Commit graph

25666 commits

Author SHA1 Message Date
Simon Glass
91943ff703 bootstd: Allow scanning a single bootdev label
We want to support scanning a single label, like 'mmc' or 'usb0'. Add
this feature by plumbing the label through to the iterator, setting a
flag to indicate that only siblings of the initial device should be used.

This means that scanning a bootdev by its name is not supported anymore.
That feature doesn't seem very useful in practice, so it is no great loss.

Add a test for bootdev_find_by_any() while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:41 -05:00
Simon Glass
47aedc29dc bootstd: Switch bootdev scanning to use labels
At present we set up the bootdev order at the start, then scan the
bootdevs one by one.

However this approach cannot be used with hunters, since the bootdevs may
not exist until the hunter is used. Nor can we just run all the hunters at
the start, since that violate's U-Boot's 'lazy init' requirement. It also
increases boot time.

So we need to adjust the algorithm to scan by labels instead. As a first
step, drop the dev_order[] array in favour of a list of labels. Update the
name of bootdev_setup_iter_order() to better reflect what it does.

Update some related comments and log messages. Also disable a few tests
until a later commit where we can use them.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:41 -05:00
Simon Glass
43e89a3069 bootstd: Allow iterating to the next bootdev priortiy
Add a function which moves to the next priority to be processed.

This works by storing the current priority in the bootflow iterator. The
logic to set this up is included in a subsequent commit.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:41 -05:00
Simon Glass
e4b694893f bootstd: Allow iterating to the next label in a list
Add a function which moves to the next label in a list of labels. This
allows processing the boot_targets environment variable.

This works using a new label list in the bootflow iterator. The logic to
set this up is included in a subsequent commit.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:41 -05:00
Simon Glass
66e3dce787 bootstd: Allow hunting for a bootdev by label
Add a function to hunt for a bootdev label and find the bootdev produced
by the hunter (or already present).

Add a few extra flags so that we can distinguish between "mmc1", "mmc" and
"1" which all need to be handled differently.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:41 -05:00
Simon Glass
eacc261178 bootstd: Add a new pre-scan priority for bootdevs
We need extensions to be set up before we start trying to boot any of the
bootdevs. Add a new priority before all the others for tht sort of thing.
Also add a 'none' option, so that the first one is not 0.

While we are here, comment enum bootdev_prio_t fully and expand the test
for the 'bootdev hunt' command.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:41 -05:00
Simon Glass
79a7d4a61f bootstd: Allow hunting for bootdevs of a given priority
Add a way to run the hunter function for a particular priority, so that
new bootdevs can be found.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:41 -05:00
Simon Glass
d73420e4fe bootstd: Use hunters when scanning for bootflows
Add a flag to control whether hunters are used when scanning for
bootflows. Enable it by default and tidy up the flag comments a little.

Fow now this has no effect, until a future patch enables this feature.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:41 -05:00
Simon Glass
d9f48579dc bootstd: Treat DHCP and PXE as bootdev labels
These are associated with the ethernet boot device but do not match its
uclass name, so handle them as special cases.

Provide a way to pass flags through with the bootdev so that we know
how to process it. The flags are checked by the bootmeths, to ensure that
only the selected bootmeth is used.

While these both use the network device, they work quite differently. It
is common to run only one of these, or to run PXE before DHCP. Provide
bootflow flags to control which methods are used. Check these in the two
bootmeths so that only the chosen one is used.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:41 -05:00
Simon Glass
0c1f4a9fb1 bootstd: Add a SPI flash bootdev
Add a bootdev for SPI flash so that these devices can be used with
standard boot. It only supports loading a script.

Add a special case for the label, since we want to use "spi", not
"spi_flash".

Enable the new bootdev on sandbox.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:41 -05:00
Simon Glass
081bdc52c1 sandbox: Allow SPI flash bootdevs to be disabled for tests
Most tests don't want these and they can create a lot of noise. Add a way
to disable them. Use that in tests, with a flag provided to enable them
for tests that need this feature.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:41 -05:00
Simon Glass
22061d3d2a bootstd: Add a new bootmeth method to set the bootflow
Normally the bootmeth driver reads the bootflow from the bootdev, since
it knows the correct way to do it.

However it is easier for some bootdevs to handle this themselves. For
example, reading from SPI flash is quite different from other devices.

Add a way for the bootdev to pass a bootflow to the bootmeth, so that
this can be supported.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:41 -05:00
Simon Glass
a58e7bbeb6 bootstd: Update docs on bootmeth_try_file() for sandbox
Mention that this function is also used with a NULL block devices to
access files on the host, when using sandbox.

Update the comment on struct bootflow also.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:40 -05:00
Simon Glass
2536587902 bootstd: Set the distro_bootpart env var with scripts
This environment variable is supposed to be set so that the script knows
which partition holds the script. Set it before invoking the script.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:40 -05:00
Simon Glass
7638c85190 bootstd: Include the device tree in the bootflow
Some bootmeths provide a way to load a device tree as well as the base
OS image. Add a way to store this in the bootflow. Update the
'bootflow info' command to show this information.

Note that the device tree is not allocated, but instead is stored at
an address provided by an environment variable. This may need to be
adjusted at some point, but for now it works well and fits in with the
existing distro-boot scripts.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:40 -05:00
Simon Glass
865328c314 bootstd: Rename bootdev checkers
These functions return 0 if the check passes, so the names are somewhat
confusing. Rename them.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:40 -05:00
Simon Glass
f0e358f07d bootstd: Only scan bootable partitions
At present all partitions are scanned, whether marked bootable or not.
Use only bootable partitions, defaulting to partition 1 if none is
found.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:40 -05:00
Simon Glass
dcffa4428d part: Add a function to find the first bootable partition
If a disk has a bootable partition we are expected to use it to locate the
boot files. Add a function to find it.

To test this, update mmc1 to have two paritions, fixing up other tests
accordingly.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:40 -05:00
Simon Glass
c8c3fd24cc net: Add a function to run dhcp
At present this must be done by executing the command. Also it involves
fiddling with the environment to determine the correct autoload behaviour.

Ideally it should be possible to run network operations without even
having the command line present (CONFIG_CMDLINE).

For now, add a function to handle DHCP, so it can be called from a bootdev
more easily.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-01-23 18:11:40 -05:00
Simon Glass
8b03187121 test: Add a generic function to skip delays
At present this feature is sandbox-specific. For running tests on boards,
we need a nop version. Add one.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:40 -05:00
Simon Glass
c7b63d500d bootstd: Support running bootdev hunters
Add a way to run a bootdev hunter to find bootdevs of a certain type. Add
this to the 'bootdev hunt' command. Test for this are added in a later
patch, since a useful test needs some hunters to work with.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:40 -05:00
Simon Glass
bd90b09288 bootstd: Add the concept of a bootdev hunter
Some bootdevs must be enumerated before they appear. For example, USB
bootdevs are not visible until USB is enumerated.

With standard boot this needs to happen automatically, since we only
want to enumerate a bus if it is needed.

Add a way to define bootdev 'hunters' which can be used to hunt for
bootdevs of a given type. Track which ones have been used and add a
command to list them.

Include a clang work-around which seems to be needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:40 -05:00
Simon Glass
70dd88657b sandbox: Allow ethernet bootdevs to be disabled for tests
Most tests don't want these and can create a lot of noise. Add a way to
disable them. Use that in tests, with a flag provided to enable them for
tests that need this feature.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:39 -05:00
Simon Glass
f43b2df3e0 sandbox: Allow ethernet to be disabled at runtime
For bootstd tests it is seldom useful to have ethernet enabled. Add a way
to disable it, so that ethernet operations like tftpboot do nothing.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:39 -05:00
Simon Glass
b85fc8dbab bootstd: Add a default method to get bootflows
The code in these functions turns out to often be the same. Add a default
get_bootflow() function and allow the drivers to select it by setting
the method to NULL.

This saves a little code space.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:39 -05:00
Simon Glass
3a2cb96e5d dm: mmc: Use bootdev_setup_sibling_blk()
At present MMC uses the bootdev_setup_for_dev() function to set up the
bootdev. This is because MMC only has one block-device child, so does not
need to worry about naming of the bootdev.

However this inconsistency with other bootdevs that use block devices is a
bit annoying. The only real reason for it is to have a name like
'mmc0.bootdev' instead of 'mmc0.blk.bootdev'.

Update bootdev_setup_sibling_blk() to drop '.blk' from the name where it
appears, thus removing the only reason to use the bootdev_setup_for_dev().
Switch MMC over to the subling function.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:39 -05:00
Simon Glass
6a6638f093 bootstd: Remove special-case code for boot_targets
Rather than implement this as its own case in build_order(), process the
boot_targets environment variable in the bootstd_get_bootdev_order()
function. This allows build_order() to be simplified.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:39 -05:00
Simon Glass
3e96ed44e8 lib: Add a function to split a string into substrings
Some environment variables provide a space-separated list of strings. It
is easier to process these when they are broken out into an array of
strings.

Add a utility function to handle this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:39 -05:00
Simon Glass
3d01254140 dm: core: Support sorting devices with dm tree
Add a -s flag to sort the top-level devices in order of uclass ID.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:39 -05:00
Simon Glass
c0f19fedaa dm: core: Correct ordering of uclasses IDs
A few of these are out of order. Fix them.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:39 -05:00
Samuel Holland
dc1b1d1458 power: pmic: axp: Provide a variant ID in the driver data
Subordinate regulator drivers can use this enumerated ID instead of
matching the compatible string again.

Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2023-01-23 01:18:31 +00:00
Andre Przywara
eb53e7743c sunxi: h616: lower SPL stack address to avoid BROM data
When using the USB OTG FEL mode on the Allwinner H616, the BootROM
stores some data at the end of SRAM C. This is also the location where
we place the initial SPL stack, so it will overwrite this data.
We still need the BROM code after running the SPL, so should leave that
area alone.
Interestingly this does not seem to have an adverse effect, I guess on
the "way out" (when we return to FEL after the SPL has run), this data
is not needed by the BROM, for just the trailing end of the USB operation.
However this is still wrong, and we should not clobber BROM data.

Lower the SPL stack address to be situated right below the swap buffers
we use in sunxi-fel: that should be out of the way of everyone else.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Tested-by: Samuel Holland <samuel@sholland.org>
2023-01-21 01:32:23 +00:00
Tom Rini
dd31cd58b0 Pull request for efi-2023-04-rc1-2
Documentation
 
 * man-pages for source, blkcache, bdinfo
 * fix references to distro documentation
 
 UEFI:
 
 * allow clear screen by scrolling
 * ensure that file ubootefi.var is created
 * fix CapsuleMax variable reporting
 
 Others:
 
 * reduce verbosity of fat_read_file()
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAmPK4d8ACgkQxIHbvCwF
 GsTF7g/9GV5pCoXX3Z3y5s7aLdbCrTxl0R1cMkVEupwQ2t9kIhenVxI1xC/lYIq4
 8DQN5LEB98iH9Ivl28nnsbQnznHlAh0MOzIEVgw0UcAvxLT59hCHyaNcFPAXQsE6
 oVb0H6EX1QhP6j645nHtTq8dbgXP+a8VCN6KFE+j4mS46h+4wQwmV8hHZh/sUF4X
 bFs4aAkRULndQ3hrgj+GnNwQwEnek9VUkoa+28qOwZdAmRrfQfz3uY8mcvE+k0lh
 fHHu6+7KMOBR0wC288/tdCcejyDmPseFU1aflbxJ7GqOp3Jfth2MK+mmKFJ0FeeQ
 mJtlcLXH7fEdymisoVSBpwYFeN+G394yxLNhqnVP2zt88gDFp42zNz56tT6vOhR7
 t5VjmdpWqQOff9A0U7FCtatM8D7kCVDME+prVztQuQ92ED3GiBuY+NHggHo2GgC6
 tezJRpYLD9OBFIfDVRPYDJ0M4NISCCFzHLYQqUZ/IE9InHS34j4oGfjkPgCuxO5l
 y8caw2tcxazdX+QZ2m2jdf0i1pyexk/pYsPBtZcmwg1vwNzFg4a9E19Uq4+IxJVg
 1LyKQ84QdcSzYE8DKZVaqG4Dg2MQZz8huMV35/H/xXIFhsU983HKLGIyG6Cjtuc/
 aAasn2kGlD4mulEB76aXNO09Mb6F0lQwW6yCzN8g+2RKugsEq3w=
 =gM74
 -----END PGP SIGNATURE-----

Merge tag 'efi-2023-04-rc1-2' of https://source.denx.de/u-boot/custodians/u-boot-efi

Pull request for efi-2023-04-rc1-2

Documentation

* man-pages for source, blkcache, bdinfo
* fix references to distro documentation

UEFI:

* allow clear screen by scrolling
* ensure that file ubootefi.var is created
* fix CapsuleMax variable reporting

Others:

* reduce verbosity of fat_read_file()
2023-01-20 14:23:20 -05:00
Tom Rini
6e7df1d151 global: Finish CONFIG -> CFG migration
At this point, the remaining places where we have a symbol that is
defined as CONFIG_... are in fairly odd locations. While as much dead
code has been removed as possible, some of these locations are simply
less obvious at first. In other cases, this code is used, but was
defined in such a way as to have been missed by earlier checks.  Perform
a rename of all such remaining symbols to be CFG_... rather than
CONFIG_...

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-01-20 12:27:24 -05:00
Tom Rini
8fe042be9a fpga: Migrate CONFIG_MAX_FPGA_DEVICES to Kconfig
This is always defined to 5, so use that as the default.

Cc: Michal Simek <michal.simek@amd.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Michal Simek <michal.simek@amd.com>
2023-01-20 12:27:06 -05:00
Tom Rini
5bbf9c927a dm: ns16550: Restore how we define UART_REG
Prior to commit 9591b63531 ("Convert CONFIG_SYS_NS16550_MEM32 et al to
Kconfig") we had defined CONFIG_SYS_NS16550_REG_SIZE to -1 with
DM_SERIAL such that we would then have a size 0 character array. This
resulted in functionally no padding. The confusion on my part came from
dealing with the constraints around platforms that do not use DM_SERIAL
in SPL/TPL. After Andre Przywara reported that sunxi was broken, I've
re-read the code and comments again and thought on this harder. What we
want I believe is what this patch does now.

If DM_SERIAL is defined for this stage, regardless of
CONFIG_SYS_NS16550_REG_SIZE then we will dynamically handle reg shifts
and 'struct ns16550' needs no padding (which is functionally what
unsigned char foo[0] provides). This is the same case as NS16550_DYNAMIC
and DEBUG_UART. Expand the existing comment here slightly.

Otherwise, we will have CONFIG_SYS_NS16550_REG_SIZE set to a non-zero
value, and handle padding within the struct.

Cc: Simon Glass <sjg@chromium.org>
Cc: Sergei Antonov <saproj@gmail.com>
Cc: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Fixes: 9591b63531 ("Convert CONFIG_SYS_NS16550_MEM32 et al to Kconfig")
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
2023-01-20 12:27:06 -05:00
Tom Rini
a3fda0d30a global: Remove unused CONFIG defines
Remove some CONFIG symbols and related comments, etc, that are unused
within the code itself at this point.

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-01-20 12:27:06 -05:00
Heinrich Schuchardt
de9433550b fs/fat: avoid noisy message fat_read_file()
UEFI applications call file system functions to determine if a file exists.
The return codes are evaluated to show appropriate messages.
U-Boot's file system layer should not interfere with the output.

Rename file_fat_read_at() to fat_read_file() adjusting the parameter
sequence and names and eliminate the old wrapper function.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2023-01-20 16:38:52 +01:00
Tom Rini
53c47c59e6 convert rockchip to use binman
patman fix for checkpatch
 binman optional entries, improved support for ELF symbols
 trace improvements
 minor fdt refactoring
 -----BEGIN PGP SIGNATURE-----
 
 iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAmPIpV4RHHNqZ0BjaHJv
 bWl1bS5vcmcACgkQfxc6PpAIreZuqwgA0UpYQEX6/MegzHSCIx3AMT4rCF1Ytitr
 LS4Cbvj1Q09Rt9jriW7wAV5AobVPwGf2L5SVcnWv2I9+MmypDIXEe8HIrt2fRFu9
 bzn/2GOzXczuXqPFa/CWOUwjvCzTb8Sl9NtRszrP5NvOzuN15x00ZUYaXFO7fgsB
 zZMzOKxemwjdtLaox+x+VIJ95HMDEkYrWTAqTPg74CNVSjRbbLNqNq0zqkHB8SnH
 ubgphtIKYItTeIXcfIa9V4LeQp0ZitkzSfAibX+nIPCMPg9jbG9MrQQ+VvSZDjnM
 y8wa8gFj47Ek+gGNFXMHIpO6tBd83uHRgtf2x+zhcovLELYnZ6fDGw==
 =1K6m
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-18jan23' of https://source.denx.de/u-boot/custodians/u-boot-dm

convert rockchip to use binman
patman fix for checkpatch
binman optional entries, improved support for ELF symbols
trace improvements
minor fdt refactoring
2023-01-19 09:46:57 -05:00
Joost van Zwieten
ace75d642f odroid: limit boot memory to lowmem
In commit 4963f63fe6 ("image: Use gd->ram_base/_size in
env_get_bootm_size()") the size of the available memory for U-Boot to
use when relocating images, and not otherwise constrained, was changed
to include all known memory banks. In the case of this platform however,
all of the memory known to U-Boot is not also part of the Linux kernel
"lowmem" and so we must use CFG_SYS_BOOTMAPSZ to limit where we relocate
images to. We set a conservative limit of 256MB here to mirror the
previous behavior.

Signed-off-by: Joost van Zwieten <joost@diskos.nl>
[trini: Reword the commit messsage]
Signed-off-by: Tom Rini <trini@konsulko.com>
2023-01-18 19:41:16 -05:00
Brandon Maier
4b9b25d943 lib: zstd: update to latest Linux zstd 1.5.2
Update the zstd implementation to match Linux zstd 1.5.2 from commit
2aa14b1ab2.

This was motivated by running into decompression corruption issues when
trying to uncompress files compressed with newer versions of zstd. zstd
users also claim significantly improved decompression times with newer
zstd versions which is a side benefit.

Original zstd code was copied from Linux commit 2aa14b1ab2 which is a
custom-built implementation based on zstd 1.3.1. Linux switched to an
implementation that is a copy of the upstream zstd code in Linux commit
e0c1b49f5b, this results in a large code diff. However this should make
future updates easier along with other benefits[1].

This commit is a straight mirror of the Linux zstd code, except to:
- update a few #include that do not translate cleanly
  - linux/swab.h -> asm/byteorder.h
  - linux/limits.h -> linux/kernel.h
  - linux/module.h -> linux/compat.h
- remove assert() from debug.h so it doesn't conflict with u-boot's
  assert()
- strip out the compressor code as was done in the previous u-boot zstd
- update existing zstd users to the new Linux zstd API
- change the #define for MEM_STATIC to use INLINE_KEYWORD for codesize
- add a new KConfig option that sets zstd build options to minify code
  based on zstd's ZSTD_LIB_MINIFY[2].

These changes were tested by booting a zstd 1.5.2 compressed kernel inside a
FIT. And the squashfs changes by loading a file from zstd compressed squashfs
with sqfsload. buildman was used to compile test other boards and check for
binary bloat, as follows:

> $ buildman -b zstd2 --boards dh_imx6,m53menlo,mvebu_espressobin-88f3720,sandbox,sandbox64,stm32mp15_dhcom_basic,stm32mp15_dhcor_basic,turris_mox,turris_omnia -sS
> Summary of 6 commits for 9 boards (8 threads, 1 job per thread)
> 01: Merge branch '2023-01-10-platform-updates'
>        arm:  w+   m53menlo dh_imx6
> 02: lib: zstd: update to latest Linux zstd 1.5.2
>    aarch64: (for 2/2 boards) all -3186.0 rodata +920.0 text -4106.0
>        arm: (for 5/5 boards) all +1254.4 rodata +940.0 text +314.4
>    sandbox: (for 2/2 boards) all -4452.0 data -16.0 rodata +640.0 text -5076.0

[1] e0c1b49f5b
[2] f302ad8811/lib/libzstd.mk (L31)

Signed-off-by: Brandon Maier <brandon.maier@collins.com>
[trini: Set ret to -EINVAL for the error of "failed to detect
compressed" to fix warning, drop ZSTD_SRCSIZEHINT_MAX for non-Linux host
tool builds]
Signed-off-by: Tom Rini <trini@konsulko.com>
2023-01-18 19:04:17 -05:00
Simon Glass
c662d0b722 fdt: Avoid exporting fdtdec_prepare_fdt()
This function is not used outside this file. Make it static.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-18 11:49:13 -07:00
Tom Rini
5b958dea5c Merge branch '2022-01-16-bootstd-updates'
To quote the author:
So far standard boot lacks a boot menu, although it is possible to create
a rudimentary one using the existing 'bootmenu' command.

Even then, this text-based menu offer only basic functionality and does
not take full advantage of the displays which are common on many devices.

This series provides a 'bootflow menu' command which allows the user to
select from the available bootflows. An attempt is made to show the name
of the available operating systems, by reading more information into the
bootflow. A logo can be read also, where supported, so that this can be
presented to the user when an option is highlighted.

Full use is made of TrueType fonts, if enabled. For cases where only a
serial console is available, it falls back to a simple text-based menu.

All of this is implementing using a new 'expo' construct, a collection of
scenes (like menu screens) which can be navigated by the user to view
information and select options. This is fairly general and should be able
to cope with a wider array of use cases, with less hacking of the menu
code, such as is currently needed for CMD_BOOTEFI_BOOTMGR.

Of course it would be possible to enhance the existing menu rather than
creating a new setup. Instead it seems better to make the existing menu
use expo, if code space permits. It avoids the event-loop problem and
should be more extensible, given its loosely coupled components and use of
IDs instead of pointers. Further motivation is provided in the
documentation.

For now the CLI keypress-decoding code is split out to be used by the new
menu. The key codes defined by menu.h are reused also.

This is of course just a starting point. Some ideas for future work are
included in the documentation.
2023-01-17 08:55:40 -05:00
Simon Glass
e64c29521c bootstd: Support setting a theme for the menu
Allow a theme to be set. For now this is very simple, just a default font
size to use for all elements.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-16 18:26:51 -05:00
Simon Glass
02d929bfb2 bootstd: Support creating a boot menu
Create an expo to handle the boot menu. For now this is quite simple, with
just a header, some menu items and a pointer to show the current one.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-16 18:26:50 -05:00
Simon Glass
87c6f8a488 expo: Add basic implementation
An expo is a way of presenting and collecting information from the
user. It consists of a collection of 'scenes' of which only one is
presented at a time. An expo is typically used to show a boot menu
and allow settings to be changed.

One created, the same expo can be automatically presented in graphical
form using a vidconsole, or in text form on a serial console.

Add an initial implementation of the expo itself. Supports for scenes
and objects is provided later.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-16 18:26:50 -05:00
Simon Glass
9e7ac0b0be menu: Factor out menu-keypress decoding
Move this code into a separate function so that it can be used in the new
VBE menu.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-16 18:26:50 -05:00
Simon Glass
24d8e1b37b bootstd: Allow reading a logo for the OS
Some operating systems provide a logo in bmp format. Read this in if
present so it can be displayed in the menu.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-16 18:26:50 -05:00
Simon Glass
2175e76a51 bootstd: Read the Operating System name for distro/scripts
Add the concept of an OS name to the bootflow. This typically includes the
OS name, version and kernel version.

Implement this for the distro and script bootmeths so that it works with
Armbian and older version of Fedora.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-16 18:26:50 -05:00
Simon Glass
0e38bd848d video: Add font functions to the vidconsole API
Support for fonts currently depends on the type of vidconsole in use. Add
two new methods to enumerate fonts and to set the font.

Fix a few other method comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-16 18:26:50 -05:00
Simon Glass
5abd8bb0f2 video: Fix unchnaged typo
Fix this typo in the header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2023-01-16 18:26:50 -05:00
Simon Glass
30f3333d88 image: Move common image code to image_board and command
We should use the cmd/ directory for commands rather than for common code
used elsewhere in U-Boot. Move the common 'source' code into
image-board.c to achieve this.

