Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-10 15:14:43 +00:00
Code Issues Projects Releases Packages Wiki Activity

global: Remove unused CONFIG symbols

Browse source 
This removes the following unreferenced CONFIG symbols:
   CONFIG_FDTADDR
   CONFIG_FDTFILE
   CONFIG_FLASH_SECTOR_SIZE
   CONFIG_FSL_CPLD
   CONFIG_HDMI_ENCODER_I2C_ADDR
   CONFIG_I2C_MVTWSI
   CONFIG_I2C_RTC_ADDR
   CONFIG_IRAM_END
   CONFIG_IRAM_SIZE
   CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE
   CONFIG_L1_INIT_RAM
   CONFIG_MACB_SEARCH_PHY
   CONFIG_MIU_2BIT_21_7_INTERLEAVED
   CONFIG_MTD_NAND_VERIFY_WRITE
   CONFIG_MVGBE_PORTS
   CONFIG_NETDEV
   CONFIG_NUM_DSP_CPUS
   CONFIG_PHY_BASE_ADR
   CONFIG_PHY_INTERFACE_MODE
   CONFIG_PSRAM_SCFG
   CONFIG_RAMBOOT_SPIFLASH
   CONFIG_RAMBOOT_TEXT_BASE
   CONFIG_RD_LVL
   CONFIG_ROCKCHIP_SDHCI_MAX_FREQ
   CONFIG_SETUP_INITRD_TAG
   CONFIG_SH_QSPI_BASE
   CONFIG_SMDK5420
   CONFIG_SOCRATES
   CONFIG_SPI_ADDR
   CONFIG_SPI_FLASH_QUAD
   CONFIG_SPI_FLASH_SIZE
   CONFIG_SPI_HALF_DUPLEX
   CONFIG_SPI_N25Q256A_RESET
   CONFIG_TEGRA_SLINK_CTRLS
   CONFIG_TPM_TIS_BASE_ADDRESS
   CONFIG_UBOOT_SECTOR_COUNT
   CONFIG_UBOOT_SECTOR_START
   CONFIG_VAR_SIZE_SPL
   CONFIG_VERY_BIG_RAM

And also:
   BL1_SIZE
   PHY_NO
   RESERVE_BLOCK_SIZE

Signed-off-by: Tom Rini <trini@konsulko.com>
This commit is contained in:
Tom Rini 2022-12-02 16:42:31 -05:00
parent 1353b25ec5
commit 308520b8f2
99 changed files with 14 additions and 391 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

11
README
View file

@ -373,12 +373,6 @@ The following options need to be configured:
such as ARM architectural timer initialization.
- Linux Kernel Interface:
CONFIG_MEMSIZE_IN_BYTES [relevant for MIPS only]
When transferring memsize parameter to Linux, some versions
expect it to be in bytes, others in MB.
Define CONFIG_MEMSIZE_IN_BYTES to make it in bytes.
CONFIG_OF_LIBFDT
New kernel versions are expecting firmware settings to be
@ -585,11 +579,6 @@ The following options need to be configured:
Support for generic parallel port TPM devices. Only one device
per system is supported at this time.
CONFIG_TPM_TIS_BASE_ADDRESS
Base address where the generic TPM device is mapped
to. Contemporary x86 systems usually map it at
0xfed40000.
CONFIG_TPM
Define this to enable the TPM support library which provides
functional interfaces to some TPM commands.

1
arch/arm/include/asm/arch-ls102xa/config.h
View file

@ -70,7 +70,6 @@
/* SATA */
#define AHCI_BASE_ADDR (CONFIG_SYS_IMMR + 0x02200000)
#ifdef CONFIG_DDR_SPD
#define CONFIG_VERY_BIG_RAM
#define CONFIG_MAX_MEM_MAPPED ((phys_size_t)2 << 30)
#endif

9
arch/arm/mach-mvebu/include/mach/config.h
View file

@ -30,13 +30,4 @@
/* Needed for SPI NOR booting in SPL */
#define CONFIG_DM_SEQ_ALIAS 1
/*
* I2C related stuff
*/
#ifdef CONFIG_CMD_I2C
#ifndef CONFIG_SYS_I2C_SOFT
#define CONFIG_I2C_MVTWSI
#endif
#endif
#endif /* __MVEBU_CONFIG_H */

1
arch/powerpc/include/asm/config_mpc85xx.h
View file

@ -133,7 +133,6 @@
#define CFG_SYS_FM_MURAM_SIZE 0x60000
#ifdef CONFIG_ARCH_B4860
#define CONFIG_NUM_DSP_CPUS 6
#define CFG_SYS_FSL_CLUSTER_CLOCKS { 1, 4, 4, 4 }
#define CFG_SYS_NUM_FM1_DTSEC 6
#define CFG_SYS_NUM_FM1_10GEC 2

1
arch/xtensa/include/asm/config.h
View file

@ -14,7 +14,6 @@
* restricting used physical memory to the first 128MB.
*/
#if XCHAL_HAVE_PTP_MMU
#define CONFIG_VERY_BIG_RAM
#define CONFIG_MAX_MEM_MAPPED (128 << 20)
#endif

2
board/Marvell/openrd/openrd.c
View file

@ -140,7 +140,7 @@ void mv_phy_init(char *name)
/* reset the phy */
miiphy_reset(name, devadr);
printf(PHY_NO" Initialized on %s\n", name);
printf("Initialized on %s\n", name);
}
void reset_phy(void)

4
drivers/net/mvgbe.c
View file

@ -37,10 +37,6 @@
DECLARE_GLOBAL_DATA_PTR;
#ifndef CONFIG_MVGBE_PORTS
# define CONFIG_MVGBE_PORTS {0, 0}
#endif
#define MV_PHY_ADR_REQUEST 0xee
#define MVGBE_SMI_REG (((struct mvgbe_registers *)MVGBE0_BASE)->smi)
#define MVGBE_PGADR_REG 22

