# Objective
The new render graph labels do not (and cannot) implement normal
Reflect, which breaks spawning scenes with cameras (including GLTF
scenes). Likewise, the new `CameraMainTextureUsages` also does not (and
cannot) implement normal Reflect because it uses `wgpu::TextureUsages`
under the hood.
Fixes#11852
## Solution
This implements minimal "reflect value" for `CameraRenderGraph` and
`CameraMainTextureUsages` and registers the types, which satisfies our
spawn logic.
Note that this _does not_ fix scene serialization for these types, which
will require more significant changes. We will especially need to think
about how (and if) "interned labels" will fit into the scene system. For
the purposes of 0.13, I think this is the best we can do. Given that
this serialization issue is prevalent throughout Bevy atm, I'm ok with
adding a couple more to the pile. When we roll out the new scene system,
we will be forced to solve these on a case-by-case basis.
---
## Changelog
- Implement Reflect (value) for `CameraMainTextureUsages` and
`CameraRenderGraph`, and register those types.
# Objective
#10644 introduced nice "statically typed" labels that replace the old
strings. I would like to propose some changes to the names introduced:
* `SubGraph2d` -> `Core2d` and `SubGraph3d` -> `Core3d`. The names of
these graphs have been / should continue to be the "core 2d" graph not
the "sub graph 2d" graph. The crate is called `bevy_core_pipeline`, the
modules are still `core_2d` and `core_3d`, etc.
* `Labels2d` and `Labels3d`, at the very least, should not be plural to
follow naming conventions. A Label enum is not a "collection of labels",
it is a _specific_ Label. However I think `Label2d` and `Label3d` is
significantly less clear than `Node2d` and `Node3d`, so I propose those
changes here. I've done the same for `LabelsPbr` -> `NodePbr` and
`LabelsUi` -> `NodeUi`
Additionally, #10644 accidentally made one of the Camera2dBundle
constructors use the 3D graph instead of the 2D graph. I've fixed that
here.
---
## Changelog
* Renamed `SubGraph2d` -> `Core2d`, `SubGraph3d` -> `Core3d`, `Labels2d`
-> `Node2d`, `Labels3d` -> `Node3d`, `LabelsUi` -> `NodeUi`, `LabelsPbr`
-> `NodePbr`
# Objective
Provide a public replacement for `Into<MeshUniform>` trait impl which
was removed by #10231.
I made use of this in the `bevy_mod_outline` crate and will have to
duplicate this function if it's not accessible.
## Solution
Change the MeshUniform::new() method to be public.
# Objective
After adding configurable exposure, we set the default ev100 value to
`7` (indoor). This brought us out of sync with Blender's configuration
and defaults. This PR changes the default to `9.7` (bright indoor or
very overcast outdoors), as I calibrated in #11577. This feels like a
very reasonable default.
The other changes generally center around tweaking Bevy's lighting
defaults and examples to play nicely with this number, alongside a few
other tweaks and improvements.
Note that for artistic reasons I have reverted some examples, which
changed to directional lights in #11581, back to point lights.
Fixes#11577
---
## Changelog
- Changed `Exposure::ev100` from `7` to `9.7` to better match Blender
- Renamed `ExposureSettings` to `Exposure`
- `Camera3dBundle` now includes `Exposure` for discoverability
- Bumped `FULL_DAYLIGHT ` and `DIRECT_SUNLIGHT` to represent the
middle-to-top of those ranges instead of near the bottom
- Added new `AMBIENT_DAYLIGHT` constant and set that as the new
`DirectionalLight` default illuminance.
- `PointLight` and `SpotLight` now have a default `intensity` of
1,000,000 lumens. This makes them actually useful in the context of the
new "semi-outdoor" exposure and puts them in the "cinema lighting"
category instead of the "common household light" category. They are also
reasonably close to the Blender default.
- `AmbientLight` default has been bumped from `20` to `80`.
## Migration Guide
- The increased `Exposure::ev100` means that all existing 3D lighting
will need to be adjusted to match (DirectionalLights, PointLights,
SpotLights, EnvironmentMapLights, etc). Or alternatively, you can adjust
the `Exposure::ev100` on your cameras to work nicely with your current
lighting values. If you are currently relying on default intensity
values, you might need to change the intensity to achieve the same
effect. Note that in Bevy 0.12, point/spot lights had a different hard
coded ev100 value than directional lights. In Bevy 0.13, they use the
same ev100, so if you have both in your scene, the _scale_ between these
light types has changed and you will likely need to adjust one or both
of them.
# Objective
Fix https://github.com/bevyengine/bevy/issues/11577.
## Solution
Fix the examples, add a few constants to make setting light values
easier, and change the default lighting settings to be more realistic.
(Now designed for an overcast day instead of an indoor environment)
---
I did not include any example-related changes in here.
## Changelogs (not including breaking changes)
### bevy_pbr
- Added `light_consts` module (included in prelude), which contains
common lux and lumen values for lights.
- Added `AmbientLight::NONE` constant, which is an ambient light with a
brightness of 0.
- Added non-EV100 variants for `ExposureSettings`'s EV100 constants,
which allow easier construction of an `ExposureSettings` from a EV100
constant.
## Breaking changes
### bevy_pbr
The several default lighting values were changed:
- `PointLight`'s default `intensity` is now `2000.0`
- `SpotLight`'s default `intensity` is now `2000.0`
- `DirectionalLight`'s default `illuminance` is now
`light_consts::lux::OVERCAST_DAY` (`1000.`)
- `AmbientLight`'s default `brightness` is now `20.0`
# Objective
- The current implementations for `&Visibility == Visibility` and
`Visibility == &Visibility` are ambiguous, so they raise a warning for
being unconditionally recursive.
- `TaskPool`'s `LOCAL_EXECUTOR` thread local calls a `const` constructor
in a non-`const` context.
## Solution
- Make `&Visibility == Visibility` and `Visibility == &Visibility`
implementations use `Visibility == Visibility`.
- Wrap `LocalExecutor::new` in a special `const` block supported by
[`thread_local`](https://doc.rust-lang.org/stable/std/macro.thread_local.html).
---
This lints were found by running:
```shell
$ cargo clippy --workspace
```
There are a few other warnings that were more complicated, so I chose
not to include them in this PR.
<details>
<summary>Here they are...</summary>
```shell
warning: function cannot return without recursing
--> crates/bevy_utils/src/cow_arc.rs:92:5
|
92 | / fn eq(&self, other: &Self) -> bool {
93 | | self.deref().eq(other.deref())
94 | | }
| |_____^
|
note: recursive call site
--> crates/bevy_utils/src/cow_arc.rs:93:9
|
93 | self.deref().eq(other.deref())
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
warning: method `get_path` is never used
--> crates/bevy_reflect/src/serde/de.rs:26:8
|
25 | trait StructLikeInfo {
| -------------- method in this trait
26 | fn get_path(&self) -> &str;
| ^^^^^^^^
|
= note: `#[warn(dead_code)]` on by default
warning: methods `get_path` and `get_field` are never used
--> crates/bevy_reflect/src/serde/de.rs:34:8
|
33 | trait TupleLikeInfo {
| ------------- methods in this trait
34 | fn get_path(&self) -> &str;
| ^^^^^^^^
35 | fn get_field(&self, index: usize) -> Option<&UnnamedField>;
| ^^^^^^^^^
```
The other warnings are fixed by #11865.
</details>
# Objective
- There are multiple instances of `let Some(x) = ... else { None };`
throughout the project.
- Because `Option<T>` implements
[`Try`](https://doc.rust-lang.org/stable/std/ops/trait.Try.html), it can
use the question mark `?` operator.
## Solution
- Use question mark operator instead of `let Some(x) = ... else { None
}`.
---
There was another PR that did a similar thing a few weeks ago, but I
couldn't find it.
# Objective
I tried using `insert_gizmo_group` to configure my physics gizmos in a
bevy_xpbd example, but was surprised to see that nothing happened. I
found out that the method does *not* overwrite gizmo groups that have
already been initialized (with `init_gizmo_group`). This is unexpected,
since methods like `insert_resource` *do* overwrite.
## Solution
Insert the configuration even if it has already been initialized.
# Objective
`RenderMeshInstance::material_bind_group_id` is only set from
`queue_material_meshes::<M>`. this field is used (only) for determining
batch groups, so some items may be batched incorrectly if they have
never been in the camera's view or if they don't use the Material
abstraction.
in particular, shadow views render more meshes than the main camera, and
currently batch some meshes where the object has never entered the
camera view together. this is quite hard to trigger, but should occur in
a scene with out-of-view alpha-mask materials (so that the material
instance actually affects the shadow) in the path of a light.
this is also a footgun for custom pipelines: failing to set the
material_bind_group_id will result in all meshes being batched together
and all using the closest/furthest material to the camera (depending on
sort order).
## Solution
- queue_shadows now sets the material_bind_group_id correctly
- `MeshPipeline` doesn't attempt to batch meshes if the
material_bind_group_id has not been set. custom pipelines still need to
set this field to take advantage of batching, but will at least render
correctly if it is not set
# Objective
sysinfo was updated to 0.30 in #11071. Ever since then the `cpu` field
of the `SystemInfo` struct that gets printed every time one starts an
bevy app has been empty. This is because the following part of the
sysinfo migration guide was overlooked:
---
### `Cpu` changes
Information like `Cpu::brand`, `Cpu::vendor_id` or `Cpu::frequency` are
not set on the "global" CPU.
---
## Solution
- Get the CPU brand information from a specific CPU instead. In this
case, just choose the first one. It's theoretically possible for
different CPUs to have different names, but in practice this doesn't
really happen I think. Even Intel's newer hybrid processors use a
uniform name for all CPUs in my experience.
- We can use this opportunity to also update our `sysinfo::System`
initialization here to only fetch the information we're interested in.
Make the renamings/changes regarding texture atlases a bit less
confusing by calling `TextureAtlasLayout` a layout, not a texture atlas.
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
It can sometimes be useful to combine several meshes into one. This
allows constructing more complex meshes out of simple primitives without
needing to use a 3D modeling program or entity hierarchies.
This could also be used internally to increase code reuse by using
existing mesh generation logic for e.g. circles and using that in
cylinder mesh generation logic to add the top and bottom of the
cylinder.
**Note**: This is *not* implementing CSGs (Constructive Solid Geometry)
or any boolean operations, as that is much more complex. This is simply
adding the mesh data of another mesh to a mesh.
## Solution
Add a `merge` method to `Mesh`. It appends the vertex attributes and
indices of `other` to `self`, resulting in a `Mesh` that is the
combination of the two.
For example, you could do this:
```rust
let mut cuboid = Mesh::from(shape::Box::default());
let mut cylinder = Mesh::from(shape::Cylinder::default());
let mut torus = Mesh::from(shape::Torus::default());
cuboid.merge(cylinder);
cuboid.merge(torus);
```
This would result in `cuboid` being a `Mesh` that also has the cylinder
mesh and torus mesh. In this case, they would just be placed on top of
each other, but by utilizing #11454 we can transform the cylinder and
torus to get a result like this:
https://github.com/bevyengine/bevy/assets/57632562/557402c6-b896-4aba-bd95-312e7d1b5238
This is just a single entity and a single mesh.
# Objective
- Fixes#11782.
## Solution
- Remove the run condition for `apply_global_wireframe_material`, since
it prevent detecting when meshes are added or the `NoWireframe` marker
component is removed from an entity. Alternatively this could be done by
using a run condition like "added `Handle<Mesh>` or removed
`NoWireframe` or `WireframeConfig` changed" but this seems less clear to
me than directly letting the queries on
`apply_global_wireframe_material` do the filtering.
# Objective
-
[`crossbeam::scope`](https://docs.rs/crossbeam/latest/crossbeam/fn.scope.html)
is soft-deprecated in favor of the standard library's implementation.
## Solution
- Replace reference in `TaskPool`'s docs to mention `std:🧵:scope`
instead.
# Objective
- Fixes#11695
## Solution
- Added `delta: Option<Vec2>` to `bevy_window::CursorMoved`. `delta` is
an `Option` because the `CursorMoved` event does get fired when the
cursor was outside the window area in the last frame. In that case there
is no cursor position from the last frame to compare with the current
cursor position.
---
## Changelog
- Added `delta: Option<Vec2>` to `bevy_window::CursorMoved`.
## Migration Guide
- You need to add `delta` to any manually created `CursorMoved` struct.
---------
Co-authored-by: Kanabenki <lucien.menassol@gmail.com>
Co-authored-by: James Liu <contact@jamessliu.com>
# Objective
- Fixes#11638
- See
[here](https://github.com/bevyengine/bevy/issues/11638#issuecomment-1920508465)
for details on the cause of this issue.
## Solution
- Modified `AssetLoaders` to capture possibility of multiple
`AssetLoader` registrations operating on the same `Asset` type, but
different extensions.
- Added an algorithm which will attempt to resolve via `AssetLoader`
name, then `Asset` type, then by extension. If at any point multiple
loaders fit a particular criteria, the next criteria is used as a tie
breaker.
# Objective
At the start of every schedule run, there's currently a guaranteed piece
of overhead as the async executor spawns the MultithreadeExecutor task
onto one of the ComputeTaskPool threads.
## Solution
Poll the executor once to immediately schedule systems without waiting
for the async executor, then spawn the task if and only if the executor
does not immediately terminate.
On a similar note, having the executor task immediately start executing
a system in the same async task might yield similar results over a
broader set of cases. However, this might be more involved, and may need
a solution like #8304.
# Objective
When applying a command, we currently use double indirection for the
world reference `&mut Option<&mut World>`. Since this is used across a
`fn` pointer boundary, this can't get optimized away.
## Solution
Reborrow the world reference and pass `Option<&mut World>` instead.
# Objective
Scheduling low cost systems has significant overhead due to task pool
contention and the extra machinery to schedule and run them. Following
the example of #7728, `asset_events` is good example of this kind of
system, where there is no work to be done when there are no queued asset
events.
## Solution
Put a run condition on it that checks if there are any queued events.
## Performance
Tested against `many_foxes`, we can see a slight improvement in the
total time spent in `UpdateAssets`. Also noted much less volatility due
to not being at the whim of the OS thread scheduler.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
The code in `bevy_reflect_derive` could use some cleanup.
## Solution
Took some of the changes in #11659 to create a dedicated PR for cleaning
up the field and container attribute logic.
#### Updated Naming
I renamed `ReflectTraits` and `ReflectFieldAttr` to
`ContainerAttributes` and `FieldAttributes`, respectively. I think these
are clearer.
#### Updated Parsing
##### Readability
The parsing logic wasn't too bad before, but it was getting difficult to
read. There was some duplicated logic between `Meta::List` and
`Meta::Path` attributes. Additionally, all the logic was kept inside a
large method.
To simply things, I replaced the nested meta parsing with `ParseStream`
parsing. In my opinion, this is easier to follow since it breaks up the
large match statement into a small set of single-line if statements,
where each if-block contains a single call to the appropriate attribute
parsing method.
##### Flexibility
On top of the added simplicity, this also makes our attribute parsing
much more flexible. It allows us to more elegantly handle custom where
clauses (i.e. `#[reflect(where T: Foo)]`) and it opens the door for more
non-standard attribute syntax (e.g. #11659).
##### Errors
This also allows us to automatically provide certain errors when
parsing. For example, since we can use `stream.lookahead1()`, we get
errors like the following for free:
```
error: expected one of: `ignore`, `skip_serializing`, `default`
--> crates/bevy_reflect/src/lib.rs:1988:23
|
1988 | #[reflect(foo)]
| ^^^
```
---
## Changelog
> [!note]
> All changes are internal to `bevy_reflect_derive` and should not
affect the public API[^1].
- Renamed `ReflectTraits` to `ContainerAttributes`
- Renamed `ReflectMeta::traits` to `ReflectMeta::attrs`
- Renamed `ReflectFieldAttr` to `FieldAttributes`
- Updated parsing logic for field/container attribute parsing
- Now uses a `ParseStream` directly instead of nested meta parsing
- General code cleanup of the field/container attribute modules for
`bevy_reflect_derive`
[^1]: Does not include errors, which may look slightly different.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Bevy's change detection functionality is invaluable for writing robust
apps, but it only works in the context of systems and exclusive systems.
Oftentimes it is necessary to detect changes made in earlier code
without having to place the code in separate systems, but it is not
currently possible to do so since there is no way to set the value of
`World::last_change_tick`.
`World::clear_trackers` allows you to update the change tick, but this
has unintended side effects, since it irreversibly affects the behavior
of change and removal detection for the entire app.
## Solution
Add a method `World::last_change_tick_scope`. This allows you to set
`last_change_tick` to a specific value for a region of code. To ensure
that misuse doesn't break unrelated functions, we restore the world's
original change tick at the end of the provided scope.
### Example
A function that uses this to run an update loop repeatedly, allowing
each iteration of the loop to react to changes made in the previous loop
iteration.
```rust
fn update_loop(
world: &mut World,
mut update_fn: impl FnMut(&mut World) -> std::ops::ControlFlow<()>,
) {
let mut last_change_tick = world.last_change_tick();
// Repeatedly run the update function until it requests a break.
loop {
// Update once.
let control_flow = world.last_change_tick_scope(last_change_tick, |world| {
update_fn(world)
});
// End the loop when the closure returns `ControlFlow::Break`.
if control_flow.is_break() {
break;
}
// Increment the change tick so the next update can detect changes from this update.
last_change_tick = world.change_tick();
world.increment_change_tick();
}
}
```
---
## Changelog
+ Added `World::last_change_tick_scope`, which allows you to specify the
reference for change detection within a certain scope.
# Objective
- Part of #11590.
## Solution
- Fix `unsafe_op_in_unsafe_fn` for `bevy_dynamic_plugin`.
---
## Changelog
- Added further restrictions to the safety requirements of
`bevy_dynamic_plugin::dynamically_load_plugin`.
---
I had a few issues, specifically with the safety comment on
`dynamically_load_plugin`. There are three different unsafe functions
called within the function body, and they all need their own
justification / message.
Also, would it be unsound to call `dynamically_load_plugin` multiple
times on the same file? I feel the documentation needs to be more clear.
# Objective
Reduce the size of `bevy_utils`
(https://github.com/bevyengine/bevy/issues/11478)
## Solution
Move `EntityHash` related types into `bevy_ecs`. This also allows us
access to `Entity`, which means we no longer need `EntityHashMap`'s
first generic argument.
---
## Changelog
- Moved `bevy::utils::{EntityHash, EntityHasher, EntityHashMap,
EntityHashSet}` into `bevy::ecs::entity::hash` .
- Removed `EntityHashMap`'s first generic argument. It is now hardcoded
to always be `Entity`.
## Migration Guide
- Uses of `bevy::utils::{EntityHash, EntityHasher, EntityHashMap,
EntityHashSet}` now have to be imported from `bevy::ecs::entity::hash`.
- Uses of `EntityHashMap` no longer have to specify the first generic
parameter. It is now hardcoded to always be `Entity`.
# Objective
Loading some textures from the days of yonder give me errors cause the
mipmap level is 0
## Solution
Set a minimum of 1
## Changelog
Make mipmap level at least 1
# Objective
Use `GamepadButtonType` with library that requires `Ord`.
## Motivation
`KeyCode` derives `Ord` that I'm using with a trie for recognizing
[input
sequences](https://github.com/shanecelis/bevy-input-sequence/tree/trie).
I would like to do the same for `GamepadButtonType` but am stymied by it
not deriving `Ord`.
## Solution
This PR add derivations PartialOrd and Ord for `GamepadButtonType`.
## Workaround
If deriving `Ord` is not possible, I'd be happy to know how I might
coerce `GamepadButtonType` into a `u32` or something else that is `Ord`,
so I can wrap `GamepadButtonType` in a newtype. I suppose serializing
with serde may work or reflect?
