Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-20 11:43:22 +00:00
Code Issues Projects Releases Packages Wiki Activity
1756 commits 24 branches 545 tags 332 MiB
Commit graph

972 commits

Author SHA1 Message Date
Wolfgang Denk
97c8d0bbbd Add support for 28F256J3A flash chips 2005-12-22 01:50:50 +01:00
Marian Balakowicz
3a7b142b62 Change port configuration for O2DNT (CODEC1 on PSC1) 2005-12-06 20:33:07 +01:00
Wolfgang Denk
a889bd27ef Fix DPRAM offset/size for MPC8541/8555. 
Simplify TQM85xx Makefile handling.
 2005-12-06 15:02:31 +01:00
Wolfgang Denk
f013dacf0a Code cleanup, especially MIPS for GCC 4.x 2005-12-04 00:40:34 +01:00
Wolfgang Denk
4a86d779ff Merge with /home/sr/git/u-boot 2005-12-01 01:38:13 +01:00
Wolfgang Denk
b6f8435664 Adjust TQM834x PHY addresses for latest hardware revision. 2005-12-01 01:17:24 +01:00
Wolfgang Denk
d00de23b15 Increase malloc arena on TQM5200 board to 256 kB. 
With 64 kb uniform flash sector size the old value of 128 kB was
too small.
 2005-12-01 00:55:19 +01:00
Marian Balakowicz
d9785c14bf Fix miiphy global data initialization (problem on 4xx boards when no 
ethaddr is assigned). Initialization moved from miiphy_register() to
eth_initialize().

Based on initial patch for 4xx platform by Matthias Fuchs.
 2005-11-30 18:06:04 +01:00
Stefan Roese
d96f41e016 Add support for TQM8541/8555 boards, TQM85xx support reworked: 
- Support for TQM8541/8555 boards added.
- Complete rework of TQM8540/8560 support.
- Common TQM85xx code now supports all current TQM85xx platforms
  (TQM8540/8541/8555/8560).
- DDR SDRAM size detection added.
- CAS latency default values can be overwritten by setting "serial#"
  to e.g. "ABC0001 casl=25" -> CAS latency 2.5 will be used.
  If problems are detected with this non default CAS latency,
  the defualt values will be used instead.
- FLASH size detection added.
- Moved FCC ethernet driver initialization behind TSEC driver init
  -> TSEC is first device.

Patch by Stefan Roese, 30 Nov 2005
 2005-11-30 13:06:40 +01:00
Stefan Roese
6e7fb6eaa5 Add support for AMCC 440SP, add support for AMCC Luan 440SP eval board. 
Patch by John Otken, 23 Nov 2005
 2005-11-29 18:18:21 +01:00
Marian Balakowicz
0a69b26ed6 Increase IPB and PCI clocks for O2DNT board. 2005-11-27 20:15:41 +01:00
Stefan Roese
3d9569b232 Changed PPC44x startup message (cpu info, speed...) to common style: 
On PPC44x platforms, the startup message generated in "cpu.c" only
comprised the ppc type and revision but not additional informations
like speed etc. Those speed infos where printed in the board specific
code. This new implementation now prints all CPU infos in the common
cpu specific code. No board specific code is needed anymore and
therefore removed from all current 44x implementations.

Patch by Stefan Roese, 27 Nov 2005
 2005-11-27 19:36:26 +01:00
Wolfgang Denk
f08abe311b Remove unnnecessary #include <linux/types.h> from include/asm-*/u-boot.h 2005-11-25 16:38:03 +01:00
Stefan Roese
5568e613ee Add support for Prodrive P3P440 board: 
- Added onboard PPC440 DDR autodetection in cpu/ppc/sdram.c
- CFG_FLASH_QUIET_TEST added to use the common CFI driver
  for bank autodetection
Patch by Stefan Roese, 22 Nov 2005
 2005-11-22 13:20:42 +01:00
Wolfgang Denk
fe126d8b34 Change all '$(...)' variable references into '${...}' 
which makes the environment compatible with the hush shell.
WARNING: Support for the old '$(...)' syntax will be
discontinued in a later version.
 2005-11-20 21:40:11 +01:00
Stefan Roese
c7911c7e8f Merge with /server/home/stefan/git/u-boot/bamboo-sdram 2005-11-15 16:23:41 +01:00
Stefan Roese
fd49bf0214 Fix Bamboo DDR SDRAM initialization (problem with onboard SDRAM) 
Patch by Stefan Roese, 15 Nov 2005
 2005-11-15 16:04:58 +01:00
Stefan Roese
feaedfcf84 New PPC 405EP board added: CMS700 
Added CONFIG_NET_MULTI for VOM405 board.
Added reset_phy() for VOM405 board.
Patch by Matthias Fuchs, 09 Nov 2005
 2005-11-15 10:35:59 +01:00
Stefan Roese
ea339205a9 Updated PCI mapping for esd CPCI2DP board. 
Add support for error LED.
Patch by Matthias Fuchs, 07 Nov 2005
 2005-11-08 09:00:09 +01:00
Stefan Roese
182e10691f Correct PPC Timebase register definitions (SPRN_TBRL...) 
Patch by Stefan Roese, 07 Nov 2005
 2005-11-07 09:57:57 +01:00
Wolfgang Denk
4d03a21f23 Adjust TQM85x PHY addresses for latest hardware revision. 2005-11-03 11:31:36 +01:00
Wolfgang Denk
8e9655f863 * Add hook to NAND erase and implement nand_wait function. 
Patch by Mike Rapoport, 01 Nov 2005

  Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
 2005-11-02 14:29:12 +01:00
Stefan Roese
57275b69c6 Add support for Ocotea pass 3 with 440GX Rev. F 
Patch by Stefan Roese, 01 Nov 2005
 2005-11-01 10:08:03 +01:00
Wolfgang Denk
5d4ee51061 Merge with /home/m8/git/u-boot 2005-10-29 23:45:04 +02:00
Marian Balakowicz
63ff004c4f Add support for multiple PHYs. 2005-10-28 22:30:33 +02:00
Wolfgang Denk
7b5cac0e19 Merge with /home/wd/git/u-boot/master 2005-10-21 22:41:25 +02:00
Stefan Roese
1e25f957c8 Add NetConsole Support for AMCC eval boards 
Patch by Stefan Roese, 20 Oct 2005
 2005-10-20 16:34:28 +02:00
Rafal Jaworowski
6902df56a0 Add PCI support for the TQM834x board. 2005-10-17 02:39:53 +02:00
Wolfgang Denk
ea1fba136a Merge with /home/sr/git/u-boot 2005-10-17 00:19:16 +02:00
Wolfgang Denk
84bd92bdda Merge with /home/m8/git/u-boot 2005-10-15 18:23:43 +02:00
Stefan Roese
3b6748ea0d Add fat & ext2 support to AMCC 440EP boards Yosemite & Bamboo 
Patch by Stefan Roese, 14 Oct 2005
 2005-10-14 15:37:34 +02:00
Wolfgang Denk
77ddac9480 Cleanup for GCC-4.x 2005-10-13 16:45:02 +02:00
Wolfgang Denk
814d98f24e Add missing files for Pantelis Antoniou's patch 
Patch by Pantelis Antoniou, 04 Sep 2005
 2005-10-13 01:59:29 +02:00
Wolfgang Denk
cbdf8824fa Merge with /home/sr/git/u-boot 2005-10-13 01:55:58 +02:00
Wolfgang Denk
070610c529 Add support for OF flat tree for the STXtc board. 
Patch by Pantelis Antoniou, 04 Sep 2005
 2005-10-13 01:49:09 +02:00
Wolfgang Denk
f57f70aab9 Support passing of OF flat trees to the kernel. 
Patch by Pantelis Antoniou, 04 Sep 2005
 2005-10-13 01:45:54 +02:00
Marian Balakowicz
36247821ef Fix TQM834x config file, set correct value for CFG_IMMRBAR. 2005-10-12 12:45:04 +02:00
Marian Balakowicz
e6f2e90233 Added support for TQM834x boards. 2005-10-11 19:09:42 +02:00
Wolfgang Denk
3df5bea0b0 Add support for NetSilicon NS7520 processor. 
Patch by Art Shipkowski, 12 May 2005

