Commit graph

14889 commits

Author SHA1 Message Date
Michal Simek
530560b6f8 xilinx: fru: Replace spaces with \0 in detected name
FRU spec expected \0 for unused symbols but unfortunately a lot of boards
are using spaces instead of \0. That's why after saving it to desc->name
name is checked again and all spaces are converted to \0. This will ensure
that names can be used for string manipulations like concatenation.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-08-26 08:14:42 +02:00
Michal Simek
afb08a8634 xilinx: zynqmp: Add debug messages for boot mode
Add debug messages to see HW boot mode and also alternative boot mode in
logs directly.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-08-26 08:08:11 +02:00
T Karthik Reddy
80c0d38a56 xilinx: common: Add function to print SoC info
Add print_cpuinfo() to print SoC info like family & revision.
This function depends on CONFIG_DISPLAY_CPUINFO config.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Reviewed-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-08-26 08:08:11 +02:00
Ashok Reddy Soma
655d69faaf mmc: zynq_sdhci: Move setting tapdelay code to driver
Move tapdelay function calls to zynq_sdhci.c and make them static
inline. zynqmp_tap_delay.h has function prototypes for the functions
defined in tap_delays.c, which will not be needed anymore.

Remove tap_delays.c and zynqmp_tap_delay.h files.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-08-26 08:08:01 +02:00
Ashok Reddy Soma
d044982555 mmc: zynq_sdhci: Add xilinx_pm_request() method to set tapdelays
Currently xilinx sdhci driver is using zynqmp_mmio_write() to set
tapdelay values and DLL resets. Continue to use this for SPL and mini
U-Boot where U-Boot will be executed at EL3 level.

Use firmware call xilinx_pm_request() using appropriate arguments to
set input/output tapdelays and also for DLL resets in regular flow(EL2).

Host driver should explicitly request DLL reset before ITAP (assert DLL)
and after OTAP (release DLL) to avoid issues in some cases. Also handle
error return where possible.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-08-26 08:07:46 +02:00
Tom Rini
7bfa565453 Merge branch 'next-socfpga' of https://github.com/tienfong/uboot_mainline 2021-08-25 08:23:42 -04:00
Siew Chin Lim
d1b2e4bd29 board: intel: Add socdk board support for Intel N5X device
Add N5X SoC devkit board.

Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
2021-08-25 14:50:50 +08:00
Tom Rini
18f4e85876 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq
fsl-qoriq: Fixes related to env, spi, usb, crypto, configs, distro-boot
for Layerscape Boards like lx2, sl28, ls2088ardb.
powerpc: Fixes for t208xrdb revd board and cortina related configs
update for T208xRDB, T4240RDB.
2021-08-23 09:17:32 -04:00
Tom Rini
79d389a548 Merge https://source.denx.de/u-boot/custodians/u-boot-riscv 2021-08-19 08:23:01 -04:00
Kuldeep Singh
3bd5ea566e board: T4240rdb: Extend cs4340_get_fw_addr() functionality
T4240RDB supports booting from 2 nor banks(default and altbank). The
corresponding defconfig can only have one entry defined and therefore,
extend cs4340_get_fw_addr() function to overwrite firmware address which
will be later used in cortina firmware.

Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-08-18 15:55:15 +05:30
Kuldeep Singh
8ae83cc5af board: t208x: Extend cs4340_get_fw_addr() functionality
T2080RDB supports booting from 2 nor banks(default and altbank). The
corresponding defconfig can only have one entry defined and therefore,
extend cs4340_get_fw_addr() function to overwrite firmware address which
will be later used in cortina firmware.

Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-08-18 15:55:15 +05:30
Kuldeep Singh
961928397f board: ls2088ardb: Extend cs4340_get_fw_addr() functionality
LS2088A-RDB supports TFA boot source and has 2 nor banks(default and
altbank) and QSPI as boot source. The corresponding defconfig can only
have one entry defined and therefore, extend cs4340_get_fw_addr()
function to overwrite firmware address which will be later used in
cortina firmware.

Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-08-18 15:55:15 +05:30
Kshitiz Varshney
0dfa9da277 board: fsl_validate: Fix resource leak issue
Free dynamically allocated memory before every return statement
in calc_img_key_hash() and calc_esbchdr_esbc_hash() function.
Verified the secure boot changes using ls1046afrwy board.

Signed-off-by: Kshitiz Varshney <kshitiz.varshney@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-08-18 15:55:15 +05:30
Camelia Groza
6466b95e7c board: freescale: t208xrdb: enable Power-On Reset for rev D boards
Starting with board revision D, the MISCCSR CPLD register needs to be
configured to enable Power-on Reset for software reset commands.

Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-08-18 15:55:15 +05:30
Zong Li
47d73ba4f4 board: sifive: overwrite board_fdt_blob_setup in u-boot proper
Add board_fdt_blob_setup to return the device tree location which is
passed by prior stage in u-boot proper. The generic board_fdt_blob_setup
always returns _end, it mignt be ok because u-boot SPL would currently
put the dtb there, but it would be broken if we put the dtb to another
place and assigned the location into a1 register for u-boot proper. Use
the location passed by prior stage would make more sence, because we
actually pass the location to u-boot proper and want to use that one,
rather than the dtb which in _end.

We can't use CONFIG_OF_PRIOR_STAGE because it doens't distinguish the
implementation of u-boot SPL and u-boot proper, so u-boot SPL need to
reply on the prior stage to pass device tree location as well, but we
don't pass the DT from boot rom now. In addition, when
CONFIG_OF_PRIOR_STAGE is enabled, the u-boot-spl.bin and u-boot.itb won't
include the device tree.

Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-08-17 19:28:37 +08:00
Zong Li
87e8481885 board: sifive: compile stuff only related to SPL in SPL build
As (3581811dc2 "riscv: sifive/fu540: Move SPL related functions to spl.c"),
we put the SPL stuff in spl.c, we don't need to compile unleashed.c and
unmatched.c in SPL build.

Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-08-17 19:28:37 +08:00
Marcel Ziswiler
5e39e20a1a board: apalis-tk1: launch toradex easy installer in usb recovery
The USB recovery mode is used by Toradex to load the Toradex Easy
Installer image which supports further system images installation.
Prepare for loading and launching the Toradex Easy Installer if the
USB Recovery mode is activated.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2021-08-16 12:17:07 -07:00
Patrick Delaunay
b73e8bf453 arm: stm32mp: add defconfig for trusted boot with FIP
Add TF-A FIP support for trusted boot on STM32MP15x,
when STM32MP15x_STM32IMAGE is not activated.

With FIP support the SSBL partition is named "fip" and its size is 4MB,
so the ENV partition name in device tree  (for SD card or eMMC)
or offset in defconfig (CONFIG_ENV_OFFSET / CONFIG_ENV_OFFSET_REDUND)
need to be modified.

With FIP the TEE MTD partitions are removed because the OP-TEE binray are
included in the FIP containers.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-08-16 09:36:31 +02:00
Patrick Delaunay
6de57b41dd arm: stm32mp: add config for STM32IMAGE support
By default for trusted boot with TF-A, U-Boot (u-boot-nodtb)
is located in FIP container with its device tree and with
the secure monitor (provided by TF-A or OP-TEE).
The FIP file is loaded by TF-A BL2 and each components is
extracted at the final location.

This patch add CONFIG_STM32MP15x_STM32IMAGE to request the
STM32 image generation for SOC STM32MP15x
when FIP container is not used (u-boot.stm32 is loaded by TF-A
as done previously to keep the backward compatibility).

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-08-16 09:34:27 +02:00
Tom Rini
a25277122d Merge https://source.denx.de/u-boot/custodians/u-boot-cfi-flash
- Some CFI flash related fixups (Kconfig & header) (Bin)
- Enable CFI flash support on the QEMU RISC-V virt machine. (Bin)
2021-08-11 08:31:56 -04:00
Tom Rini
4dc1a5c248 Merge https://source.denx.de/u-boot/custodians/u-boot-marvell
- Convert GoFlex Home Ethernet and SATA to Driver Model (Tony)
- mvebu: Automatically detect CONFIG_SYS_TCLK (Pavel)
- mvebu: sata_mv: Fix HDD identication during cold start (Tony)
- a37xx: pci: Fix handling PIO config error responses (Pavel)
- Other minor misc changes and board maintainer updates
2021-08-11 08:31:25 -04:00
Tom Rini
aba3fa1d3f - odroid-n2: fix fdtfile suffix for n2-plus
- sei610 & meson64_android cleanups to prepare android 11 boot support
 - use Android BCB mechanism for reboot reason instead of HW reboot flag
 - Switch meson64_android boot flow to use abootimg for A/B, AVB and DTBO support
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAmESPjcACgkQd9zb2sjI
 SdFabg/+K/5kH01N6etPpPgNH3DTns3Z7Uv16rawGaFJVj4V2O/Ak2vmhvjJA4df
 KvLJL3AVolMOfD4xTABRDyLKt3maCgIYkamdBWBV/xKCTKL7fvvqj8V1U5iUsGKm
 Wl2KbbDj+dGNF+IYO9V4T1D/JaRjAUk4YeztFEDaNdP3P1N+01v2FyfkadBL5un3
 dqwHb3DMNS2SyjnE3glTAs3g/+3nmrHhAHiVVZQlJHsijuup6f93e8huKQ4v1oFX
 xsNzeI9j6jGBvVI6hRsHNLOZzhj8/ZcSntdlL+b4FbY++KzrKidMgVECc486cc8t
 IEq/iJHggYhwRtw3EAYblmMVFiQeo07hgSbbSP8mIJWARtqh439tLUyKxW3y/5UT
 UlGLHcsSSwv/5NhY8ugGAYeaGGXNpMMc5ISbssnn5FB6VHSox4nRZai5U9jKoyc2
 iBNNdyLiLi/Fz9YMWj8SAibajT8bchWu1qW2n85nFb3xWQpXcbjzlglnLY6bX3TQ
 1d5ehInNK8deptHNh2eGBsPKOUJ/gDTvEey+6J517hbJ59My96v+dvmbtG7kH9Z8
 157KQzjvHH4X9MDW8wYb381TV8kcNi3b16QPP2RKxuK1Zrve0RLPhOAz/YeSkTDN
 mavHlaY7JvUXjAct0K5VXHvA9U6DBrvc3eb7KoXL4b4+SHr/4UQ=
 =RZ8+
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20210810' of https://source.denx.de/u-boot/custodians/u-boot-amlogic

- odroid-n2: fix fdtfile suffix for n2-plus
- sei610 & meson64_android cleanups to prepare android 11 boot support
- use Android BCB mechanism for reboot reason instead of HW reboot flag
- Switch meson64_android boot flow to use abootimg for A/B, AVB and DTBO support
2021-08-11 08:31:13 -04:00
Bin Meng
d248627f9d riscv: qemu: Enable MTD NOR flash support
Enable support to the 2 NOR flashes on the QEMU RISC-V virt machine.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-08-11 10:36:10 +02:00
Tony Dinh
e21c74f24b arm: kirkwood: Goflex Home: Update board maintainer
Change maintainer to me. Suriyan no longer has this board and wishes
to see someone maintaining it actively.

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-08-11 08:42:26 +02:00
Tony Dinh
9176f4fa98 arm: kirkwood: Dockstar: Update board maintainer
Change maintainer to me. Eric no longer has this board and wishes
to see someone maintaining it actively.

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-08-11 08:42:26 +02:00
Tony Dinh
293a8de6fa arm: kirkwood: GoFlex Home: Use Ethernet PHY name and address from device tree
In DM Ethernet, the old "egiga0" name is no longer valid,
so replace these with Ethernet PHY names from device tree. Also, read
Ethernet PHY address from device tree.

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-08-11 08:42:26 +02:00
Christian Hewitt
480aeb0aa7 board: amlogic: odroid-n2: fix fdtfile suffix for n2-plus
The N2+ dtb is meson-g12b-odroid-n2-plus.dtb, not n2_plus, so
correct the suffix provided in the board file. Also align the
board ident string shown during boot to match.

Fixes: 8bc780106c ("board: amlogic: odroid: add runtime detection of the N2/N2+/C4/HC4 variants")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-08-10 10:43:40 +02:00
Tom Rini
4da98ee1dd u-boot-imx-20210809
- new SOC: add support for imx8ulp
 - Toradex fixes for colibri (vf / imx6 / imx7 / imx8x)
 - convert to DM for mx28evk
 - Fixes for Gateworks ventana boards
 
 CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/8639
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCYREkvA8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76ZZSACfbb5qAnq5hQXYRhn9v0OjMahWF10An1xxwyDt
 I84Bklv/7yreWz82Gb2J
 =Qp7m
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20210809' of https://source.denx.de/u-boot/custodians/u-boot-imx

u-boot-imx-20210809

- new SOC: add support for imx8ulp
- Toradex fixes for colibri (vf / imx6 / imx7 / imx8x)
- convert to DM for mx28evk
- Fixes for Gateworks ventana boards

CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/8639
2021-08-09 09:27:26 -04:00
Peng Fan
3f2b4d7220 arm: imx: add i.MX8ULP EVK support
Add i.MX8ULP EVK basic support, support SD/I2C/ENET/LPUART

Log as below: I would keep some debug info for now, and after we move
to be stable and production launch, we could drop that.

U-Boot SPL 2021.07-rc4-00164-gb800e19a6b (Jun 29 2021 - 10:23:30 +0800)
Normal Boot
upower_init: soc_id=48
upower_init: version:11.11.6
upower_init: start uPower RAM service
user_upwr_rdy_callb: soc=b
user_upwr_rdy_callb: RAM version:12.6
Turn on switches ok
Turn on memories ok
Clear DDR retention ok
Poll for freq_chg_req on SIM register and change to F1 frequency.
Poll for freq_chg_req on SIM register and change to F0 frequency.
Poll for freq_chg_req on SIM register and change to F1 frequency.
Poll for freq_chg_req on SIM register and change to F2 frequency.
Poll for freq_chg_req on SIM register and change to F1 frequency.
Poll for freq_chg_req on SIM register and change to F2 frequency.
complete
De-Skew PLL is locked and ready
WDT:   Not found!
Trying to boot from BOOTROM
image offset 0x8000, pagesize 0x200, ivt offset 0x0
Load image from 0x3a800 by ROM_API
NOTICE:  BL31: v2.4(release):imx_5.10.35_2.0.0_imx8ulp_er-10-gf37e59b94
NOTICE:  BL31: Built : 01:56:58, Jun 29 2021
NOTICE:  upower_init: start uPower RAM service
NOTICE:  user_upwr_rdy_callb: soc=b
NOTICE:  user_upwr_rdy_callb: RAM version:12.6

U-Boot 2021.07-rc4-00164-gb800e19a6b (Jun 29 2021 - 10:23:30 +0800)

CPU:   Freescale i.MX8ULP rev1.0 at 744 MHz
Reset cause: POR
Boot mode: Single boot
Model: FSL i.MX8ULP EVK
DRAM:  2 GiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 2
Loading Environment from MMC... ***
Warning - bad CRC, using default environment

In:    serial@293a0000
Out:   serial@293a0000
Err:   serial@293a0000
Net:
Warning: ethernet@29950000 (eth0) using random MAC address -
96:35:88:62:e0:44
eth0: ethernet@29950000
Hit any key to stop autoboot:  0

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09 14:46:51 +02:00
Tim Harvey
2eb85647c0 board: gateworks: venice: add board model to dt
Add the specific board model from EEPROM config to the device-tree to
make it easier to access from Linux userspace.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09 14:46:50 +02:00
Fabio Estevam
1d1f3c8099 mx28evk: Convert to driver model
Make the conversion to driver model as it is mandatory.

Successfully tested booting Linux from the SD card.

Dropped support for networking and splash screen as these need
to be properly converted to DM and tested.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
2021-08-09 14:46:50 +02:00
Tim Harvey
a8a72c3ce9 board: gateworks: venice: add imx8mm-gw7902 support
The GW7902 is based on the i.MX 8M Mini / Nano SoC featuring:
- LPDDR4 DRAM
- eMMC FLASH
- Gateworks System Controller
- LTE CAT M1 modem
- USB 2.0 HUB
- M.2 Socket with USB2.0, PCIe, and dual-SIM
- IMX8M FEC
- PCIe based GbE
- RS232/RS485/RS422 serial transceiver
- GPS
- CAN bus
- WiFi / Bluetooth
- MIPI header (DSI/CSI/GPIO/PWM/I2S)
- PMIC

Do the following to add support for it:
- add dts
- add PMIC config

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09 14:46:50 +02:00
Tim Harvey
57d27aa917 board: gateworks: venice: add board model/serial# to env
Add board model/serial# strings to env. Move the creation of the strings
to gsc_read() and the display of the info into gsc_info() so they are
available to U-Boot proper.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09 14:46:50 +02:00
Tim Harvey
67c6d03620 board: gateworks: venice: use bus numbers vs names
replace looking up i2c bus name by bus number and define bus numbers and
eeprom address with #defines.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09 14:46:50 +02:00
Tim Harvey
692c25ee30 board: gateworks: venice: get mem size from dt
Get mem size from dt which SPL updated per EEPROM config.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09 14:46:50 +02:00
Fabio Estevam
82679f94e7 warp: Use the correct symbol for CONFIG_IMX_HAB
The intention of commit d714a75fd4 ("imx: replace CONFIG_SECURE_BOOT
with CONFIG_IMX_HAB") was to convert from CONFIG_SECURE_BOOT to
CONFIG_IMX_HAB, but it replaced with an extra "_" character.

Fix it by using the correct CONFIG_IMX_HAB symbol.

Fixes: d714a75fd4 ("imx: replace CONFIG_SECURE_BOOT with CONFIG_IMX_HAB")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
2021-08-09 14:46:50 +02:00
Tim Harvey
249ee657e6 imx: ventana: add support for GW54xx-G revision
The GW54xx-G revision has the foolowing changes:
 - replaces the EOL GbE PHY with an updated part (requires an enable pin)
 - replaces the EOL analog video decoder with an updated part
   (requires dt prop)
 - add power control to miniPCIe socket

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09 14:46:50 +02:00
Tim Harvey
bf6bdefd36 imx: ventana: add support for GW53xx-G revision
The GW53xx-G revision has the foolowing changes:
 - replaces the EOL GbE PHY with an updated part (requires an enable pin)
 - replaces the EOL analog video decoder with an updated part
   (requires dt prop)
 - add power control to miniPCIe socket

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09 14:46:50 +02:00
Tim Harvey
3ef59acdaf imx: ventana: add GW5913 support
The GW5913 is a Single Board Computer based on the NXP i.MX6Q/DL SoC
with the following features:
 - DDR3 DRAM
 - NAND FLASH (256MiB or 2048MiB)
 - Gateworks System Periperhal Controller
 - front panel LED's
 - front panel pushbutton
 - Digital I/O connector (I2C/GPIO/UART)
 - u-blox Zoe-M8Q GPS
 - 1x RJ45 GbE
 - 1x MiniPCIe socket with PCIe USB 2.0 and nanoSIM socket
 - Passive PoE and wide-range DC power supply

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09 14:46:50 +02:00
Tim Harvey
744d21c126 imx: ventana: add GW5912 support
The GW5912 is a Single Board Computer based on the NXP i.MX6Q/DL SoC
with the following features:
 - DDR3 DRAM
 - NAND FLASH (256MiB or 2048MiB)
 - microSD socket
 - Gateworks System Periperhal Controller
 - front panel LED's
 - front panel pushbutton
 - RS232 connector (2x UARTs)
 - CAN/RS485 connector
 - Digital I/O connector (I2C/GPIO)
 - SPI connector
 - u-blox Zoe-M8Q GPS
 - LIS2DE12 Accellerometer
 - 1x FEC GbE RJ45 with 802.3at Active PoE
 - 1x PCI GbE RJ45 with Passive PoE
 - 5x MiniPCIe socket with PCIe/USB 2.0
 - 1x MiniPCIe socket with PCIe/USB 2.0 and SIM socket
 - Aux power input with wide-range DC power supply

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09 14:46:50 +02:00
Tim Harvey
25805401ff imx: ventana: add GW5910 support
The GW5910 is a Single Board Computer based on the NXP i.MX6Q/DL SoC
with the following features:
 - DDR3 DRAM
 - NAND FLASH (256MiB or 2048MiB)
 - microSD socket
 - Gateworks System Periperhal Controller
 - front panel LED's
 - front panel pushbutton
 - RS232 connector (2x UARTs)
 - Digital I/O connector (I2C/GPIO)
 - SPI connector
 - u-blox Zoe-M8Q GPS
 - LIS2DE12 Accellerometer
 - TI CC1352 ARM Cortex-M4 multiprotocol sub-1GHz / 2.4GHz wireless MCU
 - On-board brcmfmac WiFi and BT module
 - RGMII RJ45 GbE
 - 1x MiniPCIe socket with PCIe/USB 2.0
 - 1x MiniPCIe socket with USB 2.0 and nanoSIM socket
 - Passive PoE and wide-range DC power supply

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09 14:46:50 +02:00
Tim Harvey
2d02586028 imx: ventana: use dt for hwmon
Use dt-bindings for GSC hwmon devices.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09 14:46:50 +02:00
Tim Harvey
49b4efe621 imx: ventana: remove hard-coded flexcan standby pin
Flexcan pinmux is configured in kernel dt.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09 14:46:50 +02:00
Tim Harvey
395f17d0ea imx: ventana: remove hard-coded analog video codec enable
Analog video codec enable is configured in kernel dt.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09 14:46:50 +02:00
Tim Harvey
a194e6ed45 imx: ventana: remove hard-coded USB OTG pinmux
pinmux is now done via dt. Add missing OTG_OC pinmux for boards that
use it.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09 14:46:50 +02:00
Tim Harvey
aa85d251db imx: ventana: remove hard-coded PCI reset
PCIe reset configuration is handled via dt now.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09 14:46:50 +02:00
Tim Harvey
034105a8f7 imx: ventana: remove hard-coded USB HUBRST# gpio config
The USB HUB reset is handled via dt now.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09 14:46:50 +02:00
Tim Harvey
92309aacda imx: ventana: replace hard-coded LED config with dt based config
Use device-tree LED config instead of hard-coded board-specific config.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09 14:46:50 +02:00
Tim Harvey
706d910bbc imx: ventana: remove nand field from common ventana struct
NAND fdt fixups can be performed without knowing if NAND is present.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09 14:46:50 +02:00
Tim Harvey
45c902c434 imx: ventana: move wdog/uhs-i board/revision dt fixups
Move board/revision specific dt fixups for WDOG and UHS-I features
so that we can call them early for U-Boot control dt as well.