The image_source_script() function needs to call run_command_list()  so
seems to belong better in the command library. Move and rename it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-16 18:26:50 -05:00
Simon Glass
858fefd5fc image: Add a function to find a script in an image
Split this functionality out of the 'source' command so it can be used
from another place. For now leave it where it is, but a future patch will
move it out of cmd/

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-16 18:24:24 -05:00
Simon Glass
32bab0eae5 menu: Make use of CLI character processing
Avoid duplicating some of the escape-sequence processing here and use the
CLI function instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-16 14:14:11 -05:00
Simon Glass
d0ca98dbd9 menu: Update bootmenu_loop() to return the code
Use the return value to save having to pass around a pointer. This also
resolves any ambiguity about what *key contains when the function is
called.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-16 14:14:11 -05:00
Simon Glass
5712976b26 menu: Update bootmenu_autoboot_loop() to return the code
Use the return value to save having to pass around a pointer. This also
resolves any ambiguity about what *key contains when the function is
called.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-16 14:14:11 -05:00
Simon Glass
2da4a15e7e menu: Rename KEY_... to BKEY_...
This enum values conflict with linux/input.h so rename them.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-16 14:14:11 -05:00
Simon Glass
ee6c7eb46f bootmenu: Add a few comments
The behaviour of these two functions is completely undocumented. Add some
notes so the poor, suffering dev can figure out what is going on.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-16 14:14:11 -05:00
Simon Glass
b08e9d4b66 cli: Move readline character-processing to a state machine
The current cread_line() function is very long. It handles the escape
processing inline. The menu command does similar processing but at the
character level, so there is some duplication.

Split the character processing into a new function cli_ch_process() which
processes individual characters and returns the resulting input character,
taking account of escape sequences. It requires the caller to set up and
maintain its state.

Update cread_line() to use this new function.

The only intended functional change is that an invalid escape sequence
does not add invalid/control characters into the input buffer, but instead
discards these.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-16 14:14:11 -05:00
Quentin Schulz
c925be73a0 rockchip: add support for PX30 Ringneck SoM on Haikou Devkit
The PX30-µQ7 (Ringneck) is a system-on-module featuring the Rockchip
PX30 in a micro Qseven-compatible form-factor.

PX30-µQ7 features:
        * CPU: quad-core Cortex-A35
        * DRAM: 2GB dual-channel
        * eMMC: onboard eMMC
        * SD/MMC
        * TI DP83825I 10/100Mbps PHY
        * USB:
                * USB2.0 dual role port
                * 3x USB2.0 host via onboard USB2.0 hub
        * Display: MIPI-DSI
        * Camera: MIPI-CSI
        * onboard 2.4GHz WiFi + Bluetooth module
        * Companion Controller: on-board additional microcontroller
	  (STM32 Cortex-M0 or ATtiny):
                * RTC
                * fan controller
                * CAN (only STM32)

The non-U-Boot DTS files are imported from Linux v6.2-rc2.

Cc: Quentin Schulz <foss+uboot@0leil.net>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
2023-01-16 18:01:11 +08:00
Quentin Schulz
6516336eca rockchip: px30: fix CFG_IRAM_BASE
The IRAM on PX30 (or Int_MEM in datasheet) starts at 0xff0e0000 and not
0xff020000 as rightfully stated in the FIXME comment.

Let's fix it so that BROM_BOOTSOURCE_ID_ADDR points to the correct
address for PX30.

Fixes: 46281a76be ("rockchip: add core px30 headers")
Cc: Quentin Schulz <foss+uboot@0leil.net>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
2023-01-16 18:01:11 +08:00
Peter Robinson
5a42fd0258 rockchip: Add initial support for the PINE64 Pinephone Pro
The Pinephone Pro is another device by PINE64. It's closely related
to the Pinebook Pro of which this initial support is derived from.

Specification:
- A variant of the Rockchip RK3399
- A 6 inch 720*1440 DSI display
- Front and rear cameras
- Type-C interface with alt mode display (DP 1.2) and PD charging
- 4GB LPDDR4 RAM
- 128GB eMMC
- mSD card slot
- An AP6255 module for 802.11ac WiFi and Bluetooth 5
- Quectel EG25-G 4G/LTE modem

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-01-16 18:01:11 +08:00
Jagan Teki
b8f1ca9540 board: rockchip: Add Edgeble Neu2 IO Board
Neural Compute Module 2(Neu2) IO board is an industrial form factor
IO board from Edgeble AI.

General features:
- microSD slot
- MIPI DSI connector
- 2x USB Host
- 1x USB OTG
- Ethernet
- mini PCIe
- Onboard PoE
- RS485, RS232, CAN
- Micro Phone array
- Speaker
- RTC battery slot
- 40-pin expansion

Neu2 needs to mount on top of this IO board in order to create complete
Edgeble Neural Compute Module 2(Neu2) IO platform.

Add support for it.

Signed-off-by: Jagan Teki <jagan@edgeble.ai>
2023-01-16 18:01:11 +08:00
Jagan Teki
ffb191e458 arm: rockchip: Add RV1126 arch core support
Rockchip RV1126 is a high-performance vision processor SoC
for IPC/CVR, especially for AI related application.

Add arch core support for it.

Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Change-Id: I22fde40ec375e3c6aba39808abf252edc45d4b04
2023-01-16 18:01:11 +08:00
Jagan Teki
766e7e04bc dt-bindings: power: Add power-domain header for rv1126
Add power-domain header for RV1126 SoC from description in TRM.

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-01-16 18:01:11 +08:00
Jagan Teki
4ebc5e36fb dt-bindings: clk: Add dt-binding header for RV1126
Add the dt-bindings header for the Rockchip RV1126, that gets shared
between the clock controller and the clock references in the dts.

Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-01-16 18:01:11 +08:00
John Keeping
93a6e60e49 rc4: mark key as const
Key data is never written so the parameter can be const, which allows
putting fixed keys in .rodata.

Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-01-16 18:01:10 +08:00
Heinrich Schuchardt
6c39d0ef1e doc: fix description of u16_strcasecmp()
Remove non-existent parameter 'n' from function description.

Fixes: 7a9b366cd9 ("lib: add function u16_strcasecmp()")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-01-13 09:09:07 +01:00
Marek Vasut
48b3ecbedf gpio: Get rid of gpio_hog_probe_all()
The gpio_hog_probe_all() functionality can be perfectly well replaced by
DM_FLAG_PROBE_AFTER_BIND DM flag, which would trigger .probe() callback
of each GPIO hog driver instance after .bind() and thus configure the
hogged GPIO accordingly.

Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
2023-01-12 14:06:16 -05:00
Marek Vasut
d0ba0ca45a distro_bootcmd: Set distro_bootpart_uuid for block devices
The assignment of block device nodes in Linux is not deterministic by
default, i.e. a newly added eMMC controller or other block device can
change the assignment of /dev/mmcblkN (or other block device node like
e.g. /dev/sdXy) and prevent the system from picking the correct block
device for root filesystem in case the root filesystem is specified on
kernel command line using 'root=/dev/mmcblkNpM' (or 'root=/dev/sdXy'
etc.).

One way out is to derive PARTUUID in U-Boot, which is unique identifier
of a partition, and pass that as root=PARTUUID=<partuuid> to Linux via
kernel command line. Linux would then find the partition using PARTUUID,
no matter on which block device the partition resides and which node was
assigned to that block device.

Derive the PARTUUID before scanning for extlinux presence and assign it
into distro_bootpart_uuid environment variable, which can then be used
in extlinux.conf kernel command line specifier.

Note that it is not possible to do this in scan_dev_for_extlinux script
because this script is called from scan_dev_for_boot script, which is
called for both block devices as well as UBI volumes, and we can not
derive PARTUUID for UBI volumes.

Signed-off-by: Marek Vasut <marex@denx.de>
2023-01-12 14:06:16 -05:00
Sean Anderson
0998a20cfc misc: fs_loader: Add function to get the chosen loader
The fs_loader device is used to pull in settings via the chosen node.
However, there was no library function for this, so arria10 was doing it
explicitly. This function subsumes that, and uses ofnode_get_chosen_node
instead of navigating the device tree directly. Because fs_loader pulls
its config from the environment by default, it's fine to create a device
with nothing backing it at all. Doing this allows enabling
CONFIG_FS_LOADER without needing to modify the device tree.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-01-12 14:06:15 -05:00
Marek Vasut
f08dcd9fd0 test: cmd: exit: Add unit test for exit and partly run commands
Add a test which validates that exit from environment script works as
expected, including return value propagation and clipping to positive
integers.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Marek Vasut <marex@denx.de>
2023-01-11 15:02:24 -05:00
Sean Anderson
f3d914cfdd fastboot: Add OEM run command
This adds the UUU UCmd functionality as an OEM command. While the
fastboot tool allows sending arbitrary commands as long as they are
prefixed with "oem". This allows running generic U-Boot commands over
fastboot without UUU, which is especially useful when not using USB.
This is really the route we should have gone in the first place when
adding these commands.

While we're here, clean up the UUU Kconfig a bit.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2023-01-11 15:02:24 -05:00
Patrick Delaunay
d037990046 fastboot: remove #ifdef CONFIG when it is possible
Much of the fastboot code predates the introduction of Kconfig and
has quite a few #ifdefs in it which is unnecessary now that we can use
IS_ENABLED() et al.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Sean Anderson <sean.anderson@seco.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> # on vim3l
2023-01-11 15:02:24 -05:00
Dzmitry Sankouski
40c69cc922 board: starqltechn: enable serial console
It was temporary disabled due to problem with boot.
Issue was fixed in
commit f5ed6c9ccf ("uart: sdm845: Fix debug UART pinmux")

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
2023-01-10 15:39:07 -05:00
Bryan Brattlof
221ae89bc8 configs: am62a: use kernel fitImage when using secure bootflow
In order to maintain the chain of trust, each stage of the boot process
will first authenticate each binary it loads before continuing. To
extend this to the kernal and its dtbs we can package the kernal and
its dtbs into another fitImage for Uboot to authenticate and extend the
chain of trust all the way to the kernel.

When 'boot_fit' is set, indicating we're using the secure bootflow, look
for and authenticate the kernel's fitImage.

Signed-off-by: Judith Mendez <jm@ti.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
2023-01-10 15:39:07 -05:00
Bryan Brattlof
e625bfe5ad configs: am62a: convert bootcmd to distro_bootcmd
We're currently using CONFIG_BOOTCOMMAND to run custom boot scripts to
jump into linux. While this works, let's begin the transition to more
distribution friendly jumps to linux by enabling distro_bootcmd.

Convert the custom bootcmd to a distro_bootcmd

Signed-off-by: Judith Mendez <jm@ti.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
2023-01-10 15:39:07 -05:00
Martyn Welch
83f5195e32 configs: Enable distroboot on am625
TI boards use a custom (though faily common to TI boards) mechanism for
booting Linux. We would like to use the "distroboot" approach.

Enable distroboot as a further option to use for booting on am625 should
the existing options fail.

Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
2023-01-10 15:39:07 -05:00
Viacheslav Bocharov
559871524a board: amlogic: jethub j100: add rescue boot from microSD
The new JetHub D1+ has a microSD slot. Add rescue boot from microSD

Signed-off-by: Viacheslav Bocharov <adeep@lexina.in>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20221222093358.204520-1-adeep@lexina.in
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-10 15:25:39 +01:00
Tom Rini
7b84c973b9 ns16650: Correct CONFIG_SYS_NS16550_MEM32 platforms
There are currently no platform that are both CONFIG_SYS_NS16550_MEM32
and not (per how the logic was prior to being broken in 0478dac62a
("kbuild: Remove uncmd_spl logic")) enabled in CONFIG_DM_SERIAL. We drop
this line out now so that platforms which do use
CONFIG_SYS_NS16550_MEM32 and depending on stage may or may not have
DM_SERIAL set.

Fixes: 0478dac62a ("kbuild: Remove uncmd_spl logic")
Reported-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Tested-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> #on Ringneck PX30, Puma RK3399
2023-01-09 11:30:49 -05:00
Tom Rini
cebdfc22da Merge branch 'next'
Signed-off-by: Tom Rini <trini@konsulko.com>
2023-01-09 11:30:08 -05:00
Tom Rini
fe33066d24 Pull request for u-boot-nand-20230108
- rawnand: omap_gpmc: driver model support
 -----BEGIN PGP SIGNATURE-----
 
 iQJYBAABCgBCFiEE6GOTDNYiFygVXvMmQBtB6IWRjvEFAmO6pUskHGRhcmlvLmJp
 bmFjY2hpQGFtYXJ1bGFzb2x1dGlvbnMuY29tAAoJEEAbQeiFkY7xo+kQAIRCr9c5
 DPOa+yFSFnSrEj6Ci+Csx0+VFef+pzUU3phu5T8HG8bCkKtMmPopau37coFhzty/
 87yQtVJoq5tMWdle8Lwg9SStYTjt2c9Vg6nZvNFaLDWkZm2zLJpgOB6KM+AIEvpG
 PLJ2nVYqwoaZbW3o1eHPescKl3A7vkMuUxIZ/3NJtKOezuqhR42nHyNDaGLMbI2o
 fvm17vc6gh07+ekR06frVOmUdxYbNcfEjCPLgf2fAqkAuBw17TB2akpDuTSYSck5
 QcIZqJeKwCJjCKEzOlXZHktiX3E1CohOcEcPBKlWPvNORokc/ghcHFvvT846FFqE
 VEZb0P/4lkvSCVBCwTbgnKtN1O8mN/lnHVMubQXWyP5ZK7PPn7BzyzOZfCm+Emdm
 41B2H2+3+IRhTY9uYPyPXnyTQ/pDUZ2i7EXIguUAWOaq6GE8w9ICty1c7pxnCG5+
 mm/4nhMrbQzQ7y4Snp1jZTcdvFczuBNFIEsSvOyHagXVCRHJi1/YT4L4t1mvUX5J
 VPnidkrdQFIJpfJadEk/D3E43XXyqKtFpHy1yn1cqqiDd/TIGUmcf9oAkT6wuUZf
 DoQjdRKJnr6nyPVfWF/cQ4c4qcDXvA5TIKztxrb/whaff+2I/vXW2QnV2YX3zyxt
 Ry6YvBOH0xYTWNmQ7uFecjkpeKhb4FrKuUUf
 =Agfn
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-nand-20230108' of https://source.denx.de/u-boot/custodians/u-boot-nand-flash into next

Pull request for u-boot-nand-20230108

- rawnand: omap_gpmc: driver model support
2023-01-08 13:12:42 -05:00
Marek Vasut
53e5b584e6 distro_bootcmd: Fix copy-paste error
The "SCRIPT FAILED" string is copied from scan_dev_for_scripts script,
update it so it prints "EXTLINUX FAILED" instead in scan_dev_for_extlinux
script.

Signed-off-by: Marek Vasut <marex@denx.de>
2023-01-08 08:45:17 -05:00
Roger Quadros
7363cf0581 mtd: rawnand: omap_elm: u-boot driver model support
Support u-boot driver model. We still retain
support legacy way of doing things if ELM_BASE
is defined in <asm/arch/hardware.h>

We could completely get rid of that if all
platforms defining ELM_BASE get rid of that definition
and enable CONFIG_SYS_NAND_SELF_INIT and are verified
to work.

Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Link: https://lore.kernel.org/all/20221220102203.52398-9-rogerq@kernel.org
Link: https://lore.kernel.org/all/CABGWkvrvKiVA_yaDnHJcHEKwc+pEuLdz=i6HQEY0oJQvohCUsw@mail.gmail.com
2023-01-08 10:38:50 +01:00
Heinrich Schuchardt
eff4440195 efi_loader: carve out efi_get_memory_map_alloc()
Carve out code from efidebug command used to read the memory map.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-01-06 22:27:30 +01:00
Heinrich Schuchardt
f4af97cdb4 vexpress: adjust loadaddr
On the vexpress_ca9x4 $loadaddr points to a memory area used by the EFI
sub-system. Use the same value as $kernel_addr_r which is safe.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-01-06 22:27:30 +01:00
Tom Rini
b82f12b642 First set of u-boot-at91 features for the 2023.04 cycle
-----BEGIN PGP SIGNATURE-----
 
 iQFQBAABCgA6FiEEqxhEmNJ6d7ZdeFLIHrMeAg6sL8gFAmO2mnEcHGV1Z2VuLmhy
 aXN0ZXZAbWljcm9jaGlwLmNvbQAKCRAesx4CDqwvyBAOB/4y7e9y0jdKSWDwMdZj
 enXK/U/GREFyuiSdadil0aJl9WfayjwZkh7uHSTj4pi9ApNivfoqsL7WZYpJxhRD
 WlpNhs3TZ70i8CgKUosdzcpquAQZUZhg6iV5DCObrK6yNJRGOXLIwMOd+vw/Xz6/
 YTGqzivEDMBuH/9HLuC0m+26PEpff8nenNEjC2k8ssG26ojLz7oCQh2HoHcSgNRc
 HkEYlFJ/Le8kM8Ak2F3ebmsfgMTnFrRVwV1BsZa5vO0BrMYgJCORsl7Cnfcw6/2N
 LEHG7kwlSorJeETn/gkLiZ+NyqzU+oFH0jGRZ5Ciqg1qcCO3k9yBMgWQzd7nTL6C
 5oZA
 =Ocdd
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-at91-2023.04-a' of https://source.denx.de/u-boot/custodians/u-boot-at91 into next

First set of u-boot-at91 features for the 2023.04 cycle:

This feature set includes the new DM-based NAND flash driver (old non-DM
driver is still kept for backwards compatibility), and the move to DM
NAND flash driver for sam9x60ek board. Feature set also includes
devicetree alignment for sama7g5 with Linux, devicetree alignment on USB
with Linux for all boards (sama5, sam9x60), chip id for sama7g5, minor
configs and tweaks.
2023-01-06 11:53:26 -05:00
Sergiu Moga
ee25ed5899 dt-bindings: clk: at91: Define additional UTMI related clocks
Add definitions for an additional main UTMI clock as well as its
respective subclocks.

Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
2023-01-05 10:04:57 +02:00
Sergiu Moga
7b88887ba7 dt-bindings: reset: add sama7g5 definitions
Upstream linux commit 5994f58977e0.

Add reset bindings for SAMA7G5. At the moment only USB PHYs are
included.

The three reset USB phy's have their ID's mapped from 4 to 6. There are
no USB phy's with ID's numbered from 0 to 3.

Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
2023-01-05 10:04:57 +02:00
Heinrich Schuchardt
7a9b366cd9 lib: add function u16_strcasecmp()
Provide a function for comparing UTF-16 strings in a case insensitive
manner.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-01-04 13:17:42 +01:00
Heinrich Schuchardt
673a92c5d2 efi_loader: defines for PE-COFF section flags
Provide constants for the section flags used by binaries.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2023-01-04 13:17:42 +01:00
Marek Vasut
fbc595b412 doc: Fix eth_env_[gs]et_enetaddr() return value
Per env/common.c, eth_env_get_enetaddr() returns the same return
values as is_valid_ethaddr(), i.e. true if valid, false otherwise.
Per env/common.c, eth_env_set_enetaddr() may return -EEXIST is the
ethaddr is already set. Fix both.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-01-04 13:17:42 +01:00
Stefan Bosch
28663622cf arm: s5p4418: dm_serial: remove old code / add DEBUG_UART
Remove init of UART-clock and UART-reset in arch_cpu_init(). Add DEBUG_UART
to s5p4418_nanopi2_defconfig.

Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
2023-01-02 16:06:08 -05:00
Dai Okamura
872413bb0a arm: uniphier: use DM_TIMER of arm a9 global timer
All uniphier v7 SoCs have cortex-a9 and use cortex-a9 global timer
in a simple implementation. Now DM_TIMER of it is available
on 35751c7f3f ("timer: sti: convert sti-timer to arm a9 global timer"),
so let's switch to it.

The old driver reads the lower 32bits of counter field
and sets the prescaler as 50 with PERIPHCLK(=50MHz),
so the global timer works as a 32-bit 1MHz timer.

The DM_TIMER uses the whole 64bits with no prescaler,
so the global timer works as a 64-bit PERIPHCLK timer.

CONFIG_SYS_HZ_CLOCK is set as the default PERIPHCLK frequency,
if there is no 'clocks' property in devicetree.

Signed-off-by: Dai Okamura <okamura.dai@socionext.com>
2023-01-02 16:01:39 -05:00
Sean Anderson
bcc85b96b5 cmd: source: Support specifying config name
As discussed previously [1,2], the source command is not safe to use with
verified boot unless there is a key with required = "images" (which has its
own problems). This is because if such a key is absent, signatures are
verified but not required. It is assumed that configuration nodes will
provide the signature. Because the source command does not use
configurations to determine the image to source, effectively no
verification takes place.

To address this, allow specifying configuration nodes. We use the same
syntax as the bootm command (helpfully provided for us by fit_parse_conf).
By default, we first try the default config and then the default image. To
force using a config, # must be present in the command (e.g. `source
$loadaddr#my-conf`). For convenience, the config may be omitted, just like
the address may be (e.g. `source \#`). This also works for images
(`source :` behaves exactly like `source` currently does).

[1] https://lore.kernel.org/u-boot/7d711133-d513-5bcb-52f2-a9dbaa9eeded@prevas.dk/
[2] https://lore.kernel.org/u-boot/042dcb34-f85f-351e-1b0e-513f89005fdd@gmail.com/

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-31 13:35:19 -05:00
Sean Anderson
b5fd7b4a31 image: Add fallback for fit_config_verify
Add a fallback for this function so it can be used without regard to
whether FIT_SIGNATURE is enabled or not.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-31 13:35:19 -05:00
Heinrich Schuchardt
eff6b7157c efi_loader: set UEFI specification version to 2.10
Claim to implement UEFI 2.10 setting EFI_SPECIFICATION_VERSION accordingly.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2022-12-29 10:51:50 +01:00
Tom Rini
1e01950333 post: Move CONFIG_SYS_POST to CFG_SYS_POST
Migrate the rest of the CONFIG_SYS_POST macros over to CFG_SYS_POST
namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 13:01:13 -05:00
Tom Rini
0478dac62a kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.

