Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-10 07:04:28 +00:00
Code Issues Projects Releases Packages Wiki Activity

sunxi: video: Convert panel I2C to use DM_I2C

Browse source 
Two displays supported by the sunxi display driver (each one used by a
single board) require initialization over I2C. Both previously used
i2c_soft; replace this with the i2c-gpio instance that already exists in
those boards' device trees (sun5i-a13-utoo-p66 and sun6i-a31-colombus).

Since the i2c-gpio nodes are not referenced by any other node in the
device trees (the device trees have no panel node), the I2C bus is
selected by its node name.

This panel initialization code was the only i2c_soft user, so the
i2c_soft GPIO setup code can be removed now as well.

Reviewed-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
This commit is contained in:
Samuel Holland 2021-10-08 00:17:24 -05:00 committed by Andre Przywara
parent 8b0eacdf2b
commit 2421497cb7
8 changed files with 100 additions and 154 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

21
arch/arm/mach-sunxi/Kconfig
View file

@ -909,27 +909,18 @@ config VIDEO_LCD_BL_PWM_ACTIVE_LOW
config VIDEO_LCD_PANEL_I2C
bool "LCD panel needs to be configured via i2c"
depends on VIDEO_SUNXI
select CMD_I2C
select DM_I2C
select DM_I2C_GPIO
---help---
Say y here if the LCD panel needs to be configured via i2c. This
will add a bitbang i2c controller using gpios to talk to the LCD.
config VIDEO_LCD_PANEL_I2C_SDA
string "LCD panel i2c interface SDA pin"
config VIDEO_LCD_PANEL_I2C_NAME
string "LCD panel i2c interface node name"
depends on VIDEO_LCD_PANEL_I2C
default "PG12"
default "i2c@0"
---help---
Set the SDA pin for the LCD i2c interface. This takes a string in the
format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
config VIDEO_LCD_PANEL_I2C_SCL
string "LCD panel i2c interface SCL pin"
depends on VIDEO_LCD_PANEL_I2C
default "PG10"
---help---
Set the SCL pin for the LCD i2c interface. This takes a string in the
format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
Set the device tree node name for the LCD i2c interface.
# Note only one of these may be selected at a time! But hidden choices are
# not supported by Kconfig

44
board/sunxi/board.c
View file

@ -47,47 +47,6 @@
#include <asm/setup.h>
#include <status_led.h>
#if defined(CONFIG_VIDEO_LCD_PANEL_I2C)
/* So that we can use pin names in Kconfig and sunxi_name_to_gpio() */
int soft_i2c_gpio_sda;
int soft_i2c_gpio_scl;
static int soft_i2c_board_init(void)
{
int ret;
soft_i2c_gpio_sda = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_PANEL_I2C_SDA);
if (soft_i2c_gpio_sda < 0) {
printf("Error invalid soft i2c sda pin: '%s', err %d\n",
CONFIG_VIDEO_LCD_PANEL_I2C_SDA, soft_i2c_gpio_sda);
return soft_i2c_gpio_sda;
}
ret = gpio_request(soft_i2c_gpio_sda, "soft-i2c-sda");
if (ret) {
printf("Error requesting soft i2c sda pin: '%s', err %d\n",
CONFIG_VIDEO_LCD_PANEL_I2C_SDA, ret);
return ret;
}
soft_i2c_gpio_scl = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_PANEL_I2C_SCL);
if (soft_i2c_gpio_scl < 0) {
printf("Error invalid soft i2c scl pin: '%s', err %d\n",
CONFIG_VIDEO_LCD_PANEL_I2C_SCL, soft_i2c_gpio_scl);
return soft_i2c_gpio_scl;
}
ret = gpio_request(soft_i2c_gpio_scl, "soft-i2c-scl");
if (ret) {
printf("Error requesting soft i2c scl pin: '%s', err %d\n",
CONFIG_VIDEO_LCD_PANEL_I2C_SCL, ret);
return ret;
}
return 0;
}
#else
static int soft_i2c_board_init(void) { return 0; }
#endif
DECLARE_GLOBAL_DATA_PTR;
void i2c_init_board(void)
@ -312,8 +271,7 @@ int board_init(void)
#endif
#endif /* CONFIG_DM_MMC */
/* Uses dm gpio code so do this here and not in i2c_init_board() */
return soft_i2c_board_init();
return 0;
}
/*

