# Objective
- Make `ReflectComponent::apply`, `ReflectComponent::reflect_mut` and
`ReflectBundle::apply` work with `EntityMut` too (currently they only
work with the more restricting `EntityWorldMut`);
- Note: support for the `Filtered*` variants has been left out since the
conversion in that case is more expensive. Let me know if I should add
support for them too.
## Solution
- Make `ReflectComponent::apply`, `ReflectComponent::reflect_mut` and
`ReflectBundle::apply` take an `impl Into<EntityMut<'a>>`;
- Make the corresponding `*Fns` function pointers take a `EntityMut`.
---
## Changelog
- `ReflectComponent::apply`, `ReflectComponent::reflect_mut` and
`ReflectBundle::apply` now accept `EntityMut` as well
## Migration Guide
- `ReflectComponentFns`'s `apply` and `reflect_mut` fields now take
`EntityMut` instead of `&mut EntityWorldMut`
- `ReflectBundleFns`'s `apply` field now takes `EntityMut` instead of
`&mut EntityWorldMut`
# Objective
- Upload previous frame's inverse_view matrix to the GPU for use with
https://github.com/bevyengine/bevy/pull/12898.
---
## Changelog
- Added `prepass_bindings::previous_view_uniforms.inverse_view`.
- Renamed `prepass_bindings::previous_view_proj` to
`prepass_bindings::previous_view_uniforms.view_proj`.
- Renamed `PreviousViewProjectionUniformOffset` to
`PreviousViewUniformOffset`.
- Renamed `PreviousViewProjection` to `PreviousViewData`.
## Migration Guide
- Renamed `prepass_bindings::previous_view_proj` to
`prepass_bindings::previous_view_uniforms.view_proj`.
- Renamed `PreviousViewProjectionUniformOffset` to
`PreviousViewUniformOffset`.
- Renamed `PreviousViewProjection` to `PreviousViewData`.
# Objective
make morph targets and tonemapping more tolerant of delayed image
loading.
neither of these actually fail currently unless using a bespoke loader
(and even then it would be rare), but i am working on adding throttling
for asset gpu uploads (as a stopgap until we can do proper asset
streaming) and they break with that.
## Solution
when a mesh with morph targets is uploaded to the gpu, the prepare
function uploads the morph target texture if it's available, otherwise
it uploads without morph targets. this is generally fine as long as
morph targets are typically loaded from bytes (in gltf loader), but may
fail for a custom loader if the asset server async-loads the target
texture and the texture is not available yet. the mesh fails to render
and doesn't update when the image is loaded
-> if morph targets are specified but not ready yet, retry mesh upload
next frame
tonemapping `unwrap`s on the lookup table image. this is never a problem
since the image is added via `include_bytes!`, but could be a problem in
future with asset gpu throttling/streaming.
-> if the lookup texture is not yet available, use a fallback
-> in the node, check if the fallback was used before caching the bind
group
# Objective
- Implement `From<&'w mut EntityMut>` for `EntityMut<'w>`;
- Make it possible to pass `&mut EntityMut` where `impl Into<EntityMut>`
is required;
- Helps with #12895.
## Solution
- Implement `From<&'w mut EntityMut>` for `EntityMut<'w>`
---
## Changelog
- `EntityMut<'w>` now implements `From<&'w mut EntityMut>`
# Objective
- When viewport is set to the same size as the window on creation, when
adjusting to SizedFullscreen, the window may be smaller than the
viewport for a moment, which caused the arguments to be invalid and
panic.
- Fixes#12000.
## Solution
- The fix consists of matching the size of the viewport to the lower
size of the window ( if the x value of the window is lower, I update
only the x value of the viewport, same for the y value). Also added a
test to show that it does not panic anymore.
---
# Objective
- #12791 broke example `irradiance_volumes`
- Fixes#12876
```
wgpu error: Validation Error
Caused by:
In Device::create_render_pipeline
note: label = `pbr_opaque_mesh_pipeline`
Color state [0] is invalid
Sample count 8 is not supported by format Rgba8UnormSrgb on this device. The WebGPU spec guarentees [1, 4] samples are supported by this format. With the TEXTURE_ADAPTER_SPECIFIC_FORMAT_FEATURES feature your device supports [1, 2, 4].
```
## Solution
- Shift bits a bit more
# Objective
- Add a way to easily get currently waiting pipelines IDs.
## Solution
- Added a method to get waiting pipelines `CachedPipelineId`.
---------
Co-authored-by: James Liu <contact@jamessliu.com>
# Objective
Since BufferVec was first introduced, `bytemuck` has added additional
traits with fewer restrictions than `Pod`. Within BufferVec, we only
rely on the constraints of `bytemuck::cast_slice` to a `u8` slice, which
now only requires `T: NoUninit` which is a strict superset of `Pod`
types.
## Solution
Change out the `Pod` generic type constraint with `NoUninit`. Also
taking the opportunity to substitute `cast_slice` with
`must_cast_slice`, which avoids a runtime panic in place of a compile
time failure if `T` cannot be used.
---
## Changelog
Changed: `BufferVec` now supports working with types containing
`NoUninit` but not `Pod` members.
Changed: `BufferVec` will now fail to compile if used with a type that
cannot be safely read from. Most notably, this includes ZSTs, which
would previously always panic at runtime.
# Objective
Augment Bevy's random sampling capabilities by providing good tools for
producing random directions and rotations.
## Solution
The `rand` crate has a natural tool for providing `Distribution`s whose
output is a type that doesn't require any additional data to sample
values — namely,
[`Standard`](https://docs.rs/rand/latest/rand/distributions/struct.Standard.html).
Here, our existing `ShapeSample` implementations have been put to good
use in providing these, resulting in patterns like the following:
```rust
// Using thread-local rng
let random_direction1: Dir3 = random();
// Using an explicit rng
let random_direction2: Dir3 = rng.gen();
// Using an explicit rng coupled explicitly with Standard
let random_directions: Vec<Dir3> = rng.sample_iter(Standard).take(5).collect();
```
Furthermore, we have introduced a trait `FromRng` which provides sugar
for `rng.gen()` that is more namespace-friendly (in this author's
opinion):
```rust
let random_direction = Dir3::from_rng(rng);
```
The types this has been implemented for are `Dir2`, `Dir3`, `Dir3A`, and
`Quat`. Notably, `Quat` uses `glam`'s implementation rather than an
in-house one, and as a result, `bevy_math`'s "rand" feature now enables
that of `glam`.
---
## Changelog
- Created `standard` submodule in `sampling` to hold implementations and
other items related to the `Standard` distribution.
- "rand" feature of `bevy_math` now enables that of `glam`.
---
## Discussion
From a quick glance at `Quat`'s distribution implementation in `glam`, I
am a bit suspicious, since it is simple and doesn't match any algorithm
that I came across in my research. I will do a little more digging as a
follow-up to this and see if it's actually uniform (maybe even using
those tools I wrote — what a thrill).
As an aside, I'd also like to say that I think
[`Distribution`](https://docs.rs/rand/latest/rand/distributions/trait.Distribution.html)
is really, really good. It integrates with distributions provided
externally (e.g. in `rand` itself and its extensions) along with doing a
good job of isolating the source of randomness, so that output can be
reliably reproduced if need be. Finally, `Distribution::sample_iter` is
quite good for ergonomically acquiring lots of random values. At one
point I found myself writing traits to describe random sampling and
essentially reinvented this one. I just think it's good, and I think
it's worth centralizing around to a significant extent.
# Objective
See https://github.com/gfx-rs/wgpu/issues/5488 for context and
rationale.
## Solution
- Disables `wgpu::Features::RAY_QUERY` and
`wgpu::Features::RAY_TRACING_ACCELERATION_STRUCTURE` by default. They
must be explicitly opted into now.
---
## Changelog
- Disables `wgpu::Features::RAY_QUERY` and
`wgpu::Features::RAY_TRACING_ACCELERATION_STRUCTURE` by default. They
must be explicitly opted into now.
## Migration Guide
- If you need `wgpu::Features::RAY_QUERY` or
`wgpu::Features::RAY_TRACING_ACCELERATION_STRUCTURE`, enable them
explicitly using `WgpuSettings::features`
# Objective
- Fix#7303
- bevy would spawn a lot of tasks in parallel iteration when it matchs a
large storage and many small storage ,it significantly increase the
overhead of schedule.
## Solution
- collect small storage into one task
# Objective
Fix#11931
## Solution
- Make stepping a non-default feature
- Adjust documentation and examples
- In particular, make the breakout example not show the stepping prompt
if compiled without the feature (shows a log message instead)
---
## Changelog
- Removed `bevy_debug_stepping` from default features
## Migration Guide
The system-by-system stepping feature is now disabled by default; to use
it, enable the `bevy_debug_stepping` feature explicitly:
```toml
[dependencies]
bevy = { version = "0.14", features = ["bevy_debug_stepping"] }
```
Code using
[`Stepping`](https://docs.rs/bevy/latest/bevy/ecs/schedule/struct.Stepping.html)
will still compile with the feature disabled, but will print a runtime
error message to the console if the application attempts to enable
stepping.
---------
Co-authored-by: James Liu <contact@jamessliu.com>
Co-authored-by: François Mockers <francois.mockers@vleue.com>
# Objective
A help thread on discord asked how to use signed URLs for assets. This
currently fails because the query parameters are included in the
extension, which causes no suitable loader to be found:
```
Failed to load asset 'http://localhost:4566/dev/1711921849174.jpeg?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Content-Sha256=UNSIGNED-PAYLOAD&X-Amz-Credential=%2F20240331%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20240331T230145Z&X-Amz-Expires=900&X-Amz-Signature=64855e731c279fa01063568e37095562ef74e09387c881bd3e3604181d0cc108&X-Amz-SignedHeaders=host&x-id=GetObject' with asset loader 'bevy_render::texture::image_loader::ImageLoader':
Could not load texture file: Error reading image file localhost:4566/dev/1711921849174.jpeg?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Content-Sha256=UNSIGNED-PAYLOAD&X-Amz-Credential=%2F20240331%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20240331T230145Z&X-Amz-Expires=900&X-Amz-Signature=64855e731c279fa01063568e37095562ef74e09387c881bd3e3604181d0cc108&X-Amz-SignedHeaders=host&x-id=GetObject: invalid image extension: jpeg?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Content-Sha256=UNSIGNED-PAYLOAD&X-Amz-Credential=%2F20240331%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20240331T230145Z&X-Amz-Expires=900&X-Amz-Signature=64855e731c279fa01063568e37095562ef74e09387c881bd3e3604181d0cc108&X-Amz-SignedHeaders=host&x-id=GetObject, this is an error in `bevy_render`.
```
## Solution
Make `get_full_extension` remove everything after the first `?`
character.
If this is accepted then it should also be documented in `AssetPath`
that extensions cannot include question marks.
An alternative is to special case this handling only for wasm, but that
would be annoying for the
[bevy_web_asset](https://github.com/johanhelsing/bevy_web_asset) plugin,
and in my opinion also just more confusing overall.
# Objective
- Remove `close_on_esc`
- For context about why we are removing it see:
[discord](https://discordapp.com/channels/691052431525675048/692572690833473578/1225075194524073985)
## Migration Guide
- Users who added `close_on_esc` in their application will have to
replace it with their own solution.
```rust
pub fn close_on_esc(
mut commands: Commands,
focused_windows: Query<(Entity, &Window)>,
input: Res<ButtonInput<KeyCode>>,
) {
for (window, focus) in focused_windows.iter() {
if !focus.focused {
continue;
}
if input.just_pressed(KeyCode::Escape) {
commands.entity(window).despawn();
}
}
}
```
# Objective
- Add `remove_by_id` method to `EntityWorldMut` and `EntityCommands`
- This is a duplicate of the awesome work by @mateuseap, last updated
04/09/23 - #9663
- I'm opening a second one to ensure the feature makes it into `0.14`
- Fixes#9261
## Solution
Almost identical to #9663 with three exceptions
- Uses a closure instead of struct for commands, consistent with other
similar commands
- Does not refactor `EntityCommands::insert`, so no migration guide
- `EntityWorldMut::remove_by_id` is now safe containing unsafe blocks, I
think thats what @SkiFire13 was indicating should happen [in this
comment](https://github.com/bevyengine/bevy/pull/9663#discussion_r1314307525)
## Changelog
- Added `EntityWorldMut::remove_by_id` method and its tests.
