let sub_app = App::empty();
sub_app.add_stage(MyStage, SystemStage::parallel());
App::new().add_sub_app(MySubApp, sub_app, move |main_world, sub_app| {
extract(app_world, render_app);
render_app.app.schedule.run();
});
}
// after
fn main() {
let sub_app = App::empty();
sub_app.add_stage(MyStage, SystemStage::parallel());
App::new().add_sub_app(MySubApp, sub_app, move |main_world, sub_app| {
extract(app_world, render_app);
// schedule is automatically called for you after extract is run
});
}
```
# Objective
- Storage buffers are useful and not currently supported by the `AsBindGroup` derive which means you need to expand the macro if you need a storage buffer
## Solution
- Add a new `#[storage]` attribute to the derive `AsBindGroup` macro.
- Support and optional `read_only` parameter that defaults to false when not present.
- Support visibility parameters like the texture and sampler attributes.
---
## Changelog
- Add a new `#[storage(index)]` attribute to the derive `AsBindGroup` macro.
Co-authored-by: IceSentry <IceSentry@users.noreply.github.com>
# Objective
- Avoid slower than necessary first frame after spawning many entities due to them not having `Aabb`s and so being marked visible
- Avoids unnecessarily large system and VRAM allocations as a consequence
## Solution
- I noticed when debugging the `many_cubes` stress test in Xcode that the `MeshUniform` binding was much larger than it needed to be. I realised that this was because initially, all mesh entities are marked as being visible because they don't have `Aabb`s because `calculate_bounds` is being run in `PostUpdate` and there are no system commands applications before executing the visibility check systems that need the `Aabb`s. The solution then is to run the `calculate_bounds` system just before the previous system commands are applied which is at the end of the `Update` stage.
Spiritual successor to #5205.
Actual successor to #6865.
# Objective
Currently, system params are defined using three traits: `SystemParam`, `ReadOnlySystemParam`, `SystemParamState`. The behavior for each param is specified by the `SystemParamState` trait, while `SystemParam` simply defers to the state.
Splitting the traits in this way makes it easier to implement within macros, but it increases the cognitive load. Worst of all, this approach requires each `MySystemParam` to have a public `MySystemParamState` type associated with it.
## Solution
* Merge the trait `SystemParamState` into `SystemParam`.
* Remove all trivial `SystemParam` state types.
* `OptionNonSendMutState<T>`: you will not be missed.
---
- [x] Fix/resolve the remaining test failure.
## Changelog
* Removed the trait `SystemParamState`, merging its functionality into `SystemParam`.
## Migration Guide
**Note**: this should replace the migration guide for #6865.
This is relative to Bevy 0.9, not main.
The traits `SystemParamState` and `SystemParamFetch` have been removed, and their functionality has been transferred to `SystemParam`.
```rust
// Before (0.9)
impl SystemParam for MyParam<'_, '_> {
type State = MyParamState;
}
unsafe impl SystemParamState for MyParamState {
fn init(world: &mut World, system_meta: &mut SystemMeta) -> Self { ... }
}
unsafe impl<'w, 's> SystemParamFetch<'w, 's> for MyParamState {
type Item = MyParam<'w, 's>;
fn get_param(&mut self, ...) -> Self::Item;
}
unsafe impl ReadOnlySystemParamFetch for MyParamState { }
// After (0.10)
unsafe impl SystemParam for MyParam<'_, '_> {
type State = MyParamState;
type Item<'w, 's> = MyParam<'w, 's>;
fn init_state(world: &mut World, system_meta: &mut SystemMeta) -> Self::State { ... }
fn get_param<'w, 's>(state: &mut Self::State, ...) -> Self::Item<'w, 's>;
}
unsafe impl ReadOnlySystemParam for MyParam<'_, '_> { }
```
The trait `ReadOnlySystemParamFetch` has been replaced with `ReadOnlySystemParam`.
```rust
// Before
unsafe impl ReadOnlySystemParamFetch for MyParamState {}
// After
unsafe impl ReadOnlySystemParam for MyParam<'_, '_> {}
```
# Objective
- When using `Color::hex` for the first time, I was confused by the fact that I can't specify colors using #, which is much more familiar.
- In the code editor (if there is support) there is a preview of the color, which is very convenient.
## Solution
- Allow you to enter colors like `#ff33f2` and use the `.strip_prefix` method to delete the `#` character.
