Commit graph

15700 commits

Author SHA1 Message Date
Lukas Auer
3dea63c844 riscv: add support for multi-hart systems
On RISC-V, all harts boot independently. To be able to run on a
multi-hart system, U-Boot must be extended with the functionality to
manage all harts in the system. All harts entering U-Boot are registered
in the available_harts mask stored in global data. A hart lottery system
as used in the Linux kernel selects the hart U-Boot runs on. All other
harts are halted. U-Boot can delegate functions to them using
smp_call_function().

Every hart has a valid pointer to the global data structure and a 8KiB
stack by default. The stack size is set with CONFIG_STACK_SIZE_SHIFT.

Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-04-08 09:44:26 +08:00
Lukas Auer
1446b26f76 riscv: save hart ID in register tp instead of s0
The hart ID passed by the previous boot stage is currently stored in
register s0. If we divert the control flow inside a function, which is
required as part of multi-hart support, the function epilog may not be
called, clobbering register s0. Save the hart ID in the unallocatable
register tp instead to protect the hart ID.

Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Rick Chen <rick@andestech.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
2019-04-08 09:44:26 +08:00
Lukas Auer
2503ccc55f riscv: delay initialization of caches and debug UART
Move the initialization of the caches and the debug UART until after
board_init_f_init_reserve. This is in preparation for SMP support, where
code prior to this point will be executed by all harts. This ensures
that initialization will only be performed once on the main hart running
U-Boot.

Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-04-08 09:44:26 +08:00
Lukas Auer
f152febb2a riscv: implement IPI platform functions using SBI
The supervisor binary interface (SBI) provides the necessary functions
to implement the platform IPI functions riscv_send_ipi() and
riscv_clear_ipi(). Use it to implement them.

This adds support for inter-processor interrupts (IPIs) on RISC-V CPUs
running in supervisor mode. Support for machine mode is already
available for CPUs that include the SiFive CLINT.

Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-04-08 09:44:26 +08:00
Lukas Auer
34a0626fc3 riscv: import the supervisor binary interface header file
Import the supervisor binary interface (SBI) header file from Linux
(arch/riscv/include/asm/sbi.h). The last change to it was in commit
6d60b6ee0c97 ("RISC-V: Device, timer, IRQs, and the SBI").

Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
2019-04-08 09:44:25 +08:00
Lukas Auer
fa33f08fd6 riscv: add infrastructure for calling functions on other harts
Harts on RISC-V boot independently, U-Boot is responsible for managing
them. Functions are called on other harts with smp_call_function(),
which sends inter-processor interrupts (IPIs) to all other available
harts. Available harts are those marked as available in the device tree
and present in the available_harts mask stored in global data. The
available_harts mask is used to register all harts that have entered
U-Boot. Functions are specified with their address and two function
arguments (argument 2 and 3). The first function argument is always the
hart ID of the hart calling the function. On the other harts, the IPI
interrupt handler handle_ipi() must be called on software interrupts to
handle the request and call the specified function.

Functions are stored in the ipi_data data structure. Every hart has its
own data structure in global data. While this is not required at the
moment (all harts are expected to boot Linux), this does allow future
expansion, where other harts may be used for monitoring or other tasks.

Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-04-08 09:44:25 +08:00
Tom Rini
0e62d5b2ab Fixes for 2019.04
- fix bashism for MX8
 	- fix ethernet for MX53
 	- fix docs for i.MX8
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAlynLM8PHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et38/QL/Rc3p1pF6Dr9zKzxA0rcMoBo9MzzTrUP6XrN
 8syDBJNo2u93Msv78xHTQMCcfxRR3bkTYiWPEzWphC4Qk2IZIe2sETxu2BqsmWRI
 qzK5+L7oU3qJYqY8mZTUKPhmNxDu7E6yGXI1cWboWSR+/DMTxrUHZU5gjQyaQ/WN
 Diko1+lyaygZyPv0FzBdx7Vv+agQusGXGu4XbRkOXhrE6ytMv2ZjCzUtMYRIUg8H
 057DtJfwgU+zfimUoeuiltAwywh9UGxmlR4kb6rF5VZWX0Xn/XoVbMR6qRQXaFIz
 PzlNu3FEpOmvBQ5W5xySHS0CzbeTisIopJehZbkCc+XaEr80GplN995rGWGIN5av
 nlYS7rWHyIcVxoQNT61JTfVC1blFu6+tiokINWFI8as0fMrEAU4okzT4oBaGxdun
 CVcZDo9ytxKWLqtpD0MIQW4r4kJ27yWe3s4ot+v/+jb+XwkatX2J6oaiKviFFhuc
 BwniIb9lsi3ESIOaQXjpJ+qAw9gWYA==
 =//jr
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20190405' of git://git.denx.de/u-boot-imx

Fixes for 2019.04

	- fix bashism for MX8
	- fix ethernet for MX53
	- fix docs for i.MX8
2019-04-05 09:09:56 -04:00
Lukasz Majewski
da60b4301c DTS: Fix ETH PHY reset on HSC|DDC boards (imx53)
After the commit: "eth: dm: fec: Add gpio phy reset binding"
SHA1: efd0b79106

The FEC ETH driver switched to PHY GPIO reset performed with data defined
in DTS.
For the HSC|DDC boards the GPIO reset signal is active low and hence the
wrong DTS description must be changed (otherwise the reset for ETH is not
properly setup).

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-02 13:44:18 +02:00
Tom Rini
da06f9a185 Merge branch 'master' of git://git.denx.de/u-boot-sh
Minor fixes for the Alt board and PHY use on Gen2.
2019-04-01 23:30:00 -04:00
Marek Vasut
e3b086cf04 ARM: dts: rmobile: Activate I2C7 on Alt
Activate I2C7 on Alt to allow access to the PMIC.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-03-30 08:28:25 +01:00
Philipp Tomsich
a2893baa47 Revert "rockchip: Drop call to rockchip_dnl_mode_check() for now"
Due to a final resolution not coming up in time for 2019.04 and
following the consensus on the discussion, we'll keep this around
for 2019.04 after all.

This reverts commit 0d968ceb1f.
2019-03-29 09:21:13 +01:00
Tom Rini
d32519ac8a Merge branch 'master' of git://git.denx.de/u-boot-sh
- Various fixes for bugs found by u-boot test.py
2019-03-26 23:19:11 -04:00
Patrick Delaunay
abe66b1b5d Convert CONFIG_ENV_SPI_* to Kconfig
This converts the following to Kconfig:
  CONFIG_ENV_SPI_BUS
  CONFIG_ENV_SPI_CS
  CONFIG_ENV_SPI_MAX_HZ
  CONFIG_ENV_SPI_MODE

Most of time these value are not needed, CONFIG_SF_DEFAULT
with same value is used, so I introduced CONFIG_USE_ENV_SPI_*
to force the associated value for the environment.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-03-25 17:36:59 -04:00
Patrick Delaunay
ac31d0d873 exynos: replace CONFIG_ENV_SPI_BASE by CONFIG_SYS_SPI_BASE
Replace CONFIG_ENV_SPI_BASE by the better CONFIG_SYS_SPI_BASE
(it is not the location for environment but the location for U-Boot)
and, as it is the only platform with use this define, remove
it from whitelist.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-03-25 17:35:52 -04:00
Marek Vasut
c49d0ac38a ARM: dts: rmobile: Increase off-on delay on the SD Vcc regulator
An ADATA 16GB Industrial MLC card has so much capacitance on the Vcc
pin that the usual toggling of regulator to power the card off and on
is insufficient. When the card is calibrated into UHS SDR104 mode, it
will remain in that mode across the power cycle and subsequent attempt
to communicate with the card will fail.

The test with this card is to insert it into an SDHI slot and perform
"mmc dev 0 ; mmc dev 0", where the second "mmc dev 0" will fail.

Fix this problem by increasing the off-on delay from 0 to 20 mS.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-03-25 20:26:53 +01:00
Masahiro Yamada
344db3f330 mips: add missing dtb-y to arch/mips/dts/Makefile
Since commit 27cb7300ff ("Ensure device tree DTS is compiled"),
build succeeds irrespective of the correctness of Makefile.

In fact, you can compile any defconfig without adding any entry in
arch/*/dts/Makefile.

I am going to revert that commit, so device tree must be explicitly
listed in Makefile.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-03-22 12:15:12 -04:00
Masahiro Yamada
680207a1c5 powerpc: fix arch/powerpc/dts/Makefile
Since commit 27cb7300ff ("Ensure device tree DTS is compiled"),
build succeeds irrespective of the correctness of Makefile.

I am going to revert that commit, so wrong code must be fixed.

CONFIG_MCR3000 is not defined anywhere. CONFIG_TARGET_MCR3000 is the
correct one.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-22 12:15:10 -04:00
Masahiro Yamada
89c2b5c020 ARM: fix arch/arm/dts/Makefile
Since commit 27cb7300ff ("Ensure device tree DTS is compiled"),
build succeeds irrespective of the correctness of Makefile.

In fact, you can compile any defconfig without adding any entry in
arch/*/dts/Makefile.

As a result, a lot of wrong code have been merged unnoticed.

I am going to revert that commit, and lots of hidden issues have
come to light:

[1] Typos

  armada-3720-uDPU.dts, sun8i-a83t-tbs-a711.dts

  use the extension ".dts" instead of ".dtb"

[2] DTB is associated to undefined CONFIG option

  For example, mx6sllevk_defconfig defines CONFIG_MX6SLL, but
  associates its device tree to CONFIG_MX6SL, which is undefined.

[3] Lots of entries are missing

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Chris Packham <judge.packham@gmail.com>
[trini: add imx6ul pico dtbs]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-03-22 12:15:09 -04:00
Alexander Graf
ef331e3685 armv8: Disable exception vectors in SPL by default
Commit 1416e2d225 ("armv8: make SPL exception vectors optional") had a
typo in it which effectively disabled exception handling in SPL code always.

Since nobody complained, I guess we may as well disable exception handling
in SPL always by default.

So fix the bug to make the config option effective, but disable exception
handling in SPL by default. This gets us to the same functionality as before
by default, but with much less code included in the binary.

Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
2019-03-22 12:15:03 -04:00
Keerthy
6dad56d733 arm: lib: bootm: Push the Starting kernel print to the end
Push the Starting kernel print to the end just before the
dm_remove_devices call.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-03-22 08:35:50 -04:00
Tom Rini
a00d15757d Merge git://git.denx.de/u-boot-marvell
- Enable network interface on clearfog_gt_8k (Baruch)
- Fix dreamplug boot by adding an spi0 alias to the DT (Chris)
- Fix / enhance Marvell ddr3 setup / parameters (Chris)
- Change CONFIG_SYS_MALLOC_F_LEN to 0x2000 on db-88f6820-amc (Chris)
- Enable SPL_FLASH_BAR on db-88f6820-amc (Chris)
- Use correct pcie controller name in Armada-38x dts files (Chris)
- Disable d-cache on Kirkwood platforms as currently needed (Chris)
- Add a more descriptive comment to pci_mvebu.c (Stefan)
- Update Marvell maintainers entry (Stefan)
2019-03-19 19:58:48 -04:00
Tom Rini
810ae23fbc Merge branch 'master' of git://git.denx.de/u-boot-socfpga 2019-03-19 07:13:23 -04:00
Chris Packham
599f7aa541 ARM: kirkwood: disable dcache for Kirkwood boards
Prior to commit 93b283d49f ("ARM: CPU: arm926ejs: Consolidate cache
routines to common file") the kirkwood boards didn't have and dcache
support. The network and usb drivers rely on this. Set
CONFIG_SYS_DCACHE_OFF in the Kirkwood specific config.h.

Reported-by: Leigh Brown <leigh@solinno.co.uk>
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2019-03-19 09:22:05 +01:00
Chris Packham
825dd50f59 ARM: mvebu: use correct name for pcie controller
When armada-385.dtsi was sync'd from Linux the name of the node
describing the pcie controller was changed from pcie-controller to pcie.
Some of the boards that include armada-385.dtsi were missed in the
update retaining the old name. This updates the affected boards.

Reported-by: Влад Мао <vlaomao@gmail.com>
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2019-03-19 09:22:05 +01:00
Chris Packham
5860532264 ARM: kirkwood: add spi0 alias for dreamplug
The conversion to DM_SPI managed to break accessing the environment on
dreamplug. This is because the environment code relies on being to able
to select the SPI device based on the sequence number. Add an alias so
that the spi0 bus gets sequence number 0.

Reported-by: Leigh Brown <leigh@solinno.co.uk>
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Tested-by: Leigh Brown <leigh@solinno.co.uk>
Signed-off-by: Stefan Roese <sr@denx.de>
2019-03-19 09:22:05 +01:00
Ley Foon Tan
ff0005b56a ARM: dts: socfpga: Add missing altr,sysmgr-syscon for EMAC
Syscon register is required in dts to select correct
PHY interface.

Fix error below:

Net:   Failed to get syscon: -2

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-03-16 13:30:03 +01:00
Tom Rini
8303467e80 Merge git://git.denx.de/u-boot-fsl-qoriq
- DPAA2 fixes and DDR errata workaround for LS1021A
2019-03-15 11:58:17 -04:00
Alison Wang
158097052a armv7: ls102xa: Add workaround for DDR erratum A-008850
Barrier transactions from CCI400 need to be disabled till
the DDR is configured, otherwise it may lead to system hang.
The patch adds workaround to fix the erratum.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com>
Signed-off-by: Alison Wang <alison.wang@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-15 11:52:01 +05:30
Tom Rini
9659eb46af Merge branch 'master' of git://git.denx.de/u-boot-samsung 2019-03-14 11:37:11 -04:00
Adam Ford
8d0370905c arm: dts: imx6qdl-u-boot: Enable spba-bus@2000000 simple bus
spba-bus has a few nodes under it including the UART1 and
some ESPI buses.  In order to use them in SPL, the
u-boot,dm-spl flag needs to be added to the spba-bus@2000000
container.

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-03-13 09:14:35 +01:00
Fabio Estevam
75cd09cb18 imx8qxp: Fix the reported CPU frequency
Currently the CPU frequency is incorrectly reported:

CPU:   NXP i.MX8QXP RevB A35 at 147228 MHz

Fix this problem by using a direct call to the SCU firmware to
retrieve the Cortex A35 CPU frequency.

With this change applied the CPU frequency is displayed correctly:

CPU:   NXP i.MX8QXP RevB A35 at 1200 MHz

Tested-by: Marcelo Macedo <marcelo.macedo@nxp.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Andrejs Cainikovs <andrejs.cainikovs@netmodule.com>
2019-03-13 09:14:35 +01:00
Fabio Estevam
737d8bd820 pico-imx6ul: Convert to DM MMC
Select CONFIG_DM_MMC=y in order to support MMC driver model.

This allows the MMC board related code to be removed.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
2019-03-13 09:14:35 +01:00
Fabio Estevam
e5c2244fc8 pico-imx6ul: Import dts files from kernel
Import the device tree files from kernel 5.0-rc6 in preparation
for driver model conversion.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
2019-03-13 09:14:35 +01:00
Tom Rini
6a08213d52 Merge git://git.denx.de/u-boot-x86
- ACPI changes and fixes to Intel Tangier/Edison
- i8254 beeper fixes
2019-03-11 11:24:20 -04:00
Bin Meng
3592965aff x86: crownbay: Enable the beeper sound driver
Use the i8254 sound driver to support creating simple beeps.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-03-11 22:55:01 +08:00
Bin Meng
8edaf34cfe x86: coreboot: Add the missing pc speaker node in the device tree
This is currently missing and without it the i8254 beeper driver
won't work.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-03-11 22:55:01 +08:00
Bin Meng
9b2c8c3066 x86: Add a dtsi file for the pc speaker
The pc speaker driven by the i8254 is generic enough to deserve
a single dtsi file to be included by boards that use it.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-03-11 22:55:01 +08:00
Bin Meng
7d0a53a40c x86: Make sure i8254 is setup correctly before generating beeps
The i8254 timer control IO port (0x43) should be setup correctly
by using PIT counter 2 to generate beeps, however in U-Boot other
codes like TSC driver utilizes PIT for TSC frequency calibration
and configures the counter 2 to a different mode that does not
beep. Fix this by always ensuring the PIT counter 2 is correctly
initialized so that the i8254 beeper driver works as expected.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-03-11 22:55:01 +08:00
Krzysztof Kozlowski
be26c4af3a arm: dts: exynos: Adjust whitespace around status property
Just add spaces around '=' sign for clarity.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-11 15:53:36 +09:00
Krzysztof Kozlowski
ae781d56fe arm: dts: exynos: Add ramp delay property to LDO regulators to Odroid XU3 family
Add startup time to LDO regulators of S2MPS11 PMIC on Odroid XU3/XU4/HC1
family of boards to be sure the voltage is proper before relying on the
regulator.

