serial: Rename SERIAL_SUPPORT to SERIAL

Rename these options so that CONFIG_IS_ENABLED can be used with them.

Signed-off-by: Simon Glass <sjg@chromium.org>
This commit is contained in:
Simon Glass 2021-08-08 12:20:12 -06:00 committed by Tom Rini
parent 73c6ff6aac
commit 2a73606668
313 changed files with 353 additions and 353 deletions

View file

@ -120,7 +120,7 @@ config RISCV
imply SPL_OF_CONTROL
imply SPL_LIBCOMMON_SUPPORT
imply SPL_LIBGENERIC_SUPPORT
imply SPL_SERIAL_SUPPORT
imply SPL_SERIAL
imply SPL_TIMER
config SANDBOX
@ -259,7 +259,7 @@ config X86
imply SPL_PINCTRL
imply SPL_LIBCOMMON_SUPPORT
imply SPL_LIBGENERIC_SUPPORT
imply SPL_SERIAL_SUPPORT
imply SPL_SERIAL
imply SPL_SPI_FLASH_SUPPORT
imply SPL_SPI_SUPPORT
imply SPL_OF_CONTROL
@ -273,7 +273,7 @@ config X86
imply TPL_PINCTRL
imply TPL_LIBCOMMON_SUPPORT
imply TPL_LIBGENERIC_SUPPORT
imply TPL_SERIAL_SUPPORT
imply TPL_SERIAL
imply TPL_OF_CONTROL
imply TPL_TIMER
imply TPL_REGMAP

View file

@ -966,7 +966,7 @@ config ARCH_SOCFPGA
select SPL_NAND_SUPPORT if SPL_NAND_DENALI
select SPL_OF_CONTROL
select SPL_SEPARATE_BSS if TARGET_SOCFPGA_SOC64
select SPL_SERIAL_SUPPORT
select SPL_SERIAL
select SPL_SYSRESET
select SPL_WATCHDOG
select SUPPORT_SPL
@ -1038,7 +1038,7 @@ config ARCH_SUNXI
imply SPL_LIBGENERIC_SUPPORT
imply SPL_MMC if MMC
imply SPL_POWER
imply SPL_SERIAL_SUPPORT
imply SPL_SERIAL
imply USB_GADGET
config ARCH_U8500

View file

@ -23,7 +23,7 @@
DECLARE_GLOBAL_DATA_PTR;
static gd_t gdata __section(".data");
#ifdef CONFIG_SPL_SERIAL_SUPPORT
#ifdef CONFIG_SPL_SERIAL
static struct bd_info bdata __section(".data");
#endif
@ -108,7 +108,7 @@ static void mxs_spl_fixup_vectors(void)
static void mxs_spl_console_init(void)
{
#ifdef CONFIG_SPL_SERIAL_SUPPORT
#ifdef CONFIG_SPL_SERIAL
gd->bd = &bdata;
gd->baudrate = CONFIG_BAUDRATE;
serial_init();

View file

@ -136,7 +136,7 @@ void board_init_f(ulong dummy)
at91_periph_clk_enable(ATMEL_ID_PIOC);
#endif
#if defined(CONFIG_SPL_SERIAL_SUPPORT)
#if defined(CONFIG_SPL_SERIAL)
/* init console */
at91_seriald_hw_init();
preloader_console_init();

View file

@ -218,7 +218,7 @@ int do_lowlevel_init(void)
if (actions & DO_CLOCKS) {
system_clock_init();
#ifdef CONFIG_DEBUG_UART
#if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_SERIAL_SUPPORT)) || \
#if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_SERIAL)) || \
!defined(CONFIG_SPL_BUILD)
exynos_pinmux_config(PERIPH_ID_UART3, PINMUX_FLAG_NONE);
debug_uart_init();

View file

@ -309,7 +309,7 @@ config TARGET_MX6DL_MAMOJ
select SPL_OF_LIBFDT if SPL
select SPL_PINCTRL if SPL
select SPL_SEPARATE_BSS if SPL
select SPL_SERIAL_SUPPORT if SPL
select SPL_SERIAL if SPL
select SPL_USB_GADGET if SPL
select SPL_USB_HOST if SPL
select SPL_USB_SDP_SUPPORT if SPL

View file

@ -24,7 +24,7 @@ config OMAP34XX
imply SPL_NAND_SUPPORT
imply SPL_OMAP3_ID_NAND
imply SPL_POWER
imply SPL_SERIAL_SUPPORT
imply SPL_SERIAL
imply SYS_I2C_OMAP24XX
imply SYS_THUMB_BUILD
imply TWL4030_POWER
@ -46,7 +46,7 @@ config OMAP44XX
imply SPL_NAND_SIMPLE
imply SPL_NAND_SUPPORT
imply SPL_POWER
imply SPL_SERIAL_SUPPORT
imply SPL_SERIAL
imply SYS_I2C_OMAP24XX
imply SYS_THUMB_BUILD
@ -71,7 +71,7 @@ config OMAP54XX
imply SPL_NAND_AM33XX_BCH
imply SPL_NAND_SUPPORT
imply SPL_POWER
imply SPL_SERIAL_SUPPORT
imply SPL_SERIAL
imply SYS_I2C_OMAP24XX
config TI814X