Additionally drop a deprected non-mainline dt-prop fixup regarding
HDMI input format.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09 14:46:50 +02:00
Tim Harvey
36de64f2eb imx: ventana: ignore EEPROM config when checking for NAND support
EEPROM bits no longer indicate support for NAND so instead use
hard-coded value from board config struct.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09 14:46:50 +02:00
Oleksandr Suvorov
d9275ebbff board: colibri_vf: fix compiling warning
This patch fixes the following compiler warning:
=============
board/toradex/colibri_vf/colibri_vf.c: In function 'ft_board_setup':
board/toradex/colibri_vf/colibri_vf.c:436:6: warning: unused variable 'ret' [-Wunused-variable]
=============

Fixes: be3f1a56bf ("video: fsl_dcu_fb: add DM_VIDEO support")
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2021-08-09 13:09:29 +02:00
Ming Liu
87421ab644 board: colibri_imx6: add board_fit_config_name_match to support FIT in SPL
Only one dtb is currently supported, so match with imx6-colibri.

Signed-off-by: Ming Liu <ming.liu@toradex.com>
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2021-08-09 13:09:29 +02:00
Stefan Agner
421440f70d board: toradex: make USB PID from config block optional
If config block support is enabled, USB gadget modes unconditionally
use Toradex Product ID as USB PID. Some applications might prefer a
different and/or static USB PID. Add a Kconfig configuration option
to descide whether to use USB PID from config block or the fallback
config option CONFIG_G_DNL_PRODUCT_NUM.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2021-08-09 13:09:29 +02:00
Stefan Agner
46307ef01e board: colibri_imx7: use SDP if USB serial downloader has been used
In case USB serial downloader has been used to load U-Boot start the
serial download protocol (SDP) emulation. This allows to download
complete images such as Toradex Easy Installer over USB SDP as well.
This code uses the boot ROM provided boot information to reliably
detect USB serial downloader.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2021-08-09 13:09:29 +02:00
Marek Vasut
d2d9ecb88e ARM: renesas: Mallocate bootparams on Gen3
The bootparams do not have to be at fixed location, they can be
dynamically mallocated instead. Make it so to get rid of another
fixed assignment.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Biju Das <biju.das.jz@bp.renesas.com>
Cc: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
2021-08-08 12:27:04 +02:00
Simon Glass
666671ecc3 ppc: Drop idt8t49n222a_serdes_clk driver
This is not used. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-06 08:26:48 -04:00
Simon Glass
23cd8a63a0 pci: Drop pci_init_board()
With the conversion to driver model, this is not needed now. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-06 08:26:48 -04:00
Michal Simek
b86f43de0b xilinx: zynqmp: Add support for runtime dfu_alt_info setup
The main reason for this to be implemented is capsule update.
Two memories are supported and tested which is MMC FAT based and QSPI
based.

For creating capsule these commands are used:
./tools/mkeficapsule --raw spl/boot.bin --index 1 capsule1.bin
./tools/mkeficapsule --raw u-boot.itb --index 2 capsule2.bin

Then transfer to SD card where these commands run:
load mmc 0 10000000 capsule1.bin
efidebug capsule update -v 10000000
load mmc 0 10000000 capsule2.bin
efidebug capsule update -v 10000000

Depends on the boot device used are binaries loaded to qspi or mmc fat
partition.
Also multiboot register is handled to make sure that the same location(id)
is used as image which is upgraded.

Two locations are used by purpose for SPL flow. If only boot.bin is used
create only one capsule.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-08-06 09:32:02 +02:00
Michal Simek
3d238435b2 xilinx: zynqmp: use zynqmp_mmio_read() in multi_boot()
When U-Boot runs in EL2 there is no access to csu_base registers that's why
this has to be done via firmware interface to find out multi boot register
value. Till now this function is called only from SPL in EL3.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-08-06 09:32:02 +02:00
Michal Simek
e49f2a7f85 xilinx: zynqmp: Change multi_boot() to return value
Change multi_boot() to return multiboot value and move print out of this
function and let this function to be used by other functions without
duplicating message.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-08-06 09:32:02 +02:00
Michal Simek
f83cfaa7f2 xilinx: zynqmp: Free allocated field for target variable
When env_set() is called there is no need to allocate memory for variable
which is already saved that's why free it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-08-06 09:32:02 +02:00
Simon Glass
0ecc7a0cbf ppc: socrates: Drop use of DM_PCI
Now that DM_PCI is always enabled we don't need to check it. Drop this
old code.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-05 19:46:35 -04:00
Simon Glass
d76415c251 ppc: malta: Drop use of DM_PCI
Now that DM_PCI is always enabled we don't need to check it. Drop this
old code.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-05 19:46:35 -04:00
Simon Glass
97229af027 pci: freescale: Drop old code
Drop this old pre-driver model code.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-05 16:14:36 -04:00
Tom Rini
b91c704333 Merge https://source.denx.de/u-boot/custodians/u-boot-samsung 2021-08-03 09:07:01 -04:00
Simon Glass
0b1284eb52 global: Convert simple_strtoul() with decimal to dectoul()
It is a pain to have to specify the value 10 in each call. Add a new
dectoul() function and update the code to use it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-02 13:32:14 -04:00
Simon Glass
7e5f460ec4 global: Convert simple_strtoul() with hex to hextoul()
It is a pain to have to specify the value 16 in each call. Add a new
hextoul() function and update the code to use it.

Add a proper comment to simple_strtoul() while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-02 13:32:14 -04:00
Tom Rini
5371593aed Merge https://source.denx.de/u-boot/custodians/u-boot-sunxi
- Move the PSCI runtime code for H3/A23/A33 into SRAM
- Pick the environment from the actual MMC boot device (SD card vs.
  eMMC)
- Plus a small improvement from Icenowy, just for good measure.
2021-07-31 20:51:24 -04:00
Samuel Holland
1011ebc72b sunxi: Select environment MMC based on boot device
Currently, the environment is always stored in eMMC if eMMC is enabled
in the config. This means images written to SD and eMMC will cross-
contaminate their environments unless the configuration is changed.

By dropping the device number from the environment location string and
implementing mmc_get_env_dev, we will always use the environment from
the boot device when booting from SD/eMMC.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-01 00:11:34 +01:00
Tony Dinh
ad2ec5d728 arm: kirkwood: Dreamplug: Use Ethernet PHY name and address from device tree
In DM Ethernet, the old "egiga0" and 'egiga1" names are no longer valid,
so replace these with Ethernet PHY names from device tree. Also, read
Ethernet PHY address for each port from device tree.

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-31 09:59:58 +02:00
Pali Rohár
40afc069b3 arm: mvebu: gdsys: Remove custom spl_board_init()
The gdsys a38x config file (controlcenterdc_defconfig) uses BootROM to
load U-Boot proper.

Since it is now possible to do this via U-Boot SPL framework, we do not
need to provide custom spl_board_init() which calls return_to_bootrom().

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-31 09:59:58 +02:00
Pali Rohár
2226ca1734 arm: mvebu: Load U-Boot proper binary in SPL code based on kwbimage header
Now that proper load and execution addresses are set in v1 kwbimage we
can use it for loading and booting U-Boot proper.

Use the new spl_parse_board_header() function to implement parsing the
kwbimage v1 header. Use information from this header to locate offset and
size of the U-Boot proper binary, instead of using the legacy U-Boot
header which is prepended to the U-Boot proper binary stored at fixed
offset. This has the advantage that we do not need to relay on legacy
U-Boot header anymore and therefore U-Boot proper binary can be stored at
any offset, as is the case when loading & booting U-Boot proper by
BootROM. The CONFIG_SYS_U_BOOT_OFFS option is therefore not used by SPL
code anymore.

Also allow to compile U-Boot SPL without CONFIG_SPL_SPI_FLASH_SUPPORT,
CONFIG_SPL_MMC_SUPPORT or CONFIG_SPL_SATA_SUPPORT set. In this case
BootROM is used for loading and executing U-Boot proper. This reduces the
size of U-Boot's SPL image. By default these config options are enabled
and so BootROM loading is not used. In some cases BootROM reads from SPI
NOR at lower speed than U-Boot SPL. So people can decide whether they
want to have smaller SPL binary at the cost of slower boot.

Therefore dependency on CONFIG_SPL_DM_SPI, CONFIG_SPL_SPI_FLASH_SUPPORT,
CONFIG_SPL_SPI_LOAD, CONFIG_SPL_SPI_SUPPORT, CONFIG_SPL_DM_GPIO,
CONFIG_SPL_DM_MMC, CONFIG_SPL_GPIO_SUPPORT, CONFIG_SPL_LIBDISK_SUPPORT,
CONFIG_SPL_MMC_SUPPORT, CONFIG_SPL_SATA_SUPPORT and
CONFIG_SPL_LIBDISK_SUPPORT is changed from strict to related "imply"
(which can be selectivelly turned off and causes booting via BootROM).

Options CONFIG_SYS_SPI_U_BOOT_OFFS,
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR and
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET have to to be set to
zero as they define the location where kwbimage header starts. It is the
location where BootROM expects start of the kwbimage from which it reads,
parses and executes SPL part. The same applies to option
CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR, which has to be set to one.

Update all config files to set correct values of these options and set
CONFIG_SYS_U_BOOT_OFFS to the correct value - the offset where U-Boot
proper starts.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-31 09:59:58 +02:00
Tom Rini
15f7e0dc01 Merge branch '2021-07-28-assorted-fixes'
- Assorted bugfixes
2021-07-29 12:10:55 -04:00
Tom Rini
38436abd5e Merge tag 'ti-v2021.10-rc2' of https://source.denx.de/u-boot/custodians/u-boot-ti
- Add MMC High speed modes for AM64 and J7200
- Add Sierra/Torrent SERDES driver
- Minor clean-ups for R5F boot from SPL
2021-07-29 08:20:06 -04:00
Suman Anna
a6c64d255e board: ti: k2g: Program PadConfig_202 before locking RSTMUX8
The PADCONFIG_202 register (0x02621328) is affected by the locking
of the RSTMUX8 register (0x02620328), and so cannot be configured
in kernel. This has been confirmed as a hardware bug and affects
all K2G SoCs.

Setup the pinmux for this pin before locking the RSTMUX8 register
to allow the ICSS1 PRU1 Ethernet PHY port to work properly. The
workaround was added only for the K2G-ICE board to configure the
pins needed for the PRUSS Ethernet usecase.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Link: https://lore.kernel.org/r/20210726232248.24395-1-s-anna@ti.com
2021-07-29 10:42:22 +05:30
Patrick Delaunay
558e699d15 arm: use the correct prototype for reset_cpu function
Align reset_cpu function with the next prototypes in
sysreset.h or in cpu_func.h to solve compilation issue:

  void reset_cpu(void);

This patch solves the prototype conflict when cpu_func.h is
included.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-07-28 19:30:22 -04:00
Simon Glass
975e7cf301 i2c: Rename SPL/TPL_I2C_SUPPORT to I2C
Rename these options so that CONFIG_IS_ENABLED can be used with them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
2021-07-28 14:29:37 -04:00
Simon Glass
69d9eda4da i2c: Rename CONFIG_SYS_I2C to CONFIG_SYS_I2C_LEGACY
It is quite confusing that CONFIG_SYS_I2C selects the legacy I2C and
CONFIG_DM_I2C selects the current I2C. The deadline to migrate I2C is less
than a year away.

Also we want to have a CONFIG_I2C for U-Boot proper just like we have
CONFIG_SPL_I2C for SPL, so we can simplify the Makefile rules.

Rename this symbol so it is clear it is going away.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
2021-07-28 14:29:37 -04:00
Simon Glass
f2d7a36ec2 Rename SPL_ETH_SUPPORT to SPL_ETH
Rename this option so that CONFIG_IS_ENABLED can be used with it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-28 14:27:54 -04:00
Simon Glass
933b2f09cb Rename SPL_POWER_SUPPORT to SPL_POWER
Rename this option so that CONFIG_IS_ENABLED can be used with it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-07-28 14:27:54 -04:00
Tom Rini
55efa84d0f - Add SMBIOS info for Khadas VIM boards
- Fix meson-axg-mipi PHY build
 - Fix VIM3 board phy-names property setup
 - Return correct value for non emmc boot sources on VIM3
 - add kernel compression vars
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAmD/0m0ACgkQd9zb2sjI
 SdHOuhAAzKV5VKWFjz+kxAWLhIeVqK1DixVkA8qMLNE9LYfF2ibv89yM0jaTQv84
 Zs4J9ak9xC2/LQPX7ui9CzAZ53yi7qM28aQd4MzRPBha0al8dehRZdcGNTRV/WBb
 CnbwW5inx2J1e+KSZ2PVqOnCTVX39ZMdEbZnxIJmSCcgrwj1eCPUzMv0wD0fqhyq
 piAbOpKLO6v1k/p4veTCa8gEimpp1Ni4QKqeLxkZ54hrt+uvrQbb7HxqfXuGwNG4
 IWnkfocZXN6nUbjNh7NitGgRZCMtiKJSgXrwlmluXoi0OyUNwxX7Fbn9JqsbWpMR
 lqFVJxbJ4jGozWK5wb5jcT5PArVkYgr+FN7lmqefysEltBjpv0JWqdxKH44RteyA
 wA4yPz/5Oe/iZJu9h2GzHuFHma2Dr8z43NrsIO/cTKN5uG9gzbKbp8IxV2P715OZ
 R5XPzSHLFD1Q/A855yKxvF1tlizSDdKo2pXZ2BfvLBZEljd37QmVkRSy+gPL3QhD
 bMICPJ1opuJZb9dEi0L54yk9+tm4ImWTuYRNOsFc4p9EGT4P9yydqMkpzuuHXRJb
 GcLoD+TXgoxK8PijX9QWdQPnb0FkFKShwWMXOn9zyzIDIzT4HlZN8HtyPCYmbyD1
 6uFWiQQEfvbzInPmQpgk5mZoblskMSI/pN+4KHKlH3X4yWK5YGQ=
 =zrJm
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20210727' of https://source.denx.de/u-boot/custodians/u-boot-amlogic

- Add SMBIOS info for Khadas VIM boards
- Fix meson-axg-mipi PHY build
- Fix VIM3 board phy-names property setup
- Return correct value for non emmc boot sources on VIM3
- add kernel compression vars
2021-07-27 11:42:31 -04:00
Artem Lapkin
4f038ee6dc board: amlogic: vim3: fix phy-names property setup
phy-names was improperly implemented resulting in an inoperable USB-OTG
port.

- phy-names = "usb2-phy0\0\0usb2-phy1\0";
+ phy-names = "usb2-phy0\0usb2-phy1";

Signed-off-by: Artem Lapkin <art@khadas.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-07-27 10:29:31 +02:00
Artem Lapkin
786c514946 VIM3: mmc_get_env_dev correct non emmc boot sources
need return -1 if boot source is not EMMC or SD ( for example it will be
useful if we have multy env sources configuration and device was booted
from SPI flash and env need read from SPI not from mmc )

Signed-off-by: Artem Lapkin <art@khadas.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-07-27 10:28:41 +02:00
Patrick Delaunay
2a7034c77d stm32mp1: add pull-up for gpio button PA13 and PA14
When a push-button is released and PA13/PA14 are defined as input (high-Z)
the LED should not be active as the circuit is open but a small current
leak through PCB or push-button close the circuit and allows a small LED
bias giving erroneous level voltage.

So it is recommended to activate an internal pull-up in order to clearly
fix the voltage at PA13/PA14 when button is released and to wait
a short delay before to read the GPIO value only when the pull-up is
correctly configured.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-07-27 09:47:40 +02:00
Kishon Vijay Abraham I
8baeeecbe3 doc: board: Move j721e document to doc/board/ti/ directory
Move j721e document from board/ti/j721e/README to
doc/board/ti/j721e_evm.rst after converting it to RST format.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Link: https://lore.kernel.org/r/20210721155849.20994-20-kishon@ti.com
2021-07-27 10:57:47 +05:30
Aswath Govindraju
6cfabddc3b board: ti: j721e: Add support for probing and configuring Torrent serdes on J7200
Add support for probing and configuring Torrent serdes on J7200.

Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Link: https://lore.kernel.org/r/20210721155849.20994-11-kishon@ti.com
2021-07-27 10:57:12 +05:30
Paul Barker
124b3030f5 arm: dts: Import am335x-sancloud-bbe devicetree
This device tree is imported from Linux 5.13.1 and enabled via the
am335x board file and the am335x evm defconfig.

Signed-off-by: Paul Barker <paul.barker@sancloud.com>
2021-07-27 10:56:09 +05:30
Simon Glass
5e19f4aa13 samsung: exynos: Convert SROMC interface to a driver
Add a bus driver for this and use it to configure the bus parameters for
the Ethernet interface. Drop the old pre-driver-model code.

Switch over to use driver model for Ethernet.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2021-07-27 10:34:27 +09:00
Michal Simek
f1bc214b00 arm64: zynqmp: Do not define do_reset() if sysreset is enabled
The SPL can also be compiled with sysreset drivers just fine, so
update the condition to cater for that option.
The same change was done by commit efa1a62ad2 ("ARM: imx8m: Do not define
do_reset() if sysreset is enabled").

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-07-26 09:18:45 +02:00
Mike Looijmans
50918d0df5 xilinx: Return ENVL_NOWHERE instead of ENVL_UNKNOWN
The system refuses to boot without any environment, so return ENVL_NOWHERE when
there's nowhere to store the environment instead of ENVL_UNKNOWN.

This fixes that the board won't boot from eMMC when CONFIG_ENV_IS_IN_FAT is not
defined, for example. Similar for other combinations.

Fixes: 1025bd098a "xilinx: zynqmp: Add support for saving variables"

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-07-26 09:18:45 +02:00
Ashok Reddy Soma
a70bdafd67 mmc: zynq_sdhci: Split set_tapdelay function to in and out
Split arasan_zynqmp_set_tapdelay() to handle input and output tapdelays
separately. This is required to handle zero values for ITAP and OTAP
values. If we dont split, we will have to remove the if() in the
function, which makes ITAP values to be overwritten when OTAP values are
called to set and vice-versa.

Restrict tap_delay value calculated to max allowed 8 bits for ITAP and 6
bits for OTAP for ZynqMP.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-07-26 09:18:45 +02:00
Stephan Gerhold
ccb8de2387 board: dragonboard410c: Fix fastboot
At the moment pressing the volume down key does not actually launch
fastboot. This is because setting "bootdelay" to "-1" actually
disables autoboot and drops to the U-Boot console. It does not execute
the "bootcmd".

The correct value for "bootdelay" here would be "-2", which disables
the delay and key checking and would immediately execute the "bootcmd".

However, even better in this case is using "preboot" to trigger Fastboot.
The advantage is that running "fastboot continue" will actually continue
the autoboot process instead of ending up in the U-Boot shell.

Also make sure to unset "preboot" again immediately in case the user
saves the environment after triggering fastboot.

Cc: Ramon Fried <rfried.dev@gmail.com>
Fixes: aa043ee91a ("db410c: automatically launch fastboot")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-07-23 18:53:46 -04:00
Stephan Gerhold
0204d1b56b board: dragonboard410c: Load U-Boot directly without LK
At the moment the U-Boot port for the DragonBoard 410c is designed
to be loaded as an Android boot image after Qualcomm's Little Kernel (LK)
bootloader. This is simple to set up but LK is redundant in this case,
since everything done by LK can be also done directly by U-Boot.

Dropping LK entirely has at least the following advantages:
  - Easier installation/board code (no need for Android boot images)
  - (Slightly) faster boot
  - Boot directly in 64-bit without a round trip to 32-bit for LK

So far this was not possible yet because of unsolved problems:

  1. Signing tool: The firmware expects a "signed" ELF image with extra
     (Qualcomm-specific) ELF headers, usually used for secure boot.
     The DragonBoard 410c does not have secure boot by default but the
     extra ELF headers are still required.

