spl: move SPL_OS_BOOT to Kconfig

Move SPL_OS_BOOT to Kconfig and cleanup existing
uses.

Signed-off-by: Heiko Schocher <hs@denx.de>
This commit is contained in:
Heiko Schocher 2016-10-06 07:55:15 +02:00 committed by Tom Rini
parent 2b2c6e51e7
commit c20ae2ffaa
81 changed files with 80 additions and 39 deletions

View file

@ -381,6 +381,14 @@ config SPL_ONENAND_SUPPORT
load U-Boot from supported devices. This enables the drivers in
drivers/mtd/onenand as part of an SPL build.
config SPL_OS_BOOT
bool "Activate Falcon Mode"
depends on SPL && !TI_SECURE_DEVICE
default n
help
Enable booting directly to an OS from SPL.
for more info read doc/README.falcon
config SPL_POST_MEM_SUPPORT
bool "Support POST drivers"
depends on SPL

View file

@ -10,6 +10,7 @@ CONFIG_OF_BOARD_SETUP=y
CONFIG_BOOTDELAY=3
CONFIG_SPL=y
CONFIG_SPL_NOR_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_LOOPW=y
# CONFIG_CMD_SETEXPR is not set

View file

@ -11,6 +11,7 @@ CONFIG_SYS_EXTRA_OPTIONS="A4M2K"
CONFIG_BOOTDELAY=3
CONFIG_SPL=y
CONFIG_SPL_NOR_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_LOOPW=y
# CONFIG_CMD_SETEXPR is not set

View file

@ -1,7 +1,7 @@
CONFIG_ARM=y
CONFIG_AM33XX=y
CONFIG_TARGET_AM335X_EVM=y
# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_TARGET_AM335X_EVM=y
CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="EMMC_BOOT"
@ -9,6 +9,7 @@ CONFIG_VERSION_VARIABLE=y
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_MUSB_NEW_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n"

View file

@ -1,7 +1,7 @@
CONFIG_ARM=y
CONFIG_AM33XX=y
CONFIG_TARGET_AM335X_EVM=y
# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_TARGET_AM335X_EVM=y
CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_DEFAULT_DEVICE_TREE="am335x-boneblack"
CONFIG_FIT=y
@ -12,6 +12,7 @@ CONFIG_VERSION_VARIABLE=y
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_MUSB_NEW_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n"

View file

@ -11,6 +11,7 @@ CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_MUSB_NEW_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMLS is not set

View file

@ -10,6 +10,7 @@ CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_MUSB_NEW_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMLS is not set

View file

@ -10,6 +10,7 @@ CONFIG_SPL_STACK_R=y
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_MUSB_NEW_SUPPORT=y
CONFIG_SPL_NET_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
CONFIG_SPL_USBETH_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y

View file

@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_AM33XX=y
CONFIG_TARGET_AM335X_SHC=y
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
@ -11,6 +10,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_POWER_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_TARGET_AM335X_SHC=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_SERIES=y
CONFIG_SPL_STACK_R_ADDR=0x82000000
@ -19,6 +19,7 @@ CONFIG_FIT=y
CONFIG_VERSION_VARIABLE=y
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot# "
CONFIG_AUTOBOOT_KEYED=y

View file

@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_AM33XX=y
CONFIG_TARGET_AM335X_SHC=y
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
@ -11,6 +10,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_POWER_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_TARGET_AM335X_SHC=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_SHC_ICT=y
CONFIG_SERIES=y
@ -20,6 +20,7 @@ CONFIG_FIT=y
CONFIG_VERSION_VARIABLE=y
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_OS_BOOT=y
CONFIG_SYS_PROMPT="U-Boot# "
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Enter 'shc' to enter prompt (times out) %d \nEnter 'noautoboot' to enter prompt without timeout\n"