View file

@ -51,7 +51,7 @@ config TARGET_AM335X_EVM
imply SPL_OF_LIBFDT
imply SPL_POWER
imply SPL_SEPARATE_BSS
imply SPL_SERIAL_SUPPORT
imply SPL_SERIAL
imply SPL_SYS_MALLOC_SIMPLE
imply SPL_WATCHDOG
imply SPL_YMODEM_SUPPORT
@ -233,7 +233,7 @@ config TARGET_AM43XX_EVM
imply SPL_MMC
imply SPL_NAND_SUPPORT
imply SPL_POWER
imply SPL_SERIAL_SUPPORT
imply SPL_SERIAL
imply SPL_WATCHDOG
imply SPL_YMODEM_SUPPORT
help

View file

@ -29,7 +29,7 @@ config RCAR_GEN3
imply SPL_GZIP
imply SPL_LIBCOMMON_SUPPORT
imply SPL_LIBGENERIC_SUPPORT
imply SPL_SERIAL_SUPPORT
imply SPL_SERIAL
imply SPL_SYS_MALLOC_SIMPLE
imply SPL_TINY_MEMSET
imply SPL_YMODEM_SUPPORT

View file

@ -11,8 +11,8 @@ config ROCKCHIP_PX30
select TPL_NEEDS_SEPARATE_TEXT_BASE if SPL
select TPL_NEEDS_SEPARATE_STACK if TPL
imply SPL_SEPARATE_BSS
select SPL_SERIAL_SUPPORT
select TPL_SERIAL_SUPPORT
select SPL_SERIAL
select TPL_SERIAL
select DEBUG_UART_BOARD_INIT
imply ROCKCHIP_COMMON_BOARD
imply SPL_ROCKCHIP_COMMON_BOARD
@ -84,9 +84,9 @@ config ROCKCHIP_RK322X
select TPL_NEEDS_SEPARATE_STACK if TPL
select SPL_DRIVERS_MISC
imply ROCKCHIP_COMMON_BOARD
imply SPL_SERIAL_SUPPORT
imply SPL_SERIAL
imply SPL_ROCKCHIP_COMMON_BOARD
imply TPL_SERIAL_SUPPORT
imply TPL_SERIAL
imply TPL_ROCKCHIP_COMMON_BOARD
select TPL_LIBCOMMON_SUPPORT
select TPL_LIBGENERIC_SUPPORT
@ -119,7 +119,7 @@ config ROCKCHIP_RK3288
imply TPL_RAM
imply TPL_REGMAP
imply TPL_ROCKCHIP_COMMON_BOARD
imply TPL_SERIAL_SUPPORT
imply TPL_SERIAL
imply TPL_SYSCON
imply USB_FUNCTION_ROCKUSB
imply CMD_ROCKUSB
@ -146,8 +146,8 @@ config ROCKCHIP_RK3308
imply SPL_REGMAP
imply SPL_SYSCON
imply SPL_RAM
imply SPL_SERIAL_SUPPORT
imply TPL_SERIAL_SUPPORT
imply SPL_SERIAL
imply TPL_SERIAL
imply SPL_SEPARATE_BSS
help
The Rockchip RK3308 is a ARM-based Soc which embedded with quad
@ -165,8 +165,8 @@ config ROCKCHIP_RK3328
imply ROCKCHIP_COMMON_BOARD
imply ROCKCHIP_SDRAM_COMMON
imply SPL_ROCKCHIP_COMMON_BOARD
imply SPL_SERIAL_SUPPORT
imply TPL_SERIAL_SUPPORT
imply SPL_SERIAL
imply TPL_SERIAL
imply SPL_SEPARATE_BSS
select ENABLE_ARM_SOC_BOOT0_HOOK
select DEBUG_UART_BOARD_INIT
@ -188,8 +188,8 @@ config ROCKCHIP_RK3368
imply ROCKCHIP_COMMON_BOARD
imply SPL_ROCKCHIP_COMMON_BOARD
imply SPL_SEPARATE_BSS
imply SPL_SERIAL_SUPPORT
imply TPL_SERIAL_SUPPORT
imply SPL_SERIAL
imply TPL_SERIAL
imply TPL_ROCKCHIP_COMMON_BOARD
help
The Rockchip RK3368 is a ARM-based SoC with a octa-core (organised
@ -219,7 +219,7 @@ config ROCKCHIP_RK3399
select TPL_NEEDS_SEPARATE_TEXT_BASE if TPL
select TPL_NEEDS_SEPARATE_STACK if TPL
select SPL_SEPARATE_BSS
select SPL_SERIAL_SUPPORT
select SPL_SERIAL
select SPL_DRIVERS_MISC
select CLK
select FIT
@ -235,7 +235,7 @@ config ROCKCHIP_RK3399
imply ROCKCHIP_SDRAM_COMMON
imply SPL_ATF_NO_PLATFORM_PARAM if SPL_ATF
imply SPL_ROCKCHIP_COMMON_BOARD
imply TPL_SERIAL_SUPPORT
imply TPL_SERIAL
imply TPL_LIBCOMMON_SUPPORT
imply TPL_LIBGENERIC_SUPPORT
imply TPL_SYS_MALLOC_SIMPLE

View file

@ -36,7 +36,7 @@ config SYS_SOC
config SYS_MALLOC_F_LEN
default 0x400
config SPL_SERIAL_SUPPORT
config SPL_SERIAL
default y
config TPL_LDSCRIPT