- Added `EntityCommands::remove_by_id` method and its tests.
---------
Co-authored-by: James Liu <contact@jamessliu.com>
# Objective
- Closes#12019
- Related to #4955
- Useful for dev_tools and networking
## Solution
- Create `World::iter_resources()` and `World::iter_resources_mut()`
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: James Liu <contact@jamessliu.com>
Co-authored-by: Pablo Reinhardt <126117294+pablo-lua@users.noreply.github.com>
Just updating docs for the arc gizmo so that the argument documentation
matches the order of the function arguments.
Also added docs for the color argument.
# Objective
- Improve docs
## Solution
- Moved the radius argument to the end of the argument list to match the
function
---
## Changelog
> N/A
## Migration Guide
> N/A
---------
Co-authored-by: François Mockers <francois.mockers@vleue.com>
# Objective
- As @james7132 said [on
Discord](https://discord.com/channels/691052431525675048/692572690833473578/1224626740773523536),
the `close_on_esc` system is forcing `bevy_window` to depend on
`bevy_input`.
- `close_on_esc` is not likely to be used in production, so it arguably
does not have a place in `bevy_window`.
## Solution
- As suggested by @afonsolage, move `close_on_esc` into
`bevy_dev_tools`.
- Add an example to the documentation too.
- Remove `bevy_window`'s dependency on `bevy_input`.
- Add `bevy_reflect`'s `smol_str` feature to `bevy_window` because it
was implicitly depended upon with `bevy_input` before it was removed.
- Remove any usage of `close_on_esc` from the examples.
- `bevy_dev_tools` is not enabled by default. I personally find it
frustrating to run examples with additional features, so I opted to
remove it entirely.
- This is up for discussion if you have an alternate solution.
---
## Changelog
- Moved `bevy_window::close_on_esc` to `bevy_dev_tools::close_on_esc`.
- Removed usage of `bevy_dev_tools::close_on_esc` from all examples.
## Migration Guide
`bevy_window::close_on_esc` has been moved to
`bevy_dev_tools::close_on_esc`. You will first need to enable
`bevy_dev_tools` as a feature in your `Cargo.toml`:
```toml
[dependencies]
bevy = { version = "0.14", features = ["bevy_dev_tools"] }
```
Finally, modify any imports to use `bevy_dev_tools` instead:
```rust
// Old:
// use bevy:🪟:close_on_esc;
// New:
use bevy::dev_tools::close_on_esc;
App::new()
.add_systems(Update, close_on_esc)
// ...
.run();
```
# Objective
- Since #10811,Bevy uses `assert `in the hot path of iteration. The
`for_each `method has an assert in the outer loop to help the compiler
remove unnecessary branching in the internal loop.
- However , ` for` style iterations do not receive the same treatment.
it still have a branch check in the internal loop, which could
potentially hurt performance.
## Solution
- use `TableRow::from_u32 ` instead of ` TableRow::from_usize` to avoid
unnecessary branch.
Before
After
----------------------------------------------------------------------------
# Objective
`AspectRatio` is a newtype of `f32`, so it can implement basic traits;
`Copy`, `Clone`, `Debug`, `PartialEq` and `PartialOrd`.
## Solution
Derive basic traits for `AspectRatio`.
This is 1 of 5 iterative PR's that affect bevy_ui/layout
---
# Objective
- Extract `UiSurface` into its own file to make diffs in future PR's
easier to digest
## Solution
- Moved `UiSurface` to its own file
This commit makes the following optimizations:
## `MeshPipelineKey`/`BaseMeshPipelineKey` split
`MeshPipelineKey` has been split into `BaseMeshPipelineKey`, which lives
in `bevy_render` and `MeshPipelineKey`, which lives in `bevy_pbr`.
Conceptually, `BaseMeshPipelineKey` is a superclass of
`MeshPipelineKey`. For `BaseMeshPipelineKey`, the bits start at the
highest (most significant) bit and grow downward toward the lowest bit;
for `MeshPipelineKey`, the bits start at the lowest bit and grow upward
toward the highest bit. This prevents them from colliding.
The goal of this is to avoid having to reassemble bits of the pipeline
key for every mesh every frame. Instead, we can just use a bitwise or
operation to combine the pieces that make up a `MeshPipelineKey`.
## `specialize_slow`
Previously, all of `specialize()` was marked as `#[inline]`. This
bloated `queue_material_meshes` unnecessarily, as a large chunk of it
ended up being a slow path that was rarely hit. This commit refactors
the function to move the slow path to `specialize_slow()`.
Together, these two changes shave about 5% off `queue_material_meshes`:
## Migration Guide
- The `primitive_topology` field on `GpuMesh` is now an accessor method:
`GpuMesh::primitive_topology()`.
- For performance reasons, `MeshPipelineKey` has been split into
`BaseMeshPipelineKey`, which lives in `bevy_render`, and
`MeshPipelineKey`, which lives in `bevy_pbr`. These two should be
combined with bitwise-or to produce the final `MeshPipelineKey`.
# Objective
Related to #10572
Allow the `Annulus` primitive to be meshed.
## Solution
We introduce a `Meshable` structure, `AnnulusMeshBuilder`, which allows
the `Annulus` primitive to be meshed, leaving optional configuration of
the number of angular sudivisions to the user. Here is a picture of the
annulus's UV-mapping:
<img width="1440" alt="Screenshot 2024-03-26 at 10 39 48 AM"
src="https://github.com/bevyengine/bevy/assets/2975848/b170291d-cba7-441b-90ee-2ad6841eaedb">
Other features are essentially identical to the implementations for
`Circle`/`Ellipse`.
---
## Changelog
- Introduced `AnnulusMeshBuilder`
- Implemented `Meshable` for `Annulus` with `Output =
AnnulusMeshBuilder`
- Implemented `From<Annulus>` and `From<AnnulusMeshBuilder>` for `Mesh`
- Added `impl_reflect!` declaration for `Annulus` and `Triangle3d` in
`bevy_reflect`
---
## Discussion
### Design considerations
The only interesting wrinkle here is that the existing UV-mapping of
`Ellipse` (and hence of `Circle` and `RegularPolygon`) is non-radial
(it's skew-free, created by situating the mesh in a bounding rectangle),
so the UV-mapping of `Annulus` doesn't limit to that of `Circle` as its
inner radius tends to zero, for instance. I don't see this as a real
issue for `Annulus`, which should almost certainly have this kind of
UV-mapping, but I think we ought to at least consider allowing mesh
configuration for `Circle`/`Ellipse` that performs radial UV-mapping
instead. (In these cases in particular, it would be especially easy,
since we wouldn't need a different parameter set in the builder.)
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- #10572
There is no 3D primitive available for the common shape of a tetrahedron
(3-simplex).
## Solution
This PR introduces a new type to the existing math primitives:
- `Tetrahedron`: a polyhedron composed of four triangular faces, six
straight edges, and four vertices
---
## Changelog
### Added
- `Tetrahedron` primitive to the `bevy_math` crate
- `Tetrahedron` tests (`area`, `volume` methods)
- `impl_reflect!` declaration for `Tetrahedron` in the `bevy_reflect`
crate
# Objective
Fixes#12442
## Solution
Change `process_touch_event` to not update previous_position /
previous_force, and change it once per frame in
`touch_screen_input_system`.
# Objective
Sometimes it's useful to iterate over removed entities. For example, in
my library
[bevy_replicon](https://github.com/projectharmonia/bevy_replicon) I need
it to iterate over all removals to replicate them over the network.
Right now we do lookups, but it would be more convenient and faster to
just iterate over all removals.
## Solution
Add `RemovedComponentEvents::iter`.
---
## Changelog
### Added
- `RemovedComponentEvents::iter` to iterate over all removed components.
---------
Co-authored-by: Pablo Reinhardt <126117294+pablo-lua@users.noreply.github.com>
# Objective
- There are several redundant imports in the tests and examples that are
not caught by CI because additional flags need to be passed.
## Solution
- Run `cargo check --workspace --tests` and `cargo check --workspace
--examples`, then fix all warnings.
- Add `test-check` to CI, which will be run in the check-compiles job.
This should catch future warnings for tests. Examples are already
checked, but I'm not yet sure why they weren't caught.
## Discussion
- Should the `--tests` and `--examples` flags be added to CI, so this is
caught in the future?
- If so, #12818 will need to be merged first. It was also a warning
raised by checking the examples, but I chose to split off into a
separate PR.
---------
Co-authored-by: François Mockers <francois.mockers@vleue.com>
# Objective
There are currently 2 different warning messages that are logged when
resizing on Linux with Nvidia drivers (introduced in
70c69cdd51).
Fixes#12830
## Solution
Generalize both to say:
```Couldn't get swap chain texture. This often happens with the NVIDIA drivers on Linux. It can be safely ignored.```
# Objective
- Since #12453, `DeterministicRenderingConfig` doesn't do anything
## Solution
- Remove it
---
## Migration Guide
- Removed `DeterministicRenderingConfig`. There shouldn't be any z
fighting anymore in the rendering even without setting
`stable_sort_z_fighting`
# Objective
- The `bundles` parameter in `insert_or_spawn_batch` method has
inconsistent naming with docs (e.g. `bundles_iter`) since #11107.
## Solution
- Replace `bundles` with `bundles_iter`, as `bundles_iter` is more
expressive to its type.
# Objective
Make it easy for crates.io / lib.rs users or automated tools to find the
repository of `bevy_utils_proc_macros`
## Solution
Add the `repository` field to the `Cargo.toml` of
`bevy_utils_proc_macros`
# Objective
This is a necessary precursor to #9122 (this was split from that PR to
reduce the amount of code to review all at once).
Moving `!Send` resource ownership to `App` will make it unambiguously
`!Send`. `SubApp` must be `Send`, so it can't wrap `App`.
## Solution
Refactor `App` and `SubApp` to not have a recursive relationship. Since
`SubApp` no longer wraps `App`, once `!Send` resources are moved out of
`World` and into `App`, `SubApp` will become unambiguously `Send`.
There could be less code duplication between `App` and `SubApp`, but
that would break `App` method chaining.
## Changelog
- `SubApp` no longer wraps `App`.
- `App` fields are no longer publicly accessible.
- `App` can no longer be converted into a `SubApp`.
- Various methods now return references to a `SubApp` instead of an
`App`.
## Migration Guide
- To construct a sub-app, use `SubApp::new()`. `App` can no longer
convert into `SubApp`.
- If you implemented a trait for `App`, you may want to implement it for
`SubApp` as well.
- If you're accessing `app.world` directly, you now have to use
`app.world()` and `app.world_mut()`.
- `App::sub_app` now returns `&SubApp`.
- `App::sub_app_mut` now returns `&mut SubApp`.
- `App::get_sub_app` now returns `Option<&SubApp>.`
- `App::get_sub_app_mut` now returns `Option<&mut SubApp>.`
# Objective
Fix crashing on Linux with latest stable Nvidia 550 driver when
resizing. The crash happens at startup with some setups.
Fixes#12199
I think this would be nice to get into 0.13.1
## Solution
Ignore `wgpu::SurfaceError::Outdated` always on this platform+driver.
It looks like Nvidia considered the previous behaviour of not returning
this error a bug:
"Fixed a bug where vkAcquireNextImageKHR() was not returning
VK_ERROR_OUT_OF_DATE_KHR when it should with WSI X11 swapchains"
(https://www.nvidia.com/Download/driverResults.aspx/218826/en-us/)
What I gather from this is that the surface was outdated on previous
drivers too, but they just didn't report it as an error. So behaviour
shouldn't change.
In the issue conversation we experimented with calling `continue` when
this error happens, but I found that it results in some small issues
like bevy_egui scale not updating with the window sometimes. Just doing
nothing seems to work better.
