u-boot/arch/arm/dts
Tom Warren 7c02bc9649 ARM: tegra: Add NVIDIA Jetson Nano Developer Kit support
The Jetson Nano Developer Kit is a Tegra X1-based development board. It
is similar to Jetson TX1 but it is not pin compatible. It features 4GB
of LPDDR4, a SPI NOR flash for early boot firmware and an SD card slot
used for storage.

HDMI 2.0 or DP 1.2 are available for display, four USB ports (3 USB 2.0
and 1 USB 3.0) can be used to attach a variety of peripherals and a PCI
Ethernet controller provides onboard network connectivity. NVMe support
has also been added. Env save is at the end of QSPI (4MB-8K).

A 40-pin header on the board can be used to extend the capabilities and
exposed interfaces of the Jetson Nano.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
2020-04-02 14:30:02 -07:00
..
include
am33xx-clocks.dtsi arm: dts: am33xx: Sync dts with Linux 4.20.0 2018-12-07 08:13:51 -05:00
am33xx-u-boot.dtsi arm: dts: am33xx: introduce 'am33xx-u-boot.dtsi' 2019-02-06 14:07:23 -05:00
am33xx.dtsi arm: dts: am33xx: Sync dts with Linux 4.20.0 2018-12-07 08:13:51 -05:00
am35xx-clocks.dtsi arm: dts: am3517_evm: Sync DTS files with Linux 4.13-RC5 2017-09-29 14:07:54 -04:00
am43x-epos-evm.dts arm: dts: am437x: sync cpsw/mdio/phy with latest linux - drop phy_id 2019-11-03 09:15:46 -05:00
am43xx-clocks.dtsi am437x: Add am437x_gp_evm_defconfig using CONFIG_DM 2015-10-22 14:44:00 -04:00
am57xx-beagle-x15-common.dtsi ARM: dts: am57xx: Disable voltage switching for SD card 2019-07-26 22:24:11 -04:00
am57xx-beagle-x15-revb1.dts ARM: dts: am57xx: Disable voltage switching for SD card 2019-07-26 22:24:11 -04:00
am57xx-beagle-x15-revc.dts ARM: dts: am57xx: Disable voltage switching for SD card 2019-07-26 22:24:11 -04:00
am57xx-beagle-x15.dts dts: am57xx-beagle-x15: disable UHS and HS200 support 2018-02-19 16:58:55 +09:00
am57xx-commercial-grade.dtsi ARM: dts: am574x-idk: Add initial support 2018-01-19 15:49:27 -05:00
am57xx-idk-common-u-boot.dtsi board: ti: am57xx-idk: Configure the CDCE913 clock synthesizer 2019-10-11 13:32:39 -04:00
am57xx-idk-common.dtsi arm: dts: dra7: sync cpsw/mdio/phy with latest linux - drop phy_id 2019-11-03 09:15:46 -05:00
am57xx-industrial-grade.dtsi ARM: dts: am574x-idk: Add initial support 2018-01-19 15:49:27 -05:00
am335x-baltos.dts arm: dts: am335x: sync cpsw/mdio/phy with latest linux - drop phy_id 2019-11-03 09:15:46 -05:00
am335x-base0033.dts am335x: igep003x: Add Device Tree Support and DM_MMC driver 2019-01-15 15:28:42 -05:00
am335x-bone-common.dtsi arm: dts: am335x: sync cpsw/mdio/phy with latest linux - drop phy_id 2019-11-03 09:15:46 -05:00
am335x-bone.dts ARM: dts: am335x-bone: Enable uart and timer 2016-05-27 15:47:48 -04:00
am335x-boneblack.dts arm: dts: am335x-boneblack: add tick-timer to chosen node 2016-01-20 19:06:21 -07:00
am335x-bonegreen.dts ARM: dts: AM335x-BBG: Add initial support 2016-05-27 15:47:49 -04:00
am335x-brppt1-mmc.dts board/BuR/brppt1: convert brppt1 boards to driver model 2018-07-19 17:03:35 -04:00
am335x-brppt1-nand.dts board/BuR/brppt1: convert brppt1 boards to driver model 2018-07-19 17:03:35 -04:00
am335x-brppt1-spi.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
am335x-brsmarc1.dts dts: am335x-brsmarc1/xre1: insert phy_id again 2019-12-13 13:01:12 -05:00
am335x-brxre1.dts dts: am335x-brsmarc1/xre1: insert phy_id again 2019-12-13 13:01:12 -05:00
am335x-chiliboard-u-boot.dtsi ARM: dts: am335x-chiliboard: add /chosen/stdout-path 2018-11-26 22:52:13 -05:00
am335x-chiliboard.dts arm: dts: am335x: sync cpsw/mdio/phy with latest linux - drop phy_id 2019-11-03 09:15:46 -05:00
am335x-chilisom.dtsi ARM: dts: am335x-chili*: add chiliSOM and chiliboard DTS files 2018-11-26 22:52:13 -05:00
am335x-draco.dts arm: dts: am335x: sync cpsw/mdio/phy with latest linux - drop phy_id 2019-11-03 09:15:46 -05:00
am335x-draco.dtsi arm, am335x: siemens: enable DM/DTS support 2016-06-17 09:51:05 -04:00
am335x-evm-u-boot.dtsi ARM: DTS: am335x-evm: Use USB0 in peripheral mode 2019-02-01 09:09:40 -05:00
am335x-evm.dts arm: dts: am335x: sync cpsw/mdio/phy with latest linux - drop phy_id 2019-11-03 09:15:46 -05:00
am335x-evmsk.dts arm: dts: am335x: sync cpsw/mdio/phy with latest linux - drop phy_id 2019-11-03 09:15:46 -05:00
am335x-guardian-u-boot.dtsi am335x, guardian: Add support for the bosch guardian board 2019-04-12 08:05:48 -04:00
am335x-guardian.dts am335x, guardian: adapt guardian board to DM 2019-10-11 13:31:18 -04:00
am335x-icev2-u-boot.dtsi board: ti: am335x-ice: Configure the CDCE913 clock synthesizer 2019-10-11 13:32:39 -04:00
am335x-icev2.dts arm: dts: am335x: sync cpsw/mdio/phy with latest linux - drop phy_id 2019-11-03 09:15:46 -05:00
am335x-igep0033.dtsi arm: dts: am335x: sync cpsw/mdio/phy with latest linux - drop phy_id 2019-11-03 09:15:46 -05:00
am335x-osd335x-common.dtsi ti: Add device-tree for am335x-pocketbeagle. 2019-05-03 07:30:31 -04:00
am335x-pdu001-u-boot.dtsi arm: am335x-pdu001: Enable CONFIG_BLK and CONFIG_DM_MMC 2018-12-07 08:13:46 -05:00
am335x-pdu001.dts arm: dts: am335x-pdu001: Sync with Linux 5.0-rc2 2019-01-18 13:40:35 -05:00
am335x-phycore-som.dtsi ARM: am335x: Add phyCORE AM335x R2 support 2019-07-13 11:11:28 -04:00
am335x-pocketbeagle.dts ti: Add device-tree for am335x-pocketbeagle. 2019-05-03 07:30:31 -04:00
am335x-pxm2.dtsi arm: dts: am335x: sync cpsw/mdio/phy with latest linux - drop phy_id 2019-11-03 09:15:46 -05:00
am335x-pxm50.dts arm, am335x: siemens: enable DM/DTS support 2016-06-17 09:51:05 -04:00
am335x-rut.dts arm: dts: am335x: sync cpsw/mdio/phy with latest linux - drop phy_id 2019-11-03 09:15:46 -05:00
am335x-shc-u-boot.dtsi ARM: dts: am335x-shc: add u-boot specific dtsi 2019-02-01 09:09:40 -05:00
am335x-shc.dts arm: dts: am335x: sync cpsw/mdio/phy with latest linux - drop phy_id 2019-11-03 09:15:46 -05:00
am335x-sl50.dts arm: dts: am335x: sync cpsw/mdio/phy with latest linux - drop phy_id 2019-11-03 09:15:46 -05:00
am335x-wega-rdk-u-boot.dtsi ARM: am335x: Add phyCORE AM335x R2 support 2019-07-13 11:11:28 -04:00
am335x-wega-rdk.dts ARM: am335x: Add phyCORE AM335x R2 support 2019-07-13 11:11:28 -04:00
am335x-wega.dtsi ARM: am335x: Add phyCORE AM335x R2 support 2019-07-13 11:11:28 -04:00
am437x-cm-t43.dts arm: am437x: cm-t43: Add device tree, enable OF_CONTROL 2019-09-13 11:56:08 -04:00
am437x-gp-evm-u-boot.dtsi arm: dts: am437x-gp-evm: Add some nodes to u-boot.dtsi 2020-02-13 21:39:17 +05:30
am437x-gp-evm.dts arm: dts: am437x: sync cpsw/mdio/phy with latest linux - drop phy_id 2019-11-03 09:15:46 -05:00
am437x-idk-evm-u-boot.dtsi board: ti: am43xx-idk: Configure the CDCE913 clock synthesizer 2019-10-11 13:32:39 -04:00
am437x-idk-evm.dts arm: dts: am437x: sync cpsw/mdio/phy with latest linux - drop phy_id 2019-11-03 09:15:46 -05:00
am437x-sk-evm-u-boot.dtsi dts: Add a u-boot specific dtsi file for the am4372 2018-12-14 17:59:09 +01:00
am437x-sk-evm.dts arm: dts: am437x: sync cpsw/mdio/phy with latest linux - drop phy_id 2019-11-03 09:15:46 -05:00
am571x-idk-u-boot.dtsi board: ti: am57xx-idk: Configure the CDCE913 clock synthesizer 2019-10-11 13:32:39 -04:00
am571x-idk.dts ARM: dts: am57xx: Disable voltage switching for SD card 2019-07-26 22:24:11 -04:00
am572x-idk-common.dtsi ARM: dts: am574x-idk: Add initial support 2018-01-19 15:49:27 -05:00
am572x-idk-u-boot.dtsi board: ti: am57xx-idk: Configure the CDCE913 clock synthesizer 2019-10-11 13:32:39 -04:00
am572x-idk.dts ARM: dts: am57xx: Disable voltage switching for SD card 2019-07-26 22:24:11 -04:00
am574x-idk-u-boot.dtsi board: ti: am57xx-idk: Configure the CDCE913 clock synthesizer 2019-10-11 13:32:39 -04:00
am574x-idk.dts ARM: dts: am574x-idk: Add pinmuxes for mmc1 and mmc2 2019-07-26 22:24:10 -04:00
am3517-evm-u-boot.dtsi ARM: am3517-evm: Migrate to SPL_OF_CONTROL 2019-07-26 22:24:12 -04:00
am3517-evm-ui.dtsi ARM: DTS: Resync am3517-evm.dts with Linux 4.20 2018-12-07 08:13:48 -05:00
am3517-evm.dts ARM: DTS: Resync am3517-evm.dts with Linux 5.0-rc3 2019-02-01 09:14:21 -05:00
am3517-som.dtsi ARM: DTS: Resync am3517-evm.dts with Linux 4.20 2018-12-07 08:13:48 -05:00
am3517-u-boot.dtsi SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
am3517.dtsi ARM: DTS: Resync am3517-evm.dts with Linux 4.19 2018-11-16 13:34:37 -05:00
am4372-generic-u-boot.dtsi dts: Add a u-boot specific dtsi file for the am4372 2018-12-14 17:59:09 +01:00
am4372-generic.dts SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
am4372-u-boot.dtsi ARM: DTS: am43xx: Enable the DTS entries for USB port #2 in SPL 2019-02-01 09:14:21 -05:00
am4372.dtsi arm: dts: am33xx: Sync dts with Linux 4.20.0 2018-12-07 08:13:51 -05:00
am5729-beagleboneai.dts board: ti: beagleboneai: add dts file 2020-01-20 10:10:28 +05:30
armada-37xx.dtsi watchdog: Add support for Armada 37xx CPU watchdog 2018-05-14 10:00:15 +02:00
armada-38x-controlcenterdc.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
armada-38x-solidrun-microsom.dtsi ARM: mvebu: clearfog: add EEPROM devices 2020-01-21 15:55:46 +01:00
armada-38x.dtsi ARM: mvebu: sync Armada-38x dts with Linux 4.20 2019-01-21 11:39:49 +01:00
armada-370-xp.dtsi arm: mvebu: armada-370-xp.dtsi: Add "u-boot, dm-pre-reloc" to "internal-regs" 2019-05-20 09:27:36 +02:00
armada-371x.dtsi arm64: mvebu: Armada 3700: Add Armada 37xx dts files 2016-09-27 17:29:53 +02:00
armada-372x.dtsi arm64: mvebu: Armada 3700: Add Armada 37xx dts files 2016-09-27 17:29:53 +02:00
armada-375-db.dts arm: mvebu: Add basic support for Armada 375 eval board db-88f6720 2016-04-04 11:22:10 +02:00
armada-375.dtsi arm: mvebu: armada-xp/37x.dtsi: Sync PCIe DT nodes with Linux v4.20 2019-02-05 14:22:49 +01:00
armada-380.dtsi ARM: mvebu: sync Armada-38x dts with Linux 4.20 2019-01-21 11:39:49 +01:00
armada-385-atl-x530-u-boot.dtsi arm: mvebu: x530: Enable watchdog in SPL and U-Boot 2019-04-12 07:04:18 +02:00
armada-385-atl-x530.dts ARM: mvebu: add support for Allied Telesis x530 2019-01-21 11:39:50 +01:00
armada-385-atl-x530.dtsi ARM: mvebu: add support for Allied Telesis x530 2019-01-21 11:39:50 +01:00
armada-385-atl-x530DP.dts ARM: mvebu: add support for Allied Telesis x530 2019-01-21 11:39:50 +01:00
armada-385-atl-x530DP.dtsi ARM: mvebu: add support for Allied Telesis x530 2019-01-21 11:39:50 +01:00
armada-385-db-88f6820-amc.dts ARM: mvebu: sync db-88f6820-amc.dts with Linux v5.0 2019-04-12 07:20:20 +02:00
armada-385-turris-omnia-u-boot.dtsi dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
armada-385-turris-omnia.dts ARM: mvebu: use correct name for pcie controller 2019-03-19 09:22:05 +01:00
armada-385.dtsi ARM: mvebu: sync Armada-38x dts with Linux 4.20 2019-01-21 11:39:49 +01:00
armada-388-clearfog-u-boot.dtsi ARM: mvebu: clearfog: add EEPROM devices 2020-01-21 15:55:46 +01:00
armada-388-clearfog.dts ARM: mvebu: clearfog: add EEPROM devices 2020-01-21 15:55:46 +01:00
armada-388-gp.dts ARM: mvebu: use correct name for pcie controller 2019-03-19 09:22:05 +01:00
armada-388-helios4-u-boot.dtsi arm: mvebu: helios4: add MMC to SPL DT 2019-06-04 08:33:24 +02:00
armada-388-helios4.dts arm: mvebu: helios4: remove duplicate sdhci pins node 2018-08-07 10:53:52 +02:00
armada-388.dtsi ARM: mvebu: sync Armada-38x dts with Linux 4.20 2019-01-21 11:39:49 +01:00
armada-3720-db.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
armada-3720-espressobin.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
armada-3720-turris-mox.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
armada-3720-uDPU-u-boot.dtsi arm64: mvebu: Add basic support for uDPU board 2019-02-05 14:23:06 +01:00
armada-3720-uDPU.dts arm64: mvebu: Add basic support for uDPU board 2019-02-05 14:23:06 +01:00
armada-7040-db-nand.dts arm64: a8k: dts: Add support for NAND devices on A8K platform 2017-05-09 13:38:18 +02:00
armada-7040-db.dts arm64: mvebu: armada-7040-db: Enable 10GB port 0 / SFI (KR) 2017-05-31 07:39:06 +02:00
armada-7040.dtsi arm64: mvebu: gpio: Add GPIO nodes to A8K family devices 2017-03-29 07:38:08 +02:00
armada-8020.dtsi arm64: mvebu: Add Armada-80x0 dts/dtsi files 2016-12-05 13:28:23 +01:00
armada-8040-clearfog-gt-8k.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
armada-8040-db.dts dts: mvebu: a80x0: Enable SD/eMMC interfaces 2018-05-29 08:33:05 +02:00
armada-8040-mcbin.dts arm: mvebu: mcbin: dts: fix PCIe reset polarity 2019-02-11 09:39:12 +01:00
armada-8040.dtsi arm64: mvebu: gpio: Add GPIO nodes to A8K family devices 2017-03-29 07:38:08 +02:00
armada-ap806-quad.dtsi arm64: mvebu: Armada 7K/8K: Add Armada 7K/8K dts files 2016-09-27 17:29:54 +02:00
armada-ap806.dtsi arm64: dts: marvell: armada-ap806: reserve PSCI area 2019-01-21 11:39:50 +01:00
armada-cp110-master.dtsi arm: dts: armada-cp110-*dtsi: add xmdio nodes 2019-12-09 09:47:42 -06:00
armada-cp110-slave.dtsi arm: dts: armada-cp110-*dtsi: add xmdio nodes 2019-12-09 09:47:42 -06:00
armada-xp-98dx3236.dtsi arm: mvebu: Add DB-XC3-24G4XG board 2019-04-12 07:04:18 +02:00
armada-xp-98dx3336.dtsi arm: mvebu: Add DB-XC3-24G4XG board 2019-04-12 07:04:18 +02:00
armada-xp-98dx4251.dtsi arm: mvebu: Add DB-XC3-24G4XG board 2019-04-12 07:04:18 +02:00
armada-xp-crs305-1g-4s-u-boot.dtsi arm: mvebu: Add CRS305-1G-4S board 2019-05-09 07:35:04 +02:00
armada-xp-crs305-1g-4s.dts arm: mvebu: Add CRS305-1G-4S board 2019-05-09 07:35:04 +02:00
armada-xp-db-xc3-24g4xg-u-boot.dtsi arm: mvebu: Add DB-XC3-24G4XG board 2019-04-12 07:04:18 +02:00
armada-xp-db-xc3-24g4xg.dts arm: mvebu: Add DB-XC3-24G4XG board 2019-04-12 07:04:18 +02:00
armada-xp-gp.dts arm: sync armada-xp dts files from Linux 5.0 2019-04-12 07:04:18 +02:00
armada-xp-maxbcm.dts arm: sync armada-xp dts files from Linux 5.0 2019-04-12 07:04:18 +02:00
armada-xp-mv78230.dtsi arm: sync armada-xp dts files from Linux 5.0 2019-04-12 07:04:18 +02:00
armada-xp-mv78260.dtsi arm: sync armada-xp dts files from Linux 5.0 2019-04-12 07:04:18 +02:00
armada-xp-mv78460.dtsi arm: sync armada-xp dts files from Linux 5.0 2019-04-12 07:04:18 +02:00
armada-xp-synology-ds414.dts arm: sync armada-xp dts files from Linux 5.0 2019-04-12 07:04:18 +02:00
armada-xp-theadorable.dts Merge branch 'master' of git://git.denx.de/u-boot-spi 2019-04-14 00:03:06 -04:00
armada-xp.dtsi arm: sync armada-xp dts files from Linux 5.0 2019-04-12 07:04:18 +02:00
armv7-m.dtsi ARM: DTS: stm32: add stm32f746-disco device tree files 2017-01-28 14:04:42 -05:00
ast2500-evb.dts ARM: dts: ast2500: Add SDHCI nodes 2019-09-05 15:27:31 +08:00
ast2500-u-boot.dtsi ARM: dts: ast2500: Add SDHCI nodes 2019-09-05 15:27:31 +08:00
ast2500.dtsi aspeed: Update ast2500 SoC DTS file to Linux v4.17-rc6 level 2018-11-05 10:41:58 -06:00
at91-sama5d2_icp-u-boot.dtsi board: atmel: add SAMA5D2 ICP board 2019-04-18 09:43:22 +03:00
at91-sama5d2_icp.dts ARM: dts: at91-sama5d2-icp: Add MACB node 2019-04-18 09:43:22 +03:00
at91-sama5d2_ptc_ek.dts ARM: dts: at91: sama5d2_ptc: add onewire connector for LCD eeprom 2018-09-28 20:22:43 -04:00
at91-sama5d2_xplained.dts ARM: dts: at91: sama5d2_xplained: fix QSPI0 node 2019-07-09 09:26:43 +03:00
at91-sama5d3_xplained.dts ARM: dts: at91: sama5d3_xplained: add onewire connector for LCD eeprom 2018-09-28 20:22:43 -04:00
at91-sama5d4_xplained.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
at91-sama5d4ek.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
at91-sama5d27_som1_ek.dts ARM: dts: at91: sama5d27_som1_ek: add onewire connector for LCD eeprom 2018-09-28 20:22:43 -04:00
at91-sama5d27_wlsom1_ek-u-boot.dtsi ARM: dts: at91: sama5d27_wlsom1: add hlcdc node 2019-10-08 09:16:11 +03:00
at91-sama5d27_wlsom1_ek.dts ARM: dts: at91: sama5d27_wlsom1: add hlcdc node 2019-10-08 09:16:11 +03:00
at91-vinco.dts at91: fix devicetree warnings 2018-09-10 20:48:18 -04:00
at91sam9g15.dtsi ARM: dts: at91: Add dts files for at91sam9x5ek 2017-05-09 12:14:15 -06:00
at91sam9g15ek.dts ARM: dts: at91: Add dts files for at91sam9x5ek 2017-05-09 12:14:15 -06:00
at91sam9g20-taurus.dts at91: cleanup taurus port 2019-05-03 07:30:31 -04:00
at91sam9g20.dtsi ARM: dts: at91: Add dts files for at91sam9260ek/9g20ek 2017-05-09 12:14:15 -06:00
at91sam9g20ek.dts ARM: dts: at91: Add dts files for at91sam9260ek/9g20ek 2017-05-09 12:14:15 -06:00
at91sam9g20ek_2mmc.dts ARM: dts: at91: Add dts files for at91sam9260ek/9g20ek 2017-05-09 12:14:15 -06:00
at91sam9g20ek_common.dtsi board: at91sam9260ek: Use SPI-flash-based AT45xxx DataFlash 2017-08-04 20:38:36 -04:00
at91sam9g25-gardena-smart-gateway-u-boot.dtsi arm: at91: Add gardena-gateway-at91sam support 2019-04-09 09:28:50 +03:00
at91sam9g25-gardena-smart-gateway.dts arm: at91: Add gardena-gateway-at91sam support 2019-04-09 09:28:50 +03:00
at91sam9g25.dtsi ARM: dts: at91: Add dts files for at91sam9x5ek 2017-05-09 12:14:15 -06:00
at91sam9g25ek.dts ARM: dts: at91: Add dts files for at91sam9x5ek 2017-05-09 12:14:15 -06:00
at91sam9g35.dtsi ARM: dts: at91: Add dts files for at91sam9x5ek 2017-05-09 12:14:15 -06:00
at91sam9g35ek.dts ARM: dts: at91: Add dts files for at91sam9x5ek 2017-05-09 12:14:15 -06:00
at91sam9g45-corvus.dts SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
at91sam9g45-gurnard.dts arm: at91: Add support for gurnard 2016-06-12 23:49:38 +02:00
at91sam9g45.dtsi at91: fix devicetree warnings 2018-09-10 20:48:18 -04:00
at91sam9m10g45ek.dts ARM: dts: at91: Add dts files for at91sam9m10g45ek 2017-05-09 12:14:15 -06:00
at91sam9n12.dtsi at91: fix devicetree warnings 2018-09-10 20:48:18 -04:00
at91sam9n12ek.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
at91sam9rl.dtsi at91: fix devicetree warnings 2018-09-10 20:48:18 -04:00
at91sam9rlek.dts ARM: dts: at91: Add dts files for at91sam9rlek 2017-05-09 12:14:15 -06:00
at91sam9x5.dtsi arm: at91: at91sam9x5.dtsi: Add watchdog handle 2019-04-09 09:28:50 +03:00
at91sam9x5_can.dtsi ARM: dts: at91: Add dts files for at91sam9x5ek 2017-05-09 12:14:15 -06:00
at91sam9x5_isi.dtsi ARM: dts: at91: Add dts files for at91sam9x5ek 2017-05-09 12:14:15 -06:00
at91sam9x5_lcd.dtsi ARM: dts: at91: Add dts files for at91sam9x5ek 2017-05-09 12:14:15 -06:00
at91sam9x5_macb0.dtsi ARM: dts: at91: Add dts files for at91sam9x5ek 2017-05-09 12:14:15 -06:00
at91sam9x5_macb1.dtsi ARM: dts: at91: Add dts files for at91sam9x5ek 2017-05-09 12:14:15 -06:00
at91sam9x5_usart3.dtsi ARM: dts: at91: Add dts files for at91sam9x5ek 2017-05-09 12:14:15 -06:00
at91sam9x5cm.dtsi ARM: dts: at91: Add dts files for at91sam9x5ek 2017-05-09 12:14:15 -06:00
at91sam9x5dm.dtsi ARM: dts: at91: Add dts files for at91sam9x5ek 2017-05-09 12:14:15 -06:00
at91sam9x5ek.dtsi dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
at91sam9x25.dtsi ARM: dts: at91: Add dts files for at91sam9x5ek 2017-05-09 12:14:15 -06:00
at91sam9x25ek.dts ARM: dts: at91: Add dts files for at91sam9x5ek 2017-05-09 12:14:15 -06:00
at91sam9x35.dtsi ARM: dts: at91: Add dts files for at91sam9x5ek 2017-05-09 12:14:15 -06:00
at91sam9x35ek.dts ARM: dts: at91: Add dts files for at91sam9x5ek 2017-05-09 12:14:15 -06:00
at91sam9xe.dtsi board: ethernut5: Update to support DT and DM 2017-08-04 20:38:37 -04:00
at91sam9260-smartweb.dts arm: at91: wdt: Convert watchdog driver to dm/dt 2018-11-16 13:34:34 -05:00
at91sam9260.dtsi at91sam9260.dtsi: add some labels 2019-04-15 17:18:59 +03:00
