Commit graph

2161 commits

Author SHA1 Message Date
York Sun
80d261881f powerpc: T2080QDS: Remove macro T2080QDS
Use TARGET_T2080QDS from Kconfig instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2017-01-04 19:40:26 -05:00
York Sun
960286b6d9 powerpc: T1024RDB: Remove macro CONFIG_T1024RDB
Use TARGET_T1024RDB from Kconfig instead.

Signed-off-by: York Sun <york.sun@nxp.com>
[trini: Get missing hunk in board/freescale/t102xrdb/ddr.c]
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-01-04 19:40:24 -05:00
York Sun
9082405d47 powerpc: T1023RDB: Remove macro CONFIG_T1023RDB
Use TARGET_T1023RDB from Kconfig instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2017-01-04 19:40:22 -05:00
Fabio Estevam
cfb37772a1 mx6qsabreauto: Fix the EIM clock for the mx6qp variant
On the MX6Q the aclk_eim_slow_podf field is '1' after POR, while on the
MX6DQP it is '3'.

This makes the EIM clock to be only 66MHz on the mx6qp variant, instead of
132 MHz.

Instead of relying on the POR values for the CSMR1 register, make sure to
manually configure the clk_eim_slow_sel field as '00' so that EIM clock is
derived from AXI clock and the aclk_eim_slow_podf field as '1' so that EIM
clock can be AXI clock divided by 2.

This way a consistent EIM clock frequency is configured for all the mx6
variants.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
2017-01-02 17:12:37 +01:00
Peng Fan
47895838a4 imx: mx6sllevk: add MAINTAINERS file
add MAINTAINERS files

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2016-12-27 11:24:19 -05:00
Tom Rini
8ea05705a7 Merge branch 'master' of git://www.denx.de/git/u-boot-imx
Migrate CONFIG_ARCH_USE_MEMSET/MEMCPY with this merge.

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-12-18 17:43:20 -05:00
Peng Fan
8e1d92fdbc imx: mx6sllevk: add plugin support
Add plugin support for mx6sllevk board.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2016-12-16 11:38:24 +01:00
Peng Fan
47f73504d8 arm: imx: add i.MX6SLL EVK board support
Add i.MX6SLL EVK board support.
1. Add imx6sll-evk device tree.
2. Enable SDHC/I2C/UART.
3. Enable REGULATOR/PMIC/I2C/GPIO/SDHC/PINCTRL driver.

Boot Log:
U-Boot 2016.11-00127-gc635871-dirty (Nov 24 2016 - 13:28:19 +0800)

CPU:   Freescale i.MX6SLL rev1.0 at 792MHz
CPU:   Commercial temperature grade (0C to 95C)Reset cause: POR
Model: Freescale i.MX6SLL EVK Board
Board: MX6SLL EVK
DRAM:  2 GiB
i2c bus 0 at 35258368, no gpio pinctrl state.
PMIC: PFUZE100! DEV_ID=0x10 REV_ID=0x21
MMC:   FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
In:    serial
Out:   serial
Err:   serial
Net:   CPU Net Initialization Failed
No ethernet found.
Hit any key to stop autoboot:  0

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2016-12-16 11:38:24 +01:00
Peng Fan
708f692753 imx: clock: gate clk before changing pix clk mux
The LCDIF Pixel clock mux is not glitchless, so need
to gate before changing mux.

Also change enable_lcdif_clock prototype with a new input
parameter to indicate disable or enable.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2016-12-16 11:38:24 +01:00
macro.wave.z@gmail.com
c151cb5b51 ARMv8: LS1043A: Enable LS1043A default PSCI support
A most basic PSCI implementation with only one psci_version is added for
LS1043A, this can verify the generic PSCI framework, and more platform specific
implementation will be added later.

Signed-off-by: Hongbo Zhang <hongbo.zhang@nxp.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-12-15 11:57:56 -08:00
Shengzhou Liu
90101386f1 fsl/board/ddr: optimize board-specific cpo for erratum A-009942
Optimize board-specific cpo for erratum A-009942 on b4860qds,
ls1043aqds, ls1043ardb, ls1046aqds, ls1046ardb, ls2080ardb,
t102xqds, t102xrdb, t1040qds, t104xrdb, t208xqds, t208xrdb,
t4qds, t4rdb boards.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-12-15 11:56:39 -08:00
Shengzhou Liu
02fb276157 fsl/ddr: Add erratum_a009942_check_cpo and clean related erratum
- add additional function erratum_a009942_check_cpo to check if the
  board needs tuning CPO calibration for optimal setting.
- move ERRATUM_A009942(with revision to check cpo_sample option) from
  fsl_ddr_gen4.c to ctrl_regs.c for reuse on all DDR4/DDR3 parts.
- move ERRATUM_A008378 from fsl_ddr_gen4.c to ctrl_regs.c
- remove obsolete ERRATUM_A004934 which is replaced with ERRATUM_A009942.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com>
[YS: Replaced CONFIG_QEMU_E500 with CONFIG_ARCH_QEMU_E500]
Reviewed-by: York Sun <york.sun@nxp.com>
2016-12-05 08:31:45 -08:00
Tom Rini
4d6647ab17 Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2016-11-30 09:57:52 -05:00
Tom Rini
6b29a395b6 Merge git://git.denx.de/u-boot-mpc85xx 2016-11-29 19:42:48 -05:00
Angus Ainslie
9cd37b02a0 imx7: SPI: add suport for SPI flash in mikroBUS slot
Enable the escpi3 nets attached to the mikroBUS slot
on the i.MX7 Sabre evalution board. Also enble the SPI flash
commands to work with the "flash click" board.

This is V2 of this patch with changes recommended by the maintainer

CC: Jagan Teki <jteki@openedev.com>
2016-11-29 17:00:31 +01:00
York Sun
37376ae0dc powerpc: MPC8641HPCN: Remove macro CONFIG_MPC8641HPCN
Use TARGET_MPC8641HPCN from Kconfig instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:16 -08:00
York Sun
51f05ff914 powerpc: MPC8610HPCD: Remove macro CONFIG_MPC8610HPCD
Use TARGET_MPC8610HPCD from Kconfig instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:16 -08:00
York Sun
49ec8aa840 powerpc: T4240RDB: Remove macro CONFIG_T4240RDB
Use CONFIG_TARGET_T4240RDB instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:15 -08:00
York Sun
12ffdb3b12 powerpc: T4160RDB: Separate from T4240RDB in Kconfig
Use TARGET_T4160RDB to simplify Kconfig options.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:15 -08:00
York Sun
673c01c708 powerpc: T4240QDS: Remove macro CONFIG_T4240QDS
Use CONFIG_TARGET_T4240QDS instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:15 -08:00
York Sun
9c21d06c67 powerpc: T4160QDS: Separate from T4240QDS in Kconfig
Use TARGET_T4160QDS to simplify Kconfig options.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:15 -08:00
York Sun
01671e668b powerpc: T2080RDB: Rename from T208XRDB in Kconfig
T208XRDB only has one target T2080RDB. Use TARGET_T2080RDB in Kconfig
and clean up existing macros.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:14 -08:00
York Sun
638d5be055 powerpc: T208XQDS: Split as T2080QDS and T2081QDS
Use two separated targets in Kconfig to simplify configurations.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:14 -08:00
York Sun
78e5699523 powerpc: T104xRDB: Remove macro CONFIG_T104xRDB and T104xD4RDB
CONFIG_T104xRDB is defined in T104xRDB.h, so it is always enabled for
all T1040RDB, T1040D4RDB, T1042RDB, T1042D4RDB, T1042RDB_PI.
CONFIG_T104XD4RDB is defined for all T1040D4RDB, T1042D4RDB.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:14 -08:00
York Sun
0167369cff powerpc: T1042RDB: Remove macro CONFIG_T1042RDB
Use TARGET_T1042RDB instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:14 -08:00
York Sun
319ed24a8a powerpc: T1042D4RDB: Separate from T1042RDB in Kconfig
Use TARGET_T1042D4RDB in Kconfig to simplify config options.
Remove macro CONFIG_T1042D4RDB.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:14 -08:00
York Sun
55ed8ae367 powerpc: T1042RDB_PI: Split from T1042RDB in Kconfig
Use separated TARGET_T1042RDB_PI to simplify config options.
Remove macro CONFIG_T1042RDB_PI.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:14 -08:00
York Sun
6fcddd0985 powerpc: T1040RDB: Remove macro CONFIG_T1040RDB
Use CONFIG_TARGET_T1040RDB instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:13 -08:00
York Sun
a016735c79 powerpc: T1040D4RDB: Separate from T1040RDB in Kconfig
Use TARGET_T1040D4RDB in Kconfig to simplify config macros. Replace
CONFIG_T1040D4RDB with TARGET_T1040D4RDB and clean up existing macros.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:13 -08:00
York Sun
5d73701073 powerpc: T1040: Remove macro CONFIG_PPC_T1040
Replace CONFIG_PPC_T1040 with ARCH_T1040 in Kconfig and clean up
existing macros.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:13 -08:00
York Sun
95a809b918 powerpc: T104XRDB: Split to T1040RDB and T1042RDB in Kconfig
Split ARCH_T104XRDB as ARCH_T1040RDB and ARCH_T1042RDB in Kconfig to
simplify config options.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:13 -08:00
York Sun
e5d5f5a8be powerpc: T1024: Remove macro CONFIG_PPC_T1024
Replace CONFIG_PPC_T1024 with ARCH_T1024 in Kconfig and clean up
existing macros.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:13 -08:00
York Sun
6f53bd475a powerpc: T1024QDS: Rename Kconfig option to match the name
Rename TARGET_T102XQDS to TARGET_T1024QDS to match the name.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:13 -08:00
York Sun
08c752920d powerpc: T102xRDB: Split as T1023RDB and T1024RDB
The defconfig files are separated. Splitting targets in Kconfig simplifies
config options.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:12 -08:00
York Sun
b41f192b67 powerpc: B4420: Remove macro CONFIG_PPC_B4420
Replace CONFIG_PPC_B4420 with ARCH_B4420 in Kconfig and clean up
existing macros.
2016-11-23 23:42:12 -08:00
York Sun
d46a4a1378 powerpc: B4860QDS: Remove macro CONFIG_B4860QDS
Use CONFIG_TARGET_B4860QDS instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:12 -08:00
York Sun
45a8d11782 powerpc: B4420QDS: Split from B4860QDS in Kconfig
Use TARGET_B4420QDS to simplify Kconfig options.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:12 -08:00
York Sun
161b472482 powerpc: P5040DS: Remove macro CONFIG_P5040DS
Use CONFIG_TARGET_P5040DS instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:11 -08:00
York Sun
3b83649d53 powerpc: P5020DS: Remove macro CONFIG_P5020DS
Use CONFIG_TARGET_P5020DS instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:11 -08:00
York Sun
529fb06208 powerpc: P4080DS: Remove macro CONFIG_P4080DS
Use CONFIG_TARGET_P4080DS instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:11 -08:00
York Sun
850af2c7a9 powerpc: P3041DS: Remove macro CONFIG_P3041DS
Use CONFIG_TARGET_P3041DS instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:11 -08:00
York Sun
37107facbc powerpc: P2041RDB: Remove macro CONFIG_P2041RDB
Use CONFIG_TARGET_P2041RDB instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:10 -08:00
York Sun
e5cc150945 powerpc: P1_P2_RDB_PC: Drop TARGET_P1_P2_RDB_PC
All boards covered by this group have been converted to their own
targers. Drop TARGET_P1_P2_RDB_PC from Kconfig.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:09 -08:00
York Sun
8435aa777e powerpc: P2020RDB-PC: Separate from P1_P2_RDB_PC in Kconfig
Use TARGET_P2020RDB_PC instead of sharing with P1_P2_RDB_PC to
simplify Kconfig and config macros.

Remove macro CONFIG_P2020RDB.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:09 -08:00
York Sun
b0c98b4b9f powerpc: P1025RDB: Separate from P1_P2_RDB_PC in Kconfig
Use TARGET_P1025RDB instead of sharing with P1_P2_RDB_PC to
simplify Kconfig and config macros.

Remove macro CONFIG_P1025RDB.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:09 -08:00
York Sun
4eedabfe93 powerpc: P1024RDB: Separate from P1_P2_RDB_PC in Kconfig
Use TARGET_P1024RDB instead of sharing with TARGET_P1_P2_RDB_PC to
simplify Kconfig and macros.

Remove macro CONFIG_P1024RDB.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:09 -08:00
York Sun
da439db35a powerpc: P1021RDB: Separate from P1_P2_RDB_PC in Kconfig
Use TARGET_P1021RDB instead of sharing with TARGET_P1_P2_RDB_PC to
simplify Kconfig and macros.

