Wolfgang Denk
763b5f34c3
Remove board specific configuration includes from the common xilinx
...
ethernet and iic adapter code.
Patch by Michael Libeskind, 12 Jul 2005
2006-03-12 23:13:27 +01:00
Wolfgang Denk
47705af5da
Merge with git://git.kernel.org/pub/scm/boot/u-boot/u-boot.git#mpc8349ads
2006-03-12 21:49:19 +01:00
Wolfgang Denk
8e7b703a62
Coding Style cleanup
2006-03-12 02:55:22 +01:00
Wolfgang Denk
6cb142fa3b
Add missing Blackfin files.
2006-03-12 02:12:27 +01:00
Wolfgang Denk
8ff0208d31
Switch MPC86xADS and MPC885ADS boards to use cpuclk environment
...
variable to set clock
Patch by Yuli Barcohen, 05 Jun 2005
2006-03-12 01:55:43 +01:00
Wolfgang Denk
aba9f1af60
Memory configuration changes for ZPC.1900 board
...
- Fix SDRAM timing on both local bus and 60x bus
- Add support for second flash bank (SIMM)
- Change boot flash base
Patch by Yuli Barcohen, 05 Jun 2005
2006-03-12 01:45:44 +01:00
Wolfgang Denk
5797b821dc
Add support for Adder boards with 16MB SDRAM;
...
add support for second FEC on Adder87x board.
Patch by Yuli Barcohen, 05 Jun 2005
2006-03-12 01:43:03 +01:00
Wolfgang Denk
84ef51a632
Fix cleanup for netstart board.
...
Remove build results from repository
2006-03-12 00:04:20 +01:00
Wolfgang Denk
d2ed2f661b
More GCC 4.x woes
2006-03-11 23:07:09 +01:00
Wolfgang Denk
8de7ed3abe
More GCC 4.x code cleanup
2006-03-11 22:56:07 +01:00
Wolfgang Denk
d52fb7e3d1
Some code cleanup for GCC 4.x
2006-03-11 22:53:33 +01:00
Wolfgang Denk
951a954b77
Merge with /home/wd/git/u-boot/master
...
Code cleanup.
2006-03-06 23:18:48 +01:00
Markus Klotzbücher
43638c674a
Cleanup of NAND support of delta board using the Monahans Data Flash
...
Controller.
2006-03-06 15:04:25 +01:00
Markus Klotzbücher
f9e029184b
NAND finally working. Two bugs fixed:
...
* For READ_STATUS and READID commands always 8 bytes need to be read from
NDDB. Otherwise they stay there and get send to flash as the first data
word when writing.
* In nand_base.c the oob variable is not reset so this->oob_buf is
overwritten what eventually screws up the bad block descriptor table.
2006-03-06 13:45:42 +01:00
Wolfgang Denk
bfc81252c0
Minor code cleanup
2006-03-06 13:03:37 +01:00
Wolfgang Denk
4e3ccd2692
Merge the new NAND code (testing-NAND brach); see doc/README.nand
...
Rewrite of NAND code based on what is in 2.6.12 Linux kernel
Patch by Ladislav Michl, 29 Jun 2005
[Merge with /home/tur/nand/u-boot]
2006-03-06 11:25:22 +01:00
Bartlomiej Sieka
addb2e1650
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
...
code and in SoC code). Boards using the old way have CFG_NAND_LEGACY and
BOARDLIBS = drivers/nand_legacy/libnand_legacy.a added. Build breakage for
NETTA.ERR and NETTA_ISDN - will go away when the new NAND support is
implemented for these boards.
2006-03-05 18:57:33 +01:00
Markus Klotzbücher
bf7cac033b
Lots of new stuff:
...
* Debug message can be turned on and off.
* Waiting for events now times out.
* Implemented RESET command.
* Added appropriate nand_bbt_descriptor and nand_oobinfo.
Remaining Problems:
* Read Status still behaves weird an returns invalid stuff sometimes.
* ECC Placement does not respect our scheme in nand_oobinfo.
2006-03-04 18:35:51 +01:00
Stefan Roese
f1ee982506
Add lowboot target to mcc200 board
...
Patch by Stefan Roese, 4 Mar 2006
2006-03-04 14:57:03 +01:00
Markus Klotzbücher
f8785e96c9
Erasing works too now. The CS don't care causes problem with READSTATUS,
...
don't ask me why. There are still bugs in the bad block logic.
2006-03-03 20:13:43 +01:00
Markus Klotzbücher
24e1217be3
Write operation is working. Turned out that the READSTATUS hack was wrong
...
after all.
2006-03-03 16:09:28 +01:00
Markus Klotzbücher
9187a35b6c
Writing is working, but there's still a bug that causes the data written to
...
start at an offset of 4 bytes from the start of the page.
2006-03-03 15:37:01 +01:00
Markus Klotzbücher
19fdeff433
Implemented writing, not working yet.
2006-03-03 12:11:11 +01:00
Markus Klotzbücher
e2053f9c7a
Moved the waiting loop for "Read Data Request" RDDREQ into the
...
delta_cmdfunc function, because this bit is only set once after a command
is sent and this allows read functions to be called multiple times.
2006-03-02 14:02:36 +01:00
Markus Klotzbücher
bb1ff049fb
Read bug fixed. Now "nand bad" list the badblocks correctly (i hope, since
...
there are 0)
2006-03-02 12:10:01 +01:00
Markus Klotzbücher
481911c78c
Further NAND stuff implemented. Basic read commands seem to work.
2006-03-01 23:33:27 +01:00
Stefan Roese
f18e874ad5
Fix problem with flash_get_size() from CFI driver update
...
Patch by Stefan Roese, 1 Mar 2006
2006-03-01 17:00:49 +01:00
Markus Klotzbücher
00c35bd214
Added GPIO initialization of DF signal. Still not working.
2006-02-28 22:51:01 +01:00
Markus Klotzbücher
6949328d7d
First steps implementing NAND support. Not working, fails to read ID.
2006-02-28 18:05:25 +01:00
Stefan Roese
58ad497833
Convert mcc200 to use common CFI flash driver
...
Patch by Stefan Roese, 28 Feb 2006
2006-02-28 15:33:28 +01:00
Stefan Roese
79b4cda076
Major CFI-FLASH driver update:
...
* Add env-variable "unlock" to handle initial state of sectors
(locked/unlocked).
Only the U-Boot image and it's environment is protected,
all other sectors are unprotected (unlocked) if flash
hardware protection is used (CFG_FLASH_PROTECTION) and
the environment variable "unlock" is set to "yes".
Patch by Stefan Roese, 28 Feb 2006
* Update drivers/cfi_flash.c:
- find_sector() called in both versions of flash_write_cfiword()
Patch by Peter Pearse, 27th Feb 2006
* CFI support for a x8/x16 AMD/Spansion flash configured in x8 mode
Patch by Jose Maria Lopez, 16 Jan 2006
* Add support for AMD/Spansion Flashes in flash_write_cfibuffer
Patch by Alex Bastos and Thomas Schaefer, 2005-08-29
* Changes/fixes for drivers/cfi_flash.c:
We *should* check if there are any error bits if the previous call
returned ERR_OK (Otherwise we will have output an error message in
flash_status_check() already.) The original code would only check for
error bits if flash_status_check() returns ERR_TIMEOUT.
Patch by Marcus Hall, 23 Aug 2005
* Changes/fixes for drivers/cfi_flash.c:
- Add CFG_FLASH_PROTECT_CLEAR on drivers/cfi_flash.c
- Prohibit buffer write when buffer_size is 1 on drivers/cfi_flash.c
Patch by Sangmoon Kim, 19 Aug 2005
* Fixes for drivers/cfi_flash.c:
- Fix wrong timeout value usage in flash_status_check()
- Round write_tout up when converting to msec in flash_get_size()
- Remove clearing flash status at the end of flash_write_cfibuffer()
which sets Intel 28F640J3 flash back to command mode on CSB472
Patch by Tolunay Orkun, 02 July 2005
2006-02-28 15:29:58 +01:00
Markus Klotzbücher
0377dca227
Merge /home/tur/nand/u-boot/
...
