Commit graph

25856 commits

Author SHA1 Message Date
Rui Miguel Silva
dc3abd8006 nvmxip: move header to include
Move header to include to allow external code
to get the internal bdev structures to access
block device operations.

as at it, just add the UCLASS_NVMXIP string
so we get the correct output in partitions
listing.

Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
2023-06-19 14:34:16 -04:00
Rui Miguel Silva
2974e2cd28 fwu_metadata: make sure structures are packed
The fwu metadata in the metadata partitions
should/are packed to guarantee that the info is
correct in all platforms. Also the size of them
are used to calculate the crc32 and that is important
to get it right.

Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2023-06-19 14:34:16 -04:00
Dario Binacchi
6d9f86571d configs: stm32f746-disco: remove a useless comment
Commit 8fc78fc73b ("configs: migrate CONFIG_BMP_16/24/32BPP to defconfigs")
made the comment useless.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2023-06-16 11:25:25 +02:00
Patrick Delaunay
08002ffd08 ARM: dts: stm32mp: alignment with v6.3
Device tree alignment with Linux kernel v6.3:
- f5a058023239 - ARM: dts: stm32: add i2c nodes into stm32mp131.dtsi
- 8539ebb435a5 - ARM: dts: stm32: enable i2c1 and i2c5 on
  stm32mp135f-dk.dts
- 8539ebb435a5 - ARM: dts: stm32: add spi nodes into stm32mp131.dtsi
- 15f72e0da4da - ARM: dts: stm32: add pinctrl and disabled spi5 node in
  stm32mp135f-dk
- ea99a5a02ebc - ARM: dts: stm32: Create separate pinmux for qspi cs pin
  in stm32mp15-pinctrl.dtsi
- a306d8962a24 - ARM: dts: stm32: Rename mdio0 to mdio
- 0a5ebb1f3367 - ARM: dts: stm32: Replace SAI format with dai-format DT
  property
- ccdab19738a6 - ARM: dts: stm32: add adc support to stm32mp13
- 022932ab55fd - ARM: dts: stm32: add adc pins muxing on stm32mp135f-dk
- ab2806ddad9d - ARM: dts: stm32: add dummy vdd_adc regulator on
  stm32mp135f-dk
- e46a180c060f - ARM: dts: stm32: add adc support on stm32mp135f-dk
- 9ebf215fbae1 - ARM: dts: stm32: add PWR fixed regulators on stm32mp131
- 16f4ff60519a - ARM: dts: stm32: add USBPHYC and dual USB HS PHY support
  on stm32mp131
- 4a47f0f3e936 - ARM: dts: stm32: add UBSH EHCI and OHCI support on
  stm32mp131
- 2a46bb66c47f - ARM: dts: stm32: add USB OTG HS support on stm32mp131
- 9ebf215fbae1 - ARM: dts: stm32: add fixed regulators to support usb on
  stm32mp135f-dk
- 16f4ff60519a - ARM: dts: stm32: enable USB HS phys on stm32mp135f-dk
- c4e7254cf6dc - ARM: dts: stm32: enable USB Host EHCI on stm32mp135f-dk
- 44978e135916 - ARM: dts: stm32: add pins for stm32g0 typec controller on stm32mp13
- 4f532403b1e5 - ARM: dts: stm32: enable USB OTG in dual role mode on
  stm32mp135f-dk
- e1f15571c96c - ARM: dts: stm32: add mcp23017 pinctrl entry for stm32mp13
- 6cc71374002e - ARM: dts: stm32: add mcp23017 IO expander on I2C1 on
  stm32mp135f-dk
- 7ffd2266bd32 - ARM: dts: stm32: Fix qspi pinctrl phandle for
  stm32mp15xx-dhcor-som
- 21d83512bf2b - ARM: dts: stm32: Fix qspi pinctrl phandle for
  stm32mp15xx-dhcom-som
- 732dbcf52f74 - ARM: dts: stm32: Fix qspi pinctrl phandle for
  stm32mp151a-prtt1l
- 003b7c6b24f4 - ARM: dts: stm32: remove sai kernel clock on
  stm32mp15xx-dkx
- f2b17b39bfff - ARM: dts: stm32: rename sound card on stm32mp15xx-dkx
- dee3cb759d3d - ARM: dts: stm32: Remove the pins-are-numbered property
- ae8cf3b48727 - ARM: dts: stm32: add i2s nodes on stm32mp131
- 619746a27bd0 - ARM: dts: stm32: add sai nodes on stm32mp131
- c5e05d08ef90 - ARM: dts: stm32: add spdifrx node on stm32mp131
- 0a5afd3ee0d0 - ARM: dts: stm32: add dfsdm node on stm32mp131
- bf9d876bea2e - ARM: dts: stm32: add timers support on stm32mp131
- a3183748371d - ARM: dts: stm32: add timer pins muxing for stm32mp135f-dk
- a9060c1326bc - ARM: dts: stm32: add timers support on stm32mp135f-dk
- a12154058f75 - ARM: dts: stm32: Fix User button on stm32mp135f-dk
- 2f33df889e99 - ARM: dts: stm32: Use new media bus type macros
- 366384e49551 - ARM: dts: stm32: Update part number NVMEM description on
  stm32mp131

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-06-16 11:22:07 +02:00
Patrick Delaunay
763c6b8d7a media: dt-bindings: media: Add macros for video interface bus types
Add a new dt-bindings/media/video-interfaces.h header that defines
macros corresponding to the bus types from media/video-interfaces.yaml.
This allows avoiding hardcoded constants in device tree sources.

Based on linux commit f7eeb0084593 ("media: dt-bindings: media: Add macros
for video interface bus types")

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-06-16 11:22:07 +02:00
Patrick Delaunay
d3126a3293 config: stm32mp15: remove CONFIG_FASTBOOT_CMD_OEM_FORMAT
Remove the support of the fastboot "oem format" command for STM32MP15x
boards and removed the associated env variable "partitions".
This command is not required; with fastboot tool, the GPT partition can
be handle with "flash" command in "gpt" target (=CONFIG_FASTBOOT_GPT_NAME),
for example: fastboot flash gpt gpt.bin

This patch avoids to define the GPT partitioning in U-Boot environment,
which is incompatible with planned modifications, for example to
support TF-A firmware update.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-06-16 11:05:15 +02:00
Patrick Delaunay
163c5f60eb fdt_support: add fdt_copy_fixed_partitions function
Add a new function fdt_copy_fixed_partitions to copy the fixed
partition nodes from U-Boot device tree to Linux kernel
device tree and to dynamically configure the MTD partitions.

This function fdt_copy_fixed_partitions is only based on device tree
with livetree compatible function and replace the function
fdt_fixup_mtdparts based on mtdparts variable.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-06-16 11:01:15 +02:00
Ioana Ciornei
5654ffa8f1 net: fsl-mc: sync remaining MC commands
This patch targets the last remaining commands left to sync to their
latest form - mainly the mc_get_version() API.

Besides this, remove any macro which is now of no help.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-06-15 17:58:53 +08:00
Ioana Ciornei
0aebee70bb net: fsl-mc: sync DPIO MC APIs
Sync the Data Path IO APIs to their latest form, this means the layout
of each command is created based on structures which clearly describe
the endianness of each field rather than some macros.

The command version is kept in place, meaning that the minimum MC
version accepted is not changed in any way.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-06-15 17:58:53 +08:00
Ioana Ciornei
4797269e74 net: fsl-mc: sync DPSPARSER MC APIs
Sync the Data Path Soft Parser APIs to their latest form, this
means the layout of each command is created based on structures which
clearly describe the endianness of each field rather than some macros.

The command version is kept in place, meaning that the minimum MC
version accepted is not changed in any way.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-06-15 17:58:53 +08:00
Ioana Ciornei
207c815770 net: fsl-mc: sync DPNI MC APIs
Sync the Data Path Network Interface APIs to their latest form, this
means the layout of each command is created based on structures which
clearly describe the endianness of each field rather than some macros.

The command version is kept in place, meaning that the minimum MC
version accepted is not changed in any way.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-06-15 17:58:53 +08:00
Ioana Ciornei
95f309a4f8 net: fsl-mc: sync DPRC MC APIs
Sync the Data Resource Container APIs to their latest form, this means
the layout of each command is created based on structures which clearly
describe the endianness of each field rather than some macros.

The command version is kept in place, meaning that the minimum MC
version accepted is not changed in any way.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-06-15 17:58:53 +08:00
Ioana Ciornei
018bc358d3 net: fsl-mc: sync DPMAC MC APIs
Sync the Data Path MAC APIs to their latest form, this means the
layout of each command is created based on structures which clearly
describe the endianness of each field rather than some macros.

The command version is kept in place, meaning that the minimum MC
version accepted is not changed in any way.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-06-15 17:58:53 +08:00
Ioana Ciornei
694dc0dd79 net: fsl-mc: sync DPBP MC APIs
Sync the Data Path Buffer Pool APIs to their latest form, this means the
layout of each command is created based on structures which clearly
describe the endianness of each field rather than some macros.

The command version is kept in place, meaning that the minimum MC
version accepted is not changed in any way.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-06-15 17:58:53 +08:00
Ioana Ciornei
f21d326be4 net: fsl-mc: remove unused MC APIs
There are multiple MC APIs which were added years ago but they are not
used at all in the u-boot source code. Remove all these APIs.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-06-15 17:58:53 +08:00
Florin Chiculita
c761028e34 board: fsl: lx2160ardb: add dts fixup function for RevC and newer
Since the new RevC LX2160A-RDB board has its 10G Aquantia PHYs at
different MDIO bus addresses, we must update both the kernel DTS and
u-boot's DTS (in case of DM_ETH) in case the board is indeed RevC or
newer. Use the newly introduced get_board_rev() function to trigger a
fixup of the kernel DTS to properly match the actual PHY addresses.
All this is encapsulated in the fdt_fixup_board_phy_revc() function
which will be used in the next patch.

Use the newly fdt_fixup_board_phy_revc() function introduced to
update both kernel's DTS and u-boot's DTS.

Signed-off-by: Florin Chiculita <florinlaurentiu.chiculita@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-06-15 17:58:48 +08:00
Ioana Ciornei
c85e96d0d1 cmd: net: add a 'net stats' command to dump network statistics
Add a new option to the 'net' command which can be used to dump network
statistics.

To do this, 3 new callbacks are added to the eth_ops structure:
.get_sset_count(), .get_strings(), .get_stats(). These callbacks
have the same functions as in Linux: to return the number of counters,
the strings which describe those counters and the actual values.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-06-14 18:40:16 +08:00
Ioana Ciornei
22df08d82e net: ldpaa_eth: extend debug capabilities with DPMAC statistics
The ldpaa_eth driver already had a DPMAC statistics dump, this patch
extends the list of stats and adds a bit more structure to the code.

For a bit more context, the DPAA2 u-boot software architecture uses a
default network interface object - a DPNI - which, at runtime, will get
connected to the currently used DPMAC object.
Each time the .stop() eth callback is called, the DPMAC is destroyed
thus any previous counters will get lost.

As a preparation for the next patches, we add a software kept set of
DPMAC counters which will get updated before each destroy operation
takes place.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-06-14 18:40:16 +08:00
Ioana Ciornei
13ca5c2f56 net: ldpaa_eth: transform dpni_statistics from a struct to a union
In order to simplify code, dpni_statistics can be written as a union.
Using the raw accessors we can just loop through all the statistics from
a page without trying to access each an every one independently.
Make this change to a union.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-06-14 18:40:16 +08:00
Ioana Ciornei
3e69762740 net: ldpaa_eth: fix the memory layout of the dpmac_get_counters() API
Each MC commands has a specific predefined memory layout that gets
interpreted by the firmware. The dpmac_get_counters() API memory layout
is wrong, thus the results returned by the command are incorrect.

Fix this by updating the offset of the counter field.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-06-14 18:40:16 +08:00
Tom Rini
7da82de916 Xilinx changes for v2023.10-rc1
global:
 - Use proper U-Boot project name
 
 Fix sparse warnings in zynqmp-clk, zynqmp handoff, board
 
 cmd:
 - Cover incorrect 0 length entries
 
 Versal NET:
 - Add bootmode logic
 - Support SPP production version
 - Add loadpdi command
 
 ZynqMP:
 - Clear pmufw node command ID handling
 - Change power domain behavior around zynqmp_pmufw_node()
 - Fix zynqmp cmd return values and pmufw command
 - Fix R5 tcm init and modes
 
 mmc:
 - Sync Versal NET emmc DT binding
 
 pcie:
 - Add support for ZynqMP PCIe root port
 
 video:
 - Add support for ZynqMP DP
 
 tools:
 - Fix debug message in relocate-rela
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCZIcDaAAKCRDKSWXLKUoM
 IZmlAKCbiI7CS8ngZpbzOIuMveebNn1jYgCghyl20Bb2zWoNy+sIY2fPIO9mwx4=
 =wPDv
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2023.10-rc1' of https://source.denx.de/u-boot/custodians/u-boot-microblaze into next

Xilinx changes for v2023.10-rc1

global:
- Use proper U-Boot project name

Fix sparse warnings in zynqmp-clk, zynqmp handoff, board

cmd:
- Cover incorrect 0 length entries

Versal NET:
- Add bootmode logic
- Support SPP production version
- Add loadpdi command

ZynqMP:
- Clear pmufw node command ID handling
- Change power domain behavior around zynqmp_pmufw_node()
- Fix zynqmp cmd return values and pmufw command
- Fix R5 tcm init and modes

mmc:
- Sync Versal NET emmc DT binding

pcie:
- Add support for ZynqMP PCIe root port

video:
- Add support for ZynqMP DP

tools:
- Fix debug message in relocate-rela
2023-06-12 16:42:37 -04:00
Tom Rini
260d4962e0 Merge tag v2023.07-rc4 into next
Signed-off-by: Tom Rini <trini@konsulko.com>
2023-06-12 14:55:33 -04:00
Venkatesh Yadav Abbarapu
dbec4f0b7f xilinx: zynqmp: Enable the vidconsole by default
Add the vidconsole flags for video serial console.