  2. PSCI bug: There seems to be a bug in the PSCI implementation
     (part of the TrustZone/tz firmware) that causes all other CPU cores
     to be started in 32-bit mode if LK is missing in the boot chain.
     This causes Linux to hang early during boot.

There is a solution for both problems now:

  1. qtestsign (https://github.com/msm8916-mainline/qtestsign)
     can be used as a "signing" tool for U-Boot and other firmware.

  2. A workaround for the "PSCI bug" is to execute the TZ syscall when
     entering U-Boot. That way PSCI is made aware of the 64-bit switch
     and starts all other CPU cores in 64-bit mode as well.

Simplify the dragonboard410c board by removing all the extra code that
is only used to build an Android boot image that can be loaded by LK.
This allows dropping the custom linker script, special image magic,
as well as most of the special build/installation instructions.

CONFIG_REMAKE_ELF is used to build a new ELF image that has both U-Boot
and the appended DTB combined. The resulting u-boot.elf can then be
passed to the "signing" tool (e.g. qtestsign).

The PSCI workaround is placed in the "boot0" hook that is enabled
with CONFIG_ENABLE_ARM_SOC_BOOT0_HOOK. The extra check for EL1 allows
compatibility with custom firmware that enters U-Boot in EL2 or EL3,
e.g. qhypstub (https://github.com/msm8916-mainline/qhypstub).

As a first step these changes apply only to DragonBoard410c.
Similar changes could likely also work for the DragonBoard 820c.

Note that removing LK wouldn't be possible that easily without a lot of
work already done three years ago by Ramon Fried. A lot of missing
initialization, pinctrl etc was already added back then even though
it was not strictly needed yet.

Cc: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
2021-07-23 18:53:45 -04:00
Masami Hiramatsu
1ad3c8365a board: synquacer: Initialize SCBM SMMU at board_init()
Since the SCBM SMMU is not only connected to the NETSEC
but also shared with the F_SDH30 (eMMC controller), that
should be initialized at board level instead of NETSEC.

Move the SMMU initialization code into board support
and call it from board_init().

Without this fix, if the NETSEC is disabled, the Linux
eMMC ADMA cause an error because SMMU is not initialized.

Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
2021-07-23 18:53:45 -04:00
Tom Rini
806734f41b Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq
fsl-qoriq: Update mc firmware size, address in LS1088A, LS2088A, LX2
Updates on ls1043aqds, ls1043ardb
Refactor I2C MUX Code on fsl-qoriq platforms.
2021-07-22 08:45:32 -04:00
Vincent Chen
219cb17311 board: sifive: unmatched: reset USB hub, PCIe-USB bridge, and ULPI device in SPL
Ensure USB hub, PCIe-USB bridge, and ULPI device to be reset
even if the rebooting is without power-cycling.

Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-07-21 22:25:15 +08:00
Vincent Chen
d3c96b9b46 board: sifive: unmatched: refine GEMGXL initialized function in SPL
Create a new function spl_reset_device_by_gpio to reset the device
whose reset pin is connected to the GPIO. Then, using this function
to initialize GEMGXL.

Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-07-21 22:25:15 +08:00
Zong Li
e52b83ab13 board: sifive: drop stuff related to unmatched revision 1
This patch reverts the following commits:
 - 4b4159d0f3 ("riscv: dts: add dts for unmatched rev1")
 - ffe9a394df ("board: sifive: support spl multi-dtb on unmatched board")

We won't plan to support unmatched that the revision below 3 in u-boot,
so they can be dropped because they might be useless.

Changed in v2:
 - rebase codebase to the latest master branch

Signed-off-by: Zong Li <zong.li@sifive.com>
Suggested-by: David Abdurachmanov <david.abdurachmanov@sifive.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-07-21 16:39:57 +08:00
Zong Li
66a21be674 board: sifive: remove the command for setting serial number
We wouldn't like to allow user to change the serial number, so remove
the command for changing serial number in EEPROM.

Signed-off-by: Zong Li <zong.li@sifive.com>
Suggested-by: David Abdurachmanov <david.abdurachmanov@sifive.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-07-21 16:38:25 +08:00
Wasim Khan
7528f4eb55 board: freescale: LX2162AQDS: Add MAINTAINER
Add "Wasim Khan <wasim.khan@nxp.com>" as MAINTAINER
for LX2162AQDS board

Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-07-20 14:53:43 +05:30
Wasim Khan
a61ca7e21d board: freescale: LX2160AQDS: Add MAINTAINER
Add "Wasim Khan <wasim.khan@nxp.com>" as MAINTAINER
for LX2160AQDS board

Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-07-20 14:53:43 +05:30
Wasim Khan
ad8e44f997 board: freescale: LX2160ARDB: Add MAINTAINER
Add "Wasim Khan <wasim.khan@nxp.com>" as MAINTAINER
for LX2160ARDB board

Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-07-20 14:53:43 +05:30
Wasim Khan
4c230d74d1 armv8: lx2160ardb: Add thermal node fixup for revc board
lx2160ardb Rev-C board has i2c node for thermal monitors
connected to different chip offset.
Add device tree fixup to use lx2160ardb dts and apply
thermal node fixups for lx2160ardb Rev-C board.

Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
[sp:thernal->thermal]
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-07-20 14:53:43 +05:30
Stephen Carlson
5cfc15dcfa board: freescale: t2080qds: Update I2C mux config
Updates the board configuration to enable use of the PCA9547 I2C mux.

Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-07-20 14:18:05 +05:30
Stephen Carlson
026339a8fa board: freescale: lx2160a: Update I2C mux config
Updates the board configuration to enable use of the PCA9547 I2C mux.

Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-07-20 14:18:05 +05:30
Stephen Carlson
17c2a308a5 board: freescale: ls2080a, ls2088a: Update I2C mux config
Updates the board configuration to enable use of the PCA9547 I2C mux.

Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
[Squashed ls2088a patch to fix compilation]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-07-20 14:18:05 +05:30
Stephen Carlson
f4cd4a7b8b board: freescale: ls1088a: Update I2C mux config
Updates the board configuration to enable use of the PCA9547 I2C mux.

Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-07-20 14:18:05 +05:30
Stephen Carlson
1a0db0104e board: freescale: ls1046a: Update I2C mux config
Updates the board configuration to enable use of the PCA9547 I2C mux.

Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-07-20 14:18:05 +05:30
Stephen Carlson
eba68e2bf7 board: freescale: ls1043aqds: Update I2C mux config
Updates the board configuration to enable use of the PCA9547 I2C mux.

Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-07-20 14:18:04 +05:30
Stephen Carlson
9b5eeb4572 board: freescale: ls1021aqds: Update I2C mux config
Updates the board configuration to enable use of the PCA9547 I2C mux.

Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-07-20 14:18:04 +05:30
Stephen Carlson
15347d2dea board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.

New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.

Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-07-20 14:18:04 +05:30
Tom Rini
dd3dfa50d8 Merge https://source.denx.de/u-boot/custodians/u-boot-marvell
- Marvell SheevaPlug: Convert Ethernet and SATA to Driver Model (Tony)
- Zyxel NSA310S NAS: Convert to Driver Model (Tony)
- Turris_omnia: Add `u-boot-env` NOR partition (Marek)
- Turris_omnia: Fixup MTD partitions in Linux' DTB (Marek)
- Espressobin: Enable 'mtd' command and define SPI NOR partitions (Pali)
2021-07-19 08:41:04 -04:00
Tom Rini
83befb4466 Merge tag 'ti-v2021.10-rc1' of https://source.denx.de/u-boot/custodians/u-boot-ti
- Enabled distro boot for all TI platforms.
- Cleanup for AM335x Guardian Board
- PRUSS rproc on AM65 platform.
- Add PMIC support for J7200
- Misc fixes for Nokia RX-51

# Conflicts:
#	arch/arm/mach-omap2/am33xx/Kconfig
2021-07-19 08:29:24 -04:00
Marek Behún
92f36c8e74 arm: mvebu: turris_omnia: fixup MTD partitions in Linux' DTB
Fixup SPI NOR partition nodes in Linux' device tree prior booting Linux.

Linux' devicetree does not contain "u-boot-env" partition and we do not
want to add it there because the address is different between stock
U-Boot and current upstream U-Boot.

Instead we add code that recreates partition nodes from scratch
according to how U-Boot sees them (which is defined in U-Boot's device
tree).

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-19 09:05:30 +02:00
Tony Dinh
6e73bb7e40 arm: kirkwood: Marvell Sheevaplug: Use Ethernet PHY name and address from device tree
- In DM Ethernet, the old "egiga0" name is no longer valid, so replace it
with Ethernet PHY name from device tree. Also, Ethernet PHY address
is available so read it from device tree.

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
2021-07-19 08:44:18 +02:00
Tony Dinh
5c151bfee4 arm: kirkwood: NSA310S: Use Ethernet PHY name from device tree
In DM Ethernet, the old "egiga0" name is no longer valid, so replace it
with Ethernet PHY name from device tree. Also, Ethernet PHY address
is available so read it from device tree.

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
2021-07-19 08:44:15 +02:00
Tom Rini
be5c0608b8 usb: Enforce DM_USB migration for USB_HOST devices.
As the deadline for migration to DM_USB, when using a USB host
controller has now gone two years past the deadline, enforce migration.
This is done by:

- Ensuring that all host controller options (other than the very legacy
  old MUSB ones) now select USB_HOST.  USB_HOST now enforces DM_USB and
  OF_CONTROL.
  - Remove other parts of Kconfig logic that had platforms pick DM_USB.
  - To keep Kconfig happy, have some select statements test for USB_HOST
    as well.
- Re-order some Kconfig entries and menus so that we can cleanly pick
  host or gadget roles.  For the various HCD options that have platform
  glue options, group them together and update dependencies in some
  cases.
- As SPL_DM_USB is not required, on platforms that had not yet enabled
  it, disable it.

Cc: Marek Vasut <marex@denx.de>
Cc: Icenowy Zheng <icenowy@aosc.io>
Cc: Samuel Holland <samuel@sholland.org>
Cc: FUKAUMI Naoki <naobsd@gmail.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-18 21:05:31 -04:00
Tom Rini
e8d3eaadcd treewide: Test on CONFIG_USB_HOST (or CONFIG_CMD_USB) not CONFIG_USB
As the logic here is only used when we have a USB host controller, test
on CONFIG_USB_HOST rather than CONFIG_USB in general.  This lets us move
towards using CONFIG_USB only as a menu symbol to say that we have some
form of USB, and then USB_HOST or USB_GADGET depending on the role that
USB plays within the build.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-18 21:05:31 -04:00
Tom Rini
96b97fa311 m68k: Remove M52277EVB board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.  As this is also the last in family remove the related
support as well.

Cc: Angelo Durgehello <angelo.dureghello@timesys.com>
Cc: TsiChung Liew <Tsi-Chung.Liew@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-18 21:03:57 -04:00
Tom Rini
a732f621bc m68k: Remove M54451EVB board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.  As this is also the last in family remove the related
support as well.

Cc: Angelo Durgehello <angelo.dureghello@timesys.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-18 21:03:57 -04:00
Tom Rini
5e770daa3c m68k: Remove M54418TWR board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Angelo Durgehello <angelo.dureghello@timesys.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-18 21:03:57 -04:00
Tom Rini
563cae7c46 m68k: Remove M54455EVB board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Angelo Durgehello <angelo.dureghello@timesys.com>
Cc: TsiChung Liew <Tsi-Chung.Liew@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-18 21:03:57 -04:00
Tom Rini
df761ba425 - mips: gardena-smart-gateway: adjust config to new production values
- mips: malta: convert to PCI DM and ETH DM
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiQkHUH+J02LLC9InKPlOlyTyXBgFAmD0dbMACgkQKPlOlyTy
 XBgxOBAAulyJqvTHDWIk6l6d8qseSBgWuwPf0mE/YDKowGrfLbiCWEJICvg3qeJZ
 tkIuT5/y2DCjRpKQ2i1GtgTtG2+7AzEMR9FuSys1NMXXyNiLrPdoXKvR/2sDv7F4
 V0UPhhaOPNTHObnKea9+x8Kb+fYhT8RrfPvnm55OTeTXpk/jKWUfH+LhQ6ij2lRp
 NXnbo5byDyxznn9c5VTT3urMmsXLQdoqiHGfa52+1Zn0TH5AvAHTTQNx4V1bzsKx
 z5vG4a5D9Ul52drxhWLgIwSEdwHc08oXA0G7dKnCT8fdZrONqH2QJ2CWQ1AhPQou
 Vb+J5fS69N5vJcNRXIHBTQr9R092HT1onV6xCgoy+W7hP0jJuFd8lf0Qs+TKwbxC
 t0SdRwXO3AUirejwBtJVfUCtdTQFFtulPIvJLCgLnqIwCzer7rVcLdlpWBaBen3M
 VEKFe9mrjYBdVnZiatxMffcplAkIzXturhXSlhE3vqJo3eJ/QPMJL4fnX9MWH8cc
 kKFGF1qILI+34mTR2lw+QOJzNehHr+Jre6QzuXUhCCW8APi6CTQeOR/7KqOfTDvH
 jZFO9tuOA3W5yQ0sLWmeD1SB+nGI+oQSebe1/ly9aPcYYNlp0w8drKcyUpMaqJ+U
 IhwEHszQesZCMkkhccBhtl9pgnfKoD0m0RAdlcFbD67VyPFQKxA=
 =wDfz
 -----END PGP SIGNATURE-----

Merge tag 'mips-pull-2021-07-18' of https://source.denx.de/u-boot/custodians/u-boot-mips

- mips: gardena-smart-gateway: adjust config to new production values
- mips: malta: convert to PCI DM and ETH DM
2021-07-18 18:31:16 -04:00
Daniel Schwierzeck
7b29249790 MIPS: malta: add support for PCI driver model
As almost all peripherals are connected via PCI dependent on the
used core card, PCI setup is always required. Thus run pci_init()
including PCI scanning and probing and core card specific setups
in board_early_init_r().

Also prepare support for dynamically managing the status of the
different PCI DT nodes dependent on used core card via option
CONFIG_OF_BOARD_FIXUP. Before this feature can be enabled,
the call order of the fix_fdt() init hook in board_init_f
needs to be changed. Otherwise rw_fdt_blob points to a read-only
NOR flash address. Thus this options needs to stay disabled
until the board_init_f problem could be solved. This breaks
running the default U-Boot image on real HW using the FPGA core
card but Qemu emulation still works. Currently Qemu is more
important as MIPS CI tests depend on Malta and the deadline
for PCI DM conversion will be enforced soon.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-07-18 20:37:39 +02:00
Ilias Apalodimas
ddf67daac3 efi_capsule: Move signature from DTB to .rodata
The capsule signature is now part of our DTB.  This is problematic when a
user is allowed to change/fixup that DTB from U-Boots command line since he
can overwrite the signature as well.
So Instead of adding the key on the DTB, embed it in the u-boot binary it
self as part of it's .rodata.  This assumes that the U-Boot binary we load
is authenticated by a previous boot stage loader.

Reviewed-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
Tested-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
Tested-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-07-18 14:43:56 +02:00
Tom Rini
d5dbc661c3 i.MX
----
 
 - mx7ulp : fix  WDOG
 - imx8 : Phytec
 - USB3 support for i.MX8
 
 CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/8277
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCYPLjyA8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76aBtgCfUI2SbFwh7oydllrwb0lEvWegfNcAn1JpR3Zn
 H41xrXQqCBedYKxvuUUL
 =5wvR
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20210717' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

i.MX
----

- mx7ulp : fix  WDOG
- imx8 : Phytec
- USB3 support for i.MX8

CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/8277
2021-07-17 10:52:21 -04:00
Ye Li
cb391e3399 imx8mq_evk: Enable the USB3.0 host port
Setup USB clock in board codes, and enable the DWC3 XHCI and
PHY drivers to make USB3.0 host port working on i.MX8MQ EVK.

Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Patrick Wildt <patrick@blueri.se>
2021-07-17 13:12:23 +02:00
Patrick Delaunay
3c1057c548 stm32mp: use device sequence number in boot_instance variable
Use the device sequence number in boot_instance variable
and no more the SDMMC instance provided by ROM code/TF-A.

After this patch we don't need to define the mmc alias in
device tree, for example:
  mmc0 = &sdmmc1;
  mmc1 = &sdmmc2;
  mmc2 = &sdmmc3;
to have a correct mapping between the ROM code boot device =
"${boot_device}${boot_instance}" and the MMC device in U-Boot.

With this patch the 'mmc0' device (used in mmc commands) is
always used when only one instance sdmmc is activated in device
tree, even if it is only the sdmmc2 or sdmmc3.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-07-16 09:28:46 +02:00
Tom Rini
d3fc3da9a4 Merge https://source.denx.de/u-boot/custodians/u-boot-x86
- x86: various improvements made in getting Chromium OS verified boot
  running on top of coreboot, booting into U-Boot.
2021-07-15 11:06:24 -04:00
Pali Rohár
cc434fccba Nokia RX-51: Add support for booting kernel in zImage format
Enable U-Boot bootz command and update env scripts to try loading also
zImage file and to try booting via bootz command.

Update also lowlevel_init.S code for checking validity of zImage magic to
correctly relocate kernel in zImage format.

This change allows U-Boot to directly boot Linux kernel without need for
converting kernel image into U-Boot uImage format.

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Link: https://lore.kernel.org/r/20210618132704.32066-1-pali@kernel.org
2021-07-15 17:56:04 +05:30
Gireesh Hiremath
9cd380ef5f am335x, guardian: Enable panel driver Himax HX8238D
- Enable lcd controller
- Display splash screen

Signed-off-by: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Link: https://lore.kernel.org/r/20210611161350.2141-16-Gireesh.Hiremath@in.bosch.com
2021-07-15 17:56:03 +05:30
Gireesh Hiremath
ae628fb6da am335x, guardian: Enable backlight
Enable backlight, set brightness value and dimming frequency

Signed-off-by: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Link: https://lore.kernel.org/r/20210611161350.2141-13-Gireesh.Hiremath@in.bosch.com
2021-07-15 17:56:03 +05:30
Gireesh Hiremath
d364926da3 am335x, guardian: update swi logic
read boot mode gpio and set the swi status

Signed-off-by: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Link: https://lore.kernel.org/r/20210611161350.2141-12-Gireesh.Hiremath@in.bosch.com
2021-07-15 17:56:03 +05:30
Gireesh Hiremath
195854287b am335x, guardian: code cleanup and boot optimization
- remove redundant headers and boot modes from board file

Signed-off-by: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Link: https://lore.kernel.org/r/20210611161350.2141-9-Gireesh.Hiremath@in.bosch.com
2021-07-15 17:56:03 +05:30
Moses Christopher
050531db00 am335x, guardian: mem: Add board dependent mem values
- Add mem-guardian.h derived from am33xx/mem.h

    * Add GPMC config values optimized for Bosch Guardian Board
    * NAND Chip used by Bosch Guardian Board is Micron MT29F4G08ABBFA

Signed-off-by: Moses Christopher <BollavarapuMoses.Christopher@in.bosch.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Link: https://lore.kernel.org/r/20210611161350.2141-3-Gireesh.Hiremath@in.bosch.com
2021-07-15 17:56:03 +05:30
Simon Glass
4dfe4b44cc x86: coreboot: Use vendor in the Kconfig
Use VENDOR_COREBOOT instead of TARGET_COREBOOT so we can have multiple
coreboot boards, sharing options. Only SYS_CONFIG_NAME needs to be
defined TARGET_COREBOOT.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-07-15 19:50:21 +08:00
Simon Glass
50cf68c728 x86: coral: Allow booting from coreboot
Set up coral so that it can boot from coreboot, even though it is a
bare-metal build. This helps with testing since the same image can be used
in both cases.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-07-15 19:50:14 +08:00
Simon Glass
e5bfcab97b x86: coreboot: Show the BIOS date
The BIOS version may not be present, e.g. on a Chrome OS build. Add the
BIOS date as well, so we get some sort of indication of coreboot's
vintage.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-07-15 19:50:12 +08:00
Pali Rohár
a4c577f981 mmc: mmc_get_op_cond: Allow quiet detection of eMMC
Add a new 'quiet' argument to mmc_get_op_cond() function which avoids
printing error message when SD/eMMC card is not detected.

Espressobin and mx6cuboxi boards use this function for detecting presence
of eMMC and therefore it is expected and normal that eMMC does not have to
be connected. So error message "Card did not respond to voltage select!"
should be skipped in this case as it is not an error.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-07-15 10:53:11 +02:00
Pali Rohár
42ba56691c arm: mvebu: Espressobin: Use function mmc_get_op_cond() for detecting eMMC
Use function mmc_get_op_cond() instead of mmc_init() for detecting presence
of eMMC. Documentation for this function says that it could be used to
detect the presence of SD/eMMC when no card detect logic is available.

This function is also used by mx6cuboxi board for detecting presence of eMMC.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-15 10:53:05 +02:00
Pali Rohár
aeff1740b6 arm: mvebu: Espressobin: Fix setting $fdtfile env
Ensure that 'env default -a' always set correct value to $fdtfile, even
when custom user variable is already stored in non-volatile env storage
(means that env_get("fdtfile") call returns non-NULL value).

