# Objective
- Fixes#10695
## Solution
Fixed obvious blunder in `PartialEq` implementation for
`UntypedAssetId`'s where the `TypeId` was not included in the
comparison. This was not picked up in the unit tests I added because
they only tested over a single asset type.
# Objective
- I've been experimenting with different patterns to try and make async
tasks more convenient. One of the better ones I've found is to return a
command queue to allow for deferred &mut World access. It can be
convenient to check for task completion in a normal system, but it is
hard to do something with the command queue after getting it back. This
pr adds a `append` to Commands. This allows appending the returned
command queue onto the system's commands.
## Solution
- I edited the async compute example to use the new `append`, but not
sure if I should keep the example changed as this might be too
opinionated.
## Future Work
- It would be very easy to pull the pattern used in the example out into
a plugin or a external crate, so users wouldn't have to add the checking
system.
---
## Changelog
- add `append` to `Commands` and `CommandQueue`
# Objective
Enables warning on `clippy::undocumented_unsafe_blocks` across the
workspace rather than only in `bevy_ecs`, `bevy_transform` and
`bevy_utils`. This adds a little awkwardness in a few areas of code that
have trivial safety or explain safety for multiple unsafe blocks with
one comment however automatically prevents these comments from being
missed.
## Solution
This adds `undocumented_unsafe_blocks = "warn"` to the workspace
`Cargo.toml` and fixes / adds a few missed safety comments. I also added
`#[allow(clippy::undocumented_unsafe_blocks)]` where the safety is
explained somewhere above.
There are a couple of safety comments I added I'm not 100% sure about in
`bevy_animation` and `bevy_render/src/view` and I'm not sure about the
use of `#[allow(clippy::undocumented_unsafe_blocks)]` compared to adding
comments like `// SAFETY: See above`.
# Objective
First, some terminology:
- **Minor radius**: The radius of the tube of a torus, i.e. the
"half-thickness"
- **Major radius**: The distance from the center of the tube to the
center of the torus
- **Inner radius**: The radius of the hole (if it exists), `major_radius
- minor_radius`
- **Outer radius**: The radius of the overall shape, `major_radius +
minor_radius`
- **Ring torus**: The familiar donut shape with a hole in the center,
`major_radius > minor_radius`
- **Horn torus**: A torus that doesn't have a hole but also isn't
self-intersecting, `major_radius == minor_radius`
- **Spindle torus**: A self-intersecting torus, `major_radius <
minor_radius`
Different tori from [Wikipedia](https://en.wikipedia.org/wiki/Torus),
where *R* is the major radius and *r* is the minor radius:
Currently, Bevy's torus is represented by a `radius` and `ring_radius`.
I believe these correspond to the outer radius and minor radius, but
they are rather confusing and inconsistent names, and they make the
assumption that the torus always has a ring.
I also couldn't find any other big engines using this representation;
[Godot](https://docs.godotengine.org/en/stable/classes/class_torusmesh.html)
and [Unity
ProBuilder](https://docs.unity3d.com/Packages/com.unity.probuilder@4.0/manual/Torus.html)
use the inner and outer radii, while
[Unreal](https://docs.unrealengine.com/5.3/en-US/BlueprintAPI/GeometryScript/Primitives/AppendTorus/)
uses the minor and major radii.
[Blender](https://docs.blender.org/manual/en/latest/modeling/meshes/primitives.html#torus)
supports both, but defaults to minor/major.
Bevy's `Torus` primitive should have an efficient, consistent, clear and
flexible representation, and the current `radius` and `ring_radius`
properties are not ideal for that.
## Solution
Change `Torus` to be represented by a `minor_radius` and `major_radius`.
- Mathematically correct and consistent
- Flexible, not restricted to ring tori
- Computations and conversions are efficient
- `inner_radius = major_radius - minor_radius`
- `outer_radius = major_radius + minor_radius`
- Mathematical formulae for things like area and volume rely on the
minor and major radii, no conversion needed
Perhaps the primary issue with this representation is that "minor
radius" and "major radius" are rather mathematical, and an inner/outer
radius can be more intuitive in some cases. However, this can be
mitigated with constructors and helpers.
# Objective
Make the impl block for RemovedSystem generic so that the methods can be
called for systems that have inputs or outputs.
## Solution
Simply adding generics to the impl block.
# Objective
Adds `.entry` to `EntityWorldMut` with `Entry`, `OccupiedEntry` and
`VacantEntry` for easier in-situ modification, based on `HashMap.entry`.
Fixes#10635
## Solution
This adds the `entry` method to `EntityWorldMut` which returns an
`Entry`. This is an enum of `OccupiedEntry` and `VacantEntry` and has
the methods `and_modify`, `insert_entry`, `or_insert`, `or_insert_with`
and `or_default`. The only difference between `OccupiedEntry` and
`VacantEntry` is the type, they are both a mutable reference to the
`EntityWorldMut` and a marker for the component type, `HashMap` also
stores things to make it quicker to access the data in `OccupiedEntry`
but I wasn't sure if we had anything it would be logical to store to
make accessing/modifying the component faster? As such, the differences
are that `OccupiedEntry` assumes the entity has the component (because
nothing else can have an `EntityWorldMut` so it can't be changed outside
the entry api) and has different methods.
All the methods are based very closely off `hashbrown::HashMap` (because
its easier to read the source of) with a couple of quirks like
`OccupiedEntry.insert` doesn't return the old value because we don't
appear to have an api for mem::replacing components.
---
## Changelog
- Added a new function `EntityWorldMut.entry` which returns an `Entry`,
allowing easier in-situ modification of a component.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Pascal Hertleif <killercup@gmail.com>
# Objective
- Fixes#10629
- `UntypedAssetId` and `AssetId` (along with `UntypedHandle` and
`Handle`) do not hash to the same values when pointing to the same
`Asset`. Additionally, comparison and conversion between these types
does not follow idiomatic Rust standards.
## Solution
- Added new unit tests to validate/document expected behaviour
- Added trait implementations to make working with Un/Typed values more
ergonomic
- Ensured hashing and comparison between Un/Typed values is consistent
- Removed `From` trait implementations that panic, and replaced them
with `TryFrom`
---
## Changelog
- Ensured `Handle::<A>::hash` and `UntypedHandle::hash` will produce the
same value for the same `Asset`
- Added non-panicing `Handle::<A>::try_typed`
- Added `PartialOrd` to `UntypedHandle` to match `Handle<A>` (this will
return `None` for `UntypedHandles` for differing `Asset` types)
- Added `TryFrom<UntypedHandle>` for `Handle<A>`
- Added `From<Handle<A>>` for `UntypedHandle`
- Removed panicing `From<Untyped...>` implementations. These are
currently unused within the Bevy codebase, and shouldn't be used
externally, hence removal.
- Added cross-implementations of `PartialEq` and `PartialOrd` for
`UntypedHandle` and `Handle<A>` allowing direct comparison when
`TypeId`'s match.
- Near-identical changes to `AssetId` and `UntypedAssetId`
## Migration Guide
If you relied on any of the panicing `From<Untyped...>` implementations,
simply call the existing `typed` methods instead. Alternatively, use the
new `TryFrom` implementation instead to directly expose possible
mistakes.
## Notes
I've made these changes since `Handle` is such a fundamental type to the
entire `Asset` ecosystem within Bevy, and yet it had pretty unclear
behaviour with no direct testing. The fact that hashing untyped vs typed
versions of the same handle would produce different values is something
I expect to cause a very subtle bug for someone else one day.
I haven't included it in this PR to avoid any controversy, but I also
believe the `typed_unchecked` methods should be removed from these
types, or marked as `unsafe`. The `texture_atlas` example currently uses
it, and I believe it is a bad choice. The performance gained by not
type-checking before conversion would be entirely dwarfed by the act of
actually loading an asset and creating its handle anyway. If an end user
is in a tight loop repeatedly calling `typed_unchecked` on an
`UntypedHandle` for the entire runtime of their application, I think the
small performance drop caused by that safety check is ~~a form of cosmic
justice~~ reasonable.
# Objective
- Standardize fmt for toml files
## Solution
- Add [taplo](https://taplo.tamasfe.dev/) to CI (check for fmt and diff
for toml files), for context taplo is used by the most popular extension
in VScode [Even Better
TOML](https://marketplace.visualstudio.com/items?itemName=tamasfe.even-better-toml
- Add contribution section to explain toml fmt with taplo.
Now to pass CI you need to run `taplo fmt --option indent_string=" "` or
if you use vscode have the `Even Better TOML` extension with 4 spaces
for indent
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
## Objective
- Give all the intuitive groups of gizmos their own file
- don't be a breaking change
- don't change Gizmos interface
- eventually do arcs too
- future types of gizmos should be in their own files
- see also https://github.com/bevyengine/bevy/issues/9400
## Solution
- Moved `gizmos.circle`, `gizmos.2d_circle`, and assorted helpers into
`circles.rs`
- Can also do arcs in this MR if y'all want; just figured I should do
one thing at a time.
## Changelog
- Changed
- `gizmos::CircleBuilder` moved to `gizmos::circles::Circle2dBuilder`
- `gizmos::Circle2dBuilder` moved to `gizmos::circles::Circle2dBuilder`
## Migration Guide
- change `gizmos::CircleBuilder` to `gizmos::circles::Circle2dBuilder`
- change `gizmos::Circle2dBuilder` to `gizmos::circles::Circle2dBuilder`
---------
Co-authored-by: François <mockersf@gmail.com>
# Objective
This PR adds some helpers for `Triangle2d` to work with its winding
order. This could also be extended to polygons (and `Triangle3d` once
it's added).
## Solution
- Add `WindingOrder` enum with `Clockwise`, `Counterclockwise` and
`Invalid` variants
- `Invalid` is for cases where the winding order can not be reliably
computed, i.e. the points lie on a single line and the area is zero
- Add `Triangle2d::winding_order` method that uses a signed surface area
to determine the winding order
- Add `Triangle2d::reverse` method that reverses the winding order by
swapping the second and third vertices
The API looks like this:
```rust
let mut triangle = Triangle2d::new(
Vec2::new(0.0, 2.0),
Vec2::new(-0.5, -1.2),
Vec2::new(-1.0, -1.0),
);
assert_eq!(triangle.winding_order(), WindingOrder::Clockwise);
// Reverse winding order
triangle.reverse();
assert_eq!(triangle.winding_order(), WindingOrder::Counterclockwise);
```
I also added tests to make sure the methods work correctly. For now,
they live in the same file as the primitives.
## Open questions
- Should it be `Counterclockwise` or `CounterClockwise`? The first one
is more correct but perhaps a bit less readable. Counter-clockwise is
also a valid spelling, but it seems to be a lot less common than
counterclockwise.
- Is `WindingOrder::Invalid` a good name? Parry uses
`TriangleOrientation::Degenerate`, but I'm not a huge fan, at least as a
non-native English speaker. Any better suggestions?
- Is `WindingOrder` fine in `bevy_math::primitives`? It's not specific
to a dimension, so I put it there for now.
# Objective
Fix the `bevy_asset/file_watcher` feature in practice depending on
multithreading, while not informing the user of it.
**As I understand it** (I didn't check it), the file watcher feature
depends on spawning a concurrent thread to receive file update events
from the `notify-debouncer-full` crate. But if multithreading is
disabled, that thread will never have time to read the events and
consume them.
- Fixes#10573
## Solution
Add a `compile_error!` causing compilation failure if `file_watcher` is
enabled while `multi-threaded` is disabled.
This is considered better than adding a dependency on `multi-threaded`
on the `file_watcher`, as (according to @mockersf) toggling on/off
`multi-threaded` has a non-zero chance of changing behavior. And we
shouldn't implicitly change behavior. A compilation failure prevents
compilation of code that is invalid, while informing the user of the
steps needed to fix it.
# Objective
- Sometimes it's very useful to know if a `Transform` contains any `NaN`
or infinite values. It's a bit boiler-plate heavy to check translation,
rotation and scale individually.
## Solution
- Add a new method `is_finite` that returns true if, and only if
translation, rotation and scale all are finite.
- It's a natural extension of `Quat::is_finite`, and `Vec3::is_finite`,
which return true if, and only if all their components' `is_finite()`
returns true.
---
## Changelog
- Added `Transform::is_finite`
# Objective
The `map_async` method involves a type `BufferAsyncError`:
https://docs.rs/bevy/latest/bevy/render/render_resource/struct.BufferSlice.html#method.map_async
This type is not re-exported in Bevy, so if a user wants to store a
struct involving this type they have to add wgpu manually to their
manifest.
## Solution
- Re-export wgpu::BufferAsyncError
---
## Changelog
### Added
- Re-export wgpu::BufferAsyncError
Signed-off-by: Torstein Grindvik <torstein.grindvik@muybridge.com>
Co-authored-by: Torstein Grindvik <torstein.grindvik@muybridge.com>
# Objective
- Fix adding `#![allow(clippy::type_complexity)]` everywhere. like #9796
## Solution
- Use the new [lints] table that will land in 1.74
(https://doc.rust-lang.org/nightly/cargo/reference/unstable.html#lints)
- inherit lint to the workspace, crates and examples.
```
[lints]
workspace = true
```
## Changelog
- Bump rust version to 1.74
- Enable lints table for the workspace
```toml
[workspace.lints.clippy]
type_complexity = "allow"
```
- Allow type complexity for all crates and examples
```toml
[lints]
workspace = true
```
---------
Co-authored-by: Martín Maita <47983254+mnmaita@users.noreply.github.com>
# Objective
- Follow up on https://github.com/bevyengine/bevy/pull/10519, diving
deeper into optimising `Entity` due to the `derive`d `PartialOrd`
`partial_cmp` not being optimal with codegen:
https://github.com/rust-lang/rust/issues/106107
- Fixes#2346.
## Solution
Given the previous PR's solution and the other existing LLVM codegen
bug, there seemed to be a potential further optimisation possible with
`Entity`. In exploring providing manual `PartialOrd` impl, it turned out
initially that the resulting codegen was not immediately better than the
derived version. However, once `Entity` was given `#[repr(align(8)]`,
the codegen improved remarkably, even more once the fields in `Entity`
were rearranged to correspond to a `u64` layout (Rust doesn't
automatically reorder fields correctly it seems). The field order and
`align(8)` additions also improved `to_bits` codegen to be a single
`mov` op. In turn, this led me to replace the previous
"non-shortcircuiting" impl of `PartialEq::eq` to use direct `to_bits`
comparison.
The result was remarkably better codegen across the board, even for
hastable lookups.
The current baseline codegen is as follows:
https://godbolt.org/z/zTW1h8PnY
Assuming the following example struct that mirrors with the existing
`Entity` definition:
```rust
#[derive(Clone, Copy, Eq, PartialEq, PartialOrd, Ord)]
pub struct FakeU64 {
high: u32,
low: u32,
}
```
the output for `to_bits` is as follows:
```
example::FakeU64::to_bits:
shl rdi, 32
mov eax, esi
or rax, rdi
ret
```
Changing the struct to:
```rust
#[derive(Clone, Copy, Eq)]
#[repr(align(8))]
pub struct FakeU64 {
low: u32,
high: u32,
}
```
and providing manual implementations for `PartialEq`/`PartialOrd`/`Ord`,
`to_bits` now optimises to:
```
example::FakeU64::to_bits:
mov rax, rdi
ret
```
The full codegen example for this PR is here for reference:
https://godbolt.org/z/n4Mjx165a
To highlight, `gt` comparison goes from
```
example::greater_than:
cmp edi, edx
jae .LBB3_2
xor eax, eax
ret
.LBB3_2:
setne dl
cmp esi, ecx
seta al
or al, dl
ret
```
to
```
example::greater_than:
cmp rdi, rsi
seta al
ret
```
As explained on Discord by @scottmcm :
>The root issue here, as far as I understand it, is that LLVM's
middle-end is inexplicably unwilling to merge loads if that would make
them under-aligned. It leaves that entirely up to its target-specific
back-end, and thus a bunch of the things that you'd expect it to do that
would fix this just don't happen.
## Benchmarks
Before discussing benchmarks, everything was tested on the following
specs:
AMD Ryzen 7950X 16C/32T CPU
64GB 5200 RAM
AMD RX7900XT 20GB Gfx card
Manjaro KDE on Wayland
I made use of the new entity hashing benchmarks to see how this PR would
improve things there. With the changes in place, I first did an
implementation keeping the existing "non shortcircuit" `PartialEq`
implementation in place, but with the alignment and field ordering
changes, which in the benchmark is the `ord_shortcircuit` column. The
`to_bits` `PartialEq` implementation is the `ord_to_bits` column. The
main_ord column is the current existing baseline from `main` branch.
My machine is not super set-up for benchmarking, so some results are
within noise, but there's not just a clear improvement between the
non-shortcircuiting implementation, but even further optimisation taking
place with the `to_bits` implementation.
On my machine, a fair number of the stress tests were not showing any
difference (indicating other bottlenecks), but I was able to get a clear
difference with `many_foxes` with a fox count of 10,000:
Test with `cargo run --example many_foxes --features
bevy/trace_tracy,wayland --release -- --count 10000`:
On avg, a framerate of about 28-29FPS was improved to 30-32FPS. "This
trace" represents the current PR's perf, while "External trace"
represents the `main` branch baseline.
## Changelog
Changed: micro-optimized Entity align and field ordering as well as
providing manual `PartialOrd`/`Ord` impls to help LLVM optimise further.
## Migration Guide
Any `unsafe` code relying on field ordering of `Entity` or sufficiently
cursed shenanigans should change to reflect the different internal
representation and alignment requirements of `Entity`.
Co-authored-by: james7132 <contact@jamessliu.com>
Co-authored-by: NathanW <nathansward@comcast.net>
Bevy introduced unintentional breaking behaviour along with the v0.12.0
release regarding the `App::set_runner` API. See: #10385, #10389 for
details. We weren't able to catch this before release because this API
is only used internally in one or two places (the very places which
motivated the break).
This commit adds a regression test to help guarantee some expected
behaviour for custom runners, namely that `app::update` won't be called
before the runner has a chance to initialise state.
# Objective
There is no easy way to discard some amount for `Time<Fixed>`'s
overstep. This can be useful for online games when the client receives
information about a tick (which happens when you get a FPS drop or the
ping changes for example) it has not yet processed, it can discard
overstep equal to the number of ticks it can jump ahead.
Currently the workaround would be to create a new `Time<Fixed>` copy the
old timestep, advance it by the overstep amount that would remain after
subtracting the discarded amount, and using `.context_mut()` to
overwrite the old context with the new one. If you overwrite the whole
`Time<Fixed>` or forget to copy over the timestep you can introduce
undesirable side effects.
## Solution
Introduce a `discard_overstep` method, which discards the provided
amount of overstep. It uses satuarting_sub to avoid errors (negative
`Duration`s do not exist).
---
## Changelog
- Added `discard_overstep` function to `Time<Fixed>`
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Allow bevy applications that does not have any assets folder to start
from a read-only directory. (typically installed to a systems folder)
Fixes#10613
## Solution
- warn instead of panic when assets folder creation fails.
# Objective
- Currently, in 0.12 there is an issue that it is not possible to build
bevy for Wasm with feature "file_watcher" enabled. It still would not
compile, but now with proper explanation.
- Fixes https://github.com/bevyengine/bevy/issues/10507
## Solution
- Remove `notify-debouncer-full` dependency on WASM platform entirely.
- Compile with "file_watcher" feature now on platform `wasm32` gives
meaningful compile error.
---
## Changelog
### Fixed
- Compile with "file_watcher" feature now on platform `wasm32` gives
meaningful compile error.
# Add and implement constructors for Primitives
- Adds more Primitive types and adds a constructor for almost all of
them
- Works towards finishing #10572
## Solution
- Created new primitives
- Torus
- Conical Frustum
- Cone
- Ellipse
- Implemented constructors (`Primitive::new`) for almost every single
other primitive.
---------
Co-authored-by: Joona Aalto <jondolf.dev@gmail.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Handy to have a constant instead of `VolumeLevel::new(0.0)`
- `VolumeLevel::new` is not `const`
## Solution
- Adds a `VolumeLevel::ZERO` constant, which we have for most of our
other types where it makes sense.
---
## Changelog
- Add `VolumeLevel::ZERO`
# Objective
The way `bevy_app` works was changed unnecessarily in #9826 whose
changes should have been specific to `bevy_winit`.
I'm somewhat disappointed that happened and we can see in
https://github.com/bevyengine/bevy/pull/10195 that it made things more
complicated.
Even worse, in #10385 it's clear that this breaks the clean abstraction
over another engine someone built with Bevy!