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/f1b58d1d1052bf2d8cb8b25af44ecbb567ebbd4a.1684312924.git.michal.simek@amd.com
2023-06-12 13:25:01 +02:00
Michal Simek
e9500ba9e0 video: Add support for RGBA8888 format
Add support for RGBA8888 32bpp format where pixels are picked in
32-bit integers, where the colors are stored in memory such that
R is at lowest address, G after that, B after that, and A last.

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/aa1de54b7d4ff46df6858f76d52634e0c5c71a4a.1684312924.git.michal.simek@amd.com
2023-06-12 13:25:01 +02:00
Michal Simek
1be82afa80 global: Use proper project name U-Boot
Use proper project name in comments, Kconfig, readmes.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/0dbdf0432405c1c38ffca55703b6737a48219e79.1684307818.git.michal.simek@amd.com
2023-06-12 13:24:31 +02:00
Marek Vasut
495fc04b6d net: phy: Unpublish phy_connect_dev()
The phy_connect_dev() is legacy API, now that there are no users,
make it internal to phy.c and unpublish it from headers.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-06-10 13:34:05 +02:00
Jassi Brar
6b403ca4dc fwu: DeveloperBox: add support for FWU
Add code to support FWU_MULTI_BANK_UPDATE.
The platform does not have gpt-partition storage for
Banks and MetaData, rather it used SPI-NOR backed
mtd regions for the purpose.

Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2023-06-09 13:52:40 -04:00
Masami Hiramatsu
4898679e19 FWU: Add FWU metadata access driver for MTD storage regions
In the FWU Multi Bank Update feature, the information about the
updatable images is stored as part of the metadata, on a separate
region. Add a driver for reading from and writing to the metadata
when the updatable images and the metadata are stored on a raw
MTD region.
The code is divided into core under drivers/fwu-mdata/ and some helper
functions clubbed together under lib/fwu_updates/

Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2023-06-09 13:52:40 -04:00
Jassi Brar
1e917a69e5 fwu: rename fwu_get_verified_mdata to fwu_get_mdata
fwu_get_mdata() sounds more appropriate than fwu_get_verified_mdata()

Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Tested-by: Sughosh Ganu <sughosh.ganu@linaro.org>
2023-06-09 13:52:40 -04:00
Jassi Brar
246ec2a12c fwu: meta-data: switch to management by common code
The common code can now read, verify and fix meta-data copies
while exposing one consistent structure to users.
 Only the .read_mdata() and .write_mdata() callbacks of fwu_mdata_ops
are needed. Get rid of .get_mdata() .update_mdata() .get_mdata_part_num()
.read_mdata_partition() and .write_mdata_partition() and also the
corresponding wrapper functions.

Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Tested-by: Sughosh Ganu <sughosh.ganu@linaro.org>
2023-06-09 13:52:40 -04:00
Jassi Brar
167994f295 fwu: move meta-data management in core
Instead of each i/f having to implement their own meta-data verification
and storage, move the logic in common code. This simplifies the i/f code
much simpler and compact.

Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Tested-by: Sughosh Ganu <sughosh.ganu@linaro.org>
2023-06-09 13:49:55 -04:00
Valentine Barshak
ed2f65f010 ARM: renesas: Add R8A77980 V3HSK board and CPLD code
Add board code for the R8A77980 V3HSK board.
Add CPLD sysreset driver to the R-Car V3H SK board.
Extracted from a larger patch by Valentine Barshak.

Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Tam Nguyen <tam.nguyen.xa@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[Marek: Sync configs and board code with V3H Condor, squash CPLD driver in]
2023-06-08 22:26:52 +02:00
Marek Vasut
79fedab62a ARM: rmobile: Drop eagle.h config of R8A77970 V3M Eagle board
The eagle.h is now empty and only includes rcar-gen3-common.h .
Use rcar-gen3-common.h directly instead and drop eagle.h .
No functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-06-08 22:26:51 +02:00
Masahisa Kojima
cccea18813 efi_loader: add the number of image entries in efi_capsule_update_info
The number of image array entries global variable is required
to support EFI capsule update. This information is exposed as a
num_image_type_guids variable, but this information
should be included in the efi_capsule_update_info structure.

This commit adds the num_images member in the
efi_capsule_update_info structure. All board files supporting
EFI capsule update are updated.

Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2023-06-08 09:20:36 +02:00
Ben Dooks
b46cec4166 ubifs: allow loading to above 4GiB
The ubifsload command is truncating any address above 4GiB as it casts
this address to an u32, instead of using an unsigned long which most of
the other load commands do. Change this to an unsigned long to allow
loading into high memory for boards which use these areas.

Fixes the following error:

=> ubifsload 0x2100000000 /boot/Image.lzma
Loading file '/boot/Image.lzma' to addr 0x00000000...
Unhandled exception: Store/AMO access fault

Signed-off-by: Ben Dooks <ben.dooks@sifive.com>
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
2023-06-06 10:37:25 +02:00
Simon Glass
1e4d965b59 acpi: Put the version numbers in a central place
At present two acpi files are built every time since they use a version
number from version.h

This is not necessary. Make use of the same technique as for the version
string, so that they are build only when they change.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-05-31 17:23:01 -04:00
Jens Wiklander
60f1ba7b68 asm-generic: simplify unaligned.h
The get_unaligned()/put_unaligned() implementations are more
complex than necessary.

Move everything into one file and use a more compact implementation based
on packed struct access and byte swapping macros.

This patch is based on the Linux kernel commit 803f4e1eab7a
("asm-generic: simplify asm/unaligned.h") by Arnd Bergmann.

Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2023-05-31 14:05:34 -04:00
Jens Wiklander
51bcd02dce linux/unaligned: remove unused access_ok.h
linux/unaligned/access_ok.h is unused, so remove it.

Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2023-05-31 14:05:34 -04:00
Tom Rini
f1671205fa include: Remove unused header files
As part of various code clean-ups we have on occasion missed removing
unused header files.  None of these files are referenced anywhere else
at this point.

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-05-31 12:31:47 -04:00
Andre Przywara
a179217e68 faraday: remove orphaned header file
Commit 11232139e3 ("nds32: Remove the architecture") removed the nds32
architecture, and with it the last user of the Faraday AHB controller
header file.

Consequently remove that header file as well.

This was found because the inclusion guard was misspelled.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2023-05-31 12:31:47 -04:00
Andre Przywara
4ee992f7cf imx: fix header inclusion guards
It seems like the header inclusion guards for some IMX related headers
were misspelled or got out of sync.

Make the preprocessor symbols for the #ifndef and #define lines the
same, so that the double inclusion protection works as expected.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2023-05-31 10:11:46 -04:00
Tom Rini
41e289bb1f arm: Remove ti816x_evm board and ti816x SoC support
This platform is currently unmaintained and untested, so remove it.
Further, as it is the only TI816X SoC example, remove related files as
well.

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-05-31 10:11:46 -04:00
Peng Fan
596b9c4e1b arm: dts: imx93: sync device tree with Linux
Sync device tree with next-20230426

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-05-21 16:54:41 +02:00
Peng Fan
298b237f67 imx9: imx93_evk: drop unused macro
Drop unused macro

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-05-21 16:54:40 +02:00
Peng Fan
f991e98b3b imx: firmware: sci: add inline functions when IMX8 not enabled
Since we might reuse some drivers for other platforms, while the drivers
have sci firmware api, so to avoid build failure add inline functions

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-05-21 16:54:40 +02:00
Peng Fan
99ac6c769f imx: move imx8 sci header file to include/firmware/imx
Move imx8 sci header file to include/firmware/imx, then we could
use build macro to reuse some i.MX8 drivers for i.MX9, such as
drivers/cpu/imx8_cpu.c.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Stefano Babic <sbabic@denx.de>
2023-05-21 16:54:32 +02:00
Tom Rini
6e1852ca2c Pull request efi-2023-07-rc3
Documentation:
 
 * update the description of signature algorithms
 
 UEFI:
 
 * fix unaligned access to GUID in HII database protocol
 * fix launching EFI binaries loaded via semihosting
 * fix filling of file path in loaded image protocol for non-block devices
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAmRjIuIACgkQxIHbvCwF
 GsQsZQ/9HijBls1e0WV58F01w3ky0NQoJRVi0ujMEzQuPBkJX1i718f1O+QxJF43
 dpHNiPkXvC9PHDHxBevyC0x0ptsqeNB5Tg5gpl3/M1Ko+23nP4ozhJ6TrtngJ50h
 P9aadOhVAUPH1c4/tIqVFNBI8DrRl8waQ9F8hnycJQ8kw76ye5YBYWwcHKVBwoyc
 1ZIt60M3pBsopQJEVbaoUOc223yYnaV2mLweihndUsRjAI8xO8FNBcyTnDtwazLj
 5F99AnZ1JWH5fYVI+M8ssfMS14SkmdGXH3drbcsQtiUs3k1pFHihBfQdYalfgB/9
 QYsPc7A84Nua+5SajNd6aSFuZCmCXU/4yaAWKIaoKVfGVgsGrRxbqvDuKz3ax4Gb
 jLHWt+mLnk8IrLYNG91QrlA7vUxEcurSUnvq3j69MRUSJWUlDj+bkyGBzWcsdB2K
 niliWo53CFCqRmVL9wf8kLEdaOMV8KJ1V7dxZvbbUa48HccfBXzxbSYnNm1//RYL
 M3jOmBYr0p//I6vLk2P8NWpPqyJUPgrcCHF7RGS8axfa24HMhj2ECJMiXlO8beUx
 CeVov+8GhuRKAcUyf6NaUcbQhyHCk5szEbBKqlH4rwLyuuumOdyB+4SP/WDs7n+x
 +JEqK4m6yfzlkJM9UBHM/yG88DwDhEszk8u22x5/oU9SbYsvTx8=
 =gJu0
 -----END PGP SIGNATURE-----

Merge tag 'efi-2023-07-rc3' of https://source.denx.de/u-boot/custodians/u-boot-efi

Pull request efi-2023-07-rc3

Documentation:

* update the description of signature algorithms

UEFI:

* fix unaligned access to GUID in HII database protocol
* fix launching EFI binaries loaded via semihosting
* fix filling of file path in loaded image protocol for non-block devices
2023-05-16 11:23:30 -04:00
Manorit Chawdhry
6d677ea8ec environment: ti: rproc: fix remoteproc environment variables
During refactor this seemed to have been missed.

Fixes: 65dbb128fb ("include: environment: ti: Use .env for environment variables")

Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-05-15 17:14:46 -04:00
Christophe Leroy
40b77f2a3a envtools lack extra settings since commit 86b9c3e4e4 ("env: Allow U-Boot scripts to be placed in
After converting my targets from CFG_EXTRA_ENV_SETTINGS to
CONFIG_EXTRA_ENV_TEXT as suggested by Tom, I discovered that
fw_setenv doesn't set the entire defaut environment anymore.

I tried to fix it with the below patch, but it fails qemu-x86 CI test,
see https://source.denx.de/u-boot/custodians/u-boot-mpc8xx/-/pipelines/16326
That's the only CI test that fails AFAICS.

Could you help with a solution ? This needs to be fixed.

Thanks
Christophe

---- >8 ----
From: Christophe Leroy <christophe.leroy@csgroup.eu>
Subject: [RFC PATCH] envtools: Fix default environment

After converting some targets from CFG_EXTRA_ENV_SETTINGS to
CONFIG_EXTRA_ENV_TEXT, default environment embedded in
fw_env tool missed all extra settings.

Commit 86b9c3e4e4 ("env: Allow U-Boot scripts to be placed in
a .env file") restricted the inclusion of the content of that
file to builds without USE_HOSTCC.

But as mentionned in commit 79fc0c5f49 ("tools/env: cross-compile
fw_printenv without setting HOSTCC"), HOSTCC and USE_HOSTCC are
kept for code re-use.

Remove the restricting so that settings included in a .env
file are also added to fw_env tool.

Fixes: 86b9c3e4e4 ("env: Allow U-Boot scripts to be placed in a .env file")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
2023-05-15 17:14:46 -04:00
Christophe Leroy
6ab7c3d6ba Fix sparse checks processing
A lot of errors are encountered when building with sparse checking
activated (make C=1 or make C=2).

Many of them are fixed in Linux.

Resynchronise Makefile and include/linux/build_bug.h with Linux
kernel sources by porting the following Linux commits into u-boot:
- 6c49f359ca14 ("kbuild: disable sparse warnings about unknown attributes")
- 80591e61a0f7 ("kbuild: tell sparse about the $ARCH")
- 8788994376d8 ("linux/build_bug.h: change type to int")
- 527edbc18a70 ("build_bug.h: remove most of dummy BUILD_BUG_ON stubs for Sparse")
- c60d3b79423a ("build_bug.h: remove negative-array fallback for BUILD_BUG_ON()")
- 14e83077d55f ("include: drop pointless __compiler_offsetof indirection")

Also revert commit aa9e891c63 ("include/linux/stddef.h: avoid
'warning: preprocessor token offsetof redefined'") because the
error it creates is worse than the warning it is trying to fix.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
2023-05-15 14:08:45 -04:00
Tom Rini
c9b2a78928 Merge https://source.denx.de/u-boot/custodians/u-boot-cfi-flash
- cfi: respect reg address length (Nuno)
2023-05-15 08:33:16 -04:00
Nuno Sá
43bacbe6ab mtd: cfi: respect reg address length
flash_get_size() will get the flash size from the device itself and go
through all erase regions to read protection status. However, the device
mappable region (eg: devicetree reg property) might be lower than the
device full size which means that the above cycle will result in a data
bus exception. This change fixes it by reading the 'addr_size' during
probe() and also use that as one possible upper limit.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
2023-05-15 10:00:30 +02:00
Tom Rini
17f6e6cc49 Merge branch 'master_rzn1/rzn1' of https://source.denx.de/u-boot/custodians/u-boot-sh
- R-Car RZN1 support
2023-05-14 11:29:45 -04:00
Simon Glass
79f663515a bootstd: Rename distro and syslinux to extlinux
We use the terms 'distro' to mean extlinux but they are not really the
same. 'Distro' could refer to any method of booting a distribution,
whereas extlinux is a particular method.