The datasheet for all the S2MPS1x family is inconsistent here and does
not specify unambiguously the value of ramp delay for LDO.  It mentions
30 mV/us in one timing diagram but then omits it completely in LDO
regulator characteristics table (it is specified for bucks).

However the vendor kernels for Galaxy S5 and Odroid XU3 use values of 12
mV/us or 24 mV/us.

Without the ramp delay value the consumers do not wait for voltage
settle after changing it.  Although the proper value of ramp delay for
LDOs is unknown, it seems safer to use at least some value from
reference kernel than to leave it unset.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-11 15:53:19 +09:00
Krzysztof Kozlowski
b5d3faa9f9 arm: dts: exynos: Add supply for ADC block to Odroid XU3 family
The ADC block requires VDD supply to be on so provide one.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-11 15:53:19 +09:00
Tom Rini
19c8c9c103 Merge branch 'master' of git://git.denx.de/u-boot-socfpga
- Arria10 DRAM fixes and Gen5 cache fixes
2019-03-10 10:16:07 -04:00
Andy Shevchenko
d9b59fc9ae x86: edison: Add the rest of UARTs present on board
Intel Edison has three UART ports, i.e.
 port 0 - Bluetooth
 port 1 - auxiliary, available for general purpose use
 port 2 - debugging, usually console output is here

Enable all of them for future use.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-03-10 08:17:00 +08:00
Andy Shevchenko
ab83e5c1a2 x86: edison: Use proper number of serial interface
The console is actually serial #2. When we would like to enable other ports,
this would be not okay to mess up with the ordering.

Thus, fix the number of default console interface to be 2.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-03-10 08:17:00 +08:00
Andy Shevchenko
edf18a83f8 x86: acpi: Not every platform has serial console a first device
We may not do an assumption that current console device is always a first
of UCLASS_SERIAL one.

For example, on properly described Intel Edison board the console UART
is a third one.

Use current serial device as described in global data.

Fixes: a61cbad78e ("dm: serial: Adjust serial_getinfo() to use proper API")
Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-03-10 08:17:00 +08:00
Andy Shevchenko
c652dd1557 x86: acpi: Add DMA descriptors for I2C1 on Intel Tangier
Intel Tangier SoC has a general purpose DMA which can serve to speed up
communications on SPI and I2C serial buses.

Provide DMA descriptors to utilize this capability in the future.

Note, I2C6, which is available to user, has no DMA request lines connected.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-03-10 08:17:00 +08:00
Andy Shevchenko
1d2825aa30 x86: acpi: Add DMA descriptors for SPI5 on Intel Tangier
Intel Tangier SoC has a general purpose DMA which can serve to speed up
communications on SPI and I2C serial buses.

Provide DMA descriptors to utilize this capability in the future.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-03-10 08:17:00 +08:00
Marek Vasut
7544ad0303 ARM: socfpga: Disable D cache in SPL
The bootrom seems to leave the D-cache in messed up state, make sure
the SPL disables it so it can not interfere with operation.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Cc: Tien Fong Chee <tien.fong.chee@intel.com>
2019-03-09 17:59:13 +01:00
Dinh Nguyen
532a54e652 ARM: socfpga: fix data and tag latency values for pl310 cache controller
The values for the data and tag latency settings on the PL310 caches
controller is an (n-1). For example, the "arm,tag-latency" is specified
as <1 1 1>, so the values that should be written to register should be
0x000. And for the "arm,data-latency" specified as <2 1 1>, the register
value should be 0x010.

Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2019-03-09 17:59:13 +01:00
Eugeniu Rosca
3a4511ce4a ARM: dts: rmobile: Zap redundant USB/SDHI nodes on M3N
v2019.01 commit cbff9f80ce ("ARM: dts: rmobile: Sync Gen3 DTs with
Linux 4.19.6") made the sdhi/usb nodes available in r8a77965.dtsi.

Hence, remove the SDHI/USB nodes from r8a77965-u-boot.dtsi. This is
equivalent to partially reverting below v2019.01 commits:
 - f529bc551b ("ARM: dts: rmobile: Extract USB nodes on M3N")
 - 830b94f768 ("ARM: dts: rmobile: Extract SDHI nodes on M3N")

Duplicating the nodes from <soc>.dtsi to <soc>-u-boot.dtsi is obviously:
 - not needed if no U-boot-specific changes are needed in those nodes.
 - potentially dangerous/error-prone, since the duplicated properties
   override the properties originally defined in <soc>.dtsi. One
   possible consequence is that <soc>.dtsi is getting an update from
   Linux, while <soc>-u-boot.dtsi stays unchanged. In this situation,
   the obsolete property values from <soc>-u-boot.dtsi will take
   precedence masking some of the <soc>.dtsi updates, potentially
   leading to all kind of obscure issues.

Below is the dtdiff of r8a77965-salvator-x-u-boot.dtb (the only "user"
of r8a77965-u-boot.dtsi) before and after the patch (slightly
reformatted to avoid 'git am/apply' issues and to reduce the width).

What below output means is there is already a mismatch in some of
SDHI/USB nodes between r8a77965.dtsi and r8a77965-u-boot.dtsi. Since no
U-Boot customization is needed in SDHI/USB DT nodes, get rid of them in
r8a77965-u-boot.dtsi.

$> dtdiff before-r8a77965-salvator-x-u-boot.dtb \
           after-r8a77965-salvator-x-u-boot.dtb
 --- /dev/fd/63  2019-03-09 12:57:40.877963983 +0100
 +++ /dev/fd/62  2019-03-09 12:57:40.877963983 +0100
 @@ -1471,7 +1471,7 @@
        bus-width = <0x4>;
        cd-gpios = <0x51 0xc 0x1>;
        clocks = <0x6 0x1 0x13a>;
 -      compatible = "renesas,sdhi-r8a77965";
 +      compatible = "renesas,sdhi-r8a77965", "renesas,rcar-gen3-sdhi";
        interrupts = <0x0 0xa5 0x4>;
        max-frequency = <0xc65d400>;
        pinctrl-0 = <0x4d>;
 @@ -1492,7 +1492,7 @@

      sd@ee120000 {
        clocks = <0x6 0x1 0x139>;
 -      compatible = "renesas,sdhi-r8a77965";
 +      compatible = "renesas,sdhi-r8a77965", "renesas,rcar-gen3-sdhi";
        interrupts = <0x0 0xa6 0x4>;
        max-frequency = <0xbebc200>;
        power-domains = <0x1 0x20>;
 @@ -1504,7 +1504,7 @@
      sd@ee140000 {
        bus-width = <0x8>;
        clocks = <0x6 0x1 0x138>;
 -      compatible = "renesas,sdhi-r8a77965";
 +      compatible = "renesas,sdhi-r8a77965", "renesas,rcar-gen3-sdhi";
        fixed-emmc-driver-type = <0x1>;
        interrupts = <0x0 0xa7 0x4>;
        max-frequency = <0xbebc200>;
 @@ -1526,7 +1526,7 @@
        bus-width = <0x4>;
        cd-gpios = <0x5a 0xf 0x1>;
        clocks = <0x6 0x1 0x137>;
 -      compatible = "renesas,sdhi-r8a77965";
 +      compatible = "renesas,sdhi-r8a77965", "renesas,rcar-gen3-sdhi";
        interrupts = <0x0 0xa8 0x4>;
        max-frequency = <0xc65d400>;
        pinctrl-0 = <0x56>;
 @@ -1868,14 +1868,14 @@

      usb-phy@ee0a0200 {
        #phy-cells = <0x0>;
 -      clocks = <0x6 0x1 0x2be>;
 +      clocks = <0x6 0x1 0x2bf>;
        compatible = "renesas,usb2-phy-r8a77965", "renesas,rcar-gen3-usb2-phy";
        phandle = <0x47>;
        pinctrl-0 = <0x4c>;
        pinctrl-names = "default";
        power-domains = <0x1 0x20>;
        reg = <0x0 0xee0a0200 0x0 0x700>;
 -      resets = <0x6 0x2be>;
 +      resets = <0x6 0x2bf>;
        status = "okay";
      };

Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
2019-03-09 17:57:04 +01:00
Marek Vasut
fc3ed156f9 ARM: dts: rmobile: Force 1-bit bus width on Gen2 QSPI
U-Boot currently uses Gen2 QSPI in 1-bit mode, enforce it until
we can do better using the new SPI NOR framework.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-03-09 17:57:04 +01:00
Tom Rini
85887300ae Merge git://git.denx.de/u-boot-fsl-qoriq
- Enable DHCP as boot-source in distro boot for NXP layerscape
  platforms
- fix register layout for SEC on Layerscape architectures
- fixes related to DPAA2 ethernet
2019-03-04 13:05:53 -05:00
Laurentiu Tudor
7122f79141 armv8: fsl-layerscape: avoid DT fixup warning
sec_firmware reserves JR3 for it's own usage and deletes the JR3 node
from the device tree. This causes this warning to be issued when doing
the device tree fixup:

WARNING could not find node fsl,sec-v4.0-job-ring: FDT_ERR_NOTFOUND.

Fix it by excluding the device tree fixup for the JR reserved by
sec_firmware.

Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Reviewed-by: Bharat Bhushan <bharat.bhushan@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-03 22:01:14 +05:30
Laurentiu Tudor
e82d9ee73a armv8: fsl-layerscape: fix SEC QI ICID setup
The SEC QI ICID setup in the QIIC_LS register is actually an offset
that is being added to the ICID coming from the qman portal. Setting
it with a non-zero value breaks SMMU setup as the resulting ICID is
not known. On top of that, the SEC QI ICID must match the qman portal
ICIDs in order to share the isolation context.

Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Reviewed-by: Bharat Bhushan <bharat.bhushan@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-03 22:01:09 +05:30
Rajesh Bhagat
32413125b3 configs: fsl: move DDR specific defines to Kconfig
Moves below DDR specific defines to Kconfig:

CONFIG_FSL_DDR_BIST
CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
CONFIG_FSL_DDR_INTERACTIVE
CONFIG_FSL_DDR_SYNC_REFRESH

Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-03 20:56:01 +05:30
Heinrich Schuchardt
70eb82539b powerpc: enabled building with CONFIG_DM=y
Moving to the driver model requires CONFIG_DM to be enabled. Currently
several boards like kmeter1_defconfig produce a build error when CONFIG_DM
is enabled:

In file included from include/common.h:35,
                 from ./arch/powerpc/include/asm/fsl_lbc.h:10,
                 from include/mpc83xx.h:10,
                 from ./arch/powerpc/include/asm/ppc.h:27,
                 from ./arch/powerpc/include/asm/u-boot.h:18,
                 from include/dm/of.h:10,
                 from include/dm/ofnode.h:12,
                 from include/dm/device.h:13,
                 from include/linux/mtd/mtd.h:26,
                 from drivers/mtd/mtdconcat.c:25:
include/image.h: In function ‘image_check_target_arch’:
include/image.h:846:3: error: #error "please define IH_ARCH_DEFAULT in
                       your arch asm/u-boot.h"
 # error "please define IH_ARCH_DEFAULT in your arch asm/u-boot.h"
   ^~~~~
include/image.h:848:31: error: ‘IH_ARCH_DEFAULT’ undeclared (first use in
                        this function); did you mean ‘IH_ARCH_COUNT’?
  return image_check_arch(hdr, IH_ARCH_DEFAULT);

The error can be avoided by moving the definition of IH_ARCH_DEFAULT before

     #include <asm/ppc.h>

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-02 18:11:20 +05:30
Tom Rini
cfba74d0be Merge branch 'master' of git://git.denx.de/u-boot-socfpga
- SoCFPGA cache/gpio fixes
2019-02-28 18:57:32 -05:00
Tom Rini
35b05146f6 Merge branch 'master' of git://git.denx.de/u-boot-sh
- Gen2/Gen3 fixes for warnings and sdhi
2019-02-28 18:57:17 -05:00
Tom Rini
da206916a1 Merge branch 'master' of git://git.denx.de/u-boot-sunxi
- Various Bananapi fixes
2019-02-28 14:22:50 -05:00
Marek Vasut
86dc480d73 ARM: cache: Fix incorrect bitwise operation
The loop implemented in the code is supposed to check whether the
PL310 operation register has any bit from the mask set. Currently,
the code checks whether the PL310 operation register has any bit
set AND whether the mask is non-zero, which is incorrect. Fix the
conditional.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dalon Westergreen <dwesterg@gmail.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Tom Rini <trini@konsulko.com>
Fixes: 93bc21930a ("armv7: add PL310 support to u-boot")
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
2019-02-28 14:21:46 -05:00
Anup Patel
98a66ffa3a riscv: Enable CONFIG_SYS_BOOT_RAMDISK_HIGH for using initrd
This patch enables CONFIG_SYS_BOOT_RAMDISK_HIGH for RISC-V
because bootm will update initrd location in DTB only if
CONFIG_SYS_BOOT_RAMDISK_HIGH is enabled. If we don't enable
this option then bootm assumes DTB already has initrd details
which is not the case most of the time.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
2019-02-27 09:12:34 +08:00
Anup Patel
3fda0262c3 riscv: Add SiFive FU540 board support
This patch adds SiFive FU540 board support. For now, only
SiFive serial, SiFive PRCI, and Cadance MACB drivers are
only enabled. The SiFive FU540 defconfig by default builds
U-Boot for S-Mode because U-Boot on SiFive FU540 will run
in S-Mode as payload of BBL or OpenSBI.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-02-27 09:12:33 +08:00
Anup Patel
b630d57d0a clk: Add fixed-factor clock driver
This patch adds fixed-factor clock driver which derives clock
rate by dividing (div) and multiplying (mult) fixed factors
to a parent clock.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-02-27 09:12:33 +08:00
Anup Patel
26f4fd1cb4 riscv: generic: Ensure that U-Boot runs within 4GB for 64bit systems
On 64bit systems, the DRAM top can be easily beyond 4GB and U-Boot
DMA mapping APIs will generate DMA addresses beyond 4GB. This
breaks DMA programming in 32bit DMA capable devices (such as
Cadence MACB ethernet). For example, If DRAM is more then 2GB
on QEMU sifive_u machine then Cadence MACB ethernet stops working
for U-Boot because it is a 32bit DMA capable device.

To handle 32bit DMA capable devices on 64bit systems, we provide
custom implementation of board_get_usable_ram_top() which ensures
that usable ram top is not more then 4GB. This in-turn ensures
that U-Boot always runs within 4GB hence DMA addresses generated
by DMA mapping APIs will be within 4GB too.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-02-27 09:12:33 +08:00
Anup Patel
1fa625b8e4 riscv: Add place-holder asm/arch/clk.h for driver compilation
Some of the drivers (such as Cadence MACB ethernet driver) expect
asm/arch/clk.h to be provided by arch support so we add place-holder
asm/arch-generic/clk.h for RISC-V generic CPU.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
2019-02-27 09:12:33 +08:00
Anup Patel
70b8562dcf riscv: Add asm/dma-mapping.h for DMA mappings
This patch adds asm/dma-mapping.h for Linux-like DMA mappings
APIs required by some of the drivers (such as, Cadance MACB
Ethernet driver).

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
2019-02-27 09:12:33 +08:00
Anup Patel
fdff1f96a6 riscv: Rename cpu/qemu to cpu/generic
The QEMU CPU support under arch/riscv is pretty much generic
and works fine for SiFive Unleashed as well. In fact, there
will be quite a few RISC-V SOCs for which QEMU CPU support
will work fine.

This patch renames cpu/qemu to cpu/generic to indicate the
above fact. If there are SOC specific errata workarounds
required in cpu/generic then those can be done at runtime
in cpu/generic based on CPU vendor specific DT compatible
string.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-02-27 09:12:33 +08:00
Anup Patel
7c8d210b91 riscv: Enable create symlink using kconfig
We select CREATE_ARCH_SYMLINK for RISC-V so that we can have
include/asm/arch linked to include/asm/arch-xyz.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-02-27 09:12:33 +08:00
Marek Vasut
30b62ca086 ARM: rmobile: Imply SoC per board
Imply all SoCs supported by a given board. This allows building single
U-Boot binary for boards which can have multiple SoCs.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-02-25 16:07:41 +01:00
Marek Vasut
669367f6a4 ARM: rmobile: Imply pinctrl drivers per SoC
Imply preferred pin control driver per SoC, no functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-02-25 16:07:41 +01:00
Marek Vasut
46467ceaf4 ARM: rmobile: Imply clock drivers per SoC
Imply preferred clock driver per SoC, no functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-02-25 16:07:41 +01:00
Marek Vasut
4a9743f73c ARM: socfpga: Clear PL310 early in SPL
On SoCFPGA Gen5 systems, it can rarely happen that a reboot from Linux
will result in stale data in PL310 L2 cache controller. Even if the L2
cache controller is disabled via the CTRL register CTRL_EN bit, those
data can interfere with operation of devices using DMA, like e.g. the
DWMMC controller. This can in turn cause e.g. SPL to fail reading data
from SD/MMC.