Fixes#10385.
## Solution
- Move the changes made to `bevy_app` in #9826 to `bevy_winit`
- Revert the changes to `ScheduleRunnerPlugin` and the `run_once` runner
in #10195 as they're no longer necessary.
While this code is breaking relative to `0.12.0`, it reverts the
behavior of `bevy_app` back to how it was in `0.11`.
Due to the nature of the breakage relative to `0.11` I hope this will be
considered for `0.12.1`.
# Objective
- Fix the panic on using Images in UiMaterials due to assets not being
loaded.
- Fixes#10513
## Solution
- add `let else` statement that `return`s or `continue`s instead of
unwrapping, causing a panic.
# Objective
- Fixes#10518
## Solution
I've added a method to `LoadContext`, `load_direct_with_reader`, which
mirrors the behaviour of `load_direct` with a single key difference: it
is provided with the `Reader` by the caller, rather than getting it from
the contained `AssetServer`. This allows for an `AssetLoader` to process
its `Reader` stream, and then directly hand the results off to the
`LoadContext` to handle further loading. The outer `AssetLoader` can
control how the `Reader` is interpreted by providing a relevant
`AssetPath`.
For example, a Gzip decompression loader could process the asset
`images/my_image.png.gz` by decompressing the bytes, then handing the
decompressed result to the `LoadContext` with the new path
`images/my_image.png.gz/my_image.png`. This intuitively reflects the
nature of contained assets, whilst avoiding unintended behaviour, since
the generated path cannot be a real file path (a file and folder of the
same name cannot coexist in most file-systems).
```rust
#[derive(Asset, TypePath)]
pub struct GzAsset {
pub uncompressed: ErasedLoadedAsset,
}
#[derive(Default)]
pub struct GzAssetLoader;
impl AssetLoader for GzAssetLoader {
type Asset = GzAsset;
type Settings = ();
type Error = GzAssetLoaderError;
fn load<'a>(
&'a self,
reader: &'a mut Reader,
_settings: &'a (),
load_context: &'a mut LoadContext,
) -> BoxedFuture<'a, Result<Self::Asset, Self::Error>> {
Box::pin(async move {
let compressed_path = load_context.path();
let file_name = compressed_path
.file_name()
.ok_or(GzAssetLoaderError::IndeterminateFilePath)?
.to_string_lossy();
let uncompressed_file_name = file_name
.strip_suffix(".gz")
.ok_or(GzAssetLoaderError::IndeterminateFilePath)?;
let contained_path = compressed_path.join(uncompressed_file_name);
let mut bytes_compressed = Vec::new();
reader.read_to_end(&mut bytes_compressed).await?;
let mut decoder = GzDecoder::new(bytes_compressed.as_slice());
let mut bytes_uncompressed = Vec::new();
decoder.read_to_end(&mut bytes_uncompressed)?;
// Now that we have decompressed the asset, let's pass it back to the
// context to continue loading
let mut reader = VecReader::new(bytes_uncompressed);
let uncompressed = load_context
.load_direct_with_reader(&mut reader, contained_path)
.await?;
Ok(GzAsset { uncompressed })
})
}
fn extensions(&self) -> &[&str] {
&["gz"]
}
}
```
Because this example is so prudent, I've included an
`asset_decompression` example which implements this exact behaviour:
```rust
fn main() {
App::new()
.add_plugins(DefaultPlugins)
.init_asset::<GzAsset>()
.init_asset_loader::<GzAssetLoader>()
.add_systems(Startup, setup)
.add_systems(Update, decompress::<Image>)
.run();
}
fn setup(mut commands: Commands, asset_server: Res<AssetServer>) {
commands.spawn(Camera2dBundle::default());
commands.spawn((
Compressed::<Image> {
compressed: asset_server.load("data/compressed_image.png.gz"),
..default()
},
Sprite::default(),
TransformBundle::default(),
VisibilityBundle::default(),
));
}
fn decompress<A: Asset>(
mut commands: Commands,
asset_server: Res<AssetServer>,
mut compressed_assets: ResMut<Assets<GzAsset>>,
query: Query<(Entity, &Compressed<A>)>,
) {
for (entity, Compressed { compressed, .. }) in query.iter() {
let Some(GzAsset { uncompressed }) = compressed_assets.remove(compressed) else {
continue;
};
let uncompressed = uncompressed.take::<A>().unwrap();
commands
.entity(entity)
.remove::<Compressed<A>>()
.insert(asset_server.add(uncompressed));
}
}
```
A key limitation to this design is how to type the internally loaded
asset, since the example `GzAssetLoader` is unaware of the internal
asset type `A`. As such, in this example I store the contained asset as
an `ErasedLoadedAsset`, and leave it up to the consumer of the `GzAsset`
to handle typing the final result, which is the purpose of the
`decompress` system. This limitation can be worked around by providing
type information to the `GzAssetLoader`, such as `GzAssetLoader<Image,
ImageAssetLoader>`, but this would require registering the asset loader
for every possible decompression target.
Aside from this limitation, nested asset containerisation works as an
end user would expect; if the user registers a `TarAssetLoader`, and a
`GzAssetLoader`, then they can load assets with compound
containerisation, such as `images.tar.gz`.
---
## Changelog
- Added `LoadContext::load_direct_with_reader`
- Added `asset_decompression` example
## Notes
- While I believe my implementation of a Gzip asset loader is
reasonable, I haven't included it as a public feature of `bevy_asset` to
keep the scope of this PR as focussed as possible.
- I have included `flate2` as a `dev-dependency` for the example; it is
not included in the main dependency graph.
# Objective
Addresses #[10438](https://github.com/bevyengine/bevy/issues/10438)
The objective was to include the failing path in the error for the user
to see.
## Solution
Add a `path` field to the `ReadAssetBytesError::Io` variant to expose
the failing path in the error message.
## Migration Guide
- The `ReadAssetBytesError::Io` variant now contains two named fields
instead of converting from `std::io::Error`.
1. `path`: The requested (failing) path (`PathBuf`)
2. `source`: The source `std::io::Error`
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Fixes#10532
## Solution
I've updated the various `Event` send methods to return the sent
`EventId`(s). Since these methods previously returned nothing, and this
information is cheap to copy, there should be minimal negative
consequences to providing this additional information. In the case of
`send_batch`, an iterator is returned built from `Range` and `Map`,
which only consumes 16 bytes on the stack with no heap allocations for
all batch sizes. As such, the cost of this information is negligible.
These changes are reflected for `EventWriter` and `World`. For `World`,
the return types are optional to account for the possible lack of an
`Events` resource. Again, these methods previously returned no
information, so its inclusion should only be a benefit.
## Usage
Now when sending events, the IDs of those events is available for
immediate use:
```rust
// Example of a request-response system where the requester can track handled requests.
/// A system which can make and track requests
fn requester(
mut requests: EventWriter<Request>,
mut handled: EventReader<Handled>,
mut pending: Local<HashSet<EventId<Request>>>,
) {
// Check status of previous requests
for Handled(id) in handled.read() {
pending.remove(&id);
}
if !pending.is_empty() {
error!("Not all my requests were handled on the previous frame!");
pending.clear();
}
// Send a new request and remember its ID for later
let request_id = requests.send(Request::MyRequest { /* ... */ });
pending.insert(request_id);
}
/// A system which handles requests
fn responder(
mut requests: EventReader<Request>,
mut handled: EventWriter<Handled>,
) {
for (request, id) in requests.read_with_id() {
if handle(request).is_ok() {
handled.send(Handled(id));
}
}
}
```
In the above example, a `requester` system can send request events, and
keep track of which ones are currently pending by `EventId`. Then, a
`responder` system can act on that event, providing the ID as a
reference that the `requester` can use. Before this PR, it was not
trivial for a system sending events to keep track of events by ID. This
is unfortunate, since for a system reading events, it is trivial to
access the ID of a event.
---
## Changelog
- Updated `Events`:
- Added `send_batch`
- Modified `send` to return the sent `EventId`
- Modified `send_default` to return the sent `EventId`
- Updated `EventWriter`
- Modified `send_batch` to return all sent `EventId`s
- Modified `send` to return the sent `EventId`
- Modified `send_default` to return the sent `EventId`
- Updated `World`
- Modified `send_event` to return the sent `EventId` if sent, otherwise
`None`.
- Modified `send_event_default` to return the sent `EventId` if sent,
otherwise `None`.
- Modified `send_event_batch` to return all sent `EventId`s if sent,
otherwise `None`.
- Added unit test `test_send_events_ids` to ensure returned `EventId`s
match the sent `Event`s
- Updated uses of modified methods.
## Migration Guide
### `send` / `send_default` / `send_batch`
For the following methods:
- `Events::send`
- `Events::send_default`
- `Events::send_batch`
- `EventWriter::send`
- `EventWriter::send_default`
- `EventWriter::send_batch`
- `World::send_event`
- `World::send_event_default`
- `World::send_event_batch`
Ensure calls to these methods either handle the returned value, or
suppress the result with `;`.
```rust
// Now fails to compile due to mismatched return type
fn send_my_event(mut events: EventWriter<MyEvent>) {
events.send_default()
}
// Fix
fn send_my_event(mut events: EventWriter<MyEvent>) {
events.send_default();
}
```
This will most likely be noticed within `match` statements:
```rust
// Before
match is_pressed {
true => events.send(PlayerAction::Fire),
// ^--^ No longer returns ()
false => {}
}
// After
match is_pressed {
true => {
events.send(PlayerAction::Fire);
},
false => {}
}
```
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Nicola Papale <nicopap@users.noreply.github.com>
# Objective
Give us the ability to load untyped assets in AssetLoaders.
## Solution
Basically just copied the code from `load`, but used
`asset_server.load_untyped` instead internally.
## Changelog
Added `load_untyped` method to `LoadContext`
# Objective
- Implement a subset of
https://github.com/bevyengine/rfcs/blob/main/rfcs/12-primitive-shapes.md#feature-name-primitive-shapes
## Solution
- Define a very basic set of primitives in bevy_math
- Assume a 0,0,0 origin for most shapes
- Use radius and half extents to avoid unnecessary computational
overhead wherever they get used
- Provide both Boxed and const generics variants for shapes with
variable sizes
- Boxed is useful if a 3rd party crate wants to use something like
enum-dispatch for all supported primitives
- Const generics is useful when just working on a single primitive, as
it causes no allocs
#### Some discrepancies from the RFC:
- Box was changed to Cuboid, because Box is already used for an alloc
type
- Skipped Cone because it's unclear where the origin should be for
different uses
- Skipped Wedge because it's too niche for an initial PR (we also don't
implement Torus, Pyramid or a Death Star (there's an SDF for that!))
- Skipped Frustum because while it would be a useful math type, it's not
really a common primitive
- Skipped Triangle3d and Quad3d because those are just rotated 2D shapes
## Future steps
- Add more primitives
- Add helper methods to make primitives easier to construct (especially
when half extents are involved)
- Add methods to calculate AABBs for primitives (useful for physics, BVH
construction, for the mesh AABBs, etc)
- Add wrappers for common and cheap operations, like extruding 2D shapes
and translating them
- Use the primitives to generate meshes
- Provide signed distance functions and gradients for primitives (maybe)
---
## Changelog
- Added a collection of primitives to the bevy_math crate
---------
Co-authored-by: Joona Aalto <jondolf.dev@gmail.com>
# Objective
Closes#10319
## Changelog
* Added a new `Color::rgba_from_array([f32; 4]) -> Color` method.
* Added a new `Color::rgb_from_array([f32; 3]) -> Color` method.
* Added a new `Color::rgba_linear_from_array([f32; 4]) -> Color` method.
* Added a new `Color::rgb_linear_from_array([f32; 3]) -> Color` method.
* Added a new `Color::hsla_from_array([f32; 4]) -> Color` method.
* Added a new `Color::hsl_from_array([f32; 3]) -> Color` method.
* Added a new `Color::lcha_from_array([f32; 4]) -> Color` method.
* Added a new `Color::lch_from_array([f32; 3]) -> Color` method.
* Added a new `Color::rgba_to_vec4(&self) -> Vec4` method.
* Added a new `Color::rgba_to_array(&self) -> [f32; 4]` method.
* Added a new `Color::rgb_to_vec3(&self) -> Vec3` method.
* Added a new `Color::rgb_to_array(&self) -> [f32; 3]` method.
* Added a new `Color::rgba_linear_to_vec4(&self) -> Vec4` method.
* Added a new `Color::rgba_linear_to_array(&self) -> [f32; 4]` method.
* Added a new `Color::rgb_linear_to_vec3(&self) -> Vec3` method.
* Added a new `Color::rgb_linear_to_array(&self) -> [f32; 3]` method.
* Added a new `Color::hsla_to_vec4(&self) -> Vec4` method.
* Added a new `Color::hsla_to_array(&self) -> [f32; 4]` method.
* Added a new `Color::hsl_to_vec3(&self) -> Vec3` method.
* Added a new `Color::hsl_to_array(&self) -> [f32; 3]` method.
* Added a new `Color::lcha_to_vec4(&self) -> Vec4` method.
* Added a new `Color::lcha_to_array(&self) -> [f32; 4]` method.
* Added a new `Color::lch_to_vec3(&self) -> Vec3` method.
* Added a new `Color::lch_to_array(&self) -> [f32; 3]` method.
## Migration Guide
`Color::from(Vec4)` is now `Color::rgba_from_array(impl Into<[f32; 4]>)`
`Vec4::from(Color)` is now `Color::rgba_to_vec4(&self)`
Before:
```rust
let color_vec4 = Vec4::new(0.5, 0.5, 0.5);
let color_from_vec4 = Color::from(color_vec4);
let color_array = [0.5, 0.5, 0.5];
let color_from_array = Color::from(color_array);
```
After:
```rust
let color_vec4 = Vec4::new(0.5, 0.5, 0.5);
let color_from_vec4 = Color::rgba_from_array(color_vec4);
let color_array = [0.5, 0.5, 0.5];
let color_from_array = Color::rgba_from_array(color_array);
```
# Objective
Close#10504. Improve the development experience for working with scenes
by not requiring the user to specify a matching version of `ron` in
their `Cargo.toml`
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- When compiling bevy for both singlethreaded and multithreaded contexts
and using `Task` directly, you can run into errors where you expect a
`Task` to be returned but `FakeTask` is instead. Due to `FakeTask` being
private the only solution is to ignore the return at all however because
it *is* returned that isn't totally clear. The error is confusing and
doesn't provide a solution or help figuring it out.
## Solution
- Made `FakeTask` public and added brief documentation providing a use
(none) that helps guide usage (no usage) of FakeTask.
In gamepad.rs, `ButtonSettings` `is_pressed` and `is_released` are both
private, but their implementations use publicly available values.
Keeping them private forces consumers to unnecessarily re-implement this
logic, so just make them public.
## Objective
- Add an arrow gizmo as suggested by #9400
## Solution
(excuse my Protomen music)
https://github.com/bevyengine/bevy/assets/14184826/192adf24-079f-4a4b-a17b-091e892974ec
Wasn't horribly hard when i remembered i can change coordinate systems
whenever I want. Gave them four tips (as suggested by @alice-i-cecile in
discord) instead of trying to decide what direction the tips should
point.
Made the tip length default to 1/10 of the arrow's length, which looked
good enough to me. Hard-coded the angle from the body to the tips to 45
degrees.
## Still TODO
- [x] actual doc comments
- [x] doctests
- [x] `ArrowBuilder.with_tip_length()`
---
## Changelog
- Added `gizmos.arrow()` and `gizmos.arrow_2d()`
- Added arrows to `2d_gizmos` and `3d_gizmos` examples
## Migration Guide
N/A
---------
Co-authored-by: Nicola Papale <nicopap@users.noreply.github.com>
# Objective
Allows chained systems taking an `In<_>` input parameter to be run as
one-shot systems. This API was mentioned in #8963.
In addition, `run_system(_with_input)` returns the system output, for
any `'static` output type.
## Solution
A new function, `World::run_system_with_input` allows a `SystemId<I, O>`
to be run by providing an `I` value as input and producing `O` as an
output.
`SystemId<I, O>` is now generic over the input type `I` and output type
`O`, along with the related functions and types `RegisteredSystem`,
`RemovedSystem`, `register_system`, `remove_system`, and
`RegisteredSystemError`. These default to `()`, preserving the existing
API, for all of the public types.
---
## Changelog
- Added `World::run_system_with_input` function to allow one-shot
systems that take `In<_>` input parameters
- Changed `World::run_system` and `World::register_system` to support
systems with return types beyond `()`
- Added `Commands::run_system_with_input` command that schedules a
one-shot system with an `In<_>` input parameter
# Objective
- Ensure ExtendedMaterial can be referenced in bevy_egui_inspector
correctly
## Solution
Add a more manual `TypePath` implementation to work around bugs in the
derive macro.
# Objective
Make sure a camera which has had its render target changed recomputes
its info.
On main, the following is possible:
- System A has an inactive camera with render target set to the default
`Image` (i.e. white 1x1 rgba texture)
Later:
- System B sets the same camera active and sets the `camera.target` to a
newly created `Image`
**Bug**: Since `camera_system` only checks `Modified` and not `Added`
events, the size of the render target is not recomputed, which means the
camera will render with 1x1 size even though the new target is an
entirely different size.
## Solution
- Ensure `camera_system` checks `Added` image assets events
## Changelog
### Fixed
- Cameras which have their render targets changed to a newly created
target with a different size than the previous target will now render
properly
---------
Signed-off-by: Torstein Grindvik <torstein.grindvik@muybridge.com>
Co-authored-by: Torstein Grindvik <torstein.grindvik@muybridge.com>
Co-authored-by: Afonso Lage <lage.afonso@gmail.com>
Fix a precision issue with in the manual near-clipping function.
This only affected lines that span large distances (starting at 100_000~
units) in my testing.
Fixes#10403
# Objective
- Reduce work from inactive cameras
Tracing was done on the `3d_shapes` example on PR
https://github.com/bevyengine/bevy/pull/10543 .
Doing tracing on a "real" application showed more instances of
unnecessary work.
## Solution
- Skip work on inactive cameras
Signed-off-by: Torstein Grindvik <torstein.grindvik@muybridge.com>
Co-authored-by: Torstein Grindvik <torstein.grindvik@muybridge.com>
# Objective
The quality of Bevy's text rendering can vary wildly depending on the
font, font size, pixel alignment and scale factor.
But this situation can be improved dramatically with some small
adjustments.
## Solution
* Text node positions are rounded to the nearest physical pixel before
rendering.
* Each glyph texture has a 1-pixel wide transparent border added along
its edges.
This means font atlases will use more memory because of the extra pixel
of padding for each glyph but it's more than worth it I think (although
glyph size is increased by 2 pixels on both axes, the net increase is 1
pixel as the font texture atlas's padding has been removed).
## Results
Screenshots are from the 'ui' example with a scale factor of 1.5.
Things can get much uglier with the right font and worst scale
factor<sup>tm</sup>.
### before
<img width="300" alt="list-bad-text"
src="https://github.com/bevyengine/bevy/assets/27962798/482b384d-8743-4bae-9a65-468ff1b4c301">
### after
<img width="300" alt="good_list_text"
src="https://github.com/bevyengine/bevy/assets/27962798/34323b0a-f714-47ba-9728-a59804987bc8">
---
## Changelog
* Font texture atlases are no longer padded.
* Each glyph texture has a 1-pixel wide padding added along its edges.
* Text node positions are rounded to the nearest physical pixel before
rendering.
# Objective
Fixes#10436
Alternative to #10465
## Solution
`load_untyped_async` / `load_internal` currently has a bug. In
`load_untyped_async`, we pass None into `load_internal` for the
`UntypedHandle` of the labeled asset path. This results in a call to
`get_or_create_path_handle_untyped` with `loader.asset_type_id()`
This is a new code path that wasn't hit prior to the newly added
`load_untyped` because `load_untyped_async` was a private method only
used in the context of the `load_folder` impl (which doesn't have
labels)
The fix required some refactoring to catch that case and defer handle
retrieval. I have also made `load_untyped_async` public as it is now
"ready for public use" and unlocks new scenarios.
# Objective
Currently, if a large amount of inactive cameras are spawned, they will
immensely slow down performance.
This can be reproduced by adding
```rust
let default_image = images.add(default());
for _ in 0..10000 {
commands.spawn(Camera3dBundle {
camera: Camera {
is_active: false,
target: RenderTarget::Image(default_image.clone()),
..default()
},
..default()
});
}
```
to for example `3d_shapes`.
Using `tracy`, it's clear that preparing view bind groups for all
cameras is still happening.
