Merge git://git.denx.de/u-boot-rockchip

This commit is contained in:
Tom Rini 2016-11-26 09:26:27 -05:00
commit 8d0898544e
40 changed files with 1133 additions and 90 deletions

View file

@ -28,14 +28,16 @@ dtb-$(CONFIG_EXYNOS5) += exynos5250-arndale.dtb \
exynos5422-odroidxu3.dtb
dtb-$(CONFIG_EXYNOS7420) += exynos7420-espresso7420.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3036-sdk.dtb \
rk3288-firefly.dtb \
rk3288-jerry.dtb \
rk3288-veyron-jerry.dtb \
rk3288-veyron-mickey.dtb \
rk3288-veyron-minnie.dtb \
rk3288-rock2-square.dtb \
rk3288-evb.dtb \
rk3288-fennec.dtb \
rk3288-miniarm.dtb \
rk3288-popmetal.dtb \
rk3036-sdk.dtb \
rk3399-evb.dtb
dtb-$(CONFIG_ARCH_MESON) += \
meson-gxbb-odroidc2.dtb

View file

@ -16,10 +16,25 @@
stdout-path = &uart2;
};
usb_control {
compatible = "rockchip,rk3036-usb-control";
host_drv_gpio = <&gpio2 23 GPIO_ACTIVE_LOW>;
otg_drv_gpio = <&gpio0 26 GPIO_ACTIVE_LOW>;
vcc5v0_otg: vcc5v0-otg-drv {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_otg";
gpio = <&gpio0 26 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&otg_vbus_drv>;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
vcc5v0_host: vcc5v0-host-drv {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_host";
gpio = <&gpio2 23 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&host_vbus_drv>;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
};
@ -42,3 +57,17 @@
&usb_otg {
status = "okay";
};
&pinctrl {
usb_otg {
otg_vbus_drv: host-vbus-drv {
rockchip,pins = <0 26 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
usb_host {
host_vbus_drv: host-vbus-drv {
rockchip,pins = <2 23 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};

View file

@ -13,6 +13,8 @@
/ {
aliases {
i2c20 = &i2c_tunnel;
video0 = &vopl;
video1 = &vopb;
};
gpio_keys: gpio-keys {

View file

@ -55,6 +55,17 @@
};
};
&dmc {
rockchip,pctl-timing = <0x29a 0xc8 0x1f4 0x42 0x4e 0x4 0xea 0xa
0x5 0x0 0xa 0x7 0x19 0x24 0xa 0x7
0x5 0xa 0x5 0x200 0x5 0x10 0x40 0x0
0x1 0x7 0x7 0x4 0xc 0x43 0x100 0x0
0x5 0x0>;
rockchip,phy-timing = <0x48f9aab4 0xea0910 0x1002c200
0xa60 0x40 0x10 0x0>;
rockchip,sdram-params = <0x30B25564 0x627 3 666000000 3 9 1>;
};
&gpio_keys {
power {
gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
@ -108,11 +119,6 @@
pinctrl-0 = <&vcc50_hdmi_en>;
};
&vopb {
/* Disable this so that we use vopl */
status = "disabled";
};
&edp {
pinctrl-names = "default";
pinctrl-0 = <&edp_hpd>;

View file

@ -0,0 +1,277 @@
/*
* Google Veyron Mickey Rev 0 board device tree source
*
* Copyright 2015 Google, Inc
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "rk3288-veyron-chromebook.dtsi"
/ {
model = "Google Mickey";
compatible = "google,veyron-mickey-rev8", "google,veyron-mickey-rev7",
"google,veyron-mickey-rev6", "google,veyron-mickey-rev5",
"google,veyron-mickey-rev4", "google,veyron-mickey-rev3",
"google,veyron-mickey-rev2", "google,veyron-mickey-rev1",
"google,veyron-mickey-rev0", "google,veyron-mickey",
"google,veyron", "rockchip,rk3288";
vcc_5v: vcc-5v {
vin-supply = <&vcc33_sys>;
};
vcc33_io: vcc33_io {
compatible = "regulator-fixed";
regulator-name = "vcc33_io";
regulator-always-on;
regulator-boot-on;
vin-supply = <&vcc33_sys>;
};
};
&cpu_thermal {
/delete-node/ trips;
/delete-node/ cooling-maps;
trips {
cpu_alert_almost_warm: cpu_alert_almost_warm {
temperature = <63000>; /* millicelsius */
hysteresis = <2000>; /* millicelsius */
type = "passive";
};
cpu_alert_warm: cpu_alert_warm {
temperature = <65000>; /* millicelsius */
hysteresis = <2000>; /* millicelsius */
type = "passive";
};
cpu_alert_almost_hot: cpu_alert_almost_hot {
temperature = <80000>; /* millicelsius */
hysteresis = <2000>; /* millicelsius */
type = "passive";
};
cpu_alert_hot: cpu_alert_hot {
temperature = <82000>; /* millicelsius */
hysteresis = <2000>; /* millicelsius */
type = "passive";
};
cpu_alert_hotter: cpu_alert_hotter {
temperature = <84000>; /* millicelsius */
hysteresis = <2000>; /* millicelsius */
type = "passive";
};
cpu_alert_very_hot: cpu_alert_very_hot {
temperature = <85000>; /* millicelsius */
hysteresis = <2000>; /* millicelsius */
type = "passive";
};
cpu_crit: cpu_crit {
temperature = <90000>; /* millicelsius */
hysteresis = <2000>; /* millicelsius */
type = "critical";
};
};
cooling-maps {
/*
* After 1st level, throttle the CPU down to as low as 1.4 GHz
* and don't let the GPU go faster than 400 MHz. Note that we
* won't throttle the GPU lower than 400 MHz due to CPU
* heat--we'll let the GPU do the rest itself.
*/
cpu_warm_limit_cpu {
trip = <&cpu_alert_warm>;
cooling-device =
<&cpu0 THERMAL_NO_LIMIT 4>;
};
/*
* Add some discrete steps to help throttling system deal
* with the fact that there are two passive cooling devices:
* the CPU and the GPU.
*
* - 1.2 GHz - 1.0 GHz (almost hot)
* - 800 MHz (hot)
* - 800 MHz - 696 MHz (hotter)
* - 696 MHz - min (very hot)
*
* Note:
* - 800 MHz appears to be a "sweet spot" for me. I can run
* some pretty serious workload here and be happy.
* - After 696 MHz we stop lowering voltage, so throttling
* past there is less effective.
*/
cpu_almost_hot_limit_cpu {
trip = <&cpu_alert_almost_hot>;
cooling-device =
<&cpu0 5 6>;
};
cpu_hot_limit_cpu {
trip = <&cpu_alert_hot>;
cooling-device =
<&cpu0 7 7>;
};
cpu_hotter_limit_cpu {
trip = <&cpu_alert_hotter>;
cooling-device =
<&cpu0 7 8>;
};
cpu_very_hot_limit_cpu {
trip = <&cpu_alert_very_hot>;
cooling-device =
<&cpu0 8 THERMAL_NO_LIMIT>;
};
};
};
&dmc {
rockchip,pctl-timing = <0x215 0xc8 0x0 0x35 0x26 0x2 0x70 0x2000d
0x6 0x0 0x8 0x4 0x17 0x24 0xd 0x6
0x4 0x8 0x4 0x76 0x4 0x0 0x30 0x0
0x1 0x2 0x2 0x4 0x0 0x0 0xc0 0x4
0x8 0x1f4>;
rockchip,phy-timing = <0x48d7dd93 0x187008d8 0x121076
0x0 0xc3 0x6 0x2>;
rockchip,sdram-params = <0x20d266a4 0x5b6 2 533000000 6 9 1>;
};
&emmc {
/delete-property/mmc-hs200-1_8v;
};
&i2c2 {
status = "disabled";
};
&i2c4 {
status = "disabled";
};
&i2s {
status = "okay";
clock-names = "i2s_hclk", "i2s_clk", "i2s_clk_out";
clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>, <&cru SCLK_I2S0_OUT>;
};
&rk808 {
pinctrl-names = "default";
pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
dvs-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>,
<&gpio7 15 GPIO_ACTIVE_HIGH>;
/delete-property/ vcc6-supply;
/delete-property/ vcc12-supply;
vcc11-supply = <&vcc33_sys>;
regulators {
/* vcc33_io is sourced directly from vcc33_sys */
/delete-node/ LDO_REG1;
/delete-node/ LDO_REG7;
/* This is not a pwren anymore, but the real power supply */
vdd10_lcd: LDO_REG7 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-name = "vdd10_lcd";
regulator-suspend-mem-disabled;
};
vcc18_lcd: LDO_REG8 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc18_lcd";
regulator-suspend-mem-disabled;
};
};
};
&pinctrl {
hdmi {
power_hdmi_on: power-hdmi-on {
rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pmic {
dvs_1: dvs-1 {
rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>;
};
dvs_2: dvs-2 {
rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
};
&sdmmc {
status = "disabled";
};
&sdio0 {
status = "disabled";
};
&sdmmc {
status = "disabled";
};
&spi0 {
status = "disabled";
};
&usb_host0_ehci {
status = "disabled";
};
&usb_host1 {
status = "disabled";
};
&vcc50_hdmi {
enable-active-high;
gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&power_hdmi_on>;
};

