ARM: omap3_logic: Enable SPL booting device tree

With the generic omap3-u-boot.dtsi file available, this patch
increased the memory of the various incarnations of the omap3_logic
board, and points their respective u-boot.dtsi files to the newly
created generic one, and removes the PLATDATA from the board file.

These are all done at once because the're all utilizing the same
omap3logic.c board file.

Signed-off-by: Adam Ford <aford173@gmail.com>
This commit is contained in:
Adam Ford 2019-02-16 13:31:24 -06:00 committed by Tom Rini
parent ed59a76db0
commit 0cd9465c0b
9 changed files with 39 additions and 41 deletions

View file

@ -4,6 +4,8 @@
* Logic PD - http://www.logicpd.com
*/
#include "omap3-u-boot.dtsi"
/ {
chosen {
stdout-path = &uart1;

View file

@ -4,6 +4,8 @@
* Logic PD - http://www.logicpd.com
*/
#include "omap3-u-boot.dtsi"
/ {
chosen {
stdout-path = &uart1;
@ -18,10 +20,6 @@
clock-frequency = <400000>;
};
&mmc1 {
cd-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* gpio_110 */
};
&mmc2 {
status = "disabled";
};

View file

@ -4,6 +4,8 @@
* Logic PD - http://www.logicpd.com
*/
#include "omap3-u-boot.dtsi"
&i2c1 {
clock-frequency = <400000>;
};

View file

@ -4,6 +4,8 @@
* Logic PD - http://www.logicpd.com
*/
#include "omap3-u-boot.dtsi"
&i2c1 {
clock-frequency = <400000>;
};

View file

@ -56,36 +56,6 @@ DECLARE_GLOBAL_DATA_PTR;
#define LOGIC_MT28_OMAP35_ASYNC_GPMC_CONFIG6 0x09030000
#define LOGIC_MT28_OMAP35_ASYNC_GPMC_CONFIG7 0x00000C50
/* This is only needed until SPL gets OF support */
#ifdef CONFIG_SPL_BUILD
static const struct ns16550_platdata omap3logic_serial = {
.base = OMAP34XX_UART1,
.reg_shift = 2,
.clock = V_NS16550_CLK,
.fcr = UART_FCR_DEFVAL,
};
U_BOOT_DEVICE(omap3logic_uart) = {
"omap_serial",
&omap3logic_serial
};
static const struct omap_hsmmc_plat omap3_logic_mmc0_platdata = {
.base_addr = (struct hsmmc *)OMAP_HSMMC1_BASE,
.cfg.host_caps = MMC_MODE_HS_52MHz | MMC_MODE_HS | MMC_MODE_4BIT,
.cfg.f_min = 400000,
.cfg.f_max = 52000000,
.cfg.voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195,
.cfg.b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT,
};
U_BOOT_DEVICE(omap3_logic_mmc0) = {
.name = "omap_hsmmc",
.platdata = &omap3_logic_mmc0_platdata,
};
#endif
#ifdef CONFIG_SPL_OS_BOOT
int spl_start_uboot(void)
{

View file

@ -1,9 +1,11 @@
CONFIG_ARM=y
# CONFIG_SPL_USE_ARCH_MEMCPY is not set
# CONFIG_SPL_USE_ARCH_MEMSET is not set
CONFIG_ARCH_OMAP2PLUS=y
CONFIG_SYS_TEXT_BASE=0x80100000
CONFIG_TI_COMMON_CMD_OPTIONS=y
# CONFIG_SPL_GPIO_SUPPORT is not set
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_SYS_MALLOC_F_LEN=0x4000
CONFIG_TARGET_OMAP3_LOGIC=y
# CONFIG_SPL_OMAP3_ID_NAND is not set
CONFIG_SPL=y
@ -12,8 +14,11 @@ CONFIG_NR_DRAM_BANKS=2
CONFIG_ANDROID_BOOT_IMAGE=y
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_DEFAULT_FDT_FILE="logicpd-torpedo-35xx-devkit.dtb"
CONFIG_VERSION_VARIABLE=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_SEPARATE_BSS=y
# CONFIG_SPL_FS_EXT4 is not set
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
CONFIG_SYS_PROMPT="OMAP Logic # "
@ -30,10 +35,13 @@ CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(MLO),1792k(u-boot),128k(spl-os),128k(u-boot-env),6m(kernel),-(fs)"
CONFIG_CMD_UBI=y
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="logicpd-torpedo-35xx-devkit"
# CONFIG_ENV_IS_IN_FAT is not set
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SPL_DM=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_SPL_OF_TRANSLATE=y
CONFIG_DM_I2C=y
CONFIG_DM_MMC=y
CONFIG_MMC_OMAP_HS=y

