Commit graph

878 commits

Author SHA1 Message Date
Marek Behún
e8bb990fe7 ARM: imx8m: fix imx_eqos_txclk_set_rate() type mismatch for LTO
When building imx8mp_evk_defconfig with LTO, the compiler complains
about type mismatch of function imx_eqos_txclk_set_rate() in file
  drivers/net/dwc_eth_qos.c:845:12
which contains a weak definition of this function, vs file
  arch/arm/mach-imx/imx8m/clock_imx8mm.c
which contains an implementation.

Change the type of this function in the implementation to fix this.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-05-24 14:21:30 -04:00
Marek Behún
86c5e21013 ARM: make gd a function call for LTO and set via set_gd()
On ARM, the gd pointer is stored in registers r9 / x18. For this the
-ffixed-r9 / -ffixed-x18 flag is used when compiling, but using global
register variables causes errors when building with LTO, and these
errors are very difficult to overcome.

Richard Biener says [1]:
  Note that global register vars shouldn't be used with LTO and if they
  are restricted to just a few compilation units the recommended fix is
  to build those CUs without -flto.

We cannot do this for U-Boot since all CUs use -ffixed-reg flag.

It seems that with LTO we could in fact store the gd pointer differently
and gain performance or size benefit by allowing the compiler to use
r9 / x18. But this would need more work.

So for now, when building with LTO, go the clang way, and instead of
declaring gd a global register variable, we make it a function call via
macro.

[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=68384

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-24 14:21:30 -04:00
Ilko Iliev
7666cccf4f ARM:imx:imx8mq-cm: Add support for Ronetix iMX8MQ-CM
Supported peripherals: Ethernet, eMMC, Serial.

U-Boot SPL 2021.04-00911-g5fa1e2ffeb-dirty (Apr 23 2021 - 09:11:14
+0200)
Normal Boot
Trying to boot from MMC2

U-Boot 2021.04-00911-g5fa1e2ffeb-dirty (Apr 23 2021 - 09:11:14 +0200)

CPU:   Freescale i.MX8MQ rev2.1 at 1000 MHz
Reset cause: POR
Model: Ronetix iMX8M-CM SoM
DRAM:  1 GiB
WDT:   Started with servicing (60s timeout)
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
Loading Environment from MMC... OK
In:    serial
Out:   serial
Err:   serial
Net:
Warning: ethernet@30be0000 (eth0) using random MAC address -
42:0d:e7:78:da:53
eth0: ethernet@30be0000
Hit any key to stop autoboot:  0
u-boot=>

Signed-off-by: Ilko Iliev <iliev@ronetix.at>
2021-05-02 12:46:54 +02:00
Ilko Iliev
fdd2f359e4 imx: Add support for Ronetix's iMX7-CM board
Console boot log:

U-Boot SPL 2021.04-00836-ga6232e065d-dirty (Apr 16 2021 - 15:16:35 +0200)
Trying to boot from MMC1

U-Boot 2021.04-00836-ga6232e065d-dirty (Apr 16 2021 - 15:16:35 +0200)

CPU:   Freescale i.MX7D rev1.3 1000 MHz (running at 792 MHz)
CPU:   Commercial temperature grade (0C to 95C) at 44C
Reset cause: POR
Model: Ronetix iMX7-CM Board
Board: iMX7-CM
DRAM:  512 MiB
PMIC:  PFUZE3000 DEV_ID=0x30 REV_ID=0x11
MMC:   FSL_SDHC: 0, FSL_SDHC: 2
Loading Environment from MMC... OK
In:    serial
Out:   serial
Err:   serial
Net:
Warning: ethernet@30be0000 (eth0) using random MAC address - fe:be:37:01:5a:3f
eth0: ethernet@30be0000
Hit any key to stop autoboot:  0

Signed-off-by: Ilko Iliev <iliev@ronetix.at>
2021-05-02 12:46:54 +02:00
Tim Harvey
35fc3713a3 imx: mkimage_fit_atf: fix file size reporting
instead using ls and awk to determine file size use stat instead.
This fixes an invalid size reporting for user or group names that have
spaces in them.

This adds a dependency on the stat application which is part of
the coreutils package which also includes ls.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-05-02 12:46:54 +02:00
Ying-Chun Liu (PaulLiu)
53b516c58d arm: imx8m: add support for Compulab iot-gate-imx8 (imx8mm-cl-iot-gate)
Add initial support for Compulab iot-gate-imx8 board (imx8mm-cl-iot-gate).
The initial support includes:
 - MMC
 - eMMC
 - I2C
 - FEC
 - Serial console

Signed-off-by: Kirill Kapranov <kirill.kapranov@compulab.co.il>
Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
Signed-off-by: Valentin Raevsky <valentin@compulab.co.il>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
Cc: Peter Robinson <pbrobinson@gmail.com>
2021-05-02 12:46:54 +02:00
Jagan Teki
7e0daa924a board: imx8mm: Add Engicam i.Core MX8M Mini C.TOUCH 2.0
Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose Carrier
board.

Genaral features:
- Ethernet 10/100
- Wifi/BT
- USB Type A/OTG
- Audio Out
- CAN
- LVDS panel connector

i.Core MX8M Mini is an EDIMM SoM based on NXP i.MX8M Mini from Engicam.

i.Core MX8M Mini needs to mount on top of this Carrier board for
creating complete i.Core MX8M Mini C.TOUCH 2.0 board.

Linux dts commit details:

commit <a142252061ff> ("arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini
C.TOUCH 2.0")

Add support for it.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-05-02 12:46:54 +02:00
Jagan Teki
e3409a4cb7 board: imx8mm: Add Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit
Engicam EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive
Evaluation Board.

Genaral features:
- LCD 7" C.Touch
- microSD slot
- Ethernet 1Gb
- Wifi/BT
- 2x LVDS Full HD interfaces
- 3x USB 2.0
- 1x USB 3.0
- HDMI Out
- Mini PCIe
- MIPI CSI
- 2x CAN
- Audio Out

i.Core MX8M Mini is an EDIMM SoM based on NXP i.MX8M Mini from Engicam.

i.Core MX8M Mini needs to mount on top of this Evaluation board for
creating complete i.Core MX8M Mini EDIMM2.2 Starter Kit.

Linux dts commit details:

commit <051c08eea682> ("arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini
EDIMM2.2 Starter Kit")

Add support for it.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-05-02 12:46:54 +02:00
Tom Rini
4bbcec08eb arm: Remove mx6dlarm2 board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Jason Liu <jason.hui.liu@nxp.com>
Cc: Ye Li <ye.li@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:03:55 -04:00
Tom Rini
178d70b5b3 arm: Remove cgtqmx6eval board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:03:55 -04:00
Tom Rini
defd0dcfb9 arm: Remove titanium board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:03:55 -04:00
Tom Rini
80b386abe3 arm: Remove ts4800 board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Lucile Quirion <lucile.quirion@savoirfairelinux.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:03:55 -04:00
Tom Rini
4d24862848 arm: Remove mx53evk board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Jason Liu <jason.hui.liu@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:03:30 -04:00
Tom Rini
397a43dc56 arm: Remove pfla02 board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:03:30 -04:00
Tom Rini
a0cacddcaf arm: Remove zc5202 and zc5601 boards
These boards have not been converted to CONFIG_DM_MMC by the deadline.
Remove them.

Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:03:29 -04:00
Tom Rini
ddfc004009 arm: Remove xpress board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:02:03 -04:00
Tom Rini
96f599009a arm: Remove platinum_picon board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:01:10 -04:00
Tom Rini
56124508ce arm: Remove secomx6quq7 board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:00:45 -04:00
Tom Rini
be3dec48b0 arm: Remove ts4600 board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 07:59:35 -04:00
Tom Rini
0fa6bafa89 arm: Remove sc_sps_1 board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 07:59:34 -04:00
Tom Rini
b40186fc7e arm: Remove SANSA_FUZE_PLUS board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 07:59:34 -04:00
Tom Rini
539fba2c10 arm: Remove xfi3 board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 07:59:30 -04:00
Tom Rini
c861d21cba arm: Remove ot1200 board
This board relies on using CONFIG_LIBATA but does not enable CONFIG_AHCI.  The
deadline for this conversion was the v2019.07 release.  In order to
convert to using the DWC SATA driver under DM further migrations are
required.

Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2021-04-10 07:57:42 -04:00
Tom Rini
d8d3b77fc2 arm: Remove dms-ba16 board
This board relies on using CONFIG_LIBATA but does not enable CONFIG_AHCI.  The
deadline for this conversion was the v2019.07 release.  The use of CONFIG_AHCI
requires CONFIG_DM.  The deadline for this conversion was v2020.01.  Remove
this board.

Cc: Akshay Bhat <akshaybhat@timesys.com>
Cc: Ken Lin <Ken.Lin@advantech.com.tw>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 07:57:29 -04:00
Max Krummenacher
2fc93e5baf imx: bootaux fix elf loading
This reverts the arch/arm/mach-imx/imx_bootaux.c changes of commit
805b3cac1e. The loader function name was changed so that it does
not clash with the generically available function in lib/elf.c.

imx-bootaux loads an elf file linked for an auxilary core. Thus the
loader function requires address translation from the auxilary core's
address space to where those are mapped into U-Boot's address space.

So the elf loader is specific and must not be replaced with a generic
loader which doesn't provide the address translation functionality.

Fixes commit 805b3cac1e ("lib: elf: Move the generic elf
loading/validating functions to lib")

Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2021-04-08 23:59:50 +02:00
Marek Vasut
09d86eab14 ARM: imx: Add OCRAM_S into iMX8M MMU tables
The OCRAM_S is regular memory, just like the OCRAM, add it to the MMU
tables so it can be used and cached.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2021-04-08 20:29:53 +02:00
Peng Fan
1e4ed2d69d imx8mp-evk: switch to use binman
Use binman to pack images

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08 20:29:53 +02:00
Peng Fan
d6afc6b3a0 imx8mn-evk: switch to use binman
Use binman to pack images.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08 20:29:53 +02:00
Peng Fan
353dfe4b43 imx8mn-ddr4-evk: switch to use binman
Use binman to pack images

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08 20:29:53 +02:00
Peng Fan
8996e6b7c6 imx8mm_evk: switch to use binman to pack images
Use binman to pack images

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08 20:29:53 +02:00
Clement Faure
69f542ca2b imx8: Add DEK blob encapsulation
Add DEK encapsulation support for imx8. The DEK blob is generated by the
SECO through the SCFW API.