The obvious solution here would be to fully reset the L2 cache controller
via the reset manager MPUMODRST L2 bit, however this causes bus hang even
if executed entirely from L1 I-cache to avoid generating any bus traffic
through the L2 cache controller.

This patch thus configures and enables the L2 cache controller very early
in the SPL boot process, clears the L2 cache and disables the L2 cache
controller again.

The reason for doing it in SPL is because we need to avoid accessing any
of the potentially stale data in the L2 cache, and we are certain any of
the stale data will be below the OCRAM address range. To further reduce
bus traffic during the L2 cache invalidation, we enable L1 I-cache and
run the invalidation code entirely out of the L1 I-cache.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dalon Westergreen <dwesterg@gmail.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
2019-02-25 16:07:36 +01:00
Marek Vasut
2c0b300bc3 ARM: socfpga: Configure PL310 latencies
Configure the PL310 tag and data latency registers, which slightly
improves performance and aligns the behavior with Linux.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dalon Westergreen <dwesterg@gmail.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
2019-02-25 16:07:36 +01:00
Marek Vasut
b275c9aba6 ARM: cache: Fix incorrect bitwise operation
The loop implemented in the code is supposed to check whether the
PL310 operation register has any bit from the mask set. Currently,
the code checks whether the PL310 operation register has any bit
set AND whether the mask is non-zero, which is incorrect. Fix the
conditional.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dalon Westergreen <dwesterg@gmail.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Tom Rini <trini@konsulko.com>
Fixes: 93bc21930a ("armv7: add PL310 support to u-boot")
2019-02-25 16:07:36 +01:00
Tom Rini
888f9aa5ca Merge branch 'master' of git://git.denx.de/u-boot-tegra 2019-02-20 12:28:57 -05:00
Tom Rini
0c41e59a37 Merge git://git.denx.de/u-boot-x86
- Add support for sound.

Albeit the big changeset, changes are pretty limited to x86 only and a
few new sound drivers used by x86 so I think it would be good to have
this in the next release.
2019-02-20 12:28:40 -05:00
Tom Rini
176b32cd4f Merge git://git.denx.de/u-boot-fsl-qoriq
- Support of NXP's LX2160RDB and LX2160QDS platform
- Enable SATA DM model for NXP's ARM SoCs
2019-02-20 12:26:05 -05:00
Tristan Bastian
8105816cbb ARM: tegra: enable ums on nyan boards
This patch enables UMS on the nyan devices like the nyan-big.
A patch like this has been sent in by Stephen Warren some time ago for
other tegra devices: commit e6607cffef.
But the nyan devices never received that functionality.

Signed-off-by: Tristan Bastian <tristan-c.bastian@gmx.de>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-02-20 09:01:44 -07:00
Tristan Bastian
74a7d9af3f nyan-big: change spi delay
Internal keyboard of nyan-big is only working when cold booting by pressing [reload/refresh]+[power] button.
With this patch keyboard is working by only pressing [power] button.

Signed-off-by: Tristan Bastian <tristan-c.bastian@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-02-20 09:01:44 -07:00
Simon Glass
e2c901c99e x86: Add sound support for samus
Enable sound on samus using the broadwell I2S and an RT5677 audio codec.

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2019-02-20 15:27:11 +08:00
Simon Glass
3f3411ebf8 x86: broadwell: Add support for serial I/O devices
Add support for initing the I2C device and ADSP on broadwell. These are
needed for sound to work.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-02-20 15:27:10 +08:00
Simon Glass
c692f82240 x86: broadwell: Don't bother probing the PCH for pinctrl
At present the pinctrl probes the PCH but since it only uses it to obtain
a PCI address, this is no necessary. Avoiding this fixes one of the two
co-dependent loops in broadwell.

This driver really should be a proper pinctrl driver, but for now it
remains a syscon device.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-02-20 15:27:10 +08:00
Simon Glass
23e8bd7e49 x86: broadwell: Add support for the ADSP
The Application Digital Signal Processor is used for sound processing with
broadwell. Add a driver to support this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-02-20 15:27:10 +08:00
Simon Glass
79a5be820d sound: x86: Add beeping support in i8254
Adjust the code to allow beeping at different frequencies, using a
calculated value for timer 2.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-02-20 15:27:09 +08:00
Simon Glass
6744c0d652 sound: x86: link: Add sound support
Add sound support for link, using the HDA codec implementation.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-02-20 15:27:09 +08:00
Simon Glass
ecc7973d1c sandbox: sound: Silence sound for testing
When testing the sound system we don't need the hear the beeps. The
testing works by checking the data that would be emitted. Add a
device-tree property to silence the sound, and enable it for testing.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-02-20 15:27:09 +08:00
Simon Glass
2850266965 sound: Add uclass operations for beeping
Some audio codecs such as Intel HDA do not need to use digital data to
play sounds, but instead have a way to emit beeps. Add this interface as
an option. If the beep interface is not supported, then the sound uclass
falls back to the I2S interface.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-02-20 15:27:08 +08:00
Simon Glass
67b0cda76a x86: ivybridge: Add a way to get the HDA config setting
Add a way check to whether HD audio is enabled. Use ioctl() to avoid
adding too many unusual operations to PCH.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-02-20 15:27:08 +08:00
Simon Glass
b45c833c71 sandbox: pch: Add a test for the PCH uclass
This uclass currently has no tests. Add a sandbox driver and some simple
tests to provide basic coverage.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
[bmeng: Use "sandbox,pch" for the compatible string, for consistency]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-02-20 15:26:36 +08:00
Simon Glass
c882163b09 x86: sandbox: pch: Add a CONFIG option for PCH
At present this uclass is selected only on x86. In order to add a test for
it, it must also support sandbox. Create a new CONFIG_PCH option and
enable it on x86 and sandbox.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-02-20 15:25:30 +08:00
Simon Glass
3a44bfdf08 x86: Adjust I/O macros to work on 64-bit machines
At present these macros give warnings on 64-bit machines and do not
correctly do 32-bit accesses. Update them to use linux types.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-02-20 15:25:29 +08:00
Simon Glass
c6d84a30fe sandbox: Add a note about the growing state_info struct
This struct is getting larger and in some cases is being used for things
which would be better put into a driver. For example hwspinlock is not
used outside of sandbox_hwspinlock.c.

Add a note to encourage people to put things elsewhere.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-02-20 15:25:29 +08:00
Derald D. Woods
36a75344d7 ARM: omap3: evm: Update DM SPL support
- Switch to using the omap3-u-boot.dtsi file for needed properties
- Enable SPL_OF_CONTROL

This commit is based on the following series:

https://patchwork.ozlabs.org/project/uboot/list/?series=92472
https://patchwork.ozlabs.org/project/uboot/list/?series=92462

Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-02-19 16:58:24 -05:00
Tom Rini
e0cc7df9fd omap3_beagle: Update for DM SPL support
- Switch to using the omap3-u-boot.dtsi file for needed properties.
- Remove a few SPL features to free up more SRAM space.
- Switch CONFIG_SYS_TEXT_BASE to the normal default, we don't need to
  worry about X-Loader at this point anymore.
- A few related updates to SPL options as part of switching to DM SPL.

Signed-off-by: Tom Rini <trini@konsulko.com>
Tested-by: Derald D. Woods <woods.technical@gmail.com>
2019-02-19 16:58:23 -05:00
Adam Ford
0cd9465c0b ARM: omap3_logic: Enable SPL booting device tree
With the generic omap3-u-boot.dtsi file available, this patch
increased the memory of the various incarnations of the omap3_logic
board, and points their respective u-boot.dtsi files to the newly
created generic one, and removes the PLATDATA from the board file.

These are all done at once because the're all utilizing the same
omap3logic.c board file.

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-02-19 16:58:23 -05:00
Adam Ford
ed59a76db0 ARM: DTS: omap3-u-boot.dtsi
Create generic omap3-u-boot.dtsi file that omap3 based boards
can include to generate device tree in SPL for booting MLO.

Credit should go to Tom Rini.

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Tested-by: Derald D. Woods <woods.technical@gmail.com>
2019-02-19 16:58:23 -05:00
Hannes Schmelzer
eaba7df704 board/BuR/brxre1: convert do DM
This commit converts the brxre1 board to DM,
for this we have todo following things:

- add a devicetree-file for this board
- drop all obsolete settings from board header-file
- use dm_i2c_xxx calls for read/write to the resetcontroller
- request gpios before operate them

Serues-cc: trini@konsulko.com
Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2019-02-19 08:55:43 -05:00
Peng Ma
f11e492aea armv8: ls1043a: move SCSI_AHCI and SCSI to arm/Kconfig
remove SCSI and SCSI_AHCI configs for ls1043ardb due to no sata interface
support.
this changed is to fixed the ls1043ardb compile warning as fallows:

===================== WARNING ======================
This board does not use CONFIG_DM_SCSI. Please update
the storage controller to use CONFIG_DM_SCSI before the
v2019.07 release. Failure to update by the deadline may
result in board removal.See doc/driver-model/MIGRATION.txt
for more info.
====================================================

Signed-off-by: Peng Ma <peng.ma@nxp.com>
[PK: reword the patch subject]
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-19 10:26:44 +05:30
Rajesh Bhagat
5c08d96f3a armv8: layerscape: move CONFIG_LAYERSCAPE to Kconfig
Moves CONFIG_LAYERSCAPE for all NXP Layerscape platforms.

Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-19 10:26:44 +05:30
Rajesh Bhagat
bbf5b25282 armv8: layerscape: move TZASC and TZPC configs to Kconfig
Moves FSL_TZASC_400 and FSL_TZPC_BP147 configs to Kconfig
for LS1088A and LS2088A platforms.

Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-19 10:26:44 +05:30
Pankaj Bansal
1eba723c72 lx2160aqds : Add support for LX2160AQDS platform
LX2160AQDS is a development board that supports LX2160A
family SoCs. This patch add base support for this board.

Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com>
[PK: Sqaush patch for "secure boot defconfig" & add maintainer]
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-19 10:26:44 +05:30
Meenakshi Aggarwal
e088e587ed armv8: emc2305: add support for fan controller
Add support for fan controller emc2305.

Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-19 10:26:43 +05:30
Priyanka Jain
58c3e62040 armv8: lx2160ardb : Add support for LX2160ARDB platform
LX2160ARDB is an evaluation board that supports LX2160A
family SoCs. This patch add base support for this board.

Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com>
Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Signed-off-by: Pankit Garg <pankit.garg@nxp.com>
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Signed-off-by: Peng Ma <peng.ma@nxp.com>
Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
[PK: Sqaush patches from Yinbo Zhu, Peng Ma, Chuanhua Han
and re-arrange defconfig]
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-19 10:26:43 +05:30
Pankaj Bansal
2e53759dc6 armv8: fsl-layerscape: reorder rgmii dpmacs' enablement
some dpmacs in armv8a based freescale layerscape SOCs can be
configured via both serdes(sgmii, xfi, xlaui etc) bits and via
EC*_PMUX(rgmii) bits in RCW.
e.g. dpmac 17 and 18 in LX2160A can be configured as SGMII from
serdes bits and as RGMII via EC1_PMUX/EC2_PMUX bits
Now if a dpmac is enabled by serdes bits then it takes precedence
over EC*_PMUX bits. i.e. in LX2160A if we select serdes protocol
that configures dpmac17 as SGMII and set the EC1_PMUX as RGMII,
then the dpmac is SGMII and not RGMII.

Therefore, move the fsl_rgmii_init after fsl_serdes_init. in
fsl_rgmii_init function of SOC, we will check if the dpmac is enabled
or not? if it is (fsl_serdes_init has already enabled the dpmac), then
don't enable it.

Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-19 10:26:43 +05:30
Priyanka Jain
8c4875395b armv8, lx2160a: Initialize ethernet array in serdes_init
Add code to initial ethernet interface arrays
with corresponding dpmac-id values in serdes_init function
for LX2160A.

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-19 10:26:43 +05:30
Meenakshi Aggarwal
b3b7706b2f arch: arm: lib: Flush L3 after relocation to DDR
Flush L3 cache after uboot relocated to DDR.

Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Signed-off-by: Udit Kumar <udit.kumar@nxp.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-19 10:26:43 +05:30
Priyanka Jain
fc615be4a6 armv8: lx2160a: Update CONFIG_SYS_FSL_PEBUF_BASE
As per hardware documentation,
CONFIG_SYS_FSL_PEBUF_BASE for lx2160a is 0x1c00000000

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-19 10:26:43 +05:30
Simon Goldschmidt
473f55676a arm: socfpga: gen5: remove hacked ETH RST handling
The 'dwmac_socfpga' ETH driver can now get the MACs out of reset
via the socfpga reset driver and can set PHY mode via syscon.

This means we can now remove the ad-hoc code to do this from
arch/arm/mach-socfpga.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-02-18 13:00:53 +01:00
Chen-Yu Tsai
da95ed58c4 sunxi: Add Bananapi M2+ H5 board
As the H5 is pin compatible with the H3, vendors tend to upgrade their
existing H3 products with an H5 SoC swap. This is the case with the
Bananapi M2+ H5.

Add the following to support it:

  - device tree file: synced from Linux v5.0-rc1,
  - defconfig: copy of bananapi_m2_plus_h3_defconfig with only SoC
	       family and default device tree file name changed
  - MAINTAINERS entry

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2019-02-18 14:46:53 +05:30
Chen-Yu Tsai
7761eb5bea sunxi: Sync Bananapi M2+ device tree from Linux v5.0-rc1
As of commit aa8fee415f46 ("ARM: dts: sun8i: h3: Split out
non-SoC-specific parts of Bananapi M2 Plus") in the Linux kernel, the
device tree for the Bananapi M2+ has been split into a common dtsi file,
and an SoC-specific board device tree file that includes both the shared
dtsi file and the soc dtsi file. This was done to support both the H3
and H5 variants of the same board. This is similar to what was done for
the Libre Computer ALL-H3-CC in U-boot commit d7b17f1c24 ("sunxi: Split
out common board design for ALL-H3-CC device tree").

The newly split files are directly synced from Linux tag v5.0-rc1.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2019-02-18 13:54:23 +05:30
Tom Rini
b89074f650 u-boot-imx-2019-02-16
---------------------
 
 - vhybrid: add calibration
 - gw_ventana: fixes
 - Improve documentation for Secure Boot (HABv4)
 - Fix Marvell Switch
 - MX6 Sabre, switch to DM
 - Fixes for NAND
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAlxn6N8PHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et3SiEL/iU7JK7wYL1f2KN9k5ejWuYBsbh8rzvlnjVL
 8gdry7NsTCMFATk/MKBRkKxlguumE2PCjijEqsbpQArxVVsR9cmuw7d4RagXJqcZ
 T0Wl8RCgNWDgwm717/boX5jlTWd8HA5DETQP5atJhkd5aiM95kM3lNP1K8AJ2mmP
 GMEUEPeEh3Kht9tU4OibHkNApZD8wTWSS9FndSocEi9tEPrEbvhFW8Q5sZv+aRsO
 d7GQVSsesmC7dV2b0t0GpQKEDlkco787A+F9ScL5Twb8+eAhDzhJxYFBs1vP8Gu2
 miVcGpfO3ZBwpgk/RjI6rGPOzFuaiW8LRttWBgjYcDXykCPmsk+5nojdN197qzkj
 KvfcgVlFAWZ1mVsHiYlbaKwlUllVtM1RxJewFNkteMe4C8yWH9307IUApZCwnwTV
 xZPmhSdoAWbBfe3kTmYpJkrRYcdgpJ1gx9JSyfGi8lg+nlaX6rFVqM0Y8qsk8teo
 a7yShI2cFG1Hv2LJ2eAVrjqMtjP9ZA==
 =TWGQ
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-2019-02-16' of git://git.denx.de/u-boot-imx

u-boot-imx-2019-02-16
---------------------

- vhybrid: add calibration
- gw_ventana: fixes
- Improve documentation for Secure Boot (HABv4)
- Fix Marvell Switch
- MX6 Sabre, switch to DM
- Fixes for NAND
2019-02-16 08:31:05 -05:00
Max Krummenacher
6ed4d26c21 imx: cpu.c: give access to reset cause in spl
This makes get_imx_reset_cause() accessible in SPL, but keeps the SRSR
register content intact so that U-Boot proper can evaluated the
reset_cause again should this be needed.

Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-02-15 22:01:15 +01:00
Marcel Ziswiler
63c918d188 ARM: dts: i.MX6Q, i.MX6QDL: fix address/size-cells warnings
This fixes the following warnings:

arch/arm/dts/imx6-apalis.dtb: Warning (avoid_unnecessary_addr_size):
 /clocks: unnecessary #address-cells/#size-cells without "ranges" or
 child "reg" property
arch/arm/dts/imx6-apalis.dtb: Warning (avoid_unnecessary_addr_size):
 /soc/aips-bus@02100000/mipi@021e0000: unnecessary #address-cells/
 #size-cells without "ranges" or child "reg" property
arch/arm/dts/imx6-apalis.dtb: Warning (avoid_unnecessary_addr_size):
 /soc/ipu@02400000/port@2: unnecessary #address-cells/#size-cells
 without "ranges" or child "reg" property
arch/arm/dts/imx6-apalis.dtb: Warning (avoid_unnecessary_addr_size):
 /soc/ipu@02400000/port@3: unnecessary #address-cells/#size-cells
 without "ranges" or child "reg" property
arch/arm/dts/imx6-apalis.dtb: Warning (avoid_unnecessary_addr_size):
 /soc/ipu@02800000/port@2: unnecessary #address-cells/#size-cells
 without "ranges" or child "reg" property
arch/arm/dts/imx6-apalis.dtb: Warning (avoid_unnecessary_addr_size):
 /soc/ipu@02800000/port@3: unnecessary #address-cells/#size-cells
 without "ranges" or child "reg" property

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-02-15 22:01:15 +01:00
Abel Vesa
67f165ddfd arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd]
Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd] to the ones
from kernel v4.20 (commit 8fe28cb58bcb2).

Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-02-15 22:01:15 +01:00
Abel Vesa
e72e3549a8 arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files
This allows us to keep the basic dts[i] files up-to-date with
the ones in kernel, but at the same time allowing the u-boot
to add its own properties to the existing nodes.

Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-02-15 22:01:15 +01:00
Abel Vesa
79536013a3 usb: Rename SPL_USB_SUPPORT to SPL_USB_STORAGE
Since there is the SPL_USB_HOST_SUPPORT for enabling USB support in SPL,
makes more sense to rename the SPL_USB_SUPPORT as SPL_USB_STORAGE.
Everything that is not part of the usb storage support in SPL is now
build under SPL_USB_HOST_SUPPORT.

Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-02-15 22:01:15 +01:00
Venkatesh Yadav Abbarapu
053d4bd472 arm64: zynqmp: Change the spi-rx-bus-width property to x1
As per the zc1275 design x1 mode is enabled so changing the
spi-rx-bus-width property to x1.

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-02-15 15:04:01 +01:00
Shubhrajyoti Datta
ccc8a11935 arm64: zynqmp: Fix i2c boot warning
Fix the below warning as the core looks for the compatible
string.

[    5.198919] i2c i2c-18: of_i2c: modalias failure on
/amba/i2c@ff030000/i2c-mux@75/i2c@3/dev@19
[    5.207454] i2c i2c-18: Failed to create I2C device for
/amba/i2c@ff030000/i2c-mux@75/i2c@3/dev@19
[    5.216394] i2c i2c-18: of_i2c: modalias failure on
/amba/i2c@ff030000/i2c-mux@75/i2c@3/dev@30
[    5.224986] i2c i2c-18: Failed to create I2C device for
/amba/i2c@ff030000/i2c-mux@75/i2c@3/dev@30
[    5.233927] i2c i2c-18: of_i2c: modalias failure on
/amba/i2c@ff030000/i2c-mux@75/i2c@3/dev@35
[    5.242527] i2c i2c-18: Failed to create I2C device for
/amba/i2c@ff030000/i2c-mux@75/i2c@3/dev@35
[    5.263880] i2c i2c-18: of_i2c: modalias failure on
/amba/i2c@ff030000/i2c-mux@75/i2c@3/dev@36
[    5.272477] i2c i2c-18: Failed to create I2C device for
/amba/i2c@ff030000/i2c-mux@75/i2c@3/dev@36
[    5.281415] i2c i2c-18: of_i2c: modalias failure on
/amba/i2c@ff030000/i2c-mux@75/i2c@3/dev@51
[    5.290008] i2c i2c-18: Failed to create I2C device for
/amba/i2c@ff030000/i2c-mux@75/i2c@3/dev@51

Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-02-15 15:04:01 +01:00
Michal Simek
1317a5e5ea arm64: zynqmp: Remove autodetected devices without description
It will never reach mainline that's why remove it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-02-15 15:04:01 +01:00
Amit Kucheria
9a06ed88f4 arm64: dts: Fix various entry-method properties to reflect documentation
The idle-states binding documentation[1] mentions that the
'entry-method' property is required on 64-bit platforms and must be
set to "psci".

Linux commit a13f18f59d26 ("Documentation: arm: Fix typo in the idle-states
bindings examples") attempted to fix this earlier but clearly more is
needed.

Linux docs:
Documentation/devicetree/bindings/arm/idle-states.txt (see
idle-states node)

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-02-15 15:04:01 +01:00
Michal Simek
91af22bc6b xilinx: dts: Remove additional empty lines
Trivial fix.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-02-15 15:04:01 +01:00
Mounika Grace Akula
3c8ee337eb arm64: zynqmp: Add reset-on-timeout for all boards and modify default timeout value
This patch adds reset-on-timeout to FPD WDT which will trigger an
interrupt to PMU when watchdog expiry happens and PMU takes the
necessary action. If this property is not enabled, reason will not be
known when watchdog expiry happens.
This patch also modifies the default timeout to 60 seconds. Reason is
that if u-boot enables WDT, it will set the timeout to 10 seconds and
this is not enough to boot till Linux and start the WDT application in
Linux. 60 seconds is the maximum safest value to boot till Linux and
start the WDT application.

Users need to change this timeout value to fit their needs.

Signed-off-by: Mounika Grace Akula <mounika.grace.akula@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-02-15 15:04:01 +01:00
Luis Araneda
9896dc6558 ARM: dts: zynq: correct and improve the model property of dt files
Replace the current value of the model property by a more accurate
description of each board (which includes the manufacturer), as some
of the boards had the same value ("Xilinx Zynq")

Signed-off-by: Luis Araneda <luaraneda@gmail.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-02-15 15:04:00 +01:00
Luis Araneda
cd6160b9c1 ARM: dts: zynq: Set correct manufacturer for ZedBoard and MicroZed boards
Both boards are made by Avnet, Inc. So add an additional
value to the compatible property

Signed-off-by: Luis Araneda <luaraneda@gmail.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-02-15 15:04:00 +01:00
Michal Simek
7b85f7901d ARM: dts: Use mmc@ instead sdhci@
mmc name is recommended based on devicetree specification.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-02-15 15:04:00 +01:00
Marcin Niestroj
c4f225d19f ARM: dts: imx6ul-lite*: add DTS files for liteSOM and liteboard
Import liteSOM and liteboard dts files from Linux v4.20. They will
be used after transition to driver model and device-tree based boot.

Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
2019-02-15 12:45:15 +01:00
Lukasz Majewski
dc619924c7 ddr: vybrid: Add calibration code to memory controler's (DDRMC) setup code
This patch extends the vf610 DDR memory controller code to support SW
leveling.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Stefan Agner <stefan.agner@toradex.com>
2019-02-15 12:16:50 +01:00
Lukasz Majewski
548cc1095f ddr: vybrid: Provide code to perform on-boot calibration
This patch provides the code to calibrate the DDR's
DQS to DQ signals (RDLVL).

It is based on:
VFxxx Controller Reference Manual, Rev. 0, 10/2016, page 1600
10.1.6.16.4.1 "Software Read Leveling in MC Evaluation Mode"

and NXP's community thread:
"Vybrid: About DDR leveling feature on DDRMC."
https://community.nxp.com/thread/395323

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-02-15 12:16:50 +01:00
Lukasz Majewski
c5b22a5360 ddr: vybrid: Add DDRMC calibration related registers (DQS to DQ)
This commit provides extra defines needed for DDR memory controller
calibration (read leveling performing).

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Stefan Agner <stefan.agner@toradex.com>
2019-02-15 12:16:50 +01:00
Michal Simek
35e2b92344 arm64: zynqmp: Fix logic around CONFIG_ZYNQ_SDHCI
Replace SDHCI controller listing by Kconfig symbol to let SPL know that
this board is using multiple SDHCIs controllers.
Kconfig help message should explain why this is needed.
Origin symbols were used in full u-boot but with moving to distro boot
this was fixed already.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-02-14 14:31:10 +01:00
Michal Simek
6a9a7b81c6 arm64: zynqmp: Remove addresses for i2c controllers
All platforms have been converted to DM that's why there is no reason to
keep addresses in headers. They are all read from DT now.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2019-02-14 14:31:10 +01:00
Michal Simek
8bdad43333 arm64: zynqmp: Switch all platforms to DM_I2C
CONFIG_PCA953X is not needed because of PCA953X is integrated in gpio
subsystem already. That's why also remove CMD_PCA953X which is only for
this driver.

zcu102/zcu104-revC/zcu106/zcu111 contain links to eeprom which stores MAC address.

DM_I2C is not enabled for the whole SoC because it increase size for
mini configurations and there is no I2C symbol present to setup
dependencies.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2019-02-14 14:31:10 +01:00
Michal Simek
e0bc7574fa ARM: zynq: Remove addresses for i2c controllers
All platforms have been converted to DM that's why there is no reason to
keep addresses in headers. They are all read from DT now.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2019-02-14 14:31:10 +01:00
Michal Simek
aeac8921ab ARM: zynq: Convert Syzygy to DM_I2C
Boards have only one controller enabled that's why move to DM_I2C is
easy.
Add also i2c alias for not to be shown as i2c bus -1 because alias
doesn't exist.
Config file points to MAC stored in eeprom but it is not listed that's
why I have added 24c08 part.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2019-02-14 14:31:10 +01:00
Siva Durga Prasad Paladugu
eebbfd865b arm64: versal: Add mini configuration for Versal
This patch adds new mini target for versal.
This configuration is very minimal in size which runs
from OCM. It contains support for mtest which can be
used for running DDR memory tests.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-02-14 14:31:10 +01:00
Michal Simek
47a766f950 arm64: versal: Move IOU_SWITCH_DIVISOR0 to Kconfig
Move hardcoded IOU_SWITCH_DIVISOR0 to Kconfig to be able to set it up
for different platforms.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-02-14 14:31:10 +01:00
Siva Durga Prasad Paladugu
0fbd2a8225 arm64: versal: Add mini eMMC configuration
This patch adds mini eMMC configuration which has only
emmc0 and emmc1 functionalities and can run from small
amount of memory. This is required for memory constraint
devices.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-02-14 14:31:09 +01:00
Siva Durga Prasad Paladugu
4244f2b7e8 arm64: versal: Add new Kconfig SYS_MEM_RSVD_FOR_MMU
This patch adds new config option which is used for
reserving a specific memory for MMU Table and in this
case we are using TCM for that purpose.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-02-14 14:31:09 +01:00
Alexander Graf
2f8ab1218f arm: Leave smccc calls in .text when efi_loader=n
Commit 81ea00838c ("efi_loader: PSCI reset and shutdown") put the SMCCC
assembly code into the efi specific code section. This is wrong when we
do not have EFI_LOADER enabled, as that strips efi runtime sections from
the output binary

Reported-by: Michal Simek <monstr@monstr.eu>
Reported-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Tested-by: Michal Simek <monstr@monstr.eu>
Fixes: 81ea00838c ("efi_loader: PSCI reset and shutdown")
Signed-off-by: Alexander Graf <agraf@suse.de>
2019-02-13 09:40:06 +01:00
Heinrich Schuchardt
6b59607f10 x86: do not use i386 code for x86_64 memory functions
arch/x86/lib/string.c contains assembler implementations of memcpy(),
memmove(), and memset() written for i386. Don't use it on x86_64.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2019-02-13 09:40:06 +01:00
Heinrich Schuchardt
f6c6df7ebc efi_loader: refactor switch to non-secure mode
Refactor the switch from supervisor to hypervisor to a new function called
at the beginning of do_bootefi().

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2019-02-13 09:40:06 +01:00
Heinrich Schuchardt
e4fd695645 efi_selftest: allow building on ARMv7-M
ARMv7-M only supports the Thumb instruction set. Our current crt0 code does
not support it. With the patch we can build all unit tests of the EFI
subsystem that do not require crt0.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2019-02-13 09:40:05 +01:00
Andy Shevchenko
24b56e2bf3 x86: tangier: Add initial ACPI support for PMIC device
Basin Cove PMIC is connected to I2C0 bus which is hidden from the OS
and access is going via SCU device, enumerated via PCI.

For now, we add just a minimum support of PMIC device to allow enabling,
e.g. USB OTG, in the OS.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Bin Meng <bmeng.cn@gmail.com>
2019-02-12 14:37:17 +08:00
Bin Meng
bc1a8f0d7a x86: Use the existing GDT in the ROM for 64-bit U-Boot proper
It is unnecessary to use a RAM version GDT for 64-bit U-Boot proper.
In fact we can just use the ROM version directly, which not only
eliminates the risk of being overwritten by application, but also
removes the complexity of patching the cpu_call64().

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-02-12 14:37:17 +08:00
Bin Meng
9168326037 x86: Don't copy the cpu_call64() function to a hardcoded address
Before jumping to 64-bit U-Boot proper, SPL copies the cpu_call64()
function to a hardcoded address 0x3000000. This can have potential
conflicts with application usage. Switch the destination address
to be allocated from the heap to avoid such risk.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-02-12 14:37:16 +08:00
Bin Meng
dbb0696ba0 x86: Change 4-level page table base address to low memory
At present the 4-level page table base address for 64-bit U-Boot
proper is assigned an address that conflicts with CONFIG_LOADADDR.
Change it to an address within the low memory range instead.

Fixes crashes seen when 'dhcp' on QEMU x86_64 with
"-net nic -net user,tftp=.,bootfile=u-boot".

Reported-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-02-12 14:37:16 +08:00
Baruch Siach
d7f165cf67 arm: mvebu: cf gt-8k: dts: add PCIe slot reset support
Describe the mini-PCIe slot gpio reset signal. This enables PCIe devices
on Clearfog GT-8K.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2019-02-11 09:39:12 +01:00
Baruch Siach
f301ba55c8 arm: mvebu: mcbin: dts: fix PCIe reset polarity
The PCIe slot PERST signal is active low. Fix the gpio signal
description in the dts.

This happened to work because the pcie_dw_mvebu driver sets the reset
gpio level to 1 (high) to release the reset. The following commit will
fix that.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2019-02-11 09:39:12 +01:00
Tom Rini
151b8339cc Samsung sound patches (applied for Samsung maintainer)
Common sound support
 buildman environment support
 of-platdata documentation improvements
 -----BEGIN PGP SIGNATURE-----
 
 iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAlxf7igRHHNqZ0BjaHJv
 bWl1bS5vcmcACgkQfxc6PpAIreYKfggApQiL0Gv6NdGAQN+zfpjKY5a2QyjKsAxa
 KLm3q8XyXIQXufMWOEPoW1iWm0iixpIFgChy8ff3m/OPDzsx99UXDTyvjitsSxtQ
 5tFu8K78nUZT6OOE3HNhhlyW/xK442oKBzGt4MUt3kUZOELsCNuftgbJUWksHuO3
 6pPrgt36E0uRGbUA4ioYCU336viJRPOOCdqb8hHViEihFj/IEv5T82RdE5y97YxG
 dT7BZxjPkBH5ZN1uD/tdxG1k6IZBagZiYoDAsYp4YqNwmVsm5sLrZ9QVSf7EcH/y
 qX8butZesiMd7xm7RROlrIImh7fb36N3zsoRiUWZDo1Al3IRkmZyVA==
 =tdut
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-10feb19' of git://git.denx.de/u-boot-dm

Samsung sound patches (applied for Samsung maintainer)
Common sound support
buildman environment support
of-platdata documentation improvements
2019-02-10 08:11:32 -05:00
Simon Glass
e898799ce4 samsung: mmc: Drop old MMC init code
Now that these boards use driver model we can drop the old code. At
present s5p_mmc_init() is still used by goni and smdkv310 so cannot be
removed unless we remove those boards.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
2019-02-09 12:50:22 -07:00
Simon Glass
f656daea64 spring: Update flashmap details
Update the flashmap so that this board can be started over USB A-A. It
is slightly different from snow.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-02-09 12:50:22 -07:00
Simon Glass
8d135f5c6f spring: Update sound to use max98088 codec
Update the spring settings to use this codec, which is what it actually
shipped with.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-02-09 12:50:22 -07:00
Simon Glass
e2932310a5 exynos: Convert to use CONFIG_BLK
Move all exynos boards over to use CONFIG_BLK.