at91sam9260ek.dts board: at91sam9260ek: Use SPI-flash-based AT45xxx DataFlash 2017-08-04 20:38:36 -04:00
at91sam9261.dtsi at91: fix devicetree warnings 2018-09-10 20:48:18 -04:00
at91sam9261ek.dts board: at91sam9261ek: Update to support DT and DM 2017-08-04 20:38:35 -04:00
at91sam9263.dtsi at91: fix devicetree warnings 2018-09-10 20:48:18 -04:00
at91sam9263ek.dts board: at91sam9263ek: Use SPI-flash-based AT45xxx DataFlash 2017-08-04 20:38:35 -04:00
avnet-ultra96-rev1.dts arm64: zynqmp: Add support for Avnet Ultra96 2018-08-06 08:44:35 +02:00
avnet-ultrazedev-cc-v1.0-ultrazedev-som-v1.0.dts arm64: zynqmp: add support for Avnet UltraZed-EV Starter Kit 2019-07-30 10:20:06 +02:00
avnet-ultrazedev-som-v1.0.dtsi arm64: zynqmp: add support for Avnet UltraZed-EV Starter Kit 2019-07-30 10:20:06 +02:00
axp22x.dtsi sunxi: sina33: Sync the device tree with the kernel 2017-10-03 19:12:05 +02:00
axp81x.dtsi ARM: dts: sun8i: Update A83T dts(i) files from Linux-v4.18-rc3 2018-08-13 13:07:35 +05:30
axp152.dtsi
axp209.dtsi ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
axp223.dtsi sunxi: sina33: Sync the device tree with the kernel 2017-10-03 19:12:05 +02:00
axp803.dtsi sunxi: DT: A64: update board .dts files from Linux 2018-07-16 12:02:41 +05:30
axp809.dtsi sunxi: Sync dts files with upstream kernel 2016-08-26 16:58:36 +02:00
bcm283x-rpi-lan7515.dtsi fdt: update bcm283x device tree sources to Linux 5.1-rc6 state 2019-06-12 12:23:46 +02:00
bcm283x-rpi-smsc9512.dtsi fdt: update bcm283x device tree sources to Linux 5.1-rc6 state 2019-06-12 12:23:46 +02:00
bcm283x-rpi-smsc9514.dtsi fdt: update bcm283x device tree sources to Linux 4.14 state 2017-10-16 09:42:51 -04:00
bcm283x-rpi-usb-host.dtsi fdt: update bcm283x device tree sources to Linux 4.14 state 2017-10-16 09:42:51 -04:00
bcm283x-rpi-usb-otg.dtsi fdt: update bcm283x device tree sources to Linux 5.1-rc6 state 2019-06-12 12:23:46 +02:00
bcm283x-u-boot.dtsi arm: dts: bcm283x: Rename U-Boot file 2019-11-24 10:46:27 +01:00
bcm283x.dtsi fdt: update bcm283x device tree sources to Linux 5.1-rc6 state 2019-06-12 12:23:46 +02:00
bcm2835-rpi-a-plus.dts fdt: update bcm283x device tree sources to Linux 5.1-rc6 state 2019-06-12 12:23:46 +02:00
bcm2835-rpi-a.dts fdt: update bcm283x device tree sources to Linux 5.1-rc6 state 2019-06-12 12:23:46 +02:00
bcm2835-rpi-b-plus.dts fdt: update bcm283x device tree sources to Linux 5.1-rc6 state 2019-06-12 12:23:46 +02:00
bcm2835-rpi-b-rev2.dts fdt: update bcm283x device tree sources to Linux 5.1-rc6 state 2019-06-12 12:23:46 +02:00
bcm2835-rpi-b.dts fdt: update bcm283x device tree sources to Linux 5.1-rc6 state 2019-06-12 12:23:46 +02:00
bcm2835-rpi-cm1-io1.dts fdt: update bcm283x device tree sources to Linux 5.1-rc6 state 2019-06-12 12:23:46 +02:00
bcm2835-rpi-cm1.dtsi fdt: update bcm283x device tree sources to Linux 5.1-rc6 state 2019-06-12 12:23:46 +02:00
bcm2835-rpi-zero-w.dts fdt: update bcm283x device tree sources to Linux 5.1-rc6 state 2019-06-12 12:23:46 +02:00
bcm2835-rpi-zero.dts fdt: update bcm283x device tree sources to Linux 5.1-rc6 state 2019-06-12 12:23:46 +02:00
bcm2835-rpi.dtsi fdt: update bcm283x device tree sources to Linux 5.1-rc6 state 2019-06-12 12:23:46 +02:00
bcm2835.dtsi fdt: update bcm283x device tree sources to Linux 5.1-rc6 state 2019-06-12 12:23:46 +02:00
bcm2836-rpi-2-b.dts fdt: update bcm283x device tree sources to Linux 5.1-rc6 state 2019-06-12 12:23:46 +02:00
bcm2836-rpi.dtsi fdt: update bcm283x device tree sources to Linux 5.1-rc6 state 2019-06-12 12:23:46 +02:00
bcm2836.dtsi fdt: update bcm283x device tree sources to Linux 5.1-rc6 state 2019-06-12 12:23:46 +02:00
bcm2837-rpi-3-a-plus.dts fdt: update bcm283x device tree sources to Linux 5.1-rc6 state 2019-06-12 12:23:46 +02:00
bcm2837-rpi-3-b-plus.dts fdt: update bcm283x device tree sources to Linux 5.1-rc6 state 2019-06-12 12:23:46 +02:00
bcm2837-rpi-3-b.dts fdt: update bcm283x device tree sources to Linux 5.1-rc6 state 2019-06-12 12:23:46 +02:00
bcm2837-rpi-cm3-io3.dts fdt: update bcm283x device tree sources to Linux 5.1-rc6 state 2019-06-12 12:23:46 +02:00
bcm2837-rpi-cm3.dtsi fdt: update bcm283x device tree sources to Linux 5.1-rc6 state 2019-06-12 12:23:46 +02:00
bcm2837.dtsi fdt: update bcm283x device tree sources to Linux 5.1-rc6 state 2019-06-12 12:23:46 +02:00
bcm6858.dtsi dt: bcm6858: add hsspi controller 2019-10-11 10:09:16 -04:00
bcm63158.dtsi dt: bcm63158: Add hsspi controller 2019-10-11 10:09:16 -04:00
bcm68360.dtsi bcm68360: add initial support 2020-01-23 07:29:58 -05:00
bcm963158.dts dt: bcm963158: add a spi-nor device 2019-10-11 10:09:16 -04:00
bcm968360bg.dts bcm968360bg: add initial support 2020-01-23 07:29:58 -05:00
bcm968580xref.dts dt: bcm968580xref: add a spi-nor device 2019-10-11 10:09:16 -04:00
bitmain-antminer-s9.dts arm: zynq: Add support for Bitmain Antminer S9 control board 2018-05-31 13:50:39 +02:00
bubblegum_96.dts arm: dts: bubblegum_96: Enable UART5 for serial console 2018-07-09 15:25:37 -04:00
ca-presidio-engboard.dts board: presidio-asic: Add basic G3 engr. development board support 2020-02-07 16:16:01 -05:00
cros-ec-keyboard.dtsi
cros-ec-sbs.dtsi SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
da850-evm-u-boot.dtsi ARM: dts: da850-evm: Fix MDIO pinmux 2019-07-31 13:08:07 -04:00
da850-evm.dts ARM: dts: da850-evm: Re-sync with Kernel 5.0 2019-02-01 09:14:21 -05:00
da850-lcdk-u-boot.dtsi ARM: dts: da850-lcdk: Update DTS files for SPL device tree support 2020-01-20 10:10:28 +05:30
da850-lcdk.dts ARM: dts: da850-lcdk: Update DTS files for SPL device tree support 2020-01-20 10:10:28 +05:30
da850-lego-ev3.dts ARM: legoev3: convert to driver model 2019-07-13 11:11:28 -04:00
da850.dtsi ARM: dts: da850: Resync with Linux 5.1.9 2019-07-13 11:11:30 -04:00
dm816x-clocks.dtsi ti816x: Import dts files from Linux Kernel v4.11 2017-06-05 11:02:25 -04:00
dm816x.dtsi arm: dts: am33xx: Sync dts with Linux 4.20.0 2018-12-07 08:13:51 -05:00
dm8168-evm.dts ti816x: Import dts files from Linux Kernel v4.11 2017-06-05 11:02:25 -04:00
dra7-dspeve-thermal.dtsi ARM: dts: dra7xx: sync DT with latest Linux 2016-12-04 13:54:51 -05:00
dra7-evm-common.dtsi arm: dts: dra7: sync DT with latest Linux 2017-09-11 16:19:48 -04:00
dra7-evm-u-boot.dtsi ARM: dts: dra7: Add usb peripheral nodes in spl 2019-10-25 17:33:21 -04:00
dra7-evm.dts arm: dts: dra7: sync cpsw/mdio/phy with latest linux - drop phy_id 2019-11-03 09:15:46 -05:00
dra7-iva-thermal.dtsi ARM: dts: dra7xx: sync DT with latest Linux 2016-12-04 13:54:51 -05:00
dra7-mmc-iodelay.dtsi ARM: dts: dra7-mmc-iodelay: Add a new pinctrl group for clk line without pullup 2019-07-26 22:24:10 -04:00
dra7.dtsi ARM: dts: dra7: Change pbias voltage to 3.3V 2019-04-12 08:05:56 -04:00
dra7xx-clocks.dtsi arm: dts: dra7: sync DT with latest Linux 2017-09-11 16:19:48 -04:00
dra71-evm-u-boot.dtsi ARM: dts: dra7: Add usb peripheral nodes in spl 2019-10-25 17:33:21 -04:00
dra71-evm.dts arm: dts: dra7: sync cpsw/mdio/phy with latest linux - drop phy_id 2019-11-03 09:15:46 -05:00
dra72-evm-common.dtsi arm: dts: dra7: sync DT with latest Linux 2017-09-11 16:19:48 -04:00
dra72-evm-revc-u-boot.dtsi ARM: dts: dra7: Add usb peripheral nodes in spl 2019-10-25 17:33:21 -04:00
dra72-evm-revc.dts arm: dts: dra7: sync cpsw/mdio/phy with latest linux - drop phy_id 2019-11-03 09:15:46 -05:00
dra72-evm-tps65917.dtsi arm: dts: dra7: sync DT with latest Linux 2017-09-11 16:19:48 -04:00
dra72-evm-u-boot.dtsi ARM: dts: dra7: Add usb peripheral nodes in spl 2019-10-25 17:33:21 -04:00
dra72-evm.dts arm: dts: dra7: sync cpsw/mdio/phy with latest linux - drop phy_id 2019-11-03 09:15:46 -05:00
dra72x-mmc-iodelay.dtsi arm: dts: dra7: sync DT with latest Linux 2017-09-11 16:19:48 -04:00
dra72x.dtsi arm: dts: dra7: sync DT with latest Linux 2017-09-11 16:19:48 -04:00
dra74x-mmc-iodelay.dtsi ARM: dts: dra74x: Fix iodelay configuration for mmc3 2019-09-13 11:56:30 -04:00
dra74x.dtsi arm: dts: dra7: sync DT with latest Linux 2017-09-11 16:19:48 -04:00
dra76-evm-u-boot.dtsi ARM: dts: dra7: Add usb peripheral nodes in spl 2019-10-25 17:33:21 -04:00
dra76-evm.dts arm: dts: dra7: sync cpsw/mdio/phy with latest linux - drop phy_id 2019-11-03 09:15:46 -05:00
dra76x-mmc-iodelay.dtsi ARM: dts: dra76x: Update MMC2_HS200_MANUAL1 iodelay values 2019-07-26 22:24:11 -04:00
dra76x.dtsi arm: dts: dra7: sync DT with latest Linux 2017-09-11 16:19:48 -04:00
dragonboard410c-uboot.dtsi dts: db410: fix indentation 2019-01-18 09:16:15 -05:00
dragonboard410c.dts dts: db410c: Add bindings for MSM USB phy 2018-09-30 13:00:36 -04:00
dragonboard820c-uboot.dtsi dts: 820c: Add pinctrl node and uart mux 2019-01-25 12:12:56 -05:00
dragonboard820c.dts dts: 820c: Add pinctrl node and uart mux 2019-01-25 12:12:56 -05:00
ethernut5.dts ARM: dts: ethernut5: Fix the build warning 2017-09-13 09:24:25 -04:00
exynos4.dtsi SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
exynos4x12-pinctrl-uboot.dtsi arm: exynos4: fix warning of dts 2018-08-06 11:24:42 +09:00
exynos4x12-pinctrl.dtsi
exynos4x12.dtsi arm: dts: exynos4: fix the device-tree compile warning 2017-12-05 10:18:39 +09:00
exynos5.dtsi arm: exynos5: fix warning of dts 2018-08-06 11:24:45 +09:00
exynos54xx-pinctrl-uboot.dtsi arm: exynos5: fix warning of dts 2018-08-06 11:24:45 +09:00
exynos54xx-pinctrl.dtsi
exynos54xx.dtsi dm: exynos: sound: Convert to use driver model 2018-12-13 16:36:30 -07:00
exynos4210-origen.dts SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
exynos4210-pinctrl-uboot.dtsi arm: exynos4: fix warning of dts 2018-08-06 11:24:42 +09:00
exynos4210-pinctrl.dtsi
exynos4210-smdkv310.dts SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
exynos4210-trats.dts SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
exynos4210-universal_c210.dts arm: exynos4: fix warning of dts 2018-08-06 11:24:42 +09:00
exynos4210.dtsi arm: dts: exynos4: fix the device-tree compile warning 2017-12-05 10:18:39 +09:00
exynos4412-odroid.dts arm: dts: exynos: Use common alias for Odroid U3/X2 MMC2 (SD-card) 2020-01-23 11:43:10 +09:00
exynos4412-trats2.dts SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
exynos4412.dtsi arm: dts: exynos4: fix the device-tree compile warning 2017-12-05 10:18:39 +09:00
exynos5250-arndale.dts SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
exynos5250-pinctrl-uboot.dtsi arm: exynos5: fix warning of dts 2018-08-06 11:24:45 +09:00
exynos5250-pinctrl.dtsi
exynos5250-smdk5250.dts dm: exynos: sound: Convert to use driver model 2018-12-13 16:36:30 -07:00
exynos5250-snow.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
exynos5250-spring.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
exynos5250.dtsi dm: exynos: sound: Convert to use driver model 2018-12-13 16:36:30 -07:00
exynos5420-peach-pit.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
exynos5420-smdk5420.dts dm: exynos: sound: Convert to use driver model 2018-12-13 16:36:30 -07:00
exynos5422-odroidxu3.dts arm: dts: exynos: Extend board description 2020-01-23 11:41:49 +09:00
exynos5800-peach-pi.dts dm: exynos: sound: Convert to use driver model 2018-12-13 16:36:30 -07:00
exynos7420-espresso7420.dts SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
exynos7420.dtsi SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
fsl-imx8-ca35.dtsi arm: dts: i.mx8x: add #cooling-cells properties 2020-01-20 15:38:16 +01:00
fsl-imx8-ca53.dtsi imx: imx8mq: add dtsi file 2018-02-04 12:00:58 +01:00
fsl-imx8dx.dtsi imx: dts: imx8dx: add I2C IPG clock for bus 0 and 2 2020-01-14 22:49:05 +01:00
fsl-imx8dxp.dtsi arm: dts: introduce dtsi for i.MX8QXP 2018-10-22 13:00:09 +02:00
fsl-imx8qm-apalis-u-boot.dtsi board: toradex: add apalis imx8qm 4gb wb it v1.0b module support 2019-06-11 10:42:48 +02:00
fsl-imx8qm-apalis.dts board: toradex: add apalis imx8qm 4gb wb it v1.0b module support 2019-06-11 10:42:48 +02:00
fsl-imx8qm-mek-u-boot.dtsi arm: dts: imx8qm-mek: add u-boot, dm-spl for lpuart0 2019-11-05 10:27:18 +01:00
fsl-imx8qm-mek.dts imx: support i.MX8QM MEK board 2019-04-25 17:03:25 +02:00
fsl-imx8qm.dtsi arm: dts: imx: fsl-imx8qm.dtsi: add gpio aliases to fix gpio command 2019-10-08 16:35:16 +02:00
fsl-imx8qxp-ai_ml-u-boot.dtsi arm: dts: Add devicetree support for iMXQXP AI_ML board 2019-11-03 17:04:16 +01:00
fsl-imx8qxp-ai_ml.dts arm: dts: Add devicetree support for iMXQXP AI_ML board 2019-11-03 17:04:16 +01:00
fsl-imx8qxp-colibri-u-boot.dtsi board: toradex: add colibri imx8qxp 2gb wb it v1.0b module support 2019-06-11 10:42:48 +02:00
fsl-imx8qxp-colibri.dts board: toradex: add colibri imx8qxp 2gb wb it v1.0b module support 2019-06-11 10:42:48 +02:00
fsl-imx8qxp-mek-u-boot.dtsi arm: dts: imx8qxp-mek: add u-boot, dm-spl for lpuart0 2019-11-05 10:27:18 +01:00
fsl-imx8qxp-mek.dts dts: imx8qxp-mek: Add PHY post reset delay 2019-04-08 15:24:39 +02:00
fsl-imx8qxp.dtsi arm: dts: introduce dtsi for i.MX8QXP 2018-10-22 13:00:09 +02:00
fsl-ls1012a-2g5rdb.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
fsl-ls1012a-frdm.dts SPDX: Convert all of our multiple license tags to Linux Kernel style 2018-05-07 10:24:31 -04:00
fsl-ls1012a-frdm.dtsi dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
fsl-ls1012a-frwy.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
fsl-ls1012a-qds.dts SPDX: Convert all of our multiple license tags to Linux Kernel style 2018-05-07 10:24:31 -04:00
fsl-ls1012a-qds.dtsi dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
fsl-ls1012a-rdb.dts SPDX: Convert all of our multiple license tags to Linux Kernel style 2018-05-07 10:24:31 -04:00
fsl-ls1012a-rdb.dtsi dts: armv8: add emmc hs200 support for ls1012ardb 2019-09-12 14:03:10 +05:30
fsl-ls1012a.dtsi ARM: dts: Freescale: Add ecc addr for sata node 2019-05-22 12:24:24 +05:30
fsl-ls1028a-qds.dts arm: dts: ls1028a: Use flexspi in octal I/O mode 2020-03-30 08:12:13 +05:30
fsl-ls1028a-rdb.dts arm: dts: ls1028a: Use flexspi in octal I/O mode 2020-03-30 08:12:13 +05:30
fsl-ls1028a.dtsi arm: dts: ls1028a: fix interrupt properties 2020-02-04 16:19:37 +05:30
fsl-ls1043a-qds-duart.dts SPDX: Convert all of our multiple license tags to Linux Kernel style 2018-05-07 10:24:31 -04:00
fsl-ls1043a-qds-lpuart.dts SPDX: Convert all of our multiple license tags to Linux Kernel style 2018-05-07 10:24:31 -04:00
fsl-ls1043a-qds.dtsi dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
fsl-ls1043a-rdb.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
fsl-ls1043a.dtsi ARM: dts: Freescale: Add ecc addr for sata node 2019-05-22 12:24:24 +05:30
fsl-ls1046a-frwy.dts dm: arm64: ls1046a: add i2c DM support 2020-03-30 08:12:13 +05:30
fsl-ls1046a-qds-duart.dts SPDX: Convert all of our multiple license tags to Linux Kernel style 2018-05-07 10:24:31 -04:00
fsl-ls1046a-qds-lpuart.dts SPDX: Convert all of our multiple license tags to Linux Kernel style 2018-05-07 10:24:31 -04:00
fsl-ls1046a-qds.dtsi dm: arm64: ls1046a: add i2c DM support 2020-03-30 08:12:13 +05:30
fsl-ls1046a-rdb.dts dm: arm64: ls1046a: add i2c DM support 2020-03-30 08:12:13 +05:30
fsl-ls1046a.dtsi ARM: dts: Freescale: Add ecc addr for sata node 2019-05-22 12:24:24 +05:30
fsl-ls1088a-qds.dts armv8: dts: ls1088aqds : Add pcf2127 node 2019-08-22 09:07:36 +05:30
fsl-ls1088a-rdb.dts armv8: dts: ls1088ardb: Add slave nodes under the i2c0 controller 2019-08-22 09:07:36 +05:30
fsl-ls1088a.dtsi armv8: dts: ls1088a: add PSCI binding for LS1088A 2019-11-08 11:13:38 +05:30
fsl-ls2080a-qds.dts armv8: dts: ls2088aqds : Add ds3232 node 2019-08-22 09:07:36 +05:30
fsl-ls2080a-rdb.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
fsl-ls2080a.dtsi armv8: dts: fsl-ls2088a: add i2c node support 2019-08-22 09:07:36 +05:30
fsl-ls2081a-rdb.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
fsl-ls2088a-rdb-qspi.dts armv8: dts: ls2088ardb: Add slave nodes under the i2c0 2019-08-22 09:07:36 +05:30
fsl-lx2160a-qds.dts arm: dts: lx2160a: Use flexspi in octal I/O mode 2020-03-30 08:12:13 +05:30
fsl-lx2160a-rdb.dts arm: dts: lx2160a: Use flexspi in octal I/O mode 2020-03-30 08:12:13 +05:30
fsl-lx2160a.dtsi arm: dts: lx2160a: Add FSPI node properties 2020-02-04 16:19:37 +05:30
hi3660-hikey960-u-boot.dtsi arm: dts: Add devicetree for Hikey960 board 2019-08-11 16:43:41 -04:00
hi3660-hikey960.dts arm: dts: Add devicetree for Hikey960 board 2019-08-11 16:43:41 -04:00
hi3660.dtsi arm: dts: Import HI3660 devicetree from Linux 2019-08-11 16:43:41 -04:00
hi3798cv200-poplar.dts arm64: dt: poplar: add optee node 2019-01-26 08:13:54 -05:00
hi3798cv200-u-boot.dtsi poplar: enable Ethernet driver support 2019-04-23 17:57:25 -04:00
hi3798cv200.dtsi poplar: sync up device tree with kernel 4.20 2019-01-25 12:12:56 -05:00
hi6220-hikey-u-boot.dtsi arm: dts: Add MMC nodes for HiKey board 2019-01-15 15:28:21 -05:00
hi6220-hikey.dts arm: dts: Add MMC nodes for HiKey board 2019-01-15 15:28:21 -05:00
hi6220.dtsi arm: dts: Add MMC nodes for HiKey board 2019-01-15 15:28:21 -05:00
hikey960-pinctrl.dtsi arm: dts: Import HI3660 devicetree from Linux 2019-08-11 16:43:41 -04:00
imx6-apalis.dts ARM: dts: imx6_apalis: introduce fec node 2020-01-07 10:26:56 +01:00
imx6-colibri.dts ARM: dts: imx6_colibri: introduce fec node 2020-01-07 10:26:56 +01:00
imx6-logicpd-baseboard.dtsi ARM: DTS: imx6q-logicpd: Resync with Linux 5.1 2019-06-05 12:14:02 -04:00
imx6-logicpd-som.dtsi ARM: DTS: imx6q-logicpd: Resync with Linux 5.1 2019-06-05 12:14:02 -04:00
imx6dl-aristainetos2_4-u-boot.dtsi imx6: aristainetos: prepare dts for other board versions 2020-01-07 10:26:55 +01:00
imx6dl-aristainetos2_4.dts imx6: aristainetos: prepare dts for other board versions 2020-01-07 10:26:55 +01:00
imx6dl-aristainetos2_4.dtsi imx6: aristainetos: prepare dts for other board versions 2020-01-07 10:26:55 +01:00
imx6dl-aristainetos2_7-u-boot.dtsi imx6: aristainetos: prepare dts for other board versions 2020-01-07 10:26:55 +01:00
imx6dl-aristainetos2_7.dts imx6: aristainetos: prepare dts for other board versions 2020-01-07 10:26:55 +01:00
imx6dl-aristainetos2_7.dtsi imx6: aristainetos: prepare dts for other board versions 2020-01-07 10:26:55 +01:00
imx6dl-aristainetos2b_4-u-boot.dtsi imx6: aristainetos: readd aristainetos 2b board 2020-01-07 10:26:56 +01:00
imx6dl-aristainetos2b_4.dts imx6: aristainetos: readd aristainetos 2b board 2020-01-07 10:26:56 +01:00
imx6dl-aristainetos2b_7-u-boot.dtsi imx6: aristainetos: readd aristainetos 2b board 2020-01-07 10:26:56 +01:00
imx6dl-aristainetos2b_7.dts imx6: aristainetos: readd aristainetos 2b board 2020-01-07 10:26:56 +01:00
imx6dl-aristainetos2b_csl_4-u-boot.dtsi imx6: aristainetos: add aristainetos 2b csl 2020-01-07 10:26:56 +01:00
imx6dl-aristainetos2b_csl_4.dts imx6: aristainetos: add aristainetos 2b csl 2020-01-07 10:26:56 +01:00
imx6dl-aristainetos2b_csl_7-u-boot.dtsi imx6: aristainetos: add aristainetos 2b csl 2020-01-07 10:26:56 +01:00
imx6dl-aristainetos2b_csl_7.dts imx6: aristainetos: add aristainetos 2b csl 2020-01-07 10:26:56 +01:00
imx6dl-aristainetos2c_4-u-boot.dtsi imx6: aristainetos: add support for rev C board 2020-01-07 10:26:56 +01:00
imx6dl-aristainetos2c_4.dts imx6: aristainetos: add support for rev C board 2020-01-07 10:26:56 +01:00