The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:15:13 -05:00
Tom Rini
f5dd0c5e19 configs: Remove unused or redundant CONFIG symbols
A number of CONFIG symbols have crept in that are never referenced in
code, so drop them here. Further, we have two symbols being enabled
in headers while already enabled correctly in Kconfig, so these lines
can also be removed.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:15:13 -05:00
Tom Rini
e1d6c16d80 librem5: Rename CONFIG_POWER_BD71837 symbols
Rename the CONFIG_POWER_BD71837_I2C_* symbols to not have the CONFIG
prefix and be local to the file they are used in.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:15:13 -05:00
Tom Rini
92a5c89998 global: Migrate CONFIG_X86_REFCODE_RUN_ADDR to CFG
Perform a simple rename of CONFIG_X86_REFCODE_RUN_ADDR to CFG_X86_REFCODE_RUN_ADDR

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:15:13 -05:00
Tom Rini
d4143373f1 global: Migrate CONFIG_X86_REFCODE_ADDR to CFG
Perform a simple rename of CONFIG_X86_REFCODE_ADDR to CFG_X86_REFCODE_ADDR

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:15:13 -05:00
Tom Rini
fa2fd534b5 global: Migrate CONFIG_X86_MRC_ADDR to CFG
Perform a simple rename of CONFIG_X86_MRC_ADDR to CFG_X86_MRC_ADDR

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:15:13 -05:00
Tom Rini
bb34410509 global: Migrate CONFIG_WATCHDOG_PRESC et al to CFG
Perform simple renames of:
   CONFIG_WATCHDOG_PRESC to CFG_WATCHDOG_PRESC
   CONFIG_WATCHDOG_RC to CFG_WATCHDOG_RC

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:15:12 -05:00
Tom Rini
438654c87c global: Migrate CONFIG_VSC7385_IMAGE et al to CFG
Perform simple renames of:
   CONFIG_VSC7385_IMAGE to CFG_VSC7385_IMAGE
   CONFIG_VSC7385_IMAGE_SIZE to CFG_VSC7385_IMAGE_SIZE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:15:12 -05:00
Tom Rini
1d0eaf2f32 global: Migrate CONFIG_USB_ISP1301_I2C_ADDR to CFG
Perform a simple rename of CONFIG_USB_ISP1301_I2C_ADDR to CFG_USB_ISP1301_I2C_ADDR

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:15:12 -05:00
Tom Rini
61693acbce global: Migrate CONFIG_USART_ID to CFG
Perform a simple rename of CONFIG_USART_ID to CFG_USART_ID

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:15:12 -05:00
Tom Rini
805482d187 global: Migrate CONFIG_USART_BASE to CFG
Perform a simple rename of CONFIG_USART_BASE to CFG_USART_BASE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:15:12 -05:00
Tom Rini
39d4e7b0b0 global: Migrate CONFIG_TESTPIN_REG to CFG
Perform a simple rename of CONFIG_TESTPIN_REG to CFG_TESTPIN_REG

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:15:12 -05:00
Tom Rini
77cfb3d345 global: Migrate CONFIG_TESTPIN_MASK to CFG
Perform a simple rename of CONFIG_TESTPIN_MASK to CFG_TESTPIN_MASK

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:15:12 -05:00
Tom Rini
e660e972c4 global: Migrate CONFIG_TEGRA_BOARD_STRING to CFG
Perform a simple rename of CONFIG_TEGRA_BOARD_STRING to CFG_TEGRA_BOARD_STRING

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:15:12 -05:00
Tom Rini
d8964b3e1d global: Migrate CONFIG_SYS_I2C_DIRECT_BUS to CFG
Perform a simple rename of CONFIG_SYS_I2C_DIRECT_BUS to CFG_SYS_I2C_DIRECT_BUS

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:15:12 -05:00
Tom Rini
e02e5e5188 global: Migrate CONFIG_STD_DEVICES_SETTINGS to CFG
Perform a simple rename of CONFIG_STD_DEVICES_SETTINGS to CFG_STD_DEVICES_SETTINGS

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:15:12 -05:00
Tom Rini
6786ce1ce1 global: Migrate CONFIG_STACKBASE to CFG
Perform a simple rename of CONFIG_STACKBASE to CFG_STACKBASE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:15:12 -05:00
Tom Rini
3e204427c8 global: Migrate CONFIG_SMP_PEN_ADDR to CFG
Perform a simple rename of CONFIG_SMP_PEN_ADDR to CFG_SMP_PEN_ADDR

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:15:12 -05:00
Tom Rini
59f3a09a6c global: Migrate CONFIG_SLIC to CFG
Perform a simple rename of CONFIG_SLIC to CFG_SLIC

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:15:12 -05:00
Tom Rini
97148cb614 global: Migrate CONFIG_SH_ETHER_USE_PORT to CFG
Perform a simple rename of CONFIG_SH_ETHER_USE_PORT to CFG_SH_ETHER_USE_PORT

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:15:12 -05:00
Tom Rini
85b5511708 global: Migrate CONFIG_SH_ETHER_PHY_MODE to CFG
Perform a simple rename of CONFIG_SH_ETHER_PHY_MODE to CFG_SH_ETHER_PHY_MODE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:15:12 -05:00
Tom Rini
7c480bab14 global: Migrate CONFIG_SH_ETHER_PHY_ADDR to CFG
Perform a simple rename of CONFIG_SH_ETHER_PHY_ADDR to CFG_SH_ETHER_PHY_ADDR

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:15:12 -05:00
Tom Rini
ff53ecc387 global: Migrate CONFIG_SH_ETHER_CACHE_WRITEBACK to CFG
Perform a simple rename of CONFIG_SH_ETHER_CACHE_WRITEBACK to CFG_SH_ETHER_CACHE_WRITEBACK

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:15:12 -05:00
Tom Rini
c253cea724 global: Migrate CONFIG_SH_ETHER_CACHE_INVALIDATE to CFG
Perform a simple rename of CONFIG_SH_ETHER_CACHE_INVALIDATE to CFG_SH_ETHER_CACHE_INVALIDATE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:15:12 -05:00
Tom Rini
24513c3ac8 global: Migrate CONFIG_SH_ETHER_ALIGNE_SIZE to CFG
Perform a simple rename of CONFIG_SH_ETHER_ALIGNE_SIZE to CFG_SH_ETHER_ALIGNE_SIZE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:15:12 -05:00
Tom Rini
ddc4187033 global: Migrate CONFIG_SET_DFU_ALT_BUF_LEN to CFG
Perform a simple rename of CONFIG_SET_DFU_ALT_BUF_LEN to CFG_SET_DFU_ALT_BUF_LEN

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:15:12 -05:00
Tom Rini
3cdd6302a5 global: Migrate CONFIG_SC_TIMER_CLK to CFG
Perform a simple rename of CONFIG_SC_TIMER_CLK to CFG_SC_TIMER_CLK

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:15:12 -05:00
Tom Rini
77d0870c29 global: Migrate CONFIG_SCSI_DEV_LIST to CFG
Perform a simple rename of CONFIG_SCSI_DEV_LIST to CFG_SCSI_DEV_LIST

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:15:11 -05:00
Tom Rini
dbfaeecf59 global: Migrate CONFIG_SCIF_A to CFG
Perform a simple rename of CONFIG_SCIF_A to CFG_SCIF_A

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:15:11 -05:00
Tom Rini
3db78c830f global: Migrate CONFIG_RESET_VECTOR_ADDRESS to CFG
Perform a simple rename of CONFIG_RESET_VECTOR_ADDRESS to CFG_RESET_VECTOR_ADDRESS

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:15:11 -05:00
Tom Rini
d4c8dd1e6f global: Migrate CONFIG_RAMDISK_ADDR to CFG
Perform a simple rename of CONFIG_RAMDISK_ADDR to CFG_RAMDISK_ADDR

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:15:11 -05:00
Tom Rini
7c5c137c41 global: Migrate CONFIG_PRAM to CFG
Perform a simple rename of CONFIG_PRAM to CFG_PRAM

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:15:11 -05:00
Tom Rini
193b3fe175 global: Migrate CONFIG_POWER_PFUZE3000_I2C_ADDR to CFG
Perform a simple rename of CONFIG_POWER_PFUZE3000_I2C_ADDR to CFG_POWER_PFUZE3000_I2C_ADDR

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:52 -05:00
Tom Rini
aa3efb6c64 global: Migrate CONFIG_POWER_PFUZE100_I2C_ADDR to CFG
Perform a simple rename of CONFIG_POWER_PFUZE100_I2C_ADDR to CFG_POWER_PFUZE100_I2C_ADDR

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:52 -05:00
Tom Rini
6d38c69e83 global: Migrate CONFIG_POWER_LTC3676_I2C_ADDR to CFG
Perform a simple rename of CONFIG_POWER_LTC3676_I2C_ADDR to CFG_POWER_LTC3676_I2C_ADDR

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:52 -05:00
Tom Rini
2adbb29747 global: Migrate CONFIG_POSTBOOTMENU to CFG
Perform a simple rename of CONFIG_POSTBOOTMENU to CFG_POSTBOOTMENU

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:52 -05:00
Tom Rini
b861574bd9 global: Migrate CONFIG_PL01x_PORTS to CFG
Perform a simple rename of CONFIG_PL01x_PORTS to CFG_PL01x_PORTS

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:51 -05:00
Tom Rini
f410d0ac8a global: Migrate CONFIG_PL011_CLOCK to CFG
Perform a simple rename of CONFIG_PL011_CLOCK to CFG_PL011_CLOCK

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:51 -05:00
Tom Rini
830fd095a3 global: Migrate CONFIG_PHY_IRAM_BASE to CFG
Perform a simple rename of CONFIG_PHY_IRAM_BASE to CFG_PHY_IRAM_BASE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:51 -05:00
Tom Rini
52d596eabb global: Migrate CONFIG_PHY_ID to CFG
Perform a simple rename of CONFIG_PHY_ID to CFG_PHY_ID

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:51 -05:00
Tom Rini
52139620be global: Migrate CONFIG_PCIE_IMX_POWER_GPIO to CFG
Perform a simple rename of CONFIG_PCIE_IMX_POWER_GPIO to CFG_PCIE_IMX_POWER_GPIO

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:51 -05:00
Tom Rini
7906f91789 global: Migrate CONFIG_PCIE_IMX_PERST_GPIO to CFG
Perform a simple rename of CONFIG_PCIE_IMX_PERST_GPIO to CFG_PCIE_IMX_PERST_GPIO

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:51 -05:00
Tom Rini
a2c164cbb4 global: Migrate CONFIG_OTHBOOTARGS to CFG
Perform a simple rename of CONFIG_OTHBOOTARGS to CFG_OTHBOOTARGS

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:51 -05:00
Tom Rini
1c3ba55798 global: Migrate CONFIG_ODROID_REV_AIN to CFG
Perform a simple rename of CONFIG_ODROID_REV_AIN to CFG_ODROID_REV_AIN

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:51 -05:00
Tom Rini
dd11fdc31f global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG
Perform simple renames of:
   CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS
   CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT
   CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:51 -05:00
Tom Rini
4db386655a global: Migrate CONFIG_MXC_UART_BASE to CFG
Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:51 -05:00
Tom Rini
d1c723895b global: Migrate CONFIG_MXC_NAND_REGS_BASE to CFG
Perform a simple rename of CONFIG_MXC_NAND_REGS_BASE to CFG_MXC_NAND_REGS_BASE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:51 -05:00
Tom Rini
55eef1d629 global: Migrate CONFIG_MXC_NAND_IP_REGS_BASE to CFG
Perform a simple rename of CONFIG_MXC_NAND_IP_REGS_BASE to CFG_MXC_NAND_IP_REGS_BASE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:51 -05:00
Tom Rini
8f52920a4a global: Migrate CONFIG_MFG_ENV_SETTINGS to CFG
Perform a simple rename of CONFIG_MFG_ENV_SETTINGS to CFG_MFG_ENV_SETTINGS

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:51 -05:00
Tom Rini
8a897c4f97 global: Migrate CONFIG_MAX_RAM_BANK_SIZE to CFG
Perform a simple rename of CONFIG_MAX_RAM_BANK_SIZE to CFG_MAX_RAM_BANK_SIZE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:51 -05:00
Tom Rini
1d457dbb91 global: Migrate CONFIG_MAX_MEM_MAPPED to CFG
Perform a simple rename of CONFIG_MAX_MEM_MAPPED to CFG_MAX_MEM_MAPPED

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:51 -05:00
Tom Rini
dd5b58c491 global: Migrate CONFIG_MALLOC_F_ADDR to CFG
Perform a simple rename of CONFIG_MALLOC_F_ADDR to CFG_MALLOC_F_ADDR

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:51 -05:00
Tom Rini
bd79d3d616 global: Migrate CONFIG_LPC32XX_NAND_SLC_WWIDTH to CFG
Perform a simple rename of CONFIG_LPC32XX_NAND_SLC_WWIDTH to CFG_LPC32XX_NAND_SLC_WWIDTH

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:51 -05:00
Tom Rini
308ed80839 global: Migrate CONFIG_LPC32XX_NAND_SLC_WSETUP to CFG
Perform a simple rename of CONFIG_LPC32XX_NAND_SLC_WSETUP to CFG_LPC32XX_NAND_SLC_WSETUP

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:51 -05:00
Tom Rini
b0c548273e global: Migrate CONFIG_LPC32XX_NAND_SLC_WHOLD to CFG
Perform a simple rename of CONFIG_LPC32XX_NAND_SLC_WHOLD to CFG_LPC32XX_NAND_SLC_WHOLD

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:51 -05:00
Tom Rini
fa32dc7d15 global: Migrate CONFIG_LPC32XX_NAND_SLC_WDR_CLKS to CFG
Perform a simple rename of CONFIG_LPC32XX_NAND_SLC_WDR_CLKS to CFG_LPC32XX_NAND_SLC_WDR_CLKS

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:51 -05:00
Tom Rini
fa0e72a34e global: Migrate CONFIG_LPC32XX_NAND_SLC_RWIDTH to CFG
Perform a simple rename of CONFIG_LPC32XX_NAND_SLC_RWIDTH to CFG_LPC32XX_NAND_SLC_RWIDTH

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:50 -05:00
Tom Rini
416ef8c7c6 global: Migrate CONFIG_LPC32XX_NAND_SLC_RSETUP to CFG
Perform a simple rename of CONFIG_LPC32XX_NAND_SLC_RSETUP to CFG_LPC32XX_NAND_SLC_RSETUP

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:50 -05:00
Tom Rini
bba52ab080 global: Migrate CONFIG_LPC32XX_NAND_SLC_RHOLD to CFG
Perform a simple rename of CONFIG_LPC32XX_NAND_SLC_RHOLD to CFG_LPC32XX_NAND_SLC_RHOLD

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:50 -05:00
Tom Rini
c102eb5ca7 global: Migrate CONFIG_LPC32XX_NAND_SLC_RDR_CLKS to CFG
Perform a simple rename of CONFIG_LPC32XX_NAND_SLC_RDR_CLKS to CFG_LPC32XX_NAND_SLC_RDR_CLKS

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:50 -05:00
Tom Rini
39fa17718f global: Migrate CONFIG_LPC32XX_NAND_MLC_WR_LOW to CFG
Perform a simple rename of CONFIG_LPC32XX_NAND_MLC_WR_LOW to CFG_LPC32XX_NAND_MLC_WR_LOW

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:50 -05:00
Tom Rini
196690dfda global: Migrate CONFIG_LPC32XX_NAND_MLC_WR_HIGH to CFG
Perform a simple rename of CONFIG_LPC32XX_NAND_MLC_WR_HIGH to CFG_LPC32XX_NAND_MLC_WR_HIGH

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:50 -05:00
Tom Rini
259ec2ce11 global: Migrate CONFIG_LPC32XX_NAND_MLC_TCEA_DELAY to CFG
Perform a simple rename of CONFIG_LPC32XX_NAND_MLC_TCEA_DELAY to CFG_LPC32XX_NAND_MLC_TCEA_DELAY

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:50 -05:00
Tom Rini
3c35c036ad global: Migrate CONFIG_LPC32XX_NAND_MLC_RD_LOW to CFG
Perform a simple rename of CONFIG_LPC32XX_NAND_MLC_RD_LOW to CFG_LPC32XX_NAND_MLC_RD_LOW

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:50 -05:00
Tom Rini
ab8c6e370c global: Migrate CONFIG_LPC32XX_NAND_MLC_RD_HIGH to CFG
Perform a simple rename of CONFIG_LPC32XX_NAND_MLC_RD_HIGH to CFG_LPC32XX_NAND_MLC_RD_HIGH

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:50 -05:00
Tom Rini
ea93286e5f global: Migrate CONFIG_LPC32XX_NAND_MLC_NAND_TA to CFG
Perform a simple rename of CONFIG_LPC32XX_NAND_MLC_NAND_TA to CFG_LPC32XX_NAND_MLC_NAND_TA

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:50 -05:00
Tom Rini
dff9de5c2c global: Migrate CONFIG_LPC32XX_NAND_MLC_BUSY_DELAY to CFG
Perform a simple rename of CONFIG_LPC32XX_NAND_MLC_BUSY_DELAY to CFG_LPC32XX_NAND_MLC_BUSY_DELAY

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:50 -05:00
Tom Rini
8000ac874c global: Migrate CONFIG_LOWPOWER_FLAG to CFG
Perform a simple rename of CONFIG_LOWPOWER_FLAG to CFG_LOWPOWER_FLAG

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:50 -05:00
Tom Rini
77db07ce1c global: Migrate CONFIG_LOWPOWER_ADDR to CFG
Perform a simple rename of CONFIG_LOWPOWER_ADDR to CFG_LOWPOWER_ADDR

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:50 -05:00
Tom Rini
1cd60b3cc0 global: Migrate CONFIG_LEGACY_BOOTCMD_ENV to CFG
Perform a simple rename of CONFIG_LEGACY_BOOTCMD_ENV to CFG_LEGACY_BOOTCMD_ENV

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:50 -05:00
Tom Rini
e9f508cf01 global: Migrate CONFIG_KSNET_SERDES_SGMII_BASE to CFG
Perform a simple rename of CONFIG_KSNET_SERDES_SGMII_BASE to CFG_KSNET_SERDES_SGMII_BASE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:50 -05:00
Tom Rini
81d239aede global: Migrate CONFIG_KSNET_SERDES_SGMII2_BASE to CFG
Perform a simple rename of CONFIG_KSNET_SERDES_SGMII2_BASE to CFG_KSNET_SERDES_SGMII2_BASE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:50 -05:00
Tom Rini
d036606142 global: Migrate CONFIG_KSNET_SERDES_LANES_PER_SGMII to CFG
Perform a simple rename of CONFIG_KSNET_SERDES_LANES_PER_SGMII to CFG_KSNET_SERDES_LANES_PER_SGMII

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:50 -05:00
Tom Rini
d4e4bc898b global: Migrate CONFIG_KSNET_NETCP_BASE to CFG
Perform a simple rename of CONFIG_KSNET_NETCP_BASE to CFG_KSNET_NETCP_BASE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:50 -05:00
Tom Rini
f060d1885c global: Migrate CONFIG_KSNET_MAC_ID_BASE to CFG
Perform a simple rename of CONFIG_KSNET_MAC_ID_BASE to CFG_KSNET_MAC_ID_BASE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:50 -05:00
Tom Rini
21bd204239 global: Migrate CONFIG_KSNET_CPSW_NUM_PORTS to CFG
Perform a simple rename of CONFIG_KSNET_CPSW_NUM_PORTS to CFG_KSNET_CPSW_NUM_PORTS

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:49 -05:00
Tom Rini
7201b76978 global: Migrate CONFIG_IRAM_TOP to CFG
Perform a simple rename of CONFIG_IRAM_TOP to CFG_IRAM_TOP

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:10:40 -05:00
Tom Rini
7b5f75cffa global: Migrate CONFIG_IRAM_BASE to CFG
Perform a simple rename of CONFIG_IRAM_BASE to CFG_IRAM_BASE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:10:40 -05:00
Tom Rini
e6014294dd global: Migrate CONFIG_IMX6_PWM_PER_CLK to CFG
Perform a simple rename of CONFIG_IMX6_PWM_PER_CLK to CFG_IMX6_PWM_PER_CLK

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:10:40 -05:00
Tom Rini
cdbf8459d0 global: Migrate CONFIG_ICS307_REFCLK_HZ to CFG
Perform a simple rename of CONFIG_ICS307_REFCLK_HZ to CFG_ICS307_REFCLK_HZ

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:10:40 -05:00
Tom Rini
35661f86eb global: Migrate CONFIG_I2C_MVTWSI_BASE1 to CFG
Perform a simple rename of CONFIG_I2C_MVTWSI_BASE1 to CFG_I2C_MVTWSI_BASE1

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:10:40 -05:00
Tom Rini
45ede979e8 global: Migrate CONFIG_I2C_MVTWSI_BASE0 to CFG
Perform a simple rename of CONFIG_I2C_MVTWSI_BASE0 to CFG_I2C_MVTWSI_BASE0

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:10:40 -05:00
Tom Rini
e06b9b8d75 global: Migrate CONFIG_I2C_MULTI_BUS to CFG
Perform a simple rename of CONFIG_I2C_MULTI_BUS to CFG_I2C_MULTI_BUS

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:10:40 -05:00
Tom Rini
315390e467 global: Migrate CONFIG_FSL_SERDES2 to CFG
Perform a simple rename of CONFIG_FSL_SERDES2 to CFG_FSL_SERDES2

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:09:43 -05:00
Tom Rini
da49557003 global: Migrate CONFIG_FSL_SERDES1 to CFG
Perform a simple rename of CONFIG_FSL_SERDES1 to CFG_FSL_SERDES1

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:09:43 -05:00
Tom Rini
193d7ab1e3 global: Migrate CONFIG_FSL_PMIC_MODE to CFG
Perform a simple rename of CONFIG_FSL_PMIC_MODE to CFG_FSL_PMIC_MODE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:09:43 -05:00
Tom Rini
f200d710d8 global: Migrate CONFIG_FSL_PMIC_CS to CFG
Perform a simple rename of CONFIG_FSL_PMIC_CS to CFG_FSL_PMIC_CS

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:09:43 -05:00
Tom Rini
3a8be4da79 global: Migrate CONFIG_FSL_PMIC_CLK to CFG
Perform a simple rename of CONFIG_FSL_PMIC_CLK to CFG_FSL_PMIC_CLK

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:09:43 -05:00
Tom Rini
eaaca4245e global: Migrate CONFIG_FSL_PMIC_BUS to CFG
Perform a simple rename of CONFIG_FSL_PMIC_BUS to CFG_FSL_PMIC_BUS

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:09:43 -05:00
Tom Rini
e3e4efc04f global: Migrate CONFIG_FSL_PMIC_BITLEN to CFG
Perform a simple rename of CONFIG_FSL_PMIC_BITLEN to CFG_FSL_PMIC_BITLEN

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:09:43 -05:00
Tom Rini
c20d7cc95c global: Migrate CONFIG_FLASH_OR_PRELIM to CFG
Perform a simple rename of CONFIG_FLASH_OR_PRELIM to CFG_FLASH_OR_PRELIM

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:09:42 -05:00
Tom Rini
8938f59d54 global: Migrate CONFIG_FLASH_BR_PRELIM to CFG
Perform a simple rename of CONFIG_FLASH_BR_PRELIM to CFG_FLASH_BR_PRELIM

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:09:42 -05:00
Tom Rini
fa760c3240 global: Migrate CONFIG_FEC_MXC_PHYADDR to CFG
Perform a simple rename of CONFIG_FEC_MXC_PHYADDR to CFG_FEC_MXC_PHYADDR

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:09:42 -05:00
Tom Rini
4daffb58e6 global: Migrate CONFIG_FEC_ENET_DEV to CFG
Perform a simple rename of CONFIG_FEC_ENET_DEV to CFG_FEC_ENET_DEV

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:09:42 -05:00
Tom Rini
0613c36a7a global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG
Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:09:42 -05:00
Tom Rini
fb55ac2cfe global: Migrate CONFIG_ETHBASE to CFG
Perform a simple rename of CONFIG_ETHBASE to CFG_ETHBASE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:08:35 -05:00
Tom Rini
b9abcb8c9f global: Migrate CONFIG_ET1100_BASE to CFG
Perform a simple rename of CONFIG_ET1100_BASE to CFG_ET1100_BASE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:08:35 -05:00
Tom Rini
ef2e1745da global: Migrate CONFIG_ENV_TOTAL_SIZE to CFG
Perform a simple rename of CONFIG_ENV_TOTAL_SIZE to CFG_ENV_TOTAL_SIZE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:08:35 -05:00
Tom Rini
3673a47b55 global: Migrate CONFIG_ENV_SROM_BANK to CFG
Perform a simple rename of CONFIG_ENV_SROM_BANK to CFG_ENV_SROM_BANK

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:07:04 -05:00
Tom Rini
d6ae6c7076 global: Migrate CONFIG_ENV_SETTINGS_V2 to CFG
Perform a simple rename of CONFIG_ENV_SETTINGS_V2 to CFG_ENV_SETTINGS_V2

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:07:03 -05:00
Tom Rini
10bb746127 global: Migrate CONFIG_ENV_SETTINGS_V1 to CFG
Perform a simple rename of CONFIG_ENV_SETTINGS_V1 to CFG_ENV_SETTINGS_V1

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:07:03 -05:00
Tom Rini
4a609781d5 global: Migrate CONFIG_ENV_SETTINGS_NAND_V2 to CFG
Perform a simple rename of CONFIG_ENV_SETTINGS_NAND_V2 to CFG_ENV_SETTINGS_NAND_V2

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:07:03 -05:00
Tom Rini
fe5a5393bd global: Migrate CONFIG_ENV_SETTINGS_NAND_V1 to CFG
Perform a simple rename of CONFIG_ENV_SETTINGS_NAND_V1 to CFG_ENV_SETTINGS_NAND_V1

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:07:03 -05:00
Tom Rini
7c5b8c7c64 global: Migrate CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS to CFG
Perform a simple rename of CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS to CFG_ENV_SETTINGS_BUTTONS_AND_LEDS

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:07:03 -05:00
Tom Rini
acf29d8ccb global: Migrate CONFIG_ENV_FLAGS_LIST_STATIC to CFG
Perform a simple rename of CONFIG_ENV_FLAGS_LIST_STATIC to CFG_ENV_FLAGS_LIST_STATIC

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:07:03 -05:00
Tom Rini
42119de8b5 global: Migrate CONFIG_DW_WDT_CLOCK_KHZ to CFG
Perform a simple rename of CONFIG_DW_WDT_CLOCK_KHZ to CFG_DW_WDT_CLOCK_KHZ

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:07:03 -05:00
Tom Rini
b8089c6d68 global: Migrate CONFIG_DFU_ALT et al to CFG
Perform simple renames of:
   CONFIG_DFU_ALT to CFG_DFU_ALT
   CONFIG_DFU_ALT_BOOT_EMMC to CFG_DFU_ALT_BOOT_EMMC
   CONFIG_DFU_ALT_BOOT_SD to CFG_DFU_ALT_BOOT_SD
   CONFIG_DFU_ALT_SYSTEM to CFG_DFU_ALT_SYSTEM
   CONFIG_DFU_ENV_SETTINGS to CFG_DFU_ENV_SETTINGS

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:07:03 -05:00
Tom Rini
04501ecca2 global: Migrate CONFIG_ARM_GIC_BASE_ADDRESS to CFG
Perform a simple rename of CONFIG_ARM_GIC_BASE_ADDRESS to CFG_ARM_GIC_BASE_ADDRESS

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:07:03 -05:00
Tom Rini
218ce3695b global: Remove undef CONFIG_... for unused values
We have a number of places that undef CONFIG_... while we never
reference CONFIG_... in the first place. Remove these lines.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:07:03 -05:00
Tom Rini
dc2c451a94 valgrind: Rework test for unsupported platforms
Change things so that on an unsupported platform we will #error rather
than undef the feature.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:07:03 -05:00
Tom Rini
2c065aeeee mtd: ubi: Finish moving configuration to Kconfig
We have some unused and undefined symbols to remove references to, so do
that. Move the final things that we do set (or need to keep unset) to
Kconfig instead.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:07:03 -05:00
Tom Rini
7ee2f977b7 Convert CONFIG_NEVER_ASSERT_ODT_TO_CPU to Kconfig
This converts the following to Kconfig:
    CONFIG_NEVER_ASSERT_ODT_TO_CPU

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:07:03 -05:00
Tom Rini
8214b772cf T104xRDB: Remove non-TARGET_T1042D4RDB variants
At this point only the TARGET_T1042D4RDB variant of this is supported in
tree, so remove the remaining parts of the other platforms.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:49 -05:00
Tom Rini
46df77669e nxp: Rename CONFIG_U_BOOT_HDR_SIZE to FSL_U_BOOT_HDR_SIZE
This is always defined to 16K, so we move this over to
include/fsl_validate.h to start with. Next, we rename this from CONFIG_
to FSL_. Coalesce the various comments around this definition to be in
fsl_validate.h as well to explain the usage.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:49 -05:00
Tom Rini
0c3a6d443f usb: Remove CONFIG_USBD_HS
This define is not enabled by the only platform which currently enables
the legacy option of CONFIG_USB_DEVICE. We can drop this code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:49 -05:00
Tom Rini
4fd9373bbb net: Remove more legacy functions
Remove some of the board and arch specific non-DM_ETH helper code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:49 -05:00
Tom Rini
60910a3f02 Convert CONFIG_THOR_RESET_OFF to Kconfig
This converts the following to Kconfig:
   CONFIG_THOR_RESET_OFF

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:48 -05:00
Tom Rini
d14f3f2725 Convert CONFIG_TEGRA_ENABLE_UARTA et al to Kconfig
This converts the following to Kconfig:
   CONFIG_TEGRA_ENABLE_UARTA
   CONFIG_TEGRA_ENABLE_UARTB
   CONFIG_TEGRA_ENABLE_UARTC
   CONFIG_TEGRA_ENABLE_UARTD
   CONFIG_TEGRA_SPI
   CONFIG_TEGRA_UARTA_GPU
   CONFIG_TEGRA_UARTA_SDIO1
   CONFIG_TEGRA_VDD_CORE_TPS62361B_SET3
   CONFIG_TEGRA_VDD_CORE_TPS62366A_SET1

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:48 -05:00
Tom Rini
32b7e39db4 Convert CONFIG_STANDALONE_LOAD_ADDR to Kconfig
This converts the following to Kconfig:
   CONFIG_STANDALONE_LOAD_ADDR

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:48 -05:00
Tom Rini
f55281665a arm: ti814x: Remove remaining support code
When the ti814x_evm config was removed most, but not all, of the
relevant support code was remove.  Get rid of what was missed.