View file

@ -22,7 +22,7 @@ config SYS_SOC
config SYS_MALLOC_F_LEN
default 0x400
config SPL_SERIAL_SUPPORT
config SPL_SERIAL
default y
source "board/rockchip/evb_rk3036/Kconfig"

View file

@ -24,7 +24,7 @@ config SPL_LIBCOMMON_SUPPORT
config SPL_LIBGENERIC_SUPPORT
default y
config SPL_SERIAL_SUPPORT
config SPL_SERIAL
default y
config TPL_LIBCOMMON_SUPPORT

View file

@ -20,7 +20,7 @@ config SPL_LIBCOMMON_SUPPORT
config SPL_LIBGENERIC_SUPPORT
default y
config SPL_SERIAL_SUPPORT
config SPL_SERIAL
default y
config TPL_MAX_SIZE

View file

@ -163,7 +163,7 @@ config SPL_LIBCOMMON_SUPPORT
config SPL_LIBGENERIC_SUPPORT
default y
config SPL_SERIAL_SUPPORT
config SPL_SERIAL
default y
config TPL_LDSCRIPT

View file

@ -14,7 +14,7 @@ config SYS_SOC
config SYS_MALLOC_F_LEN
default 0x400
config SPL_SERIAL_SUPPORT
config SPL_SERIAL
default y
config ROCKCHIP_BOOT_MODE_REG

View file

@ -48,7 +48,7 @@ void board_init_f(ulong dummy)
struct udevice *dev;
int ret;
#if defined(CONFIG_DEBUG_UART) && defined(CONFIG_TPL_SERIAL_SUPPORT)
#if defined(CONFIG_DEBUG_UART) && defined(CONFIG_TPL_SERIAL)
/*
* Debug UART can be used from here if required:
*

View file

@ -41,7 +41,7 @@ config STM32F7
select SPL_OF_TRANSLATE
select SPL_PINCTRL
select SPL_RAM
select SPL_SERIAL_SUPPORT
select SPL_SERIAL
select SPL_SYS_MALLOC_SIMPLE
select SPL_TIMER
select SPL_XIP_SUPPORT

View file

@ -15,7 +15,7 @@ config SPL
select SPL_PINCTRL
select SPL_REGMAP
select SPL_DM_RESET
select SPL_SERIAL_SUPPORT
select SPL_SERIAL
select SPL_SYSCON
select SPL_WATCHDOG if WATCHDOG
imply BOOTSTAGE_STASH if SPL_BOOTSTAGE

View file

@ -9,7 +9,7 @@ config SPL_LIBCOMMON_SUPPORT
config SPL_LIBGENERIC_SUPPORT
default y
config SPL_SERIAL_SUPPORT
config SPL_SERIAL
default y
config TEGRA_CLKRST

View file

@ -18,7 +18,7 @@ config SPL_LIBGENERIC_SUPPORT
config SPL_MMC
default y if MMC_SDHCI_ZYNQ
config SPL_SERIAL_SUPPORT
config SPL_SERIAL
default y
config SPL_SPI_FLASH_SUPPORT

View file

@ -15,7 +15,7 @@ config SPL_LIBGENERIC_SUPPORT
config SPL_MMC
default y if MMC_SDHCI_ZYNQ
config SPL_SERIAL_SUPPORT
config SPL_SERIAL
default y
config SPL_SPI_FLASH_SUPPORT

View file

@ -68,7 +68,7 @@ config SOC_MT7628
select SPL_OF_CONTROL if SPL_DM
select SPL_SIMPLE_BUS if SPL_DM
select SPL_DM_SERIAL if SPL_DM
select SPL_CLK if SPL_DM && SPL_SERIAL_SUPPORT
select SPL_CLK if SPL_DM && SPL_SERIAL
select SPL_SYSRESET if SPL_DM
select SPL_OF_LIBFDT if SPL_OF_CONTROL
help

View file

@ -23,7 +23,7 @@ void board_debug_uart_init(void)
void mtmips_spl_serial_init(void)
{
#ifdef CONFIG_SPL_SERIAL_SUPPORT
#ifdef CONFIG_SPL_SERIAL
void __iomem *base = ioremap_nocache(SYSCTL_BASE, SYSCTL_SIZE);
#if CONFIG_CONS_INDEX == 1
@ -32,5 +32,5 @@ void mtmips_spl_serial_init(void)
clrsetbits_32(base + SYSCTL_GPIOMODE_REG, UARTF_SHARE_MODE_M,
UARTF_MODE_UARTF_GPIO << UARTF_SHARE_MODE_S);
#endif
#endif /* CONFIG_SPL_SERIAL_SUPPORT */
#endif /* CONFIG_SPL_SERIAL */
}

View file

@ -29,7 +29,7 @@ config BOARD_MT7628_RFB
config BOARD_VOCORE2
bool "VoCore2"
select SPL_SERIAL_SUPPORT
select SPL_SERIAL
select SPL_UART2_SPIS_PINMUX
help
VoCore VoCore2 board has a MT7628 SoC with 128 MiB of RAM
@ -39,7 +39,7 @@ endchoice
config SPL_UART2_SPIS_PINMUX
bool "Use alternative pinmux for UART2 in SPL stage"
depends on SPL_SERIAL_SUPPORT
depends on SPL_SERIAL
help
Select this if the UART2 of your board is connected to GPIO 16/17
(shared with SPIS) rather than the usual GPIO 20/21.

