Commit graph

10692 commits

Author SHA1 Message Date
Tom Rini
d5324e2fb6 omap3_igep00x0: Rework MACH_TYPE and status LED logic slightly
The MACH_TYPE for IGEP0032 was never officially used and has been
removed from upstream, so we must not use it.  In order to remove this
we need to rework the status LED logic.

Cc: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
2017-01-14 12:18:08 -05:00
Jagan Teki
ee86e0d2fe spi: Zap ep93xx_spi driver and related code
Dropped becuase
- driver and related configs not used any board.
- no dm conversion.

Cc: Heiko Schocher <hs@denx.de>
Cc: Sergey Kostanbaev <sergey.kostanbaev@gmail.com>
Signed-off-by: Jagan Teki <jagan@openedev.com>
2017-01-13 22:47:14 +01:00
Sjoerd Simons
e9145c55d3 rockchip: Add PXE and DHCP to the default boot targets
Now that at least on the firefly board we have network support, enable
PXE and DHCP boot targets by default.

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Acked-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-01-11 20:24:19 -07:00
Jacob Chen
21ba55dd72 rockchip: configs: make rk3036 env config same as rk3288
To make rockchip soc keep the same partition map

Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>
2017-01-11 20:21:20 -07:00
Jacob Chen
e1e9703a0a rockchip: configs: correct env offset when enable CONFIG_ROCKCHIP_SPL_BACK_TO_BROM
With CONFIG_ROCKCHIP_SPL_BACK_TO_BROM enabled,
the environment is inside u-boot.
So solve it by moving environment after u-boot.

Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>
2017-01-11 20:21:20 -07:00
Kever Yang
f57f35a833 rockchip: config: popmetal: enable the USB host controller and function
RK3288 using the dwc2 USB host controller, enable it and other usb host
funtion like storage and ether.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
Added rockchip: tag:
Signed-off-by: Simon Glass <sjg@chromium.org>
2017-01-11 20:21:20 -07:00
Tom Rini
5b30997fd2 Xilinx changes for v2017.03
- ATF handoff
 - DT syncups
 - gem: Use wait_for_bit(), add simple clk support
 - Simple clk driver for ZynqMP
 - Other small changes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAlh18E8ACgkQykllyylKDCHM3wCeKQNF2ky4r3uTrreDdGJhdDqF
 Oe4AnRwSIq1fSbjxiA8ph4mgidfTdpXG
 =wjkD
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2017.03' of git://www.denx.de/git/u-boot-microblaze

Xilinx changes for v2017.03

- ATF handoff
- DT syncups
- gem: Use wait_for_bit(), add simple clk support
- Simple clk driver for ZynqMP
- Other small changes
2017-01-11 08:04:26 -05:00
Masahiro Yamada
1d2c0506d3 mmc: move more driver config options to Kconfig
Move (and rename) the following CONFIG options to Kconfig:

  CONFIG_DAVINCI_MMC  (renamed to CONFIG_MMC_DAVINCI)
  CONFIG_OMAP_HSMMC   (renamed to CONFIG_MMC_OMAP_HS)
  CONFIG_MXC_MMC      (renamed to CONFIG_MMC_MXC)
  CONFIG_MXS_MMC      (renamed to CONFIG_MMC_MXS)
  CONFIG_TEGRA_MMC    (renamed to CONFIG_MMC_SDHCI_TEGRA)
  CONFIG_SUNXI_MMC    (renamed to CONFIG_MMC_SUNXI)

They are the same option names as used in Linux.

This commit was created as follows:

[1] Rename the options with the following command:

find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \
-type f -print | xargs sed -i -e '
s/CONFIG_DAVINCI_MMC/CONFIG_MMC_DAVINCI/g
s/CONFIG_OMAP_HSMMC/CONFIG_MMC_OMAP_HS/g
s/CONFIG_MXC_MMC/CONFIG_MMC_MXC/g
s/CONFIG_MXS_MMC/CONFIG_MMC_MXS/g
s/CONFIG_TEGRA_MMC/CONFIG_MMC_SDHCI_TEGRA/g
s/CONFIG_SUNXI_MMC/CONFIG_MMC_SUNXI/g
'

[2] Commit the changes

[3] Create entries in driver/mmc/Kconfig.
    (copied from Linux)

[4] Move the options with the following command
tools/moveconfig.py -y -r HEAD \
MMC_DAVINCI MMC_OMAP_HS MMC_MXC MMC_MXS MMC_SDHCI_TEGRA MMC_SUNXI

[5] Sort and align drivers/mmc/Makefile for readability

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2017-01-11 19:40:15 +09:00
Masahiro Yamada
0ec6eb5495 ARM: davinci: remove unused CONFIG_DAVINCI_MMC_SD1
This CONFIG is not referenced from anywhere.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2017-01-11 19:40:15 +09:00
Masahiro Yamada
ae4c81e942 mmc: move DesignWare-based drivers to Kconfig
Move (and rename) the following CONFIG options to Kconfig:

  CONFIG_EXYNOS_DWMMC  (renamed to CONFIG_MMC_DW_EXYNOS)
  CONFIG_HIKEY_DWMMC   (renamed to CONFIG_MMC_DW_K3)
  CONFIG_SOCFPGA_DWMMC (renamed to CONFIG_MMC_DW_SOCFPGA)

The "HIKEY" is a board name, so it is not suitable for the MMC
controller name.  I am following the name used in Linux.

This commit was generated as follows:

[1] Rename the config options with the following command:
find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \
-type f -print | xargs sed -i -e '
s/CONFIG_EXYNOS_DWMMC/CONFIG_MMC_DW_EXYNOS/g
s/CONFIG_HIKEY_DWMMC/CONFIG_MMC_DW_K3/g
s/CONFIG_SOCFPGA_DWMMC/CONFIG_MMC_DW_SOCFPGA/g
'

[2] Commit the changes

[3] Create the entries in drivers/mmc/Kconfig
    (with default y for EXYNOS and SOCFPGA)

[4] Run the following:
tools/moveconfig.py -y -r HEAD MMC_DW_EXYNOS MMC_DW_K3 MMC_DW_SOCFPGA

[5] Sort and align drivers/mmc/Makefile for readability

[6] Clean-up doc/README.socfpga by hand

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2017-01-11 19:40:15 +09:00
Masahiro Yamada
55ed3b4698 mmc: move CONFIG_DWMMC to Kconfig, renaming to CONFIG_MMC_DW
This commit was created as follows:

[1] Rename the option with the following command:
find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \
-type f -print | xargs sed -i -e 's/CONFIG_DWMMC/CONFIG_MMC_DW/g'

[2] create the entry for MMC_DW in drivers/mmc/Kconfig
    (the prompt and help were copied from Linux)

[3] run "tools/moveconfig.py -y MMC_DW"

[4] add "depends on MMC_DW" to the MMC_DW_ROCKCHIP entry

[5] Clean-up doc/README.socfpga by hand

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2017-01-11 19:40:14 +09:00
Masahiro Yamada
b1b1add38c ARM: socfpga: remove unused CONFIG option and cleanup README.socfpga
CONFIG_SOCFPGA_DWMMC_FIFO_DEPTH is defined in the socfpga_common.h,
but not referenced at all.  Remove.

Also, clean-up the README.socfpga.  CONFIG_MMC should not be defined
in the header since it was moved to Kconfig by commit c27269953b
("mmc: complete unfinished move of CONFIG_MMC").  I see no grep hit
for the others.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2017-01-11 19:40:14 +09:00
Michal Simek
7364dfe7bf ARM64: zynqmp: Move CONFIG_AHCI from board file
Move configuration option from board file to defconfig.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-01-11 07:00:38 +01:00
Tom Rini
04770e6e91 Merge git://git.denx.de/u-boot-dm 2017-01-10 08:19:33 -05:00
Tom Rini
0b8404332e Merge branch 'master' of git://git.denx.de/u-boot-sunxi 2017-01-10 08:19:21 -05:00
Siva Durga Prasad Paladugu
5ce987feb3 ARM64: zynqmp: Enable fastboot for first SD/MMC/EMMC device
DNL numbers are not changed that's why fastboot needs to be called with
-i parameter (Xilinx vendor id).

- Show available devices
sudo fastboot -i 0x03fd devices
xilinx_zynqmp_zcu100	fastboot

- Stop fastboot and go back to U-Boot prompt
sudo fastboot -i 0x03fd continue

- Reboot the board
sudo fastboot -i 0x03fd reboot

- Get internal variables
sudo fastboot -i 0x3fd getvar bootloader-version
bootloader-version: U-Boot 2016.07-00026-g19bd53044817
sudo fastboot -i 0x3fd getvar downloadsize
downloadsize: 0x06000000
sudo fastboot -i 0x3fd getvar version
version: 0.4
(regular variables needs to have fastboot. prefix - there is also
serialno variable which should be define as serial#)

- Format SD/MMC/EMMC card
sudo fastboot -i 0x3fd oem format
- Write images to boot and Linux partition
sudo fastboot -i 0x3fd flash boot sd.img
sudo fastboot -i 0x3fd flash Linux os.img

- Creating sd.img or os.img
$ dd if=/dev/zero of=sd.img bs=1024 count=1024
$ mkfs.vfat sd.img
$ mkdir sd-mount
$ mount -o loop sd.img sd-mount
$ echo foo > sd-mount/bar
$ umount sd-mount

partitions setting should be checked by running gpt command.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-01-10 10:18:12 +01:00
Michal Simek
c1d7f29b62 ARM: zynq: Remove CONFIG_BOOTP_SERVERIP
Do the same change which was done in ZynqMP by:
"ARM64: zynqmp: Remove CONFIG_BOOTP_SERVERIP"
(sha1: a8b6a156c0)

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-01-10 10:18:11 +01:00
Michal Simek
6ebf8a4a9d ARM: zynq: Move CONFIG_SYS_TEXT_BASE to Kconfig
Enable CONFIG_SYS_TEXT_BASE via Kconfig.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-01-10 10:18:11 +01:00
Siva Durga Prasad Paladugu
6f09d34338 ARM64: zynqmp: Add support to save env to FAT
Add support to save environment as a file of FAT filesystem
on to SD card. The file will be saved with name uEnv.txt.
This environment will be retrieved during boot.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-01-10 10:18:11 +01:00
Siva Durga Prasad Paladugu
936b038496 ARM64: zynqmp: Increase environment size to 32K
Increase environment size to 32K as the current default
environment itself is greater than 4K.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-01-10 10:18:11 +01:00
Michal Simek
2902a9b7a9 microblaze: Enable option to overwrite default variables
Enable overwriting variables out of main config file.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-01-10 10:18:11 +01:00
Michal Simek
a9fb35a8db microblaze: Remove hardcoded IP address from config
IP addresses shouldn't be hardcoded in board config.
This patch removes them.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-01-10 10:18:11 +01:00
Mugunthan V N
1dfd7c2112 am335x_evm: enable usb ether gadget as it supports DM_ETH
Since usb ether gadget have support for driver model, so enable
usb ether gadget.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-01-09 11:16:22 -07:00
Andrew F. Davis
4d82c4b53e am335x: configs: Use ISW_ENTRY_ADDR to set SPL_TEXT_BASE
The SPL load address changes based on boot type in HS devices,
ISW_ENTRY_ADDR is used to set this address for AM43xx based SoCs
for similar reasons. Add this same logic for AM33xx devices.

Also make the default value for ISW_ENTRY_ADDR correct for GP
devices based on SoC, HS devices already pick the correct
value in their defconfig.

Signed-off-by: Andrew F. Davis <afd@ti.com>
2017-01-08 08:31:46 -05:00
Tom Rini
88c7da6275 Merge branch 'master' of git://git.denx.de/u-boot-spi 2017-01-04 19:41:23 -05:00
York Sun
51370d5618 ddr: fsl: Merge macro CONFIG_NUM_DDR_CONTROLLERS and CONFIG_SYS_NUM_DDR_CTRLS
These two macros are used for the same thing, the total number of DDR
controllers for a given SoC. Use SYS_NUM_DDR_CTRLS in Kconfig and
merge existing usage.

Signed-off-by: York Sun <york.sun@nxp.com>
2017-01-04 19:40:52 -05:00
York Sun
66e399b68d ddr: fsl: Move macro CONFIG_NUM_DDR_CONTROLLERS to Kconfig
Use option NUM_DDR_CONTROLLERS in ddr Kconfig and clean up existing
usage in ls102xa and fsl-layerscape. Remove all powerpc macros in
config header and board header files.

Signed-off-by: York Sun <york.sun@nxp.com>
2017-01-04 19:40:49 -05:00
York Sun
63659ff317 powerpc: mpc85xx: Move CONFIG_SYS_FSL_ERRATUM_* to Kconfig
Use Kconfig to select errata workaround.

Signed-off-by: York Sun <york.sun@nxp.com>
2017-01-04 19:40:46 -05:00
York Sun
c01e4a1a6f mmc: move CONFIG_SYS_FSL_ERRATUM_ESDHC* to Kconfig
Add option SYS_FSL_ERRATUM_ESDHC111, SYS_FSL_ERRATUM_ESDHC13,
SYS_FSL_ERRATUM_ESDHC135, SYS_FSL_ERRATUM_ESDHC_A001 to mmc Kconfig.
Move existing macros to related Kconfig.

Signed-off-by: York Sun <york.sun@nxp.com>
[trini: Migrate bk4r1]
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-01-04 19:40:44 -05:00
York Sun
d26e34c4c4 fsl_ddr: Move DDR config options to driver Kconfig
Create driver/ddr/fsl/Kconfig and move existing options. Clean up
existing macros.

Signed-off-by: York Sun <york.sun@nxp.com>
[trini: Migrate sbc8641d, xpedite537x and MPC8536DS, run a moveconfig.py -s]
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-01-04 19:40:41 -05:00
York Sun
146ded4d25 powerpc: T2081QDS: Remove macro T2081QDS
Use TARGET_T2081QDS from Kconfig instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2017-01-04 19:40:28 -05:00
York Sun
86e0a31321 powerpc: T2080RDB: Remove macro CONFIG_T2080RDB
Use TARGET_T2080RDB from Kconfig instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2017-01-04 19:40:27 -05:00
York Sun
80d261881f powerpc: T2080QDS: Remove macro T2080QDS
Use TARGET_T2080QDS from Kconfig instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2017-01-04 19:40:26 -05:00
York Sun
f4f6694060 powerpc: T1040QDS: Remove macro CONFIG_T1040QDS
Use TARGET_T1040QDS from Kconfig instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2017-01-04 19:40:24 -05:00
York Sun
960286b6d9 powerpc: T1024RDB: Remove macro CONFIG_T1024RDB
Use TARGET_T1024RDB from Kconfig instead.