As default value is now correctly set like if specified at compile time in
CONFIG_EXTRA_ENV_SETTINGS, there is no need to set $fdtfile explicitly via
env_set("fdtfile", ...) call.

So remove wrong skip based on env_get("fdtfile") and then also unneeded
env_set("fdtfile", ...) call.

Fixes: c4df0f6f31 ("arm: mvebu: Espressobin: Set default value for $fdtfile env variable")
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-15 10:53:05 +02:00
Stephan Gerhold
e2f82f93f8 board: stemmy: Copy atags for booting downstream/vendor kernel
The U-Boot "stemmy" board is mainly intended to simplify booting
mainline Linux on various smartphones from Samsung based on ST-Ericsson
Ux500. While the mainline kernel is working great, there are still some
features missing there. In particular, it is currently not possible to
charge the battery when using the mainline kernel.

This means that it is still necessary to boot the downstream/vendor
kernel from Samsung sometimes to charge the device. That kernel is
ancient, still uses board files + ATAGS instead of device trees and
relies on a strange very long kernel command line hardcoded in the
Samsung bootloader.

Actually, since mainline is booted with device trees there is a very
simple way to make the old downstream kernel work as well: We can
simply take most of the ATAGS passed to U-Boot from the Samsung
bootloader and copy them as-is when booting a kernel without device
tree. That way the long command line and other needed ATAGS are copied
as-is without having to bother with them.

The only exception is the ATAG_INITRD - since the initrd is loaded
by U-Boot, the atag for that should be generated in U-Boot so it points
to the correct address. All other ATAGS are copied as-is and not
generated in U-Boot.

Also use the chance and provide a serial# for U-Boot by parsing the
ATAG_SERIAL that is also passed by the Samsung bootloader.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2021-07-14 16:48:12 -04:00
Stephan Gerhold
03585d52fc board: stemmy: Parse atags to get available memory
At the moment the "stemmy" board attempts to detect the RAM size with
a simple memory test (get_ram_size()). Unfortunately, this does not work
correctly for devices with 768 MiB RAM (e.g. Samsung Galaxy Ace 2
(GT-I8160), "codina"). Reading/writing memory after the 768 MiB RAM
succeeds but actually overwrites some earlier parts of the memory.

For U-Boot this does not result in any major problems, but on Linux
this will eventually lead to strange crashes because of the memory
corruption.

Since the "stemmy" U-Boot port is designed to be chainloaded from
the original Samsung bootloader, the most reliable way to get the
available amount of RAM is to look at the ATAGS passed by the Samsung
bootloader. Fortunately, the header used to generate ATAGS in U-Boot
(asm/setup.h) can also be easily used to parse them.

Also clarify and simplify stemmy.h a bit to make it more clear where
some of the magic values in there are actually coming from.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2021-07-14 16:48:11 -04:00
Cody Gray
55d46761a3 mx6sabresd: Make checkboard respect CONFIG_NXP_BOARD_REVISION
The default implementation of checkboard() calls the
nxp_board_rev_string() function
to retrieve a character representing the revision number of the board.
However, this
attempt to retrieve the revision number may fail in certain situations or be
otherwise undesirable.

There is already a configuration option to avoid retrieving the
revision number of
the board: CONFIG_NXP_BOARD_REVISION. In fact, if this option is enabled, the
nxp_board_rev_string() function's definition will be omitted entirely,
meaning that the previous implementation of checkboard() would result
in a linker error.

This changeset makes the default implementation of checkboard() respect the
CONFIG_NXP_BOARD_REVISION configuration option, only attempting to retrieve
the board revision number if that option is defined.

Signed-off-by: Cody Gray <cody@codygray.com>
2021-07-10 18:14:25 +02:00
Tim Harvey
d107235a38 board: gateworks: venice: remove forced enable of GSC thermal protection
The Gateworks System Controller thermal protection feature will disable
the board primary power supply if the on-board temperature sensor
reaches 86C. In many cases this could occur before the temperature
critical components such as CPU, DRAM, eMMC, and power supplies have
reached their max temperature.

Remove the forced re-enable of thermal protection so that users can
knowingly disable it.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-07-10 18:12:42 +02:00
Tim Harvey
0f3f6e62ea board: gateworks: venice: add ftd_file env vars on boot
The ftd_file* vars can be used by bootscripts to look for
appropriate dtb's

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-07-10 18:12:42 +02:00
Tim Harvey
9d2e639f8e board: gateworks: venice: display DTB used
Display the DTB file used for U-Boot.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-07-10 18:12:42 +02:00
Tim Harvey
658eb1abd8 board: gateworks: venice: gsc: fix voltage offset
The voltage offset property is in microvolts so must be scaled
accordingly.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-07-10 18:12:42 +02:00
Tim Harvey
c4e5656620 board: gateworks: venice: gsc: fix typo
Fix typo in error message.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-07-10 18:12:42 +02:00
Tim Harvey
c9f7ef37f9 board: gateworks: venice: add imx8mm-gw7901 support
The Gateworks GW7901 is an ARM based single board computer (SBC)
featuring:
 - i.MX8M Mini SoC
 - LPDDR4 DRAM
 - eMMC FLASH
 - SPI FRAM
 - Gateworks System Controller (GSC)
 - Atmel ATECC Crypto Authentication
 - USB 2.0
 - Microchip GbE Switch
 - Multiple multi-protocol RS232/RS485/RS422 Serial ports
 - onboard 802.11ac WiFi / BT
 - microSD socket
 - miniPCIe socket with PCIe, USB 2.0 and dual SIM sockets
 - Wide range DC power input
 - 802.3at PoE

To add support for this board:
 - add dts from Linux (accepted for v5.14)
 - add SPL PMIC config

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-07-10 18:12:41 +02:00
Teresa Remmet
bbf04b28d2 board: phytec: imx8mp-phycore: Switch to binman
Use now binman for image creation.

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2021-07-10 16:53:34 +02:00
Teresa Remmet
fd82763cd2 board: phytec: phycore-imx8mp: Enable DVS1 control
Enable DVS1 control through PMIC_STBY_REQ.

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-07-10 16:53:34 +02:00
Teresa Remmet
0f166b85ac board: phytec: phycore_imx8mp: Set VDD_ARM to 0,95V
Increase VDD_ARM to prevent timing issues as VDD_SOC is
used in OD mode. Also increase GIC clock.

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-07-10 16:53:34 +02:00
Teresa Remmet
60f64bec41 board: phytec: phycore_imx8mp: Add fec support
Enable support for the fec ethernet on phyCORE-i.MX8MP.

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2021-07-10 16:53:34 +02:00
Teresa Remmet
1feac813fe board: phytec: phycore_imx8mp: Change debug UART
With the first redesign the debug UART had changed from
UART2 to UART1.
As the first hardware revision is considered as alpha and
will not be supported in future. The old setup will not
be preserved.

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2021-07-10 16:53:34 +02:00
Tim Harvey
c1f6fd2bb7 pci: imx: use reset-gpios if defined by device-tree
If reset-gpio is defined by device-tree use that if
CONFIG_PCIE_IMX_PERST_GPIO is not defined.

Note that after this the following boards which define
CONFIG_PCIE_IMX_PERST_GPIO in their board header file as well as their
device-tree should be able to remove CONFIG_PCIE_IMX_PERST_GPIO without
consequence:
 - mx6sabresd
 - mx6sxsabresd
 - novena
 - tbs2910
 - vining_2000

Note that the ge_bx50v3 board uses CONFIG_PCIE_IMX_PERST_GPIO and does
not have reset-gpios defined it it's pcie node in the dt thus removing
CONFIG_PCIE_IMX_PERST_GPIO globally can't be done until that board adds
reset-gpios.

Cc: Ian Ray <ian.ray@ge.com> (maintainer:GE BX50V3 BOARD)
Cc: Sebastian Reichel <sebastian.reichel@collabora.com> (maintainer:GE BX50V3 BOARD)
Cc: Fabio Estevam <festevam@gmail.com> (maintainer:MX6SABRESD BOARD)
Cc: Marek Vasut <marex@denx.de> (maintainer:NOVENA BOARD)
Cc: Soeren Moch <smoch@web.de> (maintainer:TBS2910 BOARD)
Cc: Silvio Fricke <open-source@softing.de> (maintainer:VINING_2000 BOARD)
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-07-10 16:53:34 +02:00
Tim Harvey
31273c5af5 imx: ventana: display 'none' for MMC if board does not have it
print 'None' instead of just a blank line if nothing is detected:
MMC:  None

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-07-10 16:53:34 +02:00
Tim Harvey
b57b14dc70 imx: ventana: add support for DLC0700XDP21LF LCD display
Add LVDS support for DLC0700XDP21LF 7in 1024x600 display
(equivalent to the DLC-700JMGT4 with new touch controller)

Signed-off-by: Robert Jones <rjones@gateworks.com>
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-07-10 16:53:33 +02:00
Tim Harvey
e9284c03bc imx: ventana: display neteowrk PHY
Add displaying the detected network PHY on boot.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-07-10 16:53:33 +02:00
Tim Harvey
9634c748b1 imx: ventana: add DP83867 PHY LED configuration
Add DP83867 PHY LED configuration.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-07-10 16:53:33 +02:00
Tim Harvey
0545b17b69 imx: ventana: put LTC3676 regulators in continuous mode
In the default pulse-skipping mode regulators that are very lightly
loaded can fail to regulate properly. Switching them to always use
continuous mode causes only around 10mW of overall system power
difference in a lightly loaded system that isn't already operating
them in continuous mode.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-07-10 16:53:33 +02:00
Tim Harvey
722d22813e imx: ventana: put PFUZ100 regulators in continuous mode
In the default 'auto' mode regulators that are very lightly loaded
can be put in PFM mode and fail to regulator properly. Switching them
to always use continuous PWM mode has a neglibable affect on system
power and garuntees proper regulation under lightly loaded circumstances.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-07-10 16:53:33 +02:00
Tim Harvey
a32be88da0 imx: ventana: add PMIC fix for GW54xx-G
Substitutions in EOL parts changes the VDD_2P5 voltage rail such that
the previously unused VGEN6 LDO is needed in place of the lower power
VGEN5 for the GW54xx-G.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-07-10 16:53:33 +02:00
Tim Harvey
729fd990c9 imx: ventana: remove unneeded includes
remove unnecessary includes

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-07-10 16:53:33 +02:00
Christoph Niedermaier
ac24244ba4 ARM: imx6: Update dhelectronics/dh_imx6/MAINTAINERS file
Adding new DH electronics mailing list and update list of maintainers.

Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
2021-07-10 15:57:33 +02:00
Tom Rini
490101a5e5 Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sunxi
Aside from the usual fixes and updates one visible change is the
MMC update, which fixes some lingering bugs and gives a decent speed
increase on some boards (9->19 MB/s on H6, 21->43 MB/s on A64 eMMC).
I am keeping an watchful eye on bug reports here, to spot any correctness
regressions.
Another change is finally the enablement of the first USB host port on
many boards without micro-USB (data) sockets, like the Pine64 family.
That doubles the number of usable USB ports from 1 to 2 on those boards.

Some smaller fixes, 4GB DRAM support (on the H616) and a new board (ZeroPi)
conclude this first round of changes.

Compile-tested for all 157 sunxi boards, boot-tested on Pine H64,
Pine64-LTS, OrangePi Zero 2 and BananaPi M2 Berry.

Summary:
- DT update for H3/H5/H6
- Enable first USB port on boards without micro-USB
- ZeroPi board support
- 4GB DRAM support for H616 boards
- MMC fixes and speed improvement
- some fixes
2021-07-09 21:08:52 -04:00
Andre Przywara
212224ed68 sunxi: board: Add H616 MMC2 pins
We hardcode the pinctrl setting for the MMC controllers in boards.c,
since we need them also in the SPL, where there is no DT yet.

Add the respective setting for the H616 SoC, to enable eMMC on boards
with this SoC as well.
Also to make diagnosing this problem easier, print a warning if a board
tries to setup MMC2 pins without a respective SoC setting being defined.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jagan Teki <jagan at amarulasolutions.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec at siol.net>
2021-07-10 01:22:09 +01:00
Yu-Tung Chang
2527b24f39 sunxi: h3: Add initial ZeroPi support
ZeroPi is a new board of high performance with low cost
designed by FriendlyElec., using the Allwinner H3 SOC.

ZeroPi features
- Allwinner H3, Quad-core Cortex-A7@1.2GHz
- 256MB/512MB DDR3 RAM
- microsd slot
- 10/100/1000Mbps Ethernet
- Debug Serial Port
- DC 5V/2A power-supply

Signed-off-by: Yu-Tung Chang <mtwget@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-07-10 01:22:09 +01:00
Tim Harvey
800433814a octeontx: do not require cavium BDK node to be present
The cavium,bdk node is a non-standard dt node used by the BDK and
therefore it is removed from the dt before booting Linux. Do not
require this node to exist as it won't for standard dt's.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-08 16:40:52 +02:00
Tom Rini
4ee73b00ba Revert "arm: Remove nsa310s board"
While this platform has not yet been converted, there is active efforts
to do so.  Keep the platform for now.

This reverts commit aa697e6904.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07 22:55:41 -04:00
Tom Rini
7d0559910f sniper: Add build guards around MUSB support code
If MUSB support is disabled, these parts of the code will fail to build.

Cc: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07 22:22:42 -04:00
Tom Rini
570c3dcfc1 arm: Remove spear600 boards and the rest of SPEAr support
These boards have not been converted to CONFIG_DM_USB by the deadline
and is also missing conversion to CONFIG_DM.  Remove them.  As this is
the last of the SPEAr platforms, so remove the rest of the remaining
support as well.

Cc: Vipin Kumar <vipin.kumar@st.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07 22:22:42 -04:00
Tom Rini
d7221d0d66 arm: Remove spear320 boards
These boards have not been converted to CONFIG_DM_USB by the deadline
and is also missing conversion to CONFIG_DM.  Remove them.  As this is
also the last SPEAR3XX platform, remove that symbol as well.

Cc: Vipin Kumar <vipin.kumar@st.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07 22:22:42 -04:00
Tom Rini
1dc77c290f arm: Remove spear310 boards
These boards have not been converted to CONFIG_DM_USB by the deadline
and is also missing conversion to CONFIG_DM.  Remove them.

Cc: Vipin Kumar <vipin.kumar@st.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07 22:22:42 -04:00
Tom Rini
0e377bbabb arm: Remove spear300 boards
These boards have not been converted to CONFIG_DM_USB by the deadline
and is also missing conversion to CONFIG_DM.  Remove them.

Cc: Vipin Kumar <vipin.kumar@st.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07 22:22:42 -04:00
Tom Rini
aa697e6904 arm: Remove nsa310s board
These boards have not been converted to CONFIG_DM_USB by the deadline
and is also missing conversion to CONFIG_DM.  Remove it

Cc: Gerald Kerma <dreagle@doukki.net>
Cc: Tony Dinh <mibodhi@gmail.com>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07 22:22:42 -04:00
Tom Rini
dee08b1999 arm: Remove gplugd board
These boards have not been converted to CONFIG_DM_USB by the deadline
and is also missing conversion to CONFIG_DM.  Remove it

Cc: Ajay Bhargav <contact@8051projects.net>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07 22:22:42 -04:00
Tom Rini
bc08dc563e arm: Remove edb9315a board
These boards have not been converted to CONFIG_DM_USB by the deadline
and is also missing conversion to CONFIG_DM.  Remove it.

This is also the last PL010_SERIAL using board, so remove those
references.

Cc: Sergey Kostanbaev <sergey.kostanbaev@fairwaves.ru>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07 22:22:42 -04:00
Tom Rini
f4a6f75b48 arm: Remove at91rm9200ek boards
These boards have not been converted to CONFIG_DM_USB by the deadline
and is also missing conversion to CONFIG_DM.  Remove them.

Cc: Andreas Bießmann <andreas@biessmann.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07 22:22:42 -04:00
Tom Rini
ec6b37cef4 ppc: Remove T4160RDB board
This board has not been converted to CONFIG_DM_PCI by the deadline and is
also missing conversion to CONFIG_DM.  Remove it.  As this is the last
ARCH_T4160 platform, remove that support as well.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07 19:52:24 -04:00
Tom Rini
1567e3255d ppc: Remove MPC832XEMDS boards
These boards have not been converted to CONFIG_DM_PCI by the deadline and is
also missing conversion to CONFIG_DM.  Remove them.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07 19:52:24 -04:00
Tom Rini
6c332e2b8c ppc: Remove MPC8323ERDB board
This board has not been converted to CONFIG_DM_PCI by the deadline and is
also missing conversion to CONFIG_DM.  Remove it.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07 19:52:24 -04:00
Tom Rini
139ff3be23 ppc: Remove MPC8315ERDB board
This board has not been converted to CONFIG_DM_PCI by the deadline and is
also missing conversion to CONFIG_DM.  Remove it.  As this is the last
ARCH_MPC8315 platform, remove that support as well.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07 19:52:24 -04:00
Tom Rini
1c58857ad7 ppc: Remove sbc8641d board
This board has not been converted to CONFIG_DM_PCI by the deadline and is
also missing conversion to CONFIG_DM.  Remove it.  This is also the last
of the ARCH_MPC8641/MPC8610 platforms, so remove that support as well.

Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-07 19:52:24 -04:00
Tom Rini
ed7fe2bee1 ppc: Remove xpedite boards
These boards have not been converted to CONFIG_DM_PCI by the deadline and is
also missing conversion to CONFIG_DM.  Remove them.  As this includes
the last ARCH_MPC8572 platform, remove that as well.

Cc: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Peter Tyser <ptyser@xes-inc.com>
2021-07-07 19:52:24 -04:00
Tom Rini
66e3c64f2c ppc: Remove kmcoge4 board
This board has not been converted to CONFIG_DM_PCI by the deadline and is
also missing conversion to CONFIG_DM.  Remove it.

Cc: Valentin Longchamp <valentin.longchamp@hitachi-powergrids.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07 19:52:24 -04:00
Tom Rini
806968935c ppc: Remove MPC8568MDS board
This board has not been converted to CONFIG_DM_PCI by the deadline and is
also missing conversion to CONFIG_DM.  Remove it.  As this is the last
ARCH_MPC8568 platform, remove that support as well.

Cc: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07 19:52:23 -04:00
Tom Rini
6c3d99335c ppc: Remove T1023RBD boards and T1024RDB_SECURE_BOOT
These boards have not been converted to CONFIG_DM_PCI by the deadline
and is also missing conversion to CONFIG_DM.  Remove them.  As this is
the only ARCH_T1023 platform left, remove that support as well.

Cc: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07 19:52:23 -04:00
Tom Rini
98898601b4 ppc: Remove MPC8555CDS boards
These boards have not been converted to CONFIG_DM_PCI by the deadline and is
also missing conversion to CONFIG_DM.  Remove them.  As this is the only
ARCH_MPC8555 platform left, remove that support as well.

Cc: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07 19:52:23 -04:00
Tom Rini
a8571337d7 ppc: Remove MPC8541CDS board
This board has not been converted to CONFIG_DM_PCI by the deadline and is
also missing conversion to CONFIG_DM.  Remove it.  As this is the only
MPC8541 target left, remove that architecture support as well.

Cc: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07 19:52:23 -04:00
Tom Rini
5fe4c0cc6e ppc: Remove TQM834x board
This board has not been converted to CONFIG_DM_PCI by the deadline and is
also missing conversion to CONFIG_DM.  Remove it.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07 19:52:23 -04:00
Tom Rini
bb656c687b ppc: Remove sbc8548 boards
These boards have not been converted to CONFIG_DM_PCI by the deadline and are
also missing conversion to CONFIG_DM.  Remove them.

Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07 19:52:23 -04:00
Tom Rini
6843862342 ppc: Remove caddy2 / vme8349 boards
These boards have not been converted to CONFIG_DM_PCI by the deadline
and is also missing conversion to CONFIG_DM.  Remove them.

Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07 19:52:23 -04:00
Tom Rini
7458f18e5c ppc: Remove MPC8313ERDB boards
These boards have not been converted to CONFIG_DM_PCI by the deadline.
Remove them.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07 19:52:23 -04:00
Tom Rini
af96210ae7 ppc: Remove ve8313 board
This board has not been converted to CONFIG_DM_PCI by the deadline.
Remove it.

Cc: Heiko Schocher <hs@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Heiko Schocher <hs@denx.de>
2021-07-07 19:52:23 -04:00
Tom Rini
b617d40c50 ppc: Remove mpc8308_p1m board
This board has not been converted to CONFIG_DM_PCI by the deadline.
Remove it.

Cc: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07 19:52:23 -04:00
Tom Rini
3588e20060 ppc: Remove sbc8349 board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07 19:52:23 -04:00
Tom Rini
9b7993bba9 m68k: Remove M5475x boards
These board has not been converted to CONFIG_DM_PCI by the deadline.
Remove them.  As this is the last of the mcf547x_8x family of boards,
remove that support as well.

Cc: TsiChung Liew <Tsi-Chung.Liew@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07 19:52:22 -04:00
Tom Rini
eb83d10b42 m68k: Remove M5485 boards
These board has not been converted to CONFIG_DM_PCI by the deadline.
Remove them.  As this is all of the CONFIG_M548x platforms as well,
remove that code.

