Commit graph

14679 commits

Author SHA1 Message Date
Simon Glass
4b37fd146b Convert CONFIG_UDP_CHECKSUM to Kconfig
This converts the following to Kconfig:
   CONFIG_UDP_CHECKSUM

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-21 14:01:34 -05:00
Simon Glass
3df6cd4d63 Convert CONFIG_KEEP_SERVERADDR to Kconfig
This converts the following to Kconfig:
   CONFIG_KEEP_SERVERADDR

Drop the preprocessor usage also.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-21 14:01:34 -05:00
Mattijs Korpershoek
b749d5ecdc configs: meson64_android: define raw parts for bootloader
Per the android documentation[1]:
- the mmc2boot0 partition should be labeled "bootloader".
- the mmc2boot1 partition should be labeled "bootenv".

Also the u-boot documentation[2] refers to a BOOT1_OFFSET of 1 block.

Define 2 raw partitions to store the bootloaders and the bootenv.

[1] https://source.android.com/setup/build/devices#vim3-fastboot
[2] https://u-boot.readthedocs.io/en/latest/board/amlogic/khadas-vim3l.html

Suggested-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20220107163913.3393563-1-mkorpershoek@baylibre.com
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2022-01-20 09:50:54 +01:00
Tom Rini
068415eade Xilinx changes for v2022.04-rc1
gpio:
 - Add modepin driver
 
 net:
 - Save random mac addresses to eth variable
 
 zynqmp gem:
 - Add support for mdio bus DT description
 - Add support for reset and SGMII phy configuration
 - Reduce timeout for MDIO accesses
 
 zynqmp clk:
 - Fix clock handling for gem and usb
 
 phy:
 - Add zynqmp phy/serdes driver
 
 serial:
 - Add one missing compatible string
 
 microblaze:
 - Symbol alignement
 - SPL fixups
 - Code cleanups
 
 zynqmp:
 - Various dt changes, DP pre-reloc, gem resets, gem clocks
 - Switch SOM to shared psu configuration
 - Move dcache handling to firmware driver
 - Workaround gmii2rgmii DT description issue
 - Enable broadcasts again
 - Change firmware enablement logic
 - Small adjustement in firmware driver
 
 versal:
 - Support new mmc@ DT nodes
 - Fix run time variable handling
 - Add missing I2C_PMC ID for power domain
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCYeg7sQAKCRDKSWXLKUoM
 IVhJAKCAiNx/joEeFBJ0XgThtJzFhCjdMwCfYKY9Ewz4L0n2I56lDgR3UJroct0=
 =HtB+
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2022.04-rc1' of https://source.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx changes for v2022.04-rc1

gpio:
- Add modepin driver

net:
- Save random mac addresses to eth variable

zynqmp gem:
- Add support for mdio bus DT description
- Add support for reset and SGMII phy configuration
- Reduce timeout for MDIO accesses

zynqmp clk:
- Fix clock handling for gem and usb

phy:
- Add zynqmp phy/serdes driver

serial:
- Add one missing compatible string

microblaze:
- Symbol alignement
- SPL fixups
- Code cleanups

zynqmp:
- Various dt changes, DP pre-reloc, gem resets, gem clocks
- Switch SOM to shared psu configuration
- Move dcache handling to firmware driver
- Workaround gmii2rgmii DT description issue
- Enable broadcasts again
- Change firmware enablement logic
- Small adjustement in firmware driver

versal:
- Support new mmc@ DT nodes
- Fix run time variable handling
- Add missing I2C_PMC ID for power domain
2022-01-19 11:43:44 -05:00
Amjad Ouled-Ameur
609983e981 board: ti: am335x: Choose CPSW or PRUSS configuration based on jumper setting
The am335x-ice-v2 board's Ethernet ports can be configured
in 'MII' or 'RMII' mode to be connected to 'PRUSS' or 'CPSW'
Ethernet subsystems.

This patch sets the environment variable 'ice_mii' to
'mii' or 'rmii' accordingly. Based on that we choose the
appropriate board devicetree i.e. 'am335x-ice-v2.dtb' or
'am335x-ice-v2-prueth.dtb'.

Since there are 2 Ethernet ports with 2 modes, there can be 4
configurations but for now we consider both ports in different modes
to be an invalid configuration and prevent boot in that case.

Signed-off-by: Roger Quadros <rogerq@ti.com>
[Amjad: use overlay instead of using new am335x-ice-v2-prueth.dtb]
Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
[trini: Make prueth_is_mii be marked __maybe_unused]
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-01-16 08:31:03 -05:00
Piotr Kubik
703f8c8451 ARM: qemu-arm: Fix build fail with boot devices disabled
BOOT_TARGET_DEVICES should only be added if the corresponding u-boot
command is enabled otherwise the build will fail.

Signed-off-by: Piotr Kubik <piotr_kubik@vp.pl>
2022-01-14 14:36:57 -05:00
Pali Rohár
1dcbcc715e arm: mvebu: Replace hardcoded values 0x0030/0x4030 by proper calculation
These hardcoded values were calculated from CONFIG_SPL_TEXT_BASE macro. Now
this macro is configurable via Kconfig, so calculate values 0x0030/0x4030
at compile time via CONFIG_SPL_TEXT_BASE option. Values 0x0030/0x4030
represents offset of CONFIG_SPL_TEXT_BASE from address 0x40000000.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-14 11:39:16 +01:00
Pali Rohár
5435f6e3fd arm: mvebu: db-88f6720: Fix CONFIG_SPL_TEXT_BASE and remove wrong memory layout
Memory layout in the comment is from Armada XP platform which uses load
address 0x40004030. DB-88f6720 is Armada 375 platform which uses same load
address as Armada 38x which is 0x40000030.

Currently SPL support for Armada 375 is unfinished and does not work. There
is missing Serdes initialization and DDR3 training code. So nobody noticed
that CONFIG_SPL_* options are not correct.

Fix at least CONFIG_SPL_TEXT_BASE constant and remove incorrect comments
about memory layout. So it is not misleading.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-14 11:39:16 +01:00
Tom Rini
fe04d885fb Merge branch 'next'
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-01-10 14:01:57 -05:00
Tom Rini
0dadad6d7c - disable CONFIG_NET_RANDOM_ETHADDR when unnecessary on amlogic based configs
- meson64_android: add board specific env settings, in order to support VIM3/L for android
 - add changes to support VIM3/L android boot by using meson64_android.h config
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAmHYV8MACgkQd9zb2sjI
 SdELkA/+LjyjJB1KI6/KLLg43zyFeeZX/SjQd5BUIx6EfaCgyTkuq2lzQnErGmbi
 HoyMoNLpBxLIL27/5TXPzmKYAeOfKPxA/sXTTtx/l7PG8ncSZIoU0+utqjycdUsK
 tSi7EdFzk7/kDDRkqqA7q9nxsPn/7GQNh/ZC9zstMXKaTO/TEb/sZWCMcvQ0MNoB
 ynZKOCg5t60UkIYIRwZwC/OS/ssn86dovv/Aa/8D6qpL2AbS5DoCXHuAr8Dnz7fJ
 q4rV7oLh7a+WHe/qC7R6ylYFIVVqY5JaIgbLDwuvk1z9o7txchMMQnGgllZ35sN9
 LECD2iSDGjhPaHuGCvQwl3TWtIpvtdcP4sQTyJhsXNPxCG6HHvRz7xY4erUohR1I
 LIddwCCHeCrBiaamXNbCzph2+JhfPSQ5ETCL9M6iBMxNUPunlCxjfjDzlT/pg11p
 EO9PIPjRMR9QhxKtd3gZpyAqPuMBEmIwhDtHI6dL3DNOOsF44ObE4swnzS6qXIDn
 jRZzFCC2f/Vyg11YnzFtV3A5eWwJahGDWAGAnnlg6Y8GCLlLmDJitcgA/rWSALko
 T5fC8L8IFUx2RnHczyitJ/wqJl9FqOAnIaoB3Trpwp8gFQ15dQjbvoXldQnAjSS2
 9bns3zOrx79EF4lbHhwNE9UDLm6OjK5vR3h4bGJvyZBmasVsA90=
 =dLEg
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20220107' of https://source.denx.de/u-boot/custodians/u-boot-amlogic into next

- disable CONFIG_NET_RANDOM_ETHADDR when unnecessary on amlogic based configs
- meson64_android: add board specific env settings, in order to support VIM3/L for android
- add changes to support VIM3/L android boot by using meson64_android.h config
2022-01-09 07:56:31 -05:00
Fabio Estevam
353aa7b06f udoo: Adjust the SD card device numbering
After the conversion to DM the SD card shows up as 'mmc 2'
device.

Adjust the 'mmcdev' and the distro command 'func' accordingly.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
2022-01-08 11:16:03 -05:00
Peter Robinson
87c34fe216 udoo_neo: Enable support for USB and storage
Enable support for USB and USB storage on the UDOO Neo.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-01-07 09:30:45 -05:00
Peter Robinson
2bbe1ba0c7 udoo_neo: Fixes for booting from the mSD card
This fixes booting from the mSD card from both SPL and when
using it for the OS booting. It also cleans up a few mmc
booting bits that are no longer needed.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-01-07 09:30:44 -05:00
Mattijs Korpershoek
425f06f86e configs: prepare khadas-vim3{l}_ab_android for AOSP support
In AOSP, both VIM3 and VIM3L have 2 bootloader flavors,
depending on A/B enablement.

For example, for vim3l, the naming is:
- u-boot_kvim3l_noab.bin : legacy support
- u-boot_kvim3l_ab.bin   : A/B support

Prepare a defconfig to support u-boot_kvim3_ab.bin and
u-boot_kvim3l_ab.bin.

This is identical to khadas-vim3{l}_ab_android but will be updated in
the next commit.

Also update partitioning tables for A/B support.

Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20211122152207.219023-4-mkorpershoek@baylibre.com
2022-01-07 10:12:43 +01:00
Mattijs Korpershoek
f89b90d2d9 configs: add khadas-vim3{l}_android for AOSP support
The Khadas VIM3 and VIM3L board are well supported in AOSP[1].
However, there is no mainline U-Boot support for it.
The U-Boot used in AOSP is based on a vendor tree [2]

Add all the necessary bits to flash and boot Android for both Khadas
VIM3 and VIM3L boards.

For Android instructions, refer to [1]

[1] https://source.android.com/setup/build/devices#vim3_and_vim3l_boards
[2] https://gitlab.com/baylibre/amlogic/atv/u-boot

Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20211122152207.219023-3-mkorpershoek@baylibre.com
2022-01-07 10:12:43 +01:00
Mattijs Korpershoek
4eff7426c9 configs: meson64_android: add board specific env settings
This allows us to define extra board variables, such as "board" and
"board_name".

Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20211122152207.219023-2-mkorpershoek@baylibre.com
2022-01-07 10:12:43 +01:00
Ovidiu Panait
83b175be16 microblaze: migrate CONFIG_SYS_USR_EXCEP to Kconfig
Migrate CONFIG_SYS_USR_EXCEP to Kconfig. Also, rename it to
XILINX_MICROBLAZE0_USR_EXCEP in order to match the naming convention of
microblaze-generic Kconfig options.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Link: https://lore.kernel.org/r/20211130163358.2531677-7-ovidiu.panait@windriver.com
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2022-01-05 10:22:03 +01:00
Ovidiu Panait
70c68712ef microblaze: drop CONFIG_SYS_RESET_ADDRESS macro
Microblaze is one the last two users of the CONFIG_SYS_RESET_ADDRESS
macro (the other is arch/powerpc/cpu/mpc8xx/cpu.c, but the macro is not
defined anywhere in powerpc code, so it should be removed there too).

Replace CONFIG_SYS_RESET_ADDRESS usage in start.S with
CONFIG_SYS_TEXT_BASE. If the reset address should really be
user-configurable, a new Kconfig option could be added.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Link: https://lore.kernel.org/r/20211130163358.2531677-6-ovidiu.panait@windriver.com
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2022-01-05 10:22:03 +01:00
Mark Kettenis
3bbd6c0152 arm: apple: Remove CONFIG_SYS_SDRAM_BASE
The memory layout is taken from the device tree passed to us by
m1n1, so there is no need to define this.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2022-01-04 22:48:49 -05:00
Peter Hoyes
439581dca4 vexpress64: Enable VIRTIO_NET network driver
The SMSC driver is using the old driver model.

