Commit graph

14679 commits

Author SHA1 Message Date
Heiko Thiery
891a32465d kontron-sl-mx8mm: change environment address variables
Currently the space between kernel_addr_r and the fdt_addr_r is only 32MB.
To have enought space to load kernel images bigger than 32MB change the
variables to a feasible value.

The new environment variables layout is based on the scheme from
"include/configs/ti_armv7_common.h".

The CONFIG_SYS_LOAD_ADDR value is set to 0x42000000. With that we have
the same value as for the kernel_addr_r.

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Reviewed-by: Michael Walle <michael@walle.cc>
2022-02-19 23:32:23 +01:00
Francesco Dolcini
a1128944a1 colibri-imx6ull: improve env badblock management
Use the complete 512kb (4 blocks) nand partition reserved for u-boot
environment instead of just the first block, this allows the module to
have a working environment even if 3 blocks are bad.

Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-02-19 23:32:22 +01:00
Tim Harvey
10673ebb1f board: gateworks: venice: config file cleanups
Clean up config file:
 - remove unnecessary IMX_FEC_BASE
 - remove unnecessary comment
 - remove ipaddr/serverip from env

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-19 14:46:54 +01:00
Tim Harvey
2cb156e126 board: gateworks: venice: add imx8mn-gw7902 support
The GW7902 is based on the i.MX 8M Mini / Nano SoC featuring:
 - LPDDR4 DRAM
 - eMMC FLASH
 - Gateworks System Controller
 - LTE CAT M1 modem
 - USB 2.0 HUB
 - M.2 Socket with USB2.0, PCIe, and dual-SIM
 - IMX8M FEC
 - PCIe based GbE
 - RS232/RS485/RS422 serial transceiver
 - GPS
 - CAN bus
 - WiFi / Bluetooth
 - MIPI header (DSI/CSI/GPIO/PWM/I2S)
 - PMIC

To add support for the i.MX8M Nano GW7902:
 - Add imx8mn-venice dts/defconfig/include
 - Add imx8mn-gw7902 dts
 - Add imx8mn-2gb lpddr4 dram configs
 - Add misc support for IMX8M Nano SoC
 - rename imx8mm-venice.c to venice.c as it is no longer imx8mm specific
 - update README with differences for IMX8MN vs IMX8MM

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-19 14:46:54 +01:00
Ying-Chun Liu (PaulLiu)
ddb56f371a arm: imx8m: add support for Advantech RSB-3720
Add initial support for Advantech RSB-3720 board.
The initial support includes:
 - MMC
 - eMMC
 - I2C
 - FEC
 - Serial console

Signed-off-by: Darren Huang <darren.huang@advantech.com.tw>
Signed-off-by: Kevin12.Chen <Kevin12.Chen@advantech.com.tw>
Signed-off-by: Phill.Liu <Phill.Liu@advantech.com.tw>
Signed-off-by: Tim Liang <tim.liang@advantech.com.tw>
Signed-off-by: wei.zeng <wei.zeng@advantech.com.cn>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
Cc: uboot-imx <uboot-imx@nxp.com>
Cc: Peng Fan (OSS) <peng.fan@oss.nxp.com>
2022-02-19 14:46:54 +01:00
Sinthu Raja
0ca9f70423 include: configs: Update env for selecting right dtb
Now that single defconfig can be used for booting J721E EVM and
SK, default device tree will not work for selecting dtb for
kernel. Update the findfdt env to select right dtb based on
board_name env variable.

Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-16 14:19:30 -05:00
Ovidiu Panait
1669b3d1a0 microblaze: exception: migrate MICROBLAZE_V5 to Kconfig
Also, rename it to XILINX_MICROBLAZE0_DELAY_SLOT_EXCEP, since it only
covers delay slot exception support.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Link: https://lore.kernel.org/r/20220213080925.1548411-2-ovidiu.panait@windriver.com
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2022-02-15 13:11:43 +01:00
Ovidiu Panait
1ca890d789 common: drop CONFIG_SYS_RESET_ADDR
There are no boards that define CONFIG_SYS_RESET_ADDR, so drop the
remaining comments referencing it and also the config_whitelist.txt entry.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Acked-by: thomas@wytron.com.tw
2022-02-10 16:44:23 -05:00
Mark Kettenis
d42f107425 input: apple: Add support for Apple SPI keyboard
This driver adds support for the keyboard on Apple Silicon laptops.
The controller for this keyboard sits on an SPI bus and uses an
Apple-specific HID over SPI protocol. The packets sent by this
controller for key presses and key releases are fairly simple and
are decoded directly by the code in this driver and converted into
standard Linux keycodes. The same controller handles the touchpad
found on these laptops.  Packets for touchpad events are simply
ignored.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested on: Macbook Air M1
Tested-by: Simon Glass <sjg@chromium.org>
2022-02-10 16:44:23 -05:00
Mark Kettenis
dbb273a5b6 configs: apple: Add NVMe boot target
Add a boot target for NVMe such that we can boot from NVMe.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
2022-02-10 16:44:23 -05:00
Tony Dinh
d2a44ceddc arm: kirkwood: Pogoplug E02 : Convert Ethernet to Driver Model
The Pogoplug E02 board has the network chip Marvell 88E1116R. Convert
to Driver Model and use uclass mvgbe and the compatible driver M88E1118R
to bring up Ethernet.

- Add board_eth_init(), CONFIG_DM_ETH, and CONFIG_PHY_MARVELL
to bring up Ethernet.
- Currently, CONFIG_RESET_PHY_R symbol is used in
arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood
boards with mv8831116 PHY, with each board defines the function
reset_phy(). Undefine it for this board.
- As the result of the migration to Driver Model, this u-boot image has
grown substantially (about 100K, give or take). The old envs location
at 0x60000 (384k) is no longer possible. Move it to 0xC0000 (768K).
- Miscellaneous changes: Move constants to .c file and remove header file
board/cloudengines/pogo_e02/pogo_e02.h, use CONFIG_SYS_THUMB_BUILD to
keep u-boot image under 512K, use BIT macro, and cleanup comments.

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-02-10 07:12:16 +01:00
Tony Dinh
c153576d8d arm: kirkwood: Dockstar : Add DM Ethernet
The Dockstar board has the network chip Marvell 88E1116R. Convert to
Ethernet driver model, and use uclass mvgbe and the compatible driver
M88E1118R to bring up Ethernet.

- Add CONFIG_DM_ETH and associated configs.
- Add board_eth_init() to use uclass mvgbe to bring up the network.
And remove ad-hoc code.
- Add CONFIG_PHY_MARVELL to properly configure the network.
- Currently, CONFIG_RESET_PHY_R symbol is used in
arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood
boards with mv8831116 PHY, with each board defines the function
reset_phy(). Undefine it for this board.
- Miscellaneous changes: Move constants to .c file and remove
header file board/Seagate/dockstar/dockstar.h, use
CONFIG_SYS_THUMB_BUILD to keep u-boot image
under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments.

- Note: This patch is a RESEND for a previous patch:
https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-02-10 07:12:16 +01:00
Tony Dinh
f99a169c19 arm: kirkwood: iConnect : Add Ethernet support
- Currently, CONFIG_RESET_PHY_R symbol is used in
arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood
boards with mv8831116 PHY, with each board defines the function
reset_phy(). Undefine it for this board.
- Add board_eth_init(), CONFIG_DM_ETH, and CONFIG_PHY_MARVELL
to bring up Ethernet.
- Miscellaneous changes: Move constants to .c file and remove header file
board/iomega/iconnect/iconnect.h. Add CONFIG_HUSH_PARSER, use BIT macro,
and cleanup comments.

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-02-10 07:12:16 +01:00
Tony Dinh
fb9ed23c22 arm: kirkwood: Dreamplug : Use Marvell uclass mvgbe and PHY driver for Ethernet
The Globalscale Technologies Dreamplug board has the network chip
Marvell 88E1116R. Use uclass mvgbe and the compatible driver M88E1310
driver to bring up Ethernet.

- Currently, CONFIG_RESET_PHY_R symbol is used in
arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood
boards with mv8831116 PHY, with each board defines the function
reset_phy(). Undefine it for this board.
- Add board_eth_init() to use uclass mvgbe to bring up both network
port 0 and 1. And remove ad-hoc code.
- Enable CONFIG_PHY_MARVELL to properly configure the network.
- Add myself as maintainer (this board seems to be orphaned,
could not contact Jason Cooper using current email).
- Miscellaneous changes: Move constants to .c file and remove header file
board/Marvell/dreamplug/dreamplug.h, cleanup comments.

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Pali Rohár <pali@kernel.org>
2022-02-10 07:12:16 +01:00
Simon Glass
edca8cf721 Convert CONFIG_SCSI_AHCI_PLAT et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SCSI_AHCI_PLAT
   CONFIG_SYS_SCSI_MAX_SCSI_ID
   CONFIG_SYS_SCSI_MAX_LUN
   CONFIG_SYS_SATA_MAX_DEVICE

Drop CONFIG_SCSI for everything except the sandbox build. We only need
one build for tests.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-02-09 09:16:48 -05:00
Simon Glass
ce30e3ff1e scsi: Drop CONFIG_SYS_SCSI_MAX_DEVICE
This is defined based on two other CONFIGs for all boards except sandbox
and durian.

For sandbox the value does not matter. For durian the value seems
excessive.