Fixes: 50b5326868 ("ti814x: Remove platform")
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:48 -05:00
Tom Rini
2b210540b1 Convert CONFIG_PEN_ADDR_BIG_ENDIAN to Kconfig
This converts the following to Kconfig:
   CONFIG_PEN_ADDR_BIG_ENDIAN

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:48 -05:00
Tom Rini
0a69d6afca Convert CONFIG_OVERWRITE_ETHADDR_ONCE to Kconfig
This converts the following to Kconfig:
   CONFIG_OVERWRITE_ETHADDR_ONCE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:48 -05:00
Tom Rini
3348c6b6a5 etamin: Rework CONFIG_NAND_CS_INIT
Enable this in the board Kconfig file, but then check for it via
CONFIG_IS_ENABLED so that it will only be true in the non-SPL case, as
is done today.  As part of this we move some defines local to where
they are used as it's board specific.

Cc: Samuel Egli <samuel.egli@siemens.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:48 -05:00
Tom Rini
71894173bb Convert CONFIG_MXC_NAND_HWECC to Kconfig
This converts the following to Kconfig:
   CONFIG_MXC_NAND_HWECC

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:48 -05:00
Tom Rini
e52fca2236 Convert CONFIG_MONITOR_IS_IN_RAM to Kconfig
This converts the following to Kconfig:
   CONFIG_MONITOR_IS_IN_RAM

As part of this, reword some of the documentation slightly to reflect
that this is in Kconfig and not a define now.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:48 -05:00
Tom Rini
829e9d2236 ddr: fsl: Remove CONFIG_MEM_INIT_VALUE
The way all of the memory init code here works is that we pass
0xDEADBEEF around for the initial value (as it's a well known 'poison'
value and so easily recognized in debuggers, etc). The only point of
this CONFIG symbol was to pass in a different value for that purpose.
Drop this symbol and cleanup the code slightly.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:48 -05:00
Tom Rini
2cc61a631b malta: Rename CONFIG_MALTA to CONFIG_TARGET_MALTA
Fixup this last remnant of CONFIG_MALTA.

Cc: Paul Burton <paul.burton@mips.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:48 -05:00
Tom Rini
960379d450 Convert CONFIG_L2_CACHE to Kconfig
This converts the following to Kconfig:
   CONFIG_L2_CACHE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:48 -05:00
Tom Rini
acdf89ec06 Convert CONFIG_KSNET_NETCP_V1_0 et al to Kconfig
This converts the following to Kconfig:
   CONFIG_KSNET_NETCP_V1_0
   CONFIG_KSNET_NETCP_V1_5

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:48 -05:00
Tom Rini
308520b8f2 global: Remove unused CONFIG symbols
This removes the following unreferenced CONFIG symbols:
   CONFIG_FDTADDR
   CONFIG_FDTFILE
   CONFIG_FLASH_SECTOR_SIZE
   CONFIG_FSL_CPLD
   CONFIG_HDMI_ENCODER_I2C_ADDR
   CONFIG_I2C_MVTWSI
   CONFIG_I2C_RTC_ADDR
   CONFIG_IRAM_END
   CONFIG_IRAM_SIZE
   CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE
   CONFIG_L1_INIT_RAM
   CONFIG_MACB_SEARCH_PHY
   CONFIG_MIU_2BIT_21_7_INTERLEAVED
   CONFIG_MTD_NAND_VERIFY_WRITE
   CONFIG_MVGBE_PORTS
   CONFIG_NETDEV
   CONFIG_NUM_DSP_CPUS
   CONFIG_PHY_BASE_ADR
   CONFIG_PHY_INTERFACE_MODE
   CONFIG_PSRAM_SCFG
   CONFIG_RAMBOOT_SPIFLASH
   CONFIG_RAMBOOT_TEXT_BASE
   CONFIG_RD_LVL
   CONFIG_ROCKCHIP_SDHCI_MAX_FREQ
   CONFIG_SETUP_INITRD_TAG
   CONFIG_SH_QSPI_BASE
   CONFIG_SMDK5420
   CONFIG_SOCRATES
   CONFIG_SPI_ADDR
   CONFIG_SPI_FLASH_QUAD
   CONFIG_SPI_FLASH_SIZE
   CONFIG_SPI_HALF_DUPLEX
   CONFIG_SPI_N25Q256A_RESET
   CONFIG_TEGRA_SLINK_CTRLS
   CONFIG_TPM_TIS_BASE_ADDRESS
   CONFIG_UBOOT_SECTOR_COUNT
   CONFIG_UBOOT_SECTOR_START
   CONFIG_VAR_SIZE_SPL
   CONFIG_VERY_BIG_RAM

And also:
   BL1_SIZE
   PHY_NO
   RESERVE_BLOCK_SIZE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:48 -05:00
Tom Rini
1353b25ec5 i2c: Remove CONFIG_I2C_MULTI_BUS
This functionality is part of the legacy I2C subsystem and is currently
unused anywhere.  Remove the remaining references.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:48 -05:00
Tom Rini
b5f7d88162 arm: samsung: Rename CONFIG_G_DNL_*_NUM variables
Following how g_dnl_bind_fixup is used on other platforms, rename the
unchanging defines used here to be prefixed with EXYNOS rather than
Samsung, and define them here.

Cc: Minkyu Kang <mk7.kang@samsung.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:48 -05:00
Tom Rini
54f80dd290 Convert CONFIG_HOSTNAME et al to Kconfig
This converts the following to Kconfig:
   CONFIG_GATEWAYIP
   CONFIG_HOSTNAME
   CONFIG_IPADDR
   CONFIG_NETMASK
   CONFIG_ROOTPATH
   CONFIG_SERVERIP
   CONFIG_UBOOTPATH

To do this, we introduce a CONFIG_USE_ form of each of the above and
change include/env_default.h to test for that to be set before setting a
value. Further, we don't want to stringify the IP address related values
as they are now properly strings via Kconfig.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:48 -05:00
Tom Rini
3f7a496531 Convert CONFIG_POWER_PCA9450 to Kconfig
This converts the following to Kconfig:
   CONFIG_POWER_PCA9450

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:48 -05:00
Tom Rini
b95de034c5 meson64: Fix missing CFG_SYS_BAUDRATE_TABLE migration
CONFIG_SYS_BAUDRATE_TABLE has already been migrated to CFG_SYS but this
instance was missed, correct.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:48 -05:00
Tom Rini
5388aa2851 Convert CONFIG_FSL_ESDHC_PIN_MUX to Kconfig
This converts the following to Kconfig:
   CONFIG_FSL_ESDHC_PIN_MUX

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:48 -05:00
Tom Rini
3a581af21a Convert CONFIG_FLASH_SPANSION_S29WS_N et al to Kconfig
This converts the following to Kconfig:

   CONFIG_FLASH_SPANSION_S29WS_N
   CONFIG_FLASH_VERIFY
   CONFIG_FSL_FM_10GEC_REGULAR_NOTATION
   CONFIG_FSL_ISBC_KEY_EXT
   CONFIG_FSL_TRUST_ARCH_v1
   CONFIG_FSL_SDHC_V2_3
   CONFIG_MAX_DSP_CPUS
   CONFIG_MIU_2BIT_INTERLEAVED
   CONFIG_SERIAL_BOOT
   CONFIG_SPI_BOOTING
   CONFIG_X86EMU_RAW_IO

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:48 -05:00
Tom Rini
98fbad631f Convert CONFIG_FLASH_SHOW_PROGRESS to Kconfig
This converts the following to Kconfig:
   CONFIG_FLASH_SHOW_PROGRESS

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:48 -05:00
Tom Rini
21491883d2 fec_mxc: Remove CONFIG_FEC_FIXED_SPEED support
This option is only used on one platform currently. However, with PHYLIB
enabled, which this platform also does, this option is not checked and
the functional use case is handled. Remove this code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:47 -05:00
Tom Rini
9b0240f8c6 Convert CONFIG_DM9000_BYTE_SWAPPED et al to Kconfig
This converts the following to Kconfig:
   CONFIG_DM9000_BYTE_SWAPPED
   CONFIG_DM9000_NO_SROM
   CONFIG_DM9000_USE_16BIT
   CONFIG_DM9000_DEBUG
   CONFIG_MXC_GPT_HCLK
   CONFIG_NAND_6BYTES_OOB_FREE_10BYTES_ECC

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:47 -05:00
Tom Rini
6bd2372094 env: Rework ENV_IS_EMBEDDED and related logic slightly
- Drop CONFIG_BUILD_ENVCRC as this is never set directly but instead
  means ENV_IS_EMBEDDED, so reference that in code and rename the Makefile
  usage to BUILD_ENVCRC.
- Remove extra-$(CONFIG_ENV_IS_EMBEDDED) line as it could never be true,
  and likely why there is an extra- line for CONFIG_ENV_IS_IN_FLASH (the
  only use case today of embedded environments).
- With these slight changes we can then see that using the calculated
  symbol of ENV_IS_EMBEDDED is the right thing to use in any code which
  needs to know this situation and can remove CONFIG_ENV_IS_EMBEDDED
  entirely.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:47 -05:00
Tom Rini
2440b5bb52 Convert CONFIG_HSMMC2_8BIT to Kconfig
This converts the following to Kconfig:
   CONFIG_HSMMC2_8BIT

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:47 -05:00
Tom Rini
5125e136a9 arm: trats2: Set mmcdev directly
Only this platform sets mmcdev via CONFIG_MMC_DEFAULT_DEV so we
hard-code that default directly.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:47 -05:00
Tom Rini
5732cf24dd x530: Remove unused symbols
The symbols CONFIG_UBI_PART and CONFIG_UBIFS_VOLUME are not referenced
anywhere, drop them.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:47 -05:00
Tom Rini
b41eb5a27e p1_p2_rdb: Remove unused environment sections
The CONFIG_USB_FAT_BOOT, CONFIG_USB_EXT2_BOOT and CONFIG_NORBOOT defines
are not referenced anywhere, so remove them.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:37 -05:00
Tom Rini
4475d017c5 arm: exynos5: Migrate USB_BOOTING to Kconfig
This symbol is enabled for all exynos5 platforms, move to Kconfig and
select it.

Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-21 19:04:33 -05:00
Tom Rini
14f43797d0 Prepare v2023.01-rc4
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAmOgaw0ACgkQFHw5/5Y0
 tyxIeQv8DfAAB8hN+wWeDhQAJBXBLvV+RrocGJ2lpuWN0DUgT955l0zSjP4eD5I/
 sSsT8iJ15obkbWHq61V9W81Velw5qR+gHW9IAzFKiQBfvdcdfgWFeme9fWp/gqxn
 vvPc2sULA9utkc+kQ+qJy2hmTM7I0ZbKzUwTXSv+Tp9on3vlc0quKSHiZ1EvHNww
 8tW13d1r+Be+CC+GVPrhJojfKBcYVJhW21rJMgb4JdfGNWKmpUpF6fUzHe0wiy2P
 HSnScr44E099t9RDZabw0V1fEgQqxIAmL1qQamXf9ddLZQM9Sq63lygTtGsqg61+
 qeHCZVjPg9cXayGfRVesH8sko3vW+IPuo0Q6Ox0vAyRSyzTpOcTuzn3RcMrq+mfu
 ZRF32aFJKVvAI3xesOj1aCBBYjl4POiHA8i3yeP9KcjqW3So0aphDtxp1idgwOZl
 kIxuC4ItWyF7xoyng/7RWwr2VjcKSyw58stRjfV+WNcByV4+ud1A59vsgZOqO49m
 0bLx5dGu
 =EX/F
 -----END PGP SIGNATURE-----

Merge tag 'v2023.01-rc4' into next

Prepare v2023.01-rc4

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-21 13:09:01 -05:00
Heinrich Schuchardt
70a4ac693d efi_loader: fix efi_get_next_variable_name_mem()
The VariableNameSize parameter is in bytes but u16_strnlen() counts u16.

Fix the parameter check for null termination.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2022-12-20 16:06:48 +01:00
Masahisa Kojima
ce3270849b eficonfig: carve out efi_get_next_variable_name_int calls
To retrieve the EFI variable name by efi_get_next_variable_name_int(),
the sequence of alloc -> efi_get_next_variable_name_int ->
realloc -> efi_get_next_variable_name_int is required.
In current code, this sequence repeatedly appears in
the several functions. It should be curved out a common function.

This commit also fixes the missing free() of var_name16
in eficonfig_delete_invalid_boot_option().

Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2022-12-20 16:06:48 +01:00
Eugen Hristev
f2d6c888f4 dt-bindings: mfd: add at91-usart.h from Linux
Copy include file dt-bindings/mfd/at91-usart.h from Linux

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2022-12-20 11:59:07 +02:00
Tom Rini
daa531cc5c Merge tag 'u-boot-rockchip-20221219' of https://source.denx.de/u-boot/custodians/u-boot-rockchip
- Only call binman when TPL available;
- rk3128 DTS fix;
- Fix GPT table corruption for rk3399 puma ;
- Fix i2c for rk3399 Pinebookpro;
- Enable UEFI capsule update for RockPi4;
2022-12-19 08:33:24 -05:00
Sughosh Ganu
e86c789ca3 rockpi4: board: Add firmware image information for capsule updates
Add information that will be needed for enabling the UEFI capsule
update feature on the RockPi4 boards. With the feature enabled, it
would be possible to update the idbloader and u-boot.itb images on the
RockPi4B and RockPi4C variants.

Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-12-19 10:56:12 +08:00
Johan Jonker
4d89330b8a rockchip: rk3128-cru: sync the clock dt-binding header from Linux
In order to update the DT for rk3128
sync the clock dt-binding header.
This is the state as of v6.0 in Linux.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-12-19 10:56:12 +08:00
Tom Rini
255cebbfa3 Pull request for efi-2023-01-rc4
Documentation:
 
 * Fix htmldoc build dependency
 
 UEFI:
 
 * Adjust EBBR version for compatibility table
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAmOd384ACgkQxIHbvCwF
 GsQ6zw/+OQlDLlPACDYA/ecSROHv3vuBLPpzwoQP1e2OEyB0IrfHUAmEmYw5Uss7
 ItwwxIQ/wXj41gNBlyk7Xb8llvvKkFUawtcHMf35kNEF3K/6X8WvSs0dGcutMaF/
 C0ptuZYFmKyJZRludEDoWYZHHI9d/MuIDstGyvmTcajKsdWMPPKrOU0hHBfxgRII
 z++iJFq8w0182fBdd84WvZuoM8JP6Ob9TnlBQG7MPK4eSC42GdoqSV6P6AXFj0I9
 BWS+aFCSCwK33QgFe+xRh56BSxh9QF7k80vtBdmwU/NvjeMNuW9rNIHbnIJig12O
 ldk+MecxJn/HCgShgrx92q+rT9hWi0BcCheozkqqCBah32bTum/qiq/KsE8lEflp
 k9KH9NcvSFE2mufglQNBgM1/9bAs8AT0S9bhJk/ivwdz+VahvQDKN+7u0tlca0P1
 DJv22qE9qTEL62dTe1EO14i5QYkok3fPrLXX4joqB7VvoNX0zYaEX6BBSDTzXw9b
 8A3SnMKg9DfZ513vSe1wn3KIbZgnPmx0tfh2QnBs2iquARn1aRuRJff/X9SFfKFc
 oBIbN34IogzadIcPTtiSk1WhirzVx5Lupgf/xSJ5cQmPGc9kzP5BPUX15IZXOvlY
 ia7TP3Q6EjpVepiB267gmTV8DyUkA/5zZ7a4doMJHD7GrCY3BNg=
 =LS6d
 -----END PGP SIGNATURE-----

Merge tag 'efi-2023-01-rc4' of https://source.denx.de/u-boot/custodians/u-boot-efi

Pull request for efi-2023-01-rc4

Documentation:

* Fix htmldoc build dependency

UEFI:

* Adjust EBBR version for compatibility table
2022-12-18 08:10:09 -05:00
Vincent Stehlé
63db1561f1 efi: adjust ebbr to v2.1 in conformance profile
The EFI Conformance Profile Table entry for EBBR appears in v2.1.0 of the
EBBR specification[1]. Update naming accordingly.

While at it, update the EBBR version referenced in the documentation.

[1]: https://github.com/ARM-software/ebbr/releases/tag/v2.1.0

Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-12-17 13:37:33 +00:00
Andre Przywara
ed82586c40 sunxi: remove unused CONFIG_MMC_SUNXI_SLOT
There is a CONFIG_MMC_SUNXI_SLOT definition in our sunxi_common.h config
header, which was used to note the first MMC controller to initialise.
The definition in that header was always set to 0, with no easy way of
overriding this, and certainly none of the existing boards made any use
of that (non-)feature.
Remove that definition and replace it with a constant 0 in the only
user, in board.c. It turns out that this is safe, as this is only used
in the SPL, and the BROM also unconditionally initialises MMC0.
This also removes the last legacy config symbol with SUN*I in it from
the whitelist.

Reviewed-by: Samuel Holland <samuel@sholland.org>
Tested-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-12-14 22:31:06 +00:00
Holger Brunck
aeb13924f4 km/mpc8360: remove unused CONFIG_SYS_PAXE defines
These are unused defines and can be dropped.

Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>
2022-12-12 16:51:00 -05:00
Holger Brunck
31464f9455 km/ppc: migrate all mpc83xx to DM_I2C
Enable DM_I2C and I2C mux to get rid of the usage of the legacy
i2c driver.

Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>
2022-12-12 16:49:54 -05:00
Holger Brunck
3bcf9c08a3 board/km/secu: migrate to use environment text files
Instead of having these defines in a header file, move them to
a simple text file.

Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>
2022-12-12 16:49:25 -05:00
Holger Brunck
6f7c936fbd board/km/cent2: migrate to environment text file
Use like the other boards a text file for the environment.
As this is the last user of keymile-common.h we can now remove this
file completely.

Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>
2022-12-12 16:49:24 -05:00
Holger Brunck
0cc0c098c8 km/powerpc: migrate to env.txt file
Use already present common.env file and add a powerpc specific env
so that we can move all the environment defines to text files.

Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>
2022-12-12 16:48:33 -05:00
Holger Brunck
553d7607c6 board/km: move ls102xa boards to environment text files
Create a common.env which we can use later on also for other boards.

Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>
2022-12-12 16:47:21 -05:00
Patrick Delaunay
72e79f998e configs: SBx81LIFKW: move MTDPART_DEFAULT in defconfig
Replace MTDPARTS_DEFAULT in the config include file by
CONFIG_MTDPARTS_DEFAULT in defconfig to complete the Kconfig migration.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-12-12 16:46:07 -05:00
Patrick Delaunay
91b9551fb3 configs: SBx81LIFXCAT: move MTDPART_DEFAULT in defconfig
Replace MTDPARTS_DEFAULT in the config include file by
CONFIG_MTDPARTS_DEFAULT in defconfig to complete the Kconfig migration.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-12-12 16:46:07 -05:00
Patrick Delaunay
bde4a407ea configs: x530: move MTDPART/MTDIDS_DEFAULT in defconfig
Replace MTDIDS_DEFAULT and MTDPARTS_DEFAULT in the config include file by
CONFIG_MTDIDS_DEFAULT and CONFIG_MTDPARTS_DEFAULT in defconfig to complete
the Kconfig migration.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-12-12 16:46:07 -05:00
Patrick Delaunay
828d7e6022 configs: am333x_guardian: move MTDIDS_DEFAULT in defconfif
Replace MTDIDS_DEFAULT in config include file by CONFIG_MTDIDS_DEFAULT
in defonfig to complete the Kconfig migration

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-12-12 16:46:07 -05:00
Patrick Delaunay
a5dacef738 cmd: pxe: support INITRD and FDT selection with FIT
Since the commit d5ba6188df ("cmd: pxe_utils: Check fdtcontroladdr
in label_boot") the FDT or the FDTDIR label is required in extlinux.conf
and the fallback done by bootm command when only the device tree present
in this command parameters is no more performed when FIT is used for
kernel.

When the label FDT or FDTDIR are absent or if the device tree file is
absent, the PXE command in U-Boot uses the default U-Boot device tree
selected by fdtcontroladdr = gd->fdt_blob, it is the "Scenario 3".

With this scenario the bootm FIP fallback is no more possible with
the extlinux.conf when only "kernel" label is present and is a FIP:

  kernel <path>#<conf>[#<extra-conf[#...]]

As the U-Boot FDT is always provided in the third bootm argument,
the device tree found in FIP is not used as fallback, it was done
previously in boot_get_fdt().

This patch adds a new field kernel_label to save the full kernel label.
The FDT bootm parameters use the kernel address (to avoid to load a
second time the same FIP) and the config when this full label is reused
for "fdt" or "initrd" label.

This FIP support in extlinux.conf is restored when the "FDT" label
can be found and select the same FIP (identical file and configuration):

  kernel <path>#<conf>[#<extra-conf[#...]]
  fdt <path>#<conf>[#<extra-conf[#...]]

The patch add also this possibility for initrd.

  initrd <path>#<conf>[#<extra-conf[#...]]

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
2022-12-12 14:03:12 -05:00
Dario Binacchi
670789f5ba mtd: nand: drop EXPORT_SYMBOL_GPL for nanddev_erase()
This function is only used within this module, so it is no longer
necessary to use EXPORT_SYMBOL_GPL().

This patch parallels the work done in the following patch:
https://lore.kernel.org/linux-mtd/20221018170205.1733958-1-dario.binacchi@amarulasolutions.com

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-By: Michael Trimarchi <michael@amarulasolutions.com>
Link: https://lore.kernel.org/all/20221108090719.3631621-1-dario.binacchi@amarulasolutions.com
2022-12-10 14:35:55 +01:00
Bryan Brattlof
719bd650c3 configs: introduce configs for the am62a
Introduce the minimum configs, only SD-MMC and UART boot related
settings, to serve as a good starting point for the am62a as we add more
functionality.

