Commit graph

7312 commits

Author SHA1 Message Date
Ilko Iliev
fdd2f359e4 imx: Add support for Ronetix's iMX7-CM board
Console boot log:

U-Boot SPL 2021.04-00836-ga6232e065d-dirty (Apr 16 2021 - 15:16:35 +0200)
Trying to boot from MMC1

U-Boot 2021.04-00836-ga6232e065d-dirty (Apr 16 2021 - 15:16:35 +0200)

CPU:   Freescale i.MX7D rev1.3 1000 MHz (running at 792 MHz)
CPU:   Commercial temperature grade (0C to 95C) at 44C
Reset cause: POR
Model: Ronetix iMX7-CM Board
Board: iMX7-CM
DRAM:  512 MiB
PMIC:  PFUZE3000 DEV_ID=0x30 REV_ID=0x11
MMC:   FSL_SDHC: 0, FSL_SDHC: 2
Loading Environment from MMC... OK
In:    serial
Out:   serial
Err:   serial
Net:
Warning: ethernet@30be0000 (eth0) using random MAC address - fe:be:37:01:5a:3f
eth0: ethernet@30be0000
Hit any key to stop autoboot:  0

Signed-off-by: Ilko Iliev <iliev@ronetix.at>
2021-05-02 12:46:54 +02:00
Ying-Chun Liu (PaulLiu)
53b516c58d arm: imx8m: add support for Compulab iot-gate-imx8 (imx8mm-cl-iot-gate)
Add initial support for Compulab iot-gate-imx8 board (imx8mm-cl-iot-gate).
The initial support includes:
 - MMC
 - eMMC
 - I2C
 - FEC
 - Serial console

Signed-off-by: Kirill Kapranov <kirill.kapranov@compulab.co.il>
Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
Signed-off-by: Valentin Raevsky <valentin@compulab.co.il>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
Cc: Peter Robinson <pbrobinson@gmail.com>
2021-05-02 12:46:54 +02:00
Jagan Teki
7e0daa924a board: imx8mm: Add Engicam i.Core MX8M Mini C.TOUCH 2.0
Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose Carrier
board.

Genaral features:
- Ethernet 10/100
- Wifi/BT
- USB Type A/OTG
- Audio Out
- CAN
- LVDS panel connector

i.Core MX8M Mini is an EDIMM SoM based on NXP i.MX8M Mini from Engicam.

i.Core MX8M Mini needs to mount on top of this Carrier board for
creating complete i.Core MX8M Mini C.TOUCH 2.0 board.

Linux dts commit details:

commit <a142252061ff> ("arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini
C.TOUCH 2.0")

Add support for it.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-05-02 12:46:54 +02:00
Jagan Teki
e3409a4cb7 board: imx8mm: Add Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit
Engicam EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive
Evaluation Board.

Genaral features:
- LCD 7" C.Touch
- microSD slot
- Ethernet 1Gb
- Wifi/BT
- 2x LVDS Full HD interfaces
- 3x USB 2.0
- 1x USB 3.0
- HDMI Out
- Mini PCIe
- MIPI CSI
- 2x CAN
- Audio Out

i.Core MX8M Mini is an EDIMM SoM based on NXP i.MX8M Mini from Engicam.

i.Core MX8M Mini needs to mount on top of this Evaluation board for
creating complete i.Core MX8M Mini EDIMM2.2 Starter Kit.

Linux dts commit details:

commit <051c08eea682> ("arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini
EDIMM2.2 Starter Kit")

Add support for it.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-05-02 12:46:54 +02:00
Ian Ray
62e3232122 configs: ge: use non-persistent environment
Disable the unused persistent environment.

Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-05-02 12:46:54 +02:00
Ian Ray
aca3b4e193 configs: ge: bx50v3: adjust watchdog period
Increase watchdog period, in order to accomodate recent kernel size
and configuration changes.

Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-05-02 12:46:54 +02:00
Tom Rini
f3a0d2c1af Xilinx changes for v2021.07-rc2
xilinx:
 - Enable saving variables based on bootmode
 - Cleanup usb dfu setup and wire it up with usb bootmode
 - Fix bootscript address logic
 - Remove GD references (spi, Versal)
 - Enable capsule update
 
 clk:
 - Small Kconfig fix
 
 net:
 - Fix gmii2rgmii bridge binding
 
 usb:
 - Propagate error (dfu gadget)
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCYIqrgAAKCRDKSWXLKUoM
 IY86AJ9X9G6IwfnhHFWhManDrzPoBGaSBwCfVjMzPQcCddlGAW8UJ1NaPCLPPNc=
 =ACHF
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2021.07-rc2' of https://source.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx changes for v2021.07-rc2

xilinx:
- Enable saving variables based on bootmode
- Cleanup usb dfu setup and wire it up with usb bootmode
- Fix bootscript address logic
- Remove GD references (spi, Versal)
- Enable capsule update

clk:
- Small Kconfig fix

net:
- Fix gmii2rgmii bridge binding

usb:
- Propagate error (dfu gadget)
2021-04-29 11:31:06 -04:00
Igal Liberman
e49cdbe10b phy: marvell: add RX training command
This patch adds support for running RX training using new command called
"rx_training"
Usage:
rx_training - rx_training <cp id> <comphy id>

RX training allows to improve link quality (for SFI mode)
by running training sequence between us and the link partner,
this allows to reach better link quality then using static configuration.

Change-Id: I818fe67ccaf19a87af50d4c34a9db7d6802049a5
Signed-off-by: Igal Liberman <igall@marvell.com>
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
2021-04-29 07:45:24 +02:00
Konstantin Porotchkin
c405226c34 arm: octeontx2: Add Octeon TX2 CN9130 CRB support
This patch adds the base support for the Marvell Octeon TX2 CN9130 CRB.
Not all interfaces are supported fully yet.

Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-29 07:45:13 +02:00
Konstantin Porotchkin
c864c41f19 arm: armada: configs: Move environment location for mvebu
Move the default environment location to the end of 4MB flash
region. This change allows to accomodate larger flash boot
images making space for forthcoming code changes.

Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-29 07:39:15 +02:00
Tom Rini
939c4934c8 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-28 10:05:13 +02:00
Marek Vasut
1b2d1d774a ARM: rmobile: Enable NVMe support on RCar3
Enable support for PCIe NVMe devices.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2021-04-28 10:05:12 +02:00
Marek Vasut
ee0a7760fd ARM: rmobile: Enable CONFIG_SYS_FLASH_PROTECTION
Enable CONFIG_SYS_FLASH_PROTECTION on Salvator-X(S), ULCB, Ebisu,
which means the Spansion HF PPB protection bits can be operated
using the 'protect' U-Boot command.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2021-04-28 10:05:12 +02:00
Aaron Williams
594312eb8b mips: octeon: ebb7304: Add support for some I2C devices
This patch adds support for the following I2C devices connected to
I2C bus 0 on the Octeon EBB7304:
- Dallas DS1337 RTC
- TLV EEPROM

Signed-off-by: Aaron Williams <awilliams@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Chandrakala Chavva <cchavva@marvell.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-04-28 10:05:12 +02:00
Stefan Roese
5d2d5c4f23 mips: octeon: Add Octeon III NIC23 board support
This patch adds the basic support for the PCIe target board equipped
with the Octeon III CN2350 SoC.

Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-28 10:05:12 +02:00
Stefan Roese
7eaa10551a mips: octeon: octeon_ebb7304_defconfig: Enable Octeon PCIe and E1000
This patch changes the MIPS Octeon defconfig to enable some features
for PCIe enablement. This includes CONFIG_BOARD_LATE_INIT to call the
board specific serdes init code.

With these features enabled, the serdes and PCIe driver including the
Intel E1000 driver can be tested on the Octeon EBB7304.

Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-28 10:05:12 +02:00
Tom Rini
55a3694286 Merge https://source.denx.de/u-boot/custodians/u-boot-sh
- RCar3 improvements
2021-04-26 11:04:24 -04:00
Michal Simek
0b0705b5ed arm64: zynqmp: Enable capsule update
Enable EFI capsule update features to be enabled by default also with all
dfu valid options for ZynqMP.

This feature was tested on Xilinx ZynqMP zcu104 board with defining
dfu_alt_info="mmc 0:1=boot.bin fat 0 1;u-boot.itb fat 0 1"
and
dfu_alt_info="sf 0:0=boot.bin raw 0 0x50000;u-boot.itb raw 0x80000
0x500000".

There is a need to increase malloc size for getting dfu mmc to work.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
CC: Sughosh Ganu <sughosh.ganu@linaro.org>
CC: Ilias Apalodimas <ilias.apalodimas@linaro.org>
CC: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-04-26 14:31:50 +02:00
Marek Vasut
c3ce197508 ARM: rmobile: Enable NVMe support on RCar3
Enable support for PCIe NVMe devices.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2021-04-26 01:32:52 +02:00
Marek Vasut
42fb6780bf ARM: rmobile: Enable CONFIG_SYS_FLASH_PROTECTION
Enable CONFIG_SYS_FLASH_PROTECTION on Salvator-X(S), ULCB, Ebisu,
which means the Spansion HF PPB protection bits can be operated
using the 'protect' U-Boot command.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2021-04-26 01:32:52 +02:00
Tom Rini
4dda435131 - MIPS: octeon: fix minor bugs of initial merge
- MIPS: octeon: add support for QLM and PCI-E controller
 - MIPS: octeon: add support for AHCI and SATA
 - MIPS: octeon: add E1000 ethernet support
 - MIPS: octeon: add Octeon III NIC23 board
 - ata/scsi: add support for Big Endian platforms
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiQkHUH+J02LLC9InKPlOlyTyXBgFAmCEf04ACgkQKPlOlyTy
 XBj2Aw//SxPX48XynT979cMIOoylO6Rs1saWtQr32YmycWnGC0/wvFNPU/kjNP/a
 jinOxvY2TSBNqToSuCDZxGXyijMIdAnWVCQCUXmah7bZ+GtiYWR0SHNO0TQ+qrBW
 06CC7hgQQqQswGClJe4njwTyVIzTQvyo/UdjS6RWggDZPsnGpyMlR5O56ZCNNH8o
 1XFCG8hSrQBRO38RpXciGS3dFeaqOQy96K9M5pellf9Fh5a+jHyAmK8Z/0R+T6cG
 +PoNh6qZAsXFj0PVuvu0CaXFHpP+fhdA4kEwt64PJCe8D3x7d05COuN0bL+e6D6u
 E4cSnkjmzNgYvoi4YAGaQN9f4PKPSMHuYf7YdIBFCQQ8OtxNXpUHOg0zr4SRnq/C
 ypq285f2O7Aq+3t0BrC7jTjo+Y2PzVIUR8MXpvh698ZSdJnqOlJf0y5tRwdhf/+k
 gh+rT7mWIOoRRWpb6qHMUr5gnparl0gOykspMlQ2NKB+kfmC4RP2pYxQFp82TFIq
 ZMUaXer2/g5dVptEhTU0vBsTrk7s/u239WtwyXpOCdoM6sI/FoMoiCoQoD2isKP6
 mUv/iwTpfNTtQnx5MM2Xsu+8pzcXjaVeoMaNcI55jZ2QTCoMAFA6odYTk+GHS3Vx
 Yt3TLrH6O46PXNSULROkmTR4RgiDHcGCX/HGTKkcA/+X9GDjjNc=
 =JwRN
 -----END PGP SIGNATURE-----

Merge tag 'mips-pull-2021-04-24' of https://source.denx.de/u-boot/custodians/u-boot-mips

- MIPS: octeon: fix minor bugs of initial merge
- MIPS: octeon: add support for QLM and PCI-E controller
- MIPS: octeon: add support for AHCI and SATA
- MIPS: octeon: add E1000 ethernet support
- MIPS: octeon: add Octeon III NIC23 board
- ata/scsi: add support for Big Endian platforms
2021-04-24 19:39:14 -04:00
Aaron Williams
b1d9554e05 mips: octeon: ebb7304: Add support for some I2C devices
This patch adds support for the following I2C devices connected to
I2C bus 0 on the Octeon EBB7304:
- Dallas DS1337 RTC
- TLV EEPROM

Signed-off-by: Aaron Williams <awilliams@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Chandrakala Chavva <cchavva@marvell.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-04-23 21:23:30 +02:00
Stefan Roese
ec85347102 mips: octeon: Add Octeon III NIC23 board support
This patch adds the basic support for the PCIe target board equipped
with the Octeon III CN2350 SoC.

Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-23 21:22:55 +02:00
Stefan Roese
e024566a55 mips: octeon: octeon_ebb7304_defconfig: Enable Octeon PCIe and E1000
This patch changes the MIPS Octeon defconfig to enable some features
for PCIe enablement. This includes CONFIG_BOARD_LATE_INIT to call the
board specific serdes init code.

With these features enabled, the serdes and PCIe driver including the
Intel E1000 driver can be tested on the Octeon EBB7304.

Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-23 21:22:27 +02:00
Tom Rini
84baa65dff Merge branch '2021-04-22-assorted-updates'
- Move LMB to Kconfig, improve functionality
- Add partlabel support to more fs cmds
2021-04-23 12:21:37 -04:00
Tom Rini
e8b8c2085c - net: fix traffic problems in MSCC Jaguar 2 network driver
- MIPS: mt7628: fix DDR memory init
 - MIPS: octeon: add MMC and USB support
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiQkHUH+J02LLC9InKPlOlyTyXBgFAmCBqmkACgkQKPlOlyTy
 XBhwHg//VWT1TEYj24hxvNhLe4mII+SvZ1rMsSENfle8aO2t/CsixYj/MF9ihhB5
 46DsvX3wC461PiQBptp691AwhYoqhLujOvz1jxiutUJE2SqqNtIrQFQO2NhWvWJ4
 GcnYb2rlNGz4Cujn9OW2rHwus9p7igjB//E/q0lNtdTy13SH8pDPhjOUG/m+dSrC
 GQl5dsHvH3KArZfV4ctCMVgS8JN5V3uOgiWnI2Ly+JeqU9n22Fh0kvpohPd5ybSt
 dsiiCJGfwhQrx9tJzD3GHu/RU0LACgC3lZTR2rd/zy8BLXxiOIW1xK/Hlk1Ac2H2
 tkNq4JXF/yTd8DpAdC/VZkwMfMkcb5vSdNAfDn8hfcCcHXV+CYtVGTOUfDzBBFVW
 9MASnq4W8zLS1vJL2TWx1nNEcsa9/zhIHhC59PpG2lDPEgZhYrQSk7OqRaisis4k
 qBlGKFr2aIC2LAnRVRkIITNkUiVPpvj6t0s1WeDHhrP5cDXJrFzGzOYbekG5DVTZ
 +V64T/5ph6uYNCZwao1WWfNwaUBp51aqfbzizxKv8/C4e/8qdhVVn/otX/1MsFhP
 ByFOZcvEpXDVslpX8D7A5JO1Q3fIri2tVWbtAooEVXsZQNxWxiRR9x6KtnzhOY2D
 6gs2Go2Z46RI2hq9UU7hoLlasvbg0zQxDpVG8f1bwaZ+myRS/6U=
 =Rl6A
 -----END PGP SIGNATURE-----

Merge tag 'mips-pull-2021-04-22' of https://source.denx.de/u-boot/custodians/u-boot-mips

- net: fix traffic problems in MSCC Jaguar 2 network driver
- MIPS: mt7628: fix DDR memory init
- MIPS: octeon: add MMC and USB support
2021-04-23 07:31:21 -04:00
Michal Simek
84befd408c xilinx: Enable GUID partitions and EFI variable commands
For work with EFI it is good to have GUID partitions enabled and also
option to work with UEFI variables. That's why enable both.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-04-23 08:48:30 +02:00
T Karthik Reddy
84e7cc9126 xilinx: Enable DFU_TIMEOUT config
Enable CONFIG_DFU_TIMEOUT to set timeout waiting for dfu command.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-04-23 08:45:55 +02:00
T Karthik Reddy
ef1be3e364 xilinx: zynqmp: Add usb dfu/thor distro boot support
In usb boot mode distro boot should select usb device as primary boot
device instead of usb host. So make usb dfu as primary boot device. But do
not list it in boot_targets as fallback option because it is not classic
mode for booting. Using 60s timeout by default should be enough time for
dfu-utils to start transaction. In case none needs this please change
timeout value in the command or disable CONFIG_DFU_TIMEOUT.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-04-23 08:45:55 +02:00
Michal Simek
4274dc3947 xilinx: Enable redundant variable handling
Enable this feature by default to be able to work with env import/export
commands which are done in this slightly changed variable format (There is
addtional flag fields in variable file which is changing CRC calculation).