Also we sometimes use syslinux, but it is better to use the same term in
all cases.

Rename distro to syslinux and also update bootstd uses of syslinux to use
extlinux instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-05-13 09:52:32 -04:00
Simon Glass
9fea3a799d usb: Tidy up the usb_start flag
This should be declared in a header file so that type-checking works
correctly.

Add a single declaration to usb.h and remove the others.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2023-05-13 09:52:32 -04:00
Heinrich Schuchardt
c7c0ca3767 efi_loader: fix efi_dp_from_file()
* When called from efi_dp_from_name() we miss to append the filename
  for non-block devices.
* expand_media_path() could be simplified by using efi_dp_from_file to
  prepend the device path of the boot device.

This can be avoided by passing a device path to efi_dp_from_file() instead
of a block device descriptor and a partition number.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-05-13 11:09:51 +02:00
Ilias Apalodimas
7dfab39855 efi_loader: Fix warnings for unaligned accesses
Tom reports that when building with clang we see this warning:
field guid within 'struct efi_hii_keyboard_layout' is less aligned than 'efi_guid_t' and is usually due to 'struct efi_hii_keyboard_layout' being packed, which can lead to unaligned accesses [-Wunaligned-access]

This happens because 'struct efi_hii_keyboard_layout' is defined as
packed and thus has 1-byte alignment but efi_guid_t is a type that
requires greater alignment than that.

However the EFI spec describes the EFI_GUID as
"128-bit buffer containing a unique identifier value.
Unless otherwise specified"

So convert the efi_guid_t -> u8 b[16] here and skip the alignment
requirements.  Since the struct is packed to begin with, it makes no
difference on the final memory layout.

Suggested-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reported-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2023-05-13 11:09:51 +02:00
Ralph Siemsen
afdfcb11f9 tools: spkgimage: add Renesas SPKG format
Renesas RZ/N1 devices contain BootROM code that loads a custom SPKG
image from QSPI, NAND or USB DFU. Support this format in mkimage tool.

SPKGs can optionally be signed, however creation of signed SPKG is not
currently supported.

Example of how to use it:

tools/mkimage -n board/schneider/rzn1-snarc/spkgimage.cfg \
	-T spkgimage -a 0x20040000 -e 0x20040000 \
	-d u-boot.bin u-boot.bin.spkg

The config file (spkgimage.cfg in this example) contains additional
parameters such as NAND ECC settings.

Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-05-13 04:01:30 +02:00
Ralph Siemsen
e87c869db3 board: schneider: add RZN1 board support
Add support for Schneider Electric RZ/N1D and RZ/N1S boards, which
are based on the Reneasas RZ/N1 SoC devices.

The intention is to support both boards using a single defconfig, and to
handle the differences at runtime.

Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-05-13 04:01:30 +02:00
Ralph Siemsen
4647a84b6c ARM: dts: add devicetree for Renesas RZ/N1 SoC
This is taken directly from Linux kernel 6.3
(commit 457391b0380335d5e9a5babdec90ac53928b23b4)

Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-05-13 04:01:30 +02:00
Ralph Siemsen
2d67a095dc ram: cadence: add driver for Cadence EDAC
Driver for Cadence EDAC DDR controller, as found in the Renesas RZ/N1.

Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-05-13 04:01:30 +02:00
Ralph Siemsen
e4aea57fa7 pinctrl: renesas: add R906G032 driver
Pinctrl/pinconf driver for Renesas RZ/N1 (R906G032) SoC.

This is quite rudimentary right now, and only supports applying a
default pin configuration as specified by the device tree.

Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-05-13 04:01:30 +02:00
Simon Glass
55171aedda dm: Emit the arch_cpu_init_dm() even only before relocation
The original function was only called once, before relocation. The new
one is called again after relocation. This was not the intent of the
original call. Fix this by renaming and updating the calling logic.

With this, chromebook_link64 makes it through SPL.

Fixes: 7fe32b3442 ("event: Convert arch_cpu_init_dm() to use events")
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-05-11 10:25:29 +08:00
Simon Glass
368fd56466 x86: coreboot: Collect the address of the ACPI tables
At present any ACPI tables created by prior-stage firmware are ignored.
It is useful to be able to view these in U-Boot.

Pick this up from the sysinfo tables and display it with the cbsysinfo
command. This allows the 'acpi list' command to work when booting from
coreboot.

Adjust the global_data condition so that acpi_start is available even if
table-generation is disabled.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2023-05-11 10:25:29 +08:00
Simon Glass
37bf44073b acpi: Move the table-finding functions into the libary
This is useful for other features. Move the function into library code
so it can be used outside just the 'acpi' command.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2023-05-11 10:25:29 +08:00
Troy Kisky
1781ec67f4 power: pmic: add dm style definitions if not CONFIG_IS_ENABLED(POWER_LEGACY)
This avoids an error in converting to CONFIG_IS_ENABLED(DM_PMIC).
Many boards SPL code needs these definitions to compile, even if
the functions are not linked.

Signed-off-by: Troy Kisky <troykiskyboundary@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-05-10 16:45:42 -04:00
Troy Kisky
55e4505dd2 ofnode: fdt_support definitions needed if OF_CONTROL is enabled
With the use of CONFIG_IS_ENABLED in code, instead of at the preprocessor
level, these defines are still needed if OF_CONTROL is enabled.

Signed-off-by: Troy Kisky <troykiskyboundary@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-05-10 16:45:42 -04:00
Troy Kisky
97c0db6ca5 config_distro_bootcmd: remove booting environment variables from SPL environment
SPL environments don't need commands that they can never use.
Avoid errors with CONFIG_IS_ENABLED conversions by skipping them now.

Signed-off-by: Troy Kisky <troykiskyboundary@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-05-10 16:45:42 -04:00
Tom Rini
0a9a4384c1 Merge tag 'u-boot-rockchip-20230509' of https://source.denx.de/u-boot/custodians/u-boot-rockchip
- Rockchip NFC driver update and dev addr pointer api update;
- use standard dr_mode for usb driver;
- rock pi boards dts update;
- Add rk3566 Anbernic boards;
- Misc fixes for drivers;
2023-05-09 12:45:49 -04:00
Josua Mayer
dfda0c0140 cmd: tlv_eeprom: remove use of global variable current_dev
Make tlv_eeprom command device selection an explicit parameter of all
function calls.

Signed-off-by: Josua Mayer <josua@solid-run.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
2023-05-08 10:47:05 +02:00
Tom Rini
1917a1a8a8 Merge branch 'for-2023.07-2' of https://source.denx.de/u-boot/custodians/u-boot-mpc8xx
This pull request adds misc fixes for cssi boards and activates
CPM relocation in order to enable the use of SCC4 in
QMC (QUICC Multi-Channel) mode.
2023-05-07 09:44:27 -04:00
Chris Morgan
6cf6fe2537 board: rockchip: add Anbernic RGXX3 Series Devices
The Anbernic RGxx3 is a "pseudo-device" that encompasses the following
devices:

 - Anbernic RG353M
 - Anbernic RG353P
 - Anbernic RG353V
 - Anbernic RG353VS
 - Anbernic RG503

The rk3566-anbernic-rgxx3.dtsi is synced with upstream Linux, but
rk3566-anbernic-rgxx3.dts is a U-Boot specific devicetree that
is used for all RGxx3 devices.

Via the board.c file, the bootloader automatically sets the correct
fdtfile, board, and board_name environment variables so that the
correct devicetree can be passed to Linux. It is also possible to
simply hard-code a single devicetree in the boot.scr file and use
that to load Linux as well.

The common specifications for each device are:

 - Rockchip RK3566 SoC
 - 2 external SDMMC slots
 - 1 USB-C host port, 1 USB-C peripheral port
 - 1 mini-HDMI output
 - MIPI-DSI based display panel
 - ADC controlled joysticks with a GPIO mux
 - GPIO buttons
 - A PWM controlled vibrator
 - An ADC controlled button

All of the common features are defined in the devicetree synced from
upstream Linux.

TODO: DSI panel auto-detection for the RG353 devices (requires porting
of DSI controller driver and DSI-DPHY driver to send DSI commands to
the panel).

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-05-06 17:45:05 +08:00
Johan Jonker
53c5093b2e include: fdtdec: decouple fdt_addr_t and phys_addr_t size
The DT specification supports CPUs with both 32-bit and 64-bit addressing
capabilities. In U-boot the fdt_addr_t and phys_addr_t size are coupled
by a typedef. The MTD NAND drivers for 32-bit CPU's can describe partitions
with a 64-bit reg property. These partitions synced from Linux end up with
the wrong offset and sizes when only the lower 32-bit is passed.
Decouple the fdt_addr_t and phys_addr_t size as they don't necessary
match.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-05-06 17:28:18 +08:00
Johan Jonker
aa4f61a776 core: fdtaddr: add devfdt_get_addr_size_index_ptr function
Add devfdt_get_addr_size_index_ptr function with the same
functionality as devfdt_get_addr_size_index, but instead
a return pointer is given.

Suggested-by: Michael Nazzareno Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-05-06 17:28:18 +08:00
Johan Jonker
0fbb96964b core: remap: fix regmap_init_mem_plat() reg size handeling
The fdt_addr_t and phys_addr_t size have been decoupled.
A 32bit CPU can expect 64-bit data from the device tree parser,
so convert regmap_init_mem_plat() input to handel both. The
syscon class driver also makes use of the regmap_init_mem_plat()
function, but has no way of knowing the format of the
device-specific platform data. In case of odd reg structures other
then that the syscon class driver assumes the regmap must be
filled in the individual syscon driver before pre-probe.
Also fix the ARRAY_SIZE divider in the syscon class driver.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-05-06 17:28:18 +08:00
Johan Jonker
aecae81a35 include: dm: ofnode: fix headers
When fdt_addr_t and phys_addr_t are split it turns out that
the header don't match the functions, so fix the headers.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-05-06 17:28:18 +08:00
Ehsan Mohandesi
6de98b60ba net: ipv6: Add support for default gateway discovery.
In IPv6, the default gateway and prefix length are determined by receiving
a router advertisement as defined in -
https://www.rfc-editor.org/rfc/rfc4861.

Add support for sending router solicitation (RS) and processing router
advertisements (RA).

If the RA has prefix info option and following conditions are met, then
gatewayip6 and net_prefix_length of ip6addr env variables are initialized.
These are later consumed by IPv6 code for non-local destination IP.

- "Router Lifetime" != 0
- Prefix is NOT link-local prefix (0xfe80::/10)
- L flag is 1
- "Valid Lifetime" != 0

Timing Parameters:
- MAX_RTR_SOLICITATION_DELAY (0-1s)
- RTR_SOLICITATION_INTERVAL (4s) (min retransmit delay)
- MAX_RTR_SOLICITATIONS (3 RS transmissions)

The functionality is enabled by CONFIG_IPV6_ROUTER_DISCOVERY and invoked
automatically from net_init_loop().

Signed-off-by: Ehsan Mohandesi <emohandesi@linux.microsoft.com>
Tested-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>Reviewed-by:
Tested-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Tested-by: Sergei Antonov <saproj@gmail.com>
Reviewed-by: Sergei Antonov <saproj@gmail.com>
2023-05-05 17:58:52 -04:00
Nishanth Menon
09005c2fb2 net: phy: Make phy_interface_is_rgmii a switch statement
Recent commit 75d28899e3 ("net: phy: Synchronize PHY interface modes
with Linux") reordered the enum definitions. This exposed a problem
in range checking functions to identify the interface type. Though
this specific api wasn't impacted (all the RGMII definitions remained
within range), this experience should be used to never to have to face
this kind of challenge again.

While it is possible for the phy drivers to use the enums directly,
drivers such as dp83867, dp83869, marvell, micrel_ksz90x1 etc use this
api.

Reported-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-05-05 17:48:44 -04:00
Nishanth Menon
f1a63f7181 net: phy: Drop phy_interface_is_sgmii
Recent commit 75d28899e3 ("net: phy: Synchronize PHY interface modes
with Linux") reordered the enum definitions. This caused the range of
enums that this api was checking to go bad.

There aren't anymore users of phy_interface_is_sgmii, so, just drop
it. Also the protocols are so very different that it makes no sense to
provide a helper wrapper in the hope of reuse for phy drivers.

Reported-by: Tom Rini <trini@konsulko.com>
Suggested-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Suggested-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/all/20230414103852.38705065@dellmb/
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-05-05 17:48:44 -04:00
Dmitrii Merkurev
c8acbbbf08 net: share fastboot boot handle logic between transports
Introduce reboot, boot and continue commands support to
TCP fastboot by moving existing UDP logic into the common module.

Signed-off-by: Dmitrii Merkurev <dimorinny@google.com>
Cc: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
Cc: Simon Glass <sjg@chromium.org>
Сс: Joe Hershberger <joe.hershberger@ni.com>
Сс: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-05-05 17:48:44 -04:00
Dmitrii Merkurev
443d319180 net: add fastboot TCP support
Known limitations are
1. fastboot reboot doesn't work (answering OK but not rebooting)
2. flashing isn't supported (TCP transport only limitation)

The command syntax is
fastboot tcp

Signed-off-by: Dmitrii Merkurev <dimorinny@google.com>
Cc: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
Cc: Simon Glass <sjg@chromium.org>
Сс: Joe Hershberger <joe.hershberger@ni.com>
Сс: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-05-05 17:48:44 -04:00
Dmitrii Merkurev
08fb8da371 net: support being a TCP server to unblock TCP fastboot
Make following changes to unblock TCP fastboot support:

1. Implement being a TCP server support
2. Introduce dedicated TCP traffic handler (get rid of UDP signature)
3. Ensure seq_num and ack_num are respected in net_send_tcp_packet
function (make sure existing wget_cmd code is reflected with the fix)

Signed-off-by: Dmitrii Merkurev <dimorinny@google.com>
Cc: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
Cc: Simon Glass <sjg@chromium.org>
Сс: Joe Hershberger <joe.hershberger@ni.com>
Сс: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-05-05 17:48:44 -04:00
Sean Edmond
7d0188927b net: dhcp6: pxe: Add DHCP/PXE commands for IPv6
Adds commands to support DHCP and PXE with IPv6.

