Convert CONFIG_HWCONFIG to Kconfig

This converts the following to Kconfig:
   CONFIG_HWCONFIG

Signed-off-by: Tom Rini <trini@konsulko.com>
This commit is contained in:
Tom Rini 2022-11-19 18:45:16 -05:00
parent d9feb83505
commit 19b4040df0
47 changed files with 22 additions and 40 deletions

View file

@ -676,6 +676,10 @@ config CLOCKS
bool "Call set_cpu_clk_info"
depends on ARM
config HWCONFIG
bool "hwconfig infrastructure"
default y if PPC || ARCH_LS1021A || FSL_LSCH2 || FSL_LSCH3
config SYS_FSL_CLK
bool
depends on ARCH_LS1021A || FSL_LSCH2 || FSL_LSCH3 || \

View file

@ -29,6 +29,7 @@ CONFIG_AUTOBOOT_DELAY_STR="root"
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="run flashboot"
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_HWCONFIG is not set
CONFIG_MISC_INIT_R=y
CONFIG_HUSH_PARSER=y
# CONFIG_AUTO_COMPLETE is not set

View file

@ -35,6 +35,7 @@ CONFIG_DEFAULT_FDT_FILE="da850-evm.dtb"
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_CLOCKS=y
CONFIG_HWCONFIG=y
CONFIG_MISC_INIT_R=y
CONFIG_SPL_PAD_TO=0x8000
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y

View file

@ -29,6 +29,7 @@ CONFIG_BOOTCOMMAND="run envboot; run mmcboot; "
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_CLOCKS=y
CONFIG_HWCONFIG=y
CONFIG_MISC_INIT_R=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PBSIZE=1050

View file

@ -33,6 +33,7 @@ CONFIG_DEFAULT_FDT_FILE="da850-evm.dtb"
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_CLOCKS=y
CONFIG_HWCONFIG=y
CONFIG_SPL_PAD_TO=0x8000
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
CONFIG_SPL_BSS_START_ADDR=0xc0000000

View file

@ -131,6 +131,7 @@ CONFIG_DISPLAY_CPUINFO=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_HWCONFIG is not set
CONFIG_LAST_STAGE_INIT=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_CBSIZE=1024

View file

@ -39,6 +39,7 @@ CONFIG_USE_PREBOOT=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_HWCONFIG=y
CONFIG_MISC_INIT_R=y
CONFIG_PCI_INIT_R=y
CONFIG_SPL_BOARD_INIT=y

View file

@ -39,6 +39,7 @@ CONFIG_USE_PREBOOT=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_HWCONFIG=y
CONFIG_MISC_INIT_R=y
CONFIG_PCI_INIT_R=y
CONFIG_SPL_BOARD_INIT=y

View file

@ -39,6 +39,7 @@ CONFIG_USE_PREBOOT=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_HWCONFIG=y
CONFIG_MISC_INIT_R=y
CONFIG_PCI_INIT_R=y
CONFIG_SPL_BOARD_INIT=y

View file

@ -167,6 +167,7 @@ CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n"
CONFIG_AUTOBOOT_STOP_STR=" "
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_HWCONFIG is not set
CONFIG_LAST_STAGE_INIT=y
CONFIG_MISC_INIT_R=y
CONFIG_HUSH_PARSER=y

View file

@ -137,6 +137,7 @@ CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n"
CONFIG_AUTOBOOT_STOP_STR=" "
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_HWCONFIG is not set
CONFIG_LAST_STAGE_INIT=y
CONFIG_MISC_INIT_R=y
CONFIG_HUSH_PARSER=y

View file

@ -150,6 +150,7 @@ CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n"
CONFIG_AUTOBOOT_STOP_STR=" "
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_HWCONFIG is not set
CONFIG_LAST_STAGE_INIT=y
CONFIG_MISC_INIT_R=y
CONFIG_HUSH_PARSER=y

View file

@ -130,6 +130,7 @@ CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n"
CONFIG_AUTOBOOT_STOP_STR=" "
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_HWCONFIG is not set
CONFIG_LAST_STAGE_INIT=y
CONFIG_MISC_INIT_R=y
CONFIG_HUSH_PARSER=y

View file

@ -150,6 +150,7 @@ CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n"
CONFIG_AUTOBOOT_STOP_STR=" "
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_HWCONFIG is not set
CONFIG_LAST_STAGE_INIT=y
CONFIG_MISC_INIT_R=y
CONFIG_HUSH_PARSER=y