Remove macro CONFIG_P1021RDB.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:09 -08:00
York Sun
e9bc8a8fc1 powerpc: P1020UTM: Separate from P1_P2_RDB_P2 in Kconfig
Use TARGET_P1020UTM instead of sharing with TARGET_P1_P2_RDB_PC
to simplify Kconfig and config macros.

Remove macro CONFIG_P1020UTM.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:08 -08:00
York Sun
f404b66ce1 powerpc: P1020RDB-PD: Separate from P1_P2_RDB_PC in Kconfig
Use TARGET_P1020RDB_PD instead of sharing with P1_P2_RDB_PC
to simplify Kconfig and config macros.

Remove macro CONFIG_P1020RDB_PD.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:08 -08:00
York Sun
aa14620c2e powerpc: P1020RDB-PC: Separate from P1_P2_RDB_PC in Kconfig
Use TARGET_P1020RDB_PC instead of sharing with TARGET_P1_P2_RDB_PC
to simplify Kconfig and config macros.

Remove macro CONFIG_P1020RDB_PC.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:08 -08:00
York Sun
fedae6ebaf powerpc: P1020MBG: Separate from P1_P2_RDB_PC in Kconfig
Use TARGET_P1020MBG instead of sharing with TARGET_P1_P2_RDB_PC to
simplify Kconfig and other macros.

Remove macro CONFIG_P1020MBG.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:08 -08:00
York Sun
aa6e241a4c powerpc: P1022DS: Remove macro CONFIG_P1022DS
Use CONFIG_TARGET_P1022DS instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:07 -08:00
York Sun
7601686c60 powerpc: P1010RDB: Remove macros CONFIG_P1010RDB_PA and CONFIG_P1010RDB_PB
Remove CONFIG_P1010RDB_PA and CONFIG_P1010RDB_PB and split TARGET_P1010RDB
to TARGET_P1010RDB_PA and TARGET_P1010RDB_PB in Kconfig.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:07 -08:00
York Sun
2fe0cd8582 powerpc: MPC8572DS: Remove macro CONFIG_MPC8572DS
Use CONFIG_TARGET_MPC8572DS instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:06 -08:00
York Sun
3759b5b649 powerpc: MPC8569MDS: Remove macro CONFIG_MPC8569MDS
Use CONFIG_TARGET_MPC8569MDS instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:06 -08:00
York Sun
2f2d54b7cd powerpc: MPC8555CDS: Remove macro CONFIG_MPC8555CDS
Use CONFIG_TARGET_MPC8555CDS instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:05 -08:00
York Sun
4096f350d5 powerpc: MPC8541CDS: Remove macro CONFIG_MPC8541CDS
Replace with CONFIG_TARGET_MPC8541CDS from Kconfig.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:05 -08:00
York Sun
30411e7cfc powerpc: MPC8536DS: Remove macro CONFIG_MPC8536DS
Use CONFIG_TARGET_MPC8536DS instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:04 -08:00
York Sun
ae59dded8d powerpc: MPC8544DS: Remove macro CONFIG_MPC8544DS
Use CONFIG_TARGET_MPC8544DS instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:03 -08:00
York Sun
4d08d5d9d5 powerpc: MPC8548CDS: Remove macro CONFIG_MPC8548CDS
Use CONFIG_TARGET_MPC8548CDS instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:03 -08:00
Priyanka Jain
9ae836cde7 armv8: fsl-layerscape: Add NXP LS2088A SoC support
The QorIQ LS2088A SoC is built on layerscape architecture.

It is similar to LS2080A SoC with some differences like
1)Timer controller offset is different
2)It has A72 cores
3)It supports TZASC module

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-11-22 11:37:54 -08:00
Yuan Yao
e2f95e3a6a arm: ls1021a: improve the core frequency to 1.2GHZ
Change core clock to 1.2GHz in the configurations for SD and NAND boot.

Signed-off-by: Yuan Yao <yao.yuan@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-11-21 09:20:32 -08:00
Shaohui Xie
c435a7c8c1 armv8: ls2080aqds: fix SGMII repeater settings
The current value to check whether the PHY was configured has dependency
on MC, it expects MC to start PCS AN, this is not true during boot up,
so it should be changed to remove the dependency.

The PHY's register space should be restore to default after accessing
extended space.

Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-11-21 09:20:32 -08:00
Priyanka Jain
fc35addea2 armv8: ls2080a: Update serdes protocol support
Add these serdes protocols
Serdes1: 0x39, 0x4B, 0x4C, 0x4D
Serdes2: 0x47, 0x57

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
[YS: Revise commit message]
Reviewed-by: York Sun <york.sun@nxp.com>
2016-11-21 09:20:32 -08:00
Shaohui Xie
fdc2b54cb8 armv8: ls1046aqds: add lpuart support
LPUART0 is used by default, and it's using platform clock.

Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-11-21 09:20:32 -08:00
Feng Li
20c700f8da armv7: Add support of ls1021a-iot board
The patch adds support for Freescale ls1021a-iot board.

Signed-off-by: Feng Li <feng.li_2@nxp.com>
[YS: rewrite commit message, fix whitespace in Kconfig]
Reviewed-by: York Sun <york.sun@nxp.com>
2016-11-21 09:20:32 -08:00
Alexander Graf
215b1fb9fa ls2080ardb: Reserve DP-DDR RAM
The DP-DDR shouldn't be exposed as conventional memory to an OS, so let's
rather claim it's a reserved region in the EFI memory map

Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-11-17 14:18:55 +01:00
Alexander Graf
b7b8410a8f ls2080: Exit dpaa only right before exiting U-Boot
On ls2080 we have a separate network fabric component which we need to
shut down before we enter Linux (or any other OS). Along with that also
comes configuration of the fabric using a description file.

Today we always stop and configure the fabric in the boot script and
(again) exit it on device tree generation. This works ok for the normal
booti case, but with bootefi the payload we're running may still want to
access the network.

So let's add a new fsl_mc command that defers configuration and stopping
the hardware to when we actually exit U-Boot, so that we can still use
the fabric from an EFI payload.

For existing boot scripts, nothing should change with this patch.

Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: York Sun <york.sun@nxp.com>
[agraf: Fix x86 build]
2016-11-17 14:18:55 +01:00
Diego Dorta
2ffec69b6f mx6ull_14x14_evk: Add README file
Add a README file to help users getting started with the board.

Signed-off-by: Diego Dorta <diego.dorta@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2016-11-13 15:54:35 -05:00
Fabio Estevam
4b6035da48 mx6sabresd: Make Ethernet functional again
Since commit ce412b79e7 ("drivers: net: phy: atheros: add separate
config for AR8031") ethernet does not work on mx6sabresd.

This commit correctly assigns ar8031_config() as the configuration
function for AR8031 in the same way as done in the Linux kernel.

However, on mx6sabresd design we need some additional configuration,
such as enabling the 125 MHz AR8031 output that needs to be done
in the board file.

This also aligns with the same method that the kernel performs
the AR8031 fixup in arch/arm/mach-imx/mach-imx6q.c.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-11-06 06:59:27 -05:00
Tom Rini
4f892924d2 Merge branch 'master' of git://www.denx.de/git/u-boot-imx
Signed-off-by: Tom Rini <trini@konsulko.com>

Conflicts:
	common/Kconfig
	configs/dms-ba16_defconfig
2016-10-28 11:12:03 -04:00
Jagan Teki
03bf9d58b9 imx: s/docs\/README.imximage/doc\/README.imximage/g
Fixed typo for doc/README.imximage on respective imximage.cfg files.

Cc: Tom Rini <trini@konsulko.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-10-26 16:53:16 +02:00
Peng Fan
ab1f75a7db imx: mx6ullevk: correct boot device macro
Correct boot device macro according to kconfig entry
in common/Kconfig

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2016-10-24 10:58:18 +02:00
Peng Fan
204d1f60c1 imx: mx6ullevk: support plugin
Add plugin code for mx6ullevk.
Define CONFIG_USE_IMXIMG_PLUGIN in defconfig file to use plugin code.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2016-10-24 10:58:18 +02:00
Diego Dorta
9cc3ad6c6a mx6sabresd: Add README file
Add a README to explain the steps for booting mx6sabresd in different ways:
    1. Booting via Normal U-Boot (u-boot.imx)
    2. Booting via SPL (SPL and u-boot.img)
    3. Booting via Falcon mode (SPL launches the kernel directly)

Signed-off-by: Diego Dorta <diego.dorta@nxp.com>
2016-10-17 09:18:32 +02:00
Diego Dorta
d96796ca23 mx6sabresd: Add Falcon mode support
Allow i.MX6Q Sabre SD to load the kernel and dtb via SPL in Falcon mode.

Based on the Falcon mode code for MX6 Gateworks Ventana board.

Signed-off-by: Diego Dorta <diego.dorta@nxp.com>
2016-10-17 09:18:01 +02:00
Zhao Qiang
c5938c10ef pbl: use "wait" command instead of "flush" command
PBL flush command is restricted to CCSR memory space. So use WAIT
PBI command to provide enough time for data to get flush in
target memory.

Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
[York Sun: rewrap commit message]
Reviewed-by: York Sun <york.sun@nxp.com>
2016-10-14 10:21:30 -07:00
Zhao Qiang
ec90ac7359 Txxx/RCW: Split unified RCW to RCWs for sd, spi and nand.
T series boards use unified RCW for sd, spi and nand boot.
Now split txxx_rcw.cfg to txxx_sd_rcw.cfg, txxx_spi_rcw.cfg
and txxx_nand_rcw.cfg for SPI/NAND/SD boot.
And modify RCW[PBI_SRC] for them:
	PBI_SRC=5            for SPI 24-bit addressing
	PBI_SRC=6            for SD boot
	PBI_SRC=14           for IFC NAND boot

Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-10-14 10:21:03 -07:00
Tom Rini
711b534120 Merge git://git.denx.de/u-boot-fsl-qoriq
Signed-off-by: Tom Rini <trini@konsulko.com>

Conflicts:
	include/configs/ls1021aqds.h
	include/configs/ls1021atwr.h
2016-10-12 08:29:42 -04:00
Tom Rini
f5fd45ff64 Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2016-10-08 09:33:37 -04:00
Simon Glass
ea022a3775 spi: Move freescale-specific code into a private header
At present there are two SPI functions only used by freescale which are
defined in the spi_flash.h header. One function name matches an existing
generic SPL function.

Move these into a private header to avoid confusion.

Arcturus looks like it does not actually support SPI, so drop the SPI code
from that board.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06 15:07:35 -04:00
Xiaoliang Yang
f85a8e8d1d armv7: LS1021a: enable i-cache in start.S
Delete CONFIG_SKIP_LOWLEVEL_INIT define in ls1021atwr.h and
ls1021aqds.h can let it run cpu_init_cp15 to enable i-cache. First
stage of u-boot can run faster after that. There is a description
about skip lowlevel init in board/freescale/ls1021atwr/README.

Signed-off-by: Xiaoliang Yang <xiaoliang.yang@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-10-06 09:55:08 -07:00
Sumit Garg
b259732d36 fsl_sec_mon: Update driver for Security Monitor
Update the API's for transition of Security Monitor states. Instead
of providing both initial and final states for transition, just
provide final state for transition as Security Monitor driver will
take care of it internally.

Signed-off-by: Sumit Garg <sumit.garg@nxp.com>
[York Sun: Reformatted commit message slightly]
Reviewed-by: York Sun <york.sun@nxp.com>
2016-10-06 09:54:14 -07:00
Peng Fan
55a42b33f2 arm: imx: add i.MX6ULL 14x14 EVK board support
Add i.MX6ULL EVK board support:
Add device tree file, which is copied from NXP Linux.
Enabled DM_MMC, DM_GPIO, DM_I2C, DM_SPI, PINCTRL, DM_REGULATOR.
The uart iomux settings are still keeped in board file.

Boot Log:
U-Boot 2016.09-rc1-00366-gbb419ef-dirty (Aug 11 2016 - 13:08:58 +0800)

CPU:   Freescale i.MX6ULL rev1.0 at 396MHz
CPU:   Commercial temperature grade (0C to 95C) at 15C
Reset cause: POR
Model: Freescale i.MX6 ULL 14x14 EVK Board
Board: MX6ULL 14x14 EVK
DRAM:  512 MiB
MMC:   initialized IMX pinctrl driver
FSL_SDHC: 0, FSL_SDHC: 1
In:    serial
Out:   serial
Err:   serial
Net:   CPU Net Initialization Failed
No ethernet found.
Hit any key to stop autoboot:  0
=> mmc dev 1
switch to partitions #0, OK
mmc1 is current device

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2016-10-04 15:42:07 +02:00
Fabio Estevam
3b30eece27 mx6sabresd: Make SPL DDR configuration to match the DCD table
When using SPL on i.mx6 we frequently notice some DDR initialization
mismatches between the SPL code and the non-SPL code.

