# Objective
- Fixes (partially) #15701.
## Solution
- Use little-endian bytes over native-endian bytes where applicable.
## Testing
- Ran CI.
## Open Questions
- Should we config-gate these for big-endian targets? It looks like
there are [very few
targets](https://doc.rust-lang.org/nightly/rustc/platform-support.html)
that use big-endian.
# Objective
- Closes#15717
## Solution
- Wrap the handle in a new wrapper component: `AnimationGraphHandle`.
## Testing
Searched for all instances of `AnimationGraph` in the examples and
updated and tested those
## Migration Guide
`Handle<AnimationGraph>` is no longer a component. Instead, use the
`AnimationGraphHandle` component which contains a
`Handle<AnimationGraph>`.
# Objective
Fixes#15741
## Solution
- Copied the feature gates of a type to where the type is used.
## Testing
- `cargo check` works now using only the bevy_dev_tools feature
# Objective
- Size is currently hardcoded in the shader which means it will break if
a user uses anything higher than that.
## Solution
- Use a shader_def to define the size
## Testing
Tested with the OIT example
# Objective
The UI text rendering is really slow because it extracts each glyph as a
separate ui node even though all the glyphs in a text section have the
same texture, color and clipping rects.
## Solution
Store the glyphs in a seperate contiguous array, queue one transparent
ui item per text section which has indices into the glyph array.
## Testing
```cargo run --example many_glyphs --release```
Runs at about 22fps on main and 95fps with this PR on my computer.
I'll do some proper comparisons once I work out why tracy 11 is refusing to run.
---------
Co-authored-by: Kristoffer Søholm <k.soeholm@gmail.com>
# Objective
Fixes#15560
Fixes (most of) #15570
Currently a lot of examples (and presumably some user code) depend on
toggling certain render features by adding/removing a single component
to an entity, e.g. `SpotLight` to toggle a light. Because of the
retained render world this no longer works: Extract will add any new
components, but when it is removed the entity persists unchanged in the
render world.
## Solution
Add `SyncComponentPlugin<C: Component>` that registers
`SyncToRenderWorld` as a required component for `C`, and adds a
component hook that will clear all components from the render world
entity when `C` is removed. We add this plugin to
`ExtractComponentPlugin` which fixes most instances of the problem. For
custom extraction logic we can manually add `SyncComponentPlugin` for
that component.
We also rename `WorldSyncPlugin` to `SyncWorldPlugin` so we start a
naming convention like all the `Extract` plugins.
In this PR I also fixed a bunch of breakage related to the retained
render world, stemming from old code that assumed that `Entity` would be
the same in both worlds.
I found that using the `RenderEntity` wrapper instead of `Entity` in
data structures when referring to render world entities makes intent
much clearer, so I propose we make this an official pattern.
## Testing
Run examples like
```
cargo run --features pbr_multi_layer_material_textures --example clearcoat
cargo run --example volumetric_fog
```
and see that they work, and that toggles work correctly. But really we
should test every single example, as we might not even have caught all
the breakage yet.
---
## Migration Guide
The retained render world notes should be updated to explain this edge
case and `SyncComponentPlugin`
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Trashtalk217 <trashtalk217@gmail.com>
# Objective
- `interpolation` crates provides all the curves functions, but some of
them were wrong
- We have a partial solution where some functions comes from the
external crate, some from bevy_math
## Solution
- Move them all to bevy_math
- Remove the dependency on `interpolation`
## Testing
Playing the `easing_functions` example
# Objective
As discussed in #15591, this warning prevents us from storing leaf nodes
without a `Style` component. Because text sections (as distinct
entities) should not be laid out using `taffy`, this warning is
incorrect.
Users may also have other uses for doing this, and this should generally
increase flexibility without posing particularly serious correctness
concerns.
## Solution
- removed warning about non-UI children with UI parents
- improved the warning about UI parents with non-UI parents
- this warning should stay, for now, as it results in a genuine failure
to perform `taffy` layout
- that said, we should be clearer about the cause and potentially
harmful results of this!
## Testing
I inserted an empty entity into the hierarchy in the `button` example as
a leaf node, and it ran with no warnings.
# Objective
Simplify the API surrounding easing curves. Broaden the base of types
that support easing.
## Solution
There is now a single library function, `easing_curve`, which constructs
a unit-parametrized easing curve between two values based on an
`EaseFunction`:
```rust
/// Given a `start` and `end` value, create a curve parametrized over [the unit interval]
/// that connects them, using the given [ease function] to determine the form of the
/// curve in between.
///
/// [the unit interval]: Interval::UNIT
/// [ease function]: EaseFunction
pub fn easing_curve<T: Ease>(start: T, end: T, ease_fn: EaseFunction) -> EasingCurve<T> { //... }
```
As this shows, the type of the output curve is generic only in `T`. In
particular, as long as `T` is `Reflect` (and `FromReflect` etc. — i.e.,
a standard "well-behaved" reflectable type), `EasingCurve<T>` is also
`Reflect`, and there is no special field handling nonsense. Therefore,
`EasingCurve` is the kind of thing that would be able to be easily
changed in an editor. This is made possible by storing the actual
`EaseFunction` on `EasingCurve<T>` instead of indirecting through some
kind of function type (which generally leads to issues with reflection).
The types that can be eased are those that implement a trait `Ease`:
```rust
/// A type whose values can be eased between.
///
/// This requires the construction of an interpolation curve that actually extends
/// beyond the curve segment that connects two values, because an easing curve may
/// extrapolate before the starting value and after the ending value. This is
/// especially common in easing functions that mimic elastic or springlike behavior.
pub trait Ease: Sized {
/// Given `start` and `end` values, produce a curve with [unlimited domain]
/// that:
/// - takes a value equivalent to `start` at `t = 0`
/// - takes a value equivalent to `end` at `t = 1`
/// - has constant speed everywhere, including outside of `[0, 1]`
///
/// [unlimited domain]: Interval::EVERYWHERE
fn interpolating_curve_unbounded(start: &Self, end: &Self) -> impl Curve<Self>;
}
```
(I know, I know, yet *another* interpolation trait. See 'Future
direction'.)
The other existing easing functions from the previous version of this
module have also become new members of `EaseFunction`: `Linear`,
`Steps`, and `Elastic` (which maybe needs a different name). The latter
two are parametrized.
## Testing
Tested using the `easing_functions` example. I also axed the
`cubic_curve` example which was of questionable value and replaced it
with `eased_motion`, which uses this API in the context of animation:
https://github.com/user-attachments/assets/3c802992-6b9b-4b56-aeb1-a47501c29ce2
---
## Future direction
Morally speaking, `Ease` is incredibly similar to `StableInterpolate`.
Probably, we should just merge `StableInterpolate` into `Ease`, and then
make `SmoothNudge` an automatic extension trait of `Ease`. The reason I
didn't do that is that `StableInterpolate` is not implemented for
`VectorSpace` because of concerns about the `Color` types, and I wanted
to avoid controversy. I think that may be a good idea though.
As Alice mentioned before, we should also probably get rid of the
`interpolation` dependency.
The parametrized `Elastic` variant probably also needs some additional
work (e.g. renaming, in/out/in-out variants, etc.) if we want to keep
it.
# Objective
- Closes#15720
## Solution
Wrap the handle in a new wrapper component: `UiMaterialHandle`
It's not possible to match the naming convention of `MeshMaterial3d/2d`
here with the trait already being called `UiMaterial`
Should we consider renaming to `Material3d/2dHandle` and `Mesh3d/2d` to
`Mesh3d/2dHandle`?
- This shouldn't have any merge conflicts with #15591
## Testing
Tested the `ui_material` example
## Migration Guide
Let's defer the migration guide to the required component port. I just
want to yeet the `Component` impl on `Handle` in the meantime :)
# Objective
- Prepare for streaming by storing vertex data per-meshlet, rather than
per-mesh (this means duplicating vertices per-meshlet)
- Compress vertex data to reduce the cost of this
## Solution
The important parts are in from_mesh.rs, the changes to the Meshlet type
in asset.rs, and the changes in meshlet_bindings.wgsl. Everything else
is pretty secondary/boilerplate/straightforward changes.
- Positions are quantized in centimeters with a user-provided power of 2
factor (ideally auto-determined, but that's a TODO for the future),
encoded as an offset relative to the minimum value within the meshlet,
and then stored as a packed list of bits using the minimum number of
bits needed for each vertex position channel for that meshlet
- E.g. quantize positions (lossly, throws away precision that's not
needed leading to using less bits in the bitstream encoding)
- Get the min/max quantized value of each X/Y/Z channel of the quantized
positions within a meshlet
- Encode values relative to the min value of the meshlet. E.g. convert
from [min, max] to [0, max - min]
- The new max value in the meshlet is (max - min), which only takes N
bits, so we only need N bits to store each channel within the meshlet
(lossless)
- We can store the min value and that it takes N bits per channel in the
meshlet metadata, and reconstruct the position from the bitstream
- Normals are octahedral encoded and than snorm2x16 packed and stored as
a single u32.
- Would be better to implement the precise variant of octhedral encoding
for extra precision (no extra decode cost), but decided to keep it
simple for now and leave that as a followup
- Tried doing a quantizing and bitstream encoding scheme like I did for
positions, but struggled to get it smaller. Decided to go with this for
simplicity for now
- UVs are uncompressed and take a full 64bits per vertex which is
expensive
- In the future this should be improved
- Tangents, as of the previous PR, are not explicitly stored and are
instead derived from screen space gradients
- While I'm here, split up MeshletMeshSaverLoader into two separate
types
Other future changes include implementing a smaller encoding of triangle
data (3 u8 indices = 24 bits per triangle currently), and more
disk-oriented compression schemes.
References:
* "A Deep Dive into UE5's Nanite Virtualized Geometry"
https://advances.realtimerendering.com/s2021/Karis_Nanite_SIGGRAPH_Advances_2021_final.pdf#page=128
(also available on youtube)
* "Towards Practical Meshlet Compression"
https://arxiv.org/pdf/2404.06359
* "Vertex quantization in Omniforce Game Engine"
https://daniilvinn.github.io/2024/05/04/omniforce-vertex-quantization.html
## Testing
- Did you test these changes? If so, how?
- Converted the stanford bunny, and rendered it with a debug material
showing normals, and confirmed that it's identical to what's on main.
EDIT: See additional testing in the comments below.
- Are there any parts that need more testing?
- Could use some more size comparisons on various meshes, and testing
different quantization factors. Not sure if 4 is a good default. EDIT:
See additional testing in the comments below.
- Also did not test runtime performance of the shaders. EDIT: See
additional testing in the comments below.
- How can other people (reviewers) test your changes? Is there anything
specific they need to know?
- Use my unholy script, replacing the meshlet example
https://paste.rs/7xQHk.rs (must make MeshletMesh fields pub instead of
pub crate, must add lz4_flex as a dev-dependency) (must compile with
meshlet and meshlet_processor features, mesh must have only positions,
normals, and UVs, no vertex colors or tangents)
---
## Migration Guide
- TBD by JMS55 at the end of the release
# Objective
The `new` constructors for our ray types currently take a `Vec2`/`Vec3`
instead of a `Dir2`/`Dir3`. This is confusing and footgunny for several
reasons.
- Which one of these is the direction? You can't see it from the type.
```rust
let ray = Ray2d::new(Vec2::X, Vec2::X);
```
- Many engines allow unnormalized rays, and this can affect ray cast
results by scaling the time of impact. However, in Bevy, rays are
*always* normalized despite what the input argument in this case
implies, and ray cast results are *not* scaled.
```rust
// The true ray direction is still normalized, unlike what you'd expect.
let ray = Ray2d::new(Vec2::X, Vec2::new(5.0, 0.0, 0.0)));
```
These cases are what the direction types are intended for, and we should
use them as such.
## Solution
Use `Dir2`/`Dir3` in the constructors.
```rust
let ray = Ray2d::new(Vec2::X, Dir2::X);
```
We *could* also use `impl TryInto<DirN>`, which would allow both vectors
and direction types, and then panic if the input is not normalized. This
could be fine for ergonomics in some cases, but especially for rays, I
think it's better to take an explicit direction type here.
---
## Migration Guide
`Ray2d::new` and `Ray3d::new` now take a `Dir2` and `Dir3` instead of
`Vec2` and `Vec3` respectively for the ray direction.
# Objective
Expose the `winit` functions
[drag_window](https://docs.rs/winit/latest/winit/window/struct.Window.html#method.drag_window)
and
[resize_window](https://docs.rs/winit/latest/winit/window/struct.Window.html#method.drag_resize_window).
Which allows implementing move & resize for windows without decorations.
## Solution
Add the functions `start_drag_move` and `start_drag_resize` to
`bevy_window::Window`, which are then assigned to fields in
`InternalWindowState`, and propagated to `winit` in the
`changed_windows` system.
## Testing
I've tested that both functions works on x11 and wayland. Not sure if
someone needs to test on windows/mac?
---
## Showcase
[Screencast from 2024-10-06 11-49-58
(trimmed).webm](https://github.com/user-attachments/assets/1cdee7b1-22bd-41d3-8a0a-6872a6ebf62c)
(The flickering in the video is some issue with resizing without
decorations on x11)
<details>
<summary>Click to view showcase</summary>
Not the same code used in the video, but simple way to test moving a
window without decorations.
```rust
use bevy::prelude::*;
fn main() {
App::new()
.add_plugins(DefaultPlugins.set(WindowPlugin {
primary_window: Some(Window {
decorations: false,
..default()
}),
..default()
}))
.add_systems(Update, move_windows)
.run();
}
fn move_windows(mut windows: Query<&mut Window>, input: Res<ButtonInput<MouseButton>>) {
if input.pressed(MouseButton::Left) {
for mut window in windows.iter_mut() {
window.start_drag_move();
}
}
}
```
</details>
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
UI box shadow support
Adds a new component `BoxShadow`:
```rust
pub struct BoxShadow {
/// The shadow's color
pub color: Color,
/// Horizontal offset
pub x_offset: Val,
/// Vertical offset
pub y_offset: Val,
/// Horizontal difference in size from the occluding uninode
pub spread_radius: Val,
/// Blurriness of the shadow
pub blur_radius: Val,
}
```
To use `BoxShadow`, add the component to any Bevy UI node and a shadow
will be drawn beneath that node.
Also adds a resource `BoxShadowSamples` that can be used to adjust the
shadow quality.
#### Notes
* I'm not super happy with the field names. Maybe we need a `struct Size
{ width: Val, height: Val }` type or something.
* The shader isn't very optimised but I don't see that it's too
important for now as the number of shadows being rendered is not going
to be massive most of the time. I think it's more important to get the
API and geometry correct with this PR.
* I didn't implement an inset property, it's not essential and can
easily be added in a follow up.
* Shadows are only rendered for uinodes, not for images or text.
* Batching isn't supported, it would need out-of-the-scope-of-this-pr
changes to the way the UI handles z-ordering for it to be effective.
# Showcase
```cargo run --example box_shadow -- --samples 4```
<img width="391" alt="br" src="https://github.com/user-attachments/assets/4e8add96-dc93-46e0-9e35-d995eb0943ad">
```cargo run --example box_shadow -- --samples 10```
<img width="391" alt="s10"
src="https://github.com/user-attachments/assets/ecb384c9-4012-4cd6-9dea-5180904bf28e">
## Objective
Add a way to stream BRP requests when the data changes.
## Solution
#### BRP Side (reusable for other transports)
Add a new method handler type that returns a optional value. This
handler is run in update and if a value is returned it will be sent on
the message channel. Custom watching handlers can be added with
`RemotePlugin::with_watching_method`.
#### HTTP Side
If a request comes in with `+watch` in the method, it will respond with
`text/event-stream` rather than a single response.
## Testing
I tested with the podman HTTP client. This client has good support for
SSE's if you want to test it too.
## Parts I want some opinions on
- For separating watching methods I chose to add a `+watch` suffix to
the end kind of like `content-type` headers. A get would be
`bevy/get+watch`.
- Should watching methods send an initial response with everything or
only respond when a change happens? Currently the later is what happens.
## Future work
- The `bevy/query` method would also benefit from this but that
condition will be quite complex so I will leave that to later.
---------
Co-authored-by: Zachary Harrold <zac@harrold.com.au>
# Objective
Several of our APIs (namely gizmos and bounding) use isometries on
current Bevy main. This is nicer than separate properties in a lot of
cases, but users have still expressed usability concerns.
One problem is that in a lot of cases, you only care about e.g.
translation, so you end up with this:
```rust
gizmos.cross_2d(
Isometry2d::from_translation(Vec2::new(-160.0, 120.0)),
12.0,
FUCHSIA,
);
```
The isometry adds quite a lot of length and verbosity, and isn't really
that relevant since only the translation is important here.
It would be nice if you could use the translation directly, and only
supply an isometry if both translation and rotation are needed. This
would make the following possible:
```rust
gizmos.cross_2d(Vec2::new(-160.0, 120.0), 12.0, FUCHSIA);
```
removing a lot of verbosity.
## Solution
Implement `From<Vec2>` and `From<Rot2>` for `Isometry2d`, and
`From<Vec3>`, `From<Vec3A>`, and `From<Quat>` for `Isometry3d`. These
are lossless conversions that fit the semantics of `From`.
This makes the proposed API possible! The methods must now simply take
an `impl Into<IsometryNd>`, and this works:
```rust
gizmos.cross_2d(Vec2::new(-160.0, 120.0), 12.0, FUCHSIA);
```
# Objective
- As discussed on
[Discord](https://discord.com/channels/691052431525675048/1203087353850364004/1285300659746246849),
implement a `ConvexPolygon` 2D math primitive and associated mesh
builder.
- The original goal was to have a mesh builder for the simplest (i.e.
convex) polygons.
## Solution
- The `ConvexPolygon` is created from its vertices.
- The convexity of the polygon is checked when created via `new()` by
verifying that the winding order of all the triangles formed with
adjacent vertices is the same.
- The `ConvexPolygonMeshBuilder` uses an anchor vertex and goes through
every adjacent pair of vertices in the polygon to form triangles that
fill up the polygon.
## Testing
- Tested locally with my own simple `ConvexPolygonMeshBuilder` usage.
The previous fixes were breaking pretty much everything on main due to
naga-oil complaining about the OIT shader not being loaded, since
apparently webgl is a default feature. This fix is a bit messier, but
properly warns the user and is probably what we should have gone for in
the first place.
The gamepads-as-entities change caused several regressions. This patch
fixes each of them:
1. This PR introduces two new fields on `GamepadInfo`: `vendor_id`, and
`product_id`, as well as associated methods. These fields are simply
mirrored from the `gilrs` library.
2. That PR removed the methods that allowed iterating over all pressed
and released buttons, as well as the method that allowed iterating over
the axis values. (It was still technically possible to do so by using
reflection to access the private fields of `Gamepad`.)
3. The `Gamepad` component wasn't marked reflectable. This PR fixes that
problem.
These changes allowed me to forward port `leafwing-input-manager`.
# Objective
- Alpha blending can easily fail in many situations and requires sorting
on the cpu
## Solution
- Implement order independent transparency (OIT) as an alternative to
alpha blending
- The implementation uses 2 passes
- The first pass records all the fragments colors and position to a
buffer that is the size of N layers * the render target resolution.
- The second pass sorts the fragments, blends them and draws them to the
screen. It also currently does manual depth testing because early-z
fails in too many cases in the first pass.
## Testing
- We've been using this implementation at foresight in production for
many months now and we haven't had any issues related to OIT.
---
## Showcase
## Future work
- Add an example showing how to use OIT for a custom material
- Next step would be to implement a per-pixel linked list to reduce
memory use
- I'd also like to investigate using a BinnedRenderPhase instead of a
SortedRenderPhase. If it works, it would make the transparent pass
significantly faster.
---------
Co-authored-by: Kristoffer Søholm <k.soeholm@gmail.com>
Co-authored-by: JMS55 <47158642+JMS55@users.noreply.github.com>
Co-authored-by: Charlotte McElwain <charlotte.c.mcelwain@gmail.com>
# Objective
- fix https://github.com/bevyengine/bevy/issues/15623
## Solution
- Checking field length of tuple struct before ser/der
## Testing
- CI should pass
## Migration Guide
- Reflection now will serialize and deserialize tuple struct with single
field as newtype struct. Consider this code.
```rs
#[derive(Reflect, Serialize)]
struct Test(usize);
let reflect = Test(3);
let serializer = TypedReflectSerializer::new(reflect.as_partial_reflect(), ®istry);
return serde_json::to_string(&serializer)
```
Old behavior will return `["3"]`. New behavior will return `"3"`. If you
were relying on old behavior you need to update your logic. Especially
with `serde_json`. `ron` doesn't affect from this.
# Objective
Allow curve adaptors to be reliably `Reflect` even if the curves they
hold are not `FromReflect`. This allows them, for example, to be used in
`bevy_animation`. I previously addressed this with the functional
adaptors, but I forgot to address this in the case of fields that hold
other curves and not arbitrary functions.
## Solution
Do the following on every curve adaptor that holds another curve:
```rust
// old:
#[derive(Reflect)]
```
```rust
// new:
#[derive(Reflect, FromReflect)]
#[reflect(from_reflect = false)]
```
This looks inane, but it's necessary because the default
`#[derive(Reflect)]` macro places `FromReflect` bounds on everything. To
avoid this, we opt out of deriving `FromReflect` with that macro by
adding `#[reflect(from_reflect = false)]`, then separately derive
`FromReflect`. (Of course, the latter still has the `FromReflect`
bounds, which is fine.)
# Objective
- Rename `Pickable` to `PickingBehavior` to counter the easily-made
assumption that the component is required. It is optional
- Fix and clarify documentation
- The docs in `crates/bevy_ui/src/picking_backend.rs` were incorrect
about the necessity of `Pickable`
- Plus two minor code quality changes in this commit
(7c2e75f48d)
Closes#15632
# Objective
Bevy supports feature gates for each format it supports, but several
formats that it loads via the `image` crate do not have feature gates.
Additionally, the QOI format is supported by the `image` crate and
wasn't available at all. This fixes that.
## Solution
The following feature gates are added:
* `avif`
* `ff` (Farbfeld)
* `gif`
* `ico`
* `qoi`
* `tiff`
None of these formats are enabled by default, despite the fact that all
these formats appeared to be enabled by default before. Since
`default-features` was disabled for the `image` crate, it's likely that
using any of these formats would have errored by default before this
change, although this probably needs additional testing.
## Testing
The changes seemed minimal enough that a compile test would be
sufficient.
## Migration guide
Image formats that previously weren't feature-gated are now
feature-gated, meaning they will have to be enabled if you use them:
* `avif`
* `ff` (Farbfeld)
* `gif`
* `ico`
* `tiff`
Additionally, the `qoi` feature has been added to support loading QOI
format images.
Previously, these formats appeared in the enum by default, but weren't
actually enabled via the `image` crate, potentially resulting in weird
bugs. Now, you should be able to add these features to your projects to
support them properly.
Currently, it's possible for the `collect_meshes_for_gpu_building`
system to run after `set_mesh_motion_vector_flags`. This will cause
those motion vector flags to be overwritten, which will cause the shader
to ignore the motion vectors for skinned meshes, which will cause
graphical artifacts.
This patch corrects the issue by forcing `set_mesh_motion_vector_flags`
to run after `collect_meshes_for_gpu_building`.
# Objective
The current `QueryData` derive panics when it encounters an error.
Additionally, it doesn't provide the clearest error message:
```rust
#[derive(QueryData)]
#[query_data(mut)]
struct Foo {
// ...
}
```
```
error: proc-macro derive panicked
--> src/foo.rs:16:10
|
16 | #[derive(QueryData)]
| ^^^^^^^^^
|
= help: message: Invalid `query_data` attribute format
```
## Solution
Updated the derive logic to not panic and gave a bit more detail in the
error message.
This is makes the error message just a bit clearer and maintains the
correct span:
```
error: invalid attribute, expected `mutable` or `derive`
--> src/foo.rs:17:14
|
17 | #[query_data(mut)]
| ^^^
```
## Testing
You can test locally by running the following in
`crates/bevy_ecs/compile_fail`:
```
cargo test --target-dir ../../../target
```
# Objective
Migrate `bevy_picking` to the required components API
## Solution
- Made `PointerId` require `PointerLocation`, `PointerPress`, and
`PointerInteraction`
- Removed `PointerBundle`
- Removed all engine uses of `PointerBundle`
- Added convenience constructor `PointerLocation::new(location:
Location)`
## Testing
- ran unit tests
- ran `sprite_picking` example, everything seemed fine.
## Migration Guide
This API hasn't shipped yet, so I didn't bother with a deprecation.
However, for any crates tracking main the changes are as follows:
Previous api:
```rs
commands.insert(PointerBundle::new(PointerId::Mouse));
commands.insert(PointerBundle::new(PointerId::Mouse).with_location(location));
```
New api:
```rs
commands.insert(PointerId::Mouse);
commands.insert((PointerId::Mouse, PointerLocation::new(location)));
```
# Objective
After merging retained rendering world #15320, we now have a good way of
creating a link between worlds (*HIYAA intensifies*). This means that
`get_or_spawn` is no longer necessary for that function. Entity should
be opaque as the warning above `get_or_spawn` says. This is also part of
#15459.
I'm deprecating `get_or_spawn_batch` in a different PR in order to keep
the PR small in size.
## Solution
Deprecate `get_or_spawn` and replace it with `get_entity` in most
contexts. If it's possible to query `&RenderEntity`, then the entity is
synced and `render_entity.id()` is initialized in the render world.
## Migration Guide
If you are given an `Entity` and you want to do something with it, use
`Commands.entity(...)` or `World.entity(...)`. If instead you want to
spawn something use `Commands.spawn(...)` or `World.spawn(...)`. If you
are not sure if an entity exists, you can always use `get_entity` and
match on the `Option<...>` that is returned.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Followup for #14788
- Support most usual ease function
## Solution
- Use the crate
[`interpolation`](https://docs.rs/interpolation/0.3.0/interpolation/trait.Ease.html)
which has them all
- it's already used by bevy_easings, bevy_tweening, be_tween,
bevy_tweening_captured, bevy_enoki, kayak_ui in the Bevy ecosystem for
various easing/tweening/interpolation
# Objective
- Working with hierarchies in Bevy is far too tedious due to a lack of
helper functions.
- This is the first half of #15609.
## Solution
Extend
[`HierarchyQueryExt`](https://docs.rs/bevy/latest/bevy/hierarchy/trait.HierarchyQueryExt)
with the following methods:
- `parent`
- `children`
- `root_parent`
- `iter_leaves`
- `iter_siblings`
- `iter_descendants_depth_first`
I've opted to make both `iter_leaves` and `iter_siblings` collect the
list of matching Entities for now, rather that operate by reference like
the existing `iter_descendants`. This was simpler, and in the case of
`iter_siblings` especially, the number of matching entities is likely to
be much smaller.
I've kept the generics in the type signature however, so we can go back
and optimize that freely without a breaking change whenever we want.
## Testing
I've added some basic testing, but they're currently failing. If you'd
like to help, I'd welcome suggestions or a PR to my PR over the weekend
<3
---------
Co-authored-by: Viktor Gustavsson <villor94@gmail.com>
Co-authored-by: poopy <gonesbird@gmail.com>
Co-authored-by: Christian Hughes <9044780+ItsDoot@users.noreply.github.com>
# Objective
Following the pattern established in #15593, we can reduce the API
surface of `World` by providing a single function to grab both a
singular entity reference, or multiple entity references.
## Solution
The following functions can now also take multiple entity IDs and will
return multiple entity references back:
- `World::entity`
- `World::get_entity`
- `World::entity_mut`
- `World::get_entity_mut`
- `DeferredWorld::entity_mut`
- `DeferredWorld::get_entity_mut`
If you pass in X, you receive Y:
- give a single `Entity`, receive a single `EntityRef`/`EntityWorldMut`
(matches current behavior)
- give a `[Entity; N]`/`&[Entity; N]` (array), receive an equally-sized
`[EntityRef; N]`/`[EntityMut; N]`
- give a `&[Entity]` (slice), receive a
`Vec<EntityRef>`/`Vec<EntityMut>`
- give a `&EntityHashSet`, receive a
`EntityHashMap<EntityRef>`/`EntityHashMap<EntityMut>`
Note that `EntityWorldMut` is only returned in the single-entity case,
because having multiple at the same time would lead to UB. Also,
`DeferredWorld` receives an `EntityMut` in the single-entity case
because it does not allow structural access.
## Testing
- Added doc-tests on `World::entity`, `World::entity_mut`, and
`DeferredWorld::entity_mut`
- Added tests for aliased mutability and entity existence
---
## Showcase
<details>
<summary>Click to view showcase</summary>
The APIs for fetching `EntityRef`s and `EntityMut`s from the `World`
have been unified.