View file

@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_AM33XX=y
CONFIG_TARGET_AM335X_SHC=y
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
@ -12,6 +11,7 @@ CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_POWER_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_TARGET_AM335X_SHC=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_SHC_NETBOOT=y
CONFIG_SERIES=y
@ -21,6 +21,7 @@ CONFIG_FIT=y
CONFIG_VERSION_VARIABLE=y
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_OS_BOOT=y
CONFIG_SYS_PROMPT="U-Boot# "
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Enter 'shc' to enter prompt (times out) %d \nEnter 'noautoboot' to enter prompt without timeout\n"

View file

@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_AM33XX=y
CONFIG_TARGET_AM335X_SHC=y
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
@ -11,6 +10,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_POWER_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_TARGET_AM335X_SHC=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_SERIES=y
CONFIG_SPL_STACK_R_ADDR=0x82000000
@ -19,6 +19,7 @@ CONFIG_FIT=y
CONFIG_VERSION_VARIABLE=y
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_OS_BOOT=y
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Enter 'shc' to enter prompt (times out) %d \nEnter 'noautoboot' to enter prompt without timeout\n"
CONFIG_AUTOBOOT_DELAY_STR="shc"

View file

@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_AM33XX=y
CONFIG_TARGET_AM335X_SHC=y
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
@ -11,6 +10,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_POWER_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_TARGET_AM335X_SHC=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_SHC_SDBOOT=y
CONFIG_SERIES=y
@ -20,6 +20,7 @@ CONFIG_FIT=y
CONFIG_VERSION_VARIABLE=y
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_OS_BOOT=y
CONFIG_SYS_PROMPT="U-Boot# "
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Enter 'shc' to enter prompt (times out) %d \nEnter 'noautoboot' to enter prompt without timeout\n"

View file

@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_AM33XX=y
CONFIG_TARGET_AM335X_SHC=y
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
@ -11,6 +10,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_POWER_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_TARGET_AM335X_SHC=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_SHC_SDBOOT=y
CONFIG_SERIES=y
@ -20,6 +20,7 @@ CONFIG_FIT=y
CONFIG_VERSION_VARIABLE=y
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_OS_BOOT=y
CONFIG_SYS_PROMPT="U-Boot# "
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Enter 'shc' to enter prompt (times out) %d \nEnter 'noautoboot' to enter prompt without timeout\n"

View file

@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_AM33XX=y
CONFIG_TARGET_AM335X_SL50=y
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
@ -12,6 +11,7 @@ CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_POWER_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_TARGET_AM335X_SL50=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_SPL_YMODEM_SUPPORT=y
@ -20,6 +20,7 @@ CONFIG_SYS_EXTRA_OPTIONS="EMMC_BOOT"
CONFIG_VERSION_VARIABLE=y
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
# CONFIG_AUTOBOOT is not set
CONFIG_CMD_BOOTZ=y

View file

@ -11,6 +11,7 @@ CONFIG_VERSION_VARIABLE=y
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMLS is not set

View file

@ -9,6 +9,7 @@ CONFIG_SPL_ETH_SUPPORT=y
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_NET_SUPPORT=y
CONFIG_SPL_NET_VCI_STRING="AM43xx U-Boot SPL"
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMLS is not set

View file

@ -12,6 +12,7 @@ CONFIG_VERSION_VARIABLE=y
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
CONFIG_SPL_USB_HOST_SUPPORT=y
CONFIG_SPL_USB_SUPPORT=y
CONFIG_HUSH_PARSER=y

View file

@ -14,6 +14,7 @@ CONFIG_VERSION_VARIABLE=y
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_DMA_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMLS is not set

View file

@ -7,6 +7,7 @@ CONFIG_SPL_SPI_SUPPORT=y
CONFIG_VERSION_VARIABLE=y
CONFIG_SPL=y
CONFIG_SPL_DMA_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMLS is not set

View file

@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_AM33XX=y
CONFIG_TARGET_BAV335X=y
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
@ -11,6 +10,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_POWER_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_TARGET_BAV335X=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_SPL_YMODEM_SUPPORT=y
CONFIG_BAV_VERSION=1
@ -19,6 +19,7 @@ CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1"
CONFIG_VERSION_VARIABLE=y
CONFIG_SPL=y
CONFIG_SPL_MUSB_NEW_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMLS is not set