View file

@ -0,0 +1,301 @@
/*
* Google Veyron Minnie Rev 0+ board device tree source
*
* Copyright 2015 Google, Inc
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "rk3288-veyron-chromebook.dtsi"
/ {
model = "Google Minnie";
compatible = "google,veyron-minnie-rev4", "google,veyron-minnie-rev3",
"google,veyron-minnie-rev2", "google,veyron-minnie-rev1",
"google,veyron-minnie-rev0", "google,veyron-minnie",
"google,veyron", "rockchip,rk3288";
backlight_regulator: backlight-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&bl_pwr_en>;
regulator-name = "backlight_regulator";
vin-supply = <&vcc33_sys>;
startup-delay-us = <15000>;
};
panel_regulator: panel-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&lcd_enable_h>;
regulator-name = "panel_regulator";
startup-delay-us = <100000>;
vin-supply = <&vcc33_sys>;
};
vcc18_lcd: vcc18-lcd {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&avdd_1v8_disp_en>;
regulator-name = "vcc18_lcd";
regulator-always-on;
regulator-boot-on;
vin-supply = <&vcc18_wl>;
};
};
&backlight {
/* Minnie panel PWM must be >= 1%, so start non-zero brightness at 3 */
brightness-levels = <
0 3 4 5 6 7
8 9 10 11 12 13 14 15
16 17 18 19 20 21 22 23
24 25 26 27 28 29 30 31
32 33 34 35 36 37 38 39
40 41 42 43 44 45 46 47
48 49 50 51 52 53 54 55
56 57 58 59 60 61 62 63
64 65 66 67 68 69 70 71
72 73 74 75 76 77 78 79
80 81 82 83 84 85 86 87
88 89 90 91 92 93 94 95
96 97 98 99 100 101 102 103
104 105 106 107 108 109 110 111
112 113 114 115 116 117 118 119
120 121 122 123 124 125 126 127
128 129 130 131 132 133 134 135
136 137 138 139 140 141 142 143
144 145 146 147 148 149 150 151
152 153 154 155 156 157 158 159
160 161 162 163 164 165 166 167
168 169 170 171 172 173 174 175
176 177 178 179 180 181 182 183
184 185 186 187 188 189 190 191
192 193 194 195 196 197 198 199
200 201 202 203 204 205 206 207
208 209 210 211 212 213 214 215
216 217 218 219 220 221 222 223
224 225 226 227 228 229 230 231
232 233 234 235 236 237 238 239
240 241 242 243 244 245 246 247
248 249 250 251 252 253 254 255>;
power-supply = <&backlight_regulator>;
};
&dmc {
rockchip,pctl-timing = <0x215 0xc8 0x0 0x35 0x26 0x2 0x70 0x2000d
0x6 0x0 0x8 0x4 0x17 0x24 0xd 0x6
0x4 0x8 0x4 0x76 0x4 0x0 0x30 0x0
0x1 0x2 0x2 0x4 0x0 0x0 0xc0 0x4
0x8 0x1f4>;
rockchip,phy-timing = <0x48d7dd93 0x187008d8 0x121076
0x0 0xc3 0x6 0x1>;
rockchip,sdram-params = <0x20d266a4 0x5b6 6 533000000 6 13 0>;
};
&emmc {
/delete-property/mmc-hs200-1_8v;
};
&gpio_keys {
pinctrl-0 = <&pwr_key_h &ap_lid_int_l &volum_down_l &volum_up_l>;
volum_down {
label = "Volum_down";
gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
debounce-interval = <100>;
};
volum_up {
label = "Volum_up";
gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
debounce-interval = <100>;
};
};
&i2c_tunnel {
battery: bq27500@55 {
compatible = "ti,bq27500";
reg = <0x55>;
};
};
&i2c3 {
status = "okay";
clock-frequency = <400000>;
i2c-scl-falling-time-ns = <50>;
i2c-scl-rising-time-ns = <300>;
touchscreen@10 {
compatible = "elan,ekth3500";
reg = <0x10>;
interrupt-parent = <&gpio2>;
interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default";
pinctrl-0 = <&touch_int &touch_rst>;
reset-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
vcc33-supply = <&vcc33_touch>;
vccio-supply = <&vcc33_touch>;
};
};
&panel {
compatible = "auo,b101ean01", "simple-panel";
power-supply= <&panel_regulator>;
};
&rk808 {
pinctrl-names = "default";
pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
regulators {
vcc33_touch: LDO_REG2 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc33_touch";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc5v_touch: SWITCH_REG2 {
regulator-name = "vcc5v_touch";
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
};
&sdmmc {
disable-wp;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
&sdmmc_bus4>;
};
&vcc_5v {
enable-active-high;
gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&drv_5v>;
};
&vcc50_hdmi {
enable-active-high;
gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc50_hdmi_en>;
};
&pinctrl {
backlight {
bl_pwr_en: bl_pwr_en {
rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
buck-5v {
drv_5v: drv-5v {
rockchip,pins = <7 21 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
buttons {
volum_down_l: volum-down-l {
rockchip,pins = <5 11 RK_FUNC_GPIO &pcfg_pull_up>;
};
volum_up_l: volum-up-l {
rockchip,pins = <5 10 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
hdmi {
vcc50_hdmi_en: vcc50-hdmi-en {
rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
lcd {
lcd_enable_h: lcd-en {
rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_pull_none>;
};
avdd_1v8_disp_en: avdd-1v8-disp-en {
rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pmic {
dvs_1: dvs-1 {
rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>;
};
dvs_2: dvs-2 {
rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
prochot {
gpio_prochot: gpio-prochot {
rockchip,pins = <2 8 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
touchscreen {
touch_int: touch-int {
rockchip,pins = <2 14 RK_FUNC_GPIO &pcfg_pull_none>;
};
touch_rst: touch-rst {
rockchip,pins = <2 15 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};