Signed-off-by: Clement Faure <clement.faure@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08 20:29:52 +02:00
Clement Faure
56d2050f40 imx8m: Add DEK blob encapsulation for imx8m
Add DEK blob encapsulation support for IMX8M through "dek_blob" command.
On ARMv8, u-boot runs in non-secure, thus cannot encapsulate a DEK blob
for encrypted boot.
The DEK blob is encapsulated by OP-TEE through a trusted application call.
U-boot sends and receives the DEK and the DEK blob binaries through OP-TEE
dynamic shared memory.

To enable the DEK blob encapsulation, add to the defconfig:
CONFIG_SECURE_BOOT=y
CONFIG_FAT_WRITE=y
CONFIG_CMD_DEKBLOB=y

Signed-off-by: Clement Faure <clement.faure@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08 20:29:52 +02:00
Clement Le Marquis
613cf239ed imx: caam: new u-boot command to set PRIBLOB bitfield from CAAM SCFGR register to 0x3
It is highly recommended to set the PRIBLOB bitfield to 0x3 once your
encrypted boot image has booted up, this prevents the generation of new
blobs that can be used to decrypt an encrypted boot image. The PRIBLOB is
a sticky type bit and cannot be changed until the next power on reset.

Add the set_priblob_bitfield U-Boot command to prevent the generation of
new blobs.

Signed-off-by: Clement Le Marquis <clement.lemarquis@nxp.com>
Acked-by: Ye Li <Ye.Li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08 20:29:52 +02:00
Aymen Sghaier
940d36d5d1 crypto: caam: Add CAAM support to i.MX8M platforms
This patch enable CAAM support for i.MX8M platforms.

Signed-off-by: Aymen Sghaier <aymen.sghaier@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08 09:18:29 +02:00
Franck LENORMAND
b543800241 caam: enable support for iMX7ULP
Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08 09:18:29 +02:00
Ye Li
e149b98c11 imx: cmd_dek: Enable DEK only for chips supporting CAAM
Since cmd_dek is using CAAM JR, so enable the CMD_DEK only when
HAS_CAAM is set

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08 09:18:29 +02:00
Ye Li
41b230bf29 iMX8M: Add support to enable CONFIG_IMX_HAB
Add some SOC level codes and build configurations to use HAB lib for
CONFIG_IMX_HAB (secure boot), like adding the SEC_CONFIG fuse, enable
fuse driver, CAAM clock function, and add CAAM secure RAM to MMU table.

The FSL_CAAM is temporally not enabled for iMX8M when CONFIG_IMX_HAB is set,
because we don't need the CAAM driver for SPL.

Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08 09:18:29 +02:00
Breno Lima
e449e2d405 imx: hab: Fix build warnings in 32-bit targets
When building 32-bit targets with CONFIG_SECURE_BOOT and DEBUG enabled
the following warnings are displayed:

arch/arm/mach-imx/hab.c:840:41: warning: format '%lx' expects argument \
of type 'long unsigned int', but argument 3 has type 'uint32_t \
{aka unsigned int}' [-Wformat=]
   printf("HAB check target 0x%08x-0x%08lx fail\n",
                                     ~~~~^
                                     %08x
          ddr_start, ddr_start + bytes);

arch/arm/mach-imx/hab.c:845:45: warning: format '%x' expects argument \
of type 'unsigned int', but argument 3 has type 'ulong \
{aka long unsigned int}' [-Wformat=]
  printf("\nivt_offset = 0x%x, ivt addr = 0x%x\n", ivt_offset, ivt_addr);
                                            ~^
                                            %lx

Fix warnings by providing the correct data type.

Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Breno Lima <breno.lima@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08 09:18:29 +02:00
Breno Lima
58f75efeaf mx7ulp: hab: Add hab_status command for HABv4 M4 boot
When booting in low power or dual boot modes the M4 binary is
authenticated by the M4 ROM code.

Add an option in hab_status command so users can retrieve M4 HAB
failure and warning events.

=> hab_status m4

   Secure boot disabled

   HAB Configuration: 0xf0, HAB State: 0x66
   No HAB Events Found!

Add command documentation in mx6_mx7_secure_boot.txt guide.

As HAB M4 API cannot be called from A7 core the code is parsing
the M4 HAB persistent memory region. The HAB persistent memory
stores HAB events, public keys and others HAB related information.

The HAB persistent memory region addresses and sizes can be found
in AN12263 "HABv4 RVT Guidelines and Recommendations".

Reviewed-by: Utkarsh Gupta <utkarsh.gupta@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Breno Lima <breno.lima@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08 09:18:29 +02:00
Breno Lima
f217470b39 imx: hab: Check if IVT header is HABv4
The HABv4 implementation in ROM checks if HAB major version
in IVT header is 4.x.

The current implementation in hab.c code is only validating
HAB v4.0 and HAB v4.1 and may be incompatible with newer
HABv4 versions.

Modify verify_ivt_header() function to align with HABv4
implementation in ROM code.

Signed-off-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08 09:18:29 +02:00
Utkarsh Gupta
cd8355664d imx: hab: Display All HAB events via hab_status command
Add ability for hab_status command to show All HAB events and not just
HAB failure events

Signed-off-by: Utkarsh Gupta <utkarsh.gupta@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08 09:18:29 +02:00
Breno Lima
1d756add3c imx: hab: Enable hab.c to authenticate additional images in open configuration
Currently it's not possible to authenticate additional boot images in HAB
open configuration.

The hab.c code is checking if the SEC_CONFIG[1] fuse is programmed prior
to calling the hab_authenticate_image() API function. Users cannot check
if their additional boot images has been correctly signed prior to closing
their device.

Enable hab.c to authenticate additional boot images in open mode so HAB
events can be retrieved through get_hab_status() function.

Signed-off-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08 09:18:29 +02:00
Ye Li
1dc295148a hab: Change calling to ROM API failsafe
Modify to use hab_rvt_failsafe function for failsafe ROM API, not
directly call its ROM address. This function will wrap the sip call for iMX8M
platforms.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08 09:18:29 +02:00
Utkarsh Gupta
fe8acf556c imx: HAB: Validate IVT before authenticating image
Calling csf_is_valid() with an un-signed image may lead to data abort
as the CSF pointer could be pointing to a garbage address when accessed
in HAB_HDR_LEN(*(const struct hab_hdr *)(ulong)ivt_initial->csf).

Authenticate image from DDR location 0x80800000...
Check CSF for Write Data command before authenticating image
data abort
pc : [<fff5494c>]          lr : [<fff54910>]
reloc pc : [<8780294c>]    lr : [<87802910>]
sp : fdf45dc8  ip : 00000214     fp : 00000000
r10: fffb6170  r9 : fdf4fec0     r8 : 00722020
r7 : 80f20000  r6 : 80800000     r5 : 80800000  r4 : 00720000
r3 : 17a5aca3  r2 : 00000000     r1 : 80f2201f  r0 : 00000019
Flags: NzcV  IRQs off  FIQs off  Mode SVC_32
Resetting CPU ...

resetting ...

To avoid such errors during authentication process, validate IVT structure
by calling validate_ivt function which checks the following values in an IVT:

IVT_HEADER = 0x4X2000D1
ENTRY != 0x0
RES1 = 0x0
DCD = 0x0       /* Recommended */
SELF != 0x0     /* Absoulute address of IVT */
CSF != 0x0
RES2 = 0x0

This commit also checks if Image's start address is 4 byte aligned.

commit "0088d127 MLK-14945 HAB: Check if IVT valid before authenticating image"
removed as this patch addresses the issue.

Signed-off-by: Utkarsh Gupta <utkarsh.gupta@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08 09:18:29 +02:00
Peng Fan
507da978fa imx: HAB: Update hab codes to support ARM64 and i.MX8M
There are some changes to support ARM64 i.MX8M platform in this patches:
1. The hab_rvt base and function vectors are different as i.MX6/7

2. Need to bypass an workaround for i.MX6 to fix problem in MMU.

3. The x18 register needed save & restore before calling any HAB API. According
   to ARM procedure call spec, the x18 is caller saved when it is used as
   temporary register. So calling HAB API may scratch this register, and
   cause crash once accessing the gd pointer.

   On ARMv7, the r9 is callee saved when it is used as variable register. So
   no need to save & restore it.

4. Add SEC_CONFIG fuse for iMX8M

When current EL is not EL3, the direct calling to HAB will fail because
CAAM/SNVS can't initialize at non-secure mode. In this case, we use
SIP call to run the HAB in ATF.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08 09:18:29 +02:00
Ye Li
c428ca80c2 imx: hab: Add function to authenticate kernel image
When loading kernel image, the image size is parsed from header, so it
does not include the CSF and IVT.

Add back the authenticate_image function to wrap the imx_hab_authenticate_image
with calculating IVT offset and full image size.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08 09:18:29 +02:00
Breno Lima
55086e196e imx: Avoid hardcoded Job Ring Max size
Prior instantiating RNG we have to ensure if the CAAM job rings are
available. Avoid hardcoded job ring max size and use the definition at
fsl_sec.h

Signed-off-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08 09:18:29 +02:00
Breno Lima
6d7b270337 imx: Ensure CAAM clock is enabled prior getting out_jr_size
Prior calling sec_in32() we have to ensure CAAM clock is enabled, the
function sec_in32() is reading CAAM registers and if CAAM clock is disabled
the system will hang.

Signed-off-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08 09:18:29 +02:00
Breno Lima
8c497e148c imx: Avoid hardcoded output ring size register offset (ORSR)
The CAAM output ring size register offset is currently defined in fsl_sec.h
as FSL_CAAM_ORSR_JRa_OFFSET, use this definition to avoid hardcoded value in
i.MX common code.

Signed-off-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08 09:18:29 +02:00
Breno Lima
30e39ac7c9 imx: imx7 Support for Manufacturing Protection
This code was originally developed by Raul Cardenas <raul.casas@nxp.com>
and modified to be applied in U-Boot imx_v2017.03.

More information about the initial submission can be seen
in the link below:
https://lists.denx.de/pipermail/u-boot/2016-February/245273.html

i.MX7D has an a protection feature for Manufacturing process.
This feature uses asymmetric encryption to sign and verify
authenticated software handled between parties. This command
enables the use of such feature.

The private key is unique and generated once per device.
And it is stored in secure memory and only accessible by CAAM.
Therefore, the public key generation and signature functions
are the only functions available for the user.

The manufacturing-protection authentication process can be used to
authenticate the chip to the OEM's server.

Command usage:

Print the public key for the device.
- mfgprot pubk

Generates Signature over given data.
- mfgprot sign <data_address> <data_size>

Signed-off-by: Raul Ulises Cardenas <raul.casas@nxp.com>
Signed-off-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08 09:18:29 +02:00
Ye Li
ea2b26fb12 iMX8MQ: Recognize the B2 revision
i.MX8MQ B2 is using same value in OCOTP_READ_FUSE_DATA like B1, so
we have to check the ROM verision to distinguish the revision.

