Commit graph

21493 commits

Author SHA1 Message Date
Simon Glass
ea2ca7e17e spi: Rename SPI_SUPPORT to SPI
Rename these options so that CONFIG_IS_ENABLED can be used with them.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-04 12:26:02 -04:00
Simon Glass
2a73606668 serial: Rename SERIAL_SUPPORT to SERIAL
Rename these options so that CONFIG_IS_ENABLED can be used with them.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-04 12:26:01 -04:00
Simon Glass
15042e7b9b pch: Rename PCH_SUPPORT to PCH
Rename these options so that CONFIG_IS_ENABLED can be used with them.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-04 11:42:41 -04:00
Simon Glass
103c5f1806 mmc: Rename MMC_SUPPORT to MMC
Rename these options so that CONFIG_IS_ENABLED can be used with them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
[trini: Fixup some incorrect renames]
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-04 11:42:41 -04:00
Tom Rini
0017931971 Revert most of the series for adding vexpress_aemv8r support
Per a request from Andre Przywara and agreed with by Peter Hoyes, the
vexpress aemv8r support wasn't quite ready to be merged, but the
discussion had moved off list.  We should keep the first patch in the
series for now, but revert the rest.  This reverts the following
commits:

e0bd6f31ce doc: Add documentation for the Arm vexpress board configs
30e5a449e8 arm: Use armv8_switch_to_el1 env to switch to EL1
b53bbca63b vexpress64: Add BASER_FVP vexpress board variant
2f5b7b7490 armv8: Add ARMv8 MPU configuration logic
37a757e227 armv8: Ensure EL1&0 VMSA is enabled

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-03 10:42:15 -04:00
Oleksandr Suvorov
7befc8490a psci: fix double declaration
The prototype of psci_features() duplicated. Remove extra declaration.

Fixed: e21e3ffdd1 ("psci: Fix warnings when compiling with W=1")
Reported-by: Michael Scott <mike@foundries.io>
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
2021-09-02 11:19:58 -04:00
Samuel Holland
f43312c974 ARM: Prevent the compiler from using NEON registers
For ARMv8-A, NEON is standard, so the compiler can use it even when no
special target flags are provided. For example, it can use stores from
NEON registers to zero-initialize large structures. GCC 11 decides to
do this inside the DRAM init code for the Allwinner H6.

However, GCC 11 has a bug where it generates misaligned NEON register
stores even with -mstrict-align. Since the MMU is not enabled this early
in SPL, the misaligned store causes an exception and breaks booting.

Work around this issue by restricting the compiler to using GPRs only,
not vector registers. This prevents any future surprises relating to
NEON use as well.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Andre Przywara <andre.przywara@arm.com>
2021-09-02 11:19:58 -04:00
Peter Hoyes
30e5a449e8 arm: Use armv8_switch_to_el1 env to switch to EL1
Use the environment variable armv8_switch_to_el1 to determine whether
to switch to EL1 at runtime. This is an alternative to the
CONFIG_ARMV8_SWITCH_TO_EL1 compile-time option.

The environment variable will be ineffective if the ARMV8_MULTIENTRY
config is used.

This is required by the Armv8r64 architecture, which must be able to
boot at S-EL1 for Linux but may need to boot at other ELs for other
systems.

Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
2021-09-02 10:17:45 -04:00
Peter Hoyes
b53bbca63b vexpress64: Add BASER_FVP vexpress board variant
The BASER_FVP board variant is implemented on top of the BASE_FVP board
config (which, in turn, is based on the Juno Versatile Express board
config). They all share a similar memory map - for BASER_FVP the map is
inverted from the BASE_FVP
(https://developer.arm.com/documentation/100964/1114/Base-Platform/Base---memory/BaseR-Platform-memory-map)

 * Create new TARGET_VEXPRESS64_BASER_FVP target, which uses the same
   board config as BASE_FVP and JUNO
 * Adapt vexpress_aemv8a.h header file to support BASER_FVP (and rename
   to vexpress_aemv8.h)
 * Enable config to switch to EL1 for the BASER_FVP
 * Create vexpress_aemv8r defconfig
 * Provide an MPU memory map for the BASER_FVP

For now, only single core boot is supported.

Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
[trini: Add MAINTAINERS, move BOOTCOMMAND to defconfig]
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-02 10:17:45 -04:00
Peter Hoyes
2f5b7b7490 armv8: Add ARMv8 MPU configuration logic
Armv8r64 is the first Armv8 platform that only has a PMSA at the
current exception level. The architecture supplement for Armv8r64
describes new fields in ID_AA64MMFR0_EL1 which can be used to detect
whether a VMSA or PMSA is present. These fields are RES0 on Armv8a.

Add logic to read these fields and, for the protection of the memory
used by U-Boot, initialize the MPU instead of the MMU during init, then
clear the MPU regions before transition to the next stage.

Provide a default (blank) MPU memory map, which can be overridden by
board configurations.

Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
2021-09-02 10:17:45 -04:00
Peter Hoyes
37a757e227 armv8: Ensure EL1&0 VMSA is enabled
On Armv8-R, the EL1&0 memory system architecture is configurable as a
VMSA or PMSA, and resets to an "architecturally unknown" value.

Add code to armv8_switch_to_el1_m which detects whether the MSA at
EL1&0 is configurable using the id_aa64mmfr0_el1 register MSA fields.
If it is we must ensure the VMSA is enabled so that a rich OS can boot.

The MSA and MSA_FRAC fields are described in the Armv8-R architecture
profile supplement (section G1.3.7):
https://developer.arm.com/documentation/ddi0600/latest/

Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
2021-09-02 10:17:45 -04:00
Peter Hoyes
53b40e8d54 armv8: Disable pointer authentication traps for EL1
The use of ARMv8.3 pointer authentication (PAuth) is governed by fields
in HCR_EL2, which trigger a 'trap to EL2' if not enabled. The reset
value of these fields is 'architecturally unknown' so we must ensure
that the fields are enabled (to disable the traps) if we are entering
the kernel at EL1.

The APK field disables PAuth instruction traps and the API field
disables PAuth register traps

Add code to disable the traps in armv8_switch_to_el1_m. Prior to doing
so, it checks fields in the ID_AA64ISAR1_EL1 register to ensure pointer
authentication is supported by the hardware.

The runtime checks require a second temporary register, so add this to
the EL1 transition macro signature and update 2 call sites.

Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
2021-09-02 10:17:45 -04:00
Stephan Gerhold
15dd941202 arm: mach-snapdrgon: misc: Simplify msm_generate_mac_addr()
The logic in msm_generate_mac_addr() was originally taken from the LK
bootloader where the serial number is a string and must be parsed first.
However, in U-Boot msm_board_serial() returns an u32 and
msm_generate_mac_addr() has quite complicated code that will first
print it as a hex string and then immediately parse it again.

What this function actually does at the end is to put the serial number
encoded as big endian (the order used for the hex string) into the u8 *mac.
Use put_unaligned_be32() to do that with bit shifts instead of going
through the string format.

This should be slightly more efficient and cleaner but does not result
in any functional difference.

Cc: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-09-02 09:48:20 -04:00
Stephan Gerhold
1eb006249e arm: mach-snapdragon: misc: Initialize eMMC if necessary
At the moment U-Boot produces an empty MAC address (02:00:00:00:00:00)
if the eMMC is not used by anything in U-Boot (e.g. with
CONFIG_ENV_IS_NOWHERE=y instead of having the environment on eMMC).
This happens because then there is nothing that actually initializes
the eMMC and reads the "cid" that is later accessed.

To fix this, call mmc_init() to ensure the eMMC is initialized.
There is no functional difference if the eMMC is already initialized
since then mmc_init() will just return without doing anything.

Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
2021-09-02 09:48:20 -04:00
Chia-Wei Wang
cd82f19985 armv7: Add Position Independent Execution support
A U-Boot image could be loaded and executed at a different
location than it was linked at.

For example, Aspeed takes a stable release version of U-Boot image
as the golden one for recovery purposes. When the primary storage
such as flash is corrupted, the golden image would be loaded to any
SRAM/DRAM address on demands through ethernet/UART/etc and run for
rescue.

To deal with this condition, the PIE is needed as there is only one
signed, golden image, which could be however executed at different
places.

This patch adds the PIE support for ARMv7 platform.

Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
2021-09-02 09:48:20 -04:00
Chia-Wei Wang
aa29b21d62 arm: Fix option dependency with Kconfig language
Use Kconfig 'depends on' instead of #if macro to
express the option depdencies.

Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
2021-09-02 09:48:20 -04:00
Stephan Gerhold
8956854d48 arm: u8500: Prefer building in thumb mode by default
Enabling CONFIG_SYS_THUMB_BUILD produces a significantly smaller
U-Boot binary (250 KiB vs 320 KiB) that still seems to be fully
functional. Make use of that by default but keep it as "imply" so it
can be disabled for testing in case this causes trouble for someone.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
2021-09-01 19:25:37 -04:00
Stephan Gerhold
f629895fa3 board: stemmy: Update documentation
Over the time, the "stemmy" U-Boot board was tested on several other
Samsung smartphones based on ST-Ericsson NovaThor Ux500. Convert the
documentation to reStructuredText at doc/board/ste/stemmy.rst and
make the device list complete. Also note that the board now boots
into USB Fastboot instead of just ending up at the U-Boot prompt.

The device table is mostly taken from the postmarketOS wiki article
(https://wiki.postmarketos.org/wiki/ST-Ericsson_NovaThor_U8500).
All the newly added devices were tested by Linus Walleij.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
2021-09-01 19:25:37 -04:00
Stephan Gerhold
f64011e11e board: stemmy: Add basic Fastboot support
Make use of the new drivers for ARM U8500 introduced in the U-Boot
2021.10 merge window by adding basic support for USB Fastboot with
the "stemmy" board. As a first step this will always boot directly
into USB Fastboot for now with the console displayed on the screen
to make that obvious.

Samsung uses quite strange GPT partition labels on these boards,
so also add a bunch of fastboot_partition_alias_* to make this more
easy to use.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
2021-09-01 19:25:37 -04:00
Stephan Gerhold
fc9d4b123d arm: dts: u8500: u-boot: Add fixed clock for eMMC
So far there is no need for a clock driver in U-Boot because the
previous boot stage leaves all the necessary clocks on. However,
some drivers in U-Boot (e.g. arm_pl180_mmci) depend on having a clock
driver to obtain the clock frequency.

Setting up the clock drivers properly is a bit tricky on U8500,
so for now add a simple fixed-clock for the eMMC that allows obtaining
the clock frequency. This should be replaced eventually if some board
actually requires enabling some of the clocks.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
2021-09-01 19:25:37 -04:00
Stephan Gerhold
1ae43a0e23 arm: dts: u8500: Update from Linux ux500-dts-for-v5.15
Update ste-dbx5x0.dtsi, ste-ab8500.dtsi and ste-ab8505.dtsi with
the changes made in upstream Linux. They are taken from
https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik.git/
branch "ux500-dts-for-v5.15" (pending merge for Linux 5.15).

The only relevant change for U-Boot here is
"ARM: dts: ux500: ab8500: Link USB PHY to USB controller node" [1]
which links the USB PHY to the USB controller. This is necessary on
U-Boot because the PHY driver is implemented as part of the generic
PHY subsystem that makes use of these bindings.

[1]: https://lore.kernel.org/linux-arm-kernel/20210709182234.47232-1-stephan@gerhold.net/

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
2021-09-01 19:25:37 -04:00
Stephan Gerhold
9f78ccf186 arm: u8500: Imply options for new drivers
Imply the options for new drivers added for ARM U8500 during the
U-Boot 2021.10 merge window. Adding these as "imply" in the Kconfig
avoids having to add them to all the board defconfigs but still allows
disabling them if wanted.

Also select DM_USB_GADGET if DM_USB is selected because otherwise
the Ux500 MUSB glue driver does not show up in the configuration.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
2021-09-01 19:25:37 -04:00
Tom Rini
48cf96fbdf Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvell
- mvebu: a38x: Define supported UART baudrates (Pali)
- kwbimage: Misc improvements (Pali)
- espressobin/turris_mox/turris_omnia: Enable some more devices
  like SATA via PCIe, SATA & NVMe (Pali)
- a37xx: Remove unused CONFIG_DEBUG_UART_SHIFT options (Pali)
- turris_omnia: Disable MCU watchdog in SPL when booting over
  UART (Marek)
- kwbimage: Fix some Coverity issue (Heinrich)
2021-09-01 10:11:21 -04:00
Marek Behún
dc595e3e45 arm: mvebu: Move get_boot_device() to cpu.c and make visible
Move the function get_boot_device() from spl.c to cpu.c.

Make it visible, so that it may be used from other files.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-09-01 08:09:24 +02:00
Pali Rohár
3404aa4646 arm: mvebu: axp: Properly check for Armada XP in mach/soc.h
File mach/soc.h is included also in 64-bit mvebu processors, so define
Armada XP related macros only when compiling for Armada XP.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-09-01 08:07:04 +02:00
Tom Rini
e2e5eec6ce Merge branch 'next' of https://gitlab.denx.de/u-boot/custodians/u-boot-marvell into next
- Handling all DM watchdogs in watchdog_reset() (Rasmus)
2021-08-31 19:11:15 -04:00
Tom Rini
b15a17be0c Merge https://gitlab.denx.de/u-boot/custodians/u-boot-sh 2021-08-31 18:37:25 -04:00
Michal Simek
b4c2c151b1 Kconfig: Remove all default n/no options
default n/no doesn't need to be specified. It is default option anyway.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
[trini: Rework FSP_USE_UPD portion]
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-31 17:47:49 -04:00
Tom Rini
a2ac2b964b Convert CONFIG_SKIP_LOWLEVEL_INIT et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SKIP_LOWLEVEL_INIT
   CONFIG_SKIP_LOWLEVEL_INIT_ONLY

In order to do this, we need to introduce SPL and TPL variants of these
options so that we can clearly disable these options only in SPL in some
cases, and both instances in other cases.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-31 17:47:49 -04:00
Tom Rini
ab92b38a01 Finish converting CONFIG_SYS_CACHELINE_SIZE to Kconfig
We move the SYS_CACHE_SHIFT_N options from arch/arm/Kconfig to
arch/Kconfig, and introduce SYS_CACHE_SHIFT_4 to provide a size of 16.
Introduce select statements for other architectures based on current
usage.  For MIPS, we take the existing arch-specific symbol and migrate
to the generic symbol.  This lets us remove a little bit of otherwise
unused code.