View file

@ -39,6 +39,7 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTARGS=y
CONFIG_BOARD_LATE_INIT=y
# CONFIG_HWCONFIG is not set
CONFIG_PCI_INIT_R=y
CONFIG_SPL_MAX_SIZE=0x20000
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y

View file

@ -23,6 +23,7 @@ CONFIG_BOOTCOMMAND="if mmc rescan; then if run loadbootscr; then run bootscript;
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_LATE_INIT=y
CONFIG_CLOCKS=y
CONFIG_HWCONFIG=y
CONFIG_HUSH_PARSER=y
# CONFIG_BOOTM_NETBSD is not set
# CONFIG_BOOTM_PLAN9 is not set

View file

@ -23,6 +23,7 @@ CONFIG_USE_PREBOOT=y
CONFIG_PREBOOT="echo;echo Welcome on the ABB Socrates Board;echo"
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_HWCONFIG is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PBSIZE=276
CONFIG_CMD_REGINFO=y

View file

@ -130,6 +130,7 @@ CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n"
CONFIG_AUTOBOOT_STOP_STR=" "
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_HWCONFIG is not set
CONFIG_LAST_STAGE_INIT=y
CONFIG_MISC_INIT_R=y
CONFIG_HUSH_PARSER=y

View file

@ -152,6 +152,7 @@ CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n"
CONFIG_AUTOBOOT_STOP_STR=" "
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_HWCONFIG is not set
CONFIG_LAST_STAGE_INIT=y
CONFIG_MISC_INIT_R=y
CONFIG_HUSH_PARSER=y

View file

@ -1,6 +1,3 @@
To enable this feature just define CONFIG_HWCONFIG in your board
config file.
This implements a simple hwconfig infrastructure: an
interface for software knobs to control hardware.

View file

@ -14,8 +14,6 @@
* High Level Configuration Options
*/
#define CONFIG_HWCONFIG
/*
* On-board devices
*/

View file

@ -122,8 +122,6 @@
#define CFG_SYS_FLASH_BANKS_LIST \
{CFG_SYS_FLASH_BASE_PHYS + 0x800000, CFG_SYS_FLASH_BASE_PHYS}
#define CONFIG_HWCONFIG /* enable hwconfig */
/*
* SDRAM on the Local Bus
*/

View file

@ -96,7 +96,6 @@
#endif
#endif
#define CONFIG_HWCONFIG
/*
* These can be toggled for performance analysis, otherwise use default.
*/

View file

@ -132,8 +132,6 @@
#define CFG_SYS_FLASH_BANKS_LIST {CFG_SYS_FLASH_BASE_PHYS + 0x8000000}
#define CONFIG_HWCONFIG
/* define to use L1 as initial stack */
#define CONFIG_L1_INIT_RAM
#define CFG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */

View file

@ -270,8 +270,6 @@
#define CFG_SYS_CS1_FTIM3 CFG_SYS_NAND_FTIM3
#endif
#define CONFIG_HWCONFIG
/* define to use L1 as initial stack */
#define CONFIG_L1_INIT_RAM
#define CFG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */

View file

@ -248,8 +248,6 @@
#define CFG_SYS_CS1_FTIM3 CFG_SYS_NAND_FTIM3
#endif
#define CONFIG_HWCONFIG
/* define to use L1 as initial stack */
#define CONFIG_L1_INIT_RAM
#define CFG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */

View file

@ -246,8 +246,6 @@
#define CFG_SYS_CS2_FTIM3 CFG_SYS_NAND_FTIM3
#endif
#define CONFIG_HWCONFIG
/* define to use L1 as initial stack */
#define CONFIG_L1_INIT_RAM
#define CFG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */

View file

@ -211,8 +211,6 @@
#define CFG_SYS_CS1_FTIM3 CFG_SYS_NAND_FTIM3
#endif
#define CONFIG_HWCONFIG
/* define to use L1 as initial stack */
#define CONFIG_L1_INIT_RAM
#define CFG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */

View file

@ -70,8 +70,6 @@
#define CFG_SYS_FLASH_BASE 0xe0000000
#define CFG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CFG_SYS_FLASH_BASE)
#define CONFIG_HWCONFIG
/* define to use L1 as initial stack */
#define CONFIG_L1_INIT_RAM
#define CFG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */

View file

@ -137,7 +137,6 @@
* Linux Information
*/
#define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100)
#define CONFIG_HWCONFIG /* enable hwconfig */
#define DEFAULT_LINUX_BOOT_ENV \
"loadaddr=0xc0700000\0" \

View file

@ -45,7 +45,6 @@
#define CONFIG_IMX_VIDEO_SKIP
/* Miscellaneous configurable options */
#define CONFIG_HWCONFIG
/* Memory configuration */