```rust
// This code will be referred to by subsequent code blocks.
let world = World::new();
let e1 = world.spawn_empty().id();
let e2 = world.spawn_empty().id();
let e3 = world.spawn_empty().id();
```
Querying for a single entity remains mostly the same:
```rust
// 0.14
let eref: EntityRef = world.entity(e1);
let emut: EntityWorldMut = world.entity_mut(e1);
let eref: Option<EntityRef> = world.get_entity(e1);
let emut: Option<EntityWorldMut> = world.get_entity_mut(e1);
// 0.15
let eref: EntityRef = world.entity(e1);
let emut: EntityWorldMut = world.entity_mut(e1);
let eref: Result<EntityRef, Entity> = world.get_entity(e1);
let emut: Result<EntityWorldMut, Entity> = world.get_entity_mut(e1);
```
Querying for multiple entities with an array has changed:
```rust
// 0.14
let erefs: [EntityRef; 2] = world.many_entities([e1, e2]);
let emuts: [EntityMut; 2] = world.many_entities_mut([e1, e2]);
let erefs: Result<[EntityRef; 2], Entity> = world.get_many_entities([e1, e2]);
let emuts: Result<[EntityMut; 2], QueryEntityError> = world.get_many_entities_mut([e1, e2]);
// 0.15
let erefs: [EntityRef; 2] = world.entity([e1, e2]);
let emuts: [EntityMut; 2] = world.entity_mut([e1, e2]);
let erefs: Result<[EntityRef; 2], Entity> = world.get_entity([e1, e2]);
let emuts: Result<[EntityMut; 2], EntityFetchError> = world.get_entity_mut([e1, e2]);
```
Querying for multiple entities with a slice has changed:
```rust
let ids = vec![e1, e2, e3]);
// 0.14
let erefs: Result<Vec<EntityRef>, Entity> = world.get_many_entities_dynamic(&ids[..]);
let emuts: Result<Vec<EntityMut>, QueryEntityError> = world.get_many_entities_dynamic_mut(&ids[..]);
// 0.15
let erefs: Result<Vec<EntityRef>, Entity> = world.get_entity(&ids[..]);
let emuts: Result<Vec<EntityMut>, EntityFetchError> = world.get_entity_mut(&ids[..]);
let erefs: Vec<EntityRef> = world.entity(&ids[..]); // Newly possible!
let emuts: Vec<EntityMut> = world.entity_mut(&ids[..]); // Newly possible!
```
Querying for multiple entities with an `EntityHashSet` has changed:
```rust
let set = EntityHashSet::from_iter([e1, e2, e3]);
// 0.14
let emuts: Result<Vec<EntityMut>, QueryEntityError> = world.get_many_entities_from_set_mut(&set);
// 0.15
let emuts: Result<EntityHashMap<EntityMut>, EntityFetchError> = world.get_entity_mut(&set);
let erefs: Result<EntityHashMap<EntityRef>, EntityFetchError> = world.get_entity(&set); // Newly possible!
let emuts: EntityHashMap<EntityMut> = world.entity_mut(&set); // Newly possible!
let erefs: EntityHashMap<EntityRef> = world.entity(&set); // Newly possible!
```
</details>
## Migration Guide
- `World::get_entity` now returns `Result<_, Entity>` instead of
`Option<_>`.
- Use `world.get_entity(..).ok()` to return to the previous behavior.
- `World::get_entity_mut` and `DeferredWorld::get_entity_mut` now return
`Result<_, EntityFetchError>` instead of `Option<_>`.
- Use `world.get_entity_mut(..).ok()` to return to the previous
behavior.
- Type inference for `World::entity`, `World::entity_mut`,
`World::get_entity`, `World::get_entity_mut`,
`DeferredWorld::entity_mut`, and `DeferredWorld::get_entity_mut` has
changed, and might now require the input argument's type to be
explicitly written when inside closures.
- The following functions have been deprecated, and should be replaced
as such:
- `World::many_entities` -> `World::entity::<[Entity; N]>`
- `World::many_entities_mut` -> `World::entity_mut::<[Entity; N]>`
- `World::get_many_entities` -> `World::get_entity::<[Entity; N]>`
- `World::get_many_entities_dynamic` -> `World::get_entity::<&[Entity]>`
- `World::get_many_entities_mut` -> `World::get_entity_mut::<[Entity;
N]>`
- The equivalent return type has changed from `Result<_,
QueryEntityError>` to `Result<_, EntityFetchError>`
- `World::get_many_entities_dynamic_mut` ->
`World::get_entity_mut::<&[Entity]>1
- The equivalent return type has changed from `Result<_,
QueryEntityError>` to `Result<_, EntityFetchError>`
- `World::get_many_entities_from_set_mut` ->
`World::get_entity_mut::<&EntityHashSet>`
- The equivalent return type has changed from `Result<Vec<EntityMut>,
QueryEntityError>` to `Result<EntityHashMap<EntityMut>,
EntityFetchError>`. If necessary, you can still convert the
`EntityHashMap` into a `Vec`.
# Objective
If you want to draw / generate images from the CPU, such as:
- to create procedurally-generated assets
- for games whose artstyle is best implemented by poking pixels directly
from the CPU, instead of using shaders
It is currently very unergonomic to do in Bevy, because you have to deal
with the raw bytes inside `image.data`, take care of the pixel format,
etc.
## Solution
This PR adds some helper methods to `Image` for pixel manipulation.
These methods allow you to use Bevy's user-friendly `Color` struct to
read and write the colors of pixels, at arbitrary coordinates (specified
as `UVec3` to support any texture dimension). They handle
encoding/decoding to the `Image`s `TextureFormat`, incl. any sRGB
conversion.
While we are at it, also add methods to help with direct access to the
raw bytes. It is now easy to compute the offset where the bytes of a
specific pixel coordinate are found, or to just get a Rust slice to
access them.
Caveat: `Color` roundtrips are obviously going to be lossy for non-float
`TextureFormat`s. Using `set_color_at` followed by `get_color_at` will
return a different value, due to the data conversions involved (such as
`f32` -> `u8` -> `f32` for the common `Rgba8UnormSrgb` texture format).
Be careful when comparing colors (such as checking for a color you wrote
before)!
Also adding a new example: `cpu_draw` (under `2d`), to showcase these
new APIs.
---
## Changelog
### Added
- `Image` APIs for easy access to the colors of specific pixels.
---------
Co-authored-by: Pascal Hertleif <killercup@gmail.com>
Co-authored-by: François <mockersf@gmail.com>
Co-authored-by: ltdk <usr@ltdk.xyz>
Updates the requirements on
[sysinfo](https://github.com/GuillaumeGomez/sysinfo) to permit the
latest version.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/GuillaumeGomez/sysinfo/blob/master/CHANGELOG.md">sysinfo's
changelog</a>.</em></p>
<blockquote>
<h1>0.32.0</h1>
<ul>
<li>Add new <code>Disk::is_read_only</code> API.</li>
<li>Add new <code>remove_dead_processes</code> argument to
<code>System::refresh_processes</code> and
<code>System::refresh_processes_specifics</code>.</li>
<li>macOS: Fix memory leak in disk refresh.</li>
</ul>
<h1>0.31.4</h1>
<ul>
<li>macOS: Force memory cleanup in disk list retrieval.</li>
</ul>
<h1>0.31.3</h1>
<ul>
<li>Raspberry Pi: Fix temperature retrieval.</li>
</ul>
<h1>0.31.2</h1>
<ul>
<li>Remove <code>bstr</code> dependency (needed for rustc
development).</li>
</ul>
<h1>0.31.1</h1>
<ul>
<li>Downgrade version of <code>memchr</code> (needed for rustc
development).</li>
</ul>
<h1>0.31.0</h1>
<ul>
<li>Split crate in features to only enable what you need.</li>
<li>Remove <code>System::refresh_process</code>,
<code>System::refresh_process_specifics</code> and
<code>System::refresh_pids</code>
methods.</li>
<li>Add new argument of type <code>ProcessesToUpdate</code> to
<code>System::refresh_processes</code> and
<code>System::refresh_processes_specifics</code> methods.</li>
<li>Add new <code>NetworkData::ip_networks</code> method.</li>
<li>Add new <code>System::refresh_cpu_list</code> method.</li>
<li>Global CPU now only contains CPU usage.</li>
<li>Rename <code>TermalSensorType</code> to
<code>ThermalSensorType</code>.</li>
<li>Process names is now an <code>OsString</code>.</li>
<li>Remove <code>System::global_cpu_info</code>.</li>
<li>Add <code>System::global_cpu_usage</code>.</li>
<li>macOS: Fix invalid CPU computation when single processes are
refreshed one after the other.</li>
<li>Windows: Fix virtual memory computation.</li>
<li>Windows: Fix WoW64 parent process refresh.</li>
<li>Linux: Retrieve RSS (Resident Set Size) memory for cgroups.</li>
</ul>
<h1>0.30.13</h1>
<ul>
<li>macOS: Fix segfault when calling
<code>Components::refresh_list</code> multiple times.</li>
<li>Windows: Fix CPU arch retrieval.</li>
</ul>
<h1>0.30.12</h1>
<ul>
<li>FreeBSD: Fix network interfaces retrieval (one was always
missing).</li>
</ul>
<h1>0.30.11</h1>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="e022ae4fd1"><code>e022ae4</code></a>
Merge pull request <a
href="https://redirect.github.com/GuillaumeGomez/sysinfo/issues/1354">#1354</a>
from GuillaumeGomez/update</li>
<li><a
href="0c5ca6af60"><code>0c5ca6a</code></a>
Update migration guide for 0.32</li>
<li><a
href="9f14cba660"><code>9f14cba</code></a>
Update crate version to 0.32.0</li>
<li><a
href="eb7f147b27"><code>eb7f147</code></a>
Update CHANGELOG for 0.32.0</li>
<li><a
href="9c86e253dd"><code>9c86e25</code></a>
Fix new clippy lints</li>
<li><a
href="2fb2903272"><code>2fb2903</code></a>
Merge pull request <a
href="https://redirect.github.com/GuillaumeGomez/sysinfo/issues/1353">#1353</a>
from GuillaumeGomez/rm-dead-processes</li>
<li><a
href="7452b8d828"><code>7452b8d</code></a>
Update <code>System::refresh_processes</code> API to give control over
when to remove de...</li>
<li><a
href="6f1d382276"><code>6f1d382</code></a>
Merge pull request <a
href="https://redirect.github.com/GuillaumeGomez/sysinfo/issues/1348">#1348</a>
from kevinbaker/master</li>
<li><a
href="6d5ea97ade"><code>6d5ea97</code></a>
add dependency on windows SystemServices for disk</li>
<li><a
href="1c87f50f1c"><code>1c87f50</code></a>
win: add correct location of FILE_READ_ONLY_VOLUME, correct call</li>
<li>Additional commits viewable in <a
href="https://github.com/GuillaumeGomez/sysinfo/compare/v0.31.0...v0.32.0">compare
view</a></li>
</ul>
</details>
<br />
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Objective
Fix a couple of substantial errors found during the development of
#15665:
- `AnimationCurveEvaluator::add` was secretly unreachable. In other
words, additive blending never actually occurred.
- Weights from the animation graph nodes were ignored, and only
`ActiveAnimation`'s weights were used.
## Solution
Made additive blending reachable and included the graph node weight in
the weight of the stack elements appended in the curve application loop
of `animate_targets`.
## Testing
Tested on existing examples and on the new example added in #15665.
# Objective
I completely forgot that animation events are triggered in two separate
systems (sorry). The issue ~~fixed~~ by #15677, can still happen if the
animation event is not targeting a specific bone.
## Solution
_Realy_ don't trigger animation events for paused animations.
# Objective
Pausing the `animated_fox` example perfectly as one of the feet hits the
ground causes the event to be triggered every frame.
Context: #15538
## Solution
Don't trigger animation events if the animation is paused.
## Testing
Ran the example, I no longer see the issue.
# Objective
- `bevy_render` should not depend on `bevy_winit`
- Fixes#15565
## Solution
- `bevy_render` no longer depends on `bevy_winit`
- The following is behind the `custom_cursor` feature
- Move custom cursor code from `bevy_render` to `bevy_winit` behind the
`custom_cursor` feature
- `bevy_winit` now depends on `bevy_render` (for `Image` and
`TextureFormat`)
- `bevy_winit` now depends on `bevy_asset` (for `Assets`, `Handle` and
`AssetId`)
- `bevy_winit` now depends on `bytemuck` (already in tree)
- Custom cursor code in `bevy_winit` reworked to use `AssetId` (other
than that it is taken over 1:1)
- Rework `bevy_winit` custom cursor interface visibility now that the
logic is all contained in `bevy_winit`
## Testing
- I ran the screenshot and window_settings examples
- Tested on linux wayland so far
---
## Migration Guide
`CursorIcon` and `CustomCursor` previously provided by
`bevy::render::view::cursor` is now available from `bevy::winit`.
A new feature `custom_cursor` enables this functionality (default
feature).
# Objective
- bevy_render is gargantuan
## Solution
- Split out bevy_mesh
## Testing
- Ran some examples, everything looks fine
## Migration Guide
`bevy_render::mesh::morph::inherit_weights` is now
`bevy_render::mesh::inherit_weights`
if you were using `Mesh::compute_aabb`, you will need to `use
bevy_render::mesh::MeshAabb;` now
---------
Co-authored-by: Joona Aalto <jondolf.dev@gmail.com>
# Objective
- fulfill the needs presented in this issue, which requires the ability
to set custom HTTP headers for responses in the Bevy Remote Protocol
server. #15551
## Solution
- Created a `Headers` struct to store custom HTTP headers as key-value
pairs.
- Added a `headers` field to the `RemoteHttpPlugin` struct.
- Implemented a `with_headers` method in `RemoteHttpPlugin` to allow
users to set custom headers.
- Passed the headers into the processing chain.
## Testing
- I added cors_headers in example/remote/server.rs and tested it with a
static html
[file](https://github.com/spacemen0/bevy/blob/test_file/test.html)
---
# Objective
Add support for events that can be triggered from animation clips. This
is useful when you need something to happen at a specific time in an
animation. For example, playing a sound every time a characters feet
hits the ground when walking.
Closes#15494
## Solution
Added a new field to `AnimationClip`: `events`, which contains a list of
`AnimationEvent`s. These are automatically triggered in
`animate_targets` and `trigger_untargeted_animation_events`.
## Testing
Added a couple of tests and example (`animation_events.rs`) to make sure
events are triggered when expected.
---
## Showcase
`Events` need to also implement `AnimationEvent` and `Reflect` to be
used with animations.
```rust
#[derive(Event, AnimationEvent, Reflect)]
struct SomeEvent;
```
Events can be added to an `AnimationClip` by specifying a time and
event.
```rust
// trigger an event after 1.0 second
animation_clip.add_event(1.0, SomeEvent);
```
And optionally, providing a target id.
```rust
let id = AnimationTargetId::from_iter(["shoulder", "arm", "hand"]);
animation_clip.add_event_to_target(id, 1.0, HandEvent);
```
I modified the `animated_fox` example to show off the feature.
---------
Co-authored-by: Matty <weatherleymatthew@gmail.com>
Co-authored-by: Chris Biscardi <chris@christopherbiscardi.com>
Co-authored-by: François Mockers <francois.mockers@vleue.com>
# Objective
I noticed a weird break in a doc comment, I assume it must be a typo.
## Solution
Put the missing doc comment in there.
## Testing
It looks better in my IDE now
# Objective
Fixes#13832
## Solution
Additively blend quaternions like this:
```rust
rotation = Quat::slerp(Quat::IDENTITY, incoming_rotation, weight) * rotation;
```
## Testing
Ran `animation_masks`, which behaves the same as before. (In the context
of an animation being blended only onto the base pose, there is no
difference.)
We should create some examples that actually exercise more of the
capabilities of the `AnimationGraph` so that issues like this can become
more visible in general. (On the other hand, I'm quite certain this was
wrong before.)
## Migration Guide
This PR changes the implementation of `Quat: Animatable`, which was not
used internally by Bevy prior to this release version. If you relied on
the old behavior of additive quaternion blending in manual applications,
that code will have to be updated, as the old behavior was incorrect.
# Objective
Yet another PR for migrating stuff to required components. This time,
cameras!
## Solution
As per the [selected
proposal](https://hackmd.io/tsYID4CGRiWxzsgawzxG_g#Combined-Proposal-1-Selected),
deprecate `Camera2dBundle` and `Camera3dBundle` in favor of `Camera2d`
and `Camera3d`.
Adding a `Camera` without `Camera2d` or `Camera3d` now logs a warning,
as suggested by Cart [on
Discord](https://discord.com/channels/691052431525675048/1264881140007702558/1291506402832945273).
I would personally like cameras to work a bit differently and be split
into a few more components, to avoid some footguns and confusing
semantics, but that is more controversial, and shouldn't block this core
migration.
## Testing
I ran a few 2D and 3D examples, and tried cameras with and without
render graphs.
---
## Migration Guide
`Camera2dBundle` and `Camera3dBundle` have been deprecated in favor of
`Camera2d` and `Camera3d`. Inserting them will now also insert the other
components required by them automatically.
# Objective
Fixes#15617
## Solution
The original author confirmed it was not intentional that both these
methods exist.
They do the same, one has the better implementation and the other the
better name.
## Testing
I just ran the unit tests of the module.
---
## Migration Guide
- Change usages of `Events::oldest_id` to `Events::oldest_event_count`
- If `Events::oldest_id` was used to get the actual oldest
`EventId::id`, note that the deprecated method never reliably did that
in the first place as the buffers may contain no id currently.
# Objective
Fixes#15525
The deferred and mesh pipelines tonemapping LUT bindings were
accidentally out of sync, breaking deferred rendering.
As noted in the issue it's still broken on wasm due to hitting a texture
limit.
## Solution
Add constants for these instead of hardcoding them.
## Testing
Test with `cargo run --example deferred_rendering` and see it works, run
the same on main and see it crash.
*Additive blending* is an ubiquitous feature in game engines that allows
animations to be concatenated instead of blended. The canonical use case
is to allow a character to hold a weapon while performing arbitrary
poses. For example, if you had a character that needed to be able to
walk or run while attacking with a weapon, the typical workflow is to
have an additive blend node that combines walking and running animation
clips with an animation clip of one of the limbs performing a weapon
attack animation.
This commit adds support for additive blending to Bevy. It builds on top
of the flexible infrastructure in #15589 and introduces a new type of
node, the *add node*. Like blend nodes, add nodes combine the animations
of their children according to their weights. Unlike blend nodes,
however, add nodes don't normalize the weights to 1.0.
The `animation_masks` example has been overhauled to demonstrate the use
of additive blending in combination with masks. There are now controls
to choose an animation clip for every limb of the fox individually.
This patch also fixes a bug whereby masks were incorrectly accumulated
with `insert()` during the graph threading phase, which could cause
corruption of computed masks in some cases.
Note that the `clip` field has been replaced with an `AnimationNodeType`
enum, which breaks `animgraph.ron` files. The `Fox.animgraph.ron` asset
has been updated to the new format.
Closes#14395.
## Showcase
https://github.com/user-attachments/assets/52dfe05f-fdb3-477a-9462-ec150f93df33
## Migration Guide
* The `animgraph.ron` format has changed to accommodate the new
*additive blending* feature. You'll need to change `clip` fields to
instances of the new `AnimationNodeType` enum.
# Objective
- Another step towards #15558
## Solution
- Instead of allocating a Vec and then having wgpu copy it into a
staging buffer, write directly into the staging buffer.
- gets rid of another hidden copy, in `pad_to_alignment`.
future work:
- why is there a gcd implementation in here (and its subpar, use
binary_gcd. its in the hot path, run twice for every mesh, every frame i
think?) make it better and put it in bevy_math
- zero-copy custom mesh api to avoid having to write out a Mesh from a
custom rep
## Testing
- lighting and many_cubes run fine (and slightly faster. havent
benchmarked though)
---
## Showcase
- look ma... no copies
at least when RenderAssetUsage is GPU only :3
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Kristoffer Søholm <k.soeholm@gmail.com>
# Objective
- Contributes to #15460
## Solution
- Made `web-time` a `wasm32`-only dependency.
- Moved time-related exports to its own module for clarity.
- Feature-gated allocator requirements for `hashbrown` behind `alloc`.
- Enabled compile-time RNG for `ahash` (runtime RNG will preferentially
used in `std` environments)
- Made `thread_local` optional by feature-gating the `Parallel` type.
## Testing
- Ran CI locally.
- `cargo build -p bevy_utils --target "x86_64-unknown-none"
--no-default-features`
# Objective
Someone (let's not name names here) might've been a bit of a goofball,
and happened to forget that "playing audio" should cause this thing
called "sound" to be emitted! That someone might not have realized that
queries should be updated to account for audio using wrapper components
instead of raw asset handles after #15573.
## Solution
Update systems, and listen to the relaxing soundscapes of `Windless
Slopes.ogg` 🎵
# Objective
Allow required component default values to be provided in-line.
```rust
#[derive(Component)]
#[require(
FocusPolicy(block_focus_policy)
)]
struct SomeComponent;
fn block_focus_policy() -> FocusPolicy {
FocusPolicy::Block
}
```
May now be expressed as:
```rust
#[derive(Component)]
#[require(
FocusPolicy(|| FocusPolicy::Block)
)]
struct SomeComponent;
```
## Solution
Modified the #[require] proc macro to accept a closure.
## Testing
Tested using my branch as a dependency, and switching between the inline
closure syntax and function syntax for a bunch of different components.
## Objective
The new Required Components feature (#14791) in Bevy allows spawning a
fixed set of components with a single method with cool require macro.
However, there's currently no corresponding method to remove all those
components together. This makes it challenging to keep insertion and
removal code in sync, especially for simple using cases.
```rust
#[derive(Component)]
#[require(Y)]
struct X;
#[derive(Component, Default)]
struct Y;
world.entity_mut(e).insert(X); // Spawns both X and Y
world.entity_mut(e).remove::<X>();
world.entity_mut(e).remove::<Y>(); // We need to manually remove dependencies without any sync with the `require` macro
```
## Solution
Simplifies component management by providing operations for removal
required components.
This PR introduces simple 'footgun' methods to removes all components of
this bundle and its required components.
Two new methods are introduced:
For Commands:
```rust
commands.entity(e).remove_with_requires::<B>();
```
For World:
```rust
world.entity_mut(e).remove_with_requires::<B>();
```
For performance I created new field in Bundels struct. This new field
"contributed_bundle_ids" contains cached ids for dynamic bundles
constructed from bundle_info.cintributed_components()
## Testing
The PR includes three test cases:
1. Removing a single component with requirements using World.
2. Removing a bundle with requirements using World.
3. Removing a single component with requirements using Commands.
4. Removing a single component with **runtime** requirements using
Commands
These tests ensure the feature works as expected across different
scenarios.
## Showcase
Example:
```rust
use bevy_ecs::prelude::*;
#[derive(Component)]
#[require(Y)]
struct X;
#[derive(Component, Default)]
#[require(Z)]
struct Y;
#[derive(Component, Default)]
struct Z;
#[derive(Component)]
struct W;
let mut world = World::new();
// Spawn an entity with X, Y, Z, and W components
let entity = world.spawn((X, W)).id();
assert!(world.entity(entity).contains::<X>());
assert!(world.entity(entity).contains::<Y>());
assert!(world.entity(entity).contains::<Z>());
assert!(world.entity(entity).contains::<W>());
// Remove X and required components Y, Z
world.entity_mut(entity).remove_with_requires::<X>();
assert!(!world.entity(entity).contains::<X>());
assert!(!world.entity(entity).contains::<Y>());
assert!(!world.entity(entity).contains::<Z>());
assert!(world.entity(entity).contains::<W>());
```
## Motivation for PR
#15580
## Performance
I made simple benchmark
```rust
let mut world = World::default();
let entity = world.spawn_empty().id();
let steps = 100_000_000;
let start = std::time::Instant::now();
for _ in 0..steps {
world.entity_mut(entity).insert(X);
world.entity_mut(entity).remove::<(X, Y, Z, W)>();
}
let end = std::time::Instant::now();
println!("normal remove: {:?} ", (end - start).as_secs_f32());
println!("one remove: {:?} micros", (end - start).as_secs_f64() / steps as f64 * 1_000_000.0);
let start = std::time::Instant::now();
for _ in 0..steps {
world.entity_mut(entity).insert(X);
world.entity_mut(entity).remove_with_requires::<X>();
}
let end = std::time::Instant::now();
println!("remove_with_requires: {:?} ", (end - start).as_secs_f32());
println!("one remove_with_requires: {:?} micros", (end - start).as_secs_f64() / steps as f64 * 1_000_000.0);
```
Output:
CPU: Amd Ryzen 7 2700x
```bash
normal remove: 17.36135
one remove: 0.17361348299999999 micros
remove_with_requires: 17.534006
one remove_with_requires: 0.17534005400000002 micros
```
NOTE: I didn't find any tests or mechanism in the repository to update
BundleInfo after creating new runtime requirements with an existing
BundleInfo. So this PR also does not contain such logic.
## Future work (outside this PR)
Create cache system for fast removing components in "safe" mode, where
"safe" mode is remove only required components that will be no longer
required after removing root component.
---------
Co-authored-by: a.yamaev <a.yamaev@smartengines.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
> Alice 🌹 — Today at 3:43 PM
bevy_dev_tools::ci_testing::systems::send_events
This system should be marked as ambiguous with everything I think
## Solution
- Mark it as `ambiguous_with_all`
# Objective
Currently, sample-interpolated curves (such as those used by the glTF
loader for animations) do unnecessary extra work when `sample_clamped`
is called, since their implementations of `sample_unchecked` are already
clamped. Eliminating this redundant sampling is a small, easy
performance win which doesn't compromise on the animation system's
internal usage of `sample_clamped`, which guarantees that it never
samples curves out-of-bounds.
## Solution
For sample-interpolated curves, define `sample_clamped` in the way
`sample_unchecked` is currently defined, and then redirect
`sample_unchecked` to `sample_clamped`. This is arguably a more
idiomatic way of using the `cores` as well, which is nice.
## Testing
Ran `many_foxes` to make sure I didn't break anything.
# Objective
Support accessing dynamic resources in a dynamic system, including
accessing them by component id. This is similar to how dynamic
components can be queried using `Query<FilteredEntityMut>`.
## Solution
Create `FilteredResources` and `FilteredResourcesMut` types that act
similar to `FilteredEntityRef` and `FilteredEntityMut` and that can be
used as system parameters.
## Example
```rust
// Use `FilteredResourcesParamBuilder` to declare access to resources.
let system = (FilteredResourcesParamBuilder::new(|builder| {
builder.add_read::<B>().add_read::<C>();
}),)
.build_state(&mut world)
.build_system(resource_system);
world.init_resource::<A>();
world.init_resource::<C>();
fn resource_system(res: FilteredResources) {
// The resource exists, but we have no access, so we can't read it.
assert!(res.get::<A>().is_none());
// The resource doesn't exist, so we can't read it.
assert!(res.get::<B>().is_none());
// The resource exists and we have access, so we can read it.
let c = res.get::<C>().unwrap();
// The type parameter can be left out if it can be determined from use.
let c: Res<C> = res.get().unwrap();
}
```
## Future Work
As a follow-up PR, `ReflectResource` can be modified to take `impl
Into<FilteredResources>`, similar to how `ReflectComponent` takes `impl
Into<FilteredEntityRef>`. That will allow dynamic resources to be
accessed using reflection.
# Objective
The current observers have some unfortunate footguns where you can end
up confused about what is actually being observed. For apps you can
chain observe like `app.observe(..).observe(..)` which works like you
would expect, but if you try the same with world the first `observe()`
will return the `EntityWorldMut` for the created observer, and the
second `observe()` will only observe on the observer entity. It took
several hours for multiple people on discord to figure this out, which
is not a great experience.
## Solution
Rename `observe` on entities to `observe_entity`. It's slightly more
verbose when you know you have an entity, but it feels right to me that
observers for specific things have more specific naming, and it prevents
this issue completely.
Another possible solution would be to unify `observe` on `App` and
`World` to have the same kind of return type, but I'm not sure exactly
what that would look like.
## Testing
Simple name change, so only concern is docs really.
---
## Migration Guide
The `observe()` method on entities has been renamed to
`observe_entity()` to prevent confusion about what is being observed in
some cases.
# Objective
Fixes#14511.
`despawn` allows you to remove entities from the world. However, if the
entity does not exist, it emits a warning. This may not be intended
behavior for many users who have use cases where they need to call
`despawn` regardless of if the entity actually exists (see the issue),
or don't care in general if the entity already doesn't exist.
(Also trying to gauge interest on if this feature makes sense, I'd
personally love to have it, but I could see arguments that this might be
a footgun. Just trying to help here 😄 If there's no contention I could
also implement this for `despawn_recursive` and `despawn_descendants` in
the same PR)
## Solution
Add `try_despawn`, `try_despawn_recursive` and
`try_despawn_descendants`.
Modify `World::despawn_with_caller` to also take in a `warn` boolean
argument, which is then considered when logging the warning. Set
`log_warning` to `true` in the case of `despawn`, and `false` in the
case of `try_despawn`.
## Testing
Ran `cargo run -p ci` on macOS, it seemed fine.
# Objective
System param validation warnings should be configurable and default to
"warn once" (per system).