View file

@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_AM33XX=y
CONFIG_TARGET_BAV335X=y
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
@ -11,6 +10,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_POWER_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_TARGET_BAV335X=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_SPL_YMODEM_SUPPORT=y
CONFIG_BAV_VERSION=2
@ -19,6 +19,7 @@ CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1"
CONFIG_VERSION_VARIABLE=y
CONFIG_SPL=y
CONFIG_SPL_MUSB_NEW_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMLS is not set

View file

@ -5,6 +5,7 @@ CONFIG_BOOTDELAY=-2
CONFIG_VERSION_VARIABLE=y
CONFIG_SPL=y
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Cairo # "
CONFIG_CMD_BOOTZ=y

View file

@ -3,6 +3,7 @@ CONFIG_OMAP34XX=y
CONFIG_TARGET_DEVKIT8000=y
CONFIG_VERSION_VARIABLE=y
CONFIG_SPL=y
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_IMLS is not set

View file

@ -14,6 +14,7 @@ CONFIG_VERSION_VARIABLE=y
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_DMA_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_FASTBOOT=y
CONFIG_USB_FUNCTION_FASTBOOT=y

View file

@ -20,6 +20,7 @@ CONFIG_BOOTDELAY=3
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_DMA_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Ventana > "
CONFIG_CMD_BOOTZ=y

View file

@ -8,6 +8,7 @@ CONFIG_VERSION_VARIABLE=y
CONFIG_SPL=y
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_ONENAND_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMLS is not set

View file

@ -7,6 +7,7 @@ CONFIG_VERSION_VARIABLE=y
CONFIG_SPL=y
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_ONENAND_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMLS is not set

View file

@ -7,6 +7,7 @@ CONFIG_VERSION_VARIABLE=y
CONFIG_SPL=y
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_ONENAND_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMLS is not set

View file

@ -7,6 +7,7 @@ CONFIG_VERSION_VARIABLE=y
CONFIG_SPL=y
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_ONENAND_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMLS is not set

View file

@ -10,6 +10,7 @@ CONFIG_VERSION_VARIABLE=y
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_SPL=y
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot > "
# CONFIG_CMD_IMLS is not set

View file

@ -15,6 +15,7 @@ CONFIG_BOOTDELAY=-1
CONFIG_SPL=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_NOR_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot-mONStR> "
CONFIG_CMD_ASKENV=y

View file

@ -5,6 +5,7 @@ CONFIG_SYS_EXTRA_OPTIONS="NAND"
CONFIG_VERSION_VARIABLE=y
CONFIG_SPL=y
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMLS is not set

View file

@ -6,6 +6,7 @@ CONFIG_SYS_EXTRA_OPTIONS="NAND"
CONFIG_VERSION_VARIABLE=y
CONFIG_SPL=y
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="OMAP Logic # "
CONFIG_CMD_BOOTZ=y

View file

@ -4,6 +4,7 @@ CONFIG_TARGET_OMAP3_OVERO=y
CONFIG_VERSION_VARIABLE=y
CONFIG_SPL=y
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Overo # "
CONFIG_CMD_BOOTZ=y

View file

@ -6,6 +6,7 @@ CONFIG_OMAP44XX=y
CONFIG_TARGET_OMAP4_PANDA=y
CONFIG_VERSION_VARIABLE=y
CONFIG_SPL=y
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMLS is not set

View file

@ -5,6 +5,7 @@ CONFIG_OMAP44XX=y
CONFIG_TARGET_OMAP4_SDP4430=y
CONFIG_VERSION_VARIABLE=y
CONFIG_SPL=y
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMLS is not set

View file

@ -4,6 +4,7 @@ CONFIG_OMAP54XX=y
CONFIG_TARGET_OMAP5_UEVM=y
CONFIG_VERSION_VARIABLE=y
CONFIG_SPL=y
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMLS is not set