6
configs/Colombus_defconfig
View file

@ -13,15 +13,9 @@ CONFIG_VIDEO_LCD_DCLK_PHASE=0
CONFIG_VIDEO_LCD_POWER="PH27"
CONFIG_VIDEO_LCD_BL_EN="PM1"
CONFIG_VIDEO_LCD_BL_PWM="PH13"
CONFIG_VIDEO_LCD_PANEL_I2C_SDA="PA23"
CONFIG_VIDEO_LCD_PANEL_I2C_SCL="PA24"
CONFIG_VIDEO_LCD_PANEL_EDP_4_LANE_1620M_VIA_ANX9804=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SYS_I2C_LEGACY=y
CONFIG_SPL_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_SOFT=y
CONFIG_SYS_I2C_SOFT_SPEED=50000
CONFIG_SYS_I2C_SOFT_SLAVE=0x00
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x7f
CONFIG_SYS_I2C_SPEED=400000

3
configs/UTOO_P66_defconfig
View file

@ -21,9 +21,6 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_VIDEO_LCD_TL059WV5C0=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C=y
CONFIG_SYS_I2C_SOFT=y
CONFIG_SYS_I2C_SOFT_SPEED=50000
CONFIG_SYS_I2C_SOFT_SLAVE=0x00
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x7f
CONFIG_SYS_I2C_SPEED=400000