## Changelog
- Fixed crashing on Linux with Nvidia 550 driver when resizing the
window
## Migration Guide
---------
Co-authored-by: James Liu <contact@jamessliu.com>
# Objective
For some asset loaders, it can be useful not to read the entire asset
file and just read a specific region of a file. For this, we need a way
to seek at a specific position inside the file
## Solution
I added support for `AsyncSeek` to `Reader`. In my case, I want to only
read a part of a file, and for that I need to seek to a specific point.
## Migration Guide
Every custom reader (which previously only needed the `AsyncRead` trait
implemented) now also needs to implement the `AsyncSeek` trait to add
the seek capability.
# Objective
- Fix#12746
- When users despawn a scene, the `InstanceId` within `spawned_scenes`
and `spawned_dynamic_scenes` is not removed, causing a potential memory
leak
## Solution
- `spawned_scenes` field was never used, and I removed it
- Add a component remove hook for `Handle<DynamicScene>`, and when the
`Handle<DynamicScene>` component is removed, delete the corresponding
`InstanceId` from `spawned_dynamic_scenes`
- Fixes #[12762](https://github.com/bevyengine/bevy/issues/12762).
## Migration Guide
- `Quat` no longer implements `VectorSpace` as unit quaternions don't
actually form proper vector spaces. If you're absolutely certain that
what you're doing is correct, convert the `Quat` into a `Vec4` and
perform the operations before converting back.
# Objective
Other than the exposed functions for reading matched tables and
archetypes, a `QueryState` does not actually need both internal Vecs for
storing matched archetypes and tables. In practice, it will only use one
of the two depending on if it uses dense or archetypal iteration.
Same vein as #12474. The goal is to reduce the memory overhead of using
queries, which Bevy itself, ecosystem plugins, and end users are already
fairly liberally using.
## Solution
Add `StorageId`, which is a union over `TableId` and `ArchetypeId`, and
store only one of the two at runtime. Read the slice as if it was one ID
depending on whether the query is dense or not.
This follows in the same vein as #5085; however, this one directly
impacts heap memory usage at runtime, while #5085 primarily targeted
transient pointers that might not actually exist at runtime.
---
## Changelog
Changed: `QueryState::matched_tables` now returns an iterator instead of
a reference to a slice.
Changed: `QueryState::matched_archetypes` now returns an iterator
instead of a reference to a slice.
## Migration Guide
`QueryState::matched_tables` and `QueryState::matched_archetypes` does
not return a reference to a slice, but an iterator instead. You may need
to use iterator combinators or collect them into a Vec to use it as a
slice.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Speed up CPU-side rendering.
## Solution
Use `QueryIter::for_each` and `Mut::bypass_change_detection` to minimize
the total amount of data being written and allow autovectorization to
speed up iteration.
## Performance
Tested against the default `many_cubes`, this results in greater than
15x speed up: 281us -> 18.4us.
As `ViewVisibility::HIDDEN` just wraps false, this is likely just
degenerating into `memset(0)`s on the tables.
Today, we sort all entities added to all phases, even the phases that
don't strictly need sorting, such as the opaque and shadow phases. This
results in a performance loss because our `PhaseItem`s are rather large
in memory, so sorting is slow. Additionally, determining the boundaries
of batches is an O(n) process.
This commit makes Bevy instead applicable place phase items into *bins*
keyed by *bin keys*, which have the invariant that everything in the
same bin is potentially batchable. This makes determining batch
boundaries O(1), because everything in the same bin can be batched.
Instead of sorting each entity, we now sort only the bin keys. This
drops the sorting time to near-zero on workloads with few bins like
`many_cubes --no-frustum-culling`. Memory usage is improved too, with
batch boundaries and dynamic indices now implicit instead of explicit.
The improved memory usage results in a significant win even on
unbatchable workloads like `many_cubes --no-frustum-culling
--vary-material-data-per-instance`, presumably due to cache effects.
Not all phases can be binned; some, such as transparent and transmissive
phases, must still be sorted. To handle this, this commit splits
`PhaseItem` into `BinnedPhaseItem` and `SortedPhaseItem`. Most of the
logic that today deals with `PhaseItem`s has been moved to
`SortedPhaseItem`. `BinnedPhaseItem` has the new logic.
Frame time results (in ms/frame) are as follows:
| Benchmark | `binning` | `main` | Speedup |
| ------------------------ | --------- | ------- | ------- |
| `many_cubes -nfc -vpi` | 232.179 | 312.123 | 34.43% |
| `many_cubes -nfc` | 25.874 | 30.117 | 16.40% |
| `many_foxes` | 3.276 | 3.515 | 7.30% |
(`-nfc` is short for `--no-frustum-culling`; `-vpi` is short for
`--vary-per-instance`.)
---
## Changelog
### Changed
* Render phases have been split into binned and sorted phases. Binned
phases, such as the common opaque phase, achieve improved CPU
performance by avoiding the sorting step.
## Migration Guide
- `PhaseItem` has been split into `BinnedPhaseItem` and
`SortedPhaseItem`. If your code has custom `PhaseItem`s, you will need
to migrate them to one of these two types. `SortedPhaseItem` requires
the fewest code changes, but you may want to pick `BinnedPhaseItem` if
your phase doesn't require sorting, as that enables higher performance.
## Tracy graphs
`many-cubes --no-frustum-culling`, `main` branch:
<img width="1064" alt="Screenshot 2024-03-12 180037"
src="https://github.com/bevyengine/bevy/assets/157897/e1180ce8-8e89-46d2-85e3-f59f72109a55">
`many-cubes --no-frustum-culling`, this branch:
<img width="1064" alt="Screenshot 2024-03-12 180011"
src="https://github.com/bevyengine/bevy/assets/157897/0899f036-6075-44c5-a972-44d95895f46c">
You can see that `batch_and_prepare_binned_render_phase` is a much
smaller fraction of the time. Zooming in on that function, with yellow
being this branch and red being `main`, we see:
<img width="1064" alt="Screenshot 2024-03-12 175832"
src="https://github.com/bevyengine/bevy/assets/157897/0dfc8d3f-49f4-496e-8825-a66e64d356d0">
The binning happens in `queue_material_meshes`. Again with yellow being
this branch and red being `main`:
<img width="1064" alt="Screenshot 2024-03-12 175755"
src="https://github.com/bevyengine/bevy/assets/157897/b9b20dc1-11c8-400c-a6cc-1c2e09c1bb96">
We can see that there is a small regression in `queue_material_meshes`
performance, but it's not nearly enough to outweigh the large gains in
`batch_and_prepare_binned_render_phase`.
---------
Co-authored-by: James Liu <contact@jamessliu.com>
This commit changes the `StandardMaterialKey` to be based on a set of
bitflags instead of a structure. We hash it every frame for every mesh,
and `#[derive(Hash)]` doesn't generate particularly efficient code for
large structures full of small types. Packing it into a single `u64`
therefore results in a roughly 10% speedup in `queue_material_meshes` on
`many_cubes --no-frustum-culling`.
# Objective
Wireframes are currently supported for 3D meshes using the
`WireframePlugin` in `bevy_pbr`. This PR adds the same functionality for
2D meshes.
Closes#5881.
## Solution
Since there's no easy way to share material implementations between 2D,
3D, and UI, this is mostly a straight copy and rename from the original
plugin into `bevy_sprite`.
<img width="1392" alt="image"
src="https://github.com/bevyengine/bevy/assets/3961616/7aca156f-448a-4c7e-89b8-0a72c5919769">
---
## Changelog
- Added `Wireframe2dPlugin` and related types to support 2D wireframes.
- Added an example to demonstrate how to use 2D wireframes
---------
Co-authored-by: IceSentry <IceSentry@users.noreply.github.com>
# Objective
- Allow cloning `WinitSettings`. I use this in
[bevy_worldswap](https://github.com/UkoeHB/bevy_worldswap) when
synchronizing secondary app window state.
## Solution
- Add `Clone` to `WinitSettings`.
---
## Changelog
- Added `Clone` to `WinitSettings`.
# Objective
- Reduce the size of `create_windows` and isolate accessibility setup
logic.
## Solution
- Move accessibility setup for new windows to the `accessibility`
module.
## Comments
This is a small refactor, no behavior changes.
# Objective
- Disabling some plugins causes a crash due to ambiguities relying in
feature flags and not checking if both plugins are enabled causing code
like this to crash:
`app.add_plugins(DefaultPlugins.build().disable::<AnimationPlugin>())`
## Solution
- Check if plugins were added before ambiguities.
- Move bevy_gizmos ambiguities from bevy_internal to bevy_gizmos since
they already depend on them.
# Objective
Fixes#12752. Fixes#12750. Document the runtime complexity of all of
the `O(1)` operations on the individual APIs.
## Solution
* Mirror `Query::contains` onto `QueryState::contains`
* Make `QueryState::as_nop` pub(crate)
* Make `NopWorldQuery` pub(crate)
* Document all of the O(1) operations on Query and QueryState.
# Objective
Fixes#12727. All parts that `PersistentGpuBuffer` interact with should
be 100% safe both on the CPU and the GPU: `Queue::write_buffer_with`
zeroes out the slice being written to and when uploading to the GPU, and
all slice writes are bounds checked on the CPU side.
## Solution
Make `PersistentGpuBufferable` a safe trait. Enforce it's correct
implementation via assertions. Re-enable `forbid(unsafe_code)` on
`bevy_pbr`.
# Objective
- A scene usually gets created using the `SceneBundle` or
`DynamicSceneBundle`. This means that the scene's entities get added as
children of the root entity (the entity on which the `SceneBundle` gets
added)
- When the scene gets deleted using the `SceneSpawner`, the scene's
entities are deleted, but the `Children` component of the root entity
doesn't get updated. This means that the hierarchy becomes unsound, with
Children linking to non-existing components.
## Solution
- Update the `despawn_sync` logic to also update the `Children` from any
parents of the scene, if there are any
- Adds a test where a Scene gets despawned and checks for dangling
Children references on the parent. The test fails on `main` but works
here.
## Alternative implementations
- One option could be to add a `parent: Option<Entity>` on the
[InstanceInfo](df15cd7dcc/crates/bevy_scene/src/scene_spawner.rs (L27))
struct that tracks if the SceneInstance was added as a child of a root
entity
# Objective
When I wrote #12747 I neglected to translate random samples from
triangles back to the point where they originated, so they would be
sampled near the origin instead of at the actual triangle location.
## Solution
Translate by the first vertex location so that the samples follow the
actual triangle.
# Objective
Fixes#12392, fixes#12393, and fixes#11387. Implement QueryData for
Archetype and EntityLocation.
## Solution
Add impls for both of the types.
---
## Changelog
Added: `&Archetype` now implements `QueryData`
Added: `EntityLocation` now implements `QueryData`
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Closes https://github.com/bevyengine/bevy/pull/12415
## Solution
- Refactored code that was changed/deprecated in `image` 0.25.
- Please review this PR carefully since I'm just making the changes
without any context or deep knowledge of the module.
---------
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: James Liu <contact@jamessliu.com>
# Objective
Fix#12728. Fix unsoundnesss from unhandled null characters in Android
logs.
## Solution
Use `CString` instead of using formatted Strings. Properly document the
safety invariants of the FFI call.
# Objective
- Move `PanicHandlerPlugin` into `bevy_app`
- Fixes#12603 .
## Solution
- I moved the `bevy_panic_handler` into `bevy_app`
- Copy pasted `bevy_panic_handler`'s lib.rs into a separate module in
`bevy_app` as a `panic_handler.rs` module file and added the
`PanicHandlerPlugin` in lib.rs of `bevy_app`
- added the dependency into `cargo.toml`
## Review notes
- I probably want some feedback if I imported App and Plugin correctly
in `panic_handler.rs` line 10 and 11.
- As of yet I have not deleted `bevy_panic_handler` crate, wanted to get
a check if I added it correctly.
- Once validated that my move was correct, I'll probably have to remove
the panic handler find default plugins which I probably need some help
to find.
- And then remove bevy panic_handler and making sure ci passes.
- This is my first issue for contributing to bevy so let me know if I am
doing anything wrong.
## tools context
- rust is 1.76 version
- Windows 11
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Avoid unbounded HashMap growth for opening/closing windows.
## Solution
- Remove map entry in `WinitWindows::remove_window`.