Cleanup.
 2005-10-09 01:41:48 +02:00
Wolfgang Denk
7521af1c7d Add support for AP1000 board. 
Patch by James MacAulay, 07 Oct 2005
 2005-10-09 01:04:33 +02:00
Stefan Roese
c29ab9d71d Fix gzip bmp support (test if malloc fails, warning when truncated). 
Increase CFG_VIDEO_LOGO_MAX_SIZE on HH405 board.
Patch by Stefan Roese, 08 Oct 2005
 2005-10-08 10:19:07 +02:00
Wolfgang Denk
b8e16a3450 Cleanup 2005-10-06 23:44:55 +02:00
Wolfgang Denk
87cb6862b9 Update make target for ARM supported boards. 
Use lowlevel_init() instead of platformsetup() [rename].
Patch by Peter Pearse, 06 Oct 2005
 2005-10-06 17:08:18 +02:00
Wolfgang Denk
6ebc792114 Add JFFS2 support for TRAB board 
Patch by Martin Krause, 25 Aug 2005
 2005-10-06 01:46:57 +02:00
Wolfgang Denk
f5c254d719 Fix the machine-id of the Cogent csb637 board 
Patch by Anders Larsen, 05 Oct 2005
 2005-10-06 01:26:16 +02:00
Wolfgang Denk
78da60773c Complete support for the KwikByte KB920x boards 
Patch by Anders Larsen, 05 Oct 2005
 2005-10-06 01:22:22 +02:00
Wolfgang Denk
645da51097 Add support for Cogent csb637 
Patch by Anders Larsen, 29 Apr 2005
 2005-10-05 02:00:09 +02:00
Wolfgang Denk
080bdb7f3a * Move dm9161.c and lxt972.c into cpu/arm920t/at91rm9200 
Patch by Anders Larsen, 29 Apr 2005

* Fix problems introduced by Patch by Steven Scholz, 02 Mar 2005
  (8e2be51de8)
 2005-10-05 01:51:29 +02:00
Wolfgang Denk
29ca46c445 Fix device partition intialization for SystemACE disks. 
Patch by Stephen Williams, 28 Apr 2005
 2005-10-05 00:25:17 +02:00
Wolfgang Denk
99b0d2851a Added support for KwikByte KB920x boards (based on AT91RM9200) 
Patch by Matt ?? <kb9200_dev@kwikbyte.com>, 27 Apr 2005
 2005-10-05 00:19:34 +02:00
Wolfgang Denk
45237bc00b Add support for S29GL064M-R3 flash chip on xsengine board 
Patch by Kurt Stremerch, 18 Apr 2005
 2005-10-05 00:03:55 +02:00
Wolfgang Denk
9b880bd4d8 Update ARM Integrator boards: 
Correct addessing errors in platform files.
Split off common core module data from Integrator header files to
include/armcoremodule.h.
Patch by Peter Pearse, 04 Oct 2005
 2005-10-04 23:10:28 +02:00
Stefan Roese
9a8d82fd3c Fix 440GR to print correct cpu revision 
Patch by Stefan Roese, 4 Oct 2005
 2005-10-04 15:00:30 +02:00
Stefan Roese
2c7b2ab5a0 Fix problem with SM501 init on HH405 board. 
Patch by Stefan Roese, 30 Sep 2005
 2005-09-30 16:41:12 +02:00
Wolfgang Denk
709d8ec0d8 Fix FEC PHY addresses for TQM85xx boards 2005-09-29 12:16:38 +02:00
Wolfgang Denk
fb34a9a201 Undo change of f6e20fc6ca... to include/configs/trab.h 
(Must have been an accident?)
 2005-09-26 23:40:37 +02:00
Wolfgang Denk
d8e7e0f044 Add support for AT91RM9200 OHCI Controller. 
Patch by Eric Benard, 07 Apr 2005
 2005-09-26 01:26:56 +02:00
Wolfgang Denk
98404649c8 Update ARM mach-types.h 
Patch by Eric Benard, 07 Apr 2005
 2005-09-26 01:18:22 +02:00
Wolfgang Denk
0e4018d244 Add support for MP2USB board. 
Patch by Eric Benard, 07 Apr 2005
 2005-09-26 01:14:38 +02:00
Wolfgang Denk
c570b2fdf5 Add board support for armadillo HT1070 
Patch by Rowel Atienza, 06 Apr 2005
 2005-09-26 01:06:33 +02:00
Wolfgang Denk
c2d0ab4da8 Second Ethernet address enabled for MPC885ADS and MPC8272ADS. 
Patch by Vitaly Bordug, 30 Mar 2005
 2005-09-26 00:53:02 +02:00
Wolfgang Denk
e6f222815c Add iopset command on mpc8xx 
Patch by Daniel Eisenhut, 25 Mar 2005
 2005-09-26 00:44:15 +02:00
Wolfgang Denk
f2af3eb55e Fixes to the Lubbock (PXA 25x) support: 
- Resolve the FIXME with respect to saving the u-boot environment.
- Make the default load address land in real memory.
- Fix lan91c96 SMC_{in,out}{b,w,l}() macros
Patch by David Brownell, 10 Mar 2005
 2005-09-26 00:29:53 +02:00
Wolfgang Denk
8e6f1a8ec2 Add Barco Streaming Video Card (SVC) and Sample Compress Network (SCN) board 
Patch by Marc Leeman, 04 Mar 2005
 2005-09-25 18:59:36 +02:00
Wolfgang Denk
716c1dcb41 Cleanup 2005-09-25 18:49:35 +02:00
Wolfgang Denk
49a7581c6c OMAP242x H4 board update 
- fix for ES2 differences.
- switch to using the cfi_flash driver.
- fix SRAM build address.
- fix for GP device operation.
- unlock SRAM for GP devices.
- display more device information.
- fix potential deadlock in omap24xx_i2c driver.
- fix DLL load values to match dpllout*1 operation.
- fix 2nd chip select init for combo DDR device.
- add support for CFI Intel 28F256L18 on H4 board.
Patch by Richard Woodruff, 03 Mar 2005
 2005-09-25 18:41:04 +02:00
Wolfgang Denk
8e2be51de8 Fix formating in include/asm-arm/arch-at91rm9200/AT91RM9200.h 
Patch by Steven Scholz, 02 Mar 2005
 2005-09-25 17:14:20 +02:00
Wolfgang Denk
b66eb5282d Add cramfs support for m68k 
Patch by Zachary Landau, 21 Feb 2005
 2005-09-25 16:59:36 +02:00
Wolfgang Denk
bd51626c8d Update ep8260: Fix flash timeouts; improve clock resolution for faster UARTs 
Patch by Jeff Angielski, 21 Feb 2005
 2005-09-25 16:56:15 +02:00
Wolfgang Denk
875c78934e Add Xilinx Spartan3 family FPGA support 
Patch by Kurt Stremerch, 14 February 2005
 2005-09-25 16:44:21 +02:00
Wolfgang Denk
1972dc0a9e Added support for PCI bridge on MPC8272ADS 
Patch by Vitaly Bordug, Feb 09 2005
 2005-09-25 16:27:55 +02:00
Wolfgang Denk
0148e8cb43 Update multicore CM9XX support for Integrator AP to allow booting from flash 
Patch by Jean-Paul Saman, 8 Feb 2005
 2005-09-25 16:22:14 +02:00
Wolfgang Denk
6ed6ce62be Fix typos in include/ppc440.h 
Patch by Andrew E Mileski, 04 Feb 2005
 2005-09-25 16:01:42 +02:00
Wolfgang Denk
70a2047ff6 Add Vibren (was Accelent) PXA255 IDP Support 
Patch by Cliff Brake, 04 Feb 2005
 2005-09-25 15:59:01 +02:00
Wolfgang Denk
fe7eb5d88b Cleanup 2005-09-25 02:00:47 +02:00
Wolfgang Denk
74f4304ee7 Add ARM946E cpu and core module targets; remap memory to 0x00000000 
Patch by Peter Pearse, 2 Feb 2005
 2005-09-25 01:48:28 +02:00
Wolfgang Denk
c97a2aaf27 OMAP242x fix for GP device booting 
- Add SRAM unlock for GP devices.
- Change DDR DLL unlock value to allow DPLLout*1 operation.
Patches by Richard Woodruff, 21 Jan 2005:
 2005-09-25 00:59:24 +02:00
Wolfgang Denk
265817c7e6 Add support for AMD's Pb1x00 eval board; 
add MII routines to the au1x00 ethernet driver;
add USB ohci driver (work in progress)
Patch by Thomas Sailer, 20 Jan 2005
 2005-09-25 00:53:22 +02:00
Wolfgang Denk
2b792afcc5 * Fix PHY address argument passing with mii info command 
Patch by Andrew Dyer, 28 Dec 2004