Init the virtio system in vexpress64.c so that the network device is
discovered.

Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
2022-01-04 22:48:48 -05:00
Peter Hoyes
90f262a695 vexpress64: Clean up BASE_FVP boot configuration
Move env var address values to #defines so they can be reused elsewhere.

Rename env var names to those recommended in the README and modify
addresses to allow more space for the kernel.

Fix issue where fdt is called with invalid arguments when booting
without a ramdisk.

Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
2022-01-04 22:48:48 -05:00
Peter Hoyes
17fe55fd6f vexpress64: Refactor header file to make it easier to add new FVPs
Rename from vexpress_aemv8a.h -> vepxress_aemv8.h as new FVPs may not be
v8-A. No change in behavior.

This is towards future work to enable support for the FVP_BaseR.

Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
2022-01-04 22:48:48 -05:00
Linus Walleij
cc4dcd488c board: stemmy: Increase boot image to 64 MB
When using a recent kernel with a bunch of compiled-in
stuff the kernel image easily becomes bigger than 8 MB
yielding this error:

  Loading Kernel Image
  Image too large: increase CONFIG_SYS_BOOTM_LEN
  Must RESET board to recover

Fix this by bumping to SZ_64MB.

Cc: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
2022-01-04 16:58:23 -05:00
Tom Rini
5fec3c853d Pull request of efi-next
Documentation:
 
 * Add Sunxi board description
 
 UEFI:
 
 * Improvements to U-Boot running on top of UEFI
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAmHOp5gACgkQxIHbvCwF
 GsTonA//Y8wwlaXA1TD6B0fIEcQiZucDJQD0nbHugx+1xw/7w9wHX1qfM4Tskqc4
 y4RA3QyoyUp7tvesP6/EA3mAUSEUp0nrtLPyCJjjXV1lrOaXhwvbdqrhOCqUQLen
 h6RNjhujVtbC90wBWYPal3Ip0hdIUROe3qp9Mk2p4zAru8jBEShn+PTRIeHvf6UV
 9BZ8j9LCivC7hUAG3Cyv+KFhW1s47IN54WddedIREEWk4vIdrUMRLjW/kW8ZbDxx
 gi1Eec25Rte6+p5k/+TJkvCwA8GC1kW+MFMYWxcAARZlUd0yr/S6ru5yaW8km0KQ
 kKgcYGp878hVB41JFEhiGUf9CkwU2oo+3NZGIfNv/vG45J4UppyqNffm9c3ZudWC
 S6DqRVPSp1YQEs45SIVZGx+LK6s1iTBn3DJ/dX68NavuUIYX2nnveUBgtW5vdzGf
 ba0yh4a0EU36hcjd2o3y3sEAjiy+PF8SAZ+f2HQ7JaLjsCWF1zNFGsiAxaEStHp8
 aVrUN0cWQPKnnI2A8DCqjmMaSBDKZDK59k6EeC1ZFdMmGivHEO61A0sDiUTz+IRW
 U7XLvjAA5IVKAtij6T/iab6qvhgwABJRL9lZI5DMiFxJRSl4uSYe9YviG7+EzUg0
 XMIs5nK6jBB74HPKqhBouiSUiRa9UHY/rdyNhJACHQ8GODzCf04=
 =YdSB
 -----END PGP SIGNATURE-----

Merge tag 'efi-next' of https://source.denx.de/u-boot/custodians/u-boot-efi into next

Pull request of efi-next

Documentation:

* Add Sunxi board description

UEFI:

* Improvements to U-Boot running on top of UEFI
2021-12-31 07:28:36 -05:00
Simon Glass
13bfaab3da efi: Allow easy selection of serial-only operation
Add info about how to select vidconsole or serial.

Also set up a demo boot command.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-31 07:18:56 +01:00
Tom Rini
87a9aa604d - various fixes to the sandbox display support
- support for showing a logo without splash screen config
 - support for BMP drawing to depths other than 16bpp
 - tests for the different types of supported BMP images
 - support showing a logo when running coreboot via qemu
 -----BEGIN PGP SIGNATURE-----
 
 iGwEABECACwWIQSC4hxrSoIUVfFO0kRM6ATMmsalXAUCYcsdCQ4cYWd1c3RAZGVu
 eC5kZQAKCRBM6ATMmsalXCLhAJ9pLJE3SpQRzpm+Nu4EMbCDzZKr+wCfbxnAZ9LC
 zS1XZ6u9Se4ysDb+PYs=
 =Hf5j
 -----END PGP SIGNATURE-----

Merge tag 'video-next-20211228' of https://source.denx.de/u-boot/custodians/u-boot-video into next

- various fixes to the sandbox display support
- support for showing a logo without splash screen config
- support for BMP drawing to depths other than 16bpp
- tests for the different types of supported BMP images
- support showing a logo when running coreboot via qemu
2021-12-28 11:28:31 -05:00
Tom Rini
968c6210e6 Convert CONFIG_JFFS2_DEV et al to Kconfig
This converts the following to Kconfig:
   CONFIG_JFFS2_DEV
   CONFIG_JFFS2_LZO
   CONFIG_JFFS2_NAND
   CONFIG_JFFS2_PART_OFFSET
   CONFIG_JFFS2_PART_SIZE

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:19 -05:00
Tom Rini
b2d1c828b9 Convert CONFIG_KIRKWOOD_GPIO to Kconfig
This converts the following to Kconfig:
   CONFIG_KIRKWOOD_GPIO

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:19 -05:00
Tom Rini
440c00de69 Convert CONFIG_SYS_KWD_CONFIG to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_KWD_CONFIG

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:19 -05:00
Tom Rini
f98b3be287 Convert CONFIG_88F5182 et al to Kconfig
This converts the following to Kconfig:
   CONFIG_88F5182
   CONFIG_BOARD_IS_OPENRD_BASE
   CONFIG_BOARD_IS_OPENRD_CLIENT
   CONFIG_BOARD_IS_OPENRD_ULTIMATE
   CONFIG_D2NET_V2
   CONFIG_FEROCEON
   CONFIG_FEROCEON_88FR131
   CONFIG_INETSPACE_V2
   CONFIG_KW88F6192
   CONFIG_KW88F6281
   CONFIG_KW88F6702
   CONFIG_NET2BIG_V2
   CONFIG_NETSPACE_LITE_V2
   CONFIG_NETSPACE_MAX_V2
   CONFIG_NETSPACE_MINI_V2
   CONFIG_NETSPACE_V2
   CONFIG_SHEEVA_88SV131

At this point mv-plug-common.h is now only an include of mv-common.h so
remove that indirection.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:19 -05:00
Tom Rini
e7b7c6761a Convert CONFIG_CPU_FREQ_HZ to Kconfig
This converts the following to Kconfig:
   CONFIG_CPU_FREQ_HZ

Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:19 -05:00
Tom Rini
855e76b5cb Convert CONFIG_CPU_SH7751 to Kconfig
This converts the following to Kconfig:
   CONFIG_CPU_SH7751

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:19 -05:00
Tom Rini
3aca2b6bd7 Convert CONFIG_CPU_PXA27X to Kconfig
This converts the following to Kconfig:
   CONFIG_CPU_PXA27X

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:19 -05:00
Tom Rini
6328f95ea0 serial: arm_dcc: Use CONFIG_ARM64 not CONFIG_CPU_ARMV8
The only place we use CONFIG_CPU_ARMV8 was in the arm_dcc serial driver.
Switch this to CONFIG_ARM64 today, and if in the future we need finer
granularity tuning here, a new CONFIG_SERIAL option needs to be
introduced.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:18 -05:00
Tom Rini
7e11f95b02 Convert CONFIG_SYS_I2C_EEPROM_ADDR_LEN to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_I2C_EEPROM_ADDR_LEN

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:18 -05:00
Tom Rini
3569ac7afa ppc: mpc83xx: Remove unused CONFIG symbols
Neither of these symbols are referenced anywhere else, so remove them.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:18 -05:00
Tom Rini
86e4c4f7b3 Convert CONFIG_83XX_PCICLK to Kconfig
This converts the following to Kconfig:
   CONFIG_83XX_PCICLK

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:18 -05:00
Tom Rini
2f8a6db5d8 Finish conversion of CONFIG_SYS_CLK_FREQ to Kconfig
In order to finish moving this symbol to Kconfig for all platforms, we
need to do a few more things.  First, for all platforms that define this
to a function, introduce CONFIG_DYNAMIC_SYS_CLK_FREQ, similar to
CONFIG_DYNAMIC_DDR_CLK_FREQ and populate clock_legacy.h.  This entails
also switching all users from CONFIG_SYS_CLK_FREQ to get_board_sys_clk()
and updating a few preprocessor tests.

With that done, all platforms that define a value here can be converted
to Kconfig, and a fall-back of zero is sufficiently safe to use (and
what is used today in cases where code may or may not have this
available).  Make sure that code which calls this function includes
<clock_legacy.h> to get the prototype.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:18 -05:00
Tom Rini
e4c3ce7e28 CONFIG_SYS_CLK_FREQ: Consistently be static or get_board_sys_clk()
This CONFIG option is used in one of two ways.  The first way is that it
is defined to a static value, of an unsigned long size.  The second way
is that it is defined to something, typically a function, to determine
this value at run time.

However, in a few cases that function returns a static value.  Change
that to using the static value directly.

In the case of using something at run time, convert everything to using
a function of the same name and prototype.  This will allow for further
cleanups.

Finally, we have a few cases where the function is just not used, so
drop it.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:18 -05:00
Tom Rini
2196a4a7ef arm: s5pc1xx: Move CONFIG_SYS_CLK_FREQ_C1x0 out of CONFIG namespace
The values CONFIG_SYS_CLK_FREQ_C100 and CONFIG_SYS_CLK_FREQ_C110 are
only used in one place and not changed by the board config file.  Move
these out of the CONFIG namespace and in to the CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:18 -05:00
Tom Rini
ba1ed5b022 Convert CONFIG_ARCH_MAP_SYSMEM to Kconfig
This converts the following to Kconfig:
   CONFIG_ARCH_MAP_SYSMEM

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:18 -05:00
Tom Rini
9ec4df336e Convert CONFIG_SYS_NAND_U_BOOT_OFFS to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_NAND_U_BOOT_OFFS

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:18 -05:00
Tom Rini
1b46518736 Convert CONFIG_TPL_TEXT_BASE to Kconfig
This converts the following to Kconfig:
   CONFIG_TPL_TEXT_BASE

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:18 -05:00
Tom Rini
ed35de6170 Convert CONFIG_ZYNQMP_PSU_INIT_ENABLED to Kconfig
This converts the following to Kconfig:
   CONFIG_ZYNQMP_PSU_INIT_ENABLED

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:18 -05:00
Tom Rini
068c41f1cc Finish conversion CONFIG_SYS_NAND_SELF_INIT to Kconfig
In order to finish this conversion we need to add a symbols for
SPL_SYS_NAND_SELF_INIT and TPL_SYS_NAND_SELF_INIT as there are cases
there where we need to, or need to not, use that framework as things
stand.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:18 -05:00
Tom Rini
bfb5387fe9 Convert CONFIG_TEGRA_NAND to Kconfig
This converts the following to Kconfig:
   CONFIG_TEGRA_NAND

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:18 -05:00
Tom Rini
ada261f19a Finish converting CONFIG_SYS_FSL_CLK to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_FSL_CLK

We move the exiting option to common/Kconfig near the other options to
control the contents of board_init_f() and note that this is a legacy
option.  We further restrict this to where the call is going to be
non-empty, for the SoCs that had only been using this for some
MMC-related clocks.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:18 -05:00
Tom Rini
6880b330a9 warp7, pic32mzdask: Remove SYS_FDT_ADDR/SYS_ENV_ADDR from CONFIG namespace
In the case of CONFIG_SYS_FDT_ADDR this was being used to modify the
default value of fdt_addr / fdt_addr_r, which is not something to expose
in this manner and is not otherwise done.  The case of SYS_ENV_ADDR is
similar but only done on the pic32mzdask platform, for scriptaddr.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:18 -05:00
Tom Rini
7856cd5a6d Convert CONFIG_SYS_PCI_64BIT to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_PCI_64BIT

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:17 -05:00
Tom Rini
d06e4b7e25 Finish CONFIG_VID et al conversion to Kconfig
This converts the following to Kconfig:
   CONFIG_VID
   CONFIG_VOL_MONITOR_INA220
   CONFIG_VOL_MONITOR_IR36021_READ
   CONFIG_VOL_MONITOR_IR36021_SET
   CONFIG_VOL_MONITOR_LTC3882_READ
   CONFIG_VOL_MONITOR_LTC3882_SET

To finish this migration, we first need to introduce CONFIG_SPL_VID as
some platforms only use this code in full U-Boot while others use it in
SPL as well.  To make the Kconfig logic clearer, guard all of the
sub-options with a if VID || SPL_VID check.  Finally, add Kconfig
options for the remaining related options that did not previously have
one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 08:41:38 -05:00
Tom Rini
be7dbb60c5 Convert CONFIG_SYS_IMMR to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_IMMR

We do this by consolidating the SYS_IMMR options we have and providing
defaults.