This causes stability issues like the ones reported at 7dbda25ecd
("mx6ul_14x14_evk: Pass refsel and refr fields to avoid hang") and also:
http://lists.denx.de/pipermail/u-boot/2016-September/266355.html .

As the non-SPL code have been tested for long time and proves to be reliable,
let's configure the DDR in the exact same way as the non-SPL case.

The idea is simple: just use the DCD table and write directly to the DDR
registers.

Retrieved the DCD tables from:
board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg
and
board/freescale/mx6sabresd/mx6qp.cfg
(NXP U-Boot branch imx_v2015.04_4.1.15_1.0.0_ga)

This method makes it easier for people converting from non-SPL to SPL code.

Other benefit is that the SPL binary size is reduced from 44 kB to 39.9 kB.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-10-04 12:01:14 +02:00
Sriram Dash
a5c289b9bc usb: fsl: Rename fdt_fixup_dr_usb
The function fdt_fixup_dr_usb is specific to fsl/nxp. So,
make the function name explicit and rename fdt_fixup_dr_usb
into fsl_fdt_fixup_dr_usb.

Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
2016-09-27 23:30:27 +02:00
Tom Rini
cbe7706ab8 Merge git://git.denx.de/u-boot-fsl-qoriq
trini: Drop local memset() from
examples/standalone/mem_to_mem_idma2intr.c

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-26 17:10:56 -04:00
York Sun
1fdcc8dfc7 driver: ddr: fsl_mmdc: Pass board parameters through data structure
Instead of using multiple macros, a data structure is used to pass
board-specific parameters to MMDC DDR driver.

Signed-off-by: York Sun <york.sun@nxp.com>
CC: Shengzhou Liu <Shengzhou.Liu@nxp.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-09-26 08:53:07 -07:00
Masahiro Yamada
1221ce459d treewide: replace #include <asm/errno.h> with <linux/errno.h>
Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have
the same content.  (both just wrap <asm-generic/errno.h>)

Replace all include directives for <asm/errno.h> with <linux/errno.h>.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
[trini: Fixup include/clk.]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-23 17:55:42 -04:00
Masahiro Yamada
63a7578e4e arch, board: squash lines for immediate return
Remove unneeded variables and assignments.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
Reviewed-by: Angelo Dureghello <angelo@sysam.it>
2016-09-23 17:53:53 -04:00
Shaohui Xie
126fe70d77 armv8: ls1046aqds: Add LS1046AQDS board support
LS1046AQDS Specification:
-------------------------
Memory subsystem:
 * 8GByte DDR4 SDRAM (64bit bus)
 * 128 Mbyte NOR flash single-chip memory
 * 512 Mbyte NAND flash
 * 64 Mbyte high-speed SPI flash
 * SD connector to interface with the SD memory card

Ethernet:
 * Two XFI 10G ports
 * Two SGMII ports
 * Two RGMII ports

PCIe: supports Gen 1 and Gen 2

SATA 3.0: one SATA 3.0 port

USB 3.0: two micro AB connector and one type A connector

UART: supports two UARTs up to 115200 bps for console

Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com>
Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com>
Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-09-14 14:11:10 -07:00
Mingkai Hu
dd02936f81 armv8: ls1046ardb: Add LS1046ARDB board support
LS1046ARDB Specification:
-------------------------
Memory subsystem:
 * 8GByte DDR4 SDRAM (64bit bus)
 * 512 Mbyte NAND flash
 * Two 64 Mbyte high-speed SPI flash
 * SD connector to interface with the SD memory card
 * On-board 4G eMMC

Ethernet:
 * Two XFI 10G ports
 * Two SGMII ports
 * Two RGMII ports

PCIe:
 * PCIe1 (SerDes2 Lane0) to miniPCIe slot
 * PCIe2 (SerDes2 Lane1) to x2 PCIe slot
 * PCIe3 (SerDes2 Lane2) to x4 PCIe slot

SATA:
 * SerDes2 Lane3 to SATA port

USB 3.0: one super speed USB 3.0 type A port
	 one Micro-AB port

UART: supports two UARTs up to 115200 bps for console

Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com>
Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com>
Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-09-14 14:11:00 -07:00
Shengzhou Liu
b9e745bbe2 driver/ddr/fsl: Add general MMDC driver and reuse common MMDC driver for ls1012a
This general MMDC driver adds basic support for Freescale MMDC
(Multi Mode DDR Controller). Currently MMDC is integrated on ARMv8
LS1012A SoC for DDR3L, there will be a update to this driver to
support more flexible configuration if new features (DDR4, multiple
controllers/chip selections, etc) are implimented in future.

Meantime, reuse common MMDC driver for LS1012ARDB/LS1012AQDS/
LS1012AFRDM.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-09-14 14:08:22 -07:00
Shengzhou Liu
93a6d3284c armv7:ls1021a: Enable workaround for DDR erratum A-009942
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-09-14 14:08:15 -07:00
Hongbo Zhang
214ffae02d nxp: ls102xa: add LS1 PSCI system suspend
The deep sleep function of LS1 platform, is mapped into PSCI system
suspend function, this patch adds implementation of it.

Signed-off-by: Hongbo Zhang <hongbo.zhang@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-09-14 14:08:04 -07:00
York Sun
b63a950629 armv8: ls2080a: Remove debug server support
Debug server feature has been dropped from roadmap.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-09-14 14:07:19 -07:00
Hou Zhiqiang
b392a6d4b0 fsl-layerscape: Add workaround for PCIe erratum A010315
As the access to serders protocol unselected PCIe controller will
hang. So disable the R/W permission to unselected PCIe controller
including its CCSR, IO space and memory space according to the
serders protocol field of RCW.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-09-14 14:07:13 -07:00
Hou Zhiqiang
664b652058 fsl: csu: add an API to set R/W permission to PCIe
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-09-14 14:07:08 -07:00
Hou Zhiqiang
c37fdbdbb0 fsl: csu: add an API to set individual device access permission
Add this API to make the individual device is able to be set to
the specified permission.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-09-14 14:07:02 -07:00
Hou Zhiqiang
341238fd13 arm: fsl-layerscape: move forward the non-secure access permission setup
Move forward the basic non-secure access enable operation, so the
subsequent individual device access permission can override it.
And collect the dispersed callers in board level, and then move
them to SoC level.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-09-14 14:06:56 -07:00
Sumit Garg
285c74811e board: ls1043ardb: move sec_init to board_init
sec_init() which was earlier called in misc_init_r()
is now done in board_init() before PPA init as SEC
block will be used during PPA image validation.

Signed-off-by: Aneesh Bansal <aneesh.bansal@nxp.com>
Signed-off-by: Sumit Garg <sumit.garg@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-09-14 14:06:23 -07:00
Fabio Estevam
ab25f0f69f mx6ul_14x14_ev: Enable the CCGR clocks earlier
To be in the safe side we need to enable the CCGR clocks prior
to calling arch_cpu_init().

Inspired by Tim Harvey's commit d783c2744f ("imx: ventana: fix boot to SD").

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Eric Nelson <eric@nelint.com>
Tested-by: Eric Nelson <eric@nelint.com>
2016-09-06 18:22:48 +02:00
Fabio Estevam
b343417e29 mx6ul_14x14_evk: Adjust SPL DDR3 settings
Adjust DDR3 initialization done in SPL by comparing them against
the NXP DCD table.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Eric Nelson <eric@nelint.com>
2016-09-06 18:22:48 +02:00
Fabio Estevam
7dbda25ecd mx6ul_14x14_evk: Pass refsel and refr fields to avoid hang
When running a NXP 4.1 kernel with U-Boot mainline on a mx6ul-evk,
we observe a hang when going into the lowest operational point of cpufreq.

This hang issue does not happen on the NXP U-Boot version.

After comparing the SPL DDR initialization against the DCD table
from NXP U-Boot, the key difference that causes the hang is the
MDREF register setting:

DATA 4 0x021B0020 0x00000800

,which means:

REF_SEL = 0 --> Periodic refresh cycle: 64kHz
REFR = 1 ---> Refresh Rate - 2 refreshes

So adjust the MDREF initialization for mx6ul_evk accordingly
to fix the kernel hang issue at low bus frequency.

Reported-by: Eric Nelson <eric@nelint.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Eric Nelson <eric@nelint.com>
2016-09-06 18:22:48 +02:00
Fabio Estevam
edf0093732 mx6: ddr: Allow changing REFSEL and REFR fields
Currently MX6 SPL DDR initialization hardcodes the REF_SEL and
REFR fields of the MDREF register as 1 and 7, respectively for
DDR3 and 0 and 3 for LPDDR2.

Looking at the MDREF initialization done via DCD we see that
boards do need to initialize these fields differently:

$ git grep 0x021b0020 board/
board/bachmann/ot1200/mx6q_4x_mt41j128.cfg:DATA 4 0x021b0020 0x00005800
board/ccv/xpress/imximage.cfg:DATA 4 0x021b0020 0x00000800 /* MMDC0_MDREF */
board/freescale/mx6qarm2/imximage.cfg:DATA 4 0x021b0020 0x7800
board/freescale/mx6qarm2/imximage.cfg:DATA 4 0x021b0020 0x00005800
board/freescale/mx6qarm2/imximage_mx6dl.cfg:DATA 4 0x021b0020 0x00005800
board/freescale/mx6qarm2/imximage_mx6dl.cfg:DATA 4 0x021b0020 0x00005800
board/freescale/mx6qsabreauto/imximage.cfg:DATA 4 0x021b0020 0x00005800
board/freescale/mx6qsabreauto/mx6dl.cfg:DATA 4 0x021b0020 0x00005800
board/freescale/mx6qsabreauto/mx6qp.cfg:DATA 4 0x021b0020 0x00005800
board/freescale/mx6sabresd/mx6dlsabresd.cfg:DATA 4      0x021b0020 0x00005800
board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg:DATA 4 0x021b0020 0x00005800
board/freescale/mx6slevk/imximage.cfg:DATA 4 0x021b0020 0x00001800
board/freescale/mx6sxsabreauto/imximage.cfg:DATA 4 0x021b0020 0x00000800
board/freescale/mx6sxsabresd/imximage.cfg:DATA 4 0x021b0020 0x00000800
board/warp/imximage.cfg:DATA 4 0x021b0020 0x00001800

So introduce a mechanism for users to be able to configure
REFSEL and REFR fields as needed.

Keep all the mx6 SPL users in their current REF_SEL and REFR values,
so no functional changes for the existing users.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Eric Nelson <eric@nelint.com>
2016-09-06 18:22:48 +02:00
Fabio Estevam
946db0cbd0 mx7dsabresd: Directly write to register LDOGCTL
Register LDOGCTL contains only bit 0 as a valid bit, so there is no need
to do a read-modify-write operation.

Simplify the code by writing directly to this register.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-09-06 18:22:48 +02:00
Fabio Estevam
78eed0a6d5 mx7dsabresd: Directly write to register LDOGCTL
Register LDOGCTL contains only bit 0 as a valid bit, so there is no need
to do a read-modify-write operation.

Simplify the code by writing directly to this register.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-09-06 18:22:48 +02:00
Eric Nelson
eb3813ad1a mx6ul_14x14_evk: don't use array for SD2 card detect pad
Only a single pad is changed to change sdhc2_dat3 from an
SDIO pin to and from GPIO4:5, so remove the array and use
the imx_iomux_v3_setup_pad() routine.

Signed-off-by: Eric Nelson <eric@nelint.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-09-06 18:22:48 +02:00
Fabio Estevam
76b21efd55 mx7dsabresd: Print secure/non-secure mode info
mx7dsabresd has two targets:

- mx7dsabresd_defconfig: boots in non-secure mode
- mx7dsabresd_secure_defconfig: boots in secure mode

Print the mode that is being used to help users to easily identify
which target is running on the board.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-09-06 18:22:48 +02:00
Masahiro Yamada
c21fc7e223 treewide: fix "followings" to "following"
Most of them are my mistakes.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-08-26 17:04:58 -04:00
York Sun
473af36a88 board/freescale: Update MAINTAINERS files
Update maintainers for secure boot targets.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-08-02 09:47:34 -07:00
Tom Rini
4711e7f7af Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2016-07-28 08:45:00 -04:00
Fabio Estevam
4c97077ce7 mx7dsabresd: MAINTAINERS: Add mx7dsabresd_secure_defconfig
Add an entry for the mx7dsabresd_secure_defconfig target.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-07-28 13:27:21 +02:00
Diego Dorta
ec1935a243 mx6ul_14x14_evk: Remove unused define
Remove unused define constant.

Signed-off-by: Diego Dorta <diego.dorta@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-07-28 13:27:21 +02:00
Qianyu Gong
8401c7103d armv8: ls1043aqds: add IFC fixup in case QSPI is enabled
QSPI and IFC are pin-multiplexed on LS1043AQDS board. If QSPI is
enabled, IFC would not be initialized correctly. So disable the IFC
node for Linux.

Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-07-26 09:03:50 -07:00
Hongbo Zhang
aeb901f2a6 ARMv7: PSCI: ls102xa: add more PSCI v1.0 functions implemention
This patch implements PSCI functions for ls102xa SoC following PSCI v1.0,
they are as the list:
    psci_version,
    psci_features,
    psci_cpu_suspend,
    psci_affinity_info,
    psci_system_reset,
    psci_system_off.

Tested on LS1021aQDS, LS1021aTWR.

Signed-off-by: Wang Dongsheng <dongsheng.wang@nxp.com>
Signed-off-by: Hongbo Zhang <hongbo.zhang@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-07-26 09:02:49 -07:00
York Sun
dbb9d04fbd armv8: ls1043aqds: Update MAINTAINERS
Add ls1043aqds_lpuart_defconfig to file list.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-07-26 09:01:58 -07:00
York Sun
0c14c4d65b armv8: ls2080aqds: Update MAINTAINERS
Add ls2080aqds_qspi_defconfig to file list.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-07-26 09:01:58 -07:00
Sumit Garg
e7e720c2ce arm: ls1021atwr: Add SD secure boot target
Add SD secure boot target for ls1021atwr.
Implement board specific spl_board_init() to setup CAAM stream ID and
corresponding stream ID in SMMU. Change the u-boot size defined by a
macro for copying the main U-Boot by SPL to also include the u-boot
Secure Boot header size as header is appended to u-boot image. So header
will also be copied from SD to DDR.

Reviewed-by: Aneesh Bansal <aneesh.bansal@nxp.com>
Signed-off-by: Sumit Garg <sumit.garg@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-07-26 09:01:49 -07:00
Sumit Garg
028ac8c733 SECURE_BOOT: Enable chain of trust in SPL framework
Override jump_to_image_no_args function to include validation of
u-boot image using spl_validate_uboot before jumping to u-boot image.
Also define macros in SPL framework to enable crypto operations.

Reviewed-by: Aneesh Bansal <aneesh.bansal@nxp.com>
Signed-off-by: Sumit Garg <sumit.garg@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-07-26 09:01:35 -07:00
Sumit Garg
aa36c84edf powerpc/mpc85xx: T104x: Add nand secure boot target
For mpc85xx SoCs, the core begins execution from address 0xFFFFFFFC.
In non-secure boot scenario from NAND, this address will map to CPC
configured as SRAM. But in case of secure boot, this default address
always maps to IBR (Internal Boot ROM).
The IBR code requires that the bootloader(U-boot) must lie in 0 to 3.5G
address space i.e. 0x0 - 0xDFFFFFFF.

For secure boot target from NAND, the text base for SPL is kept same as
non-secure boot target i.e. 0xFFFx_xxxx but the SPL U-boot binary will
be copied to CPC configured as SRAM with address in 0-3.5G(0xBFFC_0000)
As a the virtual and physical address of CPC would be different. The
virtual address 0xFFFx_xxxx needs to be mapped to physical address
0xBFFx_xxxx.

Create a new PBI file to configure CPC as SRAM with address 0xBFFC0000
and update DCFG SCRTACH1 register with location of Header required for
secure boot.

The changes are similar to
commit 467a40dfe3
    powerpc/mpc85xx: SECURE BOOT- NAND secure boot target for P3041

While P3041 has a 1MB CPC and does not require SPL. On T104x, CPC
is only 256K and thus SPL framework is used.
The changes are only applicable for SPL U-Boot running out of CPC SRAM
and not the next level U-Boot loaded on DDR.

Reviewed-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Aneesh Bansal <aneesh.bansal@nxp.com>
Signed-off-by: Sumit Garg <sumit.garg@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-07-21 11:09:34 -07:00
Sumit Garg
8f01397ba7 powerpc/mpc85xx: SECURE BOOT- Enable chain of trust in SPL
As part of Chain of Trust for Secure boot, the SPL U-Boot will validate
the next level U-boot image. Add a new function spl_validate_uboot to
perform the validation.

Enable hardware crypto operations in SPL using SEC block.
In case of Secure Boot, PAMU is not bypassed. For allowing SEC block
access to CPC configured as SRAM, configure PAMU.

Reviewed-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: Aneesh Bansal <aneesh.bansal@nxp.com>
Signed-off-by: Sumit Garg <sumit.garg@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-07-21 11:09:23 -07:00
Hou Zhiqiang
0e68a3694d ARMv8/ls1043ardb: Integrate FSL PPA
The PPA use PSCI to make secondary cores bootup. So when PPA was
enabled, add the CONFIG_ARMV8_PSCI to identify the SMP boot-method
between PSCI and spin-table.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-07-19 11:34:26 -07:00
York Sun
e61a7534e3 armv8: Move secure_ram variable out of generic global data
Secure_ram variable was put in generic global data. But only ARMv8
uses this variable. Move it to ARM specific data structure.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-07-15 09:01:43 -07:00
Vanessa Maegima
d6b0c46818 mx6sxsabresd: Avoid hardcoded RAM size
Instead of passing the total RAM size via PHYS_SDRAM_SIZE option,
we should better use imx_ddr_size() function, which automatically
determines the RAM size.

Signed-off-by: Vanessa Maegima <vanessa.maegima@nxp.com>
2016-07-12 17:58:49 +02:00
Vanessa Maegima
432a8a5547 mx6sxsabreauto: Avoid hardcoded RAM size
Instead of passing the total RAM size via PHYS_SDRAM_SIZE option,
we should better use imx_ddr_size() function, which automatically
determines the RAM size.

Signed-off-by: Vanessa Maegima <vanessa.maegima@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-07-12 17:58:49 +02:00
Vanessa Maegima
8259e9c9ad mx6slevk: Avoid hardcoded RAM size
Instead of passing the total RAM size via PHYS_SDRAM_SIZE option,
we should better use imx_ddr_size() function, which automatically
determines the RAM size.

Signed-off-by: Vanessa Maegima <vanessa.maegima@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-07-12 17:58:49 +02:00
Vanessa Maegima
369012e7e9 mx6qsabreauto: Avoid hardcoded RAM size
Instead of passing the total RAM size via PHYS_SDRAM_SIZE option,
we should better use imx_ddr_size() function, which automatically
determines the RAM size.

Signed-off-by: Vanessa Maegima <vanessa.maegima@nxp.com>
Acked-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-07-12 17:58:48 +02:00
Qianyu Gong
581ff00bf7 armv8: ls1043aqds: use configurable clock
Get the clocks from FPGA through I2C, if IFC is disabled.

Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-28 12:08:43 -07:00
Qianyu Gong
a2fd238e49 armv8: ls1043aqds: fix to get boot device info from FPGA
The LBMAP switches on the board will tell which boot device is used.
Only QSPI boot is supported if the boot device is IFCCard.

Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-24 08:33:34 -07:00
Tom Rini
a10a31ec91 Merge branch 'master' of git://git.denx.de/u-boot-usb
Signed-off-by: Tom Rini <trini@konsulko.com>

Conflicts:
	arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
2016-06-18 23:46:21 -04:00
Tom Rini
2372b00129 Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2016-06-18 23:44:22 -04:00
Peng Fan
0d7cdc2abf imx: mx6ulevk: change QSPI PAD DSE to 120ohm
The current pad DSE for QSPI is 60ohm. This setting cause
too strong drive to clock and data signals. Need to change
the DSE to 120ohm for better signal quality.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-06-18 10:29:18 +02:00
Peng Fan
288683280f imx6ulevk: fix LCD_nPWREN setting
Q901 is PMOS, LCD_nPWREN should be at low voltage then output is 3V3.
If LCD_nPWREN is high, output is 2.4V which is not correct.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-06-18 10:29:18 +02:00
Peng Fan
85801579e1 imx6ulevk: fix 74LV OE usage
Fix 74LV OE gpio index. gpio index is wrong,
so gpio output will not have effect, since we
use wrong GPIO5_IO18, but not correct GPIO5_IO8.

And at the end of the initialization of 74lv init, should
keep OE voltage level at LOW to make 74lv output the correct
voltage.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-06-18 10:29:18 +02:00
Ye Li
0fcb85cc0c mx7dsabresd: Fix LCD_PWR_EN output setting
LCD_PWR_EN controls the G pin of Q13 PMOS which needs low voltage to connect
D to S for outputting LCD 3.3V. If LCD_PWR_EN is high, we measured the LCD 3v3
is actually 1.2V.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-06-18 10:29:18 +02:00
Marco Franchi
6c51a3644e mx6sabresd: Allow LVDS backlight to be functional after a kernel reboot
Currently the LVDS backlight does not work in U-Boot after a “reboot” comand
in the kernel.

This problem occurs because the kernel uses this pin in PWM mode and U-Boot
does not configure the backlight pin as GPIO functionality.

So fix the problem by explicitly configuring the backlight pin as GPIO in
U-Boot.

Signed-off-by: Marco Franchi <marco.franchi@nxp.com>
Acked-by: Stefano Babic <sbabic@denx.de>
Tested-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-06-18 10:25:54 +02:00
Stefano Babic
dc557e9a1f Merge branch 'master' of git://git.denx.de/u-boot
Signed-off-by: Stefano Babic <sbabic@denx.de>
2016-06-18 10:25:13 +02:00
Sriram Dash
ef53b8c4ce usb: xhci: fsl: Add workaround for USB erratum A008751
This patch is doing the following:
1. Implementing the errata for LS2080.
2. Adding fixup for fdt for LS2080.

Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
2016-06-13 15:16:46 +02:00
Eddy Petrișor
9702ec00e9 armv8: s32v234: Introduce basic support for s32v234evb
Add initial support for NXP's S32V234 SoC and S32V234EVB board.

The S32V230 family is designed to support computation-intensive applications
for image processing. The S32V234, as part of the S32V230 family, is a
high-performance automotive processor designed to support safe
computation-intensive applications in the area of vision and sensor fusion.

Code originally writen by:
Original-signed-off-by: Stoica Cosmin-Stefan <cosminstefan.stoica@freescale.com>
Original-signed-off-by: Mihaela Martinas <Mihaela.Martinas@freescale.com>
Original-signed-off-by: Eddy Petrișor <eddy.petrisor@gmail.com>

Signed-off-by: Eddy Petrișor <eddy.petrisor@nxp.com>
2016-06-13 08:56:35 -04:00
Tom Rini
3fc304b8d7 Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2016-06-12 12:51:34 -04:00
Yuan Yao
a646f66981 armv8: ls2080aqds: Enable QSPI boot support
This patch adds QSPI boot support for LS2080AQDS board.
The QSPI boot image need to be programmed into the QSPI flash
first. Then we can switch to booting from QSPI memory space.

Signed-off-by: Yuan Yao <yao.yuan@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-10 13:45:01 -07:00
Yuan Yao
453418f2d2 armv8: ls2080aqds: Config QSPI pin mux via FPGA in NAND boot
Signed-off-by: Yuan Yao <yao.yuan@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-10 13:45:00 -07:00
Yuan Yao
8c77ef8540 armv8: ls2080aqds: disable IFC NOR & QIXIS when QSPI enable
When QSPI is enabled, NOR flash and QIXIS can't be accessed
through IFC due to pin mux. Enable I2C QIXIS access and I2C
early init to read the sysclk and ddrclk.

Signed-off-by: Yuan Yao <yao.yuan@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-10 13:44:59 -07:00
Yuan Yao
916d9f099e armv8: ls2080aqds: Select QSPI CLK div via SCFG
QSPI module output SCLK divisor value is configured through SCFG.

Signed-off-by: Yuan Yao <yao.yuan@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-10 13:44:59 -07:00
Pratiyush Mohan Srivastava
30677deefd board: ls2080a: Add "mcinitcmd" env for MC & DPL deployment
Environment variable mcinitcmd is defined to initiate MC and DPL
deployment from the location where it is stored (NOR, NAND, SD, SATA,
USB) during booting. If this variable is not defined then macro
MC_BOOT_ENV_VAR will be null and MC will not be booted and DPL will
not be applied during U-boot booting.

Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-10 13:44:58 -07:00
Tom Rini
cc749523ae Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx 2016-06-04 12:12:26 -04:00
Tom Rini
715b3a9b24 Merge git://git.denx.de/u-boot-nand-flash 2016-06-04 08:49:47 -04:00
Robert P. J. Day
23d4e5ba49 freescale: Tweak various Makefiles to remove redundancy, fix aesthetics
No intended functional change, just remove redundancies in some
Makefiles, and make whitespace aesthetics uniform.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-03 22:14:27 -07:00
Shengzhou Liu
5349928277 board/freescale: Use unified setup_ddr_tlbs for spl boot and non-spl boot
We should use unified setup_ddr_tlbs() for spl boot and non-spl boot
to make sure 'M' bit is set for DDR TLB to maintain cache coherence.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-03 22:12:54 -07:00
Sumit Garg
ed4708aaea powerpc/board: SPL: Enable malloc flag in global data.
For malloc to work in SPL framework enable GD_FLG_FULL_MALLOC_INIT
flag in global data after allocating memory using mem_malloc_init.