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-04-23 08:43:47 +02:00
Ashok Reddy Soma
4fb83c9c2b xilinx: versal: Add support for saving env based on bootmode
Enable saving variables to MMC(FAT) and SPI based on primary
bootmode. If bootmode is JTAG, dont save env anywhere(NOWHERE).

Enable ENV_FAT_DEVICE_AND_PART="0:auto" for Versal platforms as well.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-04-23 08:43:25 +02:00
Ashok Reddy Soma
cd08513b05 xilinx: zynq: Add support for saving env based on bootmode
Enable saving variables to MMC(FAT), NAND, SPI based on primary
bootmode. If bootmode is JTAG, dont save env anywhere(NOWHERE).

Since most of the flashes on zynq evaluation boards are 16MB in size,
set default ENV_OFFSET to 15MB(0xE00000).

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-04-23 08:43:18 +02:00
Patrick Delaunay
0089affee2 configs: stm32mp15: increase the number of reserved memory region in lmb
For the latest kernel device tree the max number of reserved regions
in lmb library is reached: 8 with 5 reserved regions in device tree.

When a new region is added, the lmb allocation for the device tree
relocation failed and boot with ramdisk failed.

This patch avoids this issue by increasing the max number of
supported reserved memory in lmb library to 16.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-04-22 14:09:45 -04:00
Stefan Roese
91ce06ad34 mips: octeon: octeon_ebb7304_defconfig: Enable USB storage support
This patch enables USB storage support with the necessary partition
support on the MIPS Octeon EBB7304.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Aaron Williams <awilliams@marvell.com>
Cc: Chandrakala Chavva <cchavva@marvell.com>
2021-04-22 03:02:37 +02:00
Stefan Roese
b9849fd543 mips: octeon: octeon_ebb7304_defconfig: Enable MMC support
Enable MMC support including the regulator support on Octeon EBB7304.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Aaron Williams <awilliams@marvell.com>
Cc: Chandrakala Chavva <cchavva@marvell.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-04-22 02:47:57 +02:00
Peter Robinson
d410dc8802 ARM: imx: udoo_neo: Convert to ethernet DM
Convert the UDOO Neo to ethernet DM support.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: Francesco Montefoschi <francesco.montefoschi@udoo.org>
Cc: Breno Lima <breno.lima@nxp.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2021-04-20 13:31:35 -04:00
Peter Robinson
9db428904f ARM: imx: udoo_neo: convert to DM_MMC
Convert UDOO Neo to use DM MMC.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: Francesco Montefoschi <francesco.montefoschi@udoo.org>
Cc: Breno Lima <breno.lima@nxp.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2021-04-20 13:31:35 -04:00
Peter Robinson
191840ae99 ARM: imx: udoo_neo: Enable OF_CONTROL and DM gpio/pin control
Enable OF_CONTROL and DM for gpio and pin control support
on the i.MX6SX based Udoo Neo.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: Francesco Montefoschi <francesco.montefoschi@udoo.org>
Cc: Breno Lima <breno.lima@nxp.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2021-04-20 13:31:35 -04:00
Joel Peshkin
4e9bce1243 Add support for stack-protector
Add support for stack protector for UBOOT, SPL, and TPL
as well as new pytest for stackprotector

Signed-off-by: Joel Peshkin <joel.peshkin@broadcom.com>

Adjust UEFI build flags.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-04-20 07:31:12 -04:00
Andre Przywara
1238d0143a arm: highbank: Do DRAM init from DT
So far U-Boot was hard coding a (surely sufficient) memory size of 512
MB, even though all machines out there have at least 4GB of DRAM.
Since U-Boot uses its memory knowledge to populate the EFI memory map,
we are missing out here, at best losing everything beyond 4GB on Midway
boxes (which typically come with 8GB of DRAM).

Since the management processor populated the DT memory node already with
the detected DRAM size and configuration, we use that to populate
U-Boot's memory bank information, which is the base for the UEFI memory
map.
This finally allows us to get rid of the NR_DRAM_BANKS=0 hack, that we
had in place to avoid U-Boot messing up the DT memory node before
loading the kernel.

Also, to cover the whole of memory, we need to enable PHYS_64BIT.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-04-20 07:31:12 -04:00
Andre Przywara
debb07bf10 net: calxedagmac: Convert to DM_ETH
To squash that nasty warning message and make better use of the newly
gained OF_CONTROL feature, let's convert the calxedagmac driver to the
"new" driver model.
The conversion is pretty straight forward, mostly just adjusting the
use of the involved data structures.
The only actual change is the required split of the receive routine into
a receive and free_pkt part.
Also this allows us to get rid of the hardcoded platform information and
explicit init calls.

This also uses the opportunity to wrap the code decoding the MMIO
register base address, to make it safe for using PHYS_64BIT later.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-04-20 07:31:12 -04:00
Andre Przywara
109552d773 arm: highbank: Enable OF_CONTROL
All Calxeda machines are actually a poster book example of device tree
usage: the DT is loaded from flash by the management processor into
DRAM, the memory node is populated with the detected DRAM size and this
DT is then handed over to the kernel.
So it's a shame that U-Boot didn't participate in this chain, but
fortunately this is easy to fix:

Define CONFIG_OF_CONTROL and CONFIG_OF_BOARD, and provide a trivial
function to tell U-Boot about the (fixed) location of the DTB in DRAM.
Then enable DM_SERIAL, to let the PL011 driver pick up the UART platform
data from the DT. Also define AHCI, to bring this driver into the driver
model world as well.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-04-20 07:31:12 -04:00
Tim Harvey
9889a8e562 arm: octeontx: enable WDT_SBSA
The OcteonTX uses ARM's SBSA Watchdog device

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-04-20 07:31:12 -04:00
Tim Harvey
ab7f8d1850 arm: octeontx: move CONFIG_SUPPORT_RAW_INITRD to configs
Move CONFIG_SUPPORT_RAW_INITRD out of the octeontx_common header
and into the defconfig files.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-04-20 07:31:12 -04:00
Wasim Khan
57c675d699 sandbox: enable IRQ using select for sandbox architecture
Enable IRQ using select for sandbox architecture.

Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-04-20 07:31:35 -04:00
Neil Armstrong
8f4f65ed6a configs: khadas-vim3: enable PCIe and NVMe
Now we have PCIe, let's also enable NVMe to access an eventual NVMe SSDs
connected on the M.2 slot.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-04-20 07:30:04 -04:00
Tom Rini
c6ae5e9869 Merge https://source.denx.de/u-boot/custodians/u-boot-usb
This is a patchset which makes away with the .bind() controller indexing
workaround which was broken since before v2021.04, and then adds PHY
support and MX8M support on top of that. Better add it into the release
early to get as much testing as possible done, because this really does
a lot of changes to the ehci-mx6 driver.
2021-04-18 08:46:58 -04:00
Tom Rini
2fbc804715 Merge tag 'ti-v2021.07-rc1' of https://source.denx.de/u-boot/custodians/u-boot-ti
- Support for pinmux status command on beaglebone
- Updates for MMC speed modes for J721e-evm
- Fix MMC booting on omap35_logic_somlv board
2021-04-18 08:46:39 -04:00
Marek Vasut
d08cdc223d ARM: imx8m: verdin-imx8mm: Enable USB Host support
Enable USB host support on MX8MM Verdin.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Cc: Max Krummenacher <max.krummenacher@toradex.com>
Cc: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2021-04-18 04:29:36 +02:00
Camelia Groza
20830d0c01 configs: T1042D4RDB: enable DM_ETH
Enable DM_ETH and DM_MDIO for the T1042D4RDB.

Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-04-15 14:27:44 +05:30
Camelia Groza
143a5e0dfc configs: T4240RDB: enable DM_ETH
Enable DM_ETH and DM_MDIO for the T4240RDB.

Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-04-15 14:27:12 +05:30
Camelia Groza
a24990b6d2 configs: T2080RDB: enable DM_ETH
Enable DM_ETH and DM_MDIO for the T2080RDB.

Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-04-15 14:26:30 +05:30
Michael Walle
356a3384d0 board: sl28: move DM_* configs to Kconfig
Move the CONFIG_DM_* from the defconfig to the TARGET_SL28 config.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-04-15 14:22:22 +05:30
Bin Meng
f6e95afc0d ppc: qemu: Enable eTSEC support
QEMU ppce500 target can dynamically instantiate an eTSEC device
if "-device eTSEC" is given to QEMU. This commit enables eTSEC
driver and the required fixed PHY driver to create a usable
network configuration using eTSEC.

Unlike a real world 85xx board that usually stores the eTSEC MAC
address in an EEPROM, CONFIG_NET_RANDOM_ETHADDR is required for
QEMU otherwise U-Boot ethernet initialization complains no valid
ethernet address is set.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-04-15 14:22:17 +05:30
Bin Meng
b3398993ba ppc: qemu: Create a virtual memory mapping of the platform bus
QEMU ppce500 target can dynamically instantiate an eTSEC device on
a platform bus if "-device eTSEC" is given to QEMU. It is presented
as a "simple-bus" in the device tree, with an additional compatible
string "qemu,platform".

Let's create a virtual memory mapping for it in misc_init_r(), in
preparation to adding eTSEC support.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-04-15 14:22:17 +05:30
Aleksandar Gerasimovski
91ee54741e board/km: add support for seli8 design based on nxp ls102x
The SELI8 design is a new tdm service unit card for Hitachi-Powergrids
XMC and FOX product lines.

It is based on NXP LS1021 SoC and it provides following interfaces:
 - IFC interface for NOR, NAND and external FPGA's
 - 1 x RGMII ETH for debug purposes
 - 2 x SGMII ETH for management communication via back-plane
 - 1 x uQE HDLC for management communication via back-plane
 - 1 x I2C for peripheral devices
 - 1 x SPI for peripheral devices
 - 1 x UART for debug logging

It is foreseen that the design will be later re-used for another XMC and
FOX service cards with similar SoC requirements.

Signed-off-by: Rainer Boschung <rainer.boschung@hitachi-powergrids.com>
Signed-off-by: Matteo Ghidoni <matteo.ghidoni@hitachi-powergrids.com>
Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-04-15 14:22:17 +05:30
Asherah Connor
69512551aa test: qemu: add qfw sandbox driver, dm tests, qemu tests
A sandbox driver and test are added for the qfw uclass, and a test in
QEMU added for qfw functionality to confirm it doesn't break in real
world use.

Signed-off-by: Asherah Connor <ashe@kivikakk.ee>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-04-12 17:45:39 -04:00
Etienne Carriere
0124218b8b firmware: scmi: sandbox test for voltage regulator
Implement sandbox regulator devices for SCMI voltage domains
and test them in DM scmi tests.

Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-04-12 17:17:11 -04:00
Sean Anderson
b935d19066 cmd: xtrace: Convert to bool
This variable is a boolean, not a string.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-04-12 17:17:11 -04:00
Peter Robinson
bedab97a21 Tegra: remove e2220-1170 board
It's an old bringup board with out upstream Linux or L4T support

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: Stephen Warren <swarren@nvidia.com>
Cc: Tom Warren <twarren@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
2021-04-12 17:17:11 -04:00
Dario Binacchi
5532262d46 test: pinmux: add test for 'pinctrl-single' driver
The test adds two pinmux nodes to the device tree, one to test when a
register changes only one pin's mux (pinctrl-single,pins), and the other
to test when more than one pin's mux is changed (pinctrl-single,bits).
This required replacing the controller's register access functions when
the driver is used on sandbox.

Signed-off-by: Dario Binacchi <dariobin@libero.it>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-04-12 11:17:15 +05:30
Adam Ford
099c9a47c9 configs: omap35_logic_somlv: Fix MMC booting
A previous patch had removed the GPIO nodes from being built
into the SPL Device tree, but CONFIG_SPL_GPIO_SUPPORT remained
which makes the MMC card detect fail and the board does not boot.
Fix this by disabling CONFIG_SPL_GPIO_SUPPORT.

Fixes: 6f1efe81aa ("configs: omap3/35_logic and omap3/35_logic_somlv: Reduce SPL size")
Signed-off-by: Adam Ford <aford173@gmail.com>
2021-04-12 08:38:49 +05:30
Tom Rini
d3cfc474b7 ppc: Remove MPC837XEMDS board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 14:33:35 -04:00
Tom Rini
a99dab1d33 ppc: Remove Cyrus_P5020 and P5040 boards
These boards have not been converted to CONFIG_DM_MMC by the deadline.
Remove them.  As the P5020 is the last ARCH_P5020 platform, remove that
support as well.

Cc: Andy Fleming <afleming@gmail.com>
Cc: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-04-10 08:05:07 -04:00
Tom Rini
a84ea228bc ppc: Remove controlcenterd boards
These boards have not been converted to CONFIG_DM_MMC by the deadline.
Remove them.

Cc: Mario Six <mario.six@gdsys.cc>
Cc: Dirk Eibach <dirk.eibach@gdsys.cc>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:04:55 -04:00
Tom Rini
7c964c3b93 ppc: Remove gdsys hrcon boards
These boards have not been converted to CONFIG_DM_MMC, along with other
DM conversions, by the deadline.  Remove them.

Cc: Dirk Eibach <dirk.eibach@gdsys.cc>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:04:42 -04:00
Tom Rini
ce4ca2b739 ppc: Remove gdsys strider boards
These boards have not been converted to CONFIG_DM_MMC, along with other
DM conversions, by the deadline.  Remove them.

Cc: Dirk Eibach <dirk.eibach@gdsys.cc>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:04:42 -04:00
Tom Rini
ddfb9aef65 ppc: Remove MPC8308RDB board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:04:42 -04:00
Tom Rini
2322b9568f ppc: Remove T2081QDS board and ARCH_T2081 support
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.  It is also the only ARCH_T2081 board so remove that support
as well.