Also, visibility checks on the extracted views from inactive cameras
also take place.
## Performance gains
The following `tracy` comparisons show the effect of skipping this
unneeded work.
Yellow is Bevy main, red is with the fix.
### Visibility checks
### Bind group preparation
## Solution
- Check if the cameras are inactive in the appropriate places, and if so
skip them
## Changelog
### Changed
- Do not extract views from inactive cameras or check visiblity from
their extracted views
Signed-off-by: Torstein Grindvik <torstein.grindvik@muybridge.com>
Co-authored-by: Torstein Grindvik <torstein.grindvik@muybridge.com>
(This is my first PR here, so I've probably missed some things. Please
let me know what else I should do to help you as a reviewer!)
# Objective
Due to https://github.com/rust-lang/rust/issues/117800, the `derive`'d
`PartialEq::eq` on `Entity` isn't as good as it could be. Since that's
used in hashtable lookup, let's improve it.
## Solution
The derived `PartialEq::eq` short-circuits if the generation doesn't
match. However, having a branch there is sub-optimal, especially on
64-bit systems like x64 that could just load the whole `Entity` in one
load anyway.
Due to complications around `poison` in LLVM and the exact details of
what unsafe code is allowed to do with reference in Rust
(https://github.com/rust-lang/unsafe-code-guidelines/issues/346), LLVM
isn't allowed to completely remove the short-circuiting. `&Entity` is
marked `dereferencable(8)` so LLVM knows it's allowed to *load* all 8
bytes -- and does so -- but it has to assume that the `index` might be
undef/poison if the `generation` doesn't match, and thus while it finds
a way to do it without needing a branch, it has to do something slightly
more complicated than optimal to combine the results. (LLVM is allowed
to change non-short-circuiting code to use branches, but not the other
way around.)
Here's a link showing the codegen today:
<https://rust.godbolt.org/z/9WzjxrY7c>
```rust
#[no_mangle]
pub fn demo_eq_ref(a: &Entity, b: &Entity) -> bool {
a == b
}
```
ends up generating the following assembly:
```asm
demo_eq_ref:
movq xmm0, qword ptr [rdi]
movq xmm1, qword ptr [rsi]
pcmpeqd xmm1, xmm0
pshufd xmm0, xmm1, 80
movmskpd eax, xmm0
cmp eax, 3
sete al
ret
```
(It's usually not this bad in real uses after inlining and LTO, but it
makes a strong demo.)
This PR manually implements `PartialEq::eq` *without* short-circuiting,
and because that tells LLVM that neither the generations nor the index
can be poison, it doesn't need to be so careful and can generate the
"just compare the two 64-bit values" code you'd have probably already
expected:
```asm
demo_eq_ref:
mov rax, qword ptr [rsi]
cmp qword ptr [rdi], rax
sete al
ret
```
Since this doesn't change the representation of `Entity`, if it's
instead passed by *value*, then each `Entity` is two `u32` registers,
and the old and the new code do exactly the same thing. (Other
approaches, like changing `Entity` to be `[u32; 2]` or `u64`, affect
this case.)
This should hopefully merge easily with changes like
https://github.com/bevyengine/bevy/pull/9907 that also want to change
`Entity`.
## Benchmarks
I'm not super-confident that I got my machine fully consistent for
benchmarking, but whether I run the old or the new one first I get
reasonably consistent results.
Here's a fairly typical example of the benchmarks I added in this PR:
Building the sets seems to be basically the same. It's usually reported
as noise, but sometimes I see a few percent slower or faster.
But lookup hits in particular -- since a hit checks that the key is
equal -- consistently shows around 10% improvement.
`cargo run --example many_cubes --features bevy/trace_tracy --release --
--benchmark` showed as slightly faster with this change, though if I had
to bet I'd probably say it's more noise than meaningful (but at least
it's not worse either):
This is my first PR here -- and my first time running Tracy -- so please
let me know what else I should run, or run things on your own more
reliable machines to double-check.
---
## Changelog
(probably not worth including)
Changed: micro-optimized `Entity::eq` to help LLVM slightly.
## Migration Guide
(I really hope nobody was using this on uninitialized entities where
sufficiently tortured `unsafe` could could technically notice that this
has changed.)
# Objective
After #9002, it seems that "single shot" animations were broken. When
completing, they would reset to their initial value. Which is generally
not what you want.
- Fixes#10480
## Solution
Avoid `%`-ing the animation after the number of completions exceeds the
specified one. Instead, we early-return. This is also true when the
player is playing in reverse.
---
## Changelog
- Avoid resetting animations after `Repeat::Never` animation completion.
# Objective
Fixes an issue where Bevy will look for `.meta` files in the root of the
server instead of `imported_assets/Default` on the web.
## Solution
`self.root_path.join` was seemingly forgotten in the `read_meta`
function on `HttpWasmAssetReader`, though it was included in the `read`
function. This PR simply adds the missing function call.
# Objective
* In Bevy 0.11 asset loaders used `anyhow::Error` for returning errors.
In Bevy 0.12 `AssetLoader` (and `AssetSaver`) have associated `Error`
type. Unfortunately it's type bounds does not allow `anyhow::Error` to
be used despite migration guide claiming otherwise. This makes migration
to 0.12 more challenging. Solve this by changing type bounds for
associated `Error` type.
* Fix#10350
## Solution
Change associated `Error` type bounds to require `Into<Box<dyn
std::error::Error + Send + Sync + 'static>>` to be implemented instead
of `std::error::Error + Send + Sync + 'static`. Both `anyhow::Error` and
errors generated by `thiserror` seems to be fine with such type bound.
---
## Changelog
### Fixed
* Fixed compatibility with `anyhow::Error` in `AssetLoader` and
`AssetSaver` associated `Error` type
# Objective
Fixes#10439
`Timer::percent()` and `Timer::percent_left()` return values in the
range of 0.0 to 1.0, even though their names contain "percent".
These functions should be renamed for clarity.
## Solution
- Rename `Timer::percent()` to `Timer::fraction()`
- Rename `Timer::percent_left()` to `Timer::fraction_remaining()`
---
## Changelog
### Changed
- Renamed `Timer::percent()` to `Timer::fraction()`
- Renamed `Timer::percent_left()` to `Timer::fraction_remaining()`
## Migration Guide
- `Timer::percent()` has been renamed to `Timer::fraction()`
- `Timer::percent_left()` has been renamed to
`Timer::fraction_remaining()`
# Objective
This is similar to #10439.
`Time::<Fixed>::overstep_percentage()` and
`Time::<Fixed>::overstep_percentage_f64()` returns values from 0.0 to
1.0, but their names use the word "percentage". These function names
make it easy to misunderstand that they return values from 0.0 to 100.0.
To avoid confusion, these functions should be renamed to
"`overstep_fraction(_f64)`".
## Solution
Rename them.
---
## Changelog
### Changed
- Renamed `Time::<Fixed>::overstep_percentage()` to
`Time::<Fixed>::overstep_fraction()`
- Renamed `Time::<Fixed>::overstep_percentage_f64()` to
`Time::<Fixed>::overstep_fraction_f64()`
## Migration Guide
- `Time::<Fixed>::overstep_percentage()` has been renamed to
`Time::<Fixed>::overstep_fraction()`
- `Time::<Fixed>::overstep_percentage_f64()` has been renamed to
`Time::<Fixed>::overstep_fraction_f64()`
# Objective
Hot reloading shader imports on windows is currently broken due to
inconsistent `/` and `\` usage ('/` is used in the user facing APIs and
`\` is produced by notify-rs (and likely other OS apis).
Fixes#10500
## Solution
Standardize import paths when loading a `Shader`. The correct long term
fix is to standardize AssetPath on `/`-only, but this is the right scope
of fix for a patch release.
---------
Co-authored-by: François <mockersf@gmail.com>
# Objective
- `CommandQueue::apply` calculates the address of the end of the
internal buffer as a `usize` rather than as a pointer, requiring two
casts of `cursor` to `usize`. Casting pointers to integers is generally
discouraged and may also prevent optimizations. It's also unnecessary
here.
## Solution
- Calculate the end address as a pointer rather than a `usize`.
Small note:
A trivial translation of the old code to use pointers would have
computed `end_addr` as `cursor.add(self.bytes.len())`, which is not
wrong but is an additional `unsafe` operation that also needs to be
properly documented and proven correct. However this operation is
already implemented in the form of the safe `as_mut_ptr_range`, so I
just used that.
# Objective
- The docs on `AssetPath::try_parse` say that it will return an error
when the string is malformed, but it actually just `.unwrap()`s the
result.
## Solution
- Use `?` instead of unwrapping the result.
# Objective
Calling `RenderDevice::poll` requires an instance of `wgpu::Maintain`,
but the type was not reexported by bevy. Working around it requires
adding a dependency on `wgpu`, since bevy does not reexport the `wgpu`
crate as a whole anywhere.
## Solution
Reexport `wgpu::Maintain` in `render_resource`, where the other wgpu
types are reexported.
# Objective
There is an if statement checking if a node is present in a graph
moments after it explicitly being added.
Unless the edge function has super weird side effects and the tests
don't pass, this is unnecessary.
## Solution
Removed it
# Objective
- Allow registration of one-shot systems when those systems have already
been `Box`ed.
- Needed for `bevy_eventlisteners` which allows adding event listeners
with callbacks in normal systems. The current one shot system
implementation requires systems be registered from an exclusive system,
and that those systems be passed in as types that implement
`IntoSystem`. However, the eventlistener callback crate allows users to
define their callbacks in normal systems, by boxing the system and
deferring initialization to an exclusive system.
## Solution
- Separate the registration of the system from the boxing of the system.
This is non-breaking, and adds a new method.
---
## Changelog
- Added `World::register_boxed_system` to allow registration of
already-boxed one shot systems.
# Objective
Had an issue where I had `VisibilityBundle` inside a bundle that
implements `Clone`, but since `VisibilityBundle` doesn't implement
`Clone` that wasn't possible. This PR fixes that.
## Solution
Implement `Clone` for `VisibilityBundle` by deriving it. And also
`SpatialBundle` too because why not.
---
## Changelog
- Added implementation for `Clone` on `VisibilityBundle` and
`SpatialBundle`.
# Objective
Fix a shader error that happens when using pbr morph targets.
## Solution
Fix the function name in the `prepass.wgsl` shader, which is incorrectly
prefixed with `morph::` (added in
61bad4eb57 (diff-97e4500f0a36bc6206d7b1490c8dd1a69459ee39dc6822eb9b2f7b160865f49fR42)).
This section of the shader is only enabled when using morph targets, so
it seems like there are no tests / examples using it?
# Objective
- Entities with both a `BackgroundColor` and a
`Handle<CustomUiMaterial>` are extracted by both pipelines and results
in entities being overwritten in the render world
- Fixes#10431
## Solution
- Ignore entities with `BackgroundColor` when extracting ui material
entities, and document that limit
# Objective
- There is a specialized hasher for entities:
[`EntityHashMap`](https://docs.rs/bevy/latest/bevy/utils/type.EntityHashMap.html)
- [`EntityMapper`] currently uses a normal `HashMap<Entity, Entity>`
- Fixes#10391
## Solution
- Replace the normal `HashMap` with the more performant `EntityHashMap`
## Questions
- This does change public API. Should a system be implemented to help
migrate code?
- Perhaps an `impl From<HashMap<K, V, S>> for EntityHashMap<K, V>`
- I updated to docs for each function that I changed, but I may have
missed something
---
## Changelog
- Changed `EntityMapper` to use `EntityHashMap` instead of normal
`HashMap`
## Migration Guide
If you are using the following types, update their listed methods to use
the new `EntityHashMap`. `EntityHashMap` has the same methods as the
normal `HashMap`, so you just need to replace the name.
### `EntityMapper`
- `get_map`
- `get_mut_map`
- `new`
- `world_scope`
### `ReflectMapEntities`
- `map_all_entities`
- `map_entities`
- `write_to_world`
### `InstanceInfo`
- `entity_map`
- This is a property, not a method.
---
This is my first time contributing in a while, and I'm not familiar with
the usage of `EntityMapper`. I changed the type definition and fixed all
errors, but there may have been things I've missed. Please keep an eye
out for me!
Preparing next release
This PR has been auto-generated
---------
Co-authored-by: Bevy Auto Releaser <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: François <mockersf@gmail.com>
# Objective
- Fixes#10209
- Assets should work in single threaded
## Solution
- In single threaded mode, don't use `async_fs` but fallback on
`std::fs` with a thin layer to mimic the async API
- file `file_asset.rs` is the async imps from `mod.rs`
- file `sync_file_asset.rs` is the same with `async_fs` APIs replaced by
`std::fs`
- which module is used depends on the `multi-threaded` feature
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
Fixes a small typo in `bevy_window/src/window.rs`
## Solution
Change `Should be used instead 'scale_factor' when set.` to `Should be
used instead of 'scale_factor' when set.`
# Objective
- Adopt #10239 to get it in time for the release
- Fix accessibility on macOS and linux
## Solution
- call `on_event` from AcccessKit adapter on winit events
---------
Co-authored-by: Nolan Darilek <nolan@thewordnerd.info>
Co-authored-by: Alice Cecile <alice.i.cecil@gmail.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Changes the default clear color to match the code block color on
Bevy's website.
## Solution
- Changed the clear color, updated text in examples to ensure adequate
contrast. Inconsistent usage of white text color set to use the default
color instead, which is already white.
- Additionally, updated the `3d_scene` example to make it look a bit
better, and use bevy's branding colors.
# Objective
Fixes https://github.com/bevyengine/bevy/issues/9077 (see this issue for
motivations)
## Solution
Implement 1 and 2 of the "How to fix it" section of
https://github.com/bevyengine/bevy/issues/9077
`update_directional_light_cascades` is split into
`clear_directional_light_cascades` and a generic
`build_directional_light_cascades`, to clear once and potentially insert
many times.
---
## Changelog
`DirectionalLight`'s computation is now generic over `CameraProjection`
and can work with custom camera projections.
## Migration Guide
If you have a component `MyCustomProjection` that implements
`CameraProjection`:
- You need to implement a new required associated method,
`get_frustum_corners`, returning an array of the corners of a subset of
the frustum with given `z_near` and `z_far`, in local camera space.
- You can now add the
`build_directional_light_cascades::<MyCustomProjection>` system in
`SimulationLightSystems::UpdateDirectionalLightCascades` after
`clear_directional_light_cascades` for your projection to work with
directional lights.
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
Bevy's default bias values for directional and spot lights currently
cause significant artifacts. We should fix that so shadows look good by
default!
This is a less controversial/invasive alternative to #10188, which might
enable us to keep the default bias value low, but also has its own sets
of concerns and caveats that make it a risky choice for Bevy 0.12.
## Solution
Bump the default normal bias from `0.6` to `1.8`. There is precedent for
values in this general area as Godot has a default normal bias of `2.0`.
### Before
### After
## Migration Guide
The default `shadow_normal_bias` value for `DirectionalLight` and
`SpotLight` has changed to accommodate artifacts introduced with the new
shadow PCF changes. It is unlikely (especially given the new PCF shadow
behaviors with these values), but you might need to manually tweak this
value if your scene requires a lower bias and it relied on the previous
default value.
# Objective
Reimplement #8793 on top of the recent rendering changes.
## Solution
The batch creation logic is quite convoluted, but I tested it on enough
examples to convince myself that it works.
The initial value of `batch_image_handle` is changed from
`HandleId::Id(Uuid::nil(), u64::MAX)` to `DEFAULT_IMAGE_HANDLE.id()`,
which allowed me to make the if-block simpler I think.
The default image from `DEFAULT_IMAGE_HANDLE` is always inserted into
`UiImageBindGroups` even if it's not used. I tried to add a check so
that it would be only inserted when there is only one batch using the
default image but this crashed.
---
## Changelog
`prepare_uinodes`
* Changed the initial value of `batch_image_handle` to
`DEFAULT_IMAGE_HANDLE.id()`.
* The default image is added to the UI image bind groups before
assembling the batches.
* A new `UiBatch` isn't created when the next `ExtractedUiNode`s image
is set to `DEFAULT_IMAGE_HANDLE` (unless it is the first item in the UI
phase items list).
# Objective
fix crash / misbehaviour when `DeferredPrepass` is used without
`DepthPrepass`.
- Deferred lighting requires the depth prepass texture to be present, so
that the depth texture is available for binding. without it the deferred
lighting pass will use 0 for depth of all meshes.
- When `DeferredPrepass` is used without other prepass markers, and with
any materials that use `OpaqueRenderMode::Forward`, those entities will
try to queue to the `Opaque3dPrepass` render phase, which doesn't exist,
causing a crash.
## Solution
- check if the prepass phases exist before queueing
- generate prepass textures if `Opaque3dDeferred` is present
- add a note to the DeferredPrepass marker to note that DepthPrepass is
also required by the default deferred lighting pass
- also changed some `With<T>.is_some()`s to `Has<T>`s
# Objective
I was working with forward rendering prepass fragment shaders and ran
into an issue of not being able to access vertex colors in the prepass.
I was able to access vertex colors in regular fragment shaders as well
as in deferred shaders.
## Solution
It seems like this `if` was nested unintentionally as moving it outside
of the `deferred` block works.
---
## Changelog
Enable vertex colors in forward rendering prepass fragment shaders
# Objective
Alternative to #7310
## Solution
Implemented the suggestion from
https://github.com/bevyengine/bevy/pull/7310#discussion_r1083356655
I am guessing that these were originally split as an optimization, but I
am not sure since I believe the original author of the code is the one
speculating about combining them up there.
## Benchmarks
I ran three benchmarks to compare main, this PR, and the approach from
#7310
([updated](https://github.com/rparrett/bevy/commits/rebased-parallel-check-visibility)
to the same commit on main).
This seems to perform slightly better than main in scenarios where most
entities have AABBs, and a bit worse when they don't (`many_lights`).
That seems to make sense to me.
Either way, the difference is ~-20 microseconds in the more common
scenarios or ~+100 microseconds in the less common scenario. I would
speculate that this might perform **very slightly** worse in
single-threaded scenarios.
Benches were run in release mode for 2000 frames while capturing a trace
with tracy.
| bench | commit | check_visibility_system mean μs |
| -- | -- | -- |
| many_cubes | main | 929.5 |
| many_cubes | this | 914.0 |
| many_cubes | 7310 | 1003.5 |
| | |
| many_foxes | main | 191.6 |
| many_foxes | this | 173.2 |
| many_foxes | 7310 | 167.9 |
| | |
| many_lights | main | 619.3 |
| many_lights | this | 703.7 |
| many_lights | 7310 | 842.5 |
## Notes
Technically this behaves slightly differently -- prior to this PR, view
visibility was determined even for entities without `GlobalTransform`. I
don't think this has any practical impact though.
IMO, I don't think we need to do this. But I opened a PR because it
seemed like the handiest way to share the code / benchmarks.
## TODO
I have done some rudimentary testing with the examples above, but I can
do some screenshot diffing if it seems like we want to do this.
# Objective
- Revert #10296
## Solution
- Avoid implementing `Display` without a justification
- `Display` implementation is a guarantee without a direct use, takes
additional time to compile and require work to maintain
- `Debug`, `Reflect` or `Serialize` should cover all needs
# Objective
The `BuildWorldChildren` API was missing several methods that exist in
`BuildChildren`.
## Solution
Added the methods (and tests) for consistency.
# Objective
If we add the stack index to `Node` then we don't need to walk the
`UiStack` repeatedly during extraction.
## Solution
Add a field `stack_index` to `Node`.
Update it in `ui_stack_system`.
Iterate queries directly in the UI's extraction systems.
### Benchmarks
```
cargo run --profile stress-test --features trace_tracy --example many_buttons -- --no-text --no-borders
```
frames (yellow this PR, red main):
<img width="447" alt="frames-per-second"
src="https://github.com/bevyengine/bevy/assets/27962798/385c0ccf-c257-42a2-b736-117542d56eff">
`ui_stack_system`:
<img width="585" alt="ui-stack-system"
src="https://github.com/bevyengine/bevy/assets/27962798/2916cc44-2887-4c3b-a144-13250d84f7d5">
extract schedule:
<img width="469" alt="extract-schedule"
src="https://github.com/bevyengine/bevy/assets/27962798/858d4ab4-d99f-48e8-b153-1c92f51e0743">
---
## Changelog
* Added the field `stack_index` to `Node`.
* `ui_stack_system` updates `Node::stack_index` after a new `UiStack` is
generated.
* The UI's extraction functions iterate a query directly rather than
walking the `UiStack` and doing lookups.