As we have checked the B1 rev for sticky bits work around in
secure boot. So it won't apply on B2.

Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08 09:18:29 +02:00
Peng Fan
c0e2f76b69 imx8m: soc: update fuse path
Update fuse path to disable modules correctly.

Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08 09:18:29 +02:00
Ye Li
4e83c05722 imx8m: Update thermal and PMU kernel nodes for dual/single cores
For dual core and single core iMX8M parts, the thermal node and PMU node
in kernel DTB also needs update to remove the refers to deleted core nodes.
Otherwise both driver will fail to work.

Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08 09:18:29 +02:00
Ye Li
c4f78cbf0e imx8mn: Add support for 11x11 UltraLite part number
There are 3 part numbers for 11x11 i.MX8MNano with different core number
configuration: UltraLite Quad/Dual/Solo

Comparing with i.MX8MN Lite parts, they have MIPI DSI disabled. So
checking the MIPI DSI disable fuse to recognize these parts.

Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08 09:18:29 +02:00
Ye Li
98bcdf1635 imx8mn: Add low drive mode support for DDR4/LPDDR4 EVK
Add dedicated defconfigs for iMX8MN low drive mode which set the VDD_SOC
and VDD_DRAM to 0.8v, DDR at 1600MTS (800Mhz clock) and GPU at 200Mhz.

Signed-off-by: Ye Li <ye.li@nxp.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08 09:18:29 +02:00
Peng Fan
4e805c197b imx8mn: Add LPDDR4 EVK board support
Add support for iMX8MN LPDDR4 EVK board which uses 2GB LPDDR4 and
PCA9450B PMIC.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08 09:18:29 +02:00
Tom Rini
22fc991daf Prepare v2021.04-rc4
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAmBPhiUACgkQFHw5/5Y0
 tywChgv/RYpdSKrD5s4kCJnImfOwDznESj/CqAQK3Au5zviq7qXRrgxyTKv2e1wM
 W51vUBd0cE1YTACXqbr92wSSyqoTthLqd57KQgVele5uC2dvkqVTSvjPOUwtyIbQ
 BTPkoQnHPn30AILRdPjpEdBGfZhJDDtJFdQopn6h4GjEjPKVH8Wx1Dd+V6SD5f20
 WiksUjgdjMr1AmORY+LdwwJO8FZrGGPYgs8CDtiqxmCSwh3d7kUFFTT+G23BZdo7
 M+81+1uIUaW2Bolds7ZTPrrjr8bPwkWoTqNYhUB4bNPLp72gwnjM1rtU1X3hyiJM
 MdxSBimLHUOYPihfeSYCHSUrJaQFAAEFkuzWfZN1fgoswKEZQIVVVTzT/TomTyqf
 1DIXD+0HpXGKgVLW/Nkpl4D+UFjR865XI4kiuDxddjKI7bGbvDlbZ/k3PNelD7op
 umUswHnC3OTSw/g+A9VH/zf1rMFNLfu++vD7XJtdoWlcsl6x6/6Fh75tuC6K/X0K
 caPmehD3
 =ENym
 -----END PGP SIGNATURE-----

Merge tag 'v2021.04-rc4' into next

Prepare v2021.04-rc4
2021-03-15 12:15:38 -04:00
Tim Harvey
03bf8436a3 board: gateworks: imx8mm: Add Gateworks Venice board support
Add initial support for Gateworks Venice product family based on the
i.MX 8M Mini SoC

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-03-03 14:15:02 +01:00
Harald Seiler
35b65dd8ef reset: Remove addr parameter from reset_cpu()
Historically, the reset_cpu() function had an `addr` parameter which was
meant to pass in an address of the reset vector location, where the CPU
should reset to.  This feature is no longer used anywhere in U-Boot as
all reset_cpu() implementations now ignore the passed value.  Generic
code has been added which always calls reset_cpu() with `0` which means
this feature can no longer be used easily anyway.

Over time, many implementations seem to have "misunderstood" the
existence of this parameter as a way to customize/parameterize the reset
(e.g.  COLD vs WARM resets).  As this is not properly supported, the
code will almost always not do what it is intended to (because all
call-sites just call reset_cpu() with 0).

To avoid confusion and to clean up the codebase from unused left-overs
of the past, remove the `addr` parameter entirely.  Code which intends
to support different kinds of resets should be rewritten as a sysreset
driver instead.

This transformation was done with the following coccinelle patch:

    @@
    expression argvalue;
    @@
    - reset_cpu(argvalue)
    + reset_cpu()

    @@
    identifier argname;
    type argtype;
    @@
    - reset_cpu(argtype argname)
    + reset_cpu(void)
    { ... }

Signed-off-by: Harald Seiler <hws@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-03-02 14:03:02 -05:00
Marek Vasut
7034478a2f ARM: imx: Include u-boot.img in u-boot-with-spl.imx if OF_SEPARATE=y
The u-boot-with-spl.imx is a concatenation of SPL and u-boot.uim.
The u-boot.uim is u-boot.bin wrapped in uImage. In case OF_SEPARATE
is enabled, the u-boot.bin does not contain control DT for U-Boot,
and so u-boot.uim does not contain the DT, and so u-boot-with-spl.imx
does not contain the DT, and a system where u-boot-with-spl.imx is
written to offset 1024B to the start of storage no longer boots, as
it is missing DT.

In case OF_SEPARATE is enabled, u-boot.img contains both u-boot.bin
and the necessary DTs. Therefore, use u-boot.img instead of u-boot.uim
to generate u-boot-with-spl.imx when OF_SEPARATE is enabled.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Christoph Niedermaier <cniedermaier@dh-electronics.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Ye Li <ye.li@nxp.com>
Cc: uboot-imx <uboot-imx@nxp.com>
2021-03-01 16:51:11 +01:00
Marek Vasut
076dc92ac6 ARM: imx: Do not hard-code MX8M MMU table DRAM entry offset
Instead of hard-coding the offset of DRAM entries in MMU table all over
the code, auto-detect the offset. This removes error-prone code which
would break e.g. in case the MMU table is modified.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Ye Li <ye.li@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-03-01 10:21:36 +01:00
Sean Anderson
1ce6e10c61 ARM: mx6: Add function to set serial#
The serial number OTP is similar to the imx7 version, except that the
register names are different. This also sets serial# directly, instead of
providing board_get_serial.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2021-03-01 10:21:36 +01:00
Tom Rini
93ef93b60b arm: Remove sksimx6 board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2021-02-25 11:59:53 -05:00
Tom Rini
53ad2db946 arm: Remove mx53smd board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-02-25 11:59:06 -05:00
Tom Rini
1c4bd238b5 arm: Remove mx53ard board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-02-25 11:59:05 -05:00
Tom Rini
2610bf14b5 arm: Remove mx25pdk board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-02-25 11:59:05 -05:00
Igor Opaniuk
2147a16983 dm: i2c: use CONFIG_IS_ENABLED macro for DM_I2C/DM_I2C_GPIO
Use CONFIG_IS_ENABLED() macro, which provides more convenient
way to check $(SPL)DM_I2C/$(SPL)DM_I2C_GPIO configs
for both SPL and U-Boot proper.

CONFIG_IS_ENABLED(DM_I2C) expands to:
- 1 if CONFIG_SPL_BUILD is undefined and CONFIG_DM_I2C is set to 'y',
- 1 if CONFIG_SPL_BUILD is defined and CONFIG_SPL_DM_I2C is set to 'y',
- 0 otherwise.

All occurences were replaced automatically using these bash cmds:
$ find . -type f -exec sed -i
     's/ifndef CONFIG_DM_I2C/if !CONFIG_IS_ENABLED(DM_I2C)/g' {} +
$ find . -type f -exec sed -i
    's/ifdef CONFIG_DM_I2C/if CONFIG_IS_ENABLED(DM_I2C)/g' {} +
$ find . -type f -exec sed -i
    's/defined(CONFIG_DM_I2C)/CONFIG_IS_ENABLED(DM_I2C)/g' {} +
$ find . -type f -exec sed -i
    's/ifndef CONFIG_DM_I2C_GPIO/if !CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} +
$ find . -type f -exec sed -i
    's/ifdef CONFIG_DM_I2C_GPIO/if CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} +
$ find . -type f -exec sed -i
    's/defined(CONFIG_DM_I2C_GPIO)/CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} +

Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-21 06:08:00 +01:00
Alexandru Gagniuc
efc4ad0bc7 spl: fit: Drop 'length' argument to board_spl_fit_post_load()
The size is derived from the FIT image itself. Any alignment
requirements are machine-specific and known by the board code. Thus
the total length can be derived from the FIT image and knowledge of
the platform. The 'length' argument is redundant. Remove it.

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
CC: Matt Porter <mporter@konsulko.com>
2021-02-17 17:12:45 -05:00
Tom Rini
2ae80437fb Merge branch '2021-02-02-drop-asm_global_data-when-unused'
- Merge the patch to take <asm/global_data.h> out of <common.h>
2021-02-15 10:16:45 -05:00
Tom Rini
8444860ca0 arm: Remove apx4devkit board
This board has not been converted to CONFIG_DM_MMC by the deadline of
v2019.04, which is almost two years ago.  In addition there are other DM
migrations it is also missing.  Remove it.

Cc: Lauri Hintsala <lauri.hintsala@bluegiga.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Lauri Hintsala <lauri.hintsala@silabs.com<mailto:lauri.hintsala@silabs.com>>
Signed-off-by: Tom Rini <trini@konsulko.com<mailto:trini@konsulko.com>>
2021-02-15 10:11:37 -05:00
Simon Glass
401d1c4f5d common: Drop asm/global_data.h from common header
Move this out of the common header and include it only where needed.  In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly.   Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-02 15:33:42 -05:00
Marek Vasut
4f37aa9579 ARM: imx: add i.MX8MN lpddr4 image cfg file
Add cfg file for i.MX8MN LPDDR4

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2021-01-23 14:01:59 +01:00
Adam Ford
8e95883e46 imx: Add support for i.MX8MN Beacon EmbeddedWorks devkit.
Beacon EmbeddedWorks is releasing a devkit based on the i.MX8M
Nano SoC consisting of baseboard + SOM.

The kit is based on the same design as the Beacon dev kit with
the i.MX8M Mini.

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2021-01-23 14:01:49 +01:00
Teresa Remmet
c661c511e9 board: phytec: imx8mp: Add PHYTEC phyCORE-i.MX8MP support
Add initial support PHYTEC phyCORE-i.MX8MP SOM.