Cc: TsiChung Liew <Tsi-Chung.Liew@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07 19:52:08 -04:00
Tom Rini
5b8a83551d Merge branch '2021-07-06-update-to-gcc11-clang11'
- Update CI to use gcc-11.1 and clang-11 to build everything.  This
  requires a few fixes to the code that these newer compilers have
  exposed.
2021-07-07 13:32:22 -04:00
Tom Rini
cb80ff20f2 bootstage: Eliminate when not enabled
When we do not have bootstage enabled, rather than include an empty
dummy function, we just don't reference it.  This saves us space in some
tight builds.  This also shows a few cases where show_boot_progress was
incorrectly guarded before.

Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07 10:17:54 -04:00
Tom Rini
265724cb22 eb_cpu5282: Declare diplay_width / display_height as externs
The board code here references the display_width / display_height
variables set in the video driver, declare these as externs as gcc-11
will notice and lead to a multiple definition error.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07 10:17:54 -04:00
Tom Rini
8627db79ca freescale: Drop unnecessary cpld_data_t non-typedef
In some board cpld.h files the definition of the cpld_data struct
not-quite makes a typedef for cpld_data_t.  This problem is caught with
gcc-11 as a multiple definition error.  As there are no users of this
non-typedef, fix this by not declaring it one to begin with.

Cc: Priyanka Jain <priyanka.jain@nxp.com>
Cc: Shengzhou Liu <Shengzhou.Liu@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07 10:17:54 -04:00
Tianrui Wei
c9135d5a7a riscv: dts: add OpenPiton RISC-V board dts support
Previous device tree for OpenPiton emits a warning during compilation.
This commit fixes the previous warning adds dts to the OpenPiton RISC-V
board and added the device tree to MAINTAINER file.

Signed-off-by: Tianrui Wei <tianrui-wei@outlook.com>
Reported-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-07-07 20:34:02 +08:00
Tom Rini
5617efd2c8 Merge branch '2021-07-06-platform-updates'
- mpc8379erdb DM_USB, DM_PCI and DM_ETH support.
- Drop PCI support from the integrator family of boards
- Add synquacer support
- Assorted lpc32xx updates and improvements
- snapdragon (and related) fixes, Broadcom iproc update
2021-07-06 18:10:10 -04:00
Trevor Woerner
ba621fe3a9 lpc32xx: ea-lpc3250devkitv2: enable i2c (DM)
Enable a DMed i2c driver for the ea-lpc3250devkitv2 board.
Include some sample commands/output for testing.

Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2021-07-06 14:12:15 -04:00
Trevor Woerner
faf78fd464 arm: lpc32xx: add EA LPC3250 DevKitv2 board support
Add basic support for running U-Boot on the Embedded Artists LPC3250
Developer's Kit v2 board by launching U-Boot from the board's s1l loader
(which comes pre-installed on the board).

Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2021-07-06 14:12:14 -04:00
Trevor Woerner
bd4dbf9e43 lpc32xx: Kconfig: switch to CONFIG_CONS_INDEX
There's nothing special or unique to the lpc32xx that requires its own config
parameter for specifying the console uart index. Therefore instead of using
the lpc32xx-specific CONFIG_SYS_LPC32XX_UART include parameter, use the
already-available CONFIG_CONS_INDEX from Kconfig.

Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-06 14:11:50 -04:00
Masami Hiramatsu
5cd4a355e0 board: synquacer: Add DeveloperBox 96boards EE support
Add the DeveloperBox 96boards EE support. This board is also
known as Socionext SynQuacer E-Series. It contians one "SC2A11"
SoC, which has 24-cores of arm Cortex-A53, and 4 DDR3 slots,
3 PCIe slots (1 4x port and 2 1x ports which are expanded via
PCIe bridge chip), 2 USB 3.0 ports and 2 USB 2.0 ports, 2 SATA
ports and 1 GbE, 64MB NOR flash and 8GB eMMC on standard
MicroATX Form Factor.

For more information, see this page;
  https://www.96boards.org/product/developerbox/

Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
2021-07-06 14:11:50 -04:00
Linus Walleij
7dd42be9f9 ARM: integrator: Drop PCI support
We didn't convert the Integrator to use DM for PCI in
time, and we don't use it either so let's just drop
PCI support from the Integrator.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2021-07-06 14:07:36 -04:00
Sinan Akman
c8be85f3ff mpc8379erdb: enable DM_USB DM_PCI DM_ETH
Signed-off-by: Sinan Akman <sinan@writeme.com>
2021-07-06 14:07:36 -04:00
Zong Li
4b4159d0f3 board: sifive: support spl multi-dtb on unmatched board
There are two revisions of unmatched board with different DDR timing,
we'd like to support multi-dtb mechanism in SPL, then it selects the
right DTB at runtime according to PCB revision in I2C EEPROM.

Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-07-06 20:24:26 +08:00
Zong Li
05e254862f board: sifive: Add an interface to get PCB revision
There are different DDR parameter settings for different board
revisions. Add a new interface to get the PCB revision to determine
which DT should be selected at runtime.

Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-07-06 20:24:25 +08:00
Zong Li
e2172aa83d riscv: sifive: fu740: kconfig: Enable support for Opencores I2C controller
Enable the Opencores I2C controller on FU740

Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-07-06 20:24:25 +08:00
Zong Li
946afdf620 board: sifive: unmatched: add initial support for a platform ID EEPROM
Add initial support for the PCB description EEPROM for SiFive HiFive
Unmatched boards.

This implementation is refactored based on Paul Walmsley's porting and
adopt the suggestions from David Abdurachmanov.

Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: David Abdurachmanov <david.abdurachmanov@sifive.com>
Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-07-06 20:24:25 +08:00
Tianrui Wei
8a44fe6943 board: riscv: add openpiton-riscv64 SoC support
This patch adds openpiton-riscv64 SOC support. In particular, this
board supports a standard bootflow through zsbl->u-boot SPL->
opensbi->u-boot proper->Linux. There are separate defconfigs for
building u-boot SPL and u-boot proper

Signed-off-by: Tianrui Wei <tianrui-wei@outlook.com>
Signed-off-by: Jonathan Balkind <jbalkind@ucsb.edu>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-07-06 13:50:56 +08:00
Tom Rini
6b69f15fd6 Xilinx changes for v2021.10
clk:
 - Add driver for Xilinx Clocking Wizard IP
 
 fdt:
 - Also record architecture in /fit-images
 
 net:
 - Fix plat/priv data handling in axi emac
 - Add support for 10G/25G speeds
 
 pca953x:
 - Add missing dependency on i2c
 
 serial:
 - Fix dependencies for DEBUG uart for pl010/pl011
 - Add setconfig option for cadence serial driver
 
 watchdog:
 - Add cadence wdt expire now function
 
 zynq:
 - Update DT bindings to reflect the latest state and descriptions
 
 zynqmp:
 - Update DT bindings to reflect the latest state and descriptions
 - SPL: Add support for ECC DRAM initialization
 - Fix R5 core 1 handling logic
 - Enable firmware driver for mini configurations
 - Enable secure boot, regulators, wdt
 - Add support xck devices and 67dr
 - Add psu init for sm/smk-k26 SOMs
 - Add handling for MMC seq number via mmc_get_env_dev()
 - Handle reserved memory locations
 - Add support for u-boot.itb generation for secure OS
 - Handle BL32 handoffs for secure OS
 - Add support for 64bit addresses for u-boot.its generation
 - Change eeprom handling via nvmem aliases
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCYN105QAKCRDKSWXLKUoM
 IZiFAJ9CIiEpHiBbnAhA0VOMGoaXHGULywCdED/5dNgVtc1C7y4avzETbEyWzD4=
 =CdMa
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2021.10' of https://source.denx.de/u-boot/custodians/u-boot-microblaze into next

Xilinx changes for v2021.10

clk:
- Add driver for Xilinx Clocking Wizard IP

fdt:
- Also record architecture in /fit-images

net:
- Fix plat/priv data handling in axi emac
- Add support for 10G/25G speeds

pca953x:
- Add missing dependency on i2c

serial:
- Fix dependencies for DEBUG uart for pl010/pl011
- Add setconfig option for cadence serial driver

watchdog:
- Add cadence wdt expire now function

zynq:
- Update DT bindings to reflect the latest state and descriptions

zynqmp:
- Update DT bindings to reflect the latest state and descriptions
- SPL: Add support for ECC DRAM initialization
- Fix R5 core 1 handling logic
- Enable firmware driver for mini configurations
- Enable secure boot, regulators, wdt
- Add support xck devices and 67dr
- Add psu init for sm/smk-k26 SOMs
- Add handling for MMC seq number via mmc_get_env_dev()
- Handle reserved memory locations
- Add support for u-boot.itb generation for secure OS
- Handle BL32 handoffs for secure OS
- Add support for 64bit addresses for u-boot.its generation
- Change eeprom handling via nvmem aliases
2021-07-01 08:57:23 -04:00
T Karthik Reddy
45576273e9 xilinx: zynqmp: Add support for 67dr silicon
Add zynqmp 67dr silicon to zynqmp device id table.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-07-01 09:25:06 +02:00
Tom Rini
8fba49bc8e Merge branch 'next' of https://source.denx.de/u-boot/custodians/u-boot-sh into next
- V3U Falcon board support
2021-06-28 18:32:07 -04:00
Tom Rini
6d0453d889 Prepare v2021.07-rc5
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAmDaJXgACgkQFHw5/5Y0
 tyySmwwAkW7GVAv+bXSd+8u1IsScl0QrSCoBdfHpdMcAME3gZmXqxClxskfbYJR/
 3IByQFlsn7j8HruR/49+etk0i0Pc4HNfynTLuAy+77/lh+h3Pnru/VPBhQqR7KW0
 NN5STn91QWLl74vRmx5wmEfSMhg7LTE1US8Rh6UXAd2dAiPd+hUawIR9D0Pq5Gzm
 nn7HvamDYspFUgSYYl8h1RtRQ9VqAFpnnPphpLkvX6323uCQwccXu5pnj1fLfGfj
 iO2Q+bDcwpEdUosox/LM1BdMoaSA+opOjk/e72y9V84+Jk6D+Jn5zQEpF5TJnTyI
 Yi2+NuJWS5xFWk1dnJrbGt0HpWM2oO12dZZ7eYy/FdsPJiWAS0ppRuxHVb868vjD
 ulca7acFPUjGyo3vBw1S0iVmPCBFGHBoyg3QLrUHYbpISeBeoa2w2cDxQl90ahw/
 TgRx+yutKfwkBPfILwDylNOgCGRwvLfroRyMEMiQ3gTSOCBmBX/yMv1k8tb9ZvPZ
 /WVsK6dw
 =F7x1
 -----END PGP SIGNATURE-----

Merge tag 'v2021.07-rc5' into next

Prepare v2021.07-rc5

# gpg: Signature made Mon 28 Jun 2021 03:39:36 PM EDT
# gpg:                using RSA key 1A3C7F70E08FAB1707809BBF147C39FF9634B72C
# gpg: Good signature from "Thomas Rini <trini@konsulko.com>" [ultimate]

# Conflicts:
#	configs/am64x_evm_r5_defconfig
2021-06-28 16:22:13 -04:00
Koji Matsuoka
cdaa69c46e ARM: renesas: Add GICv3 initialization for V3U Falcon
Init GICv3 for V3U Falcon in early phase

Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2021-06-24 20:22:18 +02:00
Koji Matsuoka
b3494132f0 ARM: renesas: Add generic timer initialization for V3U Falcon
Init the Generic Timer for V3U Falcon in early phase

Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2021-06-24 20:22:18 +02:00
Hai Pham
4cfdcf3948 ARM: renesas: Add R8A779A0 V3U Falcon board code
Add board code for the R8A779A0 V3U Falcon board.

Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
--
Marek: - various small rebase fixes and clean ups
2021-06-24 20:22:18 +02:00
Michal Simek
ce39ee28ec zynqmp: Do not place u-boot to reserved memory location
TF-A and SecureOS can allocate the part of DDR for self but U-Boot is not
handling this configuration that the part of memory is reserved and
shouldn't be used by U-Boot. That's why read all reserved memory locations
and don't use it.
The code was taken from commit 4a1b975dac ("board: stm32mp1: reserve
memory for OP-TEE in device tree") and commit 1419e5b516 ("stm32mp:
update MMU config before the relocation") which is used by stm32 and does
the job properly.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-06-23 09:48:35 +02:00
Michal Simek
476588c9b4 arm64: zynqmp: Handle MMC seq number based on boot device
K26 has EMMC and SD and default 0 is not working when system is booting out
of SD which is controller 1. Add controller autodetection via
mmc_get_env_dev(). The same code is used for distro_boot selection done in
board_late_init(). bootseq variable can't be reused because this is called
so late.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-06-23 09:48:35 +02:00
Michal Simek
02ac1553b8 arm64: zynqmp: Add psu_init_gpl for k26 boards
Add psu_init_gpl file for getting SPL to work directly from the tree.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-06-23 09:48:35 +02:00
Michal Simek
ddf8deabc3 arm64: zynqmp: Add support for SVD devices
SVDs  are using different name which can't be handled via zynqmp_devices
structure. That's why introduce zynqmp_detect_svd_name() which checks ID
code for these devices and show proper name for them.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-06-23 09:48:35 +02:00
Tom Rini
28afb71646 Merge tag 'u-boot-rockchip-20210618' of https://source.denx.de/u-boot/custodians/u-boot-rockchip into next
- New SoC platform support: rk3568;
- rockchip pcie Code compile issue fix;
- Board fix for rk3399 Khadas Edge;
- Add Rockchip NFC driver;
2021-06-19 08:20:12 -04:00
Patrick Delaunay
486808e354 board: stm32mp1: correct the property name for eth
Use the correct name for STMicroelectronics phys config properties,
replace '_' by '-':
  "st,eth_clk_sel" => "st,eth-clk-sel"
  "st,eth-ref-clk-sel" => st,eth-clk-sel"

These property name are aligned with the upstreamed Linux kernel binding:
 linux/Documentation/devicetree/bindings/net/stm32-dwmac.yaml

See Linux kernel commit "dt-bindings: net: stmmac: add phys config
properties" merged in v5.1-rc1.

This patch allow to reuse the kernel device tree directly in U-Boot.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-06-18 10:09:41 +02:00
Joseph Chen
695693b2d0 board: rockchip: Add rk3568 evb support
Add support for rk3568 evaluation board.

Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-06-18 14:36:24 +08:00
Tom Rini
a94b2aad05 First set of u-boot-atmel features for the 2021.10 cycle
-----BEGIN PGP SIGNATURE-----
 
 iQFQBAABCgA6FiEEqxhEmNJ6d7ZdeFLIHrMeAg6sL8gFAmDLD78cHGV1Z2VuLmhy
 aXN0ZXZAbWljcm9jaGlwLmNvbQAKCRAesx4CDqwvyLhSB/0UqOd+Ujf2meiHU9yr
 oOOCLxVTjTUfIZKLad/zwlj2Xqzsjs6XMawC95BgouvkQLmj/gwerRWcZPg9l7/X
 hvb9VJi+iJoLRRpBPbeF3bMb92kCE+YZodFXyutlcY+Z0ZB9755zoVgR6ccKfksd
 Xp2y8AFptfYQNZ1l0yb3lhm1261CldWALrGTjRpY2hQ8nEMbV8z6WUB1hAF9CECa
 PGbKaiqm9OdktwHsLy4cYFFCuzkykn6T3P6ODineP7IxgEgZKTfJClSTFGY9S0GQ
 kwd7K/7j0W3rI5NPknB+Fb4IFAaTs/oozR+5ml7j+2S3G5GXjSGx8zaSOmOZvpP3
 KxwN
 =/I5V
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-atmel-2021.10-a' of https://source.denx.de/u-boot/custodians/u-boot-atmel into next

First set of u-boot-atmel features for the 2021.10 cycle:

This feature set converts the boards pm9261 and pm9263 Ethernet support
to DM; enables hash command for all SAM boards; fixes the NAND pmecc
bit-flips correction; adds Falcon boot for sama5d3_xplained board; and
other minor adjustments.
2021-06-17 11:46:44 -04:00
Tom Rini
a298d4fbcd Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq
- fsl-qoriq: Bug fixes related pfe, eth, thermal node, vid.c, cpu release,
  mmc, usb, env, etc for Layerscape boards
- powerpc: Update Maintainers for some boards.
2021-06-17 08:44:56 -04:00
Priyanka Jain
b7efcaff8b board: freescale: t1028xrdb: Add MAINTAINER for revD
Add Priyanka Jain as MAINTAINER for
 T2080RDB_revD_defconfig,
 T2080RDB_revD_NAND_defconfig,
 T2080RDB_revD_SDCARD_defconfig and
 T2080RDB_revD_SPIFLASH_defconfig

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-17 12:52:54 +05:30
Camelia Groza
13ea307f79 board: freescale: t208xrdb: add a config option for rev D dts fixups
Under DM, we rely on u-boot's device tree to provide the correct PHY
addresses. The board_fix_fdt callback is intended to be used for
device tree fixups before relocation. Unfortunately, this isn't an
option when booting from flash since the device tree isn't writable
before relocation.

This patch introduces the CONFIG_T2080RDB_REV_D option to signal that a
board revision D or up is the target. The config option is used to set
the correct Aquantia PHY address in the board's u-boot device tree.

Defconfig files with the option enable explicitly are added for
convenience.

Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-17 11:46:11 +05:30
Camelia Groza
4e21a555c1 board: freescale: t208xrdb: add Linux fdt fix-ups for rev D
The T2080RDB boards revisions D and up have updated 10G Aquantia PHYs
connected to MAC1 and MAC2. The second Aquantia PHY is located at a
different address on the MDIO bus compared to rev C (0x8 instead of 0x1).

Fix-up the Linux device tree to update the PHY address for the second
Aquantia PHY on boards revisions D and up. Also rename the PHY node to
reflect the changes.

Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
[Rebased]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-17 11:46:11 +05:30
Camelia Groza
c91b130554 board: freescale: t208xrdb: detect the board revision version
Detect and print the board revision version based on the CPLD registers.

Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-17 11:46:11 +05:30
Camelia Groza
a484f7c486 board: freescale: t208xrdb: remove the legacy non-DM_ETH code
Both DM_ETH and DM_PCI are enabled for the T2080RDB board. Remove the
board_eth_init() callback and the non-DM_ETH code paths since they are not
needed anymore.

Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-17 11:46:11 +05:30
Aleksandar Gerasimovski
02802eb89e pg-wcom-ls102x: initialize front led and app buf
This patch adds the front led initialization and the application
buffer enable to the eraly board inititlaization.

Signed-off-by: Rainer Boschung <rainer.boschung@hitachi-powergrids.com>
Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-17 11:46:11 +05:30
Aleksandar Gerasimovski
fbb0e15a42 km/scripts: fix saveenv command syntax
This is most probably a typo, and in older u-uboot versions is same as
'saveenv', in the newer uboot versions there is a separate 'save' command
that is different from 'saveenv'.

Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-17 11:46:11 +05:30
Aleksandar Gerasimovski
3aea3ddf21 km/ls102xa: add support for u-boot POST memory test
From production view this is standard test executed during production on
all linux based foxmc cards.
On CENT2 HW defined memory region is zero means that some DDR accesses are
done by memory_post_dataline and memory_post_addrline but pattern tests
are skipped that's why mem_regions is fast there.

On ls102x for the complete DDR region of 1GiB memory_regions_post_test
takes approx. 4min and this is too much for production, so this patch
defines only 1MiB region as compromise.

Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-17 11:46:11 +05:30
Aleksandar Gerasimovski
a7fd6fa1c2 board/km: add support for expu1 design based on nxp
The EXPU1 design is a new 40G capable ethernet service unit card for
Hitachi-Powergrids wired-com product lines.

The base SoC is same as for already added SELI8 card, consequently the
already added u-boot support for SELI8 is reused.

Signed-off-by: Rainer Boschung <rainer.boschung@hitachi-powergrids.com>
Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com>
[Fixed new line error at EOF]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-17 11:46:11 +05:30
Priyanka Jain
0b036d4c1b board: freescale: t102xrdb: Add MAINTAINER
Add "Priyanka Jain <priyanka.jain@nxp.com>" as
MAINTAINER for t102xrdb board.

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-17 11:46:11 +05:30
Priyanka Jain
eccf98f8d8 board: freescale: p2041rdb: Add MAINTAINER
Add "Priyanka Jain <priyanka.jain@nxp.com>" as
MAINTAINER for p2041rdb board.

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-17 11:46:11 +05:30
Priyanka Jain
6d1657b998 board: freescale: p1_p2_rdb_pc: Add MAINTAINER
Add "Priyanka Jain <priyanka.jain@nxp.com>" as
MAINTAINER for p1_p2_rdb_pc board.

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-17 11:46:11 +05:30
Priyanka Jain
0eb946ec28 board: freescale: t4rdb: Add MAINTAINER
Add "Priyanka Jain <priyanka.jain@nxp.com>" as
MAINTAINER for t4rdb board.

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-17 11:46:11 +05:30
Aleksandar Gerasimovski
0753603e25 keymile: common: fix hexadecimal env variable format
Commit df86d32 breaks linux kernel and product application boot.