View file

@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_AM33XX=y
CONFIG_TARGET_PCM051=y
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
@ -12,6 +11,7 @@ CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_POWER_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_TARGET_PCM051=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_SPL_YMODEM_SUPPORT=y
CONFIG_SYS_EXTRA_OPTIONS="REV1"
@ -20,6 +20,7 @@ CONFIG_SPL=y
CONFIG_SPL_ETH_SUPPORT=y
CONFIG_SPL_NET_SUPPORT=y
CONFIG_SPL_NET_VCI_STRING="pcm051 U-Boot SPL"
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMLS is not set

View file

@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_AM33XX=y
CONFIG_TARGET_PCM051=y
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
@ -12,6 +11,7 @@ CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_POWER_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_TARGET_PCM051=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_SPL_YMODEM_SUPPORT=y
CONFIG_SYS_EXTRA_OPTIONS="REV3"
@ -20,6 +20,7 @@ CONFIG_SPL=y
CONFIG_SPL_ETH_SUPPORT=y
CONFIG_SPL_NET_SUPPORT=y
CONFIG_SPL_NET_VCI_STRING="pcm051 U-Boot SPL"
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMLS is not set

View file

@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_AM33XX=y
CONFIG_TARGET_PENGWYN=y
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
@ -13,6 +12,7 @@ CONFIG_SPL_NAND_SUPPORT=y
CONFIG_SPL_POWER_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_TARGET_PENGWYN=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_SPL_YMODEM_SUPPORT=y
CONFIG_VERSION_VARIABLE=y
@ -21,6 +21,7 @@ CONFIG_SPL_ETH_SUPPORT=y
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_NET_SUPPORT=y
CONFIG_SPL_NET_VCI_STRING="AM335x U-Boot SPL"
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMLS is not set

View file

@ -5,6 +5,7 @@ CONFIG_TARGET_TWISTER=y
CONFIG_FIT=y
CONFIG_BOOTDELAY=10
CONFIG_SPL=y
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="twister => "
# CONFIG_CMD_IMLS is not set

View file

@ -13,6 +13,7 @@ CONFIG_SPL_LOAD_FIT=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_SPL=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="ZynqMP> "
# CONFIG_CMD_CONSOLE is not set

View file

@ -13,6 +13,7 @@ CONFIG_SPL_LOAD_FIT=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_SPL=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="ZynqMP> "
# CONFIG_CMD_IMLS is not set

View file

@ -16,6 +16,7 @@ CONFIG_SPL_LOAD_FIT=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_SPL=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="ZynqMP> "
# CONFIG_CMD_IMLS is not set

View file

@ -11,6 +11,7 @@ CONFIG_SPL_LOAD_FIT=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_SPL=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="ZynqMP> "
# CONFIG_CMD_IMLS is not set

View file

@ -12,6 +12,7 @@ CONFIG_SPL_LOAD_FIT=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_SPL=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="ZynqMP> "
# CONFIG_CMD_IMLS is not set

View file

@ -14,6 +14,7 @@ CONFIG_SPL_LOAD_FIT=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_SPL=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="ZynqMP> "
# CONFIG_CMD_IMLS is not set

View file

@ -14,6 +14,7 @@ CONFIG_SPL_LOAD_FIT=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_SPL=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="ZynqMP> "
# CONFIG_CMD_IMLS is not set

View file

@ -7,6 +7,7 @@ CONFIG_FIT_SIGNATURE=y
CONFIG_SYS_NO_FLASH=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Zynq> "
# CONFIG_CMD_IMLS is not set

View file

@ -4,6 +4,7 @@ CONFIG_DEFAULT_DEVICE_TREE="zynq-picozed"
CONFIG_SYS_NO_FLASH=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Zynq> "
# CONFIG_CMD_IMLS is not set

View file

@ -8,6 +8,7 @@ CONFIG_FIT_SIGNATURE=y
CONFIG_SYS_NO_FLASH=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Zynq> "
# CONFIG_CMD_IMLS is not set