This is a first version of the testing-NAND branch merged back to main.
2006-02-24 14:16:31 +01:00
Markus Klotzbücher
7d4d1ce48c
Merge branch 'master' of http://www.denx.de/git/u-boot
2006-02-24 11:34:34 +01:00
Bartlomiej Sieka
038ccac511
Merge with /home/wd/git/u-boot/testing-NAND/ to add new NAND handling.
2006-02-24 09:37:22 +01:00
Wolfgang Denk
c81eb1f5f5
Cleanup MCC200 board.
2006-02-24 01:42:40 +01:00
Markus Klotzbücher
599f52253a
SDRAM now working.
2006-02-22 17:48:43 +01:00
Markus Klotzbücher
ff3c2a9478
SDRAM now working for delta board, but there are still aliasing problems,
...
we only see 64MB.
2006-02-22 14:05:44 +01:00
Wolfgang Denk
86ea5f93d7
Initial port to MCC200 board (work in progress)
...
Minimally modified patch by Bluetechnix, Vienna
2006-02-22 00:43:16 +01:00
Markus Klotzbücher
48b6242aa1
SDRAM seems to be working on delta board, though u-boot doesn't start yet.
2006-02-22 00:06:01 +01:00
Markus Klotzbücher
4f7a0e3671
New board directory and config for the benq delta board (copied from
...
zylonite). Minor pxa-regs.h update.
2006-02-20 16:37:37 +01:00
Markus Klotzbücher
b3c36e6b94
basic u-boot is working, boots into the command shell.
2006-02-09 13:19:25 +01:00
Markus Klotzbücher
9d803d8c0b
Changes:
...
* lots of bugfixes in the assembler code
* reverted hardware.h back to original
* enabled hardware DRAM calibration
* GCC-4 fix: modified GLOBAL_DATA_POINTER macro
2006-02-08 18:56:28 +01:00
Stefan Roese
79830d591a
Convert CPCI750 to use common CFI flash driver
...
Patch by Reinhard Arlt, 8 Feb 2006
2006-02-08 15:54:15 +01:00
Markus Klotzbücher
af646e865f
Forgot to add files to zylonite branch.
2006-02-07 20:48:45 +01:00
Stefan Roese
48a05a5188
Various changes to esd HH405 board specific files
...
Patch by Matthias Fuchs, 07 Feb 2006
2006-02-07 16:51:04 +01:00
Zachary P. Landau
3a108ed868
Add support for r5200 board
2006-01-26 17:37:59 -05:00
Stefan Roese
18c5e64c5b
Fix various compiler warnings on ppc4xx builds (ELDK 4.0)
...
Patch by Stefan Roese, 18 Jan 2006
2006-01-18 20:06:44 +01:00
Stefan Roese
a7b9fb9110
Add VGA support (CT69000) to CPCI750 board.
...
Insert missing __le32_to_cpu() for filesize in ext2fs_read_file().
Patch by Reinhard Arlt, 30 Dec 2005
2006-01-18 20:05:34 +01:00
Stefan Roese
2076d0a15f
PMC405 and CPCI405: Moved configuration of pci resources into config file.
...
PMC405 and CPCI2DP: Added firmware download and booting via pci.
Patch by Matthias Fuchs, 20 Dec 2005
2006-01-18 20:03:15 +01:00
Wolfgang Denk
c4b465f63e
Fix 28F256J3A support on PM520 board
...
(without bank-switching only 32 MB can be accessed)
2006-01-13 17:00:56 +01:00
Kumar Gala
86902b8e36
Added PCI support for MPC8349ADS board
...
Patch by Kumar Gala 11 Jan 2006
2006-01-12 19:51:38 -06:00
Wolfgang Denk
c7428d49ac
Add support for 28F256J3A flah (=> 64 MB) on PM520 board
2005-12-29 15:12:09 +01:00
Wolfgang Denk
27e166b875
Fix compiler problem with at91rm9200dk board.
...
Patch by Eugen Bigz, 19 Dec 2005
2005-12-19 13:02:45 +01:00
Stefan Roese
81a3170b15
Changes to Yellowstone & Yosemite 440EP/GR eval boards:
...
- Changed GPIO setup to enable another address line in order to
address 64M of FLASH.
- Added function sdram_tr1_set to auto calculate the tr1 value for
the DDR.
Patch by Steven Blakeslee, 12 Dec 2005
2005-12-15 09:43:12 +01:00
Wolfgang Denk
7481266e4e
2005-12-12 16:06:05 +01:00
Wolfgang Denk
f013dacf0a
Code cleanup, especially MIPS for GCC 4.x
2005-12-04 00:40:34 +01:00
Stefan Roese
d96f41e016
Add support for TQM8541/8555 boards, TQM85xx support reworked:
...
- Support for TQM8541/8555 boards added.
- Complete rework of TQM8540/8560 support.
- Common TQM85xx code now supports all current TQM85xx platforms
(TQM8540/8541/8555/8560).
- DDR SDRAM size detection added.
- CAS latency default values can be overwritten by setting "serial#"
to e.g. "ABC0001 casl=25" -> CAS latency 2.5 will be used.
If problems are detected with this non default CAS latency,
the defualt values will be used instead.
- FLASH size detection added.
- Moved FCC ethernet driver initialization behind TSEC driver init
-> TSEC is first device.
Patch by Stefan Roese, 30 Nov 2005
2005-11-30 13:06:40 +01:00
Stefan Roese
6e7fb6eaa5
Add support for AMCC 440SP, add support for AMCC Luan 440SP eval board.
...
Patch by John Otken, 23 Nov 2005
2005-11-29 18:18:21 +01:00
Stefan Roese
1178a412d2
Minor AMCC 4xx board cleanups
...
Patch by Stefan Roese, 27 Nov 2005
2005-11-29 18:17:41 +01:00
Stefan Roese
3d9569b232
Changed PPC44x startup message (cpu info, speed...) to common style:
...
On PPC44x platforms, the startup message generated in "cpu.c" only
comprised the ppc type and revision but not additional informations
like speed etc. Those speed infos where printed in the board specific
code. This new implementation now prints all CPU infos in the common
cpu specific code. No board specific code is needed anymore and
therefore removed from all current 44x implementations.
Patch by Stefan Roese, 27 Nov 2005
2005-11-27 19:36:26 +01:00
Stefan Roese
5568e613ee
Add support for Prodrive P3P440 board:
...
- Added onboard PPC440 DDR autodetection in cpu/ppc/sdram.c
- CFG_FLASH_QUIET_TEST added to use the common CFI driver
for bank autodetection
Patch by Stefan Roese, 22 Nov 2005
2005-11-22 13:20:42 +01:00
Wolfgang Denk
fe126d8b34
Change all '$(...)' variable references into '${...}'
...
which makes the environment compatible with the hush shell.
WARNING: Support for the old '$(...)' syntax will be
discontinued in a later version.
2005-11-20 21:40:11 +01:00
Rafal Jaworowski
5a164c8ca9
Minor changes to init flags in TQM834x PCI.
2005-11-17 00:26:18 +01:00
Stefan Roese
c7911c7e8f
Merge with /server/home/stefan/git/u-boot/bamboo-sdram
2005-11-15 16:23:41 +01:00
Stefan Roese
fd49bf0214
Fix Bamboo DDR SDRAM initialization (problem with onboard SDRAM)
...
Patch by Stefan Roese, 15 Nov 2005
2005-11-15 16:04:58 +01:00
Stefan Roese
feaedfcf84
New PPC 405EP board added: CMS700
...
Added CONFIG_NET_MULTI for VOM405 board.
Added reset_phy() for VOM405 board.
Patch by Matthias Fuchs, 09 Nov 2005
2005-11-15 10:35:59 +01:00
Stefan Roese
ea339205a9
Updated PCI mapping for esd CPCI2DP board.
...
Add support for error LED.
Patch by Matthias Fuchs, 07 Nov 2005
2005-11-08 09:00:09 +01:00
Stefan Roese
f190c11b1f
Adjust bd->bi_flashstart on Yellowstone & Yosemite to correct size
...