View file

@ -11,7 +11,7 @@
void mtmips_spl_serial_init(void)
{
#ifdef CONFIG_SPL_SERIAL_SUPPORT
#ifdef CONFIG_SPL_SERIAL
void __iomem *base = ioremap_nocache(SYSCTL_BASE, SYSCTL_SIZE);
#if CONFIG_CONS_INDEX == 1
@ -30,5 +30,5 @@ void mtmips_spl_serial_init(void)
1 << SPIS_MODE_S);
#endif /* CONFIG_SPL_UART2_SPIS_PINMUX */
#endif /* CONFIG_CONS_INDEX */
#endif /* CONFIG_SPL_SERIAL_SUPPORT */
#endif /* CONFIG_SPL_SERIAL */
}

View file

@ -17,7 +17,7 @@ void __noreturn board_init_f(ulong dummy)
{
spl_init();
#ifdef CONFIG_SPL_SERIAL_SUPPORT
#ifdef CONFIG_SPL_SERIAL
/*
* mtmips_spl_serial_init() is useful if debug uart is enabled,
* or DM based serial is not enabled.

View file

@ -473,7 +473,7 @@ void board_init_f(ulong dummy)
/* setup GP timer */
timer_init();
#ifdef CONFIG_SPL_SERIAL_SUPPORT
#ifdef CONFIG_SPL_SERIAL
setup_iomux_uart();
preloader_console_init();
#endif

View file

@ -249,7 +249,7 @@ static struct emif_regs ddr3_icev2_emif_reg_data = {
#ifdef CONFIG_SPL_OS_BOOT
int spl_start_uboot(void)
{
#ifdef CONFIG_SPL_SERIAL_SUPPORT
#ifdef CONFIG_SPL_SERIAL
/* break into full u-boot on 'c' */
if (serial_tstc() && serial_getc() == 'c')
return 1;

View file

@ -88,9 +88,9 @@ obj-$(CONFIG_HWCONFIG) += hwconfig.o
obj-$(CONFIG_BOUNCE_BUFFER) += bouncebuf.o
ifdef CONFIG_SPL_BUILD
ifdef CONFIG_TPL_BUILD
obj-$(CONFIG_TPL_SERIAL_SUPPORT) += console.o
obj-$(CONFIG_TPL_SERIAL) += console.o
else
obj-$(CONFIG_SPL_SERIAL_SUPPORT) += console.o
obj-$(CONFIG_SPL_SERIAL) += console.o
endif
else
obj-y += console.o

View file

@ -1108,7 +1108,7 @@ config SPL_SATA_RAW_U_BOOT_SECTOR
Sector on the SATA disk to load U-Boot from, when the SATA disk is being
used in raw mode. Units: SATA disk sectors (1 sector = 512 bytes).
config SPL_SERIAL_SUPPORT
config SPL_SERIAL
bool "Support serial"
select SPL_PRINTF
select SPL_STRTO
@ -1258,7 +1258,7 @@ endchoice
config SPL_USB_SDP_SUPPORT
bool "Support SDP (Serial Download Protocol)"
depends on SPL_SERIAL_SUPPORT
depends on SPL_SERIAL
help
Enable Serial Download Protocol (SDP) device support in SPL. This
allows to download images into memory and execute (jump to) them
@ -1284,7 +1284,7 @@ config SPL_WATCHDOG
config SPL_YMODEM_SUPPORT
bool "Support loading using Ymodem"
depends on SPL_SERIAL_SUPPORT
depends on SPL_SERIAL
help
While loading from serial is slow it can be a useful backup when
there is no other option. The Ymodem protocol provides a reliable
@ -1571,12 +1571,12 @@ config TPL_RTC
needed. This enables the drivers in drivers/rtc as part of an TPL
build.
config TPL_SERIAL_SUPPORT
config TPL_SERIAL
bool "Support serial"
select TPL_PRINTF
select TPL_STRTO
help
Enable support for serial in TPL. See SPL_SERIAL_SUPPORT for
Enable support for serial in TPL. See SPL_SERIAL for
details.
config TPL_SPI_FLASH_SUPPORT
@ -1620,7 +1620,7 @@ config TPL_DM_SPI_FLASH
config TPL_YMODEM_SUPPORT
bool "Support loading using Ymodem"
depends on TPL_SERIAL_SUPPORT
depends on TPL_SERIAL
help
While loading from serial is slow it can be a useful backup when
there is no other option. The Ymodem protocol provides a reliable

View file

@ -623,7 +623,7 @@ static int boot_from_devices(struct spl_image_info *spl_image,
if (CONFIG_IS_ENABLED(SHOW_ERRORS))
ret = -ENXIO;
loader = spl_ll_find_loader(bootdev);
if (CONFIG_IS_ENABLED(SERIAL_SUPPORT) &&
if (CONFIG_IS_ENABLED(SERIAL) &&
CONFIG_IS_ENABLED(LIBCOMMON_SUPPORT) &&
!IS_ENABLED(CONFIG_SILENT_CONSOLE)) {
if (loader)
@ -821,7 +821,7 @@ void board_init_r(gd_t *dummy1, ulong dummy2)
*/
void preloader_console_init(void)
{
#ifdef CONFIG_SPL_SERIAL_SUPPORT
#ifdef CONFIG_SPL_SERIAL
gd->baudrate = CONFIG_BAUDRATE;
serial_init(); /* serial communications setup */