7
drivers/net/mvgbe.h
View file

@ -11,13 +11,6 @@
#ifndef __MVGBE_H__
#define __MVGBE_H__
/* PHY_BASE_ADR is board specific and can be configured */
#if defined (CONFIG_PHY_BASE_ADR)
#define PHY_BASE_ADR CONFIG_PHY_BASE_ADR
#else
#define PHY_BASE_ADR 0x08 /* default phy base addr */
#endif
/* Constants */
#define INT_CAUSE_UNMASK_ALL 0x0007ffff
#define INT_CAUSE_UNMASK_ALL_EXT 0x0011ffff

7
drivers/ram/mpc83xx_sdram.c
View file

@ -118,12 +118,7 @@ int dram_init(void)
phys_size_t get_effective_memsize(void)
{
if (!IS_ENABLED(CONFIG_VERY_BIG_RAM))
return gd->ram_size;
/* Limit stack to what we can reasonable map */
return ((gd->ram_size > CONFIG_MAX_MEM_MAPPED) ?
CONFIG_MAX_MEM_MAPPED : gd->ram_size);
return gd->ram_size;
}
/**

8
include/configs/MPC837XERDB.h
View file

@ -195,12 +195,10 @@
* Environment Configuration
*/
#define CONFIG_NETDEV "eth1"
#define CONFIG_FDTFILE "mpc8379_rdb.dtb"
#define FDTFILE "mpc8379_rdb.dtb"
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=" CONFIG_NETDEV "\0" \
"netdev=eth1\0" \
"uboot=" CONFIG_UBOOTPATH "\0" \
"tftpflash=tftp $loadaddr $uboot;" \
"protect off " __stringify(CONFIG_TEXT_BASE) \
@ -214,7 +212,7 @@
"cmp.b $loadaddr " __stringify(CONFIG_TEXT_BASE) \
" $filesize\0" \
"fdtaddr=780000\0" \
"fdtfile=" CONFIG_FDTFILE "\0" \
"fdtfile=" FDTFILE "\0" \
"ramdiskaddr=1000000\0" \
"ramdiskfile=rootfs.ext2.gz.uboot\0" \
"console=ttyS0\0" \

1
include/configs/P1010RDB.h
View file

@ -24,7 +24,6 @@
#ifdef CONFIG_SPIFLASH
#ifdef CONFIG_NXP_ESBC
#define CONFIG_RAMBOOT_SPIFLASH
#define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc
#else
#define CFG_SYS_SPI_FLASH_U_BOOT_SIZE (512 << 10)

9
include/configs/P2041RDB.h
View file

@ -12,7 +12,6 @@
#define __CONFIG_H
#ifdef CONFIG_RAMBOOT_PBL
#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_TEXT_BASE
#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
#endif
@ -46,10 +45,9 @@
/*
* Config the L3 Cache as L3 SRAM
*/
#define CFG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE
#define CFG_SYS_INIT_L3_ADDR CONFIG_TEXT_BASE
#ifdef CONFIG_PHYS_64BIT
#define CFG_SYS_INIT_L3_ADDR_PHYS (0xf00000000ull | \
CONFIG_RAMBOOT_TEXT_BASE)
#define CFG_SYS_INIT_L3_ADDR_PHYS (0xf00000000ull | CONFIG_TEXT_BASE)
#else
#define CFG_SYS_INIT_L3_ADDR_PHYS CFG_SYS_INIT_L3_ADDR
#endif
@ -62,7 +60,6 @@
/*
* DDR Setup
*/
#define CONFIG_VERY_BIG_RAM
#define CFG_SYS_DDR_SDRAM_BASE 0x00000000
#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE
@ -88,7 +85,6 @@
#define CFG_SYS_FLASH_BASE_PHYS CFG_SYS_FLASH_BASE
#endif
#define CONFIG_FSL_CPLD
#define CPLD_BASE 0xffdf0000 /* CPLD registers */
#ifdef CONFIG_PHYS_64BIT
#define CPLD_BASE_PHYS 0xfffdf0000ull
@ -131,7 +127,6 @@
#define CFG_SYS_FLASH_BANKS_LIST {CFG_SYS_FLASH_BASE_PHYS + 0x8000000}
/* define to use L1 as initial stack */
#define CONFIG_L1_INIT_RAM
#define CFG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */
#ifdef CONFIG_PHYS_64BIT
#define CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf

9
include/configs/SBx81LIFKW.h
View file

@ -36,14 +36,5 @@
/* size in bytes reserved for initial data */
#include <asm/arch/config.h>
/* There is no PHY directly connected so don't ask it for link status */
/*
* Ethernet Driver configuration
*/
#ifdef CONFIG_CMD_NET
#define CONFIG_MVGBE_PORTS {1, 0} /* enable a single port */
#define CONFIG_PHY_BASE_ADR 0x01
#endif /* CONFIG_CMD_NET */
#endif /* _CONFIG_SBX81LIFKW_H */

9
include/configs/SBx81LIFXCAT.h
View file

@ -41,14 +41,5 @@
/* size in bytes reserved for initial data */
#include <asm/arch/config.h>
/* There is no PHY directly connected so don't ask it for link status */
/*
* Ethernet Driver configuration
*/
#ifdef CONFIG_CMD_NET
#define CONFIG_MVGBE_PORTS {1, 0} /* enable a single port */
#define CONFIG_PHY_BASE_ADR 0x01
#endif /* CONFIG_CMD_NET */
#endif /* _CONFIG_SBX81LIFXCAT_H */

2
include/configs/T102xRDB.h
View file

@ -112,7 +112,6 @@
/*
* DDR Setup
*/
#define CONFIG_VERY_BIG_RAM
#define CFG_SYS_DDR_SDRAM_BASE 0x00000000
#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE
#if defined(CONFIG_TARGET_T1024RDB)
@ -269,7 +268,6 @@
#endif
/* define to use L1 as initial stack */
#define CONFIG_L1_INIT_RAM
#define CFG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */
#ifdef CONFIG_PHYS_64BIT
#define CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf

4
include/configs/T104xRDB.h
View file

@ -86,7 +86,6 @@
/*
* DDR Setup
*/
#define CONFIG_VERY_BIG_RAM
#define CFG_SYS_DDR_SDRAM_BASE 0x00000000
#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE
@ -247,7 +246,6 @@
#endif
/* define to use L1 as initial stack */
#define CONFIG_L1_INIT_RAM
#define CFG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */
#define CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
#define CFG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000
@ -285,8 +283,6 @@
*/
#define CFG_SYS_I2C_RTC_ADDR 0x68
/*DVI encoder*/
#define CONFIG_HDMI_ENCODER_I2C_ADDR 0x75
#endif
/*

2
include/configs/T208xQDS.h
View file

@ -78,7 +78,6 @@
/*
* DDR Setup
*/
#define CONFIG_VERY_BIG_RAM
#define CFG_SYS_DDR_SDRAM_BASE 0x00000000
#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE
#define CFG_SYS_SDRAM_SIZE 2048 /* for fixed parameter use */
@ -245,7 +244,6 @@
#endif
/* define to use L1 as initial stack */
#define CONFIG_L1_INIT_RAM
#define CFG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */
#define CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
#define CFG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000

2
include/configs/T208xRDB.h
View file

@ -78,7 +78,6 @@
/*
* DDR Setup
*/
#define CONFIG_VERY_BIG_RAM
#define CFG_SYS_DDR_SDRAM_BASE 0x00000000
#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE
#define CFG_SYS_SDRAM_SIZE 2048 /* for fixed parameter use */
@ -210,7 +209,6 @@
#endif
/* define to use L1 as initial stack */
#define CONFIG_L1_INIT_RAM
#define CFG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */
#define CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
#define CFG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000

3
include/configs/T4240RDB.h
View file

@ -16,7 +16,6 @@
#ifdef CONFIG_RAMBOOT_PBL
#ifndef CONFIG_SDCARD
#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_TEXT_BASE
#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
#else
#define RESET_VECTOR_OFFSET 0x27FFC
@ -60,7 +59,6 @@
/*
* DDR Setup
*/
#define CONFIG_VERY_BIG_RAM
#define CFG_SYS_DDR_SDRAM_BASE 0x00000000
#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE
@ -71,7 +69,6 @@
#define CFG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CFG_SYS_FLASH_BASE)
/* define to use L1 as initial stack */
#define CONFIG_L1_INIT_RAM
#define CFG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */
#define CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
#define CFG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000

3
include/configs/alt.h
View file

@ -20,9 +20,6 @@
#define RCAR_GEN2_SDRAM_SIZE (1024u * 1024 * 1024)
#define RCAR_GEN2_UBOOT_SDRAM_SIZE (512 * 1024 * 1024)
/* FLASH */
#define CONFIG_SPI_FLASH_QUAD
/* SH Ether */
#define CONFIG_SH_ETHER_USE_PORT 0
#define CONFIG_SH_ETHER_PHY_ADDR 0x1

3
include/configs/ax25-ae350.h
View file

@ -49,9 +49,6 @@
*/
#define CFG_SYS_FLASH_BANKS_SIZES {0x4000000}
/* max number of sectors on one chip */
#define CONFIG_FLASH_SECTOR_SIZE (0x10000*2)
/* environments */
/* SPI FLASH */

4
include/configs/beaver.h
View file

@ -20,10 +20,6 @@
#define CONFIG_TEGRA_ENABLE_UARTA
#define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
/* SPI */
#define CONFIG_TEGRA_SLINK_CTRLS 6
#define CONFIG_SPI_FLASH_SIZE (4 << 20)
#include "tegra-common-post.h"
#endif /* __CONFIG_H */

4
include/configs/blanche.h
View file

@ -22,9 +22,7 @@
#define RCAR_GEN2_UBOOT_SDRAM_SIZE (512 * 1024 * 1024)
/* FLASH */
#if !defined(CONFIG_MTD_NOR_FLASH)
#define CONFIG_SH_QSPI_BASE 0xE6B10000
#else
#if defined(CONFIG_MTD_NOR_FLASH)
#define CFG_SYS_FLASH_BASE 0x00000000
#define CFG_SYS_FLASH_SIZE 0x04000000 /* 64 MB */
#define CFG_SYS_FLASH_BANKS_LIST { (CFG_SYS_FLASH_BASE) }

4
include/configs/cardhu.h
View file

@ -24,10 +24,6 @@
#define CONFIG_TEGRA_ENABLE_UARTA
#define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
/* SPI */
#define CONFIG_TEGRA_SLINK_CTRLS 6
#define CONFIG_SPI_FLASH_SIZE (4 << 20)
#include "tegra-common-post.h"
#endif /* __CONFIG_H */

3
include/configs/cei-tk1-som.h
View file

@ -22,9 +22,6 @@
#define CONFIG_TEGRA_ENABLE_UARTD
#define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE
/* SPI */
#define CONFIG_SPI_FLASH_SIZE (4 << 20)
#include "tegra-common-post.h"
#endif /* __CONFIG_H */

4
include/configs/colibri_vf.h
View file

@ -14,10 +14,6 @@
#include <asm/arch/imx-regs.h>
#include <linux/sizes.h>
/* NAND support */
#define CONFIG_FDTADDR 0x84000000
#define MEM_LAYOUT_ENV_SETTINGS \
"bootm_size=0x10000000\0" \
"fdt_addr_r=0x82000000\0" \

3
include/configs/dalmore.h
View file

@ -19,9 +19,6 @@
/* Environment in eMMC, at the end of 2nd "boot sector" */
/* SPI */
#define CONFIG_SPI_FLASH_SIZE (4 << 20)
#include "tegra-common-post.h"
#endif /* __CONFIG_H */