New configs added:
- CMD_DHCP6
- DHCP6_PXE_CLIENTARCH
- DHCP6_PXE_DHCP_OPTION
- DHCP6_ENTERPRISE_ID

New commands added (when IPv6 is enabled):
- dhcp6
- pxe get -ipv6
- pxe boot -ipv6

Signed-off-by: Sean Edmond <seanedmond@microsoft.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-05-05 17:48:44 -04:00
Sean Edmond
a0245818f7 net: dhcp6: Add DHCPv6 (DHCP for IPv6)
Adds DHCPv6 protocol to u-boot.

Allows for address assignement with DHCPv6 4-message exchange
(SOLICIT->ADVERTISE->REQUEST->REPLY).  Includes DHCPv6 options
required by RFC 8415.  Also adds DHCPv6 options required
for PXE boot.

Possible enhancements:
- Duplicate address detection on DHCPv6 assigned address
- IPv6 address assignement through SLAAC
- Sending/parsing other DHCPv6 options (NTP, DNS, etc...)

Signed-off-by: Sean Edmond <seanedmond@microsoft.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-05-05 17:48:44 -04:00
Sean Edmond
5e541c48a7 net: ipv6: IPv6 environment variable cleanup
Fix "setenv gatewayip6".

Synchronize IPv6 local variables with environment variables
in netboot_update_env()

Signed-off-by: Sean Edmond <seanedmond@microsoft.com>
2023-05-05 13:41:55 -04:00
Ioana Ciornei
3f1983d460 drivers: net: ldpaa: export driver name and API to get DPMAC id
Export the ldpaa_eth_get_dpmac_id() function so that it can be used from
other drivers, especially by fsl-mc which will need it the next patch.
Also, create a macro for the Ethernet ldpaa driver name and export it as
well.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
2023-05-05 13:41:55 -04:00
Tom Rini
ab75996ba4 - enable video support in SPL
- support splash screen for TI am62x
  - replace #ifdef and #if with if's in bmp/splash
  - add lm3533 backlight driver
  - add Solomon SSD2825 DSI/LVDS bridge driver
  - add Renesas R61307 and R69328 MIPI DSI panel drivers
  - add tegra DC based PWM backlight driver
  - add generic endeavoru (HTC One X) panel driver
 -----BEGIN PGP SIGNATURE-----
 
 iGwEABECACwWIQSC4hxrSoIUVfFO0kRM6ATMmsalXAUCZFS44Q4cYWd1c3RAZGVu
 eC5kZQAKCRBM6ATMmsalXPcDAJ9JjtVNvOUbS8mW51dHvmCYIP/tFwCfbfYTNVmq
 jvfn5+wAnkARJxcU6G8=
 =zXBt
 -----END PGP SIGNATURE-----

Merge tag 'video-for-v2023.07-rc2' of https://source.denx.de/u-boot/custodians/u-boot-video

 - enable video support in SPL
 - support splash screen for TI am62x
 - replace #ifdef and #if with if's in bmp/splash
 - add lm3533 backlight driver
 - add Solomon SSD2825 DSI/LVDS bridge driver
 - add Renesas R61307 and R69328 MIPI DSI panel drivers
 - add tegra DC based PWM backlight driver
 - add generic endeavoru (HTC One X) panel driver
2023-05-05 09:36:08 -04:00
Andrew Davis
837833a724 environment: ti: Add get_fit_config command to get FIT config string
When OE is packaging a dtb file into the FIT image it names the node based
on the dtb filename. Node names can't have "/" so it is turned into "_".
We select our FIT config using the "fdtfile" env var so we don't duplicate
the board_name to fdt logic. Result is fdtfile needs mangled when used to
select a config node from OE made FIT image. Do this here.

Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2023-05-04 13:03:54 -04:00
Christophe Leroy
bebb8dfabc powerpc: mpc8xx: Reorganise init RAM
Using SMC relocation microcode patch or USB-SOF microcode patch
will disable DPRAM memory from 0x2000 to 0x2400 and from 0x2f00
to 0x3000.

At the time being, init RAM is setup to use 0x2800-0x2e00, but
the stack pointer goes beyond 0x2800 and even beyond 0x2400.

For the time being we are not going to use any microcode patch
that uses memory about 0x3000, so reorganise setup to use:
- 0x2800 - 0x2e00 for init malloc and global data and CPM buffers
- 0x3000 - 0x3c00 for init stack

For more details about CPM dual port ram, see
commit b1d62424cb ("powerpc: mpc8xx: redistribute data in CPM dpram")

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
2023-05-04 12:40:47 +02:00
Heinrich Schuchardt
f8816a8a91 dm: core: fix introduce uclass_get_device_by_of_path
Correct the function documentation.

Fixes: ca031c0827 ("dm: core: introduce uclass_get_device_by_of_path()")
Reported-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-05-04 09:57:43 +02:00
Tom Rini
2440719d25 u-boot-imx-20230503
-------------------
 
 - Fixes for : pico-imx6ul, smegw01
 - new boards: DMSSE20, Reform 2
 - fix: get_boot_device, PLL video rate
 
 CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/16211
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCZFJGmw8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76ZirwCggyjQaqPg7dm0OAzfgD2gEoR/058AoI9jLtVd
 JaM9K5RoIu0V1AjBKXQe
 =l+ri
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20230503' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

u-boot-imx-20230503
-------------------

- Fixes for : pico-imx6ul, smegw01
- new boards: DMSSE20, Reform 2
- fix: get_boot_device, PLL video rate

CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/16211
2023-05-03 13:15:12 -04:00
Dzmitry Sankouski
a2612d7c55 starqltechn: use button keyboard driver
Button keyboard driver used to navigate bootmenu entries.

Add gpio buttons, button keyboard driver.
Add gpio keys dts bindings.

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-05-03 09:05:24 -04:00
Yang Xiwen
33f19038cc arm: histb: hi3798mv200: add initial support for Hi3798MV200 HC2910-2AGHD05 board
A board with Hi3798MV200 SoC and various peripherals. Details are in the
board README.md.

Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
2023-05-03 09:05:24 -04:00
Yang Xiwen
08ad608aa2 dt-binding: histb-clock: add clocks definition for Hi3798MV200
These clocks are found on Hi3798MV200

Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
2023-05-03 09:05:24 -04:00
Tom Rini
7a3ee61f55 arm: Remove omap5_uevm board
This platform is unsupported by TI and was never widely distributed.  As
this is untested for a long while and missing some DM conversions,
remove it and related device tree files.

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-05-03 09:05:24 -04:00
Linus Walleij
6f63c296fe board: Add new Broadcom Northstar board
This adds a simple Northstar "BRCMNS" board to be used with
the BCM4708x and BCM5301x chips.

The main intention is to use this with the D-Link DIR-890L
and DIR-885L routers for loading the kernel into RAM from
NAND memory using the BCH-1 ECC and using the separately
submitted SEAMA load command, so we are currently not adding
support for things such as networking.

The DTS file is a multiplatform NorthStar board, designed to
be usable with several NorthStar designs by avoiding any
particulars not related to the operation of U-Boot.

If other board need other ECC for example, they need to
create a separate DTS file and augment the code, but I don't
know if any other users will turn up.

Cc: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-05-02 14:23:58 -04:00
Linus Walleij
8a5122bfd3 arm: dts: Import device tree for Broadcom Northstar
This brings in the main SoC device tree used by the
Broadcom Northstar chipset, i.e. BCM4709x and BCM5301x.
This is taken from the v6.3 Linux kernel.

Cc: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-05-02 14:23:58 -04:00
Svyatoslav Ryhel
5f650fa6ad dm: extcon: add an uclass for extcon
Add a new simple uclass for extcon. Currently all setup is done
in the probe. Uclass struct and ops are empty for now.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-05-02 14:23:34 -04:00
Fabio Estevam
6171278765 smegw01: Convert CFG_EXTRA_ENV_SETTINGS to an env file
Currently, it is recommended to move from CFG_EXTRA_ENV_SETTINGS to
an env file, so do the conversion.

Suggested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
2023-05-02 10:57:32 +02:00
Eduard Strehlau
a1bc4f1937 smegw01: Add lockdown U-Boot env support
Add lockdown U-Boot env support so that only certain U-Boot environment
variables are allowed to be modified.

Signed-off-by: Eduard Strehlau <eduard@lionizers.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-05-02 10:57:32 +02:00
Eduard Strehlau
f3ce9db85a smegw01: Switch to fitImage
Instead of loading the zImage kernel and the devicetree separately, switch
to the fitImage format, which is more convenient when working with secure
boot, for example.

Signed-off-by: Eduard Strehlau <eduard@lionizers.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-05-02 10:57:32 +02:00
Eduard Strehlau
b1bbdf1541 smegw01: Change default boot device to eMMC
Let eMMC be the default boot medium.

Signed-off-by: Eduard Strehlau <eduard@lionizers.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-05-02 10:57:32 +02:00
Eduard Strehlau
31c6c79a01 smegw01: Enable EMMC boot from multiple partitions
GPT Partition labels are used for determining the right
root filesystem to boot from.

The U-Boot environment is configured to reside in the eMMC hardware
boot partition we are currently booted from.

This should enable a dual copy approach for upgrading the bootloader.
One can overwrite the inactive hardware partition with new bootloader
and environment and afterwards switch the eMMC boot partition for an
atomic bootloader switch.

Signed-off-by: Eduard Strehlau <eduard@lionizers.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-05-02 10:57:32 +02:00
Eduard Strehlau
52726d24d6 smegw01: Only commit to new partition if update was successful
When performing rootfs update via swupdate, it is convenient to check the
'ustate' variable to decide whether the update succeeded or not.

Signed-off-by: Eduard Strehlau <eduard@lionizers.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-05-02 10:57:32 +02:00
Eduard Strehlau
440dc0694b smegw01: Run altbootcmd in the case of failure
Run the altbootcmd script if any step of bootcmd fails.

This ensures that always a valid image can be run.

Signed-off-by: Eduard Strehlau <eduard@lionizers.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-05-02 10:57:32 +02:00
Eduard Strehlau
ac52bb99cc smegw01: Add altbootcmd
Add an altbootcmd script, which is convenient way to integrate with
swupdate and perform a roll back of the previous working version in the
case of update failure.

Signed-off-by: Eduard Strehlau <eduard@lionizers.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-05-02 10:57:32 +02:00
Eduard Strehlau
7f932c6b84 smegw01: Enable setting additional boot params
Introduce EXTRA_BOOTPARAMS to allow passing additional parameters
to kernel command line. This is useful for debugging purposes.

Signed-off-by: Eduard Strehlau <eduard@lionizers.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-05-02 10:57:32 +02:00
Oliver Graute
3bc6257e80 imx: support i.MX8QM DMSSE20 a1 board
Add i.MX8QM DMSSE20 a1 board support

U-Boot 2023.04-00030-g7be2f547b2 (Apr 21 2023 - 11:11:43 +0200)

Model: Advantech iMX8QM DMSSE20
Board: DMS-SE20A1 8GB
Build: SCFW 549b1e18, SECO-FW c9de51c0, ATF 5782363
Boot:  USB
DRAM:  8 GiB
Core:  100 devices, 19 uclasses, devicetree: separate
MMC:   FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... OK
In:    serial@5a060000
Out:   serial@5a060000
Err:   serial@5a060000
Net:   eth0: ethernet@5b040000
Warning: ethernet@5b050000 (eth1) using random MAC address - 32:05:0c:f9:5e:10
, eth1: ethernet@5b050000
Hit any key to stop autoboot:  0

Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
2023-05-02 10:57:32 +02:00
Patrick Wildt
ebe2e0c309 board: mntre: imx8mq: Add MNT Reform 2 board support
The MNT Reform 2 is a modular DIY laptop.  In its initial version it
is based on the BoundaryDevices i.MX8MQ SoM.  Some parts have been
lifted from BoundaryDevices official U-Boot downstream project.

Signed-off-by: Patrick Wildt <patrick@blueri.se>
Tested-by: Vagrant Cascadian <vagrant@debian.org>
Tested-by: Vagrant Cascadian <vagrant@debian.org>
Signed-off-by: Stefano Babic <sbabic@denx.de>
2023-05-02 10:57:22 +02:00
Tom Rini
27dc882644 Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sunxi
Please pull the second part of the sunxi pull request for this cycle.
Another bunch of patches that replace old-school U-Boot hacks with
proper DM based code, this time for the raw NAND flash driver, and the
USB PHY VBUS detection code. Plus two smaller patches that were sitting
in my inbox for a while.

Gitlab CI passed. In lack of some supported board with NAND flash I
couldn't really test this part, but apparently this was tested by the
reviewer. I briefly ran the branch on some boards with USB-OTG, and
this still worked.
2023-04-30 21:29:50 -04:00
Tom Rini
fe3a77cb15 Merge branch 'for-2023.07' of https://source.denx.de/u-boot/custodians/u-boot-mpc8xx
This pull request adds support for the last CPU board from
CS GROUP France (previously CSSI).

That CPU board called CMPCPRO has a mpc8321E CPU (Family PQII PRO hence
its name) and can be plugged in place of the CMPC885 board.

In order to support that new board, the following changes are included
in this series:
- Make the mpc8xx watchdog driver more generic for reusing it
with mpc83xx
- Fix various small problems on mpc83xx platform
- Add a GPIO Driver for QE GPIOs
- Add support for mpc832x into mpc83xx SPI driver
- Refactor existing board code that will be shared with new board
- Add the new board
2023-04-29 09:29:41 -04:00
Rasmus Villemoes
ca031c0827 dm: core: introduce uclass_get_device_by_of_path()
There's quite a few instances of board-specific code doing

  off = fdt_path_offset(gd->fdt_blob, ...);
  ...
  ret = uclass_get_device_by_of_offset(..., off, &dev);

looking for an eeprom or a pmic via some alias. Such code can be
simplified a little if we have a helper for directly getting a device
via device tree path (including being given as an alias).

Implement it in terms of ofnode rather than raw offsets so that this
will work whether live tree is enabled or not.