Fixes: #15391
## Solution
`SystemMeta` is given a new `ParamWarnPolicy` field.
The policy decides whether warnings will be emitted by each system param
when it fails validation.
The policy is updated by the system after param validation fails.
Example warning:
```
2024-09-30T18:10:04.740749Z WARN bevy_ecs::system::function_system: System fallible_params::do_nothing_fail_validation will not run because it requested inaccessible system parameter Single<(), (With<Player>, With<Enemy>)>
```
Currently, only the first invalid parameter is displayed.
Warnings can be disabled on function systems using
`.param_never_warn()`.
(there is also `.with_param_warn_policy(policy)`)
## Testing
Ran `fallible_params` example.
---------
Co-authored-by: SpecificProtagonist <vincentjunge@posteo.net>
This is an updated version of #15530. Review comments were addressed.
This commit changes the animation graph evaluation to be operate in a
more sensible order and updates the semantics of blend nodes to conform
to [the animation composition RFC]. Prior to this patch, a node graph
like this:
```
┌─────┐
│ │
│ 1 │
│ │
└──┬──┘
│
┌───────┴───────┐
│ │
▼ ▼
┌─────┐ ┌─────┐
│ │ │ │
│ 2 │ │ 3 │
│ │ │ │
└──┬──┘ └──┬──┘
│ │
┌───┴───┐ ┌───┴───┐
│ │ │ │
▼ ▼ ▼ ▼
┌─────┐ ┌─────┐ ┌─────┐ ┌─────┐
│ │ │ │ │ │ │ │
│ 4 │ │ 6 │ │ 5 │ │ 7 │
│ │ │ │ │ │ │ │
└─────┘ └─────┘ └─────┘ └─────┘
```
Would be evaluated as (((4 ⊕ 5) ⊕ 6) ⊕ 7), with the blend (lerp/slerp)
operation notated as ⊕. As quaternion multiplication isn't commutative,
this is very counterintuitive and will especially lead to trouble with
the forthcoming additive blending feature (#15198).
This patch fixes the issue by changing the evaluation order to
postorder, with children of a node evaluated in ascending order by node
index.
To do so, this patch revamps `AnimationCurve` to be based on an
*evaluation stack* and a *blend register*. During target evaluation, the
graph evaluator traverses the graph in postorder. When encountering a
clip node, the evaluator pushes the possibly-interpolated value onto the
evaluation stack. When encountering a blend node, the evaluator pops
values off the stack into the blend register, accumulating weights as
appropriate. When the graph is completely evaluated, the top element on
the stack is *committed* to the property of the component.
A new system, the *graph threading* system, is added in order to cache
the sorted postorder traversal to avoid the overhead of sorting children
at animation evaluation time. Mask evaluation has been moved to this
system so that the graph only has to be traversed at most once per
frame. Unlike the `ActiveAnimation` list, the *threaded graph* is cached
from frame to frame and only has to be regenerated when the animation
graph asset changes.
This patch currently regresses the `animate_target` performance in
`many_foxes` by around 50%, resulting in an FPS loss of about 2-3 FPS.
I'd argue that this is an acceptable price to pay for a much more
intuitive system. In the future, we can mitigate the regression with a
fast path that avoids consulting the graph if only one animation is
playing. However, in the interest of keeping this patch simple, I didn't
do so here.
[the animation composition RFC]:
https://github.com/bevyengine/rfcs/blob/main/rfcs/51-animation-composition.md
# Objective
- Describe the objective or issue this PR addresses.
- If you're fixing a specific issue, say "Fixes #X".
## Solution
- Describe the solution used to achieve the objective above.
## Testing
- Did you test these changes? If so, how?
- Are there any parts that need more testing?
- How can other people (reviewers) test your changes? Is there anything
specific they need to know?
- If relevant, what platforms did you test these changes on, and are
there any important ones you can't test?
---
## Showcase
> This section is optional. If this PR does not include a visual change
or does not add a new feature, you can delete this section.
- Help others understand the result of this PR by showcasing your
awesome work!
- If this PR adds a new feature or public API, consider adding a brief
pseudo-code snippet of it in action
- If this PR includes a visual change, consider adding a screenshot,
GIF, or video
- If you want, you could even include a before/after comparison!
- If the Migration Guide adequately covers the changes, you can delete
this section
While a showcase should aim to be brief and digestible, you can use a
toggleable section to save space on longer showcases:
<details>
<summary>Click to view showcase</summary>
```rust
println!("My super cool code.");
```
</details>
## Migration Guide
> This section is optional. If there are no breaking changes, you can
delete this section.
- If this PR is a breaking change (relative to the last release of
Bevy), describe how a user might need to migrate their code to support
these changes
- Simply adding new functionality is not a breaking change.
- Fixing behavior that was definitely a bug, rather than a questionable
design choice is not a breaking change.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- The capsule gizmo uses straight lines for the upper and lower circle
which looks pretty ugly.
## Solution
- Use the circle gizmo instead
---
## Showcase
**BEFORE**
**AFTER**
(the circles are red for demonstration purposes only)
# Notes
I also tried using 3d arcs instead of circles but it looks like arcs
need a lot more computation for an almost identical end result. Circles
seem much simpler. The only thing I'm unsure about is if the rotation
stuff is correct. It worked in my testing though.
# Objective
The `queue()` method is an optional trait method which is necessary for
deferred operations (such as command queues) to work properly in the
context of an observer.
This method was omitted from the proc_macro blanket implementation of
`ParamSet` for tuples; as a result, SystemParams with deferred
application (such as Commands) would not work in observers if they were
part of a ParamSet.
This appears to have been a simple omission, as `queue()` was already
implemented for the separate blanket implementation of `ParamSet` for
`Vec<T>`. In both cases, it is a simple pass-through to the component
SystemParams.
## Solution
Add the `queue()` method implementation to the `impl_param_set` proco
macro.
## Testing
Added a unit test which clearly demonstrates the issue. It fails before
the fix, and passes afterwards.
---
# Objective
It is somewhat unlikely we will actually be able to support
`TransformCurve` (introduced in #15434) after the `AnimationGraph`
evaluation order changes in the immediate future. This is because
correctly blending overlapping animation properties is nontrivial, and
`Transform` overlaps with all of its own fields. We could still
potentially create something like this in the future, but it's likely to
require significant design and implementation work. By way of contrast,
the single-property wrappers `TranslationCurve`, `ScaleCurve`, and
`RotationCurve` should work perfectly fine, since they are
non-overlapping.
In this version release, creating `TransformCurve` in userspace is also
quite easy if desired (see the deletions from this PR).
## Solution
Delete `TransformCurve`.
## Migration Guide
There is no released version that contains this, but we should make sure
that `TransformCurve` is excluded from the release notes for #15434 if
we merge this pull request.
# Objective
- I'm building a streaming plugin for `bevy_remote` and accessing to
builtin method will be very valuable
## Solution
- Add a method to allow access a handler by method name.
## Testing
- CI should pass
# Objective
- Closes#15577
## Solution
The following functions can now also take multiple component IDs and
return multiple pointers back:
- `EntityRef::get_by_id`
- `EntityMut::get_by_id`
- `EntityMut::into_borrow_by_id`
- `EntityMut::get_mut_by_id`
- `EntityMut::into_mut_by_id`
- `EntityWorldMut::get_by_id`
- `EntityWorldMut::into_borrow_by_id`
- `EntityWorldMut::get_mut_by_id`
- `EntityWorldMut::into_mut_by_id`
If you pass in X, you receive Y:
- give a single `ComponentId`, receive a single `Ptr`/`MutUntyped`
- give a `[ComponentId; N]` (array), receive a `[Ptr; N]`/`[MutUntyped;
N]`
- give a `&[ComponentId; N]` (array), receive a `[Ptr; N]`/`[MutUntyped;
N]`
- give a `&[ComponentId]` (slice), receive a
`Vec<Ptr>`/`Vec<MutUntyped>`
- give a `&HashSet<ComponentId>`, receive a `HashMap<ComponentId,
Ptr>`/`HashMap<ComponentId, MutUntyped>`
## Testing
- Added 4 new tests.
---
## Migration Guide
- The following functions now return an `Result<_,
EntityComponentError>` instead of a `Option<_>`: `EntityRef::get_by_id`,
`EntityMut::get_by_id`, `EntityMut::into_borrow_by_id`,
`EntityMut::get_mut_by_id`, `EntityMut::into_mut_by_id`,
`EntityWorldMut::get_by_id`, `EntityWorldMut::into_borrow_by_id`,
`EntityWorldMut::get_mut_by_id`, `EntityWorldMut::into_mut_by_id`
# Objective
Citing @mweatherley
> There is a lot of shortfall for simple cases— e.g., we should have
library functions for making a curve connecting two points, eased
versions of that, and so on.
## Solution
This PR implements
- a simple `Easing` trait which is implemented for all `impl Curve<f32>`
types. We can't really guarantee that these curves have unit interval
domain, which some people would probably expect, but it is documented
that this isn't the case for these types and we redirect to
`EasingCurve` which is used for that purpose
- an `EasingCurve` struct, which is used to interpolate between two
values `start` and `end` using a `impl Easing` curve where the curve
will be guaranteed to be reparametrized
- a `LinearCurve` which linearly interpolates between two values `start`
and `end`
- a `CubicBezierCurve` which interpolates between `start` and `end`
values using a `CubicSegment`
- a `StepCurve` which interpolates between `start` and `end` with an
step-function with `n` steps
- an `ElasticCurve` which interpolates between `start` and `end` with
spring like behavior where the elasticity of the spring is configurable
- some `FunctionCurve` easing curves for different popular functions
including: `quadratic_ease_in`, `quadratic_ease_out`, `smoothstep`,
`identity`
## Testing
- there are a few new tests for all of these in the main module
---------
Co-authored-by: eckz <567737+eckz@users.noreply.github.com>
Co-authored-by: Miles Silberling-Cook <NthTensor@users.noreply.github.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Matty <weatherleymatthew@gmail.com>
Early implementation. I still have to fix the documentation and consider
writing a small migration guide.
Questions left to answer:
* [x] should thickness be an overridable constant?
* [x] is there a better way to implement `Eq`/`Hash` for `SSAOMethod`?
* [x] do we want to keep the linear sampler for the depth texture?
* [x] is there a better way to separate the logic than preprocessor
macros?
## Migration guide
SSAO algorithm was changed from GTAO to VBAO (visibility bitmasks). A
new field, `constant_object_thickness`, was added to
`ScreenSpaceAmbientOcclusion`. `ScreenSpaceAmbientOcclusion` also lost
its `Eq` and `Hash` implementations.
---------
Co-authored-by: JMS55 <47158642+JMS55@users.noreply.github.com>
# Objective
Relevant: #15208
## Solution
I went ahead and added the variadics documentation in all applicable
locations.
## Testing
- I built the documentation and inspected it to see whether the feature
is there.
As discussed in #15521
- Partial revert of #14897, reverting the change to the methods to
consume `self`
- The `insert_if` method is kept
The migration guide of #14897 should be removed
Closes#15521
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Remove dependency in bevy_asset to bevy_winit
- First step for #15565
## Solution
- the static `ANDROID_APP` and the `android_activity` reexport are now
in `bevy_window`
## Migration Guide
If you use the `android_activity` reexport from
`bevy::winit::android_activity`, it is now in
`bevy:🪟:android_activity`. Same for the `ANDROID_APP` static
## Objective
I am using BRP for a web inspector. To get components from a entity is
first do a `bevy/list` on the specific entity and then use the result in
a `bevy/get` request. The problem with this is `bevy/list` returns all
components even if they aren't reflect-able (which is what I expect) but
when I then do a `bevy/get` request even if all bar one of the
components are reflect-able the request will fail.
## Solution
Update the `bevy/get` response to include a map of components like it
did for successful request and a map of errors. This means if one or
more components are not present on the entity or cannot be reflected it
will not fail the entire request.
I also only did `bevy/get` as I don't think any of the other methods
would benefit from this.
## Testing
I tested this with my inspector and with a http client and it worked as
expected.
---------
Co-authored-by: Pablo Reinhardt <126117294+pablo-lua@users.noreply.github.com>
# Objective
### The Problem
Currently, the reflection deserializers give little control to users for
how a type is deserialized. The most control a user can have is to
register `ReflectDeserialize`, which will use a type's `Deserialize`
implementation.
However, there are times when a type may require slightly more control.
For example, let's say we want to make Bevy's `Mesh` easier to
deserialize via reflection (assume `Mesh` actually implemented
`Reflect`). Since we want this to be extensible, we'll make it so users
can use their own types so long as they satisfy `Into<Mesh>`. The end
result should allow users to define a RON file like:
```rust
{
"my_game::meshes::Sphere": (
radius: 2.5
)
}
```
### The Current Solution
Since we don't know the types ahead of time, we'll need to use
reflection. Luckily, we can access type information dynamically via the
type registry. Let's make a custom type data struct that users can
register on their types:
```rust
pub struct ReflectIntoMesh {
// ...
}
impl<T: FromReflect + Into<Mesh>> FromType<T> for ReflectIntoMesh {
fn from_type() -> Self {
// ...
}
}
```
Now we'll need a way to use this type data during deserialization.
Unfortunately, we can't use `Deserialize` since we need access to the
registry. This is where `DeserializeSeed` comes in handy:
```rust
pub struct MeshDeserializer<'a> {
pub registry: &'a TypeRegistry
}
impl<'a, 'de> DeserializeSeed<'de> for MeshDeserializer<'a> {
type Value = Mesh;
fn deserialize<D>(self, deserializer: D) -> Result<Self::Value, D::Error>
where
D: serde::Deserializer<'de>,
{
struct MeshVisitor<'a> {
registry: &'a TypeRegistry
}
impl<'a, 'de> Visitor<'de> for MeshVisitor<'a> {
fn expecting(&self, formatter: &mut Formatter) -> std::fmt::Result {
write!(formatter, "map containing mesh information")
}
fn visit_map<A>(self, mut map: A) -> Result<Self::Value, serde:🇩🇪:Error> where A: MapAccess<'de> {
// Parse the type name
let type_name = map.next_key::<String>()?.unwrap();
// Deserialize the value based on the type name
let registration = self.registry
.get_with_name(&type_name)
.expect("should be registered");
let value = map.next_value_seed(TypedReflectDeserializer {
registration,
registry: self.registry,
})?;
// Convert the deserialized value into a `Mesh`
let into_mesh = registration.data::<ReflectIntoMesh>().unwrap();
Ok(into_mesh.into(value))
}
}
}
}
```
### The Problem with the Current Solution
The solution above works great when all we need to do is deserialize
`Mesh` directly. But now, we want to be able to deserialize a struct
like this:
```rust
struct Fireball {
damage: f32,
mesh: Mesh,
}
```
This might look simple enough and should theoretically be no problem for
the reflection deserializer to handle, but this is where our
`MeshDeserializer` solution starts to break down.
In order to use `MeshDeserializer`, we need to have access to the
registry. The reflection deserializers have access to that, but we have
no way of borrowing it for our own deserialization since they have no
way of knowing about `MeshDeserializer`.
This means we need to implement _another_ `DeserializeSeed`— this time
for `Fireball`!
And if we decided to put `Fireball` inside another type, well now we
need one for that type as well.
As you can see, this solution does not scale well and results in a lot
of unnecessary boilerplate for the user.
## Solution
> [!note]
> This PR originally only included the addition of
`DeserializeWithRegistry`. Since then, a corresponding
`SerializeWithRegistry` trait has also been added. The reasoning and
usage is pretty much the same as the former so I didn't bother to update
the full PR description.
Created the `DeserializeWithRegistry` trait and
`ReflectDeserializeWithRegistry` type data.
The `DeserializeWithRegistry` trait works like a standard `Deserialize`
but provides access to the registry. And by registering the
`ReflectDeserializeWithRegistry` type data, the reflection deserializers
will automatically use the `DeserializeWithRegistry` implementation,
just like it does for `Deserialize`.
All we need to do is make the following changes:
```diff
#[derive(Reflect)]
+ #[reflect(DeserializeWithRegistry)]
struct Mesh {
// ...
}
- impl<'a, 'de> DeserializeSeed<'de> for MeshDeserializer<'a> {
- type Value = Mesh;
- fn deserialize<D>(self, deserializer: D) -> Result<Self::Value, D::Error>
+ impl<'de> DeserializeWithRegistry<'de> for Mesh {
+ fn deserialize<D>(deserializer: D, registry: &TypeRegistry) -> Result<Self, D::Error>
where
D: serde::Deserializer<'de>,
{
// ...
}
}
```
Now, any time the reflection deserializer comes across `Mesh`, it will
opt to use its `DeserializeWithRegistry` implementation. And this means
we no longer need to create a whole slew of `DeserializeSeed` types just
to deserialize `Mesh`.
### Why not a trait like `DeserializeSeed`?
While this would allow for anyone to define a deserializer for `Mesh`,
the problem is that it means __anyone can define a deserializer for
`Mesh`.__ This has the unfortunate consequence that users can never be
certain that their registration of `ReflectDeserializeSeed` is the one
that will actually be used.
We could consider adding something like that in the future, but I think
this PR's solution is much safer and follows the example set by
`ReflectDeserialize`.
### What if we made the `TypeRegistry` globally available?
This is one potential solution and has been discussed before (#6101).
However, that change is much more controversial and comes with its own
set of disadvantages (can't have multiple registries such as with
multiple worlds, likely some added performance cost with each access,
etc.).
### Followup Work
Once this PR is merged, we should consider merging `ReflectDeserialize`
into `DeserializeWithRegistry`. ~~There is already a blanket
implementation to make this transition generally pretty
straightforward.~~ The blanket implementations were removed for the sake
of this PR and will need to be re-added in the followup. I would propose
that we first mark `ReflectDeserialize` as deprecated, though, before we
outright remove it in a future release.
---
## Changelog
- Added the `DeserializeReflect` trait and `ReflectDeserializeReflect`
type data
- Added the `SerializeReflect` trait and `ReflectSerializeReflect` type
data
- Added `TypedReflectDeserializer::of` convenience constructor
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: aecsocket <43144841+aecsocket@users.noreply.github.com>
# Objective
- Fixes#14826
- For context, see #15238
## Solution
Add a `GhostNode` component to `bevy_ui` and update all the relevant
systems to use it to traverse for UI children.
- [x] `ghost_hierarchy` module
- [x] Add `GhostNode`
- [x] Add `UiRootNodes` system param for iterating (ghost-aware) UI root
nodes
- [x] Add `UiChildren` system param for iterating (ghost-aware) UI
children
- [x] Update `layout::ui_layout_system`
- [x] Use ghost-aware root nodes for camera updates
- [x] Update and remove children in taffy
- [x] Initial spawn
- [x] Detect changes on nested UI children
- [x] Use ghost-aware children traversal in
`update_uinode_geometry_recursive`
- [x] Update the rest of the UI systems to use the ghost hierarchy
- [x] `stack::ui_stack_system`
- [x] `update::`
- [x] `update_clipping_system`
- [x] `update_target_camera_system`
- [x] `accessibility::calc_name`
## Testing
- [x] Added a new example `ghost_nodes` that can be used as a testbed.
- [x] Added unit tests for _some_ of the traversal utilities in
`ghost_hierarchy`
- [x] Ensure this fulfills the needs for currently known use cases
- [x] Reactivity libraries (test with `bevy_reactor`)
- [ ] Text spans (mentioned by koe [on
discord](https://discord.com/channels/691052431525675048/1285371432460881991/1285377442998915246))
---
## Performance
[See comment
below](https://github.com/bevyengine/bevy/pull/15341#issuecomment-2385456820)
## Migration guide
Any code that previously relied on `Parent`/`Children` to iterate UI
children may now want to use `bevy_ui::UiChildren` to ensure ghost nodes
are skipped, and their first descendant Nodes included.
UI root nodes may now be children of ghost nodes, which means
`Without<Parent>` might not query all root nodes. Use
`bevy_ui::UiRootNodes` where needed to iterate root nodes instead.
## Potential future work
- Benchmarking/optimizations of hierarchies containing lots of ghost
nodes
- Further exploration of UI hierarchies and markers for root nodes/leaf
nodes to create better ergonomics for things like `UiLayer` (world-space
ui)
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: UkoeHB <37489173+UkoeHB@users.noreply.github.com>
# Objective
- Prepare `TextPipeline` to work with multi-entity text blocks. See
https://github.com/bevyengine/bevy/discussions/15014
## Solution
- Refactor `TextPipeline::update_buffer` to accept an iterator instead
of slice. Adjust `update_buffer` implementation to only iterate spans
once instead of three times (which would require iterating a hierarchy
three times with multi-entity blocks).
## Testing
- Tested with `text_debug` example.
# Objective
Again, a step forward in the migration to required components: a bunch
of camera rendering cormponents!
Note that this does not include the camera components themselves yet,
because the naming and API for `Camera` hasn't been fully decided yet.
## Solution
As per the [selected
proposals](https://hackmd.io/@bevy/required_components/%2FpiqD9GOdSFKZZGzzh3C7Uw):
- Deprecate `MotionBlurBundle` in favor of the `MotionBlur` component
- Deprecate `TemporalAntiAliasBundle` in favor of the
`TemporalAntiAliasing` component
- Deprecate `ScreenSpaceAmbientOcclusionBundle` in favor of the
`ScreenSpaceAmbientOcclusion` component
- Deprecate `ScreenSpaceReflectionsBundle` in favor of the
`ScreenSpaceReflections` component
---
## Migration Guide
`MotionBlurBundle`, `TemporalAntiAliasBundle`,
`ScreenSpaceAmbientOcclusionBundle`, and `ScreenSpaceReflectionsBundle`
have been deprecated in favor of the `MotionBlur`,
`TemporalAntiAliasing`, `ScreenSpaceAmbientOcclusion`, and
`ScreenSpaceReflections` components instead. Inserting them will now
also insert the other components required by them automatically.
# Objective
What's that? Another PR for the grand migration to required components?
This time, audio!
## Solution
Deprecate `AudioSourceBundle`, `AudioBundle`, and `PitchBundle`, as per
the [chosen
proposal](https://hackmd.io/@bevy/required_components/%2Fzxgp-zMMRUCdT7LY1ZDQwQ).
However, we cannot call the component `AudioSource`, because that's what
the stored asset is called. I deliberated on a few names, like
`AudioHandle`, or even just `Audio`, but landed on `AudioPlayer`, since
it's probably the most accurate and "nice" name for this. Open to
alternatives though.
---
## Migration Guide
Replace all insertions of `AudioSoucreBundle`, `AudioBundle`, and
`PitchBundle` with the `AudioPlayer` component. The other components
required by it will now be inserted automatically.
In cases where the generics cannot be inferred, you may need to specify
them explicitly. For example:
```rust
commands.spawn(AudioPlayer::<AudioSource>(asset_server.load("sounds/sick_beats.ogg")));
```
# Objective
A step in the migration to required components: scenes!
## Solution
As per the [selected
proposal](https://hackmd.io/@bevy/required_components/%2FPJtNGVMMQhyM0zIvCJSkbA):
- Deprecate `SceneBundle` and `DynamicSceneBundle`.
- Add `SceneRoot` and `DynamicSceneRoot` components, which wrap a
`Handle<Scene>` and `Handle<DynamicScene>` respectively.
## Migration Guide
Asset handles for scenes and dynamic scenes must now be wrapped in the
`SceneRoot` and `DynamicSceneRoot` components. Raw handles as components
no longer spawn scenes.
Additionally, `SceneBundle` and `DynamicSceneBundle` have been
deprecated. Instead, use the scene components directly.
Previously:
```rust
let model_scene = asset_server.load(GltfAssetLabel::Scene(0).from_asset("model.gltf"));
commands.spawn(SceneBundle {
scene: model_scene,
transform: Transform::from_xyz(-4.0, 0.0, -3.0),
..default()
});
```
Now:
```rust
let model_scene = asset_server.load(GltfAssetLabel::Scene(0).from_asset("model.gltf"));
commands.spawn((
SceneRoot(model_scene),
Transform::from_xyz(-4.0, 0.0, -3.0),
));
```
# Objective
- Improve code quality in preparation for
https://github.com/bevyengine/bevy/discussions/15014
## Solution
- Rename BreakLineOn to LineBreak.
## Migration Guide
`BreakLineOn` was renamed to `LineBreak`, and paramters named
`linebreak_behavior` were renamed to `linebreak`.
# Objective
Add two features to switch bevy to use `NativeActivity` or
`GameActivity` on Android, use `GameActivity` by default.
Also close #12058 and probably #12026 .
## Solution
Add two features to the corresponding crates so you can toggle it, like
what `winit` and `android-activity` crate did.
---
## Changelog
Removed default `NativeActivity` feature implementation for Android,
added two new features to enable `NativeActivity` and `GameActivity`,
and use `GameActivity` by default.
## Migration Guide
Because `cargo-apk` is not compatible with `GameActivity`,
building/running using `cargo apk build/run -p bevy_mobile_example` is
no longer possible.
Users should follow the new workflow described in document.
---------
Co-authored-by: François Mockers <francois.mockers@vleue.com>
Co-authored-by: BD103 <59022059+BD103@users.noreply.github.com>
Co-authored-by: Rich Churcher <rich.churcher@gmail.com>
# Objective
A big step in the migration to required components: meshes and
materials!
## Solution
As per the [selected
proposal](https://hackmd.io/@bevy/required_components/%2Fj9-PnF-2QKK0on1KQ29UWQ):
- Deprecate `MaterialMesh2dBundle`, `MaterialMeshBundle`, and
`PbrBundle`.
- Add `Mesh2d` and `Mesh3d` components, which wrap a `Handle<Mesh>`.
- Add `MeshMaterial2d<M: Material2d>` and `MeshMaterial3d<M: Material>`,
which wrap a `Handle<M>`.
- Meshes *without* a mesh material should be rendered with a default
material. The existence of a material is determined by
`HasMaterial2d`/`HasMaterial3d`, which is required by
`MeshMaterial2d`/`MeshMaterial3d`. This gets around problems with the
generics.
Previously:
```rust
commands.spawn(MaterialMesh2dBundle {
mesh: meshes.add(Circle::new(100.0)).into(),
material: materials.add(Color::srgb(7.5, 0.0, 7.5)),
transform: Transform::from_translation(Vec3::new(-200., 0., 0.)),
..default()
});
```
Now:
```rust
commands.spawn((
Mesh2d(meshes.add(Circle::new(100.0))),
MeshMaterial2d(materials.add(Color::srgb(7.5, 0.0, 7.5))),
Transform::from_translation(Vec3::new(-200., 0., 0.)),
));
```
If the mesh material is missing, previously nothing was rendered. Now,
it renders a white default `ColorMaterial` in 2D and a
`StandardMaterial` in 3D (this can be overridden). Below, only every
other entity has a material:
Why white? This is still open for discussion, but I think white makes
sense for a *default* material, while *invalid* asset handles pointing
to nothing should have something like a pink material to indicate that
something is broken (I don't handle that in this PR yet). This is kind
of a mix of Godot and Unity: Godot just renders a white material for
non-existent materials, while Unity renders nothing when no materials
exist, but renders pink for invalid materials. I can also change the
default material to pink if that is preferable though.
## Testing
I ran some 2D and 3D examples to test if anything changed visually. I
have not tested all examples or features yet however. If anyone wants to
test more extensively, it would be appreciated!
## Implementation Notes
- The relationship between `bevy_render` and `bevy_pbr` is weird here.
`bevy_render` needs `Mesh3d` for its own systems, but `bevy_pbr` has all
of the material logic, and `bevy_render` doesn't depend on it. I feel
like the two crates should be refactored in some way, but I think that's
out of scope for this PR.
- I didn't migrate meshlets to required components yet. That can
probably be done in a follow-up, as this is already a huge PR.
- It is becoming increasingly clear to me that we really, *really* want
to disallow raw asset handles as components. They caused me a *ton* of
headache here already, and it took me a long time to find every place
that queried for them or inserted them directly on entities, since there
were no compiler errors for it. If we don't remove the `Component`
derive, I expect raw asset handles to be a *huge* footgun for users as
we transition to wrapper components, especially as handles as components
have been the norm so far. I personally consider this to be a blocker
for 0.15: we need to migrate to wrapper components for asset handles
everywhere, and remove the `Component` derive. Also see
https://github.com/bevyengine/bevy/issues/14124.
---
## Migration Guide
Asset handles for meshes and mesh materials must now be wrapped in the
`Mesh2d` and `MeshMaterial2d` or `Mesh3d` and `MeshMaterial3d`
components for 2D and 3D respectively. Raw handles as components no
longer render meshes.
Additionally, `MaterialMesh2dBundle`, `MaterialMeshBundle`, and
`PbrBundle` have been deprecated. Instead, use the mesh and material
components directly.
Previously:
```rust
commands.spawn(MaterialMesh2dBundle {
mesh: meshes.add(Circle::new(100.0)).into(),
material: materials.add(Color::srgb(7.5, 0.0, 7.5)),
transform: Transform::from_translation(Vec3::new(-200., 0., 0.)),
..default()
});
```
Now:
```rust
commands.spawn((
Mesh2d(meshes.add(Circle::new(100.0))),
MeshMaterial2d(materials.add(Color::srgb(7.5, 0.0, 7.5))),
Transform::from_translation(Vec3::new(-200., 0., 0.)),
));
```
If the mesh material is missing, a white default material is now used.