    Supported features:
     - 2GB LPDDR4 RAM
     - eMMC
     - external SD
     - debug UART2
     - watchdog

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Reviewed-by: Heiko Schocher <hs@denx.de>
2021-01-23 11:30:32 +01:00
Ye Li
8cd2017981 imx: timer: Modify GPT timer driver for mx7
Modify the GPT common platform driver for mx7 which only use 24Mhz
OSC as clock source.

Note: at default, the mx7d will use system counter as timer. The GPT
is disabled.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-01-23 11:30:31 +01:00
Peng Fan
d4e84f24a6 imx8m: add QSPI boot dev
When boot type could not be detected from rom sw info,
read sbmr1 to detect, here we only use it to detect FLEXSPI
boot, because ROM not update it in rom sw info.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-01-23 11:30:31 +01:00
Ye Li
acc403cb2c imx6: Remove AHCI device before boot OS
Since we remove SATA device before boot OS, when AHCI is enabled, update
the codes to remove AHCI device.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-01-23 11:30:31 +01:00
Ye Li
79e0217a8e imx: Fix market segment fuse offset on iMX8MP
iMX8MP has shifted market segment fuse one bit from 0x440 [7:6] to [6:5],
correct it in imx common codes.

Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-01-23 11:30:31 +01:00
Han Xu
42a49754e2 nandbcb: nand support for i.MX8MP
Add NAND boot support for i.MX8MP by adding i.MX8MP in nandbcb support
list, reading boot_search_count from fuse.

i.MX8MN NAND boot is same as i.MX8MP, fix some issues as well.

Signed-off-by: Han Xu <han.xu@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-01-23 11:30:31 +01:00
Ye Li
233b0b070e imx: nandbcb: Fix potential overflow in nandbcb_set_boot_config
Fix Coverity Issue 9006656. In nandbcb_set_boot_config, an integer overflow
occurs, with the result converted to a wider integer type.

Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-01-23 11:30:31 +01:00
Ye Li
983f5e0391 imx: nandbcb: Fix potential overflow in fill_dbbt_data
Fix Coverity Issue 9006658. In fill_dbbt_data, an integer overflow occurs,
with the result converted to a wider integer type

Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-01-23 11:30:31 +01:00
Ye Li
f637c40dd7 imx: nandbcb: Fix resource leak in read_fcb
Fix Coverity Issue 9006657. In read_fcb, leak of memory to system
resource "fcb_raw_page". Adjust the sequence to check the mtd bad
block prior than allocation of "fcb_raw_page", also check the NULL
return of allocation.

Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-01-23 11:30:31 +01:00
Ye Li
fc11dc112d imx: nandbcb: Fix resource leak
Fix Coverity Issue 9006655. In write_fcb, leak of memory to resource
"fcb_raw_page". Since we have initialized the "ret" to 0, should return
the value of ret.

Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-01-23 11:30:31 +01:00
Ye Li
9dd599a7a4 nandbcb: Fix uninitialized variable
Fix Coverity Issue 9006654. In write_fcb, use of an uninitialized
variable "ret".

Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-01-23 11:30:31 +01:00
Peng Fan
4557f43a10 imx8m: lowlevel_init: tune alignment
The minimum alignment is 16 bytes, so use align 4 is enough.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-01-23 11:30:31 +01:00
Peng Fan
846b77e7df imx: imx8mn_ddr4_evk: Use CONFIG_TARGET_IMX8MN_DDR4_EVK for DDR4 EVK board
use CONFIG_TARGET_IMX8MN_DDR4_EVK for DDR4 EVK board, we will use
CONFIG_TARGET_IMX8MN_EVK for LPDDR4 EVK board.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-01-23 11:30:30 +01:00
Tom Rini
b11f634b1c Driver model: make some udevice fields private
Driver model: Rename U_BOOT_DEVICE et al.
 dtoc: Tidy up and add more tests
 ns16550 code clean-up
 x86 and sandbox minor fixes for of-platdata
 dtoc prepration for adding build-time instantiation
 -----BEGIN PGP SIGNATURE-----
 
 iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAl/09LURHHNqZ0BjaHJv
 bWl1bS5vcmcACgkQfxc6PpAIrebjwwf/fHRjYsAY/Yj/+y1xgo3L3sphIvQUqTDF
 KkLl+kHdV5r8W/HJULxLQcF2r7pcPEI6TAQxuj3qQ5SUvm2HviS8GHGPawDEwyht
 HgBp9VD56+HUadMfnbG//DVS73ycbL4XSKlYqpkINEejtnlttsCIawUXX5cTyGM/
 59VkgnKrKvJQRUXvYLa8MTugTs4fkPJGDqhActBk/7SP1SImj+rfalNSqA2/dx6y
 2RnPCSzB1x2231KSj+B1NgGlR3Xb8P8zgh20ijcEU/hrlXBTZyi7K7f4SJR30Efu
 LYkkuj4VbxcV/25RozR0fmknqCs0QyAI+/dql6TNtbTSPC/jAfj0jQ==
 =9kN3
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-5jan21' of git://git.denx.de/u-boot-dm into next

Driver model: make some udevice fields private
Driver model: Rename U_BOOT_DEVICE et al.
dtoc: Tidy up and add more tests
ns16550 code clean-up
x86 and sandbox minor fixes for of-platdata
dtoc prepration for adding build-time instantiation
2021-01-05 22:34:43 -05:00
Tom Rini
720620e691 Prepare v2021.01-rc5
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAl/0YVIACgkQFHw5/5Y0
 tywtEwv/cJWlKgcSnYjuJrxwuJdauUTfXdbUgtCxOtBw/BP4dsKkbGTJPw5q5M+4
 LJJSKyksmJVTX26h1dpkzQjOpWtTDnWqm5CTIxD52oQD7pxK+zCQ9T6S+QbQD0Se
 ogHmZluzFoluxbNgo8tiO52xvMhDO3TVAzxsNDdGfkd5/tAXOHClPc34RmAkdRHU
 VsR89AKdT2q543fiUfrRZYDzdctaNWhRGXMDcJ4+QU/8hQhrpcr8EtHbF+3mWX4K
 pA01pDz150Rn4UI6S2xKEWrjSTHe55fxVj/Qj0rq9z2E/+NqGXemf5s13AR0G/z3
 PqHdVLHzDe64pbOvmyU1pVQ0aMb8vMJUnqx68SQZY3On2c+MjRWQ+7aVVaKOcPGp
 uatk6QMrggHp3Li+3yZrLBE0qPr/sNMVb7mUesdZb6lFd2VIs8siwhfeGXMS+nDI
 xePzsR43Fnn5Q5KIqqvcWUb+TTTqUDUff0wyAU8NBgCaIBIZK8h2ppS1jjnbms0I
 mr8Er2vb
 =Dfum
 -----END PGP SIGNATURE-----

Merge tag 'v2021.01-rc5' into next

Prepare v2021.01-rc5

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-01-05 16:20:26 -05:00
Simon Glass
20e442ab2d dm: Rename U_BOOT_DEVICE() to U_BOOT_DRVINFO()
The current macro is a misnomer since it does not declare a device
directly. Instead, it declares driver_info record which U-Boot uses at
runtime to create a device.

The distinction seems somewhat minor most of the time, but is becomes
quite confusing when we actually want to declare a device, with
of-platdata. We are left trying to distinguish between a device which
isn't actually device, and a device that is (perhaps an 'instance'?)

It seems better to rename this macro to describe what it actually is. The
macros is not widely used, since boards should use devicetree to declare
devices.

Rename it to U_BOOT_DRVINFO(), which indicates clearly that this is
declaring a new driver_info record, not a device.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-01-05 12:26:35 -07:00
Heinrich Schuchardt
e6abe163bf imx: mx7: clock: use correct format strings
Use %u and not %d for unsigned values.
Print kHz and not khz.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-12-26 14:56:09 +01:00
Clément Péron
7d6a36a48d imx: ahab: allow to bypass confirmation for ahab_close cmd
Calling ahab_close cmd force the user to interact for confirmation.

This is not user-friendly when using this cmd during factory process.

Allow the user to pass '-y' option to bypass this confirmation.

Signed-off-by: Clément Péron <peron.clem@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Oliver Graute <oliver.graute@kococonnector.com>
2020-12-26 14:56:09 +01:00
Simon Glass
caa4daa2ae dm: treewide: Rename 'platdata' variables to just 'plat'
We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13 16:51:08 -07:00
Marcel Ziswiler
2f36a693e3 imx8: allow overriding memory layout
Introduce weak function board_mem_get_layout() which allows overriding
the memory layout from board code in runtime, useful for handling
different SKU versions.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-12-06 15:31:37 +01:00
Igor Opaniuk
a51fdba3fa board: toradex: add apalis-imx8x 2gb wb it v1.1a module support
This commit adds initial support for the Toradex Apalis iMX8X 2GB WB
IT V1.1A System on Module support [1].

Boot log:
U-Boot 2020.10-02940-g894aebb7e8-dirty (Oct 22 2020 - 09:43:57 +0300)
CPU:   NXP i.MX8QXP RevB A35 at 1200 MHz at 30C
DRAM:  2 GiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
Loading Environment from MMC... OK
In:    serial@5a070000
Out:   serial@5a070000
Err:   serial@5a070000
Model: Toradex Apalis iMX8 QuadXPlus 2GB Wi-Fi / BT IT V1.1A,
Serial# 06617018
Net:   eth0: ethernet@5b040000 [PRIME]
Hit any key to stop autoboot:  0

Functionality wise the following is known to be working:
  - eMMC and MMC/SD card
  - Ethernet (*)
  - GPIOs
  - I2C

Unfortunately, there is no USB functionality for the i.MX 8QXP as of
yet.

* With the SCU FW from the latest Toradex BSP 5.0.0 (SCU FW 1.5.1)
ETH PHY encounters bring up problems after reset, this will be fixed
soon on SCU FW side.

[1] https://www.toradex.com/computer-on-modules/apalis-arm-family/nxp-imx-8x
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Acked-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-12-06 15:31:37 +01:00
Tim Harvey
bc479b2118 imx8m: fix cache setup for dynamic sdram size
the mem_map structure containing the size of SDRAM is used in various
cache functions in cache_v8.c thus we need to update it with the
sdram size the board is configured with as well. Without this
the cache functions do not get setup properly and can hang
in the case where a board reports more SDRAM than defined in
PHYS_SDRAM_SIZE.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2020-12-06 15:31:37 +01:00
Oliver Graute
b15cd88b22 imx: ahab: fix implicit declaration warning
Fix the following warning:

arch/arm/mach-imx/imx8/ahab.c:105:3: warning: implicit declaration of function ‘flush_dcache_range’ [-Wimplicit-function-declaration]
   flush_dcache_range(s, e);
   ^~~~~~~~~~~~~~~~~~

Include cpu_func.h header which declares the flush_dcache_range()
function.

Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: uboot-imx <uboot-imx@nxp.com>
2020-12-06 15:31:36 +01:00
Oliver Graute
492b728f9f imx: ahab: fix compiler warnings in debug
arch/arm/mach-imx/imx8/ahab.c: In function ‘authenticate_os_container’:
arch/arm/mach-imx/imx8/ahab.c:96:9: warning: format ‘%x’ expects argument of type
‘unsigned int’, but argument 9 has type ‘ulong {aka long unsigned int}’ [-Wformat=]
   debug("img %d, dst 0x%x, src 0x%x, size 0x%x\n",

Fix those by using "%lu" specified.

Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: uboot-imx <uboot-imx@nxp.com>
2020-12-06 15:31:36 +01:00
Oliver Graute
f4433e7f27 imx: ahab: Fix compiler warnings in printf
arch/arm/mach-imx/imx8/ahab.c:110:63: warning: format ‘%x’ expects
argument of type ‘unsigned int’, but argument 2 has type ‘u64 {aka long
long unsigned int}’ [-Wformat=]

Fix those by using %llx

Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: uboot-imx <uboot-imx@nxp.com>
2020-12-06 15:31:36 +01:00
Heiko Schocher
015c026f7a imx6: add support for aristainetos2c_cslb board variant
add support for aristainetos2c_cslb board variant.

Signed-off-by: Heiko Schocher <hs@denx.de>
2020-12-06 15:07:06 +01:00
Heiko Schocher
3cf02f5ffa imx6: remove not longer supported aristainetos boards
Removed aristainetos2, 2b, 2b-csl. This boards have been
recalled and destroyed.

Adapt board code to remove stuff not needed anymore.

Fix checkpatch warning, remove fdt_high and initrd_high
from default environment.

Signed-off-by: Heiko Schocher <hs@denx.de>
zu remove
2020-12-06 15:06:16 +01:00
Sebastian Reichel
64272efdaf board: ge: b1x5v2: Add GE B1x5v2 and B1x5Pv2
GE B1x5v2 patient monitor series is similar to the CARESCAPE Monitor
series (GE Bx50). It consists of a carrier PCB used in combination
with a Congatec QMX6 SoM. This adds U-Boot support using device model
everywhere and SPL for memory initialization.

Proper configuration is provided as 'ge_b1x5v2_defconfig' and the
combined image u-boot-with-spi.imx can be flashed directly to 1024
byte offset to /dev/mtdblock0. Alternatively SPL and u-boot.imx can
be loaded separately via USB-OTG using e.g. imx_usb.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2020-11-01 16:01:40 +01:00
Sebastian Reichel
436ba4e0c7 imx6: allow usage of disable_ldb_di_clock_sources for CONFIG_MX6QDL
Allow using disable_ldb_di_clock_sources with just the combined
CONFIG_MX6QDL being enabled.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-11-01 15:58:47 +01:00
Teresa Remmet
0cc2a07879 board: phytec: imx8mm: Add PHYTEC phyCORE-i.MX8MM support
Add support PHYTEC phyCORE-i.MX8MM SOM.

Supported features:
 - 2GB LPDDR4 RAM
 - 1x 1Gbit Ethernet
 - eMMC
 - external SD
 - debug UART3
 - watchdog
 - i2c eeprom

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
2020-11-01 15:58:19 +01:00
Marek Vasut
08945cceff ARM: imx: Add support for the primary/secondary bmode to MX53
Implement the 'getprisec' subcommand of 'bmode' command for i.MX53 and
also the primary/secondary bootmode switching.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP i.MX U-Boot Team <uboot-imx@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2020-11-01 15:57:48 +01:00
Fabio Estevam
fc4e69f63f mx7ulp: clock: Align the PLL_USB frequency
The command 'clocks' shows the following output:

=> clocks
PLL_A7_SPLL         528 MHz
PLL_A7_APLL         529 MHz
PLL_USB           0 MHz

Add some extra spaces so that the PLL_USB information gets aligned with
the previous reported frequencies.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
2020-11-01 15:53:29 +01:00
Fabio Estevam
538723e012 mx7ulp: clock: Remove unuseful information
The command 'clocks' shows the following output:

=> clocks
PLL_A7_SPLL         528 MHz
PLL_A7_APLL         529 MHz
PLL_USB           0 MHz

....

[do_mx7_showclocks] addr = 0x9FFB61F1

The last line is not useful at all, so just remove it.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
2020-11-01 15:53:17 +01:00
Tim Harvey
9d41628863 imx: cpu: terminate line with CR if invalid temp sensor
Ensure we terminate the line with a CR if we get an invalid sensor device
or reading.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-11-01 15:52:58 +01:00
Jorge Ramirez-Ortiz
74a039403c mx6: peripheral clock from oscillator
In order to be able to run the I2C bus at 400Khz, the chip errata[1]
recommends that the peripheral clock runs out of the 24MHz oscillator.

Systems running I2C from OP-TEE before Linux executes - for example to
access a Secure Element [2] providing the cryptographic support - expect
this clock to be configured by the bootloader [3].

[1] IMX6SLCE Rev. 5, 02/2019, ERR007805.
[2] OP-TEE: support for NXP SE05X Plug and Trust (patch on the list).
[3] OP-TEE: check the imx_i2c.c driver (imx6 patch on the list).

Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-11-01 15:52:47 +01:00
Simon Glass
4e28a259fd imx: mx6cuboxi: Disable thermal driver in SPL
This feature is incompatble with of-platdata since it uses the
U_BOOT_DEVICE() macro. With of-platdata the only devices permitted are
those created by dtoc.

The driver is not used in SPL anyway, so exclude it from that build.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-10-29 14:42:56 -06:00
Marek Vasut
d1a7205532 ARM: mx6: ddr: Add support for iMX6UL/ULL/SL/SDL
This patch adds support for iMX6UL/ULL/SL/SDL MMDC into the DDR calibration
code. The difference between MX6DQ and MX6UL/ULL/SL is that the later SoCs
have 2 SDQS registers, just like MX6SX, while the MX6DQ/MX6SDL has 8.

Fixes: 4f4c128c65 ("ARM: mx6: ddr: Add support for iMX6SX")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Eric Nelson <eric@nelint.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-09-17 14:40:55 +02:00
Peng Fan
0098222dac imx8mp: Remove parts MIMX8ML7 and MIMX8ML5 support
Latest datasheet revE has removed MIMX8ML7D/5D/7C/5C parts, so
update u-boot to remove decoding and support for those parts.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-09-17 14:40:22 +02:00
Peng Fan
a3e7d51fd5 imx8m: clock_imx8mm: add missed return
Add missed return

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-09-17 14:40:17 +02:00
Peng Fan
27c803848b spl: add g_dnl_get_board_bcd_device_number
Add g_dnl_get_board_bcd_device_number, the new BCD value is used by uuu to distinguish
if the SPL supports the SDPV.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-09-01 14:47:43 +02:00
Tom Rini
f27ffe4177 arm: mx6: Make all i.MX6 SoCs user-selectable
We have a number of platforms that are a combination of a carrier board
and System-on-Module (SoM) that in turn allows for the board to have
different SoCs on it.  In some cases, this is handled via board-specific
Kconfig options.  In other cases we make use of
CONFIG_SYS_EXTRA_OPTIONS.  This latter case however can lead to invalid
configurations as we will not in turn get options that in Kconfig are
selected by or depend on that setting.

To resolve this, make the SoC option a choice in Kconfig and make boards
depend on what they can support.  This change opens us up for further
clean-ups in the cases where a single CONFIG_TARGET_xxx can support
different SoCs and today they do not, or do not cleanly do so.

Reported-by: Matt Porter <mporter@konsulko.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: "NXP i.MX U-Boot Team" <uboot-imx@nxp.com>
Cc: Soeren Moch <smoch@web.de>
Cc: Markus Niebel <Markus.Niebel@tq-group.com>
Cc: Igor Opaniuk <igor.opaniuk@toradex.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Nikita Kiryanov <nikita@compulab.co.il>
Cc: Andreas Geisreiter <ageisreiter@dh-electronics.de>
Cc: Ludwig Zenz <lzenz@dh-electronics.de>
Cc: Lukasz Majewski <lukma@denx.de>
Cc: Akshay Bhat <akshaybhat@timesys.com>
Cc: Ken Lin <Ken.Lin@advantech.com.tw>
Cc: Ian Ray <ian.ray@ge.com>
Cc: Tim Harvey <tharvey@gateworks.com>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Raffaele RECALCATI <raffaele.recalcati@bticino.it>
Cc: Simone CIANNI <simone.cianni@bticino.it>
Cc: Adam Ford <aford173@gmail.com>
Cc: Marcin Niestroj <m.niestroj@grinn-global.com>
Cc: "Eric Bénard" <eric@eukrea.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Jason Liu <jason.hui.liu@nxp.com>
Cc: Ye Li <ye.li@nxp.com>
Cc: Eric Nelson <eric@nelint.com>
Cc: Troy Kisky <troy.kisky@boundarydevices.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Parthiban Nallathambi <parthiban@linumiz.com>
Cc: Marek Vasut <marex@denx.de>
Cc: "Sébastien Szymanski" <sebastien.szymanski@armadeus.com>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Niel Fourie <lusus@denx.de>
Cc: Martyn Welch <martyn.welch@collabora.com>
Cc: Richard Hu <richard.hu@technexion.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: Arkadiusz Karas <arkadiusz.karas@somlabs.com>
Cc: Breno Lima <breno.lima@nxp.com>
Cc: Francesco Montefoschi <francesco.montefoschi@udoo.org>
Cc: Silvio Fricke <open-source@softing.de>
Tested-by: Matt Porter <mporter@konsulko.com> [colibri_imx6]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Marcin Niestroj <m.niestroj@grinn-global.com>
2020-08-25 10:26:14 +02:00
Marek Vasut
af50d92ae7 ARM: imx: ddr: Add deskew register programming
Fill is code for programming the DDR_PHY_CMD_DESKEW_CONx registers,
which are optional, but can be used to fill in the byte lane delays.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP i.MX U-Boot Team <uboot-imx@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2020-08-17 17:55:49 +02:00
Marek Vasut
4b44bea701 ARM: imx: Add support for reading out the primary/secondary bmode to MX7
Implement the 'getprisec' subcommand of 'bmode' command for i.MX7 by
reading out the SRC GPR10 bit 30. This bit is either set by the BootROM
if it switched to the secondary copy due to primary copy being corrupted
OR it can be overridden by the user.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP i.MX U-Boot Team <uboot-imx@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2020-08-17 17:55:31 +02:00
Marek Vasut
3c0fbbfd95 ARM: imx: Add support for reading out the primary/secondary bmode
Add new 'getprisec' subcommand to 'bmode' command, which sets the return
value of the 'bmode' command to either 0 if the system booted from primary
copy or to 1 if the system booted from secondary copy. This can be used
e.g. in 'test' command to determine which copy of the system is running.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP i.MX U-Boot Team <uboot-imx@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2020-08-17 17:55:17 +02:00
Marek Vasut
5ec83561c4 ARM: imx: Add support for switching primary/secondary boot mode to bmode
The i.MX6/i.MX7 is capable of booting a secondary "redundant" system
image in case the primary one is corrupted. The user can force this
boot mode as well by explicitly setting SRC GPR10 bit 30. This can be
potentially useful when upgrading the bootloader itself. Expose this
functionality to the user.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP i.MX U-Boot Team <uboot-imx@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2020-08-17 17:54:01 +02:00
Marek Vasut
c72372d38c ARM: imx: Add bmode support for iMX7
Add the basic differentiation between i.MX6 and i.MX7 into the bmode
command, the mechanism really works almost the same on both platforms.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP i.MX U-Boot Team <uboot-imx@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2020-08-17 17:53:55 +02:00
Tom Rini
f1c0b7cd4b For 2020.10
-----------
 