imx6dl-aristainetos2c_7-u-boot.dtsi imx6: aristainetos: add support for rev C board 2020-01-07 10:26:56 +01:00
imx6dl-aristainetos2c_7.dts imx6: aristainetos: add support for rev C board 2020-01-07 10:26:56 +01:00
imx6dl-brppt2.dts board/BuR/brppt2: initial commit 2019-11-03 21:17:55 +01:00
imx6dl-cubox-i-emmc-som-v15.dts arm: dts: hummingboard: add cubox/hummingboard DT (part 2 of 2) 2020-01-07 10:26:56 +01:00
imx6dl-cubox-i-som-v15.dts arm: dts: hummingboard: add cubox/hummingboard DT (part 2 of 2) 2020-01-07 10:26:56 +01:00
imx6dl-cubox-i.dts arm: dts: hummingboard: add cubox/hummingboard DT (part 1 of 2) 2020-01-07 10:26:56 +01:00
imx6dl-dhcom-pdk2.dts ARM: dts: imx: dh-imx6: Add DHCOM iMX6 Duallite PDK2 device tree 2019-07-19 20:32:24 +02:00
imx6dl-hummingboard-emmc-som-v15.dts arm: dts: hummingboard: add cubox/hummingboard DT (part 2 of 2) 2020-01-07 10:26:56 +01:00
imx6dl-hummingboard-som-v15.dts arm: dts: hummingboard: add cubox/hummingboard DT (part 2 of 2) 2020-01-07 10:26:56 +01:00
imx6dl-hummingboard.dts arm: dts: hummingboard: add cubox/hummingboard DT (part 1 of 2) 2020-01-07 10:26:56 +01:00
imx6dl-hummingboard2-emmc-som-v15-u-boot.dtsi arm: dts: hummingboard: add cubox/hummingboard DT (part 2 of 2) 2020-01-07 10:26:56 +01:00
imx6dl-hummingboard2-emmc-som-v15.dts arm: dts: hummingboard: add cubox/hummingboard DT (part 2 of 2) 2020-01-07 10:26:56 +01:00
imx6dl-hummingboard2-som-v15.dts arm: dts: hummingboard: add cubox/hummingboard DT (part 2 of 2) 2020-01-07 10:26:56 +01:00
imx6dl-hummingboard2.dts arm: dts: hummingboard: add cubox/hummingboard DT (part 2 of 2) 2020-01-07 10:26:56 +01:00
imx6dl-icore-mipi-u-boot.dtsi Fixup various SPDX tags from the latest merge 2018-05-18 17:56:50 -04:00
imx6dl-icore-mipi.dts ARM: dts: imx6q-icore-mipi: Use 1.5 version of i.Core MX6DL 2020-01-07 10:26:57 +01:00
imx6dl-icore-rqs-u-boot.dtsi Fixup various SPDX tags from the latest merge 2018-05-18 17:56:50 -04:00
imx6dl-icore-rqs.dts ARM: dts: icorem6: Sync engicam device trees from v5.4 2020-01-07 10:26:57 +01:00
imx6dl-icore-u-boot.dtsi Fixup various SPDX tags from the latest merge 2018-05-18 17:56:50 -04:00
imx6dl-icore.dts ARM: dts: icorem6: Sync engicam device trees from v5.4 2020-01-07 10:26:57 +01:00
imx6dl-mamoj-u-boot.dtsi Fixup various SPDX tags from the latest merge 2018-05-18 17:56:50 -04:00
imx6dl-mamoj.dts i.MX6DL: mamoj: Add PFUZE100 support 2018-05-18 08:23:43 +02:00
imx6dl-nitrogen6x.dts nitrogen6x: migrate to using device tree 2019-10-08 16:35:16 +02:00
imx6dl-pico.dts pico-imx6: Add initial support 2019-10-08 16:35:59 +02:00
imx6dl-pinfunc.h arm: dts: imx6dl: Add pinctrl defines 2016-10-26 16:53:16 +02:00
imx6dl-sabreauto-u-boot.dtsi arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files 2019-02-15 22:01:15 +01:00
imx6dl-sabreauto.dts arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd] 2019-02-15 22:01:15 +01:00
imx6dl-sabresd-u-boot.dtsi arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files 2019-02-15 22:01:15 +01:00
imx6dl-sabresd.dts arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd] 2019-02-15 22:01:15 +01:00
imx6dl-wandboard-revb1.dts wandboard: Sync with devicetree files from kernel 5.1.9 2019-07-04 14:19:48 +02:00
imx6dl.dtsi arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd] 2019-02-15 22:01:15 +01:00
imx6q-b450v3.dts board: ge: bx50v3: override panel 2020-02-09 21:47:20 +01:00
imx6q-b650v3.dts board: ge: bx50v3: override panel 2020-02-09 21:47:20 +01:00
imx6q-b850v3.dts board: ge: bx50v3: override panel 2020-02-09 21:47:20 +01:00
imx6q-ba16.dtsi board: ge: bx50v3: sync devicetrees from Linux 2020-01-07 10:26:56 +01:00
imx6q-bx50v3-uboot.dtsi board: ge: bx50v3: override panel 2020-02-09 21:47:20 +01:00
imx6q-bx50v3.dts board: ge: bx50v3: sync devicetrees from Linux 2020-01-07 10:26:56 +01:00
imx6q-bx50v3.dtsi board: ge: bx50v3, imx53ppd: add eeprom partitions 2020-02-09 21:47:20 +01:00
imx6q-cm-fx6.dts ARM: imx: cm-fx6: reinstate USB support by syncing the devicetree with Linux 2017-12-29 11:17:22 +01:00
imx6q-cubox-i-emmc-som-v15.dts arm: dts: hummingboard: add cubox/hummingboard DT (part 2 of 2) 2020-01-07 10:26:56 +01:00
imx6q-cubox-i-som-v15.dts arm: dts: hummingboard: add cubox/hummingboard DT (part 2 of 2) 2020-01-07 10:26:56 +01:00
imx6q-cubox-i.dts arm: dts: hummingboard: add cubox/hummingboard DT (part 1 of 2) 2020-01-07 10:26:56 +01:00
imx6q-dhcom-pdk2-u-boot.dtsi ARM: dts: dh-imx6: add u-boot specific wdt-reboot node 2020-01-07 10:26:56 +01:00
imx6q-dhcom-pdk2.dts ARM: dts: dh-imx6: Refactor DT with som and board level defs for use with imx6 duallite 2019-07-19 20:32:24 +02:00
imx6q-display5-u-boot.dtsi DM: WDT: Convert WDT driver to use DM/DTS (including SYSRESET) 2019-10-08 16:35:59 +02:00
imx6q-display5.dts DTS: imx: Add display5 board (imx6q based) device tree description (v5.1) 2019-07-19 20:14:50 +02:00
imx6q-hummingboard-emmc-som-v15.dts arm: dts: hummingboard: add cubox/hummingboard DT (part 2 of 2) 2020-01-07 10:26:56 +01:00
imx6q-hummingboard-som-v15.dts arm: dts: hummingboard: add cubox/hummingboard DT (part 2 of 2) 2020-01-07 10:26:56 +01:00
imx6q-hummingboard.dts arm: dts: hummingboard: add cubox/hummingboard DT (part 1 of 2) 2020-01-07 10:26:56 +01:00
imx6q-hummingboard2-emmc-som-v15-u-boot.dtsi arm: dts: hummingboard: add cubox/hummingboard DT (part 2 of 2) 2020-01-07 10:26:56 +01:00
imx6q-hummingboard2-emmc-som-v15.dts arm: dts: hummingboard: add cubox/hummingboard DT (part 2 of 2) 2020-01-07 10:26:56 +01:00
imx6q-hummingboard2-som-v15.dts arm: dts: hummingboard: add cubox/hummingboard DT (part 2 of 2) 2020-01-07 10:26:56 +01:00
imx6q-hummingboard2.dts arm: dts: hummingboard: add cubox/hummingboard DT (part 2 of 2) 2020-01-07 10:26:56 +01:00
imx6q-icore-mipi-u-boot.dtsi Fixup various SPDX tags from the latest merge 2018-05-18 17:56:50 -04:00
imx6q-icore-mipi.dts ARM: dts: icorem6: Sync engicam device trees from v5.4 2020-01-07 10:26:57 +01:00
imx6q-icore-ofcap10.dts ARM: dts: icorem6: Sync engicam device trees from v5.4 2020-01-07 10:26:57 +01:00
imx6q-icore-ofcap12.dts ARM: dts: icorem6: Sync engicam device trees from v5.4 2020-01-07 10:26:57 +01:00
imx6q-icore-rqs-u-boot.dtsi Fixup various SPDX tags from the latest merge 2018-05-18 17:56:50 -04:00
imx6q-icore-rqs.dts ARM: dts: icorem6: Sync engicam device trees from v5.4 2020-01-07 10:26:57 +01:00
imx6q-icore-u-boot.dtsi Fixup various SPDX tags from the latest merge 2018-05-18 17:56:50 -04:00
imx6q-icore.dts ARM: dts: icorem6: Sync engicam device trees from v5.4 2020-01-07 10:26:57 +01:00
imx6q-kp-u-boot.dtsi imx: dts: Add u-boot specific set of device tree properties for tpc70 2019-10-13 22:49:11 +02:00
imx6q-kp.dts imx: Enable RTC (ds1307) support in the U-Boot proper on TPC70 board 2019-11-03 17:04:16 +01:00
imx6q-logicpd-u-boot.dtsi ARM: imx6q_logic: Enable Pin muxing in SPL 2019-10-13 22:49:11 +02:00
imx6q-logicpd.dts ARM: DTS: imx6q-logicpd: Resync with Linux 5.1 2019-06-05 12:14:02 -04:00
imx6q-mccmon6.dts ARM: imx: Convert mccmon6 to use DM/DTS in the u-boot proper 2019-11-03 17:04:16 +01:00
imx6q-nitrogen6x.dts nitrogen6x: migrate to using device tree 2019-10-08 16:35:16 +02:00
imx6q-novena.dts ARM: imx: novena: Convert block devices to DM 2019-06-11 10:42:48 +02:00
imx6q-pico.dts pico-imx6: Add initial support 2019-10-08 16:35:59 +02:00
imx6q-pinfunc.h arm: dts: imx6q: Add pinctrl defines 2016-10-26 16:53:16 +02:00
imx6q-sabreauto-u-boot.dtsi arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files 2019-02-15 22:01:15 +01:00
imx6q-sabreauto.dts arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd] 2019-02-15 22:01:15 +01:00
imx6q-sabrelite.dts nitrogen6x: migrate to using device tree 2019-10-08 16:35:16 +02:00
imx6q-sabresd-u-boot.dtsi arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files 2019-02-15 22:01:15 +01:00
imx6q-sabresd.dts arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd] 2019-02-15 22:01:15 +01:00
imx6q-tbs2910.dts ARM: dts: imx6q-tbs2910: Sync devicetree with kernel 5.3 2019-10-13 22:49:11 +02:00
imx6q-wandboard-revb1.dts wandboard: Import extra wandboard devicetree files 2019-07-04 14:19:48 +02:00
imx6q.dtsi imx: mx6sabresd: fix boot hang with video 2019-05-20 11:58:01 +02:00
imx6qdl-aristainetos2-common.dtsi imx6: aristainetos: prepare dts for other board versions 2020-01-07 10:26:55 +01:00
imx6qdl-aristainetos2-u-boot.dtsi imx6: aristainetos: prepare dts for other board versions 2020-01-07 10:26:55 +01:00
imx6qdl-aristainetos2.dtsi imx6: aristainetos: prepare dts for other board versions 2020-01-07 10:26:55 +01:00
imx6qdl-aristainetos2b-u-boot.dtsi imx6: aristainetos: readd aristainetos 2b board 2020-01-07 10:26:56 +01:00
imx6qdl-aristainetos2b.dtsi imx6: aristainetos: readd aristainetos 2b board 2020-01-07 10:26:56 +01:00
imx6qdl-aristainetos2b_csl-u-boot.dtsi imx6: aristainetos: add aristainetos 2b csl 2020-01-07 10:26:56 +01:00
imx6qdl-aristainetos2b_csl.dtsi imx6: aristainetos: add aristainetos 2b csl 2020-01-07 10:26:56 +01:00
imx6qdl-aristainetos2c-u-boot.dtsi imx6: aristainetos: add support for rev C board 2020-01-07 10:26:56 +01:00
imx6qdl-aristainetos2c.dtsi imx6: aristainetos: add support for rev C board 2020-01-07 10:26:56 +01:00
imx6qdl-cubox-i.dtsi arm: dts: hummingboard: add cubox/hummingboard DT (part 1 of 2) 2020-01-07 10:26:56 +01:00
imx6qdl-dhcom-pdk2.dtsi ARM: dts: dh-imx6: Refactor DT with som and board level defs for use with imx6 duallite 2019-07-19 20:32:24 +02:00
imx6qdl-dhcom.dtsi ARM: dts: dh-imx6: Refactor DT with som and board level defs for use with imx6 duallite 2019-07-19 20:32:24 +02:00
imx6qdl-hummingboard.dtsi arm: dts: hummingboard: add cubox/hummingboard DT (part 1 of 2) 2020-01-07 10:26:56 +01:00
imx6qdl-hummingboard2-emmc-som-v15-u-boot.dtsi arm: dts: hummingboard: add cubox/hummingboard DT (part 2 of 2) 2020-01-07 10:26:56 +01:00
imx6qdl-hummingboard2-emmc.dtsi arm: dts: hummingboard: add cubox/hummingboard DT (part 2 of 2) 2020-01-07 10:26:56 +01:00
imx6qdl-hummingboard2.dtsi arm: dts: hummingboard: add cubox/hummingboard DT (part 2 of 2) 2020-01-07 10:26:56 +01:00
imx6qdl-icore-1.5.dtsi ARM: dts: imx6qdl-icore-1.5: Remove duplicate phy reset methods 2020-01-07 10:26:57 +01:00
imx6qdl-icore-rqs-u-boot.dtsi Fixup various SPDX tags from the latest merge 2018-05-18 17:56:50 -04:00
imx6qdl-icore-rqs.dtsi ARM: dts: icorem6: Sync engicam device trees from v5.4 2020-01-07 10:26:57 +01:00
imx6qdl-icore-u-boot.dtsi Fixup various SPDX tags from the latest merge 2018-05-18 17:56:50 -04:00
imx6qdl-icore.dtsi ARM: dts: icorem6: Sync engicam device trees from v5.4 2020-01-07 10:26:57 +01:00
imx6qdl-nitrogen6x.dtsi nitrogen6x: migrate to using device tree 2019-10-08 16:35:16 +02:00
imx6qdl-pico.dtsi pico-imx6: Add initial support 2019-10-08 16:35:59 +02:00
imx6qdl-sabreauto-u-boot.dtsi arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files 2019-02-15 22:01:15 +01:00
imx6qdl-sabreauto.dtsi arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd] 2019-02-15 22:01:15 +01:00
imx6qdl-sabrelite.dtsi nitrogen6x: migrate to using device tree 2019-10-08 16:35:16 +02:00
imx6qdl-sabresd-u-boot.dtsi arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files 2019-02-15 22:01:15 +01:00
imx6qdl-sabresd.dtsi arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd] 2019-02-15 22:01:15 +01:00
imx6qdl-sr-som-brcm.dtsi arm: dts: hummingboard: add cubox/hummingboard DT (part 1 of 2) 2020-01-07 10:26:56 +01:00
imx6qdl-sr-som-emmc.dtsi arm: dts: hummingboard: add cubox/hummingboard DT (part 2 of 2) 2020-01-07 10:26:56 +01:00
imx6qdl-sr-som-ti.dtsi arm: dts: hummingboard: add cubox/hummingboard DT (part 2 of 2) 2020-01-07 10:26:56 +01:00
imx6qdl-sr-som.dtsi arm: dts: hummingboard: add cubox/hummingboard DT (part 1 of 2) 2020-01-07 10:26:56 +01:00
imx6qdl-u-boot.dtsi imx: imx6qdl: dtsi: move U-Boot specific change to u-boot.dtsi 2019-10-08 16:35:58 +02:00
imx6qdl-wandboard-revb1.dtsi wandboard: Sync with devicetree files from kernel 5.1.9 2019-07-04 14:19:48 +02:00
imx6qdl-wandboard-revd1.dtsi wandboard: Import extra wandboard devicetree files 2019-07-04 14:19:48 +02:00
imx6qdl-wandboard.dtsi imx: wandboard: convert FEC support to DM_ETH 2019-10-08 16:36:36 +02:00
imx6qdl.dtsi imx: imx6qdl: dtsi: move U-Boot specific change to u-boot.dtsi 2019-10-08 16:35:58 +02:00
imx6qp-sabreauto-u-boot.dtsi arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files 2019-02-15 22:01:15 +01:00
imx6qp-sabreauto.dts arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd] 2019-02-15 22:01:15 +01:00
imx6qp-sabresd-u-boot.dtsi arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files 2019-02-15 22:01:15 +01:00
imx6qp-sabresd.dts arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd] 2019-02-15 22:01:15 +01:00
imx6qp-wandboard-revd1.dts wandboard: Import extra wandboard devicetree files 2019-07-04 14:19:48 +02:00
imx6qp.dtsi arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd] 2019-02-15 22:01:15 +01:00
imx6sl-evk.dts imx: mx6slevk: introduce device tree support 2017-03-20 19:00:43 +01:00
imx6sl-pinfunc.h imx: mx6slevk: introduce device tree support 2017-03-20 19:00:43 +01:00
imx6sl.dtsi imx: mx6slevk: introduce device tree support 2017-03-20 19:00:43 +01:00
imx6sll-evk.dts arm: imx: add i.MX6SLL EVK board support 2016-12-16 11:38:24 +01:00
imx6sll-pinfunc.h arm: dts: add i.MX6SLL device tree 2016-12-16 11:38:24 +01:00
imx6sll.dtsi arm: dts: add i.MX6SLL device tree 2016-12-16 11:38:24 +01:00
imx6sx-pinfunc.h ARM: dts: imx6sx: Sync with kernel 5.4.16 2020-03-09 15:04:42 +01:00
imx6sx-sabreauto-u-boot.dtsi dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
imx6sx-sabreauto.dts imx: imx6sx-sabreauto: convert to use DM QSPI driver 2018-09-04 08:47:23 +02:00
imx6sx-sdb.dts ARM: dts: imx6sx-sdb: Sync with kernel 5.4.16 2020-03-09 15:04:51 +01:00
imx6sx-sdb.dtsi ARM: dts: imx6sx-sdb: Sync with kernel 5.4.16 2020-03-09 15:04:51 +01:00
imx6sx-softing-vining-2000.dts ARM: imx: vining2000: Repair PCIe support 2019-12-06 13:57:42 +01:00
imx6sx.dtsi ARM: dts: imx6sx: Sync with kernel 5.4.16 2020-03-09 15:04:42 +01:00
imx6ul-9x9-evk-u-boot.dtsi dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
imx6ul-9x9-evk.dts dts: imx6ul_evk: Add DTS files for 14x14 EVK and 9x9 EVK boards 2018-09-04 08:47:23 +02:00
imx6ul-14x14-evk-u-boot.dtsi imx: mx6ul_14x14_evk: configure for 24bpp display 2020-03-09 15:05:03 +01:00
imx6ul-14x14-evk.dts arm: dts: sync dts for i.MX6UL 2019-10-08 16:33:45 +02:00
imx6ul-14x14-evk.dtsi ARM: dts: imx6ul-14x14-evk: Pass the "broken-cd" property 2020-01-14 22:48:10 +01:00
imx6ul-geam-u-boot.dtsi imx6ul: geam: Fix fdt_file mismatch 2018-06-27 09:51:49 +02:00
imx6ul-geam.dts imx6ul: geam: Fix fdt_file mismatch 2018-06-27 09:51:49 +02:00
imx6ul-isiot-emmc-u-boot.dtsi Fixup various SPDX tags from the latest merge 2018-05-18 17:56:50 -04:00
imx6ul-isiot-emmc.dts ARM: dts: i.MX6UL: U-Boot specific dts for u-boot, dm-spl 2018-05-18 08:23:43 +02:00
imx6ul-isiot-nand.dts ARM: dts: i.MX6UL: U-Boot specific dts for u-boot, dm-spl 2018-05-18 08:23:43 +02:00
imx6ul-isiot-u-boot.dtsi Fixup various SPDX tags from the latest merge 2018-05-18 17:56:50 -04:00
imx6ul-isiot.dtsi ARM: dts: i.MX6UL: U-Boot specific dts for u-boot, dm-spl 2018-05-18 08:23:43 +02:00
imx6ul-liteboard.dts ARM: dts: imx6ul-lite*: add DTS files for liteSOM and liteboard 2019-02-15 12:45:15 +01:00
imx6ul-litesom.dtsi ARM: dts: imx6ul-lite*: add DTS files for liteSOM and liteboard 2019-02-15 12:45:15 +01:00
imx6ul-opos6ul-u-boot.dtsi ARM: opos6ul: make the board boot again 2018-10-09 18:36:03 +02:00
imx6ul-opos6ul.dtsi ARM: opos6ul: make the board boot again 2018-10-09 18:36:03 +02:00
imx6ul-opos6uldev-u-boot.dtsi opos6uldev: migrate to DM_VIDEO 2019-11-03 17:04:16 +01:00
imx6ul-opos6uldev.dts opos6uldev: migrate to DM_VIDEO 2019-11-03 17:04:16 +01:00
imx6ul-phytec-phycore-som.dtsi imx: sync with kernel device tree for Phycore SoM 2020-01-07 10:26:56 +01:00
imx6ul-phytec-segin-ff-rdk-nand.dts imx: sync with kernel device tree for Phycore SoM 2020-01-07 10:26:56 +01:00
imx6ul-phytec-segin-peb-eval-01.dtsi imx: sync with kernel device tree for Phycore SoM 2020-01-07 10:26:56 +01:00
imx6ul-phytec-segin.dtsi imx: sync with kernel device tree for Phycore SoM 2020-01-07 10:26:56 +01:00
imx6ul-pico-hobbit.dts pico-imx6ul: Import dts files from kernel 2019-03-13 09:14:35 +01:00
imx6ul-pico-pi.dts pico-imx6ul: Import dts files from kernel 2019-03-13 09:14:35 +01:00
imx6ul-pico.dtsi pico-imx6ul: Import dts files from kernel 2019-03-13 09:14:35 +01:00
imx6ul-pinfunc.h arm: dts: sync dts for i.MX6UL 2019-10-08 16:33:45 +02:00
imx6ul-u-boot.dtsi Fixup various SPDX tags from the latest merge 2018-05-18 17:56:50 -04:00
imx6ul.dtsi arm: dts: sync dts for i.MX6UL 2019-10-08 16:33:45 +02:00
imx6ull-14x14-evk.dts arm: dts: sync dts for i.MX6ULL 2019-10-08 16:33:45 +02:00
imx6ull-colibri-u-boot.dtsi ARM: dts: imx6ull-colibri: pre-reloc for uart pinmux modes 2019-11-03 17:04:16 +01:00
imx6ull-colibri.dts ARM: dts: imx6ull-colibri: change hierarchy of DTS files 2019-11-03 17:04:16 +01:00
imx6ull-colibri.dtsi ARM: dts: imx6ull-colibri: change hierarchy of DTS files 2019-11-03 17:04:16 +01:00
imx6ull-dart-6ul.dts imx: Add variscite DART-6UL Evaluation Kit 2019-04-25 19:16:24 +02:00
imx6ull-dart-6ul.dtsi imx: Add variscite DART-6UL Evaluation Kit 2019-04-25 19:16:24 +02:00
imx6ull-phytec-phycore-som.dtsi imx: sync with kernel device tree for Phycore SoM 2020-01-07 10:26:56 +01:00
imx6ull-phytec-segin-ff-rdk-emmc.dts imx: sync with kernel device tree for Phycore SoM 2020-01-07 10:26:56 +01:00
imx6ull-phytec-segin-peb-eval-01.dtsi imx: sync with kernel device tree for Phycore SoM 2020-01-07 10:26:56 +01:00
imx6ull-phytec-segin.dtsi imx: sync with kernel device tree for Phycore SoM 2020-01-07 10:26:56 +01:00
imx6ull-pinfunc-snvs.h arm: dts: sync dts for i.MX6ULL 2019-10-08 16:33:45 +02:00
imx6ull-pinfunc.h arm: dts: sync dts for i.MX6ULL 2019-10-08 16:33:45 +02:00
imx6ull-somlabs-visionsom.dts ARM: imx: mx6ull: Add iMX6ULL VisionSOM SoM and EVK 2020-01-20 15:38:16 +01:00
imx6ull-u-boot.dtsi ARM: dts: i.MX6ULL: U-Boot specific dts for u-boot, dm-spl 2019-06-11 10:42:48 +02:00
imx6ull.dtsi arm: dts: sync dts for i.MX6ULL 2019-10-08 16:33:45 +02:00
imx6ulz-14x14-evk.dts imx: add i.MX6ULZ board 2019-10-08 16:33:45 +02:00
imx6ulz.dtsi arm: dts: import dts for i.MX6ULZ 2019-10-08 16:33:45 +02:00
imx7-colibri-emmc.dts u-boot-imx-20190612 2019-06-11 13:41:24 -04:00
imx7-colibri-rawnand.dts colibri_imx7: migrate usb to driver model 2019-06-11 10:42:48 +02:00
imx7-colibri.dtsi ARM: dts: imx7: imx7_colibri: introduce fec node 2020-01-07 10:26:56 +01:00
imx7d-meerkat96.dts ARM: dts: import meerkat96 board support 2019-10-13 22:49:11 +02:00
imx7d-pico-hobbit.dts Arm: imx7d-pico: Import all Linux device tree for Pico i.MX7D SOM 2019-04-25 19:16:24 +02:00
imx7d-pico-pi.dts Arm: imx7d-pico: Import all Linux device tree for Pico i.MX7D SOM 2019-04-25 19:16:24 +02:00
imx7d-pico-u-boot.dtsi pico-imx7d: Remove dead code for dm_video 2019-10-08 16:36:37 +02:00
imx7d-pico.dtsi ARM: dts: pico-imx7d: sync device tree with v5.3-rc6 2019-10-08 16:35:59 +02:00