# Objective
Speed up the render phase of rendering. Simplify the trait structure for render commands.
## Solution
- Merge `EntityPhaseItem` into `PhaseItem` (`EntityPhaseItem::entity` -> `PhaseItem::entity`)
- Merge `EntityRenderCommand` into `RenderCommand`.
- Add two associated types to `RenderCommand`: `RenderCommand::ViewWorldQuery` and `RenderCommand::WorldQuery`.
- Use the new associated types to construct two `QueryStates`s for `RenderCommandState`.
- Hoist any `SQuery<T>` fetches in `EntityRenderCommand`s into the aformentioned two queries. Batch fetch them all at once.
## Performance
`main_opaque_pass_3d` is slightly faster on `many_foxes` (427.52us -> 401.15us)
The shadow pass node is also slightly faster (344.52 -> 338.24us)
## Future Work
- Can we hoist the view level queries out of the core loop?
---
## Changelog
Added: `PhaseItem::entity`
Added: `RenderCommand::ViewWorldQuery` associated type.
Added: `RenderCommand::ItemorldQuery` associated type.
Added: `Draw<T>::prepare` optional trait function.
Removed: `EntityPhaseItem` trait
## Migration Guide
TODO
# Objective
- The recently merged PR #7013 does not allow multiple `RenderPhase`s to share the same `RenderPass`.
- Due to the introduced overhead we want to minimize the number of `RenderPass`es recorded during each frame.
## Solution
- Take a constructed `TrackedRenderPass` instead of a `RenderPassDiscriptor` as a parameter to the `RenderPhase::render` method.
---
## Changelog
To enable multiple `RenderPhases` to share the same `TrackedRenderPass`,
the `RenderPhase::render` signature has changed.
```rust
pub fn render<'w>(
&self,
render_pass: &mut TrackedRenderPass<'w>,
world: &'w World,
view: Entity)
```
Co-authored-by: Kurt Kühnert <51823519+kurtkuehnert@users.noreply.github.com>
# Objective
`TEXTURE_ADAPTER_SPECIFIC_FORMAT_FEATURES` was already included in `adapter.features()` on non-wasm target, and since it is the default value for `WgpuSettings.features`, the subsequent code will also combine into this feature:
b6066c30b6/crates/bevy_render/src/renderer/mod.rs (L155-L156)
# Objective
All `RenderPhases` follow the same render procedure.
The same code is duplicated multiple times across the codebase.
## Solution
I simply extracted this code into a method on the `RenderPhase`.
This avoids code duplication and makes setting up new `RenderPhases` easier.
---
## Changelog
### Changed
You can now set up the rendering code of a `RenderPhase` directly using the `RenderPhase::render` method, instead of implementing it manually in your render graph node.
# Objective
The documentation for camera priority is very confusing at the moment, it requires a bit of "double negative" kind of thinking.
# Solution
Flipping the wording on the documentation to reflect more common usecases like having an overlay camera and also renaming it to "order", since priority implies that it will override the other camera rather than have both run.
Consolidation of all the feedback about #6271 as well as the addition of an "unconditionally visible" mode.
# Objective
The current implementation of the `Visibility` struct simply wraps a boolean.. which seems like an odd pattern when rust has such nice enums that allow for more expression using pattern-matching.
Additionally as it stands Bevy only has two settings for visibility of an entity:
- "unconditionally hidden" `Visibility { is_visible: false }`,
- "inherit visibility from parent" `Visibility { is_visible: true }`
where a root level entity set to "inherit" is visible.
Note that given the behaviour, the current naming of the inner field is a little deceptive or unclear.
Using an enum for `Visibility` opens the door for adding an extra behaviour mode. This PR adds a new "unconditionally visible" mode, which causes an entity to be visible even if its Parent entity is hidden. There should not really be any performance cost to the addition of this new mode.
--
The recently added `toggle` method is removed in this PR, as its semantics could be confusing with 3 variants.
## Solution
Change the Visibility component into
```rust
enum Visibility {
Hidden, // unconditionally hidden
Visible, // unconditionally visible
Inherited, // inherit visibility from parent
}
```
---
## Changelog
### Changed
`Visibility` is now an enum
## Migration Guide
- evaluation of the `visibility.is_visible` field should now check for `visibility == Visibility::Inherited`.
- setting the `visibility.is_visible` field should now directly set the value: `*visibility = Visibility::Inherited`.