* Cleanup: fix broken builds
 2005-09-24 21:54:50 +02:00
Wolfgang Denk
0c8721a466 Cleanup (PPC4xx is AMCC now) 2005-09-23 11:05:55 +02:00
Wolfgang Denk
1caa70788c Cleanup - update CHANGELOG, undo test settings 2005-09-22 09:34:17 +02:00
Stefan Roese
7644f16f6b esd CPCI2DP board added 
Patch by Matthias Fuchs, 22 Sep 2005
 2005-09-22 09:16:57 +02:00
Stefan Roese
026cb5d864 esd PMC405 board updated 
Patch by Matthias Fuchs, 22 Sep 2005
 2005-09-22 09:07:15 +02:00
Stefan Roese
98f4a3dfcb Add SM501 support to HH405 board. 
Add support for gzip compressed bmp's (CONFIG_VIDEO_BMP_GZIP).
Add support for eeprom write-enable (CFG_EEPROM_WREN).
Patch by Stefan Roese, 22 Sep 2005
 2005-09-22 09:04:17 +02:00
Stefan Roese
5810dc3a2e Fix autonegotiation in tsec ethernet driver 
Patch by Stefan Roese, 21 Sep 2005
 2005-09-21 18:20:22 +02:00
Wolfgang Denk
1806c75959 Update configuration for INKA4x0 board 2005-09-21 10:07:56 +02:00
Wolfgang Denk
29fe1c0fa4 Update configuration for PM854 board 
Based on patch by R. Loeffl, 20 Jul 2005
 2005-09-21 09:59:55 +02:00
Stefan Roese
053b40fa0c Add PCI support to TQM8540 and TQM8560 boards 
Patch by Stefan Roese, 15 Sep 2005
 2005-09-15 14:41:11 +02:00
Stefan Roese
34c0a5e98b Update AMCC Yosemite to get a consistent setup for all AMCC eval 
boards (baudrate, environment...). Flash driver fixed.
Patch by Stefan Roese, 15 Sep 2005
 2005-09-15 11:34:07 +02:00
Wolfgang Denk
ac7eb8a315 Update of new NAND code 
Patch by Ladislav Michl, 13 Sep 2005
 2005-09-14 23:53:32 +02:00
Wolfgang Denk
3edb0ccf61 Merge with /home/wd/git/u-boot/master 2005-09-14 17:06:43 +02:00
Wolfgang Denk
47278471f9 Merge with /home/sr/git/u-boot 2005-09-14 16:59:18 +02:00
Wolfgang Denk
670d9f132d Change default console baud rate for stxxtc board 2005-09-13 00:12:33 +02:00
Stefan Roese
4a3cd9e655 Fix problem in 440GP ethernet driver (ebony). Add support for 2nd 
ethernet port on ebony.
Patch by Stefan Roese, 7 Sep 2005
 2005-09-07 16:21:12 +02:00
Wolfgang Denk
5d244ea128 Merge with /home/sr/git/u-boot: 
Add I2C support for TQM85xx
 2005-09-06 22:17:16 +02:00
Wolfgang Denk
80e238c7f0 Fix default command set (don't include CFG_CMD_DISPLAY command) 
Patch by Pantelis Antoniou, 02 Sep 2005
 2005-09-03 02:22:41 +02:00
Wolfgang Denk
ccd9d3d60c Enable SM712 driver support for HMI1001 board. 2005-09-03 01:21:50 +02:00
Stefan Roese
9d2a873bdf Add I2C support to TQM8540 and TQM8560 boards (EEPROM, RTC, LM75-DTT). 
Removed CFG_CMD_DISPLAY from default commands.
Fixed compiler warning in net.c.
Patch by Stefan Roese, 31 Aug 2005
 2005-08-31 12:55:50 +02:00
Wolfgang Denk
f7fbf269fe Adjust CS3 timings on HMI1001 board for dot matrix display under Linux 2005-08-30 13:43:18 +02:00
Wolfgang Denk
9f96ae44c6 Add keyboard and dot matrix display support for HMI1001 board. 2005-08-30 13:04:12 +02:00
Wolfgang Denk
ec2e5a2cce Merge with testing-4xx_enet (Create generic 4xx Ethernet code) 2005-08-23 23:03:20 +02:00
Wolfgang Denk
d534f5cc38 Add JFFS2 support for TQM5200 board 2005-08-23 22:27:41 +02:00
Stefan Roese
5e4b3361bc Add esd cpci5200 and pf5200 boards 
Patch by Reinhard Arlt, 22 Aug 2005
 2005-08-22 17:51:53 +02:00
Wolfgang Denk
94085698d0 Fix sysclock for TQM8540 and TQM8560 boards 
Patch by Martin Krause, 25 Jul 2005
 2005-08-19 00:55:12 +02:00
Wolfgang Denk
6617aae9b9 Add new board specific commands for TQM5200/STK52XX 
- Sound commands (beep, wav, sound)
- Test commands (led, can, backlight, rs232)
Patch by Martin Krause, 02 May 2005
 2005-08-19 00:46:54 +02:00
Wolfgang Denk
df3c7c8f52 Change main clock on CMC-PU2 board from 207 MHz to 179 MHz 
because of a bug in the AT91RM9200 CPU PLL
Patch by Martin Krause, 22 Apr 2005
 2005-08-19 00:36:45 +02:00
Wolfgang Denk
dbc5819098 Remove CONFIG_AT91RM9200DK in CMC-PU2 configuration 
Patch by Martin Krause, 19 Apr 2005
 2005-08-18 12:21:16 +02:00
Wolfgang Denk
4f562f145a Add RTC support for STK52XX.200 
Patch by Martin Krause, 7 Apr. 2005
 2005-08-18 11:51:12 +02:00
Wolfgang Denk
05b47540aa Merge with testing-NAND (Rewrite of NAND code) 2005-08-17 12:57:49 +02:00
Wolfgang Denk
932394ac43 Rewrite of NAND code based on what is in 2.6.12 Linux kernel 
Patch by Ladislav Michl, 29 Jun 2005
 2005-08-17 12:55:25 +02:00
ef3f9669ae Disable SNTP for O2DNT board. 2005-08-16 22:54:40 +02:00
30eb1770ca CONFIG_PCI_SCAN_SHOW disabled for O2DNT. 2005-08-16 20:39:05 +02:00
Stefan Roese
d6c61aabc4 Merged 405gp_enet.c and 440gx_enet.c to generic 4xx_enet.c 
now handling all 4xx cpu's.
Patch by Stefan Roese, 16 Aug 2005
 2005-08-16 18:18:00 +02:00
22e05df45c Merge with pollux.denx.org:/home/git/u-boot/.git 2005-08-16 17:34:22 +02:00
Wolfgang Denk
98128f389c Enable PCI on hmi1001 board 2005-08-16 15:17:53 +02:00
Wolfgang Denk
3d078ce6d7 Coding style cleanup 2005-08-15 16:03:56 +02:00
Wolfgang Denk
6bdf430660 Add support for Silicon Turnkey eXpress XTc (mpc87x/88x) board. 
Patch by Dan Malek and Pantelis Antoniou, 15 Aug 2005
 2005-08-15 15:55:00 +02:00
Stefan Roese
4dc37144f0 Changed to version 1.1.4 2005-08-15 12:33:29 +02:00
Stefan Roese
b79316f2a2 Add Sandburst Metrobox and Sandburst Karef board support packages. 
Second serial port on 440GX now defined as a system device.
Add 'Short Etch' code for Cicada PHY within 440gx_enet.c
Patch by Travis B. Sawyer, 12 Jul 2005

