Convert CONFIG_MISC_INIT_F et al to Kconfig

This converts the following to Kconfig:
   CONFIG_MISC_INIT_F
   CONFIG_MISC_INIT_R

Signed-off-by: Tom Rini <trini@konsulko.com>
This commit is contained in:
Tom Rini 2021-11-07 22:59:41 -05:00
parent 53b3df4e0c
commit 406257ae41
9 changed files with 5 additions and 10 deletions

View file

@ -17,6 +17,7 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_LAST_STAGE_INIT=y
CONFIG_MISC_INIT_F=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_DM=y
CONFIG_CMD_I2C=y

View file

@ -27,6 +27,7 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
# CONFIG_USE_BOOTCOMMAND is not set
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_MISC_INIT_R=y
CONFIG_CMD_GREPENV=y
CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
CONFIG_CMD_MEMINFO=y

View file

@ -30,6 +30,7 @@ CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwait"
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_MISC_INIT_R=y
CONFIG_SPL_DISPLAY_PRINT=y
# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
CONFIG_SPL_RAM_SUPPORT=y

View file

@ -25,6 +25,7 @@ CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 earlycon earlyprintk=serial,ttyS0, ignore_loglevel root=/dev/mmcblk0p2 memtest=0 rootfstype=ext4 rw rootwait"
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_MISC_INIT_R=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_CONFIG=y
CONFIG_CMD_BOOTZ=y

View file

@ -26,6 +26,7 @@ CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_MISC_INIT_R=y
CONFIG_SPL_LEGACY_IMAGE_CRC_CHECK=y
# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION is not set

View file

@ -335,7 +335,6 @@
#define CONFIG_SYS_CS2_FTIM2 SYS_QRIO_FTIM2
#define CONFIG_SYS_CS2_FTIM3 SYS_QRIO_FTIM3
#define CONFIG_MISC_INIT_F
#define CONFIG_HWCONFIG
/* define to use L1 as initial stack */

View file

@ -13,10 +13,6 @@
unsigned long get_board_sys_clk(void);
#endif
#ifdef CONFIG_TFABOOT
#define CONFIG_MISC_INIT_R
#endif
#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
#define CONFIG_QIXIS_I2C_ACCESS
#define SYS_NO_FLASH

View file

@ -14,8 +14,6 @@
#undef CONFIG_SYS_AT91_MAIN_CLOCK
#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
#define CONFIG_MISC_INIT_R
/* SDRAM */
#define CONFIG_SYS_SDRAM_BASE 0x20000000
#define CONFIG_SYS_SDRAM_SIZE 0x20000000

View file

@ -9,9 +9,6 @@
#include <asm/arch/base_addr_ac5.h>
#include <linux/stringify.h>
/* Call misc_init_r */
#define CONFIG_MISC_INIT_R
#define CONFIG_HUSH_INIT_VAR
/* Eternal oscillator */
#define CONFIG_SYS_TIMER_RATE 40000000