We also, in the few places where M68K was also sharing code with these
platforms, define it within the file to CONFIG_SYS_MBAR to match usage.
This should be cleaned up longer term.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 08:41:38 -05:00
Tom Rini
ff27af1244 Convert CONFIG_SYS_MEMTEST_START et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_MEMTEST_START
   CONFIG_SYS_MEMTEST_END

This is removing unused defines and correcting the default value to be
0x0 as we are a hex symbol.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 08:41:38 -05:00
Tom Rini
82edd73762 Convert CONFIG_WATCHDOG_TIMEOUT_MSECS to Kconfig
This converts the following to Kconfig:
   CONFIG_WATCHDOG_TIMEOUT_MSECS

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 08:41:38 -05:00
Tom Rini
3847ba94f0 Finish converting CONFIG_WATCHDOG, HW_WATCHDOG and WDT to Kconfig
Because of how these symbols work, and the remaining board config.h file
uses, we need to do these at the same time.  In some cases we just get
to move rather directly to the defconfigs.  A few cases require manual
intervention.

For the case of the eb_cpu5282 we need to select HW_WATCHDOG for the
target, given how it's implemented.

For the cases of m53menlo, dh_imx6, display5, and display5_factory we
disable SPL watchdog support as the particular combination of options
they want would require either more symbols or enabling SPL_DM.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 08:41:38 -05:00
Tom Rini
4d69303299 Convert CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT

In order to do this conversion, expose this option to the user and
use "save" not "safe" in the text.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 08:41:38 -05:00
Tom Rini
d5bfef2fcd Convert CONFIG_SUPPORT_EMMC_RPMB to Kconfig
This converts the following to Kconfig:
   CONFIG_SUPPORT_EMMC_RPMB

This fixes a few platforms where the option was not taking effect as
intended.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 08:41:38 -05:00
Tom Rini
de35b8f9c5 Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace
This option is used as part of configuring the default environment for a
number of platforms.  However, it is always set to 1 and the only time
it is part of Kconfig, it is used in a hard-coded manner.  Hard-code the
value in the environment instead.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 08:41:38 -05:00
Tom Rini
f76750d111 Convert CONFIG_CONS_INDEX et al to Kconfig
This converts the following to Kconfig:
   CONFIG_CONS_INDEX
   CONFIG_DEBUG_UART_CLOCK
   CONFIG_FSL_TZPC_BP147
   CONFIG_GENERIC_ATMEL_MCI
   CONFIG_IDENT_STRING
   CONFIG_LIBATA
   CONFIG_LNX_KRNL_IMG_TEXT_OFFSET_BASE
   CONFIG_LPC32XX_GPIO
   CONFIG_MP
   CONFIG_MPC8XXX_GPIO
   CONFIG_MTD_PARTITIONS
   CONFIG_MVGBE
   CONFIG_MXC_GPIO
   CONFIG_NR_DRAM_BANKS
   CONFIG_OF_BOARD_SETUP
   CONFIG_OF_STDOUT_VIA_ALIAS
   CONFIG_OF_SYSTEM_SETUP
   CONFIG_PREBOOT
   CONFIG_ROCKCHIP_SERIAL
   CONFIG_RTC_ENABLE_32KHZ_OUTPUT
   CONFIG_RTC_MV
   CONFIG_SCSI_AHCI
   CONFIG_SF_DEFAULT_BUS
   CONFIG_SF_DEFAULT_CS
   CONFIG_SF_DEFAULT_SPEED
   CONFIG_SOFT_SPI
   CONFIG_SPI_FLASH_EON
   CONFIG_SPI_FLASH_MACRONIX
   CONFIG_SPI_FLASH_MTD
   CONFIG_SPI_FLASH_SPANSION
   CONFIG_SPI_FLASH_SST
   CONFIG_SPI_FLASH_STMICRO
   CONFIG_SUPPORT_RAW_INITRD
   CONFIG_SYS_ARCH_TIMER
   CONFIG_SYS_BOARD
   CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
   CONFIG_SYS_DCACHE_OFF
   CONFIG_SYS_FDT_SAVE_ADDRESS
   CONFIG_SYS_FLASH_CFI
   CONFIG_SYS_FSL_ERRATUM_ESDHC135
   CONFIG_SYS_HAS_SERDES
   CONFIG_SYS_L2CACHE_OFF
   CONFIG_SYS_LITTLE_ENDIAN
   CONFIG_SYS_LOAD_ADDR
   CONFIG_SYS_MMCSD_FS_BOOT_PARTITION
   CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION
   CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR
   CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
   CONFIG_SYS_NS16550
   CONFIG_SYS_PLLFIN
   CONFIG_SYS_SPI_U_BOOT_OFFS
   CONFIG_TIMER_SYS_TICK_CH
   CONFIG_USB_EHCI_FSL
   CONFIG_U_QE
   CONFIG_VERSION_VARIABLE

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 08:41:38 -05:00
Tom Rini
98ab831da7 Convert CONFIG_FSL_IFC to Kconfig
This converts the following to Kconfig:
   CONFIG_FSL_IFC

This is done via select statements to match previous logic.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 08:40:33 -05:00
Tom Rini
7e6a6fd821 Convert CONFIG_ENV_SPI_BUS et al to Kconfig
This converts the following to Kconfig:
   CONFIG_ENV_SPI_BUS
   CONFIG_ENV_SPI_CS
   CONFIG_ENV_SPI_MAX_HZ
   CONFIG_ENV_SPI_MODE

As part of this, we use Kconfig to provide the defaults now that were
done in include/spi_flash.h.  We also in some cases change from using
CONFIG_ENV_SPI_FOO to CONFIG_SF_DEFAULT_FOO as those were the values in
use anyhow as ENV was not enabled.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 08:40:33 -05:00
Tom Rini
936c8559df arm: Drop unused tam3517-common.h
With the relevant platforms removed, drop this file.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 08:40:33 -05:00
Simon Glass
e567122b32 x86: coreboot: Support getting a logo from virtio
Enable this feature so that a splash screen can be provided.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-26 23:33:26 +01:00
Simon Glass
64cfeda8ae video: Convert CONFIG_VIDEO_LOGO to Kconfig
This converts the following to Kconfig:
   CONFIG_VIDEO_LOGO

Note that this option depends on CONFIG_DM_VIDEO now, since cfb_console is
deprecated. The only relevant code is now in splash.c

Drop the check for DM_VIDEO in that file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-26 23:24:46 +01:00
Nico Cheng
daec31e5cc rockchip: Kconfig: Enable SPL support for rk3568
Enable SPL support in Kconfig and add some related option in
rk3568_common.h

Signed-off-by: Nico Cheng <nico.cheng@rock-chips.com>
Signed-off-by: Jason Zhu <jason.zhu@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-12-24 11:10:24 +08:00
Tom Rini
4afab30cae Prepare v2022.01-rc4
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAmHArDwACgkQFHw5/5Y0
 tyzxyAv/SjZjoEwG8nu7ptVZqTsZfm+tVwwWmQEBAA40MXy/KSccDtbUwB5GCO6f
 Uvk+qFFDbCkbGZh5VKbQusMmUoB02Xu9zUoSxKxcXL4WfC6Bg5GV/UWN9s8G3Tm6
 4wcP0l8WFcQjjr89UfXugiZH58psvFu6PBbWVY4rMH9gZ5ds0AkNOF0L+HbdVmMR
 a5HBfrcySRY2kiTQuKF+RVlMW6BtaOqJp/XIyy8w6bH09ykMomj/u7z3JP3y9ZzL
 w3FXqCLlIEnvdDcqfWvfjoJ/gm0WcLulgSVpTFGS0jgJpnbeAURtZcuVgj6aPRUW
 FRon+u0tj3wpFjibs2cpyXWd+gw/bLLFpDXx78AUAPjxG31tEKbnR1j8R8wBZJ0B
 TqWZ3pCne/LPOT90y2KW2z6ty2n/yEn6qEFFT9MN9R4L0N+U0er//sYJC/nn/e6u
 fjvQ9OPLbnAfHVrad3ZeIkePrLOIF6XYwNQpsjt9aE2kU9IvV5sTa8TxZuQgasBU
 A46FgXtC
 =MEG2
 -----END PGP SIGNATURE-----

Merge tag 'v2022.01-rc4' into next

Prepare v2022.01-rc4
2021-12-20 17:12:04 -05:00
Simon Glass
6405ab7ad5 Convert CONFIG_PHYSMEM to Kconfig
This converts the following to Kconfig:
   CONFIG_PHYSMEM

Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Sean Anderson <seanga2@gmail.com>
2021-12-17 09:44:59 -07:00
Tom Rini
e09ca91cfa - enable RPi Zero 2 W
- fix MMC numbering issue
 - Update link to documentation
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEUdvKHhzqrUYPB/u8L21+TfbCqH4FAmG6FZ8SHG1icnVnZ2Vy
 QHN1c2UuY29tAAoJEC9tfk32wqh+NigQAK+M5odbqCXRyMhdJzkP7bccQ80dFA/3
 aGcAfPMd6qIqm75Z5iqAhBLjiR4WQ79Amswu5B/HthLaelurHe21/hDEXBxmCvI3
 dUw1u702kyxHFoU0bKHhtR/+RNsJq7TYuFdAwE1xsjRvO/UAaEyll85euC9ZxrR4
 1llrqt0qKtMEQzS4XRAiODl3Nv2o/9ckFKsJYuk8XVpaYnjiG+hk/v+LlyVVEWqY
 dCCiSIDVKYFtaamee54qvi6cuCp4JjWW+XS9a6Yz8V6kfsHVrW42Xcm4oIiyAffQ
 CUDZr2350WcldO7NNS1pB78jAYmCam/eVFnDkji+0BqwgPzYu7eBCz2biCjF4W4T
 ZujSfPlHapnE84/RHKqc3w6W1uukJEFV3t2P72VZoFCJ8SxcBmyOTteDeYt/TFfn
 iiWOw5TiGOQnthc7YtbTWtQ1R1EzpxESgyYfzbRAEmyWu7VkwXuM2Lz9gJjDKOvz
 PkOrjxeOT/VH1x3GbmcGJNfY9MMzNcbLBr0LTJ+n/PLCzW3zqJOm+SjMHp7P2Lb5
 awEgrYtkkyYidkq8SdHAHfUf2nd2eR5XEtbDcyr9t9CDTaK0KJpWOdYr15E4Y0bk
 fiLP9z0Q2pN7OqcPAoMdrhdql80UBZJYo5rFGbj/m++L0GMZRAoWELschVMCjpu4
 7pOro6+it1v0
 =xnZF
 -----END PGP SIGNATURE-----