Signed-off-by: Bryan Brattlof <bb@ti.com>
[trini: Disable CONFIG_NET as it's not used, in both platforms]
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-09 14:12:28 -05:00
Bryan Brattlof
b6cbcd6155 arm: mach-k3: am62a: introduce auto-generated SoC data
Introduce the auto-generated clock tree and power domain data needed to
attach the am62a into the power-domain and clock frameworks of uboot

Signed-off-by: Bryan Brattlof <bb@ti.com>
2022-12-09 14:10:28 -05:00
Bryan Brattlof
253802912a arm: dts: introduce am62a7 dtbs from linux kernel
Introduce the basic am62a7 SoC dtbs from the v6.1-rc3 tag of the linux
kernel along with the new am62a specific pinmux definition that we will
use to generate the dtbs for the u-boot-spl and u-boot binaries

Co-developed-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
2022-12-09 14:10:28 -05:00
Sean Anderson
640aecb416 rtc: Add fallbacks for dm functions
This adds fallbacks for the various dm_rtc_* functions. This allows
common code to use these functions without ifdefs.

Fixes: c8ce7ba87d ("misc: Add support for nvmem cells")
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
2022-12-09 14:10:28 -05:00
Tom Rini
8f17040877 - Drop MMCI interrupt-names in STM32H743, STM32MP15 and STM322MP13 DT
DHSOM:
   - Enable assorted ST specific commands
   - Add version variable
   - Add boot counter
 STM32MP13:
   - Add sdmmc cd-gpios for STM32MP135F-DK
   - Add clock & reset support
 STM32 ADC:
   - Split channel init into several routines
   - Add support of generic channels binding
 -----BEGIN PGP SIGNATURE-----
 
 iQJQBAABCgA6FiEEXyrViUccKBz9c35Jysd4L3sz/6YFAmOQvIUcHHBhdHJpY2Uu
 Y2hvdGFyZEBmb3NzLnN0LmNvbQAKCRDKx3gvezP/pgRHD/42Dhlm8qyeBM+mFp/C
 vtGLkXHof7Iec48uGfMh2qhb4tMWpH9jQSF/iK8GERlaBJesNTuDLG2y9e411f5x
 OfnXeoT1vxlxARo/3D9ESvR8q1/6wRWYWYQ7W08yVmMakLjF2ojky1h0mgvJj1x0
 yzFdZVfrlx3XtP0opC8h2NtfVAa2fq8L6fx6r7nFKhPd6PSlDBeyiW/5fC/EyTLW
 Sqn7/POrOCgpWSuStcosWNkHNldupi7Dv0zGh0XWEfAv/XBqR0LD6KAEwUygsY4i
 zGKtfZeOrwAhKMeA2MhMyM8oW7gNPw8Xia74a5vqVv1qFrd6arCUfvhTn/4T6Kyt
 dtc93i7XR0bYumYaEb5DLeqge6QEIIjVb36g0c/njWI8AerOsnRKhUpuhF6Y58LU
 RM4y8MYWY0bsTsSCCHhKIm/DPR/iA4m076Obdy+iRRNG4c4fg8/EfcUsXaoHvmap
 Bi1edpFmMh92Uv3sdgkMHS1j9Vo8gvnCRujEUiPvSFHmrMWo1OW8xVoIPgNCdMYF
 IkmTbAelRK8MSgFy2DLBbMeOTMZN1VFTdzVxBRLP4DXNZQWx2gcHrVLAjzYnMpsG
 YvSHz+pJJ8q8Bt8fTl0DCF8R+99DTB8j0o8MDQxo4a02njoNtcvDbeCkdT2ddzPX
 s4WhBkfgBWNv1tYBVNscEr0aTw==
 =DkkE
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20221207' of https://source.denx.de/u-boot/custodians/u-boot-stm

- Drop MMCI interrupt-names in STM32H743, STM32MP15 and STM322MP13 DT

DHSOM:
  - Enable assorted ST specific commands
  - Add version variable
  - Add boot counter
STM32MP13:
  - Add sdmmc cd-gpios for STM32MP135F-DK
  - Add clock & reset support
STM32 ADC:
  - Split channel init into several routines
  - Add support of generic channels binding
2022-12-08 11:25:08 -05:00
Tom Rini
573359d14d Merge https://source.denx.de/u-boot/custodians/u-boot-usb
- DFU and RNDIS fixes
2022-12-08 11:24:50 -05:00
Balamanikandan Gunasundar
c41e05bab0 board: sam9x60ek: remove nand init from board file
Move this out of board file as this is done by the DM based NAND flash
driver. The EBI chip select configuration, iomux and timings are
handled by the driver

Signed-off-by: Balamanikandan Gunasundar <balamanikandan.gunasundar@microchip.com>
2022-12-08 18:06:27 +02:00
Balamanikandan Gunasundar
2dc1b8fe17 mfd: syscon: atmel-smc: Add new helpers to ease SMC regs manipulation
Add helper functions for atmel Static Memory Controller. The functions
are required to configure SMC. This file is inherited from the work
done by Boris Brezillon for Linux

Signed-off-by: Balamanikandan Gunasundar <balamanikandan.gunasundar@microchip.com>
2022-12-08 18:06:27 +02:00
Balamanikandan Gunasundar
de32a2a32a mfd: syscon: Add atmel-matrix registers definition
This file is copied from Linux. AT91 SoCs have a memory range reserved
for internal bus configuration. Expose those registers so that drivers
can make use of the matrix syscon declared in at91 DTs.

Signed-off-by: Balamanikandan Gunasundar <balamanikandan.gunasundar@microchip.com>
2022-12-08 18:06:27 +02:00
Marc Kleine-Budde
28f924f265 tools: mkimage: add new image type "fdt_legacy"
If the user select the image type "flat_dt" a FIT image will be build.
This breaks the legacy use case of putting a Flat Device Tree into a
legacy u-boot image.

Add a new image type "fdt_legacy" to build a legacy u-boot image
with a "flat_dt" type.

Link: https://lore.kernel.org/all/20221028155205.ojw6tcso2fofgnhm@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
2022-12-08 09:29:02 -05:00
Patrick Delaunay
bcd4110702 dfu: Make DFU virtual backend SPL friendly
Define stub for dfu_*_virt function in SPL, because
CONFIG_SPL_DFU_VIRT is not defined.

This patch avoids compilation issue in dfu_fill_entity() when
CONFIG_SPL_DFU is activated because the dfu_fill_entity_virt()
function is not available.

Fixes: ec44cace4b ("dfu: add DFU virtual backend")
Reported-by: Marek Vasut <marex@denx.de>
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Tested-by: Marek Vasut <marex@denx.de>
2022-12-08 14:30:39 +01:00
Kautuk Consul
1c03ab9f4b lib: Add common semihosting library
We factor out the arch-independent parts of the ARM semihosting
implementation as a common library so that it can be shared
with RISC-V.

Signed-off-by: Kautuk Consul <kconsul@ventanamicro.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2022-12-08 15:15:22 +08:00
Tom Rini
e524f3a449 net: Remove eth_legacy.c
As there are no more non-DM_ETH cases for networking, remove this legacy
file and update the Makefile to match current usage.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-07 16:04:17 -05:00
Tom Rini
b8daa6e9ee usb: eth: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to remove
the non-DM_ETH support code fro usb_ether itself.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-07 16:04:17 -05:00
Tom Rini
36af92ba85 net: phy: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to
remove the non-DM_ETH support code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-07 16:04:17 -05:00
Tom Rini
ecca44805d net: ethoc: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to
remove the non-DM_ETH support code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-07 16:04:17 -05:00
Tom Rini
2f420f135f net: tsec: Remove non-DM_ETH support code
As DM_ETH is required for all network drivers, it's now safe to remove
the non-DM_ETH support code.  Doing this removes some board support code
which was also unused. Finally, this removes some CONFIG symbols that
otherwise needed to be migrated to Kconfig, but were unused in code now.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-07 16:04:16 -05:00
Gabriel Fernandez
01c8b664d2 dt-bindings: stm32mp13: add clock & reset support for STM32MP13
Add support of stm32mp13 DT bindings of clock and reset.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-12-07 16:49:35 +01:00
Tom Rini
7102d324f6 m68k: Rename CONFIG_WATCHDOG_TIMEOUT to CONFIG_WATCHDOG_TIMEOUT_MSECS
In practice, it is clear that the usage in m68k of
CONFIG_WATCHDOG_TIMEOUT is setting a value in milliseconds. Rename this
to the existing symbol and move to Kconfig.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 18:16:43 -05:00
Tom Rini
9cebc4ad8e post: Migrate to Kconfig
We move the existing CONFIG_POST_* functionality over to CFG_POST and
then introduce CONFIG_POST to Kconfig.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:11:50 -05:00
Tom Rini
d948c8988c sandbox: Rework how SDL is enabled / disabled
Given that we can use Kconfig logic directly to see if we have a program
available on the host or not, change from passing NO_SDL to instead
controlling CONFIG_SANDBOX_SDL in Kconfig directly. Introduce
CONFIG_HOST_HAS_SDL as the way to test for sdl2-config and default
CONFIG_SANDBOX_SDL on if we have that, or not.

Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:11:50 -05:00
Tom Rini
17f13e7119 scripts/config_whitelist.txt: Remove more referenced symbols
Perform some deeper investigation on the remaining symbols listed in
this file and remove more.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:11:50 -05:00
Tom Rini
be3bea2ba3 Convert CONFIG_VSC7385_ENET et al to Kconfig
This converts the following to Kconfig:
   CONFIG_VSC7385_ENET
   CONFIG_VSC9953

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:08:38 -05:00
Tom Rini
a9c3bce362 Convert CONFIG_USB_GADGET_AT91 to Kconfig
This converts the following to Kconfig:
   CONFIG_USB_GADGET_AT91

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:08:37 -05:00
Tom Rini
08d01cda45 Nokia RX-51: Migrate legacy USB device options to Kconfig
Move a number of legacy USB UDC options to Kconfig, over from the config
header.

Cc: Pali Rohár <pali@kernel.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:08:37 -05:00
Tom Rini
b43295a277 Convert CONFIG_TEGRA_CLOCK_SCALING et al to Kconfig
This converts the following to Kconfig:
   CONFIG_TEGRA_CLOCK_SCALING
   CONFIG_TEGRA_LP0
   CONFIG_TEGRA_PMU

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:08:37 -05:00
Tom Rini
fcd7ba655e Convert CONFIG_TPS6586X_POWER et al to Kconfig
This converts the following to Kconfig:
   CONFIG_TPS6586X_POWER
   CONFIG_TWL6030_POWER

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:08:37 -05:00
Tom Rini
8ce59b5932 Convert CONFIG_SPD_EEPROM to Kconfig
This converts the following to Kconfig:
   CONFIG_SPD_EEPROM

Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:08:37 -05:00
Tom Rini
d91365203c Convert CONFIG_SMSC_LPC47M et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SMSC_LPC47M
   CONFIG_SMSC_SIO1007

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:08:37 -05:00
Tom Rini
1c34f7885d Convert CONFIG_SH_GPIO_PFC et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SH_GPIO_PFC
   CONFIG_TMU_TIMER

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:08:37 -05:00
Tom Rini
ea467ea1cd Convert CONFIG_RTC_DS1337 et al to Kconfig
This converts the following to Kconfig:
   CONFIG_RTC_DS1337
   CONFIG_RTC_DS1337_NOOSC
   CONFIG_RTC_DS1338
   CONFIG_RTC_DS1374
   CONFIG_RTC_DS3231
   CONFIG_RTC_MC13XXX
   CONFIG_RTC_MXS
   CONFIG_RTC_PT7C4338

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:08:37 -05:00
Tom Rini
c3187fb144 Convert CONFIG_PCA953X to Kconfig
This converts the following to Kconfig:
   CONFIG_PCA953X

Cc: Uri Mashiach <uri.mashiach@compulab.co.il>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:07:13 -05:00
Tom Rini
9200011e95 Convert CONFIG_NAND_KMETER1 et al to Kconfig
This converts the following to Kconfig:
   CONFIG_NAND_ECC_BCH
   CONFIG_NAND_KIRKWOOD
   CONFIG_NAND_KMETER1

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:07:13 -05:00
Tom Rini
6c03a65275 Convert CONFIG_MXS_OCOTP to Kconfig
This converts the following to Kconfig:
   CONFIG_MXS_OCOTP

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:07:13 -05:00
Tom Rini
2568bd6db7 arm: Remove unused mx27 code
We no longer have any i.MX27 platforms, remove the remaining support
code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:07:13 -05:00
Tom Rini
4982e123b2 arm: samsung: Move CONFIG_MISC_COMMON to Kconfig
This option controls using board/samsung/common/misc.c, so add a Kconfig
file there as well and select it from the boards which use this
functionality.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
2022-12-05 16:07:13 -05:00
Tom Rini
00faea644a arm: ls102xa: Migrate LS102XA_STREAM_ID
This symbol appears to be globally used in the architecture, select it.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:07:13 -05:00
Tom Rini
d5596cbc6e arm: lpc32xx: Remove unused hsuart driver
This driver is not enabled in any config currently, remove it.

Cc: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:07:13 -05:00
Tom Rini
68e54040cc sandbox: Move CONFIG_IO_TRACE to Kconfig
This is only used on sandbox, so select it there.

Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:07:13 -05:00
Tom Rini
c136a86105 Convert CONFIG_IOMUX_SHARE_CONF_REG et al to Kconfig
This converts the following to Kconfig:
   CONFIG_IOMUX_LPSR
   CONFIG_IOMUX_SHARE_CONF_REG

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:07:12 -05:00
Tom Rini
d5c77533b4 Convert CONFIG_IODELAY_RECALIBRATION to Kconfig
This converts the following to Kconfig:
   CONFIG_IODELAY_RECALIBRATION

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:07:12 -05:00
Tom Rini
500dfebf22 mpc8548cds: Migrate CONFIG_INTERRUPTS to Kconfig
Only this platform sets this option, define it in the board Kconfig
file.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:07:12 -05:00
Tom Rini
0ea156ba00 Convert CONFIG_IMX_VIDEO_SKIP et al to Kconfig
This converts the following to Kconfig:
   CONFIG_IMX_VIDEO_SKIP
   CONFIG_IMX_HDMI

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:07:12 -05:00
Tom Rini
4eea765740 pwm: imx: Remove unused references to CONFIG_IMX6_PWM_PER_CLK
On platforms that use DM_PWM, we do not need to define this value
anymore, so remove it from config files.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:07:12 -05:00
Tom Rini
19b4040df0 Convert CONFIG_HWCONFIG to Kconfig
This converts the following to Kconfig:
   CONFIG_HWCONFIG

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:07:12 -05:00
Tom Rini
d9feb83505 Convert CONFIG_POWER_LTC3676 et al to Kconfig
This converts the following to Kconfig:
   CONFIG_POWER_FSL
   CONFIG_POWER_FSL_MC13892
   CONFIG_POWER_HI6553
   CONFIG_POWER_LTC3676
   CONFIG_POWER_PFUZE100
   CONFIG_POWER_PFUZE3000
   CONFIG_POWER_SPI
   CONFIG_POWER_TPS65090_EC
   CONFIG_POWER_TPS65218
   CONFIG_POWER_TPS65910

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:07:12 -05:00
Tom Rini
022dc9e505 Convert CONFIG_HIKEY_GPIO et al to Kconfig
This converts the following to Kconfig:
   CONFIG_HIKEY_GPIO
   CONFIG_TCA642X

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:06:43 -05:00
Tom Rini
5cafaedeac Convert CONFIG_FSL_SERDES to Kconfig
This converts the following to Kconfig:
   CONFIG_FSL_SERDES

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:06:43 -05:00
Tom Rini
060613f119 Convert CONFIG_FSL_IIM to Kconfig
This converts the following to Kconfig:
   CONFIG_FSL_IIM

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:06:43 -05:00
Tom Rini
345c09de5e Convert CONFIG_FSL_DEVICE_DISABLE to Kconfig
This converts the following to Kconfig:
   CONFIG_FSL_DEVICE_DISABLE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:06:43 -05:00
Tom Rini
2a776c79db Convert CONFIG_FSL_CADMUS to Kconfig
This converts the following to Kconfig:
   CONFIG_FSL_CADMUS

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:06:43 -05:00
Tom Rini
65cc0e2a65 global: Move remaining CONFIG_SYS_* to CFG_SYS_*
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do
not easily transition to Kconfig. In many cases they likely should come
from the device tree instead. Move these out of CONFIG namespace and in
to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:06:08 -05:00
Tom Rini
a322afc9f9 global: Move remaining CONFIG_*SRIO_* to CFG_*
The rest of the unmigrated CONFIG symbols in the SRIO namespace do not
easily transition to Kconfig. In many cases they likely should come from
the device tree instead. Move these out of CONFIG namespace and in to
CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:06:08 -05:00
Tom Rini
97396cc9ce Convert CONFIG_SYS_SRIO et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SRIO1
   CONFIG_SRIO2
   CONFIG_SRIO_PCIE_BOOT_MASTER
   CONFIG_SYS_SRIO

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:06:07 -05:00
Tom Rini
3b8dfc42a2 Convert CONFIG_SYS_TIMER_COUNTS_DOWN to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_TIMER_COUNTS_DOWN

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:06:07 -05:00
Tom Rini
aa6e94deab global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:06:07 -05:00
Tom Rini
aec118ebe6 imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h
There are now no flags being set in these files, so remove them.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:06:07 -05:00
Tom Rini
f16b1a6c00 spl: Migrate SYS_SATA_FAT_BOOT_PARTITION to Kconfig
This moves SYS_SATA_FAT_BOOT_PARTITION to Kconfig and enforces the
current default via Kconfig rather than C code.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:06:07 -05:00
Tom Rini
2db82bf2bd Convert CONFIG_SYS_PMAN et al to Kconfig
This converts the following to Kconfig:
   CONFIG_NOBQFMAN
   CONFIG_SYS_DPAA_DCE
   CONFIG_SYS_DPAA_FMAN
   CONFIG_SYS_DPAA_PME
   CONFIG_SYS_DPAA_RMAN
   CONFIG_SYS_PMAN

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:06:07 -05:00
Tom Rini
ecc8d425fd global: Move remaining CONFIG_SYS_PCI* to CFG_SYS_PCI*
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_PCI and
CONFIG_SYS_PCIE namespace do not easily transition to Kconfig. In many
cases they likely should come from the device tree instead. Move these
out of CONFIG namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:06:07 -05:00
Tom Rini
789bb9537a Convert CONFIG_SYS_OMAP_ABE_SYSCK to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_OMAP_ABE_SYSCK

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:06:07 -05:00
Tom Rini
3408d96e6c Remove unused symbols
This commit removes the following unused symbols:
   CONFIG_SYS_NVRAM_BASE_ADDR
   CONFIG_SYS_NVRAM_SIZE
   CONFIG_SYS_PAXE_BASE
   CONFIG_SYS_PCCNT
   CONFIG_SYS_PCDAT
   CONFIG_SYS_PCDDR
   CONFIG_SYS_PCI1_ADDR
   CONFIG_SYS_PCI2_ADDR
   CONFIG_SYS_PCI1_IO_BUS
   CONFIG_SYS_PCI1_IO_SIZE
   CONFIG_SYS_PCI1_MEM_BUS
   CONFIG_SYS_PCI1_MEM_SIZE
   CONFIG_SYS_PCIE3_ADDR
   CONFIG_SYS_PCIE4_ADDR
   CONFIG_SYS_PCIE3_IO_PHYS
   CONFIG_SYS_PCIE3_IO_VIRT
   CONFIG_SYS_PCIE4_IO_PHYS
   CONFIG_SYS_PCIE4_IO_VIRT
   CONFIG_SYS_PLL_SETTLING_TIME
   CONFIG_SYS_QMAN_CENA_BASE
   CONFIG_SYS_QMAN_SP_CENA_SIZE
   CONFIG_SYS_RCAR_I2C0_BASE
   CONFIG_SYS_RCAR_I2C1_BASE
   CONFIG_SYS_RCAR_I2C2_BASE
   CONFIG_SYS_RCAR_I2C3_BASE
   CONFIG_SYS_SATA
   CONFIG_SYS_SDRAM_BASE2
   CONFIG_SYS_SGMII_REFCLK_MHZ
   CONFIG_SYS_SGMII_LINERATE_MHZ
   CONFIG_SYS_SGMII_RATESCALE
   CONFIG_SYS_SH_SDHI0_BASE
   CONFIG_SYS_SH_SDHI0_BASE
   CONFIG_SYS_SH_SDHI1_BASE
   CONFIG_SYS_SH_SDHI2_BASE
   CONFIG_SYS_SH_SDHI3_BASE
   CONFIG_SYS_SPI_ST_ENABLE_WP_PIN
   CONFIG_SYS_SPI_U_BOOT_SIZE
   CONFIG_SYS_VCXK_ACKNOWLEDGE_DDR
   CONFIG_SYS_VCXK_ACKNOWLEDGE_PIN
   CONFIG_SYS_VCXK_ACKNOWLEDGE_PORT
   CONFIG_SYS_VCXK_BASE
   CONFIG_SYS_VCXK_DEFAULT_LINEALIGN
   CONFIG_SYS_VCXK_DOUBLEBUFFERED
   CONFIG_SYS_VCXK_ENABLE_DDR
   CONFIG_SYS_VCXK_ENABLE_PIN
   CONFIG_SYS_VCXK_ENABLE_PORT
   CONFIG_SYS_VCXK_INVERT_DDR
   CONFIG_SYS_VCXK_INVERT_PIN
   CONFIG_SYS_VCXK_INVERT_PORT
   CONFIG_SYS_VCXK_REQUEST_DDR
   CONFIG_SYS_VCXK_REQUEST_PIN
   CONFIG_SYS_VCXK_REQUEST_PORT
   CONFIG_SYS_VSC7385_BR_PRELIM
   CONFIG_SYS_VSC7385_OR_PRELIM

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:06:07 -05:00
Tom Rini
cdc5ed8f1f global: Move remaining CONFIG_SYS_NUM_* to CFG_SYS_NUM_*
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_NUM
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:06:07 -05:00
Tom Rini
91092132ba global: Move remaining CONFIG_SYS_NS16550_* to CFG_SYS_NS16550_*
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_NS16550
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:06:07 -05:00
Tom Rini
9591b63531 Convert CONFIG_SYS_NS16550_MEM32 et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SPL_NS16550_MIN_FUNCTIONS
   CONFIG_SYS_NS16550_MEM32
   CONFIG_SYS_NS16550_PORT_MAPPED
   CONFIG_SYS_NS16550_REG_SIZE
   CONFIG_SYS_NS16550_SERIAL

To do this we also introduce CONFIG_SPL_SYS_NS16550_SERIAL so that
platforms can enable the legacy driver here for SPL.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:06:07 -05:00
Tom Rini
57c3afbc27 powerpc: Rename CONFIG_NS16550_MIN_FUNCTIONS
This symbol is specific to the PowerPC SPL implementation, so rename
this to reflect that it's in SPL and used / tested there, so that we can
then safely migrate it to Kconfig.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:05:38 -05:00
Tom Rini
0ed384fd2f global: Move remaining CONFIG_SYS_NOR_* to CFG_SYS_NOR_*
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_NOR
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:05:38 -05:00
Tom Rini
4e5909450e global: Move remaining CONFIG_SYS_NAND_* to CFG_SYS_NAND_*
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_NAND
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:05:38 -05:00
Tom Rini
0cd0325964 Convert CONFIG_SYS_NAND_SIZE to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_NAND_SIZE

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:05:38 -05:00
Tom Rini
a9f03760c1 Convert CONFIG_SYS_NAND_PAGE_2K et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_NAND_PAGE_2K
   CONFIG_SYS_NAND_PAGE_4K

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:05:38 -05:00
Tom Rini
1a792803d8 Convert CONFIG_SYS_NAND_NO_SUBPAGE_WRITE to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_NAND_NO_SUBPAGE_WRITE

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:05:38 -05:00
Tom Rini
4d3495deb6 Convert CONFIG_SYS_NAND_MAX_OOBFREE et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_NAND_MAX_OOBFREE
   CONFIG_SYS_NAND_MAX_ECCPOS

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:05:38 -05:00
Tom Rini
b41641d52e mtd: nand: raw: atmel_nand: Use ATMEL_BASE_ECC directly
This is the only driver, and only one platform makes use of, setting
CONFIG_SYS_NAND_ECC_BASE. Reference ATMEL_BASE_ECC directly in this
case.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:05:38 -05:00
Tom Rini
41fa8f471d Convert CONFIG_SYS_NAND_HW_ECC to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_NAND_HW_ECC

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:05:38 -05:00
Tom Rini
60db32502c Convert CONFIG_SYS_NAND_HW_ECC_OOBFIRST to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_NAND_HW_ECC_OOBFIRST

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:05:38 -05:00
Tom Rini
50493dd1f9 Remove unused symbols
This commit removes the following unused symbols:
   CONFIG_SYS_NAND_DDR_LAW
   CONFIG_SYS_NAND_ECCSTEPS
   CONFIG_SYS_NAND_ECCTOTAL
   CONFIG_SYS_NAND_ENABLE_PIN_SPL
   CONFIG_SYS_NAND_MX7_GPMI_62_ECC_BYTES
   CONFIG_SYS_NAND_U_BOOT_RELOC_SP

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:05:38 -05:00
Tom Rini
715cce65b8 Convert CONFIG_SYS_NAND_DBW_8 et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_NAND_DBW_8
   CONFIG_SYS_NAND_DBW_16

Note that all instances of the code check for CONFIG_SYS_NAND_DBW_16
being defined, and then "else" to CONFIG_SYS_NAND_DBW_8 whereas all of
the configs set CONFIG_SYS_NAND_DBW_8. So we introduce
CONFIG_SYS_NAND_DBW_16 as an option.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:05:38 -05:00
Viacheslav Mitrofanov
eeb0a2c693 net: ping6: Add ping6 command
Implement ping6 command to ping hosts using IPv6. It works the same way as
an ordinary ping command. There is no ICMP request so it is not possible
to ping our host. This patch adds options in Kconfig and Makefile to
build ping6 command.