Patch by Stefan Roese, 05 Nov 2005
2005-11-05 15:50:16 +01:00
Stefan Roese
ef04a0aa26
Additional fix for external IRQ config on Yellowstone & Yosemite
...
Patch by Stefan Roese, 03 Nov 2005
2005-11-03 08:31:33 +01:00
Stefan Roese
57275b69c6
Add support for Ocotea pass 3 with 440GX Rev. F
...
Patch by Stefan Roese, 01 Nov 2005
2005-11-01 10:08:03 +01:00
Stefan Roese
d9f2f5008c
Merge with /git/u-boot.git
2005-11-01 10:02:21 +01:00
Wolfgang Denk
5d4ee51061
Merge with /home/m8/git/u-boot
2005-10-29 23:45:04 +02:00
Marian Balakowicz
63ff004c4f
Add support for multiple PHYs.
2005-10-28 22:30:33 +02:00
Marian Balakowicz
170d5e6d4c
Fix conflicting types (flash_write()) in trab auto_update.c
2005-10-28 15:29:43 +02:00
Stefan Roese
e190290ba4
Fix external IRQ configuration on Yellowstone & Yosemite
...
The multiplexed signals Ext IRQ0...3 have to be configured as IRQ,
because they default to GPIOx (440EP/GR).
Patch by Stefan Roese, 28 Oct 2005
2005-10-28 12:21:06 +02:00
Wolfgang Denk
7b5cac0e19
Merge with /home/wd/git/u-boot/master
2005-10-21 22:41:25 +02:00
Stefan Roese
a547775bac
Fix conflicting types (flash_write()) in esd auto_update.c
...
Patch by Stefan Roese, 20 Oct 2005
2005-10-20 16:39:16 +02:00
Rafal Jaworowski
6902df56a0
Add PCI support for the TQM834x board.
2005-10-17 02:39:53 +02:00
Wolfgang Denk
84bd92bdda
Merge with /home/m8/git/u-boot
2005-10-15 18:23:43 +02:00
Wolfgang Denk
77ddac9480
Cleanup for GCC-4.x
2005-10-13 16:45:02 +02:00
Wolfgang Denk
814d98f24e
Add missing files for Pantelis Antoniou's patch
...
Patch by Pantelis Antoniou, 04 Sep 2005
2005-10-13 01:59:29 +02:00
Wolfgang Denk
cbdf8824fa
Merge with /home/sr/git/u-boot
2005-10-13 01:55:58 +02:00
Wolfgang Denk
b604a40b4f
Cleanup
2005-10-13 01:50:05 +02:00
Wolfgang Denk
070610c529
Add support for OF flat tree for the STXtc board.
...
Patch by Pantelis Antoniou, 04 Sep 2005
2005-10-13 01:49:09 +02:00
Wolfgang Denk
f57f70aab9
Support passing of OF flat trees to the kernel.
...
Patch by Pantelis Antoniou, 04 Sep 2005
2005-10-13 01:45:54 +02:00
Marian Balakowicz
e6f2e90233
Added support for TQM834x boards.
2005-10-11 19:09:42 +02:00
Wolfgang Denk
3df5bea0b0
Add support for NetSilicon NS7520 processor.
...
Patch by Art Shipkowski, 12 May 2005
Cleanup.
2005-10-09 01:41:48 +02:00
Wolfgang Denk
7521af1c7d
Add support for AP1000 board.
...
Patch by James MacAulay, 07 Oct 2005
2005-10-09 01:04:33 +02:00
Wolfgang Denk
95f9dda216
Eliminate hard-coded address of Ethernet transfer buffer on at91rm9200
...
Patch by Anders Larsen, 07 Oct 2005
The Atmel errata #11 states that the transfer buffer descriptor
table must be aligned on a 16-word boundary. As it turned out, this
is insufficient - it seems the table must be aligned on a boundary
at least as large as the table itself (in Linux this is not an
issue - the table is aligned on a PAGE_SIZE (4096) boundary).
2005-10-09 00:33:37 +02:00
Wolfgang Denk
96782c63d3
Cleanup warnings for cpu/arm720t & cpu/arm1136 files.
...
sed the linker scripts, rather than pre-process them.
Patch by Peter Pearse, 07 Oct 2005
2005-10-09 00:22:48 +02:00
Stefan Roese
c29ab9d71d
Fix gzip bmp support (test if malloc fails, warning when truncated).
...
Increase CFG_VIDEO_LOGO_MAX_SIZE on HH405 board.
Patch by Stefan Roese, 08 Oct 2005
2005-10-08 10:19:07 +02:00
Wolfgang Denk
b8e16a3450
Cleanup
2005-10-06 23:44:55 +02:00
Wolfgang Denk
64db4b10a5
Make "split_by_variant.sh" executable.
2005-10-06 17:09:56 +02:00
Wolfgang Denk
87cb6862b9
Update make target for ARM supported boards.
...
Use lowlevel_init() instead of platformsetup() [rename].
Patch by Peter Pearse, 06 Oct 2005
2005-10-06 17:08:18 +02:00
Wolfgang Denk
f5c254d719
Fix the machine-id of the Cogent csb637 board
...
Patch by Anders Larsen, 05 Oct 2005
2005-10-06 01:26:16 +02:00
Wolfgang Denk
645da51097
Add support for Cogent csb637
...
Patch by Anders Larsen, 29 Apr 2005
2005-10-05 02:00:09 +02:00
Wolfgang Denk
080bdb7f3a
* Move dm9161.c and lxt972.c into cpu/arm920t/at91rm9200
...
Patch by Anders Larsen, 29 Apr 2005
* Fix problems introduced by Patch by Steven Scholz, 02 Mar 2005
(8e2be51de8
)
2005-10-05 01:51:29 +02:00
Wolfgang Denk
99b0d2851a
Added support for KwikByte KB920x boards (based on AT91RM9200)
...
Patch by Matt ?? <kb9200_dev@kwikbyte.com>, 27 Apr 2005
2005-10-05 00:19:34 +02:00
Wolfgang Denk
45237bc00b
Add support for S29GL064M-R3 flash chip on xsengine board
...
Patch by Kurt Stremerch, 18 Apr 2005
2005-10-05 00:03:55 +02:00
Wolfgang Denk
9b880bd4d8
Update ARM Integrator boards:
...
Correct addessing errors in platform files.
Split off common core module data from Integrator header files to
include/armcoremodule.h.
Patch by Peter Pearse, 04 Oct 2005
2005-10-04 23:10:28 +02:00
Stefan Roese
93b17ec382
Change board message on AMCC Yosemite & Yellowstone to common style
...
Patch by Stefan Roese, 3 Oct 2005
2005-10-03 15:27:50 +02:00
Stefan Roese
2c7b2ab5a0
Fix problem with SM501 init on HH405 board.
...
Patch by Stefan Roese, 30 Sep 2005
2005-09-30 16:41:12 +02:00
Wolfgang Denk
0e4018d244
Add support for MP2USB board.
...
Patch by Eric Benard, 07 Apr 2005
2005-09-26 01:14:38 +02:00
Wolfgang Denk
c570b2fdf5
Add board support for armadillo HT1070
...
Patch by Rowel Atienza, 06 Apr 2005
2005-09-26 01:06:33 +02:00
Wolfgang Denk
8e6f1a8ec2
Add Barco Streaming Video Card (SVC) and Sample Compress Network (SCN) board
...
Patch by Marc Leeman, 04 Mar 2005
2005-09-25 18:59:36 +02:00
Wolfgang Denk
716c1dcb41
Cleanup
2005-09-25 18:49:35 +02:00
Wolfgang Denk
49a7581c6c
OMAP242x H4 board update
...
- fix for ES2 differences.
- switch to using the cfi_flash driver.
- fix SRAM build address.
- fix for GP device operation.
- unlock SRAM for GP devices.
- display more device information.
- fix potential deadlock in omap24xx_i2c driver.
- fix DLL load values to match dpllout*1 operation.
- fix 2nd chip select init for combo DDR device.
- add support for CFI Intel 28F256L18 on H4 board.