Previously, nothing was rendered if the material was missing.
The `WithMesh2d` and `WithMesh3d` query filter type aliases have also
been removed. Simply use `With<Mesh2d>` or `With<Mesh3d>`.
---------
Co-authored-by: Tim Blackbird <justthecooldude@gmail.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
Another part of the migration to required components: fog volumes!
## Solution
Deprecate `FogVolumeBundle` and make `FogVolume` require `Transform` and
`Visibility`, as per the [chosen
proposal](https://hackmd.io/@bevy/required_components/%2FcO7JPSAQR5G0J_j5wNwtOQ).
---
## Migration Guide
Replace all insertions of `FogVolumeBundle` with the `Visibility`
component. The other components required by it will now be inserted
automatically.
Previous PR https://github.com/bevyengine/bevy/pull/14549 was closed in
error and couldn't be reopened since I had updated the branch
😿
# Objective
Fixes#14465
## Solution
`ReflectMapEntities` now works similarly to `MapEntities` in that it
works on the reflected value itself rather than the component in the
world after insertion. This makes it so that observers see the remapped
entities on insertion rather than the entity IDs from the scene.
`ReflectMapEntities` now works for both components and resources, so we
only need the one.
## Testing
* New unit test for `Observer`s + `DynamicScene`s
* New unit test for `Observer`s + `Scene`s
* Open to suggestions for other tests!
---
## Migration Guide
- Consumers of `ReflectMapEntities` will need to call `map_entities` on
values prior to inserting them into the world.
- Implementors of `MapEntities` will need to remove the `mappings`
method, which is no longer needed for `ReflectMapEntities` and has been
removed from the trait.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Hennadii Chernyshchyk <genaloner@gmail.com>
# Objective
- First step towards #15558
## Solution
- Rename `get_vertex_buffer_data` to `create_packed_vertex_buffer_data`
to make it clear that it is not "free" and actually allocates
- Compute length analytically for preallocation instead of creating the
buffer to get its length and immediately discard it
- Use existing vertex attribute size calculation method to reduce code
duplication
- Fix a bug where mesh index data was being replaced by unnecessarily
newly created mesh vertex data in some cases
- Overall reduces mesh copies by two. We still have plenty to go, but
these were the easy ones.
## Testing
- I ran 3d_scene, lighting, and many_cubes, they look fine.
- Benchmarks would be nice, but this is very obviously a win in perf and
correctness.
---
## Migration Guide
- `Mesh::create_packed_vertex_buffer_data` has been renamed
`Mesh::create_packed_vertex_buffer_data` to reflect the fact that it
copies data and allocates.
## Showcase
- look mom, less copies
# Objective
The `NestedLoader` API as it stands right now is somewhat lacking:
- It consists of several types `NestedLoader`, `UntypedNestedLoader`,
`DirectNestedLoader`, and `UntypedDirectNestedLoader`, where a typestate
pattern on `NestedLoader` would be make it more obvious what it does,
and allow centralising the documentation
- The term "untyped" in the asset loader code is overloaded. It can mean
either:
- we have literally no idea what the type of this asset will be when we
load it (I dub this "unknown type")
- we know what type of asset it will be, but we don't know it statically
- we only have a TypeId (I dub this "dynamic type" / "erased")
- There is no way to get an `UntypedHandle` (erased) given a `TypeId`
## Solution
Changes `NestedLoader` into a type-state pattern, adding two type
params:
- `T` determines the typing
- `StaticTyped`, the default, where you pass in `A` statically into `fn
load<A>() -> ..`
- `DynamicTyped`, where you give a `TypeId`, giving you a
`UntypedHandle`
- `UnknownTyped`, where you have literally no idea what type of asset
you're loading, giving you a `Handle<LoadedUntypedAsset>`
- `M` determines the "mode" (bikeshedding TBD, I couldn't come up with a
better name)
- `Deferred`, the default, won't load the asset when you call `load`,
but it does give you a `Handle` to it (this is nice since it can be a
sync fn)
- `Immediate` will load the asset as soon as you call it, and give you
access to it, but you must be in an async context to call it
Changes some naming of internals in `AssetServer` to fit the new
definitions of "dynamic type" and "unknown type". Note that I didn't do
a full pass over this code to keep the diff small. That can probably be
done in a new PR - I think the definiton I laid out of unknown type vs.
erased makes it pretty clear where each one applies.
<details>
<summary>Old issue</summary>
The only real problem I have with this PR is the requirement to pass in
`type_name` (from `core::any::type_name`) into Erased. Users might not
have that type name, only the ID, and it just seems sort of weird to
*have* to give an asset type name. However, the reason we need it is
because of this:
```rs
pub(crate) fn get_or_create_path_handle_erased(
&mut self,
path: AssetPath<'static>,
type_id: TypeId,
type_name: &str,
loading_mode: HandleLoadingMode,
meta_transform: Option<MetaTransform>,
) -> (UntypedHandle, bool) {
let result = self.get_or_create_path_handle_internal(
path,
Some(type_id),
loading_mode,
meta_transform,
);
// it is ok to unwrap because TypeId was specified above
unwrap_with_context(result, type_name).unwrap()
}
pub(crate) fn unwrap_with_context<T>(
result: Result<T, GetOrCreateHandleInternalError>,
type_name: &str,
) -> Option<T> {
match result {
Ok(value) => Some(value),
Err(GetOrCreateHandleInternalError::HandleMissingButTypeIdNotSpecified) => None,
Err(GetOrCreateHandleInternalError::MissingHandleProviderError(_)) => {
panic!("Cannot allocate an Asset Handle of type '{type_name}' because the asset type has not been initialized. \
Make sure you have called app.init_asset::<{type_name}>()")
}
}
}
```
This `unwrap_with_context` is literally the only reason we need the
`type_name`. Potentially, this can be turned into an `impl
Into<Option<&str>>`, and output a different error message if the type
name is missing. Since if we are loading an asset where we only know the
type ID, by definition we can't output that error message, since we
don't have the type name. I'm open to suggestions on this.
</details>
## Testing
Not sure how to test this, since I kept most of the actual NestedLoader
logic the same. The only new API is loading an `UntypedHandle` when in
the `DynamicTyped, Immediate` state.
## Migration Guide
Code which uses `bevy_asset`'s `LoadContext::loader` / `NestedLoader`
will see some naming changes:
- `untyped` is replaced by `with_unknown_type`
- `with_asset_type` is replaced by `with_static_type`
- `with_asset_type_id` is replaced by `with_dynamic_type`
- `direct` is replaced by `immediate` (the opposite of "immediate" is
"deferred")
# Objective
- This PR fixes#12488
## Solution
- This PR adds a new property to `Camera` that emulates the
functionality of the
[setViewOffset()](https://threejs.org/docs/#api/en/cameras/PerspectiveCamera.setViewOffset)
API in three.js.
- When set, the perspective and orthographic projections will restrict
the visible area of the camera to a part of the view frustum defined by
`offset` and `size`.
## Testing
- In the new `camera_sub_view` example, a fixed, moving and control sub
view is created for both perspective and orthographic projection
- Run the example with `cargo run --example camera_sub_view`
- The code can be tested by adding a `SubCameraView` to a camera
---
## Showcase
- Left Half: Perspective Projection
- Right Half: Orthographic Projection
- Small boxes in order:
- Sub view of the left half of the full image
- Sub view moving from the top left to the bottom right of the full
image
- Sub view of the full image (acting as a control)
- Large box: No sub view
<details>
<summary>Shortened camera setup of `camera_sub_view` example</summary>
```rust
// Main perspective Camera
commands.spawn(Camera3dBundle {
transform,
..default()
});
// Perspective camera left half
commands.spawn(Camera3dBundle {
camera: Camera {
sub_camera_view: Some(SubCameraView {
// Set the sub view camera to the left half of the full image
full_size: uvec2(500, 500),
offset: ivec2(0, 0),
size: uvec2(250, 500),
}),
order: 1,
..default()
},
transform,
..default()
});
// Perspective camera moving
commands.spawn((
Camera3dBundle {
camera: Camera {
sub_camera_view: Some(SubCameraView {
// Set the sub view camera to a fifth of the full view and
// move it in another system
full_size: uvec2(500, 500),
offset: ivec2(0, 0),
size: uvec2(100, 100),
}),
order: 2,
..default()
},
transform,
..default()
},
MovingCameraMarker,
));
// Perspective camera control
commands.spawn(Camera3dBundle {
camera: Camera {
sub_camera_view: Some(SubCameraView {
// Set the sub view to the full image, to ensure that it matches
// the projection without sub view
full_size: uvec2(450, 450),
offset: ivec2(0, 0),
size: uvec2(450, 450),
}),
order: 3,
..default()
},
transform,
..default()
});
// Main orthographic camera
commands.spawn(Camera3dBundle {
projection: OrthographicProjection {
...
}
.into(),
camera: Camera {
order: 4,
..default()
},
transform,
..default()
});
// Orthographic camera left half
commands.spawn(Camera3dBundle {
projection: OrthographicProjection {
...
}
.into(),
camera: Camera {
sub_camera_view: Some(SubCameraView {
// Set the sub view camera to the left half of the full image
full_size: uvec2(500, 500),
offset: ivec2(0, 0),
size: uvec2(250, 500),
}),
order: 5,
..default()
},
transform,
..default()
});
// Orthographic camera moving
commands.spawn((
Camera3dBundle {
projection: OrthographicProjection {
...
}
.into(),
camera: Camera {
sub_camera_view: Some(SubCameraView {
// Set the sub view camera to a fifth of the full view and
// move it in another system
full_size: uvec2(500, 500),
offset: ivec2(0, 0),
size: uvec2(100, 100),
}),
order: 6,
..default()
},
transform,
..default()
},
MovingCameraMarker,
));
// Orthographic camera control
commands.spawn(Camera3dBundle {
projection: OrthographicProjection {
...
}
.into(),
camera: Camera {
sub_camera_view: Some(SubCameraView {
// Set the sub view to the full image, to ensure that it matches
// the projection without sub view
full_size: uvec2(450, 450),
offset: ivec2(0, 0),
size: uvec2(450, 450),
}),
order: 7,
..default()
},
transform,
..default()
});
```
</details>
# Objective
- Fixes#9968
## Solution
- Uses
[open_dir](https://docs.rs/ndk/latest/ndk/asset/struct.AssetManager.html#method.open_dir)
to read directories and collects child list, since it can't be shared
across threads.
- For `is_directory`, uses result of
[open](https://docs.rs/ndk/latest/ndk/asset/struct.AssetManager.html#method.open),
which will fail for directories. I tried using the result of `open_dir`
for this, but it was successful for files too, which made loading
folders return empty lists, since `open_dir` was successful and treated
all files as empty directories.
- Ignoring `meta` files was copied from filesystem implementation
---
## Changelog
- Fixed: Android's AssetReader implementation now supports
read_directory and is_directory.
## Notes
I noticed late that there was the #9968 issue (I only noticed #9591), so
I have also missed that a PR was already open (#9969). Feel free to copy
over the fixes from this one over there.
The only difference I notice between these 2, is that I have used `open`
instead of `open_dir` for `is_directory` implementation. I have tried
with `open_dir` too, but unfortunately that didn't work. I tested this
on an actual device, using the mobile example, by making some minor
changes:
```rust
#[derive(Resource)]
struct FolderAssets(Handle<LoadedFolder>);
// the `bevy_main` proc_macro generates the required boilerplate for iOS and Android
#[bevy_main]
fn main() {
// ...
.add_systems(Startup, (setup_scene, load_music_files))
.add_systems(
Update,
// Removed the handle_lifetime since AudioBundle is added later
(touch_camera, button_handler, setup_music),
);
// ...
}
fn load_music_files(asset_server: Res<AssetServer>, mut commands: Commands) {
let sounds = asset_server.load_folder("sounds");
commands.insert_resource(FolderAssets(sounds));
}
fn setup_music(
mut commands: Commands,
folders: Res<Assets<LoadedFolder>>,
mut loaded_event: EventReader<AssetEvent<LoadedFolder>>,
) {
for event in loaded_event.read() {
if let AssetEvent::LoadedWithDependencies { id } = event {
if let Some(folder) = folders.get(*id) {
warn!("Folder items: {:?}", folder.handles);
if let Some(source) = folder.handles.first() {
commands.spawn(AudioBundle {
source: source.clone().typed::<AudioSource>(),
settings: PlaybackSettings::LOOP,
});
}
}
}
}
}
```
---------
Co-authored-by: Kanabenki <lucien.menassol@gmail.com>
Co-authored-by: François Mockers <francois.mockers@vleue.com>
# Objective
The primary motivation behind this PR is to (partially?) address the
limitations imposed by the recently added `AsyncSeek` trait bound
discussed in issue #12880. While the `AsyncSeek` trait add some
flexibility to the reader, it inadvertently restricts the ability to
write asset readers that can truly stream bytes, particularly in
scenarios like HTTP requests where backward seeking is not supported. It
is also challenging in contexts where assets are stored in compressed
formats or require other kinds of transformations.
The logic behind this change is that currently, with `AsyncSeek`, an
asset Reader based on streamed data will either 1) fail silently, 2)
return an error, or 3) use a buffer to satisfy the trait constraint. I
believe that being able to advance in the file without having to "read"
it is a good thing. The only issue here is the ability to seek backward.
It is highly likely that in this context, we only need to seek forward
in the file because we would have already read an entry table upstream
and just want to access one or more resources further in the file. I
understand that in some cases, this may not be applicable, but I think
it is more beneficial not to constrain `Reader`s that want to stream
than to allow "Assets" to read files in a completely arbitrary order.
## Solution
Replace the current `AsyncSeek` trait with `AsyncSeekForward` on asset
`Reader`
## Changelog
- Introduced a new custom trait, `AsyncSeekForward`, for the asset
Reader.
- Replaced the current `AsyncSeek` trait with `AsyncSeekForward` for all
asset `Reader` implementations.
## Migration Guide
Replace all instances of `AsyncSeek` with `AsyncSeekForward` in your
asset reader implementations.
# Objective
Another step in the migration to required components: lights!
Note that this does not include `EnvironmentMapLight` or reflection
probes yet, because their API hasn't been fully chosen yet.
## Solution
As per the [selected
proposals](https://hackmd.io/@bevy/required_components/%2FLLnzwz9XTxiD7i2jiUXkJg):
- Deprecate `PointLightBundle` in favor of the `PointLight` component
- Deprecate `SpotLightBundle` in favor of the `PointLight` component
- Deprecate `DirectionalLightBundle` in favor of the `DirectionalLight`
component
## Testing
I ran some examples with lights.
---
## Migration Guide
`PointLightBundle`, `SpotLightBundle`, and `DirectionalLightBundle` have
been deprecated. Use the `PointLight`, `SpotLight`, and
`DirectionalLight` components instead. Adding them will now insert the
other components required by them automatically.
# Objective
Fixes#15540
End-users risk using `World::flush_commands` instead of `World::flush`,
which panics if any queued commands are `spawn`. Hiding
`World::flush_commands` would help avoid calling a potentially panicky
function, and helps alleviate end-user API confusion.
## Solution
This PR updates the function visibility to crate-level, like
`World::flush_entities`, hiding it from the end-user while still making
it accessible for the tests that are currently set up.
## Testing
The change was tested by executing the available tests for `bevy_ecs`.
From what I've gathered, `World::flush_commands` is not used in any
other bevy crate. If further testing is recommended, please inform me!
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Fixes#15541
A bunch of lifetimes were added during the Assets V2 rework, but after
moving to async traits in #12550 they can be elided. That PR mentions
that this might be the case, but apparently it wasn't followed up on at
the time.
~~I ended up grepping for `<'a` and finding a similar case in
`bevy_reflect` which I also fixed.~~ (edit: that one was needed
apparently)
Note that elided lifetimes are unstable in `impl Trait`. If that gets
stabilized then we can elide even more.
## Solution
Remove the extra lifetimes.
## Testing
Everything still compiles. If I have messed something up there is a
small risk that some user code stops compiling, but all the examples
still work at least.
---
## Migration Guide
The traits `AssetLoader`, `AssetSaver` and `Process` traits from
`bevy_asset` now use elided lifetimes. If you implement these then
remove the named lifetime.
# Objective
This PR extends and reworks the material from #15282 by allowing
arbitrary curves to be used by the animation system to animate arbitrary
properties. The goals of this work are to:
- Allow far greater flexibility in how animations are allowed to be
defined in order to be used with `bevy_animation`.
- Delegate responsibility over keyframe interpolation to `bevy_math` and
the `Curve` libraries and reduce reliance on keyframes in animation
definitions generally.
- Move away from allowing the glTF spec to completely define animations
on a mechanical level.
## Solution
### Overview
At a high level, curves have been incorporated into the animation system
using the `AnimationCurve` trait (closely related to what was
`Keyframes`). From the top down:
1. In `animate_targets`, animations are driven by `VariableCurve`, which
is now a thin wrapper around a `Box<dyn AnimationCurve>`.
2. `AnimationCurve` is something built out of a `Curve`, and it tells
the animation system how to use the curve's output to actually mutate
component properties. The trait looks like this:
```rust
/// A low-level trait that provides control over how curves are actually applied to entities
/// by the animation system.
///
/// Typically, this will not need to be implemented manually, since it is automatically
/// implemented by [`AnimatableCurve`] and other curves used by the animation system
/// (e.g. those that animate parts of transforms or morph weights). However, this can be
/// implemented manually when `AnimatableCurve` is not sufficiently expressive.
///
/// In many respects, this behaves like a type-erased form of [`Curve`], where the output
/// type of the curve is remembered only in the components that are mutated in the
/// implementation of [`apply`].
///
/// [`apply`]: AnimationCurve::apply
pub trait AnimationCurve: Reflect + Debug + Send + Sync {
/// Returns a boxed clone of this value.
fn clone_value(&self) -> Box<dyn AnimationCurve>;
/// The range of times for which this animation is defined.
fn domain(&self) -> Interval;
/// Write the value of sampling this curve at time `t` into `transform` or `entity`,
/// as appropriate, interpolating between the existing value and the sampled value
/// using the given `weight`.
fn apply<'a>(
&self,
t: f32,
transform: Option<Mut<'a, Transform>>,
entity: EntityMutExcept<'a, (Transform, AnimationPlayer, Handle<AnimationGraph>)>,
weight: f32,
) -> Result<(), AnimationEvaluationError>;
}
```
3. The conversion process from a `Curve` to an `AnimationCurve` involves
using wrappers which communicate the intent to animate a particular
property. For example, here is `TranslationCurve`, which wraps a
`Curve<Vec3>` and uses it to animate `Transform::translation`:
```rust
/// This type allows a curve valued in `Vec3` to become an [`AnimationCurve`] that animates
/// the translation component of a transform.
pub struct TranslationCurve<C>(pub C);
```
### Animatable Properties
The `AnimatableProperty` trait survives in the transition, and it can be
used to allow curves to animate arbitrary component properties. The
updated documentation for `AnimatableProperty` explains this process:
<details>
<summary>Expand AnimatableProperty example</summary
An `AnimatableProperty` is a value on a component that Bevy can animate.
You can implement this trait on a unit struct in order to support
animating
custom components other than transforms and morph weights. Use that type
in
conjunction with `AnimatableCurve` (and perhaps
`AnimatableKeyframeCurve`
to define the animation itself). For example, in order to animate font
size of a
text section from 24 pt. to 80 pt., you might use:
```rust
#[derive(Reflect)]
struct FontSizeProperty;
impl AnimatableProperty for FontSizeProperty {
type Component = Text;
type Property = f32;
fn get_mut(component: &mut Self::Component) -> Option<&mut Self::Property> {
Some(&mut component.sections.get_mut(0)?.style.font_size)
}
}
```
You can then create an `AnimationClip` to animate this property like so:
```rust
let mut animation_clip = AnimationClip::default();
animation_clip.add_curve_to_target(
animation_target_id,
AnimatableKeyframeCurve::new(
[
(0.0, 24.0),
(1.0, 80.0),
]
)
.map(AnimatableCurve::<FontSizeProperty, _>::from_curve)
.expect("Failed to create font size curve")
);
```
Here, the use of `AnimatableKeyframeCurve` creates a curve out of the
given keyframe time-value
pairs, using the `Animatable` implementation of `f32` to interpolate
between them. The
invocation of `AnimatableCurve::from_curve` with `FontSizeProperty`
indicates that the `f32`
output from that curve is to be used to animate the font size of a
`Text` component (as
configured above).
</details>
### glTF Loading
glTF animations are now loaded into `Curve` types of various kinds,
depending on what is being animated and what interpolation mode is being
used. Those types get wrapped into and converted into `Box<dyn
AnimationCurve>` and shoved inside of a `VariableCurve` just like
everybody else.
### Morph Weights
There is an `IterableCurve` abstraction which allows sampling these from
a contiguous buffer without allocating. Its only reason for existing is
that Rust disallows you from naming function types, otherwise we would
just use `Curve` with an iterator output type. (The iterator involves
`Map`, and the name of the function type would have to be able to be
named, but it is not.)
A `WeightsCurve` adaptor turns an `IterableCurve` into an
`AnimationCurve`, so it behaves like everything else in that regard.
## Testing
Tested by running existing animation examples. Interpolation logic has
had additional tests added within the `Curve` API to replace the tests
in `bevy_animation`. Some kinds of out-of-bounds errors have become
impossible.
Performance testing on `many_foxes` (`animate_targets`) suggests that
performance is very similar to the existing implementation. Here are a
couple trace histograms across different runs (yellow is this branch,
red is main).
<img width="669" alt="Screenshot 2024-09-27 at 9 41 50 AM"
src="https://github.com/user-attachments/assets/5ba4e9ac-3aea-452e-aaf8-1492acc2d7fc">
<img width="673" alt="Screenshot 2024-09-27 at 9 45 18 AM"
src="https://github.com/user-attachments/assets/8982538b-04cf-46b5-97b2-164c6bc8162e">
---
## Migration Guide
Most user code that does not directly deal with `AnimationClip` and
`VariableCurve` will not need to be changed. On the other hand,
`VariableCurve` has been completely overhauled. If you were previously
defining animation curves in code using keyframes, you will need to
migrate that code to use curve constructors instead. For example, a
rotation animation defined using keyframes and added to an animation
clip like this:
```rust
animation_clip.add_curve_to_target(
animation_target_id,
VariableCurve {
keyframe_timestamps: vec![0.0, 1.0, 2.0, 3.0, 4.0],
keyframes: Keyframes::Rotation(vec![
Quat::IDENTITY,
Quat::from_axis_angle(Vec3::Y, PI / 2.),
Quat::from_axis_angle(Vec3::Y, PI / 2. * 2.),
Quat::from_axis_angle(Vec3::Y, PI / 2. * 3.),
Quat::IDENTITY,
]),
interpolation: Interpolation::Linear,
},
);
```
would now be added like this:
```rust
animation_clip.add_curve_to_target(
animation_target_id,
AnimatableKeyframeCurve::new([0.0, 1.0, 2.0, 3.0, 4.0].into_iter().zip([
Quat::IDENTITY,
Quat::from_axis_angle(Vec3::Y, PI / 2.),
Quat::from_axis_angle(Vec3::Y, PI / 2. * 2.),
Quat::from_axis_angle(Vec3::Y, PI / 2. * 3.),
Quat::IDENTITY,
]))
.map(RotationCurve)
.expect("Failed to build rotation curve"),
);
```
Note that the interface of `AnimationClip::add_curve_to_target` has also
changed (as this example shows, if subtly), and now takes its curve
input as an `impl AnimationCurve`. If you need to add a `VariableCurve`
directly, a new method `add_variable_curve_to_target` accommodates that
(and serves as a one-to-one migration in this regard).
### For reviewers
The diff is pretty big, and the structure of some of the changes might
not be super-obvious:
- `keyframes.rs` became `animation_curves.rs`, and `AnimationCurve` is
based heavily on `Keyframes`, with the adaptors also largely following
suite.
- The Curve API adaptor structs were moved from `bevy_math::curve::mod`
into their own module `adaptors`. There are no functional changes to how
these adaptors work; this is just to make room for the specialized
reflection implementations since `mod.rs` was getting kind of cramped.
- The new module `gltf_curves` holds the additional curve constructions
that are needed by the glTF loader. Note that the loader uses a mix of
these and off-the-shelf `bevy_math` curve stuff.
- `animatable.rs` no longer holds logic related to keyframe
interpolation, which is now delegated to the existing abstractions in
`bevy_math::curve::cores`.
---------
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
Co-authored-by: aecsocket <43144841+aecsocket@users.noreply.github.com>
# Objective
Fixes#15367.
Currently, required components can only be defined through the `require`
macro attribute. While this should be used in most cases, there are also
several instances where you may want to define requirements at runtime,
commonly in plugins.
Example use cases:
- Require components only if the relevant optional plugins are enabled.
For example, a `SleepTimer` component (for physics) is only relevant if
the `SleepPlugin` is enabled.
- Third party crates can define their own requirements for first party
types. For example, "each `Handle<Mesh>` should require my custom
rendering data components". This also gets around the orphan rule.
- Generic plugins that add marker components based on the existence of
other components, like a generic `ColliderPlugin<C: AnyCollider>` that
wants to add a `ColliderMarker` component for all types of colliders.
- This is currently relevant for the retained render world in #15320.
The `ExtractComponentPlugin<C>` should add `SyncToRenderWorld` to all
components that should be extracted. This is currently done with
observers, which is more expensive than required components, and causes
archetype moves.
- Replace some built-in components with custom versions. For example, if
`GlobalTransform` required `Transform` through `TransformPlugin`, but we
wanted to use a `CustomTransform` type, we could replace
`TransformPlugin` with our own plugin. (This specific example isn't
good, but there are likely better use cases where this may be useful)
See #15367 for more in-depth reasoning.
## Solution
Add `register_required_components::<T, R>` and
`register_required_components_with::<T, R>` methods for `Default` and
custom constructors respectively. These methods exist on `App` and
`World`.
```rust
struct BirdPlugin;
impl Plugin for BirdPlugin {
fn plugin(app: &mut App) {
// Make `Bird` require `Wings` with a `Default` constructor.
app.register_required_components::<Bird, Wings>();
// Make `Wings` require `FlapSpeed` with a custom constructor.
// Fun fact: Some hummingbirds can flutter their wings 80 times per second!
app.register_required_components_with::<Wings, FlapSpeed>(|| FlapSpeed::from_duration(1.0 / 80.0));
}
}
```
The custom constructor is a function pointer to match the `require` API,
though it could take a raw value too.
Requirement inheritance works similarly as with the `require` attribute.
If `Bird` required `FlapSpeed` directly, it would take precedence over
indirectly requiring it through `Wings`. The same logic applies to all
levels of the inheritance tree.
Note that registering the same component requirement more than once will
panic, similarly to trying to add multiple component hooks of the same
type to the same component. This avoids constructor conflicts and
confusing ordering issues.
### Implementation
Runtime requirements have two additional challenges in comparison to the
`require` attribute.
1. The `require` attribute uses recursion and macros with clever
ordering to populate hash maps of required components for each component
type. The expected semantics are that "more specific" requirements
override ones deeper in the inheritance tree. However, at runtime, there
is no representation of how "specific" each requirement is.
2. If you first register the requirement `X -> Y`, and later register `Y
-> Z`, then `X` should also indirectly require `Z`. However, `Y` itself
doesn't know that it is required by `X`, so it's not aware that it
should update the list of required components for `X`.
My solutions to these problems are:
1. Store the depth in the inheritance tree for each entry of a given
component's `RequiredComponents`. This is used to determine how
"specific" each requirement is. For `require`-based registration, these
depths are computed as part of the recursion.
2. Store and maintain a `required_by` list in each component's
`ComponentInfo`, next to `required_components`. For `require`-based
registration, these are also added after each registration, as part of
the recursion.
When calling `register_required_components`, it works as follows:
1. Get the required components of `Foo`, and check that `Bar` isn't
already a *direct* requirement.
3. Register `Bar` as a required component for `Foo`, and add `Foo` to
the `required_by` list for `Bar`.
4. Find and register all indirect requirements inherited from `Bar`,
adding `Foo` to the `required_by` list for each component.
5. Iterate through components that require `Foo`, registering the new
inherited requires for them as indirect requirements.
The runtime registration is likely slightly more expensive than the
`require` version, but it is a one-time cost, and quite negligible in
practice, unless projects have hundreds or thousands of runtime
requirements. I have not benchmarked this however.
This does also add a small amount of extra cost to the `require`
attribute for updating `required_by` lists, but I expect it to be very
minor.
## Testing
I added some tests that are copies of the `require` versions, as well as
some tests that are more specific to the runtime implementation. I might
add a few more tests though.
## Discussion
- Is `register_required_components` a good name? Originally I went for
`register_component_requirement` to be consistent with
`register_component_hooks`, but the general feature is often referred to
as "required components", which is why I changed it to
`register_required_components`.