# Objective
- Get rid of unwraps in winit fullscreen handling code, which are the
source of some crashes.
- Fix#11275
## Solution
- Replace the unwraps with warnings. Ignore the fullscreen request, do
nothing instead.
# Objective
It would be useful to be able to inspect a `QueryState`'s accesses so we
can detect when the data it accesses changes without having to iterate
it. However there are two things preventing this:
* These accesses are unnecessarily encapsulated.
* `Has<T>` indirectly accesses `T`, but does not register it.
## Solution
* Expose accesses and matches used by `QueryState`.
* Add the notion of "archetypal" accesses, which are not accessed
directly, but whose presence in an archetype affects a query result.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
I want to keep track of despawned entities.
I am aware of
[`RemovedComponents`](https://docs.rs/bevy/0.12.1/bevy/ecs/prelude/struct.RemovedComponents.html).
However, the docs don't explicitly mention that despawned entities are
also included in this event iterator.
I searched through the bevy tests to find `removal_tracking` in
`crates/bevy_ecs/src/system/mod.rs` that confirmed the behavior:
```rust
...
assert_eq!(
removed_i32.read().collect::<Vec<_>>(),
&[despawned.0],
"despawning causes the correct entity to show up in the 'RemovedComponent' system parameter."
);
...
```
## Solution
- Explicitly mention this behavior in docs.
This fixes a `FIXME` in `extract_meshes` and results in a performance
improvement.
As a result of this change, meshes in the render world might not be
attached to entities anymore. Therefore, the `entity` parameter to
`RenderCommand::render()` is now wrapped in an `Option`. Most
applications that use the render app's ECS can simply unwrap the
`Option`.
Note that for now sprites, gizmos, and UI elements still use the render
world as usual.
## Migration guide
* For efficiency reasons, some meshes in the render world may not have
corresponding `Entity` IDs anymore. As a result, the `entity` parameter
to `RenderCommand::render()` is now wrapped in an `Option`. Custom
rendering code may need to be updated to handle the case in which no
`Entity` exists for an object that is to be rendered.
# Objective
`bevy_utils` only requires aHash 0.8.3, which is broken on Rust 1.7.6:
```
error: could not compile `ahash` (lib) due to 1 previous error
error[E0635]: unknown feature `stdsimd`
```
See https://github.com/tkaitchuck/aHash/issues/200
This is fixed in aHash 0.8.7, so require at least that version
(Cargo.lock is already up to date).
# Objective
The deprecation message of `bevy::render::mesh::shape::Quad` says that
you should use `bevy_math`'s `Quad` instead. But it doesn't exist.
## Solution
Mention the correct primitive: `Rectangle`
> Follow up to #11600 and #10588
@mockersf expressed some [valid
concerns](https://github.com/bevyengine/bevy/pull/11600#issuecomment-1932796498)
about the current system this PR attempts to fix:
The `ComputedTextureSlices` reacts to asset change in both `bevy_sprite`
and `bevy_ui`, meaning that if the `ImageScaleMode` is inserted by
default in the bundles, we will iterate through most 2d items every time
an asset is updated.
# Solution
- `ImageScaleMode` only has two variants: `Sliced` and `Tiled`. I
removed the `Stretched` default
- `ImageScaleMode` is no longer part of any bundle, but the relevant
bundles explain that this additional component can be inserted
This way, the *absence* of `ImageScaleMode` means the image will be
stretched, and its *presence* will include the entity to the various
slicing systems
Optional components in bundles would make this more straigthfoward
# Additional work
Should I add new bundles with the `ImageScaleMode` component ?
# Objective
- Encoding many GPU commands (such as in a renderpass with many draws,
such as the main opaque pass) onto a `wgpu::CommandEncoder` is very
expensive, and takes a long time.
- To improve performance, we want to perform the command encoding for
these heavy passes in parallel.
## Solution
- `RenderContext` can now queue up "command buffer generation tasks"
which are closures that will generate a command buffer when called.
- When finalizing the render context to produce the final list of
command buffers, these tasks are run in parallel on the
`ComputeTaskPool` to produce their corresponding command buffers.
- The general idea is that the node graph will run in serial, but in a
node, instead of doing rendering work, you can add tasks to do render
work in parallel with other node's tasks that get ran at the end of the
graph execution.
## Nodes Parallelized
- `MainOpaquePass3dNode`
- `PrepassNode`
- `DeferredGBufferPrepassNode`
- `ShadowPassNode` (One task per view)
## Future Work
- For large number of draws calls, might be worth further subdividing
passes into 2+ tasks.
- Extend this to UI, 2d, transparent, and transmissive nodes?
- Needs testing - small command buffers are inefficient - it may be
worth reverting to the serial command encoder usage for render phases
with few items.
- All "serial" (traditional) rendering work must finish before parallel
rendering tasks (the new stuff) can start to run.
- There is still only one submission to the graphics queue at the end of
the graph execution. There is still no ability to submit work earlier.
## Performance Improvement
Thanks to @Elabajaba for testing on Bistro.
TLDR: Without shadow mapping, this PR has no impact. _With_ shadow
mapping, this PR gives **~40 more fps** than main.
---
## Changelog
- `MainOpaquePass3dNode`, `PrepassNode`, `DeferredGBufferPrepassNode`,
and each shadow map within `ShadowPassNode` are now encoded in parallel,
giving _greatly_ increased CPU performance, mainly when shadow mapping
is enabled.
- Does not work on WASM or AMD+Windows+Vulkan.
- Added `RenderContext::add_command_buffer_generation_task()`.
- `RenderContext::new()` now takes adapter info
- Some render graph and Node related types and methods now have
additional lifetime constraints.
## Migration Guide
`RenderContext::new()` now takes adapter info
- Some render graph and Node related types and methods now have
additional lifetime constraints.
---------
Co-authored-by: Elabajaba <Elabajaba@users.noreply.github.com>
Co-authored-by: François <mockersf@gmail.com>
# Objective
While profiling around to validate the results of #9172, I noticed that
`present_frames` can take a significant amount of time. Digging into the
cause, it seems like we're creating a new `QueryState` from scratch
every frame. This involves scanning the entire World's metadata instead
of just updating its view of the world.
## Solution
Use a `SystemState` argument to cache the `QueryState` to avoid this
construction cost.
## Performance
Against `many_foxes`, this seems to cut the time spent in
`present_frames` by nearly almost 2x. Yellow is this PR, red is main.
# Objective
#11431 and #11688 implemented meshing support for Bevy's new geometric
primitives. The next step is to deprecate the shapes in
`bevy_render::mesh::shape` and to later remove them completely for 0.14.
## Solution
Deprecate the shapes and reduce code duplication by utilizing the
primitive meshing API for the old shapes where possible.
Note that some shapes have behavior that can't be exactly reproduced
with the new primitives yet:
- `Box` is more of an AABB with min/max extents
- `Plane` supports a subdivision count
- `Quad` has a `flipped` property
These types have not been changed to utilize the new primitives yet.
---
## Changelog
- Deprecated all shapes in `bevy_render::mesh::shape`
- Changed all examples to use new primitives for meshing
## Migration Guide
Bevy has previously used rendering-specific types like `UVSphere` and
`Quad` for primitive mesh shapes. These have now been deprecated to use
the geometric primitives newly introduced in version 0.13.
Some examples:
```rust
let before = meshes.add(shape::Box::new(5.0, 0.15, 5.0));
let after = meshes.add(Cuboid::new(5.0, 0.15, 5.0));
let before = meshes.add(shape::Quad::default());
let after = meshes.add(Rectangle::default());
let before = meshes.add(shape::Plane::from_size(5.0));
// The surface normal can now also be specified when using `new`
let after = meshes.add(Plane3d::default().mesh().size(5.0, 5.0));
let before = meshes.add(
Mesh::try_from(shape::Icosphere {
radius: 0.5,
subdivisions: 5,
})
.unwrap(),
);
let after = meshes.add(Sphere::new(0.5).mesh().ico(5).unwrap());
```
# Objective
- Try not to drop the render world on the render thread, and drop the
main world after the render world.
- The render world has a drop check that will panic if it is dropped off
the main thread.
## Solution
- Keep track of where the render world is and wait for it to come back
when the channel resource is dropped.
---
## Changelog
- Wait for the render world when the main world is dropped.
## Migration Guide
- If you were using the pipelined rendering channels,
`MainToRenderAppSender` and `RenderToMainAppReceiver`, they have been
combined into the single resource `RenderAppChannels`.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Friz64 <friz64@protonmail.com>
> Follow up to #10588
> Closes#11749 (Supersedes #11756)
Enable Texture slicing for the following UI nodes:
- `ImageBundle`
- `ButtonBundle`
<img width="739" alt="Screenshot 2024-01-29 at 13 57 43"
src="https://github.com/bevyengine/bevy/assets/26703856/37675681-74eb-4689-ab42-024310cf3134">
I also added a collection of `fantazy-ui-borders` from
[Kenney's](www.kenney.nl) assets, with the appropriate license (CC).
If it's a problem I can use the same textures as the `sprite_slice`
example
# Work done
Added the `ImageScaleMode` component to the targetted bundles, most of
the logic is directly reused from `bevy_sprite`.
The only additional internal component is the UI specific
`ComputedSlices`, which does the same thing as its spritee equivalent
but adapted to UI code.
Again the slicing is not compatible with `TextureAtlas`, it's something
I need to tackle more deeply in the future
# Fixes
* [x] I noticed that `TextureSlicer::compute_slices` could infinitely
loop if the border was larger that the image half extents, now an error
is triggered and the texture will fallback to being stretched
* [x] I noticed that when using small textures with very small *tiling*
options we could generate hundred of thousands of slices. Now I set a
minimum size of 1 pixel per slice, which is already ridiculously small,
and a warning will be sent at runtime when slice count goes above 1000
* [x] Sprite slicing with `flip_x` or `flip_y` would give incorrect
results, correct flipping is now supported to both sprites and ui image
nodes thanks to @odecay observation
# GPU Alternative
I create a separate branch attempting to implementing 9 slicing and
tiling directly through the `ui.wgsl` fragment shader. It works but
requires sending more data to the GPU:
- slice border
- tiling factors
And more importantly, the actual quad *scale* which is hard to put in
the shader with the current code, so that would be for a later iteration
[`ScheduleLabel`] derive macro uses "ScheduleName" as the trait name by
mistake. This only affects the error message when a user tries to use
the derive macro on a union type. No other code is affected.
# Objective
- This aims to fix#11755
- After #10812 some pipeline compilation can take more time than before
and all call to `get_render_pipeline` should check the result.
## Solution
- Check `get_render_pipeline` call result for msaa_writeback
- I checked that no other call to `get_render_pipeline` in bevy code
base is missng the checking on the result.
Don't try to create a uniform buffer for light probes if there are no
views.
Fixes the panic on examples that have no views, such as
`touch_input_events`.
# Objective
Fix https://github.com/bevyengine/bevy/issues/11657
## Solution
Add a `ReflectKind` enum, add `Reflect::reflect_kind` which returns a
`ReflectKind`, and add `kind` method implementions to `ReflectRef`,
`ReflectMut`, and `ReflectOwned`, which returns a `ReflectKind`.
I also changed `AccessError` to use this new struct instead of it's own
`TypeKind` struct.
---
## Changelog
- Added `ReflectKind`, an enumeration over the kinds of a reflected type
without its data.
- Added `Reflect::reflect_kind` (with default implementation)
- Added implementation for the `kind` method on `ReflectRef`,
`ReflectMut`, and `ReflectOwned` which gives their kind without any
information, as a `ReflectKind`
# Objective
- Fixes#11740
## Solution
- Turned `Mesh::set_indices` into `Mesh::insert_indices` and added
related methods for completeness.
---
## Changelog
- Replaced `Mesh::set_indices(indices: Option<Indices>)` with
`Mesh::insert_indices(indices: Indices)`
- Replaced `Mesh::with_indices(indices: Option<Indices>)` with
`Mesh::with_inserted_indices(indices: Indices)` and
`Mesh::with_removed_indices()` mirroring the API for inserting /
removing attributes.
- Updated the examples and internal uses of the APIs described above.
## Migration Guide
- Use `Mesh::insert_indices` or `Mesh::with_inserted_indices` instead of
`Mesh::set_indices` / `Mesh::with_indices`.
- If you have passed `None` to `Mesh::set_indices` or
`Mesh::with_indices` you should use `Mesh::remove_indices` or
`Mesh::with_removed_indices` instead.
---------
Co-authored-by: François <mockersf@gmail.com>
# Objective
- System `create_surfaces` needs to happen before `prepare_windows` or
we lose one frame at startup
## Solution
- Specify the ordering, remove the set as it doesn't mean anything there
# Objective
Bevy could benefit from *irradiance volumes*, also known as *voxel
global illumination* or simply as light probes (though this term is not
preferred, as multiple techniques can be called light probes).
Irradiance volumes are a form of baked global illumination; they work by
sampling the light at the centers of each voxel within a cuboid. At
runtime, the voxels surrounding the fragment center are sampled and
interpolated to produce indirect diffuse illumination.
## Solution
This is divided into two sections. The first is copied and pasted from
the irradiance volume module documentation and describes the technique.
The second part consists of notes on the implementation.
### Overview
An *irradiance volume* is a cuboid voxel region consisting of
regularly-spaced precomputed samples of diffuse indirect light. They're
ideal if you have a dynamic object such as a character that can move
about
static non-moving geometry such as a level in a game, and you want that
dynamic object to be affected by the light bouncing off that static
geometry.
To use irradiance volumes, you need to precompute, or *bake*, the
indirect
light in your scene. Bevy doesn't currently come with a way to do this.
Fortunately, [Blender] provides a [baking tool] as part of the Eevee
renderer, and its irradiance volumes are compatible with those used by
Bevy.
The [`bevy-baked-gi`] project provides a tool, `export-blender-gi`, that
can
extract the baked irradiance volumes from the Blender `.blend` file and
package them up into a `.ktx2` texture for use by the engine. See the
documentation in the `bevy-baked-gi` project for more details as to this
workflow.
Like all light probes in Bevy, irradiance volumes are 1×1×1 cubes that
can
be arbitrarily scaled, rotated, and positioned in a scene with the
[`bevy_transform::components::Transform`] component. The 3D voxel grid
will
be stretched to fill the interior of the cube, and the illumination from
the
irradiance volume will apply to all fragments within that bounding
region.
Bevy's irradiance volumes are based on Valve's [*ambient cubes*] as used
in
*Half-Life 2* ([Mitchell 2006], slide 27). These encode a single color
of
light from the six 3D cardinal directions and blend the sides together
according to the surface normal.
The primary reason for choosing ambient cubes is to match Blender, so
that
its Eevee renderer can be used for baking. However, they also have some
advantages over the common second-order spherical harmonics approach:
ambient cubes don't suffer from ringing artifacts, they are smaller (6
colors for ambient cubes as opposed to 9 for spherical harmonics), and
evaluation is faster. A smaller basis allows for a denser grid of voxels
with the same storage requirements.
If you wish to use a tool other than `export-blender-gi` to produce the
irradiance volumes, you'll need to pack the irradiance volumes in the
following format. The irradiance volume of resolution *(Rx, Ry, Rz)* is
expected to be a 3D texture of dimensions *(Rx, 2Ry, 3Rz)*. The
unnormalized
texture coordinate *(s, t, p)* of the voxel at coordinate *(x, y, z)*
with
side *S* ∈ *{-X, +X, -Y, +Y, -Z, +Z}* is as follows:
```text
s = x
t = y + ⎰ 0 if S ∈ {-X, -Y, -Z}
⎱ Ry if S ∈ {+X, +Y, +Z}
⎧ 0 if S ∈ {-X, +X}
p = z + ⎨ Rz if S ∈ {-Y, +Y}
⎩ 2Rz if S ∈ {-Z, +Z}
```
Visually, in a left-handed coordinate system with Y up, viewed from the
right, the 3D texture looks like a stacked series of voxel grids, one
for
each cube side, in this order:
| **+X** | **+Y** | **+Z** |
| ------ | ------ | ------ |
| **-X** | **-Y** | **-Z** |
A terminology note: Other engines may refer to irradiance volumes as
*voxel
global illumination*, *VXGI*, or simply as *light probes*. Sometimes
*light
probe* refers to what Bevy calls a reflection probe. In Bevy, *light
probe*
is a generic term that encompasses all cuboid bounding regions that
capture
indirect illumination, whether based on voxels or not.
Note that, if binding arrays aren't supported (e.g. on WebGPU or WebGL
2),
then only the closest irradiance volume to the view will be taken into
account during rendering.
[*ambient cubes*]:
https://advances.realtimerendering.com/s2006/Mitchell-ShadingInValvesSourceEngine.pdf
[Mitchell 2006]:
https://advances.realtimerendering.com/s2006/Mitchell-ShadingInValvesSourceEngine.pdf
[Blender]: http://blender.org/
[baking tool]:
https://docs.blender.org/manual/en/latest/render/eevee/render_settings/indirect_lighting.html
[`bevy-baked-gi`]: https://github.com/pcwalton/bevy-baked-gi
### Implementation notes
This patch generalizes light probes so as to reuse as much code as
possible between irradiance volumes and the existing reflection probes.
This approach was chosen because both techniques share numerous
similarities:
1. Both irradiance volumes and reflection probes are cuboid bounding
regions.
2. Both are responsible for providing baked indirect light.
3. Both techniques involve presenting a variable number of textures to
the shader from which indirect light is sampled. (In the current
implementation, this uses binding arrays.)
4. Both irradiance volumes and reflection probes require gathering and
sorting probes by distance on CPU.
5. Both techniques require the GPU to search through a list of bounding
regions.
6. Both will eventually want to have falloff so that we can smoothly
blend as objects enter and exit the probes' influence ranges. (This is
not implemented yet to keep this patch relatively small and reviewable.)
To do this, we generalize most of the methods in the reflection probes
patch #11366 to be generic over a trait, `LightProbeComponent`. This
trait is implemented by both `EnvironmentMapLight` (for reflection
probes) and `IrradianceVolume` (for irradiance volumes). Using a trait
will allow us to add more types of light probes in the future. In
particular, I highly suspect we will want real-time reflection planes
for mirrors in the future, which can be easily slotted into this
framework.
## Changelog
> This section is optional. If this was a trivial fix, or has no
externally-visible impact, you can delete this section.
### Added
* A new `IrradianceVolume` asset type is available for baked voxelized
light probes. You can bake the global illumination using Blender or
another tool of your choice and use it in Bevy to apply indirect
illumination to dynamic objects.
# Objective
Split up from #11007, fixing most of the remaining work for #10569.
Implement `Meshable` for `Cuboid`, `Sphere`, `Cylinder`, `Capsule`,
`Torus`, and `Plane3d`. This covers all shapes that Bevy has mesh
structs for in `bevy_render::mesh::shapes`.
`Cone` and `ConicalFrustum` are new shapes, so I can add them in a
follow-up, or I could just add them here directly if that's preferrable.
## Solution
Implement `Meshable` for `Cuboid`, `Sphere`, `Cylinder`, `Capsule`,
`Torus`, and `Plane3d`.
The logic is mostly just a copy of the the existing `bevy_render`
shapes, but `Plane3d` has a configurable surface normal that affects the
orientation. Some property names have also been changed to be more
consistent.
The default values differ from the old shapes to make them a bit more
logical:
- Spheres now have a radius of 0.5 instead of 1.0. The default capsule
is equivalent to the default cylinder with the sphere's halves glued on.
- The inner and outer radius of the torus are now 0.5 and 1.0 instead of
0.5 and 1.5 (i.e. the new minor and major radii are 0.25 and 0.75). It's
double the width of the default cuboid, half of its height, and the
default sphere matches the size of the hole.