 - fixes for Toradex board
 - fix warnings from previous PR
 - HAB: reset instead of panic after failure
 - new board:  MYiR Tech MYS-6ULX
 - mx6cuboxi: use OF_PLATDATA
 - further changes for DM
 
 Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/714513163
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCXykjtQ8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76a1WQCcD+objdS+90mDdT0yTpW3jHS4YiwAn2V2rTTo
 4hKj5yxRg3cvb/pBAmbQ
 =TyRs
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20200804' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

For 2020.10
-----------

- fixes for Toradex board
- fix warnings from previous PR
- HAB: reset instead of panic after failure
- new board:  MYiR Tech MYS-6ULX
- mx6cuboxi: use OF_PLATDATA
- further changes for DM

Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/714513163
2020-08-04 11:11:02 -04:00
Simon Glass
055efe5690 thermal: Drop dm.h header file
This header file should not be included in other header files. Remove it
and use a forward declaration instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-03 22:19:54 -04:00
Marek Vasut
1e7a69f661 ARM: imx: hab: panic on authentication failure
Instead of hang()ing the system and thus disallowing any automated
recovery possibility from a HAB authentication failure, panic() .
The panic() function can be configured to hang() the system after
printing an error message, however the default is to reset the
system instead.

This allows redundant boot to work correctly. In case the primary
or secondary image cannot be authenticated, the system reboots and
bootrom can try to start the other one.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP i.MX U-Boot Team <uboot-imx@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-08-03 17:03:57 +02:00
Parthiban Nallathambi
10e959a1ca imx: Add MYiR Tech MYS-6ULX support
MYS-6ULX is single board computer (SBC) comes with eMMC or NAND based
on imx6ULL SoC from NXP and provision for expansion board. This
commit adds support only for SBC with NAND.

CPU:   Freescale i.MX6ULL rev1.1 528 MHz (running at 396 MHz)
CPU:   Commercial temperature grade (0C to 95C) at 45C
Reset cause: WDOG
Model: MYiR i.MX6ULL MYS-6ULX Single Board Computer with NAND
Board: MYiR MYS-6ULX 6ULL Single Board Computer
DRAM:  256 MiB
NAND:  256 MiB
MMC:   FSL_SDHC: 0
In:    serial@2020000
Out:   serial@2020000
Err:   serial@2020000
Net:   FEC0

Working:
 - Eth0
 - MMC/SD
 - NAND
 - UART 1
 - USB host

Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
2020-08-03 17:03:57 +02:00
Fabio Estevam
68a699e1e8 imx8m: soc: Remove unneeded space
Checkpatch reports the following issue:

ERROR: space prohibited before that ',' (ctx:WxW)
#936: FILE: arch/arm/mach-imx/imx8m/soc.c:936:
+		      0, 0 , 0, 0, 0, 0, &res);

Remove the unneeded space.
 		           ^
Reported-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-07-27 14:02:37 +02:00
Igor Opaniuk
fb99ac9caf imx: mx7: fix DDRC size in A7-M4 mapping table
According to i.MX 7Solo Applications Processor Reference Manual,
2.1.3 Cortex-M4 Memory Map, M4 can address only 1536MB of DDRC
(Start Address: 0x8000_0000; End Address: 0xDFFF_FFFF).
Correct DDRC size to 0x60000000.

Fixes: c0f037f6("mach-imx: bootaux: elf firmware support")
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-07-27 14:00:36 +02:00
Masahiro Yamada
b75d8dc564 treewide: convert bd_t to struct bd_info by coccinelle
The Linux coding style guide (Documentation/process/coding-style.rst)
clearly says:

  It's a **mistake** to use typedef for structures and pointers.

Besides, using typedef for structures is annoying when you try to make
headers self-contained.

Let's say you have the following function declaration in a header:

  void foo(bd_t *bd);

This is not self-contained since bd_t is not defined.

To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h>

  #include <asm/u-boot.h>
  void foo(bd_t *bd);

Then, the include direcective pulls in more bloat needlessly.

If you use 'struct bd_info' instead, it is enough to put a forward
declaration as follows:

  struct bd_info;
  void foo(struct bd_info *bd);

Right, typedef'ing bd_t is a mistake.

I used coccinelle to generate this commit.

The semantic patch that makes this change is as follows:

  <smpl>
  @@
  typedef bd_t;
  @@
  -bd_t
  +struct bd_info
  </smpl>

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-07-17 09:30:13 -04:00
Heinrich Schuchardt
90865614b4 ARM: mx6: make CAAM usable on the i.MX6 boards
Even if the HAB fuse is not set we want to be able to use the Cryptographic
Accelerator and Assurance Module (CAAM) for generating random numbers. So
SYS_FSL_HAS_SEC should be selected even if IMX_HAB is not set.

arch_misc_init() has to be called to initialize the CAAM.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-16 11:20:08 +02:00
Niel Fourie
26a6ed1b2e arm: imx6q: pcm058: Convert pcm058 to use DM with DTs
Convert pcm058 support to use device trees and the driver model.
Add rudimentary boot scripts to the environment, expand README.

Signed-off-by: Niel Fourie <lusus@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2020-07-14 11:46:04 +02:00
Peng Fan
eb3967388e imx8m: implement armv8_el2_to_aarch32
Add iMX8M specific armv8_el2_to_aarch32 to let AArch64 mode U-Boot
could boot aarch32 mode linux with FIT image as below:

/dts-v1/;

/ {
        description = "Configuration to load ARM32 Linux";

        images {
                kernel@1 {
                        description = "ARM32 Linux kernel";
                        data = /incbin/("./Image");
                        type = "kernel";
                        arch = "arm";
                        os = "linux";
                        compression = "none";
                        load = <0x40008000>;
                        entry = <0x40008000>;
                        hash@1 {
                                algo = "md5";
                        };
                };
                fdt@1 {
                        description = "Flattened Device Tree blob";
                        data = /incbin/("./imx8mm-evk.dtb");
                        type = "flat_dt";
                        arch = "arm";
                        compression = "none";
                        load = <0x43000000>;
                        hash@1 {
                                algo = "md5";
                        };
                };
        };
        configurations {
                default = "config@1";

                config@1 {
                        description = "fsl-imx8mm-evk";
                        kernel = "kernel@1";
                        fdt = "fdt@1";
                };
        };
};

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-14 15:23:48 +08:00
Peng Fan
3c41728d80 imx8m: Refactor the OPTEE memory removal
Current codes assume the OPTEE address is at the end of first DRAM bank.
Adjust the process to allow OPTEE in the middle of first bank.

When OPTEE memory is removed from first bank, it may split the first bank
to two banks, adjust the MMU table for the split case,
Since the default CONFIG_NR_DRAM_BANKS is 4, it is enough, just enlarge
i.MX8MP evk to default to avoid issue.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Silvano di Ninno <silvano.dininno@nxp.com>
Tested-by: Silvano di Ninno <silvano.dininno@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-14 15:23:48 +08:00
Peng Fan
6036dba1c8 imx8m: disable nodes before kernel/mfgtool boot for fused part
To fused part, we need to disable nodes of dtb to let kernel boot.

To mfgtool, USB issue when using super-speed for mfgtool, temporally
work around the problem to use high-speed only.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-14 15:23:47 +08:00
Ye Li
2707faf01f imx8mn/imx8mp: override env_get_offset and env_get_location
To use one defconfig for all boot device, we have to runtime set
env offset and return env medium according to the boot device.
This patch overrides the env_get_offset and env_get_location to
implement the feature.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-14 15:23:47 +08:00
Peng Fan
7a42bf0489 imx8m: power down fused cores
For non-Quad SoCs, the fused cpu cores could be powered down in SPL
to save power.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-14 15:23:47 +08:00
Ye Li
d1eee7eed9 imx8mp: Add fused parts support
iMX8MP has 6 fused parts in each qualification tier, with core, VPU,
ISP, NPU or DSP fused respectively.

The configuration tables for enabled modules:
MIMX8ML8DVNLZAA          Quad Core, VPU, NPU, ISP, DSP
MIMX8ML7DVNLZAA          Quad Core, NPU, ISP
MIMX8ML6DVNLZAA          Quad Core, VPU, ISP
MIMX8ML5DVNLZAA          Quad Core, VPU
MIMX8ML4DVNLZAA          Quad Lite
MIMX8ML3DVNLZAA          Dual Core, VPU, NPU, ISP, DSP

Add the support in U-Boot

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-14 15:23:47 +08:00
Peng Fan
2f3c92060d imx8m: workaround ROM serror
ROM SError happens on two cases:

1. ERR050342, on iMX8MQ HDCP enabled parts ROM writes to GPV1 register, but
when ROM patch lock is fused, this write will cause SError.

2. ERR050350, on iMX8MQ/MM/MN, when the field return fuse is burned, HAB
is field return mode, but the last 4K of ROM is still protected and cause
SError.