## Migration Guide
- `WinitWindows::get_window_entity` now returns `None` after a window is
closed, instead of a dead entity.
---
## Comments
The comment this PR replaces was added in
https://github.com/bevyengine/bevy/pull/3575. Since `get_window_entity`
now returns an `Entity` instead of a `WindowId`, this no longer seems
useful. Note that `get_window_entity` is only used
[here](56bcbb0975/crates/bevy_winit/src/lib.rs (L436)),
immediately followed by a warning if the entity returned doesn't exist.
# Objective
- Fixes#12677
## Solution
Updated documentation to make it explicit that enabling the appropriate
optional features is required to use the supported audio file format, as
well as provided link to the Bevy docs listing the optional features.
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
## Problem
- A mutable borrow of a handle cannot be directly turned into an AssetId
with `.into()`. You must do a reborrow `&*my_handle`.
## Solution
- Add an impl for From<&mut Handle> to AssetId and UntypedAssetId.
# Objective
Previously, the `Point` trait, which abstracts all of the operations of
a real vector space, was sitting in the submodule of `bevy_math` for
cubic splines. However, the trait has broader applications than merely
cubic splines, and we should use it when possible to avoid code
duplication when performing vector operations.
## Solution
`Point` has been moved into a new submodule in `bevy_math` named
`common_traits`. Furthermore, it has been renamed to `VectorSpace`,
which is more descriptive, and an additional trait `NormedVectorSpace`
has been introduced to expand the API to cover situations involving
geometry in addition to algebra. Additionally, `VectorSpace` itself now
requires a `ZERO` constant and `Neg`. It also supports a `lerp` function
as an automatic trait method.
Here is what that looks like:
```rust
/// A type that supports the mathematical operations of a real vector space, irrespective of dimension.
/// In particular, this means that the implementing type supports:
/// - Scalar multiplication and division on the right by elements of `f32`
/// - Negation
/// - Addition and subtraction
/// - Zero
///
/// Within the limitations of floating point arithmetic, all the following are required to hold:
/// - (Associativity of addition) For all `u, v, w: Self`, `(u + v) + w == u + (v + w)`.
/// - (Commutativity of addition) For all `u, v: Self`, `u + v == v + u`.
/// - (Additive identity) For all `v: Self`, `v + Self::ZERO == v`.
/// - (Additive inverse) For all `v: Self`, `v - v == v + (-v) == Self::ZERO`.
/// - (Compatibility of multiplication) For all `a, b: f32`, `v: Self`, `v * (a * b) == (v * a) * b`.
/// - (Multiplicative identity) For all `v: Self`, `v * 1.0 == v`.
/// - (Distributivity for vector addition) For all `a: f32`, `u, v: Self`, `(u + v) * a == u * a + v * a`.
/// - (Distributivity for scalar addition) For all `a, b: f32`, `v: Self`, `v * (a + b) == v * a + v * b`.
///
/// Note that, because implementing types use floating point arithmetic, they are not required to actually
/// implement `PartialEq` or `Eq`.
pub trait VectorSpace:
Mul<f32, Output = Self>
+ Div<f32, Output = Self>
+ Add<Self, Output = Self>
+ Sub<Self, Output = Self>
+ Neg
+ Default
+ Debug
+ Clone
+ Copy
{
/// The zero vector, which is the identity of addition for the vector space type.
const ZERO: Self;
/// Perform vector space linear interpolation between this element and another, based
/// on the parameter `t`. When `t` is `0`, `self` is recovered. When `t` is `1`, `rhs`
/// is recovered.
///
/// Note that the value of `t` is not clamped by this function, so interpolating outside
/// of the interval `[0,1]` is allowed.
#[inline]
fn lerp(&self, rhs: Self, t: f32) -> Self {
*self * (1. - t) + rhs * t
}
}
```
```rust
/// A type that supports the operations of a normed vector space; i.e. a norm operation in addition
/// to those of [`VectorSpace`]. Specifically, the implementor must guarantee that the following
/// relationships hold, within the limitations of floating point arithmetic:
/// - (Nonnegativity) For all `v: Self`, `v.norm() >= 0.0`.
/// - (Positive definiteness) For all `v: Self`, `v.norm() == 0.0` implies `v == Self::ZERO`.
/// - (Absolute homogeneity) For all `c: f32`, `v: Self`, `(v * c).norm() == v.norm() * c.abs()`.
/// - (Triangle inequality) For all `v, w: Self`, `(v + w).norm() <= v.norm() + w.norm()`.
///
/// Note that, because implementing types use floating point arithmetic, they are not required to actually
/// implement `PartialEq` or `Eq`.
pub trait NormedVectorSpace: VectorSpace {
/// The size of this element. The return value should always be nonnegative.
fn norm(self) -> f32;
/// The squared norm of this element. Computing this is often faster than computing
/// [`NormedVectorSpace::norm`].
#[inline]
fn norm_squared(self) -> f32 {
self.norm() * self.norm()
}
/// The distance between this element and another, as determined by the norm.
#[inline]
fn distance(self, rhs: Self) -> f32 {
(rhs - self).norm()
}
/// The squared distance between this element and another, as determined by the norm. Note that
/// this is often faster to compute in practice than [`NormedVectorSpace::distance`].
#[inline]
fn distance_squared(self, rhs: Self) -> f32 {
(rhs - self).norm_squared()
}
}
```
Furthermore, this PR also demonstrates the use of the
`NormedVectorSpace` combined API to implement `ShapeSample` for
`Triangle2d` and `Triangle3d` simultaneously. Such deduplication is one
of the drivers for developing these APIs.
---
## Changelog
- `Point` from `cubic_splines` becomes `VectorSpace`, exported as
`bevy::math::VectorSpace`.
- `VectorSpace` requires `Neg` and `VectorSpace::ZERO` in addition to
its existing prerequisites.
- Introduced public traits `bevy::math::NormedVectorSpace` for generic
geometry tasks involving vectors.
- Implemented `ShapeSample` for `Triangle2d` and `Triangle3d`.
## Migration Guide
Since `Point` no longer exists, any projects using it must switch to
`bevy::math::VectorSpace`. Additionally, third-party implementations of
this trait now require the `Neg` trait; the constant `VectorSpace::ZERO`
must be provided as well.
---
## Discussion
### Design considerations
Originally, the `NormedVectorSpace::norm` method was part of a separate
trait `Normed`. However, I think that was probably too broad and, more
importantly, the semantics of having it in `NormedVectorSpace` are much
clearer.
As it currently stands, the API exposed here is pretty minimal, and
there is definitely a lot more that we could do, but there are more
questions to answer along the way. As a silly example, we could
implement `NormedVectorSpace::length` as an alias for
`NormedVectorSpace::norm`, but this overlaps with methods in all of the
glam types, so we would want to make sure that the implementations are
effectively identical (for what it's worth, I think they are already).
### Future directions
One example of something that could belong in the `NormedVectorSpace`
API is normalization. Actually, such a thing previously existed on this
branch before I decided to shelve it because of concerns with namespace
collision. It looked like this:
```rust
/// This element, but normalized to norm 1 if possible. Returns an error when the reciprocal of
/// the element's norm is not finite.
#[inline]
#[must_use]
fn normalize(&self) -> Result<Self, NonNormalizableError> {
let reciprocal = 1.0 / self.norm();
if reciprocal.is_finite() {
Ok(*self * reciprocal)
} else {
Err(NonNormalizableError { reciprocal })
}
}
/// An error indicating that an element of a [`NormedVectorSpace`] was non-normalizable due to having
/// non-finite norm-reciprocal.
#[derive(Debug, Error)]
#[error("Element with norm reciprocal {reciprocal} cannot be normalized")]
pub struct NonNormalizableError {
reciprocal: f32
}
```
With this kind of thing in hand, it might be worth considering
eventually making the passage from vectors to directions fully generic
by employing a wrapper type. (Of course, for our concrete types, we
would leave the existing names in place as aliases.) That is, something
like:
```rust
pub struct NormOne<T>
where T: NormedVectorSpace { //... }
```
Utterly separately, the reason that I implemented `ShapeSample` for
`Triangle2d`/`Triangle3d` was to prototype uniform sampling of abstract
meshes, so that's also a future direction.
---------
Co-authored-by: Zachary Harrold <zac@harrold.com.au>
Adopted from and closes https://github.com/bevyengine/bevy/pull/9914 by
@djeedai
# Objective
Fix the use of `TypeRegistry` instead of `TypeRegistryArc` in dynamic
scene and its serializer.
Rename `DynamicScene::serialize_ron()` into `serialize()` to highlight
the fact this is not about serializing to RON specifically, but rather
about serializing to the official Bevy scene format (`.scn` /
`.scn.ron`) which the `SceneLoader` can deserialize (and which happens
to be based in RON, but that not the object here). Also make the link
with the documentation of `SceneLoader` so users understand the full
serializing cycle of a Bevy dynamic scene.
Document `SceneSerializer` with an example showing how to serialize to a
custom format (here: RON), which is easily transposed to serializing
into any other format.
Fixes#9520
## Changelog
### Changed
* `SceneSerializer` and all related serializing helper types now take a
`&TypeRegistry` instead of a `&TypeRegistryArc`. ([SceneSerializer
needlessly uses specifically
&TypeRegistryArc #9520](https://github.com/bevyengine/bevy/issues/9520))
* `DynamicScene::serialize_ron()` was renamed to `serialize()`.
## Migration Guide
* `SceneSerializer` and all related serializing helper types now take a
`&TypeRegistry` instead of a `&TypeRegistryArc`. You can upgrade by
getting the former from the latter with `TypeRegistryArc::read()`,
_e.g._
```diff
let registry_arc: TypeRegistryArc = [...];
- let serializer = SceneSerializer(&scene, ®istry_arc);
+ let registry = registry_arc.read();
+ let serializer = SceneSerializer(&scene, ®istry);
```
* Rename `DynamicScene::serialize_ron()` to `serialize()`.
---------
Co-authored-by: Jerome Humbert <djeedai@gmail.com>
Co-authored-by: Alice Cecile <alice.i.cecil@gmail.com>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
Co-authored-by: James Liu <contact@jamessliu.com>
# Objective
Since it is common to store a pair of width and height as `Vec2`, it
would be useful to have an easy way to instantiate `AspectRatio` from
`Vec2`.
## Solution
Add `impl From<Vec2> for AspectRatio`.
---
## Changelog
- Added `impl From<Vec2> for AspectRatio`
# Objective
Fixes `cargo test -p bevy_math` as in #12729.
## Solution
As described in
[message](https://github.com/bevyengine/bevy/issues/12729#issuecomment-2022197944)
Added workaround `bevy_math = { path = ".", version = "0.14.0-dev",
features = ["approx"] }` to `bevy_math`'s `dev-dependencies`
---------
Co-authored-by: BD103 <59022059+BD103@users.noreply.github.com>
# Objective
- Fixes#12712
## Solution
- Move the `float_ord.rs` file to `bevy_math`
- Change any `bevy_utils::FloatOrd` statements to `bevy_math::FloatOrd`
---
## Changelog
- Moved `FloatOrd` from `bevy_utils` to `bevy_math`
## Migration Guide
- References to `bevy_utils::FloatOrd` should be changed to
`bevy_math::FloatOrd`
# Objective
Resolves#3824. `unsafe` code should be the exception, not the norm in
Rust. It's obviously needed for various use cases as it's interfacing
with platforms and essentially running the borrow checker at runtime in
the ECS, but the touted benefits of Bevy is that we are able to heavily
leverage Rust's safety, and we should be holding ourselves accountable
to that by minimizing our unsafe footprint.
## Solution
Deny `unsafe_code` workspace wide. Add explicit exceptions for the
following crates, and forbid it in almost all of the others.
* bevy_ecs - Obvious given how much unsafe is needed to achieve
performant results
* bevy_ptr - Works with raw pointers, even more low level than bevy_ecs.
* bevy_render - due to needing to integrate with wgpu
* bevy_window - due to needing to integrate with raw_window_handle
* bevy_utils - Several unsafe utilities used by bevy_ecs. Ideally moved
into bevy_ecs instead of made publicly usable.
* bevy_reflect - Required for the unsafe type casting it's doing.