imx7d-pinfunc.h arm: dts: imx7: Correct spelling mistake in GPIO name 2019-01-28 20:55:46 +01:00
imx7d-sdb-qspi-u-boot.dtsi dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
imx7d-sdb-qspi.dts imx: imx7d-sdb: Add DM QSPI support 2018-09-04 08:47:23 +02:00
imx7d-sdb-u-boot.dtsi mx7dsabre: Fix usbtog probe when use dfu or ums 2020-02-09 14:59:54 +01:00
imx7d-sdb.dts mx7dsabre: Enable DM_ETH 2020-01-07 10:26:56 +01:00
imx7d.dtsi ARM: dts: imx7: imx7_colibri: introduce fec node 2020-01-07 10:26:56 +01:00
imx7s-warp-u-boot.dtsi arm: dts: imx7s-warp7: Move u-boot specific node in u-boot.dtsi 2020-02-09 14:59:54 +01:00
imx7s-warp.dts arm: dts: imx7s-warp7: Move u-boot specific node in u-boot.dtsi 2020-02-09 14:59:54 +01:00
imx7s.dtsi ARM: dts: imx7: imx7_colibri: introduce fec node 2020-01-07 10:26:56 +01:00
imx7ulp-com.dts mx7ulp: Add support for Embedded Artists COM board 2020-01-07 10:26:56 +01:00
imx7ulp-evk.dts arm: dts: imx7ulp-evk: remove mux value from pad configuration 2020-01-20 15:38:16 +01:00
imx7ulp-pinfunc.h mx7ulp: Sync the device tree related files 2019-12-06 12:05:08 +01:00
imx7ulp-uboot.dtsi imx: imx7ulp: add EVK board support 2017-03-17 09:27:08 +01:00
imx7ulp.dtsi mx7ulp: Sync the device tree related files 2019-12-06 12:05:08 +01:00
imx8-deneb.dts imx: add imx8x based deneb board 2020-01-14 22:15:21 +01:00
imx8-giedi.dts imx: add imx8x capricorn giedi board 2020-01-14 22:15:21 +01:00
imx8mm-evk-u-boot.dtsi imx: imx8mm-evk: enable ethernet 2019-11-05 10:27:18 +01:00
imx8mm-evk.dts imx: add i.MX8MN DDR4 board support 2019-11-05 10:27:18 +01:00
imx8mm-pinfunc.h arm: dts: imx8mm-pinfunc: sync latest linux-next pin func header 2020-02-09 14:50:52 +01:00
imx8mm-verdin-u-boot.dtsi ARM: dts: imx8mm-verdin: dm-spl for pinctrl_usdhc1 node 2020-03-09 15:06:40 +01:00
imx8mm-verdin.dts ARM: dts: imx8mm-verdin: drop rgmii_rxc_dly/txc_dly 2020-03-09 15:06:47 +01:00
imx8mm.dtsi arm: dts: imx8mm: sync dts from Linux Kernel 2019-11-03 21:18:00 +01:00
imx8mn-ddr4-evk-u-boot.dtsi imx: add i.MX8MN DDR4 board support 2019-11-05 10:27:18 +01:00
imx8mn-ddr4-evk.dts imx: add i.MX8MN DDR4 board support 2019-11-05 10:27:18 +01:00
imx8mn-pinfunc.h imx: add dtsi for i.MX8MN 2019-11-05 10:27:18 +01:00
imx8mn.dtsi imx: add dtsi for i.MX8MN 2019-11-05 10:27:18 +01:00
imx8mp-evk-u-boot.dtsi imx: add i.MX8MP EVK board 2020-01-08 13:20:09 +01:00
imx8mp-evk.dts imx: add i.MX8MP EVK board 2020-01-08 13:20:09 +01:00
imx8mp-pinfunc.h arm: dts: add i.MX8MP pinfunc header 2020-01-08 13:20:08 +01:00
imx8mp.dtsi arm: dts: freescale: Add i.MX8MP dtsi support 2020-01-08 13:20:08 +01:00
imx8mq-evk.dts arm: dts: imx8mq-evk: add phy-reset-gpios for fec1 2020-03-10 10:59:08 +01:00
imx8mq.dtsi imx: update i.MX8MQ device trees 2019-11-03 17:04:16 +01:00
imx8qm-rom7720-a1.dts imx: support i.MX8QM ROM 7720 a1 board 2019-11-03 21:18:00 +01:00
imx8qxp-capricorn-u-boot.dtsi imx: add imx8x capricorn giedi board 2020-01-14 22:15:21 +01:00
imx8qxp-capricorn.dtsi imx: add imx8x capricorn giedi board 2020-01-14 22:15:21 +01:00
imx28-pinfunc.h ARM: dts: imx: Copy imx28 device tree related files from Linux kernel (v5.1.11) 2019-07-19 14:57:14 +02:00
imx28-u-boot.dtsi dts: imx28: Remove #include "imx28.dtsi" from imx28-u-boot.dtsi file 2019-10-08 16:36:36 +02:00
imx28-xea-u-boot.dtsi imx: Add support for i.MX28 based XEA board 2020-01-07 10:26:56 +01:00
imx28-xea.dts arm: xea: dts: Add 'fec-3v3' regulator properties to prevent accidental disablement 2020-02-09 14:59:16 +01:00
imx28.dtsi ARM: dts: imx: Copy imx28 device tree related files from Linux kernel (v5.1.11) 2019-07-19 14:57:14 +02:00
imx53-cx9020.dts imx: cx9020: migrate cx9020 to CONFIG_DM_USB 2020-01-07 10:26:56 +01:00
imx53-kp-u-boot.dtsi DTS: imx53: Add imx53-kp-u-boot.dtsi file with u-boot specific property 2019-04-11 15:21:33 +02:00
imx53-kp.dts DTS: Enable USB host support (including regulators) on HSC|DDC boards 2019-04-25 17:03:25 +02:00
imx53-m53.dtsi ARM: dts: imx: m53menlo: Import M53Menlo DT from Linux 2019-06-27 14:14:23 +02:00
imx53-m53menlo-u-boot.dtsi ARM: imx: m53menlo: Convert WDT support to DM 2019-07-19 20:14:50 +02:00
imx53-m53menlo.dts ARM: dts: imx: m53menlo: Import M53Menlo DT from Linux 2019-06-27 14:14:23 +02:00
imx53-pinfunc.h dts: pinctrl: Provide IMX_PAD_SION definition for imx53 pinctrl 2018-05-17 12:13:00 +02:00
imx53-ppd-uboot.dtsi board: ge: mx53ppd: enable DM_VIDEO 2020-02-09 21:47:20 +01:00
imx53-ppd.dts board: ge: bx50v3, imx53ppd: use DM I2C 2020-02-09 21:47:20 +01:00
imx53.dtsi ARM: dts: imx: imx53: Synchronize iMX53 DT with Linux 2019-06-27 14:14:12 +02:00
imxrt1050-evk-u-boot.dtsi imx: imxrt1050-evk: Add support for the NXP i.MXRT1050-EVK 2020-01-14 22:54:00 +01:00
imxrt1050-evk.dts imx: imxrt1050-evk: Add support for the NXP i.MXRT1050-EVK 2020-01-14 22:54:00 +01:00
imxrt1050.dtsi ARM: dts: imxrt1050: add dtsi file 2020-01-14 22:53:59 +01:00
k3-am65-main.dtsi mmc: am654_sdhci: Update output tap delay writes 2020-03-09 08:33:16 +08:00
k3-am65-mcu.dtsi arm: dts: k3-am65-mcu: Add MCU domain R5F DT nodes 2019-10-11 10:07:35 -04:00
k3-am65-wakeup.dtsi arm: dts: k3-am654: Update power-domains property for each node 2019-07-26 21:49:23 -04:00
k3-am65.dtsi arm: dts: k3-am65: Add R5F ranges in interconnect nodes 2019-10-25 17:33:21 -04:00
k3-am654-base-board-ddr4-1600MTs.dtsi ram: k3-am654: Do not rely on default values for certain DDR register 2019-10-25 17:33:21 -04:00
k3-am654-base-board-u-boot.dtsi mmc: am654_sdhci: Update output tap delay writes 2020-03-09 08:33:16 +08:00
k3-am654-base-board.dts arm: dts: k3-am654-base-board: enable USB1 2020-01-20 10:10:29 +05:30
k3-am654-ddr.dtsi ram: k3-am654: Do not rely on default values for certain DDR register 2019-10-25 17:33:21 -04:00
k3-am654-r5-base-board.dts arm: dts: k3-am654-r5-base-board: Fix power-domains for wkup_vtm0 2020-01-20 10:10:28 +05:30
k3-am654.dtsi arm64: dts: k3: Add Support for AM654 SoC 2018-09-11 08:32:55 -04:00
k3-j721e-common-proc-board-u-boot.dtsi arm: dts: k3-j721e-common-proc-board: Enable I2C expander for SPL 2020-02-04 09:07:24 +05:30
k3-j721e-common-proc-board.dts arm: dts: k3-j721e-common-proc-board: Add I2C GPIO expander 2020-02-04 09:07:24 +05:30
k3-j721e-ddr-evm-lp4-3733.dtsi arm: dts: k3-j721e: ddr: Update to 0.2 version of DDR config tool 2020-01-03 09:47:10 -05:00
k3-j721e-ddr.dtsi arm: dts: k3-j721e: Add ddr node 2019-10-25 17:33:21 -04:00
k3-j721e-main.dtsi mmc: am654_sdhci: Update output tap delay writes 2020-03-09 08:33:16 +08:00
k3-j721e-mcu-wakeup.dtsi arm: dts: k3-j721e: Add I2C nodes 2020-02-04 09:07:24 +05:30
k3-j721e-r5-common-proc-board.dts arm: dts: k3-j721e-r5-common-proc-board: Use unique names for dummy clocks 2020-03-09 08:33:16 +08:00
k3-j721e-som-p0.dtsi arm: dts: k3-j721e-som-p0: Add HyperFlash node 2019-10-24 09:49:22 +02:00
k3-j721e.dtsi arm: dts: k3-j721e: Add I2C nodes 2020-02-04 09:07:24 +05:30
keystone-clocks.dtsi ARM: dts: Keystone2: Import generic dt files from Linux Kernel 2015-10-22 14:19:50 -04:00
keystone-k2e-clocks.dtsi ARM: dts: k2*: Rename the k2* files to keystone-k2* files 2017-02-08 15:56:30 -05:00
keystone-k2e-evm-u-boot.dtsi ARM: DTS: keystone: complete the description of the USB PHY devices 2019-10-24 11:28:17 +02:00
keystone-k2e-evm.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
keystone-k2e-netcp.dtsi ARM: dts: k2*: Rename the k2* files to keystone-k2* files 2017-02-08 15:56:30 -05:00
keystone-k2e.dtsi ARM: dts: k2*: Rename the k2* files to keystone-k2* files 2017-02-08 15:56:30 -05:00
keystone-k2g-evm-u-boot.dtsi ARM: DTS: keystone: complete the description of the USB PHY devices 2019-10-24 11:28:17 +02:00
keystone-k2g-evm.dts Merge branch 'master' of git://git.denx.de/u-boot-spi 2019-04-14 00:03:06 -04:00
keystone-k2g-generic-u-boot.dtsi SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
keystone-k2g-generic.dts SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
keystone-k2g-ice-u-boot.dtsi SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
keystone-k2g-ice.dts Merge branch 'master' of git://git.denx.de/u-boot-spi 2019-04-14 00:03:06 -04:00
keystone-k2g-netcp.dtsi ARM: dts: k2g: Disable netcp by default 2017-07-10 14:26:00 -04:00
keystone-k2g.dtsi ARM: dts: k2g-evm: enable USB0 and USB1 2018-12-14 17:59:09 +01:00
keystone-k2hk-clocks.dtsi ARM: dts: k2*: Rename the k2* files to keystone-k2* files 2017-02-08 15:56:30 -05:00
keystone-k2hk-evm-u-boot.dtsi ARM: DTS: keystone: complete the description of the USB PHY devices 2019-10-24 11:28:17 +02:00
keystone-k2hk-evm.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
keystone-k2hk-netcp.dtsi ARM: dts: k2*: Rename the k2* files to keystone-k2* files 2017-02-08 15:56:30 -05:00
keystone-k2hk.dtsi ARM: dts: k2*: Rename the k2* files to keystone-k2* files 2017-02-08 15:56:30 -05:00
keystone-k2l-clocks.dtsi ARM: dts: k2*: Rename the k2* files to keystone-k2* files 2017-02-08 15:56:30 -05:00
keystone-k2l-evm-u-boot.dtsi ARM: DTS: keystone: complete the description of the USB PHY devices 2019-10-24 11:28:17 +02:00
keystone-k2l-evm.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
keystone-k2l-netcp.dtsi ARM: dts: k2*: Rename the k2* files to keystone-k2* files 2017-02-08 15:56:30 -05:00
keystone-k2l.dtsi ARM: dts: k2*: Rename the k2* files to keystone-k2* files 2017-02-08 15:56:30 -05:00
keystone.dtsi ARM: dts: keystone2: add I2C aliases for davinci I2C nodes 2017-05-09 09:04:55 +02:00
kirkwood-98dx4122.dtsi ARM: add devicetree files for kirkwood SoC 2018-05-17 17:35:25 +02:00
kirkwood-6192.dtsi ARM: add devicetree files for kirkwood SoC 2018-05-17 17:35:25 +02:00
kirkwood-6281.dtsi ARM: add devicetree files for kirkwood SoC 2018-05-17 17:35:25 +02:00
kirkwood-atl-sbx81lifkw.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
kirkwood-atl-sbx81lifxcat.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
kirkwood-blackarmor-nas220.dts ARM: kirkwood: Add device-tree for nas220 2018-05-17 17:35:25 +02:00
kirkwood-d2net.dts ARM: kirkwood: Add device-tree for d2net_v2 & net2big_v2 2018-05-29 08:33:03 +02:00
kirkwood-db-88f6281-spi.dts ARM: kirkwood: add db-88f6281-bp board 2019-04-26 07:35:38 +02:00
kirkwood-db-88f6281.dts ARM: kirkwood: add db-88f6281-bp board 2019-04-26 07:35:38 +02:00
kirkwood-db.dtsi ARM: kirkwood: add db-88f6281-bp board 2019-04-26 07:35:38 +02:00
kirkwood-dns325.dts ARM: kirkwood: Add device-tree for dns325 2018-05-17 17:35:25 +02:00
kirkwood-dnskw.dtsi ARM: kirkwood: Add device-tree for dns325 2018-05-17 17:35:25 +02:00
kirkwood-dockstar.dts ARM: kirkwood: Add device-tree for dockstar 2018-05-17 17:35:25 +02:00
kirkwood-dreamplug.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
kirkwood-ds109.dts ARM: kirkwood: Add device-tree for ds109 2018-05-29 08:33:03 +02:00
kirkwood-goflexnet.dts ARM: kirkwood: Add device-tree for goflexhome 2018-05-17 17:35:25 +02:00
kirkwood-guruplug-server-plus.dts ARM: kirkwood: Add device-tree for guruplug 2018-05-17 17:35:25 +02:00
kirkwood-ib62x0.dts ARM: kirkwood: Add device-tree for ib62x0 2018-05-17 17:35:25 +02:00
kirkwood-iconnect.dts ARM: kirkwood: Add device-tree for iconnect 2018-05-17 17:35:25 +02:00
kirkwood-is2.dts ARM: kirkwood: Add device-tree for netspace & inetspace 2018-05-29 08:33:03 +02:00
kirkwood-km_common.dtsi km/uart: port UART interface of KM Kirkwood boards to driver model 2019-08-12 09:12:38 +02:00
kirkwood-km_kirkwood.dts km/spi: add SPI configuration to KM Kirkwood device tree 2019-07-11 10:58:03 +02:00
kirkwood-lschlv2.dts ARM: kirkwood: Add device-tree for lschlv2 & lsxhl 2018-05-29 08:33:03 +02:00
kirkwood-lsxhl.dts ARM: kirkwood: Add device-tree for lschlv2 & lsxhl 2018-05-29 08:33:03 +02:00
kirkwood-lsxl.dtsi dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
kirkwood-net2big.dts ARM: kirkwood: Add device-tree for d2net_v2 & net2big_v2 2018-05-29 08:33:03 +02:00
kirkwood-netxbig.dtsi dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
kirkwood-ns2-common.dtsi dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
kirkwood-ns2.dts ARM: kirkwood: Add device-tree for netspace & inetspace 2018-05-29 08:33:03 +02:00
kirkwood-ns2lite.dts ARM: kirkwood: Add device-tree for netspace & inetspace 2018-05-29 08:33:03 +02:00
kirkwood-ns2max.dts ARM: kirkwood: Add device-tree for netspace & inetspace 2018-05-29 08:33:03 +02:00
kirkwood-ns2mini.dts ARM: kirkwood: Add device-tree for netspace & inetspace 2018-05-29 08:33:03 +02:00
kirkwood-openrd-base.dts ARM: kirkwood: Add device-tree for openrd 2018-05-17 17:35:25 +02:00
kirkwood-openrd-client.dts ARM: kirkwood: Add device-tree for openrd 2018-05-17 17:35:25 +02:00
kirkwood-openrd-ultimate.dts ARM: kirkwood: Add device-tree for openrd 2018-05-17 17:35:25 +02:00
kirkwood-openrd.dtsi ARM: kirkwood: Add device-tree for openrd 2018-05-17 17:35:25 +02:00
kirkwood-pogo_e02.dts ARM: kirkwood: Add device-tree for pogo_e02 2018-05-17 17:35:26 +02:00
kirkwood-sheevaplug-common.dtsi ARM: kirkwood: Add device-tree for sheevaplug 2018-05-17 17:35:26 +02:00
kirkwood-sheevaplug.dts ARM: kirkwood: Add device-tree for sheevaplug 2018-05-17 17:35:26 +02:00
kirkwood-synology.dtsi dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
kirkwood.dtsi ARM: add devicetree files for kirkwood SoC 2018-05-17 17:35:25 +02:00
logicpd-som-lv-35xx-devkit-u-boot.dtsi ARM: dts: omap3/omap35 Torpedo and SOM-LV: Unify and shrink SPL dtb 2020-01-20 10:10:28 +05:30
logicpd-som-lv-35xx-devkit.dts ARM: dts: Logic PD SOM-LV and Torpedo Boards: Resync DTS 2019-07-27 13:36:53 -04:00
logicpd-som-lv-37xx-devkit-u-boot.dtsi ARM: dts: omap3/omap35 Torpedo and SOM-LV: Unify and shrink SPL dtb 2020-01-20 10:10:28 +05:30
logicpd-som-lv-37xx-devkit.dts ARM: dts: Logic PD SOM-LV and Torpedo Boards: Resync DTS 2019-07-27 13:36:53 -04:00
logicpd-som-lv-baseboard.dtsi ARM: dts: Logic PD SOM-LV and Torpedo Boards: Resync DTS 2019-07-27 13:36:53 -04:00
logicpd-som-lv.dtsi ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux 2019-08-26 11:46:20 -04:00
logicpd-torpedo-35xx-devkit-u-boot.dtsi ARM: dts: omap3/omap35 Torpedo and SOM-LV: Unify and shrink SPL dtb 2020-01-20 10:10:28 +05:30
logicpd-torpedo-35xx-devkit.dts ARM: dts: Logic PD SOM-LV and Torpedo Boards: Resync DTS 2019-07-27 13:36:53 -04:00
logicpd-torpedo-37xx-devkit-u-boot.dtsi ARM: dts: omap3/omap35 Torpedo and SOM-LV: Unify and shrink SPL dtb 2020-01-20 10:10:28 +05:30
logicpd-torpedo-37xx-devkit.dts ARM: dts: Logic PD SOM-LV and Torpedo Boards: Resync DTS 2019-07-27 13:36:53 -04:00
logicpd-torpedo-baseboard.dtsi ARM: dts: Logic PD SOM-LV and Torpedo Boards: Resync DTS 2019-07-27 13:36:53 -04:00
logicpd-torpedo-som.dtsi ARM: dts: Logic PD SOM-LV and Torpedo Boards: Resync DTS 2019-07-27 13:36:53 -04:00
ls1021a-iot-duart.dts SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
ls1021a-iot.dtsi dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
ls1021a-qds-duart.dts SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
ls1021a-qds-lpuart.dts SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
ls1021a-qds.dtsi dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
ls1021a-tsn.dts Add support for the NXP LS1021A-TSN board 2019-07-25 13:13:31 -05:00
ls1021a-twr-duart.dts SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
ls1021a-twr-lpuart.dts SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
ls1021a-twr.dtsi arm: ls1021atwr: Convert to use driver model TSEC driver 2019-07-25 13:13:31 -05:00
ls1021a.dtsi arm: ls1021atwr: Convert to use driver model TSEC driver 2019-07-25 13:13:31 -05:00
Makefile ARM: tegra: Add NVIDIA Jetson Nano Developer Kit support 2020-04-02 14:30:02 -07:00
meson-axg-s400-u-boot.dtsi arm: dts: s400: Fix status for eMMC and SDIO ports 2018-12-19 16:20:50 +01:00
meson-axg-s400.dts ARM: dts: Sync Amlogic Meson AXG DT from Linux 4.20-rc1 2018-11-26 14:40:52 +01:00
meson-axg.dtsi ARM: dts: Sync Amlogic Meson AXG DT from Linux 4.20-rc1 2018-11-26 14:40:52 +01:00
meson-g12-common-u-boot.dtsi ARM: dts: meson-sm1: add U-Boot specific DT for graphics 2019-10-18 14:40:32 +02:00
meson-g12-common.dtsi arm: dts: Import and update DT for Khadas VIM3 2019-10-18 11:57:00 +02:00
meson-g12a-sei510-u-boot.dtsi ARM: dts: meson-sm1: add U-Boot specific DT for graphics 2019-10-18 14:40:32 +02:00
meson-g12a-sei510.dts ARM: dts: Import Amlogic G12A SEI510 DT from Linux 5.3-rc1 2019-08-12 10:02:30 +02:00
meson-g12a-u200-u-boot.dtsi ARM: dts: meson-sm1: add U-Boot specific DT for graphics 2019-10-18 14:40:32 +02:00
meson-g12a-u200.dts ARM: dts: Sync Amlogic G12A with Linux 5.3-rc1 2019-07-31 12:10:42 +02:00
meson-g12a.dtsi arm: dts: Import and update DT for Khadas VIM3 2019-10-18 11:57:00 +02:00
meson-g12b-a311d-khadas-vim3.dts arm: dts: Import and update DT for Khadas VIM3 2019-10-18 11:57:00 +02:00
meson-g12b-a311d.dtsi arm: dts: Import and update DT for Khadas VIM3 2019-10-18 11:57:00 +02:00
meson-g12b-khadas-vim3.dtsi arm: dts: Import and update DT for Khadas VIM3 2019-10-18 11:57:00 +02:00
meson-g12b-odroid-n2-u-boot.dtsi ARM: dts: meson-sm1: add U-Boot specific DT for graphics 2019-10-18 14:40:32 +02:00
meson-g12b-odroid-n2.dts arm: dts: Import and update DT for Khadas VIM3 2019-10-18 11:57:00 +02:00
meson-g12b-s922x.dtsi arm: dts: Import and update DT for Khadas VIM3 2019-10-18 11:57:00 +02:00
meson-g12b.dtsi arm: dts: Import and update DT for Khadas VIM3 2019-10-18 11:57:00 +02:00
meson-gx-u-boot.dtsi arm64: dts: meson-gx: add hhi reg entry to hdmi_tx 2019-01-31 09:35:01 +01:00
meson-gx.dtsi ARM: meson: Add regmap support for clock driver 2018-12-03 13:34:21 +01:00
meson-gxbb-nanopi-k2-u-boot.dtsi arm64: dts: meson-gx: vpu should be probed before relocation 2019-01-31 09:35:01 +01:00
meson-gxbb-nanopi-k2.dts ARM: meson: Add regmap support for clock driver 2018-12-03 13:34:21 +01:00
meson-gxbb-odroidc2-u-boot.dtsi arm64: dts: meson-gx: vpu should be probed before relocation 2019-01-31 09:35:01 +01:00
meson-gxbb-odroidc2.dts ARM64: meson: Sync DT with Linux 4.17 2018-06-13 07:49:11 -04:00
meson-gxbb-p20x.dtsi ARM: dts: meson: add p200 and p201 boards 2019-04-10 16:48:31 +02:00
meson-gxbb-p200-u-boot.dtsi ARM: dts: meson: add u-boot.dtsi for p200 and p201 2019-04-10 16:48:31 +02:00
meson-gxbb-p200.dts ARM: dts: meson: add p200 and p201 boards 2019-04-10 16:48:31 +02:00
meson-gxbb-p201-u-boot.dtsi ARM: dts: meson: add u-boot.dtsi for p200 and p201 2019-04-10 16:48:31 +02:00
meson-gxbb-p201.dts ARM: dts: meson: add p200 and p201 boards 2019-04-10 16:48:31 +02:00
meson-gxbb.dtsi ARM: meson: Add regmap support for clock driver 2018-12-03 13:34:21 +01:00
meson-gxl-mali.dtsi ARM: meson: Add regmap support for clock driver 2018-12-03 13:34:21 +01:00
meson-gxl-s805x-libretech-ac.dts ARM: dts: Import libretech-ac DT from Linux 5.0 2019-04-10 16:50:46 +02:00
meson-gxl-s905x-khadas-vim-u-boot.dtsi arm64: dts: meson-gx: vpu should be probed before relocation 2019-01-31 09:35:01 +01:00
meson-gxl-s905x-khadas-vim.dts arm64: dts: meson-gx: Add hdmi_5v regulator as hdmi tx supply 2019-01-31 09:35:01 +01:00
meson-gxl-s905x-libretech-cc-u-boot.dtsi arm64: dts: meson-gx: vpu should be probed before relocation 2019-01-31 09:35:01 +01:00