Signed-off-by: York Sun <york.sun@nxp.com>
[trini: Get missing hunk in board/freescale/t102xrdb/ddr.c]
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-01-04 19:40:24 -05:00
York Sun
9082405d47 powerpc: T1023RDB: Remove macro CONFIG_T1023RDB
Use TARGET_T1023RDB from Kconfig instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2017-01-04 19:40:22 -05:00
York Sun
90b80386ff crypto: Move CONFIG_SYS_FSL_SEC_LE and _BE to Kconfig
Use Kconfig option to set little- or big-endian access to secure
boot and trust architecture.

Signed-off-by: York Sun <york.sun@nxp.com>
2017-01-04 19:40:19 -05:00
York Sun
2c2e2c9e14 crypto: Move SYS_FSL_SEC_COMPAT into driver Kconfig
Instead of define CONFIG_SYS_FSL_SEC_COMPAT in header files for PowerPC
and ARM SoCs, move it to Kconfig under the driver.

Signed-off-by: York Sun <york.sun@nxp.com>
2017-01-04 19:40:17 -05:00
York Sun
f8dee36034 powerpc: E500: Move CONFIG_E500 and CONFIG_E500MC to Kconfig
Use Kconfig option for E500 and E500MC macros.

Signed-off-by: York Sun <york.sun@nxp.com>
2017-01-04 19:40:12 -05:00
Vignesh R
57897c13de spi: cadence_qspi_apb: Use 32 bit indirect write transaction when possible
According to Section 11.15.4.9.2 Indirect Write Controller of K2G SoC
TRM SPRUHY8D[1], the external master is only permitted to issue 32-bit
data interface writes until the last word of an indirect transfer
otherwise indirect writes is known to fails sometimes. So, make sure
that QSPI indirect writes are 32 bit sized except for the last write. If
the txbuf is unaligned then use bounce buffer to avoid data aborts.

So, now that the driver uses bounce_buffer, enable CONFIG_BOUNCE_BUFFER
for all boards that use Cadence QSPI driver.

[1]www.ti.com/lit/ug/spruhy8d/spruhy8d.pdf

Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-01-04 16:38:12 +01:00
Andre Przywara
eb77f5c9f6 sunxi: A64: enable SPL
Now that the SPL is ready to be compiled in AArch64 and the DRAM
init code is ready, enable SPL support for the A64 SoC and in the
Pine64 defconfig.
For now we keep the boot0 header in the U-Boot proper, as this allows
to still use boot0 as an SPL replacement without hurting the SPL use
case.
We disable FEL support for now by making its compilation conditional
and disabling it for ARM64, as the code isn't ready yet.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-01-04 16:37:43 +01:00
Andre Przywara
ebda0cc509 armv8: prevent using THUMB
The predominantely 32-bit ARM targets try to compile the SPL in Thumb
mode to reduce code size.
The 64-bit AArch64 instruction set does not know an alternative, concise
encoding, so the Thumb build option should only be set for 32-bit
targets.
Likewise -marm machine options are only valid for ARMv7 targets.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-01-04 16:37:40 +01:00
Tom Rini
516457013e Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2017-01-02 16:32:05 -05:00
Jagan Teki
66d1d687e4 configs: engicam: Add fitboot env support
Add FIT image booting from MMC device, during MMC bootcmd
u-boot env script look for bootscript, else fit image or else
finally look for legacy image uImage.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-01-02 17:34:11 +01:00
Jagan Teki
29005ba05c configs: engicam: Cleanup on mmcboot env
- Add tab space
- remove exctra 'mmc dev ${mmcdev}'

Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-01-02 17:34:11 +01:00
Jagan Teki
8098b8cb3f configs: engicam: Enable CONFIG_IMAGE_FORMAT_LEGACY
Enabling FIT along with Signature will make bootm to
not-understanding u-boot legacy image formats like uImage, etc.
So this patch enabling legacy image format for backward compatibility.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-01-02 17:34:11 +01:00
Jagan Teki
ada832f8f5 defconfigs: imx6: engicam: Enable FIT
Enable Flattened Image Tree support for all Engicam boards.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-01-02 17:34:11 +01:00
Jagan Teki
ddd90660df imx6: engicam: Add nandboot env support
Add config options for booting Linux from NAND in UBI format.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-01-02 17:30:51 +01:00
Jagan Teki
8a9c775aff defconfigs: engicam: Enable UBI commands
Create ubifs.img:
$ mkfs.ubifs -q -r /rootfs -m 4096 -e 253952 -c 7936 -o ubifs.img

Write ubifs.img:
---------------
icorem6qdl> nand erase.part rootfs
icorem6qdl> ubi part rootfs
icorem6qdl> ubi create rootfs

icorem6qdl> ext4load mmc 0:2 ${loadaddr} ubifs.img
166592512 bytes read in 8091 ms (19.6 MiB/s)
icorem6qdl> ubi write ${loadaddr} rootfs ${filesize}
166592512 bytes written to volume rootfs
icorem6qdl> ubifsmount ubi0:rootfs

Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-01-02 17:30:51 +01:00
Jagan Teki
8342577148 configs: engicam: Rename nand with gpmi-name in mtdparts
gpmi-nand is the proper name used in nand driver from Linux for all
imx related nand boards, so rename mtdparts name as gpmi-nand instead
of nand, this will eventually reflects all nand info to Linux from
u-boot like mtdparts.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-01-02 17:25:05 +01:00
Jagan Teki
bfd96402c2 imx6: engicam: Use bootm instead of bootz
Boot Linux with uImage instead of zImage, so update
bootz with bootm.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-01-02 17:25:05 +01:00
Jagan Teki
08d7985b53 configs: engicam: Increase nand kernel partition size
Increase the nand kernel partition size, for supporting
large uImage files, maximum 8MiB.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-01-02 17:22:22 +01:00
Uri Mashiach
99b02b4dce arm: am57xx: cl-som-am57x: update default env
Modify U-Boot default env settings.

Boot sequence:
1. SD card boot script
2. SD card boot no script
3. SATA boot script
4. SATA boot no script
5. eMMC boot script
6. eMMC boot no script

Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-01-02 11:14:07 -05:00
Dmitry Lifshitz
fc300e2c5d arm: am57xx: cl-som-am57x: add ETH support
Add MAC support.

Use PHY, connected to RGMII1 as a default Eth adapter,
by appropriate setting of 'cpsw_data.active_slave'.

'cpsw_phy' env variable can override this setting.

Set the MAC addresses in the U-Boot environment.
The addresses are retrieved from the on-board EEPROM or from the SOC's
MAC fuses.

Set the following PHYs RGMII clock delays:
- Enable RX delay
- Disable TX delay

Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
[uri.mashiach@compulab.co.il: add RGMII clock delays]
Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-01-02 11:14:07 -05:00
Dmitry Lifshitz
965c509f0a arm: am57xx: cl-som-am57x: fetch board rev from EEPROM
Add PCB revision message.
Implement board revision get_board_rev API.

Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Commit description update.
Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-01-02 11:14:06 -05:00
Dmitry Lifshitz
46650d583b arm: am57xx: cl-som-am57x: add initial board support
Features supported :

* Serial console
* SPI Flash
* MMC/SD Card
* eMMC storage
* SATA
* PCA9555 - GPIO expander over I2C5 bus
* USB

Use spl alternate boot device feature to define fallback to
the main boot device as it is defined by hardware.

Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
[uri.mashiach@compulab.co.il: Adjust to v2016.11]
Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2017-01-02 11:14:06 -05:00
Adam Ford
208d14bacd OMAP3: omap3_logic: Remove display parameter
The display is done in the device tree now, and there is no need
to pass 'display' kernel parameter any longer.

Signed-off-by: Adam Ford <aford173@gmail.com>
2017-01-02 11:14:03 -05:00
Adam Ford
f9e7501f84 ARM: OMAP3_LOGIC: Remove ONENAND config options
These boards do not and never have had ONENAND support, so let's remove it.

Signed-off-by: Adam Ford <aford173@gmail.com>
2017-01-02 11:14:03 -05:00
Kevin Hilman
25aaebdb12 ARM: imx7s-warp: enable USB gadget ethernet
Enable USB gadget ethernet by default to have networking capabilities.

Tested using DHCP and TFTP to transfer kernel, DT, ramdisk.

Cc: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-01-02 17:11:10 +01:00
Fabio Estevam
5d3a28abe4 udoo_neo: Use 'fdtfile' variable name
'fdtfile' is the preferred name for the variable that contains the
device tree blob according to the README file.

It also makes it consistent with other i.MX boards that use config_distro,
so change it accordingly.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-01-02 17:10:27 +01:00
Sven Ebenfeld
15b505b055 arm: imx: add HAB authentication of image to SPL boot
When using HAB as secure boot mechanism on Wandboard, the chain of
trust breaks immediately after the SPL. As this is not checking
the authenticity of the loaded image before jumping to it.

The HAB status output will not be implemented in SPL as it adds
a lot of strings that are only required in debug cases. With those
it exceeds the maximum size of the available OCRAM (69 KiB).

The SPL MISC driver support must be enabled, so that the driver can use OTP fuse
to check if HAB is enabled.

Cc: sbabic@denx.de

v2-Changes: None

Signed-off-by: Sven Ebenfeld <sven.ebenfeld@gmail.com>
Reviewed-by: George McCollister <george.mccollister@gmail.com>
Tested-by: George McCollister <george.mccollister@gmail.com>
2017-01-02 17:04:38 +01:00
Masahiro Yamada
3d3a74cc8c mmc: move MMC_SDHCI_IO_ACCESSORS to Kconfig
This is a user-unconfigurable option that is selected by the
drivers that need to overwrite SDHCI IO memory accessors.
(BCM2835 SDHCI seems the only driver that needs to do so.)

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2016-12-29 13:08:17 -05:00
Masahiro Yamada
45a68fe267 mmc: move some SDHCI related options to Kconfig
While I moved the options, I also renamed them so that they are all
prefixed with MMC_SDHCI_.

This commit was created in the following steps.

[1] Rename with the following command
find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \
-type f -print | xargs sed -i -e '
s/CONFIG_MMC_SDMA/CONFIG_MMC_SDHCI_SDMA/g
s/CONFIG_BCM2835_SDHCI/CONFIG_MMC_SDHCI_BCM2835/g
s/CONFIG_KONA_SDHCI/CONFIG_MMC_SDHCI_KONA/g
s/CONFIG_MV_SDHCI/CONFIG_MMC_SDHCI_MV/g
s/CONFIG_S5P_SDHCI/CONFIG_MMC_SDHCI_S5P/g
s/CONFIG_SPEAR_SDHCI/CONFIG_MMC_SDHCI_SPEAR/g
'

[2] create the Kconfig entries in drivers/mmc/Kconfig

[3] Move the options by the following command
tools/moveconfig.py -y MMC_SDHCI_SDMA MMC_SDHCI_BCM2835 \
MMC_SDHCI_KONA MMC_SDHCI_MV MMC_SDHCI_S5P MMC_SDHCI_SPEAR

[4] Sort drivers/mmc/Makefile for readability

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2016-12-29 13:08:16 -05:00
Masahiro Yamada
e1ce61fbba mmc: move CONFIG_SDHCI to Kconfig, renaming to CONFIG_MMC_SDHCI
Move CONFIG_SDHCI to Kconfig and rename it to CONFIG_MMC_SDHCI.
My motivation for the rename is, ultimately, to make all the MMC
options prefixed with MMC_ and SDHCI options with MMC_SDHCI_,
like Linux.

This commit was created as follows:

[1] Rename the config option with the following command:
find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \
-type f -print | xargs sed -i -e 's/CONFIG_SDHCI/CONFIG_MMC_SDHCI/g'

[2] create the entry for MMC_SDHCI in drivers/mmc/Kconfig

[3] run "tools/moveconfig.py -y MMC_SDHCI"

[4] add "depends on MMC_SDHCI" to existing SDHCI driver entries

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2016-12-29 13:08:12 -05:00
Masahiro Yamada
c27269953b mmc: complete unfinished move of CONFIG_MMC
Commit 7a777f6d6f ("mmc: Add generic Kconfig option") created
a Kconfig entry for this option without any actual moves, then
commit 44c798799f ("sunxi: Use Kconfig CONFIG_MMC") moved
instances only for SUNXI.

We generally do not like such partial moves.  This kind of work
is automated by tools/moveconfig.py, so it is pretty easy to
complete this move.

I am adding "default ARM || PPC || SANDBOX" (suggested by Tom).
This shortens the configs and will ease new board porting.

This commit was created as follows:

[1] Edit Kconfig (remove the "depends on", add the "default",
    copy the prompt and help message from Linux)

[2] Run 'tools/moveconfig.py -y -s -r HEAD MMC'

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2016-12-29 13:08:07 -05:00
Ajay Bhargav
c7c47ca246 Update Maintainer and Author's email address
I am not longer using my old email address
"ajay.bhargav@einfochips.com". For U-Boot development email address is
now updated to contact@8051projects.net

Signed-off-by: Ajay Bhargav <contact@8051projects.net>
2016-12-27 11:24:17 -05:00
Tom Rini
7ceae0eac0 Merge branch 'master' of git://git.denx.de/u-boot-spi 2016-12-23 18:41:32 -05:00
Jagan Teki
cb71c6d854 spi: Zap armada100_spi.c and env
armada100_spi.c and related env is zapping becuase
of "no DM conversion".

Cc: Ajay Bhargav <ajay.bhargav@einfochips.com>
Signed-off-by: Jagan Teki <jagan@openedev.com>
2016-12-21 12:18:47 +01:00
Jagan Teki
353f6a770f spi: Zap mpc52xx_spi.c, config and related code
armada100_spi.c, related config options and related codes
are zapping becuase of "no DM conversion".

Cc: Werner Pfister <Pfister_Werner@intercontrol.de>
Signed-off-by: Jagan Teki <jagan@openedev.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-21 12:14:37 +01:00
Michal Simek
49c4c78e70 block: Move ceva driver to DM
This patch also includes ARM64 zynqmp changes:
- Remove platform non DM initialization
- Remove hardcoded sata base address

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-12-20 09:15:27 +01:00
Tom Rini
8ea05705a7 Merge branch 'master' of git://www.denx.de/git/u-boot-imx
Migrate CONFIG_ARCH_USE_MEMSET/MEMCPY with this merge.