Cc: Alexey Brodkin <alexey.brodkin@synopsys.com>
Cc: Anup Patel <anup.patel@wdc.com>
Cc: Atish Patra <atish.patra@wdc.com>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Leo <ycliang@andestech.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Rick Chen <rick@andestech.com>
2021-08-31 17:47:49 -04:00
Tom Rini
148b8bb4b6 imx: Finish migration of IMX_CONFIG to Kconfig
- Provide a default Kconfig value of the default script
- Largely continue to define this via the board Kconfig file
- For the boards that select a script based on defconfig rather than
  TARGET, keep this within the defconfig.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-31 17:46:37 -04:00
Tom Rini
0c2729edad imx: Introduce CONFIG_MACH_IMX
Currently, there is no over-arching symbol for access to
arch/arm/mach-imx nor the CONFIG symbols that are common over all of
these related platforms.  This new CONFIG symbol will allow us to start
down this path.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-31 17:46:37 -04:00
Tom Rini
fcadcaa521 Convert CONFIG_MX7D to Kconfig
This converts the following to Kconfig:
   CONFIG_MX7D

Cc: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-31 17:46:37 -04:00
Tom Rini
95372165ae nxp: Migrate a number of DDR related symbols to Kconfig
- Guard most of the options in drivers/ddr/fsl/Kconfig with
  SYS_FSL_DDR || SYS_FSL_MMDC.
- Migrate FSL_DMA, DDR_ECC, DDR_ECC_CMD, and ECC_INIT_VIA_DDRCONTROLLER
  to Kconfig.
- Clean up the logic for including the DDR_ECC_CMD code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-31 17:46:37 -04:00
Tom Rini
efb5dab7ba nxp: Migrate CONFIG_DDR_CLK_FREQ to Kconfig
As this symbol can either be a fixed value or the function
get_board_ddr_clk, migration is tricky.  Introduce a choice of DYNAMIC
or STATIC_DDR_CLK_FREQ.  If DYNAMIC, we continue to use the board
defined get_board_ddr_clk function.  If STATIC, set CONFIG_DDR_CLK_FREQ
to that value and now include/clock_legacy.h contains the function
prototype or defines get_board_ddr_clk() to that static value.  Update
callers to test for DYNAMIC or STATIC.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-31 17:46:37 -04:00
Tom Rini
222d22a39a ddr: Migrate DDR_SPD to Kconfig
Move the symbol that controls building some JEDEC SPD support functions
to Kconfig.  This is required on the TI keystone 2 platforms and very
frequently (but not always) used on large number of Freescale/NXP
platforms, so use imply there.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-31 17:46:37 -04:00
Tom Rini
f66a3fde38 mvebe: Migrate CONFIG_DDR_LOG_LEVEL to Kconfig
Move this specific option to Kconfig.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-31 17:46:37 -04:00
Tom Rini
5b527c505f mvebu: Migrate CONFIG_DDR_32BIT/64BIT to Kconfig
Move CONFIG_DDR_32BIT/64BIT to Kconfig as a choice for Armada XP
platforms.  Make 64bit the default as this mirrors the current code.

Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-08-31 17:46:37 -04:00
Rasmus Villemoes
4171c57472 sandbox: add test of wdt-uclass' watchdog_reset()
Check that the watchdog_reset() implementation in wdt-uclass behaves
as expected:

- resets all activated watchdog devices
- leaves unactivated/stopped devices alone
- that the rate-limiting works, with a per-device threshold

Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2021-08-31 12:04:03 +02:00
Rasmus Villemoes
a9346b93b4 sandbox: add test of wdt_gpio driver
It seems that no other test has claimed gpio_a:7 yet, so use that.

The only small wrinkle is modifying the existing wdt test to use
uclass_get_device_by_driver() since we now have two UCLASS_WDT
instances in play, so it's a little more robust to fetch the device by
driver and not merely uclass+index.

Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2021-08-31 12:04:03 +02:00
Tom Rini
8897bf4288 global: Remove unused or unnecessary CONFIG symbols related to DDR
These symbols are now either unused or were only used within the config
file to determine other logic, which could be done in a way that doesn't
further pollute the CONFIG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30 19:49:22 -04:00
Tom Rini
809c4f242f Kconfig: Use spaces not tabs in Kconfig entires
While the Kconfig language seems to accept either form of whitespace, we
use a space throughout the project, except in these spots.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30 14:13:28 -04:00
Tom Rini
d1240b6ab2 global: Remove dead code that starts with CONFIG_[0-9A]
This removes a number of spots of dead code based on symbols that start
with CONFIG_[0-9] or CONFIG_A.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30 14:13:28 -04:00
Tom Rini
5afdcca019 arm: Migrate GICV2 / GICV3 to Kconfig
Migrate CONFIG_GICV2 and CONFIG_GICV3 to Kconfig.  We still have the GIC
related registers that need to be handled more cleanly but start by
moving this symbol to Kconfig.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30 14:13:26 -04:00
Tom Rini
6aa075432e rcar: i2c: Migrate SYS_I2C_SH to Kconfig
- Migrate SYS_I2C_SH and related defines to Kconfig
- Remove currently unused SYS_I2C_SH related defines
- Cleanup related README section.

Cc: Marek Vasut <marek.vasut+renesas@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30 14:10:07 -04:00
Tom Rini
15e7b76824 Convert CONFIG_SYS_I2C_MXC et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_I2C_MXC
   CONFIG_SYS_I2C_MXC_I2C1
   CONFIG_SYS_I2C_MXC_I2C2
   CONFIG_SYS_I2C_MXC_I2C3
   CONFIG_SYS_I2C_MXC_I2C4

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30 14:10:07 -04:00
Tom Rini
a5752f8a25 Convert CONFIG_SYS_I2C_SPEED et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_I2C_SPEED
   CONFIG_SYS_I2C_SLAVE

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30 14:10:07 -04:00
Tom Rini
14376b8e6c ti: i2c: Convert CONFIG_SYS_OMAP24_I2C to CONFIG_SYS_I2C namespace
The omap24xx I2C driver uses its own CONFIG namespace for common I2C
variables.  Rather than convert more of them to Kconfig, rename these to
the common I2C ones and remove the entirely unused functionality.  As
part of this, we make the am335x_shc platforms consistent with their
intended speed values.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30 14:10:07 -04:00
Tom Rini
52c7e37596 Convert CONFIG_SYS_I2C_EARLY_INIT to Kconfig
Convert SYS_I2C_EARLY_INIT to Kconfig, and make it depend on
SPL_SYS_I2C_LEGACY.  Remove the weak implementation as it's either
something that needs to exist for real, or shouldn't be called.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30 14:10:07 -04:00
Tom Rini
55dabcc8f2 Convert CONFIG_SYS_I2C_LEGACY to Kconfig and add CONFIG_[ST]PL_SYS_I2C_LEGACY
First, we convert CONFIG_SYS_I2C_LEGACY to Kconfig.  Next, as you cannot
have SYS_I2C_LEGACY and DM_I2C at the same time, introduce
CONFIG_SPL_SYS_I2C_LEGACY so that we can enable the legacy option only
in SPL.  Finally, for some PowerPC cases we also need
CONFIG_TPL_SYS_I2C_LEGACY support.  Convert all of the existing users to
one or more symbols.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30 14:10:07 -04:00
Tom Rini
2656145224 Convert CONFIG_SYS_I2C_MVTWSI to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_I2C_MVTWSI

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30 14:10:06 -04:00
Tom Rini
d7d40f614d Convert CONFIG_ID_EEPROM to Kconfig
This converts the following to Kconfig:
   CONFIG_ID_EEPROM

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30 14:10:05 -04:00
Tom Rini
20815ecdcf davinci: Drop CONFIG_MAC_ADDR_IN_EEPROM
Looking over the current boards, there are no users of
CONFIG_MAC_ADDR_IN_EEPROM.  Further, omapl138_lcdk uses
CONFIG_NET_RANDOM_ETHADDR.  Drop various unused code paths.

Cc: Adam Ford <aford173@gmail.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30 14:10:05 -04:00
Tom Rini
c347e42f43 powerpc: Remove unused FCC ethernet code
This code is no longer used, remove it.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30 14:10:05 -04:00
Tom Rini
b9cb74a5aa Xilinx changes for v2021.10-rc3
xilinx:
 - Disable CONFIG_ARCH_FIXUP_FDT_MEMORY
 - Print information about cpu via soc drivers and enable DISPLAY_CPUINFO
 - Wire infrastructure for DTB_RESELECT and MULTI_DTB_FIT
 
 zynq:
 - Wire single QSPI
 - Use power-source instead of io-standard properties
 - Enable nor on zc770-xm012
 
 zynqmp:
 - Change handling around multi_boot()
 - Setup offset for u-boot.itb in spi
 - Generate run time dfu_alt_info for capsule update
 - Use explicit values for enums (zynqmp_firmware.h)
 - Enable RTC/SHA1/BUTTON/BUTTON_GPIO command
 - Disable WDT driver by default
 - Bind usb/scsi via preboot because of EFI
 - DT updates/fixes
 - Add soc driver
 - Fix SPL SPI boot mode
 
 versal:
 - Add soc driver
 
 sdhci:
 - Update tap delay programming for zynq_sdhci driver
 
 cmd:
 - Fix RTC uclass handling in date command
 - Update pwm help message
 - Update reset help message
 
 watchdog:
 - Fix wwdt compilation
 
 rtc:
 - Deal with seq alias in rtc uclass
 - Add zynqmp RTC driver
 
 fdt:
 - Add kernel-doc for fdt_fixup_memory_banks()
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCYSilpgAKCRDKSWXLKUoM
 Id2JAJ9jY19JiEpOd3vuRCT5CE/pzX4yDACeP8DiXDzSi5tLHwDWUCBobUTze2s=
 =5lnj
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2021.10-rc3' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx changes for v2021.10-rc3

xilinx:
- Disable CONFIG_ARCH_FIXUP_FDT_MEMORY
- Print information about cpu via soc drivers and enable DISPLAY_CPUINFO
- Wire infrastructure for DTB_RESELECT and MULTI_DTB_FIT

zynq:
- Wire single QSPI
- Use power-source instead of io-standard properties
- Enable nor on zc770-xm012

zynqmp:
- Change handling around multi_boot()
- Setup offset for u-boot.itb in spi
- Generate run time dfu_alt_info for capsule update
- Use explicit values for enums (zynqmp_firmware.h)
- Enable RTC/SHA1/BUTTON/BUTTON_GPIO command
- Disable WDT driver by default
- Bind usb/scsi via preboot because of EFI
- DT updates/fixes
- Add soc driver
- Fix SPL SPI boot mode

versal:
- Add soc driver

sdhci:
- Update tap delay programming for zynq_sdhci driver

cmd:
- Fix RTC uclass handling in date command
- Update pwm help message
- Update reset help message

watchdog:
- Fix wwdt compilation

rtc:
- Deal with seq alias in rtc uclass
- Add zynqmp RTC driver

fdt:
- Add kernel-doc for fdt_fixup_memory_banks()
2021-08-27 08:33:02 -04:00
Michal Simek
060fa0e11b xilinx: zynqmp: Update descriptions for u-boot.its
Use TF-A instead of ATF in description. And update generic description with
removing ATF because also configurations without it are supported.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-08-26 08:14:43 +02:00
Michal Simek
52ff1626cf xilinx: common: Enabling generic function for DT reselection
U-Boot support board detection at run time and based on it change DT.
This feature is implemented for SOM Kria platforms which contain two
eeproms which contain information about SOM module and CC (Carrier card).
Full U-Boot starts with minimal DT file defined by
CONFIG_DEFAULT_DEVICE_TREE which is available in multi DTB fit image.
It is using default setup of board_name variable initializaed to
DEVICE_TREE which corresponds to CONFIG_DEFAULT_DEVICE_TREE option.

When DTB_RESELECT is enabled board_detection() is called. Keep it your mind
that this code is called before relocation. board_detection() is calling
xilinx_read_eeprom() which fills board_info (xilinx_board_description)
structure which are parsed in board_name_decode().
Based on DT configuration and amount of nvmemX aliases name of the board is
composed by concatenating CONFIG_SYS_BOARD "-" <board_name> "-rev"
<board_revision> "-" <cc_name> "-rev" <cc_revision>.

If CC is not present or more are available it keeps going.

When board name is composed and returned from board_name_decode() it is
assigned to board_name variable which is used by
board_fit_config_name_match() which is called via fdtdec_setup() when it
goes over config options in multi dtb FIT image.

From practical point of view multi DTB image is key point here which has to
contain configs for detected combinations. Unfortunately as of now they
have to be full DTBs and DTBOs are not supported.

That's why configuration like:
config_X {
	description = "zynqmp-board-cc";
	fdt = "board", "cc";
};

needs to be squashed together with:
fdtoverlay -o zynqmp-board-cc -i arch/arm/dts/zynqmp-board.dtb \
arch/arm/dts/zynqmp-cc.dtbo

and only one dtb is in fit:
config_X {
	description = "zynqmp-board-cc";
	fdt = "board-cc";
};

For creating multi DTBs fit image use mkimage -E, e.g.:
mkimage -E -f all.its all.dtb

When DTB_RESELECT is enabled xilinx_read_eeprom() is called before
relocation and it uses calloc for getting a buffer. Because this is dynamic
memory it is not relocated that's why xilinx_read_eeprom() is called again
as the part of board_init(). This second read with calloc buffer placed in
proper position board_late_init_xilinx() can setup u-boot variables as
before.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-08-26 08:14:43 +02:00
Michal Simek
e69213611e xilinx: zynqmp: Generate different u-boot.itb for MULTI_DTB_FIT
When MULTI_DTB_FIT is enabled fit-dtb.blob fit image is created which
contain all DTBs listed by CONFIG_OF_LIST. And with DTB_RELESELECT there is
a need to handle it as one file with DTBs in it not as separate DTBs in
u-boot.its/itb.
That's why extend mkimage_fit_atf.sh to generate u-boot.itb correctly.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-08-26 08:14:43 +02:00
Michal Simek
f28a22d55a arm64: dts: Make sure that all DTBs are 64bit aligned
Start of DTB should be 64bit aligned that's why also make sure that end is
also 64bit aligned. It is not required but it is nice thing to do.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-08-26 08:14:43 +02:00
T Karthik Reddy
42e20f52d9 soc: xilinx: versal: Add soc_xilinx_versal driver
soc_xilinx_versal driver allows identification of family & revision
of versal SoC. This driver is selected by CONFIG_SOC_XILINX_VERSAL.
Probe this driver using platdata U_BOOT_DEVICE structure which is
defined at mach-versal/cpu.c.
Add this config to xilinx_versal_virt_defconfig &
xilinx_versal_mini_ospi_defconfig file to select this driver.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Reviewed-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-08-26 08:08:11 +02:00
T Karthik Reddy
a890a53ad2 soc: xilinx: zynqmp: Add soc_xilinx_zynqmp driver
soc_xilinx_zynqmp driver allows identification of family & revision
of zynqmp SoC. This driver is selected by CONFIG_SOC_XILINX_ZYNQMP.
Add this config to xilinx_zynqmp_virt_defconfig file.
Probe this driver using platdata U_BOOT_DEVICE structure which is
specified in mach-zynqmp/cpu.c.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Reviewed-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-08-26 08:08:11 +02:00
Michal Simek
c2b7244322 ARM: zynq: Enable smcc and nor for zc770-xm012
Enable cfi flash on zc770-xm012 configuration.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-08-26 08:08:11 +02:00
Michal Simek
0df062bf04 ARM: zynq: Wire single qspi on couple of boards
Single configuration is working fine and no issue to enable it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-08-26 08:08:11 +02:00
Sai Krishna Potthuri
b9c4e8d439 ARM: zynq: Replace 'io-standard' with 'power-source' property
Replace 'io-standard' property with 'power-source' property in all
zynq dts files to be in sync with Zynq Pinctrl driver.

Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-08-26 08:08:11 +02:00
Raju Kumar Pothuraju
bc353102a0 xilinx: Add jedec compatible string for QSPI (Zynq/ZynqMP)
Add missing "jedec, spi-nor" compatible string for QSPI flash node.
Spi-nor framework uses this compatibility string to probe &
initialize flash. With missing compatibility string we are observing
below error:

Zynq> sf probe 0 0 0
 jedec_spi_nor spi_flash@0:0: unrecognized JEDEC id bytes:
00, 00, 00  Failed to initialize SPI flash at 0:0 (error -2)

Signed-off-by: Raju Kumar Pothuraju <raju.kumar-pothuraju@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-08-26 08:08:11 +02:00
Michal Simek
1759a31288 arm64: zynqmp: Update comment style sm-k26
Trivial style patch.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-08-26 08:08:11 +02:00
Michal Simek
464f6558ca arm64: zynqmp: Fix header alignment on kv260 boards
Fix header alignment.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-08-26 08:08:11 +02:00
Michal Simek
4cec057ff9 arm64: zynqmp: Fix node name for ds35/36 leds
By dt-binding specs led nodes should have -led suffix that's why add it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-08-26 08:08:11 +02:00
Siew Chin Lim
31b51cb1d2 arm: socfpga: Enable Intel N5X device build
Add defconfig for N5X to support legacy, ATF and VAB boot flow.

Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
2021-08-25 15:26:38 +08:00
Siew Chin Lim
8208e9a914 arm: dts: Add base dtsi and devkit dts for Intel N5X device
Add device tree for N5X.

Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Reviewed-by: Ley Foon Tan <lftan.linux@gmail.com>
2021-08-25 15:04:44 +08:00
Siew Chin Lim
00a990e9a9 arm: socfpga: Add SPL for Intel N5X device
Add SPL for N5X.

Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
2021-08-25 14:43:29 +08:00
Tien Fong Chee
59d4230429 ddr: altera: Add SDRAM driver for Intel N5X device
The DDR subsystem in Diamond Mesa is consisted of controller, PHY,
memory reset manager and memory clock manager.

Configuration settings of controller, PHY and  memory reset manager
is come from DDR handoff data in bitstream, which contain the register
base addresses and user settings from tool.

Configuration settings of memory clock manager is come from the HPS
handoff data in bitstream, however the register base address is defined
in device tree.

The calibration is fully done in HPS, which requires IMEM and DMEM
binaries loading to PHY SRAM for running this calibration, both
IMEM and DMEM binaries are also part of bitstream, this bitstream
would be loaded to OCRAM by SDM, and configured by DDR driver.

Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
2021-08-25 13:47:05 +08:00
Siew Chin Lim
37529cf285 arm: socfpga: Changed misc_s10.c to misc_soc64.c
Rename to common file name to used by all SOC64 devices.
No functionality change.

Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
2021-08-25 13:37:01 +08:00
Siew Chin Lim
c2b733c0f0 arm: socfpga: Add clock manager for Intel N5X device
Add clock manager for N5X.

Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
2021-08-25 13:32:50 +08:00
Siew Chin Lim
d6fee20d5f arm: socfpga: Move cm_get_mpu_clk_hz function declaration to clock_manager.h
Move cm_get_mpu_clk_hz function declaration from individual device's
clock manager header file to common clock_manager.h.

Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
2021-08-25 13:31:40 +08:00
Siew Chin Lim
d694c7d46b arm: socfpga: Get clock manager base address for Intel N5X device
Add N5X clock manager to socfpga_get_managers_addr function.

Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
2021-08-25 12:54:37 +08:00
Adam Ford
221146c558 ARM: rmobile: beacon-renesom: Enable QSPI NOR Flash
There is a QSPI NOR flash part on the board.  Because this chip isn't
yet supported in Linux, but it is supported in U-Boot, and the
face that the RPC_SPI compatible names are different in U-Boot and
Linux, the device tree updates are confined to -u-boot.dtsi files.

In order to use the QSPI, TF-A must leave RPC unlocked by compiling
TF-A with RZG_RPC_HYPERFLASH_LOCKED=0.

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Biju Bas <biju.das.jz@bp.renesas.com>
2021-08-24 20:03:09 +02:00
Tien Fong Chee
2fb2e04791 arm: socfpga: Add handoff data support for Intel N5X device
N5X support both HPS handoff data and DDR handoff data.
Existing HPS handoff functions are restructured to support both existing
devices and N5X device.

Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
2021-08-24 17:13:35 +08:00
Siew Chin Lim
0fbf31f966 arm: socfpga: Add base address for Intel N5X device
Reuse base_addr_soc64.h for Intel N5X device, the address is the
same as Agilex.

Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
2021-08-24 15:14:23 +08:00
Siew Chin Lim
bdba67ba87 arm: socfpga: Changed base_addr_s10.h to base_addr_soc64.h
Rename to common file name to used by all SOC64 devices and change
"_S10_" to "_SOC64_" in base_addr_soc64.h.

Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
2021-08-24 15:11:34 +08:00
Siew Chin Lim
510c277a2e arm: socfpga: Move linux_qspi_enable from bootcommand to board_prep_linux function
Move 'linux_qspi_enable' from bootcommand to board_prep_linux function when
OS booted from FIT image for Stratix 10 and Agilex. This flow is common for
all Intel SOC64 devices.

U-Boot will update 'fdt_addr' environment value based on FIT image in
board_prep_linux function, and 'linux_qspi_enable' will refer to 'fdt_addr'
environment value to retrieve the device tree node.

Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
2021-08-24 14:29:50 +08:00
Tom Rini
4865db0716 Pull request for efi-2021-10-rc3
Documentation:
 
 * Rename Freescale to NXP
 * Document structures used for the UEFI TCG2 protocol
 
 UEFI:
 
 * Device paths must use EfiBootServicesData
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEK7wKXt3/btL6/yA+hO4vgnE3U0sFAmEf+AgACgkQhO4vgnE3
 U0skxhAAjjv6yMYLYlj2YNTtYDS2zVsnsY8i/vmWNmGYvwfrlcUC/e3J00ftBIjI
 DEwImrzefvQwr4NOZgIlyxR81NwboWULxvHSF5avwctxQVoTElkSfE2Ji+nFYa23
 P/L7E/Zf+NwTHBlE1wfkNJPZ/zya73DTOe+MGWvLnvOX56JZqEJOgmTtcQntRUll
 9zkB76j6sCk8B3ydFZmzGqhB4aslJBypG+bQB72XXGVBZoHb9pEPv90hBl616AN/
 5H8WewxTE2s6z3IfexxPAc7ssMQuW3RWw0WsJvBVviw8tSPj4SZjg5HNHAM3mz/i
 EXHUqAEySP1oT6P4hVef7Xc9gC67N+dVZGAA1QcZBkAnH+BQQ2GmIWX5+3mZJflq
 3eHWhMUHWc4q76MbN9QqReAo3wJ3GsBqdA1oORR5FgIPwEVl0jwQMYv6frC/vB6/
 6VX8WcbAWsixjf8QeQlibfMqBO9xZI1Iue5rN6DcwMey6dZrDnXGMdk7Woj6F4ga
 tERYBt+UBawTf2ww24wMXc7Hw2dZ6kj44ls2doRFKqHOpaY9Mk2QPTaVPrFkj33J
 3xlH2BYdB3ALriS1jN6Qcq6xEwyaMdkj5MzVyitunaCLiAKKORwGf0chkqiRiA+k
 zEET0uDBtO7beraiUJU9jeMPcVj3mYpiFR/CZBD/HWOVB/KwhGU=
 =gMKg
 -----END PGP SIGNATURE-----

Merge tag 'efi-2021-10-rc3' of https://source.denx.de/u-boot/custodians/u-boot-efi

Pull request for efi-2021-10-rc3

Documentation:

* Rename Freescale to NXP
* Document structures used for the UEFI TCG2 protocol

UEFI:

* Device paths must use EfiBootServicesData
2021-08-23 12:44:12 -04:00
Tom Rini
18f4e85876 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq
fsl-qoriq: Fixes related to env, spi, usb, crypto, configs, distro-boot
for Layerscape Boards like lx2, sl28, ls2088ardb.
powerpc: Fixes for t208xrdb revd board and cortina related configs
update for T208xRDB, T4240RDB.
2021-08-23 09:17:32 -04:00
Nandor Han
c50b21b705 bootcount: add a new driver with syscon as backend
The driver will use a syscon regmap as backend and supports both
16 and 32 size value. The value will be stored in the CPU's endianness.

Signed-off-by: Nandor Han <nandor.han@vaisala.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-08-22 11:04:52 +02:00
Wasim Khan
b62c174e86 armv8: fsl : create bootcmd and mcinitcmd as per boot source
NXP platforms expect custom bootcmd and mcinitcmd to be
updated as per boot source with default environment.
Check env variable fsl_bootcmd_mcinitcmd_set to prepare
bootcmd and mcinitcmd

Fixes: cbf77d2018 (armv8: fsl-layerscape: Fix automatic
setting of bootmcd with TF-A)

Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-08-18 15:55:15 +05:30
Michael Walle
8331618cc3 board: sl28: drop unneeded and outdated flash partitions
This board doesn't use the MTD subsystem in u-boot, thus there is no
need to specify the partitions. They are outdated anyway. Just drop
them.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-08-18 15:55:15 +05:30
Tom Rini
a968e9adac arm: Finish migration of HAS_FSL_XHCI_USB
This symbol was largely migrated, except for one case.  Update it.

Cc: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-08-18 15:55:15 +05:30
Heinrich Schuchardt
c91737b7f1 efi_loader rename enum efi_mem_type to efi_memory_type
Use the same name as in the UEFI specification to avoid confusion.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-08-17 17:24:08 +02:00
Zong Li
662e300bc0 riscv: cpu: fu740: Fix typo of date
Fixed the typo of date of copyright declaration.

Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-08-17 19:28:37 +08:00
Alexandru Gagniuc
ee870859ce arm: stm32mp1: Implement ECDSA signature verification
The STM32MP ROM provides several service. One of them is the ability
to verify ecdsa256 signatures. Hook the ROM API into the ECDSA uclass.

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-08-16 10:49:35 +02:00
Marek Vasut
59f6eb477e ARM: dts: stm32: Reduce DHCOR SPI NOR frequency to 50 MHz
The SPI NOR is a bit further away from the SoC on DHCOR than on DHCOM,
which causes additional signal delay. At 108 MHz, this delay triggers
a sporadic issue where the first bit of RX data is not received by the
QSPI controller.

There are two options of addressing this problem, either by using the
DLYB block to compensate the extra delay, or by reducing the QSPI bus
clock frequency. The former requires calibration and that is overly
complex for SPL, so opt for the second option. This incurs 20ms delay
during boot, when SPL loads U-Boot to DRAM.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-08-16 10:49:35 +02:00
Patrick Delaunay
2d4180b1eb arm: dts: stm32mp15: alignment with v5.14
Device tree alignment with Linux kernel v5.14-rc3
- ARM: dts: stm32: move stmmac axi config in ethernet node on stm32mp15
- ARM: dts: stm32: Configure qspi's mdma transfer to block for stm32mp151
- ARM: dts: stm32: add a new DCMI pins group on stm32mp15
- ARM: dts: stm32: fix ltdc pinctrl on microdev2.0-of7

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-08-16 10:49:35 +02:00
Patrick Delaunay
92b611e8b0 stm32mp: correctly handle board_get_usable_ram_top(0)
The function board_get_usable_ram_top can be called after relocation
with total_size = 0 to get the uppermost pointer that is valid to access
in U-Boot.

When total_size = 0, the reserved memory should be not take in account
with lmb library and 'gd->ram_base + gd->ram_size' can be used.

It is the case today in lib/efi_loader/efi_memory.c:efi_add_known_memory()
and this patch avoids that the reserved memory for OP-TEE is not part of
the EFI available memory regions.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-08-16 10:49:35 +02:00
Patrick Delaunay
f64d32a27a stm32mp1: stm32prog: remove stm32prog_get_tee_partitions with FIP
The MTD tee partitions used to save the OP-TEE binary are needed when
TF-A doesn't use the FIP container to load binaries.

This patch puts under CONFIG_STM32MP15x_STM32IMAGE flag the associated
code in U-Boot binary and prepare the code cleanup when
CONFIG_STM32MP15x_STM32IMAGE support will be removed after TF-A migration
to FIP support.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-08-16 09:36:31 +02:00
Patrick Delaunay
b73e8bf453 arm: stm32mp: add defconfig for trusted boot with FIP
Add TF-A FIP support for trusted boot on STM32MP15x,
when STM32MP15x_STM32IMAGE is not activated.

With FIP support the SSBL partition is named "fip" and its size is 4MB,
so the ENV partition name in device tree  (for SD card or eMMC)
or offset in defconfig (CONFIG_ENV_OFFSET / CONFIG_ENV_OFFSET_REDUND)
need to be modified.

With FIP the TEE MTD partitions are removed because the OP-TEE binray are
included in the FIP containers.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-08-16 09:36:31 +02:00
Patrick Delaunay
f91783edf2 arm: stm32mp: handle the OP-TEE nodes in DT with FIP support
With FIP support in TF-A (when CONFIG_STM32MP15x_STM32IMAGE
is not activated), the DT nodes needed by OP-TEE are added by OP-TEE
firmware in U-Boot device tree, present in FIP.