Cc: Shengzhou Liu <Shengzhou.Liu@nxp.com>
Cc: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:04:42 -04:00
Tom Rini
37d14f3b6e arm: Remove tqma6s_wru4_mmc config
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Markus Niebel <Markus.Niebel@tq-group.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:03:55 -04:00
Tom Rini
4bbcec08eb arm: Remove mx6dlarm2 board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Jason Liu <jason.hui.liu@nxp.com>
Cc: Ye Li <ye.li@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:03:55 -04:00
Tom Rini
178d70b5b3 arm: Remove cgtqmx6eval board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:03:55 -04:00
Tom Rini
defd0dcfb9 arm: Remove titanium board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:03:55 -04:00
Tom Rini
80b386abe3 arm: Remove ts4800 board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Lucile Quirion <lucile.quirion@savoirfairelinux.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:03:55 -04:00
Tom Rini
4d24862848 arm: Remove mx53evk board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Jason Liu <jason.hui.liu@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:03:30 -04:00
Tom Rini
397a43dc56 arm: Remove pfla02 board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:03:30 -04:00
Tom Rini
a0cacddcaf arm: Remove zc5202 and zc5601 boards
These boards have not been converted to CONFIG_DM_MMC by the deadline.
Remove them.

Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:03:29 -04:00
Tom Rini
ddfc004009 arm: Remove xpress board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:02:03 -04:00
Tom Rini
b3b0680ec3 arm: Remove kc1 board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:01:24 -04:00
Tom Rini
6d426bb173 arm: Remove am3517_crane board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Nagendra T S  <nagendra@mistralsolutions.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:01:24 -04:00
Tom Rini
7db3958f07 arm: Remove omap3_ha board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Stefan Roese <sr@denx.de>
Cc: Tapani Utriainen <linuxfae@technexion.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:01:24 -04:00
Tom Rini
d137604c20 arm: Remove tricorder board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Thomas Weber <weber@corscience.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:01:24 -04:00
Tom Rini
96f599009a arm: Remove platinum_picon board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:01:10 -04:00
Tom Rini
da42646bf4 arm: Remove Broadcom Cygnus boards
These boards have not been converted to CONFIG_DM by the deadline.
Remove them.

Cc: Steve Rae <steve.rae@raedomain.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:01:09 -04:00
Tom Rini
938c174738 arm: Remove bcm23550_w1d board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Steve Rae <steve.rae@raedomain.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:01:09 -04:00
Tom Rini
0f6807e77b arm: Remove bcm28155_ap board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Steve Rae <steve.rae@raedomain.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:01:09 -04:00
Tom Rini
65a591f639 arm: Remove picosam9g45 board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Erik van Luijk <evanluijk@interact.nl>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:01:09 -04:00
Tom Rini
80c642f16d arm: Remove wb50n board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Ben Whitten <ben.whitten@lairdtech.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:01:09 -04:00
Tom Rini
3cb80c73a8 arm: Remove wb45n board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Ben Whitten <ben.whitten@lairdtech.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:01:09 -04:00
Tom Rini
d59bc09d82 arm: Remove bcm958712k board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:01:09 -04:00
Tom Rini
9ac8368071 arm: Remove s32v234evb board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Eddy Petrișor <eddy.petrisor@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:01:00 -04:00
Tom Rini
56124508ce arm: Remove secomx6quq7 board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:00:45 -04:00
Tom Rini
c6c26a05b8 arm: Remove vexpress_ca15_tc2 board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:00:12 -04:00
Tom Rini
4652bef1b6 arm: Remove apf27 board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Philippe Reynes <tremyfr@yahoo.fr>
Cc: Eric Jarrige <eric.jarrige@armadeus.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 07:59:35 -04:00
Tom Rini
be3dec48b0 arm: Remove ts4600 board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 07:59:35 -04:00
Tom Rini
0fa6bafa89 arm: Remove sc_sps_1 board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 07:59:34 -04:00
Tom Rini
b40186fc7e arm: Remove SANSA_FUZE_PLUS board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 07:59:34 -04:00
Tom Rini
539fba2c10 arm: Remove xfi3 board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 07:59:30 -04:00
Tom Rini
a80e03683b drivers: ata: Remove mvsata_ide driver
The mvsata_ide driver was due for DM conversion by v2019.07.  As that
has long passed, remove the driver and disable it in the boards which
had enabled it.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 07:59:30 -04:00
Tom Rini
34af2da9ad ppc: Remove MPC8349ITX board
This board relies on using CONFIG_LIBATA but does not enable CONFIG_AHCI.  The
deadline for this conversion was the v2019.07 release.  The use of CONFIG_AHCI
requires CONFIG_DM.  The deadline for this conversion was v2020.01.  Remove
this board.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 07:58:22 -04:00
Tom Rini
c861d21cba arm: Remove ot1200 board
This board relies on using CONFIG_LIBATA but does not enable CONFIG_AHCI.  The
deadline for this conversion was the v2019.07 release.  In order to
convert to using the DWC SATA driver under DM further migrations are
required.

Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2021-04-10 07:57:42 -04:00
Tom Rini
d8d3b77fc2 arm: Remove dms-ba16 board
This board relies on using CONFIG_LIBATA but does not enable CONFIG_AHCI.  The
deadline for this conversion was the v2019.07 release.  The use of CONFIG_AHCI
requires CONFIG_DM.  The deadline for this conversion was v2020.01.  Remove
this board.

Cc: Akshay Bhat <akshaybhat@timesys.com>
Cc: Ken Lin <Ken.Lin@advantech.com.tw>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 07:57:29 -04:00
Tom Rini
f9836dabd8 am57xx_hs_evm_usb: Enable AHCI and BLK
Enable the AHCI and BLK features to complete migration of various
drivers.

Cc: Andrew F. Davis <afd@ti.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 07:53:50 -04:00
Tom Rini
a61b538af8 ls1012aqds_tfa_SECURE_BOOT: Remove unused CONFIG_SCSI_AHCI
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 07:53:50 -04:00
Tom Rini
3f2e3c7845 Add rt-thread art-pi board support based on STM32H750 SoC
Add Engicam i.Core STM32MP1 SoM
 Add FIP header support for STM32programmer
 Update uart number when no serial device found for STM32MP1
 Remove board_check_usb_power function when ADC flag is not set
 Update SPL size limitation for STM32MP1
 Set soc_type, soc_pkg, soc_rev env variables for STM32MP1
 -----BEGIN PGP SIGNATURE-----
 
 iQJQBAABCgA6FiEEXyrViUccKBz9c35Jysd4L3sz/6YFAmBwTr0cHHBhdHJpY2Uu
 Y2hvdGFyZEBmb3NzLnN0LmNvbQAKCRDKx3gvezP/plSwD/9SAhxTYqAblFZqZmJj
 Lu+F5fwuXXd8S5LwqNeIKULv+UhJngClkE4HdjSl6T0yR10v6YkPNRDVj4+1gzBd
 wZizmCsnqqDW0QGsTO5AVo+oTwhX4RHkvxEF7BjOqtVuoMZGiozE53+29QORHTnZ
 +j8CYAeORf9wvGAi5y+Wr8ICqP6HwPJPNlta4S8iYC867BM38R9evBqynlaZaWPE
 8FhaXwbAj9ZR9ifCiO+7ObgfXGDT63ejCecjE+539m3FWlBrn+/AWLsg4zF037Dw
 DcV324pnVFP4AIOVsuc9hF7luAYctoXQcNHt1QbD3gmWqPQAgpH8Llfq5cMyudza
 /m/112Y7fuLxO3F14DzZSj5l3ims0XG56Yg7zBwN6exDPr3iWA4UwTSH9lRJDnBq
 aJyvLfAFAvz+X15oePjrQrVp7c+6MigeY2nmhVCWV53Yrl+/TnnekQXlHJ3TsHED
 bPW5/LarLge18uACTZvLzYruIvDSU3INPP1W0vUu7YMDwuEp21K1GSspN7yA0yDK
 nrWXxmYJGVWanAEvW//zuuqUhxtNjAb/qIQl0UgjFN9cDT5vJZ7oY3nWOwP+0V2a
 o+qrRxBTWSVliOShYpfjyHRsASRna2QLLUNQaBeoUqZBKNnFvuw4LZzmqNvV+Idj
 +XWRCiSDJnf1zRrMwFLvZZ+UTQ==
 =4VxR
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20210409' of https://source.denx.de/u-boot/custodians/u-boot-stm

Add rt-thread art-pi board support based on STM32H750 SoC
Add Engicam i.Core STM32MP1 SoM
Add FIP header support for STM32programmer
Update uart number when no serial device found for STM32MP1
Remove board_check_usb_power function when ADC flag is not set
Update SPL size limitation for STM32MP1
Set soc_type, soc_pkg, soc_rev env variables for STM32MP1
2021-04-09 13:10:59 -04:00
Tom Rini
92c4eb7ae3 Merge branch 'v2021.07-rc1' of https://github.com/lftan/u-boot 2021-04-09 13:10:38 -04:00
Tom Rini
a1e95e3805 u-boot-imx-20210409
-------------------
 
 - Secure Boot :
 	- HAB for MX8M / MX7ULP
 	- CAAM fixes
 - Fixes for imxrt1020
 - Fixes for USDHC driver
 - Fixes for Toradex (Colibri / Apalis)
 - Switch to DM for several boards
 	- mx23 olinuxo
 	- usbarmory
 	- marsboard / riotboard
 	- Gateworks GW Ventana
 - NXP upstream patches (LPDDR / CAAM / HAB)
 
 CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/7089
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCYHA8Xg8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76aVbQCfb0Z+N836ZSAodyLa0t6FSHgKqfYAnRdrWQAv
 MNlGOmmpfHENtE75eSnd
 =g48D
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20210409' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

u-boot-imx-20210409
-------------------

- Secure Boot :
	- HAB for MX8M / MX7ULP
	- CAAM fixes
- Fixes for imxrt1020
- Fixes for USDHC driver
- Fixes for Toradex (Colibri / Apalis)
- Switch to DM for several boards
	- mx23 olinuxo
	- usbarmory
	- marsboard / riotboard
	- Gateworks GW Ventana
- NXP upstream patches (LPDDR / CAAM / HAB)

CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/7089
2021-04-09 10:08:52 -04:00
Jagan Teki
0441b48570 board: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 7" OF
7" OF is a capacitive touch 7" Open Frame panel solutions with
- 7" AUO B101AW03 LVDS panel
- EDT, FT5526 Touch

MicroGEA STM32MP1 is a STM32MP157A based Micro SoM.

MicroDev 2.0 is a general purpose miniature carrier board with CAN,
LTE and LVDS panel interfaces.

MicroGEA STM32MP1 needs to mount on top of MicroDev 2.0 board with
pluged 7" OF for creating complete MicroGEA STM32MP1 MicroDev 2.0
7" Open Frame Solution board.

Linux dts commit details:

commit <1d278204cbaa> ("ARM: dts: stm32: Add Engicam MicroGEA STM32MP1
MicroDev 2.0 7" OF")

Add support for it.

Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-04-09 11:53:00 +02:00
Jagan Teki
fd4dc09a4c board: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 board
MicroDev 2.0 is a general purpose miniature carrier board with CAN,
LTE and LVDS panel interfaces.

Genaral features:
- Ethernet 10/100
- USB Type A
- Audio Out
- microSD
- LVDS panel connector
- Wifi/BT (option)
- UMTS LTE with sim connector (option)

MicroGEA STM32MP1 is a STM32MP157A based Micro SoM.

MicroGEA STM32MP1 needs to mount on top of this MicroDev 2.0 board
for creating complete MicroGEA STM32MP1 MicroDev 2.0 Carrier board.

Linux dts commit details:

commit <f838dae7afd0> ("ARM: dts: stm32: Add Engicam MicroGEA STM32MP1
MicroDev 2.0 board")

Add support for it.

Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-04-09 11:53:00 +02:00
Jagan Teki
b594ec89fb board: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0
Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose Carrier
board.

Genaral features:
- Ethernet 10/100
- Wifi/BT
- USB Type A/OTG
- Audio Out
- CAN
- LVDS panel connector

i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam.

i.Core STM32MP1 needs to mount on top of this Carrier board for
creating complete i.Core STM32MP1 C.TOUCH 2.0 board.

Linux dts commit details:

commit <6ca2898df59f> ("ARM: dts: stm32: Add Engicam i.Core STM32MP1
C.TOUCH 2.0")

Add support for it.

Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-04-09 11:53:00 +02:00
Jagan Teki
30edf40fa8 board: stm32: Add Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit
Engicam EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive
Evaluation Board.

Genaral features:
- LCD 7" C.Touch
- microSD slot
- Ethernet 1Gb
- Wifi/BT
- 2x LVDS Full HD interfaces
- 3x USB 2.0
- 1x USB 3.0
- HDMI Out
- Mini PCIe
- MIPI CSI
- 2x CAN
- Audio Out

i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam.

i.Core STM32MP1 needs to mount on top of this Evaluation board for
creating complete i.Core STM32MP1 EDIMM2.2 Starter Kit.

Linux dts commit details:

commit <adc0496104b6> ("ARM: dts: stm32: Add Engicam i.Core STM32MP1
EDIMM2.2 Starter Kit")

Add support for it.

Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-04-09 11:53:00 +02:00
dillon min
38ac6a1bb3 board: Add rt-thread art-pi board support
All these files are add for support rt-thread art-pi board
- add board/st/stm32h750-art-pi, defconfig, header support for u-boot

for more information about art-pi, please goto:
https://art-pi.gitee.io/website/

Signed-off-by: dillon min <dillon.minfei@gmail.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-04-09 11:53:00 +02:00
Trevor Woerner
52bbcc340a mx23_olinuxino: convert MMC to driver model
Convert the Olimex Olinuxino board's support for MMC to driver model following
Fabio Estevam's excellent example from:

	commit: 23013aa961:
	mx23evk: Convert to driver model

Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2021-04-08 23:59:50 +02:00
Trevor Woerner
123526e4a4 mx23_olinuxino: enable device tree
Add the dts file for the Olimex Olinuxino from the linux kernel, and enable
its use in this machine's defconfig.

Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2021-04-08 23:59:50 +02:00
Peter Robinson
dec7755c44 ARM: imx: udoo: convert to DM_ETH
Convert the UDOO board to use DM_ETH.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2021-04-08 20:29:54 +02:00
Peter Robinson
2d0401b118 ARM: imx: udoo: Convert block devices to DM
Enable DM block, DM MMC and DM SATA support on iMX6 Udoo
convert board code to match the DM support.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2021-04-08 20:29:54 +02:00
Peter Robinson
41a6890d3d ARM: imx: udoo: drop MTD config
The UDOO doesn't have any MTD storage so drop the config.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2021-04-08 20:29:54 +02:00
Peter Robinson
999f6bf50d ARM: imx: udoo: Enable OF_CONTROL and DM gpio/pin control
Enable OF_CONTROL and DM for gpio and pin control support
on the i.MX6 based Udoo boards.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2021-04-08 20:29:54 +02:00
Peter Robinson
05cd77611f ARM: embestmx6boards: convert the mars/riot boards to DM SPI
Enable DM_SPI and DM_SPI_FLASH on the mars/riot boards.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: "Eric Bénard" <eric@eukrea.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2021-04-08 20:29:54 +02:00
Peter Robinson
2668e28213 ARM: embestmx6boards: convert mars/riot boards to DM_ETH
Convert the boards to use DM_ETH.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: "Eric Bénard" <eric@eukrea.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2021-04-08 20:29:54 +02:00
Peter Robinson
ed3b1d9c8c ARM: embestmx6boards: convert mars/riot boards to DM_USB
Convert the marsboard/riotboard to use DM_USB.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: "Eric Bénard" <eric@eukrea.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2021-04-08 20:29:54 +02:00
Peter Robinson
c32d240f70 ARM: embestmx6boards: convert the mars/riot boards to DM_MMC
Convert the two Embest boards to use DM MMC.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: "Eric Bénard" <eric@eukrea.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2021-04-08 20:29:54 +02:00
Peter Robinson
10ce58c081 ARM: riotboard: Enable OF_CONTROL and DM gpio/pin control
Enable OF_CONTROL and DM for gpio and pin control support
on the i.MX6D based riotboard.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: "Eric Bénard" <eric@eukrea.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2021-04-08 20:29:54 +02:00
Peter Robinson
f3bd944817 ARM: embestmx6boards: merge the riotboard's configs together
It doesn't make much sense to have two separate configs for
the riotboard so let's merge the SPL config into the main one
for less duplication.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: "Eric Bénard" <eric@eukrea.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2021-04-08 20:29:54 +02:00
Peter Robinson
b5c6019dfc ARM: marsboard: Enable OF_CONTROL and DM gpio/pin control
Enable OF_CONTROL and DM for gpio and pin control support
on the i.MX6Q based embestmx6boards marsboard.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: "Eric Bénard" <eric@eukrea.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2021-04-08 20:29:54 +02:00
Adam Ford
8166bb2428 configs: imx8mn_beacon: Enable QSPI Support
There is a QSPI chip connected to the FSPI.  Enable the defconfig
to support it.

Signed-off-by: Adam Ford <aford173@gmail.com>
2021-04-08 20:29:53 +02:00
Peter Robinson
f980299004 ARM: board: usbarmory: Convert to OF_CONTROL and DM
Convert usbarmory to OF_CONTROL and DM for gpio, pin
usb support on the i.MX53 based usbarmory.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: Andrej Rosano <andrej@inversepath.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2021-04-08 20:29:53 +02:00
Tim Harvey
ca3ac1e32a imx: ventana: enable dm for SPI
Enable driver model for SPI which allows us to remove the iomux
and init.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-04-08 20:29:53 +02:00
Tim Harvey
777f333c37 imx: ventana: enable dm for MTD and NAND
Enable driver model for MTD and NAND support allowing us to remove
the iomux, init, and most of the static configuration.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-04-08 20:29:53 +02:00
Tim Harvey
19a387f85d imx: ventana: enable dm support for MMC and SATA
Enable driver model support for MMC and SATA.

Note that DM_MMC requires aliases for your mmc devices so
they are added to the dts. Linux does not support enumerating mmc
devices by alias so these are not present in the Linux dts.

Note that we still need board_mmc_init() and board_mmc_getcd() for
not DM SPL to support MMC.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-04-08 20:29:53 +02:00
Tim Harvey
72c46327f0 imx: ventana: enable dm support for USB
Enable dm support for USB (which also requires dm support for fixed
regulators used for vbus enable) and remove usb iomux which is no
longer needed.

We can remove the handling of otgpwr_en gpio as this is defined in
dt as usbotg vbus-supply but we need to keep the handling of
USB_HUB_RST# for boards that have a USB HUB as that isn't defined in
the dt's currently.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-04-08 20:29:53 +02:00
Tim Harvey
ee025c13b2 imx: ventana: add pinctrl and remove unneeded UART init and config
Once the IMX6 pinctrl driver is added UART is fully using driver mode
so we no longer need to config and initialize it.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-04-08 20:29:53 +02:00
Tim Harvey
d863d05439 imx: ventana: convert U-Boot to OF_CONTROL using FIT image
In preparation for dm conversion convert to OF_CONTROL by adding FIT image
support and multi dtb.

Add a board_fit_config_name_match to match the dtb based off of EEPROM
model.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-04-08 20:29:53 +02:00
Peng Fan
1e4ed2d69d imx8mp-evk: switch to use binman
Use binman to pack images

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08 20:29:53 +02:00
Peng Fan
d6afc6b3a0 imx8mn-evk: switch to use binman
Use binman to pack images.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08 20:29:53 +02:00
Peng Fan
353dfe4b43 imx8mn-ddr4-evk: switch to use binman
Use binman to pack images

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08 20:29:53 +02:00
Peng Fan
8996e6b7c6 imx8mm_evk: switch to use binman to pack images
Use binman to pack images

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08 20:29:53 +02:00
Tom Rini
f6127db8cc Merge https://source.denx.de/u-boot/custodians/u-boot-riscv
- Watchdog, Unleashed and Icicle improvements
2021-04-08 07:33:14 -04:00
Siew Chin Lim
cdca986070 arm: socfpga: Enable FIT signature with crc32 for SOC64 devices
Add signature with crc32 value for all images in binman node for FIT
image in device tree. And, enable FIT signature checking for Stratix10
and Agilex ATF and VAB sdmmc boot.

Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
2021-04-08 17:29:13 +08:00
Bin Meng
e9b62617fa riscv: mpfs-icicle-kit: Increase SYS_MALLOC_F_LEN
The RISC-V architecture default value of CONFIG_SYS_MALLOC_F_LEN
(0x1000) would not provide enough memory for devices like mpfs
clock and ns16550 serial to bind well before relocation.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Padmarao Begari <padmarao.begari@microchip.com>
Tested-by: Padmarao Begari <padmarao.begari@microchip.com>
2021-04-08 15:37:29 +08:00
Bin Meng
ae2d9506a3 riscv: sifive: Rename fu540 board to unleashed
In preparation to add SiFive Unmatched board support, let's rename
the existing fu540 board to unleashed.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-04-08 15:37:29 +08:00
Heinrich Schuchardt
be5c442a15 configs: EXT4, FAT, hush shell, env on S-mode MAIX
* enable storing the environment in the SPI flash
* enable EXT4 and FAT file system
* enable hush shell
* run k210_bootcmd as default boot command

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
2021-04-08 15:37:28 +08:00
Peng Fan
4e805c197b imx8mn: Add LPDDR4 EVK board support
Add support for iMX8MN LPDDR4 EVK board which uses 2GB LPDDR4 and
PCA9450B PMIC.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08 09:18:29 +02:00
Ye Li
48ddafd9a4 imx8mm_evk: Switch to new imx8mm evk board
Update PMIC to use PCA9540, the legacy board not supported by NXP

Signed-off-by: Ye Li <ye.li@nxp.com>
2021-04-08 09:18:29 +02:00
Harm Berntsen
b5293df17a configs: sheevaplug: enable driver-model based MMC
The non-dm MMC driver has been converted to the driver model. The
sheevaplug was using the non-dm driver and this commit enables the new
driver.

Signed-off-by: Harm Berntsen <harm.berntsen@nedap.com>
Reviewed-by: Stefan Roese <sr@denx.de>
CC: Prafulla Wadaskar <prafulla@marvell.com>
CC: Stefan Roese <sr@denx.de>
CC: Tom Rini <trini@konsulko.com>
2021-04-08 08:50:52 +02:00
Phil Sutter
a770159f88 arm: mvebu: ds414: Auto-populate env if appropriate
Define a misc_init_r() which calls "syno populate_env" if the
environment seems incomplete (or default), indicated by missing
"ethaddr" variable. With this in place, no random MAC address fallback
is needed anymore.

Signed-off-by: Phil Sutter <phil@nwl.cc>
2021-04-08 08:50:41 +02:00
Phil Sutter
e471ddf0f3 arm: mvebu: board/Synology: Unify legacy kernel support
Move the relevant bits from ds109.{c,h} into common/ and adjust the code
to fit both DS109 and DS414. Moreover:

* Introduce syno_board_id() which translates CONFIG_MACH_TYPE into the
  expected board ID tag value.

* Properly initialize isusbhost, mac and mtu fields from env variables.

* Set the right bootargs/bootcmd to correctly boot legacy kernel out of
  the (DS414) box. Getting the ramdisk location right is a bit tedious.

Cc: Walter Schweizer <swwa@users.sourceforge.net>
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-04-08 08:50:17 +02:00
Phil Sutter
c57f920504 arm: mvebu: configs: ds414: Enable XHCI_PCI by default
With the recent fixes in pci_mvebu and xhci-pci drivers, the two rear
USB3 ports are finally usable and accessing them no longer hangs the
system.

Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-04-08 08:50:12 +02:00
Marek Behún
d86609baab arm: mvebu: turris_omnia: Enable CMD_FS_UUID
This command can be useful for U-Boot scripts.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Cc: Pali Rohár <pali@kernel.org>
Acked-by: Pali Rohár <pali@kernel.org>
2021-04-08 08:44:51 +02:00
Marek Behún
33691d9c82 arm: mvebu: turris_omnia: Enable CMD_WDT
This command can be sometimes used for debugging.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Cc: Pali Rohár <pali@kernel.org>
Acked-by: Pali Rohár <pali@kernel.org>
2021-04-08 08:44:51 +02:00
Marek Behún
1972d58e97 arm: mvebu: turris_omnia: Enable DM_RTC and RTC_ARMADA38X
With this the date command is available on Turris Omnia.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Cc: Pali Rohár <pali@kernel.org>
Acked-by: Pali Rohár <pali@kernel.org>
2021-04-08 08:44:51 +02:00
Tom Rini
02395fec00 Merge tag 'mmc-2021-4-6' of https://source.denx.de/u-boot/custodians/u-boot-mmc
Update hwpartition usage
Check bootbus's arguments
workaround for erratum A-011334 for fsl_esdhc driver
add pulse width detection workaround for fsl_esdhc driver
Use alias num before checking mmc index when creating device
2021-04-06 22:42:55 -04:00
Tom Rini
1883652c8e - Add MMIO MDIO mux driver
- Add Amlogic G12A MDIO mux driver
 - Add DM_MDIO support for designware ethernet driver
 - Add Amlogic Meson8b and later designware ethernet glue driver
 - Switch all amlogic boards to Amlogic designware ethernet glue driver
 - Switch all amlogic boards to DM_MDIO when necessary
 - Remove all static ethernet setup code
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAmBsLu8ACgkQd9zb2sjI
 SdFj4RAArL8OHCGzyAXrV95fnOnl76koOFnJJ0q6PREwvLWQh3GMpN4CBYtAn95a
 nbakXGN30pHlprrRrYi8nsGHWJX2MW1k8hDWGUJ4f+r2AuvCxMT7h3CHbKY0/pKZ
 h8s7Kwy1ze53ljAbQBUnF3anzYJFPpX3nvjbNo2o5ao0gCUNilEuz1RVn2R72v8R
 kp1iZb0bBhMN3mmNeOs670oXyDoRtX4eWyhbAdrTDhofxTvxfRlQJQrxJ6/I90ex
 IueCsRaT40vl9B5I+JJsanJFDPUTFeZIAc/6DchqPVlXxQjLYP/RjUIxaZbAbnFc
 vyXSWYhoK4GAmgNmXzL00VUVLfKvWvMVMncSgRKRqVY+YBkmoFrP4sYbFrZAPqsB
 yaUoWWnuKurWGRiqbEOlvK+AmQ7So0wWLE/cImmHaadpUDFow3JseeMdZphBdaOp
 4BevvSUNE2k8LazXKyPPlm73Po7uDZmTHYc9ADemBjIj0wvdROvgTdbOdtCAPwnv
 sNVP08l51fskueFYKAkWg1/5hu9YEqzb3C+n9QyZoDNmKaGxQ102HH2gHdXkFqBD
 EciaThsIogUOxYzz7zwU4a44bzzQBuh+yp6C4Ixxe9tOyFyknNppontMUUm41Blk
 HzOvBZjzxqpQOnuVfl1k7xORFXGehCnxwLhZvDIoLYhaqFzgLUc=
 =uQEZ
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20210406' of https://source.denx.de/u-boot/custodians/u-boot-amlogic

- Add MMIO MDIO mux driver
- Add Amlogic G12A MDIO mux driver
- Add DM_MDIO support for designware ethernet driver
- Add Amlogic Meson8b and later designware ethernet glue driver
- Switch all amlogic boards to Amlogic designware ethernet glue driver
- Switch all amlogic boards to DM_MDIO when necessary
- Remove all static ethernet setup code
2021-04-06 08:37:28 -04:00
Tom Rini
7168bcdefc Merge https://source.denx.de/u-boot/custodians/u-boot-marvell
- Enhance WDT handling (starting / stopping) and introduce
  CONFIG_WATCHDOG_AUTOSTART to allow disabling of autostart of
  the WDT (Pali)
2021-04-06 08:37:06 -04:00
Tom Rini
779786dac3 ENOSYS clean-up
Minor dtoc improvements
 Convert CONFIG_MISC_INIT_F to Kconfig
 Allow unit tests to run on any board
 pylibfdt build-rule fix
 -----BEGIN PGP SIGNATURE-----
 
 iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAmBr+AgRHHNqZ0BjaHJv
 bWl1bS5vcmcACgkQfxc6PpAIrebnqQf/dZUk4cpj4q29icFJhAhG3wUkzKdKywWu
 wOwHPIaUIetytpjwKTbkv0cUdel5Jhp9mvnJ2O5cRUZlVdgCH+lEQmFiq1O74Jf5
 IwYBN74xZuP7+rno3ZxuKhjj2ixbpeg2A5R/o7gaevIgtu4vCK71qrj3y+unjnnt
 Rd5BGaVzouMya0lS9cdkrzE1vmuLXs7ZJBvKdppaNda0VScJj+JP3NqooFKRKPU+
 OeyblmtfL5lGOXFdY7Wfjg0pzv5L8fJxDaYDxf6iRWWG/X6RO6zV26MWAo28Ga+J
 E3fuvl0mBqr1eAg3Cf17j4s9gRZv1tMtS6Mol1scIcBrldalVFA44g==
 =x75X
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-6apr21' of https://source.denx.de/u-boot/custodians/u-boot-dm

ENOSYS clean-up
Minor dtoc improvements
Convert CONFIG_MISC_INIT_F to Kconfig
Allow unit tests to run on any board
pylibfdt build-rule fix
2021-04-06 08:36:11 -04:00
Michael Walle
1fc9346af4 board: sl28: enable HS400 mode again
Now that it is working reliable on the LS1028A SoC, reenable support for
it.