View file

@ -245,14 +245,6 @@
533000 1150000
666000 1200000
>;
rockchip,pctl-timing = <0x29a 0xc8 0x1f4 0x42 0x4e 0x4 0xea 0xa
0x5 0x0 0xa 0x7 0x19 0x24 0xa 0x7
0x5 0xa 0x5 0x200 0x5 0x10 0x40 0x0
0x1 0x7 0x7 0x4 0xc 0x43 0x100 0x0
0x5 0x0>;
rockchip,phy-timing = <0x48f9aab4 0xea0910 0x1002c200
0xa60 0x40 0x10 0x0>;
rockchip,sdram-params = <0x30B25564 0x627 3 666000000 3 9 1>;
};
&efuse {

View file

@ -21,7 +21,7 @@ config ROCKCHIP_RK3288
including NEON and GPU, 1MB L2 cache, Mali-T7 graphics, two
video interfaces supporting HDMI and eDP, several DDR3 options
and video codec support. Peripherals include Gigabit Ethernet,
USB2 host and OTG, SDIO, I2S, UART,s, SPI, I2C and PWMs.
USB2 host and OTG, SDIO, I2S, UARTs, SPI, I2C and PWMs.
config ROCKCHIP_RK3399
bool "Support Rockchip RK3399"

View file

@ -64,6 +64,10 @@ u32 spl_boot_device(void)
}
fallback:
#elif defined(CONFIG_TARGET_CHROMEBOOK_JERRY) || \
defined(CONFIG_TARGET_CHROMEBIT_MICKEY) || \
defined(CONFIG_TARGET_CHROMEBOOK_MINNIE)
return BOOT_DEVICE_SPI;
#endif
return BOOT_DEVICE_MMC1;
}

View file

@ -16,6 +16,8 @@
#include <asm/arch/boot_mode.h>
#include <asm/gpio.h>
#include <dm/pinctrl.h>
#include <dt-bindings/clock/rk3288-cru.h>
#include <power/regulator.h>
DECLARE_GLOBAL_DATA_PTR;
@ -56,6 +58,39 @@ int board_late_init(void)
return rk_board_late_init();
}
#ifndef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM
static int veyron_init(void)
{
struct udevice *dev;
struct clk clk;
int ret;
ret = regulator_get_by_platname("vdd_arm", &dev);
if (ret)
return ret;
/* Slowly raise to max CPU voltage to prevent overshoot */
ret = regulator_set_value(dev, 1200000);
if (ret)
return ret;
udelay(175); /* Must wait for voltage to stabilize, 2mV/us */
ret = regulator_set_value(dev, 1400000);
if (ret)
return ret;
udelay(100); /* Must wait for voltage to stabilize, 2mV/us */
ret = rockchip_get_clk(&clk.dev);
if (ret)
return ret;
clk.id = PLL_APLL;
ret = clk_set_rate(&clk, 1800000000);
if (IS_ERR_VALUE(ret))
return ret;
return 0;
}
#endif
int board_init(void)
{
#ifdef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM
@ -87,6 +122,15 @@ err:
return -1;
#else
int ret;
/* We do some SoC one time setting here */
if (!fdt_node_check_compatible(gd->fdt_blob, 0, "google,veyron")) {
ret = veyron_init();
if (ret)
return ret;
}
return 0;
#endif
}

View file

@ -49,6 +49,25 @@ config TARGET_CHROMEBOOK_JERRY
WiFi. It includes a Chrome OS EC (Cortex-M3) to provide access to
the keyboard and battery functions.
config TARGET_CHROMEBIT_MICKEY
bool "Google/Rockchip Veyron-Mickey Chromebit"
help
Mickey is a small RK3288-based device with one USB 3.0 port, HDMI
and WiFi. It has a separate power port and is designed to connect
to the HDMI input of a monitor or TV. It has no internal battery.
Typically a USB hub or wireless keyboard/touchpad is used to get
keyboard and mouse access.
config TARGET_CHROMEBOOK_MINNIE
bool "Google/Rockchip Veyron-Minnie Chromebook"
help
Jerry is a RK3288-based convertible clamshell device with 2 USB 3.0
ports, micro HDMI, a 10.1-inch 1280x800 EDP display, micro-SD card,
HD camera, touchpad, WiFi and Bluetooth. It includes a Chrome OS
EC (Cortex-M3) to provide access to the keyboard and battery
functions. It includes 2 or 4GB of SDRAM and 16 or 32GB of
internal MMC. The product name is ASUS Chromebook Flip.
config TARGET_ROCK2
bool "Radxa Rock 2"
help
@ -88,7 +107,7 @@ source "board/chipspark/popmetal_rk3288/Kconfig"
source "board/firefly/firefly-rk3288/Kconfig"
source "board/google/chromebook_jerry/Kconfig"
source "board/google/veyron/Kconfig"
source "board/radxa/rock2/Kconfig"