Merge tag 'rpi-next-2022.01' of https://source.denx.de/u-boot/custodians/u-boot-raspberrypi

- enable RPi Zero 2 W
- fix MMC numbering issue
- Update link to documentation
2021-12-15 11:49:30 -05:00
Tom Rini
cfbd2bc695 - enable KSZ90x1 PHY driver on DHCOR
- DHSOM boards:
   - increase USB power-good delay
   - add update_sf script to install U-Boot into SF
   - increase PHY auto-negotiation timeout to 20 seconds
   - fix SoM and board coding strap GPIO handling
 -----BEGIN PGP SIGNATURE-----
 
 iQJQBAABCgA6FiEEXyrViUccKBz9c35Jysd4L3sz/6YFAmG3TqYcHHBhdHJpY2Uu
 Y2hvdGFyZEBmb3NzLnN0LmNvbQAKCRDKx3gvezP/puhJEACl9lNg7+0GDd6eoi73
 NR4+r1JYPDkYKbbBWjHVueIwKYbpk1uSzYLB70lchUVbdvu3fczJc7uOXTDRnrCN
 13BuMa45HAWxvb/9UuHz3AnrLEsSvEgGCRCXK0FrE0mu1yBZK+6iO1ysuQEJA78j
 7tyBs6i+IzuAusejx8NiqjYughIFZKBzfztLe3OSxDhEam+vCCEAIUoTx7FSq1jp
 TumZULkfx0SCSL86vPnzczjtucrtKiaWhjNLDbg0Ilf28qYYTCdlDcpi7ySpr43u
 VJTAKAXYVQq4Ye3qsth6GSsTZ1pONBoSaaOo2z/hoQu+/Y4+yUrzkLB+0dSrqgsW
 FPosN9/OPSRcBIfhFEV9RojhHK9OxYXr0WjBctb6fZKzHK52neVv819Ixy5WBJvq
 gXo6jK78ILxzOUx1PzRj2safKhArAuPrxD2Lv0wNKqNCWJJZbT037L6p5CFG30UI
 7yltaYm1ukAT6q6MeergHAAcdgYV+nyFOUs7udQY5HltzLpBJkdIGHKJpioAhvYJ
 KNHMwANd499/edL/FdXXN7X8sfb7ylaUaqDfkHPJgfDDFmF4lQ591k+jWeD8H1lo
 LYUhd4/7EvNAS02fvwmrdTWYCCFyxL1HFxwOlFqrkthFJnJj70shBJsB786pvihq
 wd9npDIUFJGSTCTA4uXCu3YHlA==
 =Qgdj
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20211213' of https://source.denx.de/u-boot/custodians/u-boot-stm

- enable KSZ90x1 PHY driver on DHCOR
- DHSOM boards:
  - increase USB power-good delay
  - add update_sf script to install U-Boot into SF
  - increase PHY auto-negotiation timeout to 20 seconds
  - fix SoM and board coding strap GPIO handling

# gpg verification failed.
2021-12-13 10:20:25 -05:00
Marek Vasut
e1d7b0b9c5 ARM: stm32: Increase PHY auto-negotiation timeout to 20s on DHSOM
The Micrel PHYs on known DHSOM based boards take a while to come out
of reset, increase the auto-negotiation timeout to prevent it from
timing out in case the ethernet is used right after the board was
reset.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-12-13 14:33:59 +01:00
Marek Vasut
44beea2845 ARM: stm32: Add update_sf script to install U-Boot into SF on DHSOM
Add script to read U-Boot from SD card and write it to matching
locations in the SPI NOR, thus making the SPI NOR bootable. The
script erases the entire SPI NOR, including U-Boot environment,
to make sure the installation is clean. To retain environment
from current running U-Boot, run 'saveenv' after running the
'update_sf' script.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-12-13 14:33:53 +01:00
Marek Vasut
e8e66801bd ARM: stm32: Increase USB power-good delay on DHSOM
The USB hub on STM32MP1 DHCOM boards needs to wait a bit longer until
the USB Vbus is stable. Increase the USB power-good delay to 1 s.

This adds default-undefined STM32MP_BOARD_EXTRA_ENV variable into
stm32mp15_common.h to reduce duplication in board-specific config
files adding custom environment.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-12-13 14:33:47 +01:00
Adam Ford
d5f1beb058 configs: beacon-rzg2m: Config to address new aliases
The resync of the device trees from Linux 5.16-rc3 caused aliases
to appear on the MMC devices which changed the numbering.
This changed the default boot device and caused boot failure.
Update the mmcdev variable to reflect the new aliases.

Signed-off-by: Adam Ford <aford173@gmail.com>
2021-12-13 00:37:28 +01:00
Simon Glass
7ee2016d61 ide: Drop unused CONFIG options
CONFIG_SYS_ATA_PORT_ADDR is not used in the code anymore. Drop it and use
ATA_PORT_ADDR() locally instead.

Drop CONFIG_IDE_RESET_ROUTINE and CONFIG_IDE_SWAP_IO which are also
unused.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-05 09:26:26 -07:00
Simon Glass
36cc7bfd54 sandbox: Drop CONFIG_SYS_TIMER_RATE
This is not used by sandbox since it uses driver model for the timer.

Drop it.

Also update the tools_only build to avoid build errors, since it does
actually build U-Boot too. Enable DM so we can use CONFIG_TIMER,
disable EFI_LOADER to avoid an error about board_quiesce_devices() and
disable NET to avoid having to define CONFIG_AVB_BUF_ADDR

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-05 09:26:26 -07:00
Simon Glass
93e1edffb0 Convert CONFIG_KEYBOARD to Kconfig
This converts the following to Kconfig:
   CONFIG_KEYBOARD

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-05 09:26:26 -07:00
Simon Glass
5ae2578a55 Convert CONFIG_SYS_FDT_LOAD_ADDR to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_FDT_LOAD_ADDR

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-05 09:23:15 -07:00
Simon Glass
32c8566f13 sandbox: Drop CONFIG_HOST_MAX_DEVICES
This can go in the related header file. Drop the CONFIG option.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-12-05 09:23:15 -07:00
Leo Yu-Chi Liang
666da85dc9 board: ae350: Support autoboot from RAM
Add boot command "bootcmd_ram" to support autoboot from RAM.

This feature could be useful at the very initial state of chip design
when there is only a minimal set of peripheral. (e.g. without mmc and mac ..etc)

The kernel image is default to be loaded at 0x2000000 via debug port,
and the following script serves as an example:

spl()
{
	cmd="riscv64-linux-gdb -q \
	-ex \"target remote $host:$port\" \
	-ex \"load\" \
	-ex \"thread apply all set \\\$pc=&_start\" \
	-ex \"thread apply all set \\\$a0=\\\$mhartid\" \
	-ex \"thread apply all set \\\$a1=<dtb address>\" \
	-ex \"restore u-boot.itb binary 0x200000\" \
	-ex \"restore Image binary 0x2000000\" \
	-ex \"c\" \
	spl/u-boot-spl
	"

	echo $cmd
	eval $cmd
}

The address where the kernel is loaded can be altered by
changing the value of KERNEL_IMAGE_ADDR.

Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Rick Chen <rick@andestech.com>
2021-12-02 16:43:45 +08:00
Tom Rini
33b02e93ec Convert CONFIG_FSL_DDR_BIST et al to Kconfig
This converts the following to Kconfig:
   CONFIG_FSL_DDR_BIST
   CONFIG_FSL_DDR_INTERACTIVE

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-01 10:58:11 -05:00
Tom Rini
c7fad78ec0 Convert CONFIG_SYS_BR0_PRELIM et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_BR0_PRELIM
   CONFIG_SYS_OR1_PRELIM
   CONFIG_SYS_BR1_PRELIM
   CONFIG_SYS_OR2_PRELIM
   CONFIG_SYS_BR2_PRELIM
   CONFIG_SYS_OR2_PRELIM
   CONFIG_SYS_BR3_PRELIM
   CONFIG_SYS_OR3_PRELIM
   CONFIG_SYS_BR4_PRELIM
   CONFIG_SYS_OR4_PRELIM
   CONFIG_SYS_BR5_PRELIM
   CONFIG_SYS_OR5_PRELIM
   CONFIG_SYS_BR6_PRELIM
   CONFIG_SYS_OR6_PRELIM
   CONFIG_SYS_BR7_PRELIM
   CONFIG_SYS_OR7_PRELIM

This also introduces CONFIG_SYS_BR0_PRELIM_BOOL as not all platforms
that can set these values do so.  Add the relevant SYS_BRx_PRELIM_BOOL
to platforms that had not been previously migrated.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-01 10:58:10 -05:00
Tom Rini
970bf8603b Convert CONFIG_USE_BOOTCOMMAND et al to Kconfig
This converts the following to Kconfig:
   CONFIG_USE_BOOTCOMMAND
   CONFIG_BOOTCOMMAND
   CONFIG_RAMBOOTCOMMAND
   CONFIG_NFSBOOTCOMMAND

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-01 10:58:10 -05:00
Patrick Delaunay
d71587c2ab Convert CONFIG_LCD_DT_SIMPLEFB to Kconfig
This converts the following to Kconfig:
   CONFIG_LCD_DT_SIMPLEFB

This patch also renames this config to CONFIG_FDT_SIMPLEFB as the code in
common/lcd_simplefb.c support CONFIG_LCD and CONFIG_VIDEO.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
2021-11-30 16:43:28 +01:00
Marek Vasut
5e3e882cf2 ARM: stm32: Increase PHY auto-negotiation timeout to 20s on DHSOM
The Micrel PHYs on known DHSOM based boards take a while to come out
of reset, increase the auto-negotiation timeout to prevent it from
timing out in case the ethernet is used right after the board was
reset.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-30 16:43:27 +01:00
Marek Vasut
1aba8e51d8 ARM: stm32: Add update_sf script to install U-Boot into SF on DHSOM
Add script to read U-Boot from SD card and write it to matching
locations in the SPI NOR, thus making the SPI NOR bootable. The
script erases the entire SPI NOR, including U-Boot environment,
to make sure the installation is clean. To retain environment
from current running U-Boot, run 'saveenv' after running the
'update_sf' script.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-30 16:41:21 +01:00
Marek Vasut
15e20e4bdf ARM: stm32: Increase USB power-good delay on DHSOM
The USB hub on STM32MP1 DHCOM boards needs to wait a bit longer until
the USB Vbus is stable. Increase the USB power-good delay to 1 s.

This adds default-undefined STM32MP_BOARD_EXTRA_ENV variable into
stm32mp15_common.h to reduce duplication in board-specific config
files adding custom environment.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-11-30 16:41:21 +01:00
Mike Karels
874e544e89 Fix MMC numbering issue for Raspberry Pi 3
Using mmc.dtbo from rpi-firmware to switch the controller for the SD
card slot from sdhci to sdhost causes the numbering to change; the
SD card is then not recognized at boot.  Add to the range checked.

Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2021-11-30 16:07:40 +01:00
Tom Rini
2402c93130 Prepare v2022.01-rc3
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAmGk/4sACgkQFHw5/5Y0
 tyyjtgwAo0jCRa1Vyc5z2RrINGdARoPhNcCnBNMYEVTjH9uP0/Mzlpo4i1IWX5qP
 nEuVmP01KjtWDRNy7Cpr45/j2PkTZ0THqXGZKpTG/yALdUKZw0wbzeh/CMllWh0A
 9yJfMbv2/IV79rbb6osxItjusSr5PnrU5fHsR+zUfC8NRZpzWGfpH8a6NpfGvGYo
 3OUKNJrGv930C3MqVnUEHPIuz+vL9fWLSs/rK/JHVZt+ALU45uYtz4cKycMoElVd
 IUJe3mhKhw0k8dO8R+p3UAEFrP+LZdcBLgCt8wRQK6Yl4lcxYOtZgYuJuM9Kp20s
 abqIuky3TWwFjpNM60Gmo63Yf967jOeI/lfITq2juZ5TBlNKOO6Z/NRVUsHkNKFG
 7qJC14/NxuSdN4u9s2h+rJBBGYc+BzWVO/ikigHnsCeFQYfafJpGTnPSJr55OU5X
 eeB6l3blx6jwxOPAz0JhLecZb4e027R+eKionirMEnVPENtnJjF1d+CulkekahUO
 LvdqKaBE
 =h4j5
 -----END PGP SIGNATURE-----

Merge tag 'v2022.01-rc3' into next

Prepare v2022.01-rc3

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-29 12:00:57 -05:00
Neil Armstrong
28f70cfcfd configs: meson64_android: add PANIC stage for SYSTEM fails
If bootloader was updated without running oem format, reboot will cause
boot loop because the SYSTEM stage fails.