meson-gxl-s905x-libretech-cc.dts arm64: dts: meson-gx: Add hdmi_5v regulator as hdmi tx supply 2019-01-31 09:35:01 +01:00
meson-gxl-s905x-p212-u-boot.dtsi arm64: dts: meson-gx: vpu should be probed before relocation 2019-01-31 09:35:01 +01:00
meson-gxl-s905x-p212.dts arm64: dts: meson-gx: Add hdmi_5v regulator as hdmi tx supply 2019-01-31 09:35:01 +01:00
meson-gxl-s905x-p212.dtsi ARM: meson: Add regmap support for clock driver 2018-12-03 13:34:21 +01:00
meson-gxl-s905x.dtsi ARM64: meson: Sync DT with Linux 4.17 2018-06-13 07:49:11 -04:00
meson-gxl.dtsi ARM: dts: Import libretech-ac DT from Linux 5.0 2019-04-10 16:50:46 +02:00
meson-gxm-khadas-vim2-u-boot.dtsi arm64: dts: meson-gx: vpu should be probed before relocation 2019-01-31 09:35:01 +01:00
meson-gxm-khadas-vim2.dts arm64: dts: meson-gx: Add hdmi_5v regulator as hdmi tx supply 2019-01-31 09:35:01 +01:00
meson-gxm.dtsi ARM: meson: Add Khadas VIM2 board DT 2018-10-10 13:32:40 -04:00
meson-khadas-vim3.dtsi arm: dts: Import and update DT for Khadas VIM3 2019-10-18 11:57:00 +02:00
meson-sm1-khadas-vim3l.dts ARM: dts: Import Khadas VIM3L DT from Linux 5.5-rc1 2020-01-07 11:16:53 +01:00
meson-sm1-sei610-u-boot.dtsi ARM: dts: meson-sm1: add U-Boot specific DT for graphics 2019-10-18 14:40:32 +02:00
meson-sm1-sei610.dts ARM: dts: Import SEI610 DT from Linux 5.4-rc2 2019-10-18 14:29:59 +02:00
meson-sm1.dtsi ARM: dts: Import SEI610 DT from Linux 5.4-rc2 2019-10-18 14:29:59 +02:00
mt7622-rfb.dts arm: dts: mediatek: add ethernet and sgmii dts node for mt7622 2020-02-07 13:59:58 -05:00
mt7622-u-boot.dtsi ARM: MediaTek: Add support for MediaTek MT7622 SoC 2020-01-16 09:39:45 -05:00
mt7622.dtsi arm: dts: mediatek: add ethernet and sgmii dts node for mt7622 2020-02-07 13:59:58 -05:00
mt7623-u-boot.dtsi arm: dts: mediatek: move u-boot properties to -u-boot.dtsi file 2020-01-16 09:39:45 -05:00
mt7623.dtsi arm: dts: mediatek: move u-boot properties to -u-boot.dtsi file 2020-01-16 09:39:45 -05:00
mt7623n-bananapi-bpi-r2.dts arm: dts: mediatek: move u-boot properties to -u-boot.dtsi file 2020-01-16 09:39:45 -05:00
mt7629-rfb-u-boot.dtsi arm: dts: mediatek: move u-boot properties to -u-boot.dtsi file 2020-01-16 09:39:45 -05:00
mt7629-rfb.dts arm: dts: mediatek: move u-boot properties to -u-boot.dtsi file 2020-01-16 09:39:45 -05:00
mt7629.dtsi arm: dts: mediatek: move u-boot properties to -u-boot.dtsi file 2020-01-16 09:39:45 -05:00
mt8512-bm1-emmc.dts ARM: MediaTek: add basic support for MT8512 boards 2020-01-16 09:39:45 -05:00
mt8512.dtsi ARM: MediaTek: Add support for MediaTek MT8512 SoC 2020-01-16 09:39:45 -05:00
mt8516-pumpkin.dts board: mediatek: Add pumpkin board support 2019-07-29 09:32:11 -04:00
mt8516-u-boot.dtsi ARM: MediaTek: Add support for MT8516 SoC 2019-04-23 17:57:26 -04:00
mt8516.dtsi ARM: MediaTek: Add support for MT8516 SoC 2019-04-23 17:57:26 -04:00
mt8518-ap1-emmc.dts ARM: MediaTek: add basic support for MT8518 boards 2019-12-03 12:00:03 -05:00
mt8518.dtsi usb: musb-new: mt85xx: add musb-new gadget driver. 2020-01-25 12:04:36 -05:00
mxs-pinfunc.h ARM: dts: imx: Copy imx28 device tree related files from Linux kernel (v5.1.11) 2019-07-19 14:57:14 +02:00
omap-gpmc-smsc911x.dtsi ARM: dts: omap3-evm: Add support for TMDSEVM{3530, 3730} 2018-01-01 09:04:19 -05:00
omap-gpmc-smsc9221.dtsi OMAP3: Add SMSC9221 device tree for omap devices connected on GPMC. 2017-05-09 20:35:37 -04:00
omap3-beagle-u-boot.dtsi omap3_beagle: Update for DM SPL support 2019-02-19 16:58:23 -05:00
omap3-beagle-xm-ab-u-boot.dtsi omap3_beagle: Update for DM SPL support 2019-02-19 16:58:23 -05:00
omap3-beagle-xm-ab.dts ARM: dts: omap3-beagle{-xm}: Add support for BeagleBoard 2018-01-19 15:49:28 -05:00
omap3-beagle-xm-u-boot.dtsi omap3_beagle: Update for DM SPL support 2019-02-19 16:58:23 -05:00
omap3-beagle-xm.dts ARM: dts: omap3-beagle{-xm}: Add support for BeagleBoard 2018-01-19 15:49:28 -05:00
omap3-beagle.dts ARM: dts: omap3-beagle{-xm}: Add support for BeagleBoard 2018-01-19 15:49:28 -05:00
omap3-cpu-thermal.dtsi arm: dts: omap3: Re-sync DTS files with Linux 4.13-RC5 2017-09-13 09:24:26 -04:00
omap3-evm-37xx-u-boot.dtsi ARM: omap3: evm: Update DM SPL support 2019-02-19 16:58:24 -05:00
omap3-evm-37xx.dts ARM: dts: omap3-evm: Sync dts(i) files from Linux 5.1.5 2019-07-13 11:11:27 -04:00
omap3-evm-common.dtsi ARM: dts: omap3-evm: Sync dts(i) files from Linux 5.1.5 2019-07-13 11:11:27 -04:00
omap3-evm-processor-common.dtsi ARM: dts: omap3-evm: Sync dts(i) files from Linux 5.1.5 2019-07-13 11:11:27 -04:00
omap3-evm-u-boot.dtsi ARM: omap3: evm: Update DM SPL support 2019-02-19 16:58:24 -05:00
omap3-evm.dts ARM: dts: omap3-evm: Add support for TMDSEVM{3530, 3730} 2018-01-01 09:04:19 -05:00
omap3-igep.dtsi omap3: igep00x0: Add Device Tree Support and DM_MMC driver 2019-01-15 15:28:42 -05:00
omap3-igep0020-common.dtsi omap3: igep00x0: Add Device Tree Support and DM_MMC driver 2019-01-15 15:28:42 -05:00
omap3-igep0020-u-boot.dtsi omap3: igep00x0: Add Device Tree Support and DM_MMC driver 2019-01-15 15:28:42 -05:00
omap3-igep0020.dts omap3: igep00x0: Add Device Tree Support and DM_MMC driver 2019-01-15 15:28:42 -05:00
omap3-panel-sharp-ls037v7dw01.dtsi ARM: dts: omap3-evm: Add support for TMDSEVM{3530, 3730} 2018-01-01 09:04:19 -05:00
omap3-u-boot.dtsi ARM: DTS: omap3-u-boot.dtsi 2019-02-19 16:58:23 -05:00
omap3.dtsi ARM: dts: Resync OMAP3 and omap36xx with Linux 4.18-RC4 2018-07-23 14:33:21 -04:00
omap3xxx-clocks.dtsi arm: dts: omap3: Re-sync DTS files with Linux 4.13-RC5 2017-09-13 09:24:26 -04:00
omap4-cpu-thermal.dtsi
omap5-core-thermal.dtsi
omap5-gpu-thermal.dtsi
omap5-u-boot.dtsi ARM: dts: dra7: Add usb peripheral nodes in spl 2019-10-25 17:33:21 -04:00
omap34xx-omap36xx-clocks.dtsi arm: dts: omap3: Re-sync DTS files with Linux 4.13-RC5 2017-09-13 09:24:26 -04:00
omap34xx.dtsi ARM: dts: omap3-evm: Add support for TMDSEVM{3530, 3730} 2018-01-01 09:04:19 -05:00
omap36xx-am35xx-omap3430es2plus-clocks.dtsi arm: dts: omap3: Re-sync DTS files with Linux 4.13-RC5 2017-09-13 09:24:26 -04:00
omap36xx-clocks.dtsi arm: dts: omap3: Re-sync DTS files with Linux 4.13-RC5 2017-09-13 09:24:26 -04:00
omap36xx-omap3430es2plus-clocks.dtsi arm: dts: omap3: Re-sync DTS files with Linux 4.13-RC5 2017-09-13 09:24:26 -04:00
omap36xx.dtsi ARM: dts: Resync OMAP3 and omap36xx with Linux 4.18-RC4 2018-07-23 14:33:21 -04:00
phytium-durian.dts arm: add initial support for the Phytium Durian Board 2019-11-07 18:01:13 -05:00
poplar-pinctrl.dtsi poplar: sync up device tree with kernel 4.20 2019-01-25 12:12:56 -05:00
px30-evb-u-boot.dtsi rockchip: px30: enable spl-fifo-mode for both emmc and sdmmc on evb 2019-11-23 23:41:44 +08:00
px30-evb.dts rockchip: add px30 devicetrees 2019-11-17 17:23:20 +08:00
px30-firefly-u-boot.dtsi rockchip: px30-firefly add standalone dts 2019-12-27 14:26:13 +08:00
px30-firefly.dts rockchip: px30-firefly add standalone dts 2019-12-27 14:26:13 +08:00
px30.dtsi rockchip: px30: sync the main px30 dtsi from mainline 2020-02-19 16:45:38 +08:00
r7s72100-gr-peach-u-boot.dts ARM: renesas: Enable R8A66597 USB host on GR Peach 2019-08-22 18:23:37 +02:00
r7s72100-gr-peach.dts ARM: dts: renesas: Add RZ/A1 GR-Peach board 2019-05-07 05:41:32 +02:00
r7s72100.dtsi ARM: dts: renesas: Add RZ/A1 platform code 2019-05-07 05:41:32 +02:00
r8a779x-u-boot.dtsi SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
r8a7790-lager-u-boot.dts ARM: dts: rmobile: Force 1-bit bus width on Gen2 QSPI 2019-03-09 17:57:04 +01:00
r8a7790-lager.dts ARM: dts: rmobile: Synchronize Gen2 DTs with Linux 5.0 2019-04-09 18:19:10 +02:00
r8a7790-stout-u-boot.dts ARM: dts: rmobile: Force 1-bit bus width on Gen2 QSPI 2019-03-09 17:57:04 +01:00
r8a7790-stout.dts ARM: dts: rmobile: Synchronize Gen2 DTs with Linux 5.0 2019-04-09 18:19:10 +02:00
r8a7790-u-boot.dtsi SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
r8a7790.dtsi ARM: dts: rmobile: Synchronize Gen2 DTs with Linux 5.0 2019-04-09 18:19:10 +02:00
r8a7791-koelsch-u-boot.dts ARM: dts: rmobile: Force 1-bit bus width on Gen2 QSPI 2019-03-09 17:57:04 +01:00
r8a7791-koelsch.dts ARM: dts: rmobile: Synchronize Gen2 DTs with Linux 5.0 2019-04-09 18:19:10 +02:00
r8a7791-porter-u-boot.dts ARM: dts: rmobile: Force 1-bit bus width on Gen2 QSPI 2019-03-09 17:57:04 +01:00
r8a7791-porter.dts ARM: dts: rmobile: Synchronize Gen2 DTs with Linux 5.0 2019-04-09 18:19:10 +02:00
r8a7791-u-boot.dtsi SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
r8a7791.dtsi ARM: dts: rmobile: Synchronize Gen2 DTs with Linux 5.0 2019-04-09 18:19:10 +02:00
r8a7792-blanche-u-boot.dts ARM: dts: rmobile: Enable IIC3 on V2H Blanche 2020-03-30 03:49:23 +02:00
r8a7792-blanche.dts ARM: dts: rmobile: Sync Gen2 DTs with Linux 4.19.6 2018-12-04 09:21:07 +01:00
r8a7792-u-boot.dtsi SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
r8a7792.dtsi ARM: dts: rmobile: Add IIC3 node on Gen2 R8A7792 V2H 2020-03-30 03:49:23 +02:00
r8a7793-gose-u-boot.dts ARM: dts: rmobile: Force 1-bit bus width on Gen2 QSPI 2019-03-09 17:57:04 +01:00
r8a7793-gose.dts ARM: dts: rmobile: Synchronize Gen2 DTs with Linux 5.0 2019-04-09 18:19:10 +02:00
r8a7793-u-boot.dtsi SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
r8a7793.dtsi ARM: dts: rmobile: Synchronize Gen2 DTs with Linux 5.0 2019-04-09 18:19:10 +02:00
r8a7794-alt-u-boot.dts ARM: dts: rmobile: Enable USB on E2 Alt 2019-04-09 18:19:10 +02:00
r8a7794-alt.dts ARM: dts: rmobile: Sync Gen2 DTs with Linux 4.19.6 2018-12-04 09:21:07 +01:00
r8a7794-silk-u-boot.dts ARM: dts: rmobile: Force 1-bit bus width on Gen2 QSPI 2019-03-09 17:57:04 +01:00
r8a7794-silk.dts ARM: dts: rmobile: Synchronize Gen2 DTs with Linux 5.0 2019-04-09 18:19:10 +02:00
r8a7794-u-boot.dtsi SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
r8a7794.dtsi ARM: dts: rmobile: Synchronize Gen2 DTs with Linux 5.0 2019-04-09 18:19:10 +02:00
r8a7795-h3ulcb-u-boot.dts ARM: dts: rmobile: Restore increase off-on delay on the SD Vcc regulator 2019-09-30 02:07:02 +02:00
r8a7795-h3ulcb.dts ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.0 2019-04-09 18:19:10 +02:00
r8a7795-salvator-x-u-boot.dts ARM: dts: rmobile: Restore increase off-on delay on the SD Vcc regulator 2019-09-30 02:07:02 +02:00
r8a7795-salvator-x.dts ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.0 2019-04-09 18:19:10 +02:00
r8a7795-u-boot.dtsi ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.0 2019-04-09 18:19:10 +02:00
r8a7795.dtsi ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.2 2019-07-23 13:38:23 +02:00
r8a7796-m3ulcb-u-boot.dts ARM: dts: rmobile: Restore increase off-on delay on the SD Vcc regulator 2019-09-30 02:07:02 +02:00
r8a7796-m3ulcb.dts ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.0 2019-04-09 18:19:10 +02:00
r8a7796-salvator-x-u-boot.dts ARM: dts: rmobile: Restore increase off-on delay on the SD Vcc regulator 2019-09-30 02:07:02 +02:00
r8a7796-salvator-x.dts ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.2 2019-07-23 13:38:23 +02:00
r8a7796-u-boot.dtsi ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.0 2019-04-09 18:19:10 +02:00
r8a7796.dtsi ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.2 2019-07-23 13:38:23 +02:00
r8a77965-m3nulcb-u-boot.dts ARM: dts: rmobile: Restore increase off-on delay on the SD Vcc regulator 2019-09-30 02:07:02 +02:00
r8a77965-m3nulcb.dts ARM: dts: rmobile: Import R8A77965 M3NULCB DTs 2019-04-09 18:19:10 +02:00
r8a77965-salvator-x-u-boot.dts ARM: dts: rmobile: Restore increase off-on delay on the SD Vcc regulator 2019-09-30 02:07:02 +02:00
r8a77965-salvator-x.dts ARM: dts: rmobile: Sync Gen3 DTs with Linux 4.19.6 2018-12-04 09:21:07 +01:00
r8a77965-u-boot.dtsi ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.0 2019-04-09 18:19:10 +02:00
r8a77965.dtsi ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.2 2019-07-23 13:38:23 +02:00
r8a77970-eagle-u-boot.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
r8a77970-eagle.dts ARM: dts: rmobile: Sync Gen3 DTs with Linux 4.19.6 2018-12-04 09:21:07 +01:00
r8a77970-u-boot.dtsi ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.0 2019-04-09 18:19:10 +02:00
r8a77970.dtsi ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.0 2019-04-09 18:19:10 +02:00
r8a77980-condor-u-boot.dts ARM: renesas: Add R8A77980 V3H Condor board code 2019-08-09 23:15:01 +02:00
r8a77980-condor.dts ARM: renesas: Add R8A77980 V3H Condor board code 2019-08-09 23:15:01 +02:00
r8a77980-u-boot.dtsi ARM: dts: renesas: Add R8A77980 V3H DTs and headers 2019-08-09 23:15:01 +02:00
r8a77980.dtsi ARM: dts: renesas: Add R8A77980 V3H DTs and headers 2019-08-09 23:15:01 +02:00
r8a77990-ebisu-u-boot.dts ARM: dts: rmobile: Restore increase off-on delay on the SD Vcc regulator 2019-09-30 02:07:02 +02:00
r8a77990-ebisu.dts ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.2 2019-07-23 13:38:23 +02:00
r8a77990-u-boot.dtsi ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.0 2019-04-09 18:19:10 +02:00
r8a77990.dtsi ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.2 2019-07-23 13:38:23 +02:00
r8a77995-draak-u-boot.dts SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
r8a77995-draak.dts ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.2 2019-07-23 13:38:23 +02:00
r8a77995-u-boot.dtsi ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.0 2019-04-09 18:19:10 +02:00
r8a77995.dtsi ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.0 2019-04-09 18:19:10 +02:00
rk3xxx.dtsi SPDX: Convert all of our multiple license tags to Linux Kernel style 2018-05-07 10:24:31 -04:00
rk322x.dtsi ARM: dts: rk322x: Correct the uart2 default pin configuration 2019-02-01 16:59:11 +01:00
rk3036-sdk-u-boot.dtsi arm: dts: rk3036: Add rk3036-u-boot.dtsi 2020-01-30 11:44:01 +08:00
rk3036-sdk.dts SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
rk3036-u-boot.dtsi rockchip: Add Single boot image (with binman, pad_cat) 2020-01-30 11:44:01 +08:00
rk3036.dtsi SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
rk3128-evb.dts SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
rk3128.dtsi SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
rk3188-radxarock-u-boot.dtsi arm: dts: rk3188: Add rk3188-u-boot.dtsi 2020-01-30 11:44:01 +08:00
rk3188-radxarock.dts rockchip: rk3188: explicitly set vcc_sd0 pin to gpio on rk3188-radxarock 2018-10-02 09:35:39 +02:00
rk3188-u-boot.dtsi rockchip: Add Single boot image (with binman, pad_cat) 2020-01-30 11:44:01 +08:00
rk3188.dtsi SPDX: Convert all of our multiple license tags to Linux Kernel style 2018-05-07 10:24:31 -04:00
rk3229-evb.dts rockchip: rk322x: dts: enable uart2 for SPL/TPL 2019-05-08 17:34:12 +08:00
rk3288-evb-u-boot.dtsi rockchip: evb-rk3288: add -u-boot.dtsi 2019-07-20 23:59:44 +08:00
rk3288-evb.dts rockchip: evb-rk3288: add -u-boot.dtsi 2019-07-20 23:59:44 +08:00
rk3288-evb.dtsi rockchip: rk3288-evb: dts: remove 'vmmc' from emmc node 2018-12-15 20:56:46 +01:00
rk3288-firefly-u-boot.dtsi rockchip: rk3288-firefly: sync sdmmc pinctrl from mainline 2019-07-20 23:59:44 +08:00
rk3288-firefly.dts rockchip: firefly-rk3288: add -u-boot.dtsi 2019-07-20 23:59:44 +08:00
rk3288-firefly.dtsi rockchip: rk3288-firefly: sync sdmmc pinctrl from mainline 2019-07-20 23:59:44 +08:00
rk3288-miqi-u-boot.dtsi rockchip: miqi-rk3288: add -u-boot.dtsi 2019-07-20 23:59:44 +08:00
rk3288-miqi.dts rockchip: miqi-rk3288: add -u-boot.dtsi 2019-07-20 23:59:44 +08:00
rk3288-miqi.dtsi SPDX: Convert all of our multiple license tags to Linux Kernel style 2018-05-07 10:24:31 -04:00
rk3288-phycore-rdk.dts rockchip: phycore: remove no use "u-boot, boot0" in dts 2019-07-29 10:25:27 +08:00
rk3288-phycore-som.dtsi rockchip: phycore: Add ID page of M24C32-D EEPROM 2017-07-27 14:59:01 +02:00
rk3288-popmetal-u-boot.dtsi rockchip: popmetal-rk3288: add -u-boot.dtsi 2019-07-20 23:59:44 +08:00
rk3288-popmetal.dts rockchip: popmetal-rk3288: add -u-boot.dtsi 2019-07-20 23:59:44 +08:00
rk3288-popmetal.dtsi rockchip: dts: Enable SARADC for rk3288-popmetal 2017-10-01 00:33:30 +02:00
rk3288-rock2-som.dtsi rockchip: rock2: Bring in device tree files from Linux 2016-01-21 20:42:37 -07:00
rk3288-rock2-square.dts dts: rk3288: remove node in dmc which not need anymore 2016-10-30 13:29:06 -06:00
rk3288-thermal.dtsi SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
rk3288-tinker-s-u-boot.dtsi rockchip: dts: tinker: Add tinker-s board support 2019-11-17 18:51:25 +08:00
rk3288-tinker-s.dts rockchip: dts: tinker: Add tinker-s board support 2019-11-17 18:51:25 +08:00
rk3288-tinker-u-boot.dtsi rockchip: dts: tinker: Move u-boot dmc initialization to specific section 2019-11-17 18:51:25 +08:00
rk3288-tinker.dts rockchip: dts: tinker: Move u-boot dmc initialization to specific section 2019-11-17 18:51:25 +08:00
rk3288-tinker.dtsi rockchip: dts: fix unnecessary '-cells' warning 2018-08-29 20:44:50 +02:00
rk3288-u-boot.dtsi rockchip: Add Single boot image (with binman, pad_cat) 2020-01-30 11:44:01 +08:00
rk3288-veyron-chromebook.dtsi SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
rk3288-veyron-jerry.dts sound: rockchip: Add sound support for jerry 2019-02-01 16:59:10 +01:00
rk3288-veyron-mickey.dts rockchip: Add support for veyron-mickey (Chromebit) 2016-11-25 17:59:32 -07:00
rk3288-veyron-minnie.dts rockchip: chromebook_minnie: Enable sound 2019-05-08 17:34:12 +08:00
rk3288-veyron-speedy-u-boot.dtsi rockchip: dts: rk3288: move reloc tag into -u-boot dts 2019-07-02 11:49:49 +08:00
rk3288-veyron-speedy.dts rockchip: add support for veyron-speedy (ASUS Chromebook C201) 2019-02-01 16:59:10 +01:00
rk3288-veyron.dtsi rockchip: rk3288-veyron: Migrate "u-boot, boot0" to "u-boot, spl-boot-order" 2019-07-29 10:25:27 +08:00
rk3288-vyasa-u-boot.dtsi rockchip: dts: rk3288: move reloc tag into -u-boot dts 2019-07-02 11:49:49 +08:00
rk3288-vyasa.dts ARM: dts: rockchip: Sync rk3288-vyasa dts from linux 2020-02-19 16:45:38 +08:00
rk3288.dtsi rockchip: dts: rk3288: move reloc tag into -u-boot dts 2019-07-02 11:49:49 +08:00
rk3308-evb-u-boot.dtsi arm: dts: rockchip: Add dts for rk3308 evb 2019-11-17 17:22:53 +08:00
rk3308-evb.dts arm: dts: rockchip: Add dts for rk3308 evb 2019-11-17 17:22:53 +08:00
rk3308-roc-cc-u-boot.dtsi rockchip: rk3308: Add dts for ROC-RK3308-CC 2019-11-17 17:22:53 +08:00
rk3308-roc-cc.dts dts: rk3308: Enable ethernet function supported for Firefly ROC_RK3308_CC 2019-12-06 00:06:23 +08:00
rk3308-u-boot.dtsi rockchip: rk3308: add alias for emmc/sdmmc 2020-01-30 11:44:02 +08:00
rk3308.dtsi arm: dts: Add mac node for rk3308 at dtsi level 2019-12-06 00:06:23 +08:00
rk3328-evb-u-boot.dtsi rockchip: rk3328: migrate u-boot node to -u-boot.dtsi 2019-08-23 15:27:40 +08:00
rk3328-evb.dts rockchip: rk3328: migrate u-boot node to -u-boot.dtsi 2019-08-23 15:27:40 +08:00
rk3328-rock64-u-boot.dtsi rockchip: dts: rk3328: rock64: Add same-as-spl order 2019-11-10 20:40:20 +08:00
rk3328-rock64.dts rockchip: dts: rk3328-rock64: fix usb power supply 2019-08-23 15:27:40 +08:00
rk3328-sdram-ddr3-666.dtsi ram: rk3328: use common sdram driver 2019-11-17 16:23:56 +08:00
rk3328-sdram-ddr4-666.dtsi ram: rk3328: add support ddr4 init 2020-01-30 11:44:01 +08:00