7
include/configs/dns325.h
View file

@ -16,13 +16,6 @@
/* Remove or override few declarations from mv-common.h */
/*
* Ethernet Driver configuration
*/
#ifdef CONFIG_CMD_NET
#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
#endif
/*
* Enable GPI0 support
*/

6
include/configs/dockstar.h
View file

@ -28,10 +28,4 @@
"initrd=/boot/uInitrd\0" \
"bootargs_root=ubi.mtd=1 root=ubi0:root rootfstype=ubifs ro\0"
/*
* Ethernet Driver configuration
*/
#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
#define CONFIG_PHY_BASE_ADR 0
#endif /* _CONFIG_DOCKSTAR_H */

1
include/configs/dra7xx_evm.h
View file

@ -13,7 +13,6 @@
#include <environment/ti/dfu.h>
#define CONFIG_VERY_BIG_RAM
#define CONFIG_MAX_MEM_MAPPED 0x80000000
#ifndef CONFIG_QSPI_BOOT

6
include/configs/dreamplug.h
View file

@ -24,10 +24,4 @@
"x_bootargs=console=ttyS0,115200\0" \
"x_bootargs_root=root=/dev/sda2 rootdelay=10\0"
/*
* Ethernet Driver configuration
*/
#define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */
#define CONFIG_PHY_BASE_ADR 0
#endif /* _CONFIG_DREAMPLUG_H */

8
include/configs/ds109.h
View file

@ -35,12 +35,4 @@
"ipaddr=192.168.1.5\0" \
"usb0Mode=host\0"
/*
* Ethernet Driver configuration
*/
#ifdef CONFIG_CMD_NET
#define CONFIG_MVGBE_PORTS {1, 0} /* enable one port */
#define CONFIG_PHY_BASE_ADR 8
#endif /* CONFIG_CMD_NET */
#endif /* _CONFIG_DS109_H */

8
include/configs/eb_cpu5282.h
View file

@ -144,13 +144,5 @@
#define CFG_SYS_DDRUA 0x05
#define CFG_SYS_PJPAR 0xFF
/*-----------------------------------------------------------------------
* I2C
*/
#ifdef CONFIG_CMD_DATE
#define CONFIG_I2C_RTC_ADDR 0x68
#endif
#endif /* _CONFIG_M5282EVB_H */
/*---------------------------------------------------------------------*/

2
include/configs/efi-x86_app.h
View file

@ -8,8 +8,6 @@
#include <configs/x86-common.h>
#undef CONFIG_TPM_TIS_BASE_ADDRESS
#define CONFIG_STD_DEVICES_SETTINGS "stdin=serial\0" \
"stdout=vidconsole\0" \
"stderr=vidconsole\0"

6
include/configs/embestmx6boards.h
View file

@ -35,11 +35,11 @@
#if defined(CONFIG_ENV_IS_IN_MMC)
/* RiOTboard */
#define CONFIG_FDTFILE "imx6dl-riotboard.dtb"
#define FDTFILE "imx6dl-riotboard.dtb"
#define CFG_SYS_FSL_USDHC_NUM 3
#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
/* MarSBoard */
#define CONFIG_FDTFILE "imx6q-marsboard.dtb"
#define FDTFILE "imx6q-marsboard.dtb"
#define CFG_SYS_FSL_USDHC_NUM 2
#endif
@ -79,7 +79,7 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
CONSOLE_ENV_SETTINGS \
MEM_LAYOUT_ENV_SETTINGS \
"fdtfile=" CONFIG_FDTFILE "\0" \
"fdtfile=" FDTFILE "\0" \
"finduuid=part uuid mmc 0:1 uuid\0" \
BOOTENV

1
include/configs/ethernut5.h
View file

@ -49,7 +49,6 @@
/* Ethernet */
#define CONFIG_PHY_ID 0
#define CONFIG_MACB_SEARCH_PHY
/* MMC */
#ifdef CONFIG_CMD_MMC

2
include/configs/exynos5-common.h
View file

@ -27,8 +27,6 @@
/* MMC SPL */
#define COPY_BL2_FNPTR_ADDR 0x02020030
#define CONFIG_RD_LVL
#define PHYS_SDRAM_1 CFG_SYS_SDRAM_BASE
#define PHYS_SDRAM_1_SIZE SDRAM_BANK_SIZE
#define PHYS_SDRAM_2 (CFG_SYS_SDRAM_BASE + SDRAM_BANK_SIZE)

2
include/configs/exynos5420-common.h
View file

@ -8,8 +8,6 @@
#ifndef __CONFIG_EXYNOS5420_H
#define __CONFIG_EXYNOS5420_H
#define CONFIG_VAR_SIZE_SPL
#define CONFIG_IRAM_TOP 0x02074000
#define CONFIG_PHY_IRAM_BASE 0x02020000

4
include/configs/exynos7420-common.h
View file

@ -15,10 +15,6 @@
/* select serial console configuration */
/* IRAM Layout */
#define CONFIG_IRAM_BASE 0x02100000
#define CONFIG_IRAM_SIZE 0x58000
#define CONFIG_IRAM_END (CONFIG_IRAM_BASE + CONFIG_IRAM_SIZE)
#define CPU_RELEASE_ADDR secondary_boot_addr
/* select serial console configuration */

6
include/configs/goflexhome.h
View file

@ -36,10 +36,4 @@
"kernel=/boot/uImage\0" \
"bootargs_root=ubi.mtd=root root=ubi0:root rootfstype=ubifs ro\0"
/*
* Ethernet Driver configuration
*/
#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
#define CONFIG_PHY_BASE_ADR 0
#endif /* _CONFIG_GOFLEXHOME_H */