This converts s5p_goni also, but adding dummy functions for pinmux and
peripheral ID. This will not function correctly, but gives the maintainer
more time to convert the board if desired.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
2019-02-09 12:50:21 -07:00
Andreas Dannenberg
4a1fa524e9 arm: mach-k3: common: Clean up ATF image startup function
Perform some cosmetic cleanup of the ATF image startup function, namely
fixing a spelling mistake, capitalization of a few words, spacing, as
well aligning how errors are printed and as using panic() for cases that
were using a combination of printf() + hang().

Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-02-09 07:51:02 -05:00
Philippe Reynes
2f4a686f21 dt: bcm63158: add watchdog
This commit add watchdog and sysreset watchdog
in the bcm63158 device tree.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-02-09 07:51:00 -05:00
Philippe Reynes
be2fc084d9 bcm963158: add initial support
This add the initial support of the broadcom reference
board bcm963158 with a bcm63158 SoC.

This board has 1 GB of ram, 512 MB of flash (nand),
2 usb port, 1 uart, 4 ethernet ports (LAN), 1 ethernet port (WAN).

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-02-09 07:50:59 -05:00
Philippe Reynes
ea1a7de532 bcm63158: add initial support
This add the initial support of the broadcom bcm63158 SoC family,
only the cpu, dram and uart are supported.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-02-09 07:50:59 -05:00
Patrick Delaunay
e74b74c528 dts: stm32mp1: clock tree update
- Add st,digbypass on clk_hse node (needed for board rev.C)
- MLAHB/AHB max frequency increased from 200 to 209MHz, with:
  - PLL3P set to 208.8MHz for MCU sub-system
  - PLL3Q set to 24.57MHz for 48kHz SAI/SPI2S
  - PLL3R set to 11.29MHz for 44.1kHz SAI/SPI2S
  - PLL4P set to 99MHz for SDMMC and SPDIFRX
  - PLL4Q set to 74.25MHz for EVAL board

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-02-09 07:50:57 -05:00
Philippe Reynes
8d6006f2ac dt: bcm6858: add watchdog
This commit add watchdog and sysreset watchdog
in the bcm6858 device tree.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-02-09 07:50:50 -05:00
Philippe Reynes
0900036561 dt: bcm6838: add watchdog
This commit add watchdog and sysreset watchdog
in the bcm6838 device tree.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-02-09 07:50:50 -05:00
Tom Rini
50e24381c0 Merge branch 'master' of git://git.denx.de/u-boot-spi
- SPI-NOR support
2019-02-07 14:48:56 -05:00
Vignesh R
6d82517836 configs: Don't use SPI_FLASH_BAR as default
Now that new SPI NOR layer uses stateless 4 byte opcodes by default,
don't enable SPI_FLASH_BAR. For SPI controllers that cannot support
4-byte addressing, (stm32_qspi.c, fsl_qspi.c, mtk_qspi.c, ich.c,
renesas_rpc_spi.c) add an imply clause to enable SPI_FLASH_BAR so as to
not break functionality.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Tested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Tested-by: Stefan Roese <sr@denx.de>
Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com> #zynq-microzed
2019-02-07 15:33:22 +05:30
Vignesh R
ce13c19f4c sh: bitops: add hweight*() macros
Add hweight*() macros required for moving to new SF layer

Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2019-02-07 15:33:21 +05:30
Hannes Schmelzer
4dfe43849a arm: dts: am33xx: introduce 'am33xx-u-boot.dtsi'
commit fdce9d35dc ("arm: dts: am33xx: Sync dts with Linux 4.20.0")
did remove the "u-boot,dm-spl" flag from the 'ocp' bus which was
introduced with
commit 19aa4ac09d ("dts: am33xx: add u-boot, dm-spl to ocp bus")

Due to this all boards having CONFIG_SPL_OF_CONTROL enabled are broken
because they cannot bind/probe the boot-media interface during SPL
stage.

This commit introduces the 'am33xx-u-boot.dtsi' which is included with
the auto include mechanism. The am33xx-u-boot-dtsi adds the important
"u-boot,dm-pre-reloc" to the 'ocp bus' (the root bus of almost all
peripherals, at least the bootable ones).

The peripherials (mmc, spi, ...) needed during SPL stage need to be
equipped with the 'u-boot,dm-pre-reloc' in their responsible dts file.

Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2019-02-06 14:07:23 -05:00
Stefan Roese
f182209190 arm: mvebu: theadorable: Enable video / LCD support with the new DM driver
With the new DM_VIDEO support in the Armada XP LCD driver, this patch
adds the needed DT node for the LCD controller to the theadorable dts
file. This DT property is not added to the Armada XP dtsi files, as this
LCD feature is pretty unusual for this SoC and I personally know of no
other board that uses this controller.

This patch also enables CONFIG_BMP_16BPP/24BPP/32BPP, as the "old" bmp
command supported these BMP files.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Acked-by: Anatolij Gustschin <agust@denx.de>
2019-02-05 14:23:27 +01:00
Stefan Roese
6d9a98c583 video: Armada XP: Move driver to DM_VIDEO
This patch moves the Armada XP video / LCD driver to DM_VIDEO. With this
move, the legacy interface board_video_init() is removed from the
theadorable board code (only user of this video driver). The support
via DT will be added in a separate patch.

This patch also enables DM_VIDEO for the theadorable board, as this is
needed to not break git bisect'ability.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Acked-by: Anatolij Gustschin <agust@denx.de>
2019-02-05 14:23:21 +01:00
Vladimir Vid
32c9e1c269 arm64: mvebu: Add basic support for uDPU board
This adds initial support for micro-DPU (uDPU) board which is based on Armada-3720 SoC.
micro-DPU is the single-port FTTdp "distribution point unit" made by Methode Electronics
which offers complete modularity with replaceable SFP modules both for uplink and downlink
(G.hn over twisted-pair, G.hn over coax, 1G and 2.5G Ethernet over Cat-5e cable).

On-board features:
- 512 MiB DDR3
- 2 x 2.5G SFP via HSGMII SERDES interface to the A3720 SoC
- USB 2.0 Type-C connector
- 4GB eMMC
- ETSI TS 101548 reverse powering via twisted pair (RJ45) or coax (F Type)

Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Luis Torres <luis.torres@methode.com>
Cc: Scott Roberts <scott.roberts@telus.com>
Cc: Paul Arola <paul.arola@telus.com>
Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2019-02-05 14:23:06 +01:00
Stefan Roese
9b276e90d6 arm: mvebu: armada-xp-theadorable.dts: Enable PCIe DT nodes
Now that the PCIe driver supports DM and DT parsing, enable the PCIe DT
nodes that are used by this board.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Dirk Eibach <dirk.eibach@gdsys.cc>
Cc: Mario Six <mario.six@gdsys.cc>
Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Cc: Phil Sutter <phil@nwl.cc>
Cc: Marek Behún <marek.behun@nic.cz>
Cc: VlaoMao <vlaomao@gmail.com>
2019-02-05 14:22:56 +01:00
Stefan Roese
6f139becf6 arm: mvebu: armada-xp/37x.dtsi: Sync PCIe DT nodes with Linux v4.20
This patch sync's the PCIe DT nodes with the recent Linux v4.20 version.
This change makes it easier to reference specific PCIe nodes in the
board dts files to e.g. enable a PCIe port as this is now necessary with
the new DM PCI driver for these platforms.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Dirk Eibach <dirk.eibach@gdsys.cc>
Cc: Mario Six <mario.six@gdsys.cc>
Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Cc: Phil Sutter <phil@nwl.cc>
Cc: Marek Behún <marek.behun@nic.cz>
Cc: VlaoMao <vlaomao@gmail.com>
Cc: Tom Rini <trini@konsulko.com>
2019-02-05 14:22:49 +01:00
Tom Rini
e5fd39c886 u-boot-rockchip changes for 2019.04-rc1:
* support for Chromebook Bob
   * full pinctrl driver using DTS properties
   * documentation improvements
   * I2S support for some Rockchip SoCs
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJcVG0IAAoJECaAFcEOcohNKVAIAJd3DN/qudcVQdkuvAGK6WIk
 Umxkm6rxHwur7oU+wxvK1p1l/0YTFBeCfo15quH1DkSc/WIUnmBlLmDvqpGVmPmh
 ydZNE9ZChn0OKRIaM6pKJr+3p155cQDe6Mgg2j/5CnNx28KxT+vu7EqZbZvbQPag
 wcZEK6Z6E5jMVHVn2lbLgmsBPmY7ksX168IqpvzTxIj0a4J3n0DcJUnO4RBBS0Q2
 PGEvFhTvigVWs6r6GL0gLn3VwnQX30xQlIuKKORPcdhjk97cJcS4+bRxdTENTKD9
 j3+pgyl1n04O8sPONZS7pH3fvJwtC6SwnoxTYxGrvjedw1LxbyHG3cqcGDg/TJ8=
 =ik3X
 -----END PGP SIGNATURE-----

Merge tag 'for-master-20190201' of git://git.denx.de/u-boot-rockchip

u-boot-rockchip changes for 2019.04-rc1:
  * support for Chromebook Bob
  * full pinctrl driver using DTS properties
  * documentation improvements
  * I2S support for some Rockchip SoCs
2019-02-02 10:11:20 -05:00
Tom Rini
544d5e98f3 - MIPS: mscc: jr2: small fixes
- MIPS: mscc: luton: add ethernet and switch driver
 - MIPS: mt76xx: fix timer frequency
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiQkHUH+J02LLC9InKPlOlyTyXBgFAlxURx8ACgkQKPlOlyTy
 XBjZWg//eo8rdWidwogApEUcwHqr6jGHrm5RwAaqJpNqLX5sLunNbNtzzNFvNL2o
 quU+8zjnUBgxWnPo/Aasx8cYh7nzW2cahyqsrUXeKjJmGualWMSR93iFmtIBXdmR
 WJg6erbJw6N9LUNA50/SPfSR6DqayvgQnt8kB/GKg5ASpZEfc2o7zzd0HFS3dFY2
 WU4irUY2INbjP3k9Qa+PIm8rOq52z/OqfQ3tX6SuoC1LOaYQJsyrYDmzxmqP4HV2
 JarsOqy1d8II3hsvTKJIypBeyRiln7rtSz0nPyQcUG4VRw9AOtMfnTY93gr0Ruzt
 UMVNnhJr78NzHly7ukqqmFBsQMq+gXbDDq6GbjPEfGcvy7AiprJYjokJ28JwraOi
 yfnwonJQU/k0E5PBX9f4AtkbDOedd/RWPRfQaUmTdGzxoCX/YvrOAe+yqWTov8To
 y5mnhx9QwIC8cxHgjaS7+xAXkcumA4xwG3g7wGntUqMuPmIiJObtZT4umEpLjW4d
 zL5wVmdRIALcTdfHS97T1QpDuJcVjFre98bfRGweXurX/ngQIEbh4e82JojW2CDN
 jAw/tVHkXcKBPoGE/hHEx0K4ScxjdswCXMeqKWjqHotvF+V6Mwnq8frecjgVEUGM
 E/bfSlzAVllfuug7wWccq69pvyQkn7YHg8HDuNwy3gdBCxZFY8c=
 =qCAc
 -----END PGP SIGNATURE-----

Merge tag 'mips-pull-2019-02-01' of git://git.denx.de/u-boot-mips

- MIPS: mscc: jr2: small fixes
- MIPS: mscc: luton: add ethernet and switch driver
- MIPS: mt76xx: fix timer frequency
2019-02-02 10:11:12 -05:00
Jagan Teki
dc146ca111 Kconfig: Migrate CONFIG_BUILD_TARGET
Migrate CONFIG_BUILD_TARGET into Kconfig.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-02-02 08:23:57 -05:00
Philipp Tomsich
73ced87e9a rockchip: rk3399: spl: ensure that debug_uart_init is called
With the latest changes to add support for the Chromebook Bob,
initialisation through debug_uart_init() did no longer get called for
other targets.

Fix this, by moving debug_uart_init() out of the Bob-specific

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-02-01 16:59:14 +01:00
Simon Glass
9e92116bc8 rockchip: Add support for chromebook_bob
Bob is a 10-inch chromebook produced by Asus. It has two USB 3.0 type-C
ports, 4GB of SDRAM, WiFi and a 1280x800 display. It uses its USB ports
for both power and external display. It includes a Chrome OS EC
(Cortex-M3) to provide access to the keyboard and battery functions.

Support so far includes only:
- UART
- SDRAM
- MMC, SD card
- Cros EC (but not keyboard)

Not included:
- Keyboard
- Display
- Sound
- USB
- TPM

Bob is quite similar to Kevin, the Samsung Chromebook Plus, but support
for this is not provided in this series.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-02-01 16:59:13 +01:00
Simon Glass
08c85b57a5 rockchip: gru: Add extra device-tree settings
Add some U-Boot-specific settings. These should really go in the
*u-boot.dtsi file, but it seems that rk3399 does not use that yet.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-02-01 16:59:13 +01:00
Simon Glass
aa48c94ca8 rockchip: Implement spl_gpio in the GPIO driver
Allow rockchip boards to use GPIOs before driver model is ready. This is
really only useful for setting GPIOs to enable the early debug console, if
needed on some platforms.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-02-01 16:59:13 +01:00
Simon Glass
3ec6f11c7d rockchip: Move pull-up/down enum into a common file
At present this enum is only available to rk3288. Move it so that other
rockchip SoCs can access it. It is needed for the SPL GPIO driver for
rk3999 in a later patch.

Also adjust the enum name to lower case.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-02-01 16:59:13 +01:00
Simon Glass
c35f8e5017 rockchip: Tidy up board include-file ordering
These board files have inconsistent #include ordering. Fix them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-02-01 16:59:13 +01:00
Simon Glass
cf5c8d1880 rockchip: Add settings for Samsung LPDDR3 4GB SDRAM 1866MHz
This memory is used on Bob. Add settings for this, taken from coreboot.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-02-01 16:59:13 +01:00
Simon Glass
3523c07867 rockchip: Allow booting from SPI
The u-boot,spl-boot-device property only allows MMC at present. Add SPI as
well for boards that boot from SPI flash.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-02-01 16:59:13 +01:00
Simon Glass
0a09f2f117 rockchip: Adjust rk3399 device tree to be closer to linux
This file has changed upstream, with some additions and changes. Move the
U-Boot version towards this.

Some USB changes seem to be incompatible with how the bindings work on
rockchip in U-Boot. Testing is needed to make sure that USB still works
correct, and adjust the code (not device tree) if not.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-02-01 16:59:12 +01:00
Simon Glass
d244474f38 rockchip: Bring in device tree files for rk3399-gru
Bring in these files from Linux v4.20.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-02-01 16:59:12 +01:00
David Wu
e5b29d870b ARM: dts: rk322x: Correct the uart2 default pin configuration
To match the iomux setting of uart2 at SPL, correct the uart2
default pin configuration, if not changed, the evb-rk3229 can't
output the log message.

Signed-off-by: David Wu <david.wu@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-02-01 16:59:11 +01:00
David Wu
08c817c399 ARM: rockchip: Remove the pinctrl request at rk3288-board-spl
If we use the new pinctrl driver, the pinctrl setup will be done
by device probe. Remove the pinctrl setup at rk3288-board-spl.

Signed-off-by: David Wu <david.wu@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-02-01 16:59:11 +01:00
David Wu
bfb11abef2 ARM: rockchip: Kconfig: Remove the SPL_PINCTRL for rk3188
It seems that pinctrl is not requested for rk3188 SPL, remove it so
that can save more space for SPL image size.

Signed-off-by: David Wu <david.wu@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-02-01 16:59:11 +01:00
David Wu
c0b163e908 ARM: rockchip: rk3188: Remove the pinctrl setup and enable uart at SPL
When the boot ROM sets up MMC we don't need to do it again. Remove the
MMC setup code entirely, but we also need to enable uart for debug message.