103
drivers/video/anx9804.c
View file

@ -21,18 +21,23 @@
* This function will init an anx9804 parallel lcd to dp bridge chip
* using the passed in parameters.
*
* @i2c_bus: Number of the i2c bus to which the anx9804 is connected.
* @i2c_bus: Device of the i2c bus to which the anx9804 is connected.
* @lanes: Number of displayport lanes to use
* @data_rate: Register value for the bandwidth reg 0x06: 1.62G, 0x0a: 2.7G
* @bpp: Bits per pixel, must be 18 or 24
*/
void anx9804_init(unsigned int i2c_bus, u8 lanes, u8 data_rate, int bpp)
void anx9804_init(struct udevice *i2c_bus, u8 lanes, u8 data_rate, int bpp)
{
unsigned int orig_i2c_bus = i2c_get_bus_num();
u8 c, colordepth;
int i;
struct udevice *chip0, *chip1;
int c, colordepth, i, ret;
i2c_set_bus_num(i2c_bus);
ret = i2c_get_chip(i2c_bus, 0x38, 1, &chip0);
if (ret)
return;
ret = i2c_get_chip(i2c_bus, 0x39, 1, &chip1);
if (ret)
return;
if (bpp == 18)
colordepth = 0x00; /* 6 bit */
@ -40,24 +45,23 @@ void anx9804_init(unsigned int i2c_bus, u8 lanes, u8 data_rate, int bpp)
colordepth = 0x10; /* 8 bit */
/* Reset */
i2c_reg_write(0x39, ANX9804_RST_CTRL_REG, 1);
dm_i2c_reg_write(chip1, ANX9804_RST_CTRL_REG, 1);
mdelay(100);
i2c_reg_write(0x39, ANX9804_RST_CTRL_REG, 0);
dm_i2c_reg_write(chip1, ANX9804_RST_CTRL_REG, 0);
/* Write 0 to the powerdown reg (powerup everything) */
i2c_reg_write(0x39, ANX9804_POWERD_CTRL_REG, 0);
dm_i2c_reg_write(chip1, ANX9804_POWERD_CTRL_REG, 0);
c = i2c_reg_read(0x39, ANX9804_DEV_IDH_REG);
c = dm_i2c_reg_read(chip1, ANX9804_DEV_IDH_REG);
if (c != 0x98) {
printf("Error anx9804 chipid mismatch\n");
i2c_set_bus_num(orig_i2c_bus);
return;
}
for (i = 0; i < 100; i++) {
c = i2c_reg_read(0x38, ANX9804_SYS_CTRL2_REG);
i2c_reg_write(0x38, ANX9804_SYS_CTRL2_REG, c);
c = i2c_reg_read(0x38, ANX9804_SYS_CTRL2_REG);
c = dm_i2c_reg_read(chip0, ANX9804_SYS_CTRL2_REG);
dm_i2c_reg_write(chip0, ANX9804_SYS_CTRL2_REG, c);
c = dm_i2c_reg_read(chip0, ANX9804_SYS_CTRL2_REG);
if ((c & ANX9804_SYS_CTRL2_CHA_STA) == 0)
break;
@ -66,51 +70,51 @@ void anx9804_init(unsigned int i2c_bus, u8 lanes, u8 data_rate, int bpp)
if (i == 100)
printf("Error anx9804 clock is not stable\n");
i2c_reg_write(0x39, ANX9804_VID_CTRL2_REG, colordepth);
dm_i2c_reg_write(chip1, ANX9804_VID_CTRL2_REG, colordepth);
/* Set a bunch of analog related register values */
i2c_reg_write(0x38, ANX9804_PLL_CTRL_REG, 0x07);
i2c_reg_write(0x39, ANX9804_PLL_FILTER_CTRL3, 0x19);
i2c_reg_write(0x39, ANX9804_PLL_CTRL3, 0xd9);
i2c_reg_write(0x39, ANX9804_RST_CTRL2_REG, ANX9804_RST_CTRL2_AC_MODE);
i2c_reg_write(0x39, ANX9804_ANALOG_DEBUG_REG1, 0xf0);
i2c_reg_write(0x39, ANX9804_ANALOG_DEBUG_REG3, 0x99);
i2c_reg_write(0x39, ANX9804_PLL_FILTER_CTRL1, 0x7b);
i2c_reg_write(0x38, ANX9804_LINK_DEBUG_REG, 0x30);
i2c_reg_write(0x39, ANX9804_PLL_FILTER_CTRL, 0x06);
dm_i2c_reg_write(chip0, ANX9804_PLL_CTRL_REG, 0x07);
dm_i2c_reg_write(chip1, ANX9804_PLL_FILTER_CTRL3, 0x19);
dm_i2c_reg_write(chip1, ANX9804_PLL_CTRL3, 0xd9);
dm_i2c_reg_write(chip1, ANX9804_RST_CTRL2_REG, ANX9804_RST_CTRL2_AC_MODE);
dm_i2c_reg_write(chip1, ANX9804_ANALOG_DEBUG_REG1, 0xf0);
dm_i2c_reg_write(chip1, ANX9804_ANALOG_DEBUG_REG3, 0x99);