View file

@ -8,6 +8,7 @@ CONFIG_FIT_SIGNATURE=y
CONFIG_SYS_NO_FLASH=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Zynq> "
# CONFIG_CMD_IMLS is not set

View file

@ -8,6 +8,7 @@ CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM010"
CONFIG_SYS_NO_FLASH=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Zynq> "
# CONFIG_CMD_IMLS is not set

View file

@ -8,6 +8,7 @@ CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM011"
CONFIG_SYS_NO_FLASH=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Zynq> "
# CONFIG_CMD_IMLS is not set

View file

@ -7,6 +7,7 @@ CONFIG_FIT_SIGNATURE=y
CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM012"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Zynq> "
CONFIG_CMD_GPIO=y

View file

@ -8,6 +8,7 @@ CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM013"
CONFIG_SYS_NO_FLASH=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Zynq> "
# CONFIG_CMD_IMLS is not set

View file

@ -7,6 +7,7 @@ CONFIG_FIT_SIGNATURE=y
CONFIG_SYS_NO_FLASH=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Zynq> "
# CONFIG_CMD_IMLS is not set

View file

@ -8,6 +8,7 @@ CONFIG_FIT_SIGNATURE=y
CONFIG_SYS_NO_FLASH=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Zynq> "
# CONFIG_CMD_IMLS is not set

View file

@ -401,7 +401,6 @@
#define CONFIG_SPL_BSS_START_ADDR ((128 - 1) << 20)
#define CONFIG_SPL_BSS_MAX_SIZE (64 << 10)
#define CONFIG_SPL_OS_BOOT
/* Place patched DT blob (fdt) at this address */
#define CONFIG_SYS_SPL_ARGS_ADDR 0x01800000

View file

@ -380,7 +380,6 @@
*/
#if defined(CONFIG_SPI_BOOT)
/* SPL related */
#undef CONFIG_SPL_OS_BOOT /* Not supported by existing map */
#define CONFIG_SPL_SPI_LOAD
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000

View file

@ -123,7 +123,6 @@
#undef CONFIG_USE_IRQ
/* SPL */
#undef CONFIG_SPL_OS_BOOT /* Not supported by existing map */
#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds"
#define CONFIG_SYS_NAND_5_ADDR_CYCLE

View file

@ -54,7 +54,6 @@
#undef CONFIG_SYS_OMAP24_I2C_SPEED
#define CONFIG_SYS_OMAP24_I2C_SPEED 1000
#undef CONFIG_SPL_OS_BOOT
#ifdef CONFIG_NAND
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x00080000
#ifdef CONFIG_SPL_OS_BOOT

View file

@ -513,7 +513,6 @@ DEFAULT_LINUX_BOOT_ENV \
*/
#if defined(CONFIG_SPI_BOOT)
/* SPL related */
#undef CONFIG_SPL_OS_BOOT /* Not supported by existing map */
#define CONFIG_SPL_SPI_LOAD
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000

View file

@ -68,7 +68,6 @@
#define CONFIG_CMD_MTDPARTS
#endif /* CONFIG_SPI_BOOT, ... */
#undef CONFIG_SPL_OS_BOOT
#ifdef CONFIG_SPL_OS_BOOT
#define CONFIG_SYS_SPL_ARGS_ADDR 0x80F80000

View file

@ -19,7 +19,6 @@
#undef CONFIG_BOARD_LATE_INIT
#undef CONFIG_SPI
#undef CONFIG_OMAP3_SPI
#undef CONFIG_SPL_OS_BOOT
#undef CONFIG_BOOTCOUNT_LIMIT
#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC

View file

@ -90,7 +90,6 @@
#define CONFIG_HSMMC2_8BIT
#include <configs/ti_armv7_omap.h>
#undef CONFIG_SPL_OS_BOOT
#undef CONFIG_SYS_MONITOR_LEN
#undef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR

View file

@ -16,8 +16,6 @@
#include <configs/ti_omap5_common.h>
#undef CONFIG_SPL_OS_BOOT
/* EEPROM related defines */
#define CONFIG_SYS_I2C_OMAP34XX
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50