These nodes are only required in trusted boot, when TF-A load the file
u-boot.stm32, including the U-Boot device tree with STM32IMAGE header,
in this case OP-TEE can't update the U-Boot device tree.

Moreover in trusted boot mode with FIP, as the OP-TEE nodes are present
in U-Boot device tree only when needed the function
stm32_fdt_disable_optee can be removed.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-08-16 09:34:27 +02:00
Patrick Delaunay
6de57b41dd arm: stm32mp: add config for STM32IMAGE support
By default for trusted boot with TF-A, U-Boot (u-boot-nodtb)
is located in FIP container with its device tree and with
the secure monitor (provided by TF-A or OP-TEE).
The FIP file is loaded by TF-A BL2 and each components is
extracted at the final location.

This patch add CONFIG_STM32MP15x_STM32IMAGE to request the
STM32 image generation for SOC STM32MP15x
when FIP container is not used (u-boot.stm32 is loaded by TF-A
as done previously to keep the backward compatibility).

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-08-16 09:34:27 +02:00
Heinrich Schuchardt
17a50bd689 efi_loader: add Linux magic to RISC-V crt0
Add the Linux magic to the EFI file header to allow running our test
programs with GRUB's linux command.

MajorImageVersion = 1 indicates a kernel that can consume the
EFI_LOAD_FILE2_PROTOCOL. This allows to dump the GRUB provided intird with
our initrddump.efi tool.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-08-14 20:54:41 +02:00
Tom Rini
0704305528 Merge tag 'u-boot-rockchip-20210812' of https://source.denx.de/u-boot/custodians/u-boot-rockchip
- Add Rockchip SFC driver support;
- DTS sync from kernel;
- emmc hs400 support for rk3399;
- Fix for spinore bootdevice and MMC boot order;
2021-08-12 09:33:39 -04:00
Chris Morgan
d70c0cab8f rockchip: px30: add support for SFC for Odroid Go Advance
The Odroid Go Advance uses a Rockchip Serial Flash Controller with an
XT25F128B SPI NOR flash chip. This adds support for both. Note that
while both the controller and chip support quad mode, only two lines
are connected to the chip. Changing the pinctrl to bus2 and setting tx
and rx lines to 2 for this reason.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-08-12 09:34:11 +08:00
Chris Morgan
08b097c32f rockchip: px30: add the serial flash controller
Add the serial flash controller to the devicetree for the PX30.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-08-12 09:34:11 +08:00
Chris Morgan
6633b4d837 rockchip: px30: Add support for using SFC
This patch adds support for setting the correct pin configuration
for the Rockchip Serial Flash Controller found on the PX30.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-08-12 09:34:11 +08:00
Johan Gunnarsson
475bb949ed rockchip: Fix u-boot-rockchip.bin build
Currently there are a few arm32 rockchip board configs that don't
generate u-boot-rockchip.bin when running make because CONFIG_BINMAN
is not enabled. This patch changes CONFIG_ARCH_ROCKCHIP to also select
CONFIG_BINMAN if CONFIG_SPL and !CONFIG_ARM64.

Example builds that don't generate u-boot-rockchip.bin without this
patch:

export ARCH=arm
export CROSS_COMPILE=/usr/bin/arm-linux-gnueabihf-
make kylin-rk3036_defconfig
make

export ARCH=arm
export CROSS_COMPILE=/usr/bin/arm-linux-gnueabihf-
make rock_defconfig
make

export ARCH=arm
export CROSS_COMPILE=/usr/bin/arm-linux-gnueabihf-
make tinker-rk3288_defconfig
make

Signed-off-by: Johan Gunnarsson <johan.gunnarsson@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-08-12 09:34:07 +08:00
Peter Robinson
100583473c arm: dts: sync the Rockhip 3368 SoCs from Linux
Sync the rk3368 DTs and associated bits from 5.14-rc1.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-08-12 09:33:13 +08:00
Peter Robinson
27e1b5ee9b arm: dts: sync the Rockhip 3328 SoCs from Linux
Sync the rk3328 DTs and associated bits from 5.14-rc1.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-08-12 09:33:13 +08:00
Peter Robinson
822556a934 arm: dts: sync the Rockhip 3399 SoCs from Linux
Sync the rk3399 DTs and associated bits from 5.14-rc1.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
(Remove the conflict content for vmarc-som)
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2021-08-12 09:33:13 +08:00
Tom Rini
4dc1a5c248 Merge https://source.denx.de/u-boot/custodians/u-boot-marvell
- Convert GoFlex Home Ethernet and SATA to Driver Model (Tony)
- mvebu: Automatically detect CONFIG_SYS_TCLK (Pavel)
- mvebu: sata_mv: Fix HDD identication during cold start (Tony)
- a37xx: pci: Fix handling PIO config error responses (Pavel)
- Other minor misc changes and board maintainer updates
2021-08-11 08:31:25 -04:00
Tom Rini
aba3fa1d3f - odroid-n2: fix fdtfile suffix for n2-plus
- sei610 & meson64_android cleanups to prepare android 11 boot support
 - use Android BCB mechanism for reboot reason instead of HW reboot flag
 - Switch meson64_android boot flow to use abootimg for A/B, AVB and DTBO support
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAmESPjcACgkQd9zb2sjI
 SdFabg/+K/5kH01N6etPpPgNH3DTns3Z7Uv16rawGaFJVj4V2O/Ak2vmhvjJA4df
 KvLJL3AVolMOfD4xTABRDyLKt3maCgIYkamdBWBV/xKCTKL7fvvqj8V1U5iUsGKm
 Wl2KbbDj+dGNF+IYO9V4T1D/JaRjAUk4YeztFEDaNdP3P1N+01v2FyfkadBL5un3
 dqwHb3DMNS2SyjnE3glTAs3g/+3nmrHhAHiVVZQlJHsijuup6f93e8huKQ4v1oFX
 xsNzeI9j6jGBvVI6hRsHNLOZzhj8/ZcSntdlL+b4FbY++KzrKidMgVECc486cc8t
 IEq/iJHggYhwRtw3EAYblmMVFiQeo07hgSbbSP8mIJWARtqh439tLUyKxW3y/5UT
 UlGLHcsSSwv/5NhY8ugGAYeaGGXNpMMc5ISbssnn5FB6VHSox4nRZai5U9jKoyc2
 iBNNdyLiLi/Fz9YMWj8SAibajT8bchWu1qW2n85nFb3xWQpXcbjzlglnLY6bX3TQ
 1d5ehInNK8deptHNh2eGBsPKOUJ/gDTvEey+6J517hbJ59My96v+dvmbtG7kH9Z8
 157KQzjvHH4X9MDW8wYb381TV8kcNi3b16QPP2RKxuK1Zrve0RLPhOAz/YeSkTDN
 mavHlaY7JvUXjAct0K5VXHvA9U6DBrvc3eb7KoXL4b4+SHr/4UQ=
 =RZ8+
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20210810' of https://source.denx.de/u-boot/custodians/u-boot-amlogic

- odroid-n2: fix fdtfile suffix for n2-plus
- sei610 & meson64_android cleanups to prepare android 11 boot support
- use Android BCB mechanism for reboot reason instead of HW reboot flag
- Switch meson64_android boot flow to use abootimg for A/B, AVB and DTBO support
2021-08-11 08:31:13 -04:00
Xiaobo Tian
09cf012467 arm64: rk3399: r4s: Remove undesirable MAC address fetching methods for ethernet
Remove the recommended MAC address from the network card.
NanoPi R4S has a EEPROM attached to the 2nd I2C bus (U92), which stores the MAC address.

Signed-off-by: Xiaobo Tian <peterwillcn@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-08-11 18:10:39 +08:00
Xiaobo Tian
897f30e84a arm64: rk3399: r4s: Inheritance uses the sdmmc definition in dtsi
The host-index-min property is invalid,
so it inherits from the sdmmc definition in dtsi.

Signed-off-by: Xiaobo Tian <peterwillcn@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-08-11 18:10:39 +08:00
Xiaobo Tian
2ae7dacfaf arm64: rk3399: r4s: correct the LEDS label name
Correct the LEDS label name and remove the board type prefix,
which is actually unnecessary here, removes the redefined system status LED pin.

Signed-off-by: Xiaobo Tian <peterwillcn@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-08-11 18:10:39 +08:00
Johan Jonker
d2a74ec91b ARM: dts: rockchip: update rk3188-radxarock.dts
In the Linux DT the file rk3xxx.dtsi is shared between
rk3066 and rk3188. Both rk3xxx.dtsi and rk3188.dtsi have recently
had some updates.
For a future rk3066 support in U-boot this file must also update.
Move U-boot specific things in a rk3188-radxarock-u-boot.dtsi file.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-08-11 17:54:37 +08:00
Johan Jonker
7d4b5a850e ARM: dts: rockchip: update rk3188.dtsi
In the Linux DT the file rk3xxx.dtsi is shared between
rk3066 and rk3188. Both rk3xxx.dtsi and rk3188.dtsi have recently
had some updates.
For a future rk3066 support in U-boot this file must also update.
Move U-boot specific things in a rk3188-u-boot.dtsi file.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-08-11 17:54:37 +08:00
Johan Jonker
2ee023d293 ARM: dts: rockchip: update rk3xxx.dtsi
In the Linux DT the file rk3xxx.dtsi is shared between
rk3066 and rk3188. This file has recently had some updates.
For a future rk3066 support in U-boot this file must also update.
Move U-boot specific things in a rk3xxx-u-boot.dtsi file.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-08-11 17:54:37 +08:00
Artem Lapkin
e8a663cc60 rk3399: boot_devices fix spinor node name
Problem: board_spl_was_booted_from return wrong boot_devices[3] value
/spi@ff1d0000 and same-as-spl dont work properly for SPINOR flash
because arch/arm/mach-rockchip/spl-boot-order.c spl_node_to_boot_device
need parse SPINOR flash node as UCLASS_SPI_FLASH

spl-boot-order: same-as-spl > *** BOOT_SOURCE_ID 3 (2:emmc 3:spi 5:sd ...
/spi@ff1d0000 > board_boot_order: could not map node @618 to a boot-device
/sdhci@fe330000 > /mmc@fe320000

Solution: just change it to /spi@ff1d0000/flash@0

spl-boot-order: same-as-spl > *** BOOT_SOURCE_ID 3 (2:emmc 3:spi 5:sd ...
/spi@ff1d0000/flash@0 > /sdhci@fe330000 > /mmc@fe320000

Signed-off-by: Artem Lapkin <art@khadas.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-08-11 17:54:20 +08:00
Pali Rohár
7e1c0d0dca arm: mvebu: Hang if ddr3_init() fails
If ddr3_init() fails then DDR was not initialized and we cannot load and
execute U-Boot. We cannot continue, we cannot do anything in this case, so
hang.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-08-11 08:42:26 +02:00
Pali Rohár
8ac303d49f arm: kirkwood: Do not overwrite CONFIG_SYS_TCLK
Config option CONFIG_SYS_TCLK is set by kw88f6281.h and kw88f6192.h files
to correct SOC/platform value. So do not overwrite it in board config
include files.

Kirkwood 88F6180 and 88F6192 uses 166 MHz TCLK and Kirkwood 88F6281 uses
200 MHz TCLK.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-08-11 08:42:26 +02:00
Pali Rohár
808cea90f5 arm: mvebu: axp: Set CONFIG_SYS_TCLK globally
This mvebu axp platform always uses fixed 250 MHz TCLK. So specify this
CONFIG_SYS_TCLK option in msys section of global file soc.h file instead of
manual configuration in every board file.

Now every #if-#else case of soc.h file defines CONFIG_SYS_TCLK, so remove
useless default CONFIG_SYS_TCLK value from the end of soc.h file.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-08-11 08:42:26 +02:00
Pali Rohár
7dd26bbff8 arm: mvebu: msys: Set CONFIG_SYS_TCLK globally
This mvebu msys platform always uses fixed 200 MHz TCLK. So specify this
CONFIG_SYS_TCLK option in msys section of global file soc.h file instead of
manual configuration in every board file.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-08-11 08:42:26 +02:00
Pali Rohár
2ddf554b86 arm: mvebu: a37x: Detect CONFIG_SYS_TCLK from SAR register
Bit 20 in SAR register specifies if TCLK is running at 200 MHz or 166 MHz.
Use this information instead of manual configuration in every board file.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-08-11 08:42:26 +02:00
Pali Rohár
29795302b9 arm: mvebu: a38x: Detect CONFIG_SYS_TCLK from SAR register
Bit 15 in SAR register specifies if TCLK is running at 200 MHz or 250 MHz.
Use this information instead of manual configuration in every board file.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-08-11 08:42:26 +02:00
Tom Rini
4da98ee1dd u-boot-imx-20210809
- new SOC: add support for imx8ulp
 - Toradex fixes for colibri (vf / imx6 / imx7 / imx8x)
 - convert to DM for mx28evk
 - Fixes for Gateworks ventana boards
 
 CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/8639
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCYREkvA8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76ZZSACfbb5qAnq5hQXYRhn9v0OjMahWF10An1xxwyDt
 I84Bklv/7yreWz82Gb2J
 =Qp7m
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20210809' of https://source.denx.de/u-boot/custodians/u-boot-imx

u-boot-imx-20210809

- new SOC: add support for imx8ulp
- Toradex fixes for colibri (vf / imx6 / imx7 / imx8x)
- convert to DM for mx28evk
- Fixes for Gateworks ventana boards

CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/8639
2021-08-09 09:27:26 -04:00
Peng Fan
a8f4630641 imx: cmd: use struct cmd_tbl
cmd_tbl_t is removed, need use struct cmd_tbl

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09 14:46:51 +02:00
Peng Fan
3f2b4d7220 arm: imx: add i.MX8ULP EVK support
Add i.MX8ULP EVK basic support, support SD/I2C/ENET/LPUART

Log as below: I would keep some debug info for now, and after we move
to be stable and production launch, we could drop that.