View file

@ -5,7 +5,7 @@ CONFIG_ENV_OFFSET=0x100000
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pa_36b"
CONFIG_SPL_TEXT_BASE=0xFF800000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_TPL_LIBCOMMON_SUPPORT=y
CONFIG_TPL_LIBGENERIC_SUPPORT=y
CONFIG_SPL_DRIVERS_MISC=y
@ -32,7 +32,7 @@ CONFIG_TPL_ENV_SUPPORT=y
CONFIG_TPL_I2C=y
CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_TPL_NAND_SUPPORT=y
CONFIG_TPL_SERIAL_SUPPORT=y
CONFIG_TPL_SERIAL=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_IMLS=y
CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3

View file

@ -8,7 +8,7 @@ CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pa_36b"
CONFIG_SPL_TEXT_BASE=0xD0001000
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_MPC85xx=y

View file

@ -8,7 +8,7 @@ CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pa_36b"
CONFIG_SPL_TEXT_BASE=0xD0001000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y

View file

@ -5,7 +5,7 @@ CONFIG_ENV_OFFSET=0x100000
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pa"
CONFIG_SPL_TEXT_BASE=0xFF800000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_TPL_LIBCOMMON_SUPPORT=y
CONFIG_TPL_LIBGENERIC_SUPPORT=y
CONFIG_SPL_DRIVERS_MISC=y
@ -31,7 +31,7 @@ CONFIG_TPL_ENV_SUPPORT=y
CONFIG_TPL_I2C=y
CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_TPL_NAND_SUPPORT=y
CONFIG_TPL_SERIAL_SUPPORT=y
CONFIG_TPL_SERIAL=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_IMLS=y
CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3

View file

@ -8,7 +8,7 @@ CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pa"
CONFIG_SPL_TEXT_BASE=0xD0001000
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_MPC85xx=y

View file

@ -8,7 +8,7 @@ CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pa"
CONFIG_SPL_TEXT_BASE=0xD0001000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y

View file

@ -5,7 +5,7 @@ CONFIG_ENV_OFFSET=0x100000
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pb_36b"
CONFIG_SPL_TEXT_BASE=0xFF800000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_TPL_LIBCOMMON_SUPPORT=y
CONFIG_TPL_LIBGENERIC_SUPPORT=y
CONFIG_SPL_DRIVERS_MISC=y
@ -33,7 +33,7 @@ CONFIG_TPL_ENV_SUPPORT=y
CONFIG_TPL_I2C=y
CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_TPL_NAND_SUPPORT=y
CONFIG_TPL_SERIAL_SUPPORT=y
CONFIG_TPL_SERIAL=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_IMLS=y
CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3

View file

@ -8,7 +8,7 @@ CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pb_36b"
CONFIG_SPL_TEXT_BASE=0xD0001000
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_MPC85xx=y

View file

@ -8,7 +8,7 @@ CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pb_36b"
CONFIG_SPL_TEXT_BASE=0xD0001000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y

View file

@ -5,7 +5,7 @@ CONFIG_ENV_OFFSET=0x100000
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pb"
CONFIG_SPL_TEXT_BASE=0xFF800000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_TPL_LIBCOMMON_SUPPORT=y
CONFIG_TPL_LIBGENERIC_SUPPORT=y
CONFIG_SPL_DRIVERS_MISC=y
@ -32,7 +32,7 @@ CONFIG_TPL_ENV_SUPPORT=y
CONFIG_TPL_I2C=y
CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_TPL_NAND_SUPPORT=y
CONFIG_TPL_SERIAL_SUPPORT=y
CONFIG_TPL_SERIAL=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_IMLS=y
CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3

View file

@ -8,7 +8,7 @@ CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pb"
CONFIG_SPL_TEXT_BASE=0xD0001000
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_MPC85xx=y

View file

@ -8,7 +8,7 @@ CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pb"
CONFIG_SPL_TEXT_BASE=0xD0001000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y

View file

@ -5,7 +5,7 @@ CONFIG_ENV_OFFSET=0x100000
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_DEFAULT_DEVICE_TREE="p1020rdb-pc_36b"
CONFIG_SPL_TEXT_BASE=0xFF800000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_TPL_LIBCOMMON_SUPPORT=y
CONFIG_TPL_LIBGENERIC_SUPPORT=y
CONFIG_SPL=y
@ -31,7 +31,7 @@ CONFIG_TPL_ENV_SUPPORT=y
CONFIG_TPL_I2C=y
CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_TPL_NAND_SUPPORT=y
CONFIG_TPL_SERIAL_SUPPORT=y
CONFIG_TPL_SERIAL=y
CONFIG_HUSH_PARSER=y
# CONFIG_AUTO_COMPLETE is not set
CONFIG_CMD_IMLS=y

View file

@ -8,7 +8,7 @@ CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_DEFAULT_DEVICE_TREE="p1020rdb-pc_36b"
CONFIG_SPL_TEXT_BASE=0xf8f81000
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_MPC85xx=y
# CONFIG_CMD_ERRATA is not set

View file

@ -8,7 +8,7 @@ CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_DEFAULT_DEVICE_TREE="p1020rdb-pc_36b"
CONFIG_SPL_TEXT_BASE=0xf8f81000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y