- usage of `Visibility::VISIBLE` or `Visibility::INVISIBLE` should now use `Visibility::Inherited` or `Visibility::Hidden` respectively.
- `ComputedVisibility::INVISIBLE` and `SpatialBundle::VISIBLE_IDENTITY` have been renamed to `ComputedVisibility::HIDDEN` and `SpatialBundle::INHERITED_IDENTITY` respectively.
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
- alternative to #2895
- as mentioned in #2535 the uuid based ids in the render module should be replaced with atomic-counted ones
## Solution
- instead of generating a random UUID for each render resource, this implementation increases an atomic counter
- this might be replaced by the ids of wgpu if they expose them directly in the future
- I have not benchmarked this solution yet, but this should be slightly faster in theory.
- Bevymark does not seem to be affected much by this change, which is to be expected.
- Nothing of our API has changed, other than that the IDs have lost their IMO rather insignificant documentation.
- Maybe the documentation could be added back into the macro, but this would complicate the code.
# Objective
The `WgpuSettings` resource is only used during plugin build. Move it into the `RenderPlugin` struct.
Changing these settings requires re-initializing the render context, which is currently not supported.
If it is supported in the future it should probably be more explicit than changing a field on a resource, maybe something similar to the `CreateWindow` event.
## Migration Guide
```rust
// Before (0.9)
App::new()
.insert_resource(WgpuSettings { .. })
.add_plugins(DefaultPlugins)
// After (0.10)
App::new()
.add_plugins(DefaultPlugins.set(RenderPlugin {
wgpu_settings: WgpuSettings { .. },
}))
```
Co-authored-by: devil-ira <justthecooldude@gmail.com>
# Objective
Following #4402, extract systems run on the render world instead of the main world, and allow retained state operations on it's resources. We're currently extracting to `ExtractedJoints` and then copying it twice during Prepare. Once into `SkinnedMeshJoints` and again into the actual GPU buffer.
This makes #4902 obsolete.
## Solution
Cut out the middle copy and directly extract joints into `SkinnedMeshJoints` and remove `ExtractedJoints` entirely.
This also removes the per-frame allocation that is being made to send `ExtractedJoints` into the render world.
## Performance
On my local machine, this halves the time for `prepare_skinned _meshes` on `many_foxes` (195.75us -> 93.93us on average).
---
## Changelog
Added: `BufferVec::truncate`
Added: `BufferVec::extend`
Changed: `SkinnedMeshJoints::build` now takes a `&mut BufferVec` instead of a `&mut Vec` as a parameter.
Removed: `ExtractedJoints`.
## Migration Guide
`ExtractedJoints` has been removed. Read the bound bones from `SkinnedMeshJoints` instead.
# Objective
`AsBindGroup` can't be used as a trait object because of the constraint `Sized` and because of the associated function.
This is a problem for [`bevy_atmosphere`](https://github.com/JonahPlusPlus/bevy_atmosphere) because it needs to use a trait that depends on `AsBindGroup` as a trait object, for switching out different shaders at runtime. The current solution it employs is reimplementing the trait and derive macro into that trait, instead of constraining to `AsBindGroup`.
## Solution
Remove the `Sized` constraint from `AsBindGroup` and add the constraint `where Self: Sized` to the associated function `bind_group_layout`. Also change `PreparedBindGroup<T: AsBindGroup>` to `PreparedBindGroup<T>` and use it as `PreparedBindGroup<Self::Data>` instead of `PreparedBindGroup<Self>`.
This weakens the constraints, but increases the flexibility of `AsBindGroup`.
I'm not entirely sure why the `Sized` constraint was there, because it worked fine without it (maybe @cart wasn't aware of use cases for `AsBindGroup` as a trait object or this was just leftover from legacy code?).
---
## Changelog
- `AsBindGroup` can be used as a trait object.
# Objective
[Rust 1.66](https://blog.rust-lang.org/inside-rust/2022/12/12/1.66.0-prerelease.html) is coming in a few days, and bevy doesn't build with it.
Fix that.
## Solution
Replace output from a trybuild test, and fix a few new instances of `needless_borrow` and `unnecessary_cast` that are now caught.
## Note
Due to the trybuild test, this can't be merged until 1.66 is released.