View file

@ -166,7 +166,6 @@
#define CONFIG_SMP_PEN_ADDR 0x01ee0200
#define CONFIG_HWCONFIG
#define HWCONFIG_BUFFER_SIZE 256
/*

View file

@ -309,8 +309,6 @@
#define CFG_SYS_CS2_FTIM2 SYS_QRIO_FTIM2
#define CFG_SYS_CS2_FTIM3 SYS_QRIO_FTIM3
#define CONFIG_HWCONFIG
/* define to use L1 as initial stack */
#define CFG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */
#define CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf

View file

@ -48,7 +48,6 @@
* Linux Information
*/
#define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100)
#define CONFIG_HWCONFIG /* enable hwconfig */
#define CONFIG_SETUP_INITRD_TAG
#define CONFIG_EXTRA_ENV_SETTINGS \
"bootenvfile=uEnv.txt\0" \

View file

@ -24,7 +24,6 @@
#define CFG_SYS_NS16550_CLK (get_serial_clock())
#define CONFIG_HWCONFIG
#define HWCONFIG_BUFFER_SIZE 128
#define BOOT_TARGET_DEVICES(func) \

View file

@ -92,7 +92,6 @@
#define CONFIG_PEN_ADDR_BIG_ENDIAN
#define CONFIG_SMP_PEN_ADDR 0x01ee0200
#define CONFIG_HWCONFIG
#define HWCONFIG_BUFFER_SIZE 256
#define CONFIG_EXTRA_ENV_SETTINGS \

View file

@ -276,7 +276,6 @@
#define CONFIG_PEN_ADDR_BIG_ENDIAN
#define CONFIG_SMP_PEN_ADDR 0x01ee0200
#define CONFIG_HWCONFIG
#define HWCONFIG_BUFFER_SIZE 256
#ifdef CONFIG_LPUART

View file

@ -67,7 +67,6 @@
/* PCIe */
#define FSL_PCIE_COMPAT "fsl,ls1021a-pcie"
#define CONFIG_HWCONFIG
#define HWCONFIG_BUFFER_SIZE 256
#define BOOT_TARGET_DEVICES(func) \

View file

@ -157,7 +157,6 @@
#define CONFIG_PEN_ADDR_BIG_ENDIAN
#define CONFIG_SMP_PEN_ADDR 0x01ee0200
#define CONFIG_HWCONFIG
#define HWCONFIG_BUFFER_SIZE 256
#define BOOT_TARGET_DEVICES(func) \

View file

@ -34,7 +34,6 @@
/* Physical Memory Map */
#define CONFIG_HWCONFIG
#define HWCONFIG_BUFFER_SIZE 128
#define BOOT_TARGET_DEVICES(func) \

View file

@ -110,7 +110,6 @@
/* Miscellaneous configurable options */
#define CONFIG_HWCONFIG
#define HWCONFIG_BUFFER_SIZE 128
#ifndef SPL_NO_MISC

View file

@ -74,7 +74,6 @@
/* Miscellaneous configurable options */
#define CONFIG_HWCONFIG
#define HWCONFIG_BUFFER_SIZE 128
#define BOOT_TARGET_DEVICES(func) \

View file

@ -114,7 +114,6 @@ unsigned long long get_qixis_addr(void);
/* Physical Memory Map */
#define CONFIG_HWCONFIG
#define HWCONFIG_BUFFER_SIZE 128
#ifndef SPL_NO_ENV

View file

@ -107,7 +107,6 @@ unsigned long long get_qixis_addr(void);
/* Physical Memory Map */
/* fixme: these need to be checked against the board */
#define CONFIG_HWCONFIG
#define HWCONFIG_BUFFER_SIZE 128
/* Initial environment variables */

View file

@ -84,7 +84,6 @@
#define COUNTER_FREQUENCY_REAL (get_board_sys_clk() / 4)
#define CONFIG_HWCONFIG
#define HWCONFIG_BUFFER_SIZE 128
/* Initial environment variables */

View file

@ -112,7 +112,6 @@
#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc
#endif
#define CONFIG_HWCONFIG
/*
* These can be toggled for performance analysis, otherwise use default.
*/

View file

@ -33,8 +33,6 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void);
#define CFG_SYS_DDR_SDRAM_BASE 0x00000000
#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE
#define CONFIG_HWCONFIG
#define CFG_SYS_INIT_RAM_ADDR 0x00100000
#define CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0x0
#define CFG_SYS_INIT_RAM_ADDR_PHYS_LOW 0x00100000