U-Boot SPL 2021.07-rc4-00164-gb800e19a6b (Jun 29 2021 - 10:23:30 +0800)
Normal Boot
upower_init: soc_id=48
upower_init: version:11.11.6
upower_init: start uPower RAM service
user_upwr_rdy_callb: soc=b
user_upwr_rdy_callb: RAM version:12.6
Turn on switches ok
Turn on memories ok
Clear DDR retention ok
Poll for freq_chg_req on SIM register and change to F1 frequency.
Poll for freq_chg_req on SIM register and change to F0 frequency.
Poll for freq_chg_req on SIM register and change to F1 frequency.
Poll for freq_chg_req on SIM register and change to F2 frequency.
Poll for freq_chg_req on SIM register and change to F1 frequency.
Poll for freq_chg_req on SIM register and change to F2 frequency.
complete
De-Skew PLL is locked and ready
WDT:   Not found!
Trying to boot from BOOTROM
image offset 0x8000, pagesize 0x200, ivt offset 0x0
Load image from 0x3a800 by ROM_API
NOTICE:  BL31: v2.4(release):imx_5.10.35_2.0.0_imx8ulp_er-10-gf37e59b94
NOTICE:  BL31: Built : 01:56:58, Jun 29 2021
NOTICE:  upower_init: start uPower RAM service
NOTICE:  user_upwr_rdy_callb: soc=b
NOTICE:  user_upwr_rdy_callb: RAM version:12.6

U-Boot 2021.07-rc4-00164-gb800e19a6b (Jun 29 2021 - 10:23:30 +0800)

CPU:   Freescale i.MX8ULP rev1.0 at 744 MHz
Reset cause: POR
Boot mode: Single boot
Model: FSL i.MX8ULP EVK
DRAM:  2 GiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 2
Loading Environment from MMC... ***
Warning - bad CRC, using default environment

In:    serial@293a0000
Out:   serial@293a0000
Err:   serial@293a0000
Net:
Warning: ethernet@29950000 (eth0) using random MAC address -
96:35:88:62:e0:44
eth0: ethernet@29950000
Hit any key to stop autoboot:  0

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09 14:46:51 +02:00
Peng Fan
6beec0e78c arm: dts: add i.MX8ULP dtsi
Add i.MX8ULP dtsi

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09 14:46:51 +02:00
Peng Fan
3e23794181 imx8ulp: add upower api support
Add upower api support, this is modified from upower firmware exported
package.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09 14:46:51 +02:00
Peng Fan
4b9423e6f2 imx8ulp: move struct mu_type to common header
Move struct mu_type to common header to make it reusable by upower and
S400

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09 14:46:51 +02:00
Ye Li
e8b68048e1 imx8ulp: Add workaround for eMMC boot
When booting from boot part1/2, the image offset should be 0, but
ROM has a bug to return 0x8000. Has to workaround the issue before
ROM fix it.

Use a ROM function to know boot from emmc boot part or user part
So we can set the image offset accordingly.

Signed-off-by: Ye Li <ye.li@nxp.com>
2021-08-09 14:46:51 +02:00
Ye Li
27b6a4504e imx8ulp: Use DGO_GP5 to get boot config
Since CMC1 MR0 only reflects high 16 bits boot cfg used for AP domian,
it does not connect to low 16 bits for RTD. So we can't get the correct
boot mode.
Change to use DGO_GP5 of SEC_SIM which is set by ROM.

Signed-off-by: Ye Li <ye.li@nxp.com>
2021-08-09 14:46:51 +02:00
Peng Fan
8a58897e0e imx8ulp: soc: correct reset cause
The CMC1 SRS reflects the current reset cause, not SSRS.

Then you could get "Reset cause: WARM-WDG" when issue reset in U-Boot.

Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09 14:46:51 +02:00
Peng Fan
fdfa214acf arm: imx8ulp: add iomuxc support
Add i.MX8ULP iomuxc support

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09 14:46:51 +02:00
Peng Fan
525a28c47f arm: imx8ulp: add dummy imx_get_mac_from_fuse
Add imx_get_mac_from_fuse for enet build pass

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09 14:46:51 +02:00
Ye Li
16243a1735 arm: imx8ulp: Allocate DCNANO and MIPI_DSI to AD domain
Configure DCNANO and MIPI_DSI to be controlled by AD for single boot

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09 14:46:51 +02:00
Ye Li
619412ab54 arm: iMX8ULP: Add boot device relevant functions
Read from ROM API to get current boot device.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09 14:46:51 +02:00
Ye Li
a7990a88b9 arm: imx8ulp: Probe the S400 MU device in arch init
Need probe the S400 MU device in arch_cpu_init_dm, so we can use
S400 API in u-boot

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09 14:46:51 +02:00
Peng Fan
3912d4b273 imx8ulp: unify rdc functions
Unify rdc function to rdc.c
Update soc.c to use new rdc function

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09 14:46:51 +02:00
Peng Fan
a443ec2355 arm: imx8ulp: release trdc and assign lpav from RTD to APD
Rlease LPAV from RTD to APD
Release gpu2D/3D to APD
Set TRDC MBC2 MEM1 for iomuxc0 access
Since upower depends AP/M33 SW to configure IOMUX for its PMIC i2c
and MODE pins. we have to open iomuxc0 access for A35 core (domain 7)
in single boot.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
2021-08-09 14:46:51 +02:00
Peng Fan
3df564993e arm: imx8ulp: add trdc release request
Add TRDC release request, then we could configure resources to be
accessible by A35 Domain.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09 14:46:51 +02:00
Peng Fan
367ff4bc84 arm: imx8ulp: add rdc support
There is xrdc inside i.MX8ULP, we need to configure permission to make
sure AP non-secure world could access the resources.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09 14:46:51 +02:00
Ye Li
ba472a209b arm: imx8ulp: release and configure XRDC at early phase
Since S400 will set the memory of SPL image to R/X. We can't write
to any data in SPL image.

1. Set the parameters save/restore only for u-boot, not for SPL. to
   avoid write data.
2. Not use MU DM driver but directly call MU API to send release XRDC
   to S400 at early phase.
3. Configure the SPL image memory of SRAM2 to writable (R/W/X)

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09 14:46:51 +02:00
Ye Li
26b53212b8 drivers: misc: s400_api: Update API for fuse read and write
Add API to support fuse read and write

Signed-off-by: Ye Li <ye.li@nxp.com>
2021-08-09 14:46:51 +02:00
Ye Li
7aeaf4d9a6 drivers: misc: imx8ulp: Update S400 API for release RDC
The RDC API is updated to add a field for XRDC or TRDC

Signed-off-by: Ye Li <ye.li@nxp.com>
2021-08-09 14:46:51 +02:00
Ye Li
6306f75d8e drivers: misc: imx8ulp: Add S400 API for image authentication
Add S400 API for image authentication

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09 14:46:51 +02:00
Ye Li
aadd6ca158 arm: imx8ulp: Update the reset vector in u-boot
Because we have set reset vector to ATF in SPL, have to set it back
to ROM for any reset in u-boot

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09 14:46:51 +02:00
Peng Fan
3a01f723ab arm: imx8ulp: disable wdog3
Disable wdog3 which is configured by ROM

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09 14:46:51 +02:00
Ye Li
610083e547 arm: imx8ulp: Enable full L2 cache in SPL
SRAM2 is half L2 cache and default to SRAM after system boot.
To enable the full l2 cache (512KB), it needs to reset A35 to make
the change happen.

So re-implement the jump entry function in SPL:
1. configure the core0 reset vector to entry (ATF)
2. enable the L2 full cache
3. reset A35
So when core0 up, it runs into ATF. And we have 512KB L2 cache working.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09 14:46:51 +02:00
Ye Li
981f040a9a arm: imx8ulp: soc: Change to use CMC1 to get bootcfg
CMC1 also has a MR register for bootcfg

Signed-off-by: Ye Li <ye.li@nxp.com>
2021-08-09 14:46:51 +02:00
Peng Fan
a84dab4f70 arm: imx8ulp: add clock support
Add i.MX8ULP clock support

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09 14:46:51 +02:00
Ye Li
0c00d03aca driver: misc: Add MU and S400 API to communicate with Sentinel
Add MU driver and S400 API. Need enable MISC driver to work

Signed-off-by: Ye Li <ye.li@nxp.com>
2021-08-09 14:46:50 +02:00
Peng Fan
3854a066f2 arm: imx: move container Kconfig under mach-imx
Since i.MX8 and i.MX8ULP reuse common container, so move the Kconfig
public to both.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09 14:46:50 +02:00
Ye Li
6f3858d732 arm: imx8ulp: add container support
i.MX8ULP support using ROM API to load container image,
it use same ROM API as i.MX8MN/MP, and use same container format
as i.MX8QM/QXP.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09 14:46:50 +02:00
Peng Fan
20ed81eaeb arm: imx: parse-container: guard included header files
Guard included sci.h with CONFIG_AHAB_BOOT to avoid build failure
for i.MX8ULP

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09 14:46:50 +02:00
Ye Li
31f0085285 arm: imx8: Move container image header file to mach-imx
Since the container is shared among i.MX platforms, move its header file
to mach-imx

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09 14:46:50 +02:00
Ye Li
7d84978c9c arm: imx8: Move container parser and image to mach-imx common folder
Since we will re-use the container parser on imx8ulp, move the codes
to mach-imx

Signed-off-by: Ye Li <ye.li@nxp.com>
2021-08-09 14:46:50 +02:00
Peng Fan
9ef89ea9b0 arm: imx: basic i.MX8ULP support
Add basic i.MX8ULP support

For the MMU part, Using a simple way the calculate the MMU size to avoid
default heavy calcaulation. And align address and size in the table
settings to 2MB or 4GB as much as possible. So we can reduce the 4K page
allocations in MMU table which will spends much time in create the
page table

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09 14:46:50 +02:00
Peng Fan
c17f5935cf imx: imx8ulp: add get reset cause
Add get reset cause function to show what triggerred reset.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09 14:46:50 +02:00
Peng Fan
77c3b9cc98 arm: imx8ulp: support print cpu info
Support print cpu info. the clock function has not been added, it will
be added in following patches.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09 14:46:50 +02:00
Peng Fan
5f17fef893 arm: imx: sys_proto: move boot mode define to common header
These defines could be reused by i.MX8ULP, so move them
to common header.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09 14:46:50 +02:00
Peng Fan
331d40d701 arm: imx: add i.MX8ULP cpu type and helper
Add i.MX8ULP cpu type and helpers.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09 14:46:50 +02:00
Peng Fan
19b990b4f7 arm: imx: add i.MX8ULP basic Kconfig option
Add i.MX8ULP related basic Kconfig option, which will be used later.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09 14:46:50 +02:00
Fabio Estevam
1d1f3c8099 mx28evk: Convert to driver model
Make the conversion to driver model as it is mandatory.

Successfully tested booting Linux from the SD card.

Dropped support for networking and splash screen as these need
to be properly converted to DM and tested.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
2021-08-09 14:46:50 +02:00
Sebastian Reichel
3bbc48e8f1 board: ge: bx50v3: Add PCIe reset to DT
Add PCIe reset gpio to the Bx50v3 devicetree and get get rid of
CONFIG_PCIE_IMX_PERST_GPIO.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-08-09 14:46:50 +02:00
Tim Harvey
a8a72c3ce9 board: gateworks: venice: add imx8mm-gw7902 support
The GW7902 is based on the i.MX 8M Mini / Nano SoC featuring:
- LPDDR4 DRAM
- eMMC FLASH
- Gateworks System Controller
- LTE CAT M1 modem
- USB 2.0 HUB
- M.2 Socket with USB2.0, PCIe, and dual-SIM
- IMX8M FEC
- PCIe based GbE
- RS232/RS485/RS422 serial transceiver
- GPS
- CAN bus
- WiFi / Bluetooth
- MIPI header (DSI/CSI/GPIO/PWM/I2S)
- PMIC

Do the following to add support for it:
- add dts
- add PMIC config

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09 14:46:50 +02:00
Tim Harvey
42bc70d14a arm: dts: imx8mm-venice-gw7901: use common u-boot dtsi
Use the common imx8mm-u-boot.dtsi

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09 14:46:50 +02:00
Tim Harvey
aea162c10e arm: dts: imx8mm-venice-gw700x: fix fifo-depth phy props
Replace the deprecated 'tx-fifo-depth' and 'rx-fifo-depth' properties
not supported by U-Boot drivers/net/phy/dp83867.c with the proper
'ti,fifo-depth' property.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09 14:46:50 +02:00
Tim Harvey
98559e02f1 arm: dts: imx8mm-venice-gw71xx: fix USB OTG VBUS
The GW71xx has a USB Type-C connector with USB 2.0 signaling. GPIO1_12
is the power-enable to the TPS25821 Source controller and power switch
responsible for monitoring the CC pins and enabling VBUS. Therefore
GPIO1_12 must always be enabled and the vbus output enable from the
IMX8MM can be ignored.

To fix USB OTG VBUS enable a pull-up on GPIO1_12 to always power the
TPS25821 and change the regulator output to GPIO1_10 which is
unconnected.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09 14:46:50 +02:00
Tim Harvey
a194e6ed45 imx: ventana: remove hard-coded USB OTG pinmux
pinmux is now done via dt. Add missing OTG_OC pinmux for boards that
use it.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09 14:46:50 +02:00
Tim Harvey
dd79c97b92 imx: ventana: fix UMS support
The Gateworks Ventana boards have always had usb0=usbh1 and usb1=usbotg
because OTG is often subloaded on these boards and a bit in the EEPROM
which flagging that OTG is subloaded is used to remove the dt node via the
alias.

U-Boot DM_USB UMS requires the usb0 alias be assigned to the usbotg
so fix the usb0 alias in order for UMS to work.

Fixes 72c46327f0: ("imx: ventana: enable dm support for USB")

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09 14:46:50 +02:00
Jan Kiszka
3823315cbe Revert "arm: bootm: Disable LMB reservation for command line and board info on arm64"
This reverts commit 2359fa7a87.

While the goal is valid and there is surely unused memory in that area,
we also have a lot of crucial things still located at the top-of-memory
while running lmb_alloc_base. Such things are the page table (tlb_addr),
relocated U-Boot and the active stack. Possibly more. So this patch was
premature, we will need relocations of those things first if we want to
use the range.

Fixes booting on the IOT2050, but likely also on other boards. It got
stuck on relocating the FDT - over the relocated U-Boot code.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2021-08-08 11:59:01 -04:00
Marek Vasut
2525fa3cb8 ARM: renesas: Turn on PIE for Gen3
Turn on PIE, so that the U-Boot binary can be started from any arbitrary
location in DRAM instead of a predefined fixed one. Note that this patch
is not setting SYS_TEXT_BASE=0x0 yet, since that triggers relocation bugs
in env code that are yet to be fixed.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Biju Das <biju.das.jz@bp.renesas.com>
Cc: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
2021-08-08 12:27:04 +02:00
Simon Glass
22137b8d73 pci: ppc: Drop ftpci100 driver
This is not used in U-Boot at present. Drop it and related config options.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-06 08:26:48 -04:00
Simon Glass
ebacc78e3e pci: arm: mvebu: Drop DM_PCI check from arch_early_init_r
We don't need this check anymore since when PCI is enabled, driver model
is always used.