* bevy_transform - for the parallel transform propagation
* bevy_gizmos - For the SystemParam impls it has.
* bevy_assets - To support reflection. Might not be required, not 100%
sure yet.
* bevy_mikktspace - due to being a conversion from a C library. Pending
safe rewrite.
* bevy_dynamic_plugin - Inherently unsafe due to the dynamic loading
nature.
Several uses of unsafe were rewritten, as they did not need to be using
them:
* bevy_text - a case of `Option::unchecked` could be rewritten as a
normal for loop and match instead of an iterator.
* bevy_color - the Pod/Zeroable implementations were replaceable with
bytemuck's derive macros.
# Objective
- `FloatOrd` currently has a different comparison behavior between its
derived `PartialOrd` impl and manually implemented `Ord` impl (The
[`Ord` doc](https://doc.rust-lang.org/std/cmp/trait.Ord.html) says this
is a logic error). This might be a problem for some `std`
containers/algorithms if they rely on both matching, and a footgun for
Bevy users.
## Solution
- Replace the `PartialEq` and `Ord` impls of `FloatOrd` with some
equivalent ones producing [better
assembly.](https://godbolt.org/z/jaWbjnMKx)
- Manually derive `PartialOrd` with the same behavior as `Ord`,
implement the comparison operators.
- Add some tests.
I first tried using a match-based implementation similar to the
`PartialOrd` impl [of the
std](https://doc.rust-lang.org/src/core/cmp.rs.html#1457) (with added
NaN ordering) but I couldn't get it to produce non-branching assembly.
The current implementation is based on [the one from the `ordered_float`
crate](3641f59e31/src/lib.rs (L121)),
adapted since it uses a different ordering. Should this be mentionned
somewhere in the code?
---
## Changelog
### Fixed
- `FloatOrd` now uses the same ordering for its `PartialOrd` and `Ord`
implementations.
## Migration Guide
- If you were depending on the `PartialOrd` behaviour of `FloatOrd`, it
has changed from matching `f32` to matching `FloatOrd`'s `Ord` ordering,
never returning `None`.
# Objective
We have `ReflectSerializer` and `TypedReflectSerializer`. The former is
the one users will most often use since the latter takes a bit more
effort to deserialize.
However, our deserializers are named `UntypedReflectDeserializer` and
`TypedReflectDeserializer`. There is no obvious indication that
`UntypedReflectDeserializer` must be used with `ReflectSerializer` since
the names don't quite match up.
## Solution
Rename `UntypedReflectDeserializer` back to `ReflectDeserializer`
(initially changed as part of #5723).
Also update the docs for both deserializers (as they were pretty out of
date) and include doc examples.
I also updated the docs for the serializers, too, just so that
everything is consistent.
---
## Changelog
- Renamed `UntypedReflectDeserializer` to `ReflectDeserializer`
- Updated docs for `ReflectDeserializer`, `TypedReflectDeserializer`,
`ReflectSerializer`, and `TypedReflectSerializer`
## Migration Guide
`UntypedReflectDeserializer` has been renamed to `ReflectDeserializer`.
Usages will need to be updated accordingly.
```diff
- let reflect_deserializer = UntypedReflectDeserializer::new(®istry);
+ let reflect_deserializer = ReflectDeserializer::new(®istry);
```
# Objective
- Be more explicit in the name of the module for the ui debug overlay
- Avoid confusion and possible overlap with new overlays
## Solution
- Rename `debug_overlay` to `ui_debug_overlay`
# Objective
CI is currently broken because of `DiagnosticsRecorder` not being Send
and Sync as required by Resource.
## Solution
Wrap `DiagnosticsRecorder` internally with a `WgpuWrapper`.
# Objective
- #10572
There is no 2D primitive available for the common shape of an annulus
(ring).
## Solution
This PR introduces a new type to the existing math primitives:
- `Annulus`: the region between two concentric circles
---
## Changelog
### Added
- `Annulus` primitive to the `bevy_math` crate
- `Annulus` tests (`diameter`, `thickness`, `area`, `perimeter` and
`closest_point` methods)
---------
Co-authored-by: Joona Aalto <jondolf.dev@gmail.com>
# Objective
I found that some .rs files are unnecessarily executable.
Rust source files may start with a shebang-like statement `#!`, so let's
make sure they are not executable just in case.
Here is the result of the `find` commend that lists executable .rs files
as of main branch `86bd648`.
```console
$ find -name \*.rs -type f -executable
./crates/bevy_gizmos/src/lib.rs
./crates/bevy_tasks/src/lib.rs
./crates/bevy_time/src/lib.rs
./crates/bevy_transform/src/lib.rs
./src/lib.rs
```
It appears that the permissions of those files were originally 644, but
were unexpectedly changed to 755 by commit
52e3f2007b.
## Solution
Make them not executable by using this command;
`find -name \*.rs -type f -executable -exec chmod --verbose a-x -- {}
\+`
# Objective
Fix the regression for Root Node's Layout behavior introduced in
https://github.com/bevyengine/bevy/pull/12268
- Add regression test for Root Node Layout's behaving as they did before
0.13.1
- Restore pre 0.13.1 Root Node Layout behavior (fixes
https://github.com/bevyengine/bevy/issues/12624)
## Solution
This implements [@nicoburns suggestion
](https://discord.com/channels/691052431525675048/743663673393938453/1221593626476548146),
where instead of adding the camera to the taffy node tree, we revert
back to adding a new "parent" node for each root node while maintaining
their relationship with the camera.
> If you can do the ecs change detection to move the node to the correct
Taffy instance for the camera then you should also be able to move it to
a `Vec` of root nodes for that camera.
---
## Changelog
Fixed https://github.com/bevyengine/bevy/issues/12624 - Restores pre
0.13.1 Root Node Layout behavior
## Migration Guide
If you were affected by the 0.13.1 regression and added `position_type:
Absolute` to all your root nodes you might be able to reclaim some LOC
by removing them now that the 0.13 behavior is restored.
# Objective
- Adds line styles to bevy gizmos, suggestion of #9400
- Currently solid and dotted lines are implemented but this can easily
be extended to support dashed lines as well if that is wanted.
## Solution
- Adds the enum `GizmoLineStyle` and uses it in each `GizmoConfig` to
configure the style of the line.
- Each "dot" in a dotted line has the same width and height as the
`line_width` of the corresponding line.
---
## Changelog
- Added `GizmoLineStyle` to `bevy_gizmos`
- Added a `line_style: GizmoLineStyle ` attribute to `GizmoConfig`
- Updated the `lines.wgsl` shader and the pipelines accordingly.
## Migration Guide
- Any manually created `GizmoConfig` must now include the `line_style`
attribute
## Additional information
Some pretty pictures :)
This is the 3d_gizmos example with/without `line_perspective`:
<img width="1440" alt="Screenshot 2024-03-09 at 23 25 53"
src="https://github.com/bevyengine/bevy/assets/62256001/b1b97311-e78d-4de3-8dfe-9e48a35bb27d">
<img width="1440" alt="Screenshot 2024-03-09 at 23 25 39"
src="https://github.com/bevyengine/bevy/assets/62256001/50ee8ecb-5290-484d-ba36-7fd028374f7f">
And the 2d example:
<img width="1440" alt="Screenshot 2024-03-09 at 23 25 06"
src="https://github.com/bevyengine/bevy/assets/62256001/4452168f-d605-4333-bfa5-5461d268b132">
---------
Co-authored-by: BD103 <59022059+BD103@users.noreply.github.com>
# Objective
This gets Bevy building on Wasm when the `atomics` flag is enabled. This
does not yet multithread Bevy itself, but it allows Bevy users to use a
crate like `wasm_thread` to spawn their own threads and manually
parallelize work. This is a first step towards resolving #4078 . Also
fixes#9304.
This provides a foothold so that Bevy contributors can begin to think
about multithreaded Wasm's constraints and Bevy can work towards changes
to get the engine itself multithreaded.
Some flags need to be set on the Rust compiler when compiling for Wasm
multithreading. Here's what my build script looks like, with the correct
flags set, to test out Bevy examples on web:
```bash
set -e
RUSTFLAGS='-C target-feature=+atomics,+bulk-memory,+mutable-globals' \
cargo build --example breakout --target wasm32-unknown-unknown -Z build-std=std,panic_abort --release
wasm-bindgen --out-name wasm_example \
--out-dir examples/wasm/target \
--target web target/wasm32-unknown-unknown/release/examples/breakout.wasm
devserver --header Cross-Origin-Opener-Policy='same-origin' --header Cross-Origin-Embedder-Policy='require-corp' --path examples/wasm
```
A few notes:
1. `cpal` crashes immediately when the `atomics` flag is set. That is
patched in https://github.com/RustAudio/cpal/pull/837, but not yet in
the latest crates.io release.
That can be temporarily worked around by patching Cpal like so:
```toml
[patch.crates-io]
cpal = { git = "https://github.com/RustAudio/cpal" }
```
2. When testing out `wasm_thread` you need to enable the `es_modules`
feature.
## Solution
The largest obstacle to compiling Bevy with `atomics` on web is that
`wgpu` types are _not_ Send and Sync. Longer term Bevy will need an
approach to handle that, but in the near term Bevy is already configured
to be single-threaded on web.
Therefor it is enough to wrap `wgpu` types in a
`send_wrapper::SendWrapper` that _is_ Send / Sync, but panics if
accessed off the `wgpu` thread.
---
## Changelog
- `wgpu` types that are not `Send` are wrapped in
`send_wrapper::SendWrapper` on Wasm + 'atomics'
- CommandBuffers are not generated in parallel on Wasm + 'atomics'
## Questions
- Bevy should probably add CI checks to make sure this doesn't regress.
Should that go in this PR or a separate PR? **Edit:** Added checks to
build Wasm with atomics
---------
Co-authored-by: François <mockersf@gmail.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: daxpedda <daxpedda@gmail.com>
Co-authored-by: François <francois.mockers@vleue.com>
# Objective
This PR fixes#12125
## Solution
The logic in this PR was borrowed from gloo-net and essentially probes
the global Javascript context to see if we are in a window or a worker
before calling `fetch_with_str`.
---------
Co-authored-by: Zachary Harrold <zac@harrold.com.au>
# Objective
Currently the built docs only shows the logo and favicon for the top
level `bevy` crate. This makes views like
https://docs.rs/bevy_ecs/latest/bevy_ecs/ look potentially unrelated to
the project at first glance.
## Solution
Reproduce the docs attributes for every crate that Bevy publishes.
Ideally this would be done with some workspace level Cargo.toml control,
but AFAICT, such support does not exist.
# Objective
Make it easy to get the ids of all the components in a bundle (and
initialise any components not yet initialised). This is fairly similar
to the `Bundle::get_component_ids()` method added in the observers PR
however that will return none for any non-initialised components. This
is exactly the API space covered by `Bundle::component_ids()` however
that isn't possible to call outside of `bevy_ecs` as it requires `&mut
Components` and `&mut Storages`.
## Solution
Added `World.init_bundle<B: Bundle>()` which similarly to
`init_component` and `init_resource`, initialises all components in the
bundle and returns a vector of their component ids.
---
## Changelog
Added the method `init_bundle` to `World` as a counterpart to
`init_component` and `init_resource`.
---------
Co-authored-by: James Liu <contact@jamessliu.com>
# Objective
- Add serialize feature to bevy_color
- "Fixes #12527".
## Solution
- Added feature for serialization
---
## Changelog
- Serde serialization is now optional, with flag 'serialize'
## Migration Guide
- If user wants color data structures to be serializable, then
application needs to be build with flag 'serialize'
# Objective
- Tiny PR to clarify that `self.world.bundles.init_info::<T>` must have
been called so that the BundleInfo is present in the World
---------
Co-authored-by: James Liu <contact@jamessliu.com>
# Objective
We already collect a lot of system information on startup when possible
but we don't make this information available. With the upcoming work on
a diagnostic overlay it would be useful to be able to display this
information.
## Solution
Make the already existing SystemInfo a Resource
---
## Changelog
Added `SystemInfo` Resource
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Afonso Lage <lage.afonso@gmail.com>
# Objective
get_asset_paths tries to check whether a folder is empty, and if so
delete it. However rather than checking whether any subfolder contains
files it checks whether _all_ subfolders have files.