- `Cuboid` is 1x1x1 by default unlike the dreaded `Box` which is 2x1x1.
Before, with "old" shapes:
Now, with primitive meshing:
I only changed the `3d_shapes` example to use primitives for now. I can
change them all in this PR or a follow-up though, whichever way is
preferrable.
### Sphere API
Spheres have had separate `Icosphere` and `UVSphere` structs, but with
primitives we only have one `Sphere`.
We need to handle this with builders:
```rust
// Existing structs
let ico = Mesh::try_from(Icophere::default()).unwrap();
let uv = Mesh::from(UVSphere::default());
// Primitives
let ico = Sphere::default().mesh().ico(5).unwrap();
let uv = Sphere::default().mesh().uv(32, 18);
```
We could add methods on `Sphere` directly to skip calling `.mesh()`.
I also added a `SphereKind` enum that can be used with the `kind`
method:
```rust
let ico = Sphere::default()
.mesh()
.kind(SphereKind::Ico { subdivisions: 8 })
.build();
```
The default mesh for a `Sphere` is an icosphere with 5 subdivisions
(like the default `Icosphere`).
---
## Changelog
- Implement `Meshable` and `Default` for `Cuboid`, `Sphere`, `Cylinder`,
`Capsule`, `Torus`, and `Plane3d`
- Use primitives in `3d_shapes` example
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- The exported hashtypes are just re-exports from hashbrown, we want to
drop that dependency and (in the future) let the user import their own
choice.
- Fixes#11717
## Solution
- Adding a deprecated tag on the re-exports, so in future releases these
can be safely removed.
# Objective
During my exploratory work on the remote editor, I found a couple of
types that were either not registered, or that were missing
`ReflectDefault`.
## Solution
- Added registration and `ReflectDefault` where applicable
- (Drive by fix) Moved `Option<f32>` registration to `bevy_core` instead
of `bevy_ui`, along with similar types.
---
## Changelog
- Fixed: Registered `FogSettings`, `FogFalloff`,
`ParallaxMappingMethod`, `OpaqueRendererMethod` structs for reflection
- Fixed: Registered `ReflectDefault` trait for `ColorGrading` and
`CascadeShadowConfig` structs
# Objective
Includes the UI node size as a parameter to the UiMaterial shader,
useful for SDF-based rendering, aspect ratio correction and other use
cases.
Fixes#11392
## Solution
Added the node size to the UiMaterial vertex shader params and also to
the data that is passed to the fragment shader.
## Migration Guide
This change should be backwards compatible, using the new field is
optional.
Note to reviewers: render pipelines are a bit outside my comfort zone,
so please make sure I haven't made any mistakes.
---------
Co-authored-by: Rob Parrett <robparrett@gmail.com>
# Objective
- Fixes#11679
## Solution
- Added `IntoSystem::system_type_id` which returns the equivalent of
`system.into_system().type_id()` without construction. This allows for
getting the `TypeId` of functions (a function is an unnamed type and
therefore you cannot call `TypeId::of::<apply_deferred::System>()`)
- Added default implementation of `System::type_id` to ensure
consistency between implementations. Some returned `Self`, while others
were returning an inner value instead. This ensures consistency with
`IntoSystem::system_type_id`.
## Migration Guide
If you use `System::type_id()` on function systems (exclusive or not),
ensure you are comparing its value to other `System::type_id()` calls,
or `IntoSystem::system_type_id()`.
This code wont require any changes, because `IntoSystem`'s are directly
compared to each other.
```rust
fn test_system() {}
let type_id = test_system.type_id();
// ...
// No change required
assert_eq!(test_system.type_id(), type_id);
```
Likewise, this code wont, because `System`'s are directly compared.
```rust
fn test_system() {}
let type_id = IntoSystem::into_system(test_system).type_id();
// ...
// No change required
assert_eq!(IntoSystem::into_system(test_system).type_id(), type_id);
```
The below _does_ require a change, since you're comparing a `System`
type to a `IntoSystem` type.
```rust
fn test_system() {}
// Before
assert_eq!(test_system.type_id(), IntoSystem::into_system(test_system).type_id());
// After
assert_eq!(test_system.system_type_id(), IntoSystem::into_system(test_system).type_id());
```
# Objective
- There are too many `NonSendMarker`
https://docs.rs/bevy/0.12.1/bevy/index.html?search=nonsendmarker
- There should be only one
## Solution
- Use the marker type from bevy_core in bevy_render
---
## Migration Guide
- If you were using `bevy::render::view::NonSendMarker` or
`bevy::render::view:🪟:NonSendMarker`, use
`bevy::core::NonSendMarker` instead
# Objective
Bevy does ridiculous amount of drawcalls, and our batching isn't very
effective because we sort by distance and only batch if we get multiple
of the same object in a row. This can give us slightly better GPU
performance when not using the depth prepass (due to less overdraw), but
ends up being massively CPU bottlenecked due to doing thousands of
unnecessary drawcalls.
## Solution
Change the sort functions to sort by pipeline key then by mesh id for
large performance gains in more realistic scenes than our stress tests.
Pipelines changed:
- Opaque3d
- Opaque3dDeferred
- Opaque3dPrepass
---
## Changelog
- Opaque3d drawing order is now sorted by pipeline and mesh, rather than
by distance. This trades off a bit of GPU time in exchange for massively
better batching in scenes that aren't only drawing huge amounts of a
single object.
# Objective
- Change set of systems as I made a mistake in #11672
- Don't block main when not needed
- Fixes#11235
## Solution
- add a run condition so that the system won't run and block main if not
needed
# Objective
- Some places manually use a `bool` /`AtomicBool` to warn once.
## Solution
- Use the `warn_once` macro which internally creates an `AtomicBool`.
Downside: in some case the warning state would have been reset after
recreating the struct carrying the warn state, whereas now it will
always warn only once per program run (For example, if all
`MeshPipeline`s are dropped or the `World` is recreated for
`Local<bool>`/ a `bool` resource, which shouldn't happen over the course
of a standard `App` run).
---
## Changelog
### Removed
- `FontAtlasWarning` has been removed, but the corresponding warning is
still emitted.
# Objective
We currently over/underpromise hash stability:
- `HashMap`/`HashSet` use `BuildHasherDefault<AHasher>` instead of
`RandomState`. As a result, the hash is stable within the same run.
- [aHash isn't stable between devices (and
versions)](https://github.com/tkaitchuck/ahash?tab=readme-ov-file#goals-and-non-goals),
yet it's used for `StableHashMap`/`StableHashSet`
- the specialized hashmaps are stable
Interestingly, `StableHashMap`/`StableHashSet` aren't used by Bevy
itself (anymore).
## Solution
Add/fix documentation
## Alternatives
For `StableHashMap`/`StableHashSet`:
- remove them
- revive #7107
---
## Changelog
- added iteration stability guarantees for different hashmaps
This is just a minor fix extracted from #11697
A logic error. We tried to close the polygon shape, if the user
specifies an
unclosed polygon. The closing linestring previously didn't close the
polygon
though, but instead added a zero length line at the last coordinate.
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
I wanted to pass in a `String` to `DynamicStruct::insert_boxed` but it
took in a &str. That's fine but I also saw that it immediately converted
the `&str` to a `String`. Which is wasteful.
## Solution
I made `DynamicStruct::insert_boxed` take in a `impl Into<Cow<str>>`.
Same for `DynamicStruct::insert`.
---
## Changelog
- `DynamicStruct::insert_boxed` and `DynamicStruct::insert` now support
taking in anything that implements `impl Into<Cow<str>>`.
# Objective
Send `SceneInstanceReady` only once per scene.
## Solution
I assume that this was not intentional.
So I just changed it to only be sent once per scene.
---
## Changelog
### Fixed
- Fixed `SceneInstanceReady` being emitted for every `Entity` in a
scene.
# Objective
- Pipeline compilation is slow and blocks the frame
- Closes https://github.com/bevyengine/bevy/issues/8224
## Solution
- Compile pipelines in a Task on the AsyncComputeTaskPool
---
## Changelog
- Render/compute pipeline compilation is now done asynchronously over
multiple frames when the multi-threaded feature is enabled and on
non-wasm and non-macOS platforms
- Added `CachedPipelineState::Creating`
- Added `PipelineCache::block_on_render_pipeline()`
- Added `bevy_utils::futures::check_ready`
- Added `bevy_render/multi-threaded` cargo feature
## Migration Guide
- Match on the new `Creating` variant for exhaustive matches of
`CachedPipelineState`
# Objective
- Fixes #4188, make users could set application ID for bevy apps.
## Solution
- Add `name` field to `bevy:🪟:Window`. Specifying this field adds
different properties to the window: application ID on `Wayland`,
`WM_CLASS` on `X11`, or window class name on Windows. It has no effect
on other platforms.
---
## Changelog
### Added
- Add `name` to `bevy:🪟:Window`.
## Migration Guide
- Set the `bevy_window::Window`'s `name` field when needed:
```rust
App::new()
.add_plugins(DefaultPlugins.set(WindowPlugin {
primary_window: Some(Window {
title: "I am a window!".into(),
name: Some("SpaceGameCompany.SpaceShooter".into()),
..default()
}),
..default()
}))
.run();
```
---------
Co-authored-by: François <mockersf@gmail.com>
# Objective
Fixes#11653
## Solution
- Just added the formats to the docstring, I played around with having
the format appear in the type somehow so that it didn't need to be
written manually in the docstring but it ended up being more trouble
than it was worth.
Co-authored-by: James Liu <contact@jamessliu.com>
Frustum computation is nontrivial amount of code private in
`update_frusta` system.
Make it public.
This is needed to decide which entities to spawn/despawn in `Update`
based on camera changes. But if `Update` also changed camera, frustum is
not yet recomputed.
Technically it is probably possible to run an iteration of
`update_frusta` system by a user in `Update` schedule after propagating
`GlobalTransform` to the cameras, but it is easier to just compute
frustum manually using API added in this PR.
Also replace two places where this code is used.
---------
Co-authored-by: vero <email@atlasdostal.com>
# Objective
- (Partially) Fixes#9904
- Acts on #9910
## Solution
- Deprecated the relevant methods from `Query`, cascading changes as
required across Bevy.
---
## Changelog
- Deprecated `QueryState::get_component_unchecked_mut` method
- Deprecated `Query::get_component` method
- Deprecated `Query::get_component_mut` method
- Deprecated `Query::component` method
- Deprecated `Query::component_mut` method
- Deprecated `Query::get_component_unchecked_mut` method
## Migration Guide
### `QueryState::get_component_unchecked_mut`
Use `QueryState::get_unchecked_manual` and select for the exact
component based on the structure of the exact query as required.
### `Query::(get_)component(_unchecked)(_mut)`
Use `Query::get` and select for the exact component based on the
structure of the exact query as required.
- For mutable access (`_mut`), use `Query::get_mut`
- For unchecked access (`_unchecked`), use `Query::get_unchecked`
- For panic variants (non-`get_`), add `.unwrap()`
## Notes
- `QueryComponentError` can be removed once these deprecated methods are
also removed. Due to an interaction with `thiserror`'s derive macro, it
is not marked as deprecated.
Use `TypeIdMap<T>` instead of `HashMap<TypeId, T>`
- ~~`TypeIdMap` was in `bevy_ecs`. I've kept it there because of
#11478~~
- ~~I haven't swapped `bevy_reflect` over because it doesn't depend on
`bevy_ecs`, but I'd also be happy with moving `TypeIdMap` to
`bevy_utils` and then adding a dependency to that~~
- ~~this is a slight change in the public API of
`DrawFunctionsInternal`, does this need to go in the changelog?~~
## Changelog
- moved `TypeIdMap` to `bevy_utils`
- changed `DrawFunctionsInternal::indices` to `TypeIdMap`
## Migration Guide
- `TypeIdMap` now lives in `bevy_utils`
- `DrawFunctionsInternal::indices` now uses a `TypeIdMap`.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Update `tracing-tracy`.
- Closes#11598.
## Solution
- Bump `tracing-tracy` to 0.11.0 and `tracy-client` alongside it to
0.17.0 to avoid duplicating that dependency in the deps tree.
- `TracyLayer` is now configurable on creation, so use the default
config.
---------
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Objective
Currently the `missing_docs` lint is allowed-by-default and enabled at
crate level when their documentations is complete (see #3492).
This PR proposes to inverse this logic by making `missing_docs`
warn-by-default and mark crates with imcomplete docs allowed.
## Solution
Makes `missing_docs` warn at workspace level and allowed at crate level
when the docs is imcomplete.
# Objective
- Allow prepare windows to run off of the main thread on all platforms.
- Fixes https://github.com/bevyengine/bevy/issues/9964 on all platforms.
## Solution
- Running `prepare_windows` on the main thread on apple platforms is
only mandatory to create surface, which is only needed during window
creation. Split that part into its own system that happens before
`prepare_windows`
- Tested on macOS and iOS
---
## Changelog
- Allow prepare windows to run off main thread on all platforms.
# Objective
Add interactive system debugging capabilities to bevy, providing
step/break/continue style capabilities to running system schedules.
* Original implementation: #8063
- `ignore_stepping()` everywhere was too much complexity
* Schedule-config & Resource discussion: #8168
- Decided on selective adding of Schedules & Resource-based control
## Solution
Created `Stepping` Resource. This resource can be used to enable
stepping on a per-schedule basis. Systems within schedules can be
individually configured to:
* AlwaysRun: Ignore any stepping state and run every frame
* NeverRun: Never run while stepping is enabled
- this allows for disabling of systems while debugging
* Break: If we're running the full frame, stop before this system is run
Stepping provides two modes of execution that reflect traditional
debuggers:
* Step-based: Only execute one system at a time
* Continue/Break: Run all systems, but stop before running a system
marked as Break
### Demo
https://user-images.githubusercontent.com/857742/233630981-99f3bbda-9ca6-4cc4-a00f-171c4946dc47.mov
Breakout has been modified to use Stepping. The game runs normally for a
couple of seconds, then stepping is enabled and the game appears to
pause. A list of Schedules & Systems appears with a cursor at the first
System in the list. The demo then steps forward full frames using the
spacebar until the ball is about to hit a brick. Then we step system by
system as the ball impacts a brick, showing the cursor moving through
the individual systems. Finally the demo switches back to frame stepping
as the ball changes course.
### Limitations
Due to architectural constraints in bevy, there are some cases systems
stepping will not function as a user would expect.
#### Event-driven systems
Stepping does not support systems that are driven by `Event`s as events
are flushed after 1-2 frames. Although game systems are not running
while stepping, ignored systems are still running every frame, so events
will be flushed.
This presents to the user as stepping the event-driven system never
executes the system. It does execute, but the events have already been
flushed.
This can be resolved by changing event handling to use a buffer for
events, and only dropping an event once all readers have read it.
The work-around to allow these systems to properly execute during
stepping is to have them ignore stepping:
`app.add_systems(event_driven_system.ignore_stepping())`. This was done
in the breakout example to ensure sound played even while stepping.
#### Conditional Systems
When a system is stepped, it is given an opportunity to run. If the
conditions of the system say it should not run, it will not.
Similar to Event-driven systems, if a system is conditional, and that
condition is only true for a very small time window, then stepping the
system may not execute the system. This includes depending on any sort
of external clock.
This exhibits to the user as the system not always running when it is
stepped.
A solution to this limitation is to ensure any conditions are consistent
while stepping is enabled. For example, all systems that modify any
state the condition uses should also enable stepping.
#### State-transition Systems
Stepping is configured on the per-`Schedule` level, requiring the user
to have a `ScheduleLabel`.
To support state-transition systems, bevy generates needed schedules
dynamically. Currently it’s very difficult (if not impossible, I haven’t
verified) for the user to get the labels for these schedules.
Without ready access to the dynamically generated schedules, and a
resolution for the `Event` lifetime, **stepping of the state-transition
systems is not supported**
---
## Changelog
- `Schedule::run()` updated to consult `Stepping` Resource to determine
which Systems to run each frame
- Added `Schedule.label` as a `BoxedSystemLabel`, along with supporting
`Schedule::set_label()` and `Schedule::label()` methods
- `Stepping` needed to know which `Schedule` was running, and prior to
this PR, `Schedule` didn't track its own label
- Would have preferred to add `Schedule::with_label()` and remove
`Schedule::new()`, but this PR touches enough already
- Added calls to `Schedule.set_label()` to `App` and `World` as needed
- Added `Stepping` resource
- Added `Stepping::begin_frame()` system to `MainSchedulePlugin`
- Run before `Main::run_main()`
- Notifies any `Stepping` Resource a new render frame is starting
## Migration Guide
- Add a call to `Schedule::set_label()` for any custom `Schedule`
- This is only required if the `Schedule` will be stepped
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
- In #9822 I forgot to disable auto sync points on the Extract Schedule.
We want to do this because the Commands on the Extract Schedule should
be applied on the render thread.
# Objective
- Allow prepare windows to run off of the main thread on platforms that
allow it.
- Fixes https://github.com/bevyengine/bevy/issues/9964 on most
platforms.
## Solution
- Conditionally compile prepare windows for different OS's
- Seems like it's only the call to `create_surface` that needs to run on
the main thread here.
- I've only tested this on windows, but I do see prepare windows running
on other threads.
---
## Changelog
- Allow prepare windows to run off main thread on platforms that allow
it.
# Objective
Allow animation of types other than translation, scale, and rotation on
`Transforms`.
## Solution
Add a base trait for all values that can be animated by the animation
system. This provides the basic operations for sampling and blending
animation values for more than just translation, rotation, and scale.
This implements part of bevyengine/rfcs#51, but is missing the
implementations for `Range<T>` and `Color`. This also does not fully
integrate with the existing `AnimationPlayer` yet, just setting up the
trait.
---------
Co-authored-by: Kirillov Kirill <kirusfg@gmail.com>
Co-authored-by: François <mockersf@gmail.com>
Co-authored-by: irate <JustTheCoolDude@gmail.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Alice Cecile <alice.i.cecil@gmail.com>
# Objective
Fix an issue where events are not being dropped after being read. I
believe #10077 introduced this issue. The code currently works as
follows:
1. `EventUpdateSignal` is **shared for all event types**
2. During the fixed update phase, `EventUpdateSignal` is set to true
3. `event_update_system`, **unique per event type**, runs to update
Events<T>
4. `event_update_system` reads value of `EventUpdateSignal` to check if
it should update, and then **resets** the value to false
If there are multiple event types, the first `event_update_system` run
will reset the shared `EventUpdateSignal` signal, preventing other
events from being cleared.
## Solution
I've updated the code to have separate signals per event type and added
a shared signal to notify all systems that the time plugin is installed.
## Changelog
- Fixed bug where events were not being dropped
The PR is in a reviewable state now in the sense that the basic
implementations are there. There are still some ToDos that I'm aware of:
- [x] docs for all the new structs and traits
- [x] implement `Default` and derive other useful traits for the new
structs
- [x] Take a look at the notes again (Do this after a first round of
reviews)
- [x] Take care of the repetition in the circle drawing functions
---
# Objective
- TLDR: This PR enables us to quickly draw all the newly added
primitives from `bevy_math` in immediate mode with gizmos
- Addresses #10571
## Solution
- This implements the first design idea I had that covered everything
that was mentioned in the Issue
https://github.com/bevyengine/bevy/issues/10571#issuecomment-1863646197
---
## Caveats
- I added the `Primitive(2/3)d` impls for `Direction(2/3)d` to make them
work with the current solution. We could impose less strict requirements
for the gizmoable objects and remove the impls afterwards if the
community doesn't like the current approach.