8
include/configs/guruplug.h
View file

@ -30,12 +30,4 @@
"fdt=/boot/guruplug-server-plus.dtb\0" \
"bootargs_root=ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs rw\0"
/*
* Ethernet Driver configuration
*/
#ifdef CONFIG_CMD_NET
#define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */
#define CONFIG_PHY_BASE_ADR 0
#endif /* CONFIG_CMD_NET */
#endif /* _CONFIG_GURUPLUG_H */

8
include/configs/ib62x0.h
View file

@ -24,14 +24,6 @@
"fdt=/boot/ib62x0.dtb\0" \
"bootargs_root=ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs rw\0"
/*
* Ethernet driver configuration
*/
#ifdef CONFIG_CMD_NET
#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
#define CONFIG_PHY_BASE_ADR 0
#endif /* CONFIG_CMD_NET */
/*
* SATA driver configuration
*/

10
include/configs/iconnect.h
View file

@ -16,14 +16,4 @@
"kernel=/boot/uImage\0" \
"bootargs_root=noinitrd ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs\0"
/*
* Ethernet driver configuration
*
* This board has PCIe Wifi card, so allow Ethernet to be disabled
*/
#ifdef CONFIG_CMD_NET
#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
#define CONFIG_PHY_BASE_ADR 11
#endif /* CONFIG_CMD_NET */
#endif /* _CONFIG_ICONNECT_H */

5
include/configs/jetson-tk1.h
View file

@ -18,11 +18,6 @@
#define CONFIG_TEGRA_ENABLE_UARTD
#define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE
/* Environment in eMMC, at the end of 2nd "boot sector" */
/* SPI */
#define CONFIG_SPI_FLASH_SIZE (4 << 20)
#include "tegra-common-post.h"
#endif /* __CONFIG_H */

1
include/configs/k2e_evm.h
View file

@ -39,6 +39,5 @@
/* Network */
#define CONFIG_KSNET_NETCP_V1_5
#define CONFIG_KSNET_CPSW_NUM_PORTS 9
#define CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE
#endif /* __CONFIG_K2E_EVM_H */

1
include/configs/k2g_evm.h
View file

@ -53,7 +53,6 @@
/* Network */
#define CONFIG_KSNET_NETCP_V1_5
#define CONFIG_KSNET_CPSW_NUM_PORTS 2
#define CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE
#define PHY_ANEG_TIMEOUT 10000 /* PHY needs longer aneg time */
#define SPI_MTD_PARTS KEYSTONE_SPI1_MTD_PARTS

1
include/configs/k2l_evm.h
View file

@ -39,6 +39,5 @@
/* Network */
#define CONFIG_KSNET_NETCP_V1_5
#define CONFIG_KSNET_CPSW_NUM_PORTS 5
#define CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE
#endif /* __CONFIG_K2L_EVM_H */

1
include/configs/kmcent2.h
View file

@ -149,7 +149,6 @@
/*
* DDR Setup
*/
#define CONFIG_VERY_BIG_RAM
#define CFG_SYS_DDR_SDRAM_BASE 0x00000000
#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE

1
include/configs/kontron_sl28.h
View file

@ -18,7 +18,6 @@
/* DDR */
#define CONFIG_MEM_INIT_VALUE 0xdeadbeef
#define CONFIG_VERY_BIG_RAM
#define CFG_SYS_DDR_SDRAM_BASE 0x80000000
#define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY 0
#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE

7
include/configs/lacie_kw.h
View file

@ -14,13 +14,6 @@
* Enable platform initialisation via misc_init_r() function
*/
/*
* Ethernet Driver configuration
*/
#ifdef CONFIG_CMD_NET
#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
#endif
/*
* Enable GPI0 support
*/

1
include/configs/legoev3.h
View file

@ -48,7 +48,6 @@
* Linux Information
*/
#define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100)
#define CONFIG_SETUP_INITRD_TAG
#define CONFIG_EXTRA_ENV_SETTINGS \
"bootenvfile=uEnv.txt\0" \
"fdtfile=da850-lego-ev3.dtb\0" \

1
include/configs/ls1028a_common.h
View file

@ -12,7 +12,6 @@
/* Link Definitions */
#define CONFIG_VERY_BIG_RAM
#define CFG_SYS_DDR_SDRAM_BASE 0x80000000UL
#define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY 0
#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE

1
include/configs/ls1043a_common.h
View file

@ -31,7 +31,6 @@
/* Link Definitions */
#define CONFIG_VERY_BIG_RAM
#define CFG_SYS_DDR_SDRAM_BASE 0x80000000
#define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY 0
#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE

1
include/configs/ls1043aqds.h
View file

@ -107,7 +107,6 @@
#define CFG_SYS_NAND_FTIM3 0x0
#define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE }
#define CONFIG_MTD_NAND_VERIFY_WRITE
#endif
#ifdef CONFIG_NAND_BOOT

1
include/configs/ls1043ardb.h
View file

@ -82,7 +82,6 @@
#define CFG_SYS_NAND_FTIM3 0x0
#define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE }
#define CONFIG_MTD_NAND_VERIFY_WRITE
#ifdef CONFIG_NAND_BOOT
#define CFG_SYS_NAND_U_BOOT_SIZE (1024 << 10)

1
include/configs/ls1046a_common.h
View file

@ -31,7 +31,6 @@
/* Link Definitions */
#define CONFIG_VERY_BIG_RAM
#define CFG_SYS_DDR_SDRAM_BASE 0x80000000
#define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY 0
#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE

1
include/configs/ls1046afrwy.h
View file

@ -45,7 +45,6 @@
#define CFG_SYS_NAND_FTIM3 0x0
#define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE }
#define CONFIG_MTD_NAND_VERIFY_WRITE
/* IFC Timing Params */
#define CFG_SYS_CSPR0_EXT CFG_SYS_NAND_CSPR_EXT

1
include/configs/ls1046aqds.h
View file

@ -123,7 +123,6 @@
#define CFG_SYS_NAND_FTIM3 0x0
#define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE }
#define CONFIG_MTD_NAND_VERIFY_WRITE
#endif
#ifdef CONFIG_NAND_BOOT