rk3328-sdram-lpddr3-666.dtsi ram: rk3328: update lpddr3 setting 2020-01-30 11:44:01 +08:00
rk3328-sdram-lpddr3-1600.dtsi ram: rk3328: use common sdram driver 2019-11-17 16:23:56 +08:00
rk3328-u-boot.dtsi rockchip: rk3328: enable spl-fifo-mode for emmc and sdmmc 2019-12-31 15:57:55 +08:00
rk3328.dtsi rockchip: rk3328: migrate u-boot node to -u-boot.dtsi 2019-08-23 15:27:40 +08:00
rk3368-geekbox-u-boot.dtsi SPDX: Convert all of our multiple license tags to Linux Kernel style 2018-05-07 10:24:31 -04:00
rk3368-geekbox.dts rockchip: rk3368: Add initial support for RK3368 based GeekBox 2017-06-07 07:29:20 -06:00
rk3368-lion-u-boot.dtsi rockchip: rk3368-lion: switch to use ARM generic timer 2019-07-20 23:59:44 +08:00
rk3368-lion.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
rk3368-px5-evb-u-boot.dtsi rockchip: px5: enable spl-fifo-mode for emmc for px5-evb 2019-12-05 23:53:07 +08:00
rk3368-px5-evb.dts rockchip: dts: Enable SARADC for rk3368-px5-evb 2017-10-01 00:33:30 +02:00
rk3368-sheep-u-boot.dtsi SPDX: Convert all of our multiple license tags to Linux Kernel style 2018-05-07 10:24:31 -04:00
rk3368-sheep.dts SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
rk3368.dtsi dts: rk3368: make timer0 accessible for SPL and TPL 2017-08-13 17:12:36 +02:00
rk3399-evb-u-boot.dtsi rockchip: dts: rk3399-evb: move u-boot, spl-boot-order to to the u-boot.dtsi 2019-11-17 17:22:53 +08:00
rk3399-evb.dts arm: dts: rockchip: Update EVB/Puma devices to upstream USB/dwc3 conventions 2020-02-19 16:45:38 +08:00
rk3399-ficus-u-boot.dtsi arm: dts: ficus: Enable booting from eMMC when using SPL 2019-08-05 21:14:13 +08:00
rk3399-ficus.dts arm64: rockchip: rock960: sync dts files from Linux 5.2-rc6 2019-07-19 11:11:09 +08:00
rk3399-firefly-u-boot.dtsi rockchip: dts: rk3399-firefly: move u-boot, spl-boot-order to to the u-boot.dtsi 2019-11-17 17:22:53 +08:00
rk3399-firefly.dts rockchip: dts: rk3399-firefly: move u-boot, spl-boot-order to to the u-boot.dtsi 2019-11-17 17:22:53 +08:00
rk3399-gru-bob-u-boot.dtsi arm64: rockchip: dts: rk3399: Use rk3399-u-boot.dtsi 2019-05-08 17:34:13 +08:00
rk3399-gru-bob.dts arm64: rockchip: dts: rk3399: Add board -u-boot.dtsi files 2019-05-08 17:34:13 +08:00
rk3399-gru-chromebook.dtsi rockchip: gru: Add extra device-tree settings 2019-02-01 16:59:13 +01:00
rk3399-gru-kevin.dts rockchip: Bring in device tree files for rk3399-gru 2019-02-01 16:59:12 +01:00
rk3399-gru-u-boot.dtsi arm64: rockchip: dts: rk3399: Use rk3399-u-boot.dtsi 2019-05-08 17:34:13 +08:00
rk3399-gru.dtsi rockchip: rk3399: Move u-boot, dm-pre-reloc of uart0, uart2 2019-06-26 21:11:28 +08:00
rk3399-khadas-edge-captain-u-boot.dtsi arm64: dts: rockchip: Add support for Khadas Edge-Captain 2019-08-05 21:12:23 +08:00
rk3399-khadas-edge-captain.dts arm64: dts: rockchip: Add support for Khadas Edge-Captain 2019-08-05 21:12:23 +08:00
rk3399-khadas-edge-u-boot.dtsi rockchip: rk3399: khadas-edge: Add init value for vdd_log 2019-11-17 17:22:53 +08:00
rk3399-khadas-edge-v-u-boot.dtsi arm64: dts: rockchip: Add support for Khadas Edge-V 2019-08-05 21:05:56 +08:00
rk3399-khadas-edge-v.dts arm64: dts: rockchip: Add support for Khadas Edge-V 2019-08-05 21:05:56 +08:00
rk3399-khadas-edge.dts arm64: dts: rockchip: Add support for Khadas Edge 2019-08-05 21:05:29 +08:00
rk3399-khadas-edge.dtsi arm64: dts: rockchip: Add support for Khadas Edge 2019-08-05 21:05:29 +08:00
rk3399-leez-p710-u-boot.dtsi rockchip: rk3399: Add Leez P710 support 2019-11-10 20:40:20 +08:00
rk3399-leez-p710.dts rockchip: rk3399: Add Leez P710 support 2019-11-10 20:40:20 +08:00
rk3399-nanopc-t4-u-boot.dtsi rockchip: rk3399: Add Nanopc T4 board support 2019-05-09 18:24:31 +08:00
rk3399-nanopc-t4.dts rockchip: rk3399: Add Nanopc T4 board support 2019-05-09 18:24:31 +08:00
rk3399-nanopi-m4-u-boot.dtsi rockchip: rk3399: Add Nanopi M4 board support 2019-05-09 18:24:31 +08:00
rk3399-nanopi-m4.dts rockchip: rk3399: Add Nanopi M4 board support 2019-05-09 18:24:31 +08:00
rk3399-nanopi-neo4-u-boot.dtsi rockchip: dts: rk3399: nanopi-neo4: Use DDR3-1866 dtsi 2019-07-20 23:59:44 +08:00
rk3399-nanopi-neo4.dts rockchip: rk3399: Add Nanopi NEO4 board support 2019-05-30 18:22:35 +08:00
rk3399-nanopi4-u-boot.dtsi rockchip: rk3399: Add Nanopi M4 board support 2019-05-09 18:24:31 +08:00
rk3399-nanopi4.dtsi rockchip: dts: rk3399: Sync rk3399-nanopi4.dtsi from Linux 2019-05-08 17:34:13 +08:00
rk3399-op1-opp.dtsi rockchip: Bring in device tree files for rk3399-gru 2019-02-01 16:59:12 +01:00
rk3399-opp.dtsi rockchip: dts: rk3399: Sync rk3399-opp from Linux 2019-05-01 00:00:04 +02:00
rk3399-orangepi-u-boot.dtsi rockchip: rk3399: orangepi: Add init value for vdd_log 2019-11-17 17:22:53 +08:00
rk3399-orangepi.dts rockchip: rk3399: Add Orangepi RK3399 support 2019-05-01 00:00:05 +02:00
rk3399-puma-ddr1333-u-boot.dtsi arm: dts: rockchip: puma: move U-Boot specific bits to u-boot.dtsi 2020-02-19 16:45:38 +08:00
rk3399-puma-ddr1333.dts arm: dts: rockchip: puma: move U-Boot specific bits to u-boot.dtsi 2020-02-19 16:45:38 +08:00
rk3399-puma-ddr1600-u-boot.dtsi arm: dts: rockchip: puma: move U-Boot specific bits to u-boot.dtsi 2020-02-19 16:45:38 +08:00
rk3399-puma-ddr1600.dts arm: dts: rockchip: puma: move U-Boot specific bits to u-boot.dtsi 2020-02-19 16:45:38 +08:00
rk3399-puma-ddr1866-u-boot.dtsi arm: dts: rockchip: puma: move U-Boot specific bits to u-boot.dtsi 2020-02-19 16:45:38 +08:00
rk3399-puma-ddr1866.dts arm: dts: rockchip: puma: move U-Boot specific bits to u-boot.dtsi 2020-02-19 16:45:38 +08:00
rk3399-puma-u-boot.dtsi arm: dts: rockchip: puma: move U-Boot specific bits to u-boot.dtsi 2020-02-19 16:45:38 +08:00
rk3399-puma.dtsi arm: dts: rockchip: puma: move U-Boot specific bits to u-boot.dtsi 2020-02-19 16:45:38 +08:00
rk3399-roc-pc-u-boot.dtsi roc-pc-rk3399: Enable SPI Flash 2020-01-30 11:44:01 +08:00
rk3399-roc-pc.dts rockchip: dts: Sync ROC-RK3399-PC changes from Linux 2020-01-30 11:44:01 +08:00
rk3399-roc-pc.dtsi rockchip: dts: Sync ROC-RK3399-PC changes from Linux 2020-01-30 11:44:01 +08:00
rk3399-rock-pi-4-u-boot.dtsi rockchip: rk3399: rock-pi4: Add init value for vdd_log 2019-11-17 17:22:53 +08:00
rk3399-rock-pi-4.dts rockchip: rk3399: Add Rock PI 4 support 2019-05-30 18:22:35 +08:00
rk3399-rock960-u-boot.dtsi arm64: dts: rk3399-rock960: add vdd_log and its init value 2019-11-17 17:22:53 +08:00
rk3399-rock960.dts arm64: rockchip: rock960: sync dts files from Linux 5.2-rc6 2019-07-19 11:11:09 +08:00
rk3399-rock960.dtsi arm64: rockchip: rock960: sync dts files from Linux 5.2-rc6 2019-07-19 11:11:09 +08:00
rk3399-rockpro64-u-boot.dtsi rockpro-rk3399: Enable SPI Flash 2020-01-30 11:44:01 +08:00
rk3399-rockpro64.dts arm: dts: rk3399-rockpro64: sync dts from linux kernel 2019-11-17 17:22:53 +08:00
rk3399-sdram-ddr3-1333.dtsi ram: rk3399: migrate to use common code 2019-11-17 16:23:56 +08:00
rk3399-sdram-ddr3-1600.dtsi ram: rk3399: migrate to use common code 2019-11-17 16:23:56 +08:00
rk3399-sdram-ddr3-1866.dtsi ram: rk3399: migrate to use common code 2019-11-17 16:23:56 +08:00
rk3399-sdram-lpddr3-2GB-1600.dtsi ram: rk3399: migrate to use common code 2019-11-17 16:23:56 +08:00
rk3399-sdram-lpddr3-4GB-1600.dtsi ram: rk3399: migrate to use common code 2019-11-17 16:23:56 +08:00
rk3399-sdram-lpddr3-samsung-4GB-1866.dtsi ram: rk3399: migrate to use common code 2019-11-17 16:23:56 +08:00
rk3399-sdram-lpddr4-100.dtsi ram: rk3399: migrate to use common code 2019-11-17 16:23:56 +08:00
rk3399-u-boot.dtsi arm: dts: rockchip: rk3399: Move U-Boot specific bits to rk3399-u-boot 2020-02-19 16:45:38 +08:00
rk3399.dtsi arm: dts: rockchip: rk3399: Move U-Boot specific bits to rk3399-u-boot 2020-02-19 16:45:38 +08:00
rockchip-u-boot.dtsi rockchip: Add Single boot image (with binman, pad_cat) 2020-01-30 11:44:01 +08:00
rv1108-elgin-r1.dts ARM: dts: Activate pullups in the console pins on rv1108-elgin-r1 2020-03-26 22:58:46 +08:00
rv1108-evb.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
rv1108-u-boot.dtsi rv1108: Fix boot regression 2020-03-26 22:58:46 +08:00
rv1108.dtsi ARM: dts: rockchip: Add rv1108 USB OTG pinctrl 2018-11-30 21:56:45 +01:00
s5pc1xx-goni.dts SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
s5pc1xx-smdkc100.dts SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
s5pc100-pinctrl.dtsi SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
s5pc110-pinctrl.dtsi SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
s900.dtsi arm: dts: s900: Add UART node 2018-07-09 15:25:35 -04:00
salvator-common.dtsi ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.2 2019-07-23 13:38:23 +02:00
salvator-x.dtsi ARM: dts: rmobile: Sync Gen3 DTs with Linux 4.19.6 2018-12-04 09:21:07 +01:00
sam9x60.dtsi ARM: dts: sam9x60: add flx0 node 2019-10-24 13:01:57 +03:00
sam9x60ek-u-boot.dtsi ARM: dts: at91: sam9x60ek: Enable qspi node 2019-10-08 09:16:11 +03:00
sam9x60ek.dts ARM: dts: sam9x60ek: add i2c0 as flexcom0 subnode and eeprom memory 2019-10-24 13:01:57 +03:00
sama5d2-pinfunc.h atmel: Bring in at91 pio4 device tree file and bindings 2016-08-15 22:58:04 +02:00
sama5d2.dtsi ARM: dts: at91: sama5d2: add seq for qspi1 2019-10-08 09:16:11 +03:00
sama5d3.dtsi ARM: dts: at91: sama5d3_xplained: add onewire connector for LCD eeprom 2018-09-28 20:22:43 -04:00
sama5d3_can.dtsi ARM: at91: dt: add dts files for sama5d3xek board 2017-04-13 14:44:50 -06:00
sama5d3_emac.dtsi ARM: at91: dt: add dts files for sama5d3xek board 2017-04-13 14:44:50 -06:00
sama5d3_gmac.dtsi ARM: at91: dt: add dts files for sama5d3xek board 2017-04-13 14:44:50 -06:00
sama5d3_lcd.dtsi board: sama5d3xek: Convert to CONFIG_DM_VIDEO 2017-09-29 17:50:04 +02:00
sama5d3_mci2.dtsi ARM: at91: dt: add dts files for sama5d3xek board 2017-04-13 14:44:50 -06:00
sama5d3_tcb1.dtsi ARM: at91: dt: add dts files for sama5d3xek board 2017-04-13 14:44:50 -06:00
sama5d3_uart.dtsi ARM: at91: dt: add dts files for sama5d3xek board 2017-04-13 14:44:50 -06:00
sama5d3xcm.dtsi net: phy: micrel: Use correct skew values on KSZ9021 2019-05-08 17:27:01 -05:00
sama5d3xcm_cmp.dtsi net: phy: micrel: Use correct skew values on KSZ9021 2019-05-08 17:27:01 -05:00
sama5d3xdm.dtsi board: sama5d3xek: Convert to CONFIG_DM_VIDEO 2017-09-29 17:50:04 +02:00
sama5d3xmb.dtsi dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
sama5d3xmb_cmp.dtsi dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
sama5d4.dtsi ARM: dts: at91: sama5d4_xplained: add onewire connector for LCD eeprom 2018-09-28 20:22:44 -04:00
sama5d27_som1.dtsi dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
sama5d27_wlsom1.dtsi ARM: dts: at91: sama5d27_wlsom1_ek: add support for qspi 2019-10-08 09:16:11 +03:00
sama5d31.dtsi ARM: at91: dt: add dts files for sama5d3xek board 2017-04-13 14:44:50 -06:00
sama5d31ek.dts ARM: at91: dt: add dts files for sama5d3xek board 2017-04-13 14:44:50 -06:00
sama5d33.dtsi ARM: at91: dt: add dts files for sama5d3xek board 2017-04-13 14:44:50 -06:00
sama5d33ek.dts ARM: at91: dt: add dts files for sama5d3xek board 2017-04-13 14:44:50 -06:00
sama5d34.dtsi ARM: at91: dt: add dts files for sama5d3xek board 2017-04-13 14:44:50 -06:00
sama5d34ek.dts ARM: at91: dt: add dts files for sama5d3xek board 2017-04-13 14:44:50 -06:00
sama5d35.dtsi ARM: at91: dt: add dts files for sama5d3xek board 2017-04-13 14:44:50 -06:00
sama5d35ek.dts ARM: at91: dt: add dts files for sama5d3xek board 2017-04-13 14:44:50 -06:00
sama5d36.dtsi ARM: at91: dt: add dts files for sama5d3xek board 2017-04-13 14:44:50 -06:00
sama5d36ek.dts ARM: at91: dt: add dts files for sama5d3xek board 2017-04-13 14:44:50 -06:00
sama5d36ek_cmp.dts board: sama5d3xek: Convert to CONFIG_DM_VIDEO 2017-09-29 17:50:04 +02:00
skeleton.dtsi
skeleton64.dtsi
socfpga-common-u-boot.dtsi arm: dts: socfpga: Add u-boot, dm-pre-reloc for sysmgr and clkmgr nodes 2020-01-07 14:38:33 +01:00
socfpga.dtsi arm: dts: socfpga: Add u-boot, dm-pre-reloc for sysmgr and clkmgr nodes 2020-01-07 14:38:33 +01:00
socfpga_agilex-u-boot.dtsi arm: dts: agilex: Add base dtsi and devkit dts 2020-01-07 14:38:34 +01:00
socfpga_agilex.dtsi arm: dts: agilex: Add base dtsi and devkit dts 2020-01-07 14:38:34 +01:00
socfpga_agilex_socdk-u-boot.dtsi arm: dts: agilex: Enable QSPI 2020-03-31 02:52:38 +02:00
socfpga_agilex_socdk.dts arm: dts: agilex: Add base dtsi and devkit dts 2020-01-07 14:38:34 +01:00
socfpga_arria5.dtsi dts: arm: socfpga: merge gen5 devicetrees from linux 2018-11-29 12:45:15 +01:00
socfpga_arria5_secu1.dts ARM: socfpga: Add initial support for the ABB SECU board 2020-03-03 22:11:36 +01:00
socfpga_arria5_socdk-u-boot.dtsi arm: socfpga: gen5: add reset & sdr node to SPL devicetrees 2019-04-17 22:20:16 +02:00
socfpga_arria5_socdk.dts net: phy: micrel: Use correct skew values on KSZ9021 2019-05-08 17:27:01 -05:00
socfpga_arria10.dtsi arm: dts: socfpga: Add u-boot, dm-pre-reloc for sysmgr and clkmgr nodes 2020-01-07 14:38:33 +01:00
socfpga_arria10_handoff_u-boot.dtsi ARM: dts: socfpga: Keep FPGA bridge entries in SPL DT 2019-05-14 19:53:16 +02:00
socfpga_arria10_socdk.dtsi arm: dts: socfpga: Add u-boot, dm-pre-reloc for sysmgr and clkmgr nodes 2020-01-07 14:38:33 +01:00
socfpga_arria10_socdk_sdmmc.dts ARM: dts: socfpga: Factor out U-Boot specifics from A10 handoff files 2019-05-14 19:53:16 +02:00
socfpga_arria10_socdk_sdmmc_handoff.dtsi Arm: dts: socfpga: Remove invalid property from chose node 2019-05-24 14:29:51 +02:00
socfpga_cyclone5.dtsi dts: arm: socfpga: merge gen5 devicetrees from linux 2018-11-29 12:45:15 +01:00
socfpga_cyclone5_dbm_soc1.dts arm: socfpga: gen5: add reset & sdr node to SPL devicetrees 2019-04-17 22:20:16 +02:00
socfpga_cyclone5_de0_nano_soc-u-boot.dtsi arm: socfpga: gen5: add reset & sdr node to SPL devicetrees 2019-04-17 22:20:16 +02:00
socfpga_cyclone5_de0_nano_soc.dts dts: arm: socfpga: merge gen5 devicetrees from linux 2018-11-29 12:45:15 +01:00
socfpga_cyclone5_de1_soc.dts arm: socfpga: gen5: add reset & sdr node to SPL devicetrees 2019-04-17 22:20:16 +02:00
socfpga_cyclone5_de10_nano.dts dts: arm: socfpga: fix socfpga_de10_nano console 2019-04-29 20:33:23 +02:00
socfpga_cyclone5_is1.dts net: phy: micrel: Use correct skew values on KSZ9021 2019-05-08 17:27:01 -05:00
socfpga_cyclone5_mcv.dtsi arm: socfpga: Re-add support for Aries MCV SoM and MCVEV[KP] board 2019-05-14 19:52:39 +02:00
socfpga_cyclone5_mcvevk-u-boot.dtsi arm: socfpga: Re-add support for Aries MCV SoM and MCVEV[KP] board 2019-05-14 19:52:39 +02:00
socfpga_cyclone5_mcvevk.dts arm: socfpga: Re-add support for Aries MCV SoM and MCVEV[KP] board 2019-05-14 19:52:39 +02:00
socfpga_cyclone5_socdk-u-boot.dtsi arm: socfpga: gen5: add reset & sdr node to SPL devicetrees 2019-04-17 22:20:16 +02:00
socfpga_cyclone5_socdk.dts net: phy: micrel: Use correct skew values on KSZ9021 2019-05-08 17:27:01 -05:00
socfpga_cyclone5_sockit-u-boot.dtsi arm: socfpga: gen5: add reset & sdr node to SPL devicetrees 2019-04-17 22:20:16 +02:00
socfpga_cyclone5_sockit.dts net: phy: micrel: Use correct skew values on KSZ9021 2019-05-08 17:27:01 -05:00
socfpga_cyclone5_socrates-u-boot.dtsi arm: socfpga: gen5: add reset & sdr node to SPL devicetrees 2019-04-17 22:20:16 +02:00
socfpga_cyclone5_socrates.dts arm: socfpga: gen5: sync devicetrees to Linux 2019-04-17 22:20:15 +02:00
socfpga_cyclone5_sr1500.dts arm: socfpga: gen5: add reset & sdr node to SPL devicetrees 2019-04-17 22:20:16 +02:00
socfpga_cyclone5_vining_fpga-u-boot.dtsi watchdog: designware: Convert to DM and DT probing 2020-02-05 03:01:57 +01:00
socfpga_cyclone5_vining_fpga.dts ARM: socfpga: vining_fpga: Update DT 2019-10-09 22:54:18 +02:00
socfpga_stratix10.dtsi arm: dts: socfpga: Add u-boot, dm-pre-reloc for sysmgr and clkmgr nodes 2020-01-07 14:38:33 +01:00
socfpga_stratix10_socdk-u-boot.dtsi watchdog: designware: Convert to DM and DT probing 2020-02-05 03:01:57 +01:00
socfpga_stratix10_socdk.dts arm: socfpga: stratix10: Add alias for gmac0 in S10 dts 2019-11-22 03:08:12 +01:00
st-pincfg.h ARM: dts: stm32: DT alignment with kernel v5.4-rc4 2019-11-26 10:11:48 +01:00
ste-ab8500.dtsi arm: dts: Import device tree for ST-Ericsson Ux500 2020-01-22 17:47:57 -05:00
ste-ab8505.dtsi arm: dts: Import device tree for ST-Ericsson Ux500 2020-01-22 17:47:57 -05:00
ste-dbx5x0-u-boot.dtsi arm: Add support for ST-Ericsson U8500 SoC 2020-01-22 17:47:57 -05:00
ste-dbx5x0.dtsi arm: dts: Import device tree for ST-Ericsson Ux500 2020-01-22 17:47:57 -05:00
ste-ux500-samsung-stemmy.dts board: Add new Samsung "stemmy" board based on ST-Ericsson U8500 2020-01-22 17:47:57 -05:00
stih407-clock.dtsi ARM: dts: stih410-b2260: Sync DT with kernel v5.2 2019-08-27 09:36:56 +02:00
stih407-family.dtsi ARM: dts: stih410-b2260: Sync DT with kernel v5.2 2019-08-27 09:36:56 +02:00
stih407-pinctrl.dtsi ARM: dts: stih410-b2260: Sync DT with kernel v5.2 2019-08-27 09:36:56 +02:00
stih410-b2260-u-boot.dtsi ARM: dts: stih410-b2260: Sync DT with kernel v5.2 2019-08-27 09:36:56 +02:00
stih410-b2260.dts ARM: dts: stih410-b2260: Sync DT with kernel v5.2 2019-08-27 09:36:56 +02:00
stih410-clock.dtsi ARM: dts: stih410-b2260: Sync DT with kernel v5.2 2019-08-27 09:36:56 +02:00
stih410-pinctrl.dtsi ARM: dts: stih410-b2260: Sync DT with kernel v5.2 2019-08-27 09:36:56 +02:00
stih410.dtsi ARM: dts: stih410-b2260: Sync DT with kernel v5.2 2019-08-27 09:36:56 +02:00
stm32f4-pinctrl.dtsi ARM: dts: stm32: DT alignment with kernel v5.3 2019-11-26 10:11:48 +01:00
stm32f7-pinctrl.dtsi ARM: dts: stm32: Sync DT with v4.20 kernel for stm32f7 2019-04-23 15:31:06 +02:00
stm32f7-u-boot.dtsi ARM: dts: stm32: Use kernel qspi compatible string for stm32f7-uboot.dtsi 2019-07-22 11:04:52 +02:00
stm32f429-disco-u-boot.dtsi ARM: dts: stm32: Remove useless "st, stm32-gpio" compatible string 2019-07-12 11:50:58 +02:00
stm32f429-disco.dts ARM: dts: stm32: DT alignment with kernel v5.3 2019-11-26 10:11:48 +01:00
stm32f429-pinctrl.dtsi ARM: dts: stm32: DT alignment with kernel v5.3 2019-11-26 10:11:48 +01:00
stm32f429.dtsi ARM: dts: stm32: DT alignment with kernel v5.4-rc4 2019-11-26 10:11:48 +01:00
stm32f469-disco-u-boot.dtsi ARM: dts: stm32: Use kernel qspi compatible string for stm32f469-disco-uboot.dtsi 2019-07-22 11:04:52 +02:00
stm32f469-disco.dts ARM: dts: stm32: DT alignment with kernel v5.3 2019-11-26 10:11:48 +01:00
stm32f469-pinctrl.dtsi ARM: dts: stm32: DT alignment with kernel v5.3 2019-11-26 10:11:48 +01:00
stm32f469.dtsi ARM: dts: stm32: DT alignment with kernel v5.3 2019-11-26 10:11:48 +01:00
stm32f746-disco-u-boot.dtsi ARM: dts: stm32: Remove useless u-boot, dm-pre-reloc in stm32f746-disco-u-boot.dtsi 2019-06-28 09:45:07 +02:00
stm32f746-disco.dts ARM: dts: stm32: DT alignment with kernel v5.3 2019-11-26 10:11:48 +01:00
stm32f746-pinctrl.dtsi ARM: dts: stm32: Sync DT with v4.20 kernel for stm32f7 2019-04-23 15:31:06 +02:00
stm32f746.dtsi ARM: dts: stm32: DT alignment with kernel v5.4-rc4 2019-11-26 10:11:48 +01:00
stm32f769-disco-u-boot.dtsi ARM: dts: stm32f769: add display for STM32F769 disco board 2019-10-13 23:39:01 +02:00
stm32f769-disco.dts ARM: dts: stm32: DT alignment with kernel v5.3 2019-11-26 10:11:48 +01:00
stm32f769-pinctrl.dtsi ARM: dts: stm32: Sync DT with v4.20 kernel for stm32f7 2019-04-23 15:31:06 +02:00