- Should we *not* panic for duplicate requirements? If so, should they
just be ignored, or should the latest registration overwrite earlier
ones?
- If we do want to panic for duplicate, conflicting registrations,
should we at least not panic if the registrations are *exactly* the
same, i.e. same component and same constructor? The current
implementation panics for all duplicate direct registrations regardless
of the constructor.
## Next Steps
- Allow `register_required_components` to take a `Bundle` instead of a
single required component.
- I could also try to do it in this PR if that would be preferable.
- Not directly related, but archetype invariants?
- Adopted from #14449
- Still fixes#12144.
## Migration Guide
The retained render world is a complex change: migrating might take one
of a few different forms depending on the patterns you're using.
For every example, we specify in which world the code is run. Most of
the changes affect render world code, so for the average Bevy user who's
using Bevy's high-level rendering APIs, these changes are unlikely to
affect your code.
### Spawning entities in the render world
Previously, if you spawned an entity with `world.spawn(...)`,
`commands.spawn(...)` or some other method in the rendering world, it
would be despawned at the end of each frame. In 0.15, this is no longer
the case and so your old code could leak entities. This can be mitigated
by either re-architecting your code to no longer continuously spawn
entities (like you're used to in the main world), or by adding the
`bevy_render::world_sync::TemporaryRenderEntity` component to the entity
you're spawning. Entities tagged with `TemporaryRenderEntity` will be
removed at the end of each frame (like before).
### Extract components with `ExtractComponentPlugin`
```
// main world
app.add_plugins(ExtractComponentPlugin::<ComponentToExtract>::default());
```
`ExtractComponentPlugin` has been changed to only work with synced
entities. Entities are automatically synced if `ComponentToExtract` is
added to them. However, entities are not "unsynced" if any given
`ComponentToExtract` is removed, because an entity may have multiple
components to extract. This would cause the other components to no
longer get extracted because the entity is not synced.
So be careful when only removing extracted components from entities in
the render world, because it might leave an entity behind in the render
world. The solution here is to avoid only removing extracted components
and instead despawn the entire entity.
### Manual extraction using `Extract<Query<(Entity, ...)>>`
```rust
// in render world, inspired by bevy_pbr/src/cluster/mod.rs
pub fn extract_clusters(
mut commands: Commands,
views: Extract<Query<(Entity, &Clusters, &Camera)>>,
) {
for (entity, clusters, camera) in &views {
// some code
commands.get_or_spawn(entity).insert(...);
}
}
```
One of the primary consequences of the retained rendering world is that
there's no longer a one-to-one mapping from entity IDs in the main world
to entity IDs in the render world. Unlike in Bevy 0.14, Entity 42 in the
main world doesn't necessarily map to entity 42 in the render world.
Previous code which called `get_or_spawn(main_world_entity)` in the
render world (`Extract<Query<(Entity, ...)>>` returns main world
entities). Instead, you should use `&RenderEntity` and
`render_entity.id()` to get the correct entity in the render world. Note
that this entity does need to be synced first in order to have a
`RenderEntity`.
When performing manual abstraction, this won't happen automatically
(like with `ExtractComponentPlugin`) so add a `SyncToRenderWorld` marker
component to the entities you want to extract.
This results in the following code:
```rust
// in render world, inspired by bevy_pbr/src/cluster/mod.rs
pub fn extract_clusters(
mut commands: Commands,
views: Extract<Query<(&RenderEntity, &Clusters, &Camera)>>,
) {
for (render_entity, clusters, camera) in &views {
// some code
commands.get_or_spawn(render_entity.id()).insert(...);
}
}
// in main world, when spawning
world.spawn(Clusters::default(), Camera::default(), SyncToRenderWorld)
```
### Looking up `Entity` ids in the render world
As previously stated, there's now no correspondence between main world
and render world `Entity` identifiers.
Querying for `Entity` in the render world will return the `Entity` id in
the render world: query for `MainEntity` (and use its `id()` method) to
get the corresponding entity in the main world.
This is also a good way to tell the difference between synced and
unsynced entities in the render world, because unsynced entities won't
have a `MainEntity` component.
---------
Co-authored-by: re0312 <re0312@outlook.com>
Co-authored-by: re0312 <45868716+re0312@users.noreply.github.com>
Co-authored-by: Periwink <charlesbour@gmail.com>
Co-authored-by: Anselmo Sampietro <ans.samp@gmail.com>
Co-authored-by: Emerson Coskey <56370779+ecoskey@users.noreply.github.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Christian Hughes <9044780+ItsDoot@users.noreply.github.com>
# Objective
Unlike `Capsule3d` which has the `.to_cylinder` method, `Capsule2d`
doesn't have an equivalent `.to_inner_rectangle` method and as shown by
#15191 this is surprisingly easy to get wrong
## Solution
Implemented a `Capsule2d::to_inner_rectangle` method as it is
implemented in the fixed `Capsule2d` shape sampling, and as I was adding
tests I noticed `Capsule2d` didn't implement `Measure2d` so I did this
as well.
## Changelog
### Added
- `Capsule2d::to_inner_rectangle`, `Capsule2d::area` and
`Capsule2d::perimeter`
---------
Co-authored-by: Joona Aalto <jondolf.dev@gmail.com>
Co-authored-by: James Liu <contact@jamessliu.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
`ui_stack_system` generates a tree of `StackingContexts` which it then
flattens to get the `UiStack`.
But there's no need to construct a new tree. We can query for nodes with
a global `ZIndex`, add those nodes to the root nodes list and then build
the `UiStack` from a walk of the existing layout tree, ignoring any
branches that have a global `Zindex`.
Fixes#9877
## Solution
Split the `ZIndex` enum into two separate components, `ZIndex` and
`GlobalZIndex`
Query for nodes with a `GlobalZIndex`, add those nodes to the root nodes
list and then build the `UiStack` from a walk of the existing layout
tree, filtering branches by `Without<GlobalZIndex>` so we don't revisit
nodes.
```
cargo run --profile stress-test --features trace_tracy --example many_buttons
```
<img width="672" alt="ui-stack-system-walk-split-enum"
src="https://github.com/bevyengine/bevy/assets/27962798/11e357a5-477f-4804-8ada-c4527c009421">
(Yellow is this PR, red is main)
---
## Changelog
`Zindex`
* The `ZIndex` enum has been split into two separate components `ZIndex`
(which replaces `ZIndex::Local`) and `GlobalZIndex` (which replaces
`ZIndex::Global`). An entity can have both a `ZIndex` and
`GlobalZIndex`, in comparisons `ZIndex` breaks ties if two
`GlobalZIndex` values are equal.
`ui_stack_system`
* Instead of generating a tree of `StackingContexts`, query for nodes
with a `GlobalZIndex`, add those nodes to the root nodes list and then
build the `UiStack` from a walk of the existing layout tree, filtering
branches by `Without<GlobalZIndex` so we don't revisit nodes.
## Migration Guide
The `ZIndex` enum has been split into two separate components `ZIndex`
(which replaces `ZIndex::Local`) and `GlobalZIndex` (which replaces
`ZIndex::Global`). An entity can have both a `ZIndex` and
`GlobalZIndex`, in comparisons `ZIndex` breaks ties if two
`GlobalZindex` values are equal.
---------
Co-authored-by: Gabriel Bourgeois <gabriel.bourgeoisv4si@gmail.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: UkoeHB <37489173+UkoeHB@users.noreply.github.com>
(Note: #15434 implements something very similar to this for functional
curve adaptors, which is why they aren't present in this PR.)
# Objective
Previously, there was basically no chance that the
explicitly-interpolating sample curve structs from the `Curve` API would
actually be `Reflect`. The reason for this is functional programming:
the structs contain an explicit interpolation `I: Fn(&T, &T, f32) -> T`
which, under typical circumstances, will never be `Reflect`, which
prevents the derive from realistically succeeding. In fact, they won't
be a lot of other things either, notably including both`Debug` and
`TypePath`, which are also required for reflection to succeed.
The goal of this PR is to weaken the implementations of reflection
traits for these structs so that they can implement `Reflect` under
reasonable circumstances. (Notably, they will still not be
`FromReflect`, which is unavoidable.)
## Solution
The function fields are marked as `#[reflect(ignore)]`, and the derive
macro for `Reflect` has `FromReflect` disabled. (This is not fully
optimal, but we don't presently have any kind of "read-only" attribute
for these fields.) Additionally, these structs receive custom `Debug`
and `TypePath` implementations that display the function's (unstable!)
type name instead of its value or type path (respectively). In the case
of `TypePath`, this is a bit janky, but the instability of `type_name`
won't generally present an issue for generics, which would have to be
registered manually in the type registry anyway, which is impossible
because the function type parameters cannot be named.
(And in general, the "blessed" route for such cases would generally
involve manually monomorphizing the function parameter away, which also
allows access to `FromReflect` etc. through very ordinary use of the
derive macro.)
## Testing
Tests in the new `bevy_math::curve::sample_curves` module guarantee that
these are actually `Reflect` under reasonable circumstances.
---
## Future changes
If and when function item types become `Default`, these types will need
to receive custom `FromReflect` implementations that exploit it. Such a
custom implementation would also be desirable if users start doing
things like wrapping function items in `Default`/`FromReflect` wrappers
that still implement a `Fn` trait.
Additionally, if function types become nameable in user-space, the
stance on `Debug`/`TypePath` may bear reexamination, since partial
monomorphization through wrappers would make implementing reflect traits
for function types potentially more viable.
---------
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
# Objective
Fix#12273
## Solution
– Only emit `KeyboardFocusLost` when the keyboard focus is lost
– ignore synthetic key releases too, not just key presses (as they're
already covered by `KeyboardFocusLost`)
---
## Changelog
### Fixed
- Don't trigger `ButtonInput<KeyCode>::just_pressed`/`just_released`
when spawning a window/focus moving between Bevy windows
# Objective
- Contributes to #15460
- Allows `bevy_mikktspace` to be used in `no_std` contexts.
## Solution
- Added `std` (default) and `libm` features which control the inclusion
of the standard library. To use `bevy_mikktspace` in `no_std`
environments, enable the `libm` feature.
## Testing
- CI
- `cargo clippy -p bevy_mikktspace --target "x86_64-unknown-none"
--no-default-features --features libm`
# Objective
Add a `Populated` system parameter that acts like `Query`, but prevents
system from running if there are no matching entities.
Fixes: #15302
## Solution
Implement the system param which newtypes the `Query`.
The only change is new validation, which fails if query is empty.
The new system param is used in `fallible_params` example.
## Testing
Ran `fallible_params` example.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Currently, reflecting a generic type provides no information about the
generic parameters. This means that you can't get access to the type of
`T` in `Foo<T>` without creating custom type data (we do this for
[`ReflectHandle`](https://docs.rs/bevy/0.14.2/bevy/asset/struct.ReflectHandle.html#method.asset_type_id)).
## Solution
This PR makes it so that generic type parameters and generic const
parameters are tracked in a `Generics` struct stored on the `TypeInfo`
for a type.
For example, `struct Foo<T, const N: usize>` will store `T` and `N` as a
`TypeParamInfo` and `ConstParamInfo`, respectively.
The stored information includes:
- The name of the generic parameter (i.e. `T`, `N`, etc.)
- The type of the generic parameter (remember that we're dealing with
monomorphized types, so this will actually be a concrete type)
- The default type/value, if any (e.g. `f32` in `T = f32` or `10` in
`const N: usize = 10`)
### Caveats
The only requirement for this to work is that the user does not opt-out
of the automatic `TypePath` derive with `#[reflect(type_path = false)]`.
Doing so prevents the macro code from 100% knowing that the generic type
implements `TypePath`. This in turn means the generated `Typed` impl
can't add generics to the type.
There are two solutions for this—both of which I think we should explore
in a future PR:
1. We could just not use `TypePath`. This would mean that we can't store
the `Type` of the generic, but we can at least store the `TypeId`.
2. We could provide a way to opt out of the automatic `Typed` derive
with a `#[reflect(typed = false)]` attribute. This would allow users to
manually implement `Typed` to add whatever generic information they need
(e.g. skipping a parameter that can't implement `TypePath` while the
rest can).
I originally thought about making `Generics` an enum with `Generic`,
`NonGeneric`, and `Unavailable` variants to signify whether there are
generics, no generics, or generics that cannot be added due to opting
out of `TypePath`. I ultimately decided against this as I think it adds
a bit too much complexity for such an uncommon problem.
Additionally, user's don't necessarily _have_ to know the generics of a
type, so just skipping them should generally be fine for now.
## Testing
You can test locally by running:
```
cargo test --package bevy_reflect
```
---
## Showcase
You can now access generic parameters via `TypeInfo`!
```rust
#[derive(Reflect)]
struct MyStruct<T, const N: usize>([T; N]);
let generics = MyStruct::<f32, 10>::type_info().generics();
// Get by index:
let t = generics.get(0).unwrap();
assert_eq!(t.name(), "T");
assert!(t.ty().is::<f32>());
assert!(!t.is_const());
// Or by name:
let n = generics.get_named("N").unwrap();
assert_eq!(n.name(), "N");
assert!(n.ty().is::<usize>());
assert!(n.is_const());
```
You can even access parameter defaults:
```rust
#[derive(Reflect)]
struct MyStruct<T = String, const N: usize = 10>([T; N]);
let generics = MyStruct::<f32, 5>::type_info().generics();
let GenericInfo::Type(info) = generics.get_named("T").unwrap() else {
panic!("expected a type parameter");
};
let default = info.default().unwrap();
assert!(default.is::<String>());
let GenericInfo::Const(info) = generics.get_named("N").unwrap() else {
panic!("expected a const parameter");
};
let default = info.default().unwrap();
assert_eq!(default.downcast_ref::<usize>().unwrap(), &10);
```
# Objective
We introduced the fancy Curve API earlier in this version. The goal of
this PR is to provide a level of integration between that API and the
existing spline constructions in `bevy_math`.
Note that this PR only covers the integration of position-sampling via
the `Curve` API. Other (substantially more complex) planned work will
introduce general facilities for handling derivatives.
## Solution
`CubicSegment`, `CubicCurve`, `RationalSegment`, and `RationalCurve` all
now implement `Curve`, using their `position` function to sample the
output.
Additionally, some documentation has been updated/corrected, and
`Serialize`/`Deserialize` derives have been added for all the curve
structs. (Note that there are some barriers to automatic registration of
`ReflectSerialize`/`ReflectSerialize` involving generics that have not
been resolved in this PR.)
---
## Migration Guide
The `RationalCurve::domain` method has been renamed to
`RationalCurve::length`. Calling `.domain()` on a `RationalCurve` now
returns its entire domain as an `Interval`.
# Objective
* Remove all uses of render_resource_wrapper.
* Make it easier to share a `wgpu::Device` between Bevy and application
code.
## Solution
Removed the `render_resource_wrapper` macro.
To improve the `RenderCreation:: Manual ` API, `ErasedRenderDevice` was
replaced by `Arc`. Unfortunately I had to introduce one more usage of
`WgpuWrapper` which seems like an unwanted constraint on the caller.
## Testing
- Did you test these changes? If so, how?
- Ran `cargo test`.
- Ran a few examples.
- Used `RenderCreation::Manual` in my own project
- Exercised `RenderCreation::Automatic` through examples
- Are there any parts that need more testing?
- No
- How can other people (reviewers) test your changes? Is there anything
specific they need to know?
- Run examples
- Use `RenderCreation::Manual` in their own project
# Objective
- Provide a generic and _reflectable_ way to iterate over contained
entities
## Solution
Adds two new traits:
* `VisitEntities`: Reflectable iteration, accepts a closure rather than
producing an iterator. Implemented by default for `IntoIterator`
implementing types. A proc macro is also provided.
* A `Mut` variant of the above. Its derive macro uses the same field
attribute to avoid repetition.
## Testing
Added a test for `VisitEntities` that also transitively tests its derive
macro as well as the default `MapEntities` impl.
# Objective
Adds a new `Readback` component to request for readback of a
`Handle<Image>` or `Handle<ShaderStorageBuffer>` to the CPU in a future
frame.
## Solution
We track the `Readback` component and allocate a target buffer to write
the gpu resource into and map it back asynchronously, which then fires a
trigger on the entity in the main world. This proccess is asynchronous,
and generally takes a few frames.
## Showcase
```rust
let mut buffer = ShaderStorageBuffer::from(vec![0u32; 16]);
buffer.buffer_description.usage |= BufferUsages::COPY_SRC;
let buffer = buffers.add(buffer);
commands
.spawn(Readback::buffer(buffer.clone()))
.observe(|trigger: Trigger<ReadbackComplete>| {
info!("Buffer data from previous frame {:?}", trigger.event());
});
```
---------
Co-authored-by: Kristoffer Søholm <k.soeholm@gmail.com>
Co-authored-by: IceSentry <IceSentry@users.noreply.github.com>
# Objective
`World::flush_commands` will cause a panic with `error[B0003]: Could not
insert a bundle [...] for entity [...] because it doesn't exist in this
World` if there was a `spawn` command in the queue and you should
instead use `flush` for this but this isn't mentioned in the docs
## Solution
Add a note to the docs suggesting to use `World::flush` in this context.
This error doesn't appear to happen with `spawn_batch` so I didn't add
that to the note although you can cause it with
`commands.spawn_empty().insert(...)` but I wasn't sure that was worth
the documentation complexity as it is pretty unlikely (and equivalent to
`commands.spawn(...)`.
# Objective
Fixes#15185.
# Solution
Change `drain` to take a `&mut self` for most reflected types.
Some notable exceptions to this change are `Array` and `Tuple`. These
types don't make sense with `drain` taking a mutable borrow since they
can't get "smaller". Also `BTreeMap` doesn't have a `drain` function, so
we have to pop elements off one at a time.
## Testing
- The existing tests are sufficient.
---
## Migration Guide
- `reflect::Map`, `reflect::List`, and `reflect::Set` all now take a
`&mut self` instead of a `Box<Self>`. Callers of these traits should add
`&mut` before their boxes, and implementers of these traits should
update to match.
# Objective
Mostly covers the first point in
https://github.com/bevyengine/bevy/issues/13713#issuecomment-2364786694
The idea here is that a lot of people want to load their own texture
atlases, and many of them do this by deserializing some custom version
of `TextureAtlasLayout`. This makes that a little easier by providing
`serde` impls for them.
## Solution
In order to make `TextureAtlasLayout` serializable, the custom texture
mappings that are added by `TextureAtlasBuilder` were separated into
their own type, `TextureAtlasSources`. The inner fields are made public
so people can create their own version of this type, although because it
embeds asset IDs, it's not as easily serializable. In particular,
atlases that are loaded directly (e.g. sprite sheets) will not have a
copy of this map, and so, don't need to construct it at all.
As an aside, since this is the very first thing in `bevy_sprite` with
`serde` impls, I've added a `serialize` feature to the crate and made
sure it gets activated when the `serialize` feature is enabled on the
parent `bevy` crate.
## Testing
I was kind of shocked that there isn't anywhere in the code besides a
single example that actually used this functionality, so, it was
relatively straightforward to do.
In #13713, among other places, folks have mentioned adding custom
serialization into their pipelines. It would be nice to hear from people
whether this change matches what they're doing in their code, and if
it's relatively seamless to adapt to. I suspect that the answer is yes,
but, that's mainly the only other kind of testing that can be added.
## Migration Guide
`TextureAtlasBuilder` no longer stores a mapping back to the original
images in `TextureAtlasLayout`; that functionality has been added to a
new struct, `TextureAtlasSources`, instead. This also means that the
signature for `TextureAtlasBuilder::finish` has changed, meaning that
calls of the form:
```rust
let (atlas_layout, image) = builder.build()?;
```
Will now change to the form:
```rust
let (atlas_layout, atlas_sources, image) = builder.build()?;
```
And instead of performing a reverse-lookup from the layout, like so:
```rust
let atlas_layout_handle = texture_atlases.add(atlas_layout.clone());
let index = atlas_layout.get_texture_index(&my_handle);
let handle = TextureAtlas {
layout: atlas_layout_handle,
index,
};
```
You can perform the lookup from the sources instead:
```rust
let atlas_layout = texture_atlases.add(atlas_layout);
let index = atlas_sources.get_texture_index(&my_handle);
let handle = TextureAtlas {
layout: atlas_layout,
index,
};
```
Additionally, `TextureAtlasSources` also has a convenience method,
`handle`, which directly combines the index and an existing
`TextureAtlasLayout` handle into a new `TextureAtlas`:
```rust
let atlas_layout = texture_atlases.add(atlas_layout);
let handle = atlas_sources.handle(atlas_layout, &my_handle);
```
## Extra notes
In the future, it might make sense to combine the three types returned
by `TextureAtlasBuilder` into their own struct, just so that people
don't need to assign variable names to all three parts. In particular,
when creating a version that can be loaded directly (like #11873), we
could probably use this new type.
# Objective
- Fix panic when atlas index is out of bounds
- Took the chance to clean it up a bit
## Solution
- Use texture dimensions like rendering pipeline. Dropped atlas layouts
and indexes out of bounds are shown as a sprite.
## Testing
Used sprite_picking example, drop layout and/or use indexes out of
bounds.
# Objective
- `DynamicMap` currently uses an `HashMap` from a `u64` hash to the
entry index in a `Vec`. This is incorrect in the presence of hash
collisions, so let's fix it;
- `DynamicMap::remove` was also buggy, as it didn't fix up the indexes
of the other elements after removal. Fix that up as well and add a
regression test.
## Solution
- Use `HashTable` in `DynamicMap` to distinguish entries that have the
same hash by using `reflect_partial_eq`, bringing it more in line with
what `DynamicSet` does;
- Reimplement `DynamicMap::remove` to properly fix up the index of moved
elements after the removal.
## Testing
- A regression test was added for the `DynamicMap::remove` issue.
---
Some kinda related considerations: the use of a separate `Vec` for
storing the entries adds some complications that I'm not sure are worth.
This is mainly used to implement an efficient `get_at`, which is relied
upon by `MapIter`. However both `HashMap` and `BTreeMap` implement
`get_at` inefficiently (and cannot do so efficiently), leading to a
`O(N^2)` complexity for iterating them. This could be removed in favor
of a `Box<dyn Iterator>` like it's done in `DynamicSet`.
# Objective
Improve the documentation of `SystemParamBuilder`. Not all builder types
have documentation, and the documentation is spread around and not
linked together well.
## Solution
Reorganize `SystemParamBuilder` docs and examples. All builder types now
have their own examples, and the list of builder types is linked from
the `SystemParamBuilder` trait. Add some examples to `FilteredEntityRef`
and `FilteredEntityMut` so that `QueryParamBuilder` can reference them.
# Objective
- Fixes#15077
## Solution
- Clears `ViewTargetAttachments` resource every frame before
`create_surfaces` system instead, which was previously done after
`extract_windows`.
## Testing
- Confirmed that examples no longer panic on window resizing with DX12
backend.
- `screenshot` example keeps working after this change.
# Objective
This implements another item on the way to complete the `Curves`
implementation initiative
Citing @mweatherley
> Curve adaptors for making a curve repeat or ping-pong would be useful.
This adds three widely applicable adaptors:
- `ReverseCurve` "plays" the curve backwards
- `RepeatCurve` to repeat the curve for `n` times where `n` in `[0,inf)`
- `ForeverCurve` which extends the curves domain to `EVERYWHERE`
- `PingPongCurve` (name wip (?)) to chain the curve with it's reverse.
This would be achievable with `ReverseCurve` and `ChainCurve`, but it
would require the use of `by_ref` which can be restrictive in some
scenarios where you'd rather just consume the curve. Users can still
create the same effect by combination of the former two, but since this
will be most likely a very typical adaptor we should also provide it on
the library level. (Why it's typical: you can create a single period of
common waves with it pretty easily, think square wave (= pingpong +
step), triangle wave ( = pingpong + linear), etc.)
- `ContinuationCurve` which chains two curves but also makes sure that
the samples of the second curve are translated so that
`sample(first.end) == sample(second.start)`
## Solution
Implement the adaptors above. (More suggestions are welcome!)
## Testing
- [x] add simple tests. One per adaptor
---------
Co-authored-by: eckz <567737+eckz@users.noreply.github.com>
Co-authored-by: Matty <2975848+mweatherley@users.noreply.github.com>
Co-authored-by: IQuick 143 <IQuick143cz@gmail.com>
Co-authored-by: Matty <weatherleymatthew@gmail.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- fixes https://github.com/bevyengine/bevy/issues/13473
## Solution
- When a single mesh is assigned multiple materials, it is divided into
several primitive nodes, with each primitive assigned a unique material.
Presently, these primitives are named using the format Mesh.index, which
complicates querying. To improve this, we can assign a specific name to
each primitive based on the material’s name, since each primitive
corresponds to one material exclusively.
## Testing
- I have included a simple example which shows how to query a material
and mesh part based on the new name component.
## Changelog
- adds `GltfMaterialName` component to the mesh entity of the gltf
primitive node.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Fixes#15394
## Solution
Observers now validate params.
System registry has a new error variant for when system running fails
due to invalid parameters.
Run once now returns a `Result<Out, RunOnceError>` instead of `Out`.
This is more inline with system registry, which also returns a result.
I'll address warning messages in #15500.
## Testing
Added one test for each case.
---
## Migration Guide
- `RunSystemOnce::run_system_once` and
`RunSystemOnce::run_system_once_with` now return a `Result<Out>` instead
of just `Out`
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Zachary Harrold <zac@harrold.com.au>
* Save 16 bytes per vertex by calculating tangents in the shader at
runtime, rather than storing them in the vertex data.
* Based on https://jcgt.org/published/0009/03/04,
https://www.jeremyong.com/graphics/2023/12/16/surface-gradient-bump-mapping.
* Fixed visbuffer resolve to use the updated algorithm that flips ddy
correctly
* Added some more docs about meshlet material limitations, and some
TODOs about transforming UV coordinates for the future.
For testing add a normal map to the bunnies with StandardMaterial like
below, and then test that on both main and this PR (make sure to
download the correct bunny for each). Results should be mostly
identical.
```rust
normal_map_texture: Some(asset_server.load_with_settings(
"textures/BlueNoise-Normal.png",
|settings: &mut ImageLoaderSettings| settings.is_srgb = false,
)),
```
# Objective
- Resolves#15453
## Solution
- Added new `World::resource_id` and `World::register_resource` methods
to support this feature
- Added new `ReflectResource::register_resource` method, and new pointer
to this new function
- Added new `ReflectComponent::register_component`
## Testing
- Tested this locally, but couldn't test the entire crate locally, just
this new feature, expect that CI will do the rest of the work.
---
## Showcase
```rs
#[derive(Component, Reflect)]
#[reflect(Component)]
struct MyComp;
let mut world = World::new();
let mut registry = TypeRegistration::of::<MyComp>();
registry.insert::<ReflectComponent>(FromType::<MyComp>::from_type());
let data = registry.data::<ReflectComponent>().unwrap();
// Its now possible to register the Component in the world this way
let component_id = data.register_component(&mut world);
// They will be the same
assert_eq!(component_id, world.component_id::<MyComp>().unwrap());
```
```rs
#[derive(Resource, Reflect)]
#[reflect(Resource)]
struct MyResource;
let mut world = World::new();
let mut registry = TypeRegistration::of::<MyResource>();
registry.insert::<ReflectResource>(FromType::<MyResource>::from_type());
let data = registry.data::<ReflectResource>().unwrap();
// Same with resources
let component_id = data.register_resource(&mut world);
// They match
assert_eq!(component_id, world.resource_id::<MyResource>().unwrap());
```
# Objective
Add the following system params:
- `QuerySingle<D, F>` - Valid if only one matching entity exists,
- `Option<QuerySingle<D, F>>` - Valid if zero or one matching entity
exists.
As @chescock pointed out, we don't need `Mut` variants.
Fixes: #15264
## Solution
Implement the type and both variants of system params.
Also implement `ReadOnlySystemParam` for readonly queries.
Added a new ECS example `fallible_params` which showcases `SingleQuery`
usage.
In the future we might want to add `NonEmptyQuery`,
`NonEmptyEventReader` and `Res` to it (or maybe just stop at mentioning
it).
## Testing
Tested with the example.
There is a lot of warning spam so we might want to implement #15391.
# Objective
- We use a feature introduced in async-channel 2.3.0, `force_send`
- Existing project fail to compile as they have a lock file on the 2.2.X
## Solution
- Bump async-channel
> [!NOTE]
> This is my first PR, so if something is incorrect
> or missing, please let me know :3
# Objective
- Clarifies `spawn`, `spawn_batch` and `ParallelCommands` docs about
performance and use cases
- Fixes#15472
## Solution
Add comments to `spawn`, `spawn_batch` and `ParallelCommands` to clarify
the
intended use case and link to other/better ways of doing spawning things
for
certain use cases.
# Objective
- Fixes#15447
## Solution
- Remove the `Return::Unit` variant and use a `Return::Owned` variant
holding a unit `()` type.
## Migration Guide
- Removed the `Return::Unit` variant; use `Return::unit()` instead.
---------
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
# Objective
The "zero-sized" description was outdated and misleading.