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-12-18 17:43:20 -05:00
Tom Rini
b5178a1f24 Merge git://git.denx.de/u-boot-fsl-qoriq 2016-12-16 12:46:36 -05:00
Jagan Teki
854bb75be9 imx6: icorem6_rqs: Add FEC support
Add FEC support for Engicam i.CoreM6 RQS modules.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-12-16 18:39:06 +01:00
Jagan Teki
bd363f80e4 imx6: geam6ul: Add FEC support
Add FEC support for Engicam GEAM6UL module.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-12-16 18:39:05 +01:00
Jagan Teki
871ec6da42 arm: imx6q: Add Engicam i.CoreM6 Quad/Dual RQS Starter Kit initial support
Boot from MMC:
-------------
U-Boot SPL 2016.11-rc2-g217bd8e-dirty (Nov 08 2016 - 22:59:44)
Trying to boot from MMC1

U-Boot 2016.11-rc2-g217bd8e-dirty (Nov 08 2016 - 22:59:44 +0530)

CPU:   Freescale i.MX6D rev1.2 at 792 MHz
Reset cause: POR
Model: Engicam i.CoreM6 Quad/Dual RQS Starter Kit
DRAM:  512 MiB
MMC:   FSL_SDHC: 0
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   CPU Net Initialization Failed
No ethernet found.
Hit any key to stop autoboot:  0
icorem6qdl-rqs>

Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-12-16 17:16:10 +01:00
Jagan Teki
704b9cfc9e imx6: geam6ul: Add default mtd nand partition table
geam6ul> mtdparts

device nand0 <nand>, # parts = 6
0: spl                 0x00200000      0x00000000      0
1: uboot               0x00200000      0x00200000      0
2: env                 0x00100000      0x00400000      0
3: kernel              0x00400000      0x00500000      0
4: dtb                 0x00100000      0x00900000      0
5: rootfs              0x1f600000      0x00a00000      0

Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-12-16 17:16:10 +01:00
Jagan Teki
b05c344809 imx6: geam6ul: Enable MTD device support
Enable MTD device, partition and command support.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-12-16 17:16:10 +01:00
Jagan Teki
084cbb6048 imx6: geam6ul: Add NAND support
Add NAND support for Engicam GEAM6UL board.

Boot Log:
--------
U-Boot SPL 2016.11-g537fa5f (Nov 28 2016 - 11:42:28)
Trying to boot from NAND
NAND : 256 MiB

U-Boot 2016.11-g537fa5f (Nov 28 2016 - 11:20:06 +0100)

CPU:   Freescale i.MX6UL rev1.1 69 MHz (running at 396 MHz)
CPU:   Automotive temperature grade (-40C to 125C) at 42C
Reset cause: WDOG
Model: Engicam GEAM6UL
DRAM:  128 MiB
NAND:  256 MiB
MMC:   FSL_SDHC: 0
* Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   No ethernet found.
Hit any key to stop autoboot:  0

Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-12-16 17:16:10 +01:00
Jagan Teki
a5b9f8c8f0 arm: imx6ul: Add Engicam GEAM6UL Starter Kit initial support
Boot Log:
--------
U-Boot SPL 2016.11-rc2-00144-g922adaa-dirty (Oct 28 2016 - 18:55:30)
Trying to boot from MMC1

U-Boot 2016.11-rc2-00144-g922adaa-dirty (Oct 28 2016 - 18:55:30 +0530)

CPU:   Freescale i.MX6UL rev1.1 528 MHz (running at 396 MHz)
CPU:   Industrial temperature grade (-40C to 105C) at 43C
Reset cause: POR
Model: Engicam GEAM6UL
DRAM:  128 MiB
MMC:   FSL_SDHC: 0
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   CPU Net Initialization Failed
No ethernet found.
Hit any key to stop autoboot:  0
geam6ul>

Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-12-16 17:16:10 +01:00
Jagan Teki
3713571cb7 imx6: icorem6: Add custom splashscreen support
Add custom splashscreen, engicam.bmp support for
Engicam i.CoreM6 qdl board.

Cc: Anatolij Gustschin <agust@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-12-16 17:15:27 +01:00
Jagan Teki
ca7463c9d7 imx6: icorem6: Add framebuffer support
Add IPUv3 framebuffer support for Engicam i.CoreM6 qdl board.

Cc: Anatolij Gustschin <agust@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-12-16 17:15:27 +01:00
Fabio Estevam
be72591bcd Kconfig: Move USE_ARCH_MEMCPY/MEMSET to Kconfig
Move USE_ARCH_MEMCPY/MEMSET options to Kconfig.

Make it "default y" for the ARMv7 architecture and make it
depend on !ARM64 && !SPL.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-12-16 07:14:38 -05:00
Patrick Bruenn
98d62e618b arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC
Add CX9020 board based on mx53loco.
Add simplified imx53 base device tree from kernel v4.8-rc8, to reuse
serial_mxc with DTE and prepare for device tree migration of other
functions and imx53 devices.

The CX9020 differs from i.MX53 Quick Start Board by:
- use uart2 instead of uart1
- DVI-D connector instead of VGA
- no audio
- CCAT FPGA connected to emi
- enable rtc

Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
2016-12-16 12:57:12 +01:00
Peng Fan
47f73504d8 arm: imx: add i.MX6SLL EVK board support
Add i.MX6SLL EVK board support.
1. Add imx6sll-evk device tree.
2. Enable SDHC/I2C/UART.
3. Enable REGULATOR/PMIC/I2C/GPIO/SDHC/PINCTRL driver.

Boot Log:
U-Boot 2016.11-00127-gc635871-dirty (Nov 24 2016 - 13:28:19 +0800)

CPU:   Freescale i.MX6SLL rev1.0 at 792MHz
CPU:   Commercial temperature grade (0C to 95C)Reset cause: POR
Model: Freescale i.MX6SLL EVK Board
Board: MX6SLL EVK
DRAM:  2 GiB
i2c bus 0 at 35258368, no gpio pinctrl state.
PMIC: PFUZE100! DEV_ID=0x10 REV_ID=0x21
MMC:   FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
In:    serial
Out:   serial
Err:   serial
Net:   CPU Net Initialization Failed
No ethernet found.
Hit any key to stop autoboot:  0

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2016-12-16 11:38:24 +01:00
Peng Fan
0114011986 mx6_common: correct loadaddr and text base for i.MX6SLL
Correct loadaddr and text base for i.MX6SLL

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2016-12-16 11:38:24 +01:00
Sanchayan Maity
faf1e62bf0 configs: colibri_vf: Add fdt_fixup environment variable
u-boot allows modifying a device tree after it is loaded into
memory. Add fdt_fixup hook in u-boot environment which can
facilitate such modifications.

Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
2016-12-16 11:36:20 +01:00
Marcin Niestroj
c9e40e65e1 board/liteboard: Add support for liteBoard
liteBoard is a development board which uses liteSOM as its base.

Hardware specification:
 * liteSOM (i.MX6UL, DRAM, eMMC)
 * Ethernet PHY (id 0)
 * USB host (usb_otg1)
 * MicroSD slot (uSDHC1)

Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
2016-12-16 10:31:13 +01:00
Breno Lima
a11e30f8c8 udoo_neo: Add Ethernet support
UDOO Neo boards has one FEC port connected to KSZ8091, add support for it.

Tested on a UDOO Neo Full with "dhcp zImage" command.

Signed-off-by: Breno Lima <breno.lima@nxp.com>
2016-12-16 10:21:29 +01:00
Breno Lima
21729bcdbd udoo_neo: Add PFUZE300 PMIC support
UDOO Neo boards has a PFUZE300 connected to I2C1 bus.

Tested on a UDOO Neo Full with "pmic PFUZE3000 dump" command.

Signed-off-by: Breno Lima <breno.lima@nxp.com>
2016-12-16 10:21:29 +01:00
Breno Lima
0719b16f19 udoo_neo: Add thermal support
Add thermal support on the Kconfig file.

Signed-off-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-12-16 10:21:25 +01:00
Breno Lima
6cc8d4da8d udoo_neo: Remove console option
It's not necessary to define the console option as we use the distro config.

Signed-off-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-12-16 10:20:17 +01:00
Breno Lima
b3f276cb6f udoo_neo: Remove mmcautodetect option
It's not necessary to define the mmcautodetect as it is not used anywhere.

Signed-off-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-12-16 10:20:17 +01:00
Breno Lima
c94981efa2 udoo_neo: Remove USDHC3 support
It's not necessary to support USDHC3 in U-Boot as it's being used for
the WLAN.

Signed-off-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-12-16 10:09:24 +01:00
Max Krummenacher
a02d517b01 arm: imx: initial support for colibri imx6
This adds board support for the Toradex module family Colibri iMX6.
The familiy consists of a module with i.MX6 DualLite, i.MX6 Solo, both
with a version for commercial and industrial temperature range.

Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
2016-12-16 10:03:43 +01:00
Max Krummenacher
592f4aed6d arm: imx: initial support for apalis imx6
This adds board support for the Toradex module family Apalis iMX6.
The familiy consists of a module with i.MX6 Dual, i.MX6 Quad with
commercial and industrial temperature range.

Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
2016-12-16 10:02:45 +01:00
macro.wave.z@gmail.com
2d16a1a6c9 ARMv8: LS1043A: change macro CONFIG_ARMV8_PSCI definition
NXP/Freescale uses macro CONFIG_ARMV8_PSCI to enable their private PSCI
implementation in PPA firmware, but this macro naming too generic, so this
patch replaces it with a specic one CONFIG_FSL_PPA_ARMV8_PSCI.
And this macro CONFIG_ARMV8_PSCI will be used for a generic PSCI for ARMv8
which will be added in following patchs.

Signed-off-by: Hongbo Zhang <hongbo.zhang@nxp.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-12-15 11:57:18 -08:00
Fabien Parent
963ed6f323 davinci: omapl138_lcdk: boot from zImage
Stop booting legacy uImage and now boot zImage.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-09 08:40:23 -05:00
Fabien Parent
2b2cab24ac davinci: omapl138_lcdk: fix bad NAND ECC config
The configuration used to error correction was not in line with what
linux and the ROM code is using. Fix it by using the correct
configuration. Now u-boot and the SPL are able to read correctly
anything written by them.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-09 08:40:20 -05:00
Fabien Parent
c0c10449cf davinci: omapl138_lcdk: increase u-boot load size
A size of 0x200 seems way too short for u-boot. Increase the size
to 512k.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-09 08:40:19 -05:00
Tom Rini
361a879902 Revert "Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze"
This reverts commit 3edc0c2522, reversing
changes made to bb135a0180.
2016-12-09 07:56:54 -05:00
Tom Rini
3edc0c2522 Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze 2016-12-09 07:10:39 -05:00
Michal Simek
8814c03853 block: Move ceva driver to DM
This patch also includes ARM64 zynqmp changes:
- Remove platform non DM initialization
- Remove hardcoded sata base address

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Series-to: sjg, agraf@suse.de
Series-cc: uboot
Series-version: 4
Series-changes: 2
- make ceva_init_sata static
- Move SATA_CEVA to defconfig
- Initalized max_lun and max_id platdata

Series-changes: 3
- Extend Kconfig help description
- sort dm.h
- Remove SPL undefinition from board file
- Fix Kconfig dependecies
2016-12-08 09:23:48 +01:00
Anatolij Gustschin
e9c847c363 socfpga: add support for Terasic DE1-SoC board
Add CycloneV based Terasic DE1-SoC board. The board boots
from SD/MMC. Ethernet and USB host is supported.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Marek Vasut <marex@denx.de>
2016-12-06 01:45:56 +01:00
Bartosz Golaszewski
1601dd97ed davinci: omapl138_lcdk: increase PLL0 frequency
The LCDC controller on the lcdk board has high memory throughput
requirements. Even with the kernel-side tweaks to master peripheral
and peripheral bus burst priorities, the default PLL0 frquency of
300 MHz is not enough to service the LCD controller and causes
DMA FIFO underflows.

Increment the PLL0 multiplier to 37, resulting in PLL0 frequency of
456 MHz - the same value that downstream reference u-boot from Texas
Instruments uses.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-05 11:04:42 -05:00
Yegor Yefremov
88679a2912 arm: baltos: enable booting from USB
First of all U-Boot would search for a USB mass storage device
with either uEnv.txt or kernel-fit.itb and boot.

If USB mass storage device is not available or doesn't provide
these files then MMC will be tried.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-05 11:04:42 -05:00
Tom Rini
ea43683b13 Merge git://www.denx.de/git/u-boot-i2c 2016-12-05 11:02:01 -05:00
Stefan Roese
1ec5aa630a arm64: mvebu: Add PCI support to DB-88F8040 board
This patch adds PCI support to the Marvell Armada-8K devel board.
Additionally the Intel E1000 ethernet driver is enabled so that
network support is available on this board, even without the
internal network interfaces being supported (yet).

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Nadav Haklai <nadavh@marvell.com>
Cc: Neta Zur Hershkovits <neta@marvell.com>
Cc: Kostya Porotchkin <kostap@marvell.com>
Cc: Omri Itach <omrii@marvell.com>
Cc: Igal Liberman <igall@marvell.com>
Cc: Haim Boot <hayim@marvell.com>
Cc: Hanna Hawa <hannah@marvell.com>
2016-12-05 13:34:33 +01:00
Stefan Roese
633fa0e710 arm64: mvebu: Rename db-88f7040 files to armada-8k
This moves some of the Armada DB-88F7040 board specific files to a more
generic name: armada-8k. This is in preparation for the Armada-8k
support which will be added soon. And since both platforms share
most devices, lets also share most source files to not duplicate
the code here.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Nadav Haklai <nadavh@marvell.com>
Cc: Neta Zur Hershkovits <neta@marvell.com>
Cc: Kostya Porotchkin <kostap@marvell.com>
Cc: Omri Itach <omrii@marvell.com>
Cc: Igal Liberman <igall@marvell.com>
Cc: Haim Boot <hayim@marvell.com>
Cc: Hanna Hawa <hannah@marvell.com>
2016-12-05 13:28:23 +01:00
Simon Glass
08848e9c31 arm: samsung: Convert s5p_goni and smdkc100 to DM_I2C
These are the last two samsung boards that don't use DM_I2C. Move them
over, leaving #ifdefs to allow the maintainer to complete this work.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Heiko Schocher <hs@denx.de>
2016-12-05 13:27:29 +01:00
Simon Glass
fc47cf9d05 arm: exynos: i2c: Convert exynos boards to use DM_I2C
Three boards are still not converting to use DM_I2C. They are also using
the old PMIC framework. Rather than removing them, add #ifdefs to allow
them to continue to build. This will give the maintainers a little more
time to decide whether to convert them or not.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Heiko Schocher <hs@denx.de>
2016-12-05 13:27:15 +01:00
Tom Rini
194eded14c Merge git://git.denx.de/u-boot-mpc85xx 2016-12-04 13:55:15 -05:00
Simon Glass
950c3f700c arm: Remove VCMA9 board
This board has not been converted to DM_SERIAL by the deadline.
Remove it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: David Müller <d.mueller@elsoft.ch>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2016-12-04 13:55:00 -05:00
Simon Glass
fd9080ea50 arm: Remove smdk2410 board
This board has not been converted to DM_SERIAL by the deadline.
Remove it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: David Müller <d.mueller@elsoft.ch>
2016-12-04 13:54:59 -05:00
Lokesh Vutla
b9daed8a41 ti_armv7_common: env: Increase IO buffer size
There are certain environment variables whose length is greater than
the defined IO buffer size. So, increase the IO buffer size to print the
entire variables.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-04 13:54:56 -05:00
Steve Kipisz
4d8397c66f board: ti: am57xx: Add support for the am571x idk
The AM571x Industrial Development Kit (IDK) is a board based on TI's
AM571x SoC which has a single core 1.5GHz Cortex-A15processor. This
board is a development platform for the Industrial Market with:

- 1GB of DDR3L
- Dual 1Gbps Ethernet
- HDMI
- PRU-ICSS
- uSD
- 16GB eMMC
- CAN
- RS-485
- PCIe
- USB3.0
- Video Input Port
- Industrial IO port and expansion connector

The PRU/ICSS will be supported by 3rd party software for EtherCat,
Profibus, and other Industrial protocols.