Also cleanup various BoxedFutures in async recursive functions like
these, rust 1.77 now allows recursive async functions (albeit still by
boxing), hurray! This is a followup to #12550 (sorta). More BoxedFuture
stuff can be removed now that rust 1.77 is out, which can use async
recursive functions! This is mainly just cleaner code wise - the
recursion still boxes the future so not much to win there.
PR is mainly whitespace changes so do disable whitespace diffs for
easier review.
# Objective
Follow up from PR #12369 to extract lighting structs from light/mod.rs
into their own file.
Part of the Purdue Refactoring Team's goals issue #12349
## Solution
- Moved PointLight from light/mod.rs to light/point_light.rs
- Moved SpotLight from light/mod.rs to light/spot_light.rs
- Moved DirectionalLight from light/mod.rs to light/directional_light.rs
# Objective
Remove color specialization from `SpritePipeline` after it became
useless in #9597
## Solution
Removed the `COLORED` flag from the pipeline key and removed the
specializing the pipeline over it.
---
## Changelog
### Removed
- `SpritePipelineKey` no longer contains the `COLORED` flag. The flag
has had no effect on how the pipeline operates for a while.
## Migration Guide
- The raw values for the `HDR`, `TONEMAP_IN_SHADER` and `DEBAND_DITHER`
flags have changed, so if you were constructing the pipeline key from
raw `u32`s you'll have to account for that.
# Objective
I was reading some of the Archetype and Bundle code and was getting
confused a little bit in some places (is the `archetype_id` in
`AddBundle` the source or the target archetype id?).
Small PR that adds some docstrings to make it easier for first-time
readers.
# Objective
* Adopted #12025 to fix merge conflicts
* In some cases we used manual impls for certain types, though they are
(at least, now) unnecessary.
## Solution
* Use macros and reflecting-by-value to avoid this clutter.
* Though there were linker issues with Reflect and the CowArc in
AssetPath (see https://github.com/bevyengine/bevy/issues/9747), I
checked these are resolved by using #[reflect_value].
---------
Co-authored-by: soqb <cb.setho@gmail.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: James Liu <contact@jamessliu.com>
# Objective
- Clarify that `ButtonInput::just_release` and
`ButtonInput::just_pressed` don't imply information about the state of
`ButtonInput::pressed` or their counterparts.
Fixes#12600
## Solution
Removed Into<AssetId<T>> for Handle<T> as proposed in Issue
conversation, fixed dependent code
## Migration guide
If you use passing Handle by value as AssetId, you should pass reference
or call .id() method on it
Before (0.13):
`assets.insert(handle, value);`
After (0.14):
`assets.insert(&handle, value);`
or
`assets.insert(handle.id(), value);`
# Objective
- Implements maths and `Animatable` for `Srgba` as suggested
[here](https://github.com/bevyengine/bevy/issues/12617#issuecomment-2013494774).
## Solution
- Implements `Animatable` and maths for `Srgba` just like their
implemented for other colors.
---
## Changelog
- Updated the example to mention `Srgba`.
## Migration Guide
- The previously existing implementation of mul/div for `Srgba` did not
modify `alpha` but these operations do modify `alpha` now. Users need to
be aware of this change.
# Objective
- Allow registering of systems from Commands with
`Commands::register_one_shot_system`
- Make registering of one shot systems more easy
## Solution
- Add the Command `RegisterSystem` for Commands use.
- Creation of SystemId based on lazy insertion of the System
- Changed the privacy of the fields in SystemId so Commands can return
the SystemId
---
## Changelog
### Added
- Added command `RegisterSystem`
- Added function `Commands::register_one_shot_system`
- Added function `App::register_one_shot_system`
### Changed
- Changed the privacy and the type of struct tuple to regular struct of
SystemId
## Migration Guide
- Changed SystemId fields from tuple struct to a normal struct
If you want to access the entity field, you should use
`SystemId::entity` instead of `SystemId::0`
## Showcase
> Before, if you wanted to register a system with `Commands`, you would
need to do:
```rust
commands.add(|world: &mut World| {
let id = world.register_system(your_system);
// You would need to insert the SystemId inside an entity or similar
})
```
> Now, you can:
```rust
let id = commands.register_one_shot_system(your_system);
// Do what you want with the Id
```
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Pablo Reinhardt <pabloreinhardt@gmail.com>
# Context
[GitHub Discussion
Link](https://github.com/bevyengine/bevy/discussions/12506)
# Objective
- **Clarity:** More explicit representation of a common geometric
primitive.
- **Convenience:** Provide methods tailored to 3D triangles (area,
perimeters, etc.).
## Solution
- Adding the `Triangle3d` primitive into the `bevy_math` crate.
---
## Changelog
### Added
- `Triangle3d` primitive to the `bevy_math` crate
### Changed
- `Triangle2d::reverse`: the first and last vertices are swapped instead
of the second and third.
---------
Co-authored-by: Miles Silberling-Cook <NthTensor@users.noreply.github.com>
Co-authored-by: Joona Aalto <jondolf.dev@gmail.com>
# Objective
I'm reading through the ecs query code for the first time, and updating
the docs:
- fixed some typos
- added some docs about things I was confused about (in particular what
the difference between `matches_component_set` and
`update_component_access` was)
# Objective
Fixes#12200 .
## Solution
I added a Hue Trait with the rotate_hue method to enable hue rotation.
Additionally, I modified the implementation of animations in the
animated_material sample.
---
## Changelog
- Added a `Hue` trait to `bevy_color/src/color_ops.rs`.
- Added the `Hue` trait implementation to `Hsla`, `Hsva`, `Hwba`,
`Lcha`, and `Oklcha`.
- Updated animated_material sample.
## Migration Guide
Users of Oklcha need to change their usage to use the with_hue method
instead of the with_h method.
---------
Co-authored-by: Pablo Reinhardt <126117294+pablo-lua@users.noreply.github.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Fixes#12202
## Solution
- Implements `Animatable` for all color types implementing arithmetic
operations.
- the colors returned by `Animatable`s methods are already clamped.
- Adds a `color_animation.rs` example.
- Implements the `*Assign` operators for color types that already had
the corresponding operators. This is just a 'nice to have' and I am
happy to remove this if it's not wanted.
---
## Changelog
- `bevy_animation` now depends on `bevy_color`.
- `LinearRgba`, `Laba`, `Oklaba` and `Xyza` implement `Animatable`.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Zachary Harrold <zac@harrold.com.au>
# Objective
- It can be useful to have access to the path of the current asset being
processed, for example if you want to need a second file that is
relative to the current file being processed.
## Solution
- I added a `path()` function to the `ProcessContext`
# Objective
- Fixes#12570
## Solution
Previously, cardinal splines constructed by `CubicCardinalSpline` would
leave out their endpoints when constructing the cubic curve segments
connecting their points. (See the linked issue for details.)
Now, cardinal splines include the endpoints. For instance, the provided
usage example
```rust
let points = [
vec2(-1.0, -20.0),
vec2(3.0, 2.0),
vec2(5.0, 3.0),
vec2(9.0, 8.0),
];
let cardinal = CubicCardinalSpline::new(0.3, points).to_curve();
let positions: Vec<_> = cardinal.iter_positions(100).collect();
```
will actually produce a spline that connects all four of these points
instead of just the middle two "interior" points.
Internally, this is achieved by duplicating the endpoints of the vector
of control points before performing the construction of the associated
`CubicCurve`. This amounts to specifying that the tangents at the
endpoints `P_0` and `P_n` (say) should be parallel to `P_1 - P_0` and
`P_n - P_{n-1}`.
---
## Migration Guide
Any users relying on the old behavior of `CubicCardinalSpline` will have
to truncate any parametrizations they used in order to access a curve
identical to the one they had previously. This would be done by chopping
off a unit-distance segment from each end of the parametrizing interval.
For instance, if a user's existing code looks as follows
```rust
fn interpolate(t: f32) -> Vec2 {
let points = [
vec2(-1.0, -20.0),
vec2(3.0, 2.0),
vec2(5.0, 3.0),
vec2(9.0, 8.0),
];
let my_curve = CubicCardinalSpline::new(0.3, points).to_curve();
my_curve.position(t)
}
```
then in order to obtain similar behavior, `t` will need to be shifted up
by 1, since the output of `CubicCardinalSpline::to_curve` has introduced
a new segment in the interval [0,1], displacing the old segment from
[0,1] to [1,2]:
```rust
fn interpolate(t: f32) -> Vec2 {
let points = [
vec2(-1.0, -20.0),
vec2(3.0, 2.0),
vec2(5.0, 3.0),
vec2(9.0, 8.0),
];
let my_curve = CubicCardinalSpline::new(0.3, points).to_curve();
my_curve.position(t+1)
}
```
(Note that this does not provide identical output for values of `t`
outside of the interval [0,1].)
On the other hand, any user who was specifying additional endpoint
tangents simply to get the curve to pass through the right points (i.e.
not requiring exactly the same output) can simply omit the endpoints
that were being supplied only for control purposes.
---
## Discussion
### Design considerations
This is one of the two approaches outlined in #12570 — in this PR, we
are basically declaring that the docs are right and the implementation
was flawed.
One semi-interesting question is how the endpoint tangents actually
ought to be defined when we include them, and another option considered
was mirroring the control points adjacent to the endpoints instead of
duplicating them, which would have had the advantage that the expected
length of the corresponding difference should be more similar to that of
the other difference-tangents, provided that the points are equally
spaced.
In this PR, the duplication method (which produces smaller tangents) was
chosen for a couple reasons:
- It seems to be more standard
- It is exceptionally simple to implement
- I was a little concerned that the aforementioned alternative would
result in some over-extrapolation
### An annoyance
If you look at the code, you'll see I was unable to find a satisfactory
way of doing this without allocating a new vector. This doesn't seem
like a big problem given the context, but it does bother me. In
particular, if there is some easy parallel to `slice::windows` for
iterators that doesn't pull in an external dependency, I would love to
know about it.
# Objective
Lets say I have the following `.meta` file:
```RON
(
meta_format_version: "1.0",
asset: Ignore,
)
```
When a file is inside the `assets` directory and processing is enabled,
the processor will copy the file into `imported_assets` although it
should be ignored and therefore not copied.
## Solution
- I added a simple check that does not copy the assets if the
AssetAction is `Ignore`.
## Migration Guide
- The public `ProcessResult` enum now has a `ProcessResult::Ignore`
variant that must be handled.
# Objective
Fix Pr CI failing over dead code in tests and main branch CI failing
over a missing semicolon. Fixes#12620.
## Solution
Add dead_code annotations and a semicolon.
# Objective
- #12500 use the primary window resolution to do all its calculation.
This means bad support for multiple windows or multiple ui camera
## Solution
- Use camera driven UI (https://github.com/bevyengine/bevy/pull/10559)
# Objective
- since #12500, text is a little bit more gray in UI
## Solution
- don't multiply color by alpha. I think this was done in the original
PR (#8973) for shadows which were not added in #12500
# Objective
- Currently the fps_overlay affects any other ui node spawned. This
should not happen
## Solution
- Use position absolute and a ZIndex of `i32::MAX - 32`
- I also modified the example a little bit to center it correctly. It
only worked previously because the overlay was pushing it down. I also
took the opportunity to simplify the text spawning code a little bit.
# Objective
- #12500 broke images and background colors in UI. Try examples
`overflow`, `ui_scaling` or `ui_texture_atlas`
## Solution
- Makes the component `BorderRadius` optional in the query, as it's not
always present. Use `[0.; 4]` as border radius in the extracted node
when none was found
# Objective
Fixes#12224.
## Solution
- Expand `with_` methods for the `Oklch` to their full names.
- Expand `l` to `lightness` in `Oklaba` comments.
## Migration Guide
The following methods have been renamed for the `Oklch` color space:
- `with_l` -> `with_lightness`.
- `with_c` -> `with_chroma`.
- `with_h` -> `with_hue`.
# Objective
- Many types in bevy_render doesn't reflect Default even if it could.
## Solution
- Reflect it.