# Objective
The following code:
```rs
use bevy::prelude::Image;
use image::{ DynamicImage, GenericImage, Rgba };
fn main() {
let mut dynamic_image = DynamicImage::new_rgb32f(1, 1);
dynamic_image.put_pixel(0, 0, Rgba([1, 1, 1, 1]));
let image = Image::from_dynamic(dynamic_image, false); // Panic!
println!("{image:?}");
}
```
Can cause an assertion failed:
```
thread 'main' panicked at 'assertion failed: `(left == right)`
left: `16`,
right: `14`: Pixel data, size and format have to match', .../bevy_render-0.9.1/src/texture/image.rs:209:9
stack backtrace:
...
4: core::panicking::assert_failed<usize,usize>
at /rustc/897e37553bba8b42751c67658967889d11ecd120/library/core/src/panicking.rs:181
5: bevy_render::texture::image::Image::new
at .../bevy_render-0.9.1/src/texture/image.rs:209
6: bevy_render::texture::image::Image::from_dynamic
at .../bevy_render-0.9.1/src/texture/image_texture_conversion.rs:159
7: bevy_test::main
at ./src/main.rs:8
...
```
It seems to be cause by a copypasta in `crates/bevy_render/src/texture/image_texture_conversion.rs`. Let's fix it.
## Solution
```diff
// DynamicImage::ImageRgb32F(image) => {
- let a = u16::max_value();
+ let a = 1f32;
```
This will fix the conversion.
---
## Changelog
- Fixed the alpha channel of the `image::DynamicImage::ImageRgb32F` to `bevy_render::texture::Image` conversion in `bevy_render::texture::Image::from_dynamic()`.
# Objective
- https://github.com/bevyengine/bevy/pull/5364 Added a few features to the AsBindGroup derive, but if you don't know they exist they aren't documented anywhere.
## Solution
- Document the new arguments in the doc block for the derive.
# Objective
```rust
// makes clippy complain about 'taking a mutable reference to a `const` item'
let color = *Color::RED.set_a(0.5);
// Now you can do
let color = Color::RED.with_a(0.5);
```
## Changelog
Added `with_r`, `with_g`, `with_b`, and `with_a` to `Color`.
Co-authored-by: devil-ira <justthecooldude@gmail.com>
# Objective
* Implementing a custom `SystemParam` by hand requires implementing three traits -- four if it is read-only.
* The trait `SystemParamFetch<'w, 's>` is a workaround from before we had generic associated types, and is no longer necessary.
## Solution
* Combine the trait `SystemParamFetch` with `SystemParamState`.
* I decided to remove the `Fetch` name and keep the `State` name, since the former was consistently conflated with the latter.
* Replace the trait `ReadOnlySystemParamFetch` with `ReadOnlySystemParam`, which simplifies trait bounds in generic code.
---
## Changelog
- Removed the trait `SystemParamFetch`, moving its functionality to `SystemParamState`.
- Replaced the trait `ReadOnlySystemParamFetch` with `ReadOnlySystemParam`.
## Migration Guide
The trait `SystemParamFetch` has been removed, and its functionality has been transferred to `SystemParamState`.
```rust
// Before
impl SystemParamState for MyParamState {
fn init(world: &mut World, system_meta: &mut SystemMeta) -> Self { ... }
}
impl<'w, 's> SystemParamFetch<'w, 's> for MyParamState {
type Item = MyParam<'w, 's>;
fn get_param(...) -> Self::Item;
}
// After
impl SystemParamState for MyParamState {
type Item<'w, 's> = MyParam<'w, 's>; // Generic associated types!
fn init(world: &mut World, system_meta: &mut SystemMeta) -> Self { ... }
fn get_param<'w, 's>(...) -> Self::Item<'w, 's>;
}
```
The trait `ReadOnlySystemParamFetch` has been replaced with `ReadOnlySystemParam`.
```rust
// Before
unsafe impl ReadOnlySystemParamFetch for MyParamState {}
// After
unsafe impl<'w, 's> ReadOnlySystemParam for MyParam<'w, 's> {}
```
# Objective
- Get rid of giant match statement to get PixelInfo.
- This will allow for supporting any texture that is uncompressed, instead of people needing to PR in any textures that are supported in wgpu, but not bevy.
## Solution
- More conservative alternative to https://github.com/bevyengine/bevy/pull/6788, where we don't try to make some of the calculations correct for compressed types.