# Objective
<img width="1920" alt="Screenshot 2023-04-26 at 01 07 34"
src="https://user-images.githubusercontent.com/418473/234467578-0f34187b-5863-4ea1-88e9-7a6bb8ce8da3.png">
This PR adds both diffuse and specular light transmission capabilities
to the `StandardMaterial`, with support for screen space refractions.
This enables realistically representing a wide range of real-world
materials, such as:
- Glass; (Including frosted glass)
- Transparent and translucent plastics;
- Various liquids and gels;
- Gemstones;
- Marble;
- Wax;
- Paper;
- Leaves;
- Porcelain.
Unlike existing support for transparency, light transmission does not
rely on fixed function alpha blending, and therefore works with both
`AlphaMode::Opaque` and `AlphaMode::Mask` materials.
## Solution
- Introduces a number of transmission related fields in the
`StandardMaterial`;
- For specular transmission:
- Adds logic to take a view main texture snapshot after the opaque
phase; (in order to perform screen space refractions)
- Introduces a new `Transmissive3d` phase to the renderer, to which all
meshes with `transmission > 0.0` materials are sent.
- Calculates a light exit point (of the approximate mesh volume) using
`ior` and `thickness` properties
- Samples the snapshot texture with an adaptive number of taps across a
`roughness`-controlled radius enabling “blurry” refractions
- For diffuse transmission:
- Approximates transmitted diffuse light by using a second, flipped +
displaced, diffuse-only Lambertian lobe for each light source.
## To Do
- [x] Figure out where `fresnel_mix()` is taking place, if at all, and
where `dielectric_specular` is being calculated, if at all, and update
them to use the `ior` value (Not a blocker, just a nice-to-have for more
correct BSDF)
- To the _best of my knowledge, this is now taking place, after
964340cdd. The fresnel mix is actually "split" into two parts in our
implementation, one `(1 - fresnel(...))` in the transmission, and
`fresnel()` in the light implementations. A surface with more
reflectance now will produce slightly dimmer transmission towards the
grazing angle, as more of the light gets reflected.
- [x] Add `transmission_texture`
- [x] Add `diffuse_transmission_texture`
- [x] Add `thickness_texture`
- [x] Add `attenuation_distance` and `attenuation_color`
- [x] Connect values to glTF loader
- [x] `transmission` and `transmission_texture`
- [x] `thickness` and `thickness_texture`
- [x] `ior`
- [ ] `diffuse_transmission` and `diffuse_transmission_texture` (needs
upstream support in `gltf` crate, not a blocker)
- [x] Add support for multiple screen space refraction “steps”
- [x] Conditionally create no transmission snapshot texture at all if
`steps == 0`
- [x] Conditionally enable/disable screen space refraction transmission
snapshots
- [x] Read from depth pre-pass to prevent refracting pixels in front of
the light exit point
- [x] Use `interleaved_gradient_noise()` function for sampling blur in a
way that benefits from TAA
- [x] Drill down a TAA `#define`, tweak some aspects of the effect
conditionally based on it
- [x] Remove const array that's crashing under HLSL (unless a new `naga`
release with https://github.com/gfx-rs/naga/pull/2496 comes out before
we merge this)
- [ ] Look into alternatives to the `switch` hack for dynamically
indexing the const array (might not be needed, compilers seem to be
decent at expanding it)
- [ ] Add pipeline keys for gating transmission (do we really want/need
this?)
- [x] Tweak some material field/function names?
## A Note on Texture Packing
_This was originally added as a comment to the
`specular_transmission_texture`, `thickness_texture` and
`diffuse_transmission_texture` documentation, I removed it since it was
more confusing than helpful, and will likely be made redundant/will need
to be updated once we have a better infrastructure for preprocessing
assets_
Due to how channels are mapped, you can more efficiently use a single
shared texture image
for configuring the following:
- R - `specular_transmission_texture`
- G - `thickness_texture`
- B - _unused_
- A - `diffuse_transmission_texture`
The `KHR_materials_diffuse_transmission` glTF extension also defines a
`diffuseTransmissionColorTexture`,
that _we don't currently support_. One might choose to pack the
intensity and color textures together,
using RGB for the color and A for the intensity, in which case this
packing advice doesn't really apply.
---
## Changelog
- Added a new `Transmissive3d` render phase for rendering specular
transmissive materials with screen space refractions
- Added rendering support for transmitted environment map light on the
`StandardMaterial` as a fallback for screen space refractions
- Added `diffuse_transmission`, `specular_transmission`, `thickness`,
`ior`, `attenuation_distance` and `attenuation_color` to the
`StandardMaterial`
- Added `diffuse_transmission_texture`, `specular_transmission_texture`,
`thickness_texture` to the `StandardMaterial`, gated behind a new
`pbr_transmission_textures` cargo feature (off by default, for maximum
hardware compatibility)
- Added `Camera3d::screen_space_specular_transmission_steps` for
controlling the number of “layers of transparency” rendered for
transmissive objects
- Added a `TransmittedShadowReceiver` component for enabling shadows in
(diffusely) transmitted light. (disabled by default, as it requires
carefully setting up the `thickness` to avoid self-shadow artifacts)
- Added support for the `KHR_materials_transmission`,
`KHR_materials_ior` and `KHR_materials_volume` glTF extensions
- Renamed items related to temporal jitter for greater consistency
## Migration Guide
- `SsaoPipelineKey::temporal_noise` has been renamed to
`SsaoPipelineKey::temporal_jitter`
- The `TAA` shader def (controlled by the presence of the
`TemporalAntiAliasSettings` component in the camera) has been replaced
with the `TEMPORAL_JITTER` shader def (controlled by the presence of the
`TemporalJitter` component in the camera)
- `MeshPipelineKey::TAA` has been replaced by
`MeshPipelineKey::TEMPORAL_JITTER`
- The `TEMPORAL_NOISE` shader def has been consolidated with
`TEMPORAL_JITTER`
# Objective
- We need to check multiple times if a color is fully transparent, e.g.
for performance optimizations.
- Make code more readable.
- Reduce code duplication, to simplify making changes if needed (e.g. if
we need to take floating point weirdness into account later on).
## Solution
- Introduce a new `Color::is_fully_transparent` helper function to
determine if the alpha of a color is 0.
- Use the helper function in our UI rendering code.
---
## Changelog
- Added `Color::is_fully_transparent` helper function.
---------
Co-authored-by: François <mockersf@gmail.com>
# Objective
Right now, we flip the `world_normal` in response to `double_sided &&
!is_front`, however when calculating `N` from tangents and the normal
map, we don't flip the normal read from the normal map, which produces
extremely weird results.
## Solution
- Pass `double_sided` and `is_front` flags to the
`apply_normal_mapping()` function and use them to conditionally flip
`Nt`
## Comparison
Note: These are from a custom scene running with the `transmission`
branch, (#8015) I noticed lighting got pretty weird for the back side of
translucent `double_sided` materials whenever I added a normal map.
### Before
<img width="1392" alt="Screenshot 2023-10-31 at 01 26 06"
src="https://github.com/bevyengine/bevy/assets/418473/d5f8c9c3-aca1-4c2f-854d-f0d0fd2fb19a">
### After
<img width="1392" alt="Screenshot 2023-10-31 at 01 25 42"
src="https://github.com/bevyengine/bevy/assets/418473/fa0e1aa2-19ad-4c27-bb08-37299d97971c">
---
## Changelog
- Fixed a bug where `StandardMaterial::double_sided` would interact
incorrectly with normal maps, producing broken results.
# Objective
- Work towards GPU-driven culling
(https://github.com/bevyengine/bevy/pull/10164)
## Solution
- Pass the view frustum to the shader view uniform
---
## Changelog
- View Frustums are now extracted to the render world and made available
to shaders
# Objective
- Address inconsistent term usage in the docs for the alignment
properties for UI nodes. Fixes#10218
- `JustifyContent::Stretch` is missing despite being supported by Taffy,
being as the default value for Grids, so it should be added to Bevy as
well
## Solution
- Consistently provide links to the mdn site for the css equivalent
- Match (mostly) the documentation given on the pub struct and the
underlying enums
- Use the term `items` consistently to refer each child in the container
- Add `JustifyContent::Stretch` and map it to Taffy
## Migration Guide
- The `JustifyContents` enum has been expanded to include
`JustifyContents::Stretch`.
# Objective
Align all error-like types to implement `Error`.
Fixes #10176
## Solution
- Derive `Error` on more types
- Refactor instances of manual implementations that could be derived
This adds thiserror as a dependency to bevy_transform, which might
increase compilation time -- but I don't know of any situation where you
might only use that but not any other crate that pulls in bevy_utils.
The `contributors` example has a `LoadContributorsError` type, but as
it's an example I have not updated it. Doing that would mean either
having a `use bevy_internal::utils::thiserror::Error;` in an example
file, or adding `thiserror` as a dev-dependency to the main `bevy`
crate.
---
## Changelog
- All `…Error` types now implement the `Error` trait
Existing truncation code limits the number of attribute buffers to be
less than or equal to the number of vertices.
Instead the number of elements from each attribute buffer should be
limited to the length of the shortest buffer as mentioned in the earlier
warning.
# Objective
- Fixes#10267
## Solution
- Moves the `.take()` from the outer loop of attribute buffers, to the
inner loop of attribute values.
---
# Objective
`normalize` method that expresses a rectangle relative to a normalized
[0..1] x [0..1] space defined by another rectangle.
Useful for UI and texture atlas calculations etc.
---------
Co-authored-by: Rob Parrett <robparrett@gmail.com>
# Objective
- When finding the `CursorIcon` doc, it should be easier to find out
where to use it.
- When saying it is partially copied from the browser, be more clear
about the provenance and link to the spec document.
## Solution
- Link to the example code.
- Link to the CSS3 UI spec document.
Extracted the easy stuff from #8974 .
# Problem
1. Commands from `update_previous_view_projections` would crash when
matching entities were despawned.
2. `TaaPipelineId` and `draw_3d_graph` module were not public.
3. When the motion vectors pointed to pixels that are now off screen, a
smearing artifact could occur.
# Solution
1. Use `try_insert` command instead.
2. Make them public, renaming to `TemporalAntiAliasPipelineId`.
3. Check for this case, and ignore history for pixels that are
off-screen.
# Objective
- Remove special cases where `clippy::doc_markdown` lint is disabled.
## Solution
- Add default values back into `clippy.toml` by adding `".."` to the
list of `doc-valid-idents`.
- Add `"VSync"` and `"WebGL2"` to the list of `doc-valid-idents`.
- Remove all instances where `clippy::doc_markdown` is allowed.
- Fix `max_mip` formatting so that there isn't a warning.
# Objective
- Have more docs for `bevy_text` to avoid reading the source code for
some things.
## Solution
- Add some additional docs.
## Changelog
- `TextSettings.max_font_atlases` in `bevy_text` has been renamed to `
TextSettings.soft_max_font_atlases`.
## Migration Guide
- Usages of `TextSettings.max_font_atlases` from `bevy_text` must be
changed to `TextSettings.soft_max_font_atlases`.
# Situation
- In case of parent without visibility components, the visibility
inheritance of children creates a panic.
## Solution
- Apply same fallback visibility as parent not found instead of panic.
# Objective
Make it obvious why stuff renders pink when rendering stuff with bevy
with `default_features = false` and bevy's default tonemapper
(TonyMcMapFace, it requires a LUT which requires the `tonemapping_luts`,
`ktx2`, and `zstd` features).
Not sure if this should be considered as fixing these issues, but in my
previous PR (https://github.com/bevyengine/bevy/pull/9073, and old
discussions on discord that I only somewhat remember) it seemed like we
didn't want to make ktx2 and zstd required features for
bevy_core_pipeline.
Related https://github.com/bevyengine/bevy/issues/9179
Related https://github.com/bevyengine/bevy/issues/9098
## Solution
This logs an error when a LUT based tonemapper is used without the
`tonemapping_luts` feature enabled, and cleans up the default features a
bit (`tonemapping_luts` now includes the `ktx2` and `zstd` features,
since it panics without them).
Another solution would be to fall back to a non-lut based tonemapper,
but I don't like this solution as then it's not explicitly clear to
users why eg. a library example renders differently than a normal bevy
app (if the library forgot the `tonemapping_luts` feature).
I did remove the `ktx2` and `zstd` features from the list of default
features in Cargo.toml, as I don't believe anything else currently in
bevy relies on them (or at least searching through every hit for `ktx2`
and `zstd` didn't show anything except loading an environment map in
some examples), and they still show up in the `cargo_features` doc as
default features.
---
## Changelog
- The `tonemapping_luts` feature now includes both the `ktx2` and `zstd`
features to avoid a panic when the `tonemapping_luts` feature was enable
without both the `ktx2` and `zstd` feature enabled.
# Objective
- `deferred_rendering` and `load_gltf` fail in WebGPU builds due to
textureSample() being called on the diffuse environment map texture
after non-uniform control flow
## Solution
- The diffuse environment map texture only has one mip, so use
`textureSampleLevel(..., 0.0)` to sample that mip and not require UV
gradient calculation.
# Objective
- Build on the changes in https://github.com/bevyengine/bevy/pull/9982
- Use `ImageSamplerDescriptor` as the "public image sampler descriptor"
interface in all places (for consistency)
- Make it possible to configure textures to use the "default" sampler
(as configured in the `DefaultImageSampler` resource)
- Fix a bug introduced in #9982 that prevents configured samplers from
being used in Basis, KTX2, and DDS textures
---
## Migration Guide
- When using the `Image` API, use `ImageSamplerDescriptor` instead of
`wgpu::SamplerDescriptor`
- If writing custom wgpu renderer features that work with `Image`, call
`&image_sampler.as_wgpu()` to convert to a wgpu descriptor.
# Objective
- Folder handles are not shared. Loading the same folder multiple times
will result in different handles.
- Once folder handles are shared, they can no longer be manually
reloaded, so we should add support for hot-reloading them
## Solution
- Reuse folder handles based on their path
- Trigger a reload of a folder if a file contained in it (or a sub
folder) is added or removed
- This also covers adding/removing/moving sub folders containing files
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
- Assets v2 does not currently offer a public API to load untyped assets
## Solution
- Wrap the untyped handle in a `LoadedUntypedAsset` asset to offer a
non-blocking load for untyped assets. The user does not need to know the
actual asset type.
- Handles to `LoadedUntypedAsset` have the same path as the wrapped
asset, but their handles are shared using a label.
The user side of `load_untyped` looks like this:
```rust
use bevy::prelude::*;
use bevy_internal::asset::LoadedUntypedAsset;
fn main() {
App::new()
.add_plugins(DefaultPlugins)
.add_systems(Startup, setup)
.add_systems(Update, check)
.run();
}
#[derive(Resource)]
struct UntypedAsset {
handle: Handle<LoadedUntypedAsset>,
}
fn setup(
mut commands: Commands,
asset_server: Res<AssetServer>,
) {
let handle = asset_server.load_untyped("branding/banner.png");
commands.insert_resource(UntypedAsset { handle });
commands.spawn(Camera2dBundle::default());
}
fn check(
mut commands: Commands,
res: Option<Res<UntypedAsset>>,
assets: Res<Assets<LoadedUntypedAsset>>,
) {
if let Some(untyped_asset) = res {
if let Some(asset) = assets.get(&untyped_asset.handle) {
commands.spawn(SpriteBundle {
texture: asset.handle.clone().typed(),
..default()
});
commands.remove_resource::<UntypedAsset>();
}
}
}
```
---
## Changelog
- `load_untyped` on the asset server now returns a handle to a
`LoadedUntypedAsset` instead of an untyped handle to the asset at the
given path. The untyped handle for the given path can be retrieved from
the `LoadedUntypedAsset` once it is done loading.
## Migration Guide
Whenever possible use the typed API in order to directly get a handle to
your asset. If you do not know the type or need to use `load_untyped`
for a different reason, Bevy 0.12 introduces an additional layer of
indirection. The asset server will return a handle to a
`LoadedUntypedAsset`, which will load in the background. Once it is
loaded, the untyped handle to the asset file can be retrieved from the
`LoadedUntypedAsset`s field `handle`.
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
Fixes#9395
Alternative to #9415 (See discussion here)
## Solution
Do clamping like
[`fit-content`](https://www.w3.org/TR/css-sizing-3/#column-sizing).
## Notes
I am not sure if this is a valid approach. It doesn't seem to cause any
obvious issues with our existing examples.
# Objective
- Hot reloading doesn't work the first time it is used
## Solution
- Currently, Bevy processor:
1. Create the `imported_assets` folder
2. Setup a watcher on it
3. Clear empty folders, so the `imported_assets` folder is deleted
4. Recreate the `imported_assets` folder and add all the imported assets
- On a first run without an existing `imported_assets` with some
content, hot reloading won't work as step 3 breaks the file watcher
- This PR stops the empty root folder from being deleted
- Also don't setup the processor internal asset server for file
watching, freeing up a thread
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
Fixes#9473
## Solution
Added `resolve()` method to AssetPath. This method accepts a relative
asset path string and returns a "full" path that has been resolved
relative to the current (self) path.
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
First of all, this PR took heavy inspiration from #7760 and #5715. It
intends to also fix#5569, but with a slightly different approach.
This also fixes#9335 by reexporting `DynEq`.
## Solution
The advantage of this API is that we can intern a value without
allocating for zero-sized-types and for enum variants that have no
fields. This PR does this automatically in the `SystemSet` and
`ScheduleLabel` derive macros for unit structs and fieldless enum
variants. So this should cover many internal and external use cases of
`SystemSet` and `ScheduleLabel`. In these optimal use cases, no memory
will be allocated.
- The interning returns a `Interned<dyn SystemSet>`, which is just a
wrapper around a `&'static dyn SystemSet`.
- `Hash` and `Eq` are implemented in terms of the pointer value of the
reference, similar to my first approach of anonymous system sets in
#7676.
- Therefore, `Interned<T>` does not implement `Borrow<T>`, only `Deref`.
- The debug output of `Interned<T>` is the same as the interned value.
Edit:
- `AppLabel` is now also interned and the old
`derive_label`/`define_label` macros were replaced with the new
interning implementation.
- Anonymous set ids are reused for different `Schedule`s, reducing the
amount of leaked memory.
### Pros
- `InternedSystemSet` and `InternedScheduleLabel` behave very similar to
the current `BoxedSystemSet` and `BoxedScheduleLabel`, but can be copied
without an allocation.
- Many use cases don't allocate at all.
- Very fast lookups and comparisons when using `InternedSystemSet` and
`InternedScheduleLabel`.
- The `intern` module might be usable in other areas.
- `Interned{ScheduleLabel, SystemSet, AppLabel}` does implement
`{ScheduleLabel, SystemSet, AppLabel}`, increasing ergonomics.
### Cons
- Implementors of `SystemSet` and `ScheduleLabel` still need to
implement `Hash` and `Eq` (and `Clone`) for it to work.
## Changelog
### Added
- Added `intern` module to `bevy_utils`.
- Added reexports of `DynEq` to `bevy_ecs` and `bevy_app`.
### Changed
- Replaced `BoxedSystemSet` and `BoxedScheduleLabel` with
`InternedSystemSet` and `InternedScheduleLabel`.
- Replaced `impl AsRef<dyn ScheduleLabel>` with `impl ScheduleLabel`.
- Replaced `AppLabelId` with `InternedAppLabel`.
- Changed `AppLabel` to use `Debug` for error messages.
- Changed `AppLabel` to use interning.
- Changed `define_label`/`derive_label` to use interning.
- Replaced `define_boxed_label`/`derive_boxed_label` with
`define_label`/`derive_label`.
- Changed anonymous set ids to be only unique inside a schedule, not
globally.
- Made interned label types implement their label trait.
### Removed
- Removed `define_boxed_label` and `derive_boxed_label`.
## Migration guide
- Replace `BoxedScheduleLabel` and `Box<dyn ScheduleLabel>` with
`InternedScheduleLabel` or `Interned<dyn ScheduleLabel>`.
- Replace `BoxedSystemSet` and `Box<dyn SystemSet>` with
`InternedSystemSet` or `Interned<dyn SystemSet>`.
- Replace `AppLabelId` with `InternedAppLabel` or `Interned<dyn
AppLabel>`.
- Types manually implementing `ScheduleLabel`, `AppLabel` or `SystemSet`
need to implement:
- `dyn_hash` directly instead of implementing `DynHash`
- `as_dyn_eq`
- Pass labels to `World::try_schedule_scope`, `World::schedule_scope`,
`World::try_run_schedule`. `World::run_schedule`, `Schedules::remove`,
`Schedules::remove_entry`, `Schedules::contains`, `Schedules::get` and
`Schedules::get_mut` by value instead of by reference.