Drop the option completely, to simplify configuration and reduce the
number of things we need to convert to Kconfig.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-02-09 09:16:48 -05:00
Alper Nebi Yasak
a8c281d4b7 Convert CONFIG_REMAKE_ELF to Kconfig
This converts the following to Kconfig:
   CONFIG_REMAKE_ELF

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-02-09 09:16:47 -05:00
Simon Glass
4b4b1de85d Drop CONFIG_SYS_PIO_MODE
This option is not used in U-Boot. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-02-09 09:16:47 -05:00
Simon Glass
d2da54bfc4 Convert CONFIG_SYS_IDE_MAXBUS et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_IDE_MAXBUS
   CONFIG_SYS_IDE_MAXDEVICE
   CONFIG_SYS_ATA_BASE_ADDR
   CONFIG_SYS_ATA_STRIDE
   CONFIG_SYS_ATA_DATA_OFFSET
   CONFIG_SYS_ATA_REG_OFFSET
   CONFIG_SYS_ATA_ALT_OFFSET
   CONFIG_SYS_ATA_IDE0_OFFSET
   CONFIG_SYS_ATA_IDE1_OFFSET
   CONFIG_ATAPI
   CONFIG_IDE_RESET

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-02-09 09:16:47 -05:00
Pali Rohár
f55d4978e1 Nokia RX-51: Convert to CONFIG_DM_KEYBOARD
Signed-off-by: Pali Rohár <pali@kernel.org>
2022-02-08 11:00:04 -05:00
Aswath Govindraju
5980925e2a include: configs: j721e_evm: Add support to boot ethfw core in j721e
Add configs to enable booting ethfw core in j721e

Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
2022-02-08 11:00:04 -05:00
David Huang
681023aba4 arm: K3: Add basic support for J721S2 SoC definition
Add basic support for J721S2 SoC definition

Signed-off-by: David Huang <d-huang@ti.com>
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
2022-02-08 09:41:26 -05:00
Oleksandr Suvorov
530780a69c apalis/colibri_imx6: move setting bootcmd to defconfig
Move setting the default boot command to the
apalis/colibri_imx6_defconfig. It allows replacing the command
without code modification.

Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@foundries.io>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-02-07 16:33:23 +01:00
Marcel Ziswiler
2bc2f817ce board: toradex: add verdin imx8m plus support
This adds initial support for the Toradex Verdin iMX8M Plus Quad 4GB WB
IT V1.0B module. They are strapped to boot from eFuses which are factory
fused to properly boot from their on-module eMMC. U-Boot supports
booting from the on-module eMMC only, SDP support is disabled for now
due to missing i.MX 8M Plus USB support.

Functionality wise the following is known to be working:
- eMMC, 8-bit and 4-bit MMC/SD card slots
- Ethernet both on-module eQoS and FEC (requires PHY on carrier board)
- GPIOs
- I2C

Boot sequence is:
SPL ---> ATF (TF-A) ---> U-boot proper

ATF, U-boot proper and u-boot.dtb images are packed into a FIT image,
loaded by SPL.

Boot:
U-Boot SPL 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100)
Quad die, dual rank failed, attempting dual die, single rank configuration.
Normal Boot
WDT:   Started watchdog@30280000 with servicing (60s timeout)
Trying to boot from BOOTROM
Find img info 0x&48025a00, size 872
Need continue download 1024
Download 779264, Total size 780424
NOTICE:  BL31: v2.2(release):rel_imx_5.4.70_2.3.2_rc1-5-g835a8f67b
NOTICE:  BL31: Built : 16:52:37, Aug 26 2021

U-Boot 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100)

CPU:   Freescale i.MX8MP[8] rev1.1 at 1200 MHz
Reset cause: POR
DRAM:  8 GiB
Core:  78 devices, 18 uclasses, devicetree: separate
WDT:   Started watchdog@30280000 with servicing (60s timeout)
MMC:   FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... OK
In:    serial
Out:   serial
Err:   serial
Model: Toradex Verdin iMX8M Plus Quad 4GB Wi-Fi / BT IT V1.0B, Serial# 06817281
Carrier: Toradex Verdin Development Board V1.1A, Serial# 10807609
Setting variant to wifi
Net:   Hard-coding pdata->enetaddr
eth1: ethernet@30be0000, eth0: ethernet@30bf0000 [PRIME]
Hit any key to stop autoboot:  0
Verdin iMX8MP #

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-07 16:33:22 +01:00
Marek Vasut
2b8e304b93 ARM: imx6: dh-imx6: Add update_sf script to install U-Boot into SF
Add script to read U-Boot from SD card and write it to matching
locations in the SPI NOR, thus making the SPI NOR bootable.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Stefano Babic <sbabic@denx.de>
Acked-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-05 15:49:02 +01:00
Heiko Thiery
16c7369ede board: kontron: pitx-imx8m: Add Kontron pitx-imx8m board support
The Kontron pitx-imx8m is an NXP i.MX8MQ based board in the pITX form factor.

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
2022-02-05 15:49:02 +01:00
Oliver Graute
8f55003c58 imx: imx8qm_rm7720: adjust fdt_addr
The Linux Kernel Image size for arm64 is still growing.
A Kernel with 54 MB at load address 0x80280000 overlaps
with fdt_addr at 0x83000000. So let's increase it to 0x84000000

Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
2022-02-05 15:49:01 +01:00
Oliver Graute
a7e22ec90e imx: imx8qm_rom7720: Increase CONFIG_SYS_BOOTM_LEN to 64MB
Increase CONFIG_SYS_BOOTM_LEN to 64MB

Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
2022-02-05 15:49:01 +01:00
Andrey Zhizhikin
8c34cdc735 imx: ventana: correct splashimage load address
Commit 72d81360aa ("global: Convert CONFIG_LOADADDR to
CONFIG_SYS_LOADADDR") dropped the usage of LOADADDR and replaced it with
SYS_LOADADDR.

Use the correct macro in environment by replacing CONFIG_LOADADDR with
CONFIG_SYS_LOADADDR.

Fixes: d75ebf3482 ("imx: ventana: fix splash logo drawing")
Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
Cc: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Acked-By: Tim Harvey <tharvey@gateworks.com>
2022-02-05 15:49:01 +01:00
Andrey Zhizhikin
efaf9a2b32 imx8mq_evk: configs: add/cleanup variables for distro boot
Add fdt_addr_r fdtfile which used by distro boot, and cleanup legacy
environment variables.

Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
2022-02-05 15:49:01 +01:00
Ying-Chun Liu (PaulLiu)
f8a5cda5ec configs: imx8mm-cl-iot-gate: update dfu_alt_info for single flash.bin
We changed to single flash.bin now. So dfu_alt_info should be modified
to reflect this change.

Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-05 15:49:00 +01:00
Christoph Niedermaier
ca27227c59 ARM: dts: imx6q-dhcom: Use 1G ethernet on the PDK2 board
The PDK2 board is capable of running both 100M and 1G ethernet. However,
the i.MX6 has only one ethernet MAC, so it is possible to configure
either 100M or 1G Ethernet. In case of 100M option, the PHY is on the
SoM and the signals are routed to a RJ45 port. For 1G the PHY is on
the PDK2 board with another RJ45 port. 100M and 1G ethernet use
different signal pins from the i.MX6, but share the MDIO bus.

This SoM board combination is used to demonstrate how to enable 1G
ethernet configuration.

Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Stefano Babic <sbabic@denx.de>
2022-02-05 13:38:39 +01:00
Ariel D'Alessandro
c4c1ed68c1 imx8mn_var_som: Add support for Variscite VAR-SOM-MX8M-NANO board
Add support for iMX8MN VAR-SOM-MX8M-NANO board. Enables support for:

- 1GiB DDR4 RAM
- 16 GiB eMMC
- SD card
- Gigabit ethernet
- USBOTG1 peripheral - fastboot

Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-05 13:38:39 +01:00
Ricardo Salveti
8b71576f38 mx7ulp_com: add support for SPL
Add EA iMX7ULP COM board support for building SPL.

Signed-off-by: Ricardo Salveti <ricardo@foundries.io>
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
2022-02-05 13:38:38 +01:00
Francesco Dolcini
0c141103b4 colibri-imx7: improve env badblock management
Use the complete 512kb (4 blocks) nand partition reserved for u-boot
environment instead of just the first block, this allows the module
to have a working environment even if 3 blocks are bad.

Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
2022-02-05 13:38:38 +01:00
Icenowy Zheng
2c699fe0d3 configs: sunxi: Add common SUNIV header
Adds support for SUNIV and the F1C100s.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-02-04 00:09:57 +00:00
Andre Przywara
f2c33699d1 sunxi-common.h: remove pointless #ifdefs
Remove some pointless #ifdefs from this file, as there are quite too
many of them already.

Some definitions don't really hurt to have in any case, so remove the
pointless CONFIG_MMC guard around CONFIG_MMC_SUNXI_SLOT.

The BOARD_SIZE_LIMIT applies regardless of ARM64 or not (now), so remove
that guard as well. The maximum number of MMC devices does not depend on
CONFIG_ENV_IS_IN_MMC, so move that out to simplify the file.

Last but not least CONFIG_SPL_BOARD_LOAD_IMAGE serves no real purpose
anymore: it's unconditionally defined for all sunxi boards, and protects
nothing applicable outside of sunxi code anymore. Just remove it.

Reviewed-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-02-04 00:09:57 +00:00
Aleksandar Gerasimovski
84f1052800 km/ls102xa: add support for field fail-safe u-boot update
Field fail-safe u-boot update procedure for pg-wcom boards is defined and
implemented by patch: 59b3403.
This patch invokes the update procedure for pg-wcom-ls102x designs during
early misc_init_f execution.

Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachienergy.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01 15:08:07 +05:30
Mathew McBride
a1d2fd3874 board: traverse: add initial Ten64 support
The Ten64 is a networking-oriented MiniITX board
using the NXP LS1088A SoC.

This patch provides the bare minimum to support
Ten64 boards under U-Boot for distroboot.

Some related drivers have not yet been submitted
and this basic support lacks some of the
opinionated defaults provided by our firmware
distribution.