Patch by Richard Woodruff, 03 Mar 2005
2005-09-25 18:41:04 +02:00
Wolfgang Denk
c177bb5f6c
Fix VOH405 Support
...
Patch by Matthias Fuchs, 25 Sep 2005
2005-09-25 16:31:16 +02:00
Wolfgang Denk
1972dc0a9e
Added support for PCI bridge on MPC8272ADS
...
Patch by Vitaly Bordug, Feb 09 2005
2005-09-25 16:27:55 +02:00
Wolfgang Denk
0148e8cb43
Update multicore CM9XX support for Integrator AP to allow booting from flash
...
Patch by Jean-Paul Saman, 8 Feb 2005
2005-09-25 16:22:14 +02:00
Wolfgang Denk
70a2047ff6
Add Vibren (was Accelent) PXA255 IDP Support
...
Patch by Cliff Brake, 04 Feb 2005
2005-09-25 15:59:01 +02:00
Wolfgang Denk
fe7eb5d88b
Cleanup
2005-09-25 02:00:47 +02:00
Wolfgang Denk
74f4304ee7
Add ARM946E cpu and core module targets; remap memory to 0x00000000
...
Patch by Peter Pearse, 2 Feb 2005
2005-09-25 01:48:28 +02:00
Wolfgang Denk
c97a2aaf27
OMAP242x fix for GP device booting
...
- Add SRAM unlock for GP devices.
- Change DDR DLL unlock value to allow DPLLout*1 operation.
Patches by Richard Woodruff, 21 Jan 2005:
2005-09-25 00:59:24 +02:00
Wolfgang Denk
265817c7e6
Add support for AMD's Pb1x00 eval board;
...
add MII routines to the au1x00 ethernet driver;
add USB ohci driver (work in progress)
Patch by Thomas Sailer, 20 Jan 2005
2005-09-25 00:53:22 +02:00
Wolfgang Denk
b63de2c053
Update omap5912osk board:
...
Use drivers/cfi_flash.c instead of private flash driver;
Remove hardcoded personalized settings from omap5912osk.h;
Fix spacing with (RO) marks in 'flinfo' output.
Patch by Michael Bendzick, 14 Jan 2005
2005-09-25 00:23:05 +02:00
Wolfgang Denk
3706ba1a36
Fix warnings for PCI code on ixp
...
Patch by Joe <lgxue@yahoo.com>, 13 Jan 2005
2005-09-25 00:00:45 +02:00
Wolfgang Denk
2b792afcc5
* Fix PHY address argument passing with mii info command
...
Patch by Andrew Dyer, 28 Dec 2004
* Cleanup: fix broken builds
2005-09-24 21:54:50 +02:00
Wolfgang Denk
9ea4b5886a
More cleanup: get rid or redundand #defines
2005-09-23 13:12:15 +02:00
Wolfgang Denk
0c8721a466
Cleanup (PPC4xx is AMCC now)
2005-09-23 11:05:55 +02:00
Wolfgang Denk
a6e6cf0036
Merge with /home/wd/git/u-boot/work
2005-09-22 09:46:19 +02:00
Stefan Roese
7644f16f6b
esd CPCI2DP board added
...
Patch by Matthias Fuchs, 22 Sep 2005
2005-09-22 09:16:57 +02:00
Stefan Roese
026cb5d864
esd PMC405 board updated
...
Patch by Matthias Fuchs, 22 Sep 2005
2005-09-22 09:07:15 +02:00
Stefan Roese
98f4a3dfcb
Add SM501 support to HH405 board.
...
Add support for gzip compressed bmp's (CONFIG_VIDEO_BMP_GZIP).
Add support for eeprom write-enable (CFG_EEPROM_WREN).
Patch by Stefan Roese, 22 Sep 2005
2005-09-22 09:04:17 +02:00
Wolfgang Denk
8b4c9e7c14
Fix bug in auto_update (trab board)
...
Patch by Martin Krause, 16 Sep 2005
2005-09-21 15:31:25 +02:00
Stefan Roese
34c0a5e98b
Update AMCC Yosemite to get a consistent setup for all AMCC eval
...
boards (baudrate, environment...). Flash driver fixed.
Patch by Stefan Roese, 15 Sep 2005
2005-09-15 11:34:07 +02:00
Wolfgang Denk
ac7eb8a315
Update of new NAND code
...
Patch by Ladislav Michl, 13 Sep 2005
2005-09-14 23:53:32 +02:00
Wolfgang Denk
5d244ea128
Merge with /home/sr/git/u-boot:
...
Add I2C support for TQM85xx
2005-09-06 22:17:16 +02:00
Wolfgang Denk
6d51e505ad
Cleanup compiler warnings.
2005-09-03 01:58:35 +02:00
Stefan Roese
9d2a873bdf
Add I2C support to TQM8540 and TQM8560 boards (EEPROM, RTC, LM75-DTT).
...
Removed CFG_CMD_DISPLAY from default commands.
Fixed compiler warning in net.c.
Patch by Stefan Roese, 31 Aug 2005
2005-08-31 12:55:50 +02:00
Wolfgang Denk
807d5d7319
Fix problems with ld version 2.16 (dot outside sections problem)
...
Pointed out by Gerhard Jaeger, 31 Aug 2005;
cf. http://sourceware.org/ml/binutils/2005-08/msg00412.html
2005-08-31 12:28:00 +02:00
Wolfgang Denk
9f96ae44c6
Add keyboard and dot matrix display support for HMI1001 board.
2005-08-30 13:04:12 +02:00
Wolfgang Denk
ec2e5a2cce
Merge with testing-4xx_enet (Create generic 4xx Ethernet code)
2005-08-23 23:03:20 +02:00
Stefan Roese
5e4b3361bc
Add esd cpci5200 and pf5200 boards
...
Patch by Reinhard Arlt, 22 Aug 2005
2005-08-22 17:51:53 +02:00
Wolfgang Denk
c7db9a3805
Initialize serial# and ethaddr from manufacturer data in EEPROM on CMC-PU2
...
Patch by Martin Krause, 08 Jun 2005
2005-08-19 00:53:02 +02:00
Wolfgang Denk
6617aae9b9
Add new board specific commands for TQM5200/STK52XX
...
- Sound commands (beep, wav, sound)
- Test commands (led, can, backlight, rs232)
Patch by Martin Krause, 02 May 2005
2005-08-19 00:46:54 +02:00
Wolfgang Denk
601aed1e8f
Add automatic HW detection for another CMC_PU2 variant
...
Patch by Martin Krause, 20 Apr 2005
2005-08-19 00:08:55 +02:00
Wolfgang Denk
e8aa824eb2
Fix initialization problem on TQM5200 without SM501
...
Patch by Martin Krause, 8 Apr. 2005
2005-08-18 11:55:22 +02:00
Stefan Roese
d6c61aabc4
Merged 405gp_enet.c and 440gx_enet.c to generic 4xx_enet.c
...
now handling all 4xx cpu's.
Patch by Stefan Roese, 16 Aug 2005
2005-08-16 18:18:00 +02:00
22e05df45c
Merge with pollux.denx.org:/home/git/u-boot/.git
2005-08-16 17:34:22 +02:00
Wolfgang Denk
98128f389c
Enable PCI on hmi1001 board
2005-08-16 15:17:53 +02:00
Wolfgang Denk
3d078ce6d7
Coding style cleanup
2005-08-15 16:03:56 +02:00
Wolfgang Denk
6bdf430660
Add support for Silicon Turnkey eXpress XTc (mpc87x/88x) board.
...
Patch by Dan Malek and Pantelis Antoniou, 15 Aug 2005
2005-08-15 15:55:00 +02:00
Stefan Roese
b79316f2a2
Add Sandburst Metrobox and Sandburst Karef board support packages.
...
Second serial port on 440GX now defined as a system device.
Add 'Short Etch' code for Cicada PHY within 440gx_enet.c
Patch by Travis B. Sawyer, 12 Jul 2005
Check return value of malloc in 440gx_enet.c
Patch by Travis B. Sawyer, 18 Jul 2005
2005-08-15 12:31:23 +02:00
Wolfgang Denk
5ad2af341d
Code cleanup.