---------
Co-authored-by: Joseph <21144246+JoJoJet@users.noreply.github.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
When a mesh vertex attribute has a vertex count mismatch, a warning
message is printed with the index of the attribute which did not match.
Change to name the attribute, or fall back to the old behaviour if it
was not a known attribute.
Before:
```
MeshVertexAttributeId(2) has a different vertex count (32) than other attributes (64) in this mesh, all attributes will be truncated to match the smallest.
```
After:
```
Vertex_Uv has a different vertex count (32) than other attributes (64) in this mesh, all attributes will be truncated to match the smallest.
```
## Solution
Name the mesh attribute which had a count mismatch.
## Changelog
- If a mesh vertex attribute has a different count than other vertex
attributes, name the offending attribute using a human readable name
Signed-off-by: Torstein Grindvik <torstein.grindvik@muybridge.com>
Co-authored-by: Torstein Grindvik <torstein.grindvik@muybridge.com>
# Objective
- the style of import used by bevy guarantees merge conflicts when any
file change
- This is especially true when import lists are large, such as in
`bevy_pbr`
- Merge conflicts are tricky to resolve. This bogs down rendering PRs
and makes contributing to bevy's rendering system more difficult than it
needs to
## Solution
- Use wildcard imports to replace multiline import list in `bevy_pbr`
I suspect this is controversial, but I'd like to hear alternatives.
Because this is one of many papercuts that makes developing render
features near impossible.
Closes#9946
# Objective
Add a new type mirroring `wgpu::SamplerDescriptor` for
`ImageLoaderSettings` to control how a loaded image should be sampled.
Fix issues with texture sampler descriptors not being set when loading
gltf texture from URI.
## Solution
Add a new `ImageSamplerDescriptor` and its affiliated types that mirrors
`wgpu::SamplerDescriptor`, use it in the image loader settings.
---
## Changelog
### Added
- Added new types `ImageSamplerDescriptor`, `ImageAddressMode`,
`ImageFilterMode`, `ImageCompareFunction` and `ImageSamplerBorderColor`
that mirrors the corresponding wgpu types.
- `ImageLoaderSettings` now carries an `ImageSamplerDescriptor` field
that will be used to determine how the loaded image is sampled, and will
be serialized as part of the image assets `.meta` files.
### Changed
- `Image::from_buffer` now takes the sampler descriptor to use as an
additional parameter.
### Fixed
- Sampler descriptors are set for gltf textures loaded from URI.
# Objective
- Fixes#10250
```
[Log] ERROR crates/bevy_render/src/render_resource/pipeline_cache.rs:823 failed to process shader: (wasm_example.js, line 376)
error: no definition in scope for identifier: 'bevy_pbr::pbr_deferred_functions::unpack_unorm3x4_plus_unorm_20_'
┌─ crates/bevy_pbr/src/deferred/deferred_lighting.wgsl:44:20
│
44 │ frag_coord.z = bevy_pbr::pbr_deferred_functions::unpack_unorm3x4_plus_unorm_20_(deferred_data.b).w;
│ ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ unknown identifier
│
= no definition in scope for identifier: 'bevy_pbr::pbr_deferred_functions::unpack_unorm3x4_plus_unorm_20_'
```
## Solution
- Fix the import path
The "gray" issue is since #9258 on macOS
... at least they're not white anymore
<img width="1294" alt="Screenshot 2023-10-25 at 00 14 11"
src="https://github.com/bevyengine/bevy/assets/8672791/df1a1138-c26c-4417-9b49-a00fbb8561d7">
Updates the requirements on
[async-io](https://github.com/smol-rs/async-io) to permit the latest
version.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/smol-rs/async-io/releases">async-io's
releases</a>.</em></p>
<blockquote>
<h2>v2.0.0</h2>
<ul>
<li><strong>Breaking:</strong> <code>Async::new()</code> now takes types
that implement <code>AsFd</code>/<code>AsSocket</code> instead of
<code>AsRawFd</code>/<code>AsRawSocket</code>, in order to implement I/O
safety. (<a
href="https://redirect.github.com/smol-rs/async-io/issues/142">#142</a>)</li>
<li><strong>Breaking:</strong> <code>Async::get_mut()</code>,
<code>Async::read_with_mut()</code> and
<code>Async::write_with_mut()</code> are now <code>unsafe</code>. The
underlying source is technically "borrowed" by the polling
instance, so moving it out would be unsound. (<a
href="https://redirect.github.com/smol-rs/async-io/issues/142">#142</a>)</li>
<li>Expose miscellaneous <code>kqueue</code> filters in the
<code>os::kqueue</code> module. (<a
href="https://redirect.github.com/smol-rs/async-io/issues/112">#112</a>)</li>
<li>Expose a way to get the underlying <code>Poller</code>'s file
descriptor on Unix. (<a
href="https://redirect.github.com/smol-rs/async-io/issues/125">#125</a>)</li>
<li>Add a new <code>Async::new_nonblocking</code> method to allow users
to avoid duplicating an already nonblocking socket. (<a
href="https://redirect.github.com/smol-rs/async-io/issues/159">#159</a>)</li>
<li>Remove the unused <code>fastrand</code> and <code>memchr</code>
dependencies. (<a
href="https://redirect.github.com/smol-rs/async-io/issues/131">#131</a>)</li>
<li>Use <code>tracing</code> instead of <code>log</code>. (<a
href="https://redirect.github.com/smol-rs/async-io/issues/140">#140</a>)</li>
<li>Support ESP-IDF. (<a
href="https://redirect.github.com/smol-rs/async-io/issues/144">#144</a>)</li>
<li>Optimize the <code>block_on</code> function to reduce allocation,
leading to a slight performance improvement. (<a
href="https://redirect.github.com/smol-rs/async-io/issues/149">#149</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/smol-rs/async-io/blob/master/CHANGELOG.md">async-io's
changelog</a>.</em></p>
<blockquote>
<h1>Version 2.0.0</h1>
<ul>
<li><strong>Breaking:</strong> <code>Async::new()</code> now takes types
that implement <code>AsFd</code>/<code>AsSocket</code> instead of
<code>AsRawFd</code>/<code>AsRawSocket</code>, in order to implement I/O
safety. (<a
href="https://redirect.github.com/smol-rs/async-io/issues/142">#142</a>)</li>
<li><strong>Breaking:</strong> <code>Async::get_mut()</code>,
<code>Async::read_with_mut()</code> and
<code>Async::write_with_mut()</code> are now <code>unsafe</code>. The
underlying source is technically "borrowed" by the polling
instance, so moving it out would be unsound. (<a
href="https://redirect.github.com/smol-rs/async-io/issues/142">#142</a>)</li>
<li>Expose miscellaneous <code>kqueue</code> filters in the
<code>os::kqueue</code> module. (<a
href="https://redirect.github.com/smol-rs/async-io/issues/112">#112</a>)</li>
<li>Expose a way to get the underlying <code>Poller</code>'s file
descriptor on Unix. (<a
href="https://redirect.github.com/smol-rs/async-io/issues/125">#125</a>)</li>
<li>Add a new <code>Async::new_nonblocking</code> method to allow users
to avoid duplicating an already nonblocking socket. (<a
href="https://redirect.github.com/smol-rs/async-io/issues/159">#159</a>)</li>
<li>Remove the unused <code>fastrand</code> and <code>memchr</code>
dependencies. (<a
href="https://redirect.github.com/smol-rs/async-io/issues/131">#131</a>)</li>
<li>Use <code>tracing</code> instead of <code>log</code>. (<a
href="https://redirect.github.com/smol-rs/async-io/issues/140">#140</a>)</li>
<li>Support ESP-IDF. (<a
href="https://redirect.github.com/smol-rs/async-io/issues/144">#144</a>)</li>
<li>Optimize the <code>block_on</code> function to reduce allocation,
leading to a slight performance improvement. (<a
href="https://redirect.github.com/smol-rs/async-io/issues/149">#149</a>)</li>
</ul>
<h1>Version 1.13.0</h1>
<ul>
<li>Use <a
href="https://crates.io/crates/rustix/"><code>rustix</code></a> instead
of <a href="https://crates.io/crates/libc/"><code>libc</code></a>/<a
href="https://crates.io/crates/windows-sys/"><code>windows-sys</code></a>
for system calls (<a
href="https://redirect.github.com/smol-rs/async-io/issues/76">#76</a>)</li>
<li>Add a <code>will_fire</code> method to <code>Timer</code> to test if
it will ever fire (<a
href="https://redirect.github.com/smol-rs/async-io/issues/106">#106</a>)</li>
<li>Reduce syscalls in <code>Async::new</code> (<a
href="https://redirect.github.com/smol-rs/async-io/issues/107">#107</a>)</li>
<li>Improve the drop ergonomics of <code>Readable</code> and
<code>Writable</code> (<a
href="https://redirect.github.com/smol-rs/async-io/issues/109">#109</a>)</li>
<li>Change the "<code>wepoll</code>" in documentation to
"<code>IOCP</code>" (<a
href="https://redirect.github.com/smol-rs/async-io/issues/116">#116</a>)</li>
</ul>
<h1>Version 1.12.0</h1>
<ul>
<li>Switch from <code>winapi</code> to <code>windows-sys</code> (<a
href="https://redirect.github.com/smol-rs/async-io/issues/102">#102</a>)</li>
</ul>
<h1>Version 1.11.0</h1>
<ul>
<li>Update <code>concurrent-queue</code> to v2. (<a
href="https://redirect.github.com/smol-rs/async-io/issues/99">#99</a>)</li>
</ul>
<h1>Version 1.10.0</h1>
<ul>
<li>Remove the dependency on the <code>once_cell</code> crate to restore
the MSRV. (<a
href="https://redirect.github.com/smol-rs/async-io/issues/95">#95</a>)</li>
</ul>
<h1>Version 1.9.0</h1>
<ul>
<li>Fix panic on very large durations. (<a
href="https://redirect.github.com/smol-rs/async-io/issues/87">#87</a>)</li>
<li>Add <code>Timer::never</code> (<a
href="https://redirect.github.com/smol-rs/async-io/issues/87">#87</a>)</li>
</ul>
<h1>Version 1.8.0</h1>
<ul>
<li>Implement I/O safety traits on Rust 1.63+ (<a
href="https://redirect.github.com/smol-rs/async-io/issues/84">#84</a>)</li>
</ul>
<h1>Version 1.7.0</h1>
<ul>
<li>Process timers set for exactly <code>now</code>. (<a
href="https://redirect.github.com/smol-rs/async-io/issues/73">#73</a>)</li>
</ul>
<h1>Version 1.6.0</h1>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="7e89eec4d1"><code>7e89eec</code></a>
v2.0.0</li>
<li><a
href="356431754c"><code>3564317</code></a>
tests: Add test for <a
href="https://redirect.github.com/smol-rs/async-io/issues/154">#154</a></li>
<li><a
href="a5da16f072"><code>a5da16f</code></a>
Expose Async::new_nonblocking</li>
<li><a
href="0f2af634d8"><code>0f2af63</code></a>
Avoid needless set_nonblocking calls</li>
<li><a
href="62e3454f38"><code>62e3454</code></a>
Migrate to Rust 2021 (<a
href="https://redirect.github.com/smol-rs/async-io/issues/160">#160</a>)</li>
<li><a
href="59ee2ea27c"><code>59ee2ea</code></a>
Use set_nonblocking in Async::new on Windows (<a
href="https://redirect.github.com/smol-rs/async-io/issues/157">#157</a>)</li>
<li><a
href="d5bc619021"><code>d5bc619</code></a>
Remove needless as_fd/as_socket calls (<a
href="https://redirect.github.com/smol-rs/async-io/issues/158">#158</a>)</li>
<li><a
href="0b5016e567"><code>0b5016e</code></a>
m: Replace socket2 calls with rustix</li>
<li><a
href="8c3c3bd80b"><code>8c3c3bd</code></a>
m: Optimize block_on by caching Parker and Waker</li>
<li><a
href="1b1466a6c1"><code>1b1466a</code></a>
Update this crate to use the new polling breaking changes (<a
href="https://redirect.github.com/smol-rs/async-io/issues/142">#142</a>)</li>
<li>Additional commits viewable in <a
href="https://github.com/smol-rs/async-io/compare/v1.13.0...v2.0.0">compare
view</a></li>
</ul>
</details>
<br />
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Objective
A follow-up PR for https://github.com/bevyengine/bevy/pull/10221
## Changelog
Replaced usages of texture_descriptor.size with the helper methods of
`Image` through the entire engine codebase
# Objective
Reduce code duplication and improve APIs of Bevy's [global
taskpools](https://github.com/bevyengine/bevy/blob/main/crates/bevy_tasks/src/usages.rs).
## Solution
- As all three of the global taskpools have identical implementations
and only differ in their identifiers, this PR moves the implementation
into a macro to reduce code duplication.
- The `init` method is renamed to `get_or_init` to more accurately
reflect what it really does.
- Add a new `try_get` method that just returns `None` when the pool is
uninitialized, to complement the other getter methods.
- Minor documentation improvements to accompany the above changes.
---
## Changelog
- Added a new `try_get` method to the global TaskPools
- The global TaskPools' `init` method has been renamed to `get_or_init`
for clarity
- Documentation improvements
## Migration Guide
- Uses of `ComputeTaskPool::init`, `AsyncComputeTaskPool::init` and
`IoTaskPool::init` should be changed to `::get_or_init`.
# Objective
- Handle pausing audio when Android app is suspended
## Solution
- This is the start of application lifetime events. They are mostly
useful on mobile
- Next version of winit should add a few more
- When application is suspended, send an event to notify the
application, and run the schedule one last time before actually
suspending the app
- Audio is now suspended too 🎉https://github.com/bevyengine/bevy/assets/8672791/d74e2e09-ee29-4f40-adf2-36a0c064f94e
---------
Co-authored-by: Marco Buono <418473+coreh@users.noreply.github.com>
# Objective
Fog color was passed to shaders without conversion from sRGB to linear
color space. Because shaders expect colors in linear space this resulted
in wrong color being used. This is most noticeable in open scenes with
dark fog color and clear color set to the same color. In such case
background/clear color (which is properly processed) is going to be
darker than very far objects.
Example:
[bevy-fog-color-bug.zip](https://github.com/bevyengine/bevy/files/13063718/bevy-fog-color-bug.zip)
## Solution
Add missing conversion of fog color to linear color space.
---
## Changelog
* Fixed conversion of fog color
## Migration Guide
- Colors in `FogSettings` struct (`color` and `directional_light_color`)
are now sent to the GPU in linear space. If you were using
`Color::rgb()`/`Color::rgba()` and would like to retain the previous
colors, you can quickly fix it by switching to
`Color::rgb_linear()`/`Color::rgba_linear()`.
# Objective
- After #9826, there are issues on "run once runners"
- example `without_winit` crashes:
```
2023-10-19T22:06:01.810019Z INFO bevy_render::renderer: AdapterInfo { name: "llvmpipe (LLVM 15.0.7, 256 bits)", vendor: 65541, device: 0, device_type: Cpu, driver: "llvmpipe", driver_info: "Mesa 23.2.1 - kisak-mesa PPA (LLVM 15.0.7)", backend: Vulkan }
2023-10-19T22:06:02.860331Z WARN bevy_audio::audio_output: No audio device found.
2023-10-19T22:06:03.215154Z INFO bevy_diagnostic::system_information_diagnostics_plugin::internal: SystemInfo { os: "Linux 22.04 Ubuntu", kernel: "6.2.0-1014-azure", cpu: "Intel(R) Xeon(R) CPU E5-2673 v3 @ 2.40GHz", core_count: "2", memory: "6.8 GiB" }
thread 'main' panicked at crates/bevy_render/src/pipelined_rendering.rs:91:14:
Unable to get RenderApp. Another plugin may have removed the RenderApp before PipelinedRenderingPlugin
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
```
- example `headless` runs the app twice with the `run_once` schedule
## Solution
- Expose a more complex state of an app than just "ready"
- Also block adding plugins to an app after it has finished or cleaned
up its plugins as that wouldn't work anyway
## Migration Guide
* `app.ready()` has been replaced by `app.plugins_state()` which will
return more details on the current state of plugins in the app
# Objective
- Replace md5 by another hasher, as suggested in
https://github.com/bevyengine/bevy/pull/8624#discussion_r1359291028
- md5 is not secure, and is slow. use something more secure and faster
## Solution
- Replace md5 by blake3
Putting this PR in the 0.12 as once it's released, changing the hash
algorithm will be a painful breaking change
# Objective
Even at `reflectance == 0.0`, our ambient and environment map light
implementations still produce fresnel/specular highlights.
Such a low `reflectance` value lies outside of the physically possible
range and is already used by our directional, point and spot light
implementations (via the `fresnel()` function) to enable artistic
control, effectively disabling the fresnel "look" for non-physically
realistic materials. Since ambient and environment lights use a
different formulation, they were not honoring this same principle.
This PR aims to bring consistency to all light types, offering the same
fresnel extinguishing control to ambient and environment lights.
Thanks to `@nathanf` for [pointing
out](https://discord.com/channels/691052431525675048/743663924229963868/1164083373514440744)
the [Filament docs section about
this](https://google.github.io/filament/Filament.md.html#lighting/occlusion/specularocclusion).
## Solution
- We use [the same
formulation](ffc572728f/crates/bevy_pbr/src/render/pbr_lighting.wgsl (L99))
already used by the `fresnel()` function in `bevy_pbr::lighting` to
modulate the F90, to modulate the specular component of Ambient and
Environment Map lights.
## Comparison
⚠️ **Modified version of the PBR example for demo purposes, that shows
reflectance (_NOT_ part of this PR)** ⚠️
Also, keep in mind this is a very subtle difference (look for the
fresnel highlights on the lower left spheres, you might need to zoom in.
### Before
<img width="1392" alt="Screenshot 2023-10-18 at 23 02 25"
src="https://github.com/bevyengine/bevy/assets/418473/ec0efb58-9a98-4377-87bc-726a1b0a3ff3">
### After
<img width="1392" alt="Screenshot 2023-10-18 at 23 01 43"
src="https://github.com/bevyengine/bevy/assets/418473/a2809325-5728-405e-af02-9b5779767843">
---
## Changelog
- Ambient and Environment Map lights will now honor values of
`reflectance` that are below the physically possible range (⪅ 0.35) by
extinguishing their fresnel highlights. (Just like point, directional
and spot lights already did.) This allows for more consistent artistic
control and for non-physically realistic looks with all light types.
## Migration Guide
- If Fresnel highlights from Ambient and Environment Map lights are no
longer visible in your materials, make sure you're using a higher,
physically plausible value of `reflectance` (⪆ 0.35).
# Objective
- I want to use the `debug_glam_assert` feature with bevy.
## Solution
- Re-export the feature flag
---
## Changelog
- Re-export `debug_glam_assert` feature flag from glam.
# Objective
Fixes#5101
Alternative to #6511
## Solution
Corrected the behavior for ignored fields in `FromReflect`, which was
previously using the incorrect field indexes.
Similarly, fields marked with `#[reflect(skip_serializing)]` no longer
break when using `FromReflect` after deserialization. This was done by
modifying `SerializationData` to store a function pointer that can later
be used to generate a default instance of the skipped field during
deserialization.
The function pointer points to a function generated by the derive macro
using the behavior designated by `#[reflect(default)]` (or just
`Default` if none provided). The entire output of the macro is now
wrapped in an [unnamed
constant](https://doc.rust-lang.org/stable/reference/items/constant-items.html#unnamed-constant)
which keeps this behavior hygienic.
#### Rationale
The biggest downside to this approach is that it requires fields marked
`#[reflect(skip_serializing)]` to provide the ability to create a
default instance— either via a `Default` impl or by specifying a custom
one. While this isn't great, I think it might be justified by the fact
that we really need to create this value when using `FromReflect` on a
deserialized object. And we need to do this _during_ deserialization
because after that (at least for tuples and tuple structs) we lose
information about which field is which: _"is the value at index 1 in
this `DynamicTupleStruct` the actual value for index 1 or is it really
the value for index 2 since index 1 is skippable...?"_
#### Alternatives
An alternative would be to store `Option<Box<dyn Reflect>>` within
`DynamicTuple` and `DynamicTupleStruct` instead of just `Box<dyn
Reflect>`. This would allow us to insert "empty"/"missing" fields during
deserialization, thus saving the positional information of the skipped
fields. However, this may require changing the API of `Tuple` and
`TupleStruct` such that they can account for their dynamic counterparts
returning `None` for a skipped field. In practice this would probably
mean exposing the `Option`-ness of the dynamics onto implementors via
methods like `Tuple::drain` or `TupleStruct::field`.