Signed-off-by: Michael Walle <michael@walle.cc>
2021-04-06 18:36:11 +08:00
Neil Armstrong
888422ea17 configs: meson: use Designware glue driver for Amlogic Meson8b & later SoCs
Use the proper Synopsys DWMAC Meson8b glue to handle the ethernet link type.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-04-06 11:10:29 +02:00
Neil Armstrong
1f636d8cb1 configs: update Amlogic Meson G12A, G12B & SM1 configs for MDIO MUX
Use DM_MDIO and the new G12A MDIO MUX driver for G12A, G12B & SM1 boards.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-04-06 11:10:29 +02:00
Neil Armstrong
6950ba4680 configs: update Amlogic Meson GXL & GXM config for MDIO MUX
Use DM_MDIO and the new MMIOREG MDIO MUX driver for GXL & GXM board.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-04-06 11:10:29 +02:00
Pali Rohár
88965fef6e arm: mvebu: Espressobin: Enable watchdog support but do not start it
Espressobin had disabled watchdog support (CONFIG_WDT) because older stable
Linux kernel versions (which are used by current stable OpenWRT and Debian
versions) do not have support for Armada 3700 watchdog driver. Therefore
they are not able to periodically kick watchdog so Espressobin enter into
boot loop.

This change enable CONFIG_WDT, CONFIG_WDT_ARMADA_37XX and CONFIG_CMD_WDT
options which add support for U-Boot 'wdt' command. And unset new
CONFIG_WATCHDOG_AUTOSTART option which cause that watchdog is not
automatically started by U-Boot during init phase, like when CONFIG_WDT
option is not set at all.

So with this change, U-Boot on Espressobin would have working 'wdt' command
which can be used from boot scripts (e.g. for enabling watchdog prior new
Linux booting kernel). But default behavior of watchdog status stays
unchanged, U-Boot does not start watchdog on Espressobin during its init
phase.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-04-06 10:47:32 +02:00
Simon Glass
48f45455bf Convert CONFIG_MISC_INIT_F to Kconfig
This converts the following to Kconfig:
   CONFIG_MISC_INIT_F

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-04-06 16:33:19 +12:00
Tom Rini
472fd5a35a Merge tag 'rockchip-for-v2021.07' of https://source.denx.de/u-boot/custodians/u-boot-rockchip
- Fix rk3368 lion board support;
- Fix px30 odroid-go2 board support;
- Add rk3399 NanoPi R4s and NanoPi M4B board support;
2021-04-05 22:39:10 -04:00
Tom Rini
90eba245a6 Merge branch 'next' 2021-04-05 11:29:57 -04:00
Fabio Estevam
17bc2cf89b imx8mn_ddr4_evk: Allow booting the kernel by default
Currently it is not possible to boot Linux from the SD card
by default.

Make the necessary adjustments to allow it.

Reported-by: Peter Bergin <peter@berginkonsult.se>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Andrey Zhizhikin <andrey.z@gmail.com> # imx8mn_ddr4_evk
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2021-04-05 08:08:56 -04:00
Tom Rini
db8b46120a Xilinx changes for v2021.07
net:
 - Fix gem PCS support
 
 spi:
 - Small trivial fixes
 
 zynq:
 - Enable time/timer commands
 - Update bitmain platform
 - Several DT changes
 
 zynqmp:
 - Update clock driver
 - mini config alignments
 - Add/update psu_init for zcu208/zcu216/zc1275
 - Several DT changes
 - Enable efi debug command (also for Versal)
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCYGRy+AAKCRDKSWXLKUoM
 IUN9AKCQHHdbKIciyhucUj5ThwT3CDaUswCeLQkRB1SrM6E8k6KkErWEA+xOxsU=
 =fIEs
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2021.07' of https://source.denx.de/u-boot/custodians/u-boot-microblaze into next

Xilinx changes for v2021.07

net:
- Fix gem PCS support

spi:
- Small trivial fixes

zynq:
- Enable time/timer commands
- Update bitmain platform
- Several DT changes

zynqmp:
- Update clock driver
- mini config alignments
- Add/update psu_init for zcu208/zcu216/zc1275
- Several DT changes
- Enable efi debug command (also for Versal)
2021-03-31 09:47:30 -04:00
Michal Simek
c5465684b9 xilinx: Enable efi debug command
Enable EFI debug command to be able to setup various efi variables to avoid
software like grub.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-03-30 12:03:25 +02:00
Michal Simek
19eb739a20 ARM: bitmain: Enable saving variables to SD card
Board has NAND and SD interfaces which can be used for saving variables
too.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-03-30 12:03:25 +02:00
Michal Simek
060fc5c8a0 ARM: bitmain: Enable legacy u-boot format
Still legacy formats are used that's why enable them by default.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-03-30 12:03:25 +02:00
Ashok Reddy Soma
8600dd8ad4 arm64: zynqmp: Increase size of malloc pool
size of malloc() pool for use before relocation is not sufficient
for ZynqMP mini u-boot with emmc configuration. Increase it to 4K.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-03-30 12:03:24 +02:00
Ashok Reddy Soma
2df44bbbb5 xilinx: zynq: Enable time and timer commands
Enable time command to get the elapsed time and timer commands.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-03-30 12:03:24 +02:00
Alexandre Vicenzi
a99d70c180 board: dts: rockchip: Add NanoPi M4B
Add initial support for NanoPi M4B, a minor revision of
the original NanoPi M4.

Commit details of rk3399-nanopi-m4b.dts sync from Linux 5.12-rc4:
"arm64: dts: rockchip: Add NanoPi M4B board"
(sha1: c7b03115003f7f337ab165542cee37148cf30a8a)

Signed-off-by: Alexandre Vicenzi <alexandre.vicenzi@suse.com>
Reviewed-by: Kever Yang <kever.yang@rock-cihps.com>
2021-03-30 16:53:00 +08:00
Xiaobo Tian
b69b9f3f54 arm64: rk3399: Add support NanoPi R4s
NanoPi R4s is SBC base on Rockchip RK3399 hexa-core processor with
dual-Core Cortex-A72 and Mali-T864 GPU with 4GiB(LPDDR4) of RAM, SD card support,
including 2 gigabit ethernet(RTL8211E 1Gbps - RTL8111H 1Gbps) and 2 USB 3.0 port.
port.It also has two GPIO headers which allows further peripherals to be used.

The devicetree file is taken of the rk3399 nanopi4 Linux kernel [1].

[1] e7a0959082

Signed-off-by: xiaobo <peterwillcn@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-03-30 16:53:00 +08:00
Roger Pau Monné
253b151d48 odroid-go2: fix default FDT file path
The path in the Linux kernel dts directory is
rockchip/rk3326-odroid-go2.dtb.

That also seems to match the FDT path set on other boards (ie:
rock64-rk3328 for example).

Signed-off-by: Roger Pau Monne <royger@FreeBSD.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-03-30 16:53:00 +08:00
Roger Pau Monné
4e456fb636 odroid-go2: do not disable EFI
Remove the unset of the EFI loader, it's possible for U-Boot to
provide a EFI environment on this board, and it's also required by
the FreeBSD loader which mandated EFI on Aarch64.

Signed-off-by: Roger Pau Monné <royger@FreeBSD.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-03-30 16:53:00 +08:00
Peter Robinson
98c7962291 rockchip: rk3399: rock960: explicitly disable SPI flash
The Rock960 doesn't have SPI flash on-board, but the bits
get enabled by default which means when booting we get
some errors. Explicitly disable it to stop the errors.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-03-30 16:53:00 +08:00
Heiko Stuebner
439fdaa26a rockchip: lion: update board defconfig
Adds the needed target option and drivers needed for correct
bringup.

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-03-30 16:53:00 +08:00
Heiko Stuebner
ba421b96a2 rockchip: rk3368: sync down rk3368-lion board devicetree from Linux
This brings the actual rk3368-lion devicetree files from Linux 5.10
instead of using something separate.

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-03-30 16:53:00 +08:00
Heiko Stuebner
ca7bb9dde7 rockchip: rk3368: move STACK_R_ADDR address and into Kconfig
With the STACK_R_ADDR at 0x600000 (6MB) we're competing with
with the loading address of either u-boot or atf parts, so move
that away to 0x4000000 (64MB) similar to rk3399.

Only lion currently sets that at all but not sheep the second
rk3368 board, so just move that to the Kconfig for rk3368 similar
to rk3399 as well.

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-03-30 16:53:00 +08:00
Roger Pau Monné
19c6b8cf8b odroid-go2: remove setting SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR
Using a non-default SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR setting makes the
resulting u-boot-rockchip.bin unbootable, as it gets stuck after SPL.
Removing the setting from the defconfig allows U-Boot to load
successfully.

Signed-off-by: Roger Pau Monné <royger@FreeBSD.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-03-30 16:52:59 +08:00
Tom Rini
1057b1be75 Prepare v2021.04-rc5
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAmBiRbMACgkQFHw5/5Y0
 tyz0KAv/T8glQGL6L2CYeLuwbs9tndQoaH2YNb3teNUJrqehBleJAQ6ubHP30d87
 rHrokJ4Zu3TC15sACrK4GOMvsAVkeCuU/jIqFJA4ieDZr8g7yfUMOZMsDiIFdd36
 Rdmi71Jtek/csyS5BfcUUYoXVbUCGQ8yAx7z0VrK0sqsqZYYJNwPmqgkR8U2ulNb
 FiLxwamFwH7+bsvcvHajO1dOyko0zR7GTisf/fOgmlHuF3BldqG4SDcNd528uEWb
 r3fXs2Ut6IaC/beCnmKUPVG3ZjdPtb+T230rRRhUOfjTwqR7SzXp5bTyzdgyw3gU
 rOgfi/mAGQPPG2E2fzPz0JCI1irbnkSE2fVJ4epaVUCoHIEsQQdy034aD3qLcHFY
 65ihEpRvCM7s9jfKX8XeIG4rKFB4i60TX5orzdMvx7wV3rxmPE9qQmF9lkD+fEA+
 TPuFtkjGmluSe+xWBVK7+6xuF6rcLEbNXuFWRi3qMSMgH8rtGfeJRonusOGPolwC
 jQ1T7szW
 =UJ/O
 -----END PGP SIGNATURE-----

Merge tag 'v2021.04-rc5' into next

Prepare v2021.04-rc5
2021-03-29 18:00:21 -04:00
Simon Glass
529d5f96cf cpu: Rename SPL_CPU_SUPPORT to SPL_CPU
The _SUPPORT suffix is from an earlier time and interferes with use of
the CONFIG_IS_ENABLED() macro. Rename the option to drop the suffix.

Tidy up the TODO that prompted this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-27 15:04:31 +13:00
Simon Glass
26c69078c9 x86: coral: Drop ACPI properties from of-platdata
We don't use these in TPL or SPL, so drop them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-26 17:03:09 +13:00
Simon Glass
424994c48f sandbox: Create a new sandbox_noinst build
Move sandbox_spl over to use OF_PLATDATA_INST. Create a new board to
test the case when this is not enabled, since we will be keeping that
code around for several months and want to avoid regressions.

Skip the dm_test_of_plat_dev() test since driver info is not available
for OF_PLATDATA_INST.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-26 17:03:09 +13:00
Simon Glass
3a825d3fa7 Revert "sandbox: Disable I2C emulators in SPL"
With recent changes this can be supported again. Add it back.

This reverts commit d85f2c4f29.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-26 17:03:08 +13:00
Simon Glass
abaed70990 sandbox_spl: Increase SPL malloc() size
The test framework reinits driver model tests before running each test.
Since malloc_simple does not support free(), this eventually runs out of
memory.

Fix it for now by increasing the space to 32KB.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-03-26 17:03:08 +13:00
Kuldeep Singh
a7c532f94c configs: ls1028a: Correct CONFIG_ENV_SECT_SIZE
LS1028A-RDB/QDS has Micron "mt35xu02g" nor flash of size 256M with 128K
sector size. Correct CONFIG_ENV_SECT_SIZE value to 128K.

Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-23 18:06:07 +05:30
Kuldeep Singh
6712856469 configs: ls1028aqds: Move CONFIG_SPI_FLASH_* definitions to defconfig
LS1028A-QDS has CONFIG_SPI_FLASH_SST and CONFIG_SPI_FLASH_EON defines
present in header. Move these entries from header to defconfigs.

Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-23 18:06:07 +05:30
Kuldeep Singh
72655b254b configs: ls1028a: Unset CONFIG_SPI_FLASH_SPANSION
There is no Spansion flash on LS1028A-RDB/QDS boards.
Unset CONFIG_SPI_FLASH_SPANSION option for both the boards.

Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-23 18:06:07 +05:30
Kuldeep Singh
3fadc80cd4 configs: lx2160a: Unset CONFIG_SPI_FLASH_SPANSION
There is no Spansion flash on LX2160A-RDB/QDS boards.
Unset CONFIG_SPI_FLASH_SPANSION option for both the boards.

Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-23 18:06:07 +05:30
Chris Packham
805c525b08 powerpc: t2080rdb: Enable RTC support
The T2080RDB has a ds1339 on i2c0. Add this to the devicetree and enable
the relevant support in the configs.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-23 18:06:07 +05:30
Weijie Gao
8ec9aa6a30 configs: mt7622: enable debug uart for mt7622_rfb_defconfig
Enable debug uart for mt7622_rfb_defconfig

Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2021-03-20 16:24:27 -04:00
Weijie Gao
f4f478be4c board: mt7629: enable compression of u-boot to reduce the size of final image
This patch makes use of the decompression mechanism implemented for mt7628
previously to reduce the total image size. Binman will be also removed.

Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2021-03-20 16:24:27 -04:00
Weijie Gao
e21599ed00 configs: mt7622: use ARMv8 Generic Timer instead of mtk_timer
It's better to use the generic timer which is correctly initialized by
the ATF. The generic timer has higher resolution than the mtk_timer.

Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2021-03-20 16:24:27 -04:00
Fabien Parent
e96bedf146 board: Add MT8183 pumpkin board support
Add the MT8183 pumpkin board support.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
2021-03-20 16:24:27 -04:00
Fabien Parent
86e07d59ee board: mediatek: rename pumpkin board into mt8516
More than one pumpkin board has been made with different MediaTek SoCs.
Rename the pumpkin board to follow the naming convention of all
other MediaTek boards and also to not be confusing when other pumpkin
boards will be added in follow-up commits.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
2021-03-20 16:24:26 -04:00
Michael Walle
73e553a280 board: sl28: disable HS400 mode
Since commit 8ee802f899 ("mmc: fsl_esdhc: make sure delay chain locked
for HS400") HS400 mode is unreliable on LS1028A SoCs. Some workarounds are
missing for this SoC.

Disable HS400 mode for now.

Signed-off-by: Michael Walle <michael@walle.cc>
2021-03-19 10:35:19 -04:00
Lad Prabhakar
9e346340d7 board: silinux: Enable recovery SPL for EK874 board
Enable building SPL for EK874 board which is based on R8A774C0 SoC.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
2021-03-16 20:09:30 +01:00
Lad Prabhakar
07148c1899 arm: rmobile: Add Silicon Linux EK874 board support
The EK874 development kit from Silicon Linux is made of CAT874 (the main
board) and CAT875 (the sub board that goes on top of CAT874).

This patch adds the required board support to boot Si-Linux EK874 board
based on R8A774C0 SoC.

DTS files apart from r8a774c0-ek874-u-boot.dts and r8a774c0-u-boot.dtsi
have been imported from Linux kernel 5.11 commit f40ddce88593
("Linux 5.11").