Signed-off-by: David Wu <david.wu@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-02-01 16:59:11 +01:00
Marty E. Plummer
8e2e601c5f rockchip: add support for veyron-speedy (ASUS Chromebook C201)
This adds support for the ASUS C201, a RK3288-based clamshell
device. The device tree comes from linus's linux tree at
3f16503b7d2274ac8cbab11163047ac0b4c66cfe. The SDRAM parameters
are for 4GB Samsung LPDDR3, decoded from coreboot's
src/mainboard/google/veyron/sdram_inf/sdram-lpddr3-samsung-4GB.inc

Signed-off-by: Marty E. Plummer <hanetzer@startmail.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-02-01 16:59:10 +01:00
Mark Kettenis
09056c94a1 rockchip: dts: rk3399-firely: add 'same-as-spl'
Like on rk3399-puma we want to continue booting the fill U-Boot from
the same device as the SPL stage.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-02-01 16:59:10 +01:00
Simon Glass
0d968ceb1f rockchip: Drop call to rockchip_dnl_mode_check() for now
This function causes a 5-second delay and stops the display working on
minnie. This code should be in a driver and should only be enabled by
a device-tree property, so that it does not affect devices which do not
have this feature.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-02-01 16:59:10 +01:00
Simon Glass
2d0c01b8f0 sound: rockchip: Add sound support for jerry
Jerry uses a max98090 audio codec and the internal SoC I2S peripheral.
Enable sound support and add the required device-tree pieces.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-02-01 16:59:10 +01:00
Simon Glass
3dbfe5ae61 rockchip: rk3288: Add i2s pinctrl and clock support
Add support for setting pinctrl and clock for I2S on rk3288. This allows
the sound driver to operate. These settings were created by rkmux.py

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-02-01 16:59:10 +01:00
Jean-Jacques Hiblot
341e5a2752 ARM: DTS: am43xx: Enable the DTS entries for USB port #2 in SPL
This is required to enable the USB port #2 in SPL when DM_USB is used.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-02-01 09:14:21 -05:00
Jean-Jacques Hiblot
64c59926ad ARM: DTS: am43xx: Add aliases for the USB ports
Although not required, it doesn't hurt to explicitly map the USB ports to
a USB controller. Without this, the port number will be derived from the
binding order of the peripheral devices.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-02-01 09:14:21 -05:00
Adam Ford
dd5b0e229b ARM: DTS: Resync am3517-evm.dts with Linux 5.0-rc3
The chosen node was added in the kernel.  This may come in handy
in the future, so resync with 5.0-rc3

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-02-01 09:14:21 -05:00
Adam Ford
13756ebb98 ARM: dts: da850-evm: Re-sync with Kernel 5.0
Resync with Kernel 5.0-rc3

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-02-01 09:14:21 -05:00
Tien Fong Chee
f4b4092474 spl: Kconfig: Replace CONFIG_SPL_EXT_SUPPORT to CONFIG_SPL_FS_EXT4
Replace CONFIG_SPL_EXT_SUPPORT to CONFIG_SPLY_FS_EXT4 so both
obj-$(CONFIG_$(SPL_)FS_EXT4) and CONFIG_IS_ENABLED(FS_EXT4) can be
used to control the build in both SPL and U-Boot.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-02-01 09:14:21 -05:00
Tien Fong Chee
0c3a9ed409 spl: Kconfig: Replace CONFIG_SPL_FAT_SUPPORT with CONFIG_SPL_FS_FAT
Replace CONFIG_SPL_FAT_SUPPORT with CONFIG_SPL_FS_FAT so
obj-$(CONFIG_$(SPL_)FS_FAT) can be used to control the build in both
SPL and U-Boot.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-02-01 09:12:48 -05:00
Jean-Jacques Hiblot
db34e0ede0 ARM: DTS: am335x-evm: Use USB0 in peripheral mode
This USB port is mainly used for RNDIS and DFU. To be able to use it with
DM_USB and DM_USB_GADGET, we need to provide a dr_mode value in the DTS.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-02-01 09:09:40 -05:00
Heiko Schocher
46c43714a9 ARM: dts: am335x-shc: add u-boot specific dtsi
add u-boot specific am335x-shc-u-boot.dtsi file,
in which we add u-boot specific adaptions.

Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-02-01 09:09:40 -05:00
Heiko Schocher
e535014580 arm: dts: add am335x-shc.dts for shc board
add DTS from linux tree commit
"47bfa6d9dc8c060bf56554a465c9031e286d2f80"

change for U-Boot:
switch to SPDX-license identifier.

Signed-off-by: Heiko Schocher <hs@denx.de>
2019-02-01 09:09:40 -05:00
Horatiu Vultur
ee7b65f2cc mips: mscc: luton: Add ethernet nodes for Luton.
Add nodes for pcb090 and pcb091. There is currently no support
in Linux for this SoC.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-02-01 14:13:36 +01:00
Tom Rini
db4a29993d - ihs and imx driver fixes
- relax EDID validation checks for 0 hsync/vsync
   pulse width (support some quirky displays)
 -----BEGIN PGP SIGNATURE-----
 
 iGwEABECACwWIQSC4hxrSoIUVfFO0kRM6ATMmsalXAUCXFLpkQ4cYWd1c3RAZGVu
 eC5kZQAKCRBM6ATMmsalXLiRAJ9F4WRPFtzn/S77OinRZl2e5isCJACaA/t8hmx2
 M81piE8xdryxVKIHFJc=
 =ocAC
 -----END PGP SIGNATURE-----

Merge tag 'video-updates-for-2019.04-rc1' of git://git.denx.de/u-boot-video

- ihs and imx driver fixes
- relax EDID validation checks for 0 hsync/vsync
  pulse width (support some quirky displays)
2019-01-31 16:07:37 -05:00
Maxime Jourdan
0cc53faf59 arm: meson: board-gx: Setup VPU in fdt
If VIDEO_MESON is enabled, we need to setup the fdt for the framebuffer.

Call meson_vpu_rsv_fb() which reserves the framebuffer memory region for
EFI, and sets up simple-framebuffer nodes if simplefb support is
enabled.

Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
2019-01-31 09:35:01 +01:00
Maxime Jourdan
2ebade0d57 arm64: dts: meson-gx: add hhi reg entry to hdmi_tx
There's no reliable way to reuse the hhi entry from the vpu as is done
in the linux kernel, so we duplicate it here.

We will be able to sync against kernel DTS in the future when the VPU
gets based on the clock framework rather than the HHI reg.

Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-01-31 09:35:01 +01:00
Neil Armstrong
bce59f918e arm64: dts: meson-gx: Add hdmi_5v regulator as hdmi tx supply
The hdmi_5v regulator must be enabled to provide power to the physical HDMI
PHY and enables the HDMI 5V presence loopback for the monitor.

Fixes: b409f625a6d5 ("ARM64: dts: meson-gx: Add HDMI_5V regulator on selected boards")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
[backport of linux commit e1f2163deac059ad39f07aba9e314ebe605d5a7a]
2019-01-31 09:35:01 +01:00
Maxime Jourdan
671b1db8f8 arm64: dts: meson-gx: vpu should be probed before relocation
Flag the appropriate nodes with u-boot,dm-pre-reloc

Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-01-31 09:35:01 +01:00
Neil Armstrong
3bed422094 video: Add Meson Video Processing Unit Driver
This adds video output support for Amlogic GXBB/GXL/GXM chips.
The supported ports are CVBS and HDMI (based on DW_HDMI).

When using HDMI, only DMT modes are supported.

There is support for simple-framebuffer (CONFIG_VIDEO_DT_SIMPLEFB)

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jorge Ramire-Ortiz <jramirez@baylibre.com>
Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
[narmstrong: fixed defines alignment in meson_canvas.c]
Reviewed-by: Anatolij Gustschin <agust@denx.de>
2019-01-31 09:35:01 +01:00
Tom Rini
552452f80c Merge branch 'master' of git://git.denx.de/u-boot-sunxi
- Enable DM_MMC support
2019-01-30 12:24:32 -05:00
Jagan Teki
a7cca57937 arm: sunxi: Enable DM_MMC
Enable DM_MMC for all Allwinner SoCs, this will eventually
enable BLK.

Also removed DM_MMC enablement in few parts of sunxi
configurations.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2019-01-30 18:22:18 +05:30
Jagan Teki
cebeba9fdf sunxi: A64: pinebook-u-boot: Include sunxi-u-boot.dtsi
Like other Allwinner A64 boards, pinebook also need altering
auto-numbering of mmc2 to mmc1 which is available in common
sunxi dsti file, sunxi-u-boot.dtsi

Pinebook has a separate sun50i-a64-pinebook-u-boot.dtsi which
takes more precedence for u-boot.dtsi inclusion and it eventually
failed to include the sunxi-u-boot.dtsi.

So, this patch add support to include the sunxi-u-boot.dtsi in the
sun50i-a64-pinebook-u-boot.dtsi

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Vasily Khoruzhick <anarsoul@gmail.com> # Pinebook
2019-01-30 18:22:18 +05:30
Jagan Teki
708b5da38a arm: dts: sunxi: Alter mmc2 auto-numbering to mmc1
Environment and fastboot mmc devices are configured based on the number
of mmc slots defined on particular board configs, MMC_SUNXI_SLOT_EXTRA.

If MMC_SUNXI_SLOT_EXTRA is more than 1, the default env and fastboot
mmc devices is mmc1 by assuming mmc0 is SD and mmc1 is emmc device.

But with DM_MMC the mmc devices are numbered as per the dts node
enablement. If there is a chance of having enabling all mmc nodes
in dts say mmc0, mmc1, mmc2 then the default env and fastboot devices
will failed to assign proper emmc device since mmc2 is emmc in most
of the Allwinner platforms.

So, we need to alter the auto-numbering by aliasing mmc2 to mmc1 since
aliases take precedence over auto-numbering.

If the dts enables mmc0, mmc1, mmc2, then all the nodes will probe
sequentially and auto-numbered as it is. but when aliases mmc1 with mmc2
the resulting number should be that mmc0 is till mmc0, mmc2 become mmc1
and mmc2 become mmc1

Without aliases of mmc1 = &mmc2;
-------------------------------
MMC:   mmc@1c0f000: 0, mmc@1c10000: 1, mmc@1c11000: 2

With aliases of mmc1 = &mmc2;
----------------------------
MMC:   Device 'mmc@1c11000': seq 1 is in use by 'mmc@1c10000'
mmc@1c0f000: 0, mmc@1c10000: 2, mmc@1c11000: 1
Loading Environment from FAT... OK

Some platforms like A20 has mmc0...mmc3, but there is no usecases now
for enabling all mmc controllers in any of A20 board dts files.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-01-30 18:22:18 +05:30
Tom Rini
748ad078ee For 2019.04
-----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAlxQnKQPHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et3Mm8L/0P99AB62Pu0NbAaVI9PnqaeR9/kUIvHlaPT
 RMuUIz931/1GDnugGsEEquSMUt69lfBCKYbF4sKiWObytHfYKvB/u638gqG2IoEt
 KcnWU5dagaTOyoyPOtr8EyKxThJtG2j1uN+fA5BCZ6A6CLnEW0biJXYLwN5P/DIE
 bsn9R+XfOV/ppaFh3p65SZfzzwKh6eUQLHqEphBbbAHCPz74QSeZMHkumbKplGOk
 1cjuFi8bekFnPGDDPW8jRvUNlhRD0kTjXoBj1eF2Q1g8lUj6La8yOsq1DAeGJjd1
 ywUDi8GPNYQ7HuHNzfZETWAYspNflARnPQwMemmNSKmmu6CO8aB6lt3JZWEUrnjL
 1D8LzMrRpyq1jEA0a57qsvTc8i3KA7X3FHTszP0flhiLKgBgE+5t1w8dc0wxC7HZ
 eF9TE3tGAmVzRVZwBh8HIDuKhe+y3uGKtvxl80DF8vQQWrXHq0GSC+pmdEXk7DGU
 OGYvdvVoThglZwM4vqeKlT/+1KLPCQ==
 =dOOt
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20190129' of git://git.denx.de/u-boot-imx

For 2019.04
2019-01-30 07:22:12 -05:00
Patrick Delaunay
1b35c90836 arm: stm32mp1: deploy spl in root folder
Update generation of spl binaries
- continue to generate all SPL files in spl sub-directory
- copy in root folder the needed file for user (YOCTO, buildroot):
  u-boot-spl.stm32

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-01-29 09:41:37 -05:00
Ye Li
3fd39937b1 imx: video: Fix return value issue
When framebuffer driver init is failed, we should return the err value not 0.
So the video init can exit immediately.

Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-01-28 21:13:33 +01:00
Adam Ford
b64b5ad115 ARM: DTS: imx6q-logicpd: Update DTS/DTSI files
The i.MX6 SOM and development kits have undergone significant
updates and changes over the past few months.  This re-sync's
the U-Boot with Logic PD's BSP.

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-01-28 21:09:44 +01:00
Bryan O'Donoghue
e4d8dac4bb arm: dts: imx7s-warp: Create alias for mmc0 to &usdhc3
This patch sets up an alias for mmc0 to usdhc3.

Before the DM conversion only usdhc3 was enabled and therefore it appeared
as MMC 0 to u-boot. After enabling MMC DM though usdhc3 defaults to MMC 2,
which left unattended would drive changes to existing warp7 bootscripts and
environment variables that rely on mmc 0.

Setup the alias of mmc0 and usdhc3 so that existing warp7 boot code will
work unmodified.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2019-01-28 20:55:46 +01:00
Bryan O'Donoghue
e6f7c58dfe arm: dts: imx7s-warp: Import Linux warp7 dts
This patch imports the Linux kernel warp7 dts as at upstream kernel commit
cf76c364a1e1.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2019-01-28 20:55:46 +01:00
Bryan O'Donoghue
8bdb575b0e arm: dts: imx7: Correct spelling mistake in GPIO name
As pointed out by Lucas WDOD1_WDOG_ANY should be WDOG1_WDOG_ANY. Once
corrected we can import the latest kernel DTS unmodified.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reported-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
2019-01-28 20:55:46 +01:00
Peng Fan
9382f73bb0 imx8: cpu: restrict checking ROM passover info for revA
Passover info only for revA.

move get_cpu_rev out of CONFIG_CPU to avoid build failure when using
get_cpu_rev in SPL.
Add a CONFIG_SPL_BUILD for passover usage, no need to execute it again
in normal U-Boot stage. Also if still checking passover info in normal
U-Boot stage, need to make the passover code executed after
arch_cpu_init_dm.
So to make it easy and clean, only execute the code for SPL stage.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-28 20:55:46 +01:00
Ye Li
d8bbf362f3 imx: Check the PL310 version for applying errata
Apply errata based on PL310 version instead of compile
time. Also set Prefetch offset to 15, since it improves
memcpy performance by 35%. Don't enable Incr double
Linefill enable since it adversely affects memcpy
performance by about 32MB/s and reads by 90MB/s. Tested
with 4K to 16MB sized src and dst aligned buffer.

Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
2019-01-28 20:55:46 +01:00
Lukasz Majewski
56ac8104e3 ARM: imx: fix: Provide correct enum values for ONENAND/NOR boot recognition
According to "Table 5-1. Boot Device Select" (page 335,
i.MX 6Dual/6Quad Applications Processor Reference Manual, Rev. 4, 09/2017)
the BOOT_CFG1[3] have following values (regarding EIM booting):
0 - NOR flash and 1 - ONENAND

This commit provides correct identification of the boot medium for IMX6Q
boards booting from NOR memory (MCCMON6 is one of them).

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-01-28 20:55:46 +01:00
Patrick Bruenn
7e04b4c751 dm: arm: imx: migrate cx9020 to CONFIG_DM_MMC
Enable esdhc1/2 device nodes for cx9020 and build with CONFIG_DM_MMC=y

Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
2019-01-28 20:55:46 +01:00
Patrick Bruenn
77fd72ff8f arm: imx: Add esdhc1/2 nodes to imx53.dtsi
These nodes are required by CX9020 when build with CONFIG_DM_MMC=y
They are copied from Linux 4.20

Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
2019-01-28 20:55:46 +01:00
Ye Li
528915c717 imx: Fix potential lmb memory overwritten by stack
At default, u-boot reserves the memory from SP - 4KB to DRAM end for
lmb in arch_lmb_reserve. So lmb won't allocate any memory from it.
But we found the 4K gap for SP is not enough now, because some FDT
updating operations are added in our u-boot before jumping to kernel,
which needs larger stack. This causes the lmb allocated memory is overwritten
by stack.

Fix the issue by implementing the board_lmb_reserve to reserve from
SP - 16KB to memory end for lmb.