Check return value of malloc in 440gx_enet.c
Patch by Travis B. Sawyer, 18 Jul 2005
 2005-08-15 12:31:23 +02:00
Wolfgang Denk
2893ecbf3e Fix build problems 2005-08-14 01:52:14 +02:00
Wolfgang Denk
2afbe4ed97 Fix compiler warnings 2005-08-13 02:04:37 +02:00
d4f5c72896 FRAM memory access optimization. 2005-08-12 21:16:13 +02:00
Stefan Roese
5315dfa9d1 esd PCI405 board updated 
Patch by Matthias Fuchs, 28 Jul 2005
 2005-08-12 16:56:56 +02:00
Stefan Roese
82f4c6ac84 esd WUH405 and DU405 board updated 
Patch by Matthias Fuchs, 27 Jul 2005
 2005-08-12 16:52:47 +02:00
6df6d38d2d Merge with pollux.denx.org:/home/git/u-boot/.git 2005-08-12 15:33:33 +02:00
Wolfgang Denk
dafba16e6f Merge with /home/wd/git/u-boot/master 2005-08-12 00:22:49 +02:00
Stefan Roese
84286386a8 Update AMCC Yosemite to get a consistent setup for all AMCC eval 
boards (baudrate, environment...). Flash driver fixed.
Patch by Stefan Roese, 11 Aug 2005
 2005-08-11 18:03:14 +02:00
Stefan Roese
9e00589bdd Changed AMCC Bubinga (405EP) configuration to support 2nd eth port 
Patch by Stefan Roese, 11 Aug 2005
 2005-08-11 17:58:40 +02:00
Stefan Roese
c57c7980ff Add NAND FLASH support for AMCC Bamboo 440EP eval board 
Patch by Stefan Roese, 11 Aug 2005
 2005-08-11 17:56:56 +02:00
5a27f84855 O2DNT FRAM write delay disabled. 2005-08-11 15:56:59 +02:00
adac376ef2 O2DNT: added hardware flash protect support, macros cleanup. 2005-08-11 10:10:30 +02:00
Wolfgang Denk
8f79e4c2da Add configuration for IFM AEV FIFO board. 
Minor coding style cleanup.
 2005-08-10 15:14:32 +02:00
Wolfgang Denk
eece159cdd Add configuration for IFM SPI eval board 2005-08-10 11:03:05 +02:00
Wolfgang Denk
9d3338d2b9 Fix CompactFlash problem on HMI1001 board 2005-08-10 10:06:25 +02:00
0841565cc7 O2DNT platform specific code. 2005-08-09 14:52:00 +02:00
Stefan Roese
846b0dd2dc Changed CONFIG_440_xx to CONFIG_440xx for a consistent design (405 and linux) 
Patch by Stefan Roese, 08 Aug 2005
 2005-08-08 12:42:22 +02:00
Wolfgang Denk
700a0c648d Add common (with Linux) MTD partition scheme and "mtdparts" command 
Old, obsolete and duplicated code was cleaned up and replace by the
new partitioning method. There are two possible approaches now:
* define a single, static partition
* use mtdparts command line option and dynamic partitioning
Default is static partitioning.
 2005-08-08 01:03:24 +02:00
Wolfgang Denk
452e8e72ad Fix build problems for PM856 Board 2005-08-08 00:47:14 +02:00
Wolfgang Denk
d06a5f7ebf Add support for Altera NIOS DK1C20 board 
Patch by Shlomo Kut, 13 Dec 2004
 2005-08-06 01:56:59 +02:00
Wolfgang Denk
f901a83b70 Add support for ep8248 board 
Patch by Yuli Barcohen, 12 Dec 2004

Minor code cleanup.
 2005-08-06 01:42:58 +02:00
Wolfgang Denk
3836221d5b Fix typo 2005-08-06 01:02:27 +02:00
Wolfgang Denk
d56019c0ee Merge with /home/sr/git/u-boot 2005-08-05 23:55:19 +02:00
Wolfgang Denk
b4f15fdaf7 Merge with /home/wd/git/u-boot/jon_loeliger 2005-08-05 20:03:38 +02:00
Wolfgang Denk
b20d00328c Add support for MicroSys PM856 board 
Patch by Josef Wagner, 03 Aug 2005
 2005-08-05 12:19:30 +02:00
Wolfgang Denk
992b402bbf Minor fixes to PM854 board 
Patch by Josef Wagner, 03 Aug 2005
 2005-08-05 11:47:10 +02:00
Wolfgang Denk
cbf9c11728 Merge with /home/wd/git/u-boot/master 2005-08-05 11:22:28 +02:00
Jon Loeliger
a99a0a98b9 Default 8349ADS CONFIG_PCI off for now. 
Real support for PCI comes in a follow-up patch.
 2005-08-04 17:32:05 -05:00
Wolfgang Denk
452f67407b Adjust configuration of XENIAX board 
(chip select and GPIO required for USB operation)
 2005-08-04 19:45:01 +02:00
Stefan Roese
17f50f22bc Add support for AMCC Bamboo PPC440EP eval board 
Patch by Stefan Roese, 04 Aug 2005
 2005-08-04 17:09:16 +02:00
Wolfgang Denk
460c322f13 (re)enabled scsi commands do_scsi() and do_scsiboot() 
Patch by Denis Peter, 06 Dec 2004
 2005-08-04 01:14:12 +02:00
Wolfgang Denk
dc17fb6dc2 Cleanup build problems (on Fedora Core x86_64 build host) 2005-08-03 22:32:02 +02:00
Jon Loeliger
4b1d95d96a Merge with rsync://git-user@source.denx.net/git/u-boot.git 2005-08-02 13:53:07 -05:00
Wolfgang Denk
095b8a3798 Coding style cleanup 2005-08-02 17:06:17 +02:00
Wolfgang Denk
797638f9ff Merge with /home/sr/git/u-boot 2005-08-02 15:20:47 +02:00
Stefan Roese
4f8657dbfc Remove unnecessary defines from usb_defs.h again. 
Patch by Stefan Roese, 2 Aug 2005
 2005-08-02 15:08:46 +02:00
Wolfgang Denk
7d939f8947 Merge with /home/sr/git/u-boot 2005-08-02 14:43:57 +02:00
Jon Loeliger
de1d0a6995 Fix style issues primarily in 85xx and 83xx boards. 
- C++ comments
    - Trailing white space
    - Indentation not by TAB
    - Excessive amount of empty lines
    - Trailing empty lines
 2005-08-01 13:20:47 -05:00
Stefan Roese
8a316c9b62 Major cleanup for AMCC PPC4xx eval boards. 
Patch by Stefan Roese, 01 Aug 2005
 2005-08-01 16:49:12 +02:00
Stefan Roese
c157d8e219 Add support for AMCC PPC440EP/GR eval boards Yosemite and Yellowstone. 
Patch by Steven Blakeslee, 27 Jul 2005
 2005-08-01 16:41:48 +02:00
Wolfgang Denk
0f18cb6eef Minor fixes for PPChameleon Board: 
* fix alignment of NAND size
* make code do what the comment says
 2005-07-31 00:30:09 +02:00
Lunsheng Wang
b0e3294923 * Patch by Ron Alder, 11 July 2005 
Add Xianghua Xiao and Lunsheng Wang's support for the
    GDA MPC8540 EVAL board.
 2005-07-29 10:20:29 -05:00
Eran Liberty
f046ccd15c * Patch by Eran Liberty 
Add support for the Freescale MPC8349ADS board.
 2005-07-28 10:08:46 -05:00
Jon Loeliger
d9b94f28a4 * Patch by Jon Loeliger, 2005-05-05 
Implemented support for MPC8548CDS board.
  Added DDR II support based on SPD values for MPC85xx boards.
  This roll-up patch also includes bugfies for the previously
  published patches:
    DDRII CPO, pre eTSEC, 8548 LBIU, Andy's TSEC, eTSEC 3&4 I/O
 2005-07-25 14:05:07 -05:00
Jon Loeliger
288693abe1 * Patch by Jon Loeliger, 2005-Feb-10 
Add config option CONFIG_HAS_FEC calling out 8540 FEC features.
 2005-07-25 12:14:54 -05:00
Jon Loeliger
7202d43dde * Patch by Jon Loeliger, Kumar Gala, 2005-02-08 
For MPC85xxCDS:
    Adds Relaxed Timing TRLX bit to FLASH ORx regs to allow
    for faster flash parts.
    Add documentation for BR/OR for FLASH.
 2005-07-25 11:13:26 -05:00
Jon Loeliger
9c4c5ae3e1 * Patch by Jon Loeliger, Kumar Gala 2005-02-08 
- Convert the CPM2 based functionality to use new CONFIG_CPM2
    option rather than a myriad of CONFIG_MPC8560-like variants.
    Applies to MPC85xx and MPC8260 boards, includes stxgp3 and sbc8560.
    Eliminates the CONFIG_MPC8560 option entirely.  Distributes the
    new CONFIG_CPM2 option to each 8260 board.
 2005-07-23 10:37:35 -05:00
Wolfgang Denk
08abe15850 Add CompactFlash support for HMI1001 board. 2005-07-21 15:23:29 +02:00
Wolfgang Denk
9c998aa831 Fix low-level OHCI transfers for ARM920t and MPC5xxx 
A new, Windows compatible init sequence was also backported from Linux 2.6,
but disabled with #undef NEW_INIT_SEQ as it wouldn't change the behaviour
of the memopry sticks we tested. Maybe it's not relevant for mass storage
devices. For recerence, see file common/usb.c, function usb_new_device(),
section #ifdef NEW_INIT_SEQ.
 2005-07-21 11:57:57 +02:00
wdenk
88804d19e2 * Patch by Detlev Zundel, 30 Jun 2005: 
Fix LCD logo for lwmon board which got lost in the merge of 8xx and PXA LCD code
 2005-07-04 00:03:16 +00:00
stroese
3c71f3e8aa * Patch by Stefan Roese, 1 Jul 2005: 
Fix PHY address for CATcenter board (now correct!)
 2005-07-01 15:53:57 +00:00
stroese
bf41886f9d * Patch by Stefan Roese, 30 Jun 2005: 
Fix PHY addresses for PPChameleon and CATcenter boards
  Change MAINTAINER for most esd boards
 2005-06-30 13:06:07 +00:00
wdenk
342717f72a * Fix baudrate calculation problem on MPC5200 systems 
* Add MPC8220 boards to MAKEALL script