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
2021-03-16 20:09:29 +01:00
Biju Das
5be85de6a8 arm: rmobile: Add HopeRun HiHope RZ/G2H board support
The HiHope RZ/G2H board from HopeRun consists of main board
(HopeRun HiHope RZ/G2H main board) and sub board(HopeRun
HiHope RZ/G2H sub board). The HiHope RZ/G2H sub board sits
below the HiHope RZ/G2H main board.

This patch adds the required board support to boot HopeRun HiHope
RZ/G2H board.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
2021-03-16 20:09:29 +01:00
Biju Das
dca070c382 arm: rmobile: Add HopeRun HiHope RZ/G2N board support
The HiHope RZ/G2N board from HopeRun consists of main board
(HopeRun HiHope RZ/G2N main board) and sub board(HopeRun
HiHope RZ/G2N sub board). The HiHope RZ/G2N sub board sits
below the HiHope RZ/G2N main board.

This patch adds the required board support to boot HopeRun HiHope
RZ/G2N board.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
2021-03-16 20:09:29 +01:00
Biju Das
b650c83825 arm: rmobile: Add HopeRun HiHope RZ/G2M board support
The HiHope RZ/G2M board from HopeRun consists of main board
(HopeRun HiHope RZ/G2M main board) and sub board(HopeRun
HiHope RZ/G2M sub board). The HiHope RZ/G2M sub board sits
below the HiHope RZ/G2M main board.

This patch adds the required board support to boot HopeRun HiHope
RZ/G2M board.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
2021-03-16 20:09:29 +01:00
Tom Rini
22fc991daf Prepare v2021.04-rc4
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAmBPhiUACgkQFHw5/5Y0
 tywChgv/RYpdSKrD5s4kCJnImfOwDznESj/CqAQK3Au5zviq7qXRrgxyTKv2e1wM
 W51vUBd0cE1YTACXqbr92wSSyqoTthLqd57KQgVele5uC2dvkqVTSvjPOUwtyIbQ
 BTPkoQnHPn30AILRdPjpEdBGfZhJDDtJFdQopn6h4GjEjPKVH8Wx1Dd+V6SD5f20
 WiksUjgdjMr1AmORY+LdwwJO8FZrGGPYgs8CDtiqxmCSwh3d7kUFFTT+G23BZdo7
 M+81+1uIUaW2Bolds7ZTPrrjr8bPwkWoTqNYhUB4bNPLp72gwnjM1rtU1X3hyiJM
 MdxSBimLHUOYPihfeSYCHSUrJaQFAAEFkuzWfZN1fgoswKEZQIVVVTzT/TomTyqf
 1DIXD+0HpXGKgVLW/Nkpl4D+UFjR865XI4kiuDxddjKI7bGbvDlbZ/k3PNelD7op
 umUswHnC3OTSw/g+A9VH/zf1rMFNLfu++vD7XJtdoWlcsl6x6/6Fh75tuC6K/X0K
 caPmehD3
 =ENym
 -----END PGP SIGNATURE-----

Merge tag 'v2021.04-rc4' into next

Prepare v2021.04-rc4
2021-03-15 12:15:38 -04:00
Tom Rini
6ad0769c8e configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-03-15 10:50:47 -04:00
Tom Rini
23986be8ca Merge tag 'ti-v2021.04-rc4' of https://source.denx.de/u-boot/custodians/u-boot-ti
- Fix boot for da850-evm and omap3_logic
- Optimize SPL size for am65x boards
2021-03-15 08:43:29 -04:00
Tom Rini
e8a10a02bd - Add WATCHDOG_RESET() in MTD framework and STM32 QSPI driver
- stm32mp1_trusted_defconfig rely on SCMI support
 - Remove the nand MTD configuration for NOR boot in stm32mp1 board
 - STM32programmer update
 - Bsec: manage clock when present in device tree
 - stm32mp15: move bootdelay configuration in defconfig
 - Update for stm32 dsi and dw_mipi_dsi
 - STM32 MCU's cleanup
 - Fix compilation issue depending on SYS_DCACHE_OFF and SYS_ICACHE_OFF flags
 - Update stm32mp1 doc
 -----BEGIN PGP SIGNATURE-----
 
 iQJQBAABCgA6FiEEXyrViUccKBz9c35Jysd4L3sz/6YFAmBLfA8cHHBhdHJpY2Uu
 Y2hvdGFyZEBmb3NzLnN0LmNvbQAKCRDKx3gvezP/pkNnD/4hQrwBdaJMz9YXL4Tp
 0W7kpCcTkG+gINY06BONNnKzBHq62SkWMo/lw9iF0nlcNKSOHzrz6ttm+e54ngs0
 qe/dn0yjgImDfr5p5JRMTG1m7/XwQpucZ8wowSZAwt5f/DDh9eta9AyST0ev+iXI
 Eqgbk5HsF2OCOK6h74FJidZUdLMLw+uQkIwPhglx3ZaxxFfXHAdWtXtJ9Fky2adU
 BC0PltvJ6KYl1LTUGCQvrCST1sNe1PXPHrcsUpsQnqUSZ65tGKgeH2On9Exsw6cE
 eA5v0aiQSMmAH2pYXrJwxhSW9b03yt3NdBQd09Du2YUuFe7yZeoWIFy8mM9jRaov
 QDe88aJ9ZjxB+TvYQPToEL0EIyBGkN3HnX05BtKzKLf+E2+wP6gEf/6Sob7fBf6n
 3n2Eud0COfe06hNiocYOHm8n/8bZxdmuEgMA8LU0PZETbH33NlvJtrjyBxY4OHOV
 G+RG6J8idpVWWQ69g2TqfsVhXSjF893nvLOu0+KjuNrZWG4BVxGjylVUSvayk7bG
 TI++ZKlbdvJGweZ3uUPcNLH4VaX47P/nZS/6vX1uL7NtRNvv3jLHN5z4t6zKI9rh
 3iTJxxVv3zilWcY1WsoSdUvK56RTubnNwUlpjriabdRwMDjMN0isL9N06PvOELoi
 jU1IkKBLtMvPbb2XfLRIjvQjTQ==
 =nIJc
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20210312' of https://source.denx.de/u-boot/custodians/u-boot-stm

- Add WATCHDOG_RESET() in MTD framework and STM32 QSPI driver
- stm32mp1_trusted_defconfig rely on SCMI support
- Remove the nand MTD configuration for NOR boot in stm32mp1 board
- STM32programmer update
- Bsec: manage clock when present in device tree
- stm32mp15: move bootdelay configuration in defconfig
- Update for stm32 dsi and dw_mipi_dsi
- STM32 MCU's cleanup
- Fix compilation issue depending on SYS_DCACHE_OFF and SYS_ICACHE_OFF flags
- Update stm32mp1 doc
2021-03-15 08:43:19 -04:00
Lokesh Vutla
f72edfddde configs: am65x_evm_r5: Enable checks for spl and stack sizes
Enable relevant configs that checks for the size of image and stack:

 BSS: 3KB
 Initial MALLOC: ~22KB
 Initial Stack: 8K
 SPL Image size can be: ~215KB

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-03-15 12:13:44 +05:30
Adam Ford
136284a3cf configs: omap3_logic: Enable CONFIG_SPL_ALLOC_BD
With bd_info dropped from the data section, the Logic PD OMAP3 boards
and AM3517 fail to boot. Enabling CONFIG_SPL_ALLOC_BD restores
them.

Fixes: 38d6b7ebda ("spl: Drop bd_info in the data section")
Signed-off-by: Adam Ford <aford173@gmail.com>
2021-03-15 11:10:46 +05:30
Simon Glass
2e059e4a6e spl: test: Add a test for spl_load_simple_fit()
As an example of an SPL test, add a new test for loading a FIT within
SPL. This runs on sandbox_spl. For this to work, the text base is adjusted
so that there is plenty of space available.

While we are here, document struct spl_load_info properly, since this is
currently ambiguous.

This test only verifies the logic path. It does not actually check that
the image is loaded correctly. It is not possible for sandbox's SPL to
actually run u-boot.img since it currently includes u-boot.bin rather than
u-boot. Further work could expand the test in that direction.

The need for this was noted at:

   http://patchwork.ozlabs.org/project/uboot/patch/20201216000944.2832585-3-mr.nuke.me@gmail.com/

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-12 09:57:31 -05:00
Patrice Chotard
92baaada1a configs: stm32: Remove BOARD_EARLY_INIT_F and BOARD_LATE_INIT for stm32 boards
These flags was defined and callbacks linked to these flags are empty
and only returning 0.
Remove BOARD_EARLY_INIT_F and BOARD_LATE_INIT flags for these stm32 boards.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-03-12 10:57:10 +01:00
Pali Rohár
e33e2092f5 arm: mvebu: Espressobin: Enable additional options
Enable support for NVMe disks which can be connected to mPCIe slot via M.2
reduction. Enable btrfs and squashfs filesystems which are used by more
Linux distributions. And enable fsuuid and setexpr commands which can be
useful in scripting.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-03-12 07:44:21 +01:00
Patrick Delaunay
9f97193616 board: stm32mp1: use CONFIG_SYS_MMC_ENV_DEV when available
Check whether user has explicitly defined the mmc device to use
in mmc_get_env_dev() with CONFIG_SYS_MMC_ENV_DEV.

On STMicroelectronics boards the used mmc device for environment is
the instance of boot device provided by the ROM code; the mmc instance
is configured by alias in device tree. The used partition is defined in
device tree with u-boot,mmc-env-partition = "ssbl".

This patch allows to override this selection for the support of customer
boards without alias; for example when SDMMC1 is not used and ENV in
mmc0=SDMMC2, user can force the value: CONFIG_SYS_MMC_ENV_DEV = 0.

On STMicroelectronics boards, the current behavior is kept with
CONFIG_SYS_MMC_ENV_DEV = -1.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-03-11 18:02:51 +01:00
Patrick Delaunay
e9470fcd27 configs: stm32mp15: move bootdelay configuration in defconfig
The STM32MP15 boards have no reason to configure bootdelay in stm32mp1.h
as it is already done with CONFIG_BOOTDELAY (default = 2) and in
include/env_default.h.

This patch allows configuration for customers which reuse stm32mp1.h
and reduce the size of the default environment.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-03-11 17:54:39 +01:00
Patrick Delaunay
3f0038dee4 configs: stm32mp1_trusted_defconfig rely on SCMI support
Enable SCMI clock and reset domain support for stm32mp1 platform
and ARM SMC mailbox driver used as communication channel for
SCMI messages between non-secure world and secure SCMI server.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-03-11 17:03:19 +01:00
Siew Chin Lim
8a3244d0ba configs: socfpga: Add defconfig for Agilex with VAB support
Booting Agilex with Vendor Authorized Boot.

Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
2021-03-08 10:59:12 +08:00
Siew Chin Lim
6bf1249a92 configs: socfpga: soc64: Move CONFIG_BOOTCOMMAND to defconfig
CONFIG_BOOTCOMMAND have been moved to Kconfig.boot. This patch
move the CONFIG_BOOTCOMMAND macro from socfpga_soc64_common.h to
*_defconfig file for both Stratix 10 and Agilex.

Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
2021-03-08 10:59:11 +08:00
Bin Meng
9a39f76c7a ppc: qemu: Enable RTC support via I2C
The QEMU ppce500 target integrates a Freescale I2C controller and
has a Pericom pt7c4338 RTC connected to it. Enable corresponding
DM drivers so that 'date' command is actually useful.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05 10:25:43 +05:30
Bin Meng
037b17d29c ppc: qemu: Enable support for power off via GPIO
The QEMU ppce500 target provides the power off functionality via
the GPIO pin#0, and we can support this using the sysreset gpio
poweroff driver. Let's enable it.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05 10:25:43 +05:30
Bin Meng
e022403adb ppc: qemu: Enable GPIO support
QEMU ppce500 target integrates a GPIO controller that is compatible
with the QorIQ GPIO controller. Enable the DM GPIO driver for it
and the 'gpio' command.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05 10:25:43 +05:30
Bin Meng
843d9b8d03 ppc: qemu: Enable VirtIO BLK support
Enable VirtIO BLK driver so that we can store a kernel image to
a disk image and boot from there.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05 10:25:43 +05:30
Bin Meng
46c9b59536 ppc: qemu: Enable VirtIO NET support
By default the QEMU ppce500 machine connects a VirtIO NET to the
PCI controller, although it can be replaced to an e1000 NIC via
additional command line options.

Now that we have switched over to DM PCI, VirtIO support becomes
possible. This commit enables the support.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05 10:25:43 +05:30
Bin Meng
3fc735d4a5 ppc: qemu: Drop CONFIG_OF_BOARD_SETUP
ft_board_setup() is now empty. Drop it.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05 10:25:43 +05:30
Bin Meng
8ee401670a ppc: qemu: Switch over to use DM ETH and PCI
At present the board supports non-DM version PCI and E1000 drivers.
Switch over to use DM ETH and PCI by:

- Rewrite the PCI address map functions using DM APIs
- Enable CONFIG_MISC_INIT_R to do the PCI initialization and
  address map
- Drop unnecessary ad-hoc config macros
- Remove board_eth_init() in the board codes

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05 10:25:43 +05:30
Bin Meng
2e91e8b332 ppc: qemu: Switch over to use DM serial
The QEMU ppce500 target integrates 2 NS16550 serial ports. Switch
over to use the DM version of the driver by:

- drop unnecessary ad-hoc config macros
- add get_serial_clock() in the board codes

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05 10:25:43 +05:30
Bin Meng
d8a61a7f32 ppc: qemu: Enable driver model
At present QEMU ppce500 target has not been migrated to driver model
yet. As a start, let's enable driver model and the 'dm' command.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05 10:25:42 +05:30
Bin Meng
c1979d74bc ppc: qemu: Enable OF_CONTROL
The QEMU ppce500 machine generates a device tree blob and passes
it to U-Boot during boot. Let's enable OF_CONTROL with OF_BOARD
and provide board_fdt_blob_setup() in the board codes.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05 10:25:42 +05:30
Bin Meng
91617d2865 ppc: qemu: Drop board_early_init_f()
This function does nothing. Drop it.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05 10:25:42 +05:30
Pali Rohár
d6bf36c775 Nokia RX-51: Enable CONFIG_CMD_BOOTD
CONFIG_CMD_BOOTD provides 'boot' command which is required in more scripts.