Signed-off-by: Mathew McBride <matt@traverse.com.au>
[Rebased]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01 15:04:24 +05:30
Tony Dinh
648f8d5f6b arm: kirkwood: GoFlex Home : Use Marvell uclass mvgbe and PHY driver for Ethernet
The GoFlex Home board has the network chip Marvell 88E1116R.
Use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet.

- Currently, CONFIG_RESET_PHY_R symbol is used in
arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood
boards with mv8831116 PHY, with each board defines the function
reset_phy(). Undefine it for this board.
- Add board_eth_init() to use uclass mvgbe to bring up the network.
And remove ad-hoc code.
- Enable CONFIG_PHY_MARVELL to properly configure the network.
- Miscellaneous changes: use CONFIG_SYS_THUMB_BUILD to keep u-boot image
under 512K, use BIT macro, and cleanup comments.

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-31 10:23:38 +01:00
Tony Dinh
7301ed9d68 arm: kirkwood: Pogoplug-V4 : Add board implementation files
Add board header, defconfig, and implementation files for Pogoplug V4.

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Pali Rohár <pali@kernel.org>
2022-01-31 10:23:37 +01:00
Vignesh Raghavendra
f621ff8504 configs: am64xx_evm: Increase BSS max size to 16K
With Ethboot support in SPL, network stack requires more BSS area, so
increase BSS max size to 16K

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2022-01-28 17:58:41 -05:00
Patrick Delaunay
d5e8119bae stm32mp: remove the bootcount activation
Today the bootcount is not managed by the Linux kernel for STM32MP15 as
we don't have driver to update the used backup register in TAMP and the
recovery command still executes the normal bootcmd with
'altbootcmd=run bootcmd'.

So the bootcount feature is never used, the config CONFIG_BOOTCOUNT_LIMIT
and the associated environment variable 'altbootcmd' can be removed to
reduce the U-Boot size.

Each boards can re-enable this feature later in their defconfig, if it is
needed, with the expected backend, for example CONFIG_BOOTCOUNT_GENERIC
or CONFIG_BOOTCOUNT_ENV.

CC: Marek Vasut <marex@denx.de>
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-01-24 10:56:45 +01:00
Marek Vasut
3919aa1722 ARM: dts: stm32: Add DFU support for DHCOR recovery
This patch configures U-Boot SPL for DHCOR SoM to permit DFU upload of
SPL and subsequent u-boot.itb for recovery or commissioning purposes.

To start U-Boot on DHCOR based board, e.g. Avenger96, proceed as follows:
- Install dfu-util on the host PC (in debian this is package 'dfu-util')

- Power off the Avenger96 board.
- Connect both USB-serial console and USB-OTG microB ports to host PC.
- Switch Avenger96 to USB boot mode -- BOOT0..2 switches all set to 0.
- Power on the Avenger96 board.
- Verify using '$ dmesg' that a new device has been detected as follows:
    New USB device found, idVendor=0483, idProduct=df11, bcdDevice= 2.00
    New USB device strings: Mfr=1, Product=2, SerialNumber=3
    Product: DFU in HS Mode @Device ID /0x500, @Revision ID /0x0000
    Manufacturer: STMicroelectronics

- Upload U-Boot SPL:
$ dfu-util -a 1 -D u-boot-spl.stm32
- Upload U-Boot proper:
$ dfu-util -a 0 -D u-boot.itb

- At this point, SPL will wait for user to press "Ctrl-C" on serial
  console. When ready to interact with U-Boot, press Ctrl-C to start
  the bootloader.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-01-24 10:55:06 +01:00
Patrick Delaunay
3425decf52 Convert CONFIG_AT91_EFLASH to Kconfig
This converts the following to Kconfig:
   CONFIG_AT91_EFLASH

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Acked-by: Eugen Hristev <eugen.hristev@microchip.com>
2022-01-21 14:01:35 -05:00
Patrick Delaunay
0f9595b9fa configs: Migrate CONFIG_SYS_MAX_FLASH_BANKS to Kconfig
Use moveconfig.py script to convert define CONFIG_SYS_MAX_FLASH_BANKS
and CONFIG_SYS_MAX_FLASH_BANKS_DETECT to Kconfig and move these entries
to defconfigs.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
[trini: Re-switch to IS_ENABLED check in spi-nor-core.c, re-run migration]
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-01-21 14:01:35 -05:00
Patrick Delaunay
144fef87df mtd: cfi: change CONFIG_SYS_MAX_FLASH_BANKS_DETECT as boolean
Prepare migration to Kconfig.

CONFIG_SYS_MAX_FLASH_BANKS_DETECT becomes boolean and
CONFIG_SYS_MAX_FLASH_BANKS define the MAX size, also used
for detection when CONFIG_SYS_MAX_FLASH_BANKS_DETECT=y
(CFI_MAX_FLASH_BANKS = CONFIG_SYS_MAX_FLASH_BANKS).

CONFIG_SYS_MAX_FLASH_BANKS become mandatory when
CONFIG_SYS_MAX_FLASH_BANKS_DETECT is activated.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-21 14:01:35 -05:00
Alexandru Gagniuc
22eb1526d4 spl: Convert SYS_MMCSD_RAW_MODE_KERNEL_SECTOR to Kconfig
Falcon mode is very useful in improving boot speed. A question that
Falcon mode asks is "Where do I look for the kernel". With MMC boot
media, the correct answer is CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR.
The scope of this patch is to move this to Kconfig.

It is possible for a system to support Falcon mode from NOR but not
MMC. In that case, mmc_load_image_raw_os() would not be used. To
address this, conditionally compile mmc_load_image_raw_os() when
SPL_FALCON_BOOT_MMCSD, instead of SPL_OS_BOOT.

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
[trini: Move spl_start_uboot to its own guard in spl_mmc.c, rerun migration]
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-01-21 14:01:35 -05:00
Simon Glass
d3877fba31 Convert CONFIG_BOOTP_SERVERIP to Kconfig
This converts the following to Kconfig:
   CONFIG_BOOTP_SERVERIP

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-21 14:01:35 -05:00
Simon Glass
d6b318de2f Convert CONFIG_TIMESTAMP to Kconfig
This converts the following to Kconfig:
   CONFIG_TIMESTAMP

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-21 14:01:34 -05:00
Simon Glass
4b37fd146b Convert CONFIG_UDP_CHECKSUM to Kconfig
This converts the following to Kconfig:
   CONFIG_UDP_CHECKSUM

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-21 14:01:34 -05:00
Simon Glass
3df6cd4d63 Convert CONFIG_KEEP_SERVERADDR to Kconfig
This converts the following to Kconfig:
   CONFIG_KEEP_SERVERADDR

Drop the preprocessor usage also.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-21 14:01:34 -05:00
Mattijs Korpershoek
b749d5ecdc configs: meson64_android: define raw parts for bootloader
Per the android documentation[1]:
- the mmc2boot0 partition should be labeled "bootloader".
- the mmc2boot1 partition should be labeled "bootenv".

Also the u-boot documentation[2] refers to a BOOT1_OFFSET of 1 block.

Define 2 raw partitions to store the bootloaders and the bootenv.

[1] https://source.android.com/setup/build/devices#vim3-fastboot
[2] https://u-boot.readthedocs.io/en/latest/board/amlogic/khadas-vim3l.html

Suggested-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20220107163913.3393563-1-mkorpershoek@baylibre.com
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2022-01-20 09:50:54 +01:00
Tom Rini
068415eade Xilinx changes for v2022.04-rc1
gpio:
 - Add modepin driver
 
 net:
 - Save random mac addresses to eth variable
 
 zynqmp gem:
 - Add support for mdio bus DT description
 - Add support for reset and SGMII phy configuration
 - Reduce timeout for MDIO accesses
 
 zynqmp clk:
 - Fix clock handling for gem and usb
 
 phy:
 - Add zynqmp phy/serdes driver
 
 serial:
 - Add one missing compatible string
 
 microblaze:
 - Symbol alignement
 - SPL fixups
 - Code cleanups
 
 zynqmp:
 - Various dt changes, DP pre-reloc, gem resets, gem clocks
 - Switch SOM to shared psu configuration
 - Move dcache handling to firmware driver
 - Workaround gmii2rgmii DT description issue
 - Enable broadcasts again
 - Change firmware enablement logic
 - Small adjustement in firmware driver
 
 versal:
 - Support new mmc@ DT nodes
 - Fix run time variable handling
 - Add missing I2C_PMC ID for power domain
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCYeg7sQAKCRDKSWXLKUoM
 IVhJAKCAiNx/joEeFBJ0XgThtJzFhCjdMwCfYKY9Ewz4L0n2I56lDgR3UJroct0=
 =HtB+
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2022.04-rc1' of https://source.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx changes for v2022.04-rc1

gpio:
- Add modepin driver

net:
- Save random mac addresses to eth variable

zynqmp gem:
- Add support for mdio bus DT description
- Add support for reset and SGMII phy configuration
- Reduce timeout for MDIO accesses

zynqmp clk:
- Fix clock handling for gem and usb

phy:
- Add zynqmp phy/serdes driver

serial:
- Add one missing compatible string

microblaze:
- Symbol alignement
- SPL fixups
- Code cleanups

zynqmp:
- Various dt changes, DP pre-reloc, gem resets, gem clocks
- Switch SOM to shared psu configuration
- Move dcache handling to firmware driver
- Workaround gmii2rgmii DT description issue
- Enable broadcasts again
- Change firmware enablement logic
- Small adjustement in firmware driver

versal:
- Support new mmc@ DT nodes
- Fix run time variable handling
- Add missing I2C_PMC ID for power domain
2022-01-19 11:43:44 -05:00
Amjad Ouled-Ameur
609983e981 board: ti: am335x: Choose CPSW or PRUSS configuration based on jumper setting
The am335x-ice-v2 board's Ethernet ports can be configured
in 'MII' or 'RMII' mode to be connected to 'PRUSS' or 'CPSW'
Ethernet subsystems.