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2023-04-28 11:48:59 -06:00
Heinrich Schuchardt
1a07d39521 sandbox: fix return type of os_filesize()
Given a file ../img of size 4294967296 with GPT partition table and
partitions:

=> host bind 0 ../img
=> part list host 0
Disk host-0.blk not ready

The cause is os_filesize() returning int. File sizes must use off_t.

Correct all uses of os_filesize() too.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-04-28 11:30:17 -06:00
Andrew Davis
c71ee7e163 binman: Use unsigned long over typedef ulong
The header binman_sym.h depends on ulong typedef but does not include
types.h. This means the header must be included after including types.h
or a header that includes it.

We could include types.h but instead let's just switch from ulong
to directly using unsigned long. This removes the need for typedef'ing
it in some of the tests, so also remove those.

Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-04-28 11:30:17 -06:00
Heinrich Schuchardt
b52d6de207 common: static fdt_simplefb_enable_existing_node()
Function fdt_simplefb_enable_existing_node() should be static as it is not
used outside common/fdt_simplefb.c.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-04-28 11:30:17 -06:00
Christophe Leroy
4d0c8db74d board: cssi: Add CPU board CMPCPRO
CSSI has another CPU board, similar to the CMPC885 board
that get plugged on the two base boards MCR3000_2G and MIAE.

That CPU board is called CMPCPRO because it has a MPC8321E CPU,
also known as Power QUICC II PRO.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
2023-04-28 17:52:23 +02:00
Christophe Leroy
78ba7b61da board: cssi: Move all mother board code into common.c
All the code used to manage the mother boards will be
common to soon to come CPU board.

Move all that code into common.c

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
2023-04-28 17:52:23 +02:00
Samuel Holland
09cbd3858f gpio: axp/sunxi: Remove virtual VBUS detection GPIO
Now that this functionality is modeled using the device tree and
regulator uclass, the named GPIO is not referenced anywhere. Remove it.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2023-04-28 01:30:24 +01:00
Samuel Holland
1eb09081f6 mtd: nand: sunxi: Convert from fdtdec to ofnode
As a first step toward converting this driver to the driver model, use
the ofnode abstraction to replace direct references to the FDT blob.

Using ofnode_read_u32_index removes an extra pair of loops and makes the
allwinner,rb property optional, matching the devicetree binding.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2023-04-28 01:06:57 +01:00
Abdellatif El Khlifi
f37af2760e drivers/mtd/nvmxip: introduce NVM XIP block storage emulation
add block storage emulation for NVM XIP flash devices

Some paltforms such as Corstone-1000 need to see NVM XIP raw flash
as a block storage device with read only capability.

Here NVM flash devices are devices with addressable
memory (e.g: QSPI NOR flash).

The implementation is generic and can be used by different platforms.

Two drivers are provided as follows.

  nvmxip-blk :

    a generic block driver allowing to read from the XIP flash

  nvmxip Uclass driver :

        When a device is described in the DT and associated with
        UCLASS_NVMXIP, the Uclass creates a block device and binds it with
	 the nvmxip-blk.

Platforms can use multiple NVM XIP devices at the same time by defining a
DT node for each one of them.

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
2023-04-27 17:01:14 -04:00
Simon Glass
8b1b943a7a ide: Avoid preprocessor for CONFIG_LBA48
Use IS_ENABLED() instead for all conditions. Add the 'lba48' flag into
struct blk_desc always, since it uses very little space. Use a bool so
the meaning is clearer.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2023-04-27 13:51:06 -04:00
Simon Glass
1b33fd8317 ide: Make function static
Only one function is called from outside this file. Make all the others
static.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-04-27 13:51:06 -04:00
Simon Glass
646deed40b ide: Correct use of ATAPI
The use of atapi_read() was incorrect dropped. Fix this so that it will
be used when needed. Use a udevice for the first argument of atapi_read()
so it is consistent with ide_read().

This requires much of the ATAPI code to be brought out from behind the
existing #ifdef. It will still be removed by the compiler if it is not
needed.

Add an atapi flag to struct blk_desc so the information can be retained.

Fixes: 145df842b4 ("dm: ide: Add support for driver-model block devices")
Fixes: d0075059e4 ("ide: Drop non-DM code for BLK")
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-04-27 13:51:06 -04:00
Simon Glass
1486c90623 ide: Create a prototype for ide_set_reset()
This is used by a board so should be in the header file. Add it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-04-27 13:51:06 -04:00
Simon Glass
f8e87e73e4 ide: Drop weak functions
These are not used from outside this file anymore. Make them static and
remove them from the header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-04-27 13:51:06 -04:00
Simon Glass
62d13fa634 ide: Drop ide_device_present()
This function is not used anymore. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-04-27 13:51:06 -04:00
Simon Glass
80778f505c ide: Move ide_init() into probing
At present the code does ide_init() as a separate operation, then calls
device_probe() to copy over the information. We can call ide_init() from
probe just as easily.

The only difference is that using 'ide init' twice will do nothing.
However it already fails to copy over the new data in that case, so the
effect is the same. For now, unbind the block devices and remove the IDE
device, which causes the bus to be probed again. Later patches will fix
this up fully, so that all blk_desc data is copied across.

Since ide_reset() is only called from ide_init(), there is no need to init
the ide_dev_desc[] array. This is already done at the end of ide_init() so
drop this code.

The call to uclass_first_device() is now within the probe() function of
the same device, so does nothing. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-04-27 13:51:06 -04:00
Simon Glass
00a79f21c1 ide: Drop init for not using BLK
ALl boards use CONFIG_BLK now so this code is not used. Drop it and the
header-file #ifdef

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-04-27 13:51:06 -04:00
Simon Glass
0917851100 ide: Drop CONFIG_START_IDE
This is not used by any board. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-04-27 13:51:06 -04:00
Simon Glass
14a4f52b0d ide: Move ATA_CURR_BASE to C file
This is not used outside one C file. Move it out of the header to
reduce its visbility.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-04-27 13:51:06 -04:00
Simon Glass
4204c50cbb rockchip: Use the same boot_targets for all boards
It doesn't really matter if we mention things which are not present. For
example, if 'nvme' is included but the board does not support it, it just
continues with the next item in the list.

It is simpler to use the same target list for all boards, so drop the
different one for rk3399.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-04-26 08:43:05 -04:00
Simon Glass
7755dc58af rockchip: Move to standard boot
Drop the distro-boot scripts and use standard boot instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
2023-04-26 08:43:05 -04:00
Simon Glass
1736b4af0e bootstd: Report missing labels only when asked
Use the -l flag to indicate whether to report missing uclasses.

Also try to be more helpful when no devices are found. For example, when
we see something 'scsi0' requested and nothing was found, this indicates
that there are no SCSI devices, so show a suitable message.

Move messages out of the low-level functions so that silent operation
is possible.

This means they are never reported unless BOOTSTD_FULL is enabled, since
the -l flag cannot otherwise be set.

Suggested-by: Tom Rini <trini@konsulko.com>

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-04-26 08:43:04 -04:00
Sinan Akman
23fd87c489 mpc8379erdb: Convert to using DM_SERIAL
Convert to DM_SERIAL for mpc8379erdb.

Signed-off-by: Sinan Akman <sinan@writeme.com>
2023-04-25 15:31:28 -04:00
Nikhil M Jain
990bf2f38f include: configs: am64x_evm: Change to using .env
Move to using .env file for setting up environment variables for am64x.

Signed-off-by: Nikhil M Jain <n-jain1@ti.com>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
2023-04-25 15:31:27 -04:00
Will Deacon
37e53db38b virtio: Allocate bounce buffers for devices with VIRTIO_F_IOMMU_PLATFORM
In preparation for bouncing virtio data for devices advertising the
VIRTIO_F_IOMMU_PLATFORM feature, allocate an array of bounce buffer
structures in the vring, one per descriptor.

Signed-off-by: Will Deacon <willdeacon@google.com>
[ Paul: pick from the Android tree. Rebase to the upstream ]
Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Link: 3e052749e7
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-04-25 11:53:15 -04:00
Will Deacon
75582fc2e6 virtio: Allocate virtqueue in page-size units
In preparation for explicit bouncing of virtqueue pages for devices
advertising the VIRTIO_F_IOMMU_PLATFORM feature, introduce a couple
of wrappers around virtqueue allocation and freeing operations,
ensuring that buffers are handled in terms of page-size units.

Signed-off-by: Will Deacon <willdeacon@google.com>
[ Paul: pick from the Android tree. Rebase to the upstream ]
Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Link: b4bb5227d4
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-04-25 11:53:15 -04:00
Nikhil M Jain
9eeb1a299d common: Replace #ifdef and #if with if's
Avoid using preprocessor compilation directives and instead use simple
logical expressions for better readability since compiler will anyway
optimize out the respective code block if condition is not satisfied.

Signed-off-by: Nikhil M Jain <n-jain1@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
2023-04-24 21:37:45 +02:00
Nikhil M Jain
25127ea388 include: Enable video related global data variable and splash at SPL
To include video related global data variables and splash functions at
SPL and u-boot proper, use CONFIG_IS_ENABLED.

Replace CONFIG_CMD_BMP with CONFIG_BMP to enable splash_display function
at u-boot proper and SPL.

Signed-off-by: Nikhil M Jain <n-jain1@ti.com>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-04-24 21:37:45 +02:00
Nikhil M Jain
58182b2db9 cmd: bmp: Split bmp commands and functions
To enable splash screen at SPL, need to compile cmd/bmp.c which also
includes bmp commands, since SPL doesn't use commands split bmp.c into
common/bmp.c which includes all bmp functions and cmd/bmp.c which only
contains bmp commands.

Add function delclaration for bmp_info in video.h.

Signed-off-by: Nikhil M Jain <n-jain1@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-04-24 21:37:45 +02:00
Andrew Davis
b4d10f0ae5 configs: j721s2_evm.h: Remove refrences to J7200 EVM
The J7200 EVM will not include this file, this J7200 checks look
to be a copy/paste errora from j721e_evm.h, which J7200 *can* include.

Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2023-04-24 13:18:47 -04:00
Tom Rini
328fdeb9c9 Merge tag 'u-boot-rockchip-20230421' of https://source.denx.de/u-boot/custodians/u-boot-rockchip
- Add rk3588 evb support;
- Update pinctrl for rk3568 and rk3588;
- Update rk3288 dts;
- Update mmc support for rk3568 and rk3588;
- Add rng support for rk3588;
- Add DSI support for rk3568;
- Some other misc fixes in dts, config, driver;
2023-04-23 12:15:56 -04:00
Tom Rini
39bc4e12ab Pull request for efi-2023-07-rc1-2
Documentation:
 
 * Describe Python coding style
 
 UEFI:
 
 * Enable tests for authenticated capsules on the sandbox
 * Fix pylint warnings
 * Correct struct efi_hii_keyboard_layout definition
 -----BEGIN PGP SIGNATURE-----
 
 iQJWBAABCABAFiEEK7wKXt3/btL6/yA+hO4vgnE3U0sFAmRCfmEiHGhlaW5yaWNo
 LnNjaHVjaGFyZHRAY2Fub25pY2FsLmNvbQAKCRCE7i+CcTdTS0OfD/9UtsWvbQTV
 iAITWI5guuqNrOJbaah3Pp+qyBcrMOytWKpt0rcQFmyEqkJGpWMIYusjIAYtTv2r
 azVPcFR8hxhymdoUURdNsCjgTLQ6lemuUfINUmFyBJvyupwj3N7378XGh4C6dRjr
 YVdb5dQE+6PQRt5d3YPbzGaPJoEPjhI+IJPWgiOTBKuHtgCFW505ah33UAQulxh/
 tmd3gZhkK/6+svf1NxHKQS+eW1BZ/NUvju5G5wrsLQdkCYB7CLwELpxV+oQtp46Y
 FAmjJ268EH6iLnpJfFjdz9Gf1XTlVC81yNp+tpsJp8qbSUiyThKn2YTygN/6KcN1
 rnslgxsK1uh8jctmfX5D9asu2czGFJ7XBE/JIMHQIlctxEdbzAjF/2LYbcqbiAe8
 HTg2UXCnpEycIHB3FFh1HYcX0Ka/yVJOTB3x25eols+NiytqanjYHZ0BwQiQnyCp
 y8zEWKZZi1rqWrZK6RuakYNRpSdT8QJG1MrCJY1+CL4FZAe9tiO1+nXhkBhfhRpE
 GiD0a07PAh3F8bglrAbSPIVbpuYs28hCF96spA5WixyCsnr2dvl6uoVL0/PflcN9
 NGFd9mVO4gwg7d9VgJ+QW+kVwaY+HDLKKkC+mESuKHgc6PInwUpYT2DPBMlJ+65c
 B398snFzs4gfv8udepY9sPkzRyv6+vjgEg==
 =/TcM
 -----END PGP SIGNATURE-----

Merge tag 'efi-2023-07-rc1-2' of https://source.denx.de/u-boot/custodians/u-boot-efi

Pull request for efi-2023-07-rc1-2

Documentation:

* Describe Python coding style

UEFI:

* Enable tests for authenticated capsules on the sandbox
* Fix pylint warnings
* Correct struct efi_hii_keyboard_layout definition
2023-04-22 18:32:08 -04:00
Tom Rini
802132c48a Merge https://source.denx.de/u-boot/custodians/u-boot-riscv
* Add StarFive VisionFive v2 Board support
* Support CONFIG_REMAKE_ELF
* Code cleanups for RISC-V architecture
2023-04-22 18:31:46 -04:00
Tom Rini
da142d1ec9 Merge https://source.denx.de/u-boot/custodians/u-boot-watchdog
- watchdog: arm_smc_wdt: add watchdog support (Lionel)
- watchdog: ftwdt010: return a previously deleted driver now ported to
  DM (Sergei)
- watchdog: Add a watchdog driver for Raspberry Pi boards (Etienne)
2023-04-22 18:31:21 -04:00
Jonas Karlman
e1962a9efe rockchip: rk35xx: Enable fdtoverlay and kernel compression
Add fdtoverlay_addr_r, kernel_comp_addr_r and imply use of
OF_LIBFDT_OVERLAY on RK3568 and RK3588 to support fdtoverlay
and kernel compression.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-04-21 15:16:01 +08:00
Kever Yang
cf8658cdac board: rockchip: Add rk3588 evb
rk3588 evb1 v10 is a evalution board from Rockchip, it is a dev board for
rockchip and also a reference board for board vendors.