2005-08-13 23:13:17 +02:00
Wolfgang Denk
90e4e78365
Remove stale file entry
2005-08-12 23:51:07 +02:00
Wolfgang Denk
b2f508075c
Minor code cleanup
2005-08-12 23:43:12 +02:00
Wolfgang Denk
50814844e4
Add forgotten new fils from latest VoiceBlue update
2005-08-12 23:36:08 +02:00
Wolfgang Denk
b3b0fd552e
Fix Murray Jensen's mail address.
...
Patch by Murray Jensen, 30 Jun 2005
2005-08-12 23:20:59 +02:00
Wolfgang Denk
e544528831
VoiceBlue update: eeprom tool can also store firmware version now.
...
eeprom.bin is runable by jumping at load address.
Patch by Ladislav Michl, 23 May 2005
2005-08-12 22:56:51 +02:00
Stefan Roese
5315dfa9d1
esd PCI405 board updated
...
Patch by Matthias Fuchs, 28 Jul 2005
2005-08-12 16:56:56 +02:00
Stefan Roese
82f4c6ac84
esd WUH405 and DU405 board updated
...
Patch by Matthias Fuchs, 27 Jul 2005
2005-08-12 16:52:47 +02:00
6df6d38d2d
Merge with pollux.denx.org:/home/git/u-boot/.git
2005-08-12 15:33:33 +02:00
Wolfgang Denk
dafba16e6f
Merge with /home/wd/git/u-boot/master
2005-08-12 00:22:49 +02:00
Stefan Roese
84286386a8
Update AMCC Yosemite to get a consistent setup for all AMCC eval
...
boards (baudrate, environment...). Flash driver fixed.
Patch by Stefan Roese, 11 Aug 2005
2005-08-11 18:03:14 +02:00
Stefan Roese
c57c7980ff
Add NAND FLASH support for AMCC Bamboo 440EP eval board
...
Patch by Stefan Roese, 11 Aug 2005
2005-08-11 17:56:56 +02:00
adac376ef2
O2DNT: added hardware flash protect support, macros cleanup.
2005-08-11 10:10:30 +02:00
Wolfgang Denk
8f79e4c2da
Add configuration for IFM AEV FIFO board.
...
Minor coding style cleanup.
2005-08-10 15:14:32 +02:00
0841565cc7
O2DNT platform specific code.
2005-08-09 14:52:00 +02:00
Wolfgang Denk
700a0c648d
Add common (with Linux) MTD partition scheme and "mtdparts" command
...
Old, obsolete and duplicated code was cleaned up and replace by the
new partitioning method. There are two possible approaches now:
* define a single, static partition
* use mtdparts command line option and dynamic partitioning
Default is static partitioning.
2005-08-08 01:03:24 +02:00
Wolfgang Denk
452e8e72ad
Fix build problems for PM856 Board
2005-08-08 00:47:14 +02:00
Wolfgang Denk
d06a5f7ebf
Add support for Altera NIOS DK1C20 board
...
Patch by Shlomo Kut, 13 Dec 2004
2005-08-06 01:56:59 +02:00
Wolfgang Denk
f901a83b70
Add support for ep8248 board
...
Patch by Yuli Barcohen, 12 Dec 2004
Minor code cleanup.
2005-08-06 01:42:58 +02:00
Wolfgang Denk
d56019c0ee
Merge with /home/sr/git/u-boot
2005-08-05 23:55:19 +02:00
Wolfgang Denk
b4f15fdaf7
Merge with /home/wd/git/u-boot/jon_loeliger
2005-08-05 20:03:38 +02:00
Wolfgang Denk
b20d00328c
Add support for MicroSys PM856 board
...
Patch by Josef Wagner, 03 Aug 2005
2005-08-05 12:19:30 +02:00
Wolfgang Denk
992b402bbf
Minor fixes to PM854 board
...
Patch by Josef Wagner, 03 Aug 2005
2005-08-05 11:47:10 +02:00
Wolfgang Denk
cbf9c11728
Merge with /home/wd/git/u-boot/master
2005-08-05 11:22:28 +02:00
Stefan Roese
17f50f22bc
Add support for AMCC Bamboo PPC440EP eval board
...
Patch by Stefan Roese, 04 Aug 2005
2005-08-04 17:09:16 +02:00
Wolfgang Denk
460c322f13
(re)enabled scsi commands do_scsi() and do_scsiboot()
...
Patch by Denis Peter, 06 Dec 2004
2005-08-04 01:14:12 +02:00
Wolfgang Denk
dc17fb6dc2
Cleanup build problems (on Fedora Core x86_64 build host)
2005-08-03 22:32:02 +02:00
Jon Loeliger
4b1d95d96a
Merge with rsync://git-user@source.denx.net/git/u-boot.git
2005-08-02 13:53:07 -05:00
Wolfgang Denk
095b8a3798
Coding style cleanup
2005-08-02 17:06:17 +02:00
Wolfgang Denk
7d939f8947
Merge with /home/sr/git/u-boot
2005-08-02 14:43:57 +02:00
Jon Loeliger
de1d0a6995
Fix style issues primarily in 85xx and 83xx boards.
...
- C++ comments
- Trailing white space
- Indentation not by TAB
- Excessive amount of empty lines
- Trailing empty lines
2005-08-01 13:20:47 -05:00
Stefan Roese
8a316c9b62
Major cleanup for AMCC PPC4xx eval boards.
...
Patch by Stefan Roese, 01 Aug 2005
2005-08-01 16:49:12 +02:00
Stefan Roese
c157d8e219
Add support for AMCC PPC440EP/GR eval boards Yosemite and Yellowstone.
...
Patch by Steven Blakeslee, 27 Jul 2005
2005-08-01 16:41:48 +02:00
Wolfgang Denk
0f18cb6eef
Minor fixes for PPChameleon Board:
...
* fix alignment of NAND size
* make code do what the comment says
2005-07-31 00:30:09 +02:00
Wolfgang Denk
010162eb72
Implement h/w sector protection status synchronization at boot.
...
The code is provided for, and was tested on, the Yukon/Alaska
and PM520 boards only.
A bug in flash_real_protect() for the Yukon board was fixed by adding
a function that tells if two banks are on one flash chip.
2005-07-30 16:39:27 +02:00
Lunsheng Wang
b0e3294923
* Patch by Ron Alder, 11 July 2005
...
Add Xianghua Xiao and Lunsheng Wang's support for the
GDA MPC8540 EVAL board.
2005-07-29 10:20:29 -05:00
Eran Liberty
f046ccd15c
* Patch by Eran Liberty
...
Add support for the Freescale MPC8349ADS board.
2005-07-28 10:08:46 -05:00
Jon Loeliger
63be111e72
* Patch by Jon Loeliger, 2005-07-25
...
Move the TSEC driver out of cpu/mpc85xx as it will be shared
by the upcoming mpc83xx family as well.
2005-07-25 15:38:06 -05:00
Jon Loeliger
d9b94f28a4
* Patch by Jon Loeliger, 2005-05-05
...
Implemented support for MPC8548CDS board.
Added DDR II support based on SPD values for MPC85xx boards.
This roll-up patch also includes bugfies for the previously
published patches:
DDRII CPO, pre eTSEC, 8548 LBIU, Andy's TSEC, eTSEC 3&4 I/O
2005-07-25 14:05:07 -05:00
Jon Loeliger
9c4c5ae3e1
* Patch by Jon Loeliger, Kumar Gala 2005-02-08
...
- Convert the CPM2 based functionality to use new CONFIG_CPM2
option rather than a myriad of CONFIG_MPC8560-like variants.
Applies to MPC85xx and MPC8260 boards, includes stxgp3 and sbc8560.
Eliminates the CONFIG_MPC8560 option entirely. Distributes the
new CONFIG_CPM2 option to each 8260 board.
2005-07-23 10:37:35 -05:00
Wolfgang Denk
2d5df63e4f
Patch by Jon Loeliger, 20 Jul 2005:
...