Add a final PANIC stage running fastboot to permit recovery.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2021-11-19 18:15:26 +01:00
Neil Armstrong
bdc68df4dd configs: meson64_android: bypass other checks on run_fastboot=1
This can lead to GPT and BCB errors even if fastboot was selected early
by usb rom boot and the eMMC is blank/invalid.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2021-11-19 18:15:26 +01:00
Chia-Wei Wang
e3cdc2cbb1 configs: ast2600: Boot kernel FIT in DRAM
AST2600 leverages the FIT hash/signature verification to fulfill
secure boot trust chain. To improve the performance and save SW
code size for those crypto operations, the two HW crypto engine,
HACE and ACRY, are enabled.

However, both of the engines can only access to data stored in
DRAM space. Therefore, we need to move the FIT image into DRAM
before the booting.

This patch update the CONFIG_BOOTCOMMAND to execute the pre-defined
ENV variable which consists of FIT image copy to memory and booting.

Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
2021-11-17 17:05:57 -05:00
Chia-Wei Wang
3aeb239f51 configs: aspeed: Make EXTRA_ENV_SETTINGS board specific
Move CONFIG_EXTRA_ENV_SETTINGS to board-specific
configuration headers.

Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
2021-11-17 17:05:57 -05:00
Simon Glass
f501bb4c2a sandbox: Use a text-based environment
Use a text file for the environment instead of the #define settings.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
2021-11-16 14:35:08 -05:00
Simon Glass
79c0e8a935 sandbox: Drop distro_boot
This is a complicated set of #defines and it is painful to convert to a
text file. We can (once pending patches are applied) provide the same
functionality with bootmethod. Drop this for sandbox to allow conversion
to a text-file environment.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
2021-11-16 14:35:08 -05:00
Masami Hiramatsu
4d492b0c0f configs: synquacer: Fix dfu_alt_info to use nor1
Fix dfu_alt_info to use nor1 instead of the device name.
This reverts a part of commit 59bd18d4c4 ("configs: synquacer:
Remove mtdparts settings and update DFU setting") because the
commit a4f2d83414 ("mtd: spi: nor: force mtd name to "nor%d"")
changed the mtd device naming scheme to nor%d.

Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-11-15 14:33:32 -05:00
Matthias Schiffer
a5e305256b board: tq: fix spelling of "TQ-Systems"
"TQ-Systems" is written with a dash.

Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
2021-11-15 14:33:32 -05:00
Tom Rini
82cd1e3da0 Convert CONFIG_LAST_STAGE_INIT to Kconfig
This converts the following to Kconfig:
   CONFIG_LAST_STAGE_INIT

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12 14:18:17 -05:00
Tom Rini
d3fb2e3991 Remove CONFIG_SERIAL_MULTI
This symbol has been functionally dead for a long time.  Remove the last
and recent re-introductions of setting it, and update the whitelist so
it will not be re-introduced again.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12 14:18:17 -05:00
Tom Rini
1914075c88 Convert CONFIG_PL011_SERIAL et al to Kconfig
This converts the following to Kconfig:
   CONFIG_PL011_SERIAL
   CONFIG_PL01X_SERIAL

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12 14:18:17 -05:00
Tom Rini
b8475e6aca Convert CONFIG_MACB to Kconfig
This converts the following to Kconfig:
   CONFIG_MACB

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12 14:18:17 -05:00
Tom Rini
dfb34d0d4a Convert CONFIG_MD5 to Kconfig
This converts the following to Kconfig:
   CONFIG_MD5

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12 14:18:17 -05:00
Tom Rini
8a25b8b5b4 Convert CONFIG_MX6 et al to Kconfig
This converts the following to Kconfig:
   CONFIG_MX6
   CONFIG_MX7

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12 14:18:17 -05:00
Tom Rini
b70b2bed1a Convert CONFIG_IMX_BOOTAUX et al to Kconfig
This converts the following to Kconfig:
   CONFIG_IMX_BOOTAUX
   CONFIG_IMX_THERMAL

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12 14:18:17 -05:00
Tom Rini
99e6feb23c Convert CONFIG_SYS_PROMPT et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_PROMPT
   CONFIG_SYS_PROMPT_HUSH_PS2

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12 14:18:17 -05:00
Tom Rini
21e0432058 Convert CONFIG_I2C_EDID et al to Kconfig
This converts the following to Kconfig:
   CONFIG_I2C_EDID
   CONFIG_I2C_EEPROM

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12 14:18:17 -05:00
Tom Rini
8bd39de9b1 Convert CONFIG_PHYLIB et al to Kconfig
This converts the following to Kconfig:
   CONFIG_PHYLIB
   CONFIG_PHY_ATHEROS
   CONFIG_PHY_GIGE
   CONFIG_MII

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12 14:18:17 -05:00
Tom Rini
406257ae41 Convert CONFIG_MISC_INIT_F et al to Kconfig
This converts the following to Kconfig:
   CONFIG_MISC_INIT_F
   CONFIG_MISC_INIT_R

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12 14:18:17 -05:00
Tom Rini
53b3df4e0c Convert CONFIG_TRACE et al to Kconfig
This converts the following to Kconfig:
   CONFIG_TRACE
   CONFIG_TRACE_BUFFER_SIZE
   CONFIG_TRACE_EARLY
   CONFIG_TRACE_EARLY_ADDR
   CONFIG_TRACE_EARLY_SIZE

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12 14:18:17 -05:00
Tom Rini
c745299156 Convert CONFIG_SYS_CONSOLE_IS_IN_ENV to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_CONSOLE_IS_IN_ENV

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12 14:18:17 -05:00
Tom Rini
27480e0a9f Convert CONFIG_ENV_IS_IN_SPI_FLASH et al to Kconfig
This converts the following to Kconfig:
   CONFIG_ENV_IS_IN_SPI_FLASH
   CONFIG_ENV_IS_NOWHERE
   CONFIG_ENV_OFFSET
   CONFIG_ENV_OVERWRITE
   CONFIG_ENV_SECT_SIZE
   CONFIG_SYS_MMC_ENV_DEV
   CONFIG_SYS_MMC_ENV_PART

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12 14:18:17 -05:00
Tom Rini
1ed68f9204 Convert CONFIG_FSL_USDHC to Kconfig
This converts the following to Kconfig:
   CONFIG_FSL_USDHC

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12 14:18:17 -05:00
Tom Rini
75c995a1be Convert CONFIG_FSL_LAYERSCAPE to Kconfig
This converts the following to Kconfig:
   CONFIG_FSL_LAYERSCAPE

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12 14:18:17 -05:00
Tom Rini
45e19cf378 Convert CONFIG_BITBANGMII to Kconfig
This converts the following to Kconfig:
   CONFIG_BITBANGMII

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12 14:18:16 -05:00
Tom Rini
b67f54b10b Convert CONFIG_DOS_PARTITION to Kconfig
This converts the following to Kconfig:
   CONFIG_DOS_PARTITION

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12 14:18:16 -05:00
Tom Rini
a8f31121fb Convert CONFIG_E1000 to Kconfig
This converts the following to Kconfig:
   CONFIG_E1000

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12 14:18:16 -05:00
Tom Rini
b8260c1715 Convert CONFIG_ARCH_CPU_INIT to Kconfig
This converts the following to Kconfig:
   CONFIG_ARCH_CPU_INIT

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12 14:18:16 -05:00
Tom Rini
1e72ad6b38 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq
- device-tree sync-up with Linux for ls1028a
- fixes/update in fsl-ddr driver, fsl-validate, lx2162a, fsl-mc,
  spintable code, configs, qspi node, pci
- enable EFI_SET_TIME support in sl28
- powerpc: Drop -mstring
2021-11-11 09:04:20 -05:00
Tom Rini
166a77b34b - DHSOM update:
- Remove nWP GPIO hog
    - Increase SF bus frequency to 50Mhz and enable SFDP
    - Disable video output for DHSOM
    - Disable EFI
    - Enable DFU_MTD support
 - Create include file for STM32 gpio driver private data
 - Split board and SOC STM32MP15 configuration
 - Device tree alignement with v5.15-rc6 for STM32MP15
 - Add binman support for STM32MP15x
 - Normalise newlines for stm32prog
 - Update OTP shadow registers in SPL
 -----BEGIN PGP SIGNATURE-----
 
 iQJQBAABCgA6FiEEXyrViUccKBz9c35Jysd4L3sz/6YFAmGL7ykcHHBhdHJpY2Uu
 Y2hvdGFyZEBmb3NzLnN0LmNvbQAKCRDKx3gvezP/pl1iD/45ARfQCdlq5Iq8VbAf
 NV1TjRguoLU6zR5XhyGAIoDkg87Bsty2ayFyAfz8pHkpEQAFkj9bhiaRZEQj2SSi
 avb2slYGC6iLBEgVBfHjnih4hf0JPTJWcCx+0IO298IknJ49qFfujBFdb3LCbXzt
 zc6QE4mvWWdQHQfNym5UjHqJvI2seHbarEmltAQNn1hqYevFFQYH6vMtgYtZGH18
 c63HeW6uDuGdxGJ9/dzuV/M5bZUAQOI2jJ9OFv7UYQyrzkvLd4M5Qeb52OZ7xNYZ
 xNPCUtNnWUMUnGlpb/ANIUtqBYfcBj1iOMedchLtL9EANObFew/ktk0L1mdjLpQ4
 neB8Im6KmcZkzPyNDs4ha8bSiwOGhrSMg+B49bpp01JvnmzMW3cFtexXL6nKAZyL
 Iohv5MNp7Cf4Fn68v04RBzrAzcvBNPQUnN/19VMN+bqidAzN9y9N7Jc8JgVSOEWN
 OU45X5N840CjqWr8xZ9znICqCdgnY4QtCI9zi6JLHuvWMG3+c10fzyozRfh/OWkE
 3RSyjf9zSjlzYsOEIe8e5Kz/FqLhYqrhdJz2Aqoz5E3k7YQke8WU/OadOU7BWs5U
 QoIMpq8jcAiNZqoMW/V5pxW2nqIB4VIX7LDYuT2TEnVt+hhLP59NtzFTMEjY68Rk
 cH+alF5WHbnqIXgMh5BokUwgxA==
 =lqEG
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20211110' of https://source.denx.de/u-boot/custodians/u-boot-stm

- DHSOM update:
   - Remove nWP GPIO hog
   - Increase SF bus frequency to 50Mhz and enable SFDP
   - Disable video output for DHSOM
   - Disable EFI
   - Enable DFU_MTD support
- Create include file for STM32 gpio driver private data
- Split board and SOC STM32MP15 configuration
- Device tree alignement with v5.15-rc6 for STM32MP15
- Add binman support for STM32MP15x
- Normalise newlines for stm32prog
- Update OTP shadow registers in SPL
2021-11-10 14:11:30 -05:00
Patrick Delaunay
f42045b2e7 stm32mp15: replace CONFIG_TFABOOT when it is possible
In some part of STM32MP15 support the CONFIG_TFABOOT can be replaced
by other config: CONFIG_ARMV7_PSCI and CONFIG_ARM_SMCCC.

This patch also simplifies the code in cpu.c, stm32mp1_ram.c and
clk_stml32mp1.c as execution of U-Boot in sysram (boot without SPL and
without TFA) is not supported: the associated initialization code is
present only in SPL.