Signed-off-by: Pali Rohár <pali@kernel.org>
2021-03-04 14:40:56 -05:00
Tom Rini
52ba373b78 i.MX for 2021.04
----------------
 
 - new boards:
 	- i.MX8MN Beacon EmbeddedWorks (2GB)
 	- Gateworks Venice imx8mm
 - convert to DM:
 	- imx53-qsb, mx53loco, mx51evk, mx23-evk
 - Fixes :
 	- Network : FEC ethernet quirks
 	- DH dh-imx6
 
 CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/6597
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCYD+asg8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76YI0QCeLhbpWfZM7sixvsEsLNt6DLvEiEQAnRqSjFsQ
 BEcRslPhjQc+mALAHDYD
 =7fLb
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20210303' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

i.MX for 2021.04
----------------

- new boards:
	- i.MX8MN Beacon EmbeddedWorks (2GB)
	- Gateworks Venice imx8mm
- convert to DM:
	- imx53-qsb, mx53loco, mx51evk, mx23-evk
- Fixes :
	- Network : FEC ethernet quirks
	- DH dh-imx6

CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/6597
2021-03-03 10:10:34 -05:00
Tim Harvey
03bf8436a3 board: gateworks: imx8mm: Add Gateworks Venice board support
Add initial support for Gateworks Venice product family based on the
i.MX 8M Mini SoC

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-03-03 14:15:02 +01:00
Pali Rohár
57ac28720d Nokia RX-51: Enable usbtty serial console by default
Now when usbtty serial console is fixed in U-Boot enable CONFIG_USB_TTY for
Nokia RX-51 board by default.

Fix also USB product id as U-Boot ignores CONFIG_USBD_PRODUCTID macro and
include U-Boot string into USB product name to indicate usage of U-Boot.

CONFIG_CONSOLE_MUX is already used and U-Boot console is available for
all in/out devices. Therefore there is no need to have separate commands
'run sercon', 'run usbcon' and 'run vgacon', so remove them.

As space for U-Boot is limited to 256kB, enable CONFIG_OPTIMIZE_INLINING
and disable some other unused options so CONFIG_USB_TTY can be enabled.

Nokia RX-51 does not have easily accessible UART serial console so the only
option for easy debugging is to use device's keyboard+screen or this usbtty
serial console over USB.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
2021-03-03 04:12:46 +01:00
Tom Rini
78af81c345 - Disable Grub workaround for RPi2
- enable HS200 mode for iproc sdhci
 - add armv7 support for iproc_rng200
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEUdvKHhzqrUYPB/u8L21+TfbCqH4FAmA+cOYSHG1icnVnZ2Vy
 QHN1c2UuY29tAAoJEC9tfk32wqh+1U4P/0oZIZ73PS92Vpdyh0WMep5CPb9xahCJ
 fAGhJ7yZ+kt8xOYBZX6iIbBi2Zrk9LBFYDOfmexK2LSxIra9tocg+chkAPW384+4
 S+rNIeuQxdoDGzuc7q8z+Xk/clEI8pKYp/M0nYSUwTXTGEWLb3Jn9xv6zGuy6xct
 XWNN7ag9yWrTMGEpheoW4dfoHOh7Vut3EBWo/iqQxCkVagT3tRRl87AEsxSwmzf8
 vTAOujbpQKyehHR4c5UtV8bBZiJUOXDB+52DahMzpBNzEUYfuG+fLdUQ0pADQVmt
 Wmahd6G7e0s/d5jfaFUgQD5Yat1KO7UvuxsXyZVM6+Vw3Q0yCx6xFx4AA/LPfKtJ
 eY/yhqkMQmv0Xxv23QFCjyjEZvr2ZCNvFOe4tVXI63gh06hBZU277VFicHLq8VAs
 VnFFQBLnyJA5VJsaE+2yXPh9TnorjGG3YEsIwd9fr4PpkA/UclfpJBBPGJ98e7rF
 oUYkUvbfETFPhWCJy9UuH4ciXtwJuhpNQ34MGIS2WY1HbmKcAyVbezDege5+rFc2
 /4f0Xz6pGItw48TknaKNlbJoZ1OU3uSiwF9PN6mv+PY57YDNYI2USU68fnDQfexa
 /MANmEBIWoXnunQ3eoneXuJjGiSDY1eaOFA6JS5t3dbNv4mssgOO26Jw5mEl0n9X
 a8ipBmyt9dIx
 =dl67
 -----END PGP SIGNATURE-----

Merge tag 'rpi-next-2021.04.2' of https://source.denx.de/u-boot/custodians/u-boot-raspberrypi

- Disable Grub workaround for RPi2
- enable HS200 mode for iproc sdhci
- add armv7 support for iproc_rng200
2021-03-02 16:46:16 -05:00
Tom Rini
20ecfbe931 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-03-02 09:36:23 -05:00
Matthias Brugger
fae165b5a1 configs: rpi4_32: Enable iProc RNG200
Enable the RNG driver for RPi4 with 32 bit.

Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2021-03-02 13:53:53 +01:00
Matthias Brugger
60a376b093 configs: RPi2: Disable EFI Grub workaround
The EFI Grub workaround isn't needed with Grub version 2.04 or higher.
This version was published over a year ago, so disable the workaround
to reduce boot time.

Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2021-03-02 13:53:36 +01:00
Adam Ford
5d9b166401 imx: Add 2GB lpddr support for i.MX8MN Beacon EmbeddedWorks devkit.
There is a second lpddr configuration with 2GB of RAM, but this requires
different RAM timings, so in addition to adding the timing file, a
separate defconfig is necessary.

Signed-off-by: Adam Ford <aford173@gmail.com>
2021-03-01 10:21:36 +01:00
Ye Li
aacf04fb43 mx6sabre: Fix boot failure
CONFIG_SPL_LEGACY_IMAGE_SUPPORT is necessary for mx6sabresd and
mx6sabreauto, because u-boot is packed as legacy image not FIT.
However, this config is not set when CONFIG_SPL_LOAD_FIT is enabled.
Must enable it explicitly, otherwise will fail to boot like below.

U-Boot SPL 2021.04-rc2 (Feb 20 2021 - 16:43:04 -0800)
Trying to boot from MMC1
mmc_load_image_raw_sector: mmc block read error
SPL: failed to boot from all boot devices

Signed-off-by: Ye Li <ye.li@nxp.com>
2021-03-01 10:21:36 +01:00
Fabio Estevam
23013aa961 mx23evk: Convert to driver model
Make the conversion to driver model as it is mandatory.

Successfully tested booting Linux from the SD card.

Dropped splash screen support as this needs to be properly
converted to DM and tested.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
2021-03-01 10:21:36 +01:00
Fabio Estevam
07fc671d7e mx51evk: Convert to driver model
Make the conversion to driver model as it is mandatory.

Tested booting the Linux kernel from the SD card.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
2021-03-01 10:21:36 +01:00
Fabio Estevam
5c8db4922d mx53loco: Convert to driver model
Make the conversion to driver model as it is mandatory.

Remove the SATA support for now as the i.MX53 support has not
been added yet.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
2021-03-01 10:21:36 +01:00
Marek Vasut
7402310f7c ARM: imx6: dh-imx6: Enable support for applying DTO
Enable DTO support to make it possible to boot fitImage with DTOs
embedded in them.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2021-02-27 16:56:18 +01:00
Marek Vasut
58cbf2eff5 ARM: imx: Revert "dh_imx6: Switch to full DM-aware"
This reverts commit 03a673cf49 ("dh_imx6: Switch to full DM-aware").
According to discussion [1], the patch is known to break the dh_imx6
board, however it made it upstream just before 2021.01-rc4, likely by
mistake. Revert this patch to put the board back into working order.

Also note that this board has no DM SPL support due to OCRAM size
limitations, but that is fine, as SPL DM support is optional.

[1] https://lists.denx.de/pipermail/u-boot/2020-June/417986.html

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andreas Geisreiter <ageisreiter@dh-electronics.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Ludwig Zenz <lzenz@dh-electronics.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Tom Rini <trini@konsulko.com>
2021-02-27 16:56:05 +01:00
Tom Rini
08cca188c1 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-usb
- fastboot updates / fixes
2021-02-26 15:11:08 -05:00
Tom Rini
a3c6d287ba - Add USB host boot support in stm32mp1 config
- Enable uefi related commands for STMicroelectronics STM32MP15 boards
 - Remove duplicate uart nodes in stm32mp15 device tree
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEE56Yx6b9SnloYCWtD4rK92eCqk3UFAmA5DRwACgkQ4rK92eCq
 k3WKtQf+Nk2N8XzhKgoz4dfg+A/uZ1ppKiuuYfHWitvw9OLrjGO61MnYOc6Dh7De
 LchPExBYnatj3lxu3IEaaNUGJRujnt9n3W8JNQTGB81MI1TO2oITEhAyDqpMGtqt
 pvr1NaoxhZM4B7n/HoQnVB+XtlP08w45SQiEXjjaO82hWRk45sAZ7WGFSs60iVck
 ocqhrJ/2AraG98JQPxWfvdqr+24gl1Gt++KT/cdHS//IeYJJYuiCD3m9vOj8TatH
 gDVbfR6tquZ5HLvKr/orRz3smaCuutWdHcDwcjs3kFK1rBHSYFZhG3qHQ3ZqNm+w
 T/7JIqz4W366o7QZXXlCoi56w2tpug==
 =f/Cg
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20210226' of https://gitlab.denx.de/u-boot/custodians/u-boot-stm

- Add USB host boot support in stm32mp1 config
- Enable uefi related commands for STMicroelectronics STM32MP15 boards
- Remove duplicate uart nodes in stm32mp15 device tree
2021-02-26 12:41:06 -05:00
Ilias Apalodimas
1b3db349c0 configs: stm32mp1: enable uefi related commands
The board can boot with UEFI. With the latest changes in U-Boot's
EFI subsystem we also have support for EFI runtime variables, without
SetVariable support.  We can also store the EFI variables in a file on the
ESP partition and preserve them across reboots.
The env and efidebug commands are missing in order to configure
EFI variables and the efibootmgr though.  Since U-Boot's default config
enables other EFI related commands (e.g bootefi), let's add the env related
and efidebug commands and allow users to do that

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-02-26 15:45:22 +01:00
Sean Anderson
d4f22cb39e test: dm: Add test for fastboot mmc partition naming
This test verifies the mapping between fastboot partitions and partitions
as understood by U-Boot. It also tests the creation of GPT partitions,
though that is not the primary goal.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-02-26 15:30:55 +01:00
Marek Behún
579e656f4f arm: mvebu: turris_mox: Enable NVMe support
NVMe drives can be connected to Turris MOX via MOX B and MOX G
extensions.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-02-26 10:22:29 +01:00
Pali Rohár
3abcc76ef5 arm: mvebu: turris_mox: Enable CONFIG_USB_XHCI_PCI
USB devices can be connected to Turris MOX also via MOX F extension which
contains VL805 PCIe based USB 3.0 controller.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-02-26 10:22:29 +01:00
Pali Rohár
b1d58437ef arm: mvebu: turris_mox: Enable CONFIG_PCI_PNP
PCIe devices do not work in U-Boot without proper initialization and
configuration of PCI config space like the PCI_BASE_ADDRESS_0 register.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-02-26 10:22:29 +01:00
Tom Rini
2cc6071ed4 ppc: Remove MPC8569MDS board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.  As this is the last ARCH_MPC8569 board, remove that support
as well.

Cc: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-25 11:59:54 -05:00
Tom Rini
24b0212dd8 ppc: configs: Remove a few non-updated build configurations
In the cases of T2080RDB_SECURE_BOOT, T2080RDB_SRIO_PCIE_BOOT,
P2041RDB_SECURE_BOOT, P2041RDB_SRIO_PCIE_BOOT, P3041DS_SRIO_PCIE_BOOT
and P4080DS_SRIO_PCIE_BOOT while some forms of the board have been
migrated more fully to current build standards, these have not.  Remove
them.

Cc: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-25 11:59:53 -05:00
Tom Rini
93ef93b60b arm: Remove sksimx6 board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2021-02-25 11:59:53 -05:00
Tom Rini
53ad2db946 arm: Remove mx53smd board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-02-25 11:59:06 -05:00
Tom Rini
1c4bd238b5 arm: Remove mx53ard board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-02-25 11:59:05 -05:00
Tom Rini
2610bf14b5 arm: Remove mx25pdk board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-02-25 11:59:05 -05:00
Matthias Brugger
872b1921d3 configs: BPI-R2: Disable EFI Grub workaround
The EFI Grub workaround on BananaPi R2 slows down the boot process to
the point, that the watchdog will trigger a reboot before the kernel can
reset it. Fix this by disabeling the workaround.

Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2021-02-24 16:51:48 -05:00
Diego Sueiro
9abe5e6803 vexpress64_fvp: Set DRAM to 4G to match with kernel devicetree
Currently, the kernel devicetree is setting the DRAM size to ~4G.

Signed-off-by: Diego Sueiro <diego.sueiro@arm.com>
2021-02-24 16:51:48 -05:00
Peter Robinson
db5f1a50ef config: hikey: convert to DM_USB and DM_ETH
Convert the hikey to use DM_USB and DM_ETH.

Conversion based on rpi as it has a similar DWC config.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
2021-02-24 16:51:48 -05:00
Tom Rini
8f7a16aac3 - adds adc-keys button driver
- fix meson-saradc driver to get reference voltage
 - add adc-keys test for sandbox
 - enable adc-keys for VIM3 & VIM3L boards
 - fix button.h build
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAmAzv0gACgkQd9zb2sjI
 SdGUaw//ZeWLd5uVOIb7lWW/LyEM8gjll3SGm40YMvxucBkb3tYyQzWpInUDAua0
 +rOpXptlCZ6WMfTJ2PhB0e30aZexgN3XsvHYEMEV7MGmk1HoUfqGHiDWcI1pDLD0
 p8cmoNoDYWDUqj1J1ibUUOjK+SrAXjezp+kxSjP0ttpXX2RxhXEZrFwzSK6uqUZk
 acqLwg+dOZZLtYZb1gYiDu2NHxnLEqRGqoG/D5emKjZQ3Ofquw+/TFawWpZH5qZf
 cRWCtEo8b9QMdgkI9wvgTHPfPGIP3mkRfQpGrhUmtDsX15s3VVIsEDtjmLluXn6P
 TjVocElz2BrsYENFLo7vt/V7A7MQ6n/276y3H6hyzPwM/LMPLWUsSowiYPVgfXzy
 td8f5NgH8996LN79ia8ZlVYeV3XJu1w26l7kSfBpybS1HVXNTSCsHy5a9y2vjl1B
 YH2O8i7yLxwld/ce0oQtu+6SiFaKWBUdc1FQXOvXeYy89VsRqvaS7RMI2yF3GCcb
 Ov38QVkq2hWIyz4CfpyKtXGSr/H7tOtQdEi9eAMeJwbBprMh/fjpeI8M0QAGdAW0
 F5jUFHK4+BFlqOFphTb00SYLFPCBRfK4kwg2azfQs4589ShlcLaY1RkGRsezLCj2
 bqwITNC+bLup5MSseBr/CgMaXR7JMxbYOuYlLupzRyo5yI0MWvo=
 =/PJV
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20210222' of https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic

- adds adc-keys button driver
- fix meson-saradc driver to get reference voltage
- add adc-keys test for sandbox
- enable adc-keys for VIM3 & VIM3L boards
- fix button.h build
2021-02-22 12:37:02 -05:00
Heiko Schocher
397ecc30b8 mpc83xx: kmeter1: increase malloc_f space
make malloc space before relocation bigger, set

CONFIG_SYS_MALLOC_F_LEN=0x800

Signed-off-by: Heiko Schocher <hs@denx.de>
2021-02-21 18:46:41 -05:00
Heiko Schocher
71523efc61 mpc83xx: kmeter1_defconfig add missing BAT4 config
BAT4 setup missed in defconfig, add it.