Linux kernel and our product application scripts are expecting 0x prefix
for hexadecimal values, while env_set_hex writes them without a prefix.

This patch partially revert env_set_hex usage for affected env variables.

Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-17 11:46:11 +05:30
Priyanka Singh
c0eeb730f8 board: freescale: vid.c: Add check for return value of adjust_vdd()
Add check for return value of adjust_vdd()

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Priyanka Singh <priyanka.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-17 11:46:11 +05:30
Sean Anderson
55dac94ab8 k210: Don't imply CCF
Now that the k210 clock driver does not depend on CCF, we should no longer
imply it (and probably should not have in the first place). We can also
reduce the pre-relocation malloc arena back to something sensible.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-06-17 09:40:58 +08:00
Tom Rini
b2c4b7f665 u-boot-imx-20210616
-------------------
 
 - imxrt : fixes, USB, imxrt1020-evk
 - imx8m:
 	fix for verdin-imx8mm
 	Add conga-QMX8 board
 - imx6 :
 	documentation for pico-imx6:
 	Add SeeedStudio NPI-IMX6ULL Support
 	ventana: DM PCI
 - imx7d:
 	added SMEGW01 board
 
 CI : https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/7765
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCYMoTAg8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76aaXgCfa0IWXD0nOT0xQ50aKZGD3fspahsAn3rfnviv
 HnrT4j7bdBRksuYJ15PR
 =NEGm
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20210616' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

u-boot-imx-20210616
-------------------

- imxrt : fixes, USB, imxrt1020-evk
- imx8m:
	fix for verdin-imx8mm
	Add conga-QMX8 board
- imx6 :
	documentation for pico-imx6:
	Add SeeedStudio NPI-IMX6ULL Support
	ventana: DM PCI
- imx7d:
	added SMEGW01 board

CI : https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/7765
2021-06-16 11:18:11 -04:00
Mian Yousaf Kaukab
864c3dbc0a ls1012a: net: pfe: remove pfe stop from bootcmd
When using bootefi to boot a EFI binary, u-boot is supposed to
provide networking service for EFI application. Currently, 'pfe stop'
command is called from bootcmd before running bootefi. As a result
network stops working for EFI applications and console is flooded with
"Rx pkt not on expected port" messages.

Implement board_quiesce_devices() for ls1012a boards and call
pfe_command_stop() from it instead of calling 'pfe stop' from
*_bootcmd and bootcmd.

Tested-by: Anji Jagarlmudi <anji.jagarlmudi@nxp.com>
Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
[Fixed checkpatch space error]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-16 18:14:08 +05:30
Pali Rohár
029bb91e80 arm: mvebu: turris_{omnia, mox}: ensure running bootcmd_rescue always works
One of the points of putting the rescue boot command into default
environment is that user can invoke it without physical access to the
board (without having to press the factory reset button), by running
  run bootcmd_rescue
in U-Boot's console.

Therefore we have to ensure that bootcmd_rescue is always set to default
value, regardless of whether the factory reset button was pressed.
Otherwise the variable will be empty for example after upgrade from
previous U-Boot.

Fixes: ec3784d626 ("arm: mvebu: turris_mox: add support for board rescue mode")
Fixes: 176c3e7760 ("arm: mvebu: turris_omnia: support invoking rescue boot from console")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-06-15 07:21:54 +02:00
Michael Opdenacker
ea83ea5afd board: sama5d3_xplained: add Falcon boot support
This supports Falcon boot support for Microchip SAMA5D3 Xplained,
tested on raw MMC, and on raw NAND.

spl_start_uboot() is has the simplest possible implementation.
It doesn't test the environment because enabling environment support
currently causes the SPL to exceed its maximum size (64 KiB).
It doesn't check the serial for incoming characters either because
this functionality currently doesn't seem to work from the SPL
on this board.

Settings for Falcon boot from at FAT partition are also added to
avoid compile failures when CONFIG_SPL_OS_BOOT is enabled, but this
particular case is currently not functional as adding FAT and
partition support cause the SPL to be too big again.

Signed-off-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
2021-06-14 12:28:03 +03:00
Tom Rini
c4737cd594 Xilinx changes for v2021.07-rc5
zynqmp:
 - Fix ANALOG_BUS value after powerup
 - Disable EFI_CAPSULE_ON_DISK_EARLY
 
 zynqmp-gqspi:
 - Fix write issue
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCYMNGPAAKCRDKSWXLKUoM
 IUCCAJ4lktDK3MTBAJUMHzKXvzt1jcuW6wCfQKuoQSETBDuy1LMXV6uxQXkrHJA=
 =IXXl
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2021.07-rc5' of https://source.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx changes for v2021.07-rc5

zynqmp:
- Fix ANALOG_BUS value after powerup
- Disable EFI_CAPSULE_ON_DISK_EARLY

zynqmp-gqspi:
- Fix write issue
2021-06-11 08:29:34 -04:00
Tero Kristo
c3ebc56e2d board: ti: j72xx: README: update build instructions and image formats
Update build instructions and image formats based on HSM rearch. A new
DM image is added into the build, which gets executed right after R5
SPL finishes its job.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tero Kristo <kristo@kernel.org>
2021-06-11 16:34:52 +05:30
Lokesh Vutla
481d394e77 common: fit: Update board_fit_image_post_process() to pass fit and node_offset
board_fit_image_post_process() passes only start and size of the image,
but type of the image is not passed. So pass fit and node_offset, to
derive information about image to be processed.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Tero Kristo <kristo@kernel.org>
2021-06-11 16:34:52 +05:30
Adrian Fiergolski
3414712ba8 arm64: zynqmp: Writing correct value to ANALOG_BUS
The default register configuration after powerup for PSSYSMON_ANALOG_BUS
register is incorrect. Hence, fix this in SPL by writing correct fixed
value. It follows UG1085 chapter 'PS SYSMON Analog_Bus' and reflects commit
sw_apps:zynq ("056ca65d44549ce27f716d423e8dfdefeee7440c")
in Xilinx:embeddedsw[1].

[1] https://github.com/Xilinx/embeddedsw

Signed-off-by: Adrian Fiergolski <adrian.fiergolski@fastree3d.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-06-11 09:24:58 +02:00
Marek Behún
45853413e2 arm: mvebu: turris_mox: start blinking PHY LEDs when entering rescue
Configure blinking on ethernet PHY LEDs on the MOX A board when entering
rescue mode via reset button.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-06-10 07:18:06 +02:00
Marek Behún
ec3784d626 arm: mvebu: turris_mox: add support for board rescue mode
Add necessary config options and board code to support board factory
reset / rescue mode on Turris MOX.

In order to also support invoking rescue mode from U-Boot console,
without having to press the factory reset button, put the rescue command
into `bootcmd_rescue` default environment variable. When factory reset
button is pressed, invoke rescue mode via distroboot by setting
`boot_targets` to `rescue`.

Rescue boot from console can be invoked by running
  run bootcmd_rescue

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-06-10 07:18:06 +02:00
Pali Rohár
e61a4ff13f Nokia RX-51: Enable CONFIG_WDT to remove deprecation warning
Also convert CONFIG_HW_WATCHDOG to CONFIG_WATCHDOG.

Signed-off-by: Pali Roh?r <pali@kernel.org>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Link: https://lore.kernel.org/r/20210309201915.16586-1-pali@kernel.org
2021-06-09 22:23:44 +05:30
Aswath Govindraju
397d7b0fae board: ti: am64x: Set the core voltage of USB PHY to 0.85V
Set the core voltage of USB PHY in AM64x to 0.85V in spl_board_init().

Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Link: https://lore.kernel.org/r/20210604163043.12811-5-a-govindraju@ti.com
2021-06-09 22:23:44 +05:30
Fabio Estevam
40496ac3b7 mx7d: Add Storopack's SMEGW01 board
Add support for Storopack's SMEGW01 board, which is an
IoT gateway based on the i.MX7D SoC.

Based on the original U-Boot work done by Phytec.

Signed-off-by: Fabio Estevam <festevam@denx.de>
2021-06-09 13:34:38 +02:00
Navin Sankar Velliangiri
a3a0bc85c0 imx: Add SeeedStudio NPI-IMX6ULL Support
CPU:   Freescale i.MX6ULL rev1.1 792 MHz (running at 396 MHz)
CPU:   Industrial temperature grade (-40C to 105C) at 49C
Reset cause: POR
Model: Seeed NPi iMX6ULL Dev Board with NAND
Board: Seeed NPi i.MX6ULL Dev Board
DRAM:  512 MiB
NAND:  512 MiB
MMC:   FSL_SDHC: 0
In:    serial@2020000
Out:   serial@2020000
Err:   serial@2020000
Net:   FEC0

Working:
- Eth0
- MMC/SD
- NAND
- UART 1
- USB host

Signed-off-by: Navin Sankar Velliangiri <navin@linumiz.com>

Note:

Changes in v2:

 * removed unnecessary space in imx6ull-seeed-npi-imx6ull-dev-board.dts file.
 * Used SZ_2M for CONFIG_SYS_MALLOC_LEN size allocation.
2021-06-09 13:34:18 +02:00
Oliver Graute
fe133eb192 imx: support for conga-QMX8 board
Add i.MX8QM qmx8 congatec board support

U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200)

CPU:   NXP i.MX8QM RevB A53 at 1200 MHz

Model: Congatec QMX8 Qseven series
Board: conga-QMX8
Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9
Boot:  SD2
DRAM:  6 GiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... OK
In:    serial@5a060000
Out:   serial@5a060000
Err:   serial@5a060000
switch to partitions #0, OK
mmc2 is current device
Net:
Error: ethernet@5b040000 address not set.
No ethernet found.

Hit any key to stop autoboot:  0

Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Ye Li <ye.li@nxp.com>
Cc: uboot-imx <uboot-imx@nxp.com>
2021-06-09 13:34:09 +02:00
Fabio Estevam
b8916306d1 pico-imx6: README: Fix the boot mode settings URL
The original URL that explains the boot mode setting is no longer
valid.

Update to the new one.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
2021-06-09 13:33:45 +02:00
Tim Harvey
cd18f1e6e6 imx: ventana: enable dm support for PCI and FEC ethernet
Enable driver model support for FEC ethernet which allows us to remove
the iomux and board_eth_init function. Replace the toggling of the ethernet
phy reset with dt configuration.

Enable driver model support for PCI which allows us to remove the
eth1000_initialize() call. Additionally enable PCI_INIT_R to scan for
PCI devices on init such as the e1000 that is present on the GW552x.

Convert board_pci_fixup to use dm callback and remove pcidisable env
variable which is not supported for DM_PCI and thus leave PCI always
enabled during init.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-06-09 13:33:35 +02:00
Oleh Kravchenko
1180baec98 Add EV-iMX280-NANO-X-MB board
A simple prototyping board with one microSD port, one Ethernet port,
2 USB ports, I2C, SPI, GPIO, and UART interfaces.

Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua>
Cc: Stefano Babic <sbabic@denx.de>
2021-06-09 13:32:49 +02:00
Oleh Kravchenko
3675ac081a Add out4.ru O4-iMX-NANO board
Board designed for quick prototyping and has one microSD port,
2 Ethernet ports, 2 USB ports, I2C, SPI, CAN, RS-485, GPIO,
UART interfaces, and 2 RGB LEDs.

Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua>
Cc: Stefano Babic <sbabic@denx.de>
2021-06-09 13:32:42 +02:00
Anatolij Gustschin
ac36dc7d19 brxre1: disable video after DM_VIDEO conversion deadline
The board was not converted to DM_VIDEO before deadline, so disable
video support for now.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2021-06-05 10:40:47 +02:00
Marek Behún
176c3e7760 arm: mvebu: turris_omnia: support invoking rescue boot from console
Make it possible to invoke rescue boot from U-Boot console, without
having to press the factory reset button. This is needed when accessing
the device remotely, for example.

Achieve this by putting rescue command into `bootcmd_rescue` default
environment variable and setting some distroboot environment variables
to their default values when the factory button is pressed.

Rescue boot from console can be invoked by running
  run bootcmd_rescue

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-06-04 11:32:41 +02:00
Marek Behún
0b5bb36d13 arm: mvebu: turris_omnia: update rescue mode boot command
Update rescue mode boot command on Turris Omnia. We are compressing the
image with lzma now.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-06-04 11:32:41 +02:00
Green Wan
70415e1e52 board: sifive: add HiFive Unmatched board support
Add defconfig and board support for HiFive Unmatched.

Signed-off-by: Green Wan <green.wan@sifive.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Rick Chen <rick@andestech.com>
2021-05-31 16:35:55 +08:00
Marek Vasut
5c54260130 ARM: stm32: Add additional ID register check for KSZ8851 presence
Currently the code sets eth1addr only if /ethernet1 alias exists in DT,
the node pointed to by the alias has "micrel,ks8851-mll" compatible
string, and the KSZ8851 CCR register read indicates programmed EEPROM
is not connected.

This is not sufficient to detect cases where the DT still contains the
KSZ8851 nodes, but the chip itself is not present. Extend the detection
to handle these cases.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-05-28 14:54:16 +02:00
Christoph Niedermaier
5c38c06ec0 ARM: stm32: Update dhelectronics/dh_stm32mp1/MAINTAINERS file
Adding new DH electronics mailing list.

Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-05-28 14:38:47 +02:00
Daniel Schwierzeck
5308a71db8 MIPS: remove deprecated qemu_mips board
Remove qemu_mips boards because DM migration doesn't make sense.
The board support for qemu_mips is already marked as deprecated
in Qemu in favour of the Malta board. Also qemu_mips support
has been removed from Linux a long time ago.

The official replacement is the Malta board. The same Malta U-Boot
image can be used with Qemu and on physical hardware.
All combinations of Big Endian and Little Endian as well as 32 bit
and 64 bit are supported.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-05-25 15:35:06 +02:00
Marek Behún
79dec66ca7 ARM: fix LTO for rockchip and samsung
When building with LTO, the compiler complains about type mismatch of
function usb_gadget_handle_interrupts(). This function is defined
without parameters in files
  arch/arm/mach-rockchip/board.c
  board/samsung/common/exynos5-dt.c
but it should have one parameter, int index.

Fix this.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-05-24 14:21:30 -04:00
Marek Behún
236f2ec432 treewide: Convert macro and uses of __section(foo) to __section("foo")
This commit does the same thing as Linux commit 33def8498fdd.

Use a more generic form for __section that requires quotes to avoid
complications with clang and gcc differences.

Remove the quote operator # from compiler_attributes.h __section macro.

Convert all unquoted __section(foo) uses to quoted __section("foo").
Also convert __attribute__((section("foo"))) uses to __section("foo")
even if the __attribute__ has multiple list entry forms.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-24 14:21:30 -04:00
Bin Meng
cc269e1c00 riscv: ae350: Switch to use binman to generate u-boot.itb
Use the new BINMAN_STANDALONE_FDT option for AE350 based SPL defconfigs,
so that binman is now used to generate u-boot.itb.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Rick Chen <rick@andestech.com>
2021-05-19 17:01:51 +08:00
Bin Meng
0784510f74 riscv: sifive: unleashed: Switch to use binman to generate u-boot.itb
At present SiFive Unleashed board uses the Makefile to create the FIT,
using USE_SPL_FIT_GENERATOR, which is deprecated as per the Makefile
warning. Update to use binman instead.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-19 17:01:50 +08:00
Sughosh Ganu
6a2e26b95f efi_loader: capsule: Remove the check for capsule_authentication_enabled environment variable
The current capsule authentication code checks if the environment
variable capsule_authentication_enabled is set, for authenticating the
capsule. This is in addition to the check for the config symbol
CONFIG_EFI_CAPSULE_AUTHENTICATE. Remove the check for the environment
variable. The capsule will now be authenticated if the config symbol
is set.

Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviwed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-05-18 12:36:12 +02:00
Konstantin Porotchkin
e1c55dfc7b arm: octeontx2: Add Octeon TX2 CN913x DB support
This patch adds the base support for the Marvell Octeon TX2 CN913x DB.
Only one defconfig is added with this patch. Other board variants are
available (NAND, MMC booting) and images for these boards can be
generated by following the documentation added in the included README.

Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2021-05-16 06:48:45 +02:00
Tom Rini
8054d80b04 Merge https://source.denx.de/u-boot/custodians/u-boot-sh 2021-05-14 23:00:24 -04:00
Sean Anderson
2d64e3829b riscv: k210: Rename airam to aisram
This is more consistent with the naming of other ram banks, and matches
what Linux is doing.

Reported-by: Damien Le Moal <Damien.LeMoal@wdc.com>
Signed-off-by: Sean Anderson <seanga2@gmail.com>
2021-05-14 16:20:49 +08:00
Sean Anderson
23058052de riscv: Enable AI ram on K210
We just need to initialize all the clocks pre-reloc. The clock driver
creates a bunch of devices, so we need to increase the pre-reloc malloc
arena.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
2021-05-14 16:20:49 +08:00
Kory Maincent
1569847e7c am335x: add support for cape detect functionality
Update the Kconfig and the board file to make the am335x board compatible
with cape detection.

Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
2021-05-13 13:09:09 -04:00
Kory Maincent
d705527a89 arm: am335x: add support for i2c2 bus
The am335x from BeagleBone use i2c EEPROM to detect capes.
The memory is wired to i2c bus 2 therefore it need to be enabled.

Add i2c2 clock, pinmux description and pinmux enable function.

Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
2021-05-13 13:09:09 -04:00
Kory Maincent
6c2c7e9cb9 arm: sunxi: add support for DIP detection to CHIP board
Add the extension_board_scan specific function to scan the information
of the EEPROM on one-wire and fill the extension struct.
Add the Kconfig symbol to enable the needs to detect DIPs.

Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Andre Przywara <andre.przywara@arm.com>
2021-05-13 13:09:09 -04:00
Kory Maincent
0705e25cd0 am57xx: add support for cape detect functionality
This commit enables using the extension board detection mechanism on
AM57xx based platforms.

Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
2021-05-13 13:09:09 -04:00
Kory Maincent
8c1d443206 ti/common: add support for extension_scan_board function
The BeagleBone platforms all use a common mechanism to discover and
identify extension boards (called "capes"): each extension board has an
I2C-connected EEPROM describing itself.

This patch implements a generic extension_scan_board() feature that can
be used by all BeagleBone platforms to read those I2C EEPROMs and fill
in the list of "extension" structures.

Following commits will enable this common logic on two BeagleBone
platforms.

Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
2021-05-13 13:09:09 -04:00
Kory Maincent
95300f203f pytest: add sandbox test for "extension" command
This commit extends the sandbox to implement a dummy
extension_board_scan() function and enables the extension command in
the sandbox configuration. It then adds a test that checks the proper
functionality of the extension command by applying two Device Tree
overlays to the sandbox Device Tree.

Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
[trini: Limit to running on sandbox]
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-05-13 13:09:09 -04:00
Ilko Iliev
4bf3a3fc39 board: pm9263: fix some typos in comments
Fix comment typos

Signed-off-by: Ilko Iliev <iliev@ronetix.at>
2021-05-13 09:55:05 +03:00
Ilko Iliev
8ad3a77a74 board: pm9263: switch to use DM_ETH
Enable CONFIG_DM_ETH in configs/pm9263_defconfig
Drop legacy initialization in board/ronetix/pm9263.c
Remove network related setting from include/configs/pm9263.h

Signed-off-by: Ilko Iliev <iliev@ronetix.at>
2021-05-13 09:55:04 +03:00
Ilko Iliev
f822b62c02 board: pm9261: remove network support
The network support is removed because there is
no DM for Davicom DM9000.

Signed-off-by: Ilko Iliev <iliev@ronetix.at>
2021-05-13 09:55:04 +03:00
Marek Vasut
8f76c9d73a ARM: renesas: Scrub duplicate memory nodes from DT on Gen3
Scrub duplicate /memory@* node entries here. Some R-Car DTs might
contain multiple /memory@* nodes, however fdt_fixup_memory_banks()
either generates single /memory node or updates the first /memory
node. Any remaining memory nodes are thus potential duplicates.