The link to the data sheet and TRM can be found here:
http://www.ti.com/product/AM5718

Signed-off-by: Steve Kipisz <s-kipisz2@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-04 13:54:55 -05:00
Lokesh Vutla
f7f9f6be95 board: ti: am57xx: Add support for detection of X15 revb1
BeagleBoard-X15 Rev B1 with SR1.1 platform have incompatible changes for HDMI
GPIO requiring new dtb support. This implies we have to properly identify
the platform now as well. Hence provide a different board name for the
Rev B1 variants.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-04 13:54:54 -05:00
Nishanth Menon
bf43ce6ca6 board: ti: am57xx: Add support for detection of reva3 variations for GPEVM
AM57xx evm Rev A3 with SR2.0 platform have incompatible changes for HDMI
GPIO requiring new dtb support. This implies we have to properly identify
the platform now as well. Hence provide a different board name for the
Rev A3 variations.

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-04 13:54:54 -05:00
Nishanth Menon
221fd36176 configs: ti_omap5_common: Select dtb name for dra71x
Select dtb name for dra71x-evm.

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-04 13:54:52 -05:00
Tom Rini
73eed452b9 Merge branch 'master' of git://www.denx.de/git/u-boot-dm 2016-12-03 19:43:51 -05:00
Yann E. MORIN
bfb380b30a cmd: move CMD_PXE to Kconfig
Currently, CMD_PXE is forcibly enabled in config_distro_defaults.h, so
that general purpose distributions can rely on it being defined. This
header is included, under conditions or not, by various archs or
famillies of archs / SoCs.

However, it is very possible that boards based on those SoCs will not
have a physical ethernet connector at all, even if the have a MAC; for
example, the Nanopi Neo AIR (sunxi H3) does not. It is also possible
that network booting is absolutely not necessary for a device.

However, it is not possible to disable the PXE command, as it is
forcibly enabled and is non-configurable.

But it turns out we already have a config option to build a distro-ready
image, in the name of DISTRO_DEFAULTS.

Move CMD_PXE out of the hard-coded config_distro_defaults.h into a
Kconfig option, that gets selected by DISTRO_DEFAULTS when it is set.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Joe Hershberger <joe.hershberger@ni.com>
[trini: Make it select MENU, run moveconfig.py]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-12-03 13:21:24 -05:00
Tom Rini
3337e3af5d Enable DISTRO_DEFAULT on platforms that missed it before
A number of platforms had been using the distro default feature before
it was moved to Kconfig but did not enable the new Kconfig option when
it was enabled.  This caused a regression in terms of features and this
introduces breakage when more things move to Kconfig.

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-12-03 13:21:24 -05:00
Tom Rini
4880b026ec cmd: Convert CMD_BOOTMENU
Also convert MENU while we're in here.

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-12-03 13:21:23 -05:00
Fabien Parent
5ca28f67ac davinci: omapl138_lcdk: add DT support for EMMC boot
When booting from EMMC, load the DTB and pass it to the kernel.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-03 13:21:19 -05:00
Fabien Parent
f96ab6a48a davinci: omapl138_lcdk: improve readability of boot command
Improve the readability of the boot command. This will help a later
commit that adds DT support.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-03 13:21:18 -05:00
Fabien Parent
c69a05d0b9 davinci: omapl138_lcdk: add NAND SPL boot support
NAND SPL boot was missing. Add it. The README specific to omapl138-lcdk
is also removed because its content does not apply anymore, i.e. the
generated AIS image can be flashed directly to the NAND without
using any external tool to create and bootable AIS image.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-03 13:21:18 -05:00
Fabien Parent
b2b3365a1c davinci: omapl138_lck: remove obsolete define
NAND_MAX_CHIPS is not used anymore and has been replaced by
CONFIG_SYS_MAX_NAND_DEVICE. There is no need to keep the former
define.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-03 13:21:17 -05:00
Fabien Parent
ef04479627 davinci: omapl138_lcdk: use correct name for CONFIG_SYS_NAND_MASK_ALE
CONFIG_SYS_ALE_MASK is not used anywhere. It has probably been
renamed to CONFIG_SYS_NAND_MASK_ALE. Rename it and remove the former
from the config_whitelist.txt file.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-03 13:21:17 -05:00
Fabien Parent
1dbab2745a davinci: omapl138_lcdk: use correct name for CONFIG_SYS_NAND_MASK_CLE
CONFIG_SYS_CLE_MASK is not used anywhere. It has probably been
renamed to CONFIG_SYS_NAND_MASK_CLE. Rename it and remove the former
from the config_whitelist.txt file.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-03 13:21:16 -05:00
Fabien Parent
d92ca46e72 davinci: omapl138_lcdk: use correct define for 16 bit NAND chips
The omapl138_lcdk header defines CONFIG_SYS_NAND_BUSWIDTH_16_BIT while
the correct name is CONFIG_SYS_NAND_BUSWIDTH_16BIT.
While renaming the only occurrence of CONFIG_SYS_NAND_BUSWIDTH_16_BIT,
let's also remove it from the config_whitelist.txt file.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-03 13:21:16 -05:00
Fabien Parent
a5ab44f69b davinci: omapl138_lcdk: configure ddr2
The SPL is unable to load u-boot because the DDR2 is not configured.
Configure the DDR2.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-03 13:21:14 -05:00
Fabien Parent
b31bf37a38 ARM: davinci: Move CONFIG_SYS_DA850_DDR_INIT to Kconfig
Clean config headers by moving CONFIG_SYS_DA850_DDR_INIT away to a
Kconfig file.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-03 13:21:12 -05:00
Fabien Parent
f519b36491 ARM: davinci: Move CONFIG_SYS_DA850_PLL_INIT to Kconfig
Clean config headers by moving CONFIG_SYS_DA850_PLL_INIT away to a
Kconfig file.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-03 13:21:12 -05:00
Nishanth Menon
3891a54f47 ARM: DRA7x/AM57xx: Get rid of CONFIG_AM57XX
CONFIG_AM57XX is just an unnecessary macro that is redundant given So,
remove the same instead of spreading through out the u-boot source
code and getting in the way to maintain common code for DRA7x family.

Acked-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-03 13:21:11 -05:00
Lokesh Vutla
1e93cc8473 ti_armv7_common: env: Add support for loading FIT images
FIT is a new image format which is a Tree like structure and gives more
flexibility in handling of various images. Mainly used for unification of
multiple images in a single blob and provide security information for each
image.

U-Boot already has support for loading such images, so adding the environment
support to load FIT image on all TI platforms.

Reviewed-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-03 13:21:08 -05:00
Lokesh Vutla
2a77788439 ti_armv7_common: env: Consolidate support for loading images from mmc
Support for loading images from mmc is duplicated in all TI platforms.
Add this information to DEFAULT_MMC_TI_ARGS so that it can be reused
in all TI platforms.

Reviewed-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-03 13:21:07 -05:00
Mugunthan V N
4623f974a5 configs: am335x: usb: do not define CONFIG_DM_USB for spl
Since OMAP's spl doesn't support DM currently, do not define
CONFIG_DM_USB for spl build.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-02 21:03:34 -07:00
Vladimir Zapolskiy
47c5705d82 r2dplus: fixup CONFIG_SYS_TEXT_BASE to account arch/sh changes
This change allows to reserve enough space at the end of board SDRAM
to store two copies of U-Boot and malloc heap.

Due to selection of the CONFIG_SYS_TEXT_BASE the second code/data
copying is not avoided, first of all this may depend on a used
toolchain, secondly at this point some level of volatility is wanted
to do more platform changes and do not care about probably changed
calculated in runtime relocation offset.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2016-12-02 21:32:54 -05:00
Vladimir Zapolskiy
18a40e8470 sh: define CONFIG_DISPLAY_BOARDINFO to print board information
All SH boards define a checkboard() function which outputs basic board
information on boot, however generic board support requires to define
CONFIG_DISPLAY_BOARDINFO to do that, so define it for the boards.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-12-02 21:32:49 -05:00
Vladimir Zapolskiy
9079acba9f sh: remove undefined DEBUG preprocessor token from board config files
By default this undef is a noop, moreover at this point when the
platform support is broken is prevents debugging of U-boot by manual
insertion of #define DEBUG into common files, so it makes sense to
remove the option from all SH boards as a harmful one.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-12-02 21:32:49 -05:00
Vladimir Zapolskiy
3f8b5391ec sh4: use single u-boot linker script for all boards
Three supported SH4/SH4A boards with the bootloader image stored on
SPI flash have own flavour of a linker script, in turn they are equal
among each other. The only difference is that the text from
lowlevel_init.o is placed right after start.o, which makes sense.

Note that .bss section is not marked as NOLOAD, because for about
10 years this is a default option of a GNU linker, either the
attribute is found or not the resulting image file is the same.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-12-02 21:32:46 -05:00
Vladimir Zapolskiy
7652704722 r2dplus: use P1 area space for text base and PCI system memory
While both options are acceptable use P1 area physical addresses
instead of external memory space of text base and PCI system memory
for unification purposes, all other supported superh boards have the
same selection.

This allows to easily ensure that CONFIG_SYS_TEXT_BASE is located
within available DRAM.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-12-02 21:32:45 -05:00
Vladimir Zapolskiy
b032eb1f71 sh4: remove __io config options from r2dplus and r7780mp boards
Defined __io is no-op for the SH architecture and it can be removed
from board files without any functional change.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-12-02 21:32:44 -05:00
Sekhar Nori
7e0b87c91a ARM: am57xx_evm: enable DFU support
AM57xx GP EVM has USB2 port of the SoC exposed as
USB client port.

It is useful to be able to use this port for USB
DFU downloads.

Enable USB DFU support. Tested on AM57x GP EVM Rev
A3 using DFU to download to connected SD card.

configs for HS version of the AM57x EVM are
included in the patch but not really tested.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-02 21:32:37 -05:00
Sekhar Nori
f843770a6a ARM: ti: consolidate dfu environment variables
Introduce include/environment/ti/dfu.h that
consolidates environment variable definitions
for various TI boards that support DFU today.

Tested on AM335x EVM, AM437x SK EVM and DRA74x
EVM by using DFU to write to SD card.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-02 21:32:37 -05:00
York Sun
f4325b47a8 powerpc: mpc86xx: Move CONFIG_FSL_LAW to Kconfig
Clean up existing definitions and drop from white list.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-12-02 12:38:42 -08:00
York Sun
05cb79a72c powerpc: mpc85xx: Move CONFIG_FSL_LAW to Kconfig
Some header files have this macro defined conditionally and
redefined unconditionally. Remove all existing definitions.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-12-02 12:38:42 -08:00
York Sun
4a1e6810a2 powerpc: mpc86xx: Convert CONFIG_SYS_CCSRBAR_DEFAULT to Kconfig option
Move default value definitions to Kconfig SYS_CCSRBAR_DEFAULT.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-12-02 08:52:34 -08:00
Masahiro Yamada
e3e18bea64 ARM: zynq(mp): remove unneeded CONFIG_USB_MAX_CONTROLLER_COUNT defines
ARCH_ZYNQ(MP) selects DM_USB, where CONFIG_USB_MAX_CONTROLLER_COUNT
is not used.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Moritz Fischer <moritz.fischer@ettus.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-12-02 14:36:01 +01:00
Tom Rini
4d6647ab17 Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2016-11-30 09:57:52 -05:00
Christoph Fritz
730d25443a mx6sx: Add initial support for Samtec VIN|ING 2000 board
This patch adds initial support for Samtec VIN|ING 2000 board.

Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Acked-by: Marek Vasut <marex@denx.de>
2016-11-30 09:54:42 +01:00
Tom Rini
6b29a395b6 Merge git://git.denx.de/u-boot-mpc85xx 2016-11-29 19:42:48 -05:00
Angus Ainslie
9cd37b02a0 imx7: SPI: add suport for SPI flash in mikroBUS slot
Enable the escpi3 nets attached to the mikroBUS slot
on the i.MX7 Sabre evalution board. Also enble the SPI flash
commands to work with the "flash click" board.

This is V2 of this patch with changes recommended by the maintainer

CC: Jagan Teki <jteki@openedev.com>
2016-11-29 17:00:31 +01:00
Stefan Agner
0405092bd2 arm: mx6: specify SPL padding
Specify standard padding for payload to 68KB. This is derived from
the maximum header size plus maximum SPL size. It matches the
already defined offset for SD/eMMC devices (69KB) too. This allows
to use the u-boot-with-spl.imx build target to generate a directly
flashable image which can be flashed using:

  dd if=u-boot-with-spl.imx of=/dev/mmcblk0 bs=512 skip=2

While the patch has been created with SD/eMMC in mind, this also
works with other boot media. The board file needs to configure the
media specific (absolute) payload offset accordingly. Especially
the IVT offset is boot media specific and can be retrieved from the
reference manual (Table 8-25. Image Vector Table Offset and Initial
Load Region Size). For NAND boot a define like this should do the
job:

 #define CONFIG_SYS_NAND_U_BOOT_OFFS (SPL_PAD_TO + 0x400)

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2016-11-29 16:59:37 +01:00
Breno Lima
792f186846 mx6sx: Add initial support for UDOO Neo Board
UDOO Neo Board is a development board from Seco that has three models:
 - UDOO Neo Basic
 - UDOO Neo Basic Kick Starter
 - UDOO Neo Extended
 - UDOO Neo Full

All versions are based on the i.MX6 SoloX processor.