dm_i2c_reg_write(chip1, ANX9804_PLL_FILTER_CTRL1, 0x7b);
dm_i2c_reg_write(chip0, ANX9804_LINK_DEBUG_REG, 0x30);
dm_i2c_reg_write(chip1, ANX9804_PLL_FILTER_CTRL, 0x06);
/* Force HPD */
i2c_reg_write(0x38, ANX9804_SYS_CTRL3_REG,
ANX9804_SYS_CTRL3_F_HPD | ANX9804_SYS_CTRL3_HPD_CTRL);
dm_i2c_reg_write(chip0, ANX9804_SYS_CTRL3_REG,
ANX9804_SYS_CTRL3_F_HPD | ANX9804_SYS_CTRL3_HPD_CTRL);
/* Power up and configure lanes */
i2c_reg_write(0x38, ANX9804_ANALOG_POWER_DOWN_REG, 0x00);
i2c_reg_write(0x38, ANX9804_TRAINING_LANE0_SET_REG, 0x00);
i2c_reg_write(0x38, ANX9804_TRAINING_LANE1_SET_REG, 0x00);
i2c_reg_write(0x38, ANX9804_TRAINING_LANE2_SET_REG, 0x00);
i2c_reg_write(0x38, ANX9804_TRAINING_LANE3_SET_REG, 0x00);
dm_i2c_reg_write(chip0, ANX9804_ANALOG_POWER_DOWN_REG, 0x00);
dm_i2c_reg_write(chip0, ANX9804_TRAINING_LANE0_SET_REG, 0x00);
dm_i2c_reg_write(chip0, ANX9804_TRAINING_LANE1_SET_REG, 0x00);
dm_i2c_reg_write(chip0, ANX9804_TRAINING_LANE2_SET_REG, 0x00);
dm_i2c_reg_write(chip0, ANX9804_TRAINING_LANE3_SET_REG, 0x00);
/* Reset AUX CH */
i2c_reg_write(0x39, ANX9804_RST_CTRL2_REG,
ANX9804_RST_CTRL2_AC_MODE | ANX9804_RST_CTRL2_AUX);
i2c_reg_write(0x39, ANX9804_RST_CTRL2_REG,
ANX9804_RST_CTRL2_AC_MODE);
dm_i2c_reg_write(chip1, ANX9804_RST_CTRL2_REG,
ANX9804_RST_CTRL2_AC_MODE | ANX9804_RST_CTRL2_AUX);
dm_i2c_reg_write(chip1, ANX9804_RST_CTRL2_REG,
ANX9804_RST_CTRL2_AC_MODE);
/* Powerdown audio and some other unused bits */
i2c_reg_write(0x39, ANX9804_POWERD_CTRL_REG, ANX9804_POWERD_AUDIO);
i2c_reg_write(0x38, ANX9804_HDCP_CONTROL_0_REG, 0x00);
i2c_reg_write(0x38, 0xa7, 0x00);
dm_i2c_reg_write(chip1, ANX9804_POWERD_CTRL_REG, ANX9804_POWERD_AUDIO);
dm_i2c_reg_write(chip0, ANX9804_HDCP_CONTROL_0_REG, 0x00);
dm_i2c_reg_write(chip0, 0xa7, 0x00);
/* Set data-rate / lanes */
i2c_reg_write(0x38, ANX9804_LINK_BW_SET_REG, data_rate);
i2c_reg_write(0x38, ANX9804_LANE_COUNT_SET_REG, lanes);
dm_i2c_reg_write(chip0, ANX9804_LINK_BW_SET_REG, data_rate);
dm_i2c_reg_write(chip0, ANX9804_LANE_COUNT_SET_REG, lanes);
/* Link training */
i2c_reg_write(0x38, ANX9804_LINK_TRAINING_CTRL_REG,
ANX9804_LINK_TRAINING_CTRL_EN);
dm_i2c_reg_write(chip0, ANX9804_LINK_TRAINING_CTRL_REG,
ANX9804_LINK_TRAINING_CTRL_EN);
mdelay(5);
for (i = 0; i < 100; i++) {
c = i2c_reg_read(0x38, ANX9804_LINK_TRAINING_CTRL_REG);
c = dm_i2c_reg_read(chip0, ANX9804_LINK_TRAINING_CTRL_REG);
if ((c & 0x01) == 0)
break;
@ -118,17 +122,14 @@ void anx9804_init(unsigned int i2c_bus, u8 lanes, u8 data_rate, int bpp)
}
if(i == 100) {
printf("Error anx9804 link training timeout\n");
i2c_set_bus_num(orig_i2c_bus);
return;
}
/* Enable */
i2c_reg_write(0x39, ANX9804_VID_CTRL1_REG,
ANX9804_VID_CTRL1_VID_EN | ANX9804_VID_CTRL1_EDGE);
dm_i2c_reg_write(chip1, ANX9804_VID_CTRL1_REG,
ANX9804_VID_CTRL1_VID_EN | ANX9804_VID_CTRL1_EDGE);
/* Force stream valid */
i2c_reg_write(0x38, ANX9804_SYS_CTRL3_REG,
ANX9804_SYS_CTRL3_F_HPD | ANX9804_SYS_CTRL3_HPD_CTRL |
ANX9804_SYS_CTRL3_F_VALID | ANX9804_SYS_CTRL3_VALID_CTRL);
i2c_set_bus_num(orig_i2c_bus);
dm_i2c_reg_write(chip0, ANX9804_SYS_CTRL3_REG,
ANX9804_SYS_CTRL3_F_HPD | ANX9804_SYS_CTRL3_HPD_CTRL |
ANX9804_SYS_CTRL3_F_VALID | ANX9804_SYS_CTRL3_VALID_CTRL);
}