- Delete `PixelInfo` and get the pixel_size directly from wgpu. Data from wgpu is here: https://docs.rs/wgpu-types/0.14.0/src/wgpu_types/lib.rs.html#2359
- Panic if the texture is a compressed type. An integer byte size of a pixel is no longer a valid concept when talking about compressed textures.
- All internal usages use `pixel_size` and not `pixel_info` and are on uncompressed formats. Most of these usages are on either explicit texture formats or slightly indirectly through `TextureFormat::bevy_default()`. The other uses are in `TextureAtlas` and have other calculations that assumes the texture is uncompressed.
## Changelog
- remove `PixelInfo` and get `pixel_size` from wgpu
## Migration Guide
`PixelInfo` has been removed. `PixelInfo::components` is equivalent to `texture_format.describe().components`. `PixelInfo::type_size` can be gotten from `texture_format.describe().block_size/ texture_format.describe().components`. But note this can yield incorrect results for some texture types like Rg11b10Float.
# Objective
Adds a cylinder shape. Fixes#2282.
## Solution
- I added a custom cylinder shape, taken from [here](https://github.com/rparrett/typey_birb/blob/main/src/cylinder.rs) with permission from @rparrett.
- I also added the cylinder shape to the `3d_shapes` example scene.
---
## Changelog
- Added cylinder shape
Co-Authored-By: Rob Parrett <robparrett@gmail.com>
Co-Authored-By: davidhof <7483215+davidhof@users.noreply.github.com>
# Objective
- Fixes#6841
- In some case, the number of maximum storage buffers is `u32::MAX` which doesn't fit in a `i32`
## Solution
- Add an option to have a `u32` in a `ShaderDefVal`
# Objective
`prepare_asset` for Image has an alternate path for texture creation that is used when the image is not compressed and does not contain mipmaps. This additional code path is unnecessary as `render_device.create_texture_with_data()` will handle both cases correctly.
## Solution
Use `render_device.create_texture_with_data()` in all cases.
Tested successfully with the following examples:
- load_gltf
- render_to_texture
- texture
- 3d_shapes
- sprite
- sprite_sheet
- array_texture
- shader_material_screenspace_texture
- skybox (though this already would use the `create_texture_with_data()` branch anyway)
# Objective
The soundness of the ECS `World` partially relies on the correctness of the state of `Entities` stored within it. We're currently allowing users to (unsafely) mutate it, as well as readily construct it without using a `World`. While this is not strictly unsound so long as users (including `bevy_render`) safely use the APIs, it's a fairly easy path to unsoundness without much of a guard rail.
Addresses #3362 for `bevy_ecs::entity`. Incorporates the changes from #3985.
## Solution
Remove `Entities`'s `Default` implementation and force access to the type to only be through a properly constructed `World`.
Additional cleanup for other parts of `bevy_ecs::entity`:
- `Entity::index` and `Entity::generation` are no longer `pub(crate)`, opting to force the rest of bevy_ecs to use the public interface to access these values.
- `EntityMeta` is no longer `pub` and also not `pub(crate)` to attempt to cut down on updating `generation` without going through an `Entities` API. It's currently inaccessible except via the `pub(crate)` Vec on `Entities`, there was no way for an outside user to use it.
- Added `Entities::set`, an unsafe `pub(crate)` API for setting the location of an Entity (parallel to `Entities::get`) that replaces the internal case where we need to set the location of an entity when it's been spawned, moved, or despawned.
- `Entities::alloc_at_without_replacement` is only used in `World::get_or_spawn` within the first party crates, and I cannot find a public use of this API in any ecosystem crate that I've checked (via GitHub search).
- Attempted to document the few remaining undocumented public APIs in the module.
---
## Changelog
Removed: `Entities`'s `Default` implementation.
Removed: `EntityMeta`
Removed: `Entities::alloc_at_without_replacement` and `AllocAtWithoutReplacement`.
Co-authored-by: james7132 <contact@jamessliu.com>
Co-authored-by: James Liu <contact@jamessliu.com>
# Objective
- Since #5900 3d examples fail in wasm
```
ERROR crates/bevy_render/src/render_resource/pipeline_cache.rs:660 failed to process shader: Unknown shader def: 'AVAILABLE_STORAGE_BUFFER_BINDINGS'
```
## Solution
- Fix it by always adding the shaderdef `AVAILABLE_STORAGE_BUFFER_BINDINGS` with the actual value, instead of 3 when 3 or more were available
# Objective
- Support textures in `Rgb9e5Ufloat` format.