For more details about the UDOO Neo board, please refer to:
http://www.udoo.org/udoo-neo/

This work is based on a previous commit of Francesco Montefoschi
<francesco.monte@gmail.com>:
877b71184a

Only tested on the UDOO Neo Full board.

Signed-off-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-11-29 16:48:20 +01:00
Sanchayan Maity
3ed82d6f9b colibri_vf: Read kernel and device tree from static UBI volumes
Our update scripts write the kernel and device tree in seperate
UBI volumes. This allows to use a lot less UBI/UBIFS support in
U-Boot, which should lower the risk of hitting bugs in this area.

Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
2016-11-29 16:47:47 +01:00
Sebastien Bourdelin
d9e268ed76 ARM: ts4600: add basic board support
This commit adds basic support including:
MMC, Serial console

Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-11-29 16:45:48 +01:00
Sven Ebenfeld
36c0627ba5 arm: imx: wandboard: fix compile error if CONFIG_VIDEO is deactivated
When I tried to deactivate VIDEO support for the Wandboard, it still
tried to initialize the Framebuffer and so on. That is the reason for
the added ifdefs. CONFIG_VIDEO is enabled in the configuration as default
and therefore nothing changes for the default user.

The structs mx6dl_i2c2_pad_info and mx6q_i2c2_pad_info are only available
when CONFIG_IPUV3 are set and should not be tried to access, when that
define is not defined.

Signed-off-by: Sven Ebenfeld <sven.ebenfeld@gmail.com>
2016-11-29 16:34:56 +01:00
Stefano Babic
2d221489df Merge branch 'master' of git://git.denx.de/u-boot
Signed-off-by: Stefano Babic <sbabic@denx.de>
2016-11-29 16:28:28 +01:00
Alexander Graf
8b82dd9add bcm2835 video: Map frame buffer as 32bpp
To enable working efifb support, let's map the frame buffer as 32bpp
instead of 16bpp.

Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
2016-11-28 20:15:20 -05:00
Fabian Vogt
d8396a3272 board: rpi: move uart deactivation to board_init
When using OF_CONTROL, the disabled value of the mini UART platdata
gets reset after board_early_init_f. So move detection and disabling
to board_init and remove board_early_init_f.
This uses the first device using the mini uart driver, as this method
works reliably with different device trees or even no device tree at all.

Signed-off-by: Fabian Vogt <fvogt@suse.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-11-28 20:09:51 -05:00
Stefan Agner
5991703e88 spl: dfu: move DFU Kconfig to SPL Kconfig
The DFU Kconfig menu entries should be part of the SPL
Kconfig file. Also avoid using the top level Makefile by
moving the config dependent build artifacts to the driver/
and driver/usb/gadget/ Makfiles.

With that, DFU can be built again in SPL if
CONFIG_SPL_DFU_SUPPORT is enabled.

Fixes: 6ad6102246 ("usb:gadget: Disallow DFU in SPL for now")

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
2016-11-28 19:49:49 -05:00
Andrew F. Davis
979a1f8b21 ti_armv7_keystone2: env: Add NFS loading support for PMMC and MON
NFS loading support has been added to the default environment for
most boot components, as PMMC and MON loading were added later they
did not originally get the NFS commands added, add these now.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-11-28 15:10:35 -05:00
Andrew F. Davis
ac34286647 keystone2: Move target selection to Kconfig
The config option TARGET_K2x_EVM is set by the k2x defconfigs to pick
a board target, but the header configs also set K2x_EVM. This config
is redundant, remove it and use TARGET_K2x_EVM everywhere in its place.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-11-28 15:10:34 -05:00
Max Krummenacher
877ea607a8 colibri_vf: usb gadget: toradex pid is now set generically
remove now unused CONFIG_TRDX_PID_XXX

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
2016-11-28 15:10:33 -05:00
Marcel Ziswiler
74b19ad1c1 apalis/colibri_t30: move environment location
Now with the config block handling in place move the U-Boot environment
location before the config block at the end of 1st "boot sector" as
deployed during production using our downstream BSP.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
2016-11-28 15:10:33 -05:00
Marcel Ziswiler
b891d01038 apalis/colibri_imx7/pxa270/t20/t30/vf: integrate config block handling
With our common code in place actually make use of it across all our
modules.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
2016-11-28 15:10:33 -05:00
Emmanuel Vadot
ae042beb74 sunxi: mmc: Set CONFIG_SYS_MMC_MAX_DEVICE
Set CONFIG_SYS_MMC_MAX_DEVICE to 4 for sunxi SoC.
This define is needed in the API code.

Signed-off-by: Emmanuel Vadot <manu@bidouilliste.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-11-28 15:10:29 -05:00
Tom Rini
8d0898544e Merge git://git.denx.de/u-boot-rockchip 2016-11-26 09:26:27 -05:00
Jacob Chen
6b388f0bed rockchip: configs: correct partitions 'boot' size
It should be 112M, to make rootfs start at 0x40000

Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-11-25 17:59:32 -07:00
Simon Glass
5e9b15034b rockchip: Rename jerry files to veyron
At present we have a single rk3288-based Chromebook: chromebook_jerry. But
all such Chromebooks can use the same binary with only device-tree
differences. The family name is 'veyron', so rename the files accordingly.

Also update the device-tree filename since this currently differs from
Linux.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-11-25 17:59:31 -07:00
Kever Yang
1e352124b9 config: rk3036: enable configs for USB HOST
rk3036 using dwc2 usb controller, need enable relate configs for it.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-11-25 17:59:29 -07:00
Tom Rini
ed77ccd014 Merge git://git.denx.de/u-boot-fsl-qoriq
Signed-off-by: Tom Rini <trini@konsulko.com>

Conflicts:
	arch/arm/Kconfig
2016-11-25 17:39:54 -05:00
York Sun
37376ae0dc powerpc: MPC8641HPCN: Remove macro CONFIG_MPC8641HPCN
Use TARGET_MPC8641HPCN from Kconfig instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:16 -08:00
York Sun
4f5554c6e5 powerpc: MPC8641: Remove macro CONFIG_MPC8641
Replace CONFIG_MPC8641 with ARCH_MPC8641 in Kconfig and clean up
existing macros.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:16 -08:00
York Sun
51f05ff914 powerpc: MPC8610HPCD: Remove macro CONFIG_MPC8610HPCD
Use TARGET_MPC8610HPCD from Kconfig instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:16 -08:00
York Sun
1425a87b14 powerpc: MPC8610: Remove macro CONFIG_MPC8610
Replace CONFIG_MPC8610 with ARCH_MPC8610 in Kconfig and clean up
existing macros.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:16 -08:00
York Sun
26bc57da0a powerpc: T4240: Remove macro CONFIG_PPC_T4240
Use CONFIG_ARCH_T4240 from Kconfig instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:15 -08:00
York Sun
49ec8aa840 powerpc: T4240RDB: Remove macro CONFIG_T4240RDB
Use CONFIG_TARGET_T4240RDB instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:15 -08:00
York Sun
673c01c708 powerpc: T4240QDS: Remove macro CONFIG_T4240QDS
Use CONFIG_TARGET_T4240QDS instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:15 -08:00
York Sun
0f3d80e993 powerpc: T2080, T2081: Remove macro CONFIG_PPC_T2080 and CONFIG_PPC_T2081
Use CONFIG_ARCH_T2080 and CONFIG_ARCH_T2081 instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:15 -08:00
York Sun
78e5699523 powerpc: T104xRDB: Remove macro CONFIG_T104xRDB and T104xD4RDB
CONFIG_T104xRDB is defined in T104xRDB.h, so it is always enabled for
all T1040RDB, T1040D4RDB, T1042RDB, T1042D4RDB, T1042RDB_PI.
CONFIG_T104XD4RDB is defined for all T1040D4RDB, T1042D4RDB.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:14 -08:00
York Sun
0167369cff powerpc: T1042RDB: Remove macro CONFIG_T1042RDB
Use TARGET_T1042RDB instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:14 -08:00
York Sun
319ed24a8a powerpc: T1042D4RDB: Separate from T1042RDB in Kconfig
Use TARGET_T1042D4RDB in Kconfig to simplify config options.
Remove macro CONFIG_T1042D4RDB.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:14 -08:00
York Sun
55ed8ae367 powerpc: T1042RDB_PI: Split from T1042RDB in Kconfig
Use separated TARGET_T1042RDB_PI to simplify config options.
Remove macro CONFIG_T1042RDB_PI.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:14 -08:00
York Sun
6fcddd0985 powerpc: T1040RDB: Remove macro CONFIG_T1040RDB
Use CONFIG_TARGET_T1040RDB instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:13 -08:00
York Sun
a016735c79 powerpc: T1040D4RDB: Separate from T1040RDB in Kconfig
Use TARGET_T1040D4RDB in Kconfig to simplify config macros. Replace
CONFIG_T1040D4RDB with TARGET_T1040D4RDB and clean up existing macros.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:13 -08:00
York Sun
5d73701073 powerpc: T1040: Remove macro CONFIG_PPC_T1040
Replace CONFIG_PPC_T1040 with ARCH_T1040 in Kconfig and clean up
existing macros.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:13 -08:00
York Sun
e5d5f5a8be powerpc: T1024: Remove macro CONFIG_PPC_T1024
Replace CONFIG_PPC_T1024 with ARCH_T1024 in Kconfig and clean up
existing macros.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:13 -08:00
York Sun
10343403af powerpc: QEMU_E500: Remove macro CONFIG_QEMU_E500
Replace CONFIG_QEMU_E500 with ARCH_QEMU_E500 in Kconfig and
clean up existing macros.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:12 -08:00
York Sun
b41f192b67 powerpc: B4420: Remove macro CONFIG_PPC_B4420
Replace CONFIG_PPC_B4420 with ARCH_B4420 in Kconfig and clean up
existing macros.
2016-11-23 23:42:12 -08:00
York Sun
d46a4a1378 powerpc: B4860QDS: Remove macro CONFIG_B4860QDS
Use CONFIG_TARGET_B4860QDS instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:12 -08:00
York Sun
3006ebc37e powerpc: B4860: Remove macro CONFIG_PPC_B4860
Replace CONFIG_PPC_B4860 with ARCH_B4860 in Kconfig and clean up
existing macros.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:12 -08:00
York Sun
161b472482 powerpc: P5040DS: Remove macro CONFIG_P5040DS
Use CONFIG_TARGET_P5040DS instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:11 -08:00
York Sun
9539036012 powerpc: P5040: Remove macro CONFIG_P5040
Replace CONFIG_P5040 with ARCH_P5040 in Kconfig and clean up
existing macros.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:11 -08:00
York Sun
3b83649d53 powerpc: P5020DS: Remove macro CONFIG_P5020DS
Use CONFIG_TARGET_P5020DS instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:11 -08:00
York Sun
cefe11cdb2 powerpc: P5020: Remove macro CONFIG_PPC_P5020
Replace CONFIG_PPC_P5020 with ARCH_P5020 in Kconfig and clean up
existing macros.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:11 -08:00
York Sun
529fb06208 powerpc: P4080DS: Remove macro CONFIG_P4080DS
Use CONFIG_TARGET_P4080DS instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:11 -08:00
York Sun
e71372cb63 powerpc: P4080: Remove macro CONFIG_PPC_P4080
Replace CONFIG_PPC_P4080 with ARCH_P4080 in Kconfig and clean up
existing macros.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:11 -08:00
York Sun
850af2c7a9 powerpc: P3041DS: Remove macro CONFIG_P3041DS
Use CONFIG_TARGET_P3041DS instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:11 -08:00
York Sun
5e5fdd2d00 powerpc: P3041: Remove macro CONFIG_PPC_P3041
Replace CONFIG_PPC_P3041 with ARCH_P3041 in Kconfig and clean up
existing macros.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:10 -08:00
York Sun
37107facbc powerpc: P2041RDB: Remove macro CONFIG_P2041RDB
Use CONFIG_TARGET_P2041RDB instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:10 -08:00
York Sun
ce040c83f1 powerpc: P2041: Remove macro CONFIG_PPC_P2041
Replace CONFIG_PPC_P2041 with ARCH_P2041 in Kconfig and clean up
existing macros.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:10 -08:00
York Sun
4593637b13 powerpc: P2020: Remove macro CONFIG_P2020
Replace CONFIG_P2020 with ARCH_P2020 in Kconfig and clean up
existing macros.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:10 -08:00
York Sun
4167a67d5d powerpc: P1025: Remove macro CONFIG_P1025
Replace CONFIG_P1025 with ARCH_P1025 in Kconfig and clean up
existing macros.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:10 -08:00
York Sun
52b6f13d2c powerpc: P1024: Remove CONFIG_P1024
Replace CONFIG_P1024 with ARCH_P1024 in Kconfig and clean up
existing macros.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:10 -08:00
York Sun
a990799d52 powerpc: P1021: Remove macro CONFIG_P1021
Replace CONFIG_P1021 with ARCH_P1021 in Kconfig and clean up
existing macros.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:09 -08:00
York Sun
484fff6478 powerpc: P1020: Remove macro CONFIG_P1020
Replace CONFIG_P1020 with ARCH_P1020 in Kconfig and clean up
existing macros.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:09 -08:00
York Sun
8435aa777e powerpc: P2020RDB-PC: Separate from P1_P2_RDB_PC in Kconfig
Use TARGET_P2020RDB_PC instead of sharing with P1_P2_RDB_PC to
simplify Kconfig and config macros.

Remove macro CONFIG_P2020RDB.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:09 -08:00
York Sun
b0c98b4b9f powerpc: P1025RDB: Separate from P1_P2_RDB_PC in Kconfig
Use TARGET_P1025RDB instead of sharing with P1_P2_RDB_PC to
simplify Kconfig and config macros.

Remove macro CONFIG_P1025RDB.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:09 -08:00
York Sun
4eedabfe93 powerpc: P1024RDB: Separate from P1_P2_RDB_PC in Kconfig
Use TARGET_P1024RDB instead of sharing with TARGET_P1_P2_RDB_PC to
simplify Kconfig and macros.

Remove macro CONFIG_P1024RDB.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:09 -08:00
York Sun
da439db35a powerpc: P1021RDB: Separate from P1_P2_RDB_PC in Kconfig
Use TARGET_P1021RDB instead of sharing with TARGET_P1_P2_RDB_PC to
simplify Kconfig and macros.

Remove macro CONFIG_P1021RDB.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:09 -08:00
York Sun
e9bc8a8fc1 powerpc: P1020UTM: Separate from P1_P2_RDB_P2 in Kconfig
Use TARGET_P1020UTM instead of sharing with TARGET_P1_P2_RDB_PC
to simplify Kconfig and config macros.