Series-changes: 3
- Added structures and functions descriptions
- Added to ping6_receive() return value instead of void

Series-changes: 4
- Fixed structures and functions description style

Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 12:47:16 -05:00
Viacheslav Mitrofanov
1feb697830 net: ipv6: Add implementation of main IPv6 functions
Functions that were exposed in "net: ipv6: Add IPv6 basic primitives"
had only empty implementations and were exposed as API for futher
patches. This patch add implementation of these functions. Main
functions are: net_ip6_handler() - IPv6 packet handler for incoming
packets; net_send_udp_packet6() - make up and send an UDP packet;
csum_ipv6_magic() - compute checksum of IPv6 "psuedo-header" per RFC2460
section 8.1; ip6_addr_in_subnet() - check if an address is in our
subnet. Other functions are auxiliary.

Series-changes: 3
- Added comments
- Fixed style problems
- Fixed return codes instead of -1

Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 12:47:16 -05:00
Viacheslav Mitrofanov
2f7f2f2aa9 net: ipv6: Add string_to_ip6 converter
This functions is used as a converter from IPv6 address string notation
to struct ip6_addr that is used everywhere in IPv6 implementation. For
example it is used to parse and convert IPv6 address from tftpboot
command. Conversion algorithm uses two passes, first to verify syntax and
locate colons and second pass to read the address. In case of valid IPv6
address it returns 0.

Examples of valid strings:
	2001:db8::0:1234:1
	2001:0db8:0000:0000:0000:0000:1234:0001
	::1
	::ffff:192.168.1.1

Examples of invalid strings
	2001:db8::0::0          (:: can only appear once)
	2001:db8:192.168.1.1::1 (v4 part can only appear at the end)
	192.168.1.1             (we don't implicity map v4)

Series-changes: 3
- Added function description
- Added length parameter to string_to_ip6()

Series-changes: 4
- Fixed function description style

Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 12:47:16 -05:00
Viacheslav Mitrofanov
c6610e1d90 net: ipv6: Add Neighbor Discovery Protocol (NDP)
Implement basic of NDP. It doesn't include such things as Router
Solicitation, Router Advertisement and Redirect. It just has Neighbor
Solicitation and Neighbor Advertisement. Only these two features are used
in u-boot IPv6. Implementation of some NDP functions uses API that was
exposed in "net: ipv6: Add IPv6 basic primitives".

Also this patch inlcudes update in Makefile to build NDP.

Series-changes: 3
- Added structures and functions descriptions
- Fixed style problems

Series-changes: 4
- Fixed structures and functions description style

Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 12:47:16 -05:00
Viacheslav Mitrofanov
1dfa4ef14d net: ipv6: Add callbacks declarations to get access to IPv6 variables
Set up callbacks for main IPv6 variables ip6add, serverip6, gatewayip6
and set options to them in flag file. These variables are often set up by
users.

Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 12:47:16 -05:00
Viacheslav Mitrofanov
33b5066a59 net: ipv6: Add IPv6 basic primitives
This patch is a collection of basic primitives that are prerequisite for
further IPv6 implementation.

There are structures definition such as IPv6 header, UDP header
(for TFTP), ICMPv6 header. There are auxiliary defines such as protocol
codes, padding, struct size and etc. Also here are functions prototypes
and its empty implementation that will be used as API for further patches.
Here are variables declaration such as IPv6 address of our host,
gateway, ipv6 server.

Series-changes: 3
- Added functions and structures descriptions
- Removed enums ND_OPT_*. It will be moved into further patches
- Substituted -1 for error codes

Series-changes: 4
- Changed functions and structures description style

Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 12:47:15 -05:00
Masahisa Kojima
3ac026ae46 efi_loader: utility function to check the variable name is "Boot####"
Some commands need to enumerate the existing UEFI load
option variable("Boot####"). This commit transfers some code
from cmd/efidebug.c to lib/efi_loder/, then exposes
efi_varname_is_load_option() function to check whether
the UEFI variable name is "Boot####".

Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2022-12-02 19:17:25 +01:00
Tim Harvey
5e6c069b2c phy: add driver for Intel XWAY PHY
Add a driver for the Intel XWAY GbE PHY:
 - configure RGMII using dt phy-mode and standard delay properties
 - use genphy_config

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-11-28 13:06:40 -05:00
Ying-Chun Liu (PaulLiu)
cfbae48219 net: Add wget application
This commit adds a simple wget command that can download files
from http server.

The command syntax is
wget ${loadaddr} <path of the file from server>

Signed-off-by: Duncan Hare <DuncanCHare@yahoo.com>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2022-11-28 13:06:39 -05:00
Ying-Chun Liu (PaulLiu)
a3bf193bf4 net: Add TCP protocol
Currently file transfers are done using tftp or NFS both
over udp. This requires a request to be sent from client
(u-boot) to the boot server.

The current standard is TCP with selective acknowledgment.

Signed-off-by: Duncan Hare <DH@Synoia.com>
Signed-off-by: Duncan Hare <DuncanCHare@yahoo.com>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2022-11-28 13:06:39 -05:00
Joel Stanley
3167b4d722 liteeth: LiteX Ethernet device
LiteX is a soft system-on-chip that targets FPGAs. LiteETH is a basic
network device that is commonly used in LiteX designs.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2022-11-28 10:25:17 -05:00
Tom Rini
d5d9f32579 - Implement setbrg op to meson serial device
- Re-add the old PHY reset binding for nanopi-k2
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAmN9DUIACgkQd9zb2sjI
 SdE1zBAAhTdTj1XXUhYRTG78UmcGEvm0Xz8om/Ej9dnIOZiZ1BvhU9XkLF1/qE4T
 0Z0rmhHtFETB7G+TiToHncUqtH5F6R8hSB2+RaChQtTjLmAeYquUFJva5ysFlnhp
 SkwS4fHx7WwEK2/ZD/FlXCWJE98Q1NdsJmIGDvPc6OwIMLlo2IA9C+Ct0ZLHQf7p
 ipgppxVZrqD0qxosPGRraUE2O2MvZRQu3pKdn4BAbZv4X+HrwI7+rv0zyAPRZBUA
 qJjOfpgzqDUqSGgSdGvqHIDbpm3PfzttDjr3W3PnVl3tYFjOXDekdGpQTV+Uvhy2
 1LCpLNYGShInmVrl5X3UGpGzPLodNTfCrz7kqc689nohoyR+/og4jpvctkH5jpek
 Vwi2uTjTHXDqgl6J7S1mExY0x17IR2cfpH5HBSZEmpmuKX53KZHFe1Qbd6QOyBK2
 SUUJO3mQ6zEoMGMTv+XrnBo9hwNNJTh02O1IqQypYxWnSodmAYZ9VYhK3iCx5pXp
 hBfnRzwA63DKvzS5r3IjzubKjDCyWnL4S9Gd5VczcAwwJlgddSgv6+aZd2qJpiVK
 YafUxeR0sCYVs9ccD7WY7Wkb0NivND0BevdEjNEri3KDAlsZuzkbYACHDE3HYzp+
 8pHUrbpxsuxd7MDUiHUTCALwbv5mFDtCfq9S/nCTlmS0OB3aEjY=
 =yEaP
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20221122' of https://source.denx.de/u-boot/custodians/u-boot-amlogic

- Implement setbrg op to meson serial device
- Re-add the old PHY reset binding for nanopi-k2
2022-11-23 10:05:26 -05:00
Sughosh Ganu
0524bfc297 sandbox: Move the capsule GUID declarations to board file
The sandbox config file is to be removed. Move the GUID declarations
needed for capsule update functionality to the board file where they
are used.

Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-22 15:13:35 -07:00
Simon Glass
88ff7cb1c8 image: Correct strncpy() warning with image_set_name()
gcc 12 seems to warn on strncpy() as a matter of course. Rewrite the code
a different way to do the same thing, to avoid the warning.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-11-22 15:13:34 -07:00
Edoardo Tomelleri
66006f86e8 arm: amlogic: add setbrg op to serial device
Implement setbrg in amlogic/meson serial device with driver model
similar to how the meson_uart.c driver does it in Linux. Also
configure (probe) the serial device with the new reg5 register.

Signed-off-by: Edoardo Tomelleri <e.tomell@gmail.com>
Link: https://lore.kernel.org/r/20220918161701.572814-1-e.tomell@gmail.com
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2022-11-22 18:53:21 +01:00
Tom Rini
521277ec15 Xilinx changes for v2023.01-rc3
microblaze:
 - Enable 32 bit addressing mode for SPIs
 
 zynq:
 - Minor DT fixes (PL clock enabling)
 
 zynqmp:
 - Disable watchdog by default
 - Remove unused xlnx,eeprom chosen support
 - Add missing symlink for vck190 SC revB
 - Use mdio bus with ethernet-phy-id description
 
 versal:
 - Add mini qspi/ospi configuration
 
 versal-net:
 - Add soc driver
 - Fix Kconfig entry for SOC
 - Fix loading address location for MINI configuration
 - Disable LMB for mini configuration
 
 net:
 - Fix ethernet-phy-id usage in the code
 
 pinctrl:
 - Revert high impedance/output enable support
 
 timer:
 - Fix timer relocation for Microblaze
 - Fix timer wrap in 32bit Xilinx timer driver
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCY3zfWQAKCRDKSWXLKUoM
 IRjpAJ4pETCmZ31k2itaK9VBtTzog/bP5QCfU9gJDb+TSWtZSwGzXLuy7Bq+ZkU=
 =29kc
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2023.01-rc3' of https://source.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx changes for v2023.01-rc3

microblaze:
- Enable 32 bit addressing mode for SPIs

zynq:
- Minor DT fixes (PL clock enabling)

zynqmp:
- Disable watchdog by default
- Remove unused xlnx,eeprom chosen support
- Add missing symlink for vck190 SC revB
- Use mdio bus with ethernet-phy-id description

versal:
- Add mini qspi/ospi configuration

versal-net:
- Add soc driver
- Fix Kconfig entry for SOC
- Fix loading address location for MINI configuration
- Disable LMB for mini configuration

net:
- Fix ethernet-phy-id usage in the code

pinctrl:
- Revert high impedance/output enable support

timer:
- Fix timer relocation for Microblaze
- Fix timer wrap in 32bit Xilinx timer driver
2022-11-22 12:33:48 -05:00
Ovidiu Panait
1e766a04c7 timer-uclass: add timer_get_ops() macro
Align timer uclass with the other subsystems and provide a timer_get_ops()
convenience macro.

Using this instead of the generic device_get_ops() also prevents
-Wdiscarded-qualifiers warnings when used with non-const variables.

Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Link: https://lore.kernel.org/r/20221012053656.1492457-1-ovpanait@gmail.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-11-22 15:02:07 +01:00
Tom Rini
536c642ffe Pull request for efi-2023-01-rc2-2
UEFI:
 
 * add UEFI Secure Boot Key enrollment interface to eficonfig command
 * fix buffer underflow in FatToStr() implementation
 -----BEGIN PGP SIGNATURE-----
 
 iQJWBAABCABAFiEEK7wKXt3/btL6/yA+hO4vgnE3U0sFAmN8zgoiHGhlaW5yaWNo
 LnNjaHVjaGFyZHRAY2Fub25pY2FsLmNvbQAKCRCE7i+CcTdTS8UwD/93S4Kgy6mE
 /Jlkp3YKGheBDDGvRyr9bkcGm0h4qheBYyXG1vbNQU2hDCfVSik174CCng234Kyv
 ssiy52KpkScl9vOD55MTa5iBkxEmOw6/CwBla7tSWdoGvv5JwB9adjJXNqX4Gr/B
 0vCagjk2qo3Jc52TvPXNBNrI5pegdzhx1ysSTp72sskdrqLe7NrH3/O1+g+Cl81Q
 kzXm0KCXZPelyXpT1mHOzyKTQtV+WRuxy27qxCtHQO4D/dijX5n/2tmLj77hEPKL
 2A9B/fO+G+2/KTGY0qG7aq7PjJFKHeEo/EXfuiRofg0Ys0kL2uEzJr36s4eTjJfc
 nrD9V2O8d2FhhRrOXnTqQGHKHktLimkZzM3XkeHZBTQxGhxOl6pusEhI/fgq+jCN
 hJ4psa2F1ygr6jYFg+xGX04jWdbZ8HWna6kZwcD+nR1K1epSKMhMc9gRlHnWx7B3
 FalH56KQR5AEz/Jb9wjG+4LoiVj0Yi8iyaiOBEQrkkooEsJk/IsdpGs/h2Li5bcQ
 nZ6+6fpprGqGxy8X0ynUOWvTjHmh89Agcw0uhjY1yR5LKZlWVz9KqWo4Mc0pzs/q
 cVcwfoN/eG26m3FShtQdTjg8Zpb/Tug0Hcsitgi6Dr83gLMv1t1X8GhdIR6M1n5z
 tQfciN7fRXGy1wgtQdF/+I6DATNr3apsdA==
 =AhXz
 -----END PGP SIGNATURE-----

Merge tag 'efi-2023-01-rc2-2' of https://source.denx.de/u-boot/custodians/u-boot-efi

Pull request for efi-2023-01-rc2-2

UEFI:

* add UEFI Secure Boot Key enrollment interface to eficonfig command
* fix buffer underflow in FatToStr() implementation
2022-11-22 08:30:53 -05:00
Masahisa Kojima
c3b5af63d1 eficonfig: add UEFI Secure Boot Key enrollment interface
This commit adds the menu-driven UEFI Secure Boot Key
enrollment interface. User can enroll PK, KEK, db
and dbx by selecting file.
Only the signed EFI Signature List(s) with an authenticated
header, typically '.auth' file, is accepted.

To clear the PK, KEK, db and dbx, user needs to enroll the null key
signed by PK or KEK.

Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2022-11-22 12:00:45 +01:00
Masahisa Kojima
d656611310 eficonfig: expose eficonfig_create_device_path()
Following commits are adding support for UEFI variable management
via the eficonfig menu. Those functions needs to use
eficonfig_create_device_path() to construct the full device path
from device path of the volume and file path, so move it
out of their static declarations.

Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
2022-11-22 12:00:44 +01:00
Masahisa Kojima
8961e93e16 eficonfig: expose append entry function
Following commits are adding support for UEFI variable management
via the eficonfig menu. Those functions needs to use
append_entry() and append_quit_entry() to construct the
menu, so move them out of their static declarations.

Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2022-11-22 12:00:44 +01:00
Masahisa Kojima
a84040ab46 eficonfig: refactor file selection handling
eficonfig_select_file_handler() is commonly used to select the
file. eficonfig_display_select_file_option() adds an additional
menu to clear the selected file.
eficonfig_display_select_file_option() is not always necessary
for the file selection process, so it must be outside of
eficonfig_select_file_handler().

This commit also renames the following functions to avoid confusion.
 eficonfig_select_file_handler() -> eficonfig_process_select_file()
 eficonfig_select_file() -> eficonfig_show_file_selection()
 eficonfig_display_select_file_option() -> eficonfig_process_show_file_option()

Finally, test_eficonfig.py need to be updated to get aligned with
the above modification.

Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2022-11-22 12:00:44 +01:00
Heinrich Schuchardt
caf29d1e64 efi_selftest: unsigned char parameter for efi_st_strcmp_16_8()
Use unsigned char for the parameter of efi_st_strcmp_16_8. This allows
comparing characters 0x80 - 0xff.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-11-22 11:54:30 +01:00
Stefan Roese
5cbd029539 watchdog: Drop GD_FLG_WDT_READY as it's not used any more
Since commit c2fd0ca1a8
("watchdog: Integrate watchdog triggering into the cyclic framework")
GD_FLG_WDT_READY has become write-only. This patch now removes this
flag completely.

The vacant spot in gd_flags is filled with the newly introduced
GD_FLG_CYCLIC_RUNNING flag.

Suggested-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Stefan Roese <sr@denx.de>
2022-11-22 08:56:26 +01:00
Pali Rohár
9c41c06069 Nokia RX-51: Do not overwrite standard $loadaddr variable
Instead of overwriting $loadaddr variable, use custom temporary
$fileloadaddr variable. So scripts can access default/original address
stored in $loadaddr at build time.

Signed-off-by: Pali Rohár <pali@kernel.org>
2022-11-21 09:23:00 -05:00
Pali Rohár
2827c2f07d Fix usage of CONFIG_PREBOOT
Due to usage of PREBOOT in Kconfig, macro CONFIG_PREBOOT is always defined
when CONFIG_USE_PREBOOT is enabled. In case CONFIG_PREBOOT is not
explicitly enabled it is set to empty C string and therefore
'#ifdef CONFIG_PREBOOT' guard does not work. Fix this issue by introducing
a new Kconfig symbol PREBOOT_DEFINED which cause to define new C macro
CONFIG_PREBOOT_DEFINED only when CONFIG_PREBOOT is really defined.

Change usage of '#ifdef CONFIG_PREBOOT' by '#ifdef CONFIG_USE_PREBOOT' for
code which checks if preboot code would be called and by
'#ifdef CONFIG_PREBOOT_DEFINED' for defining preboot code.

Signed-off-by: Pali Rohár <pali@kernel.org>
2022-11-21 09:23:00 -05:00
Tom Rini
bebb393b34 Pull request for efi-2023-01-rc2
Documentation:
 
 * fix building with Sphinx 5.0+
 * man-pages for cmp and bootd commands
 
 UEFI:
 
 * Avoid unaligned access in efi_file_from_path()
 * More bug fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAmN0od4ACgkQxIHbvCwF
 GsTLVA/+Ign2/NPOeFfzvWE+9CRhZgAMDqYB0NYsPc1q/xWDNYwn/qt8s52m/TDX
 HtlWKgH8dZ7DGP4TN9pTYRNrkQeNF60mGAvW2zUQJjh5y801f4v0VZz2O2SqDU3W
 69K33nMktL2ScD+ZuvusN4HwxHnE8xuHefM4Wqrm6MfWFiOsuiq1k6zy45+5J6Lt
 ZFQWoegkEUsQ94JrQjUqyVDM5gH9f2fuiJuvGRb8hhHJLznY5HI6Kt+Nv/ZxjRZX
 nWX0CE4w3h2NXsr7X57WJ83VgOtzyFEprjVD973r0osmvGibjEBcWSWLN40bKESx
 7ajWzdIhs5RS8iikpD7il8lEfDh/aK0Z1+MwyHZR1cMTHqSj1WQ53OtlNkumkHkW
 C+53BKjyMgQHP0lVIznBncQBLS8NIP15x5FH9s0JthYO248FwBo7zgzSOY3qRDG+
 38+SIl5PnUAmITptQljEkmOaE97QFseS366mINH2kYu06W5WsQX75YZByf2WQ9lm
 b6GSyfCjbAXo041GCIsgJDjvMXmqi68P16O5VKxzcAhkTXh3Cel5BZqvrje/6U1o
 48/0D2l178FmHeeis5Idmu4Gbd85Uy4ex8kNvKjfk9Oskf0Mwvh37dXYzr22P3OY
 ONjZkmhmTnsy14InLk9s+w8++NTpanWrjeUs940xXJeGQpg7G68=
 =rXaa
 -----END PGP SIGNATURE-----

Merge tag 'efi-2023-01-rc2' of https://source.denx.de/u-boot/custodians/u-boot-efi

Pull request for efi-2023-01-rc2

Documentation:

* fix building with Sphinx 5.0+
* man-pages for cmp and bootd commands

UEFI:

* Avoid unaligned access in efi_file_from_path()
* More bug fixes
2022-11-16 11:08:51 -05:00
Heinrich Schuchardt
dd706c83be sandbox: fix documentation of struct host_ops
The documentation of struct host_ops should be Sphinx compliant.

Fixes: 9bd1aa8af2 ("dm: sandbox: Create a new HOST uclass")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-11-16 08:34:06 +01:00
Heinrich Schuchardt
a8a0fc4628 doc: fix documentation of enum gd_flags
Correct GD_FLG_CYCLIC_RUNNING documentation to match Sphinx style.

Fixes: d7de5ef629 ("cyclic: use a flag in gd->flags for recursion protection")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-11-16 08:34:06 +01:00
Conor Dooley
540d02217f dt-bindings: clk: add missing clk ids for microchip mpfs
When this binding header was initally upstreamed, the PLL clocking the
microprocessor subsystem (MSS) and the RTC reference clocks were
omitted. Add them now, matching the IDs used in Linux.

Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Padmarao Begari <padmarao.begari@microchip.com>
2022-11-15 15:37:17 +08:00
Tom Rini
c4ee4fe92e For 2022.01
-----------
 
 CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/14083
 
 - Fix UART
 - moved to binman (MX8 boards)
 - Toradex: sync DTS with Linux
 - Gateworks: fixes
 - New boards : MSC SM2S iMX8MP
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCY3IX9A8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76a1dQCfTS1TpBF/Sjj0htkhw88AI+3x6UIAni5w6FmV
 bXA7Ymykew4cCkSRvesZ
 =OdkN
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20221114' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

For 2022.01
-----------

CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/14083

- Fix UART
- moved to binman (MX8 boards)
- Toradex: sync DTS with Linux
- Gateworks: fixes
- New boards : MSC SM2S iMX8MP
2022-11-14 09:33:36 -05:00
Tom Rini
0cbeed4f66 Merge branch '2022-11-10-symbol-migrations'
- Migrate a number of CONFIG symbols to Kconfig and start migrating some
  symbol families from CONFIG to the CFG namespace.
2022-11-10 10:09:40 -05:00
Tom Rini
6cc04547cb global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace
Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10 10:08:55 -05:00
Tom Rini
5155207ae1 global: Migrate CONFIG_SYS_MPC8* symbols to the CFG_SYS namespace
Migrate all of COFIG_SYS_MPC* to the CFG_SYS namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-11-10 10:08:55 -05:00
Tom Rini
d236210c11 Convert CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10 10:08:55 -05:00
Tom Rini
8c778f7834 Convert CONFIG_SYS_NONCACHED_MEMORY to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_NONCACHED_MEMORY

To do this we introduce CONFIG_SYS_HAS_NONCACHED_MEMORY as a bool to
gate if we are going to have noncached_... functions available and then
continue to use CONFIG_SYS_NONCACHED_MEMORY to store the size of said
cache. We make this new option depend on both the architectures which
implement support and the drivers which make use of it.