## Solution
- Add `TextureFormatPixelInfo` for `Rgb9e5Ufloat`.
Tested this with a `Rgb9e5Ufloat` encoded KTX2 texture.
# Objective
- Every usage of `DrawFunctionsInternals::get_id()` was followed by a `.unwrap()`. which just adds boilerplate.
## Solution
- Introduce a fallible version of `DrawFunctionsInternals::get_id()` and use it where possible.
- I also took the opportunity to improve the error message a little in the case where it fails.
---
## Changelog
- Added `DrawFunctionsInternals::id()`
# Objective
- Reduce confusion around uniform bindings in materials. I've seen multiple people on discord get confused by it because it uses a struct that is named the same in the rust code and the wgsl code, but doesn't contain the same data. Also, the only reason this works is mostly by chance because the memory happens to align correctly.
## Solution
- Remove the confusing parts of the doc
## Notes
It's not super clear in the diff why this causes confusion, but essentially, the rust code defines a `CustomMaterial` struct with a color and a texture, but in the wgsl code the struct with the same name only contains the color. People are confused by it because the struct in wgsl doesn't need to be there.
You _can_ have complex structs on each side and the macro will even combine it for you if you reuse a binding index, but as it is now, this example seems to confuse more than help people.
# Objective
Many types in `bevy_render` implemented `Reflect` but were not registered.
## Solution
Register all types in `bevy_render` that impl `Reflect`.
This also registers additional dependent types (i.e. field types).
> Note: Adding these dependent types would not be needed using something like #5781😉
---
## Changelog
- Register missing `bevy_render` types in the `TypeRegistry`:
- `camera::RenderTarget`
- `globals::GlobalsUniform`
- `texture::Image`
- `view::ComputedVisibility`
- `view::Visibility`
- `view::VisibleEntities`
- Register additional dependent types:
- `view::ComputedVisibilityFlags`
- `Vec<Entity>`
# Objective
- shaders defs can now have a `bool` or `int` value
- `#if SHADER_DEF <operator> 3`
- ok if `SHADER_DEF` is defined, has the correct type and pass the comparison
- `==`, `!=`, `>=`, `>`, `<`, `<=` supported
- `#SHADER_DEF` or `#{SHADER_DEF}`
- will be replaced by the value in the shader code
---
## Migration Guide
- replace `shader_defs.push(String::from("NAME"));` by `shader_defs.push("NAME".into());`
- if you used shader def `NO_STORAGE_BUFFERS_SUPPORT`, check how `AVAILABLE_STORAGE_BUFFER_BINDINGS` is now used in Bevy default shaders
# Objective
`add_node_edge` and `add_slot_edge` are fallible methods, but are always used with `.unwrap()`.
`input_node` is often unwrapped as well.
This points to having an infallible behaviour as default, with an alternative fallible variant if needed.
Improves readability and ergonomics.
## Solution
- Change `add_node_edge` and `add_slot_edge` to panic on error.
- Change `input_node` to panic on `None`.
- Add `try_add_node_edge` and `try_add_slot_edge` in case fallible methods are needed.
- Add `get_input_node` to still be able to get an `Option`.
---
## Changelog
### Added
- `try_add_node_edge`
- `try_add_slot_edge`
- `get_input_node`
### Changed
- `add_node_edge` is now infallible (panics on error)
- `add_slot_edge` is now infallible (panics on error)
- `input_node` now panics on `None`
## Migration Guide
Remove `.unwrap()` from `add_node_edge` and `add_slot_edge`.
For cases where the error was handled, use `try_add_node_edge` and `try_add_slot_edge` instead.
Remove `.unwrap()` from `input_node`.
For cases where the option was handled, use `get_input_node` instead.
Co-authored-by: Torstein Grindvik <52322338+torsteingrindvik@users.noreply.github.com>
# Objective
Allow more use cases where the user may benefit from both `ExtractComponentPlugin` _and_ `UniformComponentPlugin`.
## Solution
Add an associated type to `ExtractComponent` in order to allow specifying the output component (or bundle).
Make `extract_component` return an `Option<_>` such that components can be extracted only when needed.
What problem does this solve?
`ExtractComponentPlugin` allows extracting components, but currently the output type is the same as the input.
This means that use cases such as having a settings struct which turns into a uniform is awkward.