View file

@ -1,9 +1,10 @@
CONFIG_ARM=y
# CONFIG_SPL_USE_ARCH_MEMCPY is not set
# CONFIG_SPL_USE_ARCH_MEMSET is not set
CONFIG_ARCH_OMAP2PLUS=y
CONFIG_SYS_TEXT_BASE=0x80100000
CONFIG_TI_COMMON_CMD_OPTIONS=y
# CONFIG_SPL_GPIO_SUPPORT is not set
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_SYS_MALLOC_F_LEN=0x4000
CONFIG_TARGET_OMAP3_LOGIC=y
# CONFIG_SPL_OMAP3_ID_NAND is not set
CONFIG_SPL=y
@ -12,16 +13,19 @@ CONFIG_NR_DRAM_BANKS=2
CONFIG_ANDROID_BOOT_IMAGE=y
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_DEFAULT_FDT_FILE="logicpd-som-lv-35xx-devkit.dtb"
CONFIG_VERSION_VARIABLE=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_SEPARATE_BSS=y
# CONFIG_SPL_FS_EXT4 is not set
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
# CONFIG_SPL_POWER_SUPPORT is not set
CONFIG_SYS_PROMPT="OMAP Logic # "
# CONFIG_CMD_IMI is not set
CONFIG_CMD_SPL=y
CONFIG_CMD_SPL_NAND_OFS=0x240000
CONFIG_CMD_SPL_WRITE_SIZE=0x20000
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_NAND=y
CONFIG_CMD_NAND_LOCK_UNLOCK=y
CONFIG_CMD_CACHE=y
@ -30,6 +34,7 @@ CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0,nor0=physmap-flash.0"
CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(MLO),1792k(u-boot),128k(spl-os),128k(u-boot-env),6m(kernel),-(fs);physmap-flash.0:-(nor)"
CONFIG_CMD_UBI=y
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="logicpd-som-lv-35xx-devkit"
# CONFIG_ENV_IS_IN_FAT is not set
CONFIG_ENV_IS_IN_NAND=y

View file

@ -1,9 +1,11 @@
CONFIG_ARM=y
# CONFIG_SPL_USE_ARCH_MEMCPY is not set
# CONFIG_SPL_USE_ARCH_MEMSET is not set
CONFIG_ARCH_OMAP2PLUS=y
CONFIG_SYS_TEXT_BASE=0x80100000
CONFIG_TI_COMMON_CMD_OPTIONS=y
# CONFIG_SPL_GPIO_SUPPORT is not set
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_SYS_MALLOC_F_LEN=0x4000
CONFIG_TARGET_OMAP3_LOGIC=y
# CONFIG_SPL_OMAP3_ID_NAND is not set
CONFIG_SPL=y
@ -14,6 +16,8 @@ CONFIG_ANDROID_BOOT_IMAGE=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_SEPARATE_BSS=y
# CONFIG_SPL_FS_EXT4 is not set
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
CONFIG_SYS_PROMPT="OMAP Logic # "
@ -30,6 +34,7 @@ CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(MLO),1792k(u-boot),128k(spl-os),128k(u-boot-env),6m(kernel),-(fs)"
CONFIG_CMD_UBI=y
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="logicpd-torpedo-37xx-devkit"
# CONFIG_ENV_IS_IN_FAT is not set
CONFIG_ENV_IS_IN_NAND=y

View file

@ -1,9 +1,10 @@
CONFIG_ARM=y
# CONFIG_SPL_USE_ARCH_MEMCPY is not set
# CONFIG_SPL_USE_ARCH_MEMSET is not set
CONFIG_ARCH_OMAP2PLUS=y
CONFIG_SYS_TEXT_BASE=0x80100000
CONFIG_TI_COMMON_CMD_OPTIONS=y
# CONFIG_SPL_GPIO_SUPPORT is not set
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_SYS_MALLOC_F_LEN=0x4000
CONFIG_TARGET_OMAP3_LOGIC=y
# CONFIG_SPL_OMAP3_ID_NAND is not set
CONFIG_SPL=y
@ -12,10 +13,14 @@ CONFIG_NR_DRAM_BANKS=2
CONFIG_ANDROID_BOOT_IMAGE=y
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_DEFAULT_FDT_FILE="logicpd-som-lv-37xx-devkit.dtb"
CONFIG_VERSION_VARIABLE=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_SEPARATE_BSS=y
# CONFIG_SPL_FS_EXT4 is not set
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
# CONFIG_SPL_POWER_SUPPORT is not set
CONFIG_SYS_PROMPT="OMAP Logic # "
# CONFIG_CMD_IMI is not set
CONFIG_CMD_SPL=y
@ -29,6 +34,7 @@ CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0,nor0=physmap-flash.0"
CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(MLO),1792k(u-boot),128k(spl-os),128k(u-boot-env),6m(kernel),-(fs);physmap-flash.0:-(nor)"
CONFIG_CMD_UBI=y
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="logicpd-som-lv-37xx-devkit"
# CONFIG_ENV_IS_IN_FAT is not set
CONFIG_ENV_IS_IN_NAND=y