## Solution
Changed the description to just say that it's an enumeration (an enum)
# Objective
- Fixes#15490 introduced in #15094.
## Solution
- Use non-panicking `try_insert`
## Testing
- Closing window with `CursorIcon` no longer crashes after this change
(confirmed with `window_settings` example)
# Objective
- Contributes to #15460
## Solution
- Wrap `derive_label` `quote!` in an anonymous constant which contains
an `extern crate alloc` statement, allowing use of the `alloc` namespace
even when a user has not brought in the crate themselves.
## Testing
- CI passed locally.
## Notes
We can't generate code that uses `::std::boxed::Box` in `no_std`
environments, but we also can't rely on `::alloc::boxed::Box` either,
since the user might not have declared `extern crate alloc`. To resolve
this, the generated code is wrapped in an anonymous constant which
contains the `extern crate alloc` invocation.
This does mean the macro is no longer hygienic against cases where the
user provides an alternate `alloc` crate, however I believe this is an
acceptable compromise.
Additionally, this crate itself doesn't need to be `no_std`, it just
needs to _generate_ `no_std` compatible code.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
## Objective
Closes#15408 (somewhat)
## Solution
- Moved the existing HTTP transport to its own module with its own
plugin (`RemoteHttpPlugin`) (disabled on WASM)
- Swapped out the `smol` crate for the smaller crates it re-exports to
make it easier to keep out non-wasm code (HTTP transport needs
`async-io` which can't build on WASM)
- Added a new public `BrpSender` resource holding the matching sender
for the `BrpReceiver`' (formally `BrpMailbox`). This allows other crates
to send `BrpMessage`'s to the "mailbox".
## Testing
TODO
---------
Co-authored-by: Matty <weatherleymatthew@gmail.com>
# Objective
- Significantly improve the ergonomics of gamepads and allow new
features
Gamepads are a bit unergonomic to work with, they use resources but
unlike other inputs, they are not limited to a single gamepad, to get
around this it uses an identifier (Gamepad) to interact with anything
causing all sorts of issues.
1. There are too many: Gamepads, GamepadSettings, GamepadInfo,
ButtonInput<T>, 2 Axis<T>.
2. ButtonInput/Axis generic methods become really inconvenient to use
e.g. any_pressed()
3. GamepadButton/Axis structs are unnecessary boilerplate:
```rust
for gamepad in gamepads.iter() {
if button_inputs.just_pressed(GamepadButton::new(gamepad, GamepadButtonType::South)) {
info!("{:?} just pressed South", gamepad);
} else if button_inputs.just_released(GamepadButton::new(gamepad, GamepadButtonType::South))
{
info!("{:?} just released South", gamepad);
}
}
```
4. Projects often need to create resources to store the selected gamepad
and have to manually check if their gamepad is still valid anyways.
- Previously attempted by #3419 and #12674
## Solution
- Implement gamepads as entities.
Using entities solves all the problems above and opens new
possibilities.
1. Reduce boilerplate and allows iteration
```rust
let is_pressed = gamepads_buttons.iter().any(|buttons| buttons.pressed(GamepadButtonType::South))
```
2. ButtonInput/Axis generic methods become ergonomic again
```rust
gamepad_buttons.any_just_pressed([GamepadButtonType::Start, GamepadButtonType::Select])
```
3. Reduces the number of public components significantly (Gamepad,
GamepadSettings, GamepadButtons, GamepadAxes)
4. Components are highly convenient. Gamepad optional features could now
be expressed naturally (`Option<Rumble> or Option<Gyro>`), allows devs
to attach their own components and filter them, so code like this
becomes possible:
```rust
fn move_player<const T: usize>(
player: Query<&Transform, With<Player<T>>>,
gamepads_buttons: Query<&GamepadButtons, With<Player<T>>>,
) {
if let Ok(gamepad_buttons) = gamepads_buttons.get_single() {
if gamepad_buttons.pressed(GamepadButtonType::South) {
// move player
}
}
}
```
---
## Follow-up
- [ ] Run conditions?
- [ ] Rumble component
# Changelog
## Added
TODO
## Changed
TODO
## Removed
TODO
## Migration Guide
TODO
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
The next step in the migration to required components: Deprecate
`VisibilityBundle` and make `Visibility` require `InheritedVisibility`
and `ViewVisibility`, as per the [chosen
proposal](https://hackmd.io/@bevy/required_components/%2FcO7JPSAQR5G0J_j5wNwtOQ).
## Solution
Deprecate `VisibilityBundle` and make `Visibility` require
`InheritedVisibility` and `ViewVisibility`.
I chose not to deprecate `SpatialBundle` yet, as doing so would mean
that we need to manually add `Visibility` to a bunch of places. It will
be nicer once meshes, sprites, lights, fog, and cameras have been
migrated, since they will require `Transform` and `Visibility` and
therefore not need manually added defaults for them.
---
## Migration Guide
Replace all insertions of `VisibilityBundle` with the `Visibility`
component. The other components required by it will now be inserted
automatically.
# Objective
Improve the performance of animation.
`animate_targets` only does work for entities with a `AnimationTarget`
component, but the query it uses has no filters and matches all
archetypes, resulting in extra work checking and ignoring every other
entity in the world.
In addition, it uses `EntityMutExcept::get`, which has to look up the
`ComponentId` for `AnimationTarget` each time it's used.
Fixes#15412
## Solution
Instead of `entity_mut.get::<AnimationTarget>()`, add `&AnimationTarget`
to the query and read it directly. This requires adding
`AnimationTarget` to the list of exceptions in the `EntityMutExcept`.
Since the resulting type is getting long, add an alias for it.
This does mean that `AnimationTarget` is no longer available through
`entity`, which means it's not possible to animate the `AnimationTarget`
component itself.
## Testing
I ran performance traces of many_foxes comparing this branch to main.
Red is main, yellow is these changes:
The first step in the migration to required components! This PR removes
`GlobalTransform` from all user-facing code, since it's now added
automatically wherever `Transform` is used.
## Testing
- None of the examples I tested were broken, and I assume breaking
transforms in any way would be visible *everywhere*
---
## Changelog
- Make `Transform` require `GlobalTransform`
~~- Remove `GlobalTransform` from all engine bundles~~
- Remove in-engine insertions of GlobalTransform and TransformBundle
- Deprecate `TransformBundle`
- update docs to reflect changes
## Migration Guide
Replace all insertions of `GlobalTransform` and/or `TransformBundle`
with `Transform` alone.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Tim <JustTheCoolDude@gmail.com>
## Objective
- Adopted #6396
## Solution
Same as #6396, we use a compile-time checked `StorageSwitch` union type
to select the fetch data based on the component's storage type, saving
>= 8 bytes per component fetch in a given query.
Note: We forego the Query iteration change as it exists in a slightly
different form now on main.
## Testing
- All current tests pass locally.
---------
Co-authored-by: james7132 <contact@jamessliu.com>
Co-authored-by: Chris Russell <8494645+chescock@users.noreply.github.com>
# Objective
- Fixes#6370
- Closes#6581
## Solution
- Added the following lints to the workspace:
- `std_instead_of_core`
- `std_instead_of_alloc`
- `alloc_instead_of_core`
- Used `cargo +nightly fmt` with [item level use
formatting](https://rust-lang.github.io/rustfmt/?version=v1.6.0&search=#Item%5C%3A)
to split all `use` statements into single items.
- Used `cargo clippy --workspace --all-targets --all-features --fix
--allow-dirty` to _attempt_ to resolve the new linting issues, and
intervened where the lint was unable to resolve the issue automatically
(usually due to needing an `extern crate alloc;` statement in a crate
root).
- Manually removed certain uses of `std` where negative feature gating
prevented `--all-features` from finding the offending uses.
- Used `cargo +nightly fmt` with [crate level use
formatting](https://rust-lang.github.io/rustfmt/?version=v1.6.0&search=#Crate%5C%3A)
to re-merge all `use` statements matching Bevy's previous styling.
- Manually fixed cases where the `fmt` tool could not re-merge `use`
statements due to conditional compilation attributes.
## Testing
- Ran CI locally
## Migration Guide
The MSRV is now 1.81. Please update to this version or higher.
## Notes
- This is a _massive_ change to try and push through, which is why I've
outlined the semi-automatic steps I used to create this PR, in case this
fails and someone else tries again in the future.
- Making this change has no impact on user code, but does mean Bevy
contributors will be warned to use `core` and `alloc` instead of `std`
where possible.
- This lint is a critical first step towards investigating `no_std`
options for Bevy.
---------
Co-authored-by: François Mockers <francois.mockers@vleue.com>
# Objective
Fixes#15142
## Solution
* Moved all the UI border geometry calculations that were scattered
through the UI extraction functions into `ui_layout_system`.
* Added a `border: BorderRect` field to `Node` to store the border size
computed by `ui_layout_system`.
* Use the border values returned from Taffy rather than calculate them
ourselves during extraction.
* Removed the `logical_rect` and `physical_rect` methods from `Node` the
descriptions and namings are deceptive, it's better to create the rects
manually instead.
* Added a method `outline_radius` to `Node` that calculates the border
radius of outlines.
* For border values `ExtractedUiNode` takes `BorderRect` and
`ResolvedBorderRadius` now instead of raw `[f32; 4]` values and converts
them in `prepare_uinodes`.
* Removed some unnecessary scaling and clamping of border values
(#15142).
* Added a `BorderRect::ZERO` constant.
* Added an `outlined_node_size` method to `Node`.
## Testing
Added some non-uniform borders to the border example. Everything seems
to be in order:
<img width="626" alt="nub"
src="https://github.com/user-attachments/assets/258ed8b5-1a9e-4ac5-99c2-6bf25c0ef31c">
## Migration Guide
The `logical_rect` and `physical_rect` methods have been removed from
`Node`. Use `Rect::from_center_size` with the translation and node size
instead.
The types of the fields border and border_radius of `ExtractedUiNode`
have been changed to `BorderRect` and `ResolvedBorderRadius`
respectively.
---------
Co-authored-by: UkoeHB <37489173+UkoeHB@users.noreply.github.com>
Co-authored-by: akimakinai <105044389+akimakinai@users.noreply.github.com>
# Objective
- Fixes#15451
## Migration Guide
- `World::init_component` has been renamed to `register_component`.
- `World::init_component_with_descriptor` has been renamed to
`register_component_with_descriptor`.
- `World::init_bundle` has been renamed to `register_bundle`.
- `Components::init_component` has been renamed to `register_component`.
- `Components::init_component_with_descriptor` has been renamed to
`register_component_with_descriptor`.
- `Components::init_resource` has been renamed to `register_resource`.
- `Components::init_non_send` had been renamed to `register_non_send`.
# Objective
`bevy_gltf` have an instance where `use bevy_animation` is not behind
`#[cfg(feature = "bevy_animation")]`.
This resulted in a compile error when the feature is not enabled:
`failed to resolve: use of undeclared crate or module 'bevy_animation'`.
## Solution
move this instance of `use bevy_animation` behind the `cfg` attribute.
## Testing
I no longer get the error when compiling without the feature.
# Objective
Make it easier to debug why an entity doesn't match a query.
## Solution
List the entities components in `QueryEntityError::QueryDoesNotMatch`'s
message, e.g. `The query does not match the entity 0v1, which has
components foo::Bar, foo::Baz`.
This covers most cases as expected components are typically known and
filtering for change detection is rare when assessing a query by entity
id.
## Testing
Added a test confirming the new message matches the entity's components.
## Migration Guide
- `QueryEntityError` now has a lifetime. Convert it to a custom error if
you need to store it.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: poopy <gonesbird@gmail.com>
# Objective
- #15331
## Solution
-Just changed it to Trigger since the function signature shows it's just
a wrapper trait
## Testing
Will let tests pass
---------
Co-authored-by: Fernan Lukban <fernanlukban@gmail.co>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Antony <antony.m.3012@gmail.com>
# Objective
- Add a test case for #14300Fixes#14300
## Solution
`SceneEntityMapper` relies on operations on `Entities` that require
flushing in advance, such as `alloc` and `free`. Previously, it wasn't
calling `world.flush_entities()` itself and relied on its caller having
flushed beforehand. This wasn't an issue before observers and hooks were
released, since entity reservation was happening at expected times. Now
that hooks and observers are a thing, they can introduce a need to
flush.
We have a few options:
* Flush after each observer/hook run
* Flush between each paired observer/hook and operation that requires a
flush
* Flush before operations requiring it
The first option for this case seemed trickier to reason about than I
wanted, since it involved the `BundleInserter` and its
`UnsafeWorldCell`, and the second is generally harder to track down. The
third seemed the most straightforward and conventional, since we can see
a flush occurring at the start of a number of `World` methods.
Therefore, we're letting `SceneEntityMapper` be in charge of upholding
its own invariants and calling `flush_entities` when it's created.
## Testing
Added a new test case modeled after #14300
# Objective
- Fixes#15373
- Fixes
https://github.com/bevyengine/bevy/pull/14920#issuecomment-2370428013
## Solution
- Make `IntoSystem::pipe` and `IntoSystem::map` return two new
(possibly-ZST) types that implement `IntoSystem` and whose `into_system`
method return the systems that were previously being returned by
`IntoSystem::pipe` and `IntoSystem::map`
- Don't eagerly call `IntoSystem::into_system` on the argument given to
`RunSystemCachedWith::new` to avoid losing its ZST-ness
## Testing
- Added a regression test for each issue
## Migration Guide
- `IntoSystem::pipe` and `IntoSystem::map` now return `IntoPipeSystem`
and `IntoAdapterSystem` instead of `PipeSystem` and `AdapterSystem`.
Most notably these types don't implement `System` but rather only
`IntoSystem`.
The logic in PR #14808 broke `bevy_asset_loader`, because calling
`AssetServer::load_untyped()` initiates a load of an asset of type
`LoadedUntypedAsset`, which doesn't match any asset loaders and
therefore fails. I reverted the lines that were causing the problem. The
resulting code seems to work, but I'm not sure if this was the correct
fix.
# Objective
Fixes#14467
Observers and component lifecycle hooks are allowed to perform
operations that subsequently require `Entities` to be flushed, such as
reserving a new entity. If this occurs during an `on_remove` hook or an
`OnRemove` event trigger during an `EntityWorldMut::despawn`, a panic
will occur.
## Solution
Call `world.flush_entities()` after running `on_remove` hooks/observers
during `despawn`
## Testing
Added a new test that fails before the fix and succeeds afterward.
# Objective
#15349 added an `impl_reflect!` for `glam::EulerRot`. This was done by
copying and pasting the enum definition from `glam` into `bevy_reflect`
so that the macro could interpret the variants.
However, as mentioned in the description for that PR, this would need to
be updated for `glam` 0.29, as it had not been updated yet.
#15249 came and updated `glam` to 0.29, but did not change these impls.
This is understandable as failing to do so doesn't cause any compile
errors.
This PR updates the definition and aims to make this silent breakage a
little less silent.
## Solution
Firstly, I updated the definition for `EulerRot` to match the one from
`glam`.
Secondly, I added the `assert_type_match` crate, which I created
specifically to solve this problem. By using this crate, we'll get a
compile time error if `glam` ever decides to change `EulerRot` again.
In the future we can consider using it for other types with this
problem, including in other crates (I'm pretty sure `bevy_window` and/or
`bevy_winit` also copy+paste some types). I made sure to use as few
dependencies as possible so everything should already be in-tree (it's
just `quote`, `proc-macro2`, and `syn` with default features).
## Testing
No tests added. CI should pass.
---
## Migration Guide
The reflection implementation for `EulerRot` has been updated to align
with `glam` 0.29. Please update any reflection-based usages accordingly.
# Objective
I'm building a game where i generate a set of meshes where the transform
is identity, and in each mesh the vertices are offset to where the model
is. When adding visibility ranges to the models i noticed that they only
switched when the distance to the origin changed over the threshold and
all at the same time.
## Solution
I believe that each mesh gets a Aabb generated for use with visibility
testing. So we can use that aabb to calculate a more representative
distance to the mesh.
The code to transform the aabb is taken from the visibility sysyem.
## Testing
I tested the changes locally in my project.
Would you like me to write an example or a test somewhere?
Is there any other code that uses the visibility range, that i should
also update?
# Objective
Fix "system skipped" warnings when validation fails on systems that
wouldn't run because of run conditions.
## Solution
> I think the error is from a system defined as:
>
> ```rust
> no_gpu_preprocessing::batch_and_prepare_sorted_render_phase::<SPI,
GFBD>
> .run_if(resource_exists::<BatchedInstanceBuffer<GFBD::BufferData>>),
> ```
>
> So the `run_if` was preventing the panics. Maybe we need to skip
validation if `!system_conditions_met`, or at least silence the warning
in that case.
*By @chescock in
https://discord.com/channels/691052431525675048/692572690833473578/1287865365312831562*
Validation of system is skipped if the system was already skipped by run
conditions.
## Testing
Ran alien addict example, no more warnings.
# Objective
Updating ``glam`` to 0.29, ``encase`` to 0.10.
## Solution
Update the necessary ``Cargo.toml`` files.
## Testing
Ran ``cargo run -p ci`` on Windows; no issues came up.
---------
Co-authored-by: aecsocket <aecsocket@tutanota.com>
# Objective
Adopted from #13563.
The goal is to implement the Bevy Remote Protocol over HTTP/JSON,
allowing the ECS to be interacted with remotely.
## Solution
At a high level, there are really two separate things that have been
undertaken here:
1. First, `RemotePlugin` has been created, which has the effect of
embedding a [JSON-RPC](https://www.jsonrpc.org/specification) endpoint
into a Bevy application.
2. Second, the [Bevy Remote Protocol
verbs](https://gist.github.com/coreh/1baf6f255d7e86e4be29874d00137d1d#file-bevy-remote-protocol-md)
(excluding `POLL`) have been implemented as remote methods for that
JSON-RPC endpoint under a Bevy-exclusive namespace (e.g. `bevy/get`,
`bevy/list`, etc.).
To avoid some repetition, here is the crate-level documentation, which
explains the request/response structure, built-in-methods, and custom
method configuration:
<details>
<summary>Click to view crate-level docs</summary>
```rust
//! An implementation of the Bevy Remote Protocol over HTTP and JSON, to allow
//! for remote control of a Bevy app.
//!
//! Adding the [`RemotePlugin`] to your [`App`] causes Bevy to accept
//! connections over HTTP (by default, on port 15702) while your app is running.
//! These *remote clients* can inspect and alter the state of the
//! entity-component system. Clients are expected to `POST` JSON requests to the
//! root URL; see the `client` example for a trivial example of use.
//!
//! The Bevy Remote Protocol is based on the JSON-RPC 2.0 protocol.
//!
//! ## Request objects
//!
//! A typical client request might look like this:
//!
//! ```json
//! {
//! "method": "bevy/get",
//! "id": 0,
//! "params": {
//! "entity": 4294967298,
//! "components": [
//! "bevy_transform::components::transform::Transform"
//! ]
//! }
//! }
//! ```
//!
//! The `id` and `method` fields are required. The `param` field may be omitted
//! for certain methods:
//!
//! * `id` is arbitrary JSON data. The server completely ignores its contents,
//! and the client may use it for any purpose. It will be copied via
//! serialization and deserialization (so object property order, etc. can't be
//! relied upon to be identical) and sent back to the client as part of the
//! response.
//!
//! * `method` is a string that specifies one of the possible [`BrpRequest`]
//! variants: `bevy/query`, `bevy/get`, `bevy/insert`, etc. It's case-sensitive.
//!
//! * `params` is parameter data specific to the request.
//!
//! For more information, see the documentation for [`BrpRequest`].
//! [`BrpRequest`] is serialized to JSON via `serde`, so [the `serde`
//! documentation] may be useful to clarify the correspondence between the Rust
//! structure and the JSON format.
//!
//! ## Response objects
//!
//! A response from the server to the client might look like this:
//!
//! ```json
//! {
//! "jsonrpc": "2.0",
//! "id": 0,
//! "result": {
//! "bevy_transform::components::transform::Transform": {
//! "rotation": { "x": 0.0, "y": 0.0, "z": 0.0, "w": 1.0 },
//! "scale": { "x": 1.0, "y": 1.0, "z": 1.0 },
//! "translation": { "x": 0.0, "y": 0.5, "z": 0.0 }
//! }
//! }
//! }
//! ```
//!
//! The `id` field will always be present. The `result` field will be present if the
//! request was successful. Otherwise, an `error` field will replace it.
//!
//! * `id` is the arbitrary JSON data that was sent as part of the request. It
//! will be identical to the `id` data sent during the request, modulo
//! serialization and deserialization. If there's an error reading the `id` field,
//! it will be `null`.
//!
//! * `result` will be present if the request succeeded and will contain the response
//! specific to the request.
//!
//! * `error` will be present if the request failed and will contain an error object
//! with more information about the cause of failure.
//!
//! ## Error objects
//!
//! An error object might look like this:
//!
//! ```json
//! {
//! "code": -32602,
//! "message": "Missing \"entity\" field"
//! }
//! ```
//!
//! The `code` and `message` fields will always be present. There may also be a `data` field.
//!
//! * `code` is an integer representing the kind of an error that happened. Error codes documented
//! in the [`error_codes`] module.
//!
//! * `message` is a short, one-sentence human-readable description of the error.
//!
//! * `data` is an optional field of arbitrary type containing additional information about the error.
//!
//! ## Built-in methods
//!
//! The Bevy Remote Protocol includes a number of built-in methods for accessing and modifying data
//! in the ECS. Each of these methods uses the `bevy/` prefix, which is a namespace reserved for
//! BRP built-in methods.
//!
//! ### bevy/get
//!
//! Retrieve the values of one or more components from an entity.
//!
//! `params`:
//! - `entity`: The ID of the entity whose components will be fetched.
//! - `components`: An array of fully-qualified type names of components to fetch.
//!
//! `result`: A map associating each type name to its value on the requested entity.
//!
//! ### bevy/query
//!
//! Perform a query over components in the ECS, returning all matching entities and their associated
//! component values.
//!
//! All of the arrays that comprise this request are optional, and when they are not provided, they
//! will be treated as if they were empty.
//!
//! `params`:
//! `params`:
//! - `data`:
//! - `components` (optional): An array of fully-qualified type names of components to fetch.
//! - `option` (optional): An array of fully-qualified type names of components to fetch optionally.
//! - `has` (optional): An array of fully-qualified type names of components whose presence will be
//! reported as boolean values.
//! - `filter` (optional):
//! - `with` (optional): An array of fully-qualified type names of components that must be present
//! on entities in order for them to be included in results.
//! - `without` (optional): An array of fully-qualified type names of components that must *not* be
//! present on entities in order for them to be included in results.
//!
//! `result`: An array, each of which is an object containing:
//! - `entity`: The ID of a query-matching entity.
//! - `components`: A map associating each type name from `components`/`option` to its value on the matching
//! entity if the component is present.
//! - `has`: A map associating each type name from `has` to a boolean value indicating whether or not the
//! entity has that component. If `has` was empty or omitted, this key will be omitted in the response.
//!
//! ### bevy/spawn
//!
//! Create a new entity with the provided components and return the resulting entity ID.
//!
//! `params`:
//! - `components`: A map associating each component's fully-qualified type name with its value.
//!
//! `result`:
//! - `entity`: The ID of the newly spawned entity.
//!
//! ### bevy/destroy
//!
//! Despawn the entity with the given ID.
//!
//! `params`:
//! - `entity`: The ID of the entity to be despawned.
//!
//! `result`: null.
//!
//! ### bevy/remove
//!
//! Delete one or more components from an entity.
//!
//! `params`:
//! - `entity`: The ID of the entity whose components should be removed.
//! - `components`: An array of fully-qualified type names of components to be removed.
//!
//! `result`: null.
//!
//! ### bevy/insert
//!
//! Insert one or more components into an entity.
//!
//! `params`:
//! - `entity`: The ID of the entity to insert components into.
//! - `components`: A map associating each component's fully-qualified type name with its value.
//!
//! `result`: null.
//!
//! ### bevy/reparent
//!
//! Assign a new parent to one or more entities.
//!
//! `params`:
//! - `entities`: An array of entity IDs of entities that will be made children of the `parent`.
//! - `parent` (optional): The entity ID of the parent to which the child entities will be assigned.
//! If excluded, the given entities will be removed from their parents.
//!
//! `result`: null.
//!
//! ### bevy/list
//!
//! List all registered components or all components present on an entity.
//!
//! When `params` is not provided, this lists all registered components. If `params` is provided,
//! this lists only those components present on the provided entity.
//!
//! `params` (optional):
//! - `entity`: The ID of the entity whose components will be listed.
//!
//! `result`: An array of fully-qualified type names of components.
//!
//! ## Custom methods
//!
//! In addition to the provided methods, the Bevy Remote Protocol can be extended to include custom
//! methods. This is primarily done during the initialization of [`RemotePlugin`], although the
//! methods may also be extended at runtime using the [`RemoteMethods`] resource.
//!
//! ### Example
//! ```ignore
//! fn main() {
//! App::new()
//! .add_plugins(DefaultPlugins)
//! .add_plugins(
//! // `default` adds all of the built-in methods, while `with_method` extends them
//! RemotePlugin::default()
//! .with_method("super_user/cool_method".to_owned(), path::to::my:🆒:handler)
//! // ... more methods can be added by chaining `with_method`
//! )
//! .add_systems(
//! // ... standard application setup
//! )
//! .run();
//! }
//! ```
//!
//! The handler is expected to be a system-convertible function which takes optional JSON parameters
//! as input and returns a [`BrpResult`]. This means that it should have a type signature which looks
//! something like this:
//! ```
//! # use serde_json::Value;
//! # use bevy_ecs::prelude::{In, World};
//! # use bevy_remote::BrpResult;
//! fn handler(In(params): In<Option<Value>>, world: &mut World) -> BrpResult {
//! todo!()
//! }
//! ```
//!
//! Arbitrary system parameters can be used in conjunction with the optional `Value` input. The
//! handler system will always run with exclusive `World` access.
//!
//! [the `serde` documentation]: https://serde.rs/
```
</details>
### Message lifecycle
At a high level, the lifecycle of client-server interactions is
something like this:
1. The client sends one or more `BrpRequest`s. The deserialized version
of that is just the Rust representation of a JSON-RPC request, and it
looks like this:
```rust
pub struct BrpRequest {
/// The action to be performed. Parsing is deferred for the sake of error reporting.
pub method: Option<Value>,
/// Arbitrary data that will be returned verbatim to the client as part of
/// the response.
pub id: Option<Value>,
/// The parameters, specific to each method.
///
/// These are passed as the first argument to the method handler.
/// Sometimes params can be omitted.
pub params: Option<Value>,
}
```
2. These requests are accumulated in a mailbox resource (small lie but
close enough).
3. Each update, the mailbox is drained by a system
`process_remote_requests`, where each request is processed according to
its `method`, which has an associated handler. Each handler is a Bevy
system that runs with exclusive world access and returns a result; e.g.:
```rust
pub fn process_remote_get_request(In(params): In<Option<Value>>, world: &World) -> BrpResult { // ... }
```
4. The result (or an error) is reported back to the client.
## Testing
This can be tested by using the `server` and `client` examples. The
`client` example is not particularly exhaustive at the moment (it only
creates barebones `bevy/query` requests) but is still informative. Other
queries can be made using `curl` with the `server` example running.
For example, to make a `bevy/list` request and list all registered
components:
```bash
curl -X POST -d '{ "jsonrpc": "2.0", "id": 1, "method": "bevy/list" }' 127.0.0.1:15702 | jq .
```
---
## Future direction
There were a couple comments on BRP versioning while this was in draft.
I agree that BRP versioning is a good idea, but I think that it requires
some consensus on a couple fronts:
- First of all, what does the version actually mean? Is it a version for
the protocol itself or for the `bevy/*` methods implemented using it?
Both?
- Where does the version actually live? The most natural place is just
where we have `"jsonrpc"` right now (at least if it's versioning the
protocol itself), but this means we're not actually conforming to
JSON-RPC any more (so, for example, any client library used to construct
JSON-RPC requests would stop working). I'm not really against that, but
it's at least a real decision.
- What do we actually do when we encounter mismatched versions? Adding
handling for this would be actual scope creep instead of just a little
add-on in my opinion.
Another thing that would be nice is making the internal structure of the
implementation less JSON-specific. Right now, for example, component
values that will appear in server responses are quite eagerly converted
to JSON `Value`s, which prevents disentangling the handler logic from
the communication medium, but it can probably be done in principle and I
imagine it would enable more code reuse (e.g. for custom method
handlers) in addition to making the internals more readily usable for
other formats.
---------
Co-authored-by: Patrick Walton <pcwalton@mimiga.net>
Co-authored-by: DragonGamesStudios <margos.michal@gmail.com>
Co-authored-by: Christopher Biscardi <chris@christopherbiscardi.com>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
# Objective
Fixes#14331
## Solution
- Make `Traversal` a subtrait of `ReadOnlyQueryData`
- Update implementations and usages
## Testing
- Updated unit tests
## Migration Guide
Update implementations of `Traversal`.