View file

@ -1,15 +0,0 @@
if TARGET_CHROMEBOOK_JERRY
config SYS_BOARD
default "chromebook_jerry"
config SYS_VENDOR
default "google"
config SYS_CONFIG_NAME
default "chromebook_jerry"
config BOARD_SPECIFIC_OPTIONS # dummy
def_bool y
endif

View file

@ -1,6 +0,0 @@
CHROMEBOOK JERRY BOARD
M: Simon Glass <sjg@chromium.org>
S: Maintained
F: board/google/chromebook_jerry/
F: include/configs/chromebook_jerry.h
F: configs/chromebook_jerry_defconfig

View file

@ -1,7 +0,0 @@
/*
* (C) Copyright 2015 Google, Inc
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>

View file

@ -0,0 +1,47 @@
if TARGET_CHROMEBOOK_JERRY
config SYS_BOARD
default "veyron"
config SYS_VENDOR
default "google"
config SYS_CONFIG_NAME
default "veyron"
config BOARD_SPECIFIC_OPTIONS # dummy
def_bool y
endif
if TARGET_CHROMEBIT_MICKEY
config SYS_BOARD
default "veyron"
config SYS_VENDOR
default "google"
config SYS_CONFIG_NAME
default "veyron"
config BOARD_SPECIFIC_OPTIONS # dummy
def_bool y
endif
if TARGET_CHROMEBOOK_MINNIE
config SYS_BOARD
default "veyron"
config SYS_VENDOR
default "google"
config SYS_CONFIG_NAME
default "veyron"
config BOARD_SPECIFIC_OPTIONS # dummy
def_bool y
endif

View file

@ -0,0 +1,20 @@
CHROMEBOOK JERRY BOARD
M: Simon Glass <sjg@chromium.org>
S: Maintained
F: board/google/veyron/
F: include/configs/veyron.h
F: configs/chromebook_jerry_defconfig
CHROMEBIT MICKEY BOARD
M: Simon Glass <sjg@chromium.org>
S: Maintained
F: board/google/veyron/
F: include/configs/veyron.h
F: configs/chromebit_mickey_defconfig
CHROMEBIT MINNIE BOARD
M: Simon Glass <sjg@chromium.org>
S: Maintained
F: board/google/veyron/
F: include/configs/veyron.h
F: configs/chromebit_minnie_defconfig

View file

@ -4,4 +4,4 @@
# SPDX-License-Identifier: GPL-2.0+
#
obj-y += jerry.o
obj-y += veyron.o

View file

@ -0,0 +1,13 @@
/*
* (C) Copyright 2015 Google, Inc
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
/*
* We should increase the DDR voltage to 1.2V using the PWM regulator.
* There is a U-Boot driver for this but it may need to add support for the
* 'voltage-table' property.
*/

View file

@ -71,5 +71,5 @@ void dram_init_banksize(void)
{
/* Reserve 0x200000 for ATF bl31 */
gd->bd->bi_dram[0].start = 0x200000;
gd->bd->bi_dram[0].size = 0x80000000;
gd->bd->bi_dram[0].size = 0x7e000000;
}

View file

@ -292,7 +292,10 @@ static int do_value(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
return CMD_RET_FAILURE;
}
ret = regulator_set_value(dev, value);
if (!force)
ret = regulator_set_value(dev, value);
else
ret = regulator_set_value_force(dev, value);
if (ret) {
printf("Regulator: %s - can't set the Voltage!\n",
uc_pdata->name);

View file

@ -151,9 +151,10 @@ static int stdio_probe_device(const char *name, enum uclass_id id,
*sdevp = NULL;
seq = trailing_strtoln(name, NULL);
if (seq == -1)
seq = 0;
ret = uclass_get_device_by_seq(id, seq, &dev);
if (ret == -ENODEV)
ret = uclass_first_device_err(id, &dev);
else
ret = uclass_get_device_by_seq(id, seq, &dev);
if (ret) {
debug("No %s device for seq %d (%s)\n", uclass_get_name(id),
seq, name);
@ -173,12 +174,12 @@ static int stdio_probe_device(const char *name, enum uclass_id id,
}
#endif
struct stdio_dev* stdio_get_by_name(const char *name)
struct stdio_dev *stdio_get_by_name(const char *name)
{
struct list_head *pos;
struct stdio_dev *sdev;
if(!name)
if (!name)
return NULL;
list_for_each(pos, &(devs.list)) {

View file

@ -0,0 +1,84 @@
CONFIG_ARM=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
# CONFIG_SPL_MMC_SUPPORT is not set
CONFIG_ROCKCHIP_RK3288=y
CONFIG_TARGET_CHROMEBIT_MICKEY=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_STACK_R_ADDR=0x80000
CONFIG_DM_KEYBOARD=y
CONFIG_DEFAULT_DEVICE_TREE="rk3288-veyron-mickey"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMLS is not set
CONFIG_CMD_MMC=y
CONFIG_CMD_SF=y
CONFIG_CMD_SPI=y
CONFIG_CMD_I2C=y
CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
CONFIG_CMD_PMIC=y
CONFIG_CMD_REGULATOR=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_REGMAP=y
CONFIG_SPL_REGMAP=y
CONFIG_SYSCON=y
CONFIG_SPL_SYSCON=y
# CONFIG_SPL_SIMPLE_BUS is not set
CONFIG_CLK=y
CONFIG_SPL_CLK=y
CONFIG_ROCKCHIP_GPIO=y
CONFIG_I2C_CROS_EC_TUNNEL=y
CONFIG_SYS_I2C_ROCKCHIP=y
CONFIG_I2C_MUX=y
CONFIG_CROS_EC_KEYB=y
CONFIG_CMD_CROS_EC=y
CONFIG_CROS_EC=y
CONFIG_CROS_EC_SPI=y
CONFIG_PWRSEQ=y
CONFIG_ROCKCHIP_DWMMC=y
CONFIG_PINCTRL=y
CONFIG_SPL_PINCTRL=y
# CONFIG_SPL_PINCTRL_FULL is not set
CONFIG_ROCKCHIP_RK3288_PINCTRL=y
CONFIG_DM_PMIC=y
# CONFIG_SPL_PMIC_CHILDREN is not set
CONFIG_PMIC_RK808=y
CONFIG_DM_REGULATOR=y
CONFIG_SPL_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_REGULATOR_RK808=y
CONFIG_DM_PWM=y
CONFIG_PWM_ROCKCHIP=y
CONFIG_RAM=y
CONFIG_SPL_RAM=y
CONFIG_DEBUG_UART=y
CONFIG_DEBUG_UART_BASE=0xff690000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART_SHIFT=2
CONFIG_SYS_NS16550=y
CONFIG_ROCKCHIP_SERIAL=y
CONFIG_ROCKCHIP_SPI=y
CONFIG_SYSRESET=y
CONFIG_DM_VIDEO=y
CONFIG_DISPLAY=y
CONFIG_VIDEO_ROCKCHIP=y
CONFIG_USE_TINY_PRINTF=y
CONFIG_CMD_DHRYSTONE=y
CONFIG_ERRNO_STR=y
CONFIG_SPL_OF_PLATDATA=y
# CONFIG_SPL_OF_LIBFDT is not set