This cleanup patch is a preliminary step to support SPL load of OP-TEE
in secure world, with SPL in secure world and U-Boot in no-secure world.

Reported-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-10 17:07:31 +01:00
Patrick Delaunay
c67ca25dfc board: stmp32mp1: split board and SOC STM32MP15 configuration
Add a configuration file "stm32mp15_st_common.h" to handle the
STMicroelectronics boards configuration and rename stm32mp1.h to
"stm32mp15_common.h" to handle the generic STM32MP15x series configuration.

The configuration file "dh_stm32mp1.h" is also renamed to
"stm32mp15_dh_dhcom" for the configuration of board based on the
dhelectronics STM32MP15x SOM.

In the STMicroelectronics board configuration the default bootcmd
"bootcmd_stm32mp" is updated to only select the extlinux file found on
SD-Card on STM32MP15x EV1 for boot from NOR device.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-11-10 17:03:36 +01:00
Tom Rini
e8e9c6f484 Merge https://source.denx.de/u-boot/custodians/u-boot-samsung
[trini: Migrate CONFIG_EXYNOS7420 as part of merging, so espresso7420
still builds]

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-09 15:05:33 -05:00
Rajesh Bhagat
a97a071d10 configs: fsl: migrate FMAN/QE specific defines to Kconfig
Use moveconfig.py script to convert CONFIG_SYS_FMAN_FW_ADDR,
CONFIG_SYS_QE_FW_ADDR and CONFIG_SYS_QE_FMAN_FW_LENGTH to Kconfig and
move these entries to defconfigs.

Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
[Rebased]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-11-09 17:18:23 +05:30
Kuldeep Singh
266e68be75 configs: ls1046aqds: Move CONFIG_SPI_FLASH_* definitions to defconfigs
LS1046A-QDS has CONFIG_SPI_FLASH_SST, CONFIG_SPI_FLASH_EON and
CONFIG_SPI_FLASH_STMICRO defines present in header. Move these entries
from header to defconfigs.

Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
[Rebased]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-11-09 17:18:23 +05:30
Michael Walle
ed30254ef6 board: sl28: enable EFI UpdateCapsule support
Enable support for update over EFI UpdateCapsule mechanism. This board
doesn't support setting EFI variables after ExitBootservices().
Therefore, we are also enabling EFI_IGNORE_OSINDICATIONS.

Signed-off-by: Michael Walle <michael@walle.cc>
[Rebased]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-11-09 14:49:01 +05:30
Meenakshi Aggarwal
b2a6ccd4dd lx2162a : Rename emmc boot command variable
Rename emmc_bootcmd environment variable to sd2_bootcmd
to fix emmc boot on lx2162aqds board.

Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-11-09 14:43:24 +05:30
Simon Glass
1834c081d3 efi: Add video support to the app
The current EFI video driver only works when running in the stub. In that
case the stub calls boot services (before jumping to U-Boot proper) and
copies the graphics info over to the efi table. This is necessary because
the stub exits boot services before jumping to U-Boot.

The app maintains access to boot services throughout its life, so does not
need to do this. Update the driver to support calling boot services
directly.

Enable video output for the app. Note that this uses the
EFI_GRAPHICS_OUTPUT_PROTOCOL protocol, even though it mentions vesa.

A sample qemu command-line for this case is:

   qemu-system-x86_64 -bios /usr/share/edk2.git/ovmf-ia32/OVMF-pure-efi.fd
   -drive id=disk,file=try.img,if=none,format=raw -nic none
   -device ahci,id=ahci -device ide-hd,drive=disk,bus=ahci.0

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-11-07 18:36:55 +01:00
Tom Rini
5523afbe4a Convert CONFIG_BOARD_EARLY_INIT_F et al to Kconfig
This converts the following to Kconfig:
   CONFIG_BOARD_EARLY_INIT_F
   CONFIG_BOARD_LATE_INIT
   CONFIG_DISPLAY_BOARDINFO
   CONFIG_DISPLAY_BOARDINFO_LATE

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-05 11:26:29 -04:00
Tom Rini
1616626417 Convert CONFIG_SPL_DRIVERS_MISC et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SPL_DRIVERS_MISC
   CONFIG_SPL_ENV_SUPPORT
   CONFIG_SPL_GPIO
   CONFIG_SPL_I2C
   CONFIG_SPL_LDSCRIPT
   CONFIG_SPL_LIBCOMMON_SUPPORT
   CONFIG_SPL_LIBGENERIC_SUPPORT
   CONFIG_SPL_LOAD_FIT_ADDRESS
   CONFIG_SPL_MMC
   CONFIG_SPL_NAND_SUPPORT
   CONFIG_SPL_NO_CPU_SUPPORT
   CONFIG_SPL_OS_BOOT
   CONFIG_SPL_POWER
   CONFIG_SPL_STACK_R
   CONFIG_SPL_STACK_R_ADDR
   CONFIG_SPL_WATCHDOG
   CONFIG_SPL_TEXT_BASE

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-05 11:26:29 -04:00
Tom Rini
4ca10b9ee5 Convert CONFIG_BMP_16BPP to Kconfig
This converts the following to Kconfig:
   CONFIG_BMP_16BPP

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-05 11:23:29 -04:00
Tom Rini
4d7a3f52d0 Convert CONFIG_OF_EMBED to Kconfig
This converts the following to Kconfig:
   CONFIG_OF_EMBED

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Rick Chen <rick@andestech.com>
2021-11-05 11:23:29 -04:00
Tom Rini
74337aa450 Convert CONFIG_MCFUART to Kconfig
This converts the following to Kconfig:
	CONFIG_MCFUART

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-05 11:23:29 -04:00
Tom Rini
61e1972e73 Convert CONFIG_FEC_MXC to Kconfig
This converts the following to Kconfig:
	CONFIG_FEC_MXC

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-05 11:23:29 -04:00
Tom Rini
bca1bce92a Convert CONFIG_SUPPORT_EMMC_BOOT to Kconfig
This converts the following to Kconfig:
	CONFIG_SUPPORT_EMMC_BOOT

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-05 11:23:29 -04:00
Tom Rini
465547bddf Convert CONFIG_SYS_TEXT_BASE to Kconfig
This converts the following to Kconfig:
	CONFIG_SYS_TEXT_BASE

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-05 11:23:29 -04:00
Tom Rini
1a77da4b33 Convert CONFIG_SYS_HZ to Kconfig
This converts the following to Kconfig:
	CONFIG_SYS_HZ

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-05 11:23:29 -04:00
Dzmitry Sankouski
69bde0410a SoC: exynos: add support for exynos 78x0
Samsung Exynos 7880 \ 7870 - SoC for mainstream smartphones and tablets
introduced on March 2017.
Features:
- 8 Cortex A53 cores
- ARM Mali-T830 MP3 GPU
- LTE Cat. 7 (7880) or 6 (7870) modem

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
2021-10-31 11:25:39 -04:00
Dzmitry Sankouski
80565ec6f0 board: samsung: add Samsung Galaxy S9/S9+(SM-G96x0) board
Samsung S9 SM-G9600 - Snapdragon SDM845 version of the phone,
for China \ Hong Kong markets.
Has unlockable bootloader, unlike SM-G960U (American market version),
which allows running u-boot as a chain-loaded bootloader.

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
Cc: Tom Rini <trini@konsulko.com>
2021-10-31 11:25:38 -04:00
Dzmitry Sankouski
4cbc16ceb2 SoC: qcom: add support for SDM845
Hi-end qualcomm chip, introduced in late 2017.
Mostly used in flagship phones and tablets of 2018.
Features:
- arm64 arch
- total of 8 Kryo 385 Gold / Silver cores
- Hexagon 685 DSP
- Adreno 630 GPU

Tested only as second-stage bootloader.

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Stephan Gerhold <stephan@gerhold.net>
2021-10-31 08:46:44 -04:00
Mark Kettenis
003b657edc arm: apple: Add initial support for Apple's M1 SoC
Add support for Apple's M1 SoC that is used in "Apple Silicon"
Macs.  This builds a basic U-Boot that can be used as a payload
for the m1n1 boot loader being developed by the Asahi Linux
project.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
[trini: Add MAINTAINERS entry]
2021-10-31 08:46:44 -04:00
Tom Rini
397b35f097 Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sunxi
- Add and enable watchdog driver
- Prepare for SYSRESET driven AXP poweroff
- Prepare for SoCs without MMC2
- Some fixes for extending SPL (SPL-DM for RISC-V)
- Some preparations for proper VBUS management
- Fix secure monitor move
2021-10-25 12:09:57 -04:00
Tom Rini
35a7677e38 u-boot-imx-20211022
-------------------
 
 CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/9561
 
 - i.MX8:
 	- Toradex Verdin (switch to binman, cleanup, etc.)
 	- Phytec phycore_imx8mm (fixes, boot from SPI-NOR)
 	- fixes for imx8mp_evk
 - doc (i.MX): MX8MM with Fast boot
 - i.MX6:
 	- Toradex : colibri-imx6ull with eMMC, fixes
 - i.MX7ULP :
 	- preparation for OPTEE + Serial Number
 - generic:
 	- imx8m_image: Support ddr3 firmware
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCYXat2A8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76ZMQQCeO3RELcie75bMjKbazAYLcfXvmm0AniuuWM/0
 gtxxC0ObQue2LpkQMAVU
 =plVt
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20211022' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

u-boot-imx-20211022
-------------------

CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/9561

- i.MX8:
	- Toradex Verdin (switch to binman, cleanup, etc.)
	- Phytec phycore_imx8mm (fixes, boot from SPI-NOR)
	- fixes for imx8mp_evk
- doc (i.MX): MX8MM with Fast boot
- i.MX6:
	- Toradex : colibri-imx6ull with eMMC, fixes
- i.MX7ULP :
	- preparation for OPTEE + Serial Number
- generic:
	- imx8m_image: Support ddr3 firmware
2021-10-25 09:54:36 -04:00
Samuel Holland
00f82fcfba sunxi: A23/A33/H3: Actually move the secure monitor
commit 1ebfc0c631 ("sunxi: A23/A33/H3: Move sun8i secure monitor to
SRAM A2") attempted to move the secure monitor to SRAM A2. But not all
sun8i SoCs have SRAM A2, so a check was put in for SUNXI_SRAM_A2_SIZE to
avoid breaking the other SoCs.

However, because the header providing SUNXI_SRAM_A2_SIZE was not
included, this unintentionally skipped the new definitions on all SoCs.
Fix this by including the right header.

Fixes: 1ebfc0c631 ("sunxi: A23/A33/H3: Move sun8i secure monitor to SRAM A2")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-25 14:49:42 +01:00
Ye Li
127fb45495 imx8mp_evk: Delete noncached memory config
DWC EQOS driver has removed to use noncached memory, so delete
the configuration from iMX8MP EVK head file.