---------
Co-authored-by: Christian Hughes <9044780+ItsDoot@users.noreply.github.com>
# Objective
Currently, the term "value" in the context of reflection is a bit
overloaded.
For one, it can be used synonymously with "data" or "variable". An
example sentence would be "this function takes a reflected value".
However, it is also used to refer to reflected types which are
`ReflectKind::Value`. These types are usually either primitives, opaque
types, or types that don't fall into any other `ReflectKind` (or perhaps
could, but don't due to some limitation/difficulty). An example sentence
would be "this function takes a reflected value type".
This makes it difficult to write good documentation or other learning
material without causing some amount of confusion to readers. Ideally,
we'd be able to move away from the `ReflectKind::Value` usage and come
up with a better term.
## Solution
This PR replaces the terminology of "value" with "opaque" across
`bevy_reflect`. This includes in documentation, type names, variant
names, and macros.
The term "opaque" was chosen because that's essentially how the type is
treated within the reflection API. In other words, its internal
structure is hidden. All we can do is work with the type itself.
### Primitives
While primitives are not technically opaque types, I think it's still
clearer to refer to them as "opaque" rather than keep the confusing
"value" terminology.
We could consider adding another concept for primitives (e.g.
`ReflectKind::Primitive`), but I'm not sure that provides a lot of
benefit right now. In most circumstances, they'll be treated just like
an opaque type. They would also likely use the same macro (or two copies
of the same macro but with different names).
## Testing
You can test locally by running:
```
cargo test --package bevy_reflect --all-features
```
---
## Migration Guide
The reflection concept of "value type" has been replaced with a clearer
"opaque type". The following renames have been made to account for this:
- `ReflectKind::Value` → `ReflectKind::Opaque`
- `ReflectRef::Value` → `ReflectRef::Opaque`
- `ReflectMut::Value` → `ReflectMut::Opaque`
- `ReflectOwned::Value` → `ReflectOwned::Opaque`
- `TypeInfo::Value` → `TypeInfo::Opaque`
- `ValueInfo` → `OpaqueInfo`
- `impl_reflect_value!` → `impl_reflect_opaque!`
- `impl_from_reflect_value!` → `impl_from_reflect_opaque!`
Additionally, declaring your own opaque types no longer uses
`#[reflect_value]`. This attribute has been replaced by
`#[reflect(opaque)]`:
```rust
// BEFORE
#[derive(Reflect)]
#[reflect_value(Default)]
struct MyOpaqueType(u32);
// AFTER
#[derive(Reflect)]
#[reflect(opaque)]
#[reflect(Default)]
struct MyOpaqueType(u32);
```
Note that the order in which `#[reflect(opaque)]` appears does not
matter.
# Objective
- Fixes#14924
- Closes#9584
## Solution
- We introduce a new trait, `SystemInput`, that serves as a type
function from the `'static` form of the input, to its lifetime'd
version, similarly to `SystemParam` or `WorldQuery`.
- System functions now take the lifetime'd wrapped version,
`SystemInput::Param<'_>`, which prevents the issue presented in #14924
(i.e. `InRef<T>`).
- Functions for running systems now take the lifetime'd unwrapped
version, `SystemInput::Inner<'_>` (i.e. `&T`).
- Due to the above change, system piping had to be re-implemented as a
standalone type, rather than `CombinatorSystem` as it was previously.
- Removes the `Trigger<'static, E, B>` transmute in observer runner
code.
## Testing
- All current tests pass.
- Added additional tests and doc-tests.
---
## Showcase
```rust
let mut world = World::new();
let mut value = 2;
// Currently possible:
fn square(In(input): In<usize>) -> usize {
input * input
}
value = world.run_system_once_with(value, square);
// Now possible:
fn square_mut(InMut(input): InMut<usize>) {
*input *= *input;
}
world.run_system_once_with(&mut value, square_mut);
// Or:
fn square_ref(InRef(input): InRef<usize>) -> usize {
*input * *input
}
value = world.run_system_once_with(&value, square_ref);
```
## Migration Guide
- All current explicit usages of the following types must be changed in
the way specified:
- `SystemId<I, O>` to `SystemId<In<I>, O>`
- `System<In = T>` to `System<In = In<T>>`
- `IntoSystem<I, O, M>` to `IntoSystem<In<I>, O, M>`
- `Condition<M, T>` to `Condition<M, In<T>>`
- `In<Trigger<E, B>>` is no longer a valid input parameter type. Use
`Trigger<E, B>` directly, instead.
---------
Co-authored-by: Giacomo Stevanato <giaco.stevanato@gmail.com>
# Objective
Fixes#15351
## Solution
- Created new external crate and ported over the code
## Testing
- CI
## Migration guide
Replace references to `bevy_utils::ShortName` with
`disqualified::ShortName`.
# Objective
- Fix https://github.com/bevyengine/bevy/issues/15366. `cosmic-text`
buffers refuse to function if the `Metrics` font size is zero.
## Solution
- Trick `cosmic-text` into clearing its internal buffer when the largest
font size of segments is zero by sending it no spans and a tiny
`Metrics::font_size` and `Metrics::line_height`.
## Testing
- [x] Fixes @brandon-reinhart 's bug.
# Objective
- Fixes#10720
- Adds the ability to control font smoothing of rendered text
## Solution
- Introduce the `FontSmoothing` enum, with two possible variants
(`FontSmoothing::None` and `FontSmoothing::AntiAliased`):
- This is based on `-webkit-font-smoothing`, in line with our practice
of adopting CSS-like properties/names for UI;
- I could have gone instead for the [`font-smooth`
property](https://developer.mozilla.org/en-US/docs/Web/CSS/font-smooth)
that's also supported by browsers, but didn't since it's also
non-standard, has an uglier name, and doesn't allow controlling the type
of antialias applied.
- Having an enum instead of e.g. a boolean, leaves the path open for
adding `FontSmoothing::SubpixelAntiAliased` in the future, without a
breaking change;
- Add all the necessary plumbing to get the `FontSmoothing` information
to where we rasterize the glyphs and store them in the atlas;
- Change the font atlas key to also take into account the smoothing
setting, not only font and font size;
- Since COSMIC Text [doesn't support controlling font
smoothing](https://github.com/pop-os/cosmic-text/issues/279), we roll
out our own threshold-based “implementation”:
- This has the downside of **looking ugly for “regular” vector fonts**
⚠️, since it doesn't properly take the hinting information into account
like a proper implementation on the rasterizer side would.
- However, **for fonts that have been specifically authored to be pixel
fonts, (a common use case in games!) this is not as big of a problem**,
since all lines are vertical/horizontal, and close to the final pixel
boundaries (as long as the font is used at a multiple of the size
originally intended by the author)
- Once COSMIC exposes this functionality, we can switch to using it
directly, and get better results;
- Use a nearest neighbor sampler for atlases with font smoothing
disabled, so that you can scale the text via transform and still get the
pixelated look;
- Add a convenience method to `Text` for setting the font smoothing;
- Add a demonstration of using the `FontSmoothing` property to the
`text2d` example.
## Testing
- Did you test these changes? If so, how?
- Yes. Via the `text2d`example, and also in my game.
- Are there any parts that need more testing?
- I'd like help from someone for testing this on devices/OSs with
fractional scaling (Android/Windows)
- How can other people (reviewers) test your changes? Is there anything
specific they need to know?
- Both via the `text2d` example and also by using it directly on your
projects.
- If relevant, what platforms did you test these changes on, and are
there any important ones you can't test?
- macOS
---
## Showcase
```rust
commands.spawn(Text2dBundle {
text: Text::from_section("Hello, World!", default())
.with_font_smoothing(FontSmoothing::None),
..default()
});
```
<img width="740" alt="image"
src="https://github.com/user-attachments/assets/b881b02c-4e43-410b-902f-6985c25140fc">
## Migration Guide
- `Text` now contains a `font_smoothing: FontSmoothing` property, make
sure to include it or add `..default()` when using the struct directly;
- `FontSizeKey` has been renamed to `FontAtlasKey`, and now also
contains the `FontSmoothing` setting;
- The following methods now take an extra `font_smoothing:
FontSmoothing` argument:
- `FontAtlas::new()`
- `FontAtlasSet::add_glyph_to_atlas()`
- `FontAtlasSet::get_glyph_atlas_info()`
- `FontAtlasSet::get_outlined_glyph_texture()`
# Objective
In order to derive `Reflect`, all of a struct's fields must implement
`FromReflect`. [As part of looking into some of the work mentioned
here](https://github.com/bevyengine/bevy/issues/13713#issuecomment-2364786694),
I noticed that `TextureFormat` doesn't implement `Reflect`, and decided
to split that into a separate PR.
## Solution
I decided that `TextureFormat` should be a `reflect_value` since,
although one variant has fields, most users will treat this as an opaque
value set explicitly. It also substantially reduces the complexity of
the implementation.
For now, this implementation isn't actually used by any crates, so, I
decided to not preemptively enable the feature on anything. But it's
technically an option, now, and more `wgpu` types can be added in the
future.
## Testing
Everything compiles okay, and I can't really see how this could be done
incorrectly given the above constraints.
# Objective
Currently, Bevy implements reflection for `glam::EulerRot` using:
```rs
impl_reflect_value!(::glam::EulerRot(Debug, Default, Deserialize, Serialize));
```
Treating it as an opaque type. However, it's useful to expose the
EulerRot enum variants directly, which I make use of from a drop down
selection box in `bevy_egui`. This PR changes this to use
`impl_reflect!`.
**Importantly**, Bevy currently uses glam 0.28.0, in which `EulerRot`
has just 6 variants. In glam 0.29.0, this is exanded to 24 variants, see
bb2ab05613.
When Bevy updates to 0.29.0, this reflect impl must also be updated to
include the new variants.
## Solution
Replaces the `impl_reflect_value!` with `impl_reflect!` and a
handwritten version of `EulerRot` with the same variants.
## Testing
Added a `tests` module to `glam.rs` to ensure that de/serialization
works. However, my main concern is making sure that the number of enum
variants matches glam's, which I'm not sure how to do using `Enum`.
# Objective
There's currently no way to iterate through all the type data in a
`TypeRegistration`. While these are all type-erased, it can still be
useful to see what types (by `TypeId`) are registered for a given type.
Additionally, it might be good to have ways of dynamically working with
`TypeRegistration`.
## Solution
Added a way to iterate through all type data on a given
`TypeRegistration`. This PR also adds methods for working with type data
dynamically as well as methods for conveniently checking if a given type
data exists on the registration.
I also took this opportunity to reorganize the methods on
`TypeRegistration` as it has always bothered me haha (i.e. the
constructor not being at the top, etc.).
## Testing
You can test locally by running:
```
cargo test --package bevy_reflect
```
---
## Showcase
The type-erased type data on a `TypeRegistration` can now be iterated!
```rust
#[derive(Reflect)]
struct Foo;
#[derive(Clone)]
struct DataA(i32);
#[derive(Clone)]
struct DataB(i32);
let mut registration = TypeRegistration::of::<Foo>();
registration.insert(DataA(123));
registration.insert(DataB(456));
let mut iter = registration.iter();
let (id, data) = iter.next().unwrap();
assert_eq!(id, TypeId::of::<DataA>());
assert_eq!(data.downcast_ref::<DataA>().unwrap().0, 123);
let (id, data) = iter.next().unwrap();
assert_eq!(id, TypeId::of::<DataB>());
assert_eq!(data.downcast_ref::<DataB>().unwrap().0, 456);
assert!(iter.next().is_none());
```
# Objective
- Fixes#8074
- Adopts / Supersedes #8104
## Solution
Adapted from #8104 and affords the same benefits.
**Additions**
- [x] Update scrolling on relayout (height of node or contents may have
changed)
- [x] Make ScrollPosition component optional for ui nodes to avoid
checking every node on scroll
- [x] Nested scrollviews
**Omissions**
- Removed input handling for scrolling from `bevy_ui`. Users should
update `ScrollPosition` directly.
### Implementation
Adds a new `ScrollPosition` component. Updating this component on a
`Node` with an overflow axis set to `OverflowAxis::Scroll` will
reposition its children by that amount when calculating node transforms.
As before, no impact on the underlying Taffy layout.
Calculating this correctly is trickier than it was in #8104 due to
`"Update scrolling on relayout"`.
**Background**
When `ScrollPosition` is updated directly by the user, it can be
trivially handled in-engine by adding the parent's scroll position to
the final location of each child node. However, _other layout actions_
may result in a situation where `ScrollPosition` needs to be updated.
Consider a 1000 pixel tall vertically scrolling list of 100 elements,
each 100 pixels tall. Scrolled to the bottom, the
`ScrollPosition.offset_y` is 9000, just enough to display the last
element in the list. When removing an element from that list, the new
desired `ScrollPosition.offset_y` is 8900, but, critically, that is not
known until after the sizes and positions of the children of the
scrollable node are resolved.
All user scrolling code today handles this by delaying the resolution by
one frame. One notable disadvantage of this is the inability to support
`WinitSettings::desktop_app()`, since there would need to be an input
AFTER the layout change that caused the scroll position to update for
the results of the scroll position update to render visually.
I propose the alternative in this PR, which allows for same-frame
resolution of scrolling layout.
**Resolution**
_Edit: Below resolution is outdated, and replaced with the simpler usage
of taffy's `Layout::content_size`._
When recursively iterating the children of a node, each child now
returns a `Vec2` representing the location of their own bottom right
corner. Then, `[[0,0, [x,y]]` represents a bounding box containing the
scrollable area filled by that child. Scrollable parents aggregate those
areas into the bounding box of _all_ children, then consider that result
against `ScrollPosition` to ensure its validity.
In the event that resolution of the layout of the children invalidates
the `ScrollPosition` (e.g. scrolled further than there were children to
scroll to), _all_ children of that node must be recursively
repositioned. The position of each child must change as a result of the
change in scroll position.
Therefore, this implementation takes care to only spend the cost of the
"second layout pass" when a specific node actually had a
`ScrollPosition` forcibly updated by the layout of its children.
## Testing
Examples in `ui/scroll.rs`. There may be more complex node/style
interactions that were unconsidered.
---
## Showcase
## Alternatives
- `bevy_ui` doesn't support scrolling.
- `bevy_ui` implements scrolling with a one-frame delay on reactions to
layout changes.
Currently, Bevy restricts animation clips to animating
`Transform::translation`, `Transform::rotation`, `Transform::scale`, or
`MorphWeights`, which correspond to the properties that glTF can
animate. This is insufficient for many use cases such as animating UI,
as the UI layout systems expect to have exclusive control over UI
elements' `Transform`s and therefore the `Style` properties must be
animated instead.
This commit fixes this, allowing for `AnimationClip`s to animate
arbitrary properties. The `Keyframes` structure has been turned into a
low-level trait that can be implemented to achieve arbitrary animation
behavior. Along with `Keyframes`, this patch adds a higher-level trait,
`AnimatableProperty`, that simplifies the task of animating single
interpolable properties. Built-in `Keyframes` implementations exist for
translation, rotation, scale, and morph weights. For the most part, you
can migrate by simply changing your code from
`Keyframes::Translation(...)` to `TranslationKeyframes(...)`, and
likewise for rotation, scale, and morph weights.
An example `AnimatableProperty` implementation for the font size of a
text section follows:
#[derive(Reflect)]
struct FontSizeProperty;
impl AnimatableProperty for FontSizeProperty {
type Component = Text;
type Property = f32;
fn get_mut(component: &mut Self::Component) -> Option<&mut
Self::Property> {
Some(&mut component.sections.get_mut(0)?.style.font_size)
}
}
In order to keep this patch relatively small, this patch doesn't include
an implementation of `AnimatableProperty` on top of the reflection
system. That can be a follow-up.
This patch builds on top of the new `EntityMutExcept<>` type in order to
widen the `AnimationTarget` query to include write access to all
components. Because `EntityMutExcept<>` has some performance overhead
over an explicit query, we continue to explicitly query `Transform` in
order to avoid regressing the performance of skeletal animation, such as
the `many_foxes` benchmark. I've measured the performance of that
benchmark and have found no significant regressions.
A new example, `animated_ui`, has been added. This example shows how to
use Bevy's built-in animation infrastructure to animate font size and
color, which wasn't possible before this patch.
## Showcase
https://github.com/user-attachments/assets/1fa73492-a9ce-405a-a8f2-4aacd7f6dc97
## Migration Guide
* Animation keyframes are now an extensible trait, not an enum. Replace
`Keyframes::Translation(...)`, `Keyframes::Scale(...)`,
`Keyframes::Rotation(...)`, and `Keyframes::Weights(...)` with
`Box::new(TranslationKeyframes(...))`, `Box::new(ScaleKeyframes(...))`,
`Box::new(RotationKeyframes(...))`, and
`Box::new(MorphWeightsKeyframes(...))` respectively.
# Objective
Functions created into `DynamicFunction[Mut]` do not currently validate
the number of arguments they are given before calling the function.
I originally did this because I felt users would want to validate this
themselves in the function rather than have it be done
behind-the-scenes. I'm now realizing, however, that we could remove this
boilerplate and if users wanted to check again then they would still be
free to do so (it'd be more of a sanity check at that point).
## Solution
Automatically validate the number of arguments passed to
`DynamicFunction::call` and `DynamicFunctionMut::call[_once]`.
This is a pretty trivial change since we just need to compare the length
of the `ArgList` to the length of the `[ArgInfo]` in the function's
`FunctionInfo`.
I also ran the benchmarks just in case and saw no regression by doing
this.
## Testing
You can test locally by running:
```
cargo test --package bevy_reflect --all-features
```
# Objective
The goal of this PR is to introduce `SystemParam` validation in order to
reduce runtime panics.
Fixes#15265
## Solution
`SystemParam` now has a new method `validate_param(...) -> bool`, which
takes immutable variants of `get_param` arguments. The returned value
indicates whether the parameter can be acquired from the world. If
parameters cannot be acquired for a system, it won't be executed,
similarly to run conditions. This reduces panics when using params like
`Res`, `ResMut`, etc. as well as allows for new, ergonomic params like
#15264 or #15302.
Param validation happens at the level of executors. All validation
happens directly before executing a system, in case of normal systems
they are skipped, in case of conditions they return false.
Warning about system skipping is primitive and subject to change in
subsequent PRs.
## Testing
Two executor tests check that all executors:
- skip systems which have invalid parameters:
- piped systems get skipped together,
- dependent systems still run correctly,
- skip systems with invalid run conditions:
- system conditions have invalid parameters,
- system set conditions have invalid parameters.
# Objective
#13320 added convenience methods for casting a `TypeInfo` into its
respective variant:
```rust
let info: &TypeInfo = <Vec<i32> as Typed>::type_info();
// We know `info` contains a `ListInfo`, so we can simply cast it:
let list_info: &ListInfo = info.as_list().unwrap();
```
This is especially helpful when you have already verified a type is a
certain kind via `ReflectRef`, `ReflectMut`, `ReflectOwned`, or
`ReflectKind`.
As mentioned in that PR, though, it would be useful to add similar
convenience methods to those types as well.
## Solution
Added convenience casting methods to `ReflectRef`, `ReflectMut`, and
`ReflectOwned`.
With these methods, I was able to reduce our nesting in certain places
throughout the crate.
Additionally, I took this opportunity to move these types (and
`ReflectKind`) to their own module to help clean up the `reflect`
module.
## Testing
You can test locally by running:
```
cargo test --package bevy_reflect --all-features
```
---
## Showcase
Convenience methods for casting `ReflectRef`, `ReflectMut`, and
`ReflectOwned` into their respective variants has been added! This
allows you to write cleaner code if you already know the kind of your
reflected data:
```rust
// BEFORE
let ReflectRef::List(list) = list.reflect_ref() else {
panic!("expected list");
};
// AFTER
let list = list.reflect_ref().as_list().unwrap();
```
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Pablo Reinhardt <126117294+pablo-lua@users.noreply.github.com>
# Objective
Working with `World` is painful due to lifetime issues and a lack of
ergonomics, so you may want to delegate to the system API. Your current
options are:
- `world.run_system_once`, which initializes the system each time it's
called (performance cost) and doesn't support `Local`. The docs
recommend users not use this method outside of diagnostic use cases like
unit tests.
- `world.run_system`, which requires you to register the system and
store the `SystemId` somewhere (made easier by implementing `FromWorld`
for a newtyped `Local`, unless you're in e.g. a custom `Command` impl).
These options work, but you're choosing between a performance cost and
an ergonomic challenge.
## Solution
Provide a cached `run_system` API that accepts an `S: IntoSystem` and
checks for a `CachedSystemId<S::System>(SystemId)` resource. If it
doesn't exist, it will register the system and save its `SystemId` in
that resource.
In other words, it hides the "save the `SystemId` in a `Local` or
`Resource`" pattern as an implementation detail.
Prior work: https://github.com/bevyengine/bevy/pull/10469.
## Testing
This approach worked in a proof-of-concept:
b34ee29531/src/util/patch/run_system_cached.rs (L35).
A new unit test was added and it passes in CI.
# Objective
Fixes#15306
## Solution
- Add feature gate on the module and the place where each one is used
- Declare the features and make them default
## Testing
- CI
**Note:** This is an adoption of @Shfty 's adoption (#8131) of #3996!
All I've done is updated the branch and run the docs CI.
> **Note:** This is an adoption of #3996, originally authored by
@molikto
>
> # Objective
> Allow use of `wgpu::Features::SPIRV_SHADER_PASSTHROUGH` and the
corresponding `wgpu::Device::create_shader_module_spirv` for SPIR-V
shader assets.
>
> This enables use-cases where naga is not sufficient to load a given
(valid) SPIR-V module, i.e. cases where naga lacks support for a given
SPIR-V feature employed by a third-party codegen backend like
`rust-gpu`.
>
> ## Solution
> * Reimplemented the changes from [Spirv shader
bypass #3996](https://github.com/bevyengine/bevy/pull/3996), on account
of the original branch having been deleted.
> * Documented the new `spirv_shader_passthrough` feature flag with the
appropriate platform support context from [wgpu's
documentation](https://docs.rs/wgpu/latest/wgpu/struct.Features.html#associatedconstant.SPIRV_SHADER_PASSTHROUGH).
>
> ## Changelog
> * Adds a `spirv_shader_passthrough` feature flag to the following
crates:
>
> * `bevy`
> * `bevy_internal`
> * `bevy_render`
> * Extends `RenderDevice::create_shader_module` with a conditional call
to `wgpu::Device::create_shader_module_spirv` if
`spirv_shader_passthrough` is enabled and
`wgpu::Features::SPIRV_SHADER_PASSTHROUGH` is present for the current
platform.
> * Documents the relevant `wgpu` platform support in
`docs/cargo_features.md`
---------
Co-authored-by: Josh Palmer <1253239+Shfty@users.noreply.github.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- A utilities module is considered to be a bad practice and poor
organization of code, so this fixes it.
## Solution
- Split each struct into its own module
- Move related lose functions into their own module
- Move the last few bits into good places
## Testing
- CI
---------
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
# Objective
While #13152 added function reflection, it didn't really make functions
reflectable. Instead, it made it so that they can be called with
reflected arguments and return reflected data. But functions themselves
cannot be reflected.
In other words, we can't go from `DynamicFunction` to `dyn
PartialReflect`.
## Solution
Allow `DynamicFunction` to actually be reflected.
This PR adds the `Function` reflection subtrait (and corresponding
`ReflectRef`, `ReflectKind`, etc.). With this new trait, we're able to
implement `PartialReflect` on `DynamicFunction`.
### Implementors
`Function` is currently only implemented for `DynamicFunction<'static>`.
This is because we can't implement it generically over all
functions—even those that implement `IntoFunction`.
What about `DynamicFunctionMut`? Well, this PR does **not** implement
`Function` for `DynamicFunctionMut`.
The reasons for this are a little complicated, but it boils down to
mutability. `DynamicFunctionMut` requires `&mut self` to be invoked
since it wraps a `FnMut`. However, we can't really model this well with
`Function`. And if we make `DynamicFunctionMut` wrap its internal
`FnMut` in a `Mutex` to allow for `&self` invocations, then we run into
either concurrency issues or recursion issues (or, in the worst case,
both).
So for the time-being, we won't implement `Function` for
`DynamicFunctionMut`. It will be better to evaluate it on its own. And
we may even consider the possibility of removing it altogether if it
adds too much complexity to the crate.
### Dynamic vs Concrete
One of the issues with `DynamicFunction` is the fact that it's both a
dynamic representation (like `DynamicStruct` or `DynamicList`) and the
only way to represent a function.
Because of this, it's in a weird middle ground where we can't easily
implement full-on `Reflect`. That would require `Typed`, but what static
`TypeInfo` could it provide? Just that it's a `DynamicFunction`? None of
the other dynamic types implement `Typed`.
However, by not implementing `Reflect`, we lose the ability to downcast
back to our `DynamicStruct`. Our only option is to call
`Function::clone_dynamic`, which clones the data rather than by simply
downcasting. This works in favor of the `PartialReflect::try_apply`
implementation since it would have to clone anyways, but is definitely
not ideal. This is also the reason I had to add `Debug` as a supertrait
on `Function`.
For now, this PR chooses not to implement `Reflect` for
`DynamicFunction`. We may want to explore this in a followup PR (or even
this one if people feel strongly that it's strictly required).
The same is true for `FromReflect`. We may decide to add an
implementation there as well, but it's likely out-of-scope of this PR.
## Testing
You can test locally by running:
```
cargo test --package bevy_reflect --all-features
```
---
## Showcase
You can now pass around a `DynamicFunction` as a `dyn PartialReflect`!
This also means you can use it as a field on a reflected type without
having to ignore it (though you do need to opt out of `FromReflect`).
```rust
#[derive(Reflect)]
#[reflect(from_reflect = false)]
struct ClickEvent {
callback: DynamicFunction<'static>,
}
let event: Box<dyn Struct> = Box::new(ClickEvent {
callback: (|| println!("Clicked!")).into_function(),
});
// We can access our `DynamicFunction` as a `dyn PartialReflect`
let callback: &dyn PartialReflect = event.field("callback").unwrap();
// And access function-related methods via the new `Function` trait
let ReflectRef::Function(callback) = callback.reflect_ref() else {
unreachable!()
};
// Including calling the function
callback.reflect_call(ArgList::new()).unwrap(); // Prints: Clicked!
```
# Objective
- Goal is to minimize bevy_utils #11478
## Solution
- Move the file short_name wholesale into bevy_reflect
## Testing
- Unit tests
- CI
## Migration Guide
- References to `bevy_utils::ShortName` should instead now be
`bevy_reflect::ShortName`.
---------
Co-authored-by: François Mockers <francois.mockers@vleue.com>
# Objective
Closes#11825
## Solution
Change return type of `get_resource_ref` and `resource_ref` from `Res`
to `Ref` and implement `From Res<T> for Ref<T>`.
# Objective
Fixes#15330
## Solution
1. Add an `ExtractTextureSlice` variant to `RenderUiSystem`.
2. Add `RenderUiSystem::ExtractTextureSlice` to the `ExtractSchedule`
between `ExtractImages` and `ExtractBorders`.
3. Add `extract_ui_texture_slices` to the new `ExtractTextureSlice`
system set.
Which results in texture slice nodes being extracted before borders. No
more z-fighting, borders will always be drawn on top of texture-sliced
images.
# Objective
> Rust 1.81 released the #[expect(...)] attribute, which works like
#[allow(...)] but throws a warning if the lint isn't raised. This is
preferred to #[allow(...)] because it tells us when it can be removed.
- Adopts the parts of #15118 that are complete, and updates the branch
so it can be merged.
- There were a few conflicts, let me know if I misjudged any of 'em.
Alice's
[recommendation](https://github.com/bevyengine/bevy/issues/15059#issuecomment-2349263900)
seems well-taken, let's do this crate by crate now that @BD103 has done
the lion's share of this!
(Relates to, but doesn't yet completely finish #15059.)
Crates this _doesn't_ cover:
- bevy_input
- bevy_gilrs
- bevy_window
- bevy_winit
- bevy_state
- bevy_render
- bevy_picking
- bevy_core_pipeline
- bevy_sprite
- bevy_text
- bevy_pbr
- bevy_ui
- bevy_gltf
- bevy_gizmos
- bevy_dev_tools
- bevy_internal
- bevy_dylib
---------
Co-authored-by: BD103 <59022059+BD103@users.noreply.github.com>
Co-authored-by: Ben Frankel <ben.frankel7@gmail.com>
Co-authored-by: Antony <antony.m.3012@gmail.com>
# Objective
There may be times where a function in the `FunctionRegistry` doesn't
need to be fully retrieved. A user may just need to call it with a set
of arguments.
We should provide a shortcut for doing this.
## Solution
Add the `FunctionRegistry::call` method to directly call a function in
the registry with the given name and arguments.
## Testing
You can test locally by running:
```
cargo test --package bevy_reflect --all-features
```
No hard feelings if you don't want to make this change. This is just
something I stumbled over in my very first read of the `bevy_ecs` crate.
# Objective
- the general goal here is to improve DX slightly
- make the code easier to read in general. The previous names make the
code harder to read, especially since they are so similar.