Hardware:
SoC: RK3588
DRAM: LPDDR4X 8GB
Debug: UART2 via USB
PCIe: 3x4 *1
SATA *2
HDMI out *2
HDMI IN *1
USB2.0 Host *2
USB3.0 Host *1
Type C *1
MIPI DSI panel

dts Sync from Linux v6.2.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Jagan Teki <jagan@edgeble.ai>
2023-04-21 15:16:00 +08:00
Ilias Apalodimas
b10bfd0019 efi_loader: Fix flexible array member definitions
When a structure contains a flexible array member, it is not supposed to be
included in arrays or other structs.
Quoting the C spec [0]
"Such a structure (and any union containing, possibly recursively, a
member that is such a structure) shall not be a member of a structure
or an element of an array."

IOW efi_hii_keyboard_layout should not include
struct efi_key_descriptor descriptors[]; since we use it at the
declaration of struct efi_hii_keyboard_package.

[0] https://www.dii.uchile.cl/~daespino/files/Iso_C_1999_definition.pdf
chapter 6.7.2.1

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-04-21 08:50:35 +02:00
Yanhong Wang
5ecf9b0b8a board: starfive: add StarFive VisionFive v2 board support
Add board support for StarFive VisionFive v2.

Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
2023-04-20 16:08:44 +08:00
Jianlong Huang
d60f384938 dt-bindings: pinctrl: Add StarFive JH7110 pinctrl definitions
Add pinctrl definitions for StarFive JH7110 SoC.

Signed-off-by: Kuan Lim Lee <kuanlim.lee@linux.starfivetech.com>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
2023-04-20 16:08:44 +08:00
Yanhong Wang
58c9c60b64 dt-bindings: clock: Add StarFive JH7110 clock definitions
Add all clock outputs for the StarFive JH7110 clock generator.

Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com>
Acked-by: Sean Anderson <seanga2@gmail.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
2023-04-20 16:08:44 +08:00
Yanhong Wang
c10483045e dt-bindings: reset: Add StarFive JH7110 reset definitions
Add resets for the StarFive JH7110 system(SYS),system-top-group(STG) and
always-on(AON) reset controller.

Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
2023-04-20 16:08:44 +08:00
Patrice Chotard
ac31663c9c configs: stm32mp13: Increase usb_pgood_delay for ST boards
With some USB device, the current usb_pgood_delay value is not long
enough to ensure a correct detection.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2023-04-19 09:45:34 +02:00
Patrice Chotard
7950b1dcf1 configs: stm32mp15: Add usb_pgood_delay for ST boards
Add usb_pgood_delay to ensure a correct detection of USB devices.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2023-04-19 09:45:33 +02:00
Sergei Antonov
6e44bb0c10 watchdog: ftwdt010: return a previously deleted driver now ported to DM
The ftwdt010 watchdog driver was deleted by
commit 11232139e3 ("nds32: Remove the architecture")

Return it to the codebase in a DM compatible form. Enable it in
sandbox_defconfig to test compilability.
Another platform using ftwdt010 will be submitted later.

Signed-off-by: Sergei Antonov <saproj@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2023-04-18 08:42:43 +02:00
Tom Rini
5db4972a5b Pull request for u-boot-nand-20230417
The first two patches are by Frieder Schrempf who joins as a reviewer for
 the SPI NAND framework and drivers.
 
 The following 2 patches are by Linus Walleij and are taken by the series
 "Add Broadcom Northstar basic support".
 
 Bin Meng makes static a list for octeontx.
 
 Francesco Dolcini specifies MTD partitions on command line for
 colibri-{imx6ull,imx7}.
 -----BEGIN PGP SIGNATURE-----
 
 iQJYBAABCgBCFiEE6GOTDNYiFygVXvMmQBtB6IWRjvEFAmQ9ALMkHGRhcmlvLmJp
 bmFjY2hpQGFtYXJ1bGFzb2x1dGlvbnMuY29tAAoJEEAbQeiFkY7x6YMP/3vW6t7v
 R0y3pGS0CcZhOtxLKH2Z5KbC6qoFmkK40vqvrKyUX1m4haJ+4A6BJR/rvdTCNftP
 2ezpSF5SV7ZnG6+DIuY3Zvh7Jr9+ApuMmsm2vPeg8bv8gevzq3dHMk8msZb3P9+c
 YX0FOpukZcJiYI9p2d+AFBLS2ETvfOYNhcfGu9PP1LdlChu1VL5BTwxmiKPuNf7D
 6Rte3he0JubiLGp3CnLnj+o2l2OVrj+Kokv+jBCVVDtaVujD8tUCT+FJ/8FrXgFS
 S/IOxV1DwhaxGHEjzM6ozq94b2lKB1v9PvapmveQSRmY+O01Q108uFUxMw5G6RyS
 tEzoqdTk6u5Gzv/arsbXNSPe6i41QY454NqA5tOdUYprMQKM8k/P+ow9c5r4VRMH
 YybBqYMAYs/9qmhBBfHhMnwEpzpHxBVTBTWtdqEIP85FcDgDV6HOs3imx05VnMe4
 jfUBja5I0rzo9i7tvOhOOr4KTA1Qdg4xGTEm2nvKXHoIrGm3pC4wY54Q1F2UNm1b
 osyqUh9pHqlgy+/8VPsUmu8zoewH/j4tGl1JRhYPd2QmYPlI7lDkhRtOBGOzBDAF
 xvUQd5F2sYw6bDe7kiUfoX37Uy8cDupAETEYLpnGqG2/sLDo5p/VPNEiETAbfCmV
 yVTDYvljxy/l3sqTUqbmkYS7V64UUc8tn0ql
 =1lGu
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-nand-20230417' of https://source.denx.de/u-boot/custodians/u-boot-nand-flash

Pull request for u-boot-nand-20230417

The first two patches are by Frieder Schrempf who joins as a reviewer for
the SPI NAND framework and drivers.

The following 2 patches are by Linus Walleij and are taken by the series
"Add Broadcom Northstar basic support".

Bin Meng makes static a list for octeontx.

Francesco Dolcini specifies MTD partitions on command line for
colibri-{imx6ull,imx7}.
2023-04-17 10:47:33 -04:00
Francesco Dolcini
156968211e colibri-imx6ull: specify MTD partitions on command line
Disable fdt_fixup_mtdparts() and pass MTD partition on the command
line. Dynamically editing the fdt with a static partitions configuration
is not required and there is no advantages compared to using the command
line. This change should prevent boot failures as the one in [0].

Cc: Marek Vasut <marex@denx.de>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/all/Y4dgBTGNWpM6SQXI@francesco-nb.int.toradex.com/ [0]
Link: https://lore.kernel.org/all/20230105123334.7f90c289@xps-13/
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/all/20230206224838.75963-4-francesco@dolcini.it/
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
2023-04-16 14:19:27 +02:00
Francesco Dolcini
cba9668e63 colibri-imx7: specify MTD partitions on command line
Disable fdt_fixup_mtdparts() and pass MTD partition on the command
line. Dynamically editing the fdt with a static partitions configuration
is not required and there is no advantages compared to using the command
line. This change should prevent boot failures as the one in [0].

Cc: Marek Vasut <marex@denx.de>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/all/Y4dgBTGNWpM6SQXI@francesco-nb.int.toradex.com/ [0]
Link: https://lore.kernel.org/all/20230105123334.7f90c289@xps-13/
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/all/20230206224838.75963-3-francesco@dolcini.it/
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
2023-04-16 14:18:13 +02:00
Marek Vasut
35d48ea8c0 arch: m68k: Use existing CONFIG_MCFTMR instead of CFG_MCFTMR
There is an existing CONFIG_MCFTMR Kconfig symbol,
use it and drop all other instances of CFG_MCFTMR.
This duality is likely a result of bogus conversion
to Kconfig.

Fixes: 7ff7b46e6c ("m68k: rename CONFIG_MCFTMR to CFG_MCFTMR")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-04-15 21:36:07 +02:00
Angelo Dureghello
db457e682a board: stmark2: add i2c0 pinmux pad configuration
Add CFG option to enable proper pinmux pad setting for i2c0.

Signed-off-by: Angelo Dureghello <angelo@kernel-space.org>
2023-04-11 06:51:38 +02:00
Loic Poulain
eeb739a6fd mmc: Check support for TRIM operations
When secure/insecure TRIM operations are supported.
When used as erase command argument it applies the
erase operation to write blocks instead of erase
groups.

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2023-04-10 12:17:11 +09:00
Tom Rini
7daa8dd59b Pull request for efi-2023-07-rc1
Documentation:
 
 * man-page for coninfo command
 * documentation style
 * switch settings for boot modes on AM62 SK
 
 UEFI:
 
 * avoid using deprecated HandleProtocol()
 * set static attribute for non-exported functions and variables
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAmQxz2YACgkQxIHbvCwF
 GsTxqw/+L3uDNDa9a5f9M2AX/HIoUtdkmhvLeIrE5NlJufV9razkPRN6uUvYpeeJ
 YJDkYxEkNZmNmliFagsVJEXjxgQGdEh/P0SLffkX89Bg5u1DhP1Rfx5vf7RcbM77
 m54+m4lRiYYi4woq/i7l3jqusSUTX4amDbO/3eIXVmSko61xiu1L4+0Mhe8lYWwo
 FTGkg2+eOtnZ/u+hmTT+6XXyXkAXCZOjcEc25SnEfA7rtlIyzaJOb2+XPXr8q2nc
 GMGg9QItTu0aDHarkunuflHpXQ/APs9AtY7Q8pj0Ko2IXvCu2OXFu+mRgquHrNKJ
 0koN69Ie2mqt7kzImInu5KtGRli5Vf1M820L5Y//BdvX+emGK3ccx4ywj9+yZQSr
 qo+ch7hup19sT/g8+wsG3cwYfn6qQyGz73rkSYB2D2ris2o5xoTgOsnyuFFHTQrv
 Zwj79/DTkgcPUvzCnUkH1sz2HKi/J3h44L5aTVM7bslrJL4AgXzlcssr4cM4ElwT
 aAUJKfX5AukrIhw2AA6f/FYrdEW5yt8oiNPfIs5x0bYNsWcooMBdE5ZYvqJPy2Mp
 2U/dDHYWNbKOFP6od3eyjCHTp4mC1BTiCcVQ9Zhp3T/E/Ehfu65vWHaf1LwcjRFL
 z44cZGny341WoMZzImgj+ciPWABzbMEWCfb7Indva3tlFVCFZ1U=
 =bYxY
 -----END PGP SIGNATURE-----

Merge tag 'efi-2023-07-rc1' of https://source.denx.de/u-boot/custodians/u-boot-efi

Pull request for efi-2023-07-rc1

Documentation:

* man-page for coninfo command
* documentation style
* switch settings for boot modes on AM62 SK

UEFI:

* avoid using deprecated HandleProtocol()
* set static attribute for non-exported functions and variables
2023-04-09 11:08:39 -04:00
Bin Meng
ee23830b6e efi: loader: Make efi_event_queue and efi_register_notify_events static
efi_event_queue and efi_register_notify_events are only referenced
in efi_boottime.c

Signed-off-by: Bin Meng <bmeng@tinylab.org>
2023-04-08 07:46:44 +02:00
Tom Rini
965f74b5b3 Merge branch 'master_sh/gen4/initial' of https://source.denx.de/u-boot/custodians/u-boot-sh
- Initial R-Car Generation 4 support
2023-04-07 15:55:50 -04:00
Hai Pham
36b63c92c3 ARM: renesas: Add R8A779G0 V4H White Hawk board code
Add board code for R8A779G0 V4H White Hawk board.

Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[Marek: Synchronize configuration symbols which are now switched to Kconfig
        Mallocate gd->bd->bi_boot_params, i.e. drop the assignment
        Sort headers, use clrbits_le32(), use BIT macros where appropriate
        Use CONFIG_SYS_CLK_FREQ for counter frequency instead of custom macro]
2023-04-07 17:13:28 +02:00
Tho Vu
0296ec364d dt-bindings: clock: Add R8A779G0 V4H CPG Core Clock Definitions
Add all Clock Pulse Generator Core Clock Outputs for the
Renesas R-Car V4H (R8A779G0) SoC from Linux next
commit 058f4df42121 ("Add linux-next specific files for 20230228")

Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Tho Vu <tho.vu.wh@renesas.com>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[Marek: Update to linux next 20230228 state]
2023-04-07 17:13:28 +02:00
Tho Vu
3813c3c0a5 dt-bindings: power: Add R8A779G0 V4H SYSC power domain definitions
Add power domain indices for R-Car V4H (R8A779G0) from Linux next
commit 058f4df42121 ("Add linux-next specific files for 20230228")

Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Tho Vu <tho.vu.wh@renesas.com>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[Marek: Update to linux next 20230228 state]
2023-04-07 17:13:28 +02:00
Hai Pham
558d10620b ARM: renesas: Add R8A779F0 S4 Spider board code
Add board code for R8A779F0 S4 Spider board.

Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[Marek: Synchronize configuration symbols which are now switched to Kconfig
        Mallocate gd->bd->bi_boot_params, i.e. drop the assignment
	Sort headers, use clrbits_le32(), use BIT macros where appropriate
	Use CONFIG_SYS_CLK_FREQ for counter frequency instead of custom macro]
2023-04-07 17:13:28 +02:00
Hai Pham
32e6893caf ARM: rmobile: Turn R-Car V3U into R-Car Gen4
Despite the name, R-Car V3U is the first member of the R-Car Gen4
family [1]. Hence reflect this in related files, select appropriate
configuration options and split DT build into its own GEN4 entry.