Signed-off-by: Ye Li <ye.li@nxp.com>
2019-01-28 20:35:47 +01:00
Peng Fan
caceb739ea imx: build flash.bin for i.MX8
Build flash.bin for i.MX8 when SPL enabled.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-28 20:35:47 +01:00
Peng Fan
b184a796a0 imx: mkimage_fit_atf: introduce BL33_BASE_ADDR
Introduce BL33_BASE_ADDR, then we could reuse this script for i.MX8QXP.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-28 20:35:47 +01:00
Peng Fan
8e0d963b19 dts: imx8qxp-mek: introduce u-boot dtsi
Introduce u-boot dtsi for i.MX8QXP MEK board.
we do not introduce a common dtsi for SoC, because different board
has different requirement on which needs to be enabled in SPL DM.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-28 20:35:47 +01:00
Peng Fan
f541796af9 spl: imx8: add spl boot device
Add spl_boot_device for i.MX8, also add BOOT_DEVICE_MMC2_2 for
spl_boot_mode.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-28 20:35:47 +01:00
Peng Fan
c1e0940f7c arm: imx: build mach-imx for i.MX8
To enable SPL for i.MX8, we could reuse code in arch/arm/mach-imx.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-28 20:35:47 +01:00
Peng Fan
04b249656e imx8: scu: use dedicated MU for SPL
SPL runs in EL3 mode, except MU0_A, others are not powered on,
and could not be used. However normal U-Boot use MU1_A, so we
could not reuse the one in dts. And we could not replace the one
in dts with MU0_A, because MU0_A is reserved in secure world.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-28 20:35:47 +01:00
Peng Fan
3bd888b55e imx8qxp: add SUPPORT_SPL option
Enable SUPPORT_SPL option for i.MX8QXP, then we could enable SPL.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-28 20:35:47 +01:00
Stefan Agner
b6fd4fccb4 arm: dts: imx7: colibri: add usdhci peripherals to device tree
Add usdhci peripherals to device tree. This allows to use DM_MMC
for Colibri iMX7 devices.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2019-01-28 13:02:08 +01:00
Stefan Agner
d8a32f52a6 arm: dts: imx7: colibri: split dt for raw NAND and eMMC devices
In preparation of adding CONFIG_DM_MMC support use separate device
trees for raw NAND and eMMC devices.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-01-28 13:02:08 +01:00
Fabio Estevam
bab289cbe9 mx7: Do not call lcdif_power_down() in the SPL case
Like it was done on imx6 in commit 9236269de5 ("imx: mx6: Fix
implementantion reset_misc")

Do not call lcdif_power_down() in the SPL case to fix the following
build error:

  LD      spl/u-boot-spl
  MKIMAGE u-boot.img
arch/arm/mach-imx/built-in.o: In function `reset_misc':
/home/fabio/ossystems/u-boot/arch/arm/mach-imx/mx7/soc.c:372: undefined reference to `lcdif_power_down'
scripts/Makefile.spl:375: recipe for target 'spl/u-boot-spl' failed

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-01-28 12:53:21 +01:00
Martyn Welch
0963060c99 imx: Add PHYTEC phyBOARD-i.MX6UL-Segin
Port for the PHYTEC phyBOARD-i.MX6UL-Segin single board computer. Based on
the PHYTEC phyCORE-i.MX6UL SOM (PCL063).

CPU:   Freescale i.MX6UL rev1.2 528 MHz (running at 396 MHz)
CPU:   Industrial temperature grade (-40C to 105C) at 44C
Reset cause: POR
Board: PHYTEC phyCORE-i.MX6UL
I2C:   ready
DRAM:  256 MiB
NAND:  512 MiB
MMC:   FSL_SDHC: 0
In:    serial
Out:   serial
Err:   serial
Net:   FEC0

Working:
 - Eth0
 - i2C
 - MMC/SD
 - NAND
 - UART (1 & 5)
 - USB (host & otg)

Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
2019-01-28 12:47:27 +01:00
Breno Matheus Lima
b2ca8907d9 imx: hab: Convert non-NULL IVT DCD pointer warning to an error
The following NXP application notes and manual recommend to ensure the
IVT DCD pointer is Null prior to calling HAB API authenticate_image()
function:

- AN12263: HABv4 RVT Guidelines and Recommendations
- AN4581: Secure Boot on i.MX50, i.MX53, i.MX 6 and i.MX7 Series using
  HABv4
- CST docs: High Assurance Boot Version 4 Application Programming
  Interface Reference Manual

Commit ca89df7dd4 ("imx: hab: Convert DCD non-NULL error to warning")
converted DCD non-NULL error to warning due to the lack of documentation
at the time of first patch submission. We have warned U-Boot users since
v2018.03, and it makes sense now to follow the NXP recommendation to
ensure the IVT DCD pointer is Null.

DCD commands should only be present in the initial boot image loaded by
the SoC ROM. Starting in HAB v4.3.7 the HAB code  will generate an error
if a DCD pointer is present in an image being authenticated by calling the
HAB RVT API. Older versions of HAB will process and run DCD if it is
present, and this could lead to an incorrect authentication boot flow.

Signed-off-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-01-28 12:45:45 +01:00
Tom Rini
2f41ade79e linker: Modify linker scripts to be more generic
Make use of "IMAGE_MAX_SIZE" and "IMAGE_TEXT_BASE" rather than
CONFIG_SPL_MAX_SIZE and CONFIG_SPL_TEXT_BASE.  This lets us re-use the
same script for both SPL and TPL.  Add logic to scripts/Makefile.spl to
pass in the right value when preprocessing the script.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Jagan Teki <jagan@openedev.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Andreas Bießmann <andreas@biessmann.org>
Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: York Sun <york.sun@nxp.com>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Adam Ford <aford173@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Tested-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Tested-by: Adam Ford <aford173@gmail.com> #da850evm & omap3_logic_somlv
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-01-26 22:55:53 -05:00
Tom Rini
b32ba6f12e rockchip: Add TPL_MAX_SIZE for RK3288
Per Kever Yang, 32768 is a reasonable max size for TPL on RK3288.

Cc: Kever Yang <kever.yang@rock-chips.com>
Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-01-26 22:55:53 -05:00
Tom Rini
a6d6812a21 PowerPC: Stop re-using CONFIG_SPL_TEXT_BASE for TPL
Rather than checking for CONFIG_TPL_BUILD and then re-defining
CONFIG_SPL_TEXT_BASE make use of CONFIG_TPL_TEXT_BASE directly.

Cc: York Sun <york.sun@nxp.com>
Cc: Po Liu <po.liu@nxp.com>
Cc: Qiang Zhao <qiang.zhao@nxp.com>
Cc: Timur Tabi <timur@tabi.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-01-26 22:55:53 -05:00
Tom Rini
0da9025508 Merge branch '2019-01-25-master-imports'
- snapdragon 820c improvements
- poplar updates
- DFU + SPL cleanups
- Improve the mediatek mmc driver
- Other minor cleanups / improvements
2019-01-26 22:47:55 -05:00
Andrew F. Davis
0fd1359c5a ARM: mach-omap2: Kconfig: Allow OMAP5 devices to set entry point
Like AM33xx and AM43xx, DRA7xx and AM57xx devices may need to
have an non-standard boot address in memory. This may be due
to the device being a high security variant, which place the
Initial SoftWare (ISW) after certificates and secure software.

Allow these devices to set this from Kconfig.

Signed-off-by: Andrew F. Davis <afd@ti.com>
2019-01-26 08:13:55 -05:00
Andrew F. Davis
6536ca4d66 spl: Kconfig: Drop the _SUPPORT postfix from SPL_DFU
The symbol CONFIG_SPL_DFU_SUPPORT in SPL build has the same
meaning as CONFIG_DFU in regular U-Boot. Drop the _SUPPORT
to allow for cleaner use in code.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Lukasz Majewski <lukma@denx.de>
2019-01-26 08:13:54 -05:00
Igor Opaniuk
246fb9dd9c arm64: dt: poplar: add optee node
As Poplar supports running TF-A with OP-TEE as BL32
payload, add op-tee node in DT, which enables usage of
OP-TEE driver (which provides an interface for requesting services
from OP-TEE).

Signed-off-by: Igor Opaniuk <igor.opaniuk@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-26 08:13:54 -05:00
Shawn Guo
7fa6d33684 poplar: clean up board level mmc initialization code
We have converted mmc to driver model on Poplar.  So let's clean up
board level mmc initialization code.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2019-01-25 12:12:57 -05:00
Shawn Guo
8eef803a27 poplar: sync up device tree with kernel 4.20
It adds missing pinctrl headers, updates clock header and sync up Poplar
device tree with kernel 4.20 release.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2019-01-25 12:12:56 -05:00
Ramon Fried
fbf4152ba6 dts: 820c: Add pinctrl node and uart mux
* Add pinctrl node for TLMM and add mux request for uart node.
* Rename uart to the actual board uart port.
* Fix indentendation of sdhc2 node.

Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2019-01-25 12:12:56 -05:00
Ramon Fried
ea7bf8fb08 arm: mach-snapdragon: pinctrl: clarify gpio disable bit
The TLMM_GPIO_ENABLE bit is actually use to disable
the GPIO. change it to TLMM_GPIO_DISABLE so it's clearer.

Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2019-01-25 12:12:56 -05:00
Ramon Fried
94268f1ab2 arm: mach-snapdragon: add pinctrl driver for db820c
Add pinctrl driver for Dragonboard820c, currently with only
one mux func to initialize pins for serial console.

Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2019-01-25 12:12:55 -05:00
Ramon Fried
604aa9d30b arm: mach-snapdragon: db820c: Actually init PLL for serial
The PLL for the UART was not set, and relied on previous
initializtion made by LK. add the appropriate initialization.

Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2019-01-25 12:12:55 -05:00
Sean Nyekjær
29e1a64c06 arm: stm32mp1: deploy spl in root folder
Deploy u-boot-spl.stm32 binary in u-boot root folder like
the rest of the boards.
This makes it more streamlined when building in Yocto, Buildroot etc..

Signed-off-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
2019-01-25 12:12:52 -05:00
Tom Rini
87f78478a4 Merge tag 'arc-fixes-for-2019.04-rc1' of git://git.denx.de/u-boot-arc
A couple of trivial fixes and improvements for ARC

Most notable are:
 * Move of ENV_SIZE/ENV_OFFSET to Kconfig
 * Fix with private structure allocation for arc_uart
 * Definition of CONFIG_SYS_CACHELINE_SIZE useful for building drivers
2019-01-25 10:41:24 -05:00
Alexey Brodkin
fae3798ac9 ARC: cache: define CONFIG_SYS_CACHELINE_SIZE as ARCH_DMA_MINALIGN
Even though we don't use CONFIG_SYS_CACHELINE_SIZE in ARC-specific code
it is used a lot in different drivers for alignment purposes.

So we define it and make much more drivers at least compilable for ARC.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2019-01-25 08:41:09 +03:00
Alexey Brodkin
7181a6d1cf ARC: Fix iteration in arc_xx_version()
"i" gets incremented before we're entering loop body
and effectively we iterate from 1 to 8 instead of 0 to 7.

This way we:
 a) Skip the first line of struct hs_versions
 b) Go over it and access memory beyond the structure

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2019-01-25 08:40:53 +03:00
Tom Rini
d01806a8fc Merge branch 'master' of git://git.denx.de/u-boot-sunxi 2019-01-24 15:30:48 -05:00
Tom Rini
0c3b301f79 mpc85xx config.mk: Add support for -msingle-pic-base
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEorkTmaQ1QAtDiYw67UVZlNoLnbQFAlxJ5dgACgkQ7UVZlNoL
 nbQU+A/+IVU5CQ3ROwxPhyP5VKLiyGgaQnTDfKS9J0V5VxrpsDFJp5Er+qJBNnCf
 xF4IGerQao/RY8klFFncoxfYyxYnCqOx09PUh8pPPCJDcLB3B/eFWTww2caQH26N
 obpS1xRGY65ZvAz69tMMC0ASPbcJ/jNOR+POtv7s82W7+74vmULcU3IeZTIJfvCY
 mJ4zFyUVGlnKMqk5JbHo9I+Pv7FWZpy9JscSeJMYtH9lAHt+4QQsKIrTXO78ukFw
 zOI6ZT0sS9ydbfMuhDqQBhrRcklDJUzOocNULXz9jKMD/ILZoiyA3DeOdKoUruFT
 G0y7F/63HVwd+iBGuKjbIDvf0YbZZm/+PRWaNecDnysnD2chLdZbWIEzOz7gnmgn
 AxG9/9gwTazLR47XiI0SF0MLSeWqLKn83+hep7lQxNte2gaK+CbY/jsg3c6EiP6O
 9uA11+jFpwsCSqzuWqjxAA0bVi+HS9LOdCFtTXZE5U46E9mSyBrYUFSNuY2qrlqx
 AVlFvplyzV/1/XRW9CRqGstgJ5U6UOYbU4GZDsdVN6TgCZstmchhXfanlYld1R+l
 cRfhnOYeOoWLtYSPeS4AukShonRfTnEI+0FdtGEKFFZifsJ+QKCBX1yLf7C1VZGz
 oqTIAYFNVDk95t2SDQGsw5B5IQMq++aDSatyepBvw3n+im6jRL0=
 =WL6c
 -----END PGP SIGNATURE-----

Merge tag 'mpc85xx-for-v2019.04-rc1' of git://git.denx.de/u-boot-mpc85xx

mpc85xx config.mk: Add support for -msingle-pic-base
2019-01-24 15:29:45 -05:00
Michal Simek
2e530511fa ARM: zynq: Remove unused GEM addresses
With DM in place there is no need to have GEM addresses in headers. None
is using them.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24 10:03:45 +01:00
Michal Simek
73d52b066a arm64: zynqmp: Remove unused GEM addresses
With DM in place there is no need to have GEM addresses in headers. None
is using them.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24 10:03:45 +01:00
Anton Gerasimov
8a2607020c zynq: Kconfig: extend the bootstrap malloc() pool
Most of the memory is being consumed by device binding code,
more space needed for other data structures.

Z-turn board has already hit the limit, others may follow soon.

Measuring only the memory consumed in device_bind_common, I've got
the following results (in decimal):

  root_driver:               108
  mod_exp_sw:                108
  amba:                      120
  serial@e0000000 aka uart0: 112
  serial@e0001000 aka uart1: 88
  spi@e000d000 aka qspi:     120
  sdhci@e0100000 aka mmc0:   455
  sdhci@e0100000.blk:        208
  slcr@f8000000:             96
  clkc@100:                  72
  (total)                    1487 = 0x5cf of 0x600

Signed-off-by: Anton Gerasimov <tossel@gmail.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24 10:03:45 +01:00
Mike Looijmans
5820590309 topic-miamiplus: Run CPU at 800MHz for speedgrade-2
The miamiplus contains a speedgrade-2 device, which may run the CPU at 800MHz.
Change the PLL setting to 800MHz, and adapt the setpoints in the devicetree.

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24 10:03:45 +01:00
Michal Simek
274ccb5b11 arm64: zynqmp: Move SoC sources to mach-zynqmp
Similar changes was done for Zynq in past and this patch just follow
this pattern to separate cpu code from SoC code.

Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/*
And also fix references to these files.

Based on
"ARM: zynq: move SoC sources to mach-zynq"
(sha1: 0107f24036)

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24 10:03:44 +01:00
Michal Simek
088f83ee3a arm64: zynqmp: Setup proper SPI dependency
Select DM_SPI/DM_SPI_FLASH for the whole SoC.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24 10:03:43 +01:00
Michal Simek
6f96fb508d ARM: zynqmp_r5: Setup DM_ETH/MMC if NET/MMC is enabled
Setup proper ETH/MMC dependency for the whole platform.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24 10:03:43 +01:00
Michal Simek
fb69310850 arm64: zynqmp: Setup DM_ETH/MMC if NET/MMC is enabled
Setup proper ETH/MMC dependency for the whole platform.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24 10:03:43 +01:00
Michal Simek
fa7971574c arm64: versal: Setup DM_ETH/MMC if NET/MMC is enabled
Setup proper ETH/MMC dependency for the whole platform.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24 10:03:43 +01:00
Siva Durga Prasad Paladugu
e7c9de6617 arm64: zynqmp: Fix mmc node names to be in sync with kernel
This patches renames sd nodes in dts to be in line with
kernel. This patch also modifies the references for the same
in code.
It checks mmc first to have no time penalty for new DT node names based
on left-to-right expression evaluation.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24 10:03:42 +01:00
Michal Simek
f11d4ab0b3 arm64: zynqmp: Do not protect zynqmp_pmufw_version()
There is hard dependency for CLK_ZYNQMP to have zynqmp_pmufw_version()
but also FPGA code is calling this function which is possible to use
without actual CLK_ZYNQMP firmware driver to be enabled.
This patch enables the case where only fixed-clock CLK setup is used.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24 10:03:42 +01:00
Joakim Tjernlund
45e81f9ab3 mpc85xx: Add support for -msingle-pic-base
-msingle-pic-base is a new gcc(from 4.6) option for ppc and
it reduces the size of my u-boot with about 4-5 KB.
While at it, add -fno-jump-tables too to save a
few more bytes.

e5500 core:
size u-boot.bef
   text	   data	    bss	    dec	    hex	filename
 473043	  23772	 307104	 803919	  c444f	u-boot.bef
size u-boot.aft
   text	   data	    bss	    dec	    hex	filename
 453195	  23772	 307104	 784071	  bf6c7	u-boot.aft

e500 core:
size u-boot.bef
   text	   data	    bss	    dec	    hex	filename
 292998	  17868	  24968	 335834	  51fda	u-boot.bef
size u-boot.aft
   text	   data	    bss	    dec	    hex	filename
 288002	  17868	  24968	 330838	  50c56	u-boot.aft

Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2019-01-23 10:48:48 -08:00
Horatiu Vultur
a834cb817f MSCC: Add board support for Serval SoC family.
Add board support and configuration for Jaguar2 SoC family.
The detection of the board type is based on the phy ids.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-01-23 18:28:09 +01:00
Horatiu Vultur
6621288838 MSCC: Add device tree for Serval pcb106 board
Add device tree based on evaluation board pcb106.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-23 18:28:09 +01:00
Horatiu Vultur
dda17e39c1 MSCC: add device tree for Serval pcb105 board
Add device tree based on evaluation board pcb105.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-23 18:28:09 +01:00
Horatiu Vultur
1895b87e84 MSCC: Add support for Serval SoC family.
As Ocelot, Servalt, Luton and Jaguar2, this family of SoCs are
found in Microsemi Switches solution.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-01-23 18:28:09 +01:00
Horatiu Vultur
036d95958b MSCC: Add board support for Servalt SoC family
Add board support, configuration and DTS for Servalt SoC
family. Currently there is one board in this family.

Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-23 18:27:26 +01:00
Horatiu Vultur
055125171a MSCC: Add support for Servalt SoC family.
As Ocelot, Luton and Jaguar2, this family of SoCs are found
in Microsemi Switches solution.

Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-23 18:27:26 +01:00
Gregory CLEMENT
55037902b8 MIPS: mscc: ocelot: Add ethernet nodes for Ocelot
Import Ethernet related nodes from Linux

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2019-01-23 18:25:43 +01:00
Rick Chen
866ab879c9 nds32: dts: Fix mmc node compatible string
In the two commits:
cf3922dddc
mmc: ftsdc010_mci: Sync compatible with DT mmc node

c14e90e844
riscv: dts: Sync DT with Linux Kernel

ftsdc010_mci's compatible has been modified as
"andestech,atfsdc010" for RISC-V synchronization.
But ae3xx.dts and ag101p.dts which are used for
nds32 adp-ae3xx and adp-ag101p platforms did not
be modified correctly at that time. It will cause
mmc detection failure. Fix it here.

Signed-off-by: Rick Chen <rick@andestech.com>
Cc: Greentime Hu <greentime@andestech.com>
2019-01-22 17:36:20 +08:00
Rick Chen
e690148223 nds32: Fix boot fail issue when build with elf-mculib.
Add -mcmodel=large can let elf-mculib have
the same default behavior just like linux-glibc.
And it help to pass U-Boot booting sequence.

Signed-off-by: Rick Chen <rick@andestech.com>
Cc: Greentime Hu <greentime@andestech.com>
2019-01-22 17:36:04 +08:00
Rick Chen
9135858fb8 nds32: Generate SW fpu instruction.
Force it to generate SW fup instruction.
It help to avoid bugs when running on no-HW-fpu board, but
compile with v3f which support HW fpu instruction.

Signed-off-by: Rick Chen <rick@andestech.com>
Cc: Greentime Hu <greentime@andestech.com>
2019-01-22 17:35:57 +08:00
Rick Chen
28c107f05e nds32: Remove gcc unused option
-G0 is an old option, not support now,
So remove it.
It can help to fix compile error when
build with nds32 pre-build toolchain.

Signed-off-by: Rick Chen <rick@andestech.com>
Cc: Greentime Hu <greentime@andestech.com>
2019-01-22 17:35:53 +08:00
Tom Rini
e8ddbefccd Merge git://git.denx.de/u-boot-marvell
- Sync Armada-38x dts with Linux 4.20 from Chris
- Misc changes and enhancements to Turris Mox (v4) from Marek
- Reserve PSCI area for Armada 8k from Heinrich
- New Allied Telesis x530 board (Armada-385) from Chris
- Misc minor changes (defconfig etc)
2019-01-21 11:59:21 -05:00
Chris Packham
0e31666dfa ARM: mvebu: add support for Allied Telesis x530
This is a range of stackable network switches. The SoC is Armada-385 and
there are a number of variants with differing network port
configurations. The DP variants are intended for a harsher operating
environment so they use a different i2c mux and fit industrial-temp
parts.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2019-01-21 11:39:50 +01:00
Heinrich Schuchardt
cf63dad014 arm64: dts: marvell: armada-ap806: reserve PSCI area
The memory area [0x4000000-0x4200000[ is occupied by the PSCI firmware. Any
attempt to access it from U-Boot leads to an immediate crash.

So let's make the same memory reservation as the vendor device tree.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2019-01-21 11:39:50 +01:00
Marek Behún
3b281aca41 arm: mvebu: turris_mox: Support 1 GB version of Turris Mox
Use get_ram_size to determine if the RAM size on Turris Mox is 512 MiB
or 1 GiB.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Signed-off-by: Stefan Roese <sr@denx.de>
2019-01-21 11:39:50 +01:00
Marek Behún
3dc2f4549c arm: mvebu: dts: Fix Turris Mox device tree
DTC issues a warning because #address-cells and #size-cells properties
are not set in the mdio node.
Also add ethernet1 alias.
Also add RTC node.
Also fix USB3 regulator startup delay time.
Also fix PCI Express SERDES speed to 5 GHz (this is only cosmetic, the
speed value is not used byt the comphy driver for PCI Express, but
should be 5 GHz nonetheless).

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2019-01-21 11:39:49 +01:00
Marek Behún
7dd7c2e796 arm: mvebu: turris_mox: Check and configure modules
Check if Mox modules are connected in supported mode, then configure
the MDIO addresses of switch modules.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Signed-off-by: Stefan Roese <sr@denx.de>
2019-01-21 11:39:49 +01:00
Chris Packham
30c4383da3 ARM: mvebu: sync Armada-38x dts with Linux 4.20
Sync the Armada-38x device tree files with Linux 4.20-rc5. The changes
not taken are new compatible strings for the uart and nand flash
controller. The nand binding is best updated if/when the mtd/nand
infrastructure is updated.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2019-01-21 11:39:49 +01:00
Joakim Tjernlund
64d68dcdd7 mpc83xx: Add support for -msingle-pic-base
-msingle-pic-base is a new gcc(from 4.6) option for ppc and
it reduces the size of my u-boot with about 4 KB.
While at it, add -fno-jump-tables too to save a
few more bytes.

Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com>
Reviewed-by: Mario Six <mario.six@gdsys.cc>
Tested-by: Mario Six <mario.six@gdsys.cc> (on MPC8308)
2019-01-21 08:33:42 +01:00
Philipp Tomsich
2acc24fc28 Kconfig: Migrate BOUNCE_BUFFER
The bounce buffer is used by a few drivers (most of the MMC drivers)
to overcome limitations in their respective DMA implementation.

This moves the configuration to Kconfig and makes it user-selectable
(even though it will be a required feature to make those drivers
work): the expected usage is for drivers depending on this to 'select'
it unconditionally from their respective Kconfig (see follow-up
patches).

This commit includes a full migration using moveconfig.py to ensure
that each commit compiles.  To ensure bisectability we update
dependencies of various drivers to now select BOUNCE_BUFFER when needed.

[trini: Squash all patches to ensure bisectability]
Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Otavio Salvador <otavio@ossystems.com.br> [dw_mmc portion]
Reviewed-by: Fabio Estevam <festevam@gmail.com> [mxsmmc portion]
Reviewed-by: Simon Glass <sjg@chromium.org> [tegra portion]
2019-01-19 09:49:26 -05:00
Tom Rini
77c07e7ed3 Add TFA boot flow for more boards
Add TFA boot defconfig for ls1088a and ls2088a.
 Add dts fixup for PCIe endpoint and root complex.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEorkTmaQ1QAtDiYw67UVZlNoLnbQFAlxCFVMACgkQ7UVZlNoL
 nbQJaA/9GQ+FpUj8AzsWmLd1JYMdjQeoltlYSicqV1oPkzjX3BsPncAYsr6cW2rm
 SMkriCw+xrlTgC8ge1dyzKxWqMovGzUFEGxpDJqIKCc16s8A/Ro+R0y8saNq1Y89
 MI2axPoaPDT4ZRCSWMzzFVv3lfdvFgGyygZljNlmiKqWp1//fE0OJD4ggE8SqgVo
 +5cMmufuhQhuFuFulQw6YwAOdrJ0eN8wb1SB9wJ8zwdwKn6Oy4CgkRGjJEjKRNoK
 Posw8FUPxQybXmsXW2vie9oomQqmI2A1ILzl1KvdRHSbW0N6P7MbAgsGH1vDPW0u
 dDAsutmkjYR7Ihq/4/5jcTdjkPd7LRJU/SSJzRSnZSD1uLDt5Z4jerQBq0BN9nMR
 peUS/nQ5LTT+rGBRevFT1I0hGNVHhArKGpumV8VRxlq7a30lUPSKhd3jOsadqVLU
 TchCZPjFIVaTrlz9NoX0Wa8bz+m5v1MygRiPkxERc8ft3cudn3rI83neeK1WVKSy
 uwSttQ+Q2uPXBvPq80fIKNToxkEBihPCbEHXZUUs3iE3r+jnRLAZ8CelAn1qK7n6
 fw1oduqOqupPVtYaLHZa6fAWj7lX0FCSge7z4oYu4ezCtoCutzUb6rgwHCpSLEA0
 OF/3fzb+Gn68GpcP23P0pPx+0UplEcmOT+f2/fUXgarUyxd5H/Y=
 =vNy2
 -----END PGP SIGNATURE-----

Merge tag 'fsl-qoriq-for-v2019.04-rc1' of git://git.denx.de/u-boot-fsl-qoriq

Add TFA boot flow for more boards

Add TFA boot defconfig for ls1088a and ls2088a.
Add dts fixup for PCIe endpoint and root complex.
2019-01-18 23:11:51 -05:00
Felix Brack
2c3ec20fcc arm: dts: am335x-pdu001: Sync with Linux 5.0-rc2
This patch synchronizes the PDU001 board DTS file with the one used by
Linux 5.0-rc2.
Signed-off-by: Felix Brack <fb@ltec.ch>
2019-01-18 13:40:35 -05:00
Jagan Teki
e236ff0a51 arm: sunxi: Enable CLK, RESET
CLK and DM_RESET drivers are now available for all of
the Allwinner platforms, so enable them in arch/arm/Kconfig

Enabling CLK will select DM_RESET by default.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-01-18 22:19:09 +05:30
Jagan Teki
8dcc7e6922 ARM: dts: sun8i: Update A80 dts(i) from Linux-v4.18-rc3
Update all A80 devicetree dtsi and dtsi files from
Linux-v4.18-rc3 with below commits.

arch/arm/boot/dts/sun9i-a80*:

commit 190e3138f9577885691540dca59c2f07540bde04
Merge: cafc87023b0d a7affb13b271
Author: Arnd Bergmann <arnd@arndb.de>
Date:   Tue Mar 27 14:58:00 2018 +0200

    Merge tag 'sunxi-h3-h5-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt

include/dt-bindings/*/sun9i-a80-*:

commit 783ab76ae553abc23f80ef7511052d055697531b
Author: Chen-Yu Tsai <wens@csie.org>
Date:   Sat Jan 28 20:22:36 2017 +0800

    clk: sunxi-ng: Add A80 Display Engine CCU

Note: sun9i-a80-cx-a99.dts is updated only uart0, since the same
dts is not available in Linux.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-01-18 22:19:09 +05:30
Jagan Teki
99ba430870 reset: Add Allwinner RESET driver
Add common reset driver for all Allwinner SoC's.

Since CLK and RESET share common DT compatible, it is CLK driver
job is to bind the reset driver. So add CLK bind call on respective
SoC driver by passing ccu map descriptor so-that reset deassert,
deassert operations held based on ccu reset table defined from
CLK driver.

Select DM_RESET via CLK_SUNXI, this make hidden section of RESET
since CLK and RESET share common DT compatible and code.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-01-18 22:19:08 +05:30
Jagan Teki
0d47bc7056 clk: Add Allwinner A64 CLK driver
Add initial clock driver for Allwinner A64.

Implement USB clock enable and disable functions for
OHCI, EHCI, OTG and USBPHY gate and clock registers
via ccu clk gate table.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-01-18 22:19:08 +05:30
Aleksandr Aleksandrov
7d659573ce board: sun50i-h5: Add Emlid Neutis N5 support
Emlid Neutis N5 is a SoM based on Allwinner H5, has a WiFi & BT
module, DDR3 RAM and eMMC.

- add neutis-devboard target to dtb makefile
- add dtsi file for Neutis N5 needs
- add config file for Neutis N5 Dev board

Signed-off-by: Aleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
[jagan: update proper commit head]
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-01-18 22:19:08 +05:30
Stefan Mavrodiev
da1ae5905e sunxi: board: Add i2c initialization for sun50i
To use TWI0/1/2 the user can select CONFIG_I2C#_ENABLE.
However even the controller is enabled, the mux for the pins
are not set.

This patch follows the existing mux method. Since the pads are
different, separate check is added for each i2c.

Tested with A64-SOM204 board.

Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2019-01-18 22:19:08 +05:30
Chris Packham
9259c92386 x86: Kconfig: spelling fixes
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-18 09:16:15 -05:00
Chris Packham
d7cf868f88 arm: Kconfig: spelling fixes
Signed-off-by: Chris Packham <judge.packham@gmail.com>
2019-01-18 09:16:15 -05:00
Ramon Fried
8d24a4776a mach-snapdragon: db410: pinctrl: fix pin count
Pin count in APQ8016 was wrong, fix that.

Fixes: ad97051b7f ("mach-snapdragon: Introduce pinctrl driver")
Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2019-01-18 09:16:15 -05:00
Ramon Fried
b12e6945e9 dts: db410: fix indentation
Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2019-01-18 09:16:15 -05:00
Tom Rini
f83ef0dac8 - MIPS: mscc: various enhancements for Luton and Ocelot platforms
- MIPS: mscc: added support for Jaguar2 platform
 - MIPS: optimised SPL linker script
 - MIPS: bcm6368: fix restart flow issues
 - MIPS: fixed CONFIG_OF_EMBED warnings for all MIPS boards
 - MIPS: mt7688: small fixes and enhancements
 - mmc: compile-out write support if disabled
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiQkHUH+J02LLC9InKPlOlyTyXBgFAlw/LR0ACgkQKPlOlyTy
 XBg46xAAv3/7/aZuBhTYLmPuApcjJ/STGwHKtJTZUQtij6pxqbYDQB2AVzmjEbwk
 JR9KfXgvqcJK/XU3qVmrIs4kiHIKpC+y2diBgiCY26UVRFrmeKxP6T/AqLH6wCCG
 PEv0cE3U+XX2RX8VN0cItdhOuwnkbg09ToxAqfBrfPDTvI4xEO1EB28IVYozD16B
 ucBdUFkG4hB5JFqc+Sx8pJ2iSq4SmOp+mHD4sHM2XpbuMB4UnRNkjzQPk7gLHZUo
 i8wQ6tJoDKY07u9//QE75BkND/5dm1PflCNIrvH1/aJlv32lbHHf8Mm/ZEKCcth0
 dFAhalFnhl8TF8l8MgmDmjtlE52u9GUVGBJpRfc7EX1EzLm2dVu62dxBl9r4qyXM
 jj5BZBoXFeaeuA3Zm8Oui+jbkKExiuJOAgbvb5vMzyaQYN0mQjFyMBCOQQzBqBoe
 sRh/itYb0Ie0F0B2Y96mx1UgTQ4LGWtBaWrnuCQhrIB9iwt1vHA6DWNfA5PMelDK
 6iHLVBKYsV6sU+f7Ua9krczwP1p6y9u5XzW9teM7BLO5ab2vsI5/wz78OutAKmul
 NylqF3vtZDSGKz/duvEE54e4ltux0/xv5CFV/xO/bEiScNxGu8OPVIvtaAmgRomG
 vE7m63ZoI5DaxOpuBX4Qh8xOomshu3fM+1LnZ6sjulMXpoAE1vc=
 =Mxqj
 -----END PGP SIGNATURE-----

Merge tag 'mips-pull-2019-11-16' of git://git.denx.de/u-boot-mips

- MIPS: mscc: various enhancements for Luton and Ocelot platforms
- MIPS: mscc: added support for Jaguar2 platform
- MIPS: optimised SPL linker script
- MIPS: bcm6368: fix restart flow issues
- MIPS: fixed CONFIG_OF_EMBED warnings for all MIPS boards
- MIPS: mt7688: small fixes and enhancements
- mmc: compile-out write support if disabled
2019-01-17 19:12:55 -05:00