* Add EEPROM and RTC support for HMI1001 board

* Patch by Detlev Zundel, 20 Jun 2005:
  Fix initialization of low active GPIO pins on inka4x0 board
 2005-06-27 13:30:03 +00:00
wdenk
024447b186 Enable redundant environment, disable HW flash protection of HMI1001 board 2005-06-20 10:28:38 +00:00
wdenk
a87589da74 * Add support for HMI1001 board 
* Disable "date" and "sntp" commands on TQM866M which has no RTC
 2005-06-10 10:00:19 +00:00
wdenk
ba91e26a19 Patch by Juergen Selent, 17 May 2005: 
Add support for Funkwerk VoVPN gateway module.
 2005-05-30 23:55:42 +00:00
wdenk
2eab48f511 * Extend burst mode RAM test program to take a loop count 
(0 = infinite)

* Use CONFIG_DRIVER_KS8695ETH to enable KS8695 ethernet driver on
  those boards that use it.
 2005-05-23 10:49:50 +00:00
wdenk
16b013e750 Patch by Greg Ungerer, 19 May 2005: 
add support for the OpenGear CM4008 board
 2005-05-19 22:46:33 +00:00
wdenk
3a574cbe72 * Patch by Greg Ungerer, 19 May 2005: 
add support for the KS8695P (ARM 922 based) CPU

* Patch by Steven Scholz, 19 May 2005:
  Add support for CONFIG_SERIAL_TAG on ARM boards
 2005-05-19 22:39:42 +00:00
wdenk
7680c140af Add PCI support for Sorcery board. 
Code cleanup (especially Sorcery / Alaska / Yukon serial driver).
 2005-05-16 15:23:22 +00:00
wdenk
343117bf12 Fix timer handling on MPC85xx systems 2005-05-13 22:49:36 +00:00
wdenk
9dd41a7b0c * Fix debug code in omap5912osk flash driver 
* Add support for MPC8247 based "IDS8247" board.
 2005-05-12 22:48:09 +00:00
wdenk
d44e14b5fc Add support for 2 x TSEC interfaces on the TQM8540 board. 2005-05-10 15:51:35 +00:00
wdenk
412babe304 It's better to handle LZO and LZARI compression mdoes for JFFS2 with 
a single #define.
 2005-05-05 09:51:44 +00:00
wdenk
60fc6cbbb7 Increase CFG_MONITOR_LEN for Rattler board to match actual code size. 2005-05-05 09:13:21 +00:00
wdenk
07cc099941 Major upate of JFFS2 code; now in sync with snapshot of MTD CVS of 
March 13, 2005); new configuration options CONFIG_JFFS2_LZO and
CONFIG_JFFS2_LZARI are added. Both are undefined by default.
 2005-05-05 00:04:14 +00:00
stroese
81b83c9ecc * Patch by Matthias Fuchs, 03 May 2005: 
Added missing variable declaration in cmd_nand.c
  Modified CFG_PCI_PTM1MS in configs/PLU405.h to map 128MB ram
 2005-05-03 06:12:20 +00:00
stroese
dcb2f95a60 * Patch by Stefan Roese, 03 May 2005: 
Update for P3G4
  Fix problems in cmd_universe.c
 2005-05-03 06:06:41 +00:00
wdenk
9f709b6cee Fix INKA4x0: use CS1 as gpio_wkup_6 output 2005-04-22 15:09:09 +00:00
wdenk
a63109281a Fix bug in the SDRAM initialization code for canmb, IceCube and 
PM520 boards.

Fix PHY address for canmb board.
 2005-04-21 21:10:22 +00:00
wdenk
7cc1438d43 get rid of obsolete CFG_AT91C_BRGR_DIVISOR definition 2005-04-20 14:38:59 +00:00
wdenk
b2323ea6f9 Auto-size RAM on canmb board. 
Cleanup.
 2005-04-20 09:28:54 +00:00
stroese
fddae7b811 * Patch by Matthias Fuchs, 18 Apr 2005: 
Make PCI target address spaces on PMC405 and CPCI405 boards
  configurable via environment variables
 2005-04-20 06:52:40 +00:00
wdenk
5e5f9ed254 Add support for canmb board 2005-04-13 23:15:10 +00:00
stroese
04e93ec979 Update for esd apc405 2005-04-13 10:06:07 +00:00
wdenk
b77fad3b25 * Patch by Steven Scholz, 07 Apr 2005: 
Add i2c_reg_write() and i2c_reg_write() for at91rm9200 I2C

* Patch by Steven Scholz, 07 Apr 2005:
  Fix compiler warning in altera.c

* Patch by Ladislav Michl, 06 Apr 2005:
  Fix voiceblue configuration.
 2005-04-07 22:36:40 +00:00
stroese
7ec2550238 * Patch by Stefan Roese, 06 Apr 2005: 
Updates for OCOTEA board:
  - Changed U-Boot size from 512kByte to 256kByte
  - Fixed flash driver to support boot from soldered user flash
  - Added README for switch from PIBS firmware to U-Boot
 2005-04-07 05:35:12 +00:00
stroese
0a7c5391a0 Add PPC440GX Revision C 2005-04-07 05:33:41 +00:00
wdenk
a85f9f21aa Patch by Steven Scholz, 06 Apr 2005: 
- creating SoC subdir for Atmel AT91RM9200 cpu/arm920t/at91rm9200
- moving code out of cpu/at91rm9200 into cpu/arm920t/at91rm9200
 2005-04-06 13:52:31 +00:00
wdenk
20787e23b8 * Patches by Robert Whaley, 29 Nov 2004: 
- update the pxa-regs.h file for PXA27x chips
  - add PXA27x based ADSVIX board
  - add support for MMC on PXA27x processors

* Patch by Andrew E. Mileski, 28 Nov 2004:
  Fix PPC4xx SPD SDRAM detection bug

* Patch by Hiroshi Ito, 26 Nov 2004:
  Fix logic of "test -z" and "test -n" commands
 2005-04-06 00:04:16 +00:00
wdenk
3c2b3d454d * Patch by Ladislav Michl, 05 Apr 2005: 
Add support for VoiceBlue board.

* Patch by Ladislav Michl, 05 Apr 2005:
  Fix netboot_common() prototypes.