stm32h7-u-boot.dtsi ARM: dts: stm32: DT alignment with kernel v5.3 2019-11-26 10:11:48 +01:00
stm32h743-pinctrl.dtsi ARM: dts: stm32: DT alignment with kernel v5.3 2019-11-26 10:11:48 +01:00
stm32h743.dtsi ARM: dts: stm32: DT alignment with kernel v5.3 2019-11-26 10:11:48 +01:00
stm32h743i-disco-u-boot.dtsi ARM: dts: stm32: DT alignment with kernel v5.3 2019-11-26 10:11:48 +01:00
stm32h743i-disco.dts ARM: dts: stm32: DT alignment with kernel v5.3 2019-11-26 10:11:48 +01:00
stm32h743i-eval-u-boot.dtsi ARM: dts: stm32: DT alignment with kernel v5.3 2019-11-26 10:11:48 +01:00
stm32h743i-eval.dts ARM: dts: stm32: DT alignment with kernel v5.4-rc4 2019-11-26 10:11:48 +01:00
stm32mp15-ddr.dtsi ARM: dts: stm32mp1: correct ddr node 2020-02-13 17:26:23 +01:00
stm32mp15-ddr3-1x4Gb-1066-binG.dtsi ARM: dts: stm32mp1: DDR config v1.45 2019-08-27 09:36:56 +02:00
stm32mp15-ddr3-2x4Gb-1066-binG.dtsi ARM: dts: stm32mp1: DDR config v1.45 2019-08-27 09:36:56 +02:00
stm32mp15xx-dhcom-pdk2-u-boot.dtsi ARM: dts: stm32: Add DH Electronics DHCOM SoM and PDK2 board 2020-02-12 19:48:39 +01:00
stm32mp15xx-dhcom-pdk2.dts ARM: dts: stm32: Add DH Electronics DHCOM SoM and PDK2 board 2020-02-12 19:48:39 +01:00
stm32mp15xx-dhcom-u-boot.dtsi ARM: dts: stm32m1: add reg for pll nodes 2020-02-13 17:26:23 +01:00
stm32mp15xx-dhcom.dtsi ARM: dts: stm32: Use DT alias for the configuration EEPROM 2020-04-01 11:58:00 +02:00
stm32mp157-pinctrl.dtsi ARM: dts: stm32: Add alternate pinmux for ethernet RGMII 2020-04-01 11:58:00 +02:00
stm32mp157-u-boot.dtsi ARM: dts: stm32m1: add reg for pll nodes 2020-02-13 17:26:23 +01:00
stm32mp157a-avenger96-u-boot.dtsi ARM: dts: stm32: Repair SDMMC2 operation 2020-04-01 10:12:44 +02:00
stm32mp157a-avenger96.dts ARM: dts: stm32: Repair PMIC configuration on AV96 2020-04-01 11:58:00 +02:00
stm32mp157a-dk1-u-boot.dtsi ARM: dts: stm32m1: add reg for pll nodes 2020-02-13 17:26:23 +01:00
stm32mp157a-dk1.dts ARM: dts: stm32mp1: DT alignment with kernel v5.5-rc7 2020-02-13 17:26:22 +01:00
stm32mp157c-dk2-u-boot.dtsi video: stm32: remove the compatible "synopsys, dw-mipi-dsi" support 2019-11-12 16:15:53 +01:00
stm32mp157c-dk2.dts ARM: dts: stm32mp1: DT alignment with kernel v5.5-rc7 2020-02-13 17:26:22 +01:00
stm32mp157c-ed1-u-boot.dtsi ARM: dts: stm32m1: add reg for pll nodes 2020-02-13 17:26:23 +01:00
stm32mp157c-ed1.dts ARM: dts: stm32mp1: DT alignment with kernel v5.5-rc7 2020-02-13 17:26:22 +01:00
stm32mp157c-ev1-u-boot.dtsi video: stm32: remove the compatible "synopsys, dw-mipi-dsi" support 2019-11-12 16:15:53 +01:00
stm32mp157c-ev1.dts ARM: dts: stm32mp1: DT alignment with kernel v5.5-rc7 2020-02-13 17:26:22 +01:00
stm32mp157c.dtsi stm32mp1: pwr: use the last binding for pwr 2020-02-13 17:26:22 +01:00
stm32mp157xaa-pinctrl.dtsi ARM: dts: stm32mp1: sync device tree with v5.3-rc2 2019-08-27 09:36:56 +02:00
stm32mp157xab-pinctrl.dtsi ARM: dts: stm32mp1: sync device tree with v5.3-rc2 2019-08-27 09:36:56 +02:00
stm32mp157xac-pinctrl.dtsi ARM: dts: stm32mp1: sync device tree with v5.3-rc2 2019-08-27 09:36:56 +02:00
stm32mp157xad-pinctrl.dtsi ARM: dts: stm32mp1: sync device tree with v5.3-rc2 2019-08-27 09:36:56 +02:00
stm32429i-eval-u-boot.dtsi ARM: dts: stm32: Remove useless "st, stm32-gpio" compatible string 2019-07-12 11:50:58 +02:00
stm32429i-eval.dts ARM: dts: stm32: DT alignment with kernel v5.4-rc4 2019-11-26 10:11:48 +01:00
stm32746g-eval-u-boot.dtsi ARM: dts: stm32: Set spi-rx/tx-bus-width to 4 for stm32f746-eval 2019-05-06 09:50:27 +02:00
stm32746g-eval.dts ARM: dts: stm32: DT alignment with kernel v5.3 2019-11-26 10:11:48 +01:00
stv0991.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
sun4i-a10-a1000.dts ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun4i-a10-ba10-tvbox.dts ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun4i-a10-chuwi-v7-cw0825.dts ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun4i-a10-cubieboard.dts ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun4i-a10-dserve-dsrv9703c.dts ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun4i-a10-gemei-g9.dts ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun4i-a10-hackberry.dts ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun4i-a10-hyundai-a7hd.dts ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun4i-a10-inet-3f.dts ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun4i-a10-inet-3w.dts ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun4i-a10-inet1.dts ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun4i-a10-inet9f-rev03.dts ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun4i-a10-inet97fv2.dts ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun4i-a10-itead-iteaduino-plus.dts ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun4i-a10-jesurun-q5.dts ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun4i-a10-marsboard.dts ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun4i-a10-mini-xplus.dts ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun4i-a10-mk802.dts ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun4i-a10-mk802ii.dts ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun4i-a10-olinuxino-lime.dts ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun4i-a10-pcduino.dts ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun4i-a10-pcduino2.dts ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun4i-a10-pov-protab2-ips9.dts ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun4i-a10.dtsi ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun5i-a10s-auxtek-t003.dts ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun5i-a10s-auxtek-t004.dts ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun5i-a10s-mk802.dts ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun5i-a10s-olinuxino-micro.dts ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun5i-a10s-r7-tv-dongle.dts ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun5i-a10s-wobo-i5.dts ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun5i-a10s.dtsi ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun5i-a13-ampe-a76.dts SPDX: Convert all of our multiple license tags to Linux Kernel style 2018-05-07 10:24:31 -04:00
sun5i-a13-difrnce-dit4350.dts sunxi: Sync dts files with upstream kernel 2016-08-26 16:58:36 +02:00
sun5i-a13-empire-electronix-d709.dts ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun5i-a13-empire-electronix-m712.dts sun5i: Add defconfig and dts file for the Empire Electronix M712 tablet 2016-08-26 16:58:36 +02:00
sun5i-a13-hsg-h702.dts ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun5i-a13-inet-86vs.dts SPDX: Convert all of our multiple license tags to Linux Kernel style 2018-05-07 10:24:31 -04:00
sun5i-a13-inet-98v-rev2.dts ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun5i-a13-olinuxino-micro.dts ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun5i-a13-olinuxino.dts ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun5i-a13-q8-tablet.dts sunxi: Sync dts files with upstream kernel 2016-08-26 16:58:36 +02:00
sun5i-a13-utoo-p66.dts ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun5i-a13.dtsi ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun5i-gr8-chip-pro.dts ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun5i-gr8.dtsi ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun5i-q8-common.dtsi sunxi: Sync dts files with the upstream kernel 2016-03-23 22:04:13 +01:00
sun5i-r8-chip.dts ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun5i-r8.dtsi ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun5i-reference-design-tablet.dtsi ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun5i.dtsi ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun6i-a31-app4-evb1.dts ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun6i-a31-colombus.dts ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun6i-a31-hummingbird.dts ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun6i-a31-i7.dts ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun6i-a31-m9.dts ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun6i-a31-mele-a1000g-quad.dts ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun6i-a31-mixtile-loftq.dts SPDX: Convert all of our multiple license tags to Linux Kernel style 2018-05-07 10:24:31 -04:00
sun6i-a31.dtsi ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun6i-a31s-colorfly-e708-q1.dts sunxi: Sync dts files with upstream kernel 2016-08-26 16:58:36 +02:00
sun6i-a31s-cs908.dts ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun6i-a31s-inet-q972.dts sun6i: Add defconfig and dts file for tablets using the inet-q972 PCB 2016-08-26 16:58:36 +02:00
sun6i-a31s-primo81.dts ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun6i-a31s-sina31s-core.dtsi ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun6i-a31s-sina31s.dts ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun6i-a31s-sinovoip-bpi-m2.dts ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun6i-a31s-yones-toptech-bs1078-v2.dts ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun6i-a31s.dtsi ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun6i-reference-design-tablet.dtsi ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun7i-a20-ainol-aw1.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-bananapi-m1-plus.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-bananapi.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-bananapro.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-cubieboard2.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-cubietruck.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-hummingbird.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-i12-tvbox.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-icnova-swac.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-itead-ibox.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-lamobo-r1.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-m3.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-m5.dts ARM: dts: a20-m5: Enable AHCI 2019-04-17 14:34:45 +05:30
sun7i-a20-mk808c.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-olimex-som-evb-emmc.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-olimex-som-evb.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-olimex-som204-evb-emmc.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-olimex-som204-evb.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-olinuxino-lime.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-olinuxino-lime2-emmc.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-olinuxino-lime2.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-olinuxino-micro-emmc.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-olinuxino-micro.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-orangepi-mini.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-orangepi.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-pcduino3-nano.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-pcduino3.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-primo73.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-wexler-tab7200.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-wits-pro-a20-dkt-u-boot.dtsi ARM: dts: a20-wits-pro-a20-dkt: Enable AHCI 2019-04-17 14:34:45 +05:30
sun7i-a20-wits-pro-a20-dkt.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-yones-toptech-bd1078.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20.dtsi arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun8i-a23-a33.dtsi ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun8i-a23-evb.dts ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun8i-a23-gt90h-v4.dts ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun8i-a23-inet86dz.dts ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun8i-a23-polaroid-mid2407pxe03.dts ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun8i-a23-polaroid-mid2809pxe04.dts ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun8i-a23-q8-tablet.dts ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun8i-a23.dtsi ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun8i-a33-ga10h-v1.1.dts ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun8i-a33-inet-d978-rev2.dts ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun8i-a33-olinuxino.dts ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun8i-a33-q8-tablet.dts sunxi: Sync dts files with upstream kernel 2016-08-26 16:58:36 +02:00
sun8i-a33-sinlinx-sina33.dts ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun8i-a33.dtsi ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun8i-a83t-allwinner-h8homlet-v2.dts ARM: dts: sun8i: Update A83T dts(i) files from Linux-v4.18-rc3 2018-08-13 13:07:35 +05:30
sun8i-a83t-bananapi-m3.dts ARM: dts: sun8i: Update A83T dts(i) files from Linux-v4.18-rc3 2018-08-13 13:07:35 +05:30
sun8i-a83t-cubietruck-plus.dts ARM: dts: sun8i: Update A83T dts(i) files from Linux-v4.18-rc3 2018-08-13 13:07:35 +05:30
sun8i-a83t-tbs-a711.dts ARM: dts: sun8i: Update A83T dts(i) files from Linux-v4.18-rc3 2018-08-13 13:07:35 +05:30
sun8i-a83t.dtsi ARM: dts: sun8i: Update A83T dts(i) files from Linux-v4.18-rc3 2018-08-13 13:07:35 +05:30
sun8i-h2-plus-bananapi-m2-zero.dts sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108 2020-01-24 23:06:49 +05:30
sun8i-h2-plus-libretech-all-h3-cc.dts sunxi: Add Libre Computer Board ALL-H3-CC H2+ ver. 2018-05-01 10:15:58 +05:30
sun8i-h2-plus-orangepi-r1.dts sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108 2020-01-24 23:06:49 +05:30
sun8i-h2-plus-orangepi-zero.dts sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108 2020-01-24 23:06:49 +05:30
sun8i-h3-bananapi-m2-plus-v1.2.dts sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108 2020-01-24 23:06:49 +05:30
sun8i-h3-bananapi-m2-plus.dts sunxi: Sync Bananapi M2+ device tree from Linux v5.0-rc1 2019-02-18 13:54:23 +05:30
sun8i-h3-beelink-x2.dts sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108 2020-01-24 23:06:49 +05:30
sun8i-h3-emlid-neutis-n5h3-devboard.dts sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108 2020-01-24 23:06:49 +05:30
sun8i-h3-emlid-neutis-n5h3.dtsi sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108 2020-01-24 23:06:49 +05:30
sun8i-h3-libretech-all-h3-cc.dts sunxi: DT: H3: update board .dts files from Linux 2018-07-16 12:03:16 +05:30
sun8i-h3-mapleboard-mp130.dts sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108 2020-01-24 23:06:49 +05:30
sun8i-h3-nanopi-duo2.dts sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108 2020-01-24 23:06:49 +05:30
sun8i-h3-nanopi-m1-plus.dts sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108 2020-01-24 23:06:49 +05:30
sun8i-h3-nanopi-m1.dts sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108 2020-01-24 23:06:49 +05:30
sun8i-h3-nanopi-neo-air.dts sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108 2020-01-24 23:06:49 +05:30
sun8i-h3-nanopi-neo.dts sunxi: DT: H3: update board .dts files from Linux 2018-07-16 12:03:16 +05:30
sun8i-h3-nanopi.dtsi sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108 2020-01-24 23:06:49 +05:30
sun8i-h3-orangepi-2.dts sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108 2020-01-24 23:06:49 +05:30
sun8i-h3-orangepi-lite.dts sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108 2020-01-24 23:06:49 +05:30
sun8i-h3-orangepi-one.dts sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108 2020-01-24 23:06:49 +05:30
sun8i-h3-orangepi-pc-plus.dts sunxi: DT: H3: update board .dts files from Linux 2018-07-16 12:03:16 +05:30
sun8i-h3-orangepi-pc.dts sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108 2020-01-24 23:06:49 +05:30
sun8i-h3-orangepi-plus.dts sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108 2020-01-24 23:06:49 +05:30
sun8i-h3-orangepi-plus2e.dts sunxi: DT: H3: update board .dts files from Linux 2018-07-16 12:03:16 +05:30
sun8i-h3-orangepi-zero-plus2.dts sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108 2020-01-24 23:06:49 +05:30
sun8i-h3-rervision-dvk.dts sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108 2020-01-24 23:06:49 +05:30
sun8i-h3.dtsi sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108 2020-01-24 23:06:49 +05:30
sun8i-q8-common.dtsi ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun8i-r16-bananapi-m2m.dts ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun8i-r16-nintendo-nes-classic-edition.dts ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun8i-r16-parrot.dts ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun8i-r40-bananapi-m2-ultra.dts arm: allwinner: r40: Sync R40 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun8i-r40.dtsi arm: allwinner: r40: Sync R40 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun8i-reference-design-tablet.dtsi ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun8i-v3s-licheepi-zero.dts sunxi: add support for Lichee Pi Zero 2017-04-21 09:29:35 +02:00
sun8i-v3s.dtsi sunxi: add DTSI file for V3s 2017-04-21 09:23:27 +02:00
sun8i-v40-bananapi-m2-berry.dts sunxi: dts: R40: Update Bananapi M2 Berry .dts 2020-01-24 23:06:50 +05:30
sun9i-a80-cubieboard4.dts ARM: dts: sun8i: Update A80 dts(i) from Linux-v4.18-rc3 2019-01-18 22:19:09 +05:30
sun9i-a80-cx-a99.dts ARM: dts: sun8i: Update A80 dts(i) from Linux-v4.18-rc3 2019-01-18 22:19:09 +05:30
sun9i-a80-optimus.dts ARM: dts: sun8i: Update A80 dts(i) from Linux-v4.18-rc3 2019-01-18 22:19:09 +05:30
sun9i-a80.dtsi ARM: dts: sun8i: Update A80 dts(i) from Linux-v4.18-rc3 2019-01-18 22:19:09 +05:30
sun50i-a64-amarula-relic.dts sunxi: A64: Update .dts/.dtsi files 2018-11-13 22:06:08 +05:30
sun50i-a64-bananapi-m64.dts sunxi: A64: Update .dts/.dtsi files 2018-11-13 22:06:08 +05:30
sun50i-a64-nanopi-a64.dts sunxi: A64: Update .dts/.dtsi files 2018-11-13 22:06:08 +05:30
sun50i-a64-oceanic-5205-5inmfd.dts sun50i: a64: Add Oceanic 5205 5inMFD initial support 2019-04-10 15:25:38 +05:30
sun50i-a64-olinuxino-emmc.dts arm64: dts: sun50i: Add support for A64 OLinuXino (with eMMC) 2019-10-25 14:15:49 +05:30
sun50i-a64-olinuxino.dts sunxi: A64: Update .dts/.dtsi files 2018-11-13 22:06:08 +05:30
sun50i-a64-orangepi-win.dts sunxi: A64: Update .dts/.dtsi files 2018-11-13 22:06:08 +05:30
sun50i-a64-pine64-lts.dts sunxi: A64: Add Pine64-LTS board 2018-11-13 22:06:08 +05:30
sun50i-a64-pine64-plus.dts sunxi: DT: A64: update board .dts files from Linux 2018-07-16 12:02:41 +05:30
sun50i-a64-pine64.dts sunxi: A64: Update .dts/.dtsi files 2018-11-13 22:06:08 +05:30
sun50i-a64-pinebook-u-boot.dtsi sunxi: A64: pinebook-u-boot: Include sunxi-u-boot.dtsi 2019-01-30 18:22:18 +05:30
sun50i-a64-pinebook.dts sunxi: DT: add support for Pinebook 2018-11-13 22:10:03 +05:30
sun50i-a64-sopine-baseboard-u-boot.dtsi configs: sopine-baseboard: Enable SPI-FLASH 2019-10-25 00:48:31 +05:30
sun50i-a64-sopine-baseboard.dts sunxi: A64: Update .dts/.dtsi files 2018-11-13 22:06:08 +05:30
sun50i-a64-sopine.dtsi sunxi: A64: Update .dts/.dtsi files 2018-11-13 22:06:08 +05:30
sun50i-a64-teres-i-u-boot.dtsi sun50i: a64: Add Olimex A64-Teres-I board initial support 2019-05-09 00:44:13 +05:30
sun50i-a64-teres-i.dts sun50i: a64: Add Olimex A64-Teres-I board initial support 2019-05-09 00:44:13 +05:30