Remove macro CONFIG_P1020UTM.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:08 -08:00
York Sun
f404b66ce1 powerpc: P1020RDB-PD: Separate from P1_P2_RDB_PC in Kconfig
Use TARGET_P1020RDB_PD instead of sharing with P1_P2_RDB_PC
to simplify Kconfig and config macros.

Remove macro CONFIG_P1020RDB_PD.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:08 -08:00
York Sun
aa14620c2e powerpc: P1020RDB-PC: Separate from P1_P2_RDB_PC in Kconfig
Use TARGET_P1020RDB_PC instead of sharing with TARGET_P1_P2_RDB_PC
to simplify Kconfig and config macros.

Remove macro CONFIG_P1020RDB_PC.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:08 -08:00
York Sun
fedae6ebaf powerpc: P1020MBG: Separate from P1_P2_RDB_PC in Kconfig
Use TARGET_P1020MBG instead of sharing with TARGET_P1_P2_RDB_PC to
simplify Kconfig and other macros.

Remove macro CONFIG_P1020MBG.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:08 -08:00
York Sun
9bb1d6bcd2 powerpc: P1023: Remove macro CONFIG_P1023
Replace CONFIG_P1023 with ARCH_P1023 in Kconfig and clean up existing
macros.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:07 -08:00
York Sun
aa6e241a4c powerpc: P1022DS: Remove macro CONFIG_P1022DS
Use CONFIG_TARGET_P1022DS instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:07 -08:00
York Sun
feb9e25bc7 powerpc: P1022: Remove macro CONFIG_P1022
Replace CONFIG_P1022 with ARCH_P1022 in Kconfig and clean up existing
macros.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:07 -08:00
York Sun
7601686c60 powerpc: P1010RDB: Remove macros CONFIG_P1010RDB_PA and CONFIG_P1010RDB_PB
Remove CONFIG_P1010RDB_PA and CONFIG_P1010RDB_PB and split TARGET_P1010RDB
to TARGET_P1010RDB_PA and TARGET_P1010RDB_PB in Kconfig.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:07 -08:00
York Sun
7d5f9f84f1 powerpc: P1010: Remove macro CONFIG_P1010
Replace CONFIG_P1010 with ARCH_P1010 in Kconfig and clean up existing
macros.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:07 -08:00
York Sun
164b2f812b powerpc: xpedite: Remove macro CONFIG_XPEDITE5370
This macro is no longer used.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:06 -08:00
York Sun
2fe0cd8582 powerpc: MPC8572DS: Remove macro CONFIG_MPC8572DS
Use CONFIG_TARGET_MPC8572DS instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:06 -08:00
York Sun
c8f48474bc powerpc: MPC8572: Remove macro CONFIG_MPC8572
Replace CONFIG_MPC8572 with ARCH_MPC8572 in Kconfig and clean up existing
macros.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:06 -08:00
York Sun
3759b5b649 powerpc: MPC8569MDS: Remove macro CONFIG_MPC8569MDS
Use CONFIG_TARGET_MPC8569MDS instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:06 -08:00
York Sun
23b36a7d48 powerpc: MPC8569: Remove macro CONFIG_MPC8569
Replace CONFIG_MPC8569 with ARCH_MPC8569 in Kconfig and clean up existing
macros.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:06 -08:00
York Sun
8d85448699 powerpc: MPC8568MDS: Remove macro CONFIG_MPC8568MDS
This macro is no longer used.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:06 -08:00
York Sun
d07c384310 powerpc: MPC8568: Remove macro CONFIG_MPC8568
Replace CONFIG_MPC8568 with ARCH_MPC8568 in Kconfig and clean up existing
macros.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:06 -08:00
York Sun
87499e938d powerpc: MPC8560ADS: Remove macro CONFIG_MPC8560ADS
This macro is no longer used.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:05 -08:00
York Sun
99d0a3123e powerpc: MPC8560: Remove macro CONFIG_MPC8560
Replace CONFIG_MPC8560 with ARCH_MPC8560 in Kconfig and clean up existing
macros.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:05 -08:00
York Sun
2f2d54b7cd powerpc: MPC8555CDS: Remove macro CONFIG_MPC8555CDS
Use CONFIG_TARGET_MPC8555CDS instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:05 -08:00
York Sun
3c3d8ab58d powerpc: MPC8555: Remove macro CONFIG_MPC8555
Replace CONFIG_MPC8555 with ARCH_MPC8555 in Kconfig and clean up existing
macros.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:05 -08:00
York Sun
4096f350d5 powerpc: MPC8541CDS: Remove macro CONFIG_MPC8541CDS
Replace with CONFIG_TARGET_MPC8541CDS from Kconfig.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:05 -08:00
York Sun
3aff30825e powerpc: mpc8541: Remove macro CONFIG_MPC8541
Replace CONFIG_MPC8541 with ARCH_MPC8541 in Kconfig and clean up existing
macros.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:05 -08:00
York Sun
1ac8e0709e powerpc: MPC8540ADS: Remove macro CONFIG_MPC8540ADS
This macro is no longer used.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:05 -08:00
York Sun
7f825218dc powerpc: mpc8540: Remove macro CONFIG_MPC8540
Replace CONFIG_MPC8540 with ARCH_MPC8540 in Kconfig and clean up existing
macros.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:04 -08:00
York Sun
30411e7cfc powerpc: MPC8536DS: Remove macro CONFIG_MPC8536DS
Use CONFIG_TARGET_MPC8536DS instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:04 -08:00
York Sun
24ad75ae55 powerpc: MPC8536: Move CONFIG_MPC8536 to Kconfig option
Replace CONFIG_MPC8536 with ARCH_MPC8536 in Kconfig and clean up existing
macros.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:04 -08:00
York Sun
4fd64746b0 powerpc: C29X: Move CONFIG_PPC_C29X to Kconfig option
Replace CONFIG_PPC_C29X with ARCH_C29X in Kconfig and clean up existing
macros.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:04 -08:00
York Sun
115d60c0cf powerpc: BSC9131/2: Move CONFIG_BSC9131/2 to Kconfig options
Replace CONFIG_BSC9131, CONFIG_BSC9132 with ARCH_BSC9131, ARCH_BSC9132
Kconfig options.

Also drop #ifdef in BSC9131RDB.h since it is redundant.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:03 -08:00
York Sun
ae59dded8d powerpc: MPC8544DS: Remove macro CONFIG_MPC8544DS
Use CONFIG_TARGET_MPC8544DS instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:03 -08:00
York Sun
25cb74b30a powerpc: MPC8544: Move CONFIG_MPC8544 to Kconfig option
Replace CONFIG_MPC8544 with ARCH_MPC8544 in Kconfig.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:03 -08:00
York Sun
4d08d5d9d5 powerpc: MPC8548CDS: Remove macro CONFIG_MPC8548CDS
Use CONFIG_TARGET_MPC8548CDS instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:03 -08:00
York Sun
281ed4c74b powerpc: MPC8548: Move CONFIG_MPC8548 to Kconfig option
Replace CONFIG_MPC8548 with ARCH_MPC8548 in Kconfig.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:03 -08:00
York Sun
f9dd8553f3 armv7: ls1021aiot: Fixing SPL compiling issues
To align with SPL change 38fed8ab and 693d4c9f, add Kconfig option
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to defconfig, and remove
CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS.

Signed-off-by: York Sun <york.sun@nxp.com>
CC: Feng Li <feng.li_2@nxp.com>
2016-11-23 10:39:41 -08:00
Marcel Ziswiler
136179bec1 colibri_pxa270: transition to driver model for serial
Add serial platform data to board file.
Enable driver model for PXA serial driver.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2016-11-23 13:53:20 +01:00
Marcel Ziswiler
fc127d184a colibri_pxa270: drop edit, elf, fpga, hush, regex et al. for space reason
With em humble DM and Kconfig migraters U-Boot binary size keeps
increasing. Drop a bunch of less needed stuff to save another precious
20+ KB.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2016-11-23 13:53:20 +01:00
Marcel Ziswiler
d804a5e1c3 serial: pxa: use kconfig for serial configuration
Migrate the PXA serial driver to be configured via Kconfig.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2016-11-23 13:53:20 +01:00
Thomas Abraham
95e74a3df7 arm: exynos7420: remove custome low level init function
Remove the custom low-level initialization function and reuse the
default low-level initialization function. But this requires the
ARMV8_MULTIENTRY config option to be enabled for Exynos7420.

On Exynos7420, the boot CPU belongs to the second cluster and so
with ARMV8_MULTIENTRY config option enabled, the 'branch_if_master'
macro fails to detect the CPU as boot CPU. As a temporary workaround
the CPU_RELEASE_ADDR is set to point to '_main'.

Cc: Minkyu Kang <mk7.kang@samsung.com>
Cc: Alison Wang <alison.wang@nxp.com>
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Reviewed-by: Alison Wang <alison.wang@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-11-22 11:40:24 -08:00
Adam Ford
12262340d5 ARM: OMAP3_LOGIC: Update MTD Partition Table
The previous partition table did not support a separate device tree
and the kernel size was limited to 4MB.  This update shows the
location of the device tree (labeled as spl-os) for those who
want to use Falcon Mode or use U-Boot to store the Flattened
Device Tree (FDT) to NAND without appending it to the kernel.

This also grows the kernel to 6MB since 4MB was becomming tight

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-11-21 14:07:33 -05:00
Adam Ford
b15e7c1727 ARM: OMAP3_LOGIC: Fix SPL Memory Map for Falcon Mode
The memory map defined in commit ("49c7303f0e52: OMAP3: Enable SPL
on omap3_logic) was used by a copy-paste of another board without
fully understanding how the map works in Falcon mode.  This patch
undoes the customization and uses the default SPL Memory Map
for OMAP3.

When building the uImage, set LOADADDR=0x82000000 and Falcon
mode should properly load.

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-11-21 14:07:32 -05:00
Tom Rini
187f9dc3f7 TI: Remove CONFIG_OMAP_COMMON in favor of CONFIG_ARCH_OMAP2
With the move to arch/arm/mach-omap2 there are now very few uses of
CONFIG_OMAP_COMMON and further they can all be replaced with
CONFIG_ARCH_OMAP2, so do so.

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-11-21 14:07:29 -05:00
Tom Rini
983e37007d arm: Introduce arch/arm/mach-omap2 for OMAP2 derivative platforms
This moves what was in arch/arm/cpu/armv7/omap-common in to
arch/arm/mach-omap2 and moves
arch/arm/cpu/armv7/{am33xx,omap3,omap4,omap5} in to arch/arm/mach-omap2
as subdirectories.  All refernces to the former locations are updated to
the current locations.  For the logic to decide what our outputs are,
consolidate the tests into a single config.mk rather than including 4.

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-11-21 14:07:29 -05:00
Semen Protsenko
4886de7608 arm: dra7xx: Unify Android partition table
Make Android partition table the same as for AM57x EVM.

  1. Make "bootloader" partition start from 0x300 sectors offset, so
     DRA7 is bootable in Android mode (see
     CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR option).
  2. Increase "bootloader" partition size, because size of u-boot.img is
     about 632 KiB (when building DT defconfig, with FIT image enabled).
  3. Specify "reserved" partition explicitly, rather than specifying
     "efs" partition start. Reserved area will be used to store U-Boot
     environment on eMMC. It's convenient to have it exposed explicitly
     so we can read/write U-Boot environment.
  4. Keep all Android partitions locations intact, by reducing
     "reserved" partition size. CONFIG_ENV_SIZE is considered.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2016-11-21 14:07:26 -05:00
Semen Protsenko
b52ee279ca arm: am57xx: Enable 8-bit eMMC access
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2016-11-21 14:07:26 -05:00
Semen Protsenko
a42cfa4f82 arm: am57xx: Define Android partition table
"fastboot oem format" command reuses "gpt write" command, which in turn
requires correct partitions defined in $partitions variable. This patch
adds such definition of Android partitions for DRA7XX EVM board.

By default $partitions variable contains Linux partition table. In order
to prepare Android environment one can run next commands from U-Boot
shell:

    => env set partitions $partitions_android
    => env save

After those operations one can go to fastboot mode and perform
"fastboot oem format" to create Android partition table.

While at it, enable CONFIG_RANDOM_UUID to spare user from providing
UUIDs for each partition manually.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2016-11-21 14:07:25 -05:00
Guillaume GARDET
c721fd6ee0 omap3_beagle: use config_distro_bootcmd
Add support for distro_bootcmd on MMC and fall back to prior
behavior if distro_bootcmd fails.

Tested on Beagleboad xM to boot GRUB2 (and then Linux kernel) in EFI mode
from MMC.

Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr>
Cc: Tom Rini <trini@konsulko.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-11-21 14:07:25 -05:00
Semen Protsenko
ada03c3c3d ti_omap5_common: Respect USB controller number in fastboot
On "fastboot reboot-bootloader" we check "dofastboot" variable and do
"fastboot 0" command in U-Boot if it's 1. But there are boards which have
USB controller number other than 0, so it should be respected when
performing "fastboot" command.

This patch reuses CONFIG_FASTBOOT_USB_DEV option toprovide correct USB
controller number to "fastboot" command.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-11-21 13:59:26 -05:00
Shaohui Xie
fdc2b54cb8 armv8: ls1046aqds: add lpuart support
LPUART0 is used by default, and it's using platform clock.

Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-11-21 09:20:32 -08:00
Feng Li
20c700f8da armv7: Add support of ls1021a-iot board
The patch adds support for Freescale ls1021a-iot board.

Signed-off-by: Feng Li <feng.li_2@nxp.com>
[YS: rewrite commit message, fix whitespace in Kconfig]
Reviewed-by: York Sun <york.sun@nxp.com>
2016-11-21 09:20:32 -08:00
Yuan Yao
21640db51b configs: ls2080ardb: Enable DSPI flash support
There is the stmicro DSPI flash on LS12080ARDB.
Enable DSPI flash related configure options.