5
drivers/video/anx9804.h
View file

@ -16,9 +16,10 @@
#define ANX9804_DATA_RATE_2700M 0x0a
#ifdef CONFIG_VIDEO_LCD_PANEL_EDP_4_LANE_1620M_VIA_ANX9804
void anx9804_init(unsigned int i2c_bus, u8 lanes, u8 data_rate, int bpp);
void anx9804_init(struct udevice *i2c_bus, u8 lanes, u8 data_rate, int bpp);
#else
static inline void anx9804_init(unsigned int i2c_bus, u8 lanes, u8 data_rate,
static inline void anx9804_init(struct udevice *i2c_bus, u8 lanes, u8 data_rate,
int bpp) {}
#endif
#endif

55
drivers/video/sunxi/sunxi_display.c
View file

@ -901,6 +901,42 @@ static int sunxi_ssd2828_init(const struct ctfb_res_modes *mode)
}
#endif /* CONFIG_VIDEO_LCD_SSD2828 */
#ifdef CONFIG_VIDEO_LCD_PANEL_I2C
static void sunxi_panel_i2c_init(struct sunxi_display_priv *sunxi_display)
{
const char *name = CONFIG_VIDEO_LCD_PANEL_I2C_NAME;
struct udevice *i2c_bus;
int ret;
ret = uclass_get_device_by_name(UCLASS_I2C, name, &i2c_bus);
if (ret)
return;
if (IS_ENABLED(CONFIG_VIDEO_LCD_PANEL_EDP_4_LANE_1620M_VIA_ANX9804)) {
/*
* The anx9804 needs 1.8V from eldo3, we do this here
* and not via CONFIG_AXP_ELDO3_VOLT from board_init()
* to avoid turning this on when using hdmi output.
*/
axp_set_eldo(3, 1800);
anx9804_init(i2c_bus, 4,
ANX9804_DATA_RATE_1620M,
sunxi_display->depth);
}
if (IS_ENABLED(CONFIG_VIDEO_LCD_TL059WV5C0)) {
struct udevice *chip;
ret = i2c_get_chip(i2c_bus, 0x5c, 1, &chip);
if (ret)
return;
dm_i2c_reg_write(chip, 0x04, 0x42); /* Turn on the LCD */
}
}
#else
static void sunxi_panel_i2c_init(struct sunxi_display_priv *sunxi_display) {}
#endif
static void sunxi_engines_init(void)
{
sunxi_composer_init();
@ -935,27 +971,12 @@ static void sunxi_mode_set(struct sunxi_display_priv *sunxi_display,
break;
case sunxi_monitor_lcd:
sunxi_lcdc_panel_enable();
if (IS_ENABLED(CONFIG_VIDEO_LCD_PANEL_EDP_4_LANE_1620M_VIA_ANX9804)) {
/*
* The anx9804 needs 1.8V from eldo3, we do this here
* and not via CONFIG_AXP_ELDO3_VOLT from board_init()
* to avoid turning this on when using hdmi output.
*/
axp_set_eldo(3, 1800);
anx9804_init(CONFIG_VIDEO_LCD_I2C_BUS, 4,
ANX9804_DATA_RATE_1620M,
sunxi_display->depth);
}
if (IS_ENABLED(CONFIG_VIDEO_LCD_HITACHI_TX18D42VM)) {
mdelay(50); /* Wait for lcd controller power on */
hitachi_tx18d42vm_init();
}
if (IS_ENABLED(CONFIG_VIDEO_LCD_TL059WV5C0)) {
unsigned int orig_i2c_bus = i2c_get_bus_num();
i2c_set_bus_num(CONFIG_VIDEO_LCD_I2C_BUS);
i2c_reg_write(0x5c, 0x04, 0x42); /* Turn on the LCD */
i2c_set_bus_num(orig_i2c_bus);
}
if (IS_ENABLED(CONFIG_VIDEO_LCD_PANEL_I2C))
sunxi_panel_i2c_init(sunxi_display);
sunxi_composer_mode_set(mode, address, monitor);
sunxi_lcdc_tcon0_mode_set(sunxi_display, mode, false);
sunxi_composer_enable();

17
include/configs/sunxi-common.h
View file

@ -160,23 +160,6 @@
#define CONFIG_SPL_PAD_TO 32768 /* decimal for 'dd' */
#endif
/* I2C */
#if defined(CONFIG_VIDEO_LCD_PANEL_I2C)
/* We use pin names in Kconfig and sunxi_name_to_gpio() */
#define CONFIG_SOFT_I2C_GPIO_SDA soft_i2c_gpio_sda
#define CONFIG_SOFT_I2C_GPIO_SCL soft_i2c_gpio_scl
#ifndef __ASSEMBLY__
extern int soft_i2c_gpio_sda;
extern int soft_i2c_gpio_scl;
#endif
#define CONFIG_VIDEO_LCD_I2C_BUS 0 /* The lcd panel soft i2c is bus 0 */
#define CONFIG_SYS_SPD_BUS_NUM 1 /* And the axp209 i2c bus is bus 1 */
#else
#define CONFIG_SYS_SPD_BUS_NUM 0 /* The axp209 i2c bus is bus 0 */
#define CONFIG_VIDEO_LCD_I2C_BUS -1 /* NA, but necessary to compile */
#endif
/* Ethernet support */
#ifdef CONFIG_USB_EHCI_HCD