Cc: Tom Warren <twarren@nvidia.com>
Cc: Mingming lee <mingming.lee@mediatek.com>
Cc: "Ying-Chun Liu (PaulLiu)" <paul.liu@linaro.org>
Cc: Alban Bedel <alban.bedel@avionic-design.de>
Cc: Stephen Warren <swarren@nvidia.com>
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Cc: Allen Martin <amartin@nvidia.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10 10:08:55 -05:00
Tom Rini
08574ed339 Convert CONFIG_SYS_MONITOR_LEN to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_MONITOR_LEN

To do this, we set a default of 0 for everyone because there are a
number of cases where we define CONFIG_SYS_MONITOR_LEN but the only
impact is that we set TOTAL_MALLOC_LEN to be CONFIG_SYS_MALLOC_LEN +
CONFIG_ENV_SIZE, so we must continue to allow all boards to set this
value. Update the SPL code to use 200 KB as the default raw U-Boot size
directly, if we don't have a real CONFIG_SYS_MONITOR_LEN value.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10 10:08:55 -05:00
Tom Rini
9ba938e744 Convert CONFIG_SYS_MMC_MAX_DEVICE to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_MMC_MAX_DEVICE

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2022-11-10 10:08:55 -05:00
Tom Rini
75fc79e530 Convert CONFIG_SYS_MMC_MAX_BLK_COUNT to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_MMC_MAX_BLK_COUNT

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2022-11-10 10:08:55 -05:00
Tom Rini
a918df21f0 Convert CONFIG_SYS_MAX_NAND_DEVICE to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_MAX_NAND_DEVICE

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10 10:08:54 -05:00
Tom Rini
e28e0f47f3 rtc: Remove unused drivers
These drivers are not enabled anywhere, remove them.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10 09:45:54 -05:00
Tom Rini
2c8d04dd17 Convert CONFIG_SYS_LOADS_BAUD_CHANGE et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_LOADS_BAUD_CHANGE
   CONFIG_LOADS_ECHO

As part of this, we move CMD_SAVES to be after CMD_LOADS as they are
logically related (load or save an s-record format file) and this makes
grouping of CONFIG_SYS_LOADS_BAUD_CHANGE easier.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10 09:45:54 -05:00
Tom Rini
b85d75951f powerpc: Migrate SYS_L3_SIZE to Kconfig
Introduce three options, one for each observed L3 cache size, and have
the size select'd as needed.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10 09:45:54 -05:00
Tom Rini
22a2283f2d powerpc: Migrate SYS_L2_SIZE to Kconfig
Introduce two options, one for each observed L2 cache size, and have the
size select'd as needed.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10 09:45:54 -05:00
Tom Rini
e020b974ce Remove unused symbols CONFIG_SYS_JFFS2_FIRST_BANK et al
This removes the following symbols:
   CONFIG_RTC_MCFRRTC
   CONFIG_SYS_JFFS2_FIRST_BANK
   CONFIG_SYS_JFFS2_FIRST_SECTOR
   CONFIG_SYS_JFFS2_NUM_BANKS
   CONFIG_SYS_LBC_CACHE_BASE
   CONFIG_SYS_LIME_SIZE
   CONFIG_SYS_MAMR
   CONFIG_SYS_MCFRRTC_BASE
   CONFIG_SYS_MONITOR_SEC

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10 09:45:54 -05:00
Tom Rini
c56289ddaf Convert CONFIG_SYS_INTERLAKEN et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_INTERLAKEN
   CONFIG_SYS_ISA_IO
   CONFIG_SYS_ISA_IO_BASE_ADDRESS

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10 09:45:54 -05:00
Tom Rini
14a5d3b50e Remove dead code
This header is unreferenced, remove.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10 09:45:53 -05:00
Tom Rini
d3d0b5bb62 Convert CONFIG_SYS_INIT_RAM_LOCK to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_INIT_RAM_LOCK

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10 09:45:53 -05:00
Tom Rini
9244b2fda9 Convert CONFIG_SYS_I2C_INIT_BOARD to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_I2C_INIT_BOARD

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10 09:45:53 -05:00
Adam Ford
899f291bd1 configs: imx8mn_beacon: Re-align memory to standard imx8mn settings
The imx8mn_beacon board does not use the same memory map as the reference
design from NXP or other imx8mn boards.  As such, memory is more limited
in SPL.

Moving SPL_BSS_START_ADDR and SPL_STACK to default locations increases
the amount of available meory for the SPL stack.  Doing this allows
the board to no longer define CONFIG_MALLOC_F_ADDR.

Since SYS_LOAD_ADDR also does not align with other boards, move it too.

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2022-11-08 17:35:00 +01:00
Marcel Ziswiler
dbd5ca2e46 imx8mm: synchronise device tree with linux
Synchronise device tree with linux v6.1-rc3.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-By: Tim Harvey <tharvey@gateworks.com> #imx8m{m,n,p}-venice-*
2022-11-08 17:35:00 +01:00
Marcel Ziswiler
f067b59743 imx8mn: synchronise device tree with linux
Synchronise device tree with linux v6.1-rc3.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-By: Tim Harvey <tharvey@gateworks.com> #imx8m{m,n,p}-venice-*
2022-11-08 17:35:00 +01:00
Marcel Ziswiler
0b42fdca2d imx8mp: synchronise device tree with linux
Synchronise device tree with linux v6.1-rc3.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-By: Tim Harvey <tharvey@gateworks.com> #imx8m{m,n,p}-venice-*
2022-11-08 17:35:00 +01:00
Marcel Ziswiler
cb9b70fd2f imx8mq: synchronise device tree with linux
Synchronise device tree with linux v6.1-rc3.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-11-08 17:35:00 +01:00
Marcel Ziswiler
ed7bda5710 imx8ulp: synchronise device tree with linux
Synchronise device tree with linux v6.1-rc3.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-11-08 17:35:00 +01:00
Marcel Ziswiler
62f96866d3 imxrt1050: synchronise device tree with linux
Synchronise device tree with linux v6.1-rc3.

Note: Nowadays, the intent is for them regular device trees to just be
synchronised from them Linux kernel device trees and any and all U-Boot
specific changes need to go into the -u-boot.dtsi device tree include
files which BTW get included automatically by the U-Boot build system.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-11-08 17:35:00 +01:00
Tim Harvey
765f6f1895 imx: imx8m{m,n,p}_venice: migrate to CONFIG_EXTRA_ENV_TEXT
Move the majority of the environment from the board headers to
a separate text file.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-11-08 17:35:00 +01:00
Tim Harvey
e9e03e7984 configs: imx8m{m, n}_venice: remove unneeded CONFIG_FEC_MXC_PHYADDR
The IMX8M based Venice boards all have device-tree fec nodes that
use proper dt with a phy-handle pointing to a phy with reg assigned
to the proper phy address.

There is no need to keep using the CONFIG_FEC_MXC_PHYADDR hack when
a proper dt is used - remove it.

This was previously done in commit 400eebf10d
("configs: imx8m{m, n}_venice: remove unneeded CONFIG_FEC_MXC_PHYADDR")
but got clobbered by commit 6889412ad5
("Convert CONFIG_SYS_BARGSIZE to Kconfig")

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-11-08 17:35:00 +01:00
Tim Harvey
37fa34f727 configs: imx8mn_venice.h: remove unused ifdef
remove unused ifdef left behind after commit ca3369df71
("configs: drop CONFIG_SPL_ABORT_ON_RAW_IMAGE")

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-11-08 17:35:00 +01:00
Tim Harvey
9414097ab7 configs: imx8mn_venice: fix include header protection
Fix typo in the include header protection.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-11-08 17:35:00 +01:00
Martyn Welch
c8f3402ad2 arm: imx8mp: Initial MSC SM2S iMX8MP support
Add support for the MSC SM2S-IMX8PLUS SMARC Module. Tested in conjunction
with the MSC SM2-MB-EP1 Mini-ITX Carrier Board.

Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
2022-11-08 17:34:47 +01:00
Simon Glass
952018117a dm: sandbox: Switch over to using the new host uclass
Update the sandbox implementation to use UCLASS_HOST and adjust all
the pieces to continue to work:

- Update the 'host' command to use the new API
- Replace various uses of UCLASS_ROOT with UCLASS_HOST
- Disable test_eficonfig since it doesn't work (this should have a unit
  test to allow this to be debugged)
- Update the blk test to use the new API
- Drop the old header file

Unfortunately it does not seem to be possible to split this change up
further.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-11-07 16:24:30 -07:00
Simon Glass
9bd1aa8af2 dm: sandbox: Create a new HOST uclass
Sandbox supports block devices which can access files on the host machine.
At present there is no uclass for this. The devices are attached to the
root devic. The block-device type is therefore set to UCLASS_ROOT which
is confusing.

Block devices should be attached to a 'media' device instead, something
which handles access to the actual media and provides the block driver
for the block device.

Create a new uclass to handle this. It supports two operations, to attach
and detach a file on the host machine.

For now this is not fully plumbed in.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-11-07 16:24:30 -07:00
Simon Glass
41e751091d dm: blk: Tidy up obtaining a block device from its parent
This function now finds its block-device child by looking for a child
device of the correct uclass (UCLASS_BLK). It cannot produce a device of
any other type, so drop the superfluous check.

Provide a version which does not probe the device, since that is often
needed when setting up the device's platdata.

Also fix up the function's comment.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-11-07 16:24:30 -07:00
Simon Glass
d1b4659570 test: Add a way to detect a test that breaks another
When running unit tests, some may have side effects which cause a
subsequent test to break. This can sometimes be seen when using 'ut dm'
or similar.

Add a new argument which allows a particular (failing) test to be run
immediately after a certain number of tests have run. This allows the
test causing the failure to be determined.

Update the documentation also.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-11-07 16:24:30 -07:00
Simon Glass
5ea894ac42 dm: test: Clear the block cache after running a test
Some tests access data in block devices and so cause the cache to fill
up. This results in memory being allocated.

Some tests check the malloc usage at the beginning and then again at the
end, to ensure there is no memory leak caused by the test. The block cache
makes this difficult, since the any test may cause entries to be allocated
or even freed, if the cache becomes full.

It is simpler to clear the block cache after each test. This ensures that
it will not introduce noise in tests which check malloc usage.

Add the logic to clear the cache, using the existing blkcache_invalidate()
function. Drop the duplicate code at the same time.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-11-07 16:24:30 -07:00
Simon Glass
6ca4d5b96b sandbox: Add missing comments for os_alarm()
Add the documentation to avoid a warning with 'make htmldocs'.

Fixes: 10107efedd ("sandbox: add SIGALRM-based watchdog device")

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-11-07 16:24:30 -07:00
Simon Glass
ff1f0e414a dm: sandbox: Drop non-BLK code from host implementation
This is not used anymore. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-11-07 16:24:30 -07:00
Chris Packham
6cc8b5db40 arm: mvebu: Add RD-AC5X board
The RD-AC5X-32G16HVG6HLG-A0 development board main components and
features include:
* Main 12V/54V power supply
* 270 Gbps throughput packet processor on the main board
* DDR4:
  * SR1: 2GB DDR4 2400MT/S(1GB x 2 pcs ) with ECC(1GB x 1 pcs)
  * SR2: 4GB DDR4 2400MT/S(2GB x 2 pcs ) with ECC(2GB x 1 pcs)
  * PCB co-layout with 4GB device to support 8GB (Dual CS) requirement
* 16GB eMMC (Samsung KLMAG1JETD-B041006)
* 16MB SPI NOR(GD25Q127C)
* 32 x 1000 Base-T interfaces
* 16 x 2500 Base-T interfaces
  * SR1: 88E2540*4
  * SR2: 88E2580*1+88E2540*2
* Six (6) x 25G Base-R SFP28 interfaces
* One (1) x RJ-45 console connector, interfacing to the on board UART
* One (1) x USB Type-A connector, interfacing to the USB 2.0 port (0)
* One (1) x USB Type-mini B connector, interfacing to the USB 2.0 port (1)
* One (1) x RJ-45 1G Base-T Management port, interfacing to the host
  port (shared with PCIe) Connected to 88E1512 Gigabit Ethernet Phy
* One (1) x Oculink port, interfacing to the PCIe port for external CPU
  connection
* POE 802.3AT support on Port 1 ~ Port 32, 802.3BT support on Port 33 ~
  Port 48 (Microsemi PD69208T4, PD69208M or TI TPS2388,TPS23881
  solution)
* POE total power budget 780W
* LED interfaces per network port/POE
* LED interfaces (common) showing system status
* PTP TC mode Supported (Reserved M.2 connector to support BC mode)

Signed-off-by: Chris Packham <judge.packham@gmail.com>
2022-11-07 07:46:28 +01:00
Pali Rohár
87ac4b4b4c Makefile: Rename u-boot-spl.kwb to u-boot-with-spl.kwb
File name with pattern u-boot-spl* is used on all places except in kwb
image for binary with SPL-only code. Combined binary with both SPL and
proper U-Boot in other places has file name pattern u-boot-with-spl*.

Make it consistent also for kwb image and rename u-boot-spl.kwb to
u-boot-with-spl.kwb as this image contains both SPL and proper U-Boot code.

Also update documentation about file name changes.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-11-07 07:17:55 +01:00
Tom Rini
45fc699cc5 - MIPS: convert CONFIG_SYS_MIPS_TIMER_FREQ to Kconfig
- MIPS: mtmips: fix incorrectly converted default value for CONFIG_SPL_PAD_TO
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiQkHUH+J02LLC9InKPlOlyTyXBgFAmNjs4AACgkQKPlOlyTy
 XBg92w/9HWXb1g8z/hmAsieD20hMQTnfIo8m9XH6/0UIeqg7jlKkGtSML4WBbovA
 rgv0Ngzrt2nnhLfY1H5ZeWQ0CcEW04IY7ZdkJaFizbp9cq9KRGbxgFCiXFslNl7e
 3TxnjvHfdA5Bn+TiF9kN3NIqDKBPokU5xIcoxKi7oWxbtP9ZcwwuOc2EJTczxT58
 9raMhXiTrFSp0fVY4vg3XfxW47+aJ7LH1VCJ6iZGnhNfVy2LIGtjGFh1a9zY66mP
 IUWwGqlE1hzw3ywWDuCDfyKPz33wZze/FtNh0nnHOxCBzVbCvN6YKwO9pZp9ZjQq
 SkR0iamC5mEhUgI2aQtZ8ChspFaFwAx256nRB9Jc4W33qCJERm+s8o6mQH3QdyDC
 fqU8sYoiZWCOG/UtD0P489NtE9rc31FcmBIAt1EJfE399tXXoRhElP7kYFBWiA12
 1g7zcZvXOJHUfgAKFsuaqAkZ5Yhenj6WRj6Dplx8F+3jUgHZUxh6rwvC+ovYfnkT
 eNvRJWFlcdLyHGRGrCppF6i2HmVZmDRmaPrOZhazE303F/w72iEYnr2Un8fy/6EP
 BaCzQpHs1zct7ocq9I3aUxcAtrKI8VIdXpdpsmy0lhB2K2nsSslaAFGSDQE6FTCd
 IH1w9towmtoLemPxyV9pQ0l4TWUBy7t5gJ7G/TPKY0/KH7tY5Nw=
 =4Sbm
 -----END PGP SIGNATURE-----

Merge tag 'mips-pull-2022-11-03' of https://source.denx.de/u-boot/custodians/u-boot-mips

- MIPS: convert CONFIG_SYS_MIPS_TIMER_FREQ to Kconfig
- MIPS: mtmips: fix incorrectly converted default value for CONFIG_SPL_PAD_TO
2022-11-03 20:23:27 -04:00
Daniel Schwierzeck
a29491ade0 MIPS: convert CONFIG_SYS_MIPS_TIMER_FREQ to Kconfig
This converts the following to Kconfig:
    CONFIG_SYS_MIPS_TIMER_REQ

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-11-02 21:42:32 +01:00
Daniel Schwierzeck
ea24b0eacf MIPS: mscc: remove unused CPU_CLOCK_RATE
CPU_CLOCK_RATE is just used once for CONFIG_SYS_MIPS_TIMER_FREQ
which is migrated to Kconfig in the next patch.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-11-02 21:42:32 +01:00
Daniel Schwierzeck
e9dcd5b402 MIPS: remove CONFIG_SYS_MHZ
Resolve all uses of CONFIG_SYS_MHZ with the currently defined value.
Remove code which depends on CONFIG_SYS_MHZ but where no board configs
actually use that code.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-11-02 21:42:32 +01:00
Andre Przywara
44b7abf8dc highbank: switch to use the Arm SP804 DM_TIMER driver
So far the Calxeda machines were using the CONFIG_SYS_TIMER_* macros to
simply hardcode the address of the counter register of the SP804 timer.
This method is deprecated and scheduled for removal.

Use the newly introduced SP804 DM_TIMER driver to provide timer
functionality on Highbank and Midway machines. The base address and base
frequency are taken from the devicetree.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-11-02 13:58:17 -04:00
Rasmus Villemoes
50128aeb0f cyclic: get rid of cyclic_init()
Currently, we must call cyclic_init() at some point before
cyclic_register() becomes possible. That turns out to be somewhat
awkward, especially with SPL, and has resulted in a watchdog callback
not being registered, thus causing the board to prematurely reset.

We already rely on gd->cyclic reliably being set to NULL by the asm
code that clears all of gd. Now that the cyclic list is a hlist, and
thus an empty list is represented by a NULL head pointer, and struct
cyclic_drv has no other members, we can just as well drop a level of
indirection and put the hlist_head directly in struct
global_data. This doesn't increase the size of struct global_data,
gets rid of an early malloc(), and generates slightly smaller code.

But primarily, this avoids having to call cyclic_init() early; the cyclic
infrastructure is simply ready to register callbacks as soon as we
enter C code.

We can still end up with schedule() being called from asm very early,
so we still need to check that gd itself has been properly initialized
[*], but once it has, gd->cyclic_list is perfectly fine to access, and
will just be an empty list.

As for cyclic_uninit(), it was never really the opposite of
cyclic_init() since it didn't free the struct cyclic_drv nor set
gd->cyclic to NULL. Rename it to cyclic_unregister_all() and use that
in test/, and also insert a call at the end of the board_init_f
sequence so that gd->cyclic_list is a fresh empty list before we enter
board_init_r().

A small piece of ugliness is that I had to add a cast in
cyclic_get_list() to silence a "discards 'volatile' qualifier"
warning, but that is completely equivalent to the existing handling of
the uclass_root_s list_head member.

[*] I'm not really sure where we guarantee that the register used for
gd contains 0 until it gets explicitly initialized, but that must be
the case, otherwise testing gd for being NULL would not make much sense.

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Stefan Roese <sr@denx.de>
Tested-by: Stefan Roese <sr@denx.de>
Tested-by: Tim Harvey <tharvey@gateworks.com> # imx8mm-venice-*
2022-11-02 08:42:03 +01:00
Rasmus Villemoes
2896839483 cyclic: switch to using hlist instead of list
A hlist is headed by just a single pointer, so can only be traversed
forwards, and insertions can only happen at the head (or before/after
an existing list member). But each list node still consists of two
pointers, so arbitrary elements can still be removed in O(1).

This is precisely what we need for the cyclic_list - we never need to
traverse it backwards, and the order the callbacks appear in the list
should really not matter.

One advantage, and the main reason for doing this switch, is that an
empty list is represented by a NULL head pointer, so unlike a
list_head, it does not need separate C code to initialize - a
memset(,0,) of the containing structure is sufficient.

This is mostly mechanical:

- The iterators are updated with an h prefix, and the type of the
  temporary variable changed to struct hlist_node*.

- Adding/removing is now just hlist_add_head (and not tail) and
  hlist_del().

- struct members and function return values updated.

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Stefan Roese <sr@denx.de>
Tested-by: Stefan Roese <sr@denx.de>
Tested-by: Tim Harvey <tharvey@gateworks.com> # imx8mm-venice-*
2022-11-02 08:41:55 +01:00
Rasmus Villemoes
2399b628f4 list.h: synchronize hlist_for_each_entry* iterators with linux
All the way back in 2013, the linux kernel updated the four
hlist_for_each_entry* iterators to require one less auxiliary
variable:

  commit b67bfe0d42cac56c512dd5da4b1b347a23f4b70a
  Author: Sasha Levin <sasha.levin@oracle.com>
  Date:   Wed Feb 27 17:06:00 2013 -0800

      hlist: drop the node parameter from iterators

Currently, there is only one "user" of any of these, namely in
fs/ubifs/super.c, but that actually uses the "new-style" form, and
is (obviously, or it wouldn't have built) inside #ifndef __UBOOT__.

Before adding actual users of these, import the version as of linux
v6.1-rc1, including the hlist_entry_safe() helper used by the new
versions.

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Stefan Roese <sr@denx.de>
Tested-by: Stefan Roese <sr@denx.de>
Tested-by: Tim Harvey <tharvey@gateworks.com> # imx8mm-venice-*
2022-11-02 08:41:49 +01:00
Rasmus Villemoes
6b84b1db2d cyclic: drop redundant cyclic_ready flag
We're already relying on gd->cyclic being NULL before cyclic_init() is
called - i.e., we're relying on all of gd being zeroed before entering
any C code. And when we do populate gd->cyclic, its ->cyclic_ready
member is automatically set to true. So we can actually just rely on
testing gd->cyclic itself.

The only wrinkle is that cyclic_uninit() actually did set
->cyclic_ready to false. However, since it doesn't free gd->cyclic,
the cyclic infrastructure is actually still ready (i.e., the list_head
is properly initialized as an empty list).

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Stefan Roese <sr@denx.de>
Tested-by: Stefan Roese <sr@denx.de>
Tested-by: Tim Harvey <tharvey@gateworks.com> # imx8mm-venice-*
2022-11-02 08:41:42 +01:00
Rasmus Villemoes
d7de5ef629 cyclic: use a flag in gd->flags for recursion protection
As a preparation for future patches, use a flag in gd->flags rather
than a separate member in (the singleton) struct cyclic_drv to keep
track of whether we're already inside cyclic_run().

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Stefan Roese <sr@denx.de>
Tested-by: Stefan Roese <sr@denx.de>
Tested-by: Tim Harvey <tharvey@gateworks.com> # imx8mm-venice-*
2022-11-02 08:41:20 +01:00
Sughosh Ganu
8679405241 FWU: Add support for the FWU Multi Bank Update feature
The FWU Multi Bank Update feature supports updating firmware images
to one of multiple sets(also called banks) of images. The firmware
images are clubbed together in banks, with the system booting images
from the active bank. Information on the images such as which bank
they belong to is stored as part of the metadata structure, which is
stored on the same storage media as the firmware images on a dedicated
partition.

At the time of update, the metadata is read to identify the bank to
which the images need to be flashed(update bank). On a successful
update, the metadata is modified to set the updated bank as active
bank to subsequently boot from.

Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2022-10-31 14:47:32 -04:00
Sughosh Ganu
7e9814cc6c FWU: Add boot time checks as highlighted by the FWU specification
The FWU Multi Bank Update specification requires the Update Agent to
carry out certain checks at the time of platform boot. The Update
Agent is the component which is responsible for updating the firmware
components and maintaining and keeping the metadata in sync.

The spec requires that the Update Agent perform the following checks
at the time of boot
* Sanity check of both the metadata copies maintained by the platform.
* Get the boot index passed to U-Boot by the prior stage bootloader
  and use this value for metadata bookkeeping.
* Check if the system is booting in Trial State. If the system boots
  in the Trial State for more than a specified number of boot counts,
  change the Active Bank to be booting the platform from.

Call these checks through the main loop event at the time of platform
boot.

Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2022-10-31 14:47:32 -04:00
Sughosh Ganu
467bad5e36 event: Add an event for main_loop
Add an event type EVT_MAIN_LOOP that can be used for registering
events that need to be run after the platform has been initialised and
before the main_loop function is called.

Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
2022-10-31 14:47:32 -04:00
Sughosh Ganu
95b5a7de30 FWU: STM32MP1: Add support to read boot index from backup register
The FWU Multi Bank Update feature allows the platform to boot the
firmware images from one of the partitions(banks). The first stage
bootloader(fsbl) passes the value of the boot index, i.e. the bank
from which the firmware images were booted from to U-Boot. On the
STM32MP157C-DK2 board, this value is passed through one of the SoC's
backup register. Add a function to read the boot index value from the
backup register.

Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
2022-10-31 14:47:32 -04:00
Sughosh Ganu
7d6e2c54b7 FWU: Add helper functions for accessing FWU metadata
Add weak functions for getting the update index value and dfu
alternate number needed for FWU Multi Bank update
functionality.

The current implementation for getting the update index value is for
platforms with 2 banks. If a platform supports more than 2 banks, it
can implement it's own function. The function to get the dfu alternate
number has been added for platforms with GPT partitioned storage
devices. Platforms with other storage partition scheme need to
implement their own function.

Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2022-10-31 14:47:32 -04:00
Sughosh Ganu
d70c4a0a20 stm32mp1: Add image information for capsule updates
Enabling capsule update functionality on the platform requires
populating information on the images that are to be updated using the
functionality. Do so for the DK2 board.

Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
2022-10-31 14:47:32 -04:00
Sughosh Ganu
554b38f7a5 FWU: Add FWU metadata access driver for GPT partitioned block devices
In the FWU Multi Bank Update feature, the information about the
updatable images is stored as part of the metadata, on a separate
partition. Add a driver for reading from and writing to the metadata
when the updatable images and the metadata are stored on a block
device which is formatted with GPT based partition scheme.

Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2022-10-31 14:47:32 -04:00
Sughosh Ganu
2eaedc9516 FWU: Add FWU metadata structure and driver for accessing metadata
In the FWU Multi Bank Update feature, the information about the
updatable images is stored as part of the metadata, which is stored on
a dedicated partition. Add the metadata structure, and a driver model
uclass which provides functions to access the metadata. These are
generic API's, and implementations can be added based on parameters
like how the metadata partition is accessed and what type of storage
device houses the metadata.

Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-10-31 14:47:32 -04:00
Simon Glass
7f3470bfaa vbe: Add a command to show the VBE state
Add a VBE comment which shows the current state. Currently this is just
the phases which booted via VBE.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-31 11:04:00 -04:00
Simon Glass
d8b7c34f98 vbe: Record which phases loaded using VBE
We expect VPL and SPL to load using VBE. Add a record of this so we can
check it in U-Boot proper.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-31 11:04:00 -04:00
Simon Glass
d2b22ae231 vbe: Support reading the next SPL phase via VBE
Add an SPL loader to obtain the next-phase binary from a FIT provided
by the VBE driver.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-31 11:03:18 -04:00
Simon Glass
70b26e4356 vbe: Support selecting operations by SPL phase
VBE supports booting firmware during the SPL phases, i.e. so that VPL can
start SPL and SPL can start U-Boot.