Signed-off-by: Ye Li <ye.li@nxp.com>
2021-10-21 13:59:26 +02:00
Stefano Babic
5fac11e6d5 Merge branch 'master' of git://git.denx.de/u-boot
Signed-off-by: Stefano Babic <sbabic@denx.de>
2021-10-21 13:58:13 +02:00
Tom Rini
f200a4bcec Merge https://source.denx.de/u-boot/custodians/u-boot-marvell
- Turris MOX and Omnia changes, mostly moving to Kconfig (Marek)
- a37xx: pci: Misc smaller fixes (Pali)
- cmd: tlv_eeprom: Fix building with DEBUG enabled (Sven)
- termios_linux.h: Fix tcsendbreak() implementation (Pali)
- mvebu: Add missing "if SPL" (Tom)
2021-10-21 07:52:15 -04:00
Marek Behún
6d7bfb658e arm: mvebu: turris_omnia: Move CONFIG_SPL_DRIVERS_MISC to Kconfig
Instead of declaring CONFIG_SPL_DRIVERS_MISC in board config header,
select it in Kconfig.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-21 07:39:05 +02:00
Marek Behún
2c8a4e4d76 arm: mvebu: turris_omnia: Move SPL's SYS_MALLOC_SIMPLE to Kconfig
Instead of declaring CONFIG_SYS_MALLOC_SIMPLE dependant on
CONFIG_SPL_BUILD in board config header, select
CONFIG_SPL_SYS_MALLOC_SIMPLE in Kconfig.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-21 07:39:05 +02:00
Marek Behún
ba89abd028 arm: mvebu: turris_mox: Cosmetic update for board config header
Reorder the definitions in Turris MOX' board config header, drop the
comment relics from when this file was copied, fix indentation.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-21 07:39:05 +02:00
Marek Behún
a3b055fc70 arm: kirkwood, mvebu: Remove CONFIG_SYS_RESET_ADDRESS option
This option is not used anywhere.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-21 07:39:05 +02:00
Marek Behún
999ac22b59 arm: mvebu: a3720: Create Kconfig option for I2C_MV
Move the config option CONFIG_I2C_MV to a Kconfig option
CONFIG_SYS_I2C_MV and move the default definition from config header
files into defconfigs.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-21 07:39:05 +02:00
Marek Behún
3c36d745a8 arm: mvebu: turris_mox: Move options to defconfig
Move config options CONFIG_LAST_STAGE_INIT and
CONFIG_DISPLAY_BOARDINFO_LATE to turris_mox_defconfig.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-21 07:39:05 +02:00
Tom Rini
79b8849d4c u-boot-imx-20211020
-------------------
 
 First PR from u-boot-imx for 2022.01
 
 CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/9535
 
 - new board: kontron-sl-mx8mm
 - imx8m:
 	- fix secure boot
 - imx ESDHC: fixes
 - i.MX53: Support thum2, bmode and fixes for Menlo board
 	  usbarmory switch to Ethernet driver model
 - imx6 :
 	- DDR calibration for Toradex boards
 - imx7:
 	- Fixes
 - Updated gateworks boards (ventana / venice)
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCYXAPLA8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76ZZdwCfQBZyd9IWYk3vY0lYgCZsBYl8oXoAn0o9BjVu
 tMJRAcFOLxegM4CJAeqC
 =zg72
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20211020' of https://source.denx.de/u-boot/custodians/u-boot-imx

u-boot-imx-20211020
-------------------

First PR from u-boot-imx for 2022.01

CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/9535

- new board: kontron-sl-mx8mm
- imx8m:
	- fix secure boot
- imx ESDHC: fixes
- i.MX53: Support thum2, bmode and fixes for Menlo board
	  usbarmory switch to Ethernet driver model
- imx6 :
	- DDR calibration for Toradex boards
- imx7:
	- Fixes
- Updated gateworks boards (ventana / venice)

# gpg verification failed.
2021-10-20 14:24:09 -04:00
Max Krummenacher
80ef6926e7 colibri-imx6ull: add emmc variant
Add code to build the eMMC variant of the Colibri iMX6ULL, i.e. the
'Colibri iMX6ULL 1GB' which has a eMMC instead of the raw NAND used
on other SKUs.

Related-to: ELB-4056, ELB-4057
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2021-10-20 17:54:31 +02:00
Philippe Schenker
3c80a4c781 colibri-imx6ull: imximage.cfg: integrate new 1GiB RAM variant
Integrate new Toradex SKU 0062 Colibri iMX6ULL 1GB IT. This commit
basically adjusts three parameters of the RAM settings:

Increase density from 4Gb to 8Gb
Increase ROW address from 15 to 16
Increase tRFC (refresh command time) from 260 to 350

This timing is valid for all Toradex Colibri iMX6ULL SKUs

Related-to: ELB-4055, ELB-4057
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2021-10-20 17:49:59 +02:00
Teresa Remmet
0caa81fb33 include: configs: phycore-imx8mm: Do not use macro for address
Do not use size macros for addesses. So convert PHYS_SDRAM to address.
No functional change.

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
2021-10-20 15:09:25 +02:00
Teresa Remmet
34a8128ebe include: configs: phycore-imx8mm: Remove not needed defines
Remove obsolet defines in phycore_imx8mm.h.

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
2021-10-20 15:09:25 +02:00
Teresa Remmet
10b317fd86 include: configs: phycore_imx8mm: Remove hard coded network settings
Remove ip address and server ip from board config as they should not
be added hardcoded.

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
2021-10-20 15:09:25 +02:00
Oleksandr Suvorov
41d4b0029d include/configs: apalis-imx8/verdin-imx8mm: rename kernel image variable
Variable "kernel_image" is used in boot.scr script only, that sets its
own default value to the constant string @@KERNEL_IMAGETYPE@@ in case
"kernel_image" is not set.
The default name of the kernel image shipped with BSP 5.x is "Image.gz".
Setting kernel_image="Image" as a pre-defined u-boot variable
breaks booting systems with modern versions of boot.scr, whereas
renaming it fixes booting with modern scripts and does not break working
of earlier versions of boot.scr.

While at it also update the copyright period, rather than hard-coding
fdtfile default fdt_board to dev for the Verdin iMX8M Mini and fix its
closing #endif comment.

Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-10-20 15:08:26 +02:00
Stefano Babic
0105bda050 kontron-sl-mx8mm: fix missing configs and deadlock in CI
Even if board can be successfuly built, CI goes in deadlock (see thread
on https://www.mail-archive.com/u-boot@lists.denx.de/msg419663.html).
This is caused by SYS_CONFIG set in header file and because defconfig
for the board is out of sync with Kconfig. As result, buildman goes on
to read from stdin until an OOM is reached.

Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Frieder Schrempf <frieder.schrempf@kontron.de>
2021-10-20 11:55:25 +02:00
Usama Arif
b20b16a794 arm: total_compute: increase DRAM to 8GB
The extra 6GB start at 0x8080000000.

Signed-off-by: Usama Arif <usama.arif@arm.com>
2021-10-19 11:25:25 -04:00
Marek Vasut
abc6eee0e7 ARM: imx: mx5: Add altbootcmd and resets to M53Menlo
Bulletproof the default boot command with reset statements in case
any command in the chain would fail. In case a failure were to happen,
the board will reset, increment boot counter and retry the procedure.
In case the failures persist and the boot counter reaches the bootlimit,
U-Boot starts altbootcmd instead of the default bootcmd boot command.

The altbootcmd swaps the default boot partition for the other boot
partition, which is an identical copy or an older copy, and tries
booting from that one instead.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2021-10-19 12:36:51 +02:00
Ricardo Salveti
4d98af6996 board: ea: mx7ulp_com: move setting CONFIG_BOOTCOMMAND to defconfig
Move setting CONFIG_BOOTCOMMAND to the mx7ulp_com_defconfig file.
It also allows replacing the default CONFIG_BOOTCOMMAND without
code modification.

Signed-off-by: Ricardo Salveti <ricardo@foundries.io>
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2021-10-19 10:51:39 +02:00
Tom Rini
6a86f12126 Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-tegra
On merge, fixup order of fdtdec_add_reserved_memory parameters in
arch/arm/cpu/armv8/fsl-layerscape/soc.c

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-15 18:30:33 -04:00
Marek Behún
56882dc4cb Convert CONFIG_USB_EHCI_IS_TDI to Kconfig
On mvebu this is defined if and only if !ARM64.

Otherwise it is defined for boards with ARCH_MX23, ARCH_TEGRA and
ARCH_ZYNQ, and also for SOC_AR934X (tplink_wdr4300).

Signed-off-by: Marek Behún <marek.behun@nic.cz>
2021-10-15 09:42:22 -04:00
Marek Behún
645a0afb32 Drop CONFIG_USB_EHCI_KIRKWOOD
This config option doesn't do anything.

nas220 uses USB_EHCI_MARVELL.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
2021-10-15 09:42:22 -04:00
Marek Behún
7b805009fa Convert CONFIG_USB_EHCI_MXS to Kconfig
This option is only used for
  mx23evk_defconfig
  mx23_olinuxino_defconfig
which are the only i.MX23 boards.

Add depend on ARCH_MX23 and default to y.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
2021-10-15 09:42:22 -04:00
Marek Behún
92832045c5 Rename CONFIG_EHCI_IS_TDI to CONFIG_USB_EHCI_IS_TDI
In preparation for moving this option to Kconfig, rename it to be
consistent with other USB EHCI Kconfig options.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
2021-10-15 09:42:22 -04:00
Patrick Delaunay
42d32c3552 Remove unused CONFIG_CONS_NONE
Remove the latest reference of CONFIG_CONS_NONE in code

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-15 07:55:52 -04:00
Patrick Delaunay
0d76e4ec8d Remove unused CONFIG_SYS_FLASH_AMD_CHECK_DQ7
Remove the latest reference of CONFIG_SYS_FLASH_AMD_CHECK_DQ7 in code

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-15 07:55:52 -04:00
Patrick Delaunay
155fb86e2c Remove unused CONFIG_NO_RELOCATION
Remove the latest reference of CONFIG_NO_RELOCATION in code

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-15 07:55:17 -04:00
Patrick Delaunay
e7421b0e41 am33x: Remove unused define CONFIG_MUSB_HOST
This define was left over from a previous revision, and was never used.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-15 07:55:17 -04:00
Patrick Delaunay
ff07cc9ed1 scripts: remove some configs in config_whitelist.txt
Remove some config finishing by _ badly added by
scripts/build-whitelist.sh when joker is used in comments.

for example:
  doc/uImage.FIT/command_syntax_extensions.txt:
     ... #ifdef CONFIG_OF_*  |	...

  cmd/nvedit.c:# error Define one of CONFIG_ENV_IS_IN_{EEPROM| \
     FLASH|MMC|FAT|EXT4|\

Remove also configs only used in comments:
- CONFIG_BOOGER in include/linux/kconfig.h
- CONFIG_COMMANDS
- CONFIG_INIT_IGNORE_ERROR
- CONFIG_REG_*
- CONFIG_HOTPLUG : drivers/watchdog/omap_wdt.c:18

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2021-10-15 07:55:17 -04:00
Thierry Reding
f814ff5e0b ARM: tegra: Support EMC frequency tables on Tegra210
The EMC frequency tables are created from a training sequence performed
during early boot and passed in via a reserved memory region by nvtboot.
Copy this table to the kernel DTB so that the kernel can use it to scale
the EMC frequency at runtime.

Note that early bootloaders store the EMC table at an address that
currently intersects with the load address of the initial ramdisk. In
order to avoid copying the table to a different address, simply change
the load address for the initial ramdisk in U-Boot.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2021-10-13 14:18:30 -07:00
Tom Rini
776bf6a545 - Disable ATAGS for STM32 MCU and MPU boards
- Disable bi_boot_params for STM32 MCU and MPU boards
 - Update stm32-usbphyc node management
 - Convert CONFIG_STM32_FLASH to Kconfig for STM32 MCU boards
 - Convert some USB config flags to Kconfig for various boards
 - Convert CONFIG_BOOTCOMMAND flag to Kconfig for STM32 F429 board
 - Remove specific CONFIG_STV0991 flags
 - Remove unused CONFIG_USER_LOWLEVEL_INIT flag
 - Add ofdata_to_platdata() callback for stm32_spi driver
 - Update for stm32f7_i2c driver
 - Remove gpio_hog_probe_all() from STM32 MP1 board
 - Fix bind command
 -----BEGIN PGP SIGNATURE-----
 
 iQJQBAABCgA6FiEEXyrViUccKBz9c35Jysd4L3sz/6YFAmFlgsIcHHBhdHJpY2Uu
 Y2hvdGFyZEBmb3NzLnN0LmNvbQAKCRDKx3gvezP/plnND/4q9HSlvddybIPjBHlW
 rXz1ISwj8JZPp7R4MJcB4RiHofYZzjTXx3dDYUif6oQMpCDp64KPfcUDW0kaq8U7
 ZFwJvt59boV1XWlonIXMb3gAkY6gFa5PnYAE/YXEqKvPPvUb7FkT7BWxm4LxCGsj
 mEmboR8u87s6e4ZP03HJsSVa5FnNwJUZU8b+58Vxp10YC0PPf7kpmgCucDhrghvY
 TORlk259KUFoZXz4J4My0VzDdxE05gDqq1m6Xw1CzqcUbGysMvjNEHlxGdYbWD/U
 maamP19DUmKUREmpj3kO/JZvacLJlQP/mdGJ0OWKNbIr/3ha4dYagxDoRodEVo0m
 DYaaVPGvG24G78d5meB2q9wT0aGdTyaqm+XRBQMvMN2LlaGmu9duA1t6yBuyMcFk
 BeA7d0eHMo1ezD9FFZMxwIOAWhJlcYQEAMFhUwkR1B322w0NU4nbl9KRCGuGV2Zp
 ZFQV4BoMvb0NwAdo66xwZ+gSq4Wp1y46VM6x2Mw52v2F4p3teeAqR906TdQVYO8+
 hlYChO9+qK4JO7LPX/5wQ4FIzcq1HnTzTpuOSf28hsemiPMu0OkAQv1J7DohNZix
 wELBA+ZIjGXksmDTPjpXg5CSvVALa/l2G816hp7/XTJ1XRBSz/pzjhp5rwm42zmw
 x7EPnwzpAlQCSqTQ0sgO+fgoRA==
 =S4kl
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20211012' of https://source.denx.de/u-boot/custodians/u-boot-stm