Personally, I think requiring `Default` would be better than muddying up
the API to account for these special cases. But I'm open to trying out
this other approach if the community feels that it's better.
---
## Changelog
### Public Changes
#### Fixed
- The behaviors of `#[reflect(ignore)]` and
`#[reflect(skip_serializing)]` are no longer dependent on field order
#### Changed
- Fields marked with `#[reflect(skip_serializing)]` now need to either
implement `Default` or specify a custom default function using
`#[reflect(default = "path::to::some_func")]`
- Deserializing a type with fields marked `#[reflect(skip_serializing)]`
will now include that field initialized to its specified default value
- `SerializationData::new` now takes the new `SkippedField` struct along
with the skipped field index
- Renamed `SerializationData::is_ignored_field` to
`SerializationData::is_field_skipped`
#### Added
- Added `SkippedField` struct
- Added methods `SerializationData::generate_default` and
`SerializationData::iter_skipped`
### Internal Changes
#### Changed
- Replaced `members_to_serialization_denylist` and `BitSet<u32>` with
`SerializationDataDef`
- The `Reflect` derive is more hygienic as it now outputs within an
[unnamed
constant](https://doc.rust-lang.org/stable/reference/items/constant-items.html#unnamed-constant)
- `StructField::index` has been split up into
`StructField::declaration_index` and `StructField::reflection_index`
#### Removed
- Removed `bitset` dependency
## Migration Guide
* Fields marked `#[reflect(skip_serializing)]` now must implement
`Default` or specify a custom default function with `#[reflect(default =
"path::to::some_func")]`
```rust
#[derive(Reflect)]
struct MyStruct {
#[reflect(skip_serializing)]
#[reflect(default = "get_foo_default")]
foo: Foo, // <- `Foo` does not impl `Default` so requires a custom
function
#[reflect(skip_serializing)]
bar: Bar, // <- `Bar` impls `Default`
}
#[derive(Reflect)]
struct Foo(i32);
#[derive(Reflect, Default)]
struct Bar(i32);
fn get_foo_default() -> Foo {
Foo(123)
}
```
* `SerializationData::new` has been changed to expect an iterator of
`(usize, SkippedField)` rather than one of just `usize`
```rust
// BEFORE
SerializationData::new([0, 3].into_iter());
// AFTER
SerializationData::new([
(0, SkippedField::new(field_0_default_fn)),
(3, SkippedField::new(field_3_default_fn)),
].into_iter());
```
* `Serialization::is_ignored_field` has been renamed to
`Serialization::is_field_skipped`
* Fields marked `#[reflect(skip_serializing)]` are now included in
deserialization output. This may affect logic that expected those fields
to be absent.
# Objective
To get the width or height of an image you do:
```rust
self.texture_descriptor.size.{width, height}
```
that is quite verbose.
This PR adds some convenient methods for Image to reduce verbosity.
## Changelog
* Add a `width()` method for getting the width of an image.
* Add a `height()` method for getting the height of an image.
* Rename the `size()` method to `size_f32()`.
* Add a `size()` method for getting the size of an image as u32.
* Renamed the `aspect_2d()` method to `aspect_ratio()`.
## Migration Guide
Replace calls to the `Image::size()` method with `size_f32()`.
Replace calls to the `Image::aspect_2d()` method with `aspect_ratio()`.
# Objective
- Fix#10165
- On iOS simulator on apple silicon Macs, shader validation is going
through the host, but device limits are reported for the device. They
sometimes differ, and cause the validation to crash on something that
should work
```
-[MTLDebugRenderCommandEncoder validateCommonDrawErrors:]:5775: failed assertion `Draw Errors Validation
Fragment Function(fragment_): the offset into the buffer _naga_oil_mod_MJSXM6K7OBRHEOR2NVSXG2C7OZUWK527MJUW4ZDJNZTXG_memberfog that is bound at buffer index 6 must be a multiple of 256 but was set to 448.
```
## Solution
- Add a custom flag when building for the simulator and override the
buffer alignment
# Objective
- Closes#10049.
- Detect DDS texture containing a cubemap or a cubemap array.
## Solution
- When loading a dds texture, the header capabilities are checked for
the cubemap flag. An error is returned if not all faces are provided.
---
## Changelog
### Added
- Added a new texture error `TextureError::IncompleteCubemap`, used for
dds cubemap textures containing less than 6 faces, as that is not
supported on modern graphics APIs.
### Fixed
- DDS cubemaps are now loaded as cubemaps instead of 2D textures.
## Migration Guide
If you are matching on a `TextureError`, you will need to add a new
branch to handle `TextureError::IncompleteCubemap`.
# Objective
While reviewing #10187 I noticed some other mistakes in the UI node
docs.
## Solution
I did a quick proofreading pass and fixed a few things. And of course,
the typo from that other PR.
## Notes
I occasionally insert a period to make a section of doc self-consistent
but didn't go one way or the other on all periods in the file.
---------
Co-authored-by: Noah <noahshomette@gmail.com>
# Objective
Simplify bind group creation code. alternative to (and based on) #9476
## Solution
- Add a `BindGroupEntries` struct that can transparently be used where
`&[BindGroupEntry<'b>]` is required in BindGroupDescriptors.
Allows constructing the descriptor's entries as:
```rust
render_device.create_bind_group(
"my_bind_group",
&my_layout,
&BindGroupEntries::with_indexes((
(2, &my_sampler),
(3, my_uniform),
)),
);
```
instead of
```rust
render_device.create_bind_group(
"my_bind_group",
&my_layout,
&[
BindGroupEntry {
binding: 2,
resource: BindingResource::Sampler(&my_sampler),
},
BindGroupEntry {
binding: 3,
resource: my_uniform,
},
],
);
```
or
```rust
render_device.create_bind_group(
"my_bind_group",
&my_layout,
&BindGroupEntries::sequential((&my_sampler, my_uniform)),
);
```
instead of
```rust
render_device.create_bind_group(
"my_bind_group",
&my_layout,
&[
BindGroupEntry {
binding: 0,
resource: BindingResource::Sampler(&my_sampler),
},
BindGroupEntry {
binding: 1,
resource: my_uniform,
},
],
);
```
the structs has no user facing macros, is tuple-type-based so stack
allocated, and has no noticeable impact on compile time.
- Also adds a `DynamicBindGroupEntries` struct with a similar api that
uses a `Vec` under the hood and allows extending the entries.
- Modifies `RenderDevice::create_bind_group` to take separate arguments
`label`, `layout` and `entries` instead of a `BindGroupDescriptor`
struct. The struct can't be stored due to the internal references, and
with only 3 members arguably does not add enough context to justify
itself.
- Modify the codebase to use the new api and the `BindGroupEntries` /
`DynamicBindGroupEntries` structs where appropriate (whenever the
entries slice contains more than 1 member).
## Migration Guide
- Calls to `RenderDevice::create_bind_group({BindGroupDescriptor {
label, layout, entries })` must be amended to
`RenderDevice::create_bind_group(label, layout, entries)`.
- If `label`s have been specified as `"bind_group_name".into()`, they
need to change to just `"bind_group_name"`. `Some("bind_group_name")`
and `None` will still work, but `Some("bind_group_name")` can optionally
be simplified to just `"bind_group_name"`.
---------
Co-authored-by: IceSentry <IceSentry@users.noreply.github.com>
# Objective
- bump naga_oil to 0.10
- update shader imports to use rusty syntax
## Migration Guide
naga_oil 0.10 reworks the import mechanism to support more syntax to
make it more rusty, and test for item use before importing to determine
which imports are modules and which are items, which allows:
- use rust-style imports
```
#import bevy_pbr::{
pbr_functions::{alpha_discard as discard, apply_pbr_lighting},
mesh_bindings,
}
```
- import partial paths:
```
#import part::of::path
...
path::remainder::function();
```
which will call to `part::of::path::remainder::function`
- use fully qualified paths without importing:
```
// #import bevy_pbr::pbr_functions
bevy_pbr::pbr_functions::pbr()
```
- use imported items without qualifying
```
#import bevy_pbr::pbr_functions::pbr
// for backwards compatibility the old style is still supported:
// #import bevy_pbr::pbr_functions pbr
...
pbr()
```
- allows most imported items to end with `_` and numbers (naga_oil#30).
still doesn't allow struct members to end with `_` or numbers but it's
progress.
- the vast majority of existing shader code will work without changes,
but will emit "deprecated" warnings for old-style imports. these can be
suppressed with the `allow-deprecated` feature.
- partly breaks overrides (as far as i'm aware nobody uses these yet) -
now overrides will only be applied if the overriding module is added as
an additional import in the arguments to `Composer::make_naga_module` or
`Composer::add_composable_module`. this is necessary to support
determining whether imports are modules or items.
# Objective
This PR aims to make it so that we don't accidentally go over
`MAX_TEXTURE_IMAGE_UNITS` (in WebGL) or
`maxSampledTexturesPerShaderStage` (in WebGPU), giving us some extra
leeway to add more view bind group textures.
(This PR is extracted from—and unblocks—#8015)
## Solution
- We replace the existing `view_layout` and `view_layout_multisampled`
pair with an array of 32 bind group layouts, generated ahead of time;
- For now, these layouts cover all the possible combinations of:
`multisampled`, `depth_prepass`, `normal_prepass`,
`motion_vector_prepass` and `deferred_prepass`:
- In the future, as @JMS55 pointed out, we can likely take out
`motion_vector_prepass` and `deferred_prepass`, as these are not really
needed for the mesh pipeline and can use separate pipelines. This would
bring the possible combinations down to 8;
- We can also add more "optional" textures as they become needed,
allowing the engine to scale to a wider variety of use cases in lower
end/web environments (e.g. some apps might just want normal and depth
prepasses, others might only want light probes), while still keeping a
high ceiling for high end native environments where more textures are
supported.
- While preallocating bind group layouts is relatively cheap, the number
of combinations grows exponentially, so we should likely limit ourselves
to something like at most 256–1024 total layouts until we find a better
solution (like generating them lazily)
- To make this mechanism a little bit more explicit/discoverable, so
that compatibility with WebGPU/WebGL is not broken by accident, we add a
`MESH_PIPELINE_VIEW_LAYOUT_SAFE_MAX_TEXTURES` const and warn whenever
the number of textures in the layout crosses it.
- The warning is gated by `#[cfg(debug_assertions)]` and not issued in
release builds;
- We're counting the actual textures in the bind group layout instead of
using some roundabout metric so it should be accurate;
- Right now `MESH_PIPELINE_VIEW_LAYOUT_SAFE_MAX_TEXTURES` is set to 10
in order to leave 6 textures free for other groups;
- Currently there's no combination that would cause us to go over the
limit, but that will change once #8015 lands.
---
## Changelog
- `MeshPipeline` view bind group layouts now vary based on the current
multisampling and prepass states, saving a couple of texture binding
entries when prepasses are not in use.
## Migration Guide
- `MeshPipeline::view_layout` and
`MeshPipeline::view_layout_multisampled` have been replaced with a
private array to accomodate for variable view bind group layouts. To
obtain a view bind group layout for the current pipeline state, use the
new `MeshPipeline::get_view_layout()` or
`MeshPipeline::get_view_layout_from_key()` methods.
# Objective
Users shouldn't need to change their source code between "development
workflows" and "releasing". Currently, Bevy Asset V2 has two "processed"
asset modes `Processed` (assumes assets are already processed) and
`ProcessedDev` (starts an asset processor and processes assets). This
means that the mode must be changed _in code_ when switching from "app
dev" to "release". Very suboptimal.
We have already removed "runtime opt-in" for hot-reloading. Enabling the
`file_watcher` feature _automatically_ enables file watching in code.
This means deploying a game (without hot reloading enabled) just means
calling `cargo build --release` instead of `cargo run --features
bevy/file_watcher`.
We should adopt this pattern for asset processing.
## Solution
This adds the `asset_processor` feature, which will start the
`AssetProcessor` when an `AssetPlugin` runs in `AssetMode::Processed`.
The "asset processing workflow" is now:
1. Enable `AssetMode::Processed` on `AssetPlugin`
2. When developing, run with the `asset_processor` and `file_watcher`
features
3. When releasing, build without these features.
The `AssetMode::ProcessedDev` mode has been removed.
# Objective
I encountered a problem where I had a plugin `FooPlugin` which did
```rust
impl Plugin for FooPlugin {
fn build(&self, app: &mut App) {
app
.register_asset_source(...); // more stuff after
}
}
```
And when I tried using it, e.g.
```rust
asset_server.load("foo://data/asset.custom");
```
I got an error that `foo` was not recognized as a source.
I found that this is because asset sources must be registered _before_
`AssetPlugin` is added, and I had `FooPlugin` _after_.
## Solution
Add clarifying note about having to register sources before
`AssetPlugin` is added.
Signed-off-by: Torstein Grindvik <torstein.grindvik@muybridge.com>
Co-authored-by: Torstein Grindvik <torstein.grindvik@muybridge.com>
# Objective
- Provides actionable feedback when users encounter the error in
https://github.com/bevyengine/bevy/issues/10162
- Complements https://github.com/bevyengine/bevy/pull/10186
## Solution
- Log an error when registering an AssetSource after the AssetPlugin has
been built (via DefaultPlugins). This will let users know that their
registration order needs changing
The outputted error message will look like this:
```rust
ERROR bevy_asset::server: 'AssetSourceId::Name(test)' must be registered before `AssetPlugin` (typically added as part of `DefaultPlugins`)
```
---------
Co-authored-by: 66OJ66 <hi0obxud@anonaddy.me>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Fixes#10177 .
## Solution
Added a new run condition and tweaked the docs for `on_timer`.
## Changelog
### Added
- `on_real_time_timer` run condition
# Objective
This PR addresses the issue where Bevy displays one or several black
frames before the scene is first rendered. This is particularly
noticeable on iOS, where the black frames disrupt the transition from
the launch screen to the game UI. I have written about my search to
solve this issue on the Bevy discord:
https://discord.com/channels/691052431525675048/1151047604520632352
While I can attest this PR works on both iOS and Linux/Wayland (and even
seems to resolve a slight flicker during startup with the latter as
well), I'm not familiar enough with Bevy to judge the full implications
of these changes. I hope a reviewer or tester can help me confirm
whether this is the right approach, or what might be a cleaner solution
to resolve this issue.
## Solution
I have moved the "startup phase" as well as the plugin finalization into
the `app.run()` function so those things finish synchronously before the
"main schedule" starts. I even move one frame forward as well, using
`app.update()`, to make sure the rendering has caught up with the state
of the finalized plugins as well.
I admit that part of this was achieved through trial-and-error, since
not doing the "startup phase" *before* `app.finish()` resulted in
panics, while not calling an extra `app.update()` didn't fully resolve
the issue.
What I *can* say, is that the iOS launch screen animation works in such
a way that the OS initiates the transition once the framework's
[`didFinishLaunching()`](https://developer.apple.com/documentation/uikit/uiapplicationdelegate/1622921-application)
returns, meaning app developers **must** finish setting up their UI
before that function returns. This is what basically led me on the path
to try to "finish stuff earlier" :)
## Changelog
### Changed
- The startup phase and the first frame are rendered synchronously when
calling `app.run()`, before the "main schedule" is started. This fixes
black frames during the iOS launch transition and possible flickering on
other platforms, but may affect initialization order in your
application.
## Migration Guide
Because of this change, the timing of the first few frames might have
changed, and I think it could be that some things one may expect to be
initialized in a system may no longer be. To be honest, I feel out of my
depth to judge the exact impact here.
# Objective
Add a way to easily compute the up-to-date `GlobalTransform` of an
entity.
## Solution
Add the `TransformHelper`(Name pending) system parameter with the
`compute_global_transform` method that takes an `Entity` and returns a
`GlobalTransform` if successful.
## Changelog
- Added the `TransformHelper` system parameter for computing the
up-to-date `GlobalTransform` of an entity.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Noah <noahshomette@gmail.com>
# Objective
allow extending `Material`s (including the built in `StandardMaterial`)
with custom vertex/fragment shaders and additional data, to easily get
pbr lighting with custom modifications, or otherwise extend a base
material.
# Solution
- added `ExtendedMaterial<B: Material, E: MaterialExtension>` which
contains a base material and a user-defined extension.
- added example `extended_material` showing how to use it
- modified AsBindGroup to have "unprepared" functions that return raw
resources / layout entries so that the extended material can combine
them
note: doesn't currently work with array resources, as i can't figure out
how to make the OwnedBindingResource::get_binding() work, as wgpu
requires a `&'a[&'a TextureView]` and i have a `Vec<TextureView>`.
# Migration Guide
manual implementations of `AsBindGroup` will need to be adjusted, the
changes are pretty straightforward and can be seen in the diff for e.g.
the `texture_binding_array` example.
---------
Co-authored-by: Robert Swain <robert.swain@gmail.com>
# Objective
deferred doesn't currently run unless one of `DepthPrepass`,
`ForwardPrepass` or `MotionVectorPrepass` is also present on the camera.
## Solution
modify the `queue_prepass_material_meshes` view query to check for any
relevant phase, instead of requiring `Opaque3dPrepass` and
`AlphaMask3dPrepass` to be present
# Objective
- Correct the description of an error type for the scene loader
## Solution
- Correct the description of an error type for the scene loader
# Objective
- This PR aims to make the various `*_PREPASS` shader defs we have
(`NORMAL_PREPASS`, `DEPTH_PREPASS`, `MOTION_VECTORS_PREPASS` AND
`DEFERRED_PREPASS`) easier to use and understand:
- So that their meaning is now consistent across all contexts; (“prepass
X is enabled for the current view”)
- So that they're also consistently set across all contexts.
- It also aims to enable us to (with a follow up PR) to conditionally
gate the `BindGroupEntry` and `BindGroupLayoutEntry` items associated
with these prepasses, saving us up to 4 texture slots in WebGL
(currently globally limited to 16 per shader, regardless of bind groups)
## Solution
- We now consistently set these from `PrepassPipeline`, the
`MeshPipeline` and the `DeferredLightingPipeline`, we also set their
`MeshPipelineKey`s;
- We introduce `PREPASS_PIPELINE`, `MESH_PIPELINE` and
`DEFERRED_LIGHTING_PIPELINE` that can be used to detect where the code
is running, without overloading the meanings of the prepass shader defs;
- We also gate the WGSL functions in `bevy_pbr::prepass_utils` with
`#ifdef`s for their respective shader defs, so that shader code can
provide a fallback whenever they're not available.
- This allows us to conditionally include the bindings for these prepass
textures (My next PR, which will hopefully unblock #8015)
- @robtfm mentioned [these were being used to prevent accessing the same
binding as read/write in the
prepass](https://discord.com/channels/691052431525675048/743663924229963868/1163270458393759814),
however even after reversing the `#ifndef`s I had no issues running the
code, so perhaps the compiler is already smart enough even without tree
shaking to know they're not being used, thanks to `#ifdef
PREPASS_PIPELINE`?
## Comparison
### Before
| Shader Def | `PrepassPipeline` | `MeshPipeline` |
`DeferredLightingPipeline` |
| ------------------------ | ----------------- | -------------- |
-------------------------- |
| `NORMAL_PREPASS` | Yes | No | No |
| `DEPTH_PREPASS` | Yes | No | No |
| `MOTION_VECTORS_PREPASS` | Yes | No | No |
| `DEFERRED_PREPASS` | Yes | No | No |
| View Key | `PrepassPipeline` | `MeshPipeline` |
`DeferredLightingPipeline` |
| ------------------------ | ----------------- | -------------- |
-------------------------- |
| `NORMAL_PREPASS` | Yes | Yes | No |
| `DEPTH_PREPASS` | Yes | No | No |
| `MOTION_VECTORS_PREPASS` | Yes | No | No |
| `DEFERRED_PREPASS` | Yes | Yes\* | No |
\* Accidentally was being set twice, once with only
`deferred_prepass.is_some()` as a condition,
and once with `deferred_p repass.is_some() && !forward` as a condition.