Add missing PCI IO port definitions.
author Kumar Gala <kumar.gala@freescale.com> Wed, 20 Jul 2005 15:39:52 -0500
committer Jon Loeliger <jdl@freescale.com> Wed, 20 Jul 2005 15:39:52 -0500
2005-07-21 16:14:36 +02:00
Wolfgang Denk
ee073a558b
Adjust printed board ID for LWMON board.
2005-07-21 13:53:44 +02:00
Wolfgang Denk
3bb9cec962
Fix file permissions
2005-07-21 11:22:21 +02:00
stroese
cd5b2b9941
* Patch by Stefan Roese, 5 Jul 2005:
...
Update uc100 board PHY setup
2005-07-05 11:35:27 +00:00
wdenk
342717f72a
* Fix baudrate calculation problem on MPC5200 systems
...
* Add MPC8220 boards to MAKEALL script
* Add EEPROM and RTC support for HMI1001 board
* Patch by Detlev Zundel, 20 Jun 2005:
Fix initialization of low active GPIO pins on inka4x0 board
2005-06-27 13:30:03 +00:00
wdenk
a87589da74
* Add support for HMI1001 board
...
* Disable "date" and "sntp" commands on TQM866M which has no RTC
2005-06-10 10:00:19 +00:00
wdenk
ba91e26a19
Patch by Juergen Selent, 17 May 2005:
...
Add support for Funkwerk VoVPN gateway module.
2005-05-30 23:55:42 +00:00
wdenk
16b013e750
Patch by Greg Ungerer, 19 May 2005:
...
add support for the OpenGear CM4008 board
2005-05-19 22:46:33 +00:00
wdenk
121fc64022
Patch by Greg Ungerer, 19 May 2005:
...
add support for the OpenGear CM4008 board
2005-05-19 22:46:33 +00:00
wdenk
7680c140af
Add PCI support for Sorcery board.
...
Code cleanup (especially Sorcery / Alaska / Yukon serial driver).
2005-05-16 15:23:22 +00:00
wdenk
9dd41a7b0c
* Fix debug code in omap5912osk flash driver
...
* Add support for MPC8247 based "IDS8247" board.
2005-05-12 22:48:09 +00:00
wdenk
07cc099941
Major upate of JFFS2 code; now in sync with snapshot of MTD CVS of
...
March 13, 2005); new configuration options CONFIG_JFFS2_LZO and
CONFIG_JFFS2_LZARI are added. Both are undefined by default.
2005-05-05 00:04:14 +00:00
wdenk
a710d4be80
Use linker ASSERT statement to prevent undetected overlapping of
...
sections on PPChameleon board; other boards might use this, too.
2005-05-04 23:44:59 +00:00
stroese
dcb2f95a60
* Patch by Stefan Roese, 03 May 2005:
...
Update for P3G4
Fix problems in cmd_universe.c
2005-05-03 06:06:41 +00:00
wdenk
a63109281a
Fix bug in the SDRAM initialization code for canmb, IceCube and
...
PM520 boards.
Fix PHY address for canmb board.
2005-04-21 21:10:22 +00:00
wdenk
ec0ca73190
Cleanup serial console baudrate calculation on AT91RM9200
2005-04-20 12:36:05 +00:00
wdenk
b2323ea6f9
Auto-size RAM on canmb board.
...
Cleanup.
2005-04-20 09:28:54 +00:00
stroese
fddae7b811
* Patch by Matthias Fuchs, 18 Apr 2005:
...
Make PCI target address spaces on PMC405 and CPCI405 boards
configurable via environment variables
2005-04-20 06:52:40 +00:00
wdenk
5e5f9ed254
Add support for canmb board
2005-04-13 23:15:10 +00:00
stroese
04e93ec979
Update for esd apc405
2005-04-13 10:06:07 +00:00
wdenk
e694e08a8b
Cleanup
2005-04-07 22:41:05 +00:00
stroese
7ec2550238
* Patch by Stefan Roese, 06 Apr 2005:
...
Updates for OCOTEA board:
- Changed U-Boot size from 512kByte to 256kByte
- Fixed flash driver to support boot from soldered user flash
- Added README for switch from PIBS firmware to U-Boot
2005-04-07 05:35:12 +00:00
wdenk
a85f9f21aa
Patch by Steven Scholz, 06 Apr 2005:
...
- creating SoC subdir for Atmel AT91RM9200 cpu/arm920t/at91rm9200
- moving code out of cpu/at91rm9200 into cpu/arm920t/at91rm9200
2005-04-06 13:52:31 +00:00
wdenk
20787e23b8
* Patches by Robert Whaley, 29 Nov 2004:
...
- update the pxa-regs.h file for PXA27x chips
- add PXA27x based ADSVIX board
- add support for MMC on PXA27x processors
* Patch by Andrew E. Mileski, 28 Nov 2004:
Fix PPC4xx SPD SDRAM detection bug
* Patch by Hiroshi Ito, 26 Nov 2004:
Fix logic of "test -z" and "test -n" commands
2005-04-06 00:04:16 +00:00
wdenk
3c2b3d454d
* Patch by Ladislav Michl, 05 Apr 2005:
...
Add support for VoiceBlue board.
* Patch by Ladislav Michl, 05 Apr 2005:
Fix netboot_common() prototypes.
* Cleanup.
2005-04-05 23:32:21 +00:00
wdenk
12b43d515c
Add support for MPC8220 based "sorcery" board.
2005-04-05 21:57:18 +00:00
wdenk
f5c5ef4a1f
Add support for TQM8560 board
2005-04-05 16:26:47 +00:00
wdenk
8aa1a2d115
Patch by Steven Scholz, 4 Apr 2005:
...
- remove all references to CONFIG_INIT_CRITICAL for ARM based boards
- introduce two new configuration options instead:
CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT
2005-04-04 12:44:11 +00:00
wdenk
50712ba16e
* Patch by Mathias Küster, 23 Nov 2004:
...
add udelay support for the mcf5282 cpu
* Patch by Tolunay Orkun, 16 November 2004:
fix incorrect onboard Xilinx CPLD base address
2005-04-03 23:35:57 +00:00
wdenk
901787d6e8
Patch by Jerry Van Baren, 08 Nov 2004:
...
- Add low-boot option for MPC8260ADS board (if lowboot is selected,
the jumper for the HRCW source should select flash. If lowboot is
not selected, the jumper for the HRCW source should select the
BCSR.
- change default load base address to 0x00400000
2005-04-03 23:22:21 +00:00
wdenk
8b0bfc6804
* Patch by Yuli Barcohen, 08 Nov 2004:
...
Add support for Analogue & Micro Rattler boards.
Tested on Rattler8248.
* Patch by Andre Renaud, 08 Nov 2004:
Fix watchdog support in common/lcd.c
* Patch by Marc Leeman, 05 Nov 2003:
Enable all 4 PCMBRW buffers for the MPC8245 processor since the CPU
bug only affects the XPC8245 processors
2005-04-03 23:11:38 +00:00
wdenk
384cc68744
Patches by Josef Wagner, 29 Oct 2004:
...
- Add support for MicroSys CPU87 board
- Add support for MicroSys PM854 board
2005-04-03 22:35:21 +00:00
wdenk
756f586a73
* Patch by Yusdi Santoso, 22 Oct 2004:
...
- Add support for HIDDEN_DRAGON board
- fix endianess problem in driver/rtl1839.c
* Patch by Allen Curtis, 21 Oct 2004:
support multiple serial ports
2005-04-03 15:51:42 +00:00
wdenk
86c9888207
Patch by Steven Scholz, 03 Apr 2005:
...
- create SoC specific directories include/asm-arm/arch-imx and
include/asm-arm/arch-s3c24x0
2005-04-03 14:26:46 +00:00
wdenk
400558b561
Prepare for SoC rework of ARM code:
...
- rename CONFIG_BOOTBINFUNC into CONFIG_INIT_CRITICAL
- rename memsetup into lowlevel_init (function name and source files)
2005-04-02 23:52:25 +00:00
wdenk
414eec35e3
Fix problems with SNTP support;
...
enable SNTP support in some boards.
2005-04-02 22:37:54 +00:00
wdenk
be6b6e4e2d
Patch by Martin Krause, 01 Apr 2005:
...