However, it is not possible to delete all the memory nodes right
away, since some of those might not be DRAM memory nodes, but some
sort of other memory. Thus, delete only the memory nodes which are
in the R-Car3 DBSC ranges.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2021-05-12 21:36:27 +02:00
Marek Vasut
bd83431ea3 ARM: rmobile: Add missing rcar-common/common.c to Beacon RZG2M kit
The rcar-common/common.c contains various common board functions shared
by all R-Car and RZG boards. This board is not compiling the file in, so
add it. This way, part of the board code can be de-duplicated too.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Adam Ford <aford173@gmail.com>
2021-05-12 21:36:27 +02:00
Tom Rini
ea184cbff9 Merge tag 'ti-v2021.07-rc3' of https://source.denx.de/u-boot/custodians/u-boot-ti
- Initial support for AM64 EVM and SK
- K3 DDR driver unification for J7 and AM64 platforms.
- Minor fixes for TI clock driver
2021-05-12 10:07:21 -04:00
Vignesh Raghavendra
ec658e7ee5 board: ti: am64x: Parse MAC address from board EEPROM
Parse MAC addresses from EEPROM and set them in the env. This is needed
to get MAC address for additional ethernet ports on the EVM.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2021-05-12 16:36:38 +05:30
Lokesh Vutla
7ecca0c43d configs: am64x_evm_a53: Enable support for reading eeprom
Enable relevant configs for reading eeprom data and updating env
variables.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-05-12 16:36:38 +05:30
Lokesh Vutla
63d825e9fc board: ti: am64x: Add support for detecting multiple device trees
Update the board_fit_config_name_match() to choose the right dtb.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-05-12 16:32:44 +05:30
Lokesh Vutla
8817c132a0 board: ti: am64x: Enable support for reading EEPROM in R5 SPL
Include the relevant configs to enable support for reading EEPROM in
R5SPL.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-05-12 16:32:44 +05:30
Lokesh Vutla
2ee76314a7 board: ti: am64x: Add support for reading eeprom data
I2C EEPROM data contains the board name and its revision.
Add support for:
- Reading EEPROM data and store a copy at end of SRAM
- Updating env variable with relevant board info
- Printing board info during boot.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-05-12 16:32:44 +05:30
Dave Gerlach
d411f0973a arm: mach-k3: am642: Add support for triggering ddr init from SPL
In SPL, DDR should be made available by the end of board_init_f()
so that apis in board_init_r() can use ddr. Adding support for
triggering DDR initialization from board_init_f().

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2021-05-12 16:31:16 +05:30
Dave Gerlach
db2438131d ram: k3-ddrss: Introduce top-level CONFIG_K3_DDRSS
Create a new CONFIG_K3_DDRSS option to select the common parts of the
k3-ddrss driver. Also introduce a choice that depends on the top level
option to select CONFIG_K3_J721E_DDRSS for j721e support, and update
corresponding Kconfig as required.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2021-05-12 16:30:52 +05:30
Dave Gerlach
55afd2d8f5 configs: am64x_evm_a53: Add Initial support
Add initial A53 defconfig support for AM64x SoCs.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2021-05-12 16:30:28 +05:30
Dave Gerlach
d480bd5edc configs: am64x_evm_r5: Add Initial support
Add initial R5 defconfig support for AM64x SoCs.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2021-05-12 16:30:28 +05:30
Dave Gerlach
33b7258947 board: ti: am64x: Add board support for am64x evm
Add board specific initialization for am64x based boards.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2021-05-12 16:27:57 +05:30
Tom Rini
59a2b9e605 u-boot-imx-20210502
-------------------
 
 - mx6:   fixes for Ventana
 -        local fixes from maintainer
 - imx7d: Ronetix's iMX7-CM
 - imx8:  Ronetix iMX8MQ-CM
 	 Engicam i.Core MX8M
 	 Compulab iot-gate-imx8
 - Fixes i.MX8 documentation
 - Fixes phy usage with fec
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCYJqX/Q8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76aACgCfYnzkeOHsKM6i9J6bdxIwwnU5NycAniDYksOG
 IT8LzFNHf0ECCj26S9mI
 =wVb3
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20210502' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

u-boot-imx-20210502
-------------------

- mx6:   fixes for Ventana
-        local fixes from maintainer
- imx7d: Ronetix's iMX7-CM
- imx8:  Ronetix iMX8MQ-CM
	 Engicam i.Core MX8M
	 Compulab iot-gate-imx8
- Fixes i.MX8 documentation
- Fixes phy usage with fec
2021-05-11 12:23:11 -04:00
Tom Rini
2684e082bc ppc: Remove some SECURE_BOOT defconfigs
These specific configs are missing a number of migrations.  In addition,
they are blocking completion of the now-expired DM_MMC migration as it
requires enabling BLK.

Cc: Priyanka Jain <priyanka.jain@nxp.com>
Cc: Ruchika Gupta <ruchika.gupta@nxp.com>
Cc: Sumit Garg <sumit.garg@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-05-11 09:14:56 -04:00
Ilko Iliev
7666cccf4f ARM:imx:imx8mq-cm: Add support for Ronetix iMX8MQ-CM
Supported peripherals: Ethernet, eMMC, Serial.

U-Boot SPL 2021.04-00911-g5fa1e2ffeb-dirty (Apr 23 2021 - 09:11:14
+0200)
Normal Boot
Trying to boot from MMC2

U-Boot 2021.04-00911-g5fa1e2ffeb-dirty (Apr 23 2021 - 09:11:14 +0200)

CPU:   Freescale i.MX8MQ rev2.1 at 1000 MHz
Reset cause: POR
Model: Ronetix iMX8M-CM SoM
DRAM:  1 GiB
WDT:   Started with servicing (60s timeout)
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
Loading Environment from MMC... OK
In:    serial
Out:   serial
Err:   serial
Net:
Warning: ethernet@30be0000 (eth0) using random MAC address -
42:0d:e7:78:da:53
eth0: ethernet@30be0000
Hit any key to stop autoboot:  0
u-boot=>

Signed-off-by: Ilko Iliev <iliev@ronetix.at>
2021-05-02 12:46:54 +02:00
Ilko Iliev
fdd2f359e4 imx: Add support for Ronetix's iMX7-CM board
Console boot log:

U-Boot SPL 2021.04-00836-ga6232e065d-dirty (Apr 16 2021 - 15:16:35 +0200)
Trying to boot from MMC1

U-Boot 2021.04-00836-ga6232e065d-dirty (Apr 16 2021 - 15:16:35 +0200)

CPU:   Freescale i.MX7D rev1.3 1000 MHz (running at 792 MHz)
CPU:   Commercial temperature grade (0C to 95C) at 44C
Reset cause: POR
Model: Ronetix iMX7-CM Board
Board: iMX7-CM
DRAM:  512 MiB
PMIC:  PFUZE3000 DEV_ID=0x30 REV_ID=0x11
MMC:   FSL_SDHC: 0, FSL_SDHC: 2
Loading Environment from MMC... OK
In:    serial
Out:   serial
Err:   serial
Net:
Warning: ethernet@30be0000 (eth0) using random MAC address - fe:be:37:01:5a:3f
eth0: ethernet@30be0000
Hit any key to stop autoboot:  0

Signed-off-by: Ilko Iliev <iliev@ronetix.at>
2021-05-02 12:46:54 +02:00
Priit Laes
f94ce9eb05 imx: imx8: Update README with somewhat correct firmware versions
Current setup instructions for i.MX8QM MEK board include somewhat
conflicting instructions, so here's an attempt to fix it.

After trying both sets of firmwares, I can conclude that both of
them fail to work:

- no boot at all with imx-sc-firmware-0.7 / firmware-imx-7.6

- partial success with imx-sc-firmware-1.1 / firmware-imx-8.0:

U-Boot 2021.04-rc3-00135-ge0669a43c8 (Mar 08 2021 - 16:49:08 +0200)

CPU:   NXP i.MX8QM RevB A53 at 1200 MHz

Model: Freescale i.MX8QM MEK
Board: iMX8QM MEK
mu_hal_receivemsg timeout
Build: SCFW 65afe5f6, SECO-FW 65afe5f6, ATF a-20190
mu_hal_receivemsg timeout
sc_misc_get_boot_dev: res:16
Boot:  SD0
DRAM:  mu_hal_sendmsg timeout
sc_rm_is_memreg_owned: mr:0 res:21
...

Signed-off-by: Priit Laes <priit.laes@paf.com>
2021-05-02 12:46:54 +02:00
Ying-Chun Liu (PaulLiu)
53b516c58d arm: imx8m: add support for Compulab iot-gate-imx8 (imx8mm-cl-iot-gate)
Add initial support for Compulab iot-gate-imx8 board (imx8mm-cl-iot-gate).
The initial support includes:
 - MMC
 - eMMC
 - I2C
 - FEC
 - Serial console

Signed-off-by: Kirill Kapranov <kirill.kapranov@compulab.co.il>
Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
Signed-off-by: Valentin Raevsky <valentin@compulab.co.il>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
Cc: Peter Robinson <pbrobinson@gmail.com>
2021-05-02 12:46:54 +02:00
Tim Harvey
1afa31a41e imx: ventana: add delay before reading EEPROM
fixes: d863d05439 ("imx: ventana: convert U-Boot to OF_CONTROL using FIT image")

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-05-02 12:46:54 +02:00
Jagan Teki
7e0daa924a board: imx8mm: Add Engicam i.Core MX8M Mini C.TOUCH 2.0
Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose Carrier
board.

Genaral features:
- Ethernet 10/100
- Wifi/BT
- USB Type A/OTG
- Audio Out
- CAN
- LVDS panel connector

i.Core MX8M Mini is an EDIMM SoM based on NXP i.MX8M Mini from Engicam.

i.Core MX8M Mini needs to mount on top of this Carrier board for
creating complete i.Core MX8M Mini C.TOUCH 2.0 board.

Linux dts commit details:

commit <a142252061ff> ("arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini
C.TOUCH 2.0")

Add support for it.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-05-02 12:46:54 +02:00
Jagan Teki
e3409a4cb7 board: imx8mm: Add Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit
Engicam EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive
Evaluation Board.

Genaral features:
- LCD 7" C.Touch
- microSD slot
- Ethernet 1Gb
- Wifi/BT
- 2x LVDS Full HD interfaces
- 3x USB 2.0
- 1x USB 3.0
- HDMI Out
- Mini PCIe
- MIPI CSI
- 2x CAN
- Audio Out

i.Core MX8M Mini is an EDIMM SoM based on NXP i.MX8M Mini from Engicam.

i.Core MX8M Mini needs to mount on top of this Evaluation board for
creating complete i.Core MX8M Mini EDIMM2.2 Starter Kit.

Linux dts commit details:

commit <051c08eea682> ("arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini
EDIMM2.2 Starter Kit")

Add support for it.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-05-02 12:46:54 +02:00
Sebastian Reichel
512bda95ed board: ge: bx50v3: fix crystal bit
The DA9063 enables the CRYSTAL bit by default, but there is no
crystal populated on the BA16 system on module. Without explicitly
clearing the CRYSTAL bit the system runs unstable and sometimes
reboots unexpectedly.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-05-02 12:46:54 +02:00
Tom Rini
f3a0d2c1af Xilinx changes for v2021.07-rc2
xilinx:
 - Enable saving variables based on bootmode
 - Cleanup usb dfu setup and wire it up with usb bootmode
 - Fix bootscript address logic
 - Remove GD references (spi, Versal)
 - Enable capsule update
 
 clk:
 - Small Kconfig fix
 
 net:
 - Fix gmii2rgmii bridge binding
 
 usb:
 - Propagate error (dfu gadget)
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCYIqrgAAKCRDKSWXLKUoM
 IY86AJ9X9G6IwfnhHFWhManDrzPoBGaSBwCfVjMzPQcCddlGAW8UJ1NaPCLPPNc=
 =ACHF
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2021.07-rc2' of https://source.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx changes for v2021.07-rc2

xilinx:
- Enable saving variables based on bootmode
- Cleanup usb dfu setup and wire it up with usb bootmode
- Fix bootscript address logic
- Remove GD references (spi, Versal)
- Enable capsule update

clk:
- Small Kconfig fix

net:
- Fix gmii2rgmii bridge binding

usb:
- Propagate error (dfu gadget)
2021-04-29 11:31:06 -04:00
Igal Liberman
2dbba24088 phy: marvell: rename comphy related definitions to COMPHY_XX
Currently, all comphy definitions are PHY_TYPE_XX and PHY_SPEEED_XX.
Those definition might be confused with MDIO PHY definitions.

This patch does the following changes:
 - PHY_TYPE_XX --> COMPHY_TYPE_XX
 - PHY_SPEED_XX --> COMPHY_SPEED_XX

This improves readability, no functional change.

Change-Id: I2bd1d9289ebbc5c16fa80f9870f797ea1bcaf5fa
Signed-off-by: Igal Liberman <igall@marvell.com>
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
2021-04-29 07:45:24 +02:00
Konstantin Porotchkin
c405226c34 arm: octeontx2: Add Octeon TX2 CN9130 CRB support
This patch adds the base support for the Marvell Octeon TX2 CN9130 CRB.
Not all interfaces are supported fully yet.

Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-29 07:45:13 +02:00
Stefan Roese
5d2d5c4f23 mips: octeon: Add Octeon III NIC23 board support
This patch adds the basic support for the PCIe target board equipped
with the Octeon III CN2350 SoC.

Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-28 10:05:12 +02:00
Aaron Williams
6a453e50c3 mips: octeon: octeon_ebb7304: Add board specific QLM init code
This patch adds the board specific QLM/DLM init code to the Octeon 3
EBB7304 board. The configuration of each port is read from the
environment exactly as done in the 2013 U-Boot version to keep the
board and it's configuration compatible.

Signed-off-by: Aaron Williams <awilliams@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-28 10:05:12 +02:00
Tom Rini
4dda435131 - MIPS: octeon: fix minor bugs of initial merge
- MIPS: octeon: add support for QLM and PCI-E controller
 - MIPS: octeon: add support for AHCI and SATA
 - MIPS: octeon: add E1000 ethernet support
 - MIPS: octeon: add Octeon III NIC23 board
 - ata/scsi: add support for Big Endian platforms
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiQkHUH+J02LLC9InKPlOlyTyXBgFAmCEf04ACgkQKPlOlyTy
 XBj2Aw//SxPX48XynT979cMIOoylO6Rs1saWtQr32YmycWnGC0/wvFNPU/kjNP/a
 jinOxvY2TSBNqToSuCDZxGXyijMIdAnWVCQCUXmah7bZ+GtiYWR0SHNO0TQ+qrBW
 06CC7hgQQqQswGClJe4njwTyVIzTQvyo/UdjS6RWggDZPsnGpyMlR5O56ZCNNH8o
 1XFCG8hSrQBRO38RpXciGS3dFeaqOQy96K9M5pellf9Fh5a+jHyAmK8Z/0R+T6cG
 +PoNh6qZAsXFj0PVuvu0CaXFHpP+fhdA4kEwt64PJCe8D3x7d05COuN0bL+e6D6u
 E4cSnkjmzNgYvoi4YAGaQN9f4PKPSMHuYf7YdIBFCQQ8OtxNXpUHOg0zr4SRnq/C
 ypq285f2O7Aq+3t0BrC7jTjo+Y2PzVIUR8MXpvh698ZSdJnqOlJf0y5tRwdhf/+k
 gh+rT7mWIOoRRWpb6qHMUr5gnparl0gOykspMlQ2NKB+kfmC4RP2pYxQFp82TFIq
 ZMUaXer2/g5dVptEhTU0vBsTrk7s/u239WtwyXpOCdoM6sI/FoMoiCoQoD2isKP6
 mUv/iwTpfNTtQnx5MM2Xsu+8pzcXjaVeoMaNcI55jZ2QTCoMAFA6odYTk+GHS3Vx
 Yt3TLrH6O46PXNSULROkmTR4RgiDHcGCX/HGTKkcA/+X9GDjjNc=
 =JwRN
 -----END PGP SIGNATURE-----

Merge tag 'mips-pull-2021-04-24' of https://source.denx.de/u-boot/custodians/u-boot-mips

- MIPS: octeon: fix minor bugs of initial merge
- MIPS: octeon: add support for QLM and PCI-E controller
- MIPS: octeon: add support for AHCI and SATA
- MIPS: octeon: add E1000 ethernet support
- MIPS: octeon: add Octeon III NIC23 board
- ata/scsi: add support for Big Endian platforms
2021-04-24 19:39:14 -04:00
Stefan Roese
ec85347102 mips: octeon: Add Octeon III NIC23 board support
This patch adds the basic support for the PCIe target board equipped
with the Octeon III CN2350 SoC.

Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-23 21:22:55 +02:00
Aaron Williams
f9fa8b8948 mips: octeon: octeon_ebb7304: Add board specific QLM init code
This patch adds the board specific QLM/DLM init code to the Octeon 3
EBB7304 board. The configuration of each port is read from the
environment exactly as done in the 2013 U-Boot version to keep the
board and it's configuration compatible.

Signed-off-by: Aaron Williams <awilliams@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-23 21:03:25 +02:00
T Karthik Reddy
25484d9070 xilinx: common: Fix boot script address
Currently u-boot supports addresses upto 39-bits only. If anybody
wants to use addresses of more than 39-bits in Linux they will have
a separate memory node in DT. In such cases they will have multiple
memory nodes.
Currently u-boot selects and runs on lower memory bank region.
But bootscript is being loaded on dram bank 0, where dram bank 0 will
point to 1st memory node in DT. If first memory node is mentioned as
higher ddr(>39-bits address) then u-boot cannot load the bootscript.
So fix this issue by setting bootscript address within the lower memory
bank region.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-04-23 08:45:55 +02:00
T Karthik Reddy
82cb49dc00 xilinx: versal: Add usb dfu/thor distro boot support
Change "dfu_usb" to "usb_dfu" for better representation and change
required macros. Add 60s timeout of dfu-utils to start transaction.
Add support for usb thor to distro boot. Remove DFU_ALT_INFO_RAM
as we use bootcmd_usb_dfu instead of dfu_ram.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-04-23 08:45:55 +02:00
T Karthik Reddy
ef1be3e364 xilinx: zynqmp: Add usb dfu/thor distro boot support
In usb boot mode distro boot should select usb device as primary boot
device instead of usb host. So make usb dfu as primary boot device. But do
not list it in boot_targets as fallback option because it is not classic
mode for booting. Using 60s timeout by default should be enough time for
dfu-utils to start transaction. In case none needs this please change
timeout value in the command or disable CONFIG_DFU_TIMEOUT.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-04-23 08:45:55 +02:00
Ashok Reddy Soma
4fb83c9c2b xilinx: versal: Add support for saving env based on bootmode
Enable saving variables to MMC(FAT) and SPI based on primary
bootmode. If bootmode is JTAG, dont save env anywhere(NOWHERE).

Enable ENV_FAT_DEVICE_AND_PART="0:auto" for Versal platforms as well.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-04-23 08:43:25 +02:00
Ashok Reddy Soma
cd08513b05 xilinx: zynq: Add support for saving env based on bootmode
Enable saving variables to MMC(FAT), NAND, SPI based on primary
bootmode. If bootmode is JTAG, dont save env anywhere(NOWHERE).

Since most of the flashes on zynq evaluation boards are 16MB in size,
set default ENV_OFFSET to 15MB(0xE00000).

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-04-23 08:43:18 +02:00
Peter Robinson
d410dc8802 ARM: imx: udoo_neo: Convert to ethernet DM
Convert the UDOO Neo to ethernet DM support.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: Francesco Montefoschi <francesco.montefoschi@udoo.org>
Cc: Breno Lima <breno.lima@nxp.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2021-04-20 13:31:35 -04:00
Peter Robinson
9db428904f ARM: imx: udoo_neo: convert to DM_MMC
Convert UDOO Neo to use DM MMC.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: Francesco Montefoschi <francesco.montefoschi@udoo.org>
Cc: Breno Lima <breno.lima@nxp.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2021-04-20 13:31:35 -04:00
Denys Drozdov
fd90aca329 toradex: configblock: fix module revision in config block
U-boot might display wrong module revision information
for modules with an assembly version 'K'. "cfgblock create"
does not takes into account all revision digits from PID8.

This fix takes into account all digits of PID8
to store module revision.

Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2021-04-20 07:31:12 -04:00
Andre Przywara
9f4b53436c arm: highbank: Update maintainership
Rob does not have access to any Calxeda systems anymore, also has
expressed a lack of interest in those systems in the past.

I have multiple working Midway nodes under my desk in the office, so
am happy to take over maintainership.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-04-20 07:31:12 -04:00
Andre Przywara
1238d0143a arm: highbank: Do DRAM init from DT
So far U-Boot was hard coding a (surely sufficient) memory size of 512
MB, even though all machines out there have at least 4GB of DRAM.
Since U-Boot uses its memory knowledge to populate the EFI memory map,
we are missing out here, at best losing everything beyond 4GB on Midway
boxes (which typically come with 8GB of DRAM).

Since the management processor populated the DT memory node already with
the detected DRAM size and configuration, we use that to populate
U-Boot's memory bank information, which is the base for the UEFI memory
map.
This finally allows us to get rid of the NR_DRAM_BANKS=0 hack, that we
had in place to avoid U-Boot messing up the DT memory node before
loading the kernel.

Also, to cover the whole of memory, we need to enable PHYS_64BIT.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-04-20 07:31:12 -04:00
Andre Przywara
debb07bf10 net: calxedagmac: Convert to DM_ETH
To squash that nasty warning message and make better use of the newly
gained OF_CONTROL feature, let's convert the calxedagmac driver to the
"new" driver model.
The conversion is pretty straight forward, mostly just adjusting the
use of the involved data structures.
The only actual change is the required split of the receive routine into
a receive and free_pkt part.
Also this allows us to get rid of the hardcoded platform information and
explicit init calls.