View file

@ -5,7 +5,7 @@ CONFIG_ENV_OFFSET=0x100000
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_DEFAULT_DEVICE_TREE="p1020rdb-pc"
CONFIG_SPL_TEXT_BASE=0xFF800000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_TPL_LIBCOMMON_SUPPORT=y
CONFIG_TPL_LIBGENERIC_SUPPORT=y
CONFIG_SPL=y
@ -30,7 +30,7 @@ CONFIG_TPL_ENV_SUPPORT=y
CONFIG_TPL_I2C=y
CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_TPL_NAND_SUPPORT=y
CONFIG_TPL_SERIAL_SUPPORT=y
CONFIG_TPL_SERIAL=y
CONFIG_HUSH_PARSER=y
# CONFIG_AUTO_COMPLETE is not set
CONFIG_CMD_IMLS=y

View file

@ -8,7 +8,7 @@ CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_DEFAULT_DEVICE_TREE="p1020rdb-pc"
CONFIG_SPL_TEXT_BASE=0xf8f81000
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_MPC85xx=y
# CONFIG_CMD_ERRATA is not set

View file

@ -8,7 +8,7 @@ CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_DEFAULT_DEVICE_TREE="p1020rdb-pc"
CONFIG_SPL_TEXT_BASE=0xf8f81000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y

View file

@ -5,7 +5,7 @@ CONFIG_ENV_OFFSET=0x100000
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_DEFAULT_DEVICE_TREE="p1020rdb-pd"
CONFIG_SPL_TEXT_BASE=0xFF800000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_TPL_LIBCOMMON_SUPPORT=y
CONFIG_TPL_LIBGENERIC_SUPPORT=y
CONFIG_SPL=y
@ -30,7 +30,7 @@ CONFIG_TPL_ENV_SUPPORT=y
CONFIG_TPL_I2C=y
CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_TPL_NAND_SUPPORT=y
CONFIG_TPL_SERIAL_SUPPORT=y
CONFIG_TPL_SERIAL=y
CONFIG_HUSH_PARSER=y
# CONFIG_AUTO_COMPLETE is not set
CONFIG_CMD_IMLS=y

View file

@ -8,7 +8,7 @@ CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_DEFAULT_DEVICE_TREE="p1020rdb-pd"
CONFIG_SPL_TEXT_BASE=0xf8f81000
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_MPC85xx=y
# CONFIG_CMD_ERRATA is not set

View file

@ -8,7 +8,7 @@ CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_DEFAULT_DEVICE_TREE="p1020rdb-pd"
CONFIG_SPL_TEXT_BASE=0xf8f81000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y

View file

@ -5,7 +5,7 @@ CONFIG_ENV_OFFSET=0x100000
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_DEFAULT_DEVICE_TREE="p2020rdb-pc_36b"
CONFIG_SPL_TEXT_BASE=0xFF800000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_TPL_LIBCOMMON_SUPPORT=y
CONFIG_TPL_LIBGENERIC_SUPPORT=y
CONFIG_SPL=y
@ -31,7 +31,7 @@ CONFIG_TPL_ENV_SUPPORT=y
CONFIG_TPL_I2C=y
CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_TPL_NAND_SUPPORT=y
CONFIG_TPL_SERIAL_SUPPORT=y
CONFIG_TPL_SERIAL=y
CONFIG_HUSH_PARSER=y
# CONFIG_AUTO_COMPLETE is not set
CONFIG_CMD_IMLS=y

View file

@ -8,7 +8,7 @@ CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_DEFAULT_DEVICE_TREE="p2020rdb-pc_36b"
CONFIG_SPL_TEXT_BASE=0xf8f81000
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_MPC85xx=y
# CONFIG_CMD_ERRATA is not set

View file

@ -8,7 +8,7 @@ CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_DEFAULT_DEVICE_TREE="p2020rdb-pc_36b"
CONFIG_SPL_TEXT_BASE=0xf8f81000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y

View file

@ -5,7 +5,7 @@ CONFIG_ENV_OFFSET=0x100000
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_DEFAULT_DEVICE_TREE="p2020rdb-pc"
CONFIG_SPL_TEXT_BASE=0xFF800000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_TPL_LIBCOMMON_SUPPORT=y
CONFIG_TPL_LIBGENERIC_SUPPORT=y
CONFIG_SPL=y
@ -30,7 +30,7 @@ CONFIG_TPL_ENV_SUPPORT=y
CONFIG_TPL_I2C=y
CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_TPL_NAND_SUPPORT=y
CONFIG_TPL_SERIAL_SUPPORT=y
CONFIG_TPL_SERIAL=y
CONFIG_HUSH_PARSER=y
# CONFIG_AUTO_COMPLETE is not set
CONFIG_CMD_IMLS=y

View file

@ -8,7 +8,7 @@ CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_DEFAULT_DEVICE_TREE="p2020rdb-pc"
CONFIG_SPL_TEXT_BASE=0xf8f81000
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_MPC85xx=y
# CONFIG_CMD_ERRATA is not set

View file

@ -8,7 +8,7 @@ CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_DEFAULT_DEVICE_TREE="p2020rdb-pc"
CONFIG_SPL_TEXT_BASE=0xf8f81000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y