[1] https://www.renesas.com/us/en/products/automotive-products/automotive-system-chips-socs/r-car-v3u-best-class-r-car-v3u-asil-d-system-chip-automated-driving

Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[Marek: Deduplicate DTC_FLAGS addition using RCAR_64 symbol
        Update commit message]
2023-04-07 17:13:28 +02:00
Tho Vu
2fa93af66a dt-bindings: clock: Add R8A779F0 S4 CPG Core Clock headers
Add definitions for R8A779F0 S4 CPG Core Clock headers from Linux next
commit 058f4df42121 ("Add linux-next specific files for 20230228")

Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Tho Vu <tho.vu.wh@renesas.com>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[Marek: Update to linux next 20230228 state]
2023-04-07 17:13:28 +02:00
Tho Vu
ec6f6acac1 dt-bindings: power: Add R8A779F0 S4 SYSC power domain definitions
Add power domain indices for R-Car S4 (R8A779F0) from Linux next
commit 058f4df42121 ("Add linux-next specific files for 20230228")

Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Tho Vu <tho.vu.wh@renesas.com>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[Marek: Update to linux next 20230228 state]
2023-04-07 17:13:28 +02:00
Hai Pham
bbe36e29ca serial: sh: Add HSCIF support for R-Car SoC
Provide the basic HSCIF support for R-Car SoC.

Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[Marek: Fill in HSSRR offset for Gen2 and SCBRR calculation for Gen2 and Gen3]
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-04-07 17:13:28 +02:00
Tom Rini
19d0c64f89 Merge branch 'master_net/phy/prep-cleanup' of https://source.denx.de/u-boot/custodians/u-boot-sh
- PHY framework cleanups
2023-04-07 10:51:49 -04:00
Hai Pham
5a3b074255 ARM: rmobile: Add R-Car Generation 4 support
This adds R-Car Generation 4 (Gen4) support as Renesas ARM64 SoC.

In this version, reusing R-Car Gen3 lowlevel initialize routine [1]
and R-Car Gen3 memory map tables [2] .

[1] arch/arm/mach-rmobile/lowlevel_init_gen3.S
[2] arch/arm/mach-rmobile/memmap-gen3.c

Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[Marek: - Enable DTO support by default
        - Sort the Kconfig lists
	- Select RCAR_64 Kconfig option to pull in all the shared
	  Kconfig options with Gen3, and use where applicable to
	  deduplicate entries.
	- Fix reference [2] typo in commit message
	- Drop config options moved to Kconfig, rename rest to CFG_
	  accordingly to synchronize with upstream changes. Drop
	  removed CONFIG_VERY_BIG_RAM.
        - Move board size limit to arch/Kconfig
	- Move GICR_BASE to headers instead of common config]
2023-04-07 14:33:46 +02:00
Marek Vasut
b0177a24d4 phy: Add .set_mode and .set_speed callbacks
Add two new callbacks matching the Linux ones. The .set_mode is used to set
PHY mode and submode, where mode is either USB, Ethernet, and so on, while
submode is e.g. for Ethernet case RGMII, RMII, and so on. The .set_speed is
used to configure link speed into the PHY. Unlike the existing configure
callback, which is used to pass arbitrary custom information to the PHY,
these two callbacks are used to pass standardized set of information to
the PHY.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-04-07 14:23:26 +02:00
Marek Vasut
12a8efbcdd phy: Fix kerneldoc alignment
Insert missing space in front of asterisk to avoid checkpatch warning.
Replace 'beeing' with 'being' as well, to fix another checkpatch warning.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-04-07 14:23:26 +02:00
Marek Vasut
ab9b812989 phy: Add empty generic_phy_configure() implementation for PHY disabled case
In case PHY is not enabled, the generic_phy_configure() implementation is
missing. Add an empty one so that the list of empty functions is complete.

Fixes: f8da8a82c5 ("generic-phy: add configure op")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-04-07 14:23:26 +02:00
Marek Vasut
9e53d5f580 net: phy: Add MDIO PCS 2.5G and 5G speed macros from Linux
Add MDIO PCS 2.5G and 5G speed macros from Linux 5.1.y as of commit
7fd8afa8933a0 ("net: phy: Add generic support for 2.5GBaseT and 5GBaseT")
This is used by the upcoming Marvell 10G PHY driver.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-04-07 14:21:37 +02:00
Marek Vasut
1f614d5246 net: phy: Add phy_read_mmd_poll_timeout() from Linux
Add phy_read_mmd_poll_timeout() from Linux 5.7.y as of commit
bd971ff0b7392 ("net: phy: introduce phy_read_mmd_poll_timeout macro")
This is used by the upcoming Marvell 10G PHY driver.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-04-07 14:21:37 +02:00
Marek Vasut
87b7502824 net: phy: Add phy_modify_mmd() and phy_modify_mmd_changed() from Linux
Add phy_modify_mmd()/phy_modify_mmd_changed() from Linux 5.1.y as of commit
b8554d4f7288f ("net: phy: add register modifying helpers returning 1 on change")
This is used by the upcoming Marvell 10G PHY driver.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-04-07 14:21:37 +02:00
Marek Vasut
bf3dabb7de net: phy: marvell: Import and use marvell_phy.h from Linux
Import marvell_phy.h from Linux 5.14.y as of commit
a5de4be0aaaa6 ("net: phy: marvell10g: fix differentiation of 88X3310 from 88X3340")
and use it in marvell PHY driver instead of current ad-hoc macros.
Two of the PHY IDs are unknown to Linux, 88E1149S and 88E1680, for
those two, only sync the length of the hexadecimal number to 8 digits.

No functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-04-07 14:21:37 +02:00
Marek Vasut
75d28899e3 net: phy: Synchronize PHY interface modes with Linux
Synchronize PHY interface modes with Linux next 6.2.y commit:
0194b64578e90 ("net: phy: improve phy_read_poll_timeout")

Retain LX2160A/LX2162A PHY modes as those are not yet supported
by the Linux kernel, but isolate those with ifdeffery.

Isolate NCSI which are also not supported by Linux kernel. Note
that the ifdeffery cannot be avoided with IS_ENABLED() here due
to compilation of the entire conditional, which would fail in
case NCSI symbols are not available.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-04-07 14:20:53 +02:00
Marek Vasut
166ea49750 net: mvpp2: Replace PHY_INTERFACE_MODE_SFI with 5GBASER/10GBASER/XAUI
Replace PHY_INTERFACE_MODE_SFI with PHY_INTERFACE_MODE_5GBASER,
PHY_INTERFACE_MODE_10GBASER and PHY_INTERFACE_MODE_XAUI to match
Linux PHY interface modes.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-04-07 14:20:53 +02:00
Marek Vasut
7da03bbc57 net: phy: Drop unused phy_register()
This function is no longer used, drop it.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:51 +02:00
Marek Vasut
8728d4c032 net: phy: Drop static phy_drivers list
The static phy_drivers list is superseded by linker list of struct phy_drivers
now that all drivers have been converted to the later. Drop the phy_drivers
list as well as list_head from struct phy_driver.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:51 +02:00
Marek Vasut
20bd8e4fcb net: phy: gen10g: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:51 +02:00
Marek Vasut
53ef8d79f2 net: phy: xilinx-gmii2rgmii: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:50 +02:00
Marek Vasut
81a8728c83 net: phy: ncsi: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:50 +02:00
Marek Vasut
7f4e6c2ae1 net: phy: fixed: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:50 +02:00
Marek Vasut
5c359aa712 net: phy: mscc: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:50 +02:00
Marek Vasut
330d64f5a0 net: phy: intel-xway: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:50 +02:00
Marek Vasut
6620b9204d net: phy: xilinx: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:50 +02:00
Marek Vasut
fb5cf1bb42 net: phy: vitesse: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:50 +02:00
Marek Vasut
5b777fe527 net: phy: ti: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

This particular PHY driver is slightly more spread out across additional
source files. Since the phy_register() calls are no longer necessary, all
the registration calls across those source files is dropped. Furthermore,
the Makefile can now be updated to only compile generic TI PHY support if
matching Kconfig symbol is enabled and the ifdeffery in the generic TI PHY
driver can be dropped.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:50 +02:00
Marek Vasut
787a67f471 net: phy: teranetics: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:50 +02:00
Marek Vasut
2ea350c466 net: phy: smsc: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:50 +02:00
Marek Vasut
f2e0be396e net: phy: realtek: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:50 +02:00
Marek Vasut
1965f2aa65 net: phy: nxp-tja11xx: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:49 +02:00
Marek Vasut
d1296d44de net: phy: nxp-c45-tja11xx: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:49 +02:00
Marek Vasut
390e3fcd4e net: phy: natsemi: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:49 +02:00
Marek Vasut
3b96dc7513 net: phy: meson-gxl: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:49 +02:00
Marek Vasut
6b5eea7508 net: phy: ksz90x1: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:49 +02:00
Marek Vasut
f282e32d0a net: phy: ksz8xxx: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:49 +02:00
Marek Vasut
9010be953e net: phy: marvell: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:49 +02:00
Marek Vasut
f10c893815 net: phy: lxt: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:49 +02:00
Marek Vasut
b20c53a93f net: phy: et1011c: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:49 +02:00
Marek Vasut
abdbfad25c net: phy: mv88e61xx: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:49 +02:00
Marek Vasut
7e9ce5adf6 net: phy: davicom: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:49 +02:00
Marek Vasut
579f359269 net: phy: cortina: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:48 +02:00
Marek Vasut
227650f0e7 net: phy: ca_phy: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:48 +02:00
Marek Vasut
c00f3f826f net: phy: broadcom: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:48 +02:00
Marek Vasut
761e4060fe net: phy: b53: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:48 +02:00
Marek Vasut
fba31ab92c net: phy: atheros: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:48 +02:00
Marek Vasut
a5fbc10560 net: phy: aquantia: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:48 +02:00
Marek Vasut
4de8644504 net: phy: adin: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:48 +02:00
Marek Vasut
7940a93eb9 net: phy: Iterate over both registered PHYs and struct phy_driver linker list
Introduce U_BOOT_PHY_DRIVER() macro which is used to add struct phy_driver
into a new linker list section containing all compiled in struct phy_driver
drivers. This is so far empty until PHY drivers are converted over to this
macro.

Iterate over both drivers registered using soon to be legacy phy_register()
as well as drivers in the new linker list when looking up a suitable PHY
driver. This way, PHY drivers can be converted over to the new macro one
driver at a time.

The relocation of callbacks for linker list based drivers now happens in
phy_init() call as the drivers are available at that point in time, and
phy_register() is not called for those drivers.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:48 +02:00
Patrick Delaunay
94c8da2121 lmb: Fix LMB_MEMORY_REGIONS flag usage
Remove test on CONFIG_LMB_MEMORY_REGIONS introduced by commit
7c1860fce4 ("lmb: Fix lmb property's defination under struct lmb").

This code in lmb_init() is strange, because if CONFIG_LMB_USE_MAX_REGIONS
and CONFIG_LMB_MEMORY_REGIONS are not defined, the implicit #else is empty
and the required initialization is not done:
lmb->memory.max = ?
lmb->reserved.max = ?

But this setting is not possible:
- CONFIG_LMB_USE_MAX_REGIONS not defined
- CONFIG_LMB_MEMORY_REGIONS not defined
because CONFIG_LMB_MEMORY_REGIONS and CONFIG_LMB_RESERVED_REGIONS are
defined as soon as the CONFIG_LMB_USE_MAX_REGIONS is not defined.

This patch removes this impossible case #elif and I add some
explanation in lmb.h to explain why in the struct lmb {} the lmb
property is defined if CONFIG_LMB_MEMORY_REGIONS is NOT defined.

This patch also removes CONFIG_LMB_XXX dependency on CONFIG_LMB as these
defines are used in API file lmb.h and not only in library file.

Fixes: 5e2548c1d6 ("lmb: Fix LMB_MEMORY_REGIONS flag usage")
Reported-by: Mark Millard <marklmi@yahoo.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Acked-by: Michal Simek <michal.simek@amd.com>
2023-04-06 15:08:46 -04:00
Tobias Waldekranz
272ec6b453 efi_loader: device_path: support blkmap devices
Create a distinct EFI device path for each blkmap device.

Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-04-05 10:54:47 -04:00
Tobias Waldekranz
762dc78bde blk: blkmap: Add linear device mapping support
Allow a slice of an existing block device to be mapped to a
blkmap. This means that filesystems that are not stored at exact
partition boundaries can be accessed by remapping a slice of the
existing device to a blkmap device.

Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-04-05 10:54:47 -04:00
Tobias Waldekranz
15d9e99a27 blk: blkmap: Add memory mapping support
Allow a slice of RAM to be mapped to a blkmap. This means that RAM can
now be accessed as if it was a block device, meaning that existing
filesystem drivers can now be used to access ramdisks.

Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-04-05 10:54:47 -04:00
Tobias Waldekranz
c41e209ea6 blk: blkmap: Add basic infrastructure
blkmaps are loosely modeled on Linux's device mapper subsystem. The
basic idea is that you can create virtual block devices whose blocks
can be backed by a plethora of sources that are user configurable.

This change just adds the basic infrastructure for creating and
removing blkmap devices. Subsequent changes will extend this to add
support for actual mappings.

Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-04-05 10:54:47 -04:00
Safae Ouajih
57e405e1f4 android: boot: support bootconfig
Support Bootconfig feature.
- The bootconfig feature replaces the androidboot.*
  kernel cmdline options.

This was adapted from downstream [1] commit : 7af0a0506d4d ("cuttlefish:
support bootconfig parameters").

Link:[1] https://android.googlesource.com/platform/external/u-boot/

Signed-off-by: Safae Ouajih <souajih@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2023-04-04 14:50:47 -04:00
Safae Ouajih
636da2039a android: boot: support boot image header version 3 and 4
Enable the support for boot image header version 3 and 4
using abootimg command.

In order to use version 3 or 4:

1- Vendor boot image address should be given to abootimg cmd.

	abootimg addr $1 $vendor_boot_load_addr

2- "ramdisk_addr_r" env variable (ramdisk address) should be set to host
the ramdisk : generic ramdisk + vendor ramdisk

Replace "struct andr_boot_img_hdr_v0*" by "void *" in
some functions since v3 and v4 are now supported as well.

Signed-off-by: Safae Ouajih <souajih@baylibre.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2023-04-04 14:50:47 -04:00
Safae Ouajih
c79a2e6823 android: boot: ramdisk: support vendor ramdisk
Version 3 and 4 of boot image header introduced
vendor boot ramdisk: Please check include/android_image.h
for details.