View file

@ -1,16 +1,13 @@
CONFIG_ARM=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_SPL_MMC_SUPPORT is not set
CONFIG_SPL_POWER_SUPPORT=y
CONFIG_ROCKCHIP_RK3288=y
CONFIG_TARGET_CHROMEBOOK_JERRY=y
CONFIG_ROCKCHIP_FAST_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_STACK_R_ADDR=0x80000
CONFIG_DEFAULT_DEVICE_TREE="rk3288-jerry"
CONFIG_DEFAULT_DEVICE_TREE="rk3288-veyron-jerry"
CONFIG_SILENT_CONSOLE=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL_STACK_R=y
@ -36,7 +33,7 @@ CONFIG_CMD_EXT4=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent"
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_REGMAP=y
CONFIG_SPL_REGMAP=y
CONFIG_SYSCON=y
@ -71,6 +68,7 @@ CONFIG_DEBUG_UART_BASE=0xff690000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART_SHIFT=2
CONFIG_SYS_NS16550=y
CONFIG_ROCKCHIP_SERIAL=y
CONFIG_ROCKCHIP_SPI=y
CONFIG_SYSRESET=y
CONFIG_DM_VIDEO=y
@ -80,3 +78,5 @@ CONFIG_CONSOLE_SCROLL_LINES=10
CONFIG_USE_TINY_PRINTF=y
CONFIG_CMD_DHRYSTONE=y
CONFIG_ERRNO_STR=y
CONFIG_SPL_OF_PLATDATA=y
# CONFIG_SPL_OF_LIBFDT is not set

View file

@ -0,0 +1,82 @@
CONFIG_ARM=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
# CONFIG_SPL_MMC_SUPPORT is not set
CONFIG_ROCKCHIP_RK3288=y
CONFIG_TARGET_CHROMEBOOK_MINNIE=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_STACK_R_ADDR=0x80000
CONFIG_DEFAULT_DEVICE_TREE="rk3288-veyron-minnie"
CONFIG_SILENT_CONSOLE=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMLS is not set
CONFIG_CMD_MMC=y
CONFIG_CMD_SF=y
CONFIG_CMD_SPI=y
CONFIG_CMD_I2C=y
CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
CONFIG_CMD_PMIC=y
CONFIG_CMD_REGULATOR=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_REGMAP=y
CONFIG_SPL_REGMAP=y
CONFIG_SYSCON=y
CONFIG_SPL_SYSCON=y
# CONFIG_SPL_SIMPLE_BUS is not set
CONFIG_CLK=y
CONFIG_SPL_CLK=y
CONFIG_ROCKCHIP_GPIO=y
CONFIG_I2C_CROS_EC_TUNNEL=y
CONFIG_SYS_I2C_ROCKCHIP=y
CONFIG_I2C_MUX=y
CONFIG_DM_KEYBOARD=y
CONFIG_CROS_EC_KEYB=y
CONFIG_CROS_EC=y
CONFIG_CROS_EC_SPI=y
CONFIG_PWRSEQ=y
CONFIG_ROCKCHIP_DWMMC=y
CONFIG_PINCTRL=y
CONFIG_SPL_PINCTRL=y
# CONFIG_SPL_PINCTRL_FULL is not set
CONFIG_ROCKCHIP_RK3288_PINCTRL=y
CONFIG_DM_PMIC=y
# CONFIG_SPL_PMIC_CHILDREN is not set
CONFIG_PMIC_RK808=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_REGULATOR_RK808=y
CONFIG_PWM_ROCKCHIP=y
CONFIG_RAM=y
CONFIG_SPL_RAM=y
CONFIG_DEBUG_UART=y
CONFIG_DEBUG_UART_BASE=0xff690000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART_SHIFT=2
CONFIG_SYS_NS16550=y
CONFIG_ROCKCHIP_SERIAL=y
CONFIG_ROCKCHIP_SPI=y
CONFIG_SYSRESET=y
CONFIG_DM_VIDEO=y
CONFIG_DISPLAY=y
CONFIG_VIDEO_ROCKCHIP=y
CONFIG_CONSOLE_SCROLL_LINES=10
CONFIG_USE_TINY_PRINTF=y
CONFIG_CMD_DHRYSTONE=y
CONFIG_ERRNO_STR=y
CONFIG_SPL_OF_PLATDATA=y
# CONFIG_SPL_OF_LIBFDT is not set

View file

@ -24,6 +24,7 @@ CONFIG_ROCKCHIP_DWMMC=y
CONFIG_ROCKCHIP_SDHCI=y
CONFIG_PINCTRL=y
CONFIG_ROCKCHIP_RK3399_PINCTRL=y
CONFIG_PWM_ROCKCHIP=y
CONFIG_REGULATOR_PWM=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_RAM=y

View file

@ -32,7 +32,11 @@ CONFIG_LED=y
CONFIG_ROCKCHIP_DWMMC=y
CONFIG_PINCTRL=y
CONFIG_ROCKCHIP_RK3036_PINCTRL=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_RAM=y
CONFIG_SYSRESET=y
CONFIG_CMD_DHRYSTONE=y
CONFIG_ERRNO_STR=y
CONFIG_CMD_USB=y
CONFIG_USB=y
CONFIG_USB_STORAGE=y

View file

@ -691,6 +691,13 @@ static ulong rk3288_clk_set_rate(struct clk *clk, ulong rate)
gclk_rate = rkclk_pll_get_rate(priv->cru, CLK_GENERAL);
switch (clk->id) {
case PLL_APLL:
/* We only support a fixed rate here */
if (rate != 1800000000)
return -EINVAL;
rk3288_clk_configure_cpu(priv->cru, priv->grf);
new_rate = rate;
break;
case CLK_DDR:
new_rate = rkclk_configure_ddr(priv->cru, priv->grf, rate);
break;