Signed-off-by: Sumit Garg <sumit.garg@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-03 22:12:06 -07:00
Scott Wood
17cb4b8f32 mtd: nand: Add+use mtd_to/from_nand and nand_get/set_controller_data
These functions are part of the Linux 4.6 sync.  They are being added
before the main sync patch in order to make it easier to address the
issue across all NAND drivers (many/most of which do not closely track
their Linux counterparts) separately from other merge issues.

Signed-off-by: Scott Wood <oss@buserror.net>
2016-06-03 20:27:48 -05:00
Prabhakar Kushwaha
ff78aa2ba1 armv8: ls1012a: Add support of ls1012afrdm board
QorIQ LS1012A FREEDOM (LS1012AFRDM) is a high-performance
development platform, with a complete debugging environment.
The LS1012AFRDM board supports the QorIQ LS1012A processor and is
optimized to support the high-bandwidth DDR3L memory and
a full complement of high-speed SerDes ports.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com>
Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-03 14:12:51 -07:00
Prabhakar Kushwaha
3b6e3898c2 armv8: ls1012a: Add support of ls1012ardb board
QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance
development platform, with a complete debugging environment.
The LS1012ARDB board supports the QorIQ LS1012A processor and is
optimized to support the high-bandwidth DDR3L memory and
a full complement of high-speed SerDes ports.

Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-03 14:12:51 -07:00
Prabhakar Kushwaha
9d044fcb8c armv8: ls1012a: Add support of ls1012aqds board
QorIQ LS1012A Development System (LS1012AQDS) is a high-performance
development platform, with a complete debugging environment.
The LS1012AQDS board supports the QorIQ LS1012A processor and is
optimized to support the high-bandwidth DDR3L memory and
a full complement of high-speed SerDes ports.

Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com>
Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-03 14:12:51 -07:00
Abhimanyu Saini
16dacb26a5 board: freescale: common: Add flag for LBMAP brdcfg reg offset
Add QIXIS_LBMAP_BRDCFG_REG to the save offset of LBMAP
configuration register instead of hardcoding it in
set_lbmap() function.

Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-03 14:12:51 -07:00
Abhimanyu Saini
3faaa24b11 board: freescale: common: Conditionally compile IFC QXIS func
Check if qixis supports memory-mapped read/write
before compiling IFC based qixis read/write functions.

Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-03 14:12:50 -07:00
Prabhakar Kushwaha
ddd8a08052 armv8: fsl-layerscape: Organize SoC overview at common location
SoC overviews are getting repeated across board folders.
So, Organize SoC overview at common location i.e. fsl-layerscape/doc

Also move README.lsch2 and README.lsch3 in same folder.

Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-03 14:12:50 -07:00
Shaohui Xie
3e06ba8f25 armv8: ls1043aqds: fix usb PWRFAULT setting
SCFG_USBPWRFAULT_DEDICATED instead of SCFG_USBPWRFAULT_SHARED should
be used for USB 3 & 2.

Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-03 14:12:49 -07:00
York Sun
931e8751af board: ls2080ardb: qds: Fix compiling issue when FSL_MC_ENET not defined
U-Boot should continue to work without management complex (MC).
Fix compiling errors and warnings.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-06-03 14:12:48 -07:00
Vincent Siles
c4f97b1f53 board: ls102xa: Fix ICID setup
LS102A ref manual dictates that ICID have to be written to the MSB
of the ICID register, not to the LSB.

Signed-off-by: Vincent Siles <vincent.siles@provenrun.com>
2016-06-03 14:12:06 -07:00
Shengzhou Liu
e04f9d0c2f board/freescale: Update ddr clk_adjust
This patch updates clk_adjust to actual value for boards with
T-series and LS-series SoCs to match the setting of clk_adjust
in latest ddr driver.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-03 14:06:57 -07:00
Sebastien Bourdelin
cb82c38eff cosmetic: mx6slevk: Minor coding-style fix
Fix the brace indentation in board_mmc_init().

Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
2016-05-31 17:37:44 +02:00
Peng Fan
73f366bb5b imx: mx6qsabreauto: drop duplicated net phy configuration
In 'commit d584c68ce0f5bf2f430ccfb2ba00bd506206fb91',
ar8031 is changed to use ar8035_config. ar8035_config
actually does the same thing as mx6_rgmii_rework, so
drop mx6_rgmii_rework and board_phy_config.

Signed-off-by: Peng Fan <van.freenix@gmail.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2016-05-31 17:36:47 +02:00
Robert P. J. Day
7ffe3cd62e Delete tests of CONFIG_OF_LIBFDT when testing CONFIG_OF_BOARD_SETUP
Since CONFIG_OF_BOARD_SETUP depends on CONFIG_OF_LIBFDT:

  config OF_BOARD_SETUP
          bool "Set up board-specific details in device tree before boot"
          depends on OF_LIBFDT
          ...

remove superfluous tests of CONFIG_OF_LIBFDT when testing for
CONFIG_OF_BOARD_SETUP.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
[trini: Typo fix: s/ifdefi/ifdef/]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-05-27 15:41:16 -04:00
Tom Rini
826d06dbdd Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx 2016-05-25 07:19:31 -04:00
Ying Zhang
d1fc8ed485 powerpc:t4240rdb: Disable the non-existent ethernet ports on T4240RDB
Disable the non-existent ethernet ports on T4240RDB:FM1_DTSEC5,
FM1_DTSEC6, FM2_DTSEC5 and FM2_DTSEC6.

Signed-off-by: Ying Zhang <ying.zhang22455@nxp.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-05-24 17:11:03 -07:00
Peng Fan
83e1394242 board: mx6sabresd/auto: use simpler runtime cpu dection macros
Use simpler runtime cpu dection macros.

Signed-off-by: Peng Fan <van.freenix@gmail.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2016-05-24 14:59:57 +02:00
York Sun
9272611e99 powerpc/t208xrdb: Update MAINTAINERS file
Signed-off-by: York Sun <york.sun@nxp.com>
CC: Shengzhou Liu <Shengzhou.Liu@nxp.com>
2016-05-19 10:47:12 -07:00
York Sun
a4d3074209 powerpc/t208xqds: Update MAINTAINERS file
Signed-off-by: York Sun <york.sun@nxp.com>
CC: Shengzhou Liu <Shengzhou.Liu@nxp.com>
2016-05-19 10:47:11 -07:00
Shaohui Xie
7942550a14 armv8: ls1043ardb: invert irq pin polarity for AQR105 PHY
To use AQR105 PHY's interrupt, we need to invert the IRQ pin polarity
by setting relative bit in SCFG_INTPCR register, because AQR105
interrupt is low active but GIC accepts high active.

Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-05-18 08:51:47 -07:00
Alex Porosanu
404bf4547e arch/arm, arch/powerpc: add # of SEC engines on the SOC
Some SOCs, specifically the ones in the C29x familiy can have
multiple security engines. This patch adds a system configuration
define which indicates the maximum number of SEC engines that
can be found on a SoC.

Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-05-18 08:51:46 -07:00
Qianyu Gong
9718650f8c armv8: ls1043ardb: fix types of variables
Using u16 for cfg_rcw_src and u8 for sd1refclk_sel is enough.

Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-05-18 08:51:45 -07:00
Qianyu Gong
ec93abe6f7 armv8: ls1043a: remove redundant code in board files
gd->env_addr will be initialized in env_init() in
common/env_nowhere.c if CONFIG_ENV_IS_NOWHERE is defined.
So no need to do it again.

Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-05-18 08:51:45 -07:00
Qianyu Gong
869bf86811 armv8/ls1043ardb: fix the limitation of using 'cpld reset'
The current 'cpld reset' will just write global_rst register
but couldn't switch to NOR boot if the board's switches are
for NAND/SD boot. So need to write rcw source registers for
NOR boot as well.

Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-05-18 08:51:44 -07:00
Vincent Siles
12cbf20d78 arm: uniform usage of u32 in ls102x caam config
Mix usage of uint32_t and u32 fixed in favor of u32.

Signed-off-by: Vincent Siles <vincent.siles@provenrun.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-05-18 08:51:44 -07:00
Vincent Siles
15b96ad831 arm: Fix SCFG ICID reg addresses
On the LS102x boards, in order to initialize the ICID values of
masters, the dev_stream_id array holds absolute offsets from the
base of SCFG.

In ls102xa_config_ssmu_stream_id, the base pointer is cast to
uint32_t * before adding the offset, leading to an invalid address.
Casting it to void * solves the issue.

Signed-off-by: Vincent Siles <vincent.siles@provenrun.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-05-18 08:51:44 -07:00
Prabhakar Kushwaha
6f3819fe30 armv8: ls2080a: Update MAINTAINERS file
Update MAINTAINERS file for ls2080aqds and ls2080ardb platforms.

Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-05-17 09:27:15 -07:00
Shengzhou Liu
aa7a2226b5 armv8/ls2080ardb: Update DDR timing to support more UDIMMs
Optimize DDR timing for good margins to support new Transcend
and Apacer DDR4 UDIMM besides current Micron UDIMM.

Verified 1333MT/s, 1600MT/s, 1866MT/s, 2133MT/s rate with
following UDIMM on LS2080ARDB.
 - Micron UDIMM: MTA18ASF1G72AZ-2G1A1Z
 - Apacer UDIMM: 78.C1GM4.AF10B
 - Transcend UDIMM: TS1GLH72V1H

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-05-17 09:26:59 -07:00
Shengzhou Liu
074596c0b5 armv8/ls1043: Add workaround for DDR erratum A-008850
Barrier transactions from CCI400 need to be disabled till
the DDR is configured, otherwise it may lead to system hang.
The patch adds workaround to fix the erratum.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-05-17 09:26:19 -07:00
Robert P. J. Day
1cc0a9f496 Fix various typos, scattered over the code.
Spelling corrections for (among other things):

* environment
* override
* variable
* ftd (should be "fdt", for flattened device tree)
* embedded
* FTDI
* emulation
* controller
2016-05-05 21:39:26 -04:00
Tom Rini
814013253f Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2016-04-13 07:19:50 -04:00
York Sun
3c1d218a1d armv8: LS2080A: Consolidate LS2080A and LS2085A
LS2080A is the primary SoC, and LS2085A is a personality with AIOP
and DPAA DDR. The RDB and QDS boards support both personality. By
detecting the SVR at runtime, a single image per board can support
both SoCs. It gives users flexibility to swtich SoC without the need
to reprogram the board.

Signed-off-by: York Sun <york.sun@nxp.com>
CC: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2016-04-06 10:26:46 -07:00
Shaohui Xie
ce96ba4b84 armv8: ls1043aqds: make sure fixed-link property is big endian
When setting fixed-link property to DTS, the values should be converted
with using cpu_to_fdt32 so that to have correct value on little endian
Soc.

Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-04-06 08:34:55 -07:00
Tom Rini
59c9e9b408 mx6slevk: imximage.cfg: update to fix tINIT3 and tIH-CA violations
Having had a similar board and memory part under logic analyzer, a
tINIT3 violation was measured.  The fix was involved keeping tXPR and
SDE_to_RST at the power-on defaults and setting RST_to_CKE the JEDEC
value for LPDDR2.  There was also a tIH-CA violation and this was
resolved by writing the default value in rather than what the script
here uses.

Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-04-03 19:18:45 +02:00
Tom Rini
2249b5a55a mx6qarm2: imximage_mx6dl.cfg update to fix tINIT3 violation
Having had a similar board and memory part under logic analyzer, a
tINIT3 violation was measured.  The fix was involved keeping tXPR and
SDE_to_RST at the power-on defaults and setting RST_to_CKE the JEDEC
value for LPDDR2.

Cc: Jason Liu <jason.hui.liu@nxp.com>
Cc: Ye Li <ye.li@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-03 19:18:20 +02:00
Fabio Estevam
30ba8eb0d3 mx6sabresd: Remove unneeded enable_lvds() function
enable_lvds() function only set bits IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT and
IOMUXC_GPR2_DATA_WIDTH_CH1_18BIT, but these bits were already set
previously inside setup_display().

We can safely remove enable_lvds() then.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-04-03 19:14:43 +02:00
Mateusz Kulikowski
e162c6b1a7 usb: Rename ehci-fsl.h to ehci-ci.h
Most of ehci-fsl header describe USB controller
designed by Chipidea and used by various SoC vendors.

This patch renames it to a generic header: ehci-ci.h
Contents of file are not changed (so it contains several
references to freescale SoCs).

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Acked-by: Marek Vasut <marex@denx.de>
Tested-by: Simon Glass <sjg@chromium.org>
2016-04-01 17:18:10 -04:00
Rai Harninder
ed2530d096 armv8/ls2080ardb: Enable VID support
This patch enable VID support for ls2080ardb platform.
It uses the common VID driver.