---
---------
Co-authored-by: Pablo Reinhardt <pabloreinhardt@gmail.com>
# Objective
- Fixes#12202
## Solution
- This PR implements componentwise (including alpha) addition,
subtraction and scalar multiplication/division for some color types.
- The mentioned color types are `Laba`, `Oklaba`, `LinearRgba` and
`Xyza` as all of them are either physically or perceptually linear as
mentioned by @alice-i-cecile in the issue.
---
## Changelog
- Scalar mul/div for `LinearRgba` may modify alpha now.
## Migration Guide
- Users of scalar mul/div for `LinearRgba` need to be aware of the
change and maybe use the `.clamp()` methods or manually set the `alpha`
channel.
# Objective
Implements border radius for UI nodes. Adopted from #8973, but excludes
shadows.
## Solution
- Add a component `BorderRadius` which contains a radius value for each
corner of the UI node.
- Use a fragment shader to generate the rounded corners using a signed
distance function.
<img width="50%"
src="https://github.com/bevyengine/bevy/assets/26204416/16b2ba95-e274-4ce7-adb2-34cc41a776a5"></img>
## Changelog
- `BorderRadius`: New component that holds the border radius values.
- `NodeBundle` & `ButtonBundle`: Added a `border_radius: BorderRadius`
field.
- `extract_uinode_borders`: Stripped down, most of the work is done in
the shader now. Borders are no longer assembled from multiple rects,
instead the shader uses a signed distance function to draw the border.
- `UiVertex`: Added size, border and radius fields.
- `UiPipeline`: Added three vertex attributes to the vertex buffer
layout, to accept the UI node's size, border thickness and border
radius.
- Examples: Added rounded corners to the UI element in the `button`
example, and a `rounded_borders` example.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Zachary Harrold <zac@harrold.com.au>
Co-authored-by: Pablo Reinhardt <126117294+pablo-lua@users.noreply.github.com>
# Objective
- Allow configuring of platform-specific panic handlers.
- Remove the silent overwrite of the WASM panic handler
- Closes#12546
## Solution
- Separates the panic handler to a new plugin, `PanicHandlerPlugin`.
- `PanicHandlerPlugin` was added to `DefaultPlugins`.
- Can be disabled on `DefaultPlugins`, in the case someone needs to
configure custom panic handlers.
---
## Changelog
### Added
- A `PanicHandlerPlugin` was added to the `DefaultPlugins`, which now
sets sensible target-specific panic handlers.
### Changed
- On WASM, the panic stack trace was output to the console through the
`BevyLogPlugin`. Since this was separated out into `PanicHandlerPlugin`,
you may need to add the new `PanicHandlerPlugin` (included in
`DefaultPlugins`).
## Migration Guide
- If you used `MinimalPlugins` with `LogPlugin` for a WASM-target build,
you will need to add the new `PanicHandlerPlugin` to set the panic
behavior to output to the console. Otherwise, you will see the default
panic handler (opaque, `unreachable` errors in the console).
# Objective
- This is an adopted version of #10420
- The objective is to help debugging the Ui layout tree with helpful
outlines, that can be easily enabled/disabled
## Solution
- Like #10420, the solution is using the bevy_gizmos in outlining the
nodes
---
## Changelog
### Added
- Added debug_overlay mod to `bevy_dev_tools`
- Added bevy_ui_debug feature to `bevy_dev_tools`
## How to use
- The user must use `bevy_dev_tools` feature in TOML
- The user must use the plugin UiDebugPlugin, that can be found on
`bevy::dev_tools::debug_overlay`
- Finally, to enable the function, the user must set
`UiDebugOptions::enabled` to true
Someone can easily toggle the function with something like:
```rust
fn toggle_overlay(input: Res<ButtonInput<KeyCode>>, options: ResMut<UiDebugOptions>) {
if input.just_pressed(KeyCode::Space) {
// The toggle method will enable if disabled and disable if enabled
options.toggle();
}
}
```
Note that this feature can be disabled from dev_tools, as its in fact
behind a default feature there, being the feature bevy_ui_debug.
# Limitations
Currently, due to limitations with gizmos itself, it's not possible to
support this feature to more the one window, so this tool is limited to
the primary window only.
# Showcase
Ui example with debug_overlay enabled
And disabled
---------
Co-authored-by: Nicola Papale <nico@nicopap.ch>
Co-authored-by: Pablo Reinhardt <pabloreinhardt@gmail.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Give Bevy a well-designed built-in color palette for users to use while
prototyping or authoring Bevy examples.
## Solution
Generate
([playground](https://play.rust-lang.org/?version=stable&mode=debug&edition=2021&gist=f7b3a3002fb7727db15c1197e0a1a373),
[gist](https://gist.github.com/rust-play/f7b3a3002fb7727db15c1197e0a1a373))
consts from [Tailwind](https://tailwindcss.com/docs/customizing-colors)
(mit license) json.
## Discussion
Are there other popular alternatives we should be looking at? Something
new and fancy involving a really long acronym like CIELUVLCh? I'm not a
tailwind user or color expert, but I really like the way it's broken up
into distinct but plentiful hue and lightness groups.
It beats needing some shades of red, scrolling through the [current
palette](https://docs.rs/bevy/latest/bevy/prelude/enum.Color.html),
choosing a few of `CRIMSON`, `MAROON`, `RED`, `TOMATO` at random and
calling it a day.
The best information I was able to dig up about the Tailwind palette is
from this thread:
https://twitter.com/steveschoger/status/1303795136703410180. Here are
some key excerpts:
> Tried to the "perceptually uniform" thing for Tailwind UI.
> Ultimately, it just resulted in a bunch of useless shades for colors
like yellow and green that are inherently brighter.
> With that said you're guaranteed to get a contrast ratio of 4.5:1 when
using any 700 shade (in some cases 600) on a 100 shade of the same hue.
> We just spent a lot of time looking at sites to figure out which
colors are popular and tried to fill all the gaps.
> Even the lime green is questionable but felt there needed to be
something in between the jump from yellow to green 😅
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Simplify implementing some asset traits without Box::pin(async move{})
shenanigans.
Fixes (in part) https://github.com/bevyengine/bevy/issues/11308
## Solution
Use async-fn in traits when possible in all traits. Traits with return
position impl trait are not object safe however, and as AssetReader and
AssetWriter are both used with dynamic dispatch, you need a Boxed
version of these futures anyway.
In the future, Rust is [adding
](https://blog.rust-lang.org/2023/12/21/async-fn-rpit-in-traits.html)proc
macros to generate these traits automatically, and at some point in the
future dyn traits should 'just work'. Until then.... this seemed liked
the right approach given more ErasedXXX already exist, but, no clue if
there's plans here! Especially since these are public now, it's a bit of
an unfortunate API, and means this is a breaking change.
In theory this saves some performance when these traits are used with
static dispatch, but, seems like most code paths go through dynamic
dispatch, which boxes anyway.
I also suspect a bunch of the lifetime annotations on these function
could be simplified now as the BoxedFuture was often the only thing
returned which needed a lifetime annotation, but I'm not touching that
for now as traits + lifetimes can be so tricky.
This is a revival of
[pull/11362](https://github.com/bevyengine/bevy/pull/11362) after a
spectacular merge f*ckup, with updates to the latest Bevy. Just to recap
some discussion:
- Overall this seems like a win for code quality, especially when
implementing these traits, but a loss for having to deal with ErasedXXX
variants.
- `ConditionalSend` was the preferred name for the trait that might be
Send, to deal with wasm platforms.
- When reviewing be sure to disable whitespace difference, as that's 95%
of the PR.
## Changelog
- AssetReader, AssetWriter, AssetLoader, AssetSaver and Process now use
async-fn in traits rather than boxed futures.
## Migration Guide
- Custom implementations of AssetReader, AssetWriter, AssetLoader,
AssetSaver and Process should switch to async fn rather than returning a
bevy_utils::BoxedFuture.
- Simultaniously, to use dynamic dispatch on these traits you should
instead use dyn ErasedXXX.
# Objective
- Not all materials need shadow, but a queue_shadows system is always
added to the `Render` schedule and executed
## Solution
- Make a setting for shadows, it defaults to true
## Changelog
- Added `shadows_enabled` setting to `MaterialPlugin`
## Migration Guide
- `MaterialPlugin` now has a `shadows_enabled` setting, if you didn't
spawn the plugin using `::default()` or `..default()`, you'll need to
set it. `shadows_enabled: true` is the same behavior as the previous
version, and also the default value.
# Objective
Currently in order to retrieve the inner values from direction types is
that you need to use the `Deref` trait or `From`/`Into`. `Deref` that is
currently implemented is an anti-pattern that I believe should be less
relied upon.
This pull-request add getters for retrieving the inner values for
direction types.
Advantages of getters:
- Let rust-analyzer to list out available methods for users to
understand better to on how to get the inner value. (This happens to me.
I really don't know how to get the value until I look through the source
code.)
- They are simple.
- Generally won't be ambiguous in most context. Traits such as
`From`/`Into` will require fully qualified syntax from time to time.
- Unsurprising result.
Disadvantages of getters:
- More verbose
Advantages of deref polymorphism:
- You reduce boilerplate for getting the value and call inner methods
by:
```rust
let dir = Dir3::new(Vec3::UP).unwrap();
// getting value
let value = *dir;
// instead of using getters
let value = dir.vec3();
// calling methods for the inner vector
dir.xy();
// instead of using getters
dir.vec3().xy();
```
Disadvantages of deref polymorphism:
- When under more level of indirection, it will requires more
dereferencing which will get ugly in some part:
```rust
// getting value
let value = **dir;
// instead of using getters
let value = dir.vec3();
// calling methods for the inner vector
dir.xy();
// instead of using getters
dir.vec3().xy();
```
[More detail
here](https://rust-unofficial.github.io/patterns/anti_patterns/deref.html).
Edit: Update information for From/Into trait.
Edit: Advantages and disadvantages.
## Solution
Add `vec2` method for Dir2.
Add `vec3` method for Dir3.
Add `vec3a` method for Dir3A.
# Objective
prevent gpu buffer allocations when running `as_bind_group` for assets
with texture dependencies that are not yet available.
## Solution
reorder the binding creation so that fallible items are created first.
# Objective
Resolves#12431.
## Solution
Added a `skip_taskbar` field to the `Window` struct (defaults to
`false`). Used in `create_windows` if the target OS is Windows.