---
## Changelog
- implement capabilities to draw ellipses on the gizmo in general (this
was required to have some code which is able to draw the ellipse
primitive)
- refactored circle drawing code to use the more general ellipse drawing
code to keep code duplication low
- implement `Primitive2d` for `Direction2d` and impl `Primitive3d` for
`Direction3d`
- implement trait to draw primitives with specialized details with
gizmos
- `GizmoPrimitive2d` for all the 2D primitives
- `GizmoPrimitive3d` for all the 3D primitives
- (question while writing this: Does it actually matter if we split this
in 2D and 3D? I guess it could be useful in the future if we do
something based on the main rendering mode even though atm it's kinda
useless)
---
---------
Co-authored-by: nothendev <borodinov.ilya@gmail.com>
# Objective
Glyph positions don't account for padding added to the font texture
atlas, resulting in them being off by one physical pixel in both axis.
## Example
```rust
use bevy::{
prelude::*, window::WindowResolution
};
fn main() {
App::new()
.add_plugins(DefaultPlugins.set(WindowPlugin {
primary_window: Some(Window {
resolution: WindowResolution::default().with_scale_factor_override(1.),
..Default::default()
}),
..Default::default()
}))
.add_systems(Startup, setup)
.run();
}
fn setup(mut commands: Commands, asset_server: Res<AssetServer>) {
commands.spawn(Camera2dBundle::default());
commands.spawn(
TextBundle::from_section(
"QQQQQ",
TextStyle {
font: asset_server.load("FiraMono-Medium.ttf"),
font_size: 14.0,
..default()
},
)
.with_style(Style {
left:Val::Px(10.),
top: Val::Px(10.),
..default()
})
.with_background_color(Color::RED)
);
}
```
<img width="350" alt="QQQQQ-bad"
src="https://github.com/bevyengine/bevy/assets/27962798/6a509aee-64c8-4ee8-a8c1-77ee65355898">
The coordinates are off by one in physical coordinates, not logical. So
the difference only becomes obvious with `UiScale` and the window scale
factor set to low values.
## Solution
Translate glyph positions by -1 in both axes.
<img width="300" alt="QQQQQ-good"
src="https://github.com/bevyengine/bevy/assets/27962798/16e3f6d9-1223-48e0-9fdd-b682a3e8ade4">
---
## Changelog
* Translate the positions for each glyph by -1 in both axes in
`bevy_text::glyph_brush::process_glyphs`
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Drawing a `Gizmos::circle` whose normal is derived from a Transform's
local axes now requires converting a Vec3 to a Direction3d and
unwrapping the result, and I think we shold move the conversion into
Bevy.
## Solution
We can make
`Transform::{left,right,up,down,forward,back,local_x,local_y,local_z}`
return a Direction3d, because they know that their results will be of
finite non-zero length (roughly 1.0).
---
## Changelog
`Transform::up()` and similar functions now return `Direction3d` instead
of `Vec3`.
## Migration Guide
Callers of `Transform::up()` and similar functions may have to
dereference the returned `Direction3d` to get to the inner `Vec3`.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Joona Aalto <jondolf.dev@gmail.com>
# Objective
- Address #10338
## Solution
- When implementing specular and diffuse transmission, I inadvertently
introduced a performance regression. On high-end hardware it is barely
noticeable, but **for lower-end hardware it can be pretty brutal**. If I
understand it correctly, this is likely due to use of masking by the GPU
to implement control flow, which means that you still pay the price for
the branches you don't take;
- To avoid that, this PR introduces new shader defs (controlled via
`StandardMaterialKey`) that conditionally include the transmission
logic, that way the shader code for both types of transmission isn't
even sent to the GPU if you're not using them;
- This PR also renames ~~`STANDARDMATERIAL_NORMAL_MAP`~~ to
`STANDARD_MATERIAL_NORMAL_MAP` for consistency with the naming
convention used elsewhere in the codebase. (Drive-by fix)
---
## Changelog
- Added new shader defs, set when using transmission in the
`StandardMaterial`:
- `STANDARD_MATERIAL_SPECULAR_TRANSMISSION`;
- `STANDARD_MATERIAL_DIFFUSE_TRANSMISSION`;
- `STANDARD_MATERIAL_SPECULAR_OR_DIFFUSE_TRANSMISSION`.
- Fixed performance regression caused by the introduction of
transmission, by gating transmission shader logic behind the newly
introduced shader defs;
- Renamed ~~`STANDARDMATERIAL_NORMAL_MAP`~~ to
`STANDARD_MATERIAL_NORMAL_MAP` for consistency;
## Migration Guide
- If you were using `#ifdef STANDARDMATERIAL_NORMAL_MAP` on your shader
code, make sure to update the name to `STANDARD_MATERIAL_NORMAL_MAP`;
(with an underscore between `STANDARD` and `MATERIAL`)
# Objective
- `RayTest` vs `AabbCast` and `CircleCast` is inconsistent
## Solution
- Renaming the other two would only make the name more confusing, so we
rename `RayTest2d/3d` to `RayCast2d/3d`
# Objective
- `AssetTransformer` provides an input asset, and output an asset, but
provides no access to the `LabeledAsset`'s created by the `AssetLoader`.
Labeled sub assets are an extremely important piece of many assets, Gltf
in particular, and without them the amount of transformation on an asset
is limited. In order for `AssetTransformer`'s to be useful, they need to
have access to these sub assets.
- LabeledAsset's loaded by `AssetLoader`s are provided to `AssetSaver`s
in the `LoadAndSave` process, but the `LoadTransformAndSave` process
drops these values in the transform stage, and so `AssetSaver` is given
none.
- Fixes#11606
Ideally the AssetTransformer should not ignore labeled sub assets, and
they should be kept at least for the AssetSaver
## Solution
- I created a new struct similar to `SavedAsset` named
`TransformedAsset` which holds the input asset, and the HashMap of
`LabeledAsset`s. The transform function now takes as input a
`TransformedAsset`, and returns a `TransformedAsset::<AssetOutput>`.
This gives the transform function access to the labeled sub assets
created by the `AssetLoader`.
- I also created `TransformedSubAsset` which holds mutable references to
a sub asset and that sub assets HashMap of `LabeledAsset`s. This allows
you to travers the Tree of `LabeledAsset`s by reference relatively
easily.
- The `LoadTransformAndSave` processor was then reworked to use the new
structs, stopping the `LabeledAsset`s from being dropped.
---
## Changelog
- Created TransformedAsset struct and TransformedSubAsset struct.
- Changed `get_untyped_handle` to return a `UntypedHandle` directly
rather than a reference and added `get_handle` as a typed variant in
SavedAsset and TransformedAsset
- Added `SavedAsset::from_transformed` as a constructor from a
`TransformedAsset`
- Switched LoadTransformAndSave process code to work with new
`TransformedAsset` type
- Added a `ProcessError` for `AssetTransformer` in process.rs
- Switched `AssetTransformer::transform` to use `TransformedAsset` as
input and output.
- Switched `AssetTransformer` to use a `BoxedFuture` like `AssetLoader`
and `AssetSaver` to allow for async transformation code.
- Updated AssetTransformer example to use new structure.
# Objective
It's often necessary to rotate directions, but it currently has to be
done like this:
```rust
Direction3d::new_unchecked(quat * *direction)
```
It'd be nice if you could rotate `Direction3d` directly:
```rust
quat * direction
```
## Solution
Implement `Mul<Direction3d>` for `Quat` ~~and the other way around.~~
(Glam doesn't impl `Mul<Quat>` or `MulAssign<Quat>` for `Vec3`)
The quaternion must be a unit quaternion to keep the direction
normalized, so there is a `debug_assert!` to be sure. Almost all `Quat`
constructors produce unit quaternions, so there should only be issues if
doing something like `quat + quat` instead of `quat * quat`, using
`Quat::from_xyzw` directly, or when you have significant enough drift
caused by e.g. physics simulation that doesn't normalize rotation. In
general, these would probably cause unexpected results anyway.
I also moved tests around slightly to make `dim2` and `dim3` more
consistent (`dim3` had *two* separate `test` modules for some reason).
In the future, we'll probably want a `Rotation2d` type that would
support the same for `Direction2d`. I considered implementing
`Mul<Mat2>` for `Direction2d`, but that would probably be more
questionable since `Mat2` isn't as clearly associated with rotations as
`Quat` is.
# Objective
I'm working on a developer console plugin, and I wanted to get a
field/index of a struct/list/tuple. My command parser already parses
member expressions and all that, so I wanted to construct a `ParsedPath`
manually, but it's all private.
## Solution
Make the internals of `ParsedPath` public and add documentation for
everything, and I changed the boxed slice inside `ParsedPath` to a
vector for more flexibility.
I also did a bunch of code cleanup. Improving documentation, error
messages, code, type names, etc.
---
## Changelog
- Added the ability to manually create `ParsedPath`s from their
elements, without the need of string parsing.
- Improved `ReflectPath` error handling.
## Migration Guide
- `bevy::reflect::AccessError` has been refactored.
That should be it I think, everything else that was changed was private
before this PR.
---------
Co-authored-by: Nicola Papale <nicopap@users.noreply.github.com>
# Objective
- Deriving `Reflect` for some public ChangeDetection/Tick structs in
bevy_ecs
---------
Co-authored-by: Charles Bournhonesque <cbournhonesque@snapchat.com>
# Objective
- Add a basic form of shapecasting for bounding volumes
## Solution
- Implement AabbCast2d, AabbCast3d, BoundingCircleCast, and
BoundingSphereCast
- These are really just raycasts, but they modify the volumes the ray is
casting against
- The tests are slightly simpler, since they just use the raycast code
for the heavy lifting
# Objective
- Addresses **Support processing and loading files without extensions**
from #9714
- Addresses **More runtime loading configuration** from #9714
- Fixes#367
- Fixes#10703
## Solution
`AssetServer::load::<A>` and `AssetServer::load_with_settings::<A>` can
now use the `Asset` type parameter `A` to select a registered
`AssetLoader` without inspecting the provided `AssetPath`. This change
cascades onto `LoadContext::load` and `LoadContext::load_with_settings`.
This allows the loading of assets which have incorrect or ambiguous file
extensions.
```rust
// Allow the type to be inferred by context
let handle = asset_server.load("data/asset_no_extension");
// Hint the type through the handle
let handle: Handle<CustomAsset> = asset_server.load("data/asset_no_extension");
// Explicit through turbofish
let handle = asset_server.load::<CustomAsset>("data/asset_no_extension");
```
Since a single `AssetPath` no longer maps 1:1 with an `Asset`, I've also
modified how assets are loaded to permit multiple asset types to be
loaded from a single path. This allows for two different `AssetLoaders`
(which return different types of assets) to both load a single path (if
requested).
```rust
// Uses GltfLoader
let model = asset_server.load::<Gltf>("cube.gltf");
// Hypothetical Blob loader for data transmission (for example)
let blob = asset_server.load::<Blob>("cube.gltf");
```
As these changes are reflected in the `LoadContext` as well as the
`AssetServer`, custom `AssetLoaders` can also take advantage of this
behaviour to create more complex assets.
---
## Change Log
- Updated `custom_asset` example to demonstrate extension-less assets.
- Added `AssetServer::get_handles_untyped` and Added
`AssetServer::get_path_ids`
## Notes
As a part of that refactor, I chose to store `AssetLoader`s (within
`AssetLoaders`) using a `HashMap<TypeId, ...>` instead of a `Vec<...>`.
My reasoning for this was I needed to add a relationship between `Asset`
`TypeId`s and the `AssetLoader`, so instead of having a `Vec` and a
`HashMap`, I combined the two, removing the `usize` index from the
adjacent maps.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
The whole `Cow<'static, str>` naming for nodes and subgraphs in
`RenderGraph` is a mess.
## Solution
Replaces hardcoded and potentially overlapping strings for nodes and
subgraphs inside `RenderGraph` with bevy's labelsystem.
---
## Changelog
* Two new labels: `RenderLabel` and `RenderSubGraph`.
* Replaced all uses for hardcoded strings with those labels
* Moved `Taa` label from its own mod to all the other `Labels3d`
* `add_render_graph_edges` now needs a tuple of labels
* Moved `ScreenSpaceAmbientOcclusion` label from its own mod with the
`ShadowPass` label to `LabelsPbr`
* Removed `NodeId`
* Renamed `Edges.id()` to `Edges.label()`
* Removed `NodeLabel`
* Changed examples according to the new label system
* Introduced new `RenderLabel`s: `Labels2d`, `Labels3d`, `LabelsPbr`,
`LabelsUi`
* Introduced new `RenderSubGraph`s: `SubGraph2d`, `SubGraph3d`,
`SubGraphUi`
* Removed `Reflect` and `Default` derive from `CameraRenderGraph`
component struct
* Improved some error messages
## Migration Guide
For Nodes and SubGraphs, instead of using hardcoded strings, you now
pass labels, which can be derived with structs and enums.
```rs
// old
#[derive(Default)]
struct MyRenderNode;
impl MyRenderNode {
pub const NAME: &'static str = "my_render_node"
}
render_app
.add_render_graph_node::<ViewNodeRunner<MyRenderNode>>(
core_3d::graph::NAME,
MyRenderNode::NAME,
)
.add_render_graph_edges(
core_3d::graph::NAME,
&[
core_3d::graph::node::TONEMAPPING,
MyRenderNode::NAME,
core_3d::graph::node::END_MAIN_PASS_POST_PROCESSING,
],
);
// new
use bevy::core_pipeline::core_3d::graph::{Labels3d, SubGraph3d};
#[derive(Debug, Hash, PartialEq, Eq, Clone, RenderLabel)]
pub struct MyRenderLabel;
#[derive(Default)]
struct MyRenderNode;
render_app
.add_render_graph_node::<ViewNodeRunner<MyRenderNode>>(
SubGraph3d,
MyRenderLabel,
)
.add_render_graph_edges(
SubGraph3d,
(
Labels3d::Tonemapping,
MyRenderLabel,
Labels3d::EndMainPassPostProcessing,
),
);
```
### SubGraphs
#### in `bevy_core_pipeline::core_2d::graph`
| old string-based path | new label |
|-----------------------|-----------|
| `NAME` | `SubGraph2d` |
#### in `bevy_core_pipeline::core_3d::graph`
| old string-based path | new label |
|-----------------------|-----------|
| `NAME` | `SubGraph3d` |
#### in `bevy_ui::render`
| old string-based path | new label |
|-----------------------|-----------|
| `draw_ui_graph::NAME` | `graph::SubGraphUi` |
### Nodes
#### in `bevy_core_pipeline::core_2d::graph`
| old string-based path | new label |
|-----------------------|-----------|
| `node::MSAA_WRITEBACK` | `Labels2d::MsaaWriteback` |
| `node::MAIN_PASS` | `Labels2d::MainPass` |
| `node::BLOOM` | `Labels2d::Bloom` |
| `node::TONEMAPPING` | `Labels2d::Tonemapping` |
| `node::FXAA` | `Labels2d::Fxaa` |
| `node::UPSCALING` | `Labels2d::Upscaling` |
| `node::CONTRAST_ADAPTIVE_SHARPENING` |
`Labels2d::ConstrastAdaptiveSharpening` |
| `node::END_MAIN_PASS_POST_PROCESSING` |
`Labels2d::EndMainPassPostProcessing` |
#### in `bevy_core_pipeline::core_3d::graph`
| old string-based path | new label |
|-----------------------|-----------|
| `node::MSAA_WRITEBACK` | `Labels3d::MsaaWriteback` |
| `node::PREPASS` | `Labels3d::Prepass` |
| `node::DEFERRED_PREPASS` | `Labels3d::DeferredPrepass` |
| `node::COPY_DEFERRED_LIGHTING_ID` | `Labels3d::CopyDeferredLightingId`
|
| `node::END_PREPASSES` | `Labels3d::EndPrepasses` |
| `node::START_MAIN_PASS` | `Labels3d::StartMainPass` |
| `node::MAIN_OPAQUE_PASS` | `Labels3d::MainOpaquePass` |
| `node::MAIN_TRANSMISSIVE_PASS` | `Labels3d::MainTransmissivePass` |
| `node::MAIN_TRANSPARENT_PASS` | `Labels3d::MainTransparentPass` |
| `node::END_MAIN_PASS` | `Labels3d::EndMainPass` |
| `node::BLOOM` | `Labels3d::Bloom` |
| `node::TONEMAPPING` | `Labels3d::Tonemapping` |
| `node::FXAA` | `Labels3d::Fxaa` |
| `node::UPSCALING` | `Labels3d::Upscaling` |
| `node::CONTRAST_ADAPTIVE_SHARPENING` |
`Labels3d::ContrastAdaptiveSharpening` |
| `node::END_MAIN_PASS_POST_PROCESSING` |
`Labels3d::EndMainPassPostProcessing` |
#### in `bevy_core_pipeline`
| old string-based path | new label |
|-----------------------|-----------|
| `taa::draw_3d_graph::node::TAA` | `Labels3d::Taa` |
#### in `bevy_pbr`
| old string-based path | new label |
|-----------------------|-----------|
| `draw_3d_graph::node::SHADOW_PASS` | `LabelsPbr::ShadowPass` |
| `ssao::draw_3d_graph::node::SCREEN_SPACE_AMBIENT_OCCLUSION` |
`LabelsPbr::ScreenSpaceAmbientOcclusion` |
| `deferred::DEFFERED_LIGHTING_PASS` | `LabelsPbr::DeferredLightingPass`
|
#### in `bevy_render`
| old string-based path | new label |
|-----------------------|-----------|
| `main_graph::node::CAMERA_DRIVER` | `graph::CameraDriverLabel` |
#### in `bevy_ui::render`
| old string-based path | new label |
|-----------------------|-----------|
| `draw_ui_graph::node::UI_PASS` | `graph::LabelsUi::UiPass` |
---
## Future work
* Make `NodeSlot`s also use types. Ideally, we have an enum with unit
variants where every variant resembles one slot. Then to make sure you
are using the right slot enum and make rust-analyzer play nicely with
it, we should make an associated type in the `Node` trait. With today's
system, we can introduce 3rd party slots to a node, and i wasnt sure if
this was used, so I didn't do this in this PR.
## Unresolved Questions
When looking at the `post_processing` example, we have a struct for the
label and a struct for the node, this seems like boilerplate and on
discord, @IceSentry (sowy for the ping)
[asked](https://discord.com/channels/691052431525675048/743663924229963868/1175197016947699742)
if a node could automatically introduce a label (or i completely
misunderstood that). The problem with that is, that nodes like
`EmptyNode` exist multiple times *inside the same* (sub)graph, so there
we need extern labels to distinguish between those. Hopefully we can
find a way to reduce boilerplate and still have everything unique. For
EmptyNode, we could maybe make a macro which implements an "empty node"
for a type, but for nodes which contain code and need to be present
multiple times, this could get nasty...
# Objective
- [`thiserror`](https://docs.rs/thiserror/) is used to derive the error
type on `bevy_dynamic_plugin`'s
[`DynamicPluginLoadError`](https://docs.rs/bevy_dynamic_plugin/latest/bevy_dynamic_plugin/enum.DynamicPluginLoadError.html).
- It is an enum where each variant wraps a `libloading` error type.
- `thiserror` supports marking this internal error types as `#[source]`
so it can automatically fill out the
[`Error::source`](https://doc.rust-lang.org/std/error/trait.Error.html#method.source)
method.
- This allows other error handling libraries to get more information
about the error than what Bevy by default provides. It increases
interoperability between libraries.
## Solution
- Mark the internal `libloading::Error` of `DynamicPluginLoadError` with
`#[source]`.
---
## Changelog
- Implemented the
[`Error::source`](https://doc.rust-lang.org/std/error/trait.Error.html#method.source)
method for
[`DynamicPluginLoadError`](https://docs.rs/bevy_dynamic_plugin/latest/bevy_dynamic_plugin/enum.DynamicPluginLoadError.html).
---
Here is the output from `cargo-expand` before and after the change.