The ramdisk is now split into a generic ramdisk in boot image
and a vendor ramdisk in vendor boot image.

Support the new vendor ramdisk.

Signed-off-by: Safae Ouajih <souajih@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2023-04-04 14:50:47 -04:00
Safae Ouajih
1115027d2f android: boot: update android_image_get_data to support v3, v4
Since boot image header version 3 and 4 introduced vendor boot image,
use the following functions to fill the generic android
structure : andr_image_data:

 - android_boot_image_v3_v4_parse_hdr()
 - android_vendor_boot_image_v3_v4_parse_hdr()

Update android_image_get_data() to support v3 and v4

Signed-off-by: Safae Ouajih <souajih@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2023-04-04 14:50:47 -04:00
Safae Ouajih
e058176be3 android: boot: add vendor boot image to prepare for v3, v4 support
Introduce vendor boot image for version 3 and 4 of boot image header.
The vendor boot image will hold extra information about kernel, dtb
and ramdisk.

This is done to prepare for boot image version 3 and 4 support.

Signed-off-by: Safae Ouajih <souajih@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2023-04-04 14:50:47 -04:00
Safae Ouajih
f48efa0edb android: boot: kcomp: support andr_image_data
andr_image_data structure is used as a global representation of
boot image header structure. Introduce this new structure to
support all boot header versions : v0,v1.v2.v3.v4 and to support
v3 and v4 while maitaining support for v0,v1,v2.
The need of using andr_image_data comes from the change of header
structure in both version 3 and 4.

Rework android_image_get_kcomp()  to support this new struct.

Signed-off-by: Safae Ouajih <souajih@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2023-04-04 14:50:46 -04:00
Safae Ouajih
fbb645e7d9 android: boot: add boot image header v3 and v4 structures
Add support for v3/v4 boot image format by adding
the following structures:

- andr_boot_img_hdr_v3 : describes boot image header
- andr_vnd_boot_img_hdr : describes vendor boot image header

These definitions have been copied over from the AOSP documentation at
[1] and [2]

Boot arg sizes are taken from [3]:
commit: 35fb6262bc3f (ANDROID: Support for vendor boot)

This also adds documentation for boot image header v3/v4 structure
that was imported from [4], file: include/bootimg/bootimg.h
commit: 8d0922bfb932 (Adding GKI signature in boot.img v4)

Link:[1] https://source.android.com/docs/core/architecture/bootloader/boot-image-header
Link:[2] https://source.android.com/docs/core/architecture/bootloader/partitions/vendor-boot-partitions#vendor-boot-header
Link:[3] https://android.googlesource.com/platform/external/u-boot
Link:[4] https://android.googlesource.com/platform/system/tools/mkbootimg

Signed-off-by: Safae Ouajih <souajih@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2023-04-04 14:50:46 -04:00
Safae Ouajih
734cb47d6d android: boot: replace android_image_check_header
With the new vendor boot image introduced in versions 3 and 4
of boot image header, the header check must be done for both boot
image and vendor boot image. Thus, replace android_image_check_header()
by is_android_boot_image_header() to only refer to boot image header check.

Signed-off-by: Safae Ouajih <souajih@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2023-04-04 14:50:46 -04:00
Safae Ouajih
d71a732af4 android: boot: rename andr_img_hdr -> andr_boot_img_hdr_v0
Android introduced boot header version 3 or 4.
The header structure change with version 3 and 4 to support
the new updates such as:
- Introducing Vendor boot image: with a vendor ramdisk
- Bootconfig feature (v4)

Change andr_img_hdr struct name to maintain support for version v0,
v1 and v2 while introducing version 3 and 4.

Signed-off-by: Safae Ouajih <souajih@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2023-04-04 14:50:46 -04:00
Tom Rini
d0e3378ad7 linker_lists: Rework start/end macros to not rely on undefined behavior
Per the GCC bug listed below, the way we do linker lists is relying on
undefined behavior that seems to work in gcc, but doesn't always work in
clang. Andrew suggests rewriting our start/end macros in a different way
(as implemented here, from what he said in comment 1) to avoid these
problems.

Reported-by: AdityaK <appujee@google.com>
Suggested-by: Andrew Pinski <apinski@marvell.com>
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=108915
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Andrew Pinski <apinski@marvell.com>
2023-04-04 12:24:29 -04:00
Tom Rini
0916377b83 u-boot-imx-next-20230404
------------------------
 
 CI : https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/15887
 
 - boards : DH-Electronics, Toradex, imx8mp-beacon-kit
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCZCv6mg8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76ZIrACfVH9xA0tG8UO87Ap+7h2J4PJU3+gAnA9QhfwC
 vF42NNf2OlnNEVee1jGz
 =vlEI
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-next-20230404' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

u-boot-imx-next-20230404
------------------------

CI : https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/15887

- boards : DH-Electronics, Toradex, imx8mp-beacon-kit
2023-04-04 09:50:13 -04:00
Adam Ford
ab53bd43db arm64: imx: Add support for imx8mp-beacon-kit
Beacon Embedded has an i.MX8M Plus development kit which consists
of a SOM + baseboard.  The SOM includes Bluetooth, WiFi, QSPI, eMMC,
and one Ethernet PHY. The baseboard includes audio, HDMI, USB-C Dual
Role port, USB Hub with five ports, a PCIe slot, and a second Ethernet
PHY.  The device trees are already queued for inclusion in Linux 6.3.

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2023-04-04 09:40:25 +02:00
Marek Vasut
302f7e80b9 ARM: dts: imx: Add support for Data Modul i.MX8M Plus eDM SBC
Add support for Data Modul i.MX8M Plus eDM SBC board. This is an
evaluation board for various custom display units. Currently
supported are serial console, ethernet, eMMC, SD, SPI NOR, USB.

Signed-off-by: Marek Vasut <marex@denx.de>
2023-04-04 09:35:39 +02:00
Marek Vasut
d08c000821 ARM: imx: Enable SDP download in SPL on DH i.MX6 DHSOM
Enable SDP protocol support in SPL for DH i.MX6 DHSOM, now that those
components fit into the SPL due to LTO.

To start U-Boot via SDP upload on i.MX6 DHSOM based board, proceed as follows:
- Compile imx_usb [1] .
- Power off the i.MX6 DHSOM based board.
- Connect both USB-serial console and USB-OTG miniB ports to host PC.
- Switch board to USB boot mode.
- Power on the board.
- Verify using '$ dmesg' that a new device has been detected as follows:
    New USB device found, idVendor=15a2, idProduct=0054, bcdDevice= 0.01
    New USB device strings: Mfr=1, Product=2, SerialNumber=0
    Product: SE Blank ARIK
    Manufacturer: Freescale SemiConductor Inc

- Upload U-Boot SPL:
$ imx_usb u-boot-with-spl.imx

- Wait for SPL to come up, the following print ought to be the last on
  UART console:
SDP: handle requests...

- Upload U-Boot proper:
$ imx_usb u-boot.img

[1] https://github.com/boundarydevices/imx_usb_loader.git

Signed-off-by: Marek Vasut <marex@denx.de>
2023-04-04 09:35:39 +02:00
Tom Rini
288fe30a23 Merge branch 'next'
Signed-off-by: Tom Rini <trini@konsulko.com>
2023-04-03 16:45:41 -04:00
Tom Rini
cfb4c33e89 Fixes for 2023.04
------------------
 
 CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/15831
 
 - fix for imx8mn_bsh_smm_s2
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCZCrCRw8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76ZNGQCfQhul9Qfy0jVXZl/vXDxPJrfv4hQAnjVsNLV9
 SNhV4PXn8+eTt4igrx8e
 =AMYS
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20230403' of https://source.denx.de/u-boot/custodians/u-boot-imx

Fixes for 2023.04
------------------

CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/15831

- fix for imx8mn_bsh_smm_s2
2023-04-03 10:13:36 -04:00
Heinrich Schuchardt
a9203b0fef efi_loader: correct shortening of device-paths
We use short device-paths in boot options so that a file on a block device
can be found independent of the port into which the device is plugged.

Usb() device-path nodes only contain port and interface information and
therefore cannot identify a block device.
UsbWwi() device-path nodes contain the serial number of USB devices.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-04-01 10:11:50 +02:00
Tom Rini
942ac73afc u-boot-imx-next-20230331 for next
---------------------------------
 
 CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/15819
 
 i.MX patches queued for next:
 
 - Conversions to DM_SERIAL
 - Fixes for Toradex boards
 - Gateworks Boards
 - i.MX8ULP
 - EQoS support / fixes, changes in boards
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCZCaU0Q8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76YCKgCgk4OueoIggmes+Ccj8bu1BcQbrfYAoJAgMeKE
 It0hrVAifD62TPb2rmHt
 =hFVG
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-next-20230331' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx into next

u-boot-imx-next-20230331 for next
---------------------------------

CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/15819

i.MX patches queued for next:

- Conversions to DM_SERIAL
- Fixes for Toradex boards
- Gateworks Boards
- i.MX8ULP
- EQoS support / fixes, changes in boards
2023-03-31 12:50:34 -04:00
Dario Binacchi
d8aba36d74 configs: imx8mn_bsh_smm_s2: remove console from bootargs
The Linux kernel device tree already specifies the device to be used for
boot console output with a stdout-path property under /chosen.

Commit 36b661dc91 ("Merge branch 'next'") re-added the console
setting that commit bede82f750 ("configs: imx8mn_bsh_smm_s2: remove
console from bootargs") had previously removed.

Fixes: 36b661dc91 ("Merge branch 'next'")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2023-03-31 10:51:14 +02:00
Evgeny Bachinin
26f923c7cf cli: run_commandf(): small fixups
* vsnprintf() can truncate cmd, hence it makes no sense to launch such
command (it's broken). Moreover, it's better to signalize to the caller
about such case (for facilitating debugging or bug hunting).

* Fix kernel-doc warnings:
  include/command.h:264: info: Scanning doc for run_commandf
  include/command.h:268: warning: contents before sections
  include/command.h:271: warning: No description found for return value
                                  of 'run_commandf'

* Add printf-like format attribute to validate at compile-time the format
string against parameters's type.

* Fix compilation error in case of -Wall, -Werror, -Wextra:
error: variable ‘i’ set but not used [-Werror=unused-but-set-variable]

* Drop extra ret variable.

Signed-off-by: Evgeny Bachinin <EABachinin@sberdevices.ru>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-30 15:09:59 -04:00
Chris Packham
b5f045e12f include: kernel.h: port find_closest() from Linux
The find_closest() macro can be used to find an element in a sorted
array that is closest to an input value. Bring in this macro from
Linux v6.3-rc1-2-g8ca09d5fa354.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-30 15:09:59 -04:00
Rasmus Villemoes
e1c97949ee gpio: allow passing NULL to gpio_request_by_line_name() to search all gpio controllers
The API is more convenient to use if one doesn't have to know upfront
which gpio controller has a line with the name one is searching for,
and arrange to look that device up somehow. Or implement this loop
oneself.

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-30 15:09:59 -04:00
Stephen Carlson
447dfbc063 test: Add test for new command pci_mps
Adds a test for the new pci_mps command to ensure that it can set the
Maximum Payload Size (MPS) of all devices to 256 bytes in the sandbox
environment. Enables the pci_mps command in the sandbox environment so
that this test can be run.

Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
2023-03-30 15:09:59 -04:00
Stephen Carlson
59b1c9be01 cmd: pci: Add command to set MPS of all PCIe devices
Enable tuning of the PCI Express MPS (Maximum Payload Size) of
each device. The Maximum Read Request Size is not altered.

The SAFE method uses the largest MPS value supported by all devices in the
system for each device. This method is the same algorithm as used by Linux
pci=pcie_bus_safe.

The PEER2PEER method sets all devices to the minimal (128 byte) MPS, which
allows hot plug of devices later that might only support the minimum size,
and ensures compatibility of DMA between two devices on the bus.

Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
2023-03-30 15:09:59 -04:00
Andrejs Cainikovs
8bcc7ba108 colibri-imx8x: set bootaux memory base and size
Move i.MX auxiliary core memory base and size configuration
to defconfig where it should belong.

Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
2023-03-30 10:53:01 +02:00
Marcel Ziswiler
2f7f6645b8 colibri-imx8x: update env memory layout
Update the distro config env memory layout for the Colibri iMX8X:

- kernel_comp_addr_r=0xb0000000 temporary area for uncompressing (ie FIT
images or Image.gz booted using booti)
- kernel_comp_size=0x08000000
- loadaddr=0x95400000 avoiding any reserved areas located before that
- fdt_addr_r = loadaddr + 128MB - allows for 128MB kernel
- scriptaddr = fdt_addr_r + 512KB - allows for 512KB fdt
- ramdisk_addr_r = scriptaddr + 512KB - allows for 512KB script

Idea of memory layout taken from commit a9f1e35bed
("apalis-imx8: update env memory layout").

Note that for our regular BSP Layers and Reference Images for Yocto
Project an updated distro boot script is required (see
meta-toradex-bsp-common/recipes-bsp/u-boot/u-boot-distro-boot).

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
2023-03-30 10:52:34 +02:00
Andrejs Cainikovs
aa61f28b19 colibri-imx8x: switch from fatload to load
Make sure M4 binary loading works equally well
on ext4 as well as fat file systems.

Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
2023-03-30 10:51:35 +02:00
Andrejs Cainikovs
77532779d4 colibri-imx8x: drop obsolete environment variables
Drop obsolete environment variables boot_file, bootcmd_mfg,
fdt_addr, finduuid, image, mfgtool_args, mmcargs, mmcdev, mmcpart,
panel, sec_boot, vidargs.

Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
2023-03-30 10:51:02 +02:00
Andrejs Cainikovs
de666551b3 colibri-imx8x: construct fdtfile dynamically
The following expression is used to construct the device tree name:
fdtfile=${soc}-colibri-${fdt_board}.dtb

- soc is set dynamically (either imx8qxp or imx8dx)
- fdt_board can be modified by the user (eval-v3, aster, iris/iris-v2)

Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
2023-03-30 10:50:29 +02:00