* Cleanup.
 2005-04-05 23:32:21 +00:00
wdenk
b304c96871 Patches by Steven Scholz, 05 Apr 2005: 
- Use i.MX watchdog timer for reset_cpu()
- Move reset_cpu() out of cpu/arm920t/start.S into the SoC specific
  subdirectories cpu/arm920t/imx/ and cpu/arm920t/s3c24x0/
  (now in interupts.c)
 2005-04-05 22:30:50 +00:00
wdenk
12b43d515c Add support for MPC8220 based "sorcery" board. 2005-04-05 21:57:18 +00:00
wdenk
f5c5ef4a1f Add support for TQM8560 board 2005-04-05 16:26:47 +00:00
wdenk
3dd7f0f0ca * Add FEC support for TQM8540 board. 
Interfaces are named as follows: "ENET1" - TSEC2, "ENET2" - FEC

* Patch by Martin Krause, 04 Apr 2005:
  Update default configuration for CMC_PU2 board.
 2005-04-04 23:43:44 +00:00
wdenk
8aa1a2d115 Patch by Steven Scholz, 4 Apr 2005: 
- remove all references to CONFIG_INIT_CRITICAL for ARM based boards
- introduce two new configuration options instead:
  CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT
 2005-04-04 12:44:11 +00:00
wdenk
101e8dfa2a Fix timer code for ARM systems: make sure that udelay() does not 
reset timers so it's save to use udelay() in timeout code.
 2005-04-04 12:08:28 +00:00
wdenk
901787d6e8 Patch by Jerry Van Baren, 08 Nov 2004: 
- Add low-boot option for MPC8260ADS board (if lowboot is selected,
  the jumper for the HRCW source should select flash. If lowboot is
  not selected, the jumper for the HRCW source should select the
  BCSR.
- change default load base address to 0x00400000
 2005-04-03 23:22:21 +00:00
wdenk
8b0bfc6804 * Patch by Yuli Barcohen, 08 Nov 2004: 
Add support for Analogue & Micro Rattler boards.
  Tested on Rattler8248.

* Patch by Andre Renaud, 08 Nov 2004:
  Fix watchdog support in common/lcd.c

* Patch by Marc Leeman, 05 Nov 2003:
  Enable all 4 PCMBRW buffers for the MPC8245 processor since the CPU
  bug only affects the XPC8245 processors
 2005-04-03 23:11:38 +00:00
wdenk
384cc68744 Patches by Josef Wagner, 29 Oct 2004: 
- Add support for MicroSys CPU87 board
- Add support for MicroSys PM854 board
 2005-04-03 22:35:21 +00:00
wdenk
6315349202 Patch by David Adair, 27 Oct 2004: 
Add missing 440GX SDRAM Controller reset
 2005-04-03 20:55:38 +00:00
wdenk
3ec924a3cb Patch by Steven Scholz, 25 Oct 2004: 
Declare reset_cpu() in include/common.h instead locally
 2005-04-03 17:23:39 +00:00
wdenk
756f586a73 * Patch by Yusdi Santoso, 22 Oct 2004: 
- Add support for HIDDEN_DRAGON board
  - fix endianess problem in driver/rtl1839.c

* Patch by Allen Curtis, 21 Oct 2004:
  support multiple serial ports
 2005-04-03 15:51:42 +00:00
wdenk
86c9888207 Patch by Steven Scholz, 03 Apr 2005: 
- create SoC specific directories include/asm-arm/arch-imx and
  include/asm-arm/arch-s3c24x0
 2005-04-03 14:26:46 +00:00
wdenk
59acc296d9 Minor cleanup 2005-04-03 14:18:51 +00:00
wdenk
400558b561 Prepare for SoC rework of ARM code: 
- rename CONFIG_BOOTBINFUNC into  CONFIG_INIT_CRITICAL
- rename memsetup into lowlevel_init (function name and source files)
 2005-04-02 23:52:25 +00:00
wdenk
414eec35e3 Fix problems with SNTP support; 
enable SNTP support in some boards.
 2005-04-02 22:37:54 +00:00
wdenk
be6b6e4e2d Patch by Martin Krause, 01 Apr 2005: 
Add automatic HW detection for CMC_PU2 and CMC_BASIC
 2005-04-01 15:18:44 +00:00
wdenk
e6ba3c92ce Patch by Martin Krause, 01 Apr 2005: 
Fix flash erase timeout on CMC_PU2
 2005-04-01 09:29:14 +00:00
wdenk
ea287debe1 * Patch by Masami Komiya, 30 Mar 2005: 
add SNTP support and expand time server and time offset fields of
  DHCP support. See doc/README.SNTP

* Patch by Steven Scholz, 13 Dec 2004:
  Fix bug in at91rm920 ethernet driver
 2005-04-01 00:25:43 +00:00
wdenk
ef2807c667 Patch by Steven Scholz, 13 Dec 2004: 
Remove duplicated code by merging memsetup.S files for
at91rm9200 boards into one cpu/at91rm9200/lowlevel.S
 2005-03-31 23:44:33 +00:00
wdenk
83e40ba75d * Patch by Detlev Zundel, 31 Mar 2005: 
Cleanup duplicate definition of overwrite_console()

* Update TQM5200 configuration;
  prepare for Rev. 200 starter kit boards
 2005-03-31 18:42:15 +00:00
wdenk
0c1c117cf1 * Patch by Scott McNutt, 21 Oct 2004: 
Add support for Nios-II EPCS Controller core.

* Patch by Scott McNutt, 20 Oct 2004:
  Nios-II cleanups:
  - Add sysid command (Nios-II only).
  - Locate default exception trampoline at proper offset.
  - Implement I/O routines (readb, writeb, etc)
  - Implement do_bootm_linux
 2005-03-30 23:28:18 +00:00
wdenk
8f0b7cbe80 Patches by Martin Krause, 22 Mar 2005: 
- use TQM5200_auto as MAKEALL target for TQM5200 systems
- add support for SM501 graphics controller
- add support for graphic console on TQM5200
- add support for TQM5200 Rev 200
- cleanup, fix typo in include/configs/TQM5200.h
 2005-03-27 23:41:39 +00:00
wdenk
e632515387 * Fix RTC configuration for PPChameleon board 
* Cleanup, fix typo in include/configs/TQM5200.h
 2005-03-17 16:43:10 +00:00
wdenk
89c02e2c57 Adapt for U-Boot image size (new features enabled) on TQM5200 2005-03-16 16:32:26 +00:00
wdenk
6c9e789e9e Update code for TQM8540 board (and 85xx in general): 
- Change the name of the Ethernet driver: MOTO ENET -> ENET
- Reformat boot messages
- Enable redundant environment
- Replace the -O2 optimization flag with -mno-string
 2005-03-15 22:56:53 +00:00
wdenk
911d08f6ae Tune TQM8540 default configuration. 2005-03-15 00:26:31 +00:00
wdenk
9d46ea4a55 * Patch by David Brownell, 10 Mar 2005: 
Restore copyright statements in OHCI drivers.

* Add support for TQM8540 board
 2005-03-14 23:56:42 +00:00
wdenk
c3fafecff1 Patch by Detlev Zundel, 14 Mar 2005: 
NC650: changed NAND flash addressing to using UPMB
 2005-03-14 23:01:03 +00:00
wdenk
a0bdf49e39 INKA4x0: Allow initialization of LCD backlight dimming from 
"brightness" environment variable.
 2005-03-14 13:14:58 +00:00
wdenk
f4733a0764 Add port initialization for digital I/O on INKA4x0 2005-03-06 01:21:30 +00:00
wdenk
b05dcb58fe * Fix get_partition_info() parameter error in all other calls 
(common/cmd_ide.c, common/cmd_reiser.c, common/cmd_scsi.c).

* Enable USB and IDE support for INKA4x0 board

* Patch by Andrew Dyer, 28 February 2005:
  fix ext2load passing an incorrect pointer to get_partition_info()
  resulting in load failure for devices other than 0
 2005-03-04 11:27:31 +00:00
stroese
47b1e3d77f Update for esd boards dp405 and hub405 2005-03-01 17:26:39 +00:00
wdenk
e58cf2a0cf Add support for SRAM and 2 x Quad UARTs on INKA4x0 board 2005-02-27 23:46:58 +00:00
wdenk
1968e615d4 Cleanup USB and partition defines 2005-02-24 23:23:29 +00:00
wdenk
151ab83a93 * Add support for ext2 filesystems and image timestamps to TQM5200 board 
* Add reset code for Coral-P on INKA4x0 board

* Patch by Martin Krause, 28 Jun 2004:
  Update for TRAB board.

* Fix some missing "volatile"s in MPC5xxx FEC driver
 2005-02-24 22:44:16 +00:00
wdenk
1a344f298d * Removed '--no-warn-mismatch' option from Makefile. This option 
makes 'ld' to overlook binary objects compatibility.