View file

@ -21,7 +21,6 @@
#include <configs/ti_omap4_common.h>
#undef CONFIG_SPL_OS_BOOT
#undef CONFIG_EFI_PARTITION
#undef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS

View file

@ -14,7 +14,6 @@
/* Falcon Mode */
#define CONFIG_CMD_SPL
#define CONFIG_SPL_OS_BOOT
#define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000
#define CONFIG_CMD_SPL_WRITE_SIZE (128 * SZ_1K)

View file

@ -297,7 +297,6 @@
/* add FALCON boot mode */
#define CONFIG_CMD_SPL
#define CONFIG_SPL_OS_BOOT
#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000
#define CONFIG_SYS_SPL_ARGS_ADDR LINUX_BOOT_PARAM_ADDR
#define CONFIG_CMD_SPL_NAND_OFS 0x00180000

View file

@ -292,7 +292,6 @@
#endif
/* for booting directly linux */
#define CONFIG_SPL_OS_BOOT
#define CONFIG_SYS_OS_BASE (CONFIG_SYS_FLASH_BASE + \
0x60000)

View file

@ -26,7 +26,6 @@
/* Remove SPL boot option - we do not support that on LDP yet */
#undef CONFIG_SPL_FRAMEWORK
#undef CONFIG_SPL_OS_BOOT
/* Generic NAND definition conflicts with debug_base */
#undef CONFIG_SYS_NAND_BASE

View file

@ -11,7 +11,6 @@
#include <configs/ti_am335x_common.h>
#undef CONFIG_BOARD_LATE_INIT
#undef CONFIG_SPL_OS_BOOT
/* Clock defines */
#define V_OSCK 24000000 /* Clock output from T2 */

View file

@ -275,6 +275,5 @@
#define CONFIG_SYS_THUMB_BUILD
#define CONFIG_SYS_ICACHE_OFF
#define CONFIG_SYS_DCACHE_OFF
#undef CONFIG_SPL_OS_BOOT /* Not supported by existing map */
#endif
#endif /* __CONFIG_H */

View file

@ -139,7 +139,6 @@
#if defined(CONFIG_SPL_BUILD)
/* SPL related */
#undef CONFIG_SPL_OS_BOOT /* Not supported by existing map */
#define CONFIG_SPL_SPI_LOAD
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000

View file

@ -205,9 +205,6 @@
* We also support Falcon Mode so that the Linux kernel can be booted
* directly from SPL. This is not currently available on HS devices.
*/
#if !defined(CONFIG_TI_SECURE_DEVICE)
#define CONFIG_SPL_OS_BOOT
#endif
/*
* Place the image at the start of the ROM defined image space (per

View file

@ -301,7 +301,6 @@
#include <configs/ti_armv7_common.h>
/* We wont be loading up OS from SPL for now.. */
#undef CONFIG_SPL_OS_BOOT
/* We do not have MMC support.. yet.. */
#undef CONFIG_MMC

View file

@ -42,7 +42,6 @@
#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000
#define CONFIG_CMD_SPL_NAND_OFS (CONFIG_SYS_NAND_SPL_KERNEL_OFFS+\
0x600000)
#define CONFIG_SPL_OS_BOOT
#define CONFIG_SYS_SPL_ARGS_ADDR (PHYS_SDRAM_1 + 0x100)
#define CONFIG_SPL_BOARD_INIT

View file

@ -268,7 +268,6 @@
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_RAM_DEVICE
#define CONFIG_SPL_OS_BOOT
/* u-boot is like dtb */
#define CONFIG_SPL_FS_LOAD_ARGS_NAME "u-boot.bin"
#define CONFIG_SYS_SPL_ARGS_ADDR 0x8000000

View file

@ -330,7 +330,6 @@
#endif
/* for booting directly linux */
#define CONFIG_SPL_OS_BOOT
/* SP location before relocation, must use scratch RAM */
#define CONFIG_SPL_TEXT_BASE 0x0