It also supports booting an OS, when in U-Boot.

As a first step towards these features, add functions to indicate the
current VBE phase. The firmware selection is done in VPL and the OS
selection is done in U-Boot proper.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-31 11:03:18 -04:00
Simon Glass
f1459c3657 sandbox: Support obtaining the next phase from an image
At present sandbox runs the next phase from discrete executables, so for
example u-boot-tpl runs u-boot-vpl to get to the next phase.

In some cases the phases are all built into a single firmware image, as is
done for real boards. Add support for this to sandbox.

Make it higher priority so that it takes precedence over the existing
method.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-31 11:03:18 -04:00
Simon Glass
bbe285c305 image: Allow loading a FIT image for a particular phase
Add support for filtering out FIT images by phase. Rather than adding yet
another argument to this already overloaded function, use a composite
value, where the phase is only added in if needed.

The FIT config is still selected (and verified) as normal, but the images
are selected based on the phase.

Tests for this come in a little later, as part of the updated VPL test.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-31 11:02:45 -04:00
Simon Glass
44ad35a0f6 image: Add the concept of a phase to FIT
We want to be able to mark an image as related to a phase, so we can
easily load all the images for SPL or for U-Boot proper.

Add this to the FIT specification, along with some access functions.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-31 11:02:44 -04:00
Simon Glass
830690d2ed sandbox: Generalise SPL booting
At present sandbox only supports jumping to a file, to get to the next
U-Boot phase. We want to support other methods, so update the code to
use an enum for the method. Also use the

Use board_boot_order() to set the order, so we can add more options.
Also add the MMC methods into the BOOT_DEVICE enum so that booting
from MMC can be supported.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-31 11:02:44 -04:00
Simon Glass
494e66d3a9 image: Move comment for fit_conf_find_compat()
Move this comment to the header file, where the APIs should be defined.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-31 11:02:44 -04:00
Simon Glass
2ff3db3a1c usb: Update the test to cover reading and writing
Add test coverage for blk_write() as well.

The blk_erase() is not tested for now as the USB stor interface does not
support erase.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-31 11:02:44 -04:00
Simon Glass
606b926f9d dm: blk: Add udevice functions
At present we have functions called blk_dread(), etc., which take a
struct blk_desc * to refer to the block device. Add some functions which
use udevice instead, since this is more in keeping with how driver model
is supposed to work.

Update one of the tests to use this.

Note that it would be nice to update the functions in disk-uclass.c to use
these new functions. However they are not quite the same. For example,
disk_blk_read() adds the partition offset to 'start' when calling the
cache read/fill functions, but does not with part_blk_read(), which does
the addition itself. So as designed the code is duplicated.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-31 11:02:44 -04:00
Simon Glass
76c839fcb4 disk: Rename block functions
Use the uclass type as the first part of the function name, to be
consistent with the methods in other block drivers.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-31 11:02:44 -04:00
Simon Glass
b190deb895 bootstd: Add a way to set up a bootflow
Add a function to init a bootflow, to reduce code duplication.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-31 11:02:44 -04:00
Simon Glass
cbd71fad6d test: Support tests which can only be run manually
At present we normally write tests either in Python or in C. But most
Python tests end up doing a lot of checks which would be better done in C.
Checks done in C are orders of magnitude faster and it is possible to get
full access to U-Boot's internal workings, rather than just relying on
the command line.

The model is to have a Python test set up some things and then use C code
(in a unit test) to check that they were done correctly. But we don't want
those checks to happen as part of normal test running, since each C unit
tests is dependent on the associate Python tests, so cannot run without
it.

To acheive this, add a new UT_TESTF_MANUAL flag to use with the C 'check'
tests, so that they can be skipped by default when the 'ut' command is
used. Require that tests have a name ending with '_norun', so that pytest
knows to skip them.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-31 11:02:44 -04:00
Simon Glass
1facaadea1 test: Report skippped tests
At present it is possible for a test to skip itself by returning -EAGAIN
but this is not recorded. An existing example is in test_pre_run() with
the "Console recording disabled" check.

Keep a track of skipped tests and report the total at the end.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2022-10-31 11:02:44 -04:00
Simon Glass
2b8d2ccdc9 spl: Use binman suffix allow symbols of any SPL etype
At present we use symbols for the u-boot-spl entry, but this is not always
what we want. For example, sandbox actually jumps to a u-boot-spl-elf
entry, since sandbox executables are ELF files.

We already handle this with U-Boot by using the '-any' suffix. Add it for
SPL as well.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-31 11:01:31 -04:00
Simon Glass
984639039f Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE
The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE
and this makes it imposible to use CONFIG_VAL().

Rename it to resolve this problem.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-31 11:01:31 -04:00
William Zhang
779a7b665f arm: bcmbca: remove bcm6753 support under CONFIG_ARCH_BCM6753
BCM6753 is essentially same as the main chip BCM6855 but with different
SKU number. Now that BCM6855 is supported under CONFIG_ARCH_BCMBCA and
CONFIG_BCM6855, remove the original ARCH_BCM6753 support and migrate its
configuration and dts settings. This includes:
- Remove the bcm96753ref board folder. It is replaced by the
generic bcmbca board folder.
- Merge the 6753.dtsi setting to the new 6855.dtsi file. Update
96753ref board dts with the new compatible string.
- Delete broadcom_bcm96763ref.h and merge its setting to the new
bcm96855.h file.
- Delete bcm96753ref_ram_defconfig and use a basic config version of
bcm96855_defconfig

Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-10-31 08:55:59 -04:00
William Zhang
62c0ae40bb arm: bcmbca: add bcm6855 SoC support under CONFIG_ARCH_BCMBCA
BCM6855 is a Broadcom ARM A7 based PON Gateway SoC. It is part of the
BCA (Broadband Carrier Access origin) chipset family. Like other
broadband SoC, this patch adds it under CONFIG_BCM6855 chip config and
CONFIG_ARCH_BCMBCA platform config.

This initial support includes a bare-bone implementation and dts with
CPU subsystem, memory and ARM PL101 uart. This SoC is supported in the
linux-next git repository so the dts and dtsi files are copied from linux.

The u-boot image can be loaded from flash or network to the entry point
address in the memory and boot from there to the console.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-10-31 08:55:59 -04:00
William Zhang
872308c6b1 arm: bcmbca: remove bcm6858 support under CONFIG_ARCH_BCM6858
Now that BCM6858 is supported under CONFIG_ARCH_BCMBCA and
CONFIG_BCM6858, remove the original ARCH_BCM6858 support and migrate its
configuration and dts settings. This includes:
- Remove the bcm968580xref board folder. It is replaced by the generic
bcmbca board folder.
- Update bcm968580xref board dts with the new compatible string.
- Delete broadcom_bcm968580xref.h and merge its setting to the new
bcm96858.h file.
- Remove bcm968580xref_ram_defconfig as a basic config version of
bcm96858_defconfig is now added.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-10-31 08:55:58 -04:00
William Zhang
b0e2b6abac arm: bcmbca: add bcm6858 SoC support under CONFIG_ARCH_BCMBCA
BCM6858 is a Broadcom B53 based PON Gateway SoC. It is part of the BCA
(Broadband Carrier Access origin) chipset family. Like other broadband
SoC, this patch adds it under CONFIG_BCM6858 chip config and
CONFIG_ARCH_BCMBCA platform config.

This initial support includes a bare-bone implementation and the
original dts is updated with the one from linux next git repository.

The u-boot image can be loaded from flash or network to the entry point
address in the memory and boot from there to the console.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-10-31 08:55:51 -04:00
William Zhang
fdf8f29dc7 arm: bcmbca: remove bcm68360 support under CONFIG_ARCH_BCM68360
BCM68360 is a variant within the BCM6856 chip family. Now that BCM6856
is supported under CONFIG_ARCH_BCMBCA and CONFIG_BCM6856, remove the
original ARCH_BCM68360 support and migrate its configuration and dts
settings. This includes:
  - Remove the bcm968360bg board folder. It is replaced by the generic
    bcmbca board folder.
  - Merge the 68360.dtsi setting to the new 6856.dtsi file. Update board
    dts with the new compatible string.
  - Merge broadcom_bcm968360bg.h setting to the new bcm96856.h file.
  - Remove bcm968360bg_ram_defconfig as a basic config version of
    bcm96856_defconfig is now added.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-10-31 08:55:50 -04:00
William Zhang
dc244ca33a arm: bcmbca: add bcm6856 SoC support under CONFIG_ARCH_BCMBCA
BCM6856 is a Broadcom B53 based PON Gateway SoC. It is part of the BCA
(Broadband Carrier Access origin) chipset family. Like other Broadband
SoC, this patch adds it under CONFIG_BCM6856 chip config and
CONFIG_ARCH_BCMBCA platform config.

This initial support includes a bare-bone implementation and dts with
CPU subsystem, memory and Broadcom uart. This SoC is supported in the
linux-next git repository so the dts and dtsi files are copied from
linux.

The u-boot image can be loaded from flash or network to the entry point
address in the memory and boot from there to the console.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-10-31 08:55:41 -04:00
William Zhang
07f97bde54 arm: bcmbca: remove bcm63158 support under CONFIG_ARCH_BCM63158
Now that BCM63158 is supported under CONFIG_ARCH_BCMBCA and
CONFIG_BCM63158, remove the original ARCH_BCM63158 support and migrate
configuration settings.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-10-31 08:55:40 -04:00
William Zhang
61546e7cda arm: bcmbca: add bcm63158 SoC support under CONFIG_ARCH_BCMBCA
BCM63158 is a Broadcom B53 based DSL Gateway SoC. It is part of the
BCA (Broadband Carrier Access origin) chipset family. Like other
Broadband SoC, this patch adds it under CONFIG_BCM63158 chip
config and CONFIG_ARCH_BCMBCA platform config.

This initial support includes a bare-bone implementation and dts with
CPU subsystem, memory and ARM PL011 uart. This SoC is supported in the
linux-next git repository so the dts and dtsi files are copied from
linux.

The u-boot image can be loaded from flash or network to the entry
point address in the memory and boot from there to the console.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-10-31 08:54:44 -04:00
William Zhang
e5703df262 arm: bcmbca: add bcm4908 SoC support
BCM4908 is a Broadcom B53 based WLAN AP router SoC. It is part of the
BCA (Broadband Carrier Access origin) chipset family so it's added
under ARCH_BCMBCA platform. This initial support includes a bare-bone
implementation and dts with CPU subsystem, memory and Broadcom uart.

This SoC is supported in the linux git repository so the dts and dtsi
files are stripped down version of linux copies with mininum blocks
needed by u-boot.

The u-boot image can be loaded from flash or network to the entry point
address in the memory and boot from there to the console.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
2022-10-31 08:54:44 -04:00
William Zhang
1b81843bac arm: bcmbca: add bcm6813 SoC support
BCM6813 is a Broadcom B53 based PON and WLAN AP router SoC. It is part
of the BCA (Broadband Carrier Access origin) chipset family so it's
added under ARCH_BCMBCA platform. This initial support includes a
bare-bone implementation and dts with CPU subsystem, memory and ARM
PL011 uart.

This SoC is supported in the linux-next git repository so the dts and
dtsi files are copied from linux.

The u-boot image can be loaded from flash or network to the entry point
address in the memory and boot from there to the console.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
2022-10-31 08:54:43 -04:00
William Zhang
dc6117dcb3 arm: bcmbca: add bcm4912 SoC support
BCM4912 is a Broadcom B53 based WLAN AP router SoC. It is part of the
BCA (Broadband Carrier Access origin) chipset family so it's added under
ARCH_BCMBCA platform. This initial support includes a bare-bone
implementation and dts with CPU subsystem, memory and ARM PL011 uart.

This SoC is supported in the linux-next git repository so the dts
and dtsi files are copied from linux.

The u-boot image can be loaded from flash or network to the entry
point address in the memory and boot from there to the console.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
2022-10-31 08:54:43 -04:00
William Zhang
c6e0073c05 arm: bcmbca: add bcm63146 SoC support
BCM63146 is a Broadcom B53 based DSL Broadband SoC. It is part of the
BCA (Broadband Carrier Access origin) chipset family so it's added under
ARCH_BCMBCA platform. This initial support includes a bare-bone
implementation and dts with CPU subsystem, memory and ARM PL011 uart.

This SoC is supported in the linux-next git repository so the dts and
dtsi files are copied from linux.

The u-boot image can be loaded from flash or network to the entry point
address in the memory and boot from there to the console.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
2022-10-31 08:54:43 -04:00
William Zhang
21385adf2c arm: bcmbca: add bcm63138 SoC support
BCM63138 is an ARM A9 based DSL Broadband SoC. It is part of the BCA
(Broadband Carrier Access origin) chipset family so it's added under
ARCH_BCMBCA platform. This initial support includes a bare-bone
implementation and dts with CPU subsystem, memory, ARM A9 global timer
and Broadcom uart.

This SoC is supported in the linux-next git repository so the dts and
dtsi files are stripped down version of linux copies with mininum blocks
needed by u-boot.

The u-boot image can be loaded from flash or network to the entry point
address in the memory and boot from there to the console.

This patch applies on top of the my previous patch [1].

[1] https://lists.denx.de/pipermail/u-boot/2022-August/490570.html

Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-10-31 08:54:43 -04:00
William Zhang
7e3d69592b arm: bcmbca: add bcm63148 SoC support
BCM63148 is an Broadcom B15 based DSL Broadband SoC. It is part of the
BCA (Broadband Carrier Access origin) chipset family so it's added under
ARCH_BCMBCA platform. This initial support includes a bare-bone
implementation and dts with CPU subsystem, memory and Broadcom uart.

This SoC is supported in the linux-next git repository so the dts and
dtsi files are copied from linux.

The u-boot image can be loaded from flash or network to the entry point
address in the memory and boot from there.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
2022-10-31 08:54:43 -04:00
William Zhang
4054fd7182 arm: bcmbca: add bcm6756 SoC support
BCM6756 is an ARM A7 based WLAN Gateway and Access Point Broadband SoC.
It is part of the BCA(Broadband Carrier Access origin) chipset family so
it's added under ARCH_BCMBCA platform. This initial support includes a
bare-bone implementation and dts with CPU subsystem, memory and ARM
PL011 uart.

This SoC is supported in the linux-next git repository so the dts and
dtsi files are copied from linux.

The u-boot image can be loaded from flash or network to the entry
point address in the memory and boot from there.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
2022-10-31 08:54:43 -04:00
William Zhang
4cab03842c arm: bcmbca: add bcm6878 SoC support
BCM6878 is an ARM A7 based PON Broadband SoC. It is part of the BCA
(Broadband Carrier Access origin) chipset family so it's added under
ARCH_BCMBCA platform. This initial support includes a bare-bone
implementation and dts with CPU subsystem, memory and ARM PL011
uart.

This SoC is supported in the linux-next git repository so the dts and
dtsi files are copied from linux with minor fix-up that needs to be
upstreamed to linux as well.

The u-boot image can be loaded from flash or network to the entry point
address in the memory and boot from there.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
2022-10-31 08:54:43 -04:00
William Zhang
adb34dd542 arm: bcmbca: add bcm6846 SoC support
BCM6846 is an ARM A7 based PON Broadband SoC. It is part of the BCA
(Broadband Carrier Access origin) chipset family so it's added under
ARCH_BCMBCA platform. This initial support includes a bare-bone
implementation and dts with CPU subsystem, memory and Broadcom uart.

This SoC is supported in the linux-next git repository so the dts and
dtsi files are copied from linux with minor fix-up that needs to be
upstreamed to linux as well.

The u-boot image can be loaded from flash or network to the entry point
address in the memory and boot from there.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
2022-10-31 08:54:43 -04:00
William Zhang
41c65ce44c arm: bcmbca: add bcm63178 SoC support
BCM63178 is an ARM A7 based DSL Broadband SoC. It is part of the BCA
(Broadband Carrier Access origin) chipset family so it's added under
ARCH_BCMBCA platform. This initial support includes a bare-bone
implementation and dts with CPU subsystem, memory and ARM PL011 uart.

This SoC is supported in the linux-next git repository so the dts and
dtsi files are copied from linux with minor fix-up that needs to be
upstreamed to linux as well.

The u-boot image can be loaded from flash or network to the entry
point address in the memory and boot from there.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
2022-10-31 08:54:42 -04:00
Tom Rini
218e2c45af - fix [hv]sync active vs back porch in dw_mipi_dsi
- simplefb rotation support
  - support splash as raw image from MMC
  - enhancements to Truetype console (multiple fonts and sizes)
  - drop old LCD support
 -----BEGIN PGP SIGNATURE-----
 
 iGwEABECACwWIQSC4hxrSoIUVfFO0kRM6ATMmsalXAUCY17nfA4cYWd1c3RAZGVu
 eC5kZQAKCRBM6ATMmsalXPPoAJ0UYyt3kwslUlAJhOC+KU9UlYnVuwCbBXIQyBua
 K5clq+GyxXfaDl2Hnvc=
 =XXVp
 -----END PGP SIGNATURE-----

Merge tag 'video-20221030' of https://source.denx.de/u-boot/custodians/u-boot-video

 - fix [hv]sync active vs back porch in dw_mipi_dsi
 - simplefb rotation support
 - support splash as raw image from MMC
 - enhancements to Truetype console (multiple fonts and sizes)
 - drop old LCD support
2022-10-30 17:16:35 -04:00
Simon Glass
b86986c7b3 video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO
Now that all the old code is gone, rename this option. Driver model
migration is now complete.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 20:07:17 +01:00
Simon Glass
eaf7075528 video: Drop SPLASHIMAGE_CALLBACK
This is not used anymore. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 20:07:17 +01:00
Simon Glass
b0c5353c7c video: Drop common LCD implementation
This code is no-longer used. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 20:07:17 +01:00
Simon Glass
9876b5e0ef video: Drop LCD_BPP
This is used by the old LCD implementation which is to be removed.
Drop it and LCD_OUTPUT_BPP also.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 20:07:17 +01:00
Simon Glass
0f9b86f811 video: Drop remaining references to CONFIG_LCD
These rely on the old LCD implementation which is to be removed. Drop it
all.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 20:07:17 +01:00
Simon Glass
c31e0c62b1 BuR: ronetix: siemens: Drop old LCD code
This relies on the old LCD implementation which is to be removed. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 20:07:17 +01:00
Simon Glass
baefc72192 tegra: Drop old LCD code
This relies on the old LCD implementation which is to be removed. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 20:07:17 +01:00
Simon Glass
365e52dd25 video: samsung: Drop old LCD code
This relies on the old LCD implementation which is to be removed. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 20:07:17 +01:00
Simon Glass
6b9a829d27 video: Drop atmel LCD code
This has not been migrated to DM_VIDEO since 2019. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 20:07:17 +01:00
Simon Glass
26cf75f92d video: Drop ld9040 driver
This is not used anymore. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 20:07:16 +01:00
Simon Glass
f24404d85f video: Move bmp_display() prototype to video.h
The lcd.h header is about to be deleted, so move this prototype.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 20:07:16 +01:00
Simon Glass
ba97899349 video: Drop CONFIG_LCD_INFO
This option is not used anymore since the LCD implementation is being
removed. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 20:07:16 +01:00
Simon Glass
816605652d video: Drop CONFIG_LCD_INFO_BELOW_LOGO
This option is not used anymore since the LCD implementation is being
removed. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 20:07:16 +01:00
Simon Glass
817f93422b video: Drop CONFIG_LCD_MENU
This relies on the old LCD implementation which is to be removed. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 20:07:16 +01:00
Simon Glass
832bcbb083 video: Drop CONFIG_LCD_ALIGNMENT
This option is not needed now that the LCD implementation is being
removed. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 20:07:16 +01:00
Simon Glass
2fd5a57af6 Convert CONFIG_VIDEO_LOGO_MAX_SIZE to Kconfig
This converts the following to Kconfig:
   CONFIG_VIDEO_LOGO_MAX_SIZE

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 20:07:16 +01:00
Simon Glass
e655003384 video: Rename CONFIG_SYS_VIDEO_LOGO_MAX_SIZE
This option should not have the SYS_ in it. Drop it so it fits in with the
other video options.

Also simplify the alignment code in gunzip_bmp(), since malloc() always
returns a 32-bit-aligned pointer.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 20:07:16 +01:00
Simon Glass
4adc28ebc6 Convert CONFIG_HIDE_LOGO_VERSION to Kconfig
This converts the following to Kconfig:
   CONFIG_HIDE_LOGO_VERSION

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 20:07:16 +01:00
Simon Glass
c830e285f4 video: Add a way to get the default font height
This is not as simple as it seems. Add a function to provide it so that
the upcoming menu feature can space lines out correctly.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 20:01:40 +01:00
Simon Glass
e90322f87c video: Add a function to get the dimensions of a BMP image
This is useful for some other users, so break this out into a function.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 20:01:40 +01:00
Simon Glass
430e1676a7 video: Add commands to list and change fonts
Add a new 'font' command which allows the fonts to be listed as well as
selecting a different font and size.

Allow the test to run on sandbox, where multiple font/size combinations
are supported, as well as sandbox_flattree, where they are not.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 20:01:40 +01:00
Simon Glass
57a847cd40 video: Add a way to change the font name and size
It is useful to be able to support multiple fonts. Add a function to
handle this as well as one to list the available fonts.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 20:01:40 +01:00
Simon Glass
0d3890188d video: Add function to obtain the U-Boot logo
It is useful to show the logo from other code, coming in a later feature.
Add a function to obtain it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 20:01:40 +01:00
Simon Glass
50d562c01f video: Allow filling the display with a colour
Generalise the video_clear() function to allow filling with a different
colour.

Tidy up the comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 20:01:40 +01:00
Simon Glass
6b6dc0d2fb video: Provide a function to set the cursor position
Add an exported function which allows the cursor position to be set to
pixel granularity. Make use of this in the existing code.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 09:53:47 +01:00
Simon Glass
a032e4b55e video: Move console colours to the video uclass
At present these are attached to vidconsole which means that the video
uclass requires that a console is enabled. This is not the intention.
The colours are a reasonable way of indexing common colours in any case,
so move them to the video uclass instead.

Rename vid_console_color() to video_index_to_colour() now that it is more
generic. Also fix the inconsistent spelling in these functions.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 08:43:24 +01:00
Michal Suchanek
f21954750a dm: core: Do not stop uclass iteration on error
When probing a device fails NULL pointer is returned, and following
devices in uclass list cannot be iterated. Skip to next device on error
instead.

With that the only condition under which these simple iteration
functions return error is when the dm is not initialized at uclass_get
time. This is not all that interesting, change return type to void.

Fixes: 6494d708bf ("dm: Add base driver model support")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-10-29 07:36:33 -06:00
Michal Suchanek
aa5511e77b dm: core: Add note about device_probe idempotence
device_probe returns early when the device is already activated.
Add a note to the documentation that it can be used on already activated
devices.

Signed-off-by: Michal Suchanek <msuchanek@suse.de>
2022-10-29 07:36:33 -06:00
Michal Suchanek
73f8fbc532 dm: core: Document return value of device bind functions
These functions use device_bind_with_driver_data internally, copy the
return value description.

Signed-off-by: Michal Suchanek <msuchanek@suse.de>
2022-10-29 07:36:33 -06:00
Michal Suchanek
58ddb937e1 dm: core: Switch uclass_*_device_err to use uclass_*_device_check
Clarify documentation, fix a few more cases that could be broken by the
change.

Signed-off-by: Michal Suchanek <msuchanek@suse.de>
2022-10-29 07:36:33 -06:00
Michal Suchanek
1fcfadcb82 dm: pci: Fix doc typo first -> next
pci_find_first_device description says it can be used for iteration with
itself but it should really be with pci_find_next_device

Signed-off-by: Michal Suchanek <msuchanek@suse.de>
2022-10-29 07:36:33 -06:00
Patrick Delaunay
d7e9de7ec1 fdt_support: cosmetic: remove fdt_fixup_nor_flash_size prototype
Remove prototype for the removed function fdt_fixup_nor_flash_size.
This patch has no impact as the function is never used.

Fixes: 98f705c9ce ("powerpc: remove 4xx support")
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-10-29 07:36:33 -06:00
Roger Quadros
9b0b5648d6 memory: Add TI GPMC driver
The GPMC is a unified memory controller dedicated for interfacing
with external memory devices like
 - Asynchronous SRAM-like memories and ASICs
 - Asynchronous, synchronous, and page mode burst NOR flash
 - NAND flash
 - Pseudo-SRAM devices

This driver will take care of setting up the GPMC based on
the settings specified in the Device tree and then
probe its children.

Signed-off-by: Roger Quadros <rogerq@kernel.org>
2022-10-26 15:21:12 -04:00