sun50i-a64.dtsi sunxi: A64: Re-add syscon to DT node 2018-11-13 22:06:08 +05:30
sun50i-h5-bananapi-m2-plus-v1.2.dts sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108 2020-01-24 23:06:49 +05:30
sun50i-h5-bananapi-m2-plus.dts sunxi: Add Bananapi M2+ H5 board 2019-02-18 14:46:53 +05:30
sun50i-h5-emlid-neutis-n5-devboard.dts sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108 2020-01-24 23:06:49 +05:30
sun50i-h5-emlid-neutis-n5.dtsi sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108 2020-01-24 23:06:49 +05:30
sun50i-h5-libretech-all-h3-cc.dts sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108 2020-01-24 23:06:49 +05:30
sun50i-h5-libretech-all-h3-it.dts sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108 2020-01-24 23:06:49 +05:30
sun50i-h5-libretech-all-h5-cc.dts sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108 2020-01-24 23:06:49 +05:30
sun50i-h5-nanopi-neo-plus2.dts sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108 2020-01-24 23:06:49 +05:30
sun50i-h5-nanopi-neo2.dts sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108 2020-01-24 23:06:49 +05:30
sun50i-h5-orangepi-pc2.dts sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108 2020-01-24 23:06:49 +05:30
sun50i-h5-orangepi-prime.dts sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108 2020-01-24 23:06:49 +05:30
sun50i-h5-orangepi-zero-plus.dts sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108 2020-01-24 23:06:49 +05:30
sun50i-h5-orangepi-zero-plus2.dts sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108 2020-01-24 23:06:49 +05:30
sun50i-h5.dtsi sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108 2020-01-24 23:06:49 +05:30
sun50i-h6-beelink-gs1.dts arm: dts: sync dts for Allwinner H6 2019-10-25 14:40:25 +05:30
sun50i-h6-orangepi-lite2.dts board: allwinner: sun50i-h6: Add Orangepi Lite2 support 2018-11-13 22:13:09 +05:30
sun50i-h6-orangepi-one-plus.dts arm64: allwinner: h6: Add common orangepi nodes into dtsi 2018-11-13 22:13:01 +05:30
sun50i-h6-orangepi.dtsi arm64: allwinner: sun50i: Sync H6 dts(i) files from Linux 2019-04-14 22:32:32 +05:30
sun50i-h6-pine-h64.dts arm: dts: sync dts for Allwinner H6 2019-10-25 14:40:25 +05:30
sun50i-h6.dtsi arm: dts: sync dts for Allwinner H6 2019-10-25 14:40:25 +05:30
sunxi-bananapi-m2-plus-v1.2.dtsi sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108 2020-01-24 23:06:49 +05:30
sunxi-bananapi-m2-plus.dtsi sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108 2020-01-24 23:06:49 +05:30
sunxi-common-regulators.dtsi
sunxi-h3-h5-emlid-neutis.dtsi sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108 2020-01-24 23:06:49 +05:30
sunxi-h3-h5.dtsi sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108 2020-01-24 23:06:49 +05:30
sunxi-itead-core-common.dtsi arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sunxi-libretech-all-h3-cc.dtsi sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108 2020-01-24 23:06:49 +05:30
sunxi-libretech-all-h3-it.dtsi sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108 2020-01-24 23:06:49 +05:30
sunxi-q8-common.dtsi sunxi: Sync dts files with the upstream kernel 2016-03-23 22:04:13 +01:00
sunxi-reference-design-tablet.dtsi sunxi: Sync dts files with upstream kernel 2016-08-26 16:58:36 +02:00
sunxi-u-boot.dtsi arm: dts: sunxi: Alter mmc2 auto-numbering to mmc1 2019-01-30 18:22:18 +05:30
tegra-u-boot.dtsi binman: Rename 'position' to 'offset' 2018-08-01 16:30:06 -06:00
tegra20-colibri.dts apalis_t30/tk1, colibri_t20/t30: fix i2c bus frequencies 2017-08-15 14:51:18 -07:00
tegra20-harmony.dts ARM: tegra: Rename pcie-controller to pcie 2019-06-05 09:16:35 -07:00
tegra20-medcom-wide.dts mmc: tegra: use correct alias for SDHCI/MMC nodes 2016-09-27 09:11:01 -07:00
tegra20-paz00.dts ARM: dts: tegra: Sync paz00 with Linux 4.8 2017-01-03 10:34:13 -07:00
tegra20-plutux.dts mmc: tegra: use correct alias for SDHCI/MMC nodes 2016-09-27 09:11:01 -07:00
tegra20-seaboard.dts ARM: tegra: fix ULPI PHY on Ventana and Seaboard 2016-09-27 09:11:03 -07:00
tegra20-tamonten.dtsi tegra: dts: Sync tegra20.dtsi with Linux v4.4 2016-02-16 09:17:51 -07:00
tegra20-tec.dts mmc: tegra: use correct alias for SDHCI/MMC nodes 2016-09-27 09:11:01 -07:00
tegra20-trimslice.dts ARM: tegra: Rename pcie-controller to pcie 2019-06-05 09:16:35 -07:00
tegra20-u-boot.dtsi arm: tegra: Restore host1x/dc dm-pre-reloc properties 2018-08-21 08:34:55 -07:00
tegra20-ventana.dts ARM: tegra: fix USB controller aliases 2016-09-27 09:11:03 -07:00
tegra20.dtsi ARM: tegra: Rename pcie-controller to pcie 2019-06-05 09:16:35 -07:00
tegra30-apalis.dts ARM: tegra: Rename pcie-controller to pcie 2019-06-05 09:16:35 -07:00
tegra30-beaver.dts ARM: tegra: Rename pcie-controller to pcie 2019-06-05 09:16:35 -07:00
tegra30-cardhu.dts ARM: tegra: Rename pcie-controller to pcie 2019-06-05 09:16:35 -07:00
tegra30-colibri.dts apalis_t30/tk1, colibri_t20/t30: fix i2c bus frequencies 2017-08-15 14:51:18 -07:00
tegra30-tamonten.dtsi ARM: tegra: pull Tegra30 SoC DT from Linux v4.7 2016-09-27 09:11:02 -07:00
tegra30-tec-ng.dts tegra: fdt: Ensure that the console UART is enabled 2017-07-11 10:08:20 -06:00
tegra30-u-boot.dtsi binman: tegra: Convert to use binman 2017-12-12 19:53:45 -07:00
tegra30.dtsi ARM: tegra: Rename pcie-controller to pcie 2019-06-05 09:16:35 -07:00
tegra114-dalmore.dts tegra: fdt: Ensure that the console UART is enabled 2017-07-11 10:08:20 -06:00
tegra114-u-boot.dtsi binman: tegra: Convert to use binman 2017-12-12 19:53:45 -07:00
tegra114.dtsi ARM: tegra: pull Tegra114 SoC DT from Linux v4.7 2016-09-27 09:11:02 -07:00
tegra124-apalis.dts apalis-tk1: support v1.2 hardware revision 2019-08-09 10:01:35 -07:00
tegra124-cei-tk1-som.dts ARM: tegra: Rename pcie-controller to pcie 2019-06-05 09:16:35 -07:00
tegra124-jetson-tk1.dts ARM: tegra: Rename pcie-controller to pcie 2019-06-05 09:16:35 -07:00
tegra124-nyan-big-u-boot.dtsi nyan-big: change spi delay 2019-02-20 09:01:44 -07:00
tegra124-nyan-big.dts tegra: dts: Move stdout-path to /chosen 2017-07-28 12:02:47 -06:00
tegra124-nyan.dtsi ARM: tegra: enable ums on nyan boards 2019-02-20 09:01:44 -07:00
tegra124-u-boot.dtsi binman: tegra: Convert to use binman 2017-12-12 19:53:45 -07:00
tegra124-venice2.dts tegra: fdt: Ensure that the console UART is enabled 2017-07-11 10:08:20 -06:00
tegra124.dtsi ARM: tegra: Rename pcie-controller to pcie 2019-06-05 09:16:35 -07:00
tegra186-p2771-0000-000.dts ARM: tegra: Rename pcie-controller to pcie 2019-06-05 09:16:35 -07:00
tegra186-p2771-0000-500.dts ARM: tegra: Rename pcie-controller to pcie 2019-06-05 09:16:35 -07:00
tegra186-p2771-0000.dtsi ARM: tegra: Mark built-in Ethernet as default on Jetson TX2 2019-06-05 09:16:35 -07:00
tegra186-u-boot.dtsi tegra: fdt: Add tegra186-u-boot.dtsi 2020-01-14 10:35:19 -07:00
tegra186.dtsi ARM: tegra: Rename pcie-controller to pcie 2019-06-05 09:16:35 -07:00
tegra210-e2220-1170.dts tegra: fdt: Ensure that the console UART is enabled 2017-07-11 10:08:20 -06:00
tegra210-p2371-0000.dts tegra: fdt: Ensure that the console UART is enabled 2017-07-11 10:08:20 -06:00
tegra210-p2371-2180.dts ARM: tegra: p2371-2180: add I2C nodes to DT 2020-04-02 14:30:01 -07:00
tegra210-p2571.dts tegra: fdt: Ensure that the console UART is enabled 2017-07-11 10:08:20 -06:00
tegra210-p3450-0000.dts ARM: tegra: Add NVIDIA Jetson Nano Developer Kit support 2020-04-02 14:30:02 -07:00
tegra210-u-boot.dtsi binman: tegra: Convert to use binman 2017-12-12 19:53:45 -07:00
tegra210.dtsi ARM: tegra: Rename pcie-controller to pcie 2019-06-05 09:16:35 -07:00
thunderx-88xx.dts SPDX: Convert all of our multiple license tags to Linux Kernel style 2018-05-07 10:24:31 -04:00
thunderx-88xx.dtsi SPDX: Convert all of our multiple license tags to Linux Kernel style 2018-05-07 10:24:31 -04:00
tps6507x.dtsi arm: dts: da850: Migrate da850-evm DTS files from Linux 4.13-RC5 2017-09-29 10:52:20 -04:00
tps65217.dtsi
tps65910.dtsi
twl4030.dtsi omap3: Copy twl4030 device tree from Linux 4.9.y stable 2017-05-09 20:35:36 -04:00
twl4030_omap3.dtsi omap3: Copy twl4030 device tree from Linux 4.9.y stable 2017-05-09 20:35:36 -04:00
ulcb.dtsi ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.0 2019-04-09 18:19:10 +02:00
uniphier-ld4-ref.dts ARM: dts: uniphier: sync DT with Linux 4.17-rc1 2018-04-18 23:34:36 +09:00
uniphier-ld4.dtsi ARM: dts: uniphier: add reset-names to NAND controller node 2020-02-29 14:11:36 +09:00
uniphier-ld6b-ref.dts ARM: dts: uniphier: sync DT with Linux 4.17-rc1 2018-04-18 23:34:36 +09:00
uniphier-ld6b.dtsi ARM: dts: uniphier: sync DT with Linux 4.17-rc1 2018-04-18 23:34:36 +09:00
uniphier-ld11-global.dts ARM: dts: uniphier: remove U-Boot own EEPROM compatible and property 2020-02-29 14:12:51 +09:00
uniphier-ld11-ref.dts ARM: dts: uniphier: sync DT with Linux 4.17-rc1 2018-04-18 23:34:36 +09:00
uniphier-ld11.dtsi ARM: dts: uniphier: add reset-names to NAND controller node 2020-02-29 14:11:36 +09:00
uniphier-ld20-global.dts ARM: uniphier: dts: sync with Linux 4.20 2018-12-29 11:50:30 +09:00
uniphier-ld20-ref.dts ARM: uniphier: dts: sync with Linux 4.20 2018-12-29 11:50:30 +09:00
uniphier-ld20.dtsi ARM: dts: uniphier: add reset-names to NAND controller node 2020-02-29 14:11:36 +09:00
uniphier-pinctrl.dtsi ARM: dts: uniphier: add pinmux nodes for I2C ch5, ch6 2020-01-09 01:57:05 +09:00
uniphier-pro4-ace.dts ARM: dts: uniphier: remove U-Boot own EEPROM compatible and property 2020-02-29 14:12:51 +09:00
uniphier-pro4-ref.dts mmc: uniphier-sd: sync with Linux 2018-09-11 20:37:18 +09:00
uniphier-pro4-sanji.dts ARM: dts: uniphier: remove U-Boot own EEPROM compatible and property 2020-02-29 14:12:51 +09:00
uniphier-pro4.dtsi ARM: dts: uniphier: add reset-names to NAND controller node 2020-02-29 14:11:36 +09:00
uniphier-pro5-4kbox.dts SPDX: Convert all of our multiple license tags to Linux Kernel style 2018-05-07 10:24:31 -04:00
uniphier-pro5.dtsi ARM: dts: uniphier: add reset-names to NAND controller node 2020-02-29 14:11:36 +09:00
uniphier-pxs2-gentil.dts ARM: dts: uniphier: remove U-Boot own EEPROM compatible and property 2020-02-29 14:12:51 +09:00
uniphier-pxs2-vodka.dts ARM: dts: uniphier: sync DT with Linux 4.17-rc1 2018-04-18 23:34:36 +09:00
uniphier-pxs2.dtsi ARM: dts: uniphier: add reset-names to NAND controller node 2020-02-29 14:11:36 +09:00
uniphier-pxs3-ref.dts ARM: dts: uniphier: sync with Linux 5.1-rc4 2019-04-17 07:22:23 +09:00
uniphier-pxs3.dtsi ARM: dts: uniphier: add reset-names to NAND controller node 2020-02-29 14:11:36 +09:00
uniphier-ref-daughter.dtsi ARM: dts: uniphier: remove U-Boot own EEPROM compatible and property 2020-02-29 14:12:51 +09:00
uniphier-sld8-ref.dts ARM: dts: uniphier: sync DT with Linux 4.17-rc1 2018-04-18 23:34:36 +09:00
uniphier-sld8.dtsi ARM: dts: uniphier: add reset-names to NAND controller node 2020-02-29 14:11:36 +09:00
uniphier-support-card.dtsi ARM: dts: uniphier: sync DT with Linux 4.17-rc1 2018-04-18 23:34:36 +09:00
uniphier-v7-u-boot.dtsi ARM: dts: uniphier: drop u-boot, dm-pre-reloc from SD/eMMC clock node 2018-04-24 00:35:34 +09:00
usb_a9263.dts at91: fix devicetree warnings 2018-09-10 20:48:18 -04:00
versal-mini-emmc0.dts arm64: versal: Add mini eMMC configuration 2019-02-14 14:31:09 +01:00
versal-mini-emmc1.dts arm64: versal: Fix sdhci node address for versal-mini-emmc1 2019-10-24 13:37:02 +02:00
versal-mini.dts arm64: versal: Add mini configuration for Versal 2019-02-14 14:31:10 +01:00
vexpress-v2m-rs1.dtsi arm: dts: add missing vexpress device trees 2019-04-26 18:58:22 -04:00
vexpress-v2m.dtsi arm: dts: add missing vexpress device trees 2019-04-26 18:58:22 -04:00
vexpress-v2p-ca5s.dts arm: dts: add missing vexpress device trees 2019-04-26 18:58:22 -04:00
vexpress-v2p-ca9.dts arm: dts: add missing vexpress device trees 2019-04-26 18:58:22 -04:00
vexpress-v2p-ca15_a7.dts arm: dts: add missing vexpress device trees 2019-04-26 18:58:22 -04:00
vf-colibri-u-boot.dtsi ARM: dts: colibri_vf: Add dcu0 node 2019-07-29 00:09:19 +02:00
vf-colibri.dtsi ARM: dts: colibri_vf: Add dcu0 node 2019-07-29 00:09:19 +02:00
vf.dtsi ARM: dts: colibri_vf: Add dcu0 node 2019-07-29 00:09:19 +02:00
vf500-colibri.dts ARM: dts: colibri_vf: update device trees 2019-04-13 20:30:09 +02:00
vf610-bk4r1-u-boot.dtsi ARM: DTS: Provide vf610-bk4r1-u-boot.dtsi for U-Boot specific properties 2019-04-13 20:30:08 +02:00
vf610-bk4r1.dts ARM: DTS: Update pcm052 based dts files (bk4r1/pcm052) 2019-04-13 20:30:08 +02:00
vf610-colibri.dts ARM: dts: colibri_vf: update device trees 2019-04-13 20:30:09 +02:00
vf610-pcm052.dts ARM: DTS: Update pcm052 based dts files (bk4r1/pcm052) 2019-04-13 20:30:08 +02:00
vf610-pcm052.dtsi ARM: DTS: Update pcm052 based dts files (bk4r1/pcm052) 2019-04-13 20:30:08 +02:00
vf610-pinfunc.h vybrid: ddr: Extend vf610-pinfunc.h with DDR pads definitions 2019-04-13 20:30:08 +02:00
vf610-twr.dts SPDX: Convert all of our multiple license tags to Linux Kernel style 2018-05-07 10:24:31 -04:00
zynq-7000.dtsi ARM: dts: zynq: enablement of coresight topology 2020-01-14 09:05:56 +01:00
zynq-cc108.dts ARM: dts: zynq: correct and improve the model property of dt files 2019-02-15 15:04:00 +01:00
zynq-cse-nand.dts arm: zynq: Fix indentation for zynq-cse targets 2018-08-06 08:44:35 +02:00
zynq-cse-nor.dts arm: zynq: Fix indentation for zynq-cse targets 2018-08-06 08:44:35 +02:00
zynq-cse-qspi-single.dts ARM: zynq: Align model name with DT 2019-10-08 09:41:27 +02:00
zynq-cse-qspi.dtsi arm: zynq: cse_qspi: Fix overwriting spi-rx-bus-width property 2018-11-26 10:50:54 +01:00
zynq-dlc20-rev1.0.dts arm: zynq: Add support for DLC20 board 2018-10-16 14:58:45 +02:00
zynq-microzed.dts ARM: dts: zynq: Set correct manufacturer for ZedBoard and MicroZed boards 2019-02-15 15:04:00 +01:00
zynq-minized.dts arm: zynq: Add initial support for Avnet MiniZed 2018-05-31 13:50:39 +02:00
zynq-picozed.dts SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
zynq-syzygy-hub.dts ARM: zynq: Convert Syzygy to DM_I2C 2019-02-14 14:31:10 +01:00
zynq-topic-miami.dts SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
zynq-topic-miamilite.dts SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
zynq-topic-miamiplus.dts topic-miamiplus: Run CPU at 800MHz for speedgrade-2 2019-01-24 10:03:45 +01:00
zynq-zc702.dts ARM: zynq: dts: Added alias for usb node 2019-10-08 09:41:27 +02:00
zynq-zc706.dts ARM: dts: zynq: correct and improve the model property of dt files 2019-02-15 15:04:00 +01:00
zynq-zc770-xm010.dts xilinx: dts: Remove additional empty lines 2019-02-15 15:04:01 +01:00
zynq-zc770-xm011-x16.dts arm: zynq: Add support for zc770-xm011-x16 configuration 2018-01-30 14:28:25 +01:00
zynq-zc770-xm011.dts ARM: zynq: Add missing nand/smcc nodes 2020-01-14 09:05:55 +01:00
zynq-zc770-xm012.dts ARM: dts: zynq: correct and improve the model property of dt files 2019-02-15 15:04:00 +01:00
zynq-zc770-xm013.dts ARM: dts: zynq: correct and improve the model property of dt files 2019-02-15 15:04:00 +01:00
zynq-zed.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
zynq-zturn.dts arm: zynq: Drop #address-cells and #size-cells from gpio-keys 2018-06-15 08:06:31 +02:00
zynq-zybo-z7.dts arm: zynq: add support for the zybo z7 board 2018-08-06 08:44:35 +02:00
zynq-zybo.dts ARM: dts: zynq: correct and improve the model property of dt files 2019-02-15 15:04:00 +01:00
zynqmp-a2197-revA.dts arm64: zynqmp: Add generic a2197 system controller config 2019-10-08 09:55:11 +02:00
zynqmp-clk-ccf.dtsi arm64: zynqmp: Sync gem clock nodes with mainline Linux 2020-01-14 09:05:56 +01:00
zynqmp-clk.dtsi arm64: dts: zynqmp: Fix node names which contain "_" 2020-01-14 09:05:55 +01:00
zynqmp-e-a2197-00-revA.dts arm64: zynqmp: Add support for e-a2197-00 System Controller 2019-10-24 13:37:03 +02:00
zynqmp-g-a2197-00-revA.dts arm64: zynqmp: Added new tps53679 compatible string for a2197-0x boards 2019-10-24 13:37:01 +02:00
zynqmp-m-a2197-01-revA.dts arm64: zynqmp: Fix m-a2197-01 DT based on latest schematics 2019-10-24 13:37:01 +02:00
zynqmp-m-a2197-02-revA.dts arm64: zynqmp: Add support for m-a2197-02 2019-10-24 13:37:03 +02:00
zynqmp-m-a2197-03-revA.dts arm64: zynqmp: Add support for m-a2197-03 2019-10-24 13:37:03 +02:00
zynqmp-mini-emmc0.dts arm64: zynqmp: Fix sdhci clock in emmc0 mini configuration 2018-11-29 10:30:02 +01:00
zynqmp-mini-emmc1.dts arm64: zynqmp: Reflect emmc controller ID in model in DT 2018-11-26 10:50:55 +01:00
zynqmp-mini-nand.dts arm64: zynqmp: Remove nand partition description from mini-nand 2020-01-14 09:05:53 +01:00
zynqmp-mini-qspi.dts arm64: zynqmp: Switch spi-flash to jedec, spi-nor compatible 2019-10-08 09:41:27 +02:00
zynqmp-mini.dts arm64: zynqmp: Add mini mtest configuration 2018-11-30 10:45:26 +01:00
zynqmp-p-a2197-00-revA.dts arm64: zynqmp: Remove fixme about memory size on zynqmp-p-a2197 2019-10-24 13:37:01 +02:00
zynqmp-r5.dts arm: zynqmp: Add ZynqMP minimal R5 support 2018-05-11 09:38:23 +02:00
zynqmp-zc1232-revA.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
zynqmp-zc1254-revA.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
zynqmp-zc1751-xm015-dc1.dts arm64: zynqmp: Use ethernet-phy as node name for ethernet phys 2019-10-24 13:37:01 +02:00
zynqmp-zc1751-xm016-dc2.dts arm64: zynqmp: Update nand device tree node properties 2019-10-24 13:37:02 +02:00
zynqmp-zc1751-xm017-dc3.dts arm64: zynqmp: Use ethernet-phy as node name for ethernet phys 2019-10-24 13:37:01 +02:00
zynqmp-zc1751-xm018-dc4.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
zynqmp-zc1751-xm019-dc5.dts arm64: zynqmp: Use ethernet-phy as node name for ethernet phys 2019-10-24 13:37:01 +02:00
zynqmp-zcu100-revC.dts arm64: dts: zynqmp: replace gpio-key,wakeup with wakeup-source property 2020-01-14 09:05:56 +01:00
zynqmp-zcu102-rev1.0.dts arm64: zynqmp: dt: Delete no-1-8-v property from zcu102-rev1.0 2019-10-24 13:37:01 +02:00
zynqmp-zcu102-revA.dts arm64: dts: zynqmp: replace gpio-key,wakeup with wakeup-source property 2020-01-14 09:05:56 +01:00
zynqmp-zcu102-revB.dts arm64: zynqmp: Remove incorrect phy from DT for zcu102-revB up 2020-01-14 09:05:55 +01:00
zynqmp-zcu104-revA.dts arm64: zynqmp: dt: Add missing DP83867 quirk 2019-10-24 13:37:02 +02:00
zynqmp-zcu104-revC.dts arm64: zynqmp: dt: Add missing DP83867 quirk 2019-10-24 13:37:02 +02:00
zynqmp-zcu106-revA.dts arm64: dts: zynqmp: replace gpio-key,wakeup with wakeup-source property 2020-01-14 09:05:56 +01:00
zynqmp-zcu111-revA.dts arm64: dts: zynqmp: replace gpio-key,wakeup with wakeup-source property 2020-01-14 09:05:56 +01:00
zynqmp-zcu208-revA.dts arm64: zynqmp: Add support for zcu208 2020-01-14 09:05:55 +01:00
zynqmp-zcu216-revA.dts arm64: zynqmp: Correct the type of eeprom for zcu216 boards 2020-01-14 09:05:55 +01:00
zynqmp-zcu1275-revA.dts arm64: zynqmp: Rename zc1275 to zcu1275 2019-07-30 10:20:06 +02:00
zynqmp-zcu1275-revB.dts zynqmp: dts: Cleanup no-1-8-v property from sdhci dt nodes 2020-01-14 09:05:55 +01:00
zynqmp-zcu1285-revA.dts arm64: zynqmp: Add support for zcu1285 revA board 2020-01-14 09:05:55 +01:00
zynqmp.dtsi arm64: zynqmp: Sync gpio-controller name location 2020-01-14 09:05:56 +01:00