Add automatic HW detection for CMC_PU2 and CMC_BASIC
2005-04-01 15:18:44 +00:00
wdenk
ef2807c667
Patch by Steven Scholz, 13 Dec 2004:
...
Remove duplicated code by merging memsetup.S files for
at91rm9200 boards into one cpu/at91rm9200/lowlevel.S
2005-03-31 23:44:33 +00:00
wdenk
8f0b7cbe80
Patches by Martin Krause, 22 Mar 2005:
...
- use TQM5200_auto as MAKEALL target for TQM5200 systems
- add support for SM501 graphics controller
- add support for graphic console on TQM5200
- add support for TQM5200 Rev 200
- cleanup, fix typo in include/configs/TQM5200.h
2005-03-27 23:41:39 +00:00
stroese
4d00eb0290
Update for esd auto_update and hh405 board
2005-03-17 15:41:17 +00:00
stroese
acdcd10c9a
Update for esd auto_update and hh405 board
2005-03-16 20:58:31 +00:00
wdenk
6c9e789e9e
Update code for TQM8540 board (and 85xx in general):
...
- Change the name of the Ethernet driver: MOTO ENET -> ENET
- Reformat boot messages
- Enable redundant environment
- Replace the -O2 optimization flag with -mno-string
2005-03-15 22:56:53 +00:00
wdenk
9d46ea4a55
* Patch by David Brownell, 10 Mar 2005:
...
Restore copyright statements in OHCI drivers.
* Add support for TQM8540 board
2005-03-14 23:56:42 +00:00
wdenk
c3fafecff1
Patch by Detlev Zundel, 14 Mar 2005:
...
NC650: changed NAND flash addressing to using UPMB
2005-03-14 23:01:03 +00:00
wdenk
a0bdf49e39
INKA4x0: Allow initialization of LCD backlight dimming from
...
"brightness" environment variable.
2005-03-14 13:14:58 +00:00
stroese
e9684a536a
Update for esd voh405 fpga image
2005-03-14 12:56:21 +00:00
wdenk
f4733a0764
Add port initialization for digital I/O on INKA4x0
2005-03-06 01:21:30 +00:00
wdenk
b05dcb58fe
* Fix get_partition_info() parameter error in all other calls
...
(common/cmd_ide.c, common/cmd_reiser.c, common/cmd_scsi.c).
* Enable USB and IDE support for INKA4x0 board
* Patch by Andrew Dyer, 28 February 2005:
fix ext2load passing an incorrect pointer to get_partition_info()
resulting in load failure for devices other than 0
2005-03-04 11:27:31 +00:00
stroese
47b1e3d77f
Update for esd boards dp405 and hub405
2005-03-01 17:26:39 +00:00
wdenk
151ab83a93
* Add support for ext2 filesystems and image timestamps to TQM5200 board
...
* Add reset code for Coral-P on INKA4x0 board
* Patch by Martin Krause, 28 Jun 2004:
Update for TRAB board.
* Fix some missing "volatile"s in MPC5xxx FEC driver
2005-02-24 22:44:16 +00:00
wdenk
436be29cad
* Update CPC45 board configuration.
...
* Add USB and PCI support for INKA4x0 board
2005-01-31 22:09:11 +00:00
wdenk
c3d2b4b48a
Code cleanup.
2005-01-22 18:13:04 +00:00
wdenk
5a95f6fbd2
* Patch by Robin Getz, 13 Oct 2004:
...
Add standalone application to change SMC91C111 MAC addresses,
see examples/README.smc91111_eeprom
* Patch by Xiaogeng (Shawn) Jin, 12 Oct 2004:
Fix Flash support for ARM Integrator CP.
2005-01-12 00:38:03 +00:00
wdenk
289f932c5f
* Some Cleanup.
...
* Patch by Richard Woodruff, 10 Jan 2005:
Update support for OMAP2420 (ARM11) and H4 board:
o clean up and add new types to H4 memory probe code.
o fix to work with internal boot.
o added PRCM config III operation.
o fix marginal flash timings.
o add revison ATAG usage.
o enable voltage scaling at power chip.
o fix compile error for i2c.
* Fix network problem (error when receiving multiple ARP packets)
2005-01-12 00:15:14 +00:00
wdenk
082acfd484
Coding Style cleanup
2005-01-10 00:01:04 +00:00
wdenk
652a10c096
* Patch by Daniel Poirot, 10 Oct 2004:
...
Add support for Wind River sbc405 board
* Patch by Rainer Brestan, 12 Oct 2004:
Make examples/Makefile more robust
2005-01-09 23:48:14 +00:00
wdenk
6225c5db6c
* Patch by Sam Song, 11 October 2004:
...
- Add RESET/PREBOOT/AUTOBOOT support for RPXlite_DW board
- Adjust CPU:BUS frequency ratio 1:1 when core frequency
less than 50MHz
* Patch by Sam Song, 10 Oct 2004:
Fix a parameter error in run_command() in main.c
2005-01-09 23:33:49 +00:00
wdenk
8ed9604613
* Patches by Richard Woodruff, 01 Oct 2004:
...
add support for the TI OMAP2420 processor and its H4 reference
board
* Patch by Christian Pellegrin, 24 Sep 2004:
Added support for NE2000 compatible (DP8390, DP83902) NICs.
2005-01-09 23:16:25 +00:00
wdenk
ff36fd8591
* Patch by Leif Lindholm, 23 Sep 2004:
...
add support for the AMD db1550 board
* Patch by Travis Sawyer, 15 Sep 2004:
Add CONFIG_SERIAL_MULTI support for ppc4xx,
update README.serial_multi
2005-01-09 22:28:56 +00:00
wdenk
6310eb9da7
Patches by David Snowdon, 07 Sep 2004:
...
- add u-boot.hex target in the top level Makefile
- add support for the UNSW/NICTA PLEB 2 board (pleb2)
- use -mtune=xscale and -march=armv5 options for PXA
2005-01-09 21:28:15 +00:00
wdenk
a562e1bd9d
Patch by Florian Schlote, 08 Sep 2004:
...
Add support for SenTec-COBRA5272-board (Coldfire).
2005-01-09 18:21:42 +00:00
wdenk
9dd611b8c1
* Patch by Kurt Stremerch, 03 Sep 2004:
...
Add Xilinx Spartan2E family FPGA support
* Patch by Jeff Angielski, 02 Sep 2004:
Add Added support for H2 revision of the EP8260 board.
Fixed formatting for some of the EP8260 related source files.
2005-01-09 17:19:34 +00:00
wdenk
a1191902ca
* Patch by Jon Loeliger, 02 Sep 2004:
...
Reset monitor size back to 256 so environment can be written
to flash on MPC85xx ADS and CDS releases.
* Patch by Paolo Broggini, 02 Sep 2004:
Make BSS clearing on ARM systems more robust
* Patch by Yue Hu and Joe, 01 Sep 2004:
- add PCI support for ixp425;
- add EEPRO100 suppor tfor ixdp425 board.
* Fix problem with protected sector detection in driver/cfi_flash.c
2005-01-09 17:12:27 +00:00
wdenk
e2ffd59b4d
* Code cleanup, mostly for GCC-3.3.x
...
* Cleanup confusing use of CONFIG_ETH*ADDR - ust his only to
pre-define a MAC address; use CONFIG_HAS_ETH* to enable support for
additional ethernet addresses.
* Cleanup drivers/i82365.c - avoid duplication of code
* Fix bogus "cannot span across banks" flash error message
* Add support for CompactFlash for the CPC45 Board.
2004-12-31 09:32:47 +00:00
wdenk
400ab719c6
Fix problems with CMC_PU2 flash driver.
2004-12-20 11:18:07 +00:00
wdenk
08f272787a
* Fix problems with CMC_PU2 flash driver.
...
* Adjust INKA 4x0 default settings
2004-12-19 21:39:27 +00:00
wdenk
f7d1572bf5
Add support for UC100 board
2004-12-18 22:35:43 +00:00
stroese
8e6b47a89b
One more code cleanup.