This also uses the opportunity to wrap the code decoding the MMIO
register base address, to make it safe for using PHYS_64BIT later.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-04-20 07:31:12 -04:00
Andre Przywara
109552d773 arm: highbank: Enable OF_CONTROL
All Calxeda machines are actually a poster book example of device tree
usage: the DT is loaded from flash by the management processor into
DRAM, the memory node is populated with the detected DRAM size and this
DT is then handed over to the kernel.
So it's a shame that U-Boot didn't participate in this chain, but
fortunately this is easy to fix:

Define CONFIG_OF_CONTROL and CONFIG_OF_BOARD, and provide a trivial
function to tell U-Boot about the (fixed) location of the DTB in DRAM.
Then enable DM_SERIAL, to let the PL011 driver pick up the UART platform
data from the DT. Also define AHCI, to bring this driver into the driver
model world as well.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-04-20 07:31:12 -04:00
Camelia Groza
8092e9d0e0 board: freescale: t208xrdb: fdt fixups under DM_ETH
Disable the FMan mEMAC 5 and 6 nodes from the fdt since they are not
available under the supported RCW. Also disable the associated
"fsl,dpa-ethernet" nodes that reference them.

This is a simplified version of the fdt_fixup_fman_ethernet call for
use under DM_ETH.

Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-04-15 14:26:21 +05:30
Michael Walle
9b3843f8f7 board: sl28: add config to enable console output on SER0
Sometimes it is desireable to have the console output on the first
serial line. Introduce a configuration option for it (in the board
scope).

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-04-15 14:22:22 +05:30
Simon Glass
8ff123a685 freescale: ls1021atwr: Drop use of CONFIG_RESET
It is not recommended to use CONFIG_xxx defines for things which are not
Kconfig options. Rename this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-04-15 14:22:17 +05:30
Bin Meng
b3398993ba ppc: qemu: Create a virtual memory mapping of the platform bus
QEMU ppce500 target can dynamically instantiate an eTSEC device on
a platform bus if "-device eTSEC" is given to QEMU. It is presented
as a "simple-bus" in the device tree, with an additional compatible
string "qemu,platform".

Let's create a virtual memory mapping for it in misc_init_r(), in
preparation to adding eTSEC support.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-04-15 14:22:17 +05:30
Aleksandar Gerasimovski
91ee54741e board/km: add support for seli8 design based on nxp ls102x
The SELI8 design is a new tdm service unit card for Hitachi-Powergrids
XMC and FOX product lines.

It is based on NXP LS1021 SoC and it provides following interfaces:
 - IFC interface for NOR, NAND and external FPGA's
 - 1 x RGMII ETH for debug purposes
 - 2 x SGMII ETH for management communication via back-plane
 - 1 x uQE HDLC for management communication via back-plane
 - 1 x I2C for peripheral devices
 - 1 x SPI for peripheral devices
 - 1 x UART for debug logging

It is foreseen that the design will be later re-used for another XMC and
FOX service cards with similar SoC requirements.

Signed-off-by: Rainer Boschung <rainer.boschung@hitachi-powergrids.com>
Signed-off-by: Matteo Ghidoni <matteo.ghidoni@hitachi-powergrids.com>
Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-04-15 14:22:17 +05:30
Asherah Connor
0219279381 qemu: arm: select QFW, MMIO on qemu-arm
Select CMD_QFW and QFW_MMIO in the qemu-arm board (covers arm and
arm64).

Signed-off-by: Asherah Connor <ashe@kivikakk.ee>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-04-12 17:45:40 -04:00
Asherah Connor
5b0b43e0e2 x86: qemu: move QFW to its own uclass
We move qfw into its own uclass and split the PIO functions into a
specific driver for that uclass.  The PIO driver is selected in the
qemu-x86 board config (this covers x86 and x86_64).

include/qfw.h is cleaned up and documentation added.

Signed-off-by: Asherah Connor <ashe@kivikakk.ee>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2021-04-12 17:44:55 -04:00
Peter Robinson
bedab97a21 Tegra: remove e2220-1170 board
It's an old bringup board with out upstream Linux or L4T support

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: Stephen Warren <swarren@nvidia.com>
Cc: Tom Warren <twarren@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
2021-04-12 17:17:11 -04:00
Jaehoon Chung
e316aa5858 board: warp: add power_max77696_init() function
Add power_max77696_init() function.
Since warp doesn't support DM, the keeping its code in board file is
better than maintainig the file of driver.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-04-12 14:24:33 -04:00
Tom Rini
d3cfc474b7 ppc: Remove MPC837XEMDS board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 14:33:35 -04:00
Tom Rini
a99dab1d33 ppc: Remove Cyrus_P5020 and P5040 boards
These boards have not been converted to CONFIG_DM_MMC by the deadline.
Remove them.  As the P5020 is the last ARCH_P5020 platform, remove that
support as well.

Cc: Andy Fleming <afleming@gmail.com>
Cc: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-04-10 08:05:07 -04:00
Tom Rini
a84ea228bc ppc: Remove controlcenterd boards
These boards have not been converted to CONFIG_DM_MMC by the deadline.
Remove them.

Cc: Mario Six <mario.six@gdsys.cc>
Cc: Dirk Eibach <dirk.eibach@gdsys.cc>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:04:55 -04:00
Tom Rini
7c964c3b93 ppc: Remove gdsys hrcon boards
These boards have not been converted to CONFIG_DM_MMC, along with other
DM conversions, by the deadline.  Remove them.

Cc: Dirk Eibach <dirk.eibach@gdsys.cc>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:04:42 -04:00
Tom Rini
ce4ca2b739 ppc: Remove gdsys strider boards
These boards have not been converted to CONFIG_DM_MMC, along with other
DM conversions, by the deadline.  Remove them.

Cc: Dirk Eibach <dirk.eibach@gdsys.cc>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:04:42 -04:00
Tom Rini
ddfb9aef65 ppc: Remove MPC8308RDB board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:04:42 -04:00
Tom Rini
2322b9568f ppc: Remove T2081QDS board and ARCH_T2081 support
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.  It is also the only ARCH_T2081 board so remove that support
as well.

Cc: Shengzhou Liu <Shengzhou.Liu@nxp.com>
Cc: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:04:42 -04:00
Tom Rini
4bbcec08eb arm: Remove mx6dlarm2 board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Jason Liu <jason.hui.liu@nxp.com>
Cc: Ye Li <ye.li@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:03:55 -04:00
Tom Rini
178d70b5b3 arm: Remove cgtqmx6eval board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:03:55 -04:00
Tom Rini
defd0dcfb9 arm: Remove titanium board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:03:55 -04:00
Tom Rini
80b386abe3 arm: Remove ts4800 board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Lucile Quirion <lucile.quirion@savoirfairelinux.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:03:55 -04:00
Tom Rini
4d24862848 arm: Remove mx53evk board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Jason Liu <jason.hui.liu@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:03:30 -04:00
Tom Rini
397a43dc56 arm: Remove pfla02 board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:03:30 -04:00
Tom Rini
a0cacddcaf arm: Remove zc5202 and zc5601 boards
These boards have not been converted to CONFIG_DM_MMC by the deadline.
Remove them.

Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:03:29 -04:00
Tom Rini
ddfc004009 arm: Remove xpress board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:02:03 -04:00
Tom Rini
b3b0680ec3 arm: Remove kc1 board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:01:24 -04:00
Tom Rini
6d426bb173 arm: Remove am3517_crane board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Nagendra T S  <nagendra@mistralsolutions.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:01:24 -04:00
Tom Rini
7db3958f07 arm: Remove omap3_ha board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Stefan Roese <sr@denx.de>
Cc: Tapani Utriainen <linuxfae@technexion.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:01:24 -04:00
Tom Rini
d137604c20 arm: Remove tricorder board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Thomas Weber <weber@corscience.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:01:24 -04:00
Tom Rini
96f599009a arm: Remove platinum_picon board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:01:10 -04:00
Tom Rini
da42646bf4 arm: Remove Broadcom Cygnus boards
These boards have not been converted to CONFIG_DM by the deadline.
Remove them.

Cc: Steve Rae <steve.rae@raedomain.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:01:09 -04:00
Tom Rini
938c174738 arm: Remove bcm23550_w1d board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Steve Rae <steve.rae@raedomain.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:01:09 -04:00
Tom Rini
0f6807e77b arm: Remove bcm28155_ap board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Steve Rae <steve.rae@raedomain.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:01:09 -04:00
Tom Rini
65a591f639 arm: Remove picosam9g45 board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Erik van Luijk <evanluijk@interact.nl>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:01:09 -04:00
Tom Rini
80c642f16d arm: Remove wb50n board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Ben Whitten <ben.whitten@lairdtech.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:01:09 -04:00
Tom Rini
3cb80c73a8 arm: Remove wb45n board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Ben Whitten <ben.whitten@lairdtech.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:01:09 -04:00
Tom Rini
d59bc09d82 arm: Remove bcm958712k board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:01:09 -04:00
Tom Rini
9ac8368071 arm: Remove s32v234evb board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Eddy Petrișor <eddy.petrisor@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:01:00 -04:00
Tom Rini
56124508ce arm: Remove secomx6quq7 board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:00:45 -04:00
Tom Rini
c6c26a05b8 arm: Remove vexpress_ca15_tc2 board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:00:12 -04:00
Tom Rini
4652bef1b6 arm: Remove apf27 board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Philippe Reynes <tremyfr@yahoo.fr>
Cc: Eric Jarrige <eric.jarrige@armadeus.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 07:59:35 -04:00
Tom Rini
be3dec48b0 arm: Remove ts4600 board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 07:59:35 -04:00
Tom Rini
0fa6bafa89 arm: Remove sc_sps_1 board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 07:59:34 -04:00
Tom Rini
b40186fc7e arm: Remove SANSA_FUZE_PLUS board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 07:59:34 -04:00
Tom Rini
539fba2c10 arm: Remove xfi3 board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 07:59:30 -04:00
Tom Rini
34af2da9ad ppc: Remove MPC8349ITX board
This board relies on using CONFIG_LIBATA but does not enable CONFIG_AHCI.  The
deadline for this conversion was the v2019.07 release.  The use of CONFIG_AHCI
requires CONFIG_DM.  The deadline for this conversion was v2020.01.  Remove
this board.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 07:58:22 -04:00
Tom Rini
c861d21cba arm: Remove ot1200 board
This board relies on using CONFIG_LIBATA but does not enable CONFIG_AHCI.  The
deadline for this conversion was the v2019.07 release.  In order to
convert to using the DWC SATA driver under DM further migrations are
required.

Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2021-04-10 07:57:42 -04:00
Tom Rini
d8d3b77fc2 arm: Remove dms-ba16 board
This board relies on using CONFIG_LIBATA but does not enable CONFIG_AHCI.  The
deadline for this conversion was the v2019.07 release.  The use of CONFIG_AHCI
requires CONFIG_DM.  The deadline for this conversion was v2020.01.  Remove
this board.

Cc: Akshay Bhat <akshaybhat@timesys.com>
Cc: Ken Lin <Ken.Lin@advantech.com.tw>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 07:57:29 -04:00
Tom Rini
3f2e3c7845 Add rt-thread art-pi board support based on STM32H750 SoC
Add Engicam i.Core STM32MP1 SoM
 Add FIP header support for STM32programmer
 Update uart number when no serial device found for STM32MP1
 Remove board_check_usb_power function when ADC flag is not set
 Update SPL size limitation for STM32MP1
 Set soc_type, soc_pkg, soc_rev env variables for STM32MP1
 -----BEGIN PGP SIGNATURE-----
 
 iQJQBAABCgA6FiEEXyrViUccKBz9c35Jysd4L3sz/6YFAmBwTr0cHHBhdHJpY2Uu
 Y2hvdGFyZEBmb3NzLnN0LmNvbQAKCRDKx3gvezP/plSwD/9SAhxTYqAblFZqZmJj
 Lu+F5fwuXXd8S5LwqNeIKULv+UhJngClkE4HdjSl6T0yR10v6YkPNRDVj4+1gzBd
 wZizmCsnqqDW0QGsTO5AVo+oTwhX4RHkvxEF7BjOqtVuoMZGiozE53+29QORHTnZ
 +j8CYAeORf9wvGAi5y+Wr8ICqP6HwPJPNlta4S8iYC867BM38R9evBqynlaZaWPE
 8FhaXwbAj9ZR9ifCiO+7ObgfXGDT63ejCecjE+539m3FWlBrn+/AWLsg4zF037Dw
 DcV324pnVFP4AIOVsuc9hF7luAYctoXQcNHt1QbD3gmWqPQAgpH8Llfq5cMyudza
 /m/112Y7fuLxO3F14DzZSj5l3ims0XG56Yg7zBwN6exDPr3iWA4UwTSH9lRJDnBq
 aJyvLfAFAvz+X15oePjrQrVp7c+6MigeY2nmhVCWV53Yrl+/TnnekQXlHJ3TsHED
 bPW5/LarLge18uACTZvLzYruIvDSU3INPP1W0vUu7YMDwuEp21K1GSspN7yA0yDK
 nrWXxmYJGVWanAEvW//zuuqUhxtNjAb/qIQl0UgjFN9cDT5vJZ7oY3nWOwP+0V2a
 o+qrRxBTWSVliOShYpfjyHRsASRna2QLLUNQaBeoUqZBKNnFvuw4LZzmqNvV+Idj
 +XWRCiSDJnf1zRrMwFLvZZ+UTQ==
 =4VxR
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20210409' of https://source.denx.de/u-boot/custodians/u-boot-stm

Add rt-thread art-pi board support based on STM32H750 SoC
Add Engicam i.Core STM32MP1 SoM
Add FIP header support for STM32programmer
Update uart number when no serial device found for STM32MP1
Remove board_check_usb_power function when ADC flag is not set
Update SPL size limitation for STM32MP1
Set soc_type, soc_pkg, soc_rev env variables for STM32MP1
2021-04-09 13:10:59 -04:00
Tom Rini
a1e95e3805 u-boot-imx-20210409
-------------------
 
 - Secure Boot :
 	- HAB for MX8M / MX7ULP
 	- CAAM fixes
 - Fixes for imxrt1020
 - Fixes for USDHC driver
 - Fixes for Toradex (Colibri / Apalis)
 - Switch to DM for several boards
 	- mx23 olinuxo
 	- usbarmory
 	- marsboard / riotboard
 	- Gateworks GW Ventana
 - NXP upstream patches (LPDDR / CAAM / HAB)
 
 CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/7089
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCYHA8Xg8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76aVbQCfb0Z+N836ZSAodyLa0t6FSHgKqfYAnRdrWQAv
 MNlGOmmpfHENtE75eSnd
 =g48D
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20210409' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

u-boot-imx-20210409
-------------------

- Secure Boot :
	- HAB for MX8M / MX7ULP
	- CAAM fixes
- Fixes for imxrt1020
- Fixes for USDHC driver
- Fixes for Toradex (Colibri / Apalis)
- Switch to DM for several boards
	- mx23 olinuxo
	- usbarmory
	- marsboard / riotboard
	- Gateworks GW Ventana
- NXP upstream patches (LPDDR / CAAM / HAB)

CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/7089
2021-04-09 10:08:52 -04:00
Patrick Delaunay
2214d5e54c stm32mp1: remove the board_check_usb_power function when ADC is not activated
Simplify the code of the function board_check_usb_power
based in CONFIG_ADC and adc_measurement; the function is removed by the
linker when the CONFIG_ADC is not activated.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-04-09 11:53:00 +02:00
Jagan Teki
0441b48570 board: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 7" OF
7" OF is a capacitive touch 7" Open Frame panel solutions with
- 7" AUO B101AW03 LVDS panel
- EDT, FT5526 Touch

MicroGEA STM32MP1 is a STM32MP157A based Micro SoM.

MicroDev 2.0 is a general purpose miniature carrier board with CAN,
LTE and LVDS panel interfaces.

MicroGEA STM32MP1 needs to mount on top of MicroDev 2.0 board with
pluged 7" OF for creating complete MicroGEA STM32MP1 MicroDev 2.0
7" Open Frame Solution board.

Linux dts commit details:

commit <1d278204cbaa> ("ARM: dts: stm32: Add Engicam MicroGEA STM32MP1
MicroDev 2.0 7" OF")

Add support for it.

Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-04-09 11:53:00 +02:00
Jagan Teki
fd4dc09a4c board: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 board
MicroDev 2.0 is a general purpose miniature carrier board with CAN,
LTE and LVDS panel interfaces.

Genaral features:
- Ethernet 10/100
- USB Type A
- Audio Out
- microSD
- LVDS panel connector
- Wifi/BT (option)
- UMTS LTE with sim connector (option)

MicroGEA STM32MP1 is a STM32MP157A based Micro SoM.

MicroGEA STM32MP1 needs to mount on top of this MicroDev 2.0 board
for creating complete MicroGEA STM32MP1 MicroDev 2.0 Carrier board.

Linux dts commit details:

commit <f838dae7afd0> ("ARM: dts: stm32: Add Engicam MicroGEA STM32MP1
MicroDev 2.0 board")

Add support for it.

Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-04-09 11:53:00 +02:00
Jagan Teki
b594ec89fb board: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0
Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose Carrier
board.

Genaral features:
- Ethernet 10/100
- Wifi/BT
- USB Type A/OTG
- Audio Out
- CAN
- LVDS panel connector

i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam.

i.Core STM32MP1 needs to mount on top of this Carrier board for
creating complete i.Core STM32MP1 C.TOUCH 2.0 board.

Linux dts commit details:

commit <6ca2898df59f> ("ARM: dts: stm32: Add Engicam i.Core STM32MP1
C.TOUCH 2.0")

Add support for it.

Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-04-09 11:53:00 +02:00
Jagan Teki
30edf40fa8 board: stm32: Add Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit
Engicam EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive
Evaluation Board.

Genaral features:
- LCD 7" C.Touch
- microSD slot
- Ethernet 1Gb
- Wifi/BT
- 2x LVDS Full HD interfaces
- 3x USB 2.0
- 1x USB 3.0
- HDMI Out
- Mini PCIe
- MIPI CSI
- 2x CAN
- Audio Out

i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam.

i.Core STM32MP1 needs to mount on top of this Evaluation board for
creating complete i.Core STM32MP1 EDIMM2.2 Starter Kit.

Linux dts commit details:

commit <adc0496104b6> ("ARM: dts: stm32: Add Engicam i.Core STM32MP1
EDIMM2.2 Starter Kit")

Add support for it.

Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-04-09 11:53:00 +02:00
dillon min
38ac6a1bb3 board: Add rt-thread art-pi board support
All these files are add for support rt-thread art-pi board
- add board/st/stm32h750-art-pi, defconfig, header support for u-boot

for more information about art-pi, please goto:
https://art-pi.gitee.io/website/

Signed-off-by: dillon min <dillon.minfei@gmail.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-04-09 11:53:00 +02:00
Fabio Estevam
c174c0623b pico-imx6ul: Pass the PMIC I2C address in pmic_get()
Pass "pfuze3000@8" in pmic_get() so that the PMIC node can
be found in the devicetree.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-04-08 23:59:50 +02:00
Trevor Woerner
52bbcc340a mx23_olinuxino: convert MMC to driver model
Convert the Olimex Olinuxino board's support for MMC to driver model following
Fabio Estevam's excellent example from:

	commit: 23013aa961:
	mx23evk: Convert to driver model

Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2021-04-08 23:59:50 +02:00
Peter Robinson
dec7755c44 ARM: imx: udoo: convert to DM_ETH
Convert the UDOO board to use DM_ETH.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2021-04-08 20:29:54 +02:00
Peter Robinson
2d0401b118 ARM: imx: udoo: Convert block devices to DM
Enable DM block, DM MMC and DM SATA support on iMX6 Udoo
convert board code to match the DM support.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2021-04-08 20:29:54 +02:00
Peter Robinson
2668e28213 ARM: embestmx6boards: convert mars/riot boards to DM_ETH
Convert the boards to use DM_ETH.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: "Eric Bénard" <eric@eukrea.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2021-04-08 20:29:54 +02:00
Peter Robinson
c32d240f70 ARM: embestmx6boards: convert the mars/riot boards to DM_MMC
Convert the two Embest boards to use DM MMC.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: "Eric Bénard" <eric@eukrea.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2021-04-08 20:29:54 +02:00
Giulio Benetti
6bd8845ad4 board: st: stm32f746-disco: fix console is not enabled while init dram
While initializing dram in spl_dram_init(), mdelay() is called that in
order calls get_ticks() that  verifies if timer exists, if doesn't, it
throws a panic(), but since preloader_console_init() has still not been
called those panic()s will fail. This doesn't help debugging, so let's
setup console before calling spl_dram_init() by moving it after
spl_dram_init().

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2021-04-08 20:29:54 +02:00
Giulio Benetti
eeb47ee474 board: freescale: imxrt1050-evk: fix console is not enabled while init dram
While initializing dram in spl_dram_init(), mdelay() is called that in
order calls get_ticks() that  verifies if timer exists, if doesn't, it
throws a panic(), but since preloader_console_init() has still not been
called those panic()s will fail. This doesn't help debugging, so let's
setup console before calling spl_dram_init() by moving it after
spl_dram_init().

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2021-04-08 20:29:53 +02:00
Giulio Benetti
45dae4a3c7 board: freescale: imxrt1020-evk: fix console is not enabled while init dram
While initializing dram in spl_dram_init(), mdelay() is called that in
order calls get_ticks() that  verifies if timer exists, if doesn't, it
throws a panic(), but since preloader_console_init() has still not been
called those panic()s will fail. This doesn't help debugging, so let's
setup console before calling spl_dram_init() by moving it after
spl_dram_init().

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2021-04-08 20:29:53 +02:00