This patch sets the environment variable 'ice_mii' to
'mii' or 'rmii' accordingly. Based on that we choose the
appropriate board devicetree i.e. 'am335x-ice-v2.dtb' or
'am335x-ice-v2-prueth.dtb'.

Since there are 2 Ethernet ports with 2 modes, there can be 4
configurations but for now we consider both ports in different modes
to be an invalid configuration and prevent boot in that case.

Signed-off-by: Roger Quadros <rogerq@ti.com>
[Amjad: use overlay instead of using new am335x-ice-v2-prueth.dtb]
Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
[trini: Make prueth_is_mii be marked __maybe_unused]
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-01-16 08:31:03 -05:00
Piotr Kubik
703f8c8451 ARM: qemu-arm: Fix build fail with boot devices disabled
BOOT_TARGET_DEVICES should only be added if the corresponding u-boot
command is enabled otherwise the build will fail.

Signed-off-by: Piotr Kubik <piotr_kubik@vp.pl>
2022-01-14 14:36:57 -05:00
Pali Rohár
1dcbcc715e arm: mvebu: Replace hardcoded values 0x0030/0x4030 by proper calculation
These hardcoded values were calculated from CONFIG_SPL_TEXT_BASE macro. Now
this macro is configurable via Kconfig, so calculate values 0x0030/0x4030
at compile time via CONFIG_SPL_TEXT_BASE option. Values 0x0030/0x4030
represents offset of CONFIG_SPL_TEXT_BASE from address 0x40000000.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-14 11:39:16 +01:00
Pali Rohár
5435f6e3fd arm: mvebu: db-88f6720: Fix CONFIG_SPL_TEXT_BASE and remove wrong memory layout
Memory layout in the comment is from Armada XP platform which uses load
address 0x40004030. DB-88f6720 is Armada 375 platform which uses same load
address as Armada 38x which is 0x40000030.

Currently SPL support for Armada 375 is unfinished and does not work. There
is missing Serdes initialization and DDR3 training code. So nobody noticed
that CONFIG_SPL_* options are not correct.

Fix at least CONFIG_SPL_TEXT_BASE constant and remove incorrect comments
about memory layout. So it is not misleading.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-14 11:39:16 +01:00
Tom Rini
fe04d885fb Merge branch 'next'
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-01-10 14:01:57 -05:00
Tom Rini
0dadad6d7c - disable CONFIG_NET_RANDOM_ETHADDR when unnecessary on amlogic based configs
- meson64_android: add board specific env settings, in order to support VIM3/L for android
 - add changes to support VIM3/L android boot by using meson64_android.h config
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAmHYV8MACgkQd9zb2sjI
 SdELkA/+LjyjJB1KI6/KLLg43zyFeeZX/SjQd5BUIx6EfaCgyTkuq2lzQnErGmbi
 HoyMoNLpBxLIL27/5TXPzmKYAeOfKPxA/sXTTtx/l7PG8ncSZIoU0+utqjycdUsK
 tSi7EdFzk7/kDDRkqqA7q9nxsPn/7GQNh/ZC9zstMXKaTO/TEb/sZWCMcvQ0MNoB
 ynZKOCg5t60UkIYIRwZwC/OS/ssn86dovv/Aa/8D6qpL2AbS5DoCXHuAr8Dnz7fJ
 q4rV7oLh7a+WHe/qC7R6ylYFIVVqY5JaIgbLDwuvk1z9o7txchMMQnGgllZ35sN9
 LECD2iSDGjhPaHuGCvQwl3TWtIpvtdcP4sQTyJhsXNPxCG6HHvRz7xY4erUohR1I
 LIddwCCHeCrBiaamXNbCzph2+JhfPSQ5ETCL9M6iBMxNUPunlCxjfjDzlT/pg11p
 EO9PIPjRMR9QhxKtd3gZpyAqPuMBEmIwhDtHI6dL3DNOOsF44ObE4swnzS6qXIDn
 jRZzFCC2f/Vyg11YnzFtV3A5eWwJahGDWAGAnnlg6Y8GCLlLmDJitcgA/rWSALko
 T5fC8L8IFUx2RnHczyitJ/wqJl9FqOAnIaoB3Trpwp8gFQ15dQjbvoXldQnAjSS2
 9bns3zOrx79EF4lbHhwNE9UDLm6OjK5vR3h4bGJvyZBmasVsA90=
 =dLEg
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20220107' of https://source.denx.de/u-boot/custodians/u-boot-amlogic into next

- disable CONFIG_NET_RANDOM_ETHADDR when unnecessary on amlogic based configs
- meson64_android: add board specific env settings, in order to support VIM3/L for android
- add changes to support VIM3/L android boot by using meson64_android.h config
2022-01-09 07:56:31 -05:00
Fabio Estevam
353aa7b06f udoo: Adjust the SD card device numbering
After the conversion to DM the SD card shows up as 'mmc 2'
device.

Adjust the 'mmcdev' and the distro command 'func' accordingly.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
2022-01-08 11:16:03 -05:00
Peter Robinson
87c34fe216 udoo_neo: Enable support for USB and storage
Enable support for USB and USB storage on the UDOO Neo.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-01-07 09:30:45 -05:00
Peter Robinson
2bbe1ba0c7 udoo_neo: Fixes for booting from the mSD card
This fixes booting from the mSD card from both SPL and when
using it for the OS booting. It also cleans up a few mmc
booting bits that are no longer needed.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-01-07 09:30:44 -05:00
Mattijs Korpershoek
425f06f86e configs: prepare khadas-vim3{l}_ab_android for AOSP support
In AOSP, both VIM3 and VIM3L have 2 bootloader flavors,
depending on A/B enablement.

For example, for vim3l, the naming is:
- u-boot_kvim3l_noab.bin : legacy support
- u-boot_kvim3l_ab.bin   : A/B support

Prepare a defconfig to support u-boot_kvim3_ab.bin and
u-boot_kvim3l_ab.bin.

This is identical to khadas-vim3{l}_ab_android but will be updated in
the next commit.

Also update partitioning tables for A/B support.

Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20211122152207.219023-4-mkorpershoek@baylibre.com
2022-01-07 10:12:43 +01:00
Mattijs Korpershoek
f89b90d2d9 configs: add khadas-vim3{l}_android for AOSP support
The Khadas VIM3 and VIM3L board are well supported in AOSP[1].
However, there is no mainline U-Boot support for it.
The U-Boot used in AOSP is based on a vendor tree [2]

Add all the necessary bits to flash and boot Android for both Khadas
VIM3 and VIM3L boards.

For Android instructions, refer to [1]

[1] https://source.android.com/setup/build/devices#vim3_and_vim3l_boards
[2] https://gitlab.com/baylibre/amlogic/atv/u-boot

Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20211122152207.219023-3-mkorpershoek@baylibre.com
2022-01-07 10:12:43 +01:00
Mattijs Korpershoek
4eff7426c9 configs: meson64_android: add board specific env settings
This allows us to define extra board variables, such as "board" and
"board_name".

Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20211122152207.219023-2-mkorpershoek@baylibre.com
2022-01-07 10:12:43 +01:00
Ovidiu Panait
83b175be16 microblaze: migrate CONFIG_SYS_USR_EXCEP to Kconfig
Migrate CONFIG_SYS_USR_EXCEP to Kconfig. Also, rename it to
XILINX_MICROBLAZE0_USR_EXCEP in order to match the naming convention of
microblaze-generic Kconfig options.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Link: https://lore.kernel.org/r/20211130163358.2531677-7-ovidiu.panait@windriver.com
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2022-01-05 10:22:03 +01:00
Ovidiu Panait
70c68712ef microblaze: drop CONFIG_SYS_RESET_ADDRESS macro
Microblaze is one the last two users of the CONFIG_SYS_RESET_ADDRESS
macro (the other is arch/powerpc/cpu/mpc8xx/cpu.c, but the macro is not
defined anywhere in powerpc code, so it should be removed there too).

Replace CONFIG_SYS_RESET_ADDRESS usage in start.S with
CONFIG_SYS_TEXT_BASE. If the reset address should really be
user-configurable, a new Kconfig option could be added.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Link: https://lore.kernel.org/r/20211130163358.2531677-6-ovidiu.panait@windriver.com
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2022-01-05 10:22:03 +01:00
Mark Kettenis
3bbd6c0152 arm: apple: Remove CONFIG_SYS_SDRAM_BASE
The memory layout is taken from the device tree passed to us by
m1n1, so there is no need to define this.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2022-01-04 22:48:49 -05:00
Peter Hoyes
439581dca4 vexpress64: Enable VIRTIO_NET network driver
The SMSC driver is using the old driver model.

Init the virtio system in vexpress64.c so that the network device is
discovered.

Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
2022-01-04 22:48:48 -05:00
Peter Hoyes
90f262a695 vexpress64: Clean up BASE_FVP boot configuration
Move env var address values to #defines so they can be reused elsewhere.

Rename env var names to those recommended in the README and modify
addresses to allow more space for the kernel.

Fix issue where fdt is called with invalid arguments when booting
without a ramdisk.

Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
2022-01-04 22:48:48 -05:00
Peter Hoyes
17fe55fd6f vexpress64: Refactor header file to make it easier to add new FVPs
Rename from vexpress_aemv8a.h -> vepxress_aemv8.h as new FVPs may not be
v8-A. No change in behavior.

This is towards future work to enable support for the FVP_BaseR.

Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
2022-01-04 22:48:48 -05:00
Linus Walleij
cc4dcd488c board: stemmy: Increase boot image to 64 MB
When using a recent kernel with a bunch of compiled-in
stuff the kernel image easily becomes bigger than 8 MB
yielding this error:

  Loading Kernel Image
  Image too large: increase CONFIG_SYS_BOOTM_LEN
  Must RESET board to recover

Fix this by bumping to SZ_64MB.