Signed-off-by: Rai Harninder <harninder.rai@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-03-29 08:46:24 -07:00
Saksham Jain
85bb389654 SECURE BOOT: Change fsl_secboot_validate func to pass image addr
Use a pointer to pass image address to fsl_secboot_validate(),
instead of using environmental variable "img_addr".

Signed-off-by: Aneesh Bansal <aneesh.bansal@nxp.com>
Signed-off-by: Saksham Jain <saksham.jain@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-03-29 08:46:23 -07:00
Saksham Jain
c4666cf695 SECURE BOOT: Halt execution when secure boot fail
In case of fatal failure during secure boot execution (e.g. header
not found), reset is asserted to stop execution. If the RESET_REQ
is not tied to HRESET, this allows the execution to continue.

Add esbh_halt() after the reset to make sure execution stops.

Signed-off-by: Aneesh Bansal <aneesh.bansal@nxp.com>
Signed-off-by: Saksham Jain <saksham.jain@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-03-29 08:46:23 -07:00
Saksham Jain
fcfdb6d580 armv8: ls2080rdb: ls2080qds: Add secure boot support
Sec_init has been called at the beginning to initialize SEC Block
(CAAM) which is used by secure boot validation later for both ls2080a
qds and rdb. 64-bit address in ESBC Header has been enabled. Secure
boot defconfigs are created for boards (NOR boot).

Signed-off-by: Saksham Jain <saksham.jain@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-03-29 08:46:20 -07:00
Saksham Jain
fd6dbc98a7 armv8: fsl-lsch3: Add new header for secure boot
For secure boot, a header is used to identify key table, signature
and image address. A new header structure is added for lsch3.

Currently key extension (IE) feature is not supported. Single key
feature is not supported. Keys must be in table format. Hence, SRK
(key table) must be present. Max key number has increase from 4 to
8. The 8th key is irrevocable. A new barker Code is used.

Signed-off-by: Aneesh Bansal <aneesh.bansal@nxp.com>
Signed-off-by: Saksham Jain <saksham.jain@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-03-29 08:46:20 -07:00
Fabio Estevam
779594d335 mx6sabresd: Use VESA 1024x768 timings
VESA 1024x768 results in much more accurate timings.

Based on the patch from Soeren Moch for the tbs2910 board.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-03-25 14:05:24 +01:00
Stuart Yoder
e91f1deca5 armv8: ls2080a: Update fdt path for fsl-mc node
The fsl-mc node has been moved under /soc, so update
the path references accordingly.  Backwards compatibility
is retained for /fsl-mc.

Delete backwards compatibility for the completely obsolete
/fsl,dprc@0.

Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-03-24 11:43:31 -07:00
Wenbin Song
ec44289db5 armv8/ls1043aqds: Return i2c mux to default chennel
Return i2c mux to the default channel after accessing retimer.

Signed-off-by: Wenbin Song <wenbin.song@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-03-21 12:42:15 -07:00
Wenbin Song
1be8d10be4 freescale: vid: Return i2c mux to default channel
IR chip is on one of the channels on multiplexed I2C-bus.
Reset to default channel after accessing.

Signed-off-by: Wenbin Song <wenbin.song@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-03-21 12:42:15 -07:00
Prabhakar Kushwaha
0f4b82a555 armv8: ls2085a: Remove phy configuration from QDS and RDB
As phy_connect and phy_config are being called from DPAA2 driver.
Remove calling of mentioned function from board file.

Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-03-21 12:42:14 -07:00
Shaohui Xie
abc7d0f75c armv8: ls2080ardb: invert irq pins polarity for AQR405 PHY
To use AQR405 PHY's interrupt, we need to invert the relative IRQ pins
polarity by setting IRQCR register, because AQR405 interrupt is low
active but GIC accepts high active.

Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-03-21 12:42:10 -07:00
Simon Glass
73223f0e1b Kconfig: Move CONFIG_FIT and related options to Kconfig
There are already two FIT options in Kconfig but the CONFIG options are
still in the header files. We need to do a proper move to fix this.

Move these options to Kconfig and tidy up board configuration:

   CONFIG_FIT
   CONFIG_OF_BOARD_SETUP
   CONFIG_OF_SYSTEM_SETUP
   CONFIG_FIT_SIGNATURE
   CONFIG_FIT_BEST_MATCH
   CONFIG_FIT_VERBOSE
   CONFIG_OF_STDOUT_VIA_ALIAS
   CONFIG_RSA

Unfortunately the first one is a little complicated. We need to make sure
this option is not enabled in SPL by this change. Also this option is
enabled automatically in the host builds by defining CONFIG_FIT in the
image.h file. To solve this, add a new IMAGE_USE_FIT #define which can
be used in files that are built on the host but must also build for U-Boot
and SPL.

Note: Masahiro's moveconfig.py script is amazing.

Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Add microblaze change, various configs/ re-applies]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-03-14 19:18:07 -04:00
Fabio Estevam
ae765f3a82 mx6slevk: Fix the power up of the Ethernet PHY
GPIO4_21 is the LAN8720 power pin, not the LAN8720 reset pin.

Fix that, so that we can have Ethernet functional again.

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-03-13 09:50:02 -04:00
Fabio Estevam
9feec162af mx6qarm2: Update maintainer's emails
Use the new NXP emails.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-03-02 14:49:13 +01:00
Fabio Estevam
047cc75df6 MAINTAINERS: Update Peng Fan's email address
Use Peng Fan's new NXP email address in MAINTAINERS files.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
2016-03-02 14:48:52 +01:00
Alison Wang
a08b1921b4 armv7: ls102xa: Move smmu and stream id initialization into the common soc code
The initialization for smmu and stream id is moved into the common soc
code.

Signed-off-by: Alison Wang <alison.wang@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-02-24 08:51:15 -08:00
Zhao Qiang
a12a0ef89e board: ls1043ardb: Modify pin-muxing code for USB and QE-HDLC
QE-HDLC and USB multi-use the pins, modify the pin-muxing code
for them, when set "hwconfig=qe-hdlc" in uboot, assign the pins
to QE-HDLC, if not, assgin it to USB

Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-02-24 08:51:15 -08:00
Zhao Qiang
110171dcef board: ls1043rdb: Move USB muxing config to config_board_mux
Pin-muxing code should be in config_board_mux, move USB muxing
config to config_board_mux.

Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-02-24 08:51:15 -08:00
Zhao Qiang
d3e6d30cef board: ls1043ardb: Add micro QE support for ls1043ardb
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-02-24 08:51:14 -08:00
Qianyu Gong
5a7c40bea6 armv8/ls1043aqds: Add USB support for ls1043aqds
Add USB XHCI support for ls1043qds board.

Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-02-24 08:51:14 -08:00
Qianyu Gong
2459afb1a7 qe: move drivers/qe/qe.h to include/fsl_qe.h
As the QE firmware struct is shared with Fman, move the header file
out of drivers/qe/.

Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-02-24 08:51:13 -08:00
Alison Wang
70097027d2 arm: ls1021a: Add QSPI or IFC support in SD boot for LS1021AQDS board
As QSPI and IFC are pin-multiplexed on LS1021A, only IFC is supported
in SD boot now. For the customer's demand, QSPI needs to be supported
in SD boot too.

This patch adds QSPI or IFC support in SD boot according to the
corresponding defconfig. For detail, ls1021aqds_sdcard_ifc_defconfig
is used to support IFC in SD boot and ls1021aqds_sdcard_qspi_defconfig
is used to support QSPI in SD boot.

Signed-off-by: Alison Wang <alison.wang@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-02-24 08:40:56 -08:00
Tom Rini
595af9db24 Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2016-02-21 07:56:16 -05:00
Fabio Estevam
2b8e8d2671 mx7dsabresd: Make 'ums' command functional
When running the 'ums' command we get:

=> ums 0 mmc 0
UMS: disk start sector: 0x0, count: 0xe18000
g_dnl_register: failed!, error: -22
ERROR: g_dnl_register failed
at common/cmd_usb_mass_storage.c:107/do_usb_mass_storage()

Fix this by initializing USB OTG1 port as USB device mode instead of host.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-02-21 11:13:27 +01:00
Fabio Estevam
88e826be45 mx7dsabresd: Use Adrian's NXP email address
Use the new NXP email address for the board maintainer.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-02-21 11:12:32 +01:00
Bin Meng
a187559e3d Use correct spelling of "U-Boot"
Correct spelling of "U-Boot" shall be used in all written text
(documentation, comments in source files etc.).

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
2016-02-06 12:00:59 +01:00
Peng Fan
fb0d042814 imx: mx6: implement board_mmc_get_env_dev
Implement board_mmc_get_env_dev for the boards.

Following is examples:
SD1/SD2/SD3: return devno;
SD2/SD3: return devno - 1;
SD2/SD4: if (devno == 2), return dev - 2; return dev - 1;

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2016-02-04 10:13:53 +01:00
Peng Fan
62d8cce9f3 imx: mx7dsabresd: move mmc_get_env_devno to soc code
Move mmc_get_env_devno to soc.c and rename to mmc_get_env_dev to
match the one in common/env_mmc.c.
Introduce a weak function board_mmc_get_env_dev. Different
boards can implement this according to sdhc controller which
is used by the board.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2016-02-04 10:13:45 +01:00
Ye Li
85eb095216 imx: mx6sxsabresd: Add MCIMX28LCD display support
The i.MX6SX SABRESD board supports MCIMX28LCD (800x480x24) at LCDIF1
port, enable this display feature by adding relevant BSP codes
and configurations.

Signed-off-by: Ye Li <ye.li@nxp.com>
2016-02-02 21:27:15 +01:00
Ye Li
214c3f0f99 imx: MX6DQ{P}/DL:SABRESD Fix bmode eMMC failure
The BOOTCFG value used by bmode for SABRESD eMMC boot are actually for SD card.
Fixed the value to correct one.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-02-02 21:22:04 +01:00
Fabio Estevam
529a671279 mx6slevk: Fix the reset delay for the the LAN8720 PHY
Since commit 59370f3fcd ("net: phy: delay only if reset handler is
registered") Ethernet is no longer functional.

This commit does not have an issue in itself, but it revelead a problem
with the Ethernet initialization.

According to the LAN8720 datasheet tpurstd (time that reset line should
stay asserted) is 25ms.

So do as suggested in order to have Ethernet working again.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-02-02 21:18:44 +01:00
Ye Li
cf94a3427a imx: mx6sxsabreauto: Add support for mx6sx SABREAUTO board
Initial version for mx6sx SABREAUTO board support with features:
PMIC, QSPI, NAND flash, SD/MMC, USB, Ethernet, I2C, IO Expander.

Signed-off-by: Ye Li <ye.li@nxp.com>
2016-02-02 21:04:21 +01:00
Tom Rini
82d72a1b99 Merge branch 'master' of git://git.denx.de/u-boot-net 2016-01-28 18:42:10 -05:00
Bin Meng
9ccb309651 arm: ls1021atwr: Do not wrap pci_eth_init() with CONFIG_TSEC_ENET
The call to pci_eth_init() should not be wrapped with CONFIG_TSEC_ENET.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-28 12:22:44 -06:00
Bin Meng
c712df1d1d powerpc: p1010rdb: Do not wrap pci_eth_init() with CONFIG_TSEC_ENET
The call to pci_eth_init() should not be wrapped with CONFIG_TSEC_ENET.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-28 12:22:41 -06:00
Bin Meng
1adc09544f powerpc: mpc8548cds: Do not wrap pci_eth_init() with CONFIG_TSEC_ENET
The call to pci_eth_init() should not be wrapped with CONFIG_TSEC_ENET.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-28 12:22:37 -06:00
Bin Meng
4521ae9dca powerpc: mpc8572ds: Do not wrap pci_eth_init() with CONFIG_TSEC_ENET
The call to pci_eth_init() should not be wrapped with CONFIG_TSEC_ENET.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-28 12:22:33 -06:00
Bin Meng
98ae83b5e1 powerpc: c29xpcie: Do not wrap pci_eth_init() with CONFIG_TSEC_ENET
The call to pci_eth_init() should not be wrapped with CONFIG_TSEC_ENET.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-28 12:22:30 -06:00
Bin Meng
89c97842db powerpc: bsc9132qds: Do not wrap pci_eth_init() with CONFIG_TSEC_ENET
The call to pci_eth_init() should not be wrapped with CONFIG_TSEC_ENET.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-28 12:22:27 -06:00
Tom Rini
cd85bec36d Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq 2016-01-27 15:05:36 -05:00
Qianyu Gong
b0f20caf65 armv8/ls1043aqds: add QSPI boot support
Enable the U-Boot Driver Model(DM) to use the Freescale QSPI driver.

Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-01-27 08:29:09 -08:00
Gong Qianyu
166ef1e90c armv8/ls1043aqds: add QSPI support in SD boot
QSPI and IFC are pin-multiplexed on LS1043A. So we use
ls1043aqds_sdcard_ifc_defconfig to support IFC in SD boot and
ls1043aqds_sdcard_qspi_defconfig to support QSPI in SD boot.

Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-01-27 08:28:55 -08:00
Shaohui Xie
8c35cc3b7e armv8/ls1043aqds: Select lpuart pins of various muxes
Set Board Configuration Register to select the lpuart pins of various
muxes.

Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-01-27 08:13:12 -08:00
Aneesh Bansal
856b284617 secure_boot: change error handler for esbc_validate
In case of error while executing esbc_validate command, SNVS
transition and issue of reset is required only for secure-boot.
If boot mode is non-secure, this is not required.

Similarly, esbc_halt command which puts the core in Spin Loop
is applicable only for Secure Boot.

Signed-off-by: Aneesh Bansal <aneesh.bansal@nxp.com>
Acked-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-01-27 08:13:03 -08:00
Aneesh Bansal
d041288586 secure_boot: enable chain of trust for ARM platforms
Chain of Trust is enabled for ARM platforms (LS1021 and LS1043).
In board_late_init(), fsl_setenv_chain_of_trust() is called which
will perform the following:
- If boot mode is non-secure, return (No Change)
- If boot mode is secure, set the following environmet variables:
   bootdelay = 0 (To disable Boot Prompt)
   bootcmd = CONFIG_CHAIN_BOOT_CMD (Validate and execute Boot script)

Signed-off-by: Aneesh Bansal <aneesh.bansal@nxp.com>
Acked-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-01-27 08:12:49 -08:00
Aneesh Bansal
0a6b2714ad secure_boot: create function to determine boot mode
A function is created to detrmine if the boot mode is secure
or non-secure for differnt SoC's.

Signed-off-by: Aneesh Bansal <aneesh.bansal@nxp.com>
Acked-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-01-27 08:12:42 -08:00
Tom Rini
d82477748d Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx 2016-01-25 16:45:00 -05:00
Ying Zhang
2f66a828f7 powerpc/board/t4240rdb: Enable VID support
The fuse status register provides the values from on-chip
voltage ID efuses programmed at the factory. These values
define the voltage requirements for the chip. u-boot reads
FUSESR and translates the values into the appropriate
commands to set the voltage output value of an external
voltage regulator.

Signed-off-by: Ying Zhang <b40530@freescale.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-01-25 12:38:05 -08:00
Ying Zhang
cabe4d2f19 board/freescale/common: Check IR chip mode for VID support
IR chip on all the boards are required to be used in Intel mode
to support VID. VDD will not be adjusted if IR chip is used in
other modes.

Signed-off-by: Ying Zhang <b40530@freescale.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-01-25 12:37:03 -08:00
Prabhakar Kushwaha
2c0d69713c powerpc: mpc85xx: Move set_liodns, setup_portals to common boot seq
Users migrating Freescale's PowerPC SoC U-Boot code to their custom
board, often overlook the need to execute set_liodns() and
setup_portals() being called by platform files.

So Move set_liodns() and setup_portals() to common u-boot boot
sequence

Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-01-25 12:13:31 -08:00
Aneesh Bansal
b055a0fd86 SECURE BOOT: support for validation of dynamic image
Some images to be validated are relocated to a dynamic
address at run time. So, these addresses cannot be known
befor hand while signing the images and creating the header
offline.
So, support is required to pass the image address to the
validate function as an argument.
If an address is provided to the function, the address
field in Header is not read and is treated as a reserved
field.

Signed-off-by: Saksham Jain <saksham@freescale.com>
Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com>
Acked-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-01-25 08:24:16 -08:00
Aneesh Bansal
6629261ddd SECURE BOOT: separate function created for signature
The code for image hash calculation, hash calculation from
RSA signature and comparison of hashes has been mobed to a
separate function.

Signed-off-by: Saksham Jain <saksham@freescale.com>
Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com>
Acked-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-01-25 08:24:16 -08:00
Aneesh Bansal
94ba5e4140 SECURE BOOT: separate functions for reading keys
Separate functions are created for reading and checking the
sanity of Public keys:
- read_validate_single_key
- read_validate_ie_tbl
- read_validate_srk_table

Signed-off-by: Saksham Jain <saksham@freescale.com>
Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com>
Acked-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-01-25 08:24:16 -08:00
Aneesh Bansal
bc71f926e3 SECURE BOOT: change prototype of fsl_secboot_validate function
The prototype and defination of function fsl_secboot_validate
has been changed to support calling this function from another
function within u-boot.
Only two aruments needed:
1) header address - Mandatory
2) SHA256 string - optional

Signed-off-by: Saksham Jain <saksham@freescale.com>
Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com>
Acked-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-01-25 08:24:16 -08:00
Gong Qianyu
98d9aa4013 freescale/qixis: Add support for booting from SD/QSPI
1.Use "qixis_reset sd" to boot from SD
2.Use "qixis_reset sd_qspi" to boot from SD with QSPI support
3.Use "qixis_reset qspi" to boot from QSPI flash

On some SoCs such as LS1021A and LS1043A, IFC and QSPI could be
pin-multiplexed. So the switches are different between SD boot with
IFC support and SD boot with QSPI support. The default booting from
SD is with IFC support.

Once QSPI is enabled(IFC disabled), only use I2C to access QIXIS.

Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-01-25 08:24:15 -08:00
Shaohui Xie
58e4ad1dee armv8/ls1043aqds: Add support for >2GB memory
This patch also exposes the complete DDR region(s) to Linux.

Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-01-25 08:24:14 -08:00
Peng Fan
6e1a41cd6a imx: mx7dsabresd: support nand
Add pinmux settings.
Add related macro definitions.
Nand pin conflicts with emmc, so if want to enable nand, need to do
hardware rework. After hardware rework, define CONFIG_NAND_MXS in
board header file.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2016-01-24 12:09:44 +01:00
Fabio Estevam
4897d950b7 mx25pdk: Remove lowlevel_init.S file
As the lowlevel_init function is empty we should better
remove this assembly file entirely and use a dummy C
function instead.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-01-24 11:52:45 +01:00
Masahiro Yamada
61a4392a36 m68k: M54418TWR: drop board/freescale/m54418twr/config.mk
The board/freescale/m54418twr/config.mk defined TEXT_BASE, which has
the same value as CONFIG_SYS_TEXT_BASE.  The TEXT_BASE is referenced
by two files:
 - arch/m68k/cpu/mcf5445x/start.S and include/
 - include/configs/M54418TWR.h

Replace the references with CONFIG_SYS_TEXT_BASE and delete
board/freescale/m54418twr/config.mk.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Angelo Dureghello <angelo at sysam.it>
2016-01-20 10:19:34 -05:00
Masahiro Yamada
c6e18144b6 m68k: move CONFIG_SYS_TEXT_BASE to defconfig files
For historical reason, CONFIG_SYS_TEXT_BASE has been specified
in various ways:

[1] by board/${VENDOR}/${BOARD}/config.mk

[2] by CONFIG_SYS_EXTRA_OPTIONS
    (This was "options" field of boards.cfg before Kconfig conversion)

[3] by include/configs/${BOARD}.h

[4] by configs/${BOARD}_defconfig

Most of M68K boards use either [1] or [2], both of which we want to
deprecate.  Switch them into [4], which is the newest way (Kconfig).

We still allow [3] too, because it is still used by many boards and
we expect much time for conversion.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Angelo Dureghello <angelo at sysam.it>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-01-20 10:19:34 -05:00
Tom Rini
5b8031ccb4 Add more SPDX-License-Identifier tags
In a number of places we had wordings of the GPL (or LGPL in a few
cases) license text that were split in such a way that it wasn't caught
previously.  Convert all of these to the correct SPDX-License-Identifier
tag.

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-01-19 08:31:21 -05:00
Ben Whitten
192bc6948b Fix GCC format-security errors and convert sprintfs.
With format-security errors turned on, GCC picks up the use of sprintf with
a format parameter not being a string literal.

Simple uses of sprintf are also converted to use strcpy.

Signed-off-by: Ben Whitten <ben.whitten@gmail.com>
Acked-by: Wolfgang Denk <wd@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-14 22:11:34 -05:00
Stephen Warren
7c4213f6a5 block: pass block dev not num to read/write/erase()
This will allow the implementation to make use of data in the block_dev
structure beyond the base device number. This will be useful so that eMMC
block devices can encompass the HW partition ID rather than treating this
out-of-band. Equally, the existence of the priv field is crying out for
this patch to exist.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-13 21:05:18 -05:00
Fabio Estevam
c5f18a0b69 MAINTAINERS/mailmap: Update my email address
Update my email address to the NXP account.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-01-11 11:22:43 -05:00
Tom Rini
b685c7348c Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2016-01-08 10:18:18 -05:00
York Sun
2f231025bc MAINTAINERS, .mailmap: Update my email address
Change from yorksun@freescale.com to york.sun@nxp.com.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-01-08 10:15:46 -05:00
Ye.Li
7ea191aa10 pfuze: Fix unsigned variable for less-than-zero comparison
According to the Coverity result, a unsigned int variable is used fo less-
than-zero comparison, the result is never true. Need to fix the variable
type to signed int.

Signed-off-by: Ye.Li <B37916@freescale.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2016-01-07 17:48:25 +01:00
Fabio Estevam
a307760ab4 mx6sabresd: Simplify the Ethernet PHY configuration
As per the AR8031 datasheet:

"For a reliable power on reset, suggest to keep asserting the reset
low long enough (10ms) to ensure the clock is stable and clock-to-reset
1ms requirement is satisfied."

So do as suggested and also add a 100us delay after deasserting the
reset line to guarantee that the PHY ID can be read correctly and the
Atheros 8031 PHY driver can be loaded automatically.

This results in a simpler code.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-07 17:47:12 +01:00
Miao Yan
18d3f46995 qemu-ppce500: pass 'range_id' around in pci_map_region
In pci_map_region(), pass 'range_id' to fdt_read_range(),
otherwise the same address will be mapped again in other
calls to pci_map_region()

Signed-off-by: Miao Yan <yammiaobest@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
2016-01-04 12:25:34 -05:00
Tom Rini
f1993ca066 Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2016-01-03 10:32:24 -05:00
Peng Fan
ccf4326bac imx: mx6qsabreauto: support lvds display
Move setup_display from board_early_init_f to board_init.
Add more clock settings.
Add blacklight iomux setting.
Add display_info_t info for the lvds screen.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
2016-01-03 16:03:14 +01:00
Mingkai Hu
1c5c6a5761 armv8/ls1043aqds/rcw: change core frequency to 1600MHz
Change RCW for SD boot and NAND boot.

Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-12-17 08:52:18 +08:00
Mingkai Hu
e2f019d783 armv8/ls1043ardb/rcw: change core frequency to 1600MHz
Change RCW for SD boot and NAND boot.

Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-12-17 08:52:18 +08:00
Aneesh Bansal
9711f52806 armv8/ls1043ardb: add SECURE BOOT target for NOR
LS1043ARDB Secure Boot Target from NOR has been added.
- Configs defined to enable esbc_validate.
- ESBC Address in header is made 64 bit.
- SMMU is re-configured in Bypass mode.

Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-12-15 08:57:35 +08:00
York Sun
c04921414c armv8: fsl-layerscale: Rewrite reserving memory for MC and debug server
MC and debug server are not board-specific. Move reserving memory to SoC
file, using the new board_reserve_ram_top function. Reduce debug server
memory by 2MB to make room for secure memory.

In the system with MC and debug server, the top of u-boot memory
is not the end of memory. PRAM is not used for this reservation.

Signed-off-by: York Sun <yorksun@freescale.com>
2015-12-15 08:57:33 +08:00
York Sun
c107c0c05c armv8: fsl-layerscape: Make DDR non secure in MMU tables
DDR has been set as secure in MMU tables. Non-secure master such
as SDHC DMA cannot access data correctly. Mixing secure and non-
secure MMU entries requirs the MMU tables themselves in secure
memory. This patch moves MMU tables into a secure DDR area.

Early MMU tables are changed to set DDR as non-secure. A new
table is added into final MMU tables so secure memory can have
2MB granuality.

gd->secure_ram tracks the location of this secure memory. For
ARMv8 SoCs, the RAM base is not zero and RAM is divided into several
banks. gd->secure_ram needs to be maintained before using. This
maintenance is board-specific, depending on the SoC and memory
bank of the secure memory falls into.

Signed-off-by: York Sun <yorksun@freescale.com>
2015-12-15 08:57:33 +08:00
Yao Yuan
7ba0261810 arm: ls1021a: merge SoC specific code in a separate file
Create a soc.c file to put the code for soc special settings.