### After
| Shader Def | `PrepassPipeline` | `MeshPipeline` |
`DeferredLightingPipeline` |
| ---------------------------- | ----------------- | --------------- |
-------------------------- |
| `NORMAL_PREPASS` | Yes | Yes | Yes |
| `DEPTH_PREPASS` | Yes | Yes | Yes |
| `MOTION_VECTORS_PREPASS` | Yes | Yes | Yes |
| `DEFERRED_PREPASS` | Yes | Yes | Unconditionally |
| `PREPASS_PIPELINE` | Unconditionally | No | No |
| `MESH_PIPELINE` | No | Unconditionally | No |
| `DEFERRED_LIGHTING_PIPELINE` | No | No | Unconditionally |
| View Key | `PrepassPipeline` | `MeshPipeline` |
`DeferredLightingPipeline` |
| ------------------------ | ----------------- | -------------- |
-------------------------- |
| `NORMAL_PREPASS` | Yes | Yes | Yes |
| `DEPTH_PREPASS` | Yes | Yes | Yes |
| `MOTION_VECTORS_PREPASS` | Yes | Yes | Yes |
| `DEFERRED_PREPASS` | Yes | Yes | Unconditionally |
---
## Changelog
- Cleaned up WGSL `*_PREPASS` shader defs so they're now consistently
used everywhere;
- Introduced `PREPASS_PIPELINE`, `MESH_PIPELINE` and
`DEFERRED_LIGHTING_PIPELINE` WGSL shader defs for conditionally
compiling logic based the current pipeline;
- WGSL functions from `bevy_pbr::prepass_utils` are now guarded with
`#ifdef` based on the currently enabled prepasses;
## Migration Guide
- When using functions from `bevy_pbr::prepass_utils`
(`prepass_depth()`, `prepass_normal()`, `prepass_motion_vector()`) in
contexts where these prepasses might be disabled, you should now wrap
your calls with the appropriate `#ifdef` guards, (`#ifdef
DEPTH_PREPASS`, `#ifdef NORMAL_PREPASS`, `#ifdef MOTION_VECTOR_PREPASS`)
providing fallback logic where applicable.
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
Co-authored-by: IceSentry <IceSentry@users.noreply.github.com>
# Objective
Fixes#10086
## Solution
Instead of serializing via `DynamicTypePath::reflect_type_path`, now
uses the `TypePath` found on the `TypeInfo` returned by
`Reflect::get_represented_type_info`.
This issue was happening because the dynamic types implement `TypePath`
themselves and do not (and cannot) forward their proxy's `TypePath`
data. The solution was to access the proxy's type information in order
to get the correct `TypePath` data.
## Changed
- The `Debug` impl for `TypePathTable` now includes output for all
fields.
# Objective
Time clamping happens consistently for apps that load non-trivial
things. While this _is_ an indicator that we should probably try to move
this work to a thread that doesn't block the Update, this is common
enough (and unactionable enough) that I think we should demote it for
now.
```
2023-10-16T18:46:14.918781Z WARN bevy_time::virt: delta time larger than maximum delta, clamping delta to 250ms and skipping 63.649253ms
2023-10-16T18:46:15.178048Z WARN bevy_time::virt: delta time larger than maximum delta, clamping delta to 250ms and skipping 1.71611ms
```
## Solution
Change `warn` to `debug` for this message
# Objective
Closes#10107
The visibility of `bevy::core::update_frame_count` should be `pub` so it
can be used in third-party code like this:
```rust
impl Plugin for MyPlugin {
fn build(&self, app: &mut App) {
app.add_systems(Last, use_frame_count.before(bevy::core::update_frame_count));
}
}
```
## Solution
Make `bevy::core::update_frame_count` public.
---
## Changelog
### Added
- Documentation for `bevy::core::update_frame_count`
### Changed
- Visibility of `bevy::core::update_frame_count` is now `pub`
# Objective
- Added support for newer AMD Radeon cards in the mod.rs file located at
``crates/bevy_render/src/view/window/mod.rs``
## Solution
- All I needed to add was ``name.starts_with("Radeon") ||`` to the
existing code on line 347 of
``crates/bevy_render/src/view/window/mod.rs``
---
## Changelog
- Changed ``crates/bevy_render/src/view/window/mod.rs``
# Objective
Current `FixedTime` and `Time` have several problems. This pull aims to
fix many of them at once.
- If there is a longer pause between app updates, time will jump forward
a lot at once and fixed time will iterate on `FixedUpdate` for a large
number of steps. If the pause is merely seconds, then this will just
mean jerkiness and possible unexpected behaviour in gameplay. If the
pause is hours/days as with OS suspend, the game will appear to freeze
until it has caught up with real time.
- If calculating a fixed step takes longer than specified fixed step
period, the game will enter a death spiral where rendering each frame
takes longer and longer due to more and more fixed step updates being
run per frame and the game appears to freeze.
- There is no way to see current fixed step elapsed time inside fixed
steps. In order to track this, the game designer needs to add a custom
system inside `FixedUpdate` that calculates elapsed or step count in a
resource.
- Access to delta time inside fixed step is `FixedStep::period` rather
than `Time::delta`. This, coupled with the issue that `Time::elapsed`
isn't available at all for fixed steps, makes it that time requiring
systems are either implemented to be run in `FixedUpdate` or `Update`,
but rarely work in both.
- Fixes#8800
- Fixes#8543
- Fixes#7439
- Fixes#5692
## Solution
- Create a generic `Time<T>` clock that has no processing logic but
which can be instantiated for multiple usages. This is also exposed for
users to add custom clocks.
- Create three standard clocks, `Time<Real>`, `Time<Virtual>` and
`Time<Fixed>`, all of which contain their individual logic.
- Create one "default" clock, which is just `Time` (or `Time<()>`),
which will be overwritten from `Time<Virtual>` on each update, and
`Time<Fixed>` inside `FixedUpdate` schedule. This way systems that do
not care specifically which time they track can work both in `Update`
and `FixedUpdate` without changes and the behaviour is intuitive.
- Add `max_delta` to virtual time update, which limits how much can be
added to virtual time by a single update. This fixes both the behaviour
after a long freeze, and also the death spiral by limiting how many
fixed timestep iterations there can be per update. Possible future work
could be adding `max_accumulator` to add a sort of "leaky bucket" time
processing to possibly smooth out jumps in time while keeping frame rate
stable.
- Many minor tweaks and clarifications to the time functions and their
documentation.
## Changelog
- `Time::raw_delta()`, `Time::raw_elapsed()` and related methods are
moved to `Time<Real>::delta()` and `Time<Real>::elapsed()` and now match
`Time` API
- `FixedTime` is now `Time<Fixed>` and matches `Time` API.
- `Time<Fixed>` default timestep is now 64 Hz, or 15625 microseconds.
- `Time` inside `FixedUpdate` now reflects fixed timestep time, making
systems portable between `Update ` and `FixedUpdate`.
- `Time::pause()`, `Time::set_relative_speed()` and related methods must
now be called as `Time<Virtual>::pause()` etc.
- There is a new `max_delta` setting in `Time<Virtual>` that limits how
much the clock can jump by a single update. The default value is 0.25
seconds.
- Removed `on_fixed_timer()` condition as `on_timer()` does the right
thing inside `FixedUpdate` now.
## Migration Guide
- Change all `Res<Time>` instances that access `raw_delta()`,
`raw_elapsed()` and related methods to `Res<Time<Real>>` and `delta()`,
`elapsed()`, etc.
- Change access to `period` from `Res<FixedTime>` to `Res<Time<Fixed>>`
and use `delta()`.
- The default timestep has been changed from 60 Hz to 64 Hz. If you wish
to restore the old behaviour, use
`app.insert_resource(Time::<Fixed>::from_hz(60.0))`.
- Change `app.insert_resource(FixedTime::new(duration))` to
`app.insert_resource(Time::<Fixed>::from_duration(duration))`
- Change `app.insert_resource(FixedTime::new_from_secs(secs))` to
`app.insert_resource(Time::<Fixed>::from_seconds(secs))`
- Change `system.on_fixed_timer(duration)` to
`system.on_timer(duration)`. Timers in systems placed in `FixedUpdate`
schedule automatically use the fixed time clock.
- Change `ResMut<Time>` calls to `pause()`, `is_paused()`,
`set_relative_speed()` and related methods to `ResMut<Time<Virtual>>`
calls. The API is the same, with the exception that `relative_speed()`
will return the actual last ste relative speed, while
`effective_relative_speed()` returns 0.0 if the time is paused and
corresponds to the speed that was set when the update for the current
frame started.
## Todo
- [x] Update pull name and description
- [x] Top level documentation on usage
- [x] Fix examples
- [x] Decide on default `max_delta` value
- [x] Decide naming of the three clocks: is `Real`, `Virtual`, `Fixed`
good?
- [x] Decide if the three clock inner structures should be in prelude
- [x] Decide on best way to configure values at startup: is manually
inserting a new clock instance okay, or should there be config struct
separately?
- [x] Fix links in docs
- [x] Decide what should be public and what not
- [x] Decide how `wrap_period` should be handled when it is changed
- [x] ~~Add toggles to disable setting the clock as default?~~ No,
separate pull if needed.
- [x] Add tests
- [x] Reformat, ensure adheres to conventions etc.
- [x] Build documentation and see that it looks correct
## Contributors
Huge thanks to @alice-i-cecile and @maniwani while building this pull.
It was a shared effort!
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Cameron <51241057+maniwani@users.noreply.github.com>
Co-authored-by: Jerome Humbert <djeedai@gmail.com>
# Objective
Calling `asset_server.load("scene.gltf#SomeLabel")` will silently fail
if `SomeLabel` does not exist.
Referenced in #9714
## Solution
We now detect this case and return an error. I also slightly refactored
`load_internal` to make the logic / dataflow much clearer.
---------
Co-authored-by: Pascal Hertleif <killercup@gmail.com>
# Objective
As called out in #9714, Bevy Asset V2 fails to hot-reload labeled assets
whose source asset has changed (in cases where the root asset is not
alive).
## Solution
Track alive labeled assets for a given source asset and allow hot
reloads in cases where a labeled asset is still alive.
# Objective
- Since #9885, running on an iOS device crashes trying to create the
processed folder
- This only happens on real device, not on the simulator
## Solution
- Setup processed assets only if needed
# Objective
On nightly there is a warning on a missing lifetime:
```bash
warning: `&` without an explicit lifetime name cannot be used here
```
The details are in https://github.com/rust-lang/rust/issues/115010, but
the bottom line is that in associated constants elided lifetimes are no
longer allowed to be implicitly defined.
This fixes the only place where it is missing.
## Solution
- Add explicit `'static` lifetime
# Objective
Currently, the asset loader outputs
```
2023-10-14T15:11:09.328850Z WARN bevy_asset::asset_server: no `AssetLoader` found
```
when user forgets to add an extension to a file. This is very confusing
behaviour, it sounds like there aren't any asset loaders existing.
## Solution
Add an extra message on the end when there are no file extensions.
# Objective
#10105 changed the ssao input color from the material base color to
white. i can't actually see a difference in the example but there should
be one in some cases.
## Solution
change it back.
# Objective
From my understanding, although resources are not meant to be created
and removed at every frame, they are still meant to be created
dynamically during the lifetime of the App.
But because the extract_resource API does not allow optional resources
from the main world, it's impossible to use resources in the render
phase that were not created before the render sub-app itself.
## Solution
Because the ECS engine already allows for system parameters to be
`Option<Res>`, it just had to be added.
---
## Changelog
- Changed
- `extract_resource` now takes an optional main world resource
- Fixed
- `ExtractResourcePlugin` doesn't cause panics anymore if the resource
is not already inserted
This adds support for **Multiple Asset Sources**. You can now register a
named `AssetSource`, which you can load assets from like you normally
would:
```rust
let shader: Handle<Shader> = asset_server.load("custom_source://path/to/shader.wgsl");
```
Notice that `AssetPath` now supports `some_source://` syntax. This can
now be accessed through the `asset_path.source()` accessor.
Asset source names _are not required_. If one is not specified, the
default asset source will be used:
```rust
let shader: Handle<Shader> = asset_server.load("path/to/shader.wgsl");
```
The behavior of the default asset source has not changed. Ex: the
`assets` folder is still the default.
As referenced in #9714
## Why?
**Multiple Asset Sources** enables a number of often-asked-for
scenarios:
* **Loading some assets from other locations on disk**: you could create
a `config` asset source that reads from the OS-default config folder
(not implemented in this PR)
* **Loading some assets from a remote server**: you could register a new
`remote` asset source that reads some assets from a remote http server
(not implemented in this PR)
* **Improved "Binary Embedded" Assets**: we can use this system for
"embedded-in-binary assets", which allows us to replace the old
`load_internal_asset!` approach, which couldn't support asset
processing, didn't support hot-reloading _well_, and didn't make
embedded assets accessible to the `AssetServer` (implemented in this pr)
## Adding New Asset Sources
An `AssetSource` is "just" a collection of `AssetReader`, `AssetWriter`,
and `AssetWatcher` entries. You can configure new asset sources like
this:
```rust
app.register_asset_source(
"other",
AssetSource::build()
.with_reader(|| Box::new(FileAssetReader::new("other")))
)
)
```
Note that `AssetSource` construction _must_ be repeatable, which is why
a closure is accepted.
`AssetSourceBuilder` supports `with_reader`, `with_writer`,
`with_watcher`, `with_processed_reader`, `with_processed_writer`, and
`with_processed_watcher`.
Note that the "asset source" system replaces the old "asset providers"
system.
## Processing Multiple Sources
The `AssetProcessor` now supports multiple asset sources! Processed
assets can refer to assets in other sources and everything "just works".
Each `AssetSource` defines an unprocessed and processed `AssetReader` /
`AssetWriter`.
Currently this is all or nothing for a given `AssetSource`. A given
source is either processed or it is not. Later we might want to add
support for "lazy asset processing", where an `AssetSource` (such as a
remote server) can be configured to only process assets that are
directly referenced by local assets (in order to save local disk space
and avoid doing extra work).
## A new `AssetSource`: `embedded`
One of the big features motivating **Multiple Asset Sources** was
improving our "embedded-in-binary" asset loading. To prove out the
**Multiple Asset Sources** implementation, I chose to build a new
`embedded` `AssetSource`, which replaces the old `load_interal_asset!`
system.
The old `load_internal_asset!` approach had a number of issues:
* The `AssetServer` was not aware of (or capable of loading) internal
assets.
* Because internal assets weren't visible to the `AssetServer`, they
could not be processed (or used by assets that are processed). This
would prevent things "preprocessing shaders that depend on built in Bevy
shaders", which is something we desperately need to start doing.
* Each "internal asset" needed a UUID to be defined in-code to reference
it. This was very manual and toilsome.
The new `embedded` `AssetSource` enables the following pattern:
```rust
// Called in `crates/bevy_pbr/src/render/mesh.rs`
embedded_asset!(app, "mesh.wgsl");
// later in the app
let shader: Handle<Shader> = asset_server.load("embedded://bevy_pbr/render/mesh.wgsl");
```
Notice that this always treats the crate name as the "root path", and it
trims out the `src` path for brevity. This is generally predictable, but
if you need to debug you can use the new `embedded_path!` macro to get a
`PathBuf` that matches the one used by `embedded_asset`.
You can also reference embedded assets in arbitrary assets, such as WGSL
shaders:
```rust
#import "embedded://bevy_pbr/render/mesh.wgsl"
```
This also makes `embedded` assets go through the "normal" asset
lifecycle. They are only loaded when they are actually used!
We are also discussing implicitly converting asset paths to/from shader
modules, so in the future (not in this PR) you might be able to load it
like this:
```rust
#import bevy_pbr::render::mesh::Vertex
```
Compare that to the old system!
```rust
pub const MESH_SHADER_HANDLE: Handle<Shader> = Handle::weak_from_u128(3252377289100772450);
load_internal_asset!(app, MESH_SHADER_HANDLE, "mesh.wgsl", Shader::from_wgsl);
// The mesh asset is the _only_ accessible via MESH_SHADER_HANDLE and _cannot_ be loaded via the AssetServer.
```
## Hot Reloading `embedded`
You can enable `embedded` hot reloading by enabling the
`embedded_watcher` cargo feature:
```
cargo run --features=embedded_watcher
```
## Improved Hot Reloading Workflow
First: the `filesystem_watcher` cargo feature has been renamed to
`file_watcher` for brevity (and to match the `FileAssetReader` naming
convention).
More importantly, hot asset reloading is no longer configured in-code by
default. If you enable any asset watcher feature (such as `file_watcher`
or `rust_source_watcher`), asset watching will be automatically enabled.
This removes the need to _also_ enable hot reloading in your app code.
That means you can replace this:
```rust
app.add_plugins(DefaultPlugins.set(AssetPlugin::default().watch_for_changes()))
```
with this:
```rust
app.add_plugins(DefaultPlugins)
```
If you want to hot reload assets in your app during development, just
run your app like this:
```
cargo run --features=file_watcher
```
This means you can use the same code for development and deployment! To
deploy an app, just don't include the watcher feature
```
cargo build --release
```
My intent is to move to this approach for pretty much all dev workflows.
In a future PR I would like to replace `AssetMode::ProcessedDev` with a
`runtime-processor` cargo feature. We could then group all common "dev"
cargo features under a single `dev` feature:
```sh
# this would enable file_watcher, embedded_watcher, runtime-processor, and more
cargo run --features=dev
```
## AssetMode
`AssetPlugin::Unprocessed`, `AssetPlugin::Processed`, and
`AssetPlugin::ProcessedDev` have been replaced with an `AssetMode` field
on `AssetPlugin`.
```rust
// before
app.add_plugins(DefaultPlugins.set(AssetPlugin::Processed { /* fields here */ })
// after
app.add_plugins(DefaultPlugins.set(AssetPlugin { mode: AssetMode::Processed, ..default() })
```
This aligns `AssetPlugin` with our other struct-like plugins. The old
"source" and "destination" `AssetProvider` fields in the enum variants
have been replaced by the "asset source" system. You no longer need to
configure the AssetPlugin to "point" to custom asset providers.
## AssetServerMode
To improve the implementation of **Multiple Asset Sources**,
`AssetServer` was made aware of whether or not it is using "processed"
or "unprocessed" assets. You can check that like this:
```rust
if asset_server.mode() == AssetServerMode::Processed {
/* do something */
}
```
Note that this refactor should also prepare the way for building "one to
many processed output files", as it makes the server aware of whether it
is loading from processed or unprocessed sources. Meaning we can store
and read processed and unprocessed assets differently!
## AssetPath can now refer to folders
The "file only" restriction has been removed from `AssetPath`. The
`AssetServer::load_folder` API now accepts an `AssetPath` instead of a
`Path`, meaning you can load folders from other asset sources!
## Improved AssetPath Parsing
AssetPath parsing was reworked to support sources, improve error
messages, and to enable parsing with a single pass over the string.
`AssetPath::new` was replaced by `AssetPath::parse` and
`AssetPath::try_parse`.
## AssetWatcher broken out from AssetReader
`AssetReader` is no longer responsible for constructing `AssetWatcher`.
This has been moved to `AssetSourceBuilder`.
## Duplicate Event Debouncing
Asset V2 already debounced duplicate filesystem events, but this was
_input_ events. Multiple input event types can produce the same _output_
`AssetSourceEvent`. Now that we have `embedded_watcher`, which does
expensive file io on events, it made sense to debounce output events
too, so I added that! This will also benefit the AssetProcessor by
preventing integrity checks for duplicate events (and helps keep the
noise down in trace logs).
## Next Steps
* **Port Built-in Shaders**: Currently the primary (and essentially
only) user of `load_interal_asset` in Bevy's source code is "built-in
shaders". I chose not to do that in this PR for a few reasons:
1. We need to add the ability to pass shader defs in to shaders via meta
files. Some shaders (such as MESH_VIEW_TYPES) need to pass shader def
values in that are defined in code.
2. We need to revisit the current shader module naming system. I think
we _probably_ want to imply modules from source structure (at least by
default). Ideally in a way that can losslessly convert asset paths
to/from shader modules (to enable the asset system to resolve modules
using the asset server).
3. I want to keep this change set minimal / get this merged first.
* **Deprecate `load_internal_asset`**: we can't do that until we do (1)
and (2)
* **Relative Asset Paths**: This PR significantly increases the need for
relative asset paths (which was already pretty high). Currently when
loading dependencies, it is assumed to be an absolute path, which means
if in an `AssetLoader` you call `context.load("some/path/image.png")` it
will assume that is the "default" asset source, _even if the current
asset is in a different asset source_. This will cause breakage for
AssetLoaders that are not designed to add the current source to whatever
paths are being used. AssetLoaders should generally not need to be aware
of the name of their current asset source, or need to think about the
"current asset source" generally. We should build apis that support
relative asset paths and then encourage using relative paths as much as
possible (both via api design and docs). Relative paths are also
important because they will allow developers to move folders around
(even across providers) without reprocessing, provided there is no path
breakage.