```rust
// Before
impl Error for DynamicPluginLoadError {}
```
```rust
// After
impl Error for DynamicPluginLoadError {
fn source(&self) -> Option<&(dyn Error + 'static)> {
use thiserror::__private::AsDynError as _;
match self {
DynamicPluginLoadError::Library { 0: source, .. } => {
Some(source.as_dyn_error())
}
DynamicPluginLoadError::Plugin { 0: source, .. } => {
Some(source.as_dyn_error())
}
}
}
}
```
# Objective
- SavedAsset's iter_labels returns ```&str```, however accessing
LabeledAssets requires ```CowArc<'static, str>```
- Although SavedAsset holds UntypedHandles in its hashmap of
LabeledAssets, they are inaccessible as LabeledAssets are casted to
SavedAsset or ErasedLoadedAsset, which don't contain their
UntypedHandles
- Adresses #11609
## Solution
- Used Trait bounds to allow for either ```CowArc<'static, str>``` or
```&str``` to be used as a label in get_labeled and get_erased_labeled.
- Added method get_untyped_handle to get UntypedHandle from the
LabeledAsset.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- `impl_reflect_struct` doesn't cover tuple structs or enums.
- Problem brought up [on
Discord](https://discord.com/channels/691052431525675048/1002362493634629796/1190623345817960463).
## Solution
- Replaces `impl_reflect_struct` with the new `impl_reflect` which works
for tuple structs and enums too.
---
## Changelog
- Internally in `bevy_reflect_derive`, we have a new `ReflectProvenance`
type which is composed of `ReflectTraitToImpl` and `ReflectSource`.
- `impl_reflect_struct` is gone and totally superseded by
`impl_reflect`.
---------
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
# Objective
- Allow `HashMap<Cow<'_, T>, _>` to use `&T` as key for `HashMap::get`
- Makes `CowArc` more like `Cow`
## Solution
Implements `Borrow<T>` and `AsRef<T>` for `CowArc<T>`.
# Objective
Right now, all assets in the main world get extracted and prepared in
the render world (if the asset's using the RenderAssetPlugin). This is
unfortunate for two cases:
1. **TextureAtlas** / **FontAtlas**: This one's huge. The individual
`Image` assets that make up the atlas are cloned and prepared
individually when there's no reason for them to be. The atlas textures
are built on the CPU in the main world. *There can be hundreds of images
that get prepared for rendering only not to be used.*
2. If one loads an Image and needs to transform it in a system before
rendering it, kind of like the [decompression
example](https://github.com/bevyengine/bevy/blob/main/examples/asset/asset_decompression.rs#L120),
there's a price paid for extracting & preparing the asset that's not
intended to be rendered yet.
------
* References #10520
* References #1782
## Solution
This changes the `RenderAssetPersistencePolicy` enum to bitflags. I felt
that the objective with the parameter is so similar in nature to wgpu's
[`TextureUsages`](https://docs.rs/wgpu/latest/wgpu/struct.TextureUsages.html)
and
[`BufferUsages`](https://docs.rs/wgpu/latest/wgpu/struct.BufferUsages.html),
that it may as well be just like that.
```rust
// This asset only needs to be in the main world. Don't extract and prepare it.
RenderAssetUsages::MAIN_WORLD
// Keep this asset in the main world and
RenderAssetUsages::MAIN_WORLD | RenderAssetUsages::RENDER_WORLD
// This asset is only needed in the render world. Remove it from the asset server once extracted.
RenderAssetUsages::RENDER_WORLD
```
### Alternate Solution
I considered introducing a third field to `RenderAssetPersistencePolicy`
enum:
```rust
enum RenderAssetPersistencePolicy {
/// Keep the asset in the main world after extracting to the render world.
Keep,
/// Remove the asset from the main world after extracting to the render world.
Unload,
/// This doesn't need to be in the render world at all.
NoExtract, // <-----
}
```
Functional, but this seemed like shoehorning. Another option is renaming
the enum to something like:
```rust
enum RenderAssetExtractionPolicy {
/// Extract the asset and keep it in the main world.
Extract,
/// Remove the asset from the main world after extracting to the render world.
ExtractAndUnload,
/// This doesn't need to be in the render world at all.
NoExtract,
}
```
I think this last one could be a good option if the bitflags are too
clunky.
## Migration Guide
* `RenderAssetPersistencePolicy::Keep` → `RenderAssetUsage::MAIN_WORLD |
RenderAssetUsage::RENDER_WORLD` (or `RenderAssetUsage::default()`)
* `RenderAssetPersistencePolicy::Unload` →
`RenderAssetUsage::RENDER_WORLD`
* For types implementing the `RenderAsset` trait, change `fn
persistence_policy(&self) -> RenderAssetPersistencePolicy` to `fn
asset_usage(&self) -> RenderAssetUsages`.
* Change any references to `cpu_persistent_access`
(`RenderAssetPersistencePolicy`) to `asset_usage` (`RenderAssetUsage`).
This applies to `Image`, `Mesh`, and a few other types.
# Objective
- Address a `TODO` item in `bevy_animation`.
## Solution
- Replace the `cubic_spline_interpolation` macro with a function.
The function isn't marked as `#[inline(always)]` but from what I checked
with `cargo asm` it gets inlined (even in debug, unless I explicitly add
`#[inline(never)]`), so this should be identical to the macro. If needed
I can add the attribute.
Updates the requirements on
[erased-serde](https://github.com/dtolnay/erased-serde) to permit the
latest version.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/erased-serde/releases">erased-serde's
releases</a>.</em></p>
<blockquote>
<h2>0.4.2</h2>
<ul>
<li>Update proc-macro2 to fix caching issue when using a rustc-wrapper
such as sccache</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="8f555a2db2"><code>8f555a2</code></a>
Release 0.4.2</li>
<li><a
href="450a9108fc"><code>450a910</code></a>
Pull in proc-macro2 sccache fix</li>
<li><a
href="4726cdb49d"><code>4726cdb</code></a>
Release 0.4.1</li>
<li><a
href="4e04e70902"><code>4e04e70</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/erased-serde/issues/101">#101</a>
from dtolnay/sererror</li>
<li><a
href="c670c72da5"><code>c670c72</code></a>
Preserve error message of errors originated from Serialize impl</li>
<li><a
href="6893670cca"><code>6893670</code></a>
Ignore box_collection clippy lint</li>
<li><a
href="7ddf6aadd8"><code>7ddf6aa</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/erased-serde/issues/100">#100</a>
from KodrAus/fix/failing-serialize-impl</li>
<li><a
href="8227d20573"><code>8227d20</code></a>
handle the case where a Serialize fails without calling the
Serializer</li>
<li><a
href="160c15393e"><code>160c153</code></a>
Release 0.4.0</li>
<li><a
href="2e48977019"><code>2e48977</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/erased-serde/issues/99">#99</a>
from dtolnay/bench</li>
<li>Additional commits viewable in <a
href="https://github.com/dtolnay/erased-serde/compare/0.3.0...0.4.2">compare
view</a></li>
</ul>
</details>
<br />
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Objective
Revert the changes to type parameter bounds introduced in #9046,
improves the `#[reflect(where)]` attribute (also from #9046), and adds
the ability to opt out of field bounds.
This is based on suggestions by @soqb and discussion on
[Discord](https://discord.com/channels/691052431525675048/1002362493634629796/1201227833826103427).
## Solution
Reverts the changes to type parameter bounds when deriving `Reflect`,
introduced in #9046. This was originally done as a means of fixing a
recursion issue (#8965). However, as @soqb pointed out, we could achieve
the same result by simply making an opt-out attribute instead of messing
with the type parameter bounds.
This PR has four main changes:
1. Reverts the type parameter bounds from #9046
2. Includes `TypePath` as a default bound for active fields
3. Changes `#reflect(where)]` to be strictly additive
4. Adds `#reflect(no_field_bounds)]` to opt out of field bounds
Change 1 means that, like before, type parameters only receive at most
the `TypePath` bound (if `#[reflect(type_path = false)]` is not present)
and active fields receive the `Reflect` or `FromReflect` bound. And with
Change 2, they will also receive `TypePath` (since it's indirectly
required by `Typed` to construct `NamedField` and `UnnamedField`
instances).
Change 3 was made to make room for Change 4. By splitting out the
responsibility of `#reflect(where)]`, we can use it with or without
`#reflect(no_field_bounds)]` for various use cases.
For example, if we hadn't done this, the following would have failed:
```rust
// Since we're not using `#reflect(no_field_bounds)]`,
// `T::Assoc` is automatically given the required bounds
// of `FromReflect + TypePath`
#[derive(Reflect)]
#[reflect(where T::Assoc: OtherTrait)]
struct Foo<T: MyTrait> {
value: T::Assoc,
}
```
This provides more flexibility to the user while still letting them add
or remove most trait bounds.
And to solve the original recursion issue, we can do:
```rust
#[derive(Reflect)]
#[reflect(no_field_bounds)] // <-- Added
struct Foo {
foo: Vec<Foo>
}
```
#### Bounds
All in all, we now have four sets of trait bounds:
- `Self` gets the bounds `Any + Send + Sync`
- Type parameters get the bound `TypePath`. This can be opted out of
with `#[reflect(type_path = false)]`
- Active fields get the bounds `TypePath` and `FromReflect`/`Reflect`
bounds. This can be opted out of with `#reflect(no_field_bounds)]`
- Custom bounds can be added with `#[reflect(where)]`
---
## Changelog
- Revert some changes #9046
- `#reflect(where)]` is now strictly additive
- Added `#reflect(no_field_bounds)]` attribute to opt out of automatic
field trait bounds when deriving `Reflect`
- Made the `TypePath` requirement on fields when deriving `Reflect` more
explicit
## Migration Guide
> [!important]
> This PR shouldn't be a breaking change relative to the current version
of Bevy (v0.12). And since it removes the breaking parts of #9046, that
PR also won't need a migration guide.
# Objective
Currently, the `Capsule` primitive is technically dimension-agnostic in
that it implements both `Primitive2d` and `Primitive3d`. This seems good
on paper, but it can often be useful to have separate 2D and 3D versions
of primitives.
For example, one might want a two-dimensional capsule mesh. We can't
really implement both 2D and 3D meshing for the same type using the
upcoming `Meshable` trait (see #11431). We also currently don't
implement `Bounded2d` for `Capsule`, see
https://github.com/bevyengine/bevy/pull/11336#issuecomment-1890797788.
Having 2D and 3D separate at a type level is more explicit, and also
more consistent with the existing primitives, as there are no other
types that implement both `Primitive2d` and `Primitive3d` at the same
time.
## Solution
Rename `Capsule` to `Capsule3d` and add `Capsule2d`. `Capsule2d`
implements `Bounded2d`.
For now, I went for `Capsule2d` for the sake of consistency and clarity.
Mathematically the more accurate term would be `Stadium` or `Pill` (see
[Wikipedia](https://en.wikipedia.org/wiki/Stadium_(geometry))), but
those might be less obvious to game devs. For reference, Godot has
[`CapsuleShape2D`](https://docs.godotengine.org/en/stable/classes/class_capsuleshape2d.html).
I can rename it if others think the geometrically correct name is better
though.
---
## Changelog
- Renamed `Capsule` to `Capsule3d`
- Added `Capsule2d` with `Bounded2d` implemented
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Fixes#11479
## Solution
- Remove `collide_aabb.rs`
- Re-implement the example-specific collision code in the example,
taking advantage of the new `IntersectsVolume` trait.
## Changelog
- Removed `sprite::collide_aabb::collide` and
`sprite::collide_aabb::Collision`.
## Migration Guide
`sprite::collide_aabb::collide` and `sprite::collide_aabb::Collision`
were removed.
```rust
// Before
let collision = bevy::sprite::collide_aabb::collide(a_pos, a_size, b_pos, b_size);
if collision.is_some() {
// ...
}
// After
let collision = Aabb2d::new(a_pos.truncate(), a_size / 2.)
.intersects(&Aabb2d::new(b_pos.truncate(), b_size / 2.));
if collision {
// ...
}
```
If you were making use `collide_aabb::Collision`, see the new
`collide_with_side` function in the [`breakout`
example](https://bevyengine.org/examples/Games/breakout/).
## Discussion
As discussed in the linked issue, maybe we want to wait on `bevy_sprite`
generally making use of `Aabb2b` so users don't need to construct it
manually. But since they **do** need to construct the bounding circle
for the ball manually, this doesn't seem like a big deal to me.
---------
Co-authored-by: IQuick 143 <IQuick143cz@gmail.com>
# Objective
When developing my game I realized `extract_clusters` and
`prepare_clusters` systems are taking a lot of time despite me creating
very little lights. Reducing number of clusters from the default 4096 to
2048 or less greatly improved performance and stabilized FPS (~300 ->
1000+). I debugged it and found out that the main reason for this is
cloning `VisiblePointLights` in `extract_clusters` system. It contains
light entities grouped by clusters that they affect. The problem is that
we clone 4096 (assuming the default clusters configuration) vectors
every frame. If many of them happen to be non-empty it starts to be a
bottleneck because there is a lot of heap allocation. It wouldn't be a
problem if we reused those vectors in following frames but we don't.
## Solution
Avoid cloning multiple vectors and instead build a single vector
containing data for all clusters.
I've recorded a trace in `3d_scene` example with disabled v-sync before
and after the change.
Mean FPS went from 424 to 990. Mean time for `extract_clusters` system
was reduced from 210 us to 24 us and `prepare_clusters` from 189 us to
87 us.
---
## Changelog
- Improved performance of `extract_clusters` and `prepare_clusters`
systems for scenes where lights affect a big part of it.
# Objective
Fixes: https://github.com/bevyengine/bevy/issues/11549
Add a doctest example of what a custom implementation of an
`EntityMapper` would look like.
(need to wait until https://github.com/bevyengine/bevy/pull/11428 is
merged)
---------
Co-authored-by: Charles Bournhonesque <cbournhonesque@snapchat.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Hennadii Chernyshchyk <genaloner@gmail.com>
# Objective
The first part of #10569, split up from #11007.
The goal is to implement meshing support for Bevy's new geometric
primitives, starting with 2D primitives. 3D meshing will be added in a
follow-up, and we can consider removing the old mesh shapes completely.
## Solution
Add a `Meshable` trait that primitives need to implement to support
meshing, as suggested by the
[RFC](https://github.com/bevyengine/rfcs/blob/main/rfcs/12-primitive-shapes.md#meshing).
```rust
/// A trait for shapes that can be turned into a [`Mesh`].
pub trait Meshable {
/// The output of [`Self::mesh`]. This can either be a [`Mesh`]
/// or a builder used for creating a [`Mesh`].
type Output;
/// Creates a [`Mesh`] for a shape.
fn mesh(&self) -> Self::Output;
}
```
This PR implements it for the following primitives:
- `Circle`
- `Ellipse`
- `Rectangle`
- `RegularPolygon`
- `Triangle2d`
The `mesh` method typically returns a builder-like struct such as
`CircleMeshBuilder`. This is needed to support shape-specific
configuration for things like mesh resolution or UV configuration:
```rust
meshes.add(Circle { radius: 0.5 }.mesh().resolution(64));
```
Note that if no configuration is needed, you can even skip calling
`mesh` because `From<MyPrimitive>` is implemented for `Mesh`:
```rust
meshes.add(Circle { radius: 0.5 });
```
I also updated the `2d_shapes` example to use primitives, and tweaked
the colors to have better contrast against the dark background.
Before:
After:
Here you can see the UVs and different facing directions: (taken from
#11007, so excuse the 3D primitives at the bottom left)
---
## Changelog
- Added `bevy_render::mesh::primitives` module
- Added `Meshable` trait and implemented it for:
- `Circle`
- `Ellipse`
- `Rectangle`
- `RegularPolygon`
- `Triangle2d`
- Implemented `Default` and `Copy` for several 2D primitives
- Updated `2d_shapes` example to use primitives
- Tweaked colors in `2d_shapes` example to have better contrast against
the (new-ish) dark background
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Sending and receiving events of the same type in the same system is a
reasonably common need, generally due to event filtering.
- However, actually doing so is non-trivial, as the borrow checker
simultaneous hates mutable and immutable access.
## Solution
- Demonstrate two sensible patterns for doing so.
- Update the `ManualEventReader` docs to be more clear and link to this
example.
---------
Co-authored-by: Alice Cecile <alice.i.cecil@gmail.com>
Co-authored-by: Joona Aalto <jondolf.dev@gmail.com>
Co-authored-by: ickk <git@ickk.io>
# Objective
It can sometimes be useful to transform actual `Mesh` data without
needing to change the `Transform` of an entity. For example, one might
want to spawn a circle mesh facing up instead of facing Z, or to spawn a
mesh slightly offset without needing child entities.
## Solution
Add `transform_by` and `transformed_by` methods to `Mesh`. They take a
`Transform` and apply the translation, rotation, and scale to vertex
positions, and the rotation to normals and tangents.
In the `load_gltf` example, with this system:
```rust
fn transform(time: Res<Time>, mut q: Query<&mut Handle<Mesh>>, mut meshes: ResMut<Assets<Mesh>>) {
let sin = 0.0025 * time.elapsed_seconds().sin();
for mesh_handle in &mut q {
if let Some(mesh) = meshes.get_mut(mesh_handle.clone_weak()) {
let transform =
Transform::from_rotation(Quat::from_rotation_y(0.75 * time.delta_seconds()))
.with_scale(Vec3::splat(1.0 + sin));
mesh.transform_by(transform);
}
}
}
```
it looks like this:
https://github.com/bevyengine/bevy/assets/57632562/60432456-6d28-4d06-9c94-2f4148f5acd5
# Objective
Working towards finishing a part of #10572, this PR adds a ton of math
helpers and useful constructors for primitive shapes. I also tried
fixing some naming inconsistencies.
## Solution
- Add mathematical helpers like `area`, `volume`, `perimeter`,
`RegularPolygon::inradius` and so on, trying to cover all core
mathematical properties of each shape
- Add some constructors like `Rectangle::from_corners`,
`Cuboid::from_corners` and `Plane3d::from_points`
I also derived `PartialEq` for the shapes where it's trivial. Primitives
like `Line2d` and `Segment2d` are not trivial because you could argue
that they would be equal if they had an opposite direction.
All mathematical methods have tests with reference values computed by
hand or with external tools.
## Todo
- [x] Add tests to verify that the values from mathematical helpers are
correct
---------
Co-authored-by: IQuick 143 <IQuick143cz@gmail.com>
# Objective
Get #11257 changes merged.
I rewrote them one by one checking each to ensure correctness. In
particular, the window rescale logic changes to accomodate mut app
access are double checked. Not all changes have been included as some of
bevy_winit has since changed, and i am not confident including them.
Namely, the `run_app_update_if_should` change.
### Notes to reviewers
Review commits individually, use the "Hide whitespaces" diff display
mode.
## Changelog
* `bevy:🪟:WindowMoved`'s `entity` field has been renamed to
`window`
## Migration Guide
`bevy:🪟:WindowMoved`'s `entity` field has been renamed to
`window`. This is to be more consistent with other windowing events.
Consider changing usage:
```diff
-window_moved.entity
+window_moved.window
```
---------
Co-authored-by: François <mockersf@gmail.com>
# Objective
- Closes#11490.
- Allow retrieving the current asset watch behavior from the
`AssetServer`.
## Solution
- Add the corresponding getter. (also fixes some trailing whitespace).
A corresponding helper could also be added on the `AssetPlugin` struct
(returning `self.watch_for_changes_override.unwrap_or(cfg!(feature =
"watch"))`), but it seems it isn't a current practice to have actual
methods on the plugin structs appart from the `Plugin` impl.
---
## Changelog
### Added
Added `watching_for_changes` getter on `AssetServer`.