Signed-off-by: Yuan Yao <yao.yuan@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-12-13 18:27:29 -08:00
Shaohui Xie
e994dddbbe armv8/ls1043ardb: Add support for >2GB memory
This patch also expose the complete DDR region(s) to Linux.

Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-12-13 18:27:29 -08:00
Shaohui Xie
1aaf3f9ae4 freescale: fman: make sure phy-handle property is big endian
When creating phy-handle property, an unsigned int value is created by
fdt_create_phandle, and memcpy is used to get the value, since DTS is
big endian, the value cannot be used directly on little endian SoCs,
it should be converted by cpu_to_fdt32.

Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-12-13 18:27:28 -08:00
York Sun
3901978d42 armv8/ls2080ardb: Update DDR settings for four chip-select case
When 4 chip-selects are used, vref should use range 1 and CDT uses 80 ohm,
and 2T timing is enabled.

Signed-off-by: York Sun <yorksun@freescale.com>
2015-12-13 18:27:28 -08:00
York Sun
c4243ac9e2 armv8/ls2080aqds: Update DDR settings for four chip-select case
When 4 chip-selects are used, vref should use range 1 and CDT uses 80 ohm,
and 2T timing is enabled.

Signed-off-by: York Sun <yorksun@freescale.com>
2015-12-13 18:27:28 -08:00
Peng Fan
53cc647dc6 imx: mx7dsabresd: Add QSPI support
Support qspi flashes for mx7dsabresd
1. introduce pin mux settings
2. enable qspi clock
3. introduce related macro definitions

Default QSPI is not enabled, since we need hardware rework to use QSPI,
see SPF-28590, page 9:
"
QSPI signals are muxed with EPDC_D[7:0]
When using QSPI: de-populate R388-R391, R396-R399
populate R392-R395, R299, R300
"

After hardware rework, define CONFIG_FSL_QSPI in mx7dsabresd.h. qspi
flashes can be deteced and read/erase/write. Log info:
"
=> sf probe
SF: Detected MX25L51235F with page size 256 Bytes, erase size 64 KiB, total 64 MiB
=> sf read 0x80000000 0 0x4000000
device 0 whole chip
SF: 67108864 bytes @ 0x0 Read: OK
=> sf erase 0 0x4000000
SF: 67108864 bytes @ 0x0 Erased: OK
=> sf write 0x80000000 0 0x4000000
device 0 whole chip
SF: 67108864 bytes @ 0x0 Written: OK
"

Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Adrian Alonso <aalonso@freescale.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Reviewed-by: Jagan Teki <jteki@openedev.com>
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
2015-12-11 22:12:23 +05:30
Fabio Estevam
29bc24ec4f mx6sxsabresd: Fix Ethernet PHY reset sequence
Since commit 59370f3fcd ("net: phy: delay only if reset handler is
registered") Ethernet is no longer functional.

This commit does not have an issue in itself, but it revelead a problem
with the Ethernet initialization.

Fix this by calling enable_fec_anatop_clock() earlier and also
by adding a 10ms reset delay as recommended in the AR8031 datasheet.

Suggested-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2015-12-07 14:55:24 +01:00
Prabhakar Kushwaha
5380335e66 board/ls2080qds: Fix typo in README for QSGMII riser card
DPMACx to PHY mapping for SGMII is mentioned as QSGMII.

So fix typo in README for QSGMII rise card.

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
[York Sun: Change from ls2085aqds to ls2080aqds]
Reviewed-by: York Sun <yorksun@freescale.com>
2015-11-30 09:11:12 -08:00
Gong Qianyu
7023100971 armv8/ls1043ardb: add USB support
Add support for the third USB controller for LS1043A.

Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-11-30 09:11:11 -08:00
Shaohui Xie
02b5d2ed86 armv8/ls1043aqds: add LS1043AQDS board support
LS1043AQDS Specification:
-------------------------
Memory subsystem:
 * 2GByte DDR4 DIMM
 * 128 Mbyte NOR flash single-chip memory
 * 512 Mbyte NAND flash
 * 16 Mbyte high-speed SPI flash
 * SD connector to interface with the SD memory card

Ethernet:
 * Two RGMII ports
 * XFI 10G port
 * SGMII
 * QSGMII with 4x 1G ports

PCIe: supports Gen 1 and Gen 2

SATA 3.0: one SATA 3.0 port

USB 3.0: two micro AB connector and one type A connector

UART: supports two UARTs up to 115200 bps for console

Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com>
Signed-off-by: Hou Zhiqiang <B48286@freescale.com>
Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com>
[York Sun: Add CONFIG_SYS_NS16550=y in defconfig]
Reviewed-by: York Sun <yorksun@freescale.com>
2015-11-30 09:11:10 -08:00
Prabhakar Kushwaha
06b5301043 armv8: ls2085a: Add support of LS2085A SoC
Freescale's LS2085A is a another personality of LS2080A SoC with
support of AIOP and DP-DDR.
This Patch adds support of LS2085A Personality.

Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
[York Sun: Updated MAINTAINERS files
           Dropped #ifdef in cpu.h
           Add CONFIG_SYS_NS16550=y in defconfig]
Reviewed-by: York Sun <yorksun@freescale.com>
2015-11-30 09:10:47 -08:00
Prabhakar Kushwaha
449372148f armv8: LS2080A: Rename LS2085A to reflect LS2080A
LS2080A is a prime personality of Freescale’s LS2085A. It is a non-AIOP
personality without support of DP-DDR, L2 switch, 1588, PCIe endpoint etc.
So renaming existing LS2085A code base to reflect LS2080A (Prime personality)

Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
[York Sun: Dropped #ifdef in cpu.c for cpu_type_list]
Reviewed-by: York Sun <yorksun@freescale.com>
2015-11-30 08:53:04 -08:00
Prabhakar Kushwaha
1730a17db9 driver: net: fsl-mc: Create DPAA2 object at run-time
Freescale's DPAA2 ethernet driver depends upon the static DPL for the
DPRC, DPNI, DPBP, DPIO objects.

Instead of static objects, Create DPNI, DPBP, DPIO objects at run-time.

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-11-30 08:53:03 -08:00
Prabhakar Kushwaha
25af413740 armv8: ls2085aqds: Print function name during SerDes error
Print function name along with SerDes Protocol during SerDes Protocol
not supported error.

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-11-30 08:53:02 -08:00
Simon Glass
24b852a7a2 Move console definitions into a new console.h file
The console includes a global variable and several functions that are only
used by a small subset of U-Boot files. Before adding more functions, move
the definitions into their own header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-11-19 20:27:50 -07:00
Peng Fan
ebe517b63c imx: mx7dsabresd: support lcdif
Support LCDIF for mx7dsabresd board:
1. Add pinmux settings
2. Add VIDEO related macro definition and videomode env settings.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Adrian Alonso <aalonso@freescale.com>
2015-11-12 17:41:20 +01:00
Peng Fan
df67490488 imx: mx6ul_14x14_evk: support lcdif display
Support lcdif display:
1. Add pinmux and pad settings for LCDIF
2. Introduce setup_lcd to do the settings for LCDIF
3. Enable VIDEO related macros in board header files
4. Add a new env videomode which is needed by mxsfb.c. The
   settings for videomode in this patch is for TFT43AB.
5. Tested on mx6ul 14x14/9x9 evk.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
2015-11-12 17:40:53 +01:00
Fabio Estevam
4bdcbe60a1 mx6ul_14x14_evk: Remove empty reset_cpu()
There is really no need to provide an empty reset_cpu() implementation,
so just remove it.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2015-11-12 17:26:32 +01:00
Fabio Estevam
cec6f213b6 mx6sxsabresd: Remove empty reset_cpu()
There is really no need to provide an empty reset_cpu() implementation,
so just remove it.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2015-11-12 17:26:31 +01:00
Fabio Estevam
c0039753cb mx6slevk: Remove empty reset_cpu()
There is really no need to provide an empty reset_cpu() implementation,
so just remove it.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2015-11-12 17:26:31 +01:00
Fabio Estevam
26fbe9e531 mx6sabresd: Remove empty reset_cpu()
There is really no need to provide an empty reset_cpu() implementation,
so just remove it.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2015-11-12 17:26:30 +01:00
Stefano Babic
5f5620ab26 Merge git://git.denx.de/u-boot 2015-11-12 17:13:26 +01:00
Fabio Estevam
9549867c86 ls1043ardb: Add missing config entries to MAINTAINERS
ls1043ardb_nand_defconfig and ls1043ardb_sdcard_defconfig are missing
in the MAINTAINERS file, so add them for completeness.

Reported-by: Albert Aribaud <albert.u.boot@aribaud.net>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2015-11-10 16:52:58 +01:00
Yangbo Lu
bf50be835e mmc: fsl_esdhc: enable EVDD automatic control for SD/MMC Legacy Adapter Card
When detecting SDHC Adapter Card Type 2(SD/MMC Legacy Adapter Card),
enable EVDD automatic control via SDHC_VS. This could support SD card
IO voltage switching for UHS-1 speed mode.

Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-11-02 08:50:29 -08:00
Yangbo Lu
cdc69550d2 mmc: fsl_esdhc: enable dat[4:7] for eMMC4.5 Adapter Card
If adapter card type identification is supported for platform, we would
enable dat[4:7] for eMMC4.5 Adapter Card.

Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-11-02 08:49:51 -08:00
Zhao Qiang
d468377672 t1040d4rdb: assign muxed pins to qe-tdm when set hwconfig qe-tdm
qe-tdm is muxed with diu, if hwconfig setted as qe-tdm,
assign muxed pins to qe-tdm, then delete diu node from
device tree.

Signed-off-by: Zhao Qiang <qiang.zhao@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-11-02 08:48:20 -08:00
tang yuantian
0210a36988 arm: ls1021atwr: optimize the deep sleep latency
It will take more than 1s when wake up from deep sleep. Most of the
time is spent on outputing information. This patch reduced the deep
sleep latency by:
1. avoid outputing system informaton
2. remove flush cache after DDR restore
3. skip reloading second stage uboot binary when SD boot

Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-10-30 09:19:48 -07:00
Aneesh Bansal
6ec9aef2ce SECURE_BOOT: Correct reading of ITS bit
The ITS bit was being read incorrectly beacause of operator
precedence. The same ahs been corrected.

Signed-off-by: Lawish Deshmukh <lawish.deshmukh@freescale.com>
Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-10-30 09:19:47 -07:00
Adrian Alonso
78e9ca52ed mx7dsabresd: add secure boot support
Add secure boot support for mx7dsabresd target board

Signed-off-by: Adrian Alonso <aalonso@freescale.com>
2015-10-30 15:22:37 +01:00
Peng Fan
e469719c8b imx: mx6sabresd: add i.MX6DQP Sabresd support
Add i.MX6DQP-Sabresd board support:
1. set fdt_file according to board_rev which is set at runtime.
2. Add mx6dqp_ddr_ioregs and calibration value for this board.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
2015-10-30 15:15:36 +01:00
tang yuantian
4632ad773e arm: ls1021a: Add sata support on qds and twr board
Freescale ARM-based Layerscape LS102xA contain a SATA controller
which comply with the serial ATA 3.0 specification and the
AHCI 1.3 specification.
This patch adds SATA feature on ls1021aqds and ls1021atwr boards.

Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-10-29 10:34:02 -07:00
Gong Qianyu
c7ca8b07fc armv8/ls1043ardb: Add sd boot support
Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-10-29 10:34:02 -07:00
Yangbo Lu
8ef0d5c438 armv8/ls1043ardb: esdhc: Add esdhc support for ls1043ardb
This patch adds esdhc support for ls1043ardb.

Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com>
Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-10-29 10:34:01 -07:00
Shaohui Xie
e82973414d armv8/ls1043a: Add Fman support
Signed-off-by: Hou Zhiqiang <B48286@freescale.com>
Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com>
Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-10-29 10:34:01 -07:00
Gong Qianyu
3ad4472923 armv8/ls1043ardb: Add nand boot support
Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com>
Signed-off-by: Hou Zhiqiang <B48286@freescale.com>
Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-10-29 10:34:01 -07:00
Mingkai Hu
f3a8e2b7d4 armv8/ls1043ardb: Add LS1043ARDB board support
LS1043ARDB Specification:
-------------------------
Memory subsystem:
 * 2GByte DDR4 SDRAM (32bit bus)
 * 128 Mbyte NOR flash single-chip memory
 * 512 Mbyte NAND flash
 * 16 Mbyte high-speed SPI flash
 * SD connector to interface with the SD memory card

Ethernet:
 * XFI 10G port
 * QSGMII with 4x 1G ports
 * Two RGMII ports

PCIe:
 * PCIe2 (Lanes C) to mini-PCIe slot
 * PCIe3 (Lanes D) to PCIe slot

USB 3.0: two super speed USB 3.0 type A ports

UART: supports two UARTs up to 115200 bps for console

Signed-off-by: Hou Zhiqiang <B48286@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com>
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com>
2015-10-29 10:34:01 -07:00