Signed-off-by: Heiko Schocher <hs@denx.de>
2021-02-21 18:46:41 -05:00
Sinan Akman
a2c48cb757 mpc8379erdb: Convert to DM_MMC
Signed-off-by: Sinan Akman <sinan@writeme.com>
2021-02-21 18:46:41 -05:00
Tom Rini
b732c8780c Merge tag 'for-v2021.04' of https://gitlab.denx.de/u-boot/custodians/u-boot-i2c
i2c changes for v2021.04

new feature:
- Allow disabling driver model for I2C in SPL

fixes:
- i2c-gpio: Fix GPIO output
- at91: fix crash when using 'i2c probe'
2021-02-21 11:17:07 -05:00
Igor Opaniuk
a907dce88e board: freescale: drop CONFIG_DM_I2C undefs
Drop CONFIG_DM_I2C undefs from board header files, and make them
disabled on these boards in defconfigs instead.

Disabling on Kconfig symbol was done automatically with this script:

cd configs
files=(*ls1046a*)
files2=(*T104*RDB*)
files3=(ls1021atwr_*)
files4=("imx8mp_evk_defconfig phycore-imx8mp_defconfig")
combine=("${files[@]}" "${files2[@]}" "${files3[@]}" "${files4[@]}")
cd ..

for item in ${combine[*]}
do
   echo "Adjusting  $item"
   echo "# CONFIG_SPL_DM_I2C is not set" >> configs/$item
   make $item && make savedefconfig && cp defconfig configs/$item
done

Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io>
Reviewed-by: Tom Rini <trini@konsulko.com>
2021-02-21 06:07:45 +01:00
Marek Vasut
c98cc9b2e8 ARM: rmobile: Enable CONFIG_PCI_REGION_MULTI_ENTRY on RCar3
R-Car3 can have multiple regions of type memory in DT, enable
CONFIG_PCI_REGION_MULTI_ENTRY to handle those instead of using
just one of the memory regions.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2021-02-20 22:38:28 +01:00
Jaehoon Chung
144d0574d5 configs: enable CONFIG_MMC_PWRSEQ configuration
Enable CONFIG_MMC_PWRSEQ configuration about boards that is using
rockchip_dw_mmc driver.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-02-19 15:11:33 +08:00
Nicolas Saenz Julienne
74a9f68f7f configs: rpi4: Enable DM_DMA across all RPi4 configurations
The DM_DMA option is needed in order to translate physical address into
bus addresses on a per-device basis.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2021-02-18 11:59:08 +01:00
Nicolas Saenz Julienne
e88018769c dm: test: Add test case for dev->dma_offset
Add test to validate dev->dma_offset is properly set on devices.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2021-02-18 11:56:25 +01:00
Matthias Brugger
1613cf506c config: Enable iProc RNG200 driver in RPi4 configs
We find the iProc RNG200 in the Raspberry Pi 4. Add it to all it's
config so that it can be used.

Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
[mb: drop rpi_4_32b_defconfig]
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2021-02-18 11:56:20 +01:00
Marek Szyprowski
289d0ead28 test: add a simple test for the adc-keys button driver
Add adc-keys device to the sandbox/test.dts and connect it to the channel
#3 of the sandbox_adc driver. The default values sampled by sandbox_adc
driver determines that button3 and button4 are released and button5 is
pressed.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-02-18 11:37:26 +01:00
Marek Szyprowski
a638fba9fc configs: khadas-vim3(l): enable Function button support
Add options required to check the 'Function' button state.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-02-18 11:37:26 +01:00
Alex Marginean
d003434525 configs: ls1028a: Enable the Ethernet switch driver in defconfig
The switch driver for LS1028A Ethernet switch is now compiled in for
the NXP LS1028A reference design boards and for the Kontron SMARC-sAL28.

Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Michael Walle <michael@walle.cc>
2021-02-16 12:38:36 -05:00
Tom Rini
6144438fb5 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-15 13:34:30 -05:00
Tom Rini
73effc2dca sh: Remove sh7763rdp board
This board has not been converted to CONFIG_DM by the deadline of v2020.01
and is missing other conversions which depend on this as well.  Remove it.

Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-15 10:16:24 -05:00
Tom Rini
f0debb2136 sh: Remove sh7757lcr board
This board has not been converted to CONFIG_DM by the deadline of v2020.01
and is missing other conversions which depend on this as well.  Remove it.

As this is the last SH4A board, remove that support as well.

Cc: Marek Vasut <marek.vasut+renesas@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-15 10:16:24 -05:00
Tom Rini
0c3cd2443b sh: Remove sh7753evb board
This board has not been converted to CONFIG_DM by the deadline of v2020.01
and is missing other conversions which depend on this as well.  Remove it.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-15 10:16:24 -05:00
Tom Rini
da43d96f03 sh: Remove sh7752evb board
This board has not been converted to CONFIG_DM by the deadline of v2020.01
and is missing other conversions which depend on this as well.  Remove it.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-15 10:16:23 -05:00
Tom Rini
215386e48c sh: Remove r7780mp board
This board has not been converted to CONFIG_DM by the deadline of v2020.01
and is missing other conversions which depend on this as well.  Remove it.

Patch-cc: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Patch-cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-15 10:16:23 -05:00
Tom Rini
5617351532 sh: Remove MigoR board
This board has not been converted to CONFIG_DM by the deadline of v2020.01
and is missing other conversions which depend on this as well.  Remove it.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-15 10:16:23 -05:00
Tom Rini
865acad78f ppc: Remove MPC8641HPCN board
This board relies on using CONFIG_LIBATA but does not enable CONFIG_AHCI.  The
deadline for this conversion was the v2019.07 release.  The use of CONFIG_AHCI
requires CONFIG_DM.  The deadline for this conversion was v2020.01.  Remove
this board.

Cc: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-15 10:16:21 -05:00
Tom Rini
41bacbe142 ppc: Remove MPC8610HPCD board
This board relies on using CONFIG_LIBATA but does not enable CONFIG_AHCI.  The
deadline for this conversion was the v2019.07 release.  The use of CONFIG_AHCI
requires CONFIG_DM.  The deadline for this conversion was v2020.01.  Remove
this board.

Cc: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-15 10:15:48 -05:00
Tom Rini
2dce449801 ppc: Remove MPC8572DS board
This board relies on using CONFIG_LIBATA but does not enable CONFIG_AHCI.  The
deadline for this conversion was the v2019.07 release.  The use of CONFIG_AHCI
requires CONFIG_DM.  The deadline for this conversion was v2020.01.  Remove
this board.

Cc: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-15 10:15:13 -05:00
Tom Rini
23397775bc ppc: Remove MPC8544DS board
This board relies on using CONFIG_LIBATA but does not enable CONFIG_AHCI.  The
deadline for this conversion was the v2019.07 release.  The use of CONFIG_AHCI
requires CONFIG_DM.  The deadline for this conversion was v2020.01.  Remove
this board.

Cc: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-15 10:14:03 -05:00
Tom Rini
22924317be arm: Remove db-88f6281-bp board
This board has not been converted to CONFIG_DM_MMC by the deadline of
v2019.04, which is almost two years ago.  In addition there are other DM
migrations it is also missing.  Remove it.

Cc: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Chris Packham <judge.packham@gmail.com>
2021-02-15 10:11:38 -05:00
Tom Rini
2ce7b65d6d arm: Remove ls2080a_simu board
This board has not been converted to CONFIG_DM_MMC by the deadline of
v2019.04, which is almost two years ago.  In addition there are other DM
migrations it is also missing.  Remove it.

Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Cc: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-15 10:11:38 -05:00
Tom Rini
a1361f4581 arm: Remove mx35pdk board
This board has not been converted to CONFIG_DM_MMC by the deadline of
v2019.04, which is almost two years ago.  In addition there are other DM
migrations it is also missing.  Remove it.

Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2021-02-15 10:11:38 -05:00
Tom Rini
8444860ca0 arm: Remove apx4devkit board
This board has not been converted to CONFIG_DM_MMC by the deadline of
v2019.04, which is almost two years ago.  In addition there are other DM
migrations it is also missing.  Remove it.

Cc: Lauri Hintsala <lauri.hintsala@bluegiga.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Lauri Hintsala <lauri.hintsala@silabs.com<mailto:lauri.hintsala@silabs.com>>
Signed-off-by: Tom Rini <trini@konsulko.com<mailto:trini@konsulko.com>>
2021-02-15 10:11:37 -05:00
Tom Rini
c7182c02ce - Add configuration helpers for MIPI D-PHY
- generic-phy: add configure op
 - Add Amlogic AXG MIPI D-PHY driver & MIPI PCIe Analog PHY driver
 - odroid: add runtime detection of the N2/N2+/C4/HC4 variants
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAmAjoVAACgkQd9zb2sjI
 SdELKxAAjFUrK6TmfTwiEFXZyZxl7BPvGCRmlvS/lomWu2LRbV3kqE759Spe9SsQ
 e/xm7tmM3M+R2SP71dPkc9glyopSIR7OjsAkJgfp/XI1pQDJwo4D1RWFEFwPevLo
 APA5OznivUyN0nKMCttYlbdq0PefpNOJ6HKAWBW2IZCMmMo4IspcvEyZsQcynqQU
 J6ftHFLK+uCEGErnePJgHenE8sjnx5ZX/dbupbiHvnQAvul0WxZSr3ENON13DYid
 smcTBeGxdJvLEcfkwvBKvgr2oQHJWq+9X3hGhjp19KfNz/cEz2TJKLn2usSNgTM4
 UhZFYPVuQEuCvrP+ckjd9vHBxDRTb/13xB61X/QaqK6QwkAfqjTJTvMKdBZJl2jI
 6J/52CppxGbvpckh4gNcfAvaonqMWSyVWk6lR+IX2ir4w/f8e2Yj3DlwtgzLj7s3
 ORqc/l/uPXC7JffpJon1pooPHRK6e2eyQKgggWkimaMmC0NJsTG2nKOpN/EQ+fpW
 /+g9G8bLu1/lrAtV6U81NenHvvoQi6OmKQ78PJDfAoGifvGwm0172PT55v5VABcI
 KRi9leX01x2IvlJurgZGPCjgk97sn/nOWreYC/Kfrnn7U/5kg8a1joSXLt3Uicup
 Ag3xIjX3Ux1h1KTB7fc7Xu2nLS45wmiLto0j1BDxikJI2MVdbME=
 =5X7F
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20210210' of https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic

- Add configuration helpers for MIPI D-PHY
- generic-phy: add configure op
- Add Amlogic AXG MIPI D-PHY driver & MIPI PCIe Analog PHY driver
- odroid: add runtime detection of the N2/N2+/C4/HC4 variants
2021-02-10 07:56:57 -05:00
Marek Szyprowski
8bc780106c board: amlogic: odroid: add runtime detection of the N2/N2+/C4/HC4 variants
Use the ADC channel 1 to check the hardware revision of the board and
detect the N2 vs. N2+ and the C4 vs. HC4 variants. Each of them use
different dtb file, so adjust fdtfile environment variable to the
detected variant.

The ADC min/max values for each variant are taken from the vendor code,
adjusted to the 12-bit ADC driver operation mode (vendor code use 10-bit
mode).

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-02-10 10:00:51 +01:00
Patrick Delaunay
8c005c731f configs: stm32mp1: enable the fastboot oem command bootbus
Enable the fastboot oem command bootbus, used to configure the eMMC
boot behavior, with same format than 'mmc bootbus'
and with parameter: boot_bus_width reset_boot_bus_width boot_mode

On stm32mp1 boards the expected command is
$> fastboot oem partconf:0 0 0

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2021-02-09 10:08:24 +01:00
Patrick Delaunay
6c57154925 configs: stm32mp1: enable the fastboot oem command partconf
Enable the fastboot oem command partconf, used to select the correct
eMMC boot partition, with same format than 'mmc partconf'
with parameter: boot_ack boot_partition
On stm32mp1 family:
- boot_ack = 1 (Boot Acknowledge is needed by ROM code)
- boot_partition = 1 or 2 (Boot partition 1 / 2 enabled for boot)

So on EV1 board the expected commands to select boot partition 1 or 2
$> fastboot oem partconf:1 1
$> fastboot oem partconf:1 2

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2021-02-09 10:07:55 +01:00
Jean-Philippe ROMAIN
f35ce379fe configs: stm32mp1: enable the fastboot oem command format
Enable the fastboot oem command format and set the variable
"partitions" with default eMMC partitions list.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Jean-Philippe ROMAIN <jean-philippe.romain@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2021-02-09 10:04:13 +01:00
Jean-Philippe ROMAIN
26858a3ee2 configs: stm32mp1: enable fastboot support of eMMC boot partition
Activate fastboot support on boot partition for eMMC, mmc1 device
on STMicroelectronics board (EV1).

Signed-off-by: Jean-Philippe ROMAIN <jean-philippe.romain@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2021-02-09 10:02:25 +01:00
Tom Rini
e14d5762de Merge git://git.denx.de/u-boot-marvell
- Espressobin: Set default env values at runtime (Pali)
- Espressobin: Set the maximum slave SPI speed to 40MHz (Pali)
- theadorable: PCIe test code enhancement and early deemphasis
  enabling (Stefan)
- pci_mvebu: Disable config access to PCI host bridge ports (Stefan)
- mv_sdhci: parse device-tree entry (Baruch)
2021-02-08 10:55:51 -05:00
Tom Rini
a10d06add7 Merge git://git.denx.de/u-boot-fsl-qoriq
Layerscape: Enable gpio
Bug fixes & updates related to dspi, qspi, pciep, SVR mask,
stream-id, env variables, mdio for LAyerscape Platforms
Add SATA, network variant 1, 2 support on sl28
powerpc: T1042: drop CONFIG_VIDEO, Add kmcent2 board supporrt, keymile
Bug fixes and updates for keymile, Kontron
2021-02-08 10:55:28 -05:00
Tom Rini
88262788fe Merge git://git.denx.de/u-boot-sh
- Beacon EmbeddedWorks RZG2H/N Dev Kit support
2021-02-08 10:54:37 -05:00
Biwen Li
5e7a207ebf configs: lx2160aqds: enable CMD_GPIO
Enable CMD_GPIO for board lx2160aqds

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-08 14:22:39 +05:30
Biwen Li
28e3bfc01f configs: lx2160ardb: enable CMD_GPIO
Enable CMD_GPIO for board lx2160ardb

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-08 14:01:22 +05:30
Biwen Li
f5a9b76b37 configs: ls1088ardb: enable DM_GPIO and CMD_GPIO
Enable DM_GPIO and CMD_GPIO for board ls1088ardb

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-08 14:01:22 +05:30
Biwen Li
010e61339f configs: ls1088aqds: enable DM_GPIO and CMD_GPIO
Enable DM_GPIO and CMD_GPIO for board ls1088aqds

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-08 14:01:22 +05:30
Biwen Li
bf965a2838 configs: ls2088aqds: enable CMD_GPIO
Enable CMD_GPIO for board ls2088aqds

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-08 14:01:22 +05:30