1
include/configs/ls1046ardb.h
View file

@ -50,7 +50,6 @@
#define CFG_SYS_NAND_FTIM3 0x0
#define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE }
#define CONFIG_MTD_NAND_VERIFY_WRITE
/*
* CPLD

1
include/configs/ls1088a_common.h
View file

@ -29,7 +29,6 @@
/* Link Definitions */
#define CFG_SYS_FSL_QSPI_BASE 0x20000000
#define CONFIG_VERY_BIG_RAM
#define CFG_SYS_DDR_SDRAM_BASE 0x80000000UL
#define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY 0
#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE

1
include/configs/ls1088aqds.h
View file

@ -97,7 +97,6 @@
#define CFG_SYS_NAND_FTIM3 0x0
#define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE }
#define CONFIG_MTD_NAND_VERIFY_WRITE
#define CFG_SYS_I2C_FPGA_ADDR 0x66
#define QIXIS_LBMAP_SWITCH 6

1
include/configs/ls1088ardb.h
View file

@ -81,7 +81,6 @@
#define CFG_SYS_NAND_FTIM3 0x0
#define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE }
#define CONFIG_MTD_NAND_VERIFY_WRITE
#define CFG_SYS_I2C_FPGA_ADDR 0x66
#define QIXIS_BRDCFG4_OFFSET 0x54

1
include/configs/ls2080a_common.h
View file

@ -16,7 +16,6 @@
/* Link Definitions */
#define CONFIG_VERY_BIG_RAM
#define CFG_SYS_DDR_SDRAM_BASE 0x80000000UL
#define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY 0
#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE

1
include/configs/ls2080aqds.h
View file

@ -98,7 +98,6 @@
#define CFG_SYS_NAND_FTIM3 0x0
#define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE }
#define CONFIG_MTD_NAND_VERIFY_WRITE
#define QIXIS_LBMAP_SWITCH 0x06
#define QIXIS_LBMAP_MASK 0x0f

1
include/configs/ls2080ardb.h
View file

@ -95,7 +95,6 @@
#define CFG_SYS_NAND_FTIM3 0x0
#define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE }
#define CONFIG_MTD_NAND_VERIFY_WRITE
#define QIXIS_LBMAP_SWITCH 0x06
#define QIXIS_LBMAP_MASK 0x0f

1
include/configs/lx2160a_common.h
View file

@ -13,7 +13,6 @@
#define CFG_SYS_FLASH_BASE 0x20000000
/* DDR */
#define CONFIG_VERY_BIG_RAM
#define CFG_SYS_DDR_SDRAM_BASE 0x80000000UL
#define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY 0
#define CFG_SYS_DDR_BLOCK2_BASE 0x2080000000ULL

2
include/configs/malta.h
View file

@ -11,8 +11,6 @@
*/
#define CONFIG_MALTA
#define CONFIG_MEMSIZE_IN_BYTES
/*
* CPU Configuration
*/

1
include/configs/mt7621.h
View file

@ -10,7 +10,6 @@
#define CFG_SYS_SDRAM_BASE 0x80000000
#define CONFIG_VERY_BIG_RAM
#define CONFIG_MAX_MEM_MAPPED 0x1c000000
#define CFG_SYS_INIT_SP_OFFSET 0x800000

5
include/configs/mt7629.h
View file

@ -15,10 +15,7 @@
/* Environment */
/* Defines for SPL */
#define CONFIG_SPI_ADDR 0x30000000
#define CFG_SYS_UBOOT_BASE (CONFIG_SPI_ADDR + CONFIG_SPL_PAD_TO)
#define CFG_SYS_UBOOT_BASE (0x30000000 + CONFIG_SPL_PAD_TO)
/* SPL -> Uboot */

5
include/configs/mxs.h
View file

@ -86,9 +86,4 @@
#define CFG_SYS_NAND_BASE 0x60000000
#endif
/* SPI */
#ifdef CONFIG_CMD_SPI
#define CONFIG_SPI_HALF_DUPLEX
#endif
#endif /* __CONFIGS_MXS_H__ */

12
include/configs/nas220.h
View file

@ -39,16 +39,4 @@
"bootargs=console=ttyS0,115200\0" \
"autostart=no\0"
/*
* Ethernet Driver configuration
*/
#ifdef CONFIG_CMD_NET
#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
#define CONFIG_PHY_BASE_ADR 8
#endif /* CONFIG_CMD_NET */
/*
* EFI partition
*/
#endif /* _CONFIG_NAS220_H */

4
include/configs/nsa310s.h
View file

@ -46,8 +46,4 @@
#endif /* CONFIG_SPL_BUILD */
/* Ethernet driver configuration */
#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
#define CONFIG_PHY_BASE_ADR 1
#endif /* _CONFIG_NSA310S_H */

3
include/configs/nyan-big.h
View file

@ -18,9 +18,6 @@
#define CONFIG_TEGRA_ENABLE_UARTA
#define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
/* SPI */
#define CONFIG_SPI_FLASH_SIZE (4 << 20)
#include "tegra-common-post.h"
#endif /* __CONFIG_H */

22
include/configs/openrd.h
View file

@ -33,26 +33,4 @@
"x_bootcmd_usb=usb start\0" \
"x_bootargs_root=root=ubi0:rootfs rootfstype=ubifs\0"
/*
* Ethernet Driver configuration
*/
#ifdef CONFIG_CMD_NET
# ifdef CONFIG_BOARD_IS_OPENRD_BASE
# define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
# else
# define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */
# endif
# ifdef CONFIG_BOARD_IS_OPENRD_ULTIMATE
# define CONFIG_PHY_BASE_ADR 0x0
# define PHY_NO "88E1121"
# else
# define CONFIG_PHY_BASE_ADR 0x8
# define PHY_NO "88E1116"
# endif
#endif /* CONFIG_CMD_NET */
/*
* SATA Driver configuration
*/
#endif /* _CONFIG_OPENRD_BASE_H */