Signed-off-by: Yuan Yao <yao.yuan@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-11-21 09:20:32 -08:00
Pratiyush Srivastava
185e586dac armv8:ls1012a: Update bootargs for fast-boot
Add optimization parameters like "quiet" in bootargs to reduce the system
boot time

Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com>
Signed-off-by: Harninder Rai <harninder.rai@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-11-21 09:20:32 -08:00
Semen Protsenko
693d4c9f1d spl: Remove CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS
This option isn't used for anything, so get rid of it.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2016-11-18 21:20:59 -05:00
Semen Protsenko
38fed8abe7 spl: Convert CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to Kconfig
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
[trini: Fix sniper and kc1 migration]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-11-18 21:20:58 -05:00
Tom Rini
9e40ea04e9 Patch queue for efi - 2016-11-17
Highlights this time around:
 
   - x86 efi_loader support
   - hello world efi test case
   - network device name is now representative
   - terminal output reports modes correctly
   - fix psci reset for ls1043/ls1046
   - fix efi_add_runtime_mmio definition for x86
   - efi_loader support for ls2080
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJYLa6qAAoJECszeR4D/txgF+4QAKpHJXY/1V+McEsLga2iwePZ
 lZu5NuuLeDA9IMH+ufOOGxDIoc/llZCTsqw5l8Vnkaz0JEH6v9svyEy4zC1Nqtj2
 r4pOhGLAyVlGAh4O3hFFi/eHNEDyTrMoPO6JCy8ce+fEGE21VBlWed0+/c/KdV7F
 85joTg3X+6htFMkLybzKZS1yiJyoROe7zUZdzPrn4ogwDGbazmYbED+P2u09dDzB
 WjlpIbmEDWJEska6Cbgl/ee6dBXSVl8Q/SY3V77T5TB554sZozrKDsNUehiUMEbh
 ggCT5VzPhsm4gb/7RBpTqqCabBT5ml8iKfB8Y7fwL43sDiMXJ1LgJyVnHuz65sCS
 aPPsPjQujBSiqr+k/571yhgFNLVydrs9IYNumZr+Li4UZCvx3xtCjACJVYkbLUd1
 SZrpKts0V45nZcE4IoiwDKOUxavUbLEef2SJTOAOppB3DG9L3O0TWkyH00hTkaxR
 oDIVNSZPt9wSd4Q7FQ2MYxQ/sk+B6PrN6Gm/NMSfCnvP8DkyTzHo514qrWnEjlhQ
 ndVmyJh3hpipNDfFDeF6r5lLtPkTrzNxOVZcsUGQC5jvrvwLWguD+Kuv9Qq4gSDp
 uDawZmRwDGEGpR/yJhqj8r6/e7bZ0fOE6nPqbWLlyF+Oc4yFTz+D2CNPGR4CR0iF
 DFGQN/lNkYbu+HfyZOFO
 =xmR3
 -----END PGP SIGNATURE-----

Merge tag 'signed-efi-next' of git://github.com/agraf/u-boot

Patch queue for efi - 2016-11-17

Highlights this time around:

  - x86 efi_loader support
  - hello world efi test case
  - network device name is now representative
  - terminal output reports modes correctly
  - fix psci reset for ls1043/ls1046
  - fix efi_add_runtime_mmio definition for x86
  - efi_loader support for ls2080
2016-11-17 11:46:45 -05:00
Alexander Graf
b99ebaf9f0 ls2080ardb: Convert to distro boot
Most new systems in U-Boot these days make use of the generic "distro"
framework which allows a user to have U-Boot scan for a bootable OS
on all available media types.

This patch extends the LS2080ARDB board to use that framework if the
hard coded NOR flash location does not contain a bootable image.

Signed-off-by: Alexander Graf <agraf@suse.de>
2016-11-17 14:18:56 +01:00
Heiko Schocher
45a3ad81fa mx35: adjust default environment for flea3 board
Signed-off-by: Stefano Babic <sbabic@denx.de>
Signed-off-by: Heiko Schocher <hs@denx.de>
2016-11-16 20:53:55 +01:00
Siva Durga Prasad Paladugu
913a6eeb55 ARM64: zynqmp: Correct the sdhci minimum frequency for ep108
Correct the sdhci minimum frequency for ep platform.
It should be right shift instead of left shift operand.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15 15:30:34 +01:00
Siva Durga Prasad Paladugu
ba8adb26a0 zynq: nand: Enable Nand flash controller driver a zynq board
Enable zynq Nand flash controller driver for a zynq ZC770
XM011(dc2) board.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15 15:27:50 +01:00
Mike Looijmans
2d48caa47d ARM: zynq: Add support for the topic-miami system-on-modules and carrier boards
The topic-miami SoMs contain a Zynq xc7z015 or xc7z030 SoC, 1GB DDR3L RAM,
32MB QSPI NOR flash and 256MB NAND flash.

The topic-miamiplus SoMs contain a Zynq xc7z035, xc7z045 or xc7z100 SoC,
2x 1GB DDR3L RAM, 64MB dual-parallel QSPI flash, clock sources
and a fan controller.

The "Florida" carrier boards add SD, USB, ethernet and other interfaces.

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15 15:27:50 +01:00
Marcel Ziswiler
eb9e699ff1 colibri_pxa270: drop lzma support for space reason
As the upcoming driver model integration takes up some more precious flash
space first make sure to drop expensive LZMA support.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2016-11-05 07:27:43 -04:00
Tom Rini
7fd117389e Merge git://git.denx.de/u-boot-rockchip 2016-11-02 09:41:20 -04:00
Adam Ford
760d1afdcc OMAP3: omap3_logic: Add scripts to boot over network.
Not all networks have a DHCP server configured properly, so these
scripts make it easier to boot in that scenario.

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-31 10:13:15 -04:00
Adam Ford
247dbda838 OMAP3: omap3_logic: Remove LCD preboot info
The LCD isn't supported in U-Boot and the LCD is now configured in
the device tree, so this code is pointless.

V2: Eliminiate erroneous newline.

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-31 10:13:15 -04:00
Jacob Chen
7f35bbb949 rockchip: use rockchip linux partitions layout
Unify the partitions of each chip then it will be more easy for us to
write scripts, tools or guides for rockchip chips.

Those extra partitions mostly are used to be compatible with our
internal loaders (such as miniloader which was same as spl,  or
android loader then we can support dual boot)

Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2016-10-30 13:29:06 -06:00
Kever Yang
0717dde057 evb-rk3399: config: set emmc as default boot dev
rk3399 has two mmc dev controller:
mmc 0: SD card;
mmc 1: EMMC

U-Boot will scan the mmc boot device configured by CONFIG_SYS_MMC_ENV_DEV,
since evb has emmc on board, let's set the EMMC as default.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2016-10-30 13:29:06 -06:00
Sandy Patterson
60169826b7 rockchip: RK3288 needs fdt and initrd below 256M now
I am not sure why this limit is changing. But my kernel
doesn't load when it's above 256. This was testing on the
rock2 board.

Signed-off-by: Sandy Patterson <apatterson@sightlogix.com>
Updated commit subject:
Signed-off-by: Simon Glass <sjg@chromium.org>
2016-10-30 13:29:05 -06:00
Amit Singh Tomar
9d6c9d988f sunxi: A64: enable USB support
Mostly by adding MACH_SUN50I to some existing #ifdefs enable support
for the the HCI0 USB host controller on the A64.
Fix up some minor 64-bit hiccups on the way.
Add the bare minimum DT bits to the A64 .dtsi and enable the controllers
and the PHY on the Pine64.
This is limited to the first USB controller at the moment, which is
connected to the lower USB socket on the Pine64 board.
[Andre: remove unneeded defines, enable OHCI, add commit message]

Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-10-30 11:38:04 +01:00
Masahiro Yamada
6ab224da57 sunxi: remove unneeded CONFIG_USB_MAX_CONTROLLER_COUNT defines
ARCH_SUNXI selects DM_USB, where CONFIG_USB_MAX_CONTROLLER_COUNT
is not used.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-10-30 11:38:04 +01:00
Jagan Teki
aec9a0f19f sunxi: Rename CONFIG_SUNXI to CONFIG_ARCH_SUNXI
CONFIG_SUNXI -> CONFIG_ARCH_SUNXI
and removed CONFIG_SUNIX from config_whitelist.txt

Cc: Simon Glass <sjg@chromium.org>
Cc: Ian Campbell <ijc@hellion.org.uk>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jagan Teki <jteki@openedev.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-10-30 11:38:04 +01:00
Tom Rini
1df182ddf7 Merge branch 'master' of git://git.denx.de/u-boot-atmel 2016-10-28 14:14:18 -04:00
Wenyou Yang
2992dd833d board: sama5d2_xplained: Enable an early debug UART
Enable an early debug UART to debug problems when an ICE or other
debug mechanism is not available.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
2016-10-28 18:37:15 +02:00
Wenyou Yang
0daa2e1870 board: sama5d2_xplained: Set 'ethaddr' got from AT24MAC
If 'ethaddr' is not set, we will get the ethernet address from AT24MAC,
and set it to 'ethaddr' variable.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Signed-off-by: Songjun Wu <songjun.wu@microchip.com>
Reviewed-by: Andreas Bießmann <biessmann@corscience.de>
2016-10-28 18:37:15 +02:00
Wenyou Yang
6f170c4d77 board: sama5d2_xplained: Move config options to defconfigs
Move the config options from the include/configs/sama5d2_xplained.h
to configs/sama5d2_xplained_*_defconfig.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
2016-10-28 18:37:15 +02:00
Robert P. J. Day
ae5070d627 AT91: Correct misspelling of "redundent" in partition names
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
2016-10-28 18:37:14 +02:00
Tom Rini
4f892924d2 Merge branch 'master' of git://www.denx.de/git/u-boot-imx
Signed-off-by: Tom Rini <trini@konsulko.com>

Conflicts:
	common/Kconfig
	configs/dms-ba16_defconfig
2016-10-28 11:12:03 -04:00
Bin Meng
c4762157cf pci: Move CONFIG_PCI_PNP to Kconfig
Introduce CONFIG_PCI_PNP in Kconfig and move over boards' defconfig
to use that.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
[trini: Re-generate configs and include/configs/ changes]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-10-28 07:13:52 -04:00
Tom Rini
af27382e2d drivers/pci/Kconfig: Add PCI
Add 'PCI' as a menu option and migrate all existing users.

Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
2016-10-27 20:33:56 -04:00
Jagan Teki
1c140f7bbf imx6: icorem6: Add default mtd nand partition table
icorem6qdl> mtdparts

device nand0 <nand>, # parts = 6
0: spl                 0x00200000      0x00000000      0
1: uboot               0x00200000      0x00200000      0
2: env                 0x00100000      0x00400000      0
3: kernel              0x00400000      0x00500000      0
4: dtb                 0x00100000      0x00900000      0
5: rootfs              0x1f600000      0x00a00000      0

Cc: Stefano Babic <sbabic@denx.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-10-26 19:00:06 +02:00
Jagan Teki
310db71d04 imx6: icorem6: Enable MTD device support
Enable MTD device, partition and command support.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-10-26 19:00:06 +02:00
Jagan Teki
023ff2f732 imx6: icorem6: Add NAND support
Add NAND support for Engicam i.CoreM6 qdl board.

Boot Log:
--------

U-Boot SPL 2016.09-rc2-30755-gd3dc581-dirty (Sep 28 2016 - 23:00:43)
Trying to boot from NAND
NAND : 512 MiB

U-Boot 2016.09-rc2-30755-gd3dc581-dirty (Sep 28 2016 - 23:00:43 +0530)

CPU:   Freescale i.MX6SOLO rev1.3 at 792MHz
CPU:   Industrial temperature grade (-40C to 105C) at 55C
Reset cause: WDOG
Model: Engicam i.CoreM6 DualLite/Solo Starter Kit
DRAM:  256 MiB
NAND:  512 MiB
MMC:   FSL_SDHC: 0
In:    serial
Out:   serial
Err:   serial
Net:   FEC [PRIME]
Hit any key to stop autoboot:  0
icorem6qdl>

Cc: Scott Wood <oss@buserror.net>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-10-26 18:59:57 +02:00
Jagan Teki
f160c5c8b9 engicam: icorem6: Add DM_GPIO, DM_MMC support
Add DM_GPIO, DM_MMC support for u-boot and disable for SPL.

Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-10-26 16:53:16 +02:00
Jagan Teki
584133665a imx6: icorem6: Add ENET support
Add enet support for engicam icorem6 qdl starter kit.
- Add pinmux settings
- Add board_eth_init

TFTP log:
--------
Net:   FEC [PRIME]
Hit any key to stop autoboot:  0
icorem6qdl> tftpboot {fdt_addr} imx6dl-icore.dtb
Using FEC device
TFTP from server 192.168.2.96; our IP address is 192.168.2.75
Filename 'imx6dl-icore.dtb'.
Load address: 0x0
Loading: ######
         1.3 MiB/s
done
Bytes transferred = 28976 (7130 hex)
CACHE: Misaligned operation at range [00000000, 00007130]
icorem6qdl>

Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-10-26 16:53:16 +02:00
Jagan Teki
f4b7532f82 arm: imx: Add Engicam i.CoreM6 QDL Starter Kit initial support
Boot Log for i.CoreM6 DualLite/Solo Starter Kit:
-----------------------------------------------

U-Boot SPL 2016.09-rc2-30739-gd1fa290 (Sep 17 2016 - 00:37:46)
Trying to boot from MMC1

U-Boot 2016.09-rc2-30739-gd1fa290 (Sep 17 2016 - 00:37:46 +0530)

CPU:   Freescale i.MX6SOLO rev1.3 at 792MHz
CPU:   Industrial temperature grade (-40C to 105C) at 31C
Reset cause: POR
DRAM:  256 MiB
MMC:   FSL_SDHC: 0
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   CPU Net Initialization Failed
No ethernet found.
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc0 is current device
switch to partitions #0, OK
mmc0 is current device
reading boot.scr
** Unable to read file boot.scr **
reading zImage
6741808 bytes read in 341 ms (18.9 MiB/s)
Booting from mmc ...
reading imx6dl-icore.dtb
30600 bytes read in 19 ms (1.5 MiB/s)
   Booting using the fdt blob at 0x18000000
   Using Device Tree in place at 18000000, end 1800a787

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0

Boot Log for i.CoreM6 Quad/Dual Starter Kit:
--------------------------------------------

U-Boot SPL 2016.09-rc2-30739-gd1fa290 (Sep 17 2016 - 00:37:46)
Trying to boot from MMC1

U-Boot 2016.09-rc2-30739-gd1fa290 (Sep 17 2016 - 00:37:46 +0530)

CPU:   Freescale i.MX6Q rev1.2 at 792MHz
CPU:   Industrial temperature grade (-40C to 105C) at 28C
Reset cause: POR
DRAM:  512 MiB
MMC:   FSL_SDHC: 0
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   CPU Net Initialization Failed
No ethernet found.
Hit any key to stop autoboot:  0
icorem6qdl>

Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-10-26 16:53:16 +02:00
Jagan Teki
d259c00845 config: Move CONFIG_DEFAULT_FDT_FILE to defconfigs
- Add DEFAULT_FDT_FILE kconfig entry
- Move CONFIG_DEFAULT_FDT_FILE from include/configs to defconfigs

Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-10-26 16:53:16 +02:00
Simon Glass
869588decd Convert CONFIG_SYS_STDIO_DEREGISTER to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_STDIO_DEREGISTER

This option should never be enabled in SPL, so use
CONFIG_IS_ENABLED(SYS_STDIO_DEREGISTER) when checking the option.

Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Re-sync]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-10-23 18:34:17 -04:00
Simon Glass
4ef6ecec9c Convert CONFIG_USB_KEYBOARD to Kconfig
This converts the following to Kconfig:
   CONFIG_USB_KEYBOARD

Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Fixup MPC86* configs]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-10-23 18:34:14 -04:00
Simon Glass
f3f3efff91 Convert CONFIG_SYS_CONSOLE_INFO_QUIET to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_CONSOLE_INFO_QUIET

Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Make this default n, re-run the migration]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-10-23 18:34:12 -04:00
Simon Glass
84f2a5d0a6 Convert CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-23 18:34:01 -04:00
Simon Glass
3505bc5561 Convert CONFIG_SYS_CONSOLE_ENV_OVERWRITE to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_CONSOLE_ENV_OVERWRITE

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-23 18:33:58 -04:00
Simon Glass
b87ca80b9b Convert CONFIG_CONSOLE_SCROLL_LINES to Kconfig
This converts the following to Kconfig:
   CONFIG_CONSOLE_SCROLL_LINES

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-23 18:33:57 -04:00
Simon Glass
5ecf8c6618 video: Drop CONFIG_CONSOLE_INFO_QUIET
This is not used in U-Boot. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-23 18:33:55 -04:00
Simon Glass
fbda683292 Convert CONFIG_CONSOLE_EXTRA_INFO to Kconfig
This converts the following to Kconfig:
   CONFIG_CONSOLE_EXTRA_INFO

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-23 18:33:54 -04:00
Simon Glass
0872d443aa Convert CONFIG_VIDEO_SW_CURSOR to Kconfig
This converts the following to Kconfig:
   CONFIG_VIDEO_SW_CURSOR

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
[trini: Re-convert, find all the cases where this is off]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-10-23 18:33:52 -04:00
Simon Glass
1e1a0fb23d Convert CONFIG_VGA_AS_SINGLE_DEVICE to Kconfig
This converts the following to Kconfig:
   CONFIG_VGA_AS_SINGLE_DEVICE

Once we migrate to driver model for video, we should be able to drop this
option.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-10-23 18:33:48 -04:00
Simon Glass
002f967c50 Convert CONFIG_SYS_CONSOLE_BG_COL et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_CONSOLE_BG_COL
   CONFIG_SYS_CONSOLE_FG_COL

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-23 18:33:41 -04:00
Simon Glass
cfa307f839 Convert CONFIG_VIDEO_CT69000 to Kconfig
This converts the following to Kconfig:
   CONFIG_VIDEO_CT69000

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-23 18:33:40 -04:00
Simon Glass
c6745195be Convert CONFIG_CFB_CONSOLE_ANSI to Kconfig
This converts the following to Kconfig:
   CONFIG_CFB_CONSOLE_ANSI

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-23 18:33:38 -04:00
Simon Glass
bdba2b3a88 Convert CONFIG_CFB_CONSOLE to Kconfig
This converts the following to Kconfig:
   CONFIG_CFB_CONSOLE

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-10-23 18:33:37 -04:00
Simon Glass
12ca05a38b config: Drop CONFIG_CONSOLE_DEV
This is not really a config. Rename it to avoid confusion.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2016-10-23 18:33:36 -04:00
Simon Glass
83302fb8f7 config: Drop CONFIG_CONSOLE
This is not really a config. Rename it to avoid confusion.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2016-10-23 18:33:35 -04:00
Simon Glass
ef26d6039a Convert CONFIG_SYS_CONSOLE_IS_IN_ENV and CONFIG_CONSOLE_MUX to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_CONSOLE_IS_IN_ENV
   CONFIG_CONSOLE_MUX

Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Re-order, re-migrate]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-10-23 18:33:35 -04:00
Simon Glass
f8b19a889e Convert CONFIG_LCD to Kconfig
This converts the following to Kconfig:
   CONFIG_LCD

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2016-10-23 18:33:22 -04:00
Simon Glass
27604b158f Convert CONFIG_VIDEO to Kconfig
This converts the following to Kconfig:
   CONFIG_VIDEO

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2016-10-23 18:33:21 -04:00
Simon Glass
8f92558414 Convert CONSOLE_PRE_CONSOLE_BUFFER options to Kconfig
Move these option to Kconfig and tidy up existing uses.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2016-10-23 18:33:19 -04:00
Simon Glass
98af879976 Convert SILENT_CONSOLE options to Kconfig
Move these option to Kconfig and tidy up existing uses.

The Power PC boards don't have a suitable common element: the common header
files don't appear to line up with the Kconfig files as far as I can tell.
This results in a lot of defconfig changes.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagan Teki <jteki@openedev.com>
[trini: Re-migrate, update common/console.c logic]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-10-23 18:33:18 -04:00
Masahiro Yamada
f666a65824 ARM: uniphier: remove unneeded CONFIG_USB_MAX_CONTROLLER_COUNT define
ARCH_UNIPHIER selects DM_USB, where CONFIG_USB_MAX_CONTROLLER_COUNT
is not used.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-18 14:06:46 +09:00
Diego Dorta
d96796ca23 mx6sabresd: Add Falcon mode support
Allow i.MX6Q Sabre SD to load the kernel and dtb via SPL in Falcon mode.

Based on the Falcon mode code for MX6 Gateworks Ventana board.

Signed-off-by: Diego Dorta <diego.dorta@nxp.com>
2016-10-17 09:18:01 +02:00
Gary Bisson
e6672392e7 mx7_common: add secure boot support
Selecting the proper options to enable the build of the HAB tools.

Note, this support is disabled by default, one will have to select
the SECURE_BOOT configuration through menuconfig to enable it.

See doc/README.mxc_hab for more details.

Also remove duplicate options from board config headers.

Cc: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
2016-10-17 09:05:33 +02:00
Gary Bisson
e22685d2b6 mx6_common: add secure boot support
Selecting the proper options to enable the build of the HAB tools.

Note, this support is disabled by default, one will have to select
the SECURE_BOOT configuration through menuconfig to enable it.

See doc/README.mxc_hab for more details.

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
2016-10-17 09:04:43 +02:00
Tom Rini
78ad715788 Merge git://git.denx.de/u-boot-mpc85xx 2016-10-15 13:03:19 -04:00
Heiko Schocher
ebf7fff20a spl: move FDT_FIXUP_PARTITIONS to Kconfig
Move FDT_FIXUP_PARTITIONS to Kconfig and cleanup existing
uses.

Signed-off-by: Heiko Schocher <hs@denx.de>
2016-10-15 08:12:46 -04:00
Heiko Schocher
29d3bc793c spl: move SYS_OS_BASE to Kconfig
Move SYS_OS_BASE to Kconfig and cleanup existing
uses.

Signed-off-by: Heiko Schocher <hs@denx.de>
[trini: Also migrate a4m2k]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-10-15 08:12:27 -04:00
Heiko Schocher
c20ae2ffaa spl: move SPL_OS_BOOT to Kconfig
Move SPL_OS_BOOT to Kconfig and cleanup existing
uses.

Signed-off-by: Heiko Schocher <hs@denx.de>
2016-10-14 21:11:33 -04:00
Zhao Qiang
ec90ac7359 Txxx/RCW: Split unified RCW to RCWs for sd, spi and nand.
T series boards use unified RCW for sd, spi and nand boot.
Now split txxx_rcw.cfg to txxx_sd_rcw.cfg, txxx_spi_rcw.cfg
and txxx_nand_rcw.cfg for SPI/NAND/SD boot.
And modify RCW[PBI_SRC] for them:
	PBI_SRC=5            for SPI 24-bit addressing
	PBI_SRC=6            for SD boot
	PBI_SRC=14           for IFC NAND boot

Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-10-14 10:21:03 -07:00
Mugunthan V N
4b00d02558 include: configs: am335x: add Atheros phy support
In AM335x GP EVM, Atheros 8031 phy is used, enable the driver as
AM335x SoC RGMII delay mode has to be enabled in phy as mentioned
in the silicon errata Advisory 1.0.10

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-10-13 12:24:58 -05:00
Tom Rini
5ebd27d860 Merge branch 'master' of git://git.denx.de/u-boot-x86 2016-10-12 13:59:26 -04:00
Tom Rini
f812574e61 Merge branch 'master' of git://git.denx.de/u-boot-tegra 2016-10-12 08:31:08 -04:00
Tom Rini
3c594d34c4 Merge branch 'master' of git://git.denx.de/u-boot-uniphier 2016-10-12 08:30:38 -04:00
Tom Rini
99615d812f Merge git://www.denx.de/git/u-boot-marvell 2016-10-12 08:30:08 -04:00
Tom Rini
711b534120 Merge git://git.denx.de/u-boot-fsl-qoriq
Signed-off-by: Tom Rini <trini@konsulko.com>

Conflicts:
	include/configs/ls1021aqds.h
	include/configs/ls1021atwr.h
2016-10-12 08:29:42 -04:00
Lokesh Vutla
8435179271 common: Add DISPLAY_BOARDINFO
Create a Kconfig entry for DISPLAY_BOARDINFO and make it be the default
in certain architectures.  Migrate all config files.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-10-12 08:20:17 -04:00
Lokesh Vutla
19a9747535 common/Kconfig: Add DISPLAY_CPUINFO
Create a Kconfig entry for DISPLAY_CPUINFO and make it be the default
in certain architectures.  Migrate all config files.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-10-12 08:04:34 -04:00
Bin Meng
00bcaedd5c x86: Clean up unused macros in the configuration headers
Legacy video driver macros are not needed. Clean them up.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-12 10:58:24 +08:00
Bin Meng
2d3c573ee6 x86: coreboot: Convert to use DM coreboot video driver
This converts coreboot to use DM framebuffer driver.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-12 10:58:24 +08:00
Bin Meng
fcda8c3886 x86: Convert to use DM VESA video driver
At present only chromebook boards are converted to DM video. Other
x86 boards are still using the legacy cfb_console driver. This
switches to use DM version drivers.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-12 10:56:50 +08:00
Simon Glass
0d9483a25c x86: Adjust config to support DM_VIDEO
Update the common configuration so that it works correctly when
CONFIG_DM_VIDEO is enabled. This involves dropping the legacy CONFIG_VIDEO
option and changing the stdio device from "vga" to "vidconsole".

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11 11:55:33 +08:00
Marcel Ziswiler
7e1784651b tegra: usb gadget: fix ci udc operation if not hostpc capable
The Tegra 2 aka T20 is not host PC capable. Therefore gate the define
CONFIG_CI_UDC_HAS_HOSTPC in tegra-common-usb-gadget.h in case of
CONFIG_TEGRA20.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-10-10 10:44:37 -07:00
Masahiro Yamada
f1d9a9edb9 ARM: uniphier: define CONFIG_SMC911X along with CONFIG_MICRO_SUPPORT_CARD
This is an on-board Ethernet device.  It has no point if the Micro
Support Card is not available.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-10-10 10:03:23 +09:00
Masahiro Yamada
f4c93a4f4d ARM: uniphier: enable CONFIG_SYS_NO_FLASH if no CONFIG_MICRO_SUPPORT_CARD
NOR flash devices are seldom used on UniPhier platforms these days.
The only use case I see is the Micro Support Card is connected.
Otherwise, define CONFIG_SYS_NO_FLASH to disable NOR FLASH.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-10-10 10:03:23 +09:00
Masahiro Yamada
66deb91ec0 ARM: uniphier: fix typos in a comment block
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-10-10 10:03:23 +09:00
Walter Schweizer
a0a868b20b arm: kirkwood: add support for Synology DS109 board
Synology DS109 is based on MV88F6281. The code
is based on Dreamplug code with modificatons
from Synologys open source repository.

Signed-off-by: Walter Schweizer <swwa@users.sourceforge.net>
Signed-off-by: Stefan Roese <sr@denx.de>
2016-10-09 10:55:32 +02:00
Tom Rini
f5fd45ff64 Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2016-10-08 09:33:37 -04:00
B, Ravi
279dcd8975 dra7x: dfu: qspi: increase the qspi spl partition to 256K
The SPL size for dra7x platform increased beyond 64K,
increasing the size to 256K to cater for future enhancement.

Signed-off-by: Ravi Babu <ravibabu@ti.com>
2016-10-08 09:33:33 -04:00
B, Ravi
480579670b dra7xx: config: cleanup: moved to kconfig for CONFIG_SPL_ENV_SUPPORT
removing CONFIG_SPL_ENV_SUPPORT defined in header files
due to moved to kconfig option for CONFIG_SPL_ENV_SUPPORT

Signed-off-by: Ravi Babu <ravibabu@ti.com>
2016-10-08 09:33:33 -04:00
Masahiro Yamada
43ebbfc39f ARM: keystone: rename clk_get_rate() to ks_clk_get_rate()
The KeyStone platform has its own clk_get_rate() but its prototype
is different from that of the common-clk (clk-uclass) framework.

Prefix the KeyStone specific implementation with ks_ in order to
avoid name-space conflict.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-08 09:33:13 -04:00
Pratiyush Srivastava
76379dfb7e board: ls1012afrdm: overwrite CONFIG_EXTRA_ENV_SETTINGS
LS1012AFRDM has 512MB of DDR. So update kernel load address to
0x96000000.

Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com>
[York Sun: Reformatted commit message]
Reviewed-by: York Sun <york.sun@nxp.com>
2016-10-07 11:34:24 -07:00
Pratiyush Srivastava
88a62685b0 armv8: ls1012a: Updating CONFIG_EXTRA_ENV_SETTINGS
Remove ramdisk_addr, ramdisk_size and update UART baud-rate.

Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-10-07 11:34:11 -07:00
Ken Lin
3dddc793e0 board: ge: bx50v3: Pass video bootargs for b850v3
Due to clock source restrictions on i.MX6, certain pixel clock rates can
not be supported. Hence default the resolution/frame rate during boot to a
supported value by passing video bootargs 1024x768@60 for
HDMI (Display Port1) and LVDS (Display Port2) on B850v3.

Signed-off-by: Ken Lin <ken.lin@advantech.com.tw>
Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com>
2016-10-07 16:32:28 +02:00
Semen Protsenko
234600c1ca arm: dra7xx: Move fastboot options to defconfig
Now that fastboot options are available in Kconfig, we can migrate them
from DRA7 header to corresponding DRA7 defconfigs.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-10-07 14:26:29 +00:00
Stefan Agner
7443a1ddb1 colibri_imx7: remove legancy I2C support
Remove legancy I2C config and code in favor of upcomming DM/DT
enable I2C support.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2016-10-07 12:26:15 +02:00