## Solution
- choose more specific names for the fields
- `index_iter` -> `freelist_indices` : "freelist" is a well established
term in the rest of the docs in this module, so we might want to reuse
it
- `index_range` -> `new_indices` : Nothing besides the doc comment
stated that these indices were actually new/fresh
## Testing
Note that the fields are private so that this is no breaking change.
They are also only used in this one module.
# Objective
- Intended to resolve https://github.com/bevyengine/bevy/issues/15290.
- Fix four duplicate `DragEnd` firing when drag finished.
- Fix redundant `DragStart` firing when dragging across pick-able
entities.
- Fix `Click` coming after `Drop` and obliterating finished drag
interactions.
Big thanks to B. Reinhart for testing picking in their codebase and
identifying these issues early.
## Solution
- Fix press & drag state being cleared after the first entity is read
from the hover map on pointer release, rather than after all entities
are read. This caused only the first hovered entity to receive `Up` and
`Click` events.
- Fixes `Down` being determined using the `previous_hover_map` rather
than `hover_map`, a regression compared to `bevy_mod_picking`. I think
this is what was messing up drag events.
- Fixes and issue where `PointerEnd` would fire multiple times and
`PointerStart` would fire when dragging onto a new entity.
- Re-orders events to make them easier to handle. `Out` now fired before
`DragLeave` and `Click/Up` now fire before `DragDrop`.
- Generally refactors the picking event code to be more clean and sane.
## Testing
These changes are currently sporadically tested.
# Objective
- Remove an int2ptr cast in `bevy_ptr::dangling_with_align`
- This is flagged by MIRI unless `-Zmiri-permissive-provenance` is used
(like in CI)
- Remove `-Zmiri-permissive-provenance` in CI
## Solution
- Create the raw pointer like
[`std::ptr::without_provenance`](https://doc.rust-lang.org/stable/std/ptr/fn.without_provenance_mut.html)
does, i.e. by starting from a null pointer.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: François Mockers <francois.mockers@vleue.com>
# Objective
- The multithreaded executor has some weird UB related to stacked
borrows and async blocks
- See my explanation on discord
https://discord.com/channels/691052431525675048/749335865876021248/1286359267921887232
- Closes#15296 (can this be used to close PRs?)
## Solution
- Don't create a `&mut World` reference outside `async` blocks and then
capture it, but instead directly create it inside the `async` blocks.
This avoids it being captured, which has some weird requirement on its
validity.
## Testing
- Added a regression test
Added a `HeadlessPlugins` plugin group, that adds more default
functionality (like logging) than the `MinimumPlugins`. Fixes#15203
Changed the headless example to use the new plugin group.
I am not entirely sure if the list of plugins is correct. Are there ones
that should be added / removed?
----
The `TerminalCtrlCHandlerPlugin` has interesting effects in the headless
example: Installing it a second time it will give a log message about
skipping installation, because it is already installed. Ctrl+C will
terminate the application in that case. However, _not_ installing it the
second time (so only on the app that runs once) has the effect that the
app that runs continuously cannot be stopped using Ctrl+C.
This implies that, even though the second app did not install the Ctrl+C
handler, it did _something_ because it was keeping the one from the
first app alive.
Not sure if this is a problem or issue, or can be labeled a wierd quirk
of having multiple Apps in one executable.
# Objective
- I was running miri locally to check the UB in #15276 and it detected
an unrelated memory leak, due to the `RawCommandQueue` changes. (I
probably should have turned the leak detection off because we do
purposely leak interned string labels and I assume that's why CI didn't
detect it.)
## Solution
- The memory allocated to `RawCommandQueue` needs to be manually
dropped. This was being done for `bytes` and `cursor`, but was missed
for `panic_recovery`.
## Testing
- Ran miri locally and the related memory leaks errors when away.
`ShortName` is lazily evaluated and does not allocate, instead providing
`Display` and `Debug` implementations which write directly to a
formatter using the original algorithm. When using `ShortName` in format
strings (`panic`, `dbg`, `format`, etc.) you can directly use the
`ShortName` type. If you require a `String`, simply call
`ShortName(...).to_string()`.
# Objective
- Remove the requirement for allocation when using `get_short_name`
## Solution
- Added new type `ShortName` which wraps a name and provides its own
`Debug` and `Display` implementations, using the original
`get_short_name` algorithm without the need for allocating.
- Removed `get_short_name`, as `ShortName(...)` is more performant and
ergonomic.
- Added `ShortName::of::<T>` method to streamline the common use-case
for name shortening.
## Testing
- CI
## Migration Guide
### For `format!`, `dbg!`, `panic!`, etc.
```rust
// Before
panic!("{} is too short!", get_short_name(name));
// After
panic!("{} is too short!", ShortName(name));
```
### Need a `String` Value
```rust
// Before
let short: String = get_short_name(name);
// After
let short: String = ShortName(name).to_string();
```
## Notes
`ShortName` lazily evaluates, and directly writes to a formatter via
`Debug` and `Display`, which removes the need to allocate a `String`
when printing a shortened type name. Because the implementation has been
moved into the `fmt` method, repeated printing of the `ShortName` type
may be less performant than converting it into a `String`. However, no
instances of this are present in Bevy, and the user can get the original
behaviour by calling `.to_string()` at no extra cost.
---------
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
# Objective
It's convenient to be able to modify a component if it exist, and insert
a default value if it doesn't. You can already do most of this with
`EntityCommands::insert_if_new`, and all of this using a custom command.
However, that does not spark joy in my opinion.
Closes#10669
## Solution
Introduce a new commands type `EntityEntryCommands`, along with a method
to access it, `EntityCommands::entry`.
`EntityEntryCommands` exposes a subset of the entry API (`and_modify`,
`or_insert`, etc), however it's not an enum so it doesn't allow pattern
matching. Also, `or_insert` won't return the component because it's all
based on commands.
## Testing
Added a new test `entity_commands_entry`.
---
## Showcase
```rust
commands
.entity(player)
.entry::<Level>()
.and_modify(|mut lvl| lvl.0 += 1)
.or_default();
```
---------
Co-authored-by: Jan Hohenheim <jan@hohenheim.ch>
[*Percentage-closer soft shadows*] are a technique from 2004 that allow
shadows to become blurrier farther from the objects that cast them. It
works by introducing a *blocker search* step that runs before the normal
shadow map sampling. The blocker search step detects the difference
between the depth of the fragment being rasterized and the depth of the
nearby samples in the depth buffer. Larger depth differences result in a
larger penumbra and therefore a blurrier shadow.
To enable PCSS, fill in the `soft_shadow_size` value in
`DirectionalLight`, `PointLight`, or `SpotLight`, as appropriate. This
shadow size value represents the size of the light and should be tuned
as appropriate for your scene. Higher values result in a wider penumbra
(i.e. blurrier shadows).
When using PCSS, temporal shadow maps
(`ShadowFilteringMethod::Temporal`) are recommended. If you don't use
`ShadowFilteringMethod::Temporal` and instead use
`ShadowFilteringMethod::Gaussian`, Bevy will use the same technique as
`Temporal`, but the result won't vary over time. This produces a rather
noisy result. Doing better would likely require downsampling the shadow
map, which would be complex and slower (and would require PR #13003 to
land first).
In addition to PCSS, this commit makes the near Z plane for the shadow
map configurable on a per-light basis. Previously, it had been hardcoded
to 0.1 meters. This change was necessary to make the point light shadow
map in the example look reasonable, as otherwise the shadows appeared
far too aliased.
A new example, `pcss`, has been added. It demonstrates the
percentage-closer soft shadow technique with directional lights, point
lights, spot lights, non-temporal operation, and temporal operation. The
assets are my original work.
Both temporal and non-temporal shadows are rather noisy in the example,
and, as mentioned before, this is unavoidable without downsampling the
depth buffer, which we can't do yet. Note also that the shadows don't
look particularly great for point lights; the example simply isn't an
ideal scene for them. Nevertheless, I felt that the benefits of the
ability to do a side-by-side comparison of directional and point lights
outweighed the unsightliness of the point light shadows in that example,
so I kept the point light feature in.
Fixes#3631.
[*Percentage-closer soft shadows*]:
https://developer.download.nvidia.com/shaderlibrary/docs/shadow_PCSS.pdf
## Changelog
### Added
* Percentage-closer soft shadows (PCSS) are now supported, allowing
shadows to become blurrier as they stretch away from objects. To use
them, set the `soft_shadow_size` field in `DirectionalLight`,
`PointLight`, or `SpotLight`, as applicable.
* The near Z value for shadow maps is now customizable via the
`shadow_map_near_z` field in `DirectionalLight`, `PointLight`, and
`SpotLight`.
## Screenshots
PCSS off:
PCSS on:
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Torstein Grindvik <52322338+torsteingrindvik@users.noreply.github.com>
# Objective
- Adjust `bevy_utils` to make it `no_std` compatible
- Partially replaces #6581
- Contributes to #8161
- Contributes to #6370
## Solution
Added `alloc` and `std` features to `bevy_utils` (`std` is enabled by
default), allowing the crate's use in `no_std` contexts.
## Testing
- CI passed locally.
- Used `bevy_utils` in a `no_std` crate as an experiment and compiled
successfully.
## Migration Guide
If you were importing `bevy_utils` and setting `default_features` to
`false`, but relying on elements which are now gated behind the `std` or
`alloc` features, include the relevant feature in your `Cargo.toml`.
## Notes
- Bevy already includes a single `no_std` crate, `bevy_ptr`, so there is
precedent for this change.
- As `bevy_utils` is widely used across the rest of Bevy, further work
to make Bevy `no_std` compatible would be blocked on this crate, if such
work was to be undertaken.
- Most of the changes in this PR are just the removal of an unnecessary
call to `to_string()` within unit tests.
Enabled `check-private-items` in `clippy.toml` and then fixed the
resulting errors. Most of these were simply misformatted and of the
remaining:
- ~Added `#[allow(clippy::missing_safety_doc)]` to~ Removed unsafe from
a pair of functions in `bevy_utils/futures` which are only unsafe so
that they can be passed to a function which requires `unsafe fn`
- Removed `unsafe` from `UnsafeWorldCell::observers` as from what I can
tell it is always safe like `components`, `bundles` etc. (this should be
checked)
- Added safety docs to:
- `Bundles::get_storage_unchecked`: Based on the function that writes to
`dynamic_component_storages`
- `Bundles::get_storages_unchecked`: Based on the function that writes
to `dynamic_bundle_storages`
- `QueryIterationCursor::init_empty`: Duplicated from `init`
- `QueryIterationCursor::peek_last`: Thanks Giooschi (also added
internal unsafe blocks)
- `tests::drop_ptr`: Moved safety comment out to the doc string
This lint would also apply to `missing_errors_doc`, `missing_panics_doc`
and `unnecessary_safety_doc` if we chose to enable any of those at some
point, although there is an open
[issue](https://github.com/rust-lang/rust-clippy/issues/13074) to
separate these options.
# Objective
Make it clear to the user why their program is failing rather than
having an unhelpful `called Option::unwrap() on a None value` message.
## Solution
Change the `unwrap()` calls to `expect()` calls, mirroring previously
implemented error messages.
## Testing
I have not tested these changes, but they are fairly trivial so I do not
necessarily feel they need it.
# Objective
When deriving `Reflect`, users will notice that their generic arguments
also need to implement `Reflect`:
```rust
#[derive(Reflect)]
struct Foo<T: Reflect> {
value: T
}
```
This works well for now. However, as we want to do more with `Reflect`,
these bounds might need to change. For example, to get #4154 working, we
likely need to enforce the `GetTypeRegistration` trait. So now we have:
```rust
#[derive(Reflect)]
struct Foo<T: Reflect + GetTypeRegistration> {
value: T
}
```
Not great, but not horrible. However, we might then want to do something
as suggested in
[this](https://github.com/bevyengine/bevy/issues/5745#issuecomment-1221389131)
comment and add a `ReflectTypeName` trait for stable type name support.
Well now we have:
```rust
#[derive(Reflect)]
struct Foo<T: Reflect + GetTypeRegistration + ReflectTypeName> {
value: T
}
```
Now imagine that for even two or three generic types. Yikes!
As the API changes it would be nice if users didn't need to manually
migrate their generic type bounds like this.
A lot of these traits are (or will/might be) core to the entire
reflection API. And although `Reflect` can't add them as supertraits for
object-safety reasons, they are still indirectly required for things to
function properly (manual implementors will know how easy it is to
forget to implement `GetTypeRegistration`). And they should all be
automatically implemented for user types anyways as long they're using
`#[derive(Reflect)]`.
## Solution
Add a "catch-all" trait called `Reflectable` whose supertraits are a
select handful of core reflection traits.
This allows us to consolidate all the examples above into this:
```rust
#[derive(Reflect)]
struct Foo<T: Reflectable> {
value: T
}
```
And as we experiment with the API, users can rest easy knowing they
don't need to migrate dozens upon dozens of types. It should all be
automatic!
## Discussion
1. Thoughts on the name `Reflectable`? Is it too easily confused with
`Reflect`? Or does it at least accurately describe that this contains
the core traits? If not, maybe `BaseReflect`?
---
## Changelog
- Added the `Reflectable` trait
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Fixes#15258
## Solution
If my understanding is correct, sprites with NaN anywhere in their
transform won't even get onto the screen, so should not generate pick
events. This PR filters sprites with NaN in their transforms before
sorting by depth, then uses `FloatOrd` to simplify the comparison. Since
we're guaranteed to not have NaN values, it's technically unnecessary,
and we could instead sort with `a.partial_cmp(&b).unwrap()`, or even
`unwrap_unchecked()`.
## Testing
I ran the picking example to ensure Z sorting was working as intended.
# Objective
Asset processing (added as part of #8624) is a powerful, high-impact
feature, but has been widely underused (and underdeveloped) due to poor
developer understanding.
## Solution
In this PR, I've documented what asset processing is, why it's useful,
and pointed users to the two primary entry points.
While I would like substantially more involved practical examples for
how to perform common asset-processing tasks, I've split them out from
this PR for ease of review (and actually submitting this for review
before the weekend).
We should add bread crumbs from the module docs to these docs, but
whether we add that here or in #15056 depends on which gets merged
first.
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
Bevy's asset system is powerful and generally well-designed but very
opaque.
Beginners struggle to discover how to do simple tasks and grok the
fundamental data models, while more advanced users trip over the
assorted traits and their relation to each other.
Reverts #15054 ;)
## Solution
This PR adds module documentation to `bevy_assets`, tweaking the
associated documentation on the items as needed to provide further
details and bread crumbs.
If you have ideas for other important, hard-to-discover patterns or
functionality in this crate, please let me know.
That said, I've left out a section on asset preprocessing which *should*
eventually go here. That is substantially more uncertain, and requires
both more time to investigate and more expertise to review.
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
Co-authored-by: TrialDragon <31419708+TrialDragon@users.noreply.github.com>
Co-authored-by: NotAFile <notafile@gmail.com>
Co-authored-by: Zachary Harrold <zac@harrold.com.au>
Co-authored-by: JMS55 <47158642+JMS55@users.noreply.github.com>
Co-authored-by: Jan Hohenheim <jan@hohenheim.ch>
# Objective
Two of the `IntoSystemConfigs` `impl`s are out of place near the top of
the file.
## Solution
Put them below the `IntoSystemConfigs` trait definition, alongside the
other `impl`.
# Objective
Fixes#15223
## Solution
Adds an `enabled` flag to the `FpsOverlayConfig` resource with a system
that detects it's change, and adjusts the visibility of the overlay text
entity.
## Testing
I extended the `fps_overlay` example with the option to toggle the
overlay. Run with:
```
cargo run --features="bevy_dev_tools" --example fps_overlay
```
This commit adds two new `WorldQuery` types: `EntityRefExcept` and
`EntityMutExcept`. These types work just like `EntityRef` and
`EntityMut`, but they prevent access to a statically-specified list of
components. For example, `EntityMutExcept<(AnimationPlayer,
Handle<AnimationGraph>)>` provides mutable access to all components
except for `AnimationPlayer` and `Handle<AnimationGraph>`. These types
are useful when you need to be able to process arbitrary queries while
iterating over the results of another `EntityMut` query.
The motivating use case is *generalized animation*, which is an upcoming
feature that allows animation of any component property, not just
rotation, translation, scaling, or morph weights. To implement this, we
must change the current `AnyOf<(&mut Transform, &mut MorphWeights)>` to
instead be `EntityMutExcept<(AnimationPlayer, Handle<AnimationGraph>)>`.
It's possible to use `FilteredEntityMut` in conjunction with a
dynamically-generated system instead, but `FilteredEntityMut` isn't
optimized for the use case of a large number of allowed components
coupled with a small set of disallowed components. No amount of
optimization of `FilteredEntityMut` produced acceptable performance on
the `many_foxes` benchmark. `Query<EntityMut, Without<AnimationPlayer>>`
will not suffice either, as it's legal and idiomatic for an
`AnimationTarget` and an `AnimationPlayer` to coexist on the same
entity.
An alternate proposal was to implement a somewhat-more-general
`Except<Q, CL>` feature, where Q is a `WorldQuery` and CL is a
`ComponentList`. I wasn't able to implement that proposal in a
reasonable way, because of the fact that methods like
`EntityMut::get_mut` and `EntityRef::get` are inherent methods instead
of methods on `WorldQuery`, and therefore there was no way to delegate
methods like `get` and `get_mut` to the inner query in a generic way.
Refactoring those methods into a trait would probably be possible.
However, I didn't see a use case for a hypothetical `Except` with
arbitrary queries: `Query<Except<(&Transform, &Visibility),
Visibility>>` would just be a complicated equivalent to
`Query<&Transform>`, for instance. So, out of a desire for simplicity, I
omitted a generic `Except` mechanism.
I've tested the performance of generalized animation on `many_foxes` and
found that, with this patch, `animate_targets` has a 7.4% slowdown over
`main`. With `FilteredEntityMut` optimized to use `Arc<Access>`, the
slowdown is 75.6%, due to contention on the reference count. Without
`Arc<Access>`, the slowdown is even worse, over 2x.
## Testing
New tests have been added that check that `EntityRefExcept` and
`EntityMutExcept` allow and disallow access to components properly and
that the query engine can correctly reject conflicting queries involving
those types.
A Tracy profile of `many_foxes` with 10,000 foxes showing generalized
animation using `FilteredEntityMut` (red) vs. main (yellow) is as
follows:
A Tracy profile of `many_foxes` with 10,000 foxes showing generalized
animation using this `EntityMutExcept` (yellow) vs. main (red) is as
follows:
# Objective
- Fixes#15106
## Solution
- Trivial refactor to rename the method. The duplicate method `push` was
removed as well. This will simpify the API and make the semantics more
clear. `Add` implies that the action happens immediately, whereas in
reality, the command is queued to be run eventually.
- `ChildBuilder::add_command` has similarly been renamed to
`queue_command`.
## Testing
Unit tests should suffice for this simple refactor.
---
## Migration Guide
- `Commands::add` and `Commands::push` have been replaced with
`Commnads::queue`.
- `ChildBuilder::add_command` has been renamed to
`ChildBuilder::queue_command`.
# Objective
Currently the resource doesn't get dropped if thread panics. This is
presumably to prevent !SEND resource from being dropped by wrong thread.
But, this logic is not needed for SEND resources. So we don't need this
check for SEND resource.
Fixes#15144
## Solution
We check if resource is !SEND before, validating that correct thread is
dropping the resource.
## Testing
- Did you test these changes? If so, how?
I did run cargo test on bevy.
- Are there any parts that need more testing?
No
- How can other people (reviewers) test your changes? Is there anything
specific they need to know?
Nothing special
- If relevant, what platforms did you test these changes on, and are
there any important ones you can't test?
x86_64 desktop
Updates the requirements on
[gilrs](https://gitlab.com/gilrs-project/gilrs) to permit the latest
version.
<details>
<summary>Commits</summary>
<ul>
<li><a
href="cbcff6a4cd"><code>cbcff6a</code></a>
Speed up CI by testing only on x86_64-pc-windows-msvc from Windows’
targets</li>
<li><a
href="78582dd9df"><code>78582dd</code></a>
Update deps and prepare for gilrs 0.11.0 and gilrs-core 0.6.0</li>
<li><a
href="aad5c1072d"><code>aad5c10</code></a>
Mark error enums, Event and EventType as non_exhaustive</li>
<li><a
href="ec5d668d6b"><code>ec5d668</code></a>
Fix potential overflow in btn_value()</li>
<li><a
href="59811ff850"><code>59811ff</code></a>
Prepare for gilrs-core 0.5.15 release</li>
<li><a
href="aeaeb747d7"><code>aeaeb74</code></a>
windows: Don’t panic on Reading::update() returning error</li>
<li><a
href="d26e37f121"><code>d26e37f</code></a>
windows: Remove event handlers on drop</li>
<li><a
href="daf263d3cc"><code>daf263d</code></a>
Prevent crash in WASM backend when browser assigns gamepad unexpected
ID</li>
<li><a
href="5f7b786f83"><code>5f7b786</code></a>
Upgrade SDL_GameControllerDB.</li>
<li><a
href="3d92b2e15a"><code>3d92b2e</code></a>
gilrs-core version 0.5.13</li>
<li>Additional commits viewable in <a
href="https://gitlab.com/gilrs-project/gilrs/compare/v0.10.1...v0.11.0">compare
view</a></li>
</ul>
</details>
<br />
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Objective
- Fixes#15236
## Solution
- Use bevy_math::ops instead of std floating point operations.
## Testing
- Did you test these changes? If so, how?
Unit tests and `cargo run -p ci -- test`
- How can other people (reviewers) test your changes? Is there anything
specific they need to know?
Execute `cargo run -p ci -- test` on Windows.
- If relevant, what platforms did you test these changes on, and are
there any important ones you can't test?
Windows
## Migration Guide
- Not a breaking change
- Projects should use bevy math where applicable
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: IQuick 143 <IQuick143cz@gmail.com>
Co-authored-by: Joona Aalto <jondolf.dev@gmail.com>
# Objective
- Makes naming between add_child and add_children more consistent
- Fixes#15101
## Solution
renamed push_children to add_children
## Testing
- Did you test these changes? If so, how?
Ran tests + grep search for any instance of `push_child`
- Are there any parts that need more testing?
- How can other people (reviewers) test your changes? Is there anything
specific they need to know?
- If relevant, what platforms did you test these changes on, and are
there any important ones you can't test?
ran tests on WSL2
---
## Migration Guide
> This section is optional. If there are no breaking changes, you can
delete this section.
- If this PR is a breaking change (relative to the last release of
Bevy), describe how a user might need to migrate their code to support
these changes
rename any use of `push_children()` to the updated `add_children()`
# Objective
Currently, UI is always rendered with anti-aliasing. This makes bevy's
UI completely unsuitable for art-styles that demands hard pixelated
edges, such as retro-style games.
## Solution
Add a component for disabling anti-aliasing in UI.
## Testing
In
[`examples/ui/button.rs`](15e246eff8/examples/ui/button.rs),
add the component to the camera like this:
```rust
use bevy::{prelude::*, ui::prelude::*};
commands.spawn((Camera2dBundle::default(), UiAntiAlias::Off));
```
The rounded button will now render without anti-aliasing.
## Showcase
An example of a rounded UI node rendered without anti-aliasing, with and
without borders:
# Objective
- Another way of specifying rotations was requested in
https://github.com/bevyengine/bevy/issues/11132#issuecomment-2344603178
## Solution
- Add methods on `Rot2`
- `turn_fraction(fraction: f32) -> Self`
- `as_turn_fraction(self) -> f32`
- Also add some documentation on range of rotation
## Testing
- extended existing tests
- added new tests
## Showcase
```rust
let rotation1 = Rot2::degrees(90.0);
let rotation2 = Rot2::turn_fraction(0.25);
// rotations should be equal
assert_relative_eq!(rotation1, rotation2);
// The rotation should be 90 degrees
assert_relative_eq!(rotation2.as_radians(), FRAC_PI_2);
assert_relative_eq!(rotation2.as_degrees(), 90.0);
```
---------
Co-authored-by: Joona Aalto <jondolf.dev@gmail.com>
Co-authored-by: Jan Hohenheim <jan@hohenheim.ch>
# Objective
- Adds the missing API commands `insert_if_new_and` and
`try_insert_if_new_and` (resolves#15105)
- Adds some test coverage for existing insert commands
## Testing
- Implemented additional unit tests to add coverage
# Objective
Right now, `DynSystemParam::downcast()` always requires the type
parameter to be specified with a turbofish. Make it so that it can be
inferred from the use of the return value, like:
```rust
fn expects_res_a(mut param: DynSystemParam) {
let res: Res<A> = param.downcast().unwrap();
}
```
## Solution
The reason this doesn't currently work is that the type parameter is a
`'static` version of the `SystemParam` so that it can be used with
`Any::downcast_mut()`. Change the method signature so that the type
parameter matches the return type, and use `T::Item<'static, 'static>`
to get the `'static` version. That means we wind up returning a
`T::Item<'static, 'static>::Item<'w, 's>`, so constrain that to be equal
to `T`. That works with every `SystemParam` implementation, since they
have `T::Item == T` up to lifetimes.
# Objective
Fixes#14540
## Solution
- Clean slab layouts from stale `SlabId`s when freeing meshes
- Technically performance requirements of freeing now increase based on
the number of existing meshes, but maybe it doesn't matter too much in
practice
- This was the case before this PR too, but it's technically possible to
free and allocate 2^32 times and overflow with `SlabId`s and cause
incorrect behavior. It looks like new meshes would then override old
ones.
## Testing
- Tested in `loading_screen` example and tapping keyboard 1 and 2.
# Objective
- fix#12853
- Make `Table::allocate` faster
## Solution
The PR consists of multiple steps:
1) For the component data: create a new data-structure that's similar to
`BlobVec` but doesn't store `len` & `capacity` inside of it: "BlobArray"
(name suggestions welcome)
2) For the `Tick` data: create a new data-structure that's similar to
`ThinSlicePtr` but supports dynamic reallocation: "ThinArrayPtr" (name
suggestions welcome)
3) Create a new data-structure that's very similar to `Column` that
doesn't store `len` & `capacity` inside of it: "ThinColumn"
4) Adjust the `Table` implementation to use `ThinColumn` instead of
`Column`
The result is that only one set of `len` & `capacity` is stored in
`Table`, in `Table::entities`
### Notes Regarding Performance
Apart from shaving off some excess memory in `Table`, the changes have
also brought noteworthy performance improvements:
The previous implementation relied on `Vec::reserve` &
`BlobVec::reserve`, but that redundantly repeated the same if statement
(`capacity` == `len`). Now that check could be made at the `Table` level
because the capacity and length of all the columns are synchronized;
saving N branches per allocation. The result is a respectable
performance improvement per every `Table::reserve` (and subsequently
`Table::allocate`) call.
I'm hesitant to give exact numbers because I don't have a lot of
experience in profiling and benchmarking, but these are the results I
got so far:
*`add_remove_big/table` benchmark after the implementation:*
*`add_remove_big/table` benchmark in main branch (measured in comparison
to the implementation):*
*`add_remove_very_big/table` benchmark after the implementation:*
*`add_remove_very_big/table` benchmark in main branch (measured in
comparison to the implementation):*
cc @james7132 to verify
---
## Changelog
- New data-structure that's similar to `BlobVec` but doesn't store `len`
& `capacity` inside of it: `BlobArray`
- New data-structure that's similar to `ThinSlicePtr` but supports
dynamic allocation:`ThinArrayPtr`
- New data-structure that's very similar to `Column` that doesn't store
`len` & `capacity` inside of it: `ThinColumn`
- Adjust the `Table` implementation to use `ThinColumn` instead of
`Column`
- New benchmark: `add_remove_very_big` to benchmark the performance of
spawning a lot of entities with a lot of components (15) each
## Migration Guide
`Table` now uses `ThinColumn` instead of `Column`. That means that
methods that previously returned `Column`, will now return `ThinColumn`
instead.
`ThinColumn` has a much more limited and low-level API, but you can
still achieve the same things in `ThinColumn` as you did in `Column`.
For example, instead of calling `Column::get_added_tick`, you'd call
`ThinColumn::get_added_ticks_slice` and index it to get the specific
added tick.
---------
Co-authored-by: James Liu <contact@jamessliu.com>
# Objective
It would be convenient to be able to quickly deny or allow all
components and resources on a `DynamicSceneBuilder` with a single method
call.
Context: #15210 renamed `{allow/deny}_all` to
`{allow/deny}_all_components`.
## Solution
Added two new methods to `DynamicSceneBuilder`, `allow_all` and
`deny_all`, which affect both the component and resource filters.
## Showcase
### Before
```rust
let builder = DynamicSceneBuilder::from_world(world)
.deny_all_components()
.deny_all_resources();
```
### After
```rust
let builder = DynamicSceneBuilder::from_world(world).deny_all();
```
The function `bevy_input::schedule::condition::Condition::or_else` has
been deprecated in favor of
`bevy_input::schedule::condition::Condition::or`. However the docs for
`ButtonInput` were still using the deprecated function in their example.