* Moved $(PLATFORM_LIBS) from the library group (--start-group ...
  --end-group) outside of the group. This will make 'ld' to do
  _multiple_ search in the library group when resolving symbol
  references and do only a _single_ seach in libgcc.a after the group
  search.

* Fix stability problems on CPC45 board again.

* Make image detection for diskboot / usbboot / scsiboot more robust
  (also check header checksum)
 2005-02-03 23:00:49 +00:00
wdenk
436be29cad * Update CPC45 board configuration. 
* Add USB and PCI support for INKA4x0 board
 2005-01-31 22:09:11 +00:00
wdenk
cd172b7108 Fix IDE stability problems on CPC45 board. 2005-01-22 18:26:04 +00:00
wdenk
c3d2b4b48a Code cleanup. 2005-01-22 18:13:04 +00:00
wdenk
5a95f6fbd2 * Patch by Robin Getz, 13 Oct 2004: 
Add standalone application to change SMC91C111 MAC addresses,
  see examples/README.smc91111_eeprom

* Patch by Xiaogeng (Shawn) Jin, 12 Oct 2004:
  Fix Flash support for ARM Integrator CP.
 2005-01-12 00:38:03 +00:00
wdenk
289f932c5f * Some Cleanup. 
* Patch by Richard Woodruff, 10 Jan 2005:
  Update support for OMAP2420 (ARM11) and H4 board:
  o clean up and add new types to H4 memory probe code.
  o fix to work with internal boot.
  o added PRCM config III operation.
  o fix marginal flash timings.
  o add revison ATAG usage.
  o enable voltage scaling at power chip.
  o fix compile error for i2c.

* Fix network problem (error when receiving multiple ARP packets)
 2005-01-12 00:15:14 +00:00
wdenk
082acfd484 Coding Style cleanup 2005-01-10 00:01:04 +00:00
wdenk
652a10c096 * Patch by Daniel Poirot, 10 Oct 2004: 
Add support for Wind River sbc405 board

* Patch by Rainer Brestan, 12 Oct 2004:
  Make examples/Makefile more robust
 2005-01-09 23:48:14 +00:00
wdenk
6225c5db6c * Patch by Sam Song, 11 October 2004: 
- Add RESET/PREBOOT/AUTOBOOT support for RPXlite_DW board
  - Adjust CPU:BUS frequency ratio 1:1 when core frequency
    less than 50MHz

* Patch by Sam Song, 10 Oct 2004:
  Fix a parameter error in run_command() in main.c
 2005-01-09 23:33:49 +00:00
wdenk
8ed9604613 * Patches by Richard Woodruff, 01 Oct 2004: 
add support for the TI OMAP2420 processor and its H4 reference
  board

* Patch by Christian Pellegrin, 24 Sep 2004:
  Added support for NE2000 compatible (DP8390, DP83902) NICs.
 2005-01-09 23:16:25 +00:00
wdenk
ff36fd8591 * Patch by Leif Lindholm, 23 Sep 2004: 
add support for the AMD db1550 board

* Patch by Travis Sawyer, 15 Sep 2004:
  Add CONFIG_SERIAL_MULTI support for ppc4xx,
  update README.serial_multi
 2005-01-09 22:28:56 +00:00
wdenk
6310eb9da7 Patches by David Snowdon, 07 Sep 2004: 
- add u-boot.hex target in the top level Makefile
- add support for the UNSW/NICTA PLEB 2 board (pleb2)
- use -mtune=xscale and -march=armv5 options for PXA
 2005-01-09 21:28:15 +00:00
wdenk
a562e1bd9d Patch by Florian Schlote, 08 Sep 2004: 
Add support for SenTec-COBRA5272-board (Coldfire).
 2005-01-09 18:21:42 +00:00
wdenk
9dd611b8c1 * Patch by Kurt Stremerch, 03 Sep 2004: 
Add Xilinx Spartan2E family FPGA support

* Patch by Jeff Angielski, 02 Sep 2004:
  Add Added support for H2 revision of the EP8260 board.
  Fixed formatting for some of the EP8260 related source files.
 2005-01-09 17:19:34 +00:00
wdenk
a1191902ca * Patch by Jon Loeliger, 02 Sep 2004: 
Reset monitor size back to 256 so environment can be written
  to flash on MPC85xx ADS and CDS releases.

* Patch by Paolo Broggini, 02 Sep 2004:
  Make BSS clearing on ARM systems more robust

* Patch by Yue Hu and Joe, 01 Sep 2004:
  - add PCI support for ixp425;
  - add EEPRO100 suppor tfor ixdp425 board.

* Fix problem with protected sector detection in driver/cfi_flash.c
 2005-01-09 17:12:27 +00:00
wdenk
e2ffd59b4d * Code cleanup, mostly for GCC-3.3.x 
* Cleanup confusing use of CONFIG_ETH*ADDR - ust his only to
  pre-define a MAC address; use CONFIG_HAS_ETH* to enable support for
  additional ethernet addresses.

* Cleanup drivers/i82365.c - avoid duplication of code

* Fix bogus "cannot span across banks" flash error message

* Add support for CompactFlash for the CPC45 Board.
 2004-12-31 09:32:47 +00:00
wdenk
08f272787a * Fix problems with CMC_PU2 flash driver. 
* Adjust INKA 4x0 default settings
 2004-12-19 21:39:27 +00:00
wdenk
bff96b0e6b Renamed UC100 => uc100 2004-12-19 10:09:07 +00:00
wdenk
ec0aee7b68 Cleanup: avoid trigraph warning in fs/ext2/ext2fs.c; rename UC100 -> uc100 2004-12-19 09:58:11 +00:00
wdenk
f7d1572bf5 Add support for UC100 board 2004-12-18 22:35:43 +00:00
wdenk
efe2a4d5cf Code cleanup. 2004-12-16 21:44:03 +00:00
stroese
a20b27a36b esd config files updated 2004-12-16 18:05:42 +00:00
stroese
44acc8d334 new 405ep defines added 2004-12-16 18:03:44 +00:00
stroese
4d535b51e1 new SST and EXCEL devices add 2004-12-16 18:01:48 +00:00
stroese
3d936fd992 - ext2fs support added 
- Tundra universe support added
 2004-12-16 17:59:53 +00:00
stroese
cd42deebd2 Coldfire MCF5249 support added 2004-12-16 17:56:09 +00:00
stroese
256e4be814 Tundra universe support added 2004-12-16 17:33:38 +00:00
stroese
bcd0be5cf1 ext2fs support added 2004-12-16 17:33:10 +00:00
wdenk
138ff60c1e Add support for INKA4X0 board 2004-12-16 15:52:40 +00:00
wdenk
45ea3fca4a Cleanup for CMC_PU2 board 2004-12-14 23:28:24 +00:00
wdenk
96085e347d Fix problem introduced by previous patch. 2004-12-13 09:49:01 +00:00
wdenk
7e6bf358d8 Patch by Martin Krause, 27 Oct 2004: 
- add support for "STK52xx" board (including PS/2 multiplexer)
- add hardware detection for TQM5200
 2004-12-12 22:06:17 +00:00
wdenk
ed54e62125 * Fix udelay() on AT91RM9200 for delays < 1 ms. 
* Enable long help on CMC PU2 board;
  fix reset issue;
  increase CPU speed from 179 to 207 MHz.
 2004-11-24 23:35:19 +00:00
wdenk
9d5028c2f7 * Update for AT91RM9200DK and CMC_PU2 boards: 
- Enable booting directly from flash
  - fix CMC_PU2 flash driver

* Fix mkimage usage message
 2004-11-21 00:06:33 +00:00
wdenk
cacfab588a Map SRAM on NC650 board 2004-11-17 20:44:20 +00:00
wdenk
1f6d4258c2 Work around for Ethernet problems on Xaeniax board 2004-11-02 13:00:33 +00:00
wdenk
983fda8391 Patch by TsiChung Liew, 23 Sep 2004: 
- add support for MPC8220 CPU
- Add support for Alaska and Yukon boards
 2004-10-28 00:09:35 +00:00
wdenk
e3c9b9f928 * Fix configuration for ERIC board (needs more room) 
* Adjust MIPS compiler options at run-time depending on tools version
  ("-march=4kc -mtune=4kc -Wa,-mips_allow_branch_to_undefined" for new,
  "-mcpu=4kc" for old tools)
 2004-10-24 23:54:40 +00:00
wdenk
14699a22cf Add passing of the command line and memory size information to the 
kernel on xaeniax board.
 2004-10-19 22:17:51 +00:00
wdenk
e86e5a0748 Code cleanup for GCC-3.3.x compilers 2004-10-17 21:12:06 +00:00
wdenk
8b74bf31fe Cleanup 2004-10-11 23:10:30 +00:00
wdenk
4cfaf55e5c * Enable NAND flash support for NC650 board. 
* Patch by Thomas Lange 07 Oct 2004:
  Updated README for DBAu1x00 boards to match current status
 2004-10-11 23:03:10 +00:00
wdenk
d407bf52b5 * Patch by Philippe Robin, 28 Sept 2004: 
Fix Flash support for Versatile.