Use CONFIG_PCI instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Correct macro usage)
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-06 08:20:45 -04:00
Fabio Estevam
3f24bd329b imx28-evk: Import devicetree file from Linux
Import the imx28-evk devicetree files from Linux kernel
version 5.11-rc7.

This is in preparation for converting the mx28evk_defconfig
target to driver model.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
2021-08-06 13:26:08 +02:00
Simon Glass
63814a6986 pci: imx: Drop DM_PCI check from cpu driver
We don't need this check anymore since when PCI is enabled, driver model
is always used.

Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-05 19:46:35 -04:00
Simon Glass
595232ad1f pci: powerpc: Drop old code
Drop the old pre-driver model code from these drivers.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-05 16:14:36 -04:00
Tom Rini
b91c704333 Merge https://source.denx.de/u-boot/custodians/u-boot-samsung 2021-08-03 09:07:01 -04:00
Tom Rini
3b64774323 Merge https://source.denx.de/u-boot/custodians/u-boot-x86
- Fixed broken ICH SPI driver in software sequencer mode
- Added "m25p,fast-read" to SPI flash node for x86 boards
- Drop ROM_NEEDS_BLOBS and BUILD_ROM for x86 ROM builds
- Define a default TSC timer frequency for all x86 boards
- x86 MTRR MSR programming codes bug fixes
- x86 "hob" command bug fixes
- Don't program MTRR for DRAM for FSP1
- Move INIT_PHASE_END_FIRMWARE to FSP2
- Use external graphics card by default on Intel Crown Bay
- tangier: Fix DMA controller IRQ polarity in CSRT
2021-08-02 21:35:50 -04:00
Simon Glass
0b1284eb52 global: Convert simple_strtoul() with decimal to dectoul()
It is a pain to have to specify the value 10 in each call. Add a new
dectoul() function and update the code to use it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-02 13:32:14 -04:00
Simon Glass
7e5f460ec4 global: Convert simple_strtoul() with hex to hextoul()
It is a pain to have to specify the value 16 in each call. Add a new
hextoul() function and update the code to use it.

Add a proper comment to simple_strtoul() while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-02 13:32:14 -04:00
Bin Meng
c71d5fb717 x86: queensbay: Return directly if IGD / SDVO were already disabled
Initialize 'igd' and 'sdvo' to NULL so that we just need to test
them against NULL later, to be compatible with that case that IGD
and SDVO devices were already in disabled state.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-08-03 00:03:14 +08:00
Bin Meng
33e4ab31a9 x86: fsp: Only FSP2 has INIT_PHASE_END_FIRMWARE
For FSP1, there is no such INIT_PHASE_END_FIRMWARE.

Move board_final_cleanup() to fsp2 directory.

Fixes: 7c73cea442 ("x86: Notify the FSP of the 'end firmware' event")
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested on chromebook_coral, chromebook_samus, chromebook_link, minnowmax
Tested-by: Simon Glass <sjg@chromium.org>
2021-08-03 00:01:38 +08:00
Bin Meng
02541601cb x86: fsp: Don't program MTRR for DRAM for FSP1
There are several outstanding issues as to why this does not apply
to FSP1:

* For FSP1, the system memory and reserved memory used by FSP are
  already programmed in the MTRR by FSP.
* The 'mtrr_top' mistakenly includes TSEG memory range that has the
  same RES_MEM_RESERVED resource type. Its address is programmed
  and reported by FSP to be near the top of 4 GiB space, which is
  not what we want for SDRAM.
* The call to mtrr_add_request() is not guaranteed to have its size
  to be exactly the power of 2. This causes reserved bits of the
  IA32_MTRR_PHYSMASK register to be written which generates #GP.

For FSP2, it seems this is necessary as without this, U-Boot boot
process on Chromebook Coral goes very slowly.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested on chromebook_coral, chromebook_samus, chromebook_link, minnowmax
Tested-by: Simon Glass <sjg@chromium.org>
2021-08-03 00:01:29 +08:00
Bin Meng
9a7c6fde07 x86: mtrr: Abort if requested size is not power of 2
The size parameter of mtrr_add_request() and mtrr_set_next_var()
shall be power of 2, otherwise the logic creates a mask that does
not meet the requirement of IA32_MTRR_PHYSMASK register.

Programming such a mask value to IA32_MTRR_PHYSMASK generates #GP.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested on chromebook_coral, chromebook_samus, chromebook_link, minnowmax
Tested-by: Simon Glass <sjg@chromium.org>
2021-08-02 15:11:41 +08:00
Bin Meng
3bcd6cf89e x86: mtrr: Skip MSRs that were already programmed in mtrr_commit()
At present mtrr_commit() programs the MTRR MSRs starting from
index 0, which may overwrite MSRs that were already programmed
by previous boot stage or FSP.

Switch to call mtrr_set_next_var() instead.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested on chromebook_coral, chromebook_samus, chromebook_link, minnowmax
Tested-by: Simon Glass <sjg@chromium.org>
2021-08-02 15:11:40 +08:00
Bin Meng
596bd0589a x86: mtrr: Do not clear the unused ones in mtrr_commit()
Current mtrr_commit() logic assumes that MTRR MSRs are programmed
consecutively from index 0 to its maximum number, and whenever it
detects an unused one, it clears all other MTRRs starting from that
one. However this may not always be the case.

In fact, the clear is not much helpful because these MTRRs come out
of reset as disabled already. Drop the clear codes.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested on chromebook_coral, chromebook_samus, chromebook_link, minnowmax
Tested-by: Simon Glass <sjg@chromium.org>
2021-08-02 15:11:40 +08:00
Bin Meng
c79cbb5952 x86: dts: Define a default TSC timer frequency
If for some reason, TSC timer frequency cannot be determined from
hardware, nor is it specified in the device tree, U-Boot will panic
resulting in endless reset during boot.

Let's define a default TSC timer frequency using the Kconfig value
CONFIG_X86_TSC_TIMER_FREQ (note: #include must be used instead of
/include/ otherwise the macro is not pre-processed).

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-08-02 15:11:40 +08:00
Bin Meng
5824bc6d6f x86: tsc: Rename X86_TSC_TIMER_EARLY_FREQ to X86_TSC_TIMER_FREQ
Currently there are two places to specify the x86 TSC timer frequency
with one in Kconfig used for early timer and the other one in device
tree used when the frequency cannot be determined from hardware.

This may potentially create an inconsistent config where the 2 values
do not match. Let's use the one specified in Kconfig in the device
tree as well.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-08-02 15:11:40 +08:00
Bin Meng
ffaa7abfc5 x86: kconfig: Drop ROM_NEEDS_BLOBS and BUILD_ROM
These 2 options are no longer needed as now binman is used to build
u-boot.rom.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-08-02 15:11:40 +08:00
Andy Shevchenko
46db4bbac3 x86: tangier: Fix DMA controller IRQ polarity in CSRT
IRQ polarity in CSRT has the same definition as by ACPI specification
chapter 19.6.64 "Interrupt (Interrupt Resource Descriptor Macro)", i.e.
ActiveHigh is 0, and ActiveLow is 1. On Intel Tangier the DMA controller
IRQ polarity is ActiveHigh.

Note, in DSDT (see southcluster.asl) it's described correctly.

Fixes: 5e99fde34a ("x86: tangier: Populate CSRT for shared DMA controller")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-08-02 15:11:40 +08:00
Bin Meng
bd798eed55 x86: dts: Add "m25p,fast-read" to SPI flash node
Except ICH7 SPI, all SPI flashes connected to ICH9 / Fast SPI should
have "m25p,fast-read" property present in their DT nodes.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-08-02 15:11:40 +08:00
Simon Glass
eec44c7218 dtoc: Support widening a bool value
At present if we see 'ranges' property (with no value) we assume it is a
boolean, as per the devicetree spec.

But another node may define 'ranges' with a value, forcing us to widen it
to an int array. At present this is not supported and causes an error.

Fix this and add some test cases.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Tom Rini <trini@konsulko.com>
2021-08-01 09:05:24 -06:00
Simon Glass
cb8970092f sandbox: Reduce keyed autoboot delay
The autoboot tests are a recent addition to U-Boot, providing much-needed
coverage in this area.

A side effect of the keyed autoboot test is that this feature is enabled
in sandbox always. This changes the autoboot prompt and confuses the
pytests. Some tests become slower, for example the vboot tests take about
27s now instead of 3s.

We don't actually need this feature enabled to be able to run the tests.
Add a switch to allow sandbox to turn it on and off as needed. Use this
in the one test that needs it.

Add a command-line flag in case this is desired in normal use.

Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: 25c8b9f298 ("test: add first autoboot unit tests")
Reviewed-by: Steffen Jaeckel <jaeckel-floss@eyet-services.de>
2021-08-01 09:05:24 -06:00
Tom Rini
5371593aed Merge https://source.denx.de/u-boot/custodians/u-boot-sunxi
- Move the PSCI runtime code for H3/A23/A33 into SRAM
- Pick the environment from the actual MMC boot device (SD card vs.
  eMMC)
- Plus a small improvement from Icenowy, just for good measure.
2021-07-31 20:51:24 -04:00
Icenowy Zheng
001ec430be sunxi: decide the inclusion of SCP by SCP_ADDR existence
There are more Allwinner SoCs that do not have a SCP now.

When there's no SCP_ADDR macro defined, we can assume there's no SCP
available.

Drop the scp part of FIT description when SCP_ADDR does not exist.

Signed-off-by: Icenowy Zheng <icenowy@sipeed.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-01 00:11:34 +01:00
Samuel Holland
1ebfc0c631 sunxi: A23/A33/H3: Move sun8i secure monitor to SRAM A2
So far for the H3, A23, and A33 SoCs, we use DRAM to hold the secure
monitor code (providing PSCI runtime services). And while those SoCs do
not have the secure SRAM B like older SoCs, there is enough (secure)
SRAM A2 to put the monitor code and data in there instead.

Follow the design of 64-bit SoCs and use the first part for the monitor,
and the last 16 KiB for the SCP firmware. With this change, the monitor
no longer needs to reserve a region in DRAM.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
[Andre: amend commit message, fix R40 and V3s build]
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-01 00:11:34 +01:00
Pali Rohár
2226ca1734 arm: mvebu: Load U-Boot proper binary in SPL code based on kwbimage header
Now that proper load and execution addresses are set in v1 kwbimage we
can use it for loading and booting U-Boot proper.

Use the new spl_parse_board_header() function to implement parsing the
kwbimage v1 header. Use information from this header to locate offset and
size of the U-Boot proper binary, instead of using the legacy U-Boot
header which is prepended to the U-Boot proper binary stored at fixed
offset. This has the advantage that we do not need to relay on legacy
U-Boot header anymore and therefore U-Boot proper binary can be stored at
any offset, as is the case when loading & booting U-Boot proper by
BootROM. The CONFIG_SYS_U_BOOT_OFFS option is therefore not used by SPL
code anymore.

Also allow to compile U-Boot SPL without CONFIG_SPL_SPI_FLASH_SUPPORT,
CONFIG_SPL_MMC_SUPPORT or CONFIG_SPL_SATA_SUPPORT set. In this case
BootROM is used for loading and executing U-Boot proper. This reduces the
size of U-Boot's SPL image. By default these config options are enabled
and so BootROM loading is not used. In some cases BootROM reads from SPI
NOR at lower speed than U-Boot SPL. So people can decide whether they
want to have smaller SPL binary at the cost of slower boot.

Therefore dependency on CONFIG_SPL_DM_SPI, CONFIG_SPL_SPI_FLASH_SUPPORT,
CONFIG_SPL_SPI_LOAD, CONFIG_SPL_SPI_SUPPORT, CONFIG_SPL_DM_GPIO,
CONFIG_SPL_DM_MMC, CONFIG_SPL_GPIO_SUPPORT, CONFIG_SPL_LIBDISK_SUPPORT,
CONFIG_SPL_MMC_SUPPORT, CONFIG_SPL_SATA_SUPPORT and
CONFIG_SPL_LIBDISK_SUPPORT is changed from strict to related "imply"
(which can be selectivelly turned off and causes booting via BootROM).

Options CONFIG_SYS_SPI_U_BOOT_OFFS,
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR and
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET have to to be set to
zero as they define the location where kwbimage header starts. It is the
location where BootROM expects start of the kwbimage from which it reads,
parses and executes SPL part. The same applies to option
CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR, which has to be set to one.

Update all config files to set correct values of these options and set
CONFIG_SYS_U_BOOT_OFFS to the correct value - the offset where U-Boot
proper starts.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-31 09:59:58 +02:00
Pali Rohár
abbf2179b2 arm: mvebu: Use U-Boot's SPL BootROM framework for booting from NAND/UART
Current code uses hack in board_init_f() which calls return_to_bootrom()
to skip U-Boot SPL code and return back to BootROM to load U-Boot via
UART or from NAND.

This change migrates that hack from the board_init_f() function and
changes it to return BOOT_DEVICE_BOOTROM instead of returning to BootROM
directly, so that U-Boot's SPL framework is used for returning to
BootROM.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Chris Packham <judge.packham@gmail.com>
Tested-by: Chris Packham <judge.packham@gmail.com>
2021-07-31 09:49:32 +02:00
Pali Rohár
9d0225b7fa arm: mvebu: Implement return_to_bootrom() via U-Boot's SPL framework
U-Boot's SPL framework already has an API for loading U-Boot via
BootROM.

Implement the function board_return_to_bootrom() for mvebu SPL code.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Chris Packham <judge.packham@gmail.com>
Tested-by: Chris Packham <judge.packham@gmail.com>
2021-07-31 09:49:32 +02:00
Pali Rohár
e1cd0d424c arm: mvebu: Mark return_to_bootrom() as a noreturn function
This function does not return, so add the appropriate compiler flag.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Chris Packham <judge.packham@gmail.com>
Tested-by: Chris Packham <judge.packham@gmail.com>
2021-07-31 09:49:32 +02:00
Pali Rohár
4375598c52 arm: mvebu: Fix return_to_bootrom()
Register r0 should be set to return value 0x0 - NO_ERR.

Set r0 with return value after all registers are restored from the
stack, so that the return value is always correct.

Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 944c7a3176 ("arm: mvebu: Add option to use UART xmodem protocol via kwboot")
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Chris Packham <judge.packham@gmail.com>
Tested-by: Chris Packham <judge.packham@gmail.com>
2021-07-31 09:49:32 +02:00
Mattijs Korpershoek
0e577643f5 Revert "ARM: meson: Add support for fastboot_set_reboot_flag()"
With the introduction of a generic reboot flag implemented in commit
a362ce214f ("fastboot: Implement generic fastboot_set_reboot_flag"), we
no longer need the custom PSCI implementation to handle the reboot reason.

This reverts commit 9a34dedfae.

Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-07-30 14:54:03 +02:00
Tom Rini
15f7e0dc01 Merge branch '2021-07-28-assorted-fixes'
- Assorted bugfixes
2021-07-29 12:10:55 -04:00
Tom Rini
38436abd5e Merge tag 'ti-v2021.10-rc2' of https://source.denx.de/u-boot/custodians/u-boot-ti
- Add MMC High speed modes for AM64 and J7200
- Add Sierra/Torrent SERDES driver
- Minor clean-ups for R5F boot from SPL
2021-07-29 08:20:06 -04:00
Patrice Chotard
268f6ac1f9 arm64: Update memcpy_{from, to}io() helpers
At early U-Boot stage, before relocation, MMU is not yet configured
and disabled. DDR may not be configured with the correct memory
attributes (can be configured in MT_DEVICE instead of MT_MEMORY).

In this case, usage of memcpy_{from, to}io() may leads to synchronous
abort in AARCH64 in case the normal memory address is not 64Bits aligned.

To avoid such situation, forbid usage of normal memory cast to (u64 *) in
case MMU is not enabled.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: mark.kettenis@xs4all.nl
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-07-28 19:30:22 -04:00
Patrick Delaunay
558e699d15 arm: use the correct prototype for reset_cpu function
Align reset_cpu function with the next prototypes in
sysreset.h or in cpu_func.h to solve compilation issue:

  void reset_cpu(void);

This patch solves the prototype conflict when cpu_func.h is
included.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-07-28 19:30:22 -04:00
Simon Glass
975e7cf301 i2c: Rename SPL/TPL_I2C_SUPPORT to I2C
Rename these options so that CONFIG_IS_ENABLED can be used with them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
2021-07-28 14:29:37 -04:00
Simon Glass
69d9eda4da i2c: Rename CONFIG_SYS_I2C to CONFIG_SYS_I2C_LEGACY
It is quite confusing that CONFIG_SYS_I2C selects the legacy I2C and
CONFIG_DM_I2C selects the current I2C. The deadline to migrate I2C is less
than a year away.

Also we want to have a CONFIG_I2C for U-Boot proper just like we have
CONFIG_SPL_I2C for SPL, so we can simplify the Makefile rules.

Rename this symbol so it is clear it is going away.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
2021-07-28 14:29:37 -04:00
Simon Glass
9ca00684db Rename DRIVERS_MISC_SUPPORT to DRIVERS_MISC
Rename these options so that CONFIG_IS_ENABLED can be used with them.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-28 14:29:37 -04:00
Simon Glass
83061dbd1c Rename GPIO_SUPPORT to GPIO
Rename these options so that CONFIG_IS_ENABLED can be used with them.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-28 14:29:36 -04:00
Simon Glass
333e4a621d Rename SPL_USB_HOST_SUPPORT to SPL_USB_HOST
Rename this option so that CONFIG_IS_ENABLED can be used with it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-28 14:27:54 -04:00
Simon Glass
078111b9c0 Rename SPL_WATCHDOG_SUPPORT to SPL_WATCHDOG
Rename this option so that CONFIG_IS_ENABLED can be used with it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-28 14:27:54 -04:00
Simon Glass
89ddb0bfeb Rename SPL_MUSB_NEW_SUPPORT to SPL_MUSB_NEW
Rename this option so that CONFIG_IS_ENABLED can be used with it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-28 14:27:54 -04:00
Simon Glass
f2d7a36ec2 Rename SPL_ETH_SUPPORT to SPL_ETH
Rename this option so that CONFIG_IS_ENABLED can be used with it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-28 14:27:54 -04:00
Simon Glass
933b2f09cb Rename SPL_POWER_SUPPORT to SPL_POWER
Rename this option so that CONFIG_IS_ENABLED can be used with it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-07-28 14:27:54 -04:00
Tom Rini
55efa84d0f - Add SMBIOS info for Khadas VIM boards
- Fix meson-axg-mipi PHY build
 - Fix VIM3 board phy-names property setup
 - Return correct value for non emmc boot sources on VIM3
 - add kernel compression vars
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAmD/0m0ACgkQd9zb2sjI
 SdHOuhAAzKV5VKWFjz+kxAWLhIeVqK1DixVkA8qMLNE9LYfF2ibv89yM0jaTQv84
 Zs4J9ak9xC2/LQPX7ui9CzAZ53yi7qM28aQd4MzRPBha0al8dehRZdcGNTRV/WBb
 CnbwW5inx2J1e+KSZ2PVqOnCTVX39ZMdEbZnxIJmSCcgrwj1eCPUzMv0wD0fqhyq
 piAbOpKLO6v1k/p4veTCa8gEimpp1Ni4QKqeLxkZ54hrt+uvrQbb7HxqfXuGwNG4
 IWnkfocZXN6nUbjNh7NitGgRZCMtiKJSgXrwlmluXoi0OyUNwxX7Fbn9JqsbWpMR
 lqFVJxbJ4jGozWK5wb5jcT5PArVkYgr+FN7lmqefysEltBjpv0JWqdxKH44RteyA
 wA4yPz/5Oe/iZJu9h2GzHuFHma2Dr8z43NrsIO/cTKN5uG9gzbKbp8IxV2P715OZ
 R5XPzSHLFD1Q/A855yKxvF1tlizSDdKo2pXZ2BfvLBZEljd37QmVkRSy+gPL3QhD
 bMICPJ1opuJZb9dEi0L54yk9+tm4ImWTuYRNOsFc4p9EGT4P9yydqMkpzuuHXRJb
 GcLoD+TXgoxK8PijX9QWdQPnb0FkFKShwWMXOn9zyzIDIzT4HlZN8HtyPCYmbyD1
 6uFWiQQEfvbzInPmQpgk5mZoblskMSI/pN+4KHKlH3X4yWK5YGQ=
 =zrJm
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20210727' of https://source.denx.de/u-boot/custodians/u-boot-amlogic

- Add SMBIOS info for Khadas VIM boards
- Fix meson-axg-mipi PHY build
- Fix VIM3 board phy-names property setup
- Return correct value for non emmc boot sources on VIM3
- add kernel compression vars
2021-07-27 11:42:31 -04:00
Artem Lapkin
e10481be1e ARM: dts: meson: Use devicetree for SMBIOS settings for Khadas VIM boards
Khadas vim series: Use devicetree for SMBIOS settings
Add settings and enable the default sysinfo driver so that these can come
from the device tree.

Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Artem Lapkin <art@khadas.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-07-27 10:32:59 +02:00
Alexandru Gagniuc
65b3f56d42 ARM: dts: stm32mp: Add OP-TEE reserved memory to SPL dtb
Add the "/reserved-memory/optee" node to the SPL devicetree. The
purpose is to allow configuring TZC regions when booting OP-TEE.

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-27 09:48:11 +02:00
Alexandru Gagniuc
8533263c85 stm32mp1: spl: Configure TrustZone controller for OP-TEE
OP-TEE is very particular about how the TZC should be configured.
When booting an OP-TEE payload, an incorrect TZC configuration will
result in a panic.

Most information can be derived from the SPL devicetree. The only
information we don't have is the split between TZDRAM and shared
memory. This has to be hardcoded. The rest of the configuration is
fairly easy, and only requires 3 TZC regions. Configure them.

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-07-27 09:48:11 +02:00
Alexandru Gagniuc
8d7f5edd86 arm: stm32mp: Implement support for TZC 400 controller
The purpose of this change is to allow configuring TrustZone (TZC)
memory permissions. For example, OP-TEE expects TZC regions to be
configured in a very particular way. The API presented here is
intended to allow exactly that.

UCLASS support is not implemented, because it would not be too useful.
Changing TZC permissions needs to be done with care, so as not to cut
off access to memory we are currently using. One place where we can
use this is at the end of SPL, right before jumping to OP-TEE.

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-07-27 09:48:09 +02:00
Marek Vasut
59000ebe0b ARM: dts: stm32: Fix AV96 eMMC pinmux
Commit 500327e2ea ("ARM: dts: stm32mp1: DT alignment with Linux kernel v5.8-rc1")
renamed sdmmc2_d47_pins_b phandle to sdmmc2_d47_pins_c, but without updating
the AV96 DT which uses that phandle. Linux missed similar update as well and
it was only added in commit 1ad6e36ec266 ("ARM: dts: stm32: Fix sdmmc2 pins
on AV96") .

Update the AV96 DT pinmux phandle, otherwise eMMC 8bit mode does not work
and access to eMMC takes a very long time to fall back to 4bit mode.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-07-27 09:47:40 +02:00
Patrick Delaunay
2a7034c77d stm32mp1: add pull-up for gpio button PA13 and PA14
When a push-button is released and PA13/PA14 are defined as input (high-Z)
the LED should not be active as the circuit is open but a small current
leak through PCB or push-button close the circuit and allows a small LED
bias giving erroneous level voltage.

So it is recommended to activate an internal pull-up in order to clearly
fix the voltage at PA13/PA14 when button is released and to wait
a short delay before to read the GPIO value only when the pull-up is
correctly configured.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-07-27 09:47:40 +02:00
Patrick Delaunay
8b71b20e0e arm: stm32mp1: force boot_device variable for invalid TAMP register value
When the TAMP register 20 have an invalid value (0x0 for example after
TAMPER error) the "boot_device" U-Boot env variable have no value and
no error is displayed in U-Boot log.

The STM32MP boot command bootcmd_stm32mp failed with strange trace:
  "Boot over !"

and the next command in bootcmd_stm32mp failed with few indication:
  if test ${boot_device} = serial || test ${boot_device} = usb;
	then stm32prog ${boot_device} ${boot_instance};

As it is difficult to investigate, the current patch avoids this issue:
- change the debug message to error: "unexpected boot mode" is displayed
- display trace "Boot over invalid!" in bootcmd_stm32mp
- execute "run distro_bootcmd" to try all the possible target

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-07-27 09:47:40 +02:00
Suman Anna
24f3fb6547 arm: dts: k3-j721e-r5: Remove MAIN R5FSS0 cluster from SPL
The MAIN R5FSS0 cluster and corresponding nodes are no longer required
to be enabled in R5 SPL after removing the support for booting any core
from this cluster on R5 SPL. So, remove these from the relevant dts
files.

This is essentially a revert of the additions done in commit 2984b82b3b
("arm: dts: k3-j721e-r5: Enable r5fss0 cluster in SPL").

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Link: https://lore.kernel.org/r/20210726211311.5977-5-s-anna@ti.com
2021-07-27 11:00:44 +05:30
Suman Anna
ea985f6d92 arm: mach-k3: Cleanup common start_non_linux_remote_cores()
The mach-k3 common code defined a weak start_non_linux_remote_cores()
function so that the proper implementation can be plugged in the
SoC-specific source files. This won't be needed anymore, so remove the
the common code.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Link: https://lore.kernel.org/r/20210726211311.5977-4-s-anna@ti.com
2021-07-27 11:00:44 +05:30
Suman Anna
536f633d8a arm: mach-k3: j721e: Cleanup MAIN R5 boot code from R5 SPL
The common J7 specific start_non_linux_remote_cores() override function
implements the logic to load and boot the Main R5FSS Core0 from R5 SPL.
This won't be supported any more for either J721E or J7200 after the R5
SPL rearchitecture for the System Firmware split into TI Foundation
Security (TIFS) and Device Management (DM) firmwares. So, cleanup the
corresponding code and the related SPL env variables.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Link: https://lore.kernel.org/r/20210726211311.5977-3-s-anna@ti.com
2021-07-27 11:00:44 +05:30
Suman Anna
05e858aefe arm: mach-k3: j721e: Move booting of Main R5FSS Core0 to A72 U-Boot
The Main R5FSS Core0 on J721E SoCs is originally booted from R5 SPL
itself to achieve certain product-level early-boot metrics. This is
no longer supported after the R5 SPL re-architecture (support merged
for v2021.10-rc1). Move the booting of this core altogether from R5
SPL to A72 U-Boot.

The env variables are left as is for now, and will be cleaned up
in a subsequent patch.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Link: https://lore.kernel.org/r/20210726211311.5977-2-s-anna@ti.com
2021-07-27 11:00:44 +05:30
Suman Anna
31b3d7a018 arm: dts: k3-am65: Fix up MCU R5FSS cluster mode back to Split-mode
The default U-Boot environment variables and design are all set up to
have the MCU R5FSS cluster to be in Split-mode. This is the setting
in v2021.01 U-Boot and the dt nodes are synched with the kernel binding
property names in commit 468ec2f3ef ("remoteproc: k3_r5: Sync to
upstreamed kernel DT property names") merged in v2021.04-rc2.

The mode for the cluster got switched back to LockStep mode by mistake
in commit e497876343 ("arm: dts: k3-am65: Sync Linux v5.11-rc6 dts
into U-Boot") also in v2021.04-rc2. This throws the following warning
messages when early-booting the cores using default env variables,

  k3_r5f_rproc r5f@41400000: Invalid op: Trying to start secondary core 2 in lockstep mode
  Load Remote Processor 1 with data@addr=0x82000000 65268 bytes: Failed!

Fix this by switching back the cluster to the expected Split-mode.
Make this mode change in the u-boot specific dtsi file to avoid such
sync overrides in the future until the kernel dts is also switched to
Split-mode by default.

Fixes: e497876343 ("arm: dts: k3-am65: Sync Linux v5.11-rc6 dts into U-Boot")
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Link: https://lore.kernel.org/r/20210726162213.28719-1-s-anna@ti.com
2021-07-27 11:00:10 +05:30
Aswath Govindraju
0817dd5432 arch: dts: am642-sk-u-boot: Disable main_sdhci0 DT node and define alias index 1 for main_sdhci1 node
A Wilink wireless device is connected to MMCSD0 subsystem and is not
supported in U-Boot. Therefore, disable main_sdhci0 device tree node in
U-Boot.

If main_sdhci0 device tree node is disabled then the the index of
main_sdhci1 node becomes 0 which leads to break in boot flow. Therefore,
add an alias to fix the index to 1.

Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Link: https://lore.kernel.org/r/20210726152807.22991-3-a-govindraju@ti.com
2021-07-27 10:58:49 +05:30
Aswath Govindraju
2140d6b0ff arch: arm: mach-k3: am642_init: Correct the function name spl_boot_mode() to spl_mmc_boot_mode()
Function spl_boot_mode() is called in common/spl/spl_mmc.c, to find the
boot mode for a given boot device. This function was renamed to
spl_mmc_boot_mode() by commit e97590654a.

Therefore, rename spl_boot_mode to spl_mmc_boot_mode.

Fixes: 57dba04afb ("arm: mach-k3: am642: Add support for boot device detection")
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Link: https://lore.kernel.org/r/20210726152807.22991-2-a-govindraju@ti.com
2021-07-27 10:58:49 +05:30
Aswath Govindraju
08189ffd15 arm: dts: k3-j7200-common-proc-board-u-boot: Add u-boot tags for torrent serdes
Add u-boot tags for torrent serdes. This has properties specific to
u-boot on top of DT in v5.13 Linux Kernel.

Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Link: https://lore.kernel.org/r/20210721155849.20994-15-kishon@ti.com
2021-07-27 10:57:12 +05:30
Aswath Govindraju
cbea79867e arm: dts: k3-j7200-common-proc-board: Enable SERDES DT
Add default lane function for torrent serdes. This is in sync
with v5.13 Linux Kernel.

Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Link: https://lore.kernel.org/r/20210721155849.20994-14-kishon@ti.com
2021-07-27 10:57:12 +05:30
Aswath Govindraju
6c4be8eb7e arm: dts: k3-j7200-main: Add DT node for torrent serdes
Add DT node for torrent serdes. This is in sync with v5.13 Linux Kernel.

Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Link: https://lore.kernel.org/r/20210721155849.20994-13-kishon@ti.com
2021-07-27 10:57:12 +05:30
Kishon Vijay Abraham I
ad256cc894 ARM: dts: k3-j721e: Add support for USB3 in USB0 instance
Configure the parent clock of wiz3_pll0_refclk to the internal clock
required for USB3 to be functional and also remove "ti,usb2-only"
property as it now supports USB3 mode. This has properties specific to
u-boot on top of DT present in v5.13 of Linux Kernel.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Link: https://lore.kernel.org/r/20210721155849.20994-12-kishon@ti.com
2021-07-27 10:57:12 +05:30
Paul Barker
124b3030f5 arm: dts: Import am335x-sancloud-bbe devicetree
This device tree is imported from Linux 5.13.1 and enabled via the
am335x board file and the am335x evm defconfig.

Signed-off-by: Paul Barker <paul.barker@sancloud.com>
2021-07-27 10:56:09 +05:30
Paul Barker
942853dd96 arm: dts: Resync BeagleBone device trees
These device trees are updated to match the versions in Linux 5.13.1.
The tick-timer entry in am335x-bone-common.dtsi is preserved.

Signed-off-by: Paul Barker <paul.barker@sancloud.com>
2021-07-27 10:56:09 +05:30
Aswath Govindraju
455f9dddc8 arm: dts: k3-j7200-main: Add support for HS400 and update delay select values for MMCSD subsystems
HS400 speed mode is now supported in J7200 SoC[1]. Therefore add
mmc-hs400-1_8v tag in sdhci0 device tree node.

Also update the delay values for various speed modes supported, based on
the revised january 2021 J7200 datasheet[2].

[1] - section 12.3.6.1.1 MMCSD Features, in
      https://www.ti.com/lit/ug/spruiu1a/spruiu1a.pdf,
      (SPRUIU1A – JULY 2020 – REVISED JANUARY 2021)

[2] - https://www.ti.com/lit/ds/symlink/dra821u.pdf,
      (SPRSP57B – APRIL 2020 – REVISED JANUARY 2021)

Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Link: https://lore.kernel.org/r/20210525093826.10390-3-a-govindraju@ti.com
2021-07-27 10:56:09 +05:30
Simon Glass
5e19f4aa13 samsung: exynos: Convert SROMC interface to a driver
Add a bus driver for this and use it to configure the bus parameters for
the Ethernet interface. Drop the old pre-driver-model code.

Switch over to use driver model for Ethernet.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2021-07-27 10:34:27 +09:00
Manish Narani
15ca9ebb07 arm64: zynqmp: Move USB3 PHY properties from DWC3 node to USB node
Move the PHY properties from DWC3 node to USB node in ZynqMP DTs as here
the USB3 PHY used is PSGTR, which is connected to Xilinx USB core. This
PHY initialization should be handled from Xilinx USB core as the
prerequisite register configurations are done here only.

Signed-off-by: Manish Narani <manish.narani@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-07-26 09:26:41 +02:00
Piyush Mehta
d036f4f2c6 arm64: dts: zynqmp: Enable USB2.0 for zc1751-xm016-dc2
The board zynqmp-zc1751-xm016-dc2 support only USB2.0.
This patch removes USB3.0 DT configuration for DC2 board.

Signed-off-by: Piyush Mehta <piyush.mehta@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-07-26 09:18:45 +02:00
Tom Rini
ec22c365e3 Pull request for efi-2021-10-rc1-3
Documentation:
 	provide Makefile documentation
 
 SMBIOS:
 	generate BIOS release date based on UEFI version
 	improve error handling in SMBIOS table generation
 
 UEFI:
 	correct handling of signed capsule if authentication if off
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAmD75MQACgkQxIHbvCwF
 GsRJSA//dN89UMt95N22v5LbmvjfBJUlLcq+FBBeHV6RxwEKwke11CSnXbrG/xq0
 +aGw/ZuONel63undx/3MWKQLjzd6WApjRWkTzkVryzyHYULiqn2JMtVy9whuoxjm
 IIGWdudnY+72IOI6jQr6Bg+979YuPjMYFDyVQCeXrgaDrCssGv1/2Vy9wB29Y0gm
 o5JDKQ1RfCU9CnsO8nYaa/sWek8KXMw/2q5My/cyV+pYDqEtTiwVLJHhp7t9pXYX
 fAhia8Kw/RqzWOcpeI0KE97r86tcoj0cBI6HxRFkfEyFkChwfwO7KuiP2uE/jZwK
 405ZntNIZBSqFMGidFu+DyuQCM5IRrok2NStAp/GBPpbd+TlRI6Kq3B/6b5dOn8D
 csMGo1XCJKcc90sie53f9t6blhJdDWXpt5Mz4g2cPBAoKSpITKf477iQG23R3VMF
 dorjcAZhXUkpA6gPhvjeNgd/NXBd6G8vJ4g4HKhJRghMRKPMfmD1/33p4Q8BcjBX
 NAgCZUkp3JfkB+FW8CZ/I0JgTVg5T9dO40xe8pMwWC1EmK9xC0+4S6FVf7gj8vSv
 MdFLuOQs94poiAc7UKoJ4+CCb9GZ6SGk3t2eJmQ00sTHjuG2JQTwa3msarh3skAB
 j0m9XAX+k9Ezr0rvBF4gIxPOCyEH0gSiDH9VOPwNDpn9LZSRUGM=
 =n6EU
 -----END PGP SIGNATURE-----

Merge tag 'efi-2021-10-rc1-3' of https://source.denx.de/u-boot/custodians/u-boot-efi

Pull request for efi-2021-10-rc1-3

Documentation:
	provide Makefile documentation

SMBIOS:
	generate BIOS release date based on UEFI version
	improve error handling in SMBIOS table generation

UEFI:
	correct handling of signed capsule if authentication if off
2021-07-24 16:41:25 -04:00
Heinrich Schuchardt
c193d9bd28 smbios: error handling for invalid addresses
SMBIOS tables only support 32bit addresses. If we don't have memory here
handle the error gracefully:

* on x86_64 fail to start U-Boot
* during UEFI booting ignore the missing table

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-24 10:49:51 +02:00
Peter Hoyes
c48fec6e7c armv8: Initialize CNTFRQ if at highest exception level
CNTFRQ_EL0 is only writable from the highest supported exception
level on the platform. For Armv8-A, this is typically EL3, but
technically EL2 and EL3 are optional so it may need to be
initialized at EL2 or EL1. For Armv8-R, the highest exception
level is always EL2.

This patch moves the initialization outside of the switch_el
block and uses a new macro branch_if_not_highest_el which
dynamically detects whether it is at the highest supported
exception level.

Linux's docs state that CNTFRQ_EL0 should be initialized by the
bootloader. If not set, the the U-Boot prompt countdown hangs.

Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
2021-07-23 18:53:46 -04:00
Stephan Gerhold
0204d1b56b board: dragonboard410c: Load U-Boot directly without LK
At the moment the U-Boot port for the DragonBoard 410c is designed
to be loaded as an Android boot image after Qualcomm's Little Kernel (LK)
bootloader. This is simple to set up but LK is redundant in this case,
since everything done by LK can be also done directly by U-Boot.

Dropping LK entirely has at least the following advantages:
  - Easier installation/board code (no need for Android boot images)
  - (Slightly) faster boot
  - Boot directly in 64-bit without a round trip to 32-bit for LK

So far this was not possible yet because of unsolved problems:

  1. Signing tool: The firmware expects a "signed" ELF image with extra
     (Qualcomm-specific) ELF headers, usually used for secure boot.
     The DragonBoard 410c does not have secure boot by default but the
     extra ELF headers are still required.

  2. PSCI bug: There seems to be a bug in the PSCI implementation
     (part of the TrustZone/tz firmware) that causes all other CPU cores
     to be started in 32-bit mode if LK is missing in the boot chain.
     This causes Linux to hang early during boot.

There is a solution for both problems now:

  1. qtestsign (https://github.com/msm8916-mainline/qtestsign)
     can be used as a "signing" tool for U-Boot and other firmware.

  2. A workaround for the "PSCI bug" is to execute the TZ syscall when
     entering U-Boot. That way PSCI is made aware of the 64-bit switch
     and starts all other CPU cores in 64-bit mode as well.

Simplify the dragonboard410c board by removing all the extra code that
is only used to build an Android boot image that can be loaded by LK.
This allows dropping the custom linker script, special image magic,
as well as most of the special build/installation instructions.

CONFIG_REMAKE_ELF is used to build a new ELF image that has both U-Boot
and the appended DTB combined. The resulting u-boot.elf can then be
passed to the "signing" tool (e.g. qtestsign).

The PSCI workaround is placed in the "boot0" hook that is enabled
with CONFIG_ENABLE_ARM_SOC_BOOT0_HOOK. The extra check for EL1 allows
compatibility with custom firmware that enters U-Boot in EL2 or EL3,
e.g. qhypstub (https://github.com/msm8916-mainline/qhypstub).

As a first step these changes apply only to DragonBoard410c.
Similar changes could likely also work for the DragonBoard 820c.

Note that removing LK wouldn't be possible that easily without a lot of
work already done three years ago by Ramon Fried. A lot of missing
initialization, pinctrl etc was already added back then even though
it was not strictly needed yet.

Cc: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
2021-07-23 18:53:45 -04:00
Masami Hiramatsu
11cd1d6a34 dts: synquacer: Add partition information to the spi-nor
Add partition information to the spi-nor flash.
This is required for accessing NOR flash via mtdparts.

Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
2021-07-23 18:53:45 -04:00
Nandor Han
c74675bd90 reboot-mode: read the boot mode from RTC memory
RTC devices could provide battery-backed memory that can be used for
storing the reboot mode magic value.

Add a new reboot-mode back-end that uses RTC to store the reboot-mode
magic value. The driver also supports both endianness modes.

Signed-off-by: Nandor Han <nandor.han@vaisala.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-23 10:16:39 -04:00
Nandor Han
f9db2f16cb reboot-mode: read the boot mode from GPIOs status
A use case for controlling the boot mode is when the user wants
to control the device boot by pushing a button without needing to
go in user-space.

Add a new backed for reboot mode where GPIOs are used to control the
reboot-mode. The driver is able to scan a predefined list of GPIOs
and return the magic value. Having the modes associated with
the magic value generated based on the GPIO values, allows the
reboot mode uclass to select the proper mode.

Signed-off-by: Nandor Han <nandor.han@vaisala.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-23 10:16:39 -04:00
Tom Rini
a15fa1ba67 dtoc improvements to show better warnings
minor test build fixes
 sandbox fixes for SDL2 and running TPL
 bloblist resize feature
 binman multithreading
 -----BEGIN PGP SIGNATURE-----
 
 iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAmD41JkRHHNqZ0BjaHJv
 bWl1bS5vcmcACgkQfxc6PpAIrea8+wgArpcRqyC2nCYtdDl1q/8mWQabct2rUJVt
 rzIYzgyPgkRBLQjlE8xgEchzAPOuw0YzQnEz3T80wepBPIy53+QYXaqumd9iuhtm
 B1x4r/GumqS4qgn9Pfqxabw2eP8DNbxClc14ExDx3zR1pUwp0DRvnYQV/w+W2RQp
 nWFKDdhdnkxuXApiVc01RF/9I+IygstVl1TUklxlw9EGkdpirczIX5cP2lhW9rsV
 Cm4fPz4V6AphiUQ4RpllossBNVHHlbVyKOtdGWe4CrERH8Zv8tIVRVeHCr0GydPr
 ORhIZTk7hmwTav3Zi4XAQ434UZcRVrJFRkZvv8TpmMhMTVb8+gyZaQ==
 =F/gP
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-21jul21' of https://gitlab.denx.de/u-boot/custodians/u-boot-dm

dtoc improvements to show better warnings
minor test build fixes
sandbox fixes for SDL2 and running TPL
bloblist resize feature
binman multithreading
2021-07-22 11:15:52 -04:00
Tom Rini
806734f41b Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq
fsl-qoriq: Update mc firmware size, address in LS1088A, LS2088A, LX2
Updates on ls1043aqds, ls1043ardb
Refactor I2C MUX Code on fsl-qoriq platforms.
2021-07-22 08:45:32 -04:00
Heinrich Schuchardt
fd25ca3275 sandbox: don't set SA_NODEFER in signal handler
The sandbox can handle signals. Due to a damaged global data pointer
additional exceptions in the signal handler may occur leading to an endless
loop. In this case leave the handling of the secondary exception to the
operating system.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-21 10:27:35 -06:00
Simon Glass
6b165ab2b7 sandbox: mmc: Support fixed MMC devices
Add support for reading devicetree flags for MMC devices. With this we
can distinguish between fixed and removable drives. Note that this
information is only available when the device is probed, not when it is
bound, since it is read in the of_to_plat() method. This could be changed
if needed later.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-07-21 10:27:35 -06:00