6
include/configs/origen.h
View file

@ -38,10 +38,4 @@
"bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
"source ${loadaddr}\0"
/* MIU (Memory Interleaving Unit) */
#define CONFIG_MIU_2BIT_21_7_INTERLEAVED
#define RESERVE_BLOCK_SIZE (512)
#define BL1_SIZE (16 << 10) /*16 K reserved for BL1*/
#endif /* __CONFIG_H */

3
include/configs/p2371-0000.h
View file

@ -19,9 +19,6 @@
/* Environment in eMMC, at the end of 2nd "boot sector" */
/* SPI */
#define CONFIG_SPI_FLASH_SIZE (4 << 20)
#include "tegra-common-post.h"
#endif /* _P2371_0000_H */

3
include/configs/p2371-2180.h
View file

@ -19,9 +19,6 @@
/* Environment in eMMC, at the end of 2nd "boot sector" */
/* SPI */
#define CONFIG_SPI_FLASH_SIZE (4 << 20)
#include "tegra-common-post.h"
#endif /* _P2371_2180_H */

3
include/configs/p2571.h
View file

@ -19,9 +19,6 @@
/* Environment in eMMC, at the end of 2nd "boot sector" */
/* SPI */
#define CONFIG_SPI_FLASH_SIZE (4 << 20)
#include "tegra-common-post.h"
#endif /* _P2571_H */

3
include/configs/p3450-0000.h
View file

@ -23,9 +23,6 @@
func(PXE, pxe, na) \
func(DHCP, dhcp, na)
/* Environment at end of QSPI, in the VER partition */
#define CONFIG_SPI_FLASH_SIZE (4 << 20)
#define BOARD_EXTRA_ENV_SETTINGS \
"preboot=if test -e mmc 1:1 /u-boot-preboot.scr; then " \
"load mmc 1:1 ${scriptaddr} /u-boot-preboot.scr; " \

5
include/configs/pm9263.h
View file

@ -159,11 +159,6 @@
/* PSRAM */
#define PHYS_PSRAM 0x70000000
#define PHYS_PSRAM_SIZE 0x00400000 /* 4MB */
/* Slave EBI1, PSRAM connected */
#define CONFIG_PSRAM_SCFG (AT91_MATRIX_SCFG_ARBT_FIXED_PRIORITY | \
AT91_MATRIX_SCFG_FIXED_DEFMSTR(5) | \
AT91_MATRIX_SCFG_DEFMSTR_TYPE_FIXED | \
AT91_MATRIX_SCFG_SLOT_CYCLE(255))
/* USB */
#define CFG_SYS_USB_OHCI_REGS_BASE 0x00a00000 /* AT91SAM9263_UHP_BASE */

6
include/configs/pogo_e02.h
View file

@ -23,10 +23,4 @@
"bootcmd_usb=usb start; ext2load usb 0:1 0x00800000 /uImage; " \
"ext2load usb 0:1 0x01100000 /uInitrd\0"
/*
* Ethernet Driver configuration
*/
#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
#define CONFIG_PHY_BASE_ADR 0
#endif /* _CONFIG_POGO_E02_H */

6
include/configs/pogo_v4.h
View file

@ -69,10 +69,4 @@
BOOTENV
#endif /* CONFIG_SPL_BUILD */
/*
* Ethernet Driver configuration
*/
#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
#define CONFIG_PHY_BASE_ADR 0
#endif /* _CONFIG_POGO_V4_H */

3
include/configs/porter.h
View file

@ -21,9 +21,6 @@
#define RCAR_GEN2_SDRAM_SIZE (2048u * 1024 * 1024)
#define RCAR_GEN2_UBOOT_SDRAM_SIZE (1024u * 1024 * 1024)
/* FLASH */
#define CONFIG_SPI_FLASH_QUAD
/* SH Ether */
#define CONFIG_SH_ETHER_USE_PORT 0
#define CONFIG_SH_ETHER_PHY_ADDR 0x1

1
include/configs/qemu-ppce500.h
View file

@ -29,7 +29,6 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void);
/*
* DDR Setup
*/
#define CONFIG_VERY_BIG_RAM
#define CFG_SYS_DDR_SDRAM_BASE 0x00000000
#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE

1
include/configs/rcar-gen3-common.h
View file

@ -28,7 +28,6 @@
#define DRAM_RSV_SIZE 0x08000000
#define CFG_SYS_SDRAM_BASE (0x40000000 + DRAM_RSV_SIZE)
#define CFG_SYS_SDRAM_SIZE (0x80000000u - DRAM_RSV_SIZE)
#define CONFIG_VERY_BIG_RAM
#define CONFIG_MAX_MEM_MAPPED (0x80000000u - DRAM_RSV_SIZE)
/* ENV setting */

10
include/configs/rk3399_common.h
View file

@ -10,16 +10,6 @@
#define CONFIG_IRAM_BASE 0xff8c0000
#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_TPL_BOOTROM_SUPPORT)
#else
/* BSS setup */
#endif
/* MMC/SD IP block */
#define CONFIG_ROCKCHIP_SDHCI_MAX_FREQ 200000000
/* RAW SD card / eMMC locations. */
/* FAT sd card locations. */
#define CFG_SYS_SDRAM_BASE 0
#define SDRAM_MAX_SIZE 0xf8000000

6
include/configs/sheevaplug.h
View file

@ -21,10 +21,4 @@
"x_bootcmd_usb=usb start\0" \
"x_bootargs_root=root=/dev/mtdblock3 rw rootfstype=jffs2\0"
/*
* Ethernet Driver configuration
*/
#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
#define CONFIG_PHY_BASE_ADR 0
#endif /* _CONFIG_SHEEVAPLUG_H */