Since ROM mask SError until ATF unmask it, so then ATF always meets the
exception. This patch works around the issue in SPL by enabling SPL
Exception vectors table and the SError exception, take the exception
to eret immediately to clear the SError.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-14 15:23:47 +08:00
Peng Fan
3c9221ad27 imx8m: add eqos clk
Add imx_eqos_txclk_set_rate/imx_get_eqos_csr_clk to override the
weak function in driver

Add set_clk_eqos to configure eQoS clk

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-14 15:23:47 +08:00
Peng Fan
3c1c28d4e0 imx8m: add sdhc/nand/ecspi clk api
Current DM CLK is a bit complicated, for simplity, let DM clk only
support enable/disable/get_rate. For the expected rate settings,
we use non-DM clk to do that. Then we could have simple DM clk for
i.MX and could also share between SPL/U-Boot proper.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-14 15:23:47 +08:00
Peng Fan
14254e646d imx8m: configure NoC clk
Configure NoC clk for better system performance

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-14 15:23:47 +08:00
Peng Fan
46a8a28bf6 imx8m: configure arm clk sources from PLL
A53 CCM root max support 1GHz, to support high freq, we need
to switch ARM clk sources from ARM PLL directly.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-14 15:23:47 +08:00
Peng Fan
d6498bc459 imx: remove imx sip file
We have switch to use arm_smccc_smc, no need to keep i.MX specific
sip wrapper.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-14 15:23:47 +08:00
Peng Fan
bf26b9421e imx: bootaux: use arm_smccc_smc
Use arm_smccc_smc to replace call_imx_sip

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-14 15:23:46 +08:00
Peng Fan
a2f143eaac imx8m: soc: use arm_smccc_smc
Use arm_smccc_smc to replace call_imx_sip

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-14 15:23:46 +08:00
Peng Fan
dc575201c8 imx8: misc: use arm_smccc_smc
Use arm_smccc_smc to replace call_imx_sip

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-14 15:23:46 +08:00
Jagan Teki
f247354708 arm: Remove mx31pdk board
DM, OF_CONTROL, DM_SPI and other driver model migration
deadlines are expired for this board.

Remove it.

Acked-by: Magnus Lilja <lilja.magnus@gmail.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-07-09 20:58:06 +05:30
Tom Rini
7d80a9cd92 arm: imx: Finish migration of CONFIG_CSF_SIZE to Kconfig
While in most cases CSF_SIZE is handled via Kconfig we have some i.MX8M
platforms that set the size based on the now-renamed CONFIG_SECURE_BOOT
symbol.  Update things so that CSF_SIZE itself depends on IMX_HAB being
enabled and provide the default value for i.MX8M family of parts.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Ye Li <ye.li@nxp.com>
Cc: NXP i.MX U-Boot Team <uboot-imx@nxp.com>
Fixes: d714a75fd4 ("imx: replace CONFIG_SECURE_BOOT with CONFIG_IMX_HAB")
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Reviewed-by: Ye Li <ye.li@nxp.com>
2020-06-26 10:29:06 -04:00
Tom Rini
0567099bea arm: imx: Finish migration from CONFIG_SECURE_BOOT to CONFIG_IMX_HAB
There are a few remaining places where we say CONFIG_SECURE_BOOT rather
than CONFIG_IMX HAB.  Update these instances.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP i.MX U-Boot Team <uboot-imx@nxp.com>
Cc: Eddy Petrișor <eddy.petrisor@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Priyanka Jain <priyanka.jain@nxp.com>
Fixes: d714a75fd4 ("imx: replace CONFIG_SECURE_BOOT with CONFIG_IMX_HAB")
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2020-06-26 10:29:06 -04:00
Marek Vasut
a1f6d04aa1 ARM: imx: soc: Select default TEXT_BASE for MX7
Select default U-Boot and SPL text base for the MX7 SoC. The U-Boot
text base is picked as the one used by various MX7 boards. The SPL
text base however is different.

The SPL text base is set to 0x912000 instead of the usual 0x911000,
that is because the 0x911000 value cannot work. Using 0x911000 as a
SPL text base will result in the DCD header being placed below the
0x911000 address, which is a reserved SRAM area which must not be
used. This will actually trigger eMMC boot failure on MX7D at least.
Hence the increment.

Update all boards affected by this SPL problem to the new SPL_TEXT_BASE.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP i.MX U-Boot Team <uboot-imx@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2020-06-22 17:44:20 +02:00
Marek Vasut
cb82ee25f7 ARM: imx: ddr: Fill in missing DDRC ZQCTLx on i.MX7
The iMX7 defines further DDRC ZQCTLx registers, however those were
thus far missing from the list of registers and not programmed. On
systems with LPDDR2 or DDR3, those registers must be programmed with
correct values, otherwise the DRAM may not work. However, existing
systems which worked without programming these registers before are
now setting those registers to 0, which is the default value, so no
functional change there.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP i.MX U-Boot Team <uboot-imx@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2020-06-22 17:44:06 +02:00
Stefano Babic
3854296801 Revert "imx: rom api: fix image offset computation"
This reverts commit 1f63ee6566.

As reported by Ye Li on ML:

1. Removing the image_offset will break secondary (redundant) boot support for sd and emmc.
2. When booting from emmc boot partition, the image_offset is 0. But the flash.bin
generated by mkimage with imximage-8mp-lpddr4.cfg is for sd. It expects to be burn at 32KB offset.
The fit offset 0x60000 has already included the 32KB offset.  So when you burn this flash.bin
to emmc boot partition at offset 0, the fit offset should subtract the 32KB (0x60000 - 0x8000).

Signed-off-by: Stefano Babic <sbabic@denx.de>
2020-06-09 11:19:55 +02:00
Marek Vasut
0e06d63d19 ARM: imx: ddr: Add missing PHY reset
The iMX7D RM 9.2.4.9.3 Power removal flow Table 9-11. Re-enabling power
explicitly says both the DDR controller and the PHY must be reset in the
correct sequence. Currently the code only resets the controller. This
leads to a misbehavior where the system brings the DRAM up after reboot,
but the DRAM is unstable. Add the missing reset.

The easiest way to trigger this is by triggering WDT without having the
WDT assert WDOG_B signal, i.e. mw.w 0x30280000 0x25 .

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP i.MX U-Boot Team <uboot-imx@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2020-06-08 10:42:54 +02:00
Sébastien Szymanski
1f63ee6566 imx: rom api: fix image offset computation
When not booting from FlexSPI, the offset computation is:

offset = image_offset + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512 - 0x8000;

When booting from SD card or eMMC user partition, image_offset is
0x8000. It is useless to add and remove 0x8000.
When booting from other device, image_offset is 0 so this computation is wrong.

Simplfy this computation to work on all booting devices.

Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2020-06-08 10:42:14 +02:00
Patrick Wildt
0e9c045b2b imx: move ATF to the back of the FIT to fix loading over yModem
With yModem the FIT Image is only supplied once, so we can only
seek forward in the yModem supplied image and never backwards.
With the recent changes to the SPL mechanism, including loading
U-Boot first, FDT after, then the loadables, we must also reorder
the FIT image script to make sure that the loadables are last in
the FIT image.

Signed-off-by: Patrick Wildt <patrick@blueri.se>
Tested-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2020-06-08 10:41:38 +02:00
Peng Fan
f3e1c536a9 imx: Kconfig: enable IMX_BOOTAUX for i.MX8M
i.MX8M could use imx bootaux to boot m4/m7 core, so let's add it
to the dependency list.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-06-08 10:39:24 +02:00
Simon Glass
cd93d625fd common: Drop linux/bitops.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:23 -04:00
Simon Glass
c05ed00afb common: Drop linux/delay.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:23 -04:00
Simon Glass
eb41d8a1be common: Drop linux/bug.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:23 -04:00
Simon Glass
25a5818ff8 common: Drop asm/ptrace.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:23 -04:00
Simon Glass
f7ae49fc4f common: Drop log.h from common header
Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:18 -04:00
Simon Glass
0914011310 command: Remove the cmd_tbl_t typedef
We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 18:36:55 -04:00
Simon Glass
691d719db7 common: Drop init.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 17:33:33 -04:00
Simon Glass
4d72caa5b9 common: Drop image.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 17:33:33 -04:00
Simon Glass
90526e9fba common: Drop net.h from common header
Move this header out of the common header. Network support is used in
quite a few places but it still does not warrant blanket inclusion.

Note that this net.h header itself has quite a lot in it. It could be
split into the driver-mode support, functions, structures, checksumming,
etc.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 17:33:31 -04:00
Simon Glass
c3dc39a2f8 arm: Don't include common.h in header files
It is bad practice to include common.h in other header files since it can
bring in any number of superfluous definitions. It implies that some C
files don't include it and thus may be missing CONFIG options that are set
up by that file. The C files should include these themselves.

Update some header files in arch/arm to drop this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 14:54:24 -04:00
Peng Fan
d52a03b130 imx8: cpu: check resource owned after sid fail
When we create software partition, we still need let parent
partition to configure sid, so move the check after sid failed.

Acked-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:21 +02:00
Peng Fan
ed5b253d0e imx: imx8qm/qxp: check whether m4 partition booted
Add code to check m4 partition booted or not, we will use this
to runtime set device tree file that passed to Linux Kernel.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Ye Li
42b26ddc80 imx8: Select boot device dynamically
For fspi build, we will enable both SPL NOR support and SPL SPI
support. SPL will dynamically check the resource owner then
select corresponding boot device.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Peng Fan
6aead23323 imx: imx8qm/qxp: Recover SPL data section for partition reboot
When doing partition reboot, the boot image won't be reloaded by ROM,
it is just CPU reset to boot entry. The SW has to keep the boot image
inside the RAM unchanged. It includes both the TEXT section and DATA
section.

For SPL, the problem is DATA section will be updated at runtime, so in
next partition reboot the data is not same as the initial value from
cold boot. If any code depends on the initial value, then it will have
problem.

This patch introduces a mechanism to recover the data section
for partition reboot. It adds a new section in image for saving
data section. When from cold boot, the data section will be saved
to that new section at SPL early phase. When from partition reboot,
the data section will be restored from the new section.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Peng Fan
8103767256 imx: imx8qm/qxp: add get_board_serial
Add get_board_serial support, the info could be got from fuse.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Ye Li
7c351ff5e0 imx: imx8qm/qxp: Fix issue in get_effective_memsize
When Trusty OS allocates the mem region from 0xfe0000000-0xffffffff,
the get_effective_memsize does not return correct memory size.
There is a check in get_effective_memsize to find the memreg where
the u-boot is running, and return the size of that memreg as the result
of get_effective_memsize. When using aligned start, the value is
0x80200000 since it is 2MB aligned. Thus the finding of memreg will
fail and return the PHYS_SDRAM_1_SIZE because u-boot text base is
0x80020000. This cause u-boot is relocated to the high memory where has
been occupied by Trusty OS.

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Peng Fan
f44afd546f imx: imx8qm/qxp: reserving DDR memory for M4
The DDR memory from 0x88000000 to 0x8FFFFFFF is assigned to M4 on
QM and QXP. The M4 can allocate this memory by two ways,
in SCD or u-boot.

