mx7dsabresd: Make 'ums' command functional

When running the 'ums' command we get:

=> ums 0 mmc 0
UMS: disk start sector: 0x0, count: 0xe18000
g_dnl_register: failed!, error: -22
ERROR: g_dnl_register failed
at common/cmd_usb_mass_storage.c:107/do_usb_mass_storage()

Fix this by initializing USB OTG1 port as USB device mode instead of host.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
This commit is contained in:
Fabio Estevam 2016-02-17 13:34:22 -02:00 committed by Stefano Babic
parent 88e826be45
commit 2b8e8d2671

View file

@ -23,6 +23,7 @@
#include <i2c.h>
#include <asm/imx-common/mxc_i2c.h>
#include <asm/arch/crm_regs.h>
#include <usb.h>
#include <usb/ehci-fsl.h>
DECLARE_GLOBAL_DATA_PTR;
@ -111,6 +112,14 @@ static iomux_v3_cfg_t const usdhc3_emmc_pads[] = {
MX7D_PAD_SD3_RESET_B__GPIO6_IO11 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
};
static iomux_v3_cfg_t const usb_otg1_pads[] = {
MX7D_PAD_GPIO1_IO05__USB_OTG1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
};
static iomux_v3_cfg_t const usb_otg2_pads[] = {
MX7D_PAD_UART3_CTS_B__USB_OTG2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
};
#define IOX_SDI IMX_GPIO_NR(1, 9)
#define IOX_STCP IMX_GPIO_NR(1, 12)
#define IOX_SHCP IMX_GPIO_NR(1, 13)
@ -511,6 +520,10 @@ int board_early_init_f(void)
setup_iomux_uart();
setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
imx_iomux_v3_setup_multiple_pads(usb_otg1_pads,
ARRAY_SIZE(usb_otg1_pads));
imx_iomux_v3_setup_multiple_pads(usb_otg2_pads,
ARRAY_SIZE(usb_otg2_pads));
return 0;
}
@ -602,29 +615,11 @@ int checkboard(void)
}
#ifdef CONFIG_USB_EHCI_MX7
static iomux_v3_cfg_t const usb_otg1_pads[] = {
MX7D_PAD_GPIO1_IO05__USB_OTG1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
};
static iomux_v3_cfg_t const usb_otg2_pads[] = {
MX7D_PAD_UART3_CTS_B__USB_OTG2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
};
int board_ehci_hcd_init(int port)
int board_usb_phy_mode(int port)
{
switch (port) {
case 0:
imx_iomux_v3_setup_multiple_pads(usb_otg1_pads,
ARRAY_SIZE(usb_otg1_pads));
break;
case 1:
imx_iomux_v3_setup_multiple_pads(usb_otg2_pads,
ARRAY_SIZE(usb_otg2_pads));
break;
default:
printf("MXC USB port %d not yet supported\n", port);
return -EINVAL;
}
return 0;
if (port == 0)
return USB_INIT_DEVICE;
else
return USB_INIT_HOST;
}
#endif