View file

@ -1138,7 +1138,7 @@ int spi_flash_scan(struct spi_flash *flash)
return ret;
#endif
#if CONFIG_IS_ENABLED(OF_CONTROL)
#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
ret = spi_flash_decode_fdt(gd->fdt_blob, flash);
if (ret) {
debug("SF: FDT decode error\n");

View file

@ -39,6 +39,27 @@ int regulator_get_value(struct udevice *dev)
}
int regulator_set_value(struct udevice *dev, int uV)
{
const struct dm_regulator_ops *ops = dev_get_driver_ops(dev);
struct dm_regulator_uclass_platdata *uc_pdata;
uc_pdata = dev_get_uclass_platdata(dev);
if (uc_pdata->min_uV != -ENODATA && uV < uc_pdata->min_uV)
return -EINVAL;
if (uc_pdata->max_uV != -ENODATA && uV > uc_pdata->max_uV)
return -EINVAL;
if (!ops || !ops->set_value)
return -ENOSYS;
return ops->set_value(dev, uV);
}
/*
* To be called with at most caution as there is no check
* before setting the actual voltage value.
*/
int regulator_set_value_force(struct udevice *dev, int uV)
{
const struct dm_regulator_ops *ops = dev_get_driver_ops(dev);
@ -61,6 +82,13 @@ int regulator_get_current(struct udevice *dev)
int regulator_set_current(struct udevice *dev, int uA)
{
const struct dm_regulator_ops *ops = dev_get_driver_ops(dev);
struct dm_regulator_uclass_platdata *uc_pdata;
uc_pdata = dev_get_uclass_platdata(dev);
if (uc_pdata->min_uA != -ENODATA && uA < uc_pdata->min_uA)
return -EINVAL;
if (uc_pdata->max_uA != -ENODATA && uA > uc_pdata->max_uA)
return -EINVAL;
if (!ops || !ops->set_current)
return -ENOSYS;

View file

@ -12,6 +12,7 @@
#include <common.h>
#include <clk.h>
#include <dm.h>
#include <dt-structs.h>
#include <errno.h>
#include <spi.h>
#include <linux/errno.h>
@ -27,6 +28,9 @@ DECLARE_GLOBAL_DATA_PTR;
#define DEBUG_RK_SPI 0
struct rockchip_spi_platdata {
#if CONFIG_IS_ENABLED(OF_PLATDATA)
struct dtd_rockchip_rk3288_spi of_plat;
#endif
s32 frequency; /* Default clock frequency, -1 for none */
fdt_addr_t base;
uint deactivate_delay_us; /* Delay to wait after deactivate */
@ -106,6 +110,14 @@ static void spi_cs_activate(struct udevice *dev, uint cs)
struct rockchip_spi_priv *priv = dev_get_priv(bus);
struct rockchip_spi *regs = priv->regs;
/* If it's too soon to do another transaction, wait */
if (plat->deactivate_delay_us && priv->last_transaction_us) {
ulong delay_us; /* The delay completed so far */
delay_us = timer_get_us() - priv->last_transaction_us;
if (delay_us < plat->deactivate_delay_us)
udelay(plat->deactivate_delay_us - delay_us);
}
debug("activate cs%u\n", cs);
writel(1 << cs, &regs->ser);
if (plat->activate_delay_us)
@ -127,9 +139,29 @@ static void spi_cs_deactivate(struct udevice *dev, uint cs)
priv->last_transaction_us = timer_get_us();
}
#if CONFIG_IS_ENABLED(OF_PLATDATA)
static int conv_of_platdata(struct udevice *dev)
{
struct rockchip_spi_platdata *plat = dev->platdata;
struct dtd_rockchip_rk3288_spi *dtplat = &plat->of_plat;
struct rockchip_spi_priv *priv = dev_get_priv(dev);
int ret;
plat->base = dtplat->reg[0];
plat->frequency = 20000000;
ret = clk_get_by_index_platdata(dev, 0, dtplat->clocks, &priv->clk);
if (ret < 0)
return ret;
dev->req_seq = 0;
return 0;
}
#endif
static int rockchip_spi_ofdata_to_platdata(struct udevice *bus)
{
struct rockchip_spi_platdata *plat = bus->platdata;
#if !CONFIG_IS_ENABLED(OF_PLATDATA)
struct rockchip_spi_platdata *plat = dev_get_platdata(bus);
struct rockchip_spi_priv *priv = dev_get_priv(bus);
const void *blob = gd->fdt_blob;
int node = bus->of_offset;
@ -153,6 +185,7 @@ static int rockchip_spi_ofdata_to_platdata(struct udevice *bus)
debug("%s: base=%x, max-frequency=%d, deactivate_delay=%d\n",
__func__, (uint)plat->base, plat->frequency,
plat->deactivate_delay_us);
#endif
return 0;
}
@ -164,6 +197,11 @@ static int rockchip_spi_probe(struct udevice *bus)
int ret;
debug("%s: probe\n", __func__);
#if CONFIG_IS_ENABLED(OF_PLATDATA)
ret = conv_of_platdata(bus);
if (ret)
return ret;
#endif
priv->regs = (struct rockchip_spi *)plat->base;
priv->last_transaction_us = timer_get_us();
@ -369,7 +407,11 @@ static const struct udevice_id rockchip_spi_ids[] = {
};
U_BOOT_DRIVER(rockchip_spi) = {
#if CONFIG_IS_ENABLED(OF_PLATDATA)
.name = "rockchip_rk3288_spi",
#else
.name = "rockchip_spi",
#endif
.id = UCLASS_SPI,
.of_match = rockchip_spi_ids,
.ops = &rockchip_spi_ops,