2004-12-17 09:13:49 +00:00
wdenk
efe2a4d5cf
Code cleanup.
2004-12-16 21:44:03 +00:00
stroese
bea8e84b52
PCI405 board update
2004-12-16 19:10:22 +00:00
stroese
917b8cc41c
AR405 board update
2004-12-16 19:00:32 +00:00
stroese
0621f6f9d3
esd common update
2004-12-16 18:43:13 +00:00
stroese
cd5396fa12
VOH405 board update
2004-12-16 18:41:27 +00:00
stroese
4510a7b736
PMC405 board update
2004-12-16 18:40:02 +00:00
stroese
12537cc5a9
PLU405 board update
2004-12-16 18:39:03 +00:00
stroese
c2642d14c9
PCI405 board update
2004-12-16 18:38:22 +00:00
stroese
25215ee2b0
OCRTC board update
2004-12-16 18:37:41 +00:00
stroese
31193c2cca
HUB405 board update
2004-12-16 18:37:08 +00:00
stroese
ab379df353
DU405 board update
2004-12-16 18:36:28 +00:00
stroese
f2dfe44fd6
DP405 board update
2004-12-16 18:35:58 +00:00
stroese
20aacbf018
CPCIISER4 board update
2004-12-16 18:35:14 +00:00
stroese
7acd6c2168
CPCI440 board update
2004-12-16 18:34:28 +00:00
stroese
c491b442cc
CANBT board update
2004-12-16 18:33:45 +00:00
stroese
86cf82e07f
ASH405 board update
2004-12-16 18:33:12 +00:00
stroese
8d3efe4e9a
AR405 board update
2004-12-16 18:30:36 +00:00
stroese
e399e4c670
ADCIOP board update
2004-12-16 18:27:51 +00:00
stroese
87663b1cbc
CPCI405 board update
2004-12-16 18:27:05 +00:00
stroese
6cfb1f0da6
WUH405 board support added
2004-12-16 18:25:40 +00:00
stroese
809ac5e7b0
VOM405 board support added
2004-12-16 18:24:54 +00:00
stroese
8d8f894b51
TASREG board support added
2004-12-16 18:24:06 +00:00
stroese
1f54ce6df8
HH405 board support added
2004-12-16 18:23:14 +00:00
stroese
771e05be07
CPCI750 board support added
2004-12-16 18:21:17 +00:00
stroese
1bc0f14143
APC405 board support added
2004-12-16 18:20:14 +00:00
stroese
aee2fa27d9
G2000 board support added
2004-12-16 18:17:50 +00:00
wdenk
138ff60c1e
Add support for INKA4X0 board
2004-12-16 15:52:40 +00:00
wdenk
45ea3fca4a
Cleanup for CMC_PU2 board
2004-12-14 23:28:24 +00:00
wdenk
689aec1b05
Patch by Steven Scholz, 12 Dec 2004:
...
Fix typo in AT91 memory setup.
2004-12-13 00:18:44 +00:00
wdenk
7e6bf358d8
Patch by Martin Krause, 27 Oct 2004:
...
- add support for "STK52xx" board (including PS/2 multiplexer)
- add hardware detection for TQM5200
2004-12-12 22:06:17 +00:00
wdenk
25d6712a81
* Clean up CMC PU2 flash driver
...
* Update MAINTAINERS file
* Fix bug in MPC823 LCD driver
2004-12-10 11:40:40 +00:00
wdenk
ed54e62125
* Fix udelay() on AT91RM9200 for delays < 1 ms.
...
* Enable long help on CMC PU2 board;
fix reset issue;
increase CPU speed from 179 to 207 MHz.
2004-11-24 23:35:19 +00:00
wdenk
9d5028c2f7
* Update for AT91RM9200DK and CMC_PU2 boards:
...
- Enable booting directly from flash
- fix CMC_PU2 flash driver
* Fix mkimage usage message
2004-11-21 00:06:33 +00:00
wdenk
983fda8391
Patch by TsiChung Liew, 23 Sep 2004:
...
- add support for MPC8220 CPU
- Add support for Alaska and Yukon boards
2004-10-28 00:09:35 +00:00
wdenk
e3c9b9f928
* Fix configuration for ERIC board (needs more room)
...
* Adjust MIPS compiler options at run-time depending on tools version
("-march=4kc -mtune=4kc -Wa,-mips_allow_branch_to_undefined" for new,
"-mcpu=4kc" for old tools)
2004-10-24 23:54:40 +00:00
wdenk
e86e5a0748
Code cleanup for GCC-3.3.x compilers
2004-10-17 21:12:06 +00:00
wdenk
8b74bf31fe
Cleanup
2004-10-11 23:10:30 +00:00
wdenk
4cfaf55e5c
* Enable NAND flash support for NC650 board.
...
* Patch by Thomas Lange 07 Oct 2004:
Updated README for DBAu1x00 boards to match current status
2004-10-11 23:03:10 +00:00
wdenk
d407bf52b5
* Patch by Philippe Robin, 28 Sept 2004:
...
Fix Flash support for Versatile.
* Patch by Roger Blofeld, 16 Sep 2004:
Fix timeout for DHCP command retry
2004-10-11 22:51:13 +00:00
wdenk
c15f3120ec
* Patch by Michael Bendzick, 30 Aug 2004:
...
- Improve platform.S code for omap1510inn that detects whether code
is running from SDRAM or not. Patch allows SDRAM to be configured
if code is running out of SRAM at 0x20000000.
* Patch by Frederick Klatt, 30 Aug 2004:
Add support for the Wind River SBC8540/SBC8560 boards
2004-10-10 22:44:24 +00:00
wdenk
656658dd15
* Configure SX1 board to use drivers/cfi_flash.c
...
* Patches by Michael Bendzick, 30 Aug 2004:
- Configure omap1510inn board to use drivers/cfi_flash.c
- Make drivers/cfi_flash.c protect environment and redundant
environment.
* Patch by Steven Scholz, 23 Jun 2004:
- Add script (tools/img2brec.sh) to programm U-Boot into
(Synch)Flash using the Bootstrap Mode of the MC9328MX1/L
2004-10-10 22:16:06 +00:00
wdenk
5c952cf024
Patches by Scott McNutt, 24 Aug 2004:
...
- Add support for Altera Nios-II processors.
- Add support for Psyent PCI-5441 board.
- Add support for Psyent PK1C20 board.
2004-10-10 21:27:30 +00:00
wdenk
03f5c55021
Patches by Jon Loeliger, 24 Aug 2004:
...
- Add support for the MPC8541 and MPC8555 CDS boards
- Cleanup eth?addr handling: make dependent on CONFIG_ETH?ADDR
2004-10-10 21:21:55 +00:00
wdenk
cf33678e51
* Patch by Jon Loeliger, 24 Aug 2004:
...
- Fix PCI window on MPC85xx; remove unneeded PCI initialization
from board_early_init_f()
- Provide SW workaround for PCI initialization on 85xx CDS
- Convert MPC85xxADS to use common CFI flash driver
* Cleanup: avoid compiler warnings
* Add CMC PU2 board to MAKEALL script
2004-10-10 20:23:57 +00:00
wdenk
731215ebde
Patch by George G. Davis, 24 Aug 2004:
...
- update ARM boards to use constants from mach-types.h
2004-10-10 18:41:04 +00:00
wdenk
b65085130a
Code Cleanup
...
Patch by Gary Jennejohn, 04 Oct 2004:
- fix I2C on at91rm9200
- add support for Ricoh RS5C372A RTC
2004-10-10 18:03:33 +00:00
wdenk
2cbe571a56
* Patch by Gary Jennejohn, 01 Oct 2004:
...
- add support for CMC PU2 board
- add support for I2C on at91rm9200
* Patch by Gary Jennejohn, 28 Sep 2004:
fix baudrate handling on at91rm9200
2004-10-10 17:05:18 +00:00
wdenk
659883c298
Patch by Yuli Barcohen, 22 Aug 2004:
...
- remove ZPC.1900 board-specific flash driver;
switch the port to generic CFI driver;
- port clean-up
2004-10-09 23:33:42 +00:00