imx: cx9020: migrate cx9020 to CONFIG_DM_USB

Note: gpio7_8 was never used for usb power regulator so we remove it here

Acked-by: Patrick Bruenn <p.bruenn@beckhoff.com>
Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
This commit is contained in:
Steffen Dirkwinkel 2019-10-23 07:40:41 +02:00 committed by Stefano Babic
parent 9c2b1b0f03
commit ba1444eab6
3 changed files with 16 additions and 11 deletions

View file

@ -36,7 +36,6 @@
MX53_PAD_GPIO_1__GPIO1_1 0x80000000
MX53_PAD_GPIO_4__GPIO1_4 0x80000000
MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000
MX53_PAD_PATA_DA_2__GPIO7_8 0x80000000
MX53_PAD_GPIO_16__GPIO7_11 0x80000000
MX53_PAD_EIM_OE__EMI_WEIM_OE 0x80000000
@ -220,3 +219,13 @@
full-duplex;
};
};
&usbh1 {
phy_type = "utmi";
status = "okay";
};
&usbotg {
dr_mode = "host";
status = "okay";
};

View file

@ -129,16 +129,6 @@ static void setup_gpio_leds(void)
gpio_direction_output(GPIO_LED_PWR_G, 0);
}
#ifdef CONFIG_USB_EHCI_MX5
int board_ehci_hcd_init(int port)
{
/* request VBUS power enable pin, GPIO7_8 */
gpio_direction_output(IMX_GPIO_NR(7, 8), 1);
return 0;
}
#endif
static int power_init(void)
{
/* nothing to do on CX9020 */

View file

@ -21,7 +21,13 @@ CONFIG_CMD_PXE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_FAT=y
CONFIG_CMD_USB=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_USB_EHCI_MX5=y
CONFIG_USB_STORAGE=y
CONFIG_DM_REGULATOR=y
CONFIG_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="imx53-cx9020"
CONFIG_ENV_IS_IN_MMC=y