View file

@ -108,6 +108,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
return dm_spi_xfer(slave->dev, bitlen, dout, din, flags);
}
#if !CONFIG_IS_ENABLED(OF_PLATDATA)
static int spi_child_post_bind(struct udevice *dev)
{
struct dm_spi_slave_platdata *plat = dev_get_parent_platdata(dev);
@ -117,14 +118,16 @@ static int spi_child_post_bind(struct udevice *dev)
return spi_slave_ofdata_to_platdata(gd->fdt_blob, dev->of_offset, plat);
}
#endif
static int spi_post_probe(struct udevice *bus)
{
#if !CONFIG_IS_ENABLED(OF_PLATDATA)
struct dm_spi_bus *spi = dev_get_uclass_priv(bus);
spi->max_hz = fdtdec_get_int(gd->fdt_blob, bus->of_offset,
"spi-max-frequency", 0);
#endif
#if defined(CONFIG_NEEDS_MANUAL_RELOC)
struct dm_spi_ops *ops = spi_get_ops(bus);
@ -274,7 +277,11 @@ int spi_get_bus_and_cs(int busnum, int cs, int speed, int mode,
bool created = false;
int ret;
#if CONFIG_IS_ENABLED(OF_PLATDATA)
ret = uclass_first_device_err(UCLASS_SPI, &bus);
#else
ret = uclass_get_device_by_seq(UCLASS_SPI, busnum, &bus);
#endif
if (ret) {
printf("Invalid bus %d (err=%d)\n", busnum, ret);
return ret;
@ -290,8 +297,11 @@ int spi_get_bus_and_cs(int busnum, int cs, int speed, int mode,
debug("%s: Binding new device '%s', busnum=%d, cs=%d, driver=%s\n",
__func__, dev_name, busnum, cs, drv_name);
ret = device_bind_driver(bus, drv_name, dev_name, &dev);
if (ret)
if (ret) {
debug("%s: Unable to bind driver (ret=%d)\n", __func__,
ret);
return ret;
}
plat = dev_get_parent_platdata(dev);
plat->cs = cs;
plat->max_hz = speed;
@ -436,14 +446,18 @@ UCLASS_DRIVER(spi) = {
.id = UCLASS_SPI,
.name = "spi",
.flags = DM_UC_FLAG_SEQ_ALIAS,
#if !CONFIG_IS_ENABLED(OF_PLATDATA)
.post_bind = dm_scan_fdt_dev,
#endif
.post_probe = spi_post_probe,
.child_pre_probe = spi_child_pre_probe,
.per_device_auto_alloc_size = sizeof(struct dm_spi_bus),
.per_child_auto_alloc_size = sizeof(struct spi_slave),
.per_child_platdata_auto_alloc_size =
sizeof(struct dm_spi_slave_platdata),
#if !CONFIG_IS_ENABLED(OF_PLATDATA)
.child_post_bind = spi_child_post_bind,
#endif
};
UCLASS_DRIVER(spi_generic) = {

View file

@ -23,10 +23,19 @@ int display_enable(struct udevice *dev, int panel_bpp,
const struct display_timing *timing)
{
struct dm_display_ops *ops = display_get_ops(dev);
struct display_plat *disp_uc_plat;
int ret;
if (!ops || !ops->enable)
return -ENOSYS;
return ops->enable(dev, panel_bpp, timing);
ret = ops->enable(dev, panel_bpp, timing);
if (ret)
return ret;
disp_uc_plat = dev_get_uclass_platdata(dev);
disp_uc_plat->in_use = true;
return 0;
}
int display_read_timing(struct udevice *dev, struct display_timing *timing)
@ -48,6 +57,13 @@ int display_read_timing(struct udevice *dev, struct display_timing *timing)
return edid_get_timing(buf, ret, timing, &panel_bits_per_colour);
}
bool display_in_use(struct udevice *dev)
{
struct display_plat *disp_uc_plat = dev_get_uclass_platdata(dev);
return disp_uc_plat->in_use;
}
UCLASS_DRIVER(display) = {
.id = UCLASS_DISPLAY,
.name = "display",

View file

@ -132,8 +132,8 @@ static const u32 csc_coeff_default[3][4] = {
static void hdmi_set_clock_regenerator(struct rk3288_hdmi *regs, u32 n, u32 cts)
{
u8 cts3;
u8 n3;
uint cts3;
uint n3;
/* first set ncts_atomic_write (if present) */
n3 = HDMI_AUD_N3_NCTS_ATOMIC_WRITE;
@ -199,7 +199,7 @@ static void hdmi_audio_set_samplerate(struct rk3288_hdmi *regs, u32 pixel_clk)
static void hdmi_video_sample(struct rk3288_hdmi *regs)
{
u32 color_format = 0x01;
u8 val;
uint val;
val = HDMI_TX_INVID0_INTERNAL_DE_GENERATOR_DISABLE |
((color_format << HDMI_TX_INVID0_VIDEO_MAPPING_OFFSET) &
@ -256,7 +256,7 @@ static void hdmi_video_packetize(struct rk3288_hdmi *regs)
u32 output_select = HDMI_VP_CONF_OUTPUT_SELECTOR_BYPASS;
u32 remap_size = HDMI_VP_REMAP_YCC422_16BIT;
u32 color_depth = 0;
u8 val, vp_conf;
uint val, vp_conf;
/* set the packetizer registers */
val = ((color_depth << HDMI_VP_PR_CD_COLOR_DEPTH_OFFSET) &
@ -297,7 +297,7 @@ static void hdmi_video_packetize(struct rk3288_hdmi *regs)
output_select);
}
static inline void hdmi_phy_test_clear(struct rk3288_hdmi *regs, u8 bit)
static inline void hdmi_phy_test_clear(struct rk3288_hdmi *regs, uint bit)
{
clrsetbits_le32(&regs->phy_tst0, HDMI_PHY_TST0_TSTCLR_MASK,
bit << HDMI_PHY_TST0_TSTCLR_OFFSET);
@ -382,7 +382,7 @@ static void hdmi_phy_sel_interface_control(struct rk3288_hdmi *regs,
static int hdmi_phy_configure(struct rk3288_hdmi *regs, u32 mpixelclock)
{
ulong start;
u8 i, val;
uint i, val;
writel(HDMI_MC_FLOWCTRL_FEED_THROUGH_OFF_CSC_BYPASS,
&regs->mc_flowctrl);
@ -481,8 +481,8 @@ static int hdmi_phy_init(struct rk3288_hdmi *regs, uint mpixelclock)
static void hdmi_av_composer(struct rk3288_hdmi *regs,
const struct display_timing *edid)
{
u8 mdataenablepolarity = 1;
u8 inv_val;
bool mdataenablepolarity = true;
uint inv_val;
uint hbl;
uint vbl;
@ -553,7 +553,7 @@ static void hdmi_av_composer(struct rk3288_hdmi *regs,
/* hdmi initialization step b.4 */
static void hdmi_enable_video_path(struct rk3288_hdmi *regs)
{
u8 clkdis;
uint clkdis;
/* control period minimum duration */
writel(12, &regs->fc_ctrldur);
@ -580,7 +580,7 @@ static void hdmi_enable_video_path(struct rk3288_hdmi *regs)
/* workaround to clear the overflow condition */
static void hdmi_clear_overflow(struct rk3288_hdmi *regs)
{
u8 val, count;
uint val, count;
/* tmds software reset */
writel((u8)~HDMI_MC_SWRSTZ_TMDSSWRST_REQ, &regs->mc_swrstz);
@ -614,7 +614,7 @@ static void hdmi_audio_fifo_reset(struct rk3288_hdmi *regs)
static void hdmi_init_interrupt(struct rk3288_hdmi *regs)
{
u8 ih_mute;
uint ih_mute;
/*
* boot up defaults are:
@ -650,11 +650,11 @@ static void hdmi_init_interrupt(struct rk3288_hdmi *regs)
writel(HDMI_IH_PHY_STAT0_HPD, &regs->ih_phy_stat0);
}
static u8 hdmi_get_plug_in_status(struct rk3288_hdmi *regs)
static int hdmi_get_plug_in_status(struct rk3288_hdmi *regs)
{
u8 val = readl(&regs->phy_stat0) & HDMI_PHY_HPD;
uint val = readl(&regs->phy_stat0) & HDMI_PHY_HPD;
return !!(val);
return !!val;
}
static int hdmi_wait_for_hpd(struct rk3288_hdmi *regs)
@ -753,7 +753,7 @@ static int hdmi_read_edid(struct rk3288_hdmi *regs, int block, u8 *buff)
return edid_read_err;
}
static u8 pre_buf[] = {
static const u8 pre_buf[] = {
0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00,
0x04, 0x69, 0xfa, 0x23, 0xc8, 0x28, 0x01, 0x00,
0x10, 0x17, 0x01, 0x03, 0x80, 0x33, 0x1d, 0x78,
@ -899,7 +899,8 @@ static int rk_hdmi_probe(struct udevice *dev)
rk_setreg(&priv->grf->soc_con6, 1 << 15);
/* hdmi data from vop id */
rk_setreg(&priv->grf->soc_con6, (vop_id == 1) ? (1 << 4) : (1 << 4));
rk_clrsetreg(&priv->grf->soc_con6, 1 << 4,
(vop_id == 1) ? (1 << 4) : 0);
ret = hdmi_wait_for_hpd(priv->regs);
if (ret < 0) {