- Disable ATAGS for STM32 MCU and MPU boards
- Disable bi_boot_params for STM32 MCU and MPU boards
- Update stm32-usbphyc node management
- Convert CONFIG_STM32_FLASH to Kconfig for STM32 MCU boards
- Convert some USB config flags to Kconfig for various boards
- Convert CONFIG_BOOTCOMMAND flag to Kconfig for STM32 F429 board
- Remove specific CONFIG_STV0991 flags
- Remove unused CONFIG_USER_LOWLEVEL_INIT flag
- Add ofdata_to_platdata() callback for stm32_spi driver
- Update for stm32f7_i2c driver
- Remove gpio_hog_probe_all() from STM32 MP1 board
- Fix bind command

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-12 12:01:00 -04:00
Tom Rini
2aab77f726 Merge https://source.denx.de/u-boot/custodians/u-boot-sunxi
The bulk of it is Samuel's DM_I2C rework, which removes the nasty I2C
deprecation warnings for most 32-bit boards. It also includes some
smaller refactorings that pave the way for more changes, mostly driven
by needing to support the Allwinner RISC-V SoC later on.

Board wise we gain support for the FriendlyARM NanoPi R1S H5 router
board and official Pinetab support.

Build-tested for all 160 sunxi boards, and boot tested on a A64, A20,
H3, H6, and H616 board. USB, SD card, eMMC, and Ethernet all work there
(where applicable).
2021-10-12 11:45:00 -04:00
Samuel Holland
2421497cb7 sunxi: video: Convert panel I2C to use DM_I2C
Two displays supported by the sunxi display driver (each one used by a
single board) require initialization over I2C. Both previously used
i2c_soft; replace this with the i2c-gpio instance that already exists in
those boards' device trees (sun5i-a13-utoo-p66 and sun6i-a31-colombus).

Since the i2c-gpio nodes are not referenced by any other node in the
device trees (the device trees have no panel node), the I2C bus is
selected by its node name.

This panel initialization code was the only i2c_soft user, so the
i2c_soft GPIO setup code can be removed now as well.

Reviewed-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-12 11:01:17 +01:00
Jan Kiszka
ce543d0d4e board: siemens: iot2050: Adjust to changes in DT and configuration
Account for the changes done between merge proposal and the final merge.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2021-10-11 15:02:50 -04:00
Anatolij Gustschin
79c05335a9 video: move MXS to Kconfig
Move CONFIG_VIDEO_MXS from board headers to Kconfig
and drop it from obsolete cfb_console driver.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-10-09 19:50:03 +02:00
Patrick Delaunay
b0e763b7b8 pm9263: Remove unused CONFIG_USER_LOWLEVEL_INIT
Remove the latest reference of CONFIG_USER_LOWLEVEL_INIT in code

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-10-08 08:31:24 +02:00
Patrick Delaunay
c7f85e1f61 stm32f429: move CONFIG_BOOTCOMMAND in defconfig
Move CONFIG_BOOTCOMMAND defined in Kconfig in the board defconfig.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-10-08 08:25:57 +02:00
Patrick Delaunay
454994727d configs: Move some usb config in defconfig
Using the tools moveconfig.py to move the following config in the
defconfig files:
 CONFIG_USB_HOST_ETHER
 CONFIG_USB_ETHER_ASIX
 CONFIG_USB_ETHER_MCS7830
 CONFIG_USB_ETHER_SMSC95XX

These option are already migrated since the commit f58ad98a62 ("usb: net:
migrate USB Ethernet adapters to Kconfig") and the commit ae3584498b
("usb: net: migrate CONFIG_USB_HOST_ETHER to Kconfig").

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-10-08 08:25:12 +02:00
Patrick Delaunay
cc30ea584e Convert CONFIG_STM32_FLASH to Kconfig
This converts the CONFIG_STM32_FLASH to Kconfig by using
tools/moveconfig.py

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-10-08 08:24:20 +02:00
Marek Vasut
2d0808161b Revert "configs: stm32mp1: only support SD card after NOR in bootcmd_stm32mp"
This reverts commit d5d726d3cc,
which breaks boards which ship with multiple SD/eMMC sockets.

This stm32mp1.h config is not used only by the ST reference
boards, but all the other STM32MP1 based boards in U-Boot, so
changes to this stm32mp1.h cannot break the other boards.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-10-08 08:22:43 +02:00
Patrick Delaunay
b703dcb0fe arm: stm32: Disable ATAGs support
These platforms never had to support an ATAGs-based Linux Kernel, so
remove the options.

Cc: Marek Vasut <marex@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Tested-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-10-08 08:15:39 +02:00
Fabio Estevam
84482e4f4e smegw01: Pass 'mmcpart' to the kernel command line
When using SWUpdate, it is necessary to toggle between partitions.

Use the 'mmcpart' environment variable to accomplish that.

Signed-off-by: Fabio Estevam <festevam@denx.de>
2021-10-07 17:45:00 +02:00
Frieder Schrempf
9cab87f184 imx: imx8mm: Add support for Kontron Electronics SL/BL i.MX8M-Mini boards (N801x)
The Kontron SoM-Line i.MX8MM (N801x) by Kontron Electronics GmbH is a SoM
module with an i.MX8M-Mini SoC, 1/2/4 GB LPDDR4 RAM, SPI NOR, eMMC and PMIC.

The matching evaluation boards (Board-Line) have 2 Ethernets, USB 2.0, HDMI/LVDS,
SD card, CAN, RS485 and much more.

Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Tested-by: Heiko Thiery <heiko.thiery@gmail.com>
2021-10-07 17:31:58 +02:00
Tim Harvey
d75ebf3482 imx: ventana: fix splash logo drawing
After mxc_ipuv3 DM_VIDEO conversion showing splash image
doesn't work. Fix this by adding new requirements:
- splashimage env variable.
- CONFIG_SPLASH_SCREEN
- CONFIG_CMD_BMP

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-10-07 16:53:50 +02:00
Frieder Schrempf
e6f48aad15 imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx)
This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by
Kontron Electronics GmbH.

Currently there are the following SoM flavors (SoM-Line):
  * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND
  * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND
  * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND

And the according evaluation boards (Board-Line):
  * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ...
  * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ...
  * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ...

Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config
options at compile-time. Though the differences are so minor, that for
the scope of these SoMs we just use a single defconfig that is compatible
with both SoCs.

Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2021-10-07 16:53:50 +02:00
Matthias Schiffer
bc959905df imx: mx7: spl: fix CONFIG_SPL_MAX_SIZE definition
The CONFIG_SPL_MAX_SIZE definition did not account for all areas that
are used by the boot ROM according to the manual, causing boot failures
due to truncated SPL images when actually hitting this limit.

Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
2021-10-07 16:53:50 +02:00
Oleksandr Suvorov
32139c25e4 imx8qm_mek: Increase CONFIG_SYS_BOOTM_LEN to 64MB
The BSP platform LmP supports the board NXP iMX8QM MEK. The
kernel size in LmP exceeds 32Mb. Increase the maximum size
of an uncompressed kernel to fix the following error:
    Uncompressing Kernel Image
    Error: inflate() returned -5
    Image too large: increase CONFIG_SYS_BOOTM_LEN
    Must RESET board to recover

Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
2021-10-07 16:53:50 +02:00
Oleksandr Suvorov
13586e4668 imx8mq_evk: Increase CONFIG_SYS_BOOTM_LEN to 64MB
The BSP platform LmP supports the board NXP iMX8M Plus EVK. The
kernel size in LmP exceeds 32Mb. Increase the maximum size
of an uncompressed kernel to fix the following error:
    Uncompressing Kernel Image
    Error: inflate() returned -5
    Image too large: increase CONFIG_SYS_BOOTM_LEN
    Must RESET board to recover

Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
2021-10-07 16:53:50 +02:00
Oleksandr Suvorov
80c9cb3cb5 imx8mm_evk: Increase CONFIG_SYS_BOOTM_LEN to 64MB
The BSP platform LmP supports the board NXP iMX8M Mini EVK. The
kernel size in LmP exceeds 32Mb. Increase the maximum size
of an uncompressed kernel to fix the following error:
    Uncompressing Kernel Image
    Error: inflate() returned -5
    Image too large: increase CONFIG_SYS_BOOTM_LEN
    Must RESET board to recover

Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
2021-10-07 16:53:50 +02:00
Vyacheslav Bocharov
15eda54676 ARM: amlogic: add JetHub common config header
JetHub devices uses its own boot sequence with "rescue" button

Signed-off-by: Vyacheslav Bocharov <adeep@lexina.in>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-10-07 13:45:35 +02:00
Neil Armstrong
f485e9dfa7 configs: meson64: add SCSI boot target
Add SCSI target to be able to boot from the SATA disks on the Odroid HC4 using
an on-board AHCI PCIe controller.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
2021-10-07 10:14:50 +02:00
Tom Rini
6115f1c4fe Convert CONFIG_NAND_OMAP_ECCSCHEME to Kconfig
The values of CONFIG_NAND_OMAP_ECCSCHEME map to the enum in
include/linux/mtd/omap_gpmc.h for valid ECC schemes.  Make which one we
will use be a choice statement, enumerating the ones which we have
implemented.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-06 09:16:24 -04:00
Tom Rini
871fd508fc Convert CONFIG_SYS_NAND_U_BOOT_LOCATIONS et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_NAND_U_BOOT_LOCATIONS
   CONFIG_SYS_NAND_U_BOOT_OFFS

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-06 09:16:24 -04:00
Tom Rini
53f06134ed Convert CONFIG_NAND_FSL_ELBC et al to Kconfig
This converts the following to Kconfig:
   CONFIG_NAND_FSL_ELBC
   CONFIG_NAND_FSL_IFC

Note that a number of PowerPC platforms had previously enabled
CONFIG_NAND_FSL_ELBC without CONFIG_MTD_RAW_NAND, and now they no longer
enable the option, reducing the size of a few functions.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-06 09:16:24 -04:00
Tom Rini
b2e25afabd Convert CONFIG_SYS_NAND_MAX_CHIPS to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_NAND_MAX_CHIPS

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-06 09:16:24 -04:00
Tom Rini
c0ad62c5f7 Convert CONFIG_SYS_NAND_ONFI_DETECTION to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_NAND_ONFI_DETECTION

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-06 09:16:23 -04:00
Tom Rini
4884d829d7 Convert CONFIG_SYS_NAND_5_ADDR_CYCLE to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_NAND_5_ADDR_CYCLE

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-06 09:16:23 -04:00
Tom Rini
9d9f59dd0a Convert CONFIG_SYS_NAND_BAD_BLOCK_POS to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_NAND_BAD_BLOCK_POS

In order to do this, introduce a choice for HAS_LARGE/SMALL_BADBLOCK_POS
as those are the only valid values.  Use LARGE as the default as no
in-tree boards use SMALL, but it is possible.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-06 09:16:23 -04:00