Cc: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
2022-01-04 16:58:23 -05:00
Tom Rini
5fec3c853d Pull request of efi-next
Documentation:
 
 * Add Sunxi board description
 
 UEFI:
 
 * Improvements to U-Boot running on top of UEFI
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAmHOp5gACgkQxIHbvCwF
 GsTonA//Y8wwlaXA1TD6B0fIEcQiZucDJQD0nbHugx+1xw/7w9wHX1qfM4Tskqc4
 y4RA3QyoyUp7tvesP6/EA3mAUSEUp0nrtLPyCJjjXV1lrOaXhwvbdqrhOCqUQLen
 h6RNjhujVtbC90wBWYPal3Ip0hdIUROe3qp9Mk2p4zAru8jBEShn+PTRIeHvf6UV
 9BZ8j9LCivC7hUAG3Cyv+KFhW1s47IN54WddedIREEWk4vIdrUMRLjW/kW8ZbDxx
 gi1Eec25Rte6+p5k/+TJkvCwA8GC1kW+MFMYWxcAARZlUd0yr/S6ru5yaW8km0KQ
 kKgcYGp878hVB41JFEhiGUf9CkwU2oo+3NZGIfNv/vG45J4UppyqNffm9c3ZudWC
 S6DqRVPSp1YQEs45SIVZGx+LK6s1iTBn3DJ/dX68NavuUIYX2nnveUBgtW5vdzGf
 ba0yh4a0EU36hcjd2o3y3sEAjiy+PF8SAZ+f2HQ7JaLjsCWF1zNFGsiAxaEStHp8
 aVrUN0cWQPKnnI2A8DCqjmMaSBDKZDK59k6EeC1ZFdMmGivHEO61A0sDiUTz+IRW
 U7XLvjAA5IVKAtij6T/iab6qvhgwABJRL9lZI5DMiFxJRSl4uSYe9YviG7+EzUg0
 XMIs5nK6jBB74HPKqhBouiSUiRa9UHY/rdyNhJACHQ8GODzCf04=
 =YdSB
 -----END PGP SIGNATURE-----

Merge tag 'efi-next' of https://source.denx.de/u-boot/custodians/u-boot-efi into next

Pull request of efi-next

Documentation:

* Add Sunxi board description

UEFI:

* Improvements to U-Boot running on top of UEFI
2021-12-31 07:28:36 -05:00
Simon Glass
13bfaab3da efi: Allow easy selection of serial-only operation
Add info about how to select vidconsole or serial.

Also set up a demo boot command.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-31 07:18:56 +01:00
Tom Rini
87a9aa604d - various fixes to the sandbox display support
- support for showing a logo without splash screen config
 - support for BMP drawing to depths other than 16bpp
 - tests for the different types of supported BMP images
 - support showing a logo when running coreboot via qemu
 -----BEGIN PGP SIGNATURE-----
 
 iGwEABECACwWIQSC4hxrSoIUVfFO0kRM6ATMmsalXAUCYcsdCQ4cYWd1c3RAZGVu
 eC5kZQAKCRBM6ATMmsalXCLhAJ9pLJE3SpQRzpm+Nu4EMbCDzZKr+wCfbxnAZ9LC
 zS1XZ6u9Se4ysDb+PYs=
 =Hf5j
 -----END PGP SIGNATURE-----

Merge tag 'video-next-20211228' of https://source.denx.de/u-boot/custodians/u-boot-video into next

- various fixes to the sandbox display support
- support for showing a logo without splash screen config
- support for BMP drawing to depths other than 16bpp
- tests for the different types of supported BMP images
- support showing a logo when running coreboot via qemu
2021-12-28 11:28:31 -05:00
Tom Rini
968c6210e6 Convert CONFIG_JFFS2_DEV et al to Kconfig
This converts the following to Kconfig:
   CONFIG_JFFS2_DEV
   CONFIG_JFFS2_LZO
   CONFIG_JFFS2_NAND
   CONFIG_JFFS2_PART_OFFSET
   CONFIG_JFFS2_PART_SIZE

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:19 -05:00
Tom Rini
b2d1c828b9 Convert CONFIG_KIRKWOOD_GPIO to Kconfig
This converts the following to Kconfig:
   CONFIG_KIRKWOOD_GPIO

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:19 -05:00
Tom Rini
440c00de69 Convert CONFIG_SYS_KWD_CONFIG to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_KWD_CONFIG

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:19 -05:00
Tom Rini
f98b3be287 Convert CONFIG_88F5182 et al to Kconfig
This converts the following to Kconfig:
   CONFIG_88F5182
   CONFIG_BOARD_IS_OPENRD_BASE
   CONFIG_BOARD_IS_OPENRD_CLIENT
   CONFIG_BOARD_IS_OPENRD_ULTIMATE
   CONFIG_D2NET_V2
   CONFIG_FEROCEON
   CONFIG_FEROCEON_88FR131
   CONFIG_INETSPACE_V2
   CONFIG_KW88F6192
   CONFIG_KW88F6281
   CONFIG_KW88F6702
   CONFIG_NET2BIG_V2
   CONFIG_NETSPACE_LITE_V2
   CONFIG_NETSPACE_MAX_V2
   CONFIG_NETSPACE_MINI_V2
   CONFIG_NETSPACE_V2
   CONFIG_SHEEVA_88SV131

At this point mv-plug-common.h is now only an include of mv-common.h so
remove that indirection.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:19 -05:00
Tom Rini
e7b7c6761a Convert CONFIG_CPU_FREQ_HZ to Kconfig
This converts the following to Kconfig:
   CONFIG_CPU_FREQ_HZ

Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:19 -05:00
Tom Rini
855e76b5cb Convert CONFIG_CPU_SH7751 to Kconfig
This converts the following to Kconfig:
   CONFIG_CPU_SH7751

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:19 -05:00
Tom Rini
3aca2b6bd7 Convert CONFIG_CPU_PXA27X to Kconfig
This converts the following to Kconfig:
   CONFIG_CPU_PXA27X

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:19 -05:00
Tom Rini
6328f95ea0 serial: arm_dcc: Use CONFIG_ARM64 not CONFIG_CPU_ARMV8
The only place we use CONFIG_CPU_ARMV8 was in the arm_dcc serial driver.
Switch this to CONFIG_ARM64 today, and if in the future we need finer
granularity tuning here, a new CONFIG_SERIAL option needs to be
introduced.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:18 -05:00
Tom Rini
7e11f95b02 Convert CONFIG_SYS_I2C_EEPROM_ADDR_LEN to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_I2C_EEPROM_ADDR_LEN

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:18 -05:00
Tom Rini
3569ac7afa ppc: mpc83xx: Remove unused CONFIG symbols
Neither of these symbols are referenced anywhere else, so remove them.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:18 -05:00
Tom Rini
86e4c4f7b3 Convert CONFIG_83XX_PCICLK to Kconfig
This converts the following to Kconfig:
   CONFIG_83XX_PCICLK

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:18 -05:00
Tom Rini
2f8a6db5d8 Finish conversion of CONFIG_SYS_CLK_FREQ to Kconfig
In order to finish moving this symbol to Kconfig for all platforms, we
need to do a few more things.  First, for all platforms that define this
to a function, introduce CONFIG_DYNAMIC_SYS_CLK_FREQ, similar to
CONFIG_DYNAMIC_DDR_CLK_FREQ and populate clock_legacy.h.  This entails
also switching all users from CONFIG_SYS_CLK_FREQ to get_board_sys_clk()
and updating a few preprocessor tests.

With that done, all platforms that define a value here can be converted
to Kconfig, and a fall-back of zero is sufficiently safe to use (and
what is used today in cases where code may or may not have this
available).  Make sure that code which calls this function includes
<clock_legacy.h> to get the prototype.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:18 -05:00
Tom Rini
e4c3ce7e28 CONFIG_SYS_CLK_FREQ: Consistently be static or get_board_sys_clk()
This CONFIG option is used in one of two ways.  The first way is that it
is defined to a static value, of an unsigned long size.  The second way
is that it is defined to something, typically a function, to determine
this value at run time.

However, in a few cases that function returns a static value.  Change
that to using the static value directly.

In the case of using something at run time, convert everything to using
a function of the same name and prototype.  This will allow for further
cleanups.