View file

@ -9,7 +9,7 @@ CONFIG_ENV_OFFSET=0x100000
CONFIG_SYS_MALLOC_LEN=0xa00000
CONFIG_DEFAULT_DEVICE_TREE="t1024rdb"
CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_MPC85xx=y

View file

@ -10,7 +10,7 @@ CONFIG_SYS_MALLOC_LEN=0xa00000
CONFIG_DEFAULT_DEVICE_TREE="t1024rdb"
CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_MPC85xx=y

View file

@ -10,7 +10,7 @@ CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_SYS_MALLOC_LEN=0xa00000
CONFIG_DEFAULT_DEVICE_TREE="t1024rdb"
CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y

View file

@ -6,7 +6,7 @@ CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0x180000
CONFIG_DEFAULT_DEVICE_TREE="t1042d4rdb"
CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_MPC85xx=y

View file

@ -7,7 +7,7 @@ CONFIG_ENV_OFFSET=0x100000
CONFIG_DEFAULT_DEVICE_TREE="t1042d4rdb"
CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_MPC85xx=y

View file

@ -7,7 +7,7 @@ CONFIG_ENV_OFFSET=0x100000
CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_DEFAULT_DEVICE_TREE="t1042d4rdb"
CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y

View file

@ -7,7 +7,7 @@ CONFIG_ENV_OFFSET=0x140000
CONFIG_DEFAULT_DEVICE_TREE="t2080qds"
CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_FSL_USE_PCA9547_MUX=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_MPC85xx=y

View file

@ -8,7 +8,7 @@ CONFIG_DEFAULT_DEVICE_TREE="t2080qds"
CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_FSL_USE_PCA9547_MUX=y
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_MPC85xx=y

View file

@ -8,7 +8,7 @@ CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_DEFAULT_DEVICE_TREE="t2080qds"
CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_FSL_USE_PCA9547_MUX=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y

View file

@ -8,7 +8,7 @@ CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0x100000
CONFIG_DEFAULT_DEVICE_TREE="t2080rdb"
CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_MPC85xx=y

View file

@ -9,7 +9,7 @@ CONFIG_ENV_OFFSET=0x100000
CONFIG_DEFAULT_DEVICE_TREE="t2080rdb"
CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_MPC85xx=y

View file

@ -9,7 +9,7 @@ CONFIG_ENV_OFFSET=0x100000
CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_DEFAULT_DEVICE_TREE="t2080rdb"
CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y

View file

@ -8,7 +8,7 @@ CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0x100000
CONFIG_DEFAULT_DEVICE_TREE="t2080rdb"
CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_MPC85xx=y

View file

@ -9,7 +9,7 @@ CONFIG_ENV_OFFSET=0x100000
CONFIG_DEFAULT_DEVICE_TREE="t2080rdb"
CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_MPC85xx=y

View file

@ -9,7 +9,7 @@ CONFIG_ENV_OFFSET=0x100000
CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_DEFAULT_DEVICE_TREE="t2080rdb"
CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y

View file

@ -7,7 +7,7 @@ CONFIG_ENV_OFFSET=0x100000
CONFIG_DEFAULT_DEVICE_TREE="t4240rdb"
CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_MPC85xx=y

View file

@ -19,7 +19,7 @@ CONFIG_SPL_TEXT_BASE=0xe6300000
CONFIG_ARCH_RMOBILE_BOARD_STRING="Alt"
CONFIG_R8A7794=y
CONFIG_TARGET_ALT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y

View file

@ -7,7 +7,7 @@ CONFIG_DEFAULT_DEVICE_TREE="am335x-baltos"
CONFIG_AM33XX=y
CONFIG_TARGET_AM335X_BALTOS=y
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y

View file

@ -10,7 +10,7 @@ CONFIG_ENV_OFFSET=0x500000
CONFIG_DEFAULT_DEVICE_TREE="am335x-guardian"
CONFIG_AM33XX=y
CONFIG_TARGET_AM335X_GUARDIAN=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_BOOTCOUNT_BOOTLIMIT=3
CONFIG_SPL=y

View file

@ -10,7 +10,7 @@ CONFIG_DEFAULT_DEVICE_TREE="am335x-base0033"
CONFIG_AM33XX=y
CONFIG_TARGET_AM335X_IGEP003X=y
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y

View file

@ -9,7 +9,7 @@ CONFIG_DEFAULT_DEVICE_TREE="am335x-pdu001"
CONFIG_AM33XX=y
CONFIG_TARGET_PDU001=y
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y

View file

@ -10,7 +10,7 @@ CONFIG_DEFAULT_DEVICE_TREE="am335x-shc"
CONFIG_AM33XX=y
CONFIG_TARGET_AM335X_SHC=y
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_ENV_OFFSET_REDUND=0x9000
CONFIG_SPL_FS_FAT=y

View file

@ -10,7 +10,7 @@ CONFIG_DEFAULT_DEVICE_TREE="am335x-shc"
CONFIG_AM33XX=y
CONFIG_TARGET_AM335X_SHC=y
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_ENV_OFFSET_REDUND=0x9000
CONFIG_SPL_FS_FAT=y

View file

@ -10,7 +10,7 @@ CONFIG_DEFAULT_DEVICE_TREE="am335x-shc"
CONFIG_AM33XX=y
CONFIG_TARGET_AM335X_SHC=y
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_ENV_OFFSET_REDUND=0x9000
CONFIG_SPL_FS_FAT=y