For example we might have:
```rust
struct MyStruct {
enabled: bool,
val: f32
}
struct MyStructUniform {
val: f32
}
```
With the new approach, we can extract `MyStruct` only when it is enabled, and turn it into its related uniform.
This chains well with `UniformComponentPlugin`.
The user may then:
```rust
app.add_plugin(ExtractComponentPlugin::<MyStruct>::default());
app.add_plugin(UniformComponentPlugin::<MyStructUniform>::default());
```
This then saves the user a fair amount of boilerplate.
## Changelog
### Changed
- `ExtractComponent` can specify output type, and outputting is optional.
Co-authored-by: Torstein Grindvik <52322338+torsteingrindvik@users.noreply.github.com>
# Objective
Latest Release, "bevy 0.9" move the FrameCount updater into RenderPlugin, it leads to user who only run app with Core/Minimal Plugin cannot get the right number of FrameCount, it always return 0.
As for use cases like a server app, we don't want to add render dependencies to the app.
More detail in #6656
## Solution
- Move the `update_frame_count` into CorePlugin
# Objective
This add a ctor to `Box` to aid the creation of non-centred boxes. The PR adopts @rezural's work on PR #3322, taking into account the feedback on that PR from @james7132.
## Solution
`Box::from_corners()` creates a `Box` from two opposing corners and automatically determines the min and max extents to ensure that the `Box` is well-formed.
Co-authored-by: rezural <rezural@protonmail.com>
# Objective
`ComputedVisibility` could afford to be smaller/faster. Optimizing the size and performance of operations on the component will positively benefit almost all extraction systems.
This was listed as one of the potential pieces of future work for #5310.
## Solution
Merge both internal booleans into a single `u8` bitflag field. Rely on bitmasks to evaluate local, hierarchical, and general visibility.
Pros:
- `ComputedVisibility::is_visible` should be a single bitmask test instead of two.
- `ComputedVisibility` is now only 1 byte. Should be able to fit 100% more per cache line when using dense iteration.
Cons:
- Harder to read.
- Setting individual values inside `ComputedVisiblity` require bitmask mutations.
This should be a non-breaking change. No public API was changed. The only publicly visible effect is that `ComputedVisibility` is now 1 byte instead of 2.
# Objective
`ScalingMode::Auto` for cameras only targets min_height and min_width, or as the docs say it `Use minimal possible viewport size while keeping the aspect ratio.`
But there is no ScalingMode that targets max_height and Max_width or `Use maximal possible viewport size while keeping the aspect ratio.`
## Solution
Added `ScalingMode::AutoMax` that does the exact opposite of `ScalingMode::Auto`
---
## Changelog
Renamed `ScalingMode::Auto` to `ScalingMode::AutoMin`.
## Migration Guide
just rename `ScalingMode::Auto` to `ScalingMode::AutoMin` if you are using it.
Co-authored-by: Lixou <82600264+DasLixou@users.noreply.github.com>
# Objective
- Fix#3606
- Fix#4579
- Fix#3380
## Solution
When running on a Linux machine with some AMD or Intel device, when calling
`surface.get_current_texture()`, ignore `wgpu::SurfaceError::Timeout` errors.
## Alternative
An alternative solution found in the `wgpu` examples is:
```rust
let frame = surface
.get_current_texture()
.or_else(|_| {
render_device.configure_surface(surface, &swap_chain_descriptor);
surface.get_current_texture()
})
.expect("Error reconfiguring surface");
window.swap_chain_texture = Some(TextureView::from(frame));
```
See: <94ce76391b/wgpu/examples/framework.rs (L362-L370)>
Veloren [handles the Timeout error the way this PR proposes to handle it](https://github.com/gfx-rs/wgpu/issues/1218#issuecomment-1092056971).
The reason I went with this PR's solution is that `configure_surface` seems to be quite an expensive operation, and it would run every frame with the wgpu framework solution, despite the fact it works perfectly fine without `configure_surface`.
I know this looks super hacky with the linux-specific line and the AMD check, but my understanding is that the `Timeout` occurrence is specific to a quirk of some AMD drivers on linux, and if otherwise met should be considered a bug.
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
Fixes#5393
## Solution
- Add padding to `GlobalsUniform` / `Globals` to make it 16-byte aligned.
Still not super clear on whether this is a `naga` thing or an `encase` thing or what. But now that we're offering `globals` up to users and #5393 is not just breaking an example, maybe we should do this sort of workaround?