Finally, we have a few cases where the function is just not used, so
drop it.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:18 -05:00
Tom Rini
2196a4a7ef arm: s5pc1xx: Move CONFIG_SYS_CLK_FREQ_C1x0 out of CONFIG namespace
The values CONFIG_SYS_CLK_FREQ_C100 and CONFIG_SYS_CLK_FREQ_C110 are
only used in one place and not changed by the board config file.  Move
these out of the CONFIG namespace and in to the CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:18 -05:00
Tom Rini
ba1ed5b022 Convert CONFIG_ARCH_MAP_SYSMEM to Kconfig
This converts the following to Kconfig:
   CONFIG_ARCH_MAP_SYSMEM

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:18 -05:00
Tom Rini
9ec4df336e Convert CONFIG_SYS_NAND_U_BOOT_OFFS to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_NAND_U_BOOT_OFFS

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:18 -05:00
Tom Rini
1b46518736 Convert CONFIG_TPL_TEXT_BASE to Kconfig
This converts the following to Kconfig:
   CONFIG_TPL_TEXT_BASE

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:18 -05:00
Tom Rini
ed35de6170 Convert CONFIG_ZYNQMP_PSU_INIT_ENABLED to Kconfig
This converts the following to Kconfig:
   CONFIG_ZYNQMP_PSU_INIT_ENABLED

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:18 -05:00
Tom Rini
068c41f1cc Finish conversion CONFIG_SYS_NAND_SELF_INIT to Kconfig
In order to finish this conversion we need to add a symbols for
SPL_SYS_NAND_SELF_INIT and TPL_SYS_NAND_SELF_INIT as there are cases
there where we need to, or need to not, use that framework as things
stand.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:18 -05:00
Tom Rini
bfb5387fe9 Convert CONFIG_TEGRA_NAND to Kconfig
This converts the following to Kconfig:
   CONFIG_TEGRA_NAND

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:18 -05:00
Tom Rini
ada261f19a Finish converting CONFIG_SYS_FSL_CLK to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_FSL_CLK

We move the exiting option to common/Kconfig near the other options to
control the contents of board_init_f() and note that this is a legacy
option.  We further restrict this to where the call is going to be
non-empty, for the SoCs that had only been using this for some
MMC-related clocks.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:18 -05:00
Tom Rini
6880b330a9 warp7, pic32mzdask: Remove SYS_FDT_ADDR/SYS_ENV_ADDR from CONFIG namespace
In the case of CONFIG_SYS_FDT_ADDR this was being used to modify the
default value of fdt_addr / fdt_addr_r, which is not something to expose
in this manner and is not otherwise done.  The case of SYS_ENV_ADDR is
similar but only done on the pic32mzdask platform, for scriptaddr.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:18 -05:00
Tom Rini
7856cd5a6d Convert CONFIG_SYS_PCI_64BIT to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_PCI_64BIT

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:17 -05:00
Tom Rini
d06e4b7e25 Finish CONFIG_VID et al conversion to Kconfig
This converts the following to Kconfig:
   CONFIG_VID
   CONFIG_VOL_MONITOR_INA220
   CONFIG_VOL_MONITOR_IR36021_READ
   CONFIG_VOL_MONITOR_IR36021_SET
   CONFIG_VOL_MONITOR_LTC3882_READ
   CONFIG_VOL_MONITOR_LTC3882_SET

To finish this migration, we first need to introduce CONFIG_SPL_VID as
some platforms only use this code in full U-Boot while others use it in
SPL as well.  To make the Kconfig logic clearer, guard all of the
sub-options with a if VID || SPL_VID check.  Finally, add Kconfig
options for the remaining related options that did not previously have
one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 08:41:38 -05:00
Tom Rini
be7dbb60c5 Convert CONFIG_SYS_IMMR to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_IMMR

We do this by consolidating the SYS_IMMR options we have and providing
defaults.

We also, in the few places where M68K was also sharing code with these
platforms, define it within the file to CONFIG_SYS_MBAR to match usage.
This should be cleaned up longer term.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 08:41:38 -05:00
Tom Rini
ff27af1244 Convert CONFIG_SYS_MEMTEST_START et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_MEMTEST_START
   CONFIG_SYS_MEMTEST_END

This is removing unused defines and correcting the default value to be
0x0 as we are a hex symbol.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 08:41:38 -05:00
Tom Rini
82edd73762 Convert CONFIG_WATCHDOG_TIMEOUT_MSECS to Kconfig
This converts the following to Kconfig:
   CONFIG_WATCHDOG_TIMEOUT_MSECS

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 08:41:38 -05:00
Tom Rini
3847ba94f0 Finish converting CONFIG_WATCHDOG, HW_WATCHDOG and WDT to Kconfig
Because of how these symbols work, and the remaining board config.h file
uses, we need to do these at the same time.  In some cases we just get
to move rather directly to the defconfigs.  A few cases require manual
intervention.

For the case of the eb_cpu5282 we need to select HW_WATCHDOG for the
target, given how it's implemented.

For the cases of m53menlo, dh_imx6, display5, and display5_factory we
disable SPL watchdog support as the particular combination of options
they want would require either more symbols or enabling SPL_DM.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 08:41:38 -05:00
Tom Rini
4d69303299 Convert CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT

In order to do this conversion, expose this option to the user and
use "save" not "safe" in the text.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 08:41:38 -05:00
Tom Rini
d5bfef2fcd Convert CONFIG_SUPPORT_EMMC_RPMB to Kconfig
This converts the following to Kconfig:
   CONFIG_SUPPORT_EMMC_RPMB

This fixes a few platforms where the option was not taking effect as
intended.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 08:41:38 -05:00
Tom Rini
de35b8f9c5 Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace
This option is used as part of configuring the default environment for a
number of platforms.  However, it is always set to 1 and the only time
it is part of Kconfig, it is used in a hard-coded manner.  Hard-code the
value in the environment instead.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 08:41:38 -05:00
Tom Rini
f76750d111 Convert CONFIG_CONS_INDEX et al to Kconfig
This converts the following to Kconfig:
   CONFIG_CONS_INDEX
   CONFIG_DEBUG_UART_CLOCK
   CONFIG_FSL_TZPC_BP147
   CONFIG_GENERIC_ATMEL_MCI
   CONFIG_IDENT_STRING
   CONFIG_LIBATA
   CONFIG_LNX_KRNL_IMG_TEXT_OFFSET_BASE
   CONFIG_LPC32XX_GPIO
   CONFIG_MP
   CONFIG_MPC8XXX_GPIO
   CONFIG_MTD_PARTITIONS
   CONFIG_MVGBE
   CONFIG_MXC_GPIO
   CONFIG_NR_DRAM_BANKS
   CONFIG_OF_BOARD_SETUP
   CONFIG_OF_STDOUT_VIA_ALIAS
   CONFIG_OF_SYSTEM_SETUP
   CONFIG_PREBOOT
   CONFIG_ROCKCHIP_SERIAL
   CONFIG_RTC_ENABLE_32KHZ_OUTPUT
   CONFIG_RTC_MV
   CONFIG_SCSI_AHCI
   CONFIG_SF_DEFAULT_BUS
   CONFIG_SF_DEFAULT_CS
   CONFIG_SF_DEFAULT_SPEED
   CONFIG_SOFT_SPI
   CONFIG_SPI_FLASH_EON
   CONFIG_SPI_FLASH_MACRONIX
   CONFIG_SPI_FLASH_MTD
   CONFIG_SPI_FLASH_SPANSION
   CONFIG_SPI_FLASH_SST
   CONFIG_SPI_FLASH_STMICRO
   CONFIG_SUPPORT_RAW_INITRD
   CONFIG_SYS_ARCH_TIMER
   CONFIG_SYS_BOARD
   CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
   CONFIG_SYS_DCACHE_OFF
   CONFIG_SYS_FDT_SAVE_ADDRESS
   CONFIG_SYS_FLASH_CFI
   CONFIG_SYS_FSL_ERRATUM_ESDHC135
   CONFIG_SYS_HAS_SERDES
   CONFIG_SYS_L2CACHE_OFF
   CONFIG_SYS_LITTLE_ENDIAN
   CONFIG_SYS_LOAD_ADDR
   CONFIG_SYS_MMCSD_FS_BOOT_PARTITION
   CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION
   CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR
   CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
   CONFIG_SYS_NS16550
   CONFIG_SYS_PLLFIN
   CONFIG_SYS_SPI_U_BOOT_OFFS
   CONFIG_TIMER_SYS_TICK_CH
   CONFIG_USB_EHCI_FSL
   CONFIG_U_QE
   CONFIG_VERSION_VARIABLE

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 08:41:38 -05:00
Tom Rini
98ab831da7 Convert CONFIG_FSL_IFC to Kconfig
This converts the following to Kconfig:
   CONFIG_FSL_IFC

This is done via select statements to match previous logic.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 08:40:33 -05:00
Tom Rini
7e6a6fd821 Convert CONFIG_ENV_SPI_BUS et al to Kconfig
This converts the following to Kconfig:
   CONFIG_ENV_SPI_BUS
   CONFIG_ENV_SPI_CS
   CONFIG_ENV_SPI_MAX_HZ
   CONFIG_ENV_SPI_MODE

As part of this, we use Kconfig to provide the defaults now that were
done in include/spi_flash.h.  We also in some cases change from using
CONFIG_ENV_SPI_FOO to CONFIG_SF_DEFAULT_FOO as those were the values in
use anyhow as ENV was not enabled.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 08:40:33 -05:00
Tom Rini
936c8559df arm: Drop unused tam3517-common.h
With the relevant platforms removed, drop this file.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 08:40:33 -05:00
Simon Glass
e567122b32 x86: coreboot: Support getting a logo from virtio
Enable this feature so that a splash screen can be provided.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-26 23:33:26 +01:00
Simon Glass
64cfeda8ae video: Convert CONFIG_VIDEO_LOGO to Kconfig
This converts the following to Kconfig:
   CONFIG_VIDEO_LOGO

Note that this option depends on CONFIG_DM_VIDEO now, since cfb_console is
deprecated. The only relevant code is now in splash.c

Drop the check for DM_VIDEO in that file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-26 23:24:46 +01:00
Nico Cheng
daec31e5cc rockchip: Kconfig: Enable SPL support for rk3568
Enable SPL support in Kconfig and add some related option in
rk3568_common.h