---------
Co-authored-by: Mateusz Wachowiak <mateusz_wachowiak@outlook.com>
# Objective
My motivation are to resolve some of the issues I describe in this
[PR](https://github.com/bevyengine/bevy/issues/11415):
- not being able to easily mapping entities because the current
EntityMapper requires `&mut World` access
- not being able to create my own `EntityMapper` because some components
(`Parent` or `Children`) do not provide any public way of modifying the
inner entities
This PR makes the `MapEntities` trait accept a generic type that
implements `Mapper` to perform the mapping.
This means we don't need to use `EntityMapper` to perform our mapping,
we can use any type that implements `Mapper`. Basically this change is
very similar to what `serde` does. Instead of specifying directly how to
map entities for a given type, we have 2 distinct steps:
- the user implements `MapEntities` to define how the type will be
traversed and which `Entity`s will be mapped
- the `Mapper` defines how the mapping is actually done
This is similar to the distinction between `Serialize` (`MapEntities`)
and `Serializer` (`Mapper`).
This allows networking library to map entities without having to use the
existing `EntityMapper` (which requires `&mut World` access and the use
of `world_scope()`)
## Migration Guide
- The existing `EntityMapper` (notably used to replicate `Scenes` across
different `World`s) has been renamed to `SceneEntityMapper`
- The `MapEntities` trait now works with a generic `EntityMapper`
instead of the specific struct `EntityMapper`.
Calls to `fn map_entities(&mut self, entity_mapper: &mut EntityMapper)`
need to be updated to
`fn map_entities<M: EntityMapper>(&mut self, entity_mapper: &mut M)`
- The new trait `EntityMapper` has been added to the prelude
---------
Co-authored-by: Charles Bournhonesque <cbournhonesque@snapchat.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: UkoeHB <37489173+UkoeHB@users.noreply.github.com>
# Objective
- `bevy_ui` fails to compile without `bevy_text` being enabled.
- Fixes#11363.
## Solution
- Add `#[cfg(feature = "bevy_text")]` to all items that require it.
I think this change is honestly a bit ugly, but I can't see any other
way around it. I considered making `bevy_text` required, but we agreed
[on
Discord](https://discord.com/channels/691052431525675048/743663673393938453/1196868117486379148)
that there were some use cases for `bevy_ui` without `bevy_text`. If you
have any ideas that decreases the amount of `#[cfg(...)]`s and
`#[allow(...)]`s, that would be greatly appreciated.
This was tested by running the following commands:
```shell
$ cargo clippy -p bevy_ui
$ cargo clippy -p bevy_ui -F bevy_text
$ cargo run -p ci
```
---
## Changelog
- Fixed `bevy_ui` not compiling without `bevy_text`.
# Objective
Fixes#8965.
#### Background
For convenience and to ensure everything is setup properly, we
automatically add certain bounds to the derived types. The current
implementation does this by taking the types from all active fields and
adding them to the where-clause of the generated impls. I believe this
method was chosen because it won't add bounds to types that are
otherwise ignored.
```rust
#[derive(Reflect)]
struct Foo<T, U: SomeTrait, V> {
t: T,
u: U::Assoc,
#[reflect(ignore)]
v: [V; 2]
}
// Generates something like:
impl<T, U: SomeTrait, V> for Foo<T, U, V>
where
// Active:
T: Reflect,
U::Assoc: Reflect,
// Ignored:
[V; 2]: Send + Sync + Any
{
// ...
}
```
The self-referential type fails because it ends up using _itself_ as a
type bound due to being one of its own active fields.
```rust
#[derive(Reflect)]
struct Foo {
foo: Vec<Foo>
}
// Foo where Vec<Foo>: Reflect -> Vec<T> where T: Reflect -> Foo where Vec<Foo>: Reflect -> ...
```
## Solution
We can't simply parse all field types for the name of our type. That
would be both complex and prone to errors and false-positives. And even
if it wasn't, what would we replace the bound with?
Instead, I opted to go for a solution that only adds the bounds to what
really needs it: the type parameters. While the bounds on concrete types
make errors a bit cleaner, they aren't strictly necessary. This means we
can change our generated where-clause to only add bounds to generic type
parameters.
Doing this, though, returns us back to the problem of over-bounding
parameters that don't need to be bounded. To solve this, I added a new
container attribute (based on
[this](https://github.com/dtolnay/syn/issues/422#issuecomment-406882925)
comment and @nicopap's
[comment](https://github.com/bevyengine/bevy/pull/9046#issuecomment-1623593780))
that allows us to pass in a custom where clause to modify what bounds
are added to these type parameters.
This allows us to do stuff like:
```rust
trait Trait {
type Assoc;
}
// We don't need `T` to be reflectable since we only care about `T::Assoc`.
#[derive(Reflect)]
#[reflect(where T::Assoc: FromReflect)]
struct Foo<T: Trait>(T::Assoc);
#[derive(TypePath)]
struct Bar;
impl Trait for Bar {
type Assoc = usize;
}
#[derive(Reflect)]
struct Baz {
a: Foo<Bar>,
}
```
> **Note**
> I also
[tried](dc139ea34c)
allowing `#[reflect(ignore)]` to be used on the type parameters
themselves, but that proved problematic since the derive macro does not
consume the attribute. This is why I went with the container attribute
approach.
### Alternatives
One alternative could possibly be to just not add reflection bounds
automatically (i.e. only add required bounds like `Send`, `Sync`, `Any`,
and `TypePath`).
The downside here is we add more friction to using reflection, which
already comes with its own set of considerations. This is a potentially
viable option, but we really need to consider whether or not the
ergonomics hit is worth it.
If we did decide to go the more manual route, we should at least
consider something like #5772 to make it easier for users to add the
right bounds (although, this could still become tricky with
`FromReflect` also being automatically derived).
### Open Questions
1. Should we go with this approach or the manual alternative?
2. ~~Should we add a `skip_params` attribute to avoid the `T: 'static`
trick?~~ ~~Decided to go with `custom_where()` as it's the simplest~~
Scratch that, went with a normal where clause
3. ~~`custom_where` bikeshedding?~~ No longer needed since we are using
a normal where clause
### TODO
- [x] Add compile-fail tests
---
## Changelog
- Fixed issue preventing recursive types from deriving `Reflect`
- Changed how where-clause bounds are generated by the `Reflect` derive
macro
- They are now only applied to the type parameters, not to all active
fields
- Added `#[reflect(where T: Trait, U::Assoc: Trait, ...)]` container
attribute
## Migration Guide
When deriving `Reflect`, generic type params that do not need the
automatic reflection bounds (such as `Reflect`) applied to them will
need to opt-out using a custom where clause like: `#[reflect(where T:
Trait, U::Assoc: Trait, ...)]`.
The attribute can define custom bounds only used by the reflection
impls. To simply opt-out all the type params, we can pass in an empty
where clause: `#[reflect(where)]`.
```rust
// BEFORE:
#[derive(Reflect)]
struct Foo<T>(#[reflect(ignore)] T);
// AFTER:
#[derive(Reflect)]
#[reflect(where)]
struct Foo<T>(#[reflect(ignore)] T);
```
---------
Co-authored-by: Nicola Papale <nicopap@users.noreply.github.com>
# Objective
- Fixes#11569
## Solution
- Add new methods to the Ext Trait
---
## Changelog
### Added
- Added new methods to the trait `AppGizmoBuilder`
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Implement common traits on primitives
## Solution
- Derive PartialEq on types that were missing it.
- Derive Copy on small types that were missing it.
- Derive Serialize/Deserialize if the feature on bevy_math is enabled.
- Add a lot of cursed stuff to the bevy_reflect `impls` module.
# Objective
- I wanted this for an example, and I think it's a fundamentally handy
debugging tool (with already public fields).
## Solution
- `derive(Debug)` for `FrameCount`
# Objective
- Fixes#11453
This is a temporary fix. There is PR fixing it (#11460), but I'm not
sure if it's going to be merged before the 0.13 release.
# Objective
- Implement an arc3d API for gizmos
- Solves #11536
## Solution
### `arc_3d`
- The current `arc3d` method on gizmos only takes an angle
- It draws an "standard arc" by default, this is an arc starting at
`Vec3::X`, in the XZ plane, in counter clockwise direction with a normal
that is facing up
- The "standard arc" can be customized with the usual gizmo builder
pattern. This way you'll be able to draw arbitrary arcs
### `short/long_arc_3d_between`
- Given `center`, `from`, `to` draws an arc between `from` and `to`
---
## Changelog
> This section is optional. If this was a trivial fix, or has no
externally-visible impact, you can delete this section.
- Added: `Gizmos::arc3d(&mut self, angle)` method
- Added: `Gizmos::long_arc_3d_between(&mut self, center, from, to)`
method
- Added: `Gizmos::short_arc_3d_between(&mut self, center, from, to)`
method
---
This PR factors out an orthogonal part of another PR as mentioned in
[this
comment](https://github.com/bevyengine/bevy/pull/11072#issuecomment-1883859573)
# Objective
Fixes#11311
## Solution
Adds an example to the documentation for `par_iter_mut`. I didn't add
any examples to `par_iter`, because I couldn't think of a good example
and I figure users can infer that `par_iter` and `par_iter_mut` are
similar.
# Objective
It's sometimes desirable to get a `Res<T>` rather than `&T` from
`World::get_resource`.
Alternative to #9940, partly adresses #9926
## Solution
added additional methods to `World` and `UnsafeWorldCell` to retrieve a
resource wrapped in a `Res`.
- `UnsafeWorldCell::get_resource_ref`
- `World::get_resource_ref`
- `World::resource_ref`
I can change it so `World::resource_mut` returns `ResMut` instead of
`Mut` as well if that's desired, but that could also be added later in a
seperate pr.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Mike <mike.hsu@gmail.com>
Co-authored-by: MinerSebas <66798382+MinerSebas@users.noreply.github.com>
# Objective
- Address junk leftover by TypeUuid removal
## Solution
- Get rid of unused deps and imports
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Resolves#11377
## Solution
- Add marker component `IsDefaultUiCamera` that will be choosen first as
the default camera.
If you want the IsDefaultUiCamera default camera to be in another
window, thats now possible.
- `IsDefaultUiCamera` is expected to be within a single Camera, if that
assertion fails, one PrimaryWindow Camera will be choosen.
---
## Changelog
### Added
- Added `IsDefaultUiCamera` marker component.
---------
Co-authored-by: Mateusz Wachowiak <mateusz_wachowiak@outlook.com>
# Objective
Allow TextureAtlasBuilder in AssetLoader.
Fixes#2987
## Solution
- TextureAtlasBuilder no longer hold just AssetIds that are used to
retrieve the actual image data in `finish`, but &Image instead.
- TextureAtlasBuilder now required AssetId only optionally (and it is
only used to retrieve the index from the AssetId in TextureAtlasLayout),
## Issues
- The issue mentioned here
https://github.com/bevyengine/bevy/pull/11474#issuecomment-1904676937
now also extends to the actual atlas texture. In short: Calling
add_texture multiple times for the same texture will lead to duplicate
image data in the atlas texture and additional indices.
If you provide an AssetId we can probably do something to de-duplicate
the entries while keeping insertion order (suggestions welcome on how
exactly). But if you don't then we are out of luck (unless we can and
want to hash the image, which I do not think we want).
---
## Changelog
### Changed
- TextureAtlasBuilder `add_texture` can be called without providing an
AssetId
- TextureAtlasBuilder `finish` no longer takes Assets<Image> and no
longer returns a Handle<Image>
## Migration Guide
- For `add_texture` you need to wrap your AssetId in Some
- `finish` now returns the atlas texture image directly instead of a
handle. Provide the atlas texture to `add` on Assets<Texture> to get a
Handle<Image>
# Objective
allow automatic fixing of bad joint weights.
fix#10447
## Solution
- remove automatic normalization of vertexes with all zero joint
weights.
- add `Mesh::normalize_joint_weights` which fixes zero joint weights,
and also ensures that all weights sum to 1. this is a manual call as it
may be slow to apply to large skinned meshes, and is unnecessary if you
have control over the source assets.
note: this became a more significant problem with 0.12, as weights that
are close to, but not exactly 1 now seem to use `Vec3::ZERO` for the
unspecified weight, where previously they used the entity translation.
# Objective
DXC+DX12 debug builds with an environment map have been broken since
https://github.com/bevyengine/bevy/pull/11366 merged due to an internal
compiler error in DXC. I tracked it down to a single `break` statement
and reported it upstream
(https://github.com/microsoft/DirectXShaderCompiler/issues/6183)
## Solution
Workaround the ICE by setting the for loop index variable to the max
value of the loop to avoid the `break` that's causing the ICE.
This works because it's the last thing in the for loop.
The `reflection_probes` and `pbr` examples both appear to still work
correctly.
# Objective
After #10520, I was experiencing seriously degraded performance that
ended up being due to never-drained `AssetEvent` events causing havoc
inside `extract_render_asset::<A>`. The same events being read over and
over again meant the same assets were being prepared every frame for
eternity. For what it's worth, I was noticing this on a static scene
about every 3rd or so time running my project.
* References #10520
* Fixes#11240
Why these events aren't sometimes drained between frames is beyond me
and perhaps worthy of another investigation, but the approach in this PR
effectively restores the original cached `EventReader` behavior (which
fixes it).
## Solution
I followed the [`CachedSystemState`
example](3a666cab23/crates/bevy_ecs/src/system/function_system.rs (L155))
to make sure that the `EventReader` state is cached between frames like
it used to be when it was an argument of `extract_render_asset::<A>`.
# Objective
Plugins are an incredible tool for encapsulating functionality. They are
low-key one of Bevy's best features. Combined with rust's module and
privacy system, it's a match made in heaven.
The one downside is that they can be a little too verbose to define. 90%
of all plugin definitions look something like this:
```rust
pub struct MyPlugin;
impl Plugin for MyPlugin {
fn build(&self, app: &mut App) {
app.init_resource::<CameraAssets>()
.add_event::<SetCamera>()
.add_systems(Update, (collect_set_camera_events, drive_camera).chain());
}
}
```
Every so often it gets a little spicier:
```rust
pub struct MyGenericPlugin<T>(PhantomData<T>);
impl<T> Default for MyGenericPlugin<T> {
fn default() -> Self { ... }
}
impl<T> Plugin for MyGenericPlugin<T> { ... }
```
This is an annoying amount of boilerplate. Ideally, plugins should be
focused and small in scope, which means any app is going to have a *lot*
of them. Writing a plugin should be as easy as possible, and the *only*
part of this process that carries any meaning is the body of `fn build`.
## Solution
Implement `Plugin` for functions that take `&mut App` as a parameter.
The two examples above now look like this:
```rust
pub fn my_plugin(app: &mut App) {
app.init_resource::<CameraAssets>()
.add_event::<SetCamera>()
.add_systems(Update, (collect_set_camera_events, drive_camera).chain());
}
pub fn my_generic_plugin<T>(app: &mut App) {
// No need for PhantomData, it just works.
}
```
Almost all plugins can be written this way, which I believe will make
bevy code much more attractive. Less boilerplate and less meaningless
indentation. More plugins with smaller scopes.
---
## Changelog
The `Plugin` trait is now implemented for all functions that take `&mut
App` as their only parameter. This is an abbreviated way of defining
plugins with less boilerplate than manually implementing the trait.
---------
Co-authored-by: Federico Rinaldi <gisquerin@gmail.com>
# Objective
Fixes#11533
When `AssetPath`s are created from a string type, they are parsed into
an `AssetSource`, a `Path`, and a `Label`.
The current method of parsing has some unnecessary quirks:
- The presence of a `:` character is assumed to be the start of an asset
source indicator.
- This is not necessarily true. There are valid uses of a `:` character
in an asset path, for example an http source's port such as
`localhost:80`.
- If there are multiple instances of `://`, the last one is assumed to
be the asset source deliminator.
- This has some unexpected behavior. Even in a fully formed path, such
as `http://localhost:80`, the `:` between `localhost` and `80` is
assumed to be the start of an asset source, causing an error since it
does not form the full sequence `://`.
## Solution
Changes the `AssetPath`'s `parse_internal` method to be more permissive.
- Only the exact sequence `://` is taken to be the asset source
deliminator, and only the first one if there are multiple.
- As a consequence, it is no longer possible to detect a malformed asset
source deliminator, and so the corresponding error was removed.
# Objective
https://github.com/bevyengine/bevy/pull/5103 caused a bug where
`Sprite::rect` was ignored by the engine. (Did nothing)
## Solution
My solution changes the way how Bevy calculates the rect, based on this
table:
| `atlas_rect` | `Sprite::rect` | Result |
|--------------|----------------|------------------------------------------------------|
| `None` | `None` | `None` |
| `None` | `Some` | `Sprite::rect` |
| `Some` | `None` | `atlas_rect` |
| `Some` | `Some` | `Sprite::rect` is used, relative to `atlas_rect.min`
|
# Objective
One of a few Bevy Asset improvements I would like to make: #11216.
Currently asset processing and asset saving are handled by the same
trait, `AssetSaver`. This makes it difficult to reuse saving
implementations and impossible to have a single "universal" saver for a
given asset type.
## Solution
This PR splits off the processing portion of `AssetSaver` into
`AssetTransformer`, which is responsible for transforming assets. This
change involves adding the `LoadTransformAndSave` processor, which
utilizes the new API. The `LoadAndSave` still exists since it remains
useful in situations where no "transformation" of the asset is done,
such as when compressing assets.
## Notes:
As an aside, Bikeshedding is welcome on the names. I'm not entirely
convinced by `AssetTransformer`, which was chosen mostly because
`AssetProcessor` is taken. Additionally, `LoadTransformSave` may be
sufficient instead of `LoadTransformAndSave`.
---
## Changelog
### Added
- `AssetTransformer` which is responsible for transforming Assets.
- `LoadTransformAndSave`, a `Process` implementation.
### Changed
- Changed `AssetSaver`'s responsibilities from processing and saving to
just saving.
- Updated `asset_processing` example to use new API.
- Old asset .meta files regenerated with new processor.
# Objective
Keep core dependencies up to date.
## Solution
Update the dependencies.
wgpu 0.19 only supports raw-window-handle (rwh) 0.6, so bumping that was
included in this.
The rwh 0.6 version bump is just the simplest way of doing it. There
might be a way we can take advantage of wgpu's new safe surface creation
api, but I'm not familiar enough with bevy's window management to
untangle it and my attempt ended up being a mess of lifetimes and rustc
complaining about missing trait impls (that were implemented). Thanks to
@MiniaczQ for the (much simpler) rwh 0.6 version bump code.
Unblocks https://github.com/bevyengine/bevy/pull/9172 and
https://github.com/bevyengine/bevy/pull/10812
~~This might be blocked on cpal and oboe updating their ndk versions to
0.8, as they both currently target ndk 0.7 which uses rwh 0.5.2~~ Tested
on android, and everything seems to work correctly (audio properly stops
when minimized, and plays when re-focusing the app).
---
## Changelog
- `wgpu` has been updated to 0.19! The long awaited arcanization has
been merged (for more info, see
https://gfx-rs.github.io/2023/11/24/arcanization.html), and Vulkan
should now be working again on Intel GPUs.
- Targeting WebGPU now requires that you add the new `webgpu` feature
(setting the `RUSTFLAGS` environment variable to
`--cfg=web_sys_unstable_apis` is still required). This feature currently
overrides the `webgl2` feature if you have both enabled (the `webgl2`
feature is enabled by default), so it is not recommended to add it as a
default feature to libraries without putting it behind a flag that
allows library users to opt out of it! In the future we plan on
supporting wasm binaries that can target both webgl2 and webgpu now that
wgpu added support for doing so (see
https://github.com/bevyengine/bevy/issues/11505).
- `raw-window-handle` has been updated to version 0.6.