# Objective
Some render plugins, like [bevy-hikari](https://github.com/cryscan/bevy-hikari) require to set `CameraRenderGraph`. In order to switch between render graphs I need to insert a new `CameraRenderGraph` component. It's not very ergonomic.
## Solution
Add `CameraRenderGraph::set` like in [Name](https://docs.rs/bevy/latest/bevy/core/struct.Name.html).
---
## Changelog
### Added
- `CameraRenderGraph::set`.
Allow passing `Vec`s of glam vector types as vertex attributes.
Alternative to #4548 and #2719
Also used some macros to cut down on all the repetition.
# Migration Guide
Implementations of `From<Vec<[u16; 4]>>` and `From<Vec<[u8; 4]>>` for `VertexAttributeValues` have been removed.
I you're passing either `Vec<[u16; 4]>` or `Vec<[u8; 4]>` into `Mesh::insert_attribute` it will now require wrapping it with right the `VertexAttributeValues` enum variant.
Co-authored-by: devil-ira <justthecooldude@gmail.com>
# Objective
Replace `WorldQueryGats` trait with actual gats
## Solution
Replace `WorldQueryGats` trait with actual gats
---
## Changelog
- Replaced `WorldQueryGats` trait with actual gats
## Migration Guide
- Replace usage of `WorldQueryGats` assoc types with the actual gats on `WorldQuery` trait
Respect mipmap_filter when create ImageDescriptor with linear()/nearest()
# Objective
Fixes#6348
## Migration Guide
This PR changes default `ImageSettings` and may lead to unexpected behaviour for existing projects with mipmapped textures. Users should provide custom `ImageSettings` resource with `mipmap_filter=FilterMode::Nearest` if they want to keep old behaviour.
Co-authored-by: Yakov Borevich <j.borevich@gmail.com>
This reverts commit 53d387f340.
# Objective
Reverts #6448. This didn't have the intended effect: we're now getting bevy::prelude shown in the docs again.
Co-authored-by: Alejandro Pascual <alejandro.pascual.pozo@gmail.com>
# Objective
- Right now re-exports are completely hidden in prelude docs.
- Fixes#6433
## Solution
- We could show the re-exports without inlining their documentation.
# Objective
Post processing effects cannot read and write to the same texture. Currently they must own their own intermediate texture and redundantly copy from that back to the main texture. This is very inefficient.
Additionally, working with ViewTarget is more complicated than it needs to be, especially when working with HDR textures.
## Solution
`ViewTarget` now stores two copies of the "main texture". It uses an atomic value to track which is currently the "main texture" (this interior mutability is necessary to accommodate read-only RenderGraph execution).
`ViewTarget` now has a `post_process_write` method, which will return a source and destination texture. Each call to this method will flip between the two copies of the "main texture".
```rust
let post_process = render_target.post_process_write();
let source_texture = post_process.source;
let destination_texture = post_process.destination;
```
The caller _must_ read from the source texture and write to the destination texture, as it is assumed that the destination texture will become the new "main texture".
For simplicity / understandability `ViewTarget` is now a flat type. "hdr-ness" is a property of the `TextureFormat`. The internals are fully private in the interest of providing simple / consistent apis. Developers can now easily access the main texture by calling `view_target.main_texture()`.
HDR ViewTargets no longer have an "ldr texture" with `TextureFormat::bevy_default`. They _only_ have their two "hdr" textures. This simplifies the mental model. All we have is the "currently active hdr texture" and the "other hdr texture", which we flip between for post processing effects.
The tonemapping node has been rephrased to use this "post processing pattern". The blit pass has been removed, and it now only runs a pass when HDR is enabled. Notably, both the input and output texture are assumed to be HDR. This means that tonemapping behaves just like any other "post processing effect". It could theoretically be moved anywhere in the "effect chain" and continue to work.
In general, I think these changes will make the lives of people making post processing effects much easier. And they better position us to start building higher level / more structured "post processing effect stacks".
---
## Changelog
- `ViewTarget` now stores two copies of the "main texture". Calling `ViewTarget::post_process_write` will flip between copies of the main texture.
# Objective
Bevy still has many instances of using single-tuples `(T,)` to create a bundle. Due to #2975, this is no longer necessary.
## Solution
Search for regex `\(.+\s*,\)`. This should have found every instance.