Signed-off-by: Nico Cheng <nico.cheng@rock-chips.com>
Signed-off-by: Jason Zhu <jason.zhu@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-12-24 11:10:24 +08:00
Tom Rini
4afab30cae Prepare v2022.01-rc4
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAmHArDwACgkQFHw5/5Y0
 tyzxyAv/SjZjoEwG8nu7ptVZqTsZfm+tVwwWmQEBAA40MXy/KSccDtbUwB5GCO6f
 Uvk+qFFDbCkbGZh5VKbQusMmUoB02Xu9zUoSxKxcXL4WfC6Bg5GV/UWN9s8G3Tm6
 4wcP0l8WFcQjjr89UfXugiZH58psvFu6PBbWVY4rMH9gZ5ds0AkNOF0L+HbdVmMR
 a5HBfrcySRY2kiTQuKF+RVlMW6BtaOqJp/XIyy8w6bH09ykMomj/u7z3JP3y9ZzL
 w3FXqCLlIEnvdDcqfWvfjoJ/gm0WcLulgSVpTFGS0jgJpnbeAURtZcuVgj6aPRUW
 FRon+u0tj3wpFjibs2cpyXWd+gw/bLLFpDXx78AUAPjxG31tEKbnR1j8R8wBZJ0B
 TqWZ3pCne/LPOT90y2KW2z6ty2n/yEn6qEFFT9MN9R4L0N+U0er//sYJC/nn/e6u
 fjvQ9OPLbnAfHVrad3ZeIkePrLOIF6XYwNQpsjt9aE2kU9IvV5sTa8TxZuQgasBU
 A46FgXtC
 =MEG2
 -----END PGP SIGNATURE-----

Merge tag 'v2022.01-rc4' into next

Prepare v2022.01-rc4
2021-12-20 17:12:04 -05:00
Simon Glass
6405ab7ad5 Convert CONFIG_PHYSMEM to Kconfig
This converts the following to Kconfig:
   CONFIG_PHYSMEM

Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Sean Anderson <seanga2@gmail.com>
2021-12-17 09:44:59 -07:00
Tom Rini
e09ca91cfa - enable RPi Zero 2 W
- fix MMC numbering issue
 - Update link to documentation
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEUdvKHhzqrUYPB/u8L21+TfbCqH4FAmG6FZ8SHG1icnVnZ2Vy
 QHN1c2UuY29tAAoJEC9tfk32wqh+NigQAK+M5odbqCXRyMhdJzkP7bccQ80dFA/3
 aGcAfPMd6qIqm75Z5iqAhBLjiR4WQ79Amswu5B/HthLaelurHe21/hDEXBxmCvI3
 dUw1u702kyxHFoU0bKHhtR/+RNsJq7TYuFdAwE1xsjRvO/UAaEyll85euC9ZxrR4
 1llrqt0qKtMEQzS4XRAiODl3Nv2o/9ckFKsJYuk8XVpaYnjiG+hk/v+LlyVVEWqY
 dCCiSIDVKYFtaamee54qvi6cuCp4JjWW+XS9a6Yz8V6kfsHVrW42Xcm4oIiyAffQ
 CUDZr2350WcldO7NNS1pB78jAYmCam/eVFnDkji+0BqwgPzYu7eBCz2biCjF4W4T
 ZujSfPlHapnE84/RHKqc3w6W1uukJEFV3t2P72VZoFCJ8SxcBmyOTteDeYt/TFfn
 iiWOw5TiGOQnthc7YtbTWtQ1R1EzpxESgyYfzbRAEmyWu7VkwXuM2Lz9gJjDKOvz
 PkOrjxeOT/VH1x3GbmcGJNfY9MMzNcbLBr0LTJ+n/PLCzW3zqJOm+SjMHp7P2Lb5
 awEgrYtkkyYidkq8SdHAHfUf2nd2eR5XEtbDcyr9t9CDTaK0KJpWOdYr15E4Y0bk
 fiLP9z0Q2pN7OqcPAoMdrhdql80UBZJYo5rFGbj/m++L0GMZRAoWELschVMCjpu4
 7pOro6+it1v0
 =xnZF
 -----END PGP SIGNATURE-----

Merge tag 'rpi-next-2022.01' of https://source.denx.de/u-boot/custodians/u-boot-raspberrypi

- enable RPi Zero 2 W
- fix MMC numbering issue
- Update link to documentation
2021-12-15 11:49:30 -05:00
Tom Rini
cfbd2bc695 - enable KSZ90x1 PHY driver on DHCOR
- DHSOM boards:
   - increase USB power-good delay
   - add update_sf script to install U-Boot into SF
   - increase PHY auto-negotiation timeout to 20 seconds
   - fix SoM and board coding strap GPIO handling
 -----BEGIN PGP SIGNATURE-----
 
 iQJQBAABCgA6FiEEXyrViUccKBz9c35Jysd4L3sz/6YFAmG3TqYcHHBhdHJpY2Uu
 Y2hvdGFyZEBmb3NzLnN0LmNvbQAKCRDKx3gvezP/puhJEACl9lNg7+0GDd6eoi73
 NR4+r1JYPDkYKbbBWjHVueIwKYbpk1uSzYLB70lchUVbdvu3fczJc7uOXTDRnrCN
 13BuMa45HAWxvb/9UuHz3AnrLEsSvEgGCRCXK0FrE0mu1yBZK+6iO1ysuQEJA78j
 7tyBs6i+IzuAusejx8NiqjYughIFZKBzfztLe3OSxDhEam+vCCEAIUoTx7FSq1jp
 TumZULkfx0SCSL86vPnzczjtucrtKiaWhjNLDbg0Ilf28qYYTCdlDcpi7ySpr43u
 VJTAKAXYVQq4Ye3qsth6GSsTZ1pONBoSaaOo2z/hoQu+/Y4+yUrzkLB+0dSrqgsW
 FPosN9/OPSRcBIfhFEV9RojhHK9OxYXr0WjBctb6fZKzHK52neVv819Ixy5WBJvq
 gXo6jK78ILxzOUx1PzRj2safKhArAuPrxD2Lv0wNKqNCWJJZbT037L6p5CFG30UI
 7yltaYm1ukAT6q6MeergHAAcdgYV+nyFOUs7udQY5HltzLpBJkdIGHKJpioAhvYJ
 KNHMwANd499/edL/FdXXN7X8sfb7ylaUaqDfkHPJgfDDFmF4lQ591k+jWeD8H1lo
 LYUhd4/7EvNAS02fvwmrdTWYCCFyxL1HFxwOlFqrkthFJnJj70shBJsB786pvihq
 wd9npDIUFJGSTCTA4uXCu3YHlA==
 =Qgdj
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20211213' of https://source.denx.de/u-boot/custodians/u-boot-stm

- enable KSZ90x1 PHY driver on DHCOR
- DHSOM boards:
  - increase USB power-good delay
  - add update_sf script to install U-Boot into SF
  - increase PHY auto-negotiation timeout to 20 seconds
  - fix SoM and board coding strap GPIO handling

# gpg verification failed.
2021-12-13 10:20:25 -05:00
Marek Vasut
e1d7b0b9c5 ARM: stm32: Increase PHY auto-negotiation timeout to 20s on DHSOM
The Micrel PHYs on known DHSOM based boards take a while to come out
of reset, increase the auto-negotiation timeout to prevent it from
timing out in case the ethernet is used right after the board was
reset.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-12-13 14:33:59 +01:00
Marek Vasut
44beea2845 ARM: stm32: Add update_sf script to install U-Boot into SF on DHSOM
Add script to read U-Boot from SD card and write it to matching
locations in the SPI NOR, thus making the SPI NOR bootable. The
script erases the entire SPI NOR, including U-Boot environment,
to make sure the installation is clean. To retain environment
from current running U-Boot, run 'saveenv' after running the
'update_sf' script.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-12-13 14:33:53 +01:00
Marek Vasut
e8e66801bd ARM: stm32: Increase USB power-good delay on DHSOM
The USB hub on STM32MP1 DHCOM boards needs to wait a bit longer until
the USB Vbus is stable. Increase the USB power-good delay to 1 s.

This adds default-undefined STM32MP_BOARD_EXTRA_ENV variable into
stm32mp15_common.h to reduce duplication in board-specific config
files adding custom environment.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-12-13 14:33:47 +01:00
Adam Ford
d5f1beb058 configs: beacon-rzg2m: Config to address new aliases
The resync of the device trees from Linux 5.16-rc3 caused aliases
to appear on the MMC devices which changed the numbering.
This changed the default boot device and caused boot failure.
Update the mmcdev variable to reflect the new aliases.

Signed-off-by: Adam Ford <aford173@gmail.com>
2021-12-13 00:37:28 +01:00
Simon Glass
7ee2016d61 ide: Drop unused CONFIG options
CONFIG_SYS_ATA_PORT_ADDR is not used in the code anymore. Drop it and use
ATA_PORT_ADDR() locally instead.

Drop CONFIG_IDE_RESET_ROUTINE and CONFIG_IDE_SWAP_IO which are also
unused.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-05 09:26:26 -07:00
Simon Glass
36cc7bfd54 sandbox: Drop CONFIG_SYS_TIMER_RATE
This is not used by sandbox since it uses driver model for the timer.

Drop it.

Also update the tools_only build to avoid build errors, since it does
actually build U-Boot too. Enable DM so we can use CONFIG_TIMER,
disable EFI_LOADER to avoid an error about board_quiesce_devices() and
disable NET to avoid having to define CONFIG_AVB_BUF_ADDR

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-05 09:26:26 -07:00
Simon Glass
93e1edffb0 Convert CONFIG_KEYBOARD to Kconfig
This converts the following to Kconfig:
   CONFIG_KEYBOARD

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-05 09:26:26 -07:00
Simon Glass
5ae2578a55 Convert CONFIG_SYS_FDT_LOAD_ADDR to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_FDT_LOAD_ADDR

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-05 09:23:15 -07:00
Simon Glass
32c8566f13 sandbox: Drop CONFIG_HOST_MAX_DEVICES
This can go in the related header file. Drop the CONFIG option.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-12-05 09:23:15 -07:00
Leo Yu-Chi Liang
666da85dc9 board: ae350: Support autoboot from RAM
Add boot command "bootcmd_ram" to support autoboot from RAM.