3
include/configs/silk.h
View file

@ -21,9 +21,6 @@
#define RCAR_GEN2_SDRAM_SIZE (1024u * 1024 * 1024)
#define RCAR_GEN2_UBOOT_SDRAM_SIZE (512 * 1024 * 1024)
/* FLASH */
#define CONFIG_SPI_FLASH_QUAD
/* SH Ether */
#define CONFIG_SH_ETHER_USE_PORT 0
#define CONFIG_SH_ETHER_PHY_ADDR 0x1

2
include/configs/smdk5420.h
View file

@ -12,8 +12,6 @@
#include <configs/exynos5-dt-common.h>
#include <configs/exynos5-common.h>
#define CONFIG_SMDK5420 /* which is in a SMDK5420 */
#define CFG_SYS_SDRAM_BASE 0x20000000
/* DRAM Memory Banks */

3
include/configs/smdkv310.h
View file

@ -34,9 +34,6 @@
/* FLASH and environment organization */
#define RESERVE_BLOCK_SIZE (512)
#define BL1_SIZE (16 << 10) /*16 K reserved for BL1*/
/* Ethernet Controllor Driver */
#ifdef CONFIG_CMD_NET
#define CONFIG_ENV_SROM_BANK 1

6
include/configs/socfpga_sr1500.h
View file

@ -11,15 +11,9 @@
#define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on SR1500 */
/* Ethernet on SoC (EMAC) */
#define CONFIG_PHY_INTERFACE_MODE PHY_INTERFACE_MODE_RGMII
/* The PHY is autodetected, so no MII PHY address is needed here */
#define PHY_ANEG_TIMEOUT 8000
/* Enable SPI NOR flash reset, needed for SPI booting */
#define CONFIG_SPI_N25Q256A_RESET
/* Environment setting for SPI flash */
/* The rest of the configuration is shared */
#include <configs/socfpga_common.h>

4
include/configs/socrates.h
View file

@ -16,9 +16,6 @@
#ifndef __CONFIG_H
#define __CONFIG_H
/* High Level Configuration Options */
#define CONFIG_SOCRATES 1
/*
* Only possible on E500 Version 2 or newer cores.
*/
@ -55,7 +52,6 @@
#define CFG_SYS_DDR_SDRAM_BASE 0x00000000
#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE
#define CONFIG_VERY_BIG_RAM
/* I2C addresses of SPD EEPROMs */
#define SPD_EEPROM_ADDRESS 0x50 /* CTLR 0 DIMM 0 */

3
include/configs/stout.h
View file

@ -25,9 +25,6 @@
/* SCIF */
#define CONFIG_SCIF_A
/* SPI */
#define CONFIG_SPI_FLASH_QUAD
/* SH Ether */
#define CONFIG_SH_ETHER_USE_PORT 0
#define CONFIG_SH_ETHER_PHY_ADDR 0x1

1
include/configs/synquacer.h
View file

@ -14,7 +14,6 @@
#define CFG_SYS_SDRAM_BASE (0x80000000) /* Start address of DDR3 */
#define PHYS_SDRAM_SIZE (0x7c000000) /* Default size (2GB - Secure memory) */
#define CONFIG_VERY_BIG_RAM /* SynQuacer supports up to 64GB */
#define CONFIG_MAX_MEM_MAPPED PHYS_SDRAM_SIZE
#define SQ_DRAMINFO_BASE (0x2e00ffc0) /* DRAM info from TF-A */

6
include/configs/tec-ng.h
View file

@ -16,12 +16,6 @@
#define CONFIG_TEGRA_ENABLE_UARTD
#define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE
/* Environment in eMMC, at the end of 2nd "boot sector" */
/* SPI */
#define CONFIG_TEGRA_SLINK_CTRLS 6
#define CONFIG_SPI_FLASH_SIZE (4 << 20)
#include "tegra-common-post.h"
#endif /* __CONFIG_H */

3
include/configs/venice2.h
View file

@ -20,9 +20,6 @@
/* Environment in eMMC, at the end of 2nd "boot sector" */
/* SPI */
#define CONFIG_SPI_FLASH_SIZE (4 << 20)
#include "tegra-common-post.h"
#endif /* __CONFIG_H */

3
include/configs/vinco.h
View file

@ -39,9 +39,6 @@
/* USB device */
/* Ethernet Hardware */
#define CONFIG_MACB_SEARCH_PHY
#ifdef CONFIG_SPI_BOOT
/* bootstrap + u-boot + env + linux in serial flash */
/* Use our own mapping for the VInCo platform */

16
include/configs/x86-common.h
View file

@ -10,22 +10,6 @@
#ifndef __CONFIG_X86_COMMON_H
#define __CONFIG_X86_COMMON_H
/*
* High Level Configuration Options
* (easy to change)
*/
/* Generic TPM interfaced through LPC bus */
#define CONFIG_TPM_TIS_BASE_ADDRESS 0xfed40000
/*-----------------------------------------------------------------------
* Serial Configuration
*/
/*
* Miscellaneous configurable options
*/
/*-----------------------------------------------------------------------
* CPU Features
*/

7
include/configs/xpress.h
View file

@ -34,9 +34,6 @@
#define CONFIG_FEC_ENET_DEV 0
#define CONFIG_FEC_MXC_PHYADDR 0x0
#define CONFIG_UBOOT_SECTOR_START 0x2
#define CONFIG_UBOOT_SECTOR_COUNT 0x3fe
#define CONFIG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
"image=zImage\0" \
@ -75,8 +72,8 @@
"bootz; " \
"fi;\0" \
"uboot=ccv/u-boot.imx\0" \
"uboot_start="__stringify(CONFIG_UBOOT_SECTOR_START)"\0" \
"uboot_size="__stringify(CONFIG_UBOOT_SECTOR_COUNT)"\0" \
"uboot_start=0x2\0" \
"uboot_size=0x3fe\0" \
"update_uboot=if tftp ${uboot}; then " \
"if itest ${filesize} > 0; then " \
"mmc dev 0 1;" \