Updates the requirements on
[base64](https://github.com/marshallpierce/rust-base64) to permit the
latest version.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/marshallpierce/rust-base64/blob/master/RELEASE-NOTES.md">base64's
changelog</a>.</em></p>
<blockquote>
<h1>0.22.0</h1>
<ul>
<li><code>DecodeSliceError::OutputSliceTooSmall</code> is now
conservative rather than precise. That is, the error will only occur if
the decoded output <em>cannot</em> fit, meaning that
<code>Engine::decode_slice</code> can now be used with exactly-sized
output slices. As part of this, <code>Engine::internal_decode</code> now
returns <code>DecodeSliceError</code> instead of
<code>DecodeError</code>, but that is not expected to affect any
external callers.</li>
<li><code>DecodeError::InvalidLength</code> now refers specifically to
the <em>number of valid symbols</em> being invalid (i.e. <code>len % 4
== 1</code>), rather than just the number of input bytes. This avoids
confusing scenarios when based on interpretation you could make a case
for either <code>InvalidLength</code> or <code>InvalidByte</code> being
appropriate.</li>
<li>Decoding is somewhat faster (5-10%)</li>
</ul>
<h1>0.21.7</h1>
<ul>
<li>Support getting an alphabet's contents as a str via
<code>Alphabet::as_str()</code></li>
</ul>
<h1>0.21.6</h1>
<ul>
<li>Improved introductory documentation and example</li>
</ul>
<h1>0.21.5</h1>
<ul>
<li>Add <code>Debug</code> and <code>Clone</code> impls for the general
purpose Engine</li>
</ul>
<h1>0.21.4</h1>
<ul>
<li>Make <code>encoded_len</code> <code>const</code>, allowing the
creation of arrays sized to encode compile-time-known data lengths</li>
</ul>
<h1>0.21.3</h1>
<ul>
<li>Implement <code>source</code> instead of <code>cause</code> on Error
types</li>
<li>Roll back MSRV to 1.48.0 so Debian can continue to live in a time
warp</li>
<li>Slightly faster chunked encoding for short inputs</li>
<li>Decrease binary size</li>
</ul>
<h1>0.21.2</h1>
<ul>
<li>Rollback MSRV to 1.57.0 -- only dev dependencies need 1.60, not the
main code</li>
</ul>
<h1>0.21.1</h1>
<ul>
<li>Remove the possibility of panicking during decoded length
calculations</li>
<li><code>DecoderReader</code> no longer sometimes erroneously ignores
padding <a
href="https://redirect.github.com/marshallpierce/rust-base64/issues/226">#226</a></li>
</ul>
<h2>Breaking changes</h2>
<ul>
<li><code>Engine.internal_decode</code> return type changed</li>
<li>Update MSRV to 1.60.0</li>
</ul>
<h1>0.21.0</h1>
<h2>Migration</h2>
<h3>Functions</h3>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="5d70ba7576"><code>5d70ba7</code></a>
Merge pull request <a
href="https://redirect.github.com/marshallpierce/rust-base64/issues/269">#269</a>
from marshallpierce/mp/decode-precisely</li>
<li><a
href="efb6c006c7"><code>efb6c00</code></a>
Release notes</li>
<li><a
href="2b91084a31"><code>2b91084</code></a>
Add some tests to boost coverage</li>
<li><a
href="9e9c7abe65"><code>9e9c7ab</code></a>
Engine::internal_decode now returns DecodeSliceError</li>
<li><a
href="a8a60f43c5"><code>a8a60f4</code></a>
Decode main loop improvements</li>
<li><a
href="a25be0667c"><code>a25be06</code></a>
Simplify leftover output writes</li>
<li><a
href="9979cc33bb"><code>9979cc3</code></a>
Keep morsels as separate bytes</li>
<li><a
href="37670c5ec2"><code>37670c5</code></a>
Bump dev toolchain version (<a
href="https://redirect.github.com/marshallpierce/rust-base64/issues/268">#268</a>)</li>
<li><a
href="9652c78773"><code>9652c78</code></a>
v0.21.7</li>
<li><a
href="08deccf703"><code>08deccf</code></a>
provide as_str() method to return the alphabet characters (<a
href="https://redirect.github.com/marshallpierce/rust-base64/issues/264">#264</a>)</li>
<li>Additional commits viewable in <a
href="https://github.com/marshallpierce/rust-base64/compare/v0.21.5...v0.22.0">compare
view</a></li>
</ul>
</details>
<br />
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Objective
Fixes#12549. WorldCell's support of everything a World can do is
incomplete, and represents an alternative, potentially confusing, and
less performant way of pulling multiple fetches from a `World`. The
typical approach is to use `SystemState` for a runtime cached and safe
way, or `UnsafeWorldCell` if the use of `unsafe` is tolerable.
## Solution
Remove it!
---
## Changelog
Removed: `WorldCell`
Removed: `World::cell`
## Migration Guide
`WorldCell` has been removed. If you were using it to fetch multiple
distinct values from a `&mut World`, use `SystemState` by calling
`SystemState::get` instead. Alternatively, if `SystemState` cannot be
used, `UnsafeWorldCell` can instead be used in unsafe contexts.
# Objective
- working with UI components in Bevy, I found myself wanting some of
these common traits, like `PartialEq` for comparing simple types
## Solution
- I added only (hopefully) uncontroversial `derive`s for some common UI
types
Note that many types, unfortunately, can't have `PartialEq` `derive`d
for them, because they contain `f32`s and / or `Vec`s.
# Objective
I wanted to have reflection for BinaryHeap for a personal project.
I'm running into some issues:
- I wanted to represent BinaryHeap as a reflect::List type since it's
essentially a wrapper around a Vec, however there's no public way to
access the underlying Vec, which makes it hard to implement the
reflect::List methods. I have omitted the reflect::List methods for
now.. I'm not sure if that's a blocker?
- what would be the alternatives? Simply not implement `reflect::List`?
It is possible to implement `FromReflect` without it. Would the type be
`Struct` then?
---------
Co-authored-by: Charles Bournhonesque <cbournhonesque@snapchat.com>
# Objective
Provide component access to `&'w T`, `Ref<'w, T>`, `Mut<'w, T>`,
`Ptr<'w>` and `MutUntyped<'w>` from `EntityMut<'w>`/`EntityWorldMut<'w>`
with the world `'w` lifetime instead of `'_`.
Fixes#12417
## Solution
Add `into_` prefixed methods for `EntityMut<'w>`/`EntityWorldMut<'w>`
that consume `self` and returns component access with the world `'w`
lifetime unlike the `get_` prefixed methods that takes `&'a self` and
returns component access with `'a` lifetime.
Methods implemented:
- EntityMut::into_borrow
- EntityMut::into_ref
- EntityMut::into_mut
- EntityMut::into_borrow_by_id
- EntityMut::into_mut_by_id
- EntityWorldMut::into_borrow
- EntityWorldMut::into_ref
- EntityWorldMut::into_mut
- EntityWorldMut::into_borrow_by_id
- EntityWorldMut::into_mut_by_id
# Objective
fix#12344
## Solution
use existing machinery in track_assets to determine if the asset is
unused before firing Asset::Unused event
~~most extract functions use `AssetEvent::Removed` to schedule deletion
of render world resources. `RenderAssetPlugin` was using
`AssetEvent::Unused` instead.
`Unused` fires when the last strong handle is dropped, even if a new one
is created. `Removed` only fires when a new one is not created.
as far as i can see, `Unused` is the same as `Removed` except for this
"feature", and that it also fires early if all handles for a loading
asset are dropped (`Removed` fires after the loading completes). note
that in that case, processing based on `Loaded` won't have been done
anyway.
i think we should get rid of `Unused` completely, it is not currently
used anywhere (except here, previously) and i think using it is probably
always a mistake.
i also am not sure why we keep loading assets that have been dropped
while loading, we should probably drop the loader task as well and
remove immediately.~~
# Objective
Whenever a nodes size gets changed, its texture slices get updated a
frame later. This results in visual glitches when animating the size of
a node with a texture slice. See this video:
[Screencast from 17-03-24
14:53:13.webm](https://github.com/bevyengine/bevy/assets/46689298/64e711f7-a1ec-41e3-b119-dc8d7e1a7669)
## Solution
Compute texture slices after the layout system has finished.
# Objective
- Resolves#12463
## Solution
- Added `ClampColor`
Due to consistency, `is_within_bounds` is a method of `ClampColor`, like
`is_fully_transparent` is a method of `Alpha`
---
## Changelog
### Added
- `ClampColor` trait
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
It's useful to have access to render pipeline statistics, since they
provide more information than FPS alone. For example, the number of
drawn triangles can be used to debug culling and LODs. The number of
fragment shader invocations can provide a more stable alternative metric
than GPU elapsed time.
See also: Render node GPU timing overlay #8067, which doesn't provide
pipeline statistics, but adds a nice overlay.
## Solution
Add `RenderDiagnosticsPlugin`, which enables collecting pipeline
statistics and CPU & GPU timings.
---
## Changelog
- Add `RenderDiagnosticsPlugin`
- Add `RenderContext::diagnostic_recorder` method
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
`QueryState::archetype_component_access` is only really ever used to
extend `SystemMeta`'s. It can be removed to save some memory for every
`Query` in an app.
## Solution
* Remove it.
* Have `new_archetype` pass in a `&mut Access<ArchetypeComponentId>`
instead and pull it from `SystemMeta` directly.
* Split `QueryState::new` from `QueryState::new_with_access` and a
common `QueryState::new_uninitialized`.
* Split `new_archetype` into an internal and public version. Call the
internal version in `update_archetypes`.
This should make it faster to construct new QueryStates, and by proxy
lenses and joins as well.
`matched_tables` also similarly is only used to deduplicate inserting
into `matched_table_ids`. If we can find another efficient way to do so,
it might also be worth removing.
The [generated
assembly](https://github.com/james7132/bevy_asm_tests/compare/main...remove-query-state-archetype-component-access#diff-496530101f0b16e495b7e9b77c0e906ae3068c8adb69ed36c92d5a1be5a9efbe)
reflects this well, with all of the access related updates in
`QueryState` being removed.
---
## Changelog
Removed: `QueryState::archetype_component_access`.
Changed: `QueryState::new_archetype` now takes a `&mut
Access<ArchetypeComponentId>` argument, which will be updated with the
new accesses.
Changed: `QueryState::update_archetype_component_access` now takes a
`&mut Access<ArchetypeComponentId>` argument, which will be updated with
the new accesses.
## Migration Guide
TODO
# Objective
Improve code quality involving fixedbitset.
## Solution
Update to fixedbitset 0.5. Use the new `grow_and_insert` function
instead of `grow` and `insert` functions separately.
This should also speed up most of the set operations involving
fixedbitset. They should be ~2x faster, but testing this against the
stress tests seems to show little to no difference. The multithreaded
executor doesn't seem to be all that much faster in many_cubes and
many_foxes. These use cases are likely dominated by other operations or
the bitsets aren't big enough to make them the bottleneck.
This introduces a duplicate dependency due to petgraph and wgpu, but the
former may take some time to update.
## Changelog
Removed: `Access::grow`
## Migration Guide
`Access::grow` has been removed. It's no longer needed. Remove all
references to it.
# Objective
Make `Transform` APIs more ergonomic by allowing users to pass `Dir3` as
an argument where a direction is needed. Fixes#12481.
## Solution
Accept `impl TryInto<Dir3>` instead of `Vec3` for direction/axis
arguments in `Transform` APIs
---
## Changelog
The following `Transform` methods now accept an `impl TryInto<Dir3>`
argument where they previously accepted directions as `Vec3`:
* `Transform::{look_to,looking_to}`
* `Transform::{look_at,looking_at}`
* `Transform::{align,aligned_by}`
## Migration Guide
This is not a breaking change since the arguments were previously `Vec3`
which already implements `TryInto<Dir3>`, and behavior is unchanged.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: IQuick 143 <IQuick143cz@gmail.com>
# Objective
- Even if we have `Laba` and `Oklcha` colorspaces using lightness as the
L field name, `Oklaba` doesn't do the same
- The shorthand function for creating a new color should be named
`Oklaba::lab`, but is named `lch`
## Solution
- Rename field l in `Oklaba` to lightness
- Rename `Oklaba::lch` to `Oklaba::lab`
---
## Changelog
### Changed
- Changed name in l field in `Oklaba` to lightness
- Changed method name `Oklaba::lch` to `Oklaba::lab`
## Migration Guide
If you were creating a Oklaba instance directly, instead of using L, you
should use lightness
```rust
// Before
let oklaba = Oklaba { l: 1., ..Default::default() };
// Now
let oklaba = Oklaba { lightness: 1., ..Default::default() };
```
if you were using the function `Oklaba::lch`, now the method is named
`Oklaba::lab`
# Objective
Give easy methods for uniform point sampling in a variety of primitive
shapes (particularly useful for circles and spheres) because in a lot of
cases its quite easy to get wrong (non-uniform).
## Solution
Added the `ShapeSample` trait to `bevy_math` and implemented it for
`Circle`, `Sphere`, `Rectangle`, `Cuboid`, `Cylinder`, `Capsule2d` and
`Capsule3d`. There are a few other shapes it would be reasonable to
implement for like `Triangle`, `Ellipse` and `Torus` but I'm not
immediately sure how these would be implemented (other than rejection
which could be the best method, and could be more performant than some
of the solutions in this pr I'm not sure). This exposes the
`sample_volume` and `sample_surface` methods to get both a random point
from its interior or its surface. EDIT: Renamed `sample_volume` to
`sample_interior` and `sample_surface` to `sample_boundary`
This brings in `rand` as a default optional dependency (without default
features), and the methods take `&mut impl Rng` which allows them to use
any random source implementing `RngCore`.
---
## Changelog
### Added
Added the methods `sample_interior` and `sample_boundary` to a variety
of primitive shapes providing easy uniform point sampling.