* Patch by Roger Blofeld, 16 Sep 2004:
  Fix timeout for DHCP command retry
 2004-10-11 22:51:13 +00:00
wdenk
9455b7f39c Fix CFG_HZ problems on AT91RM9200 systems 
[Remember: CFG_HZ should be 1000 on ALL systems!]
 2004-10-11 22:25:49 +00:00
wdenk
e1599e83d6 * Patch by Gridish Shlomi, 30 Aug 2004: 
- Add support to revA version of PQ27 and PQ27E.
  - Reverted MPC8260ADS baudrate back to original 115200

* Patch by Hojin, 17 Sep 2004:
  Fix typo in cfi_flash.c

* Patch by Mark Jonas, 09 September 2004:
  mtest's data line test (with CFG_ALT_MEMTEST set) returned a wrong
  error message

* Patch by Mark Jonas, 31 August 2004:
  Added option CFG_XLB_PIPELINING to enable XLB pipelining. This
  improves FTP performance for MPC5200 systems. Enabled for IceCube
  by default.
 2004-10-10 23:27:33 +00:00
wdenk
c15f3120ec * Patch by Michael Bendzick, 30 Aug 2004: 
- Improve platform.S code for omap1510inn that detects whether code
    is running from SDRAM or not. Patch allows SDRAM to be configured
    if code is running out of SRAM at 0x20000000.

* Patch by Frederick Klatt, 30 Aug 2004:
  Add support for the Wind River SBC8540/SBC8560 boards
 2004-10-10 22:44:24 +00:00
wdenk
656658dd15 * Configure SX1 board to use drivers/cfi_flash.c 
* Patches by Michael Bendzick, 30 Aug 2004:
  - Configure omap1510inn board to use drivers/cfi_flash.c
  - Make drivers/cfi_flash.c protect environment and redundant
    environment.

* Patch by Steven Scholz, 23 Jun 2004:
  - Add script (tools/img2brec.sh) to programm U-Boot into
    (Synch)Flash using the Bootstrap Mode of the MC9328MX1/L
 2004-10-10 22:16:06 +00:00
wdenk
5c952cf024 Patches by Scott McNutt, 24 Aug 2004: 
- Add support for Altera Nios-II processors.
- Add support for Psyent PCI-5441 board.
- Add support for Psyent PK1C20 board.
 2004-10-10 21:27:30 +00:00
wdenk
03f5c55021 Patches by Jon Loeliger, 24 Aug 2004: 
- Add support for the MPC8541 and MPC8555 CDS boards
- Cleanup eth?addr handling: make dependent on CONFIG_ETH?ADDR
 2004-10-10 21:21:55 +00:00
wdenk
cf33678e51 * Patch by Jon Loeliger, 24 Aug 2004: 
- Fix PCI window on MPC85xx; remove unneeded PCI initialization
    from board_early_init_f()
  - Provide SW workaround for PCI initialization on 85xx CDS
  - Convert MPC85xxADS to use common CFI flash driver

* Cleanup: avoid compiler warnings

* Add CMC PU2 board to MAKEALL script
 2004-10-10 20:23:57 +00:00
wdenk
08b6aa6154 Patches by George G. Davis, 24 Aug 2004: 
- Enable ramdisk/initrd tagged param support for omap1610h2_config
- Remove static network setup defaults from mx1ads_config
 2004-10-10 18:49:14 +00:00
wdenk
731215ebde Patch by George G. Davis, 24 Aug 2004: 
- update ARM boards to use constants from mach-types.h
 2004-10-10 18:41:04 +00:00
wdenk
b65085130a Code Cleanup 
Patch by Gary Jennejohn, 04 Oct 2004:
- fix I2C on at91rm9200
- add support for Ricoh RS5C372A RTC
 2004-10-10 18:03:33 +00:00
wdenk
2cbe571a56 * Patch by Gary Jennejohn, 01 Oct 2004: 
- add support for CMC PU2 board
  - add support for I2C on at91rm9200

* Patch by Gary Jennejohn, 28 Sep 2004:
  fix baudrate handling on at91rm9200
 2004-10-10 17:05:18 +00:00
wdenk
659883c298 Patch by Yuli Barcohen, 22 Aug 2004: 
- remove ZPC.1900 board-specific flash driver;
  switch the port to generic CFI driver;
- port clean-up
 2004-10-09 23:33:42 +00:00
wdenk
8655b6f860 * Clean up tools/bmp_logo.c to not add trailing white space 
* Patch by Hinko Kocevar, 21 Aug 2004:
  - Group common framebuffer functions in common/lcd.c
  - Group common framebuffer macros and #defines in include/lcd.h
  - Provide calc_fbsize() for video ATAG
 2004-10-09 23:25:58 +00:00
wdenk
30d56fae23 Patch by Sam Song, 21 August 2004: 
- Fix a typo in README
- Align "(RO)" output for "flinfo" after "protect on"
- Add RESET support for RPXlite_DW board; adjust CPU:BUS frequency
  ratio 1:1 when core frequency less than 50MHz
 2004-10-09 22:44:59 +00:00
wdenk
63cfcbb4e2 Patches by himba, 21 Aug 2004: 
- fix some "use of label at end of compound statement" warnings
- Define type of LCD panel on lubbock board if CONFIG_LCD is used
 2004-10-09 22:32:26 +00:00
wdenk
3e01d75ff2 Patch by Andreas Engel, 16 Aug 2004: 
parameter type cleanup for NetSetTimeout()
 2004-10-09 21:56:21 +00:00
wdenk
a5bbcc3c53 * Patches by Sean Chang, 09 Aug 2004: 
- Added support for both 8 and 16 bit mode access to System ACE CF
    through MPU.
  - Fixed missing System ACE CF device during get FAT partition info
    in fat_register_device function.
  - Enabled System ACE CF support on ML300.

* Patch by Sean Chang, 09 Aug 2004:
  Synch defines for saveenv and do_saveenv functions so they get
  compiled under the same statement.
 2004-09-29 22:55:14 +00:00
wdenk
a06752e36b * Patch by Sean Chang, 9 Aug 2004: 
- Added I2C support for ML300.
  - Added support for ML300 to read out its environment information
    stored on the EEPROM.
  - Added support to use board specific parameters as part of
    U-Boot's environment information.
  - Updated MLD files to support configuration for new features
    above.

* Patches by Travis Sawyer, 5 Aug 2004:
  - Remove incorrect bridge settings for eth group 6
  - Add call to setup bridge in ppc_440x_eth_initialize
  - Fix ppc_440x_eth_init to reset the phy only if its the
    first time through, otherwise, just check the phy for the
    autonegotiated speed/duplex.  This allows the use of netconsole
  - only print the speed/duplex the first time the phy is reset.
 2004-09-29 22:43:59 +00:00
wdenk
da93ed8147 * Patch by Shlomo Kut, 29 Mar 2004: 
Add support for MKS Instruments "Quantum" board

* Fix build problem with Cogent boards;
  avoid using <asm/byteorder.h> when using the host compiler
 2004-09-29 11:02:56 +00:00
wdenk
64f70bede3 Fix problems with CDROM drive as slave device on Lite5200 IDE bus. 2004-09-28 20:34:50 +00:00
wdenk
cce625e557 * Patch by Stephen Williams, 15 July 2004 
Set the PCI class code for JSE board as part of PCI interface setup

* Patch by Michael Bendzick, 15 Jul 2004:
  Fix problem with writes with odd sizes in drivers/cfi_flash.c when
  CFG_FLASH_USE_BUFFER_WRITE is set
 2004-09-28 19:00:19 +00:00