This feature could be useful at the very initial state of chip design
when there is only a minimal set of peripheral. (e.g. without mmc and mac ..etc)

The kernel image is default to be loaded at 0x2000000 via debug port,
and the following script serves as an example:

spl()
{
	cmd="riscv64-linux-gdb -q \
	-ex \"target remote $host:$port\" \
	-ex \"load\" \
	-ex \"thread apply all set \\\$pc=&_start\" \
	-ex \"thread apply all set \\\$a0=\\\$mhartid\" \
	-ex \"thread apply all set \\\$a1=<dtb address>\" \
	-ex \"restore u-boot.itb binary 0x200000\" \
	-ex \"restore Image binary 0x2000000\" \
	-ex \"c\" \
	spl/u-boot-spl
	"

	echo $cmd
	eval $cmd
}

The address where the kernel is loaded can be altered by
changing the value of KERNEL_IMAGE_ADDR.

Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Rick Chen <rick@andestech.com>
2021-12-02 16:43:45 +08:00
Tom Rini
33b02e93ec Convert CONFIG_FSL_DDR_BIST et al to Kconfig
This converts the following to Kconfig:
   CONFIG_FSL_DDR_BIST
   CONFIG_FSL_DDR_INTERACTIVE

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-01 10:58:11 -05:00
Tom Rini
c7fad78ec0 Convert CONFIG_SYS_BR0_PRELIM et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_BR0_PRELIM
   CONFIG_SYS_OR1_PRELIM
   CONFIG_SYS_BR1_PRELIM
   CONFIG_SYS_OR2_PRELIM
   CONFIG_SYS_BR2_PRELIM
   CONFIG_SYS_OR2_PRELIM
   CONFIG_SYS_BR3_PRELIM
   CONFIG_SYS_OR3_PRELIM
   CONFIG_SYS_BR4_PRELIM
   CONFIG_SYS_OR4_PRELIM
   CONFIG_SYS_BR5_PRELIM
   CONFIG_SYS_OR5_PRELIM
   CONFIG_SYS_BR6_PRELIM
   CONFIG_SYS_OR6_PRELIM
   CONFIG_SYS_BR7_PRELIM
   CONFIG_SYS_OR7_PRELIM

This also introduces CONFIG_SYS_BR0_PRELIM_BOOL as not all platforms
that can set these values do so.  Add the relevant SYS_BRx_PRELIM_BOOL
to platforms that had not been previously migrated.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-01 10:58:10 -05:00
Tom Rini
970bf8603b Convert CONFIG_USE_BOOTCOMMAND et al to Kconfig
This converts the following to Kconfig:
   CONFIG_USE_BOOTCOMMAND
   CONFIG_BOOTCOMMAND
   CONFIG_RAMBOOTCOMMAND
   CONFIG_NFSBOOTCOMMAND

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-01 10:58:10 -05:00
Patrick Delaunay
d71587c2ab Convert CONFIG_LCD_DT_SIMPLEFB to Kconfig
This converts the following to Kconfig:
   CONFIG_LCD_DT_SIMPLEFB

This patch also renames this config to CONFIG_FDT_SIMPLEFB as the code in
common/lcd_simplefb.c support CONFIG_LCD and CONFIG_VIDEO.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
2021-11-30 16:43:28 +01:00
Marek Vasut
5e3e882cf2 ARM: stm32: Increase PHY auto-negotiation timeout to 20s on DHSOM
The Micrel PHYs on known DHSOM based boards take a while to come out
of reset, increase the auto-negotiation timeout to prevent it from
timing out in case the ethernet is used right after the board was
reset.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-30 16:43:27 +01:00
Marek Vasut
1aba8e51d8 ARM: stm32: Add update_sf script to install U-Boot into SF on DHSOM
Add script to read U-Boot from SD card and write it to matching
locations in the SPI NOR, thus making the SPI NOR bootable. The
script erases the entire SPI NOR, including U-Boot environment,
to make sure the installation is clean. To retain environment
from current running U-Boot, run 'saveenv' after running the
'update_sf' script.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-30 16:41:21 +01:00
Marek Vasut
15e20e4bdf ARM: stm32: Increase USB power-good delay on DHSOM
The USB hub on STM32MP1 DHCOM boards needs to wait a bit longer until
the USB Vbus is stable. Increase the USB power-good delay to 1 s.

This adds default-undefined STM32MP_BOARD_EXTRA_ENV variable into
stm32mp15_common.h to reduce duplication in board-specific config
files adding custom environment.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-11-30 16:41:21 +01:00
Mike Karels
874e544e89 Fix MMC numbering issue for Raspberry Pi 3
Using mmc.dtbo from rpi-firmware to switch the controller for the SD
card slot from sdhci to sdhost causes the numbering to change; the
SD card is then not recognized at boot.  Add to the range checked.

Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2021-11-30 16:07:40 +01:00
Tom Rini
2402c93130 Prepare v2022.01-rc3
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAmGk/4sACgkQFHw5/5Y0
 tyyjtgwAo0jCRa1Vyc5z2RrINGdARoPhNcCnBNMYEVTjH9uP0/Mzlpo4i1IWX5qP
 nEuVmP01KjtWDRNy7Cpr45/j2PkTZ0THqXGZKpTG/yALdUKZw0wbzeh/CMllWh0A
 9yJfMbv2/IV79rbb6osxItjusSr5PnrU5fHsR+zUfC8NRZpzWGfpH8a6NpfGvGYo
 3OUKNJrGv930C3MqVnUEHPIuz+vL9fWLSs/rK/JHVZt+ALU45uYtz4cKycMoElVd
 IUJe3mhKhw0k8dO8R+p3UAEFrP+LZdcBLgCt8wRQK6Yl4lcxYOtZgYuJuM9Kp20s
 abqIuky3TWwFjpNM60Gmo63Yf967jOeI/lfITq2juZ5TBlNKOO6Z/NRVUsHkNKFG
 7qJC14/NxuSdN4u9s2h+rJBBGYc+BzWVO/ikigHnsCeFQYfafJpGTnPSJr55OU5X
 eeB6l3blx6jwxOPAz0JhLecZb4e027R+eKionirMEnVPENtnJjF1d+CulkekahUO
 LvdqKaBE
 =h4j5
 -----END PGP SIGNATURE-----

Merge tag 'v2022.01-rc3' into next

Prepare v2022.01-rc3

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-29 12:00:57 -05:00
Neil Armstrong
28f70cfcfd configs: meson64_android: add PANIC stage for SYSTEM fails
If bootloader was updated without running oem format, reboot will cause
boot loop because the SYSTEM stage fails.

Add a final PANIC stage running fastboot to permit recovery.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2021-11-19 18:15:26 +01:00
Neil Armstrong
bdc68df4dd configs: meson64_android: bypass other checks on run_fastboot=1
This can lead to GPT and BCB errors even if fastboot was selected early
by usb rom boot and the eMMC is blank/invalid.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2021-11-19 18:15:26 +01:00
Chia-Wei Wang
e3cdc2cbb1 configs: ast2600: Boot kernel FIT in DRAM
AST2600 leverages the FIT hash/signature verification to fulfill
secure boot trust chain. To improve the performance and save SW
code size for those crypto operations, the two HW crypto engine,
HACE and ACRY, are enabled.

However, both of the engines can only access to data stored in
DRAM space. Therefore, we need to move the FIT image into DRAM
before the booting.

This patch update the CONFIG_BOOTCOMMAND to execute the pre-defined
ENV variable which consists of FIT image copy to memory and booting.

Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
2021-11-17 17:05:57 -05:00
Chia-Wei Wang
3aeb239f51 configs: aspeed: Make EXTRA_ENV_SETTINGS board specific
Move CONFIG_EXTRA_ENV_SETTINGS to board-specific
configuration headers.

Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
2021-11-17 17:05:57 -05:00
Simon Glass
f501bb4c2a sandbox: Use a text-based environment
Use a text file for the environment instead of the #define settings.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
2021-11-16 14:35:08 -05:00
Simon Glass
79c0e8a935 sandbox: Drop distro_boot
This is a complicated set of #defines and it is painful to convert to a
text file. We can (once pending patches are applied) provide the same
functionality with bootmethod. Drop this for sandbox to allow conversion
to a text-file environment.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
2021-11-16 14:35:08 -05:00
Masami Hiramatsu
4d492b0c0f configs: synquacer: Fix dfu_alt_info to use nor1
Fix dfu_alt_info to use nor1 instead of the device name.
This reverts a part of commit 59bd18d4c4 ("configs: synquacer:
Remove mtdparts settings and update DFU setting") because the
commit a4f2d83414 ("mtd: spi: nor: force mtd name to "nor%d"")
changed the mtd device naming scheme to nor%d.

Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-11-15 14:33:32 -05:00
Matthias Schiffer
a5e305256b board: tq: fix spelling of "TQ-Systems"
"TQ-Systems" is written with a dash.

Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
2021-11-15 14:33:32 -05:00
Tom Rini
82cd1e3da0 Convert CONFIG_LAST_STAGE_INIT to Kconfig
This converts the following to Kconfig:
   CONFIG_LAST_STAGE_INIT

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12 14:18:17 -05:00
Tom Rini
d3fb2e3991 Remove CONFIG_SERIAL_MULTI
This symbol has been functionally dead for a long time.  Remove the last
and recent re-introductions of setting it, and update the whitelist so
it will not be re-introduced again.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12 14:18:17 -05:00
Tom Rini
1914075c88 Convert CONFIG_PL011_SERIAL et al to Kconfig
This converts the following to Kconfig:
   CONFIG_PL011_SERIAL
   CONFIG_PL01X_SERIAL

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12 14:18:17 -05:00
Tom Rini
b8475e6aca Convert CONFIG_MACB to Kconfig
This converts the following to Kconfig:
   CONFIG_MACB

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12 14:18:17 -05:00
Tom Rini
dfb34d0d4a Convert CONFIG_MD5 to Kconfig
This converts the following to Kconfig:
   CONFIG_MD5

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12 14:18:17 -05:00