# Objective
- According to the GLTF spec, it should not be possible to have a non
skinned mesh on a skinned node
> When the node contains skin, all mesh.primitives MUST contain JOINTS_0
and WEIGHTS_0 attributes
>
https://registry.khronos.org/glTF/specs/2.0/glTF-2.0.html#reference-node
- However, the reverse (a skinned mesh on a non skinned node) is just a
warning, see `NODE_SKINNED_MESH_WITHOUT_SKIN` in
https://github.com/KhronosGroup/glTF-Validator/blob/main/ISSUES.md#linkerror
- This causes a crash in Bevy because the bind group layout is made from
the mesh which is skinned, but filled from the entity which is not
```
thread '<unnamed>' panicked at 'wgpu error: Validation Error
Caused by:
In a RenderPass
note: encoder = `<CommandBuffer-(0, 5, Metal)>`
In a set_bind_group command
note: bind group = `<BindGroup-(27, 1, Metal)>`
Bind group 2 expects 2 dynamic offsets. However 1 dynamic offset were provided.
```
- Blender can export GLTF files with this kind of issues
## Solution
- When a skinned mesh is only used on non skinned nodes, ignore skinned
information from the mesh and warn the user (this is what three.js is
doing)
- When a skinned mesh is used on both skinned and non skinned nodes, log
an error
# Objective
Fixes#9676
Possible alternative to #9708
`Text2dBundles` are not currently drawn because the render-world-only
entities for glyphs that are created in `extract_text2d_sprite` are not
tracked by the per-view `VisibleEntities`.
## Solution
Add an `Option<Entity>` to `ExtractedSprite` that keeps track of the
original entity that caused a "glyph entity" to be created.
Use that in `queue_sprites` if it exists when checking view visibility.
## Benchmarks
Quick benchmarks. Average FPS over 1500 frames.
| bench | before fps | after fps | diff |
|-|-|-|-|
|many_sprites|884.93|879.00|🟡 -0.7%|
|bevymark -- --benchmark --waves 100 --per-wave 1000 --mode
sprite|75.99|75.93|🟡 -0.1%|
|bevymark -- --benchmark --waves 50 --per-wave 1000 --mode
mesh2d|32.85|32.58|🟡 -0.8%|
# Objective
cleanup some pbr shader code. improve shader stage io consistency and
make pbr.wgsl (probably many people's first foray into bevy shader code)
a little more human-readable. also fix a couple of small issues with
deferred rendering.
## Solution
mesh_vertex_output:
- rename to forward_io (to align with prepass_io)
- rename `MeshVertexOutput` to `VertexOutput` (to align with prepass_io)
- move `Vertex` from mesh.wgsl into here (to align with prepass_io)
prepass_io:
- remove `FragmentInput`, use `VertexOutput` directly (to align with
forward_io)
- rename `VertexOutput::clip_position` to `position` (to align with
forward_io)
pbr.wgsl:
- restructure so we don't need `#ifdefs` on the actual entrypoint, use
VertexOutput and FragmentOutput in all cases and use #ifdefs to import
the right struct definitions.
- rearrange to make the flow clearer
- move alpha_discard up from `pbr_functions::pbr` to avoid needing to
call it on some branches and not others
- add a bunch of comments
deferred_lighting:
- move ssao into the `!unlit` block to reflect forward behaviour
correctly
- fix compile error with deferred + premultiply_alpha
## Migration Guide
in custom material shaders:
- `pbr_functions::pbr` no longer calls to
`pbr_functions::alpha_discard`. if you were using the `pbr` function in
a custom shader with alpha mask mode you now also need to call
alpha_discard manually
- rename imports of `bevy_pbr::mesh_vertex_output` to
`bevy_pbr::forward_io`
- rename instances of `MeshVertexOutput` to `VertexOutput`
in custom material prepass shaders:
- rename instances of `VertexOutput::clip_position` to
`VertexOutput::position`
# Objective
Fixes#10069
## Solution
Extracted UI nodes were previously stored in a `SparseSet` and had a
predictable iteration order. UI borders and outlines relied on this. Now
they are stored in a HashMap and that is no longer true.
This adds `entity.index()` to the sort key for `TransparentUi` so that
the iteration order is predictable and the "border entities" that get
spawned during extraction are guaranteed to get drawn after their
respective container nodes again.
I **think** that everything still works for overlapping ui nodes etc,
because the z value / primary sort is still controlled by the "ui
stack."
Text above is just my current understanding. A rendering expert should
check this out.
I will do some more testing when I can.
# Objective
Fixes [#10061]
## Solution
Renamed `RenderInstance` to `ExtractInstance`, `RenderInstances` to
`ExtractedInstances` and `RenderInstancePlugin` to
`ExtractInstancesPlugin`
# Objective
- Add a [Deferred
Renderer](https://en.wikipedia.org/wiki/Deferred_shading) to Bevy.
- This allows subsequent passes to access per pixel material information
before/during shading.
- Accessing this per pixel material information is needed for some
features, like GI. It also makes other features (ex. Decals) simpler to
implement and/or improves their capability. There are multiple
approaches to accomplishing this. The deferred shading approach works
well given the limitations of WebGPU and WebGL2.
Motivation: [I'm working on a GI solution for
Bevy](https://youtu.be/eH1AkL-mwhI)
# Solution
- The deferred renderer is implemented with a prepass and a deferred
lighting pass.
- The prepass renders opaque objects into the Gbuffer attachment
(`Rgba32Uint`). The PBR shader generates a `PbrInput` in mostly the same
way as the forward implementation and then [packs it into the
Gbuffer](ec1465559f/crates/bevy_pbr/src/render/pbr.wgsl (L168)).
- The deferred lighting pass unpacks the `PbrInput` and [feeds it into
the pbr()
function](ec1465559f/crates/bevy_pbr/src/deferred/deferred_lighting.wgsl (L65)),
then outputs the shaded color data.
- There is now a resource
[DefaultOpaqueRendererMethod](ec1465559f/crates/bevy_pbr/src/material.rs (L599))
that can be used to set the default render method for opaque materials.
If materials return `None` from
[opaque_render_method()](ec1465559f/crates/bevy_pbr/src/material.rs (L131))
the `DefaultOpaqueRendererMethod` will be used. Otherwise, custom
materials can also explicitly choose to only support Deferred or Forward
by returning the respective
[OpaqueRendererMethod](ec1465559f/crates/bevy_pbr/src/material.rs (L603))
- Deferred materials can be used seamlessly along with both opaque and
transparent forward rendered materials in the same scene. The [deferred
rendering
example](https://github.com/DGriffin91/bevy/blob/deferred/examples/3d/deferred_rendering.rs)
does this.
- The deferred renderer does not support MSAA. If any deferred materials
are used, MSAA must be disabled. Both TAA and FXAA are supported.
- Deferred rendering supports WebGL2/WebGPU.
## Custom deferred materials
- Custom materials can support both deferred and forward at the same
time. The
[StandardMaterial](ec1465559f/crates/bevy_pbr/src/render/pbr.wgsl (L166))
does this. So does [this
example](https://github.com/DGriffin91/bevy_glowy_orb_tutorial/blob/deferred/assets/shaders/glowy.wgsl#L56).
- Custom deferred materials that require PBR lighting can create a
`PbrInput`, write it to the deferred GBuffer and let it be rendered by
the `PBRDeferredLightingPlugin`.
- Custom deferred materials that require custom lighting have two
options:
1. Use the base_color channel of the `PbrInput` combined with the
`STANDARD_MATERIAL_FLAGS_UNLIT_BIT` flag.
[Example.](https://github.com/DGriffin91/bevy_glowy_orb_tutorial/blob/deferred/assets/shaders/glowy.wgsl#L56)
(If the unlit bit is set, the base_color is stored as RGB9E5 for extra
precision)
2. A Custom Deferred Lighting pass can be created, either overriding the
default, or running in addition. The a depth buffer is used to limit
rendering to only the required fragments for each deferred lighting
pass. Materials can set their respective depth id via the
[deferred_lighting_pass_id](b79182d2a3/crates/bevy_pbr/src/prepass/prepass_io.wgsl (L95))
attachment. The custom deferred lighting pass plugin can then set [its
corresponding
depth](ec1465559f/crates/bevy_pbr/src/deferred/deferred_lighting.wgsl (L37)).
Then with the lighting pass using
[CompareFunction::Equal](ec1465559f/crates/bevy_pbr/src/deferred/mod.rs (L335)),
only the fragments with a depth that equal the corresponding depth
written in the material will be rendered.
Custom deferred lighting plugins can also be created to render the
StandardMaterial. The default deferred lighting plugin can be bypassed
with `DefaultPlugins.set(PBRDeferredLightingPlugin { bypass: true })`
---------
Co-authored-by: nickrart <nickolas.g.russell@gmail.com>
# Objective
While using joysticks for player aiming, I noticed that there was as
`0.05` value snap on the axis. After searching through Bevy's code, I
saw it was the default livezone being at `0.95`. This causes any value
higher to snap to `1.0`. I think `1.0` and `-1.0` would be a better
default, as it gives all values to the joystick arc.
This default livezone stumped me for a bit as I thought either something
was broken or I was doing something wrong.
## Solution
Change the livezone defaults to ` livezone_upperbound: 1.0` and
`livezone_lowerbound: -1.0`.
---
## Migration Guide
If the default 0.05 was relied on, the default or gamepad `AxisSettings`
on the resource `GamepadSettings` will have to be changed.
# Objective
- Fixes#8303
## Solution
- Replaced 1 instance of `OnceBox<T>` with `OnceLock<T>` in
`NonGenericTypeCell`
## Notes
All changes are in the private side of Bevy, and appear to have no
observable change in performance or compilation time. This is purely to
reduce the quantity of direct dependencies in Bevy.
# Objective
- The filter type on the `apply_global_wireframe_material` system had
duplicate filter code and the `clippy::type_complexity` attribute.
## Solution
- Extract the common part of the filter into a type alias
# Objective
- Use the `Material` abstraction for the Wireframes
- Right now this doesn't have many benefits other than simplifying some
of the rendering code
- We can reuse the default vertex shader and avoid rendering
inconsistencies
- The goal is to have a material with a color on each mesh so this
approach will make it easier to implement
- Originally done in https://github.com/bevyengine/bevy/pull/5303 but I
decided to split the Material part to it's own PR and then adding
per-entity colors and globally configurable colors will be a much
simpler diff.
## Solution
- Use the new `Material` abstraction for the Wireframes
## Notes
It's possible this isn't ideal since this adds a
`Handle<WireframeMaterial>` to all the meshes compared to the original
approach that didn't need anything. I didn't notice any performance
impact on my machine.
This might be a surprising usage of `Material` at first, because
intuitively you only have one material per mesh, but the way it's
implemented you can have as many different types of materials as you
want on a mesh.
## Migration Guide
`WireframePipeline` was removed. If you were using it directly, please
create an issue explaining your use case.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Add serde Deserialize and Serialize for structs that doesn't implement
it, even if they could benefit from it
## Solution
- Derive these traits for the structs Style, BackgroundColor,
BorderColor and Outline.
---
Adopted from #8954, co-authored by @pyrotechnick
# Objective
The Bevy ecosystem currently reflects `Quat` via "value" rather than the
more appropriate "struct" strategy. This behaviour is inconsistent to
that of similar types, i.e. `Vec3`. Additionally, employing the "value"
strategy causes instances of `Quat` to be serialised as a sequence `[x,
y, z, w]` rather than structures of shape `{ x, y, z, w }`.
The [comments surrounding the applicable
code](bec299fa6e/crates/bevy_reflect/src/impls/glam.rs (L254))
give context and historical reasons for this discrepancy:
```
// Quat fields are read-only (as of now), and reflection is currently missing
// mechanisms for read-only fields. I doubt those mechanisms would be added,
// so for now quaternions will remain as values. They are represented identically
// to Vec4 and DVec4, so you may use those instead and convert between.
```
This limitation has [since been lifted by the upstream
crate](374625163e),
glam.
## Solution
Migrating the reflect strategy of Quat from "value" to "struct" via
replacing `impl_reflect_value` with `impl_reflect_struct` resolves the
issue.
## Changelog
Migrated `Quat` reflection strategy to "struct" from "value"
Migration Guide
Changed Quat serialization/deserialization from sequences `[x, y, z, w]`
to structures `{ x, y, z, w }`.
---------
Co-authored-by: pyrotechnick <13998+pyrotechnick@users.noreply.github.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
~~Currently blocked on an upstream bug that causes crashes when
minimizing/resizing on dx12 https://github.com/gfx-rs/wgpu/issues/3967~~
wgpu 0.17.1 is out which fixes it
# Objective
Keep wgpu up to date.
## Solution
Update wgpu and naga_oil.
Currently this depends on an unreleased (and unmerged) branch of
naga_oil, and hasn't been properly tested yet.
The wgpu side of this seems to have been an extremely trivial upgrade
(all the upgrade work seems to be in naga_oil). This also lets us remove
the workarounds for pack/unpack4x8unorm in the SSAO shaders.
Lets us close the dx12 part of
https://github.com/bevyengine/bevy/issues/8888
related: https://github.com/bevyengine/bevy/issues/9304
---
## Changelog
Update to wgpu 0.17 and naga_oil 0.9
# Objective
- This PR aims to make creating meshes a little bit more ergonomic,
specifically by removing the need for intermediate mutable variables.
## Solution
- We add methods that consume the `Mesh` and return a mesh with the
specified changes, so that meshes can be entirely constructed via
builder-style calls, without intermediate variables;
- Methods are flagged with `#[must_use]` to ensure proper use;
- Examples are updated to use the new methods where applicable. Some
examples are kept with the mutating methods so that users can still
easily discover them, and also where the new methods wouldn't really be
an improvement.
## Examples
Before:
```rust
let mut mesh = Mesh::new(PrimitiveTopology::TriangleList);
mesh.insert_attribute(Mesh::ATTRIBUTE_POSITION, vs);
mesh.insert_attribute(Mesh::ATTRIBUTE_NORMAL, vns);
mesh.insert_attribute(Mesh::ATTRIBUTE_UV_0, vts);
mesh.set_indices(Some(Indices::U32(tris)));
mesh
```
After:
```rust
Mesh::new(PrimitiveTopology::TriangleList)
.with_inserted_attribute(Mesh::ATTRIBUTE_POSITION, vs)
.with_inserted_attribute(Mesh::ATTRIBUTE_NORMAL, vns)
.with_inserted_attribute(Mesh::ATTRIBUTE_UV_0, vts)
.with_indices(Some(Indices::U32(tris)))
```
Before:
```rust
let mut cube = Mesh::from(shape::Cube { size: 1.0 });
cube.generate_tangents().unwrap();
PbrBundle {
mesh: meshes.add(cube),
..default()
}
```
After:
```rust
PbrBundle {
mesh: meshes.add(
Mesh::from(shape::Cube { size: 1.0 })
.with_generated_tangents()
.unwrap(),
),
..default()
}
```
---
## Changelog
- Added consuming builder methods for more ergonomic `Mesh` creation:
`with_inserted_attribute()`, `with_removed_attribute()`,
`with_indices()`, `with_duplicated_vertices()`,
`with_computed_flat_normals()`, `with_generated_tangents()`,
`with_morph_targets()`, `with_morph_target_names()`.
# Objective
Closes#9955.
Use the same interface for all "pure" builder types: taking and
returning `Self` (and not `&mut Self`).
## Solution
Changed `DynamicSceneBuilder`, `SceneFilter` and `TableBuilder` to take
and return `Self`.
## Changelog
### Changed
- `DynamicSceneBuilder` and `SceneBuilder` methods in `bevy_ecs` now
take and return `Self`.
## Migration guide
When using `bevy_ecs::DynamicSceneBuilder` and `bevy_ecs::SceneBuilder`,
instead of binding the builder to a variable, directly use it. Methods
on those types now consume `Self`, so you will need to re-bind the
builder if you don't `build` it immediately.
Before:
```rust
let mut scene_builder = DynamicSceneBuilder::from_world(&world);
let scene = scene_builder.extract_entity(a).extract_entity(b).build();
```
After:
```rust
let scene = DynamicSceneBuilder::from_world(&world)
.extract_entity(a)
.extract_entity(b)
.build();
```
# Objective
Spatial audio was heroically thrown together at the last minute for Bevy
0.10, but right now it's a bit of a pain to use -- users need to
manually update audio sinks with the position of the listener / emitter.
Hopefully the migration guide entry speaks for itself.
## Solution
Add a new `SpatialListener` component and automatically update sinks
with the position of the listener and and emitter.
## Changelog
`SpatialAudioSink`s are now automatically updated with positions of
emitters and listeners.
## Migration Guide
Spatial audio now automatically uses the transform of the `AudioBundle`
and of an entity with a `SpatialListener` component.
If you were manually scaling emitter/listener positions, you can use the
`spatial_scale` field of `AudioPlugin` instead.
```rust
// Old
commands.spawn(
SpatialAudioBundle {
source: asset_server.load("sounds/Windless Slopes.ogg"),
settings: PlaybackSettings::LOOP,
spatial: SpatialSettings::new(listener_position, gap, emitter_position),
},
);
fn update(
emitter_query: Query<(&Transform, &SpatialAudioSink)>,
listener_query: Query<&Transform, With<Listener>>,
) {
let listener = listener_query.single();
for (transform, sink) in &emitter_query {
sink.set_emitter_position(transform.translation);
sink.set_listener_position(*listener, gap);
}
}
// New
commands.spawn((
SpatialBundle::from_transform(Transform::from_translation(emitter_position)),
AudioBundle {
source: asset_server.load("sounds/Windless Slopes.ogg"),
settings: PlaybackSettings::LOOP.with_spatial(true),
},
));
commands.spawn((
SpatialBundle::from_transform(Transform::from_translation(listener_position)),
SpatialListener::new(gap),
));
```
## Discussion
I removed `SpatialAudioBundle` because the `SpatialSettings` component
was made mostly redundant, and without that it was identical to
`AudioBundle`.
`SpatialListener` is a bare component and not a bundle which is feeling
like a maybe a strange choice. That happened from a natural aversion
both to nested bundles and to duplicating `Transform` etc in bundles and
from figuring that it is likely to just be tacked on to some other
bundle (player, head, camera) most of the time.
Let me know what you think about these things / everything else.
---------
Co-authored-by: Mike <mike.hsu@gmail.com>
# Objective
- Followup to #7184.
- ~Deprecate `TypeUuid` and remove its internal references.~ No longer
part of this PR.
- Use `TypePath` for the type registry, and (de)serialisation instead of
`std::any::type_name`.
- Allow accessing type path information behind proxies.
## Solution
- Introduce methods on `TypeInfo` and friends for dynamically querying
type path. These methods supersede the old `type_name` methods.
- Remove `Reflect::type_name` in favor of `DynamicTypePath::type_path`
and `TypeInfo::type_path_table`.
- Switch all uses of `std::any::type_name` in reflection, non-debugging
contexts to use `TypePath`.
---
## Changelog
- Added `TypePathTable` for dynamically accessing methods on `TypePath`
through `TypeInfo` and the type registry.
- Removed `type_name` from all `TypeInfo`-like structs.
- Added `type_path` and `type_path_table` methods to all `TypeInfo`-like
structs.
- Removed `Reflect::type_name` in favor of
`DynamicTypePath::reflect_type_path` and `TypeInfo::type_path`.
- Changed the signature of all `DynamicTypePath` methods to return
strings with a static lifetime.
## Migration Guide
- Rely on `TypePath` instead of `std::any::type_name` for all stability
guarantees and for use in all reflection contexts, this is used through
with one of the following APIs:
- `TypePath::type_path` if you have a concrete type and not a value.
- `DynamicTypePath::reflect_type_path` if you have an `dyn Reflect`
value without a concrete type.
- `TypeInfo::type_path` for use through the registry or if you want to
work with the represented type of a `DynamicFoo`.
- Remove `type_name` from manual `Reflect` implementations.
- Use `type_path` and `type_path_table` in place of `type_name` on
`TypeInfo`-like structs.
- Use `get_with_type_path(_mut)` over `get_with_type_name(_mut)`.
## Note to reviewers
I think if anything we were a little overzealous in merging #7184 and we
should take that extra care here.
In my mind, this is the "point of no return" for `TypePath` and while I
think we all agree on the design, we should carefully consider if the
finer details and current implementations are actually how we want them
moving forward.
For example [this incorrect `TypePath` implementation for
`String`](3fea3c6c0b/crates/bevy_reflect/src/impls/std.rs (L90))
(note that `String` is in the default Rust prelude) snuck in completely
under the radar.