## Migration Guide
- `bevy_render::instance_index::get_instance_index()` has been removed
as the webgl2 workaround is no longer required as it was fixed upstream
in wgpu. The `BASE_INSTANCE_WORKAROUND` shaderdef has also been removed.
- WebGPU now requires the new `webgpu` feature to be enabled. The
`webgpu` feature currently overrides the `webgl2` feature so you no
longer need to disable all default features and re-add them all when
targeting `webgpu`, but binaries built with both the `webgpu` and
`webgl2` features will only target the webgpu backend, and will only
work on browsers that support WebGPU.
- Places where you conditionally compiled things for webgl2 need to be
updated because of this change, eg:
- `#[cfg(any(not(feature = "webgl"), not(target_arch = "wasm32")))]`
becomes `#[cfg(any(not(feature = "webgl") ,not(target_arch = "wasm32"),
feature = "webgpu"))]`
- `#[cfg(all(feature = "webgl", target_arch = "wasm32"))]` becomes
`#[cfg(all(feature = "webgl", target_arch = "wasm32", not(feature =
"webgpu")))]`
- `if cfg!(all(feature = "webgl", target_arch = "wasm32"))` becomes `if
cfg!(all(feature = "webgl", target_arch = "wasm32", not(feature =
"webgpu")))`
- `create_texture_with_data` now also takes a `TextureDataOrder`. You
can probably just set this to `TextureDataOrder::default()`
- `TextureFormat`'s `block_size` has been renamed to `block_copy_size`
- See the `wgpu` changelog for anything I might've missed:
https://github.com/gfx-rs/wgpu/blob/trunk/CHANGELOG.md
---------
Co-authored-by: François <mockersf@gmail.com>
# Objective
Make APIs more consistent and ergonomic by adding a `new` constructor
for `Circle` and `Sphere`.
This could be seen as a redundant "trivial constructor", but in
practise, it seems valuable to me. I have lots of cases where formatting
becomes ugly because of the lack of a constructor, like this:
```rust
Circle {
radius: self.radius(),
}
.contains_local_point(centered_pt)
```
With `new`, it'd be formatted much nicer:
```rust
Circle::new(self.radius()).contains_local_point(centered_pt)
```
Of course, this is just one example, but my circle/sphere definitions
very frequently span three or more lines when they could fit on one.
Adding `new` also increases consistency. `Ellipse` has `new` already,
and so does the mesh version of `Circle`.
## Solution
Add a `new` constructor for `Circle` and `Sphere`.
# Objective
- Fix documentation for `AssetReader::is_directory` (it is currently
exactly the same as docs for `read_directory`)
---------
Co-authored-by: Kanabenki <lucien.menassol@gmail.com>
# Objective
- Some passes recreate a sampler when creating a bind group to be
cached, even if the sampler is always the same.
## Solution
- Store the sampler in the corresponding pipeline resource.
# Objective
While working on #11527 I spotted that the internal field for the label
of a `Schedule` is called `name`. Using `label` seems more in line with
the other naming across Bevy.
## Solution
Renaming the field was straightforward since it's not exposed outside of
the module. This also means a changelog or migration guide isn't
necessary.
# Objective
Fixes#11411
## Solution
- Added a simple example how to create and configure custom schedules
that are run by the `Main` schedule.
- Spot checked some of the API docs used, fixed `App::add_schedule` docs
that referred to a function argument that was removed by #9600.
## Open Questions
- While spot checking the docs, I noticed that the `Schedule` label is
stored in a field called `name` instead of `label`. This seems
unintuitive since the term label is used everywhere else. Should we
change that field name? It was introduced in #9600. If so, I do think
this change would be out of scope for this PR that mainly adds the
example.
# Objective
Rust analyzer kept complaining about a cyclic dependency due to
`bevy_input` having a dev-dependency on `bevy`.
`bevy_input` was also missing `bevy_reflect`'s "smol_str" feature which
it needs to compile on its own.
Fixes#10256
## Solution
Remove the dev-dependency on `bevy` from `bevy_input` since it was only
used to reduce imports for 1 test and 3 doc examples by 1 line each, as
`bevy_input` already has dependencies on everything needed for those
tests and doctests to work.
Add `bevy_reflect`'s "smol_str" feature to `bevy_input`'s dependency
list as it needs it to actually compile.
# Objective
Fixes#10414.
That issue and its comments do a great job of laying out the case for
this.
## Solution
Added an optional `spatial_scale` field to `PlaybackSettings`, which
overrides the default value set on `AudioPlugin`.
## Changelog
- `AudioPlugin::spatial_scale` has been renamed to
`default_spatial_scale`.
- `SpatialScale` is no longer a resource and is wrapped by
`DefaultSpatialScale`.
- Added an optional `spatial_scale` to `PlaybackSettings`.
## Migration Guide
`AudioPlugin::spatial_scale` has been renamed to `default_spatial_scale`
and the default spatial scale can now be overridden on individual audio
sources with `PlaybackSettings::spatial_scale`.
If you were modifying or reading `SpatialScale` at run time, use
`DefaultSpatialScale` instead.
```rust
// before
app.add_plugins(DefaultPlugins.set(AudioPlugin {
spatial_scale: SpatialScale::new(AUDIO_SCALE),
..default()
}));
// after
app.add_plugins(DefaultPlugins.set(AudioPlugin {
default_spatial_scale: SpatialScale::new(AUDIO_SCALE),
..default()
}));
```
# Objective
TypeUuid is deprecated, remove it.
## Migration Guide
Convert any uses of `#[derive(TypeUuid)]` with `#[derive(TypePath]` for
more complex uses see the relevant
[documentation](https://docs.rs/bevy/latest/bevy/prelude/trait.TypePath.html)
for more information.
---------
Co-authored-by: ebola <dev@axiomatic>
# Objective
- Fixes a hurdle encountered when debugging a panic caused by the file
watcher loading a `.gitignore` file, which was hard to debug because
there was no file name in the report, only `asset paths must have
extensions`
## Solution
- Panic with a formatted message that includes the asset path, e.g.
`missing expected extension for asset path .gitignore`
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Doonv <58695417+doonv@users.noreply.github.com>
Updates the requirements on
[ruzstd](https://github.com/KillingSpark/zstd-rs) to permit the latest
version.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/KillingSpark/zstd-rs/releases">ruzstd's
releases</a>.</em></p>
<blockquote>
<h2>Even better no_std</h2>
<p>Switching from thiserror to derive_more allows for no_std builds on
stable rust</p>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/KillingSpark/zstd-rs/blob/master/Changelog.md">ruzstd's
changelog</a>.</em></p>
<blockquote>
<h1>After 0.5.0</h1>
<ul>
<li>Make the hashing checksum optional (thanks to <a
href="https://github.com/tamird"><code>@tamird</code></a>)
<ul>
<li>breaking change as the public API changes based on features</li>
</ul>
</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="e620d2a856"><code>e620d2a</code></a>
Merge pull request <a
href="https://redirect.github.com/KillingSpark/zstd-rs/issues/50">#50</a>
from KillingSpark/remove_thiserror</li>
<li><a
href="9e9d204c63"><code>9e9d204</code></a>
make clippy happy</li>
<li><a
href="f4a6fc0cc1"><code>f4a6fc0</code></a>
bump the version, this is an incompatible change</li>
<li><a
href="64d65b5c4f"><code>64d65b5</code></a>
fix test compile...</li>
<li><a
href="07bbda98c8"><code>07bbda9</code></a>
remove the error_in_core feature and switch the io_nostd to use the
Display t...</li>
<li><a
href="e15eb1e568"><code>e15eb1e</code></a>
Merge pull request <a
href="https://redirect.github.com/KillingSpark/zstd-rs/issues/49">#49</a>
from tamird/clippy</li>
<li><a
href="92a3f2e6b2"><code>92a3f2e</code></a>
Avoid unnecessary cast</li>
<li><a
href="f588d5c362"><code>f588d5c</code></a>
Avoid slow zero-filling initialization</li>
<li><a
href="e79f09876f"><code>e79f098</code></a>
Avoid single-match expression</li>
<li><a
href="c75cc2fbb9"><code>c75cc2f</code></a>
Remove useless assertion</li>
<li>Additional commits viewable in <a
href="https://github.com/KillingSpark/zstd-rs/compare/v0.4.0...v0.5.0">compare
view</a></li>
</ul>
</details>
<br />
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Objective
- `AssetPath` implements reflection, but is not registered as a type in
the plugin.
- Fixes#11481.
## Solution
- Register the `AssetPath` type when `AssetPlugin::build` is called.
---
## Changelog
- Registered `AssetPath` type for use in reflection.
# Objective
- `World::get_resource`'s comment on it's `unsafe` usage meant to say
"mutably" but instead said "immutably."
- Fixes#11430.
## Solution
- Replace "immutably" with "mutably."
# Objective
#10946 added bounding volume types and an `IntersectsVolume` trait, but
didn't actually implement intersections between bounding volumes.
This PR implements AABB-AABB, circle-circle / sphere-sphere, and
AABB-circle / AABB-sphere intersections.
## Solution
Implement `IntersectsVolume` for bounding volume pairs. I also added
`closest_point` methods to return the closest point on the surface /
inside of bounding volumes. This is used for AABB-circle / AABB-sphere
intersections.
---------
Co-authored-by: IQuick 143 <IQuick143cz@gmail.com>
# Objective
TextureAtlases are commonly used to drive animations described as a
consecutive range of indices. The current TextureAtlasBuilder uses the
AssetId of the image to determine the index of the texture in the
TextureAtlas. The AssetId of an Image Asset can change between runs.
The TextureAtlas exposes
[`get_texture_index`](https://docs.rs/bevy/latest/bevy/sprite/struct.TextureAtlas.html#method.get_texture_index)
to get the index from a given AssetId, but this needlessly complicates
the process of creating a simple TextureAtlas animation.
Fixes#2459
## Solution
- Use the (ordered) image_ids of the 'texture to place' vector to
retrieve the packed locations and compose the textures of the
TextureAtlas.
# Objective
It would be convenient to be able to call functions with `Commands` as a
parameter without having to move your own instance of `Commands`. Since
this struct is composed entirely of references, we can easily get an
owned instance of `Commands` by shortening the lifetime.
## Solution
Add `Commands::reborrow`, `EntiyCommands::reborrow`, and
`Deferred::reborrow`, which returns an owned version of themselves with
a shorter lifetime.
Remove unnecessary lifetimes from `EntityCommands`. The `'w` and `'s`
lifetimes only have to be separate for `Commands` because it's used as a
`SystemParam` -- this is not the case for `EntityCommands`.
---
## Changelog
Added `Commands::reborrow`. This is useful if you have `&mut Commands`
but need `Commands`. Also added `EntityCommands::reborrow` and
`Deferred:reborrow` which serve the same purpose.
## Migration Guide
The lifetimes for `EntityCommands` have been simplified.
```rust
// Before (Bevy 0.12)
struct MyStruct<'w, 's, 'a> {
commands: EntityCommands<'w, 's, 'a>,
}
// After (Bevy 0.13)
struct MyStruct<'a> {
commands: EntityCommands<'a>,
}
```
The method `EntityCommands::commands` now returns `Commands` rather than
`&mut Commands`.
```rust
// Before (Bevy 0.12)
let commands = entity_commands.commands();
commands.spawn(...);
// After (Bevy 0.13)
let mut commands = entity_commands.commands();
commands.spawn(...);
```
# Objective
Document a few common cases of which lifetime is required when using
SystemParam Derive
## Solution
Added a table in the doc comment
---------
Co-authored-by: laund <me@laund.moe>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Prep for https://github.com/bevyengine/bevy/pull/10164
- Make deferred_lighting_pass_id a ColorAttachment
- Correctly extract shadow view frusta so that the view uniforms get
populated
- Make some needed things public
- Misc formatting
# Objective
- Extend reflection to the standard library's `Wrapping` and
`Saturating` generic types.
This wasn't my use-case but someone in the discord was surprised that
this wasn't already done. I decided to make a PR because the other
`std::num` items were reflected and if there's a reason to exclude
`Wrapping` and `Saturating`, I am unaware of it.
## Solution
Trivial fix
---
## Changelog
Implemented `Reflect` for `Wrapping<T>` and `Saturating<T>` from
`std::num`.
# Objective
> Can anyone explain to me the reasoning of renaming all the types named
Query to Data. I'm talking about this PR
https://github.com/bevyengine/bevy/pull/10779 It doesn't make sense to
me that a bunch of types that are used to run queries aren't named Query
anymore. Like ViewQuery on the ViewNode is the type of the Query. I
don't really understand the point of the rename, it just seems like it
hides the fact that a query will run based on those types.
[@IceSentry](https://discord.com/channels/691052431525675048/692572690833473578/1184946251431694387)
## Solution
Revert several renames in #10779.
## Changelog
- `ViewNode::ViewData` is now `ViewNode::ViewQuery` again.
## Migration Guide
- This PR amends the migration guide in
https://github.com/bevyengine/bevy/pull/10779
---------
Co-authored-by: atlas dostal <rodol@rivalrebels.com>
# Objective
- Add the ability to describe storage texture bindings when deriving
`AsBindGroup`.
- This is especially valuable for the compute story of bevy which
deserves some extra love imo.
## Solution
- This add the ability to annotate struct fields with a
`#[storage_texture(0)]` annotation.
- Instead of adding specific option parsing for all the image formats
and access modes, I simply accept a token stream and defer checking to
see if the option is valid to the compiler. This still results in useful
and friendly errors and is free to maintain and always compatible with
wgpu changes.
---
## Changelog
- The `#[storage_texture(..)]` annotation is now accepted for fields of
`Handle<Image>` in structs that derive `AsBindGroup`.
- The game_of_life compute shader example has been updated to use
`AsBindGroup` together with `[storage_texture(..)]` to obtain the
`BindGroupLayout`.
## Migration Guide
# Objective
#8219 changed the target type of a `transmute` without changing the one
transmuting from ([see the relevant
diff](55e9ab7c92 (diff-11413fb2eeba97978379d325353d32aa76eefd0af0c8e9b50b7f394ddfda7a26R351-R355))),
making them incompatible. This PR fixes this by changing the initial
type to match the target one (modulo lifetimes).
## Solution
Change the type to be transmuted from to match the one transmuting into
(modulo lifetimes)
# Objective
- This PR makes it so that `ReflectSerialize` and `ReflectDeserialize`
traits are properly derived on `Name`. This avoids having the internal
hash “leak” into the serialization when using reflection.
## Solution
- Added a conditional derive for `ReflectDeserialize` and
`ReflectSerialize` via `#[cfg_attr()]`
---
## Changelog
- `Name` now implements `ReflectDeserialize` and `ReflectSerialize`
whenever the `serialize` feature is enabled.
# Objective
Fix weird visuals when drawing a gizmo with a non-normed normal.
Fixes#11401
## Solution
Just normalize right before we draw. Could do it when constructing the
builder but that seems less consistent.
## Changelog
- gizmos.circle normal is now a Direction3d instead of a Vec3.
## Migration Guide
- Pass a Direction3d for gizmos.circle normal, eg.
`Direction3d::new(vec).unwrap_or(default)` or potentially
`Direction3d::new_unchecked(vec)` if you know your vec is definitely
normalized.
# Objective
- Since #11218, example `asset_processing` fails:
```
thread 'main' panicked at crates/bevy_asset/src/io/source.rs:489:18:
Failed to create file watcher: Error { kind: PathNotFound, paths: ["examples/asset/processing/imported_assets/Default"] }
```
start from a fresh git clone or delete the folder before running to
reproduce, it is in gitignore and should not be present on a fresh run
a657478675/.gitignore (L18)
## Solution
- Auto create the `imported_assets` folder if it is configured
---------
Co-authored-by: Kyle <37520732+nvdaz@users.noreply.github.com>
# Objective
`Direction2d::from_normalized` & `Direction3d::from_normalized` don't
emphasize that importance of the vector being normalized enough.
## Solution
Rename `from_normalized` to `new_unchecked` and add more documentation.
---
`Direction2d` and `Direction3d` were added somewhat recently in
https://github.com/bevyengine/bevy/pull/10466 (after 0.12), so I don't
think documenting the changelog and migration guide is necessary (Since
there is no major previous version to migrate from).
But here it is anyway in case it's needed:
## Changelog
- Renamed `Direction2d::from_normalized` and
`Direction3d::from_normalized` to `new_unchecked`.
## Migration Guide
- Renamed `Direction2d::from_normalized` and
`Direction3d::from_normalized` to `new_unchecked`.
---------
Co-authored-by: Tristan Guichaoua <33934311+tguichaoua@users.noreply.github.com>
Co-authored-by: Joona Aalto <jondolf.dev@gmail.com>
# Objective
Currently, the `primitives` module is inside of the prelude for
`bevy_math`, but the actual primitives are not. This requires either
importing the shapes everywhere that uses them, or adding the
`primitives::` prefix:
```rust
let rectangle = meshes.add(primitives::Rectangle::new(5.0, 2.5));
```
(Note: meshing isn't actually implemented yet, but it's in #11431)
The primitives are meant to be used for a variety of tasks across
several crates, like for meshing, bounding volumes, gizmos, colliders,
and so on, so I think having them in the prelude is justified. It would
make several common tasks a lot more ergonomic.
```rust
let rectangle = meshes.add(Rectangle::new(5.0, 2.5));
```
## Solution
Add `primitives::*` to `bevy_math::prelude`.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Currently, the only way to create an AABB is to specify its `min` and
`max` coordinates. However, it's often more useful to use the center and
half-size instead.
## Solution
Add `new` constructors for `Aabb2d` and `Aabb3d`.
This:
```rust
let aabb = Aabb3d {
min: center - half_size,
max: center + half_size,
}
```
becomes this:
```rust
let aabb = Aabb3d::new(center, half_size);
```
I also made the usage of "half-extents" vs. "half-size" a bit more
consistent.
# Objective
Currently, the `Ellipse` primitive is represented by a `half_width` and
`half_height`. To improve consistency (similarly to #11434), it might
make more sense to use a `Vec2` `half_size` instead.
Alternatively, to make the elliptical nature clearer, the properties
could also be called `radius_x` and `radius_y`.
Secondly, `Ellipse::new` currently takes a *full* width and height
instead of two radii. I would expect it to take the half-width and
half-height because ellipses and circles are almost always defined using
radii. I wouldn't expect `Circle::new` to take a diameter (if we had
that method).
## Solution
Change `Ellipse` to store a `half_size` and `new` to take the half-width
and half-height.
I also added a `from_size` method similar to `Rectangle::from_size`, and
added the `semi_minor` and `semi_major` helpers to get the
semi-minor/major radius.
# Objective
The `Rectangle` and `Cuboid` primitives currently use different
representations:
```rust
pub struct Rectangle {
/// The half width of the rectangle
pub half_width: f32,
/// The half height of the rectangle
pub half_height: f32,
}
pub struct Cuboid {
/// Half of the width, height and depth of the cuboid
pub half_extents: Vec3,
}
```
The property names and helpers are also inconsistent. `Cuboid` has
`half_extents`, but it also has a method called `from_size`. Most
existing code also uses "size" instead of "extents".
## Solution
Represent both `Rectangle` and `Cuboid` with `half_size` properties.
# Objective
Implements #9216
## Solution
- Replace `DiagnosticId` by `DiagnosticPath`. It's pre-hashed using
`const-fnv1a-hash` crate, so it's possible to create path in const
contexts.
---
## Changelog
- Replaced `DiagnosticId` by `DiagnosticPath`
- Set default history length to 120 measurements (2 seconds on 60 fps).
I've noticed hardcoded constant 20 everywhere and decided to change it
to `DEFAULT_MAX_HISTORY_LENGTH` , which is set to new diagnostics by
default. To override it, use `with_max_history_length`.