View file

@ -195,7 +195,6 @@ int rk_display_init(struct udevice *dev, ulong fbbase,
struct udevice *disp;
int ret, remote, i, offset;
struct display_plat *disp_uc_plat;
struct udevice *dev_clk;
struct clk clk;
vop_id = fdtdec_get_int(blob, ep_node, "reg", -1);
@ -222,6 +221,11 @@ int rk_display_init(struct udevice *dev, ulong fbbase,
disp_uc_plat = dev_get_uclass_platdata(disp);
debug("Found device '%s', disp_uc_priv=%p\n", disp->name, disp_uc_plat);
if (display_in_use(disp)) {
debug(" - device in use\n");
return -EBUSY;
}
disp_uc_plat->source_id = remote_vop_id;
disp_uc_plat->src_dev = dev;
@ -238,11 +242,7 @@ int rk_display_init(struct udevice *dev, ulong fbbase,
return ret;
}
ret = rockchip_get_clk(&dev_clk);
if (!ret) {
clk.id = DCLK_VOP0 + remote_vop_id;
ret = clk_request(dev_clk, &clk);
}
ret = clk_get_by_index(dev, 1, &clk);
if (!ret)
ret = clk_set_rate(&clk, timing.pixelclock.typ);
if (ret) {
@ -316,6 +316,10 @@ static int rk_vop_probe(struct udevice *dev)
/*
* Try all the ports until we find one that works. In practice this
* tries EDP first if available, then HDMI.
*
* Note that rockchip_vop_set_clk() always uses NPLL as the source
* clock so it is currently not possible to use more than one display
* device simultaneously.
*/
port = fdt_subnode_offset(blob, dev->of_offset, "port");
if (port < 0)

View file

@ -117,7 +117,8 @@ void video_sync(struct udevice *vid)
if (priv->flush_dcache) {
flush_dcache_range((ulong)priv->fb,
(ulong)priv->fb + priv->fb_size);
ALIGN((ulong)priv->fb + priv->fb_size,
CONFIG_SYS_CACHELINE_SIZE));
}
#elif defined(CONFIG_VIDEO_SANDBOX_SDL)
struct video_priv *priv = dev_get_uclass_priv(vid);

View file

@ -79,6 +79,13 @@
#define CONFIG_G_DNL_VENDOR_NUM 0x2207
#define CONFIG_G_DNL_PRODUCT_NUM 0x310a
/* usb host */
#ifdef CONFIG_CMD_USB
#define CONFIG_USB_DWC2
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_SMSC95XX
#define CONFIG_USB_ETHER_ASIX
#endif
#define ENV_MEM_LAYOUT_SETTINGS \
"scriptaddr=0x60000000\0" \
"pxefile_addr_r=0x60100000\0" \

View file

@ -27,7 +27,7 @@
"name=reserved2,size=4M,uuid=${uuid_gpt_reserved2};" \
"name=loader2,size=4MB,uuid=${uuid_gpt_loader2};" \
"name=atf,size=4M,uuid=${uuid_gpt_atf};" \
"name=boot,size=128M,bootable,uuid=${uuid_gpt_boot};" \
"name=boot,size=112M,bootable,uuid=${uuid_gpt_boot};" \
"name=rootfs,size=-,uuid=${uuid_gpt_rootfs};\0" \
#endif

View file

@ -16,10 +16,12 @@ struct display_timing;
* @source_id: ID for the source of the display data, typically a video
* controller
* @src_dev: Source device providing the video
* @in_use: Display is being used
*/
struct display_plat {
int source_id;
struct udevice *src_dev;
bool in_use;
};
/**
@ -41,6 +43,14 @@ int display_read_timing(struct udevice *dev, struct display_timing *timing);
int display_enable(struct udevice *dev, int panel_bpp,
const struct display_timing *timing);
/**
* display_in_use() - Check if a display is in use by any device
*
* @return true if the device is in use (display_enable() has been called
* successfully), else false
*/
bool display_in_use(struct udevice *dev);
struct dm_display_ops {
/**
* read_timing() - Read information directly

View file

@ -260,6 +260,16 @@ int regulator_get_value(struct udevice *dev);
*/
int regulator_set_value(struct udevice *dev, int uV);
/**
* regulator_set_value_force: set the microvoltage value of a given regulator
* without any min-,max condition check
*
* @dev - pointer to the regulator device
* @uV - the output value to set [micro Volts]
* @return - 0 on success or -errno val if fails
*/
int regulator_set_value_force(struct udevice *dev, int uV);
/**
* regulator_get_current: get microampere value of a given regulator
*