View file

@ -10,7 +10,7 @@ CONFIG_DEFAULT_DEVICE_TREE="am335x-shc"
CONFIG_AM33XX=y
CONFIG_TARGET_AM335X_SHC=y
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_ENV_OFFSET_REDUND=0x9000
CONFIG_SPL_FS_FAT=y

View file

@ -9,7 +9,7 @@ CONFIG_DEFAULT_DEVICE_TREE="am335x-sl50"
CONFIG_AM33XX=y
CONFIG_TARGET_AM335X_SL50=y
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_ENV_OFFSET_REDUND=0x20000
CONFIG_SPL_FS_FAT=y

View file

@ -15,7 +15,7 @@ CONFIG_SPL_DM_SPI=y
CONFIG_DEFAULT_DEVICE_TREE="k3-am642-evm"
CONFIG_SPL_TEXT_BASE=0x80080000
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_SPL_FS_FAT=y

View file

@ -14,7 +14,7 @@ CONFIG_SPL_DM_SPI=y
CONFIG_DEFAULT_DEVICE_TREE="k3-am642-r5-evm"
CONFIG_SPL_TEXT_BASE=0x70000000
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_SPL_SIZE_LIMIT=0x190000

View file

@ -15,7 +15,7 @@ CONFIG_SPL_DM_SPI=y
CONFIG_DEFAULT_DEVICE_TREE="k3-am654-base-board"
CONFIG_SPL_TEXT_BASE=0x80080000
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_ENV_OFFSET_REDUND=0x6A0000

View file

@ -15,7 +15,7 @@ CONFIG_SPL_DM_SPI=y
CONFIG_DEFAULT_DEVICE_TREE="k3-am654-r5-base-board"
CONFIG_SPL_TEXT_BASE=0x41c00000
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_SPL_SIZE_LIMIT=0x7ec00

View file

@ -13,7 +13,7 @@ CONFIG_SYS_MALLOC_LEN=0x2000000
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="k3-am654-r5-base-board"
CONFIG_SPL_TEXT_BASE=0x41c00000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_SPL_FS_FAT=y

View file

@ -13,7 +13,7 @@ CONFIG_SYS_MALLOC_LEN=0x2000000
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="k3-am654-r5-base-board"
CONFIG_SPL_TEXT_BASE=0x41c00000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_SPL_FS_FAT=y

View file

@ -16,7 +16,7 @@ CONFIG_SPL_DM_SPI=y
CONFIG_DEFAULT_DEVICE_TREE="k3-am654-base-board"
CONFIG_SPL_TEXT_BASE=0x80080000
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_ENV_OFFSET_REDUND=0x6A0000

View file

@ -16,7 +16,7 @@ CONFIG_SPL_DM_SPI=y
CONFIG_DEFAULT_DEVICE_TREE="k3-am654-r5-base-board"
CONFIG_SPL_TEXT_BASE=0x41c00000
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_SPL_FS_FAT=y

View file

@ -19,7 +19,7 @@ CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="imx6-apalis"
CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_CMD_HDMIDETECT=y
CONFIG_AHCI=y

View file

@ -9,7 +9,7 @@ CONFIG_ENV_SIZE=0x4000
CONFIG_IMX_CONFIG=""
CONFIG_SPL_TEXT_BASE=0x00001000
CONFIG_TARGET_BG0900=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_SYS_LOAD_ADDR=0x42000000
CONFIG_BOOTDELAY=3

View file

@ -13,7 +13,7 @@ CONFIG_DEFAULT_DEVICE_TREE="am335x-brppt1-mmc"
CONFIG_AM33XX=y
CONFIG_TARGET_BRPPT1=y
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_ENV_OFFSET_REDUND=0x50000
# CONFIG_EXPERT is not set

View file

@ -12,7 +12,7 @@ CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="am335x-brppt1-nand"
CONFIG_AM33XX=y
CONFIG_TARGET_BRPPT1=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
# CONFIG_EXPERT is not set
CONFIG_SYS_LOAD_ADDR=0x80000000

View file

@ -14,7 +14,7 @@ CONFIG_SPL_DM_SPI=y
CONFIG_DEFAULT_DEVICE_TREE="am335x-brppt1-spi"
CONFIG_AM33XX=y
CONFIG_TARGET_BRPPT1=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_ENV_OFFSET_REDUND=0x30000
CONFIG_SPL_SPI_FLASH_SUPPORT=y

View file

@ -16,7 +16,7 @@ CONFIG_MX6QDL=y
CONFIG_TARGET_BRPPT2=y
CONFIG_SYS_MALLOC_LEN=0xa00000
CONFIG_DEFAULT_DEVICE_TREE="imx6dl-brppt2"
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SYS_BOOTCOUNT_ADDR=0x020CC068
CONFIG_SPL=y
CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y

View file

@ -14,7 +14,7 @@ CONFIG_DEFAULT_DEVICE_TREE="am335x-brsmarc1"
CONFIG_AM33XX=y
CONFIG_SYS_MPUCLK=600
CONFIG_TARGET_BRSMARC1=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_SYS_MALLOC_F_LEN=0x4000
CONFIG_SPL=y
CONFIG_ENV_OFFSET_REDUND=0x30000

Some files were not shown because too many files have changed in this diff Show more