## Migration Guide
```diff
- const UNIQUE_DIAG_ID: DiagnosticId = DiagnosticId::from_u128(42);
+ const UNIQUE_DIAG_PATH: DiagnosticPath = DiagnosticPath::const_new("foo/bar");
- Diagnostic::new(UNIQUE_DIAG_ID, "example", 10)
+ Diagnostic::new(UNIQUE_DIAG_PATH).with_max_history_length(10)
- diagnostics.add_measurement(UNIQUE_DIAG_ID, || 42);
+ diagnostics.add_measurement(&UNIQUE_DIAG_ID, || 42);
```
# Objective
- since #9685 ,bevy introduce automatic batching of draw commands,
- `batch_and_prepare_render_phase` take the responsibility for batching
`phaseItem`,
- `GetBatchData` trait is used for indentify each phaseitem how to
batch. it defines a associated type `Data `used for Query to fetch data
from world.
- however,the impl of `GetBatchData ` in bevy always set ` type
Data=Entity` then we acually get following code
`let entity:Entity =query.get(item.entity())` that cause unnecessary
overhead .
## Solution
- remove associated type `Data ` and `Filter` from `GetBatchData `,
- change the type of the `query_item ` parameter in get_batch_data from`
Self::Data` to `Entity`.
- `batch_and_prepare_render_phase ` no longer takes a query using
`F::Data, F::Filter`
- `get_batch_data `now returns `Option<(Self::BufferData,
Option<Self::CompareData>)>`
---
## Performance
based in main merged with #11290
Window 11 ,Intel 13400kf, NV 4070Ti
frame time from 3.34ms to 3 ms, ~ 10%
`batch_and_prepare_render_phase` from 800us ~ 400 us
## Migration Guide
trait `GetBatchData` no longer hold associated type `Data `and `Filter`
`get_batch_data` `query_item `type from `Self::Data` to `Entity` and
return `Option<(Self::BufferData, Option<Self::CompareData>)>`
`batch_and_prepare_render_phase` should not have a query
# Objective
Adjust bevy internals to utilize `Option<Res<State<S>>>` instead of
`Res<State<S>>`, to allow for adding/removing states at runtime and
avoid unexpected panics.
As requested here:
https://github.com/bevyengine/bevy/pull/10088#issuecomment-1869185413
---
## Changelog
- Changed the use of `world.resource`/`world.resource_mut` to
`world.get_resource`/`world.get_resource_mut` in the
`run_enter_schedule` and `apply_state_transition` systems and handled
the `None` option.
- `in_state` now returns a ` FnMut(Option<Res<State<S>>>) -> bool +
Clone`, returning `false` if the resource doesn't exist.
- `state_exists_and_equals` was marked as deprecated, and now just runs
and returns `in_state`, since their bevhaviour is now identical
- `state_changed` now takes an `Option<Res<State<S>>>` and returns
`false` if it does not exist.
I would like to remove `state_exists_and_equals` fully, but wanted to
ensure that is acceptable before doing so.
---------
Co-authored-by: Mike <mike.hsu@gmail.com>
# Objective
- `FromType<T>` for `ReflectComponent` and `ReflectBundle` currently
require `T: FromWorld` for two reasons:
- they include a `from_world` method;
- they create dummy `T`s using `FromWorld` and then `apply` a `&dyn
Reflect` to it to simulate `FromReflect`.
- However `FromWorld`/`Default` may be difficult/weird/impractical to
implement, while `FromReflect` is easier and also more natural for the
job.
- See also
https://discord.com/channels/691052431525675048/1146022009554337792
## Solution
- Split `from_world` from `ReflectComponent` and `ReflectBundle` into
its own `ReflectFromWorld` struct.
- Replace the requirement on `FromWorld` in `ReflectComponent` and
`ReflectBundle` with `FromReflect`
---
## Changelog
- `ReflectComponent` and `ReflectBundle` no longer offer a `from_world`
method.
- `ReflectComponent` and `ReflectBundle`'s `FromType<T>` implementation
no longer requires `T: FromWorld`, but now requires `FromReflect`.
- `ReflectComponent::insert`, `ReflectComponent::apply_or_insert` and
`ReflectComponent::copy` now take an extra `&TypeRegistry` parameter.
- There is now a new `ReflectFromWorld` struct.
## Migration Guide
- Existing uses of `ReflectComponent::from_world` and
`ReflectBundle::from_world` will have to be changed to
`ReflectFromWorld::from_world`.
- Users of `#[reflect(Component)]` and `#[reflect(Bundle)]` will need to
also implement/derive `FromReflect`.
- Users of `#[reflect(Component)]` and `#[reflect(Bundle)]` may now want
to also add `FromWorld` to the list of reflected traits in case their
`FromReflect` implementation may fail.
- Users of `ReflectComponent` will now need to pass a `&TypeRegistry` to
its `insert`, `apply_or_insert` and `copy` methods.
This pull request re-submits #10057, which was backed out for breaking
macOS, iOS, and Android. I've tested this version on macOS and Android
and on the iOS simulator.
# Objective
This pull request implements *reflection probes*, which generalize
environment maps to allow for multiple environment maps in the same
scene, each of which has an axis-aligned bounding box. This is a
standard feature of physically-based renderers and was inspired by [the
corresponding feature in Blender's Eevee renderer].
## Solution
This is a minimal implementation of reflection probes that allows
artists to define cuboid bounding regions associated with environment
maps. For every view, on every frame, a system builds up a list of the
nearest 4 reflection probes that are within the view's frustum and
supplies that list to the shader. The PBR fragment shader searches
through the list, finds the first containing reflection probe, and uses
it for indirect lighting, falling back to the view's environment map if
none is found. Both forward and deferred renderers are fully supported.
A reflection probe is an entity with a pair of components, *LightProbe*
and *EnvironmentMapLight* (as well as the standard *SpatialBundle*, to
position it in the world). The *LightProbe* component (along with the
*Transform*) defines the bounding region, while the
*EnvironmentMapLight* component specifies the associated diffuse and
specular cubemaps.
A frequent question is "why two components instead of just one?" The
advantages of this setup are:
1. It's readily extensible to other types of light probes, in particular
*irradiance volumes* (also known as ambient cubes or voxel global
illumination), which use the same approach of bounding cuboids. With a
single component that applies to both reflection probes and irradiance
volumes, we can share the logic that implements falloff and blending
between multiple light probes between both of those features.
2. It reduces duplication between the existing *EnvironmentMapLight* and
these new reflection probes. Systems can treat environment maps attached
to cameras the same way they treat environment maps applied to
reflection probes if they wish.
Internally, we gather up all environment maps in the scene and place
them in a cubemap array. At present, this means that all environment
maps must have the same size, mipmap count, and texture format. A
warning is emitted if this restriction is violated. We could potentially
relax this in the future as part of the automatic mipmap generation
work, which could easily do texture format conversion as part of its
preprocessing.
An easy way to generate reflection probe cubemaps is to bake them in
Blender and use the `export-blender-gi` tool that's part of the
[`bevy-baked-gi`] project. This tool takes a `.blend` file containing
baked cubemaps as input and exports cubemap images, pre-filtered with an
embedded fork of the [glTF IBL Sampler], alongside a corresponding
`.scn.ron` file that the scene spawner can use to recreate the
reflection probes.
Note that this is intentionally a minimal implementation, to aid
reviewability. Known issues are:
* Reflection probes are basically unsupported on WebGL 2, because WebGL
2 has no cubemap arrays. (Strictly speaking, you can have precisely one
reflection probe in the scene if you have no other cubemaps anywhere,
but this isn't very useful.)
* Reflection probes have no falloff, so reflections will abruptly change
when objects move from one bounding region to another.
* As mentioned before, all cubemaps in the world of a given type
(diffuse or specular) must have the same size, format, and mipmap count.
Future work includes:
* Blending between multiple reflection probes.
* A falloff/fade-out region so that reflected objects disappear
gradually instead of vanishing all at once.
* Irradiance volumes for voxel-based global illumination. This should
reuse much of the reflection probe logic, as they're both GI techniques
based on cuboid bounding regions.
* Support for WebGL 2, by breaking batches when reflection probes are
used.
These issues notwithstanding, I think it's best to land this with
roughly the current set of functionality, because this patch is useful
as is and adding everything above would make the pull request
significantly larger and harder to review.
---
## Changelog
### Added
* A new *LightProbe* component is available that specifies a bounding
region that an *EnvironmentMapLight* applies to. The combination of a
*LightProbe* and an *EnvironmentMapLight* offers *reflection probe*
functionality similar to that available in other engines.
[the corresponding feature in Blender's Eevee renderer]:
https://docs.blender.org/manual/en/latest/render/eevee/light_probes/reflection_cubemaps.html
[`bevy-baked-gi`]: https://github.com/pcwalton/bevy-baked-gi
[glTF IBL Sampler]: https://github.com/KhronosGroup/glTF-IBL-Sampler
# Objective
When working within `bevy_ecs`, we can't use the `log_once` macros due
to their placement in `bevy_log` - which depends on `bevy_ecs`. All this
create does is migrate those macros to the `bevy_utils` crate, while
still re-exporting them in `bevy_log`.
created to resolve this:
https://github.com/bevyengine/bevy/pull/11417#discussion_r1458100211
---------
Co-authored-by: François <mockersf@gmail.com>
# Objective
After the Gizmos changes, `App::init_gizmos_group` turned into a
important function that for sure mustn't panic. The problem is: the
actual implementation causes a panic if somehow the code is runned
before `GizmoPlugin` was added to the App
- The error occurs here for example:
```rust
fn main() {
App::new()
.init_gizmo_group::<MyGizmoConfig>()
.add_plugins(DefaultPlugins)
.run();
}
#[derive(Default, Reflect, GizmoConfigGroup)]
struct MyGizmoConfig;
```
## Solution
- Instead of panicking when getting `GizmoConfigStore`, insert the store
in `App::init_gizmos_group` if needed
---
## Changelog
### Changed
- Changed App::init_gizmos_group to insert the resource if it don't
exist
### Removed
- Removed explicit init of `GizmoConfigStore`
---------
Co-authored-by: François <mockersf@gmail.com>
# Objective
- Some users want to change the default texture usage of the main camera
but they are currently hardcoded
## Solution
- Add a component that is used to configure the main texture usage field
---
## Changelog
Added `CameraMainTextureUsage`
Added `CameraMainTextureUsage` to `Camera3dBundle` and `Camera2dBundle`
## Migration Guide
Add `main_texture_usages: Default::default()` to your camera bundle.
# Notes
Inspired by: #6815
# Objective
- Tests are manually checking whether derived types implement certain
traits. (Specifically in `bevy_reflect.)
- #11182 introduces
[`static_assertions`](https://docs.rs/static_assertions/) to
automatically check this.
- Simplifies `Reflect` test in #11195.
- Closes#11196.
## Solution
- Add `static_assertions` and replace current tests.
---
I wasn't sure whether to remove the existing test or not. What do you
think?
# Objective
- Add methods to get Change Ticks for a given resource by type or
ComponentId
- Fixes#11390
The `is_resource_id_changed` requested in the Issue already exists, this
adds their request for `get_resource_change_ticks`
## Solution
- Added two methods to get change ticks by Type or ComponentId
# Objective
Closes#10570.
#10946 added bounding volume types and traits, but didn't use them for
anything yet. This PR implements `Bounded2d` and `Bounded3d` for Bevy's
primitive shapes.
## Solution
Implement `Bounded2d` and `Bounded3d` for primitive shapes. This allows
computing AABBs and bounding circles/spheres for them.
For most shapes, there are several ways of implementing bounding
volumes. I took inspiration from [Parry's bounding
volumes](https://github.com/dimforge/parry/tree/master/src/bounding_volume),
[Inigo Quilez](http://iquilezles.org/articles/diskbbox/), and figured
out the rest myself using geometry. I tried to comment all slightly
non-trivial or unclear math to make it understandable.
Parry uses support mapping (finding the farthest point in some direction
for convex shapes) for some AABBs like cones, cylinders, and line
segments. This involves several quat operations and normalizations, so I
opted for the simpler and more efficient geometric approaches shown in
[Quilez's article](http://iquilezles.org/articles/diskbbox/).
Below you can see some of the bounding volumes working in 2D and 3D.
Note that I can't conveniently add these examples yet because they use
primitive shape meshing, which is still WIP.
https://github.com/bevyengine/bevy/assets/57632562/4465cbc6-285b-4c71-b62d-a2b3ee16f8b4https://github.com/bevyengine/bevy/assets/57632562/94b4ac84-a092-46d7-b438-ce2e971496a4
---
## Changelog
- Implemented `Bounded2d`/`Bounded3d` for primitive shapes
- Added `from_point_cloud` method for bounding volumes (used by many
bounding implementations)
- Added `point_cloud_2d/3d_center` and `rotate_vec2` utility functions
- Added `RegularPolygon::vertices` method (used in regular polygon AABB
construction)
- Added `Triangle::circumcenter` method (used in triangle bounding
circle construction)
- Added bounding circle/sphere creation from AABBs and vice versa
## Extra
Do we want to implement `Bounded2d` for some "3D-ish" shapes too? For
example, capsules are sort of dimension-agnostic and useful for 2D, so I
think that would be good to implement. But a cylinder in 2D is just a
rectangle, and a cone is a triangle, so they wouldn't make as much sense
to me. A conical frustum would be an isosceles trapezoid, which could be
useful, but I'm not sure if computing the 2D AABB of a 3D frustum makes
semantic sense.
# Objective
This PR aims to implement multiple configs for gizmos as discussed in
#9187.
## Solution
Configs for the new `GizmoConfigGroup`s are stored in a
`GizmoConfigStore` resource and can be accesses using a type based key
or iterated over. This type based key doubles as a standardized location
where plugin authors can put their own configuration not covered by the
standard `GizmoConfig` struct. For example the `AabbGizmoGroup` has a
default color and toggle to show all AABBs. New configs can be
registered using `app.init_gizmo_group::<T>()` during startup.
When requesting the `Gizmos<T>` system parameter the generic type
determines which config is used. The config structs are available
through the `Gizmos` system parameter allowing for easy access while
drawing your gizmos.
Internally, resources and systems used for rendering (up to an including
the extract system) are generic over the type based key and inserted on
registering a new config.
## Alternatives
The configs could be stored as components on entities with markers which
would make better use of the ECS. I also implemented this approach
([here](https://github.com/jeliag/bevy/tree/gizmo-multiconf-comp)) and
believe that the ergonomic benefits of a central config store outweigh
the decreased use of the ECS.
## Unsafe Code
Implementing system parameter by hand is unsafe but seems to be required
to access the config store once and not on every gizmo draw function
call. This is critical for performance. ~Is there a better way to do
this?~
## Future Work
New gizmos (such as #10038, and ideas from #9400) will require custom
configuration structs. Should there be a new custom config for every
gizmo type, or should we group them together in a common configuration?
(for example `EditorGizmoConfig`, or something more fine-grained)
## Changelog
- Added `GizmoConfigStore` resource and `GizmoConfigGroup` trait
- Added `init_gizmo_group` to `App`
- Added early returns to gizmo drawing increasing performance when
gizmos are disabled
- Changed `GizmoConfig` and aabb gizmos to use new `GizmoConfigStore`
- Changed `Gizmos` system parameter to use type based key to retrieve
config
- Changed resources and systems used for gizmo rendering to be generic
over type based key
- Changed examples (3d_gizmos, 2d_gizmos) to showcase new API
## Migration Guide
- `GizmoConfig` is no longer a resource and has to be accessed through
`GizmoConfigStore` resource. The default config group is
`DefaultGizmoGroup`, but consider using your own custom config group if
applicable.
---------
Co-authored-by: Nicola Papale <nicopap@users.noreply.github.com>
# Objective
This adds events for assets that fail to load along with minor utility
methods to make them useful. This paves the way for users writing their
own error handling and retry systems, plus Bevy including robust retry
handling: #11349.
* Addresses #11288
* Needed for #11349
# Solution
```rust
/// An event emitted when a specific [`Asset`] fails to load.
#[derive(Event, Clone, Debug)]
pub struct AssetLoadFailedEvent<A: Asset> {
pub id: AssetId<A>,
/// The original handle returned when the asset load was requested.
pub handle: Option<Handle<A>>,
/// The asset path that was attempted.
pub path: AssetPath<'static>,
/// Why the asset failed to load.
pub error: AssetLoadError,
}
```
I started implementing `AssetEvent::Failed` like suggested in #11288,
but decided it was better as its own type because:
* I think it makes sense for `AssetEvent` to only refer to assets that
actually exist.
* In order to return `AssetLoadError` in the event (which is useful
information for error handlers that might attempt a retry) we would have
to remove `Copy` from `AssetEvent`.
* There are numerous places in the render app that match against
`AssetEvent`, and I don't think it's worth introducing extra noise about
assets that don't exist.
I also introduced `UntypedAssetLoadErrorEvent`, which is very useful in
places that need to support type flexibility, like an Asset-agnostic
retry plugin.
# Changelog
* **Added:** `AssetLoadFailedEvent<A>`
* **Added**: `UntypedAssetLoadFailedEvent`
* **Added:** `AssetReaderError::Http` for status code information on
HTTP errors. Before this, status codes were only available by parsing
the error message of generic `Io` errors.
* **Added:** `asset_server.get_path_id(path)`. This method simply gets
the asset id for the path. Without this, one was left using
`get_path_handle(path)`, which has the overhead of returning a strong
handle.
* **Fixed**: Made `AssetServer` loads return the same handle for assets
that already exist in a failed state. Now, when you attempt a `load`
that's in a `LoadState::Failed` state, it'll re-use the original asset
id. The advantage of this is that any dependent assets created using the
original handle will "unbreak" if a retry succeeds.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
fix an occasional crash when moving ui root nodes between cameras.
occasionally, updating the TargetCamera of a ui element and then
removing the element causes a crash.
i believe that is because when we assign a child in taffy, the old
parent doesn't remove that child from it's children, so we have:
```
user: create root node N1, camera A
-> layout::set_camera_children(A) :
- create implicit node A1
- assign 1 as child -> taffy.children[A1] = [N1], taffy.parents[1] = A1
user: move root node N1 to camera B
-> layout::set_camera_children(B) :
- create implicit node B1
- assign 1 as child -> taffy.children[A1] = [N1], taffy.children[B1] = [N1], taffy.parents[1] = B1
-> layout::set_camera_children(A) :
- remove implicit node A1 (which still has N1 as a child) ->
-> taffy sets parent[N1] = None ***
-> taffy.children[B1] = [N1], taffy.parents[1] = None
user: remove N1
-> layout::remove_entities(N1)
- since parent[N1] is None, it's not removed from B1 -> taffy.children[B1] = [N1], taffy.parents[1] is removed
-> layout::set_camera_children(B)
- remove implicit node B1
- taffy crash accessing taffy.parents[N1]
```
## Solution
we can work around this by making sure to remove the child from the old
parent if one exists (this pr).
i think a better fix may be for taffy to check in `Taffy::remove` and
only set the child's parent to None if it is currently equal to the node
being removed but i'm not sure if there's an explicit assumption we're
violating here (@nicoburns).
# Objective
- `DynamicUniformBuffer::push` takes an owned `T` but only uses a shared
reference to it
- This in turn requires users of `DynamicUniformBuffer::push` to
potentially unecessarily clone data
## Solution
- Have `DynamicUniformBuffer::push` take a shared reference to `T`
---
## Changelog
- `DynamicUniformBuffer::push` now takes a `&T` instead of `T`
## Migration Guide
- Users of `DynamicUniformBuffer::push` now need to pass references to
`DynamicUniformBuffer::push` (e.g. existing `uniforms.push(value)` will
now become `uniforms.push(&value)`)