In this patch, u-boot addes the memory reserve node to DTB to pass
the info to kernel, no matter the M4 memory is reserved in SCD
or u-boot. So kernel won't access M4 reserved memory.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Han Xu
f797fe84fc nandbcb: read boot search count from fuse for imx8qxp
add support for imx8qxp to read boot search count from fuse in nandbcb

Signed-off-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Han Xu
214b7d534d cmd: nandbcb: Reconstruct the nandbcb tool for all platforms
The original nandbcb tool was designed for imx6 only, when trying to
leverage it to replace the kobs-ng tool, we found the design is not
friendly for supporting all platforms. To support all iMX6/7/8 platforms
and for easy further maintain, I reconstruct the structure of the tool.

The main changes including:

1. Use platform_data to determine the logic branches rather than simply
   use SOC name.
2. More data structures as parameter for functions.
3. Global variables to define the FCB/DBBT/FW locations.
4. Implement the kobs-ng default 4 FCB/4 DBBT/2 FW layout.
5. Support Hamming coding/ 40bit BCH/ 62bit BCH coding FCB.
6. Dump and compare all written FCB/DBBT to verify data integrity.

The tool has been verified on iMX6Q/DL, 6SX, 7D, 6ULL, iMX8QX, iMX8MM.

Signed-off-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Alice Guo
49f8454705 nandbcb: add nandbcb dump command for i.MX6
Verify/dump boot structures.

Signed-off-by: Alice Guo <alice.guo@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Alice Guo
0b10337b21 nandbcb: add nandbcb dump command for i.MX8MM
Verify/dump boot structures written to NAND Flash chip.

Signed-off-by: Alice Guo <alice.guo@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Alice Guo
66dbd9c9ed nandbcb: support i.MX8M
Tested on i.MX8MM EVK, imx8mm evk uses BCH
encoding and randomizer
modify macro and print size_t with %zx
use CONFIG_IMX8M because it should apply to imx8mq/mm/mn

Signed-off-by: Alice Guo <alice.guo@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Han Xu
c6ed3508bd nandbcb: fix the issue cannot support gf_14 NAND boot
bchtype in FCB should be associated to the gf_13/14 settings in BCH, fix
the issue and test on Micron 29F64G08CBABB, it can boot after the
change.

Signed-off-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Leonard Crestez
6fcb2ee783 imx8: Replace SC_R_LAST with SC_R_NONE in DTB
We are currently using SC_R_LAST as a marker for imx8 power domain tree
nodes without a resource attached. This value is compiled into dtb as
part of the linux build and used by uboot.

The SC_R_LAST constant changes frequently as SCFW resources are added
(by design) and every time we need to update linux and uboot headers
together or boot can fail.

Fix this by replacing SC_R_LAST usage with a new constant SC_R_NONE
defined to be 0xFFF0.

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Adam Ford
f36f8bc627 imx: Add support for i.MX8MM Beacon EmbeddedWorks devkit.
Beacon EmbeddedWorks, formerly known as Logic PD, is releasing
a devkit based on the i.MX8M Mini SoC consisting of baseboard +
SOM.

It supports eMMC on the SOM, microSD on the baseboard, various
GPIO, the PINCTRL, and UART.

Signed-off-by: Adam Ford <aford173@gmail.com>
2020-05-10 20:55:20 +02:00
Peng Fan
dc597d1d40 imx: cpu: support tmu
Support tmu when print cpu info

Signed-off-by: peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Ye Li
3462b55d17 imx8mp: Set default SNSR25C for TMU probe1
So far u-boot only load SNSR25C for TMU main probe (probe 0). However,
kernel enables two probes. So it also needs to set default SNSR25C of
TCALIV1 for blank samples.

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Ye Li
ebb9aab318 imx: load calibration parameters from fuse for i.MX8MP
i.MX8MP thermal which has two probes and supports temperature range
from -40 to 125.  The driver still uses default 1p HW
calibration at 25C and loads calibration parameters from fuse.

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Ye Li
94c693d782 imx: i.MX8MN: Enable loading TASR and TCALIV from fuse
Like iMX8MM, iMX8MN also needs SW to load TMU TASR and TCALIV registers
value from fuse before enabling TMU calibration. Otherwise the calibration
is not exact.

Reviewed-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Ye Li
70487ff386 imx8mm: Load fuse for TMU TCALIV and TASR
On iMX8MM, the default value of TMU registers TCALIV and TASR need
be loaded from fuse. HW won't do this, it expect SW loads them before
using TMU.

Reviewed-by: Bai Ping <ping.bai@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Peng Fan
3c42c0f673 imx: add module fuse support
There are different parts from one SoC. Take i.MX6ULL for example,
some part might not have ENET, some might have; some might not have
USB, some might have. The information could be got from OCOTP,
to make one image support the different parts, we need runtime
disable linux kernel dts node and uboot driver probe if the
corresponding module not exists in the part.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 13:21:13 +02:00
Marek Vasut
b52fb0b0b5 ARM: imx: pico-imx8mq: Add support for Technexion Pico-iMX8MQ
Add initial support for Technexion Pico-iMX8MQ SoM on PicoPI carrier
board. Currently working is ethernet, serial, eMMC. DT is imported
from Linux 5.4.28 ("462afcd6e7ea") .

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: "NXP i.MX U-Boot Team" <uboot-imx@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2020-05-10 13:19:39 +02:00
Harald Seiler
d81a68957f imx: spl: Fix use of removed SPL_FAT_SUPPORT config
CONFIG_SPL_FAT_SUPPORT was removed in commit 0c3a9ed409
("spl: Kconfig: Replace CONFIG_SPL_FAT_SUPPORT with CONFIG_SPL_FS_FAT").
Fixup a leftover use of the symbol.

Fixes: 9d86dbd9cf ("imx: spl: implement spl_boot_mode for i.MX7/8/8M")
Signed-off-by: Harald Seiler <hws@denx.de>
2020-05-01 18:48:48 +02:00
Harald Seiler
5fc5bac67b imx: spl: Remove ifdefs in spl_mmc_boot_mode()
It is hard to read code which contains nested ifdef blocks.  Replace
them with normal if-blocks and the IS_ENABLED() macro.  This is not only
more readable but also helps as both arms are validated by the compiler
in all cases.

Signed-off-by: Harald Seiler <hws@denx.de>
2020-05-01 18:48:36 +02:00
Harald Seiler
15aec318ef Revert "imx: Introduce CONFIG_SPL_FORCE_MMC_BOOT to force MMC boot on falcon mode"
The CONFIG_SPL_FORCE_MMC_BOOT config flag is not needed as its behavior
is the correct one in all cases;  using spl_boot_device() instead of the
boot_device parameter will lead to inconsistency issues, for example,
when a board_boot_order() is defined.  In fact, this is the reason the
parameter was introduced in the first place, in commit 2b1cdafa9f
("common: Pass the boot device into spl_boot_mode()").

This reverts commit 772b55723b.

Link: https://lists.denx.de/pipermail/u-boot/2020-April/405979.html
Signed-off-by: Harald Seiler <hws@denx.de>
2020-05-01 18:47:07 +02:00
Anatolij Gustschin
a15d0aa680 imx: spl: return boot mode for asked MMC device in spl_mmc_boot_mode()
Boards may extend or re-define the boot list in their board_boot_order()
function by modifying spl_boot_list. E.g. a board might boot SPL from a
slow SPI NOR flash and then load the U-Boot from an eMMC or SD-card.
Or it might use additional MMC boot device in spl_boot_list for cases
when the image in SPI NOR flash is not found, so it could fall back to
eMMC, SD-card or another boot device.

Getting the MMC boot mode in spl_mmc will fail when we are trying to
boot from an MMC device in the spl_boot_list and the original board
boot mode (as returned by spl_boot_device()) is not an MMC boot mode.
Fix it by checking the asked MMC boot device from the spl_mmc_boot_mode()
argument.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2020-05-01 18:46:55 +02:00
Alifer Moraes
ef99f3d9e8 arm: imx: Add support for Google's Coral Dev Board
Add initial support for Google's Coral Dev Board based on i.MX8MQ.

https://coral.ai/products/dev-board

The Phanbell naming has been used here to match the naming convention
used in Google's U-Boot source tree:

https://coral.googlesource.com/uboot-imx/

Co-developed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com>
Tested-by: Marco Franchi <marcofrk@gmail.com>
2020-05-01 13:49:15 +02:00
Claudius Heine
c5635a032a ARM: imx8m: Don't use the addr parameter of reset_cpu()
imx8m has the only implementation of reset_cpu() which does not ignore
the addr parameter and instead gives it some meaning as the base address
of watchdog registers.  This breaks convention with the rest of U-Boot
where the parameter is ignored and callers are passing in 0.

Fixes: d2041725e8 ("imx8m: restrict reset_cpu")
Co-developed-by: Harald Seiler <hws@denx.de>
Signed-off-by: Harald Seiler <hws@denx.de>
Signed-off-by: Claudius Heine <ch@denx.de>
2020-05-01 13:46:22 +02:00
Harald Seiler
568af92679 ARM: imx8m: Fix indentation of reset_cpu() function
Use proper code-style, tabs instead of spaces for indentation.

Signed-off-by: Harald Seiler <hws@denx.de>
2020-05-01 13:46:22 +02:00
Marek Vasut
efa1a62ad2 ARM: imx8m: Do not define do_reset() if sysreset is enabled
The SPL can also be compiled with sysreset drivers just fine, so
update the condition to cater for that option.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Flavio Suligoi <f.suligoi@asem.it>
Cc: Harald Seiler <hws@denx.de>
Cc: Igor Opaniuk <igor.opaniuk@toradex.com>
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Cc: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2020-05-01 13:46:22 +02:00
Marek Vasut
dabaabd3f1 ARM: imx: imx8m: Do not warn about cpu-idle-states if missing
If the cpu-idle-states is missing from the DT in the first place, do
not fail on removing in. Just move on and do not even print an error,
since not being able to remove something which is not there in the
first place is not an error and surely does not justify failing to
boot.

Turn the surrounding prints into debugs to reduce the useless noise.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Frieder Schrempf <frieder.schrempf@kontron.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-05-01 13:46:22 +02:00
Claudius Heine
3675d93875 imx: imx8m: Don't use the addr parameter of reset_cpu
imx8m has the only implementation of `reset_cpu` which does not ignore
the addr parameter and instead gives it some meaning as the base address
of watchdog registers.  This breaks convention with the rest of U-Boot
where the parameter is ignored and callers are passing in 0.

Fixes: d2041725e8 ("imx8m: restrict reset_cpu")
Co-Authored-by: Harald Seiler <hws@denx.de>
Signed-off-by: Claudius Heine <ch@denx.de>
Signed-off-by: Harald Seiler <hws@denx.de>
Reviewed-by: Marek Vasut <marex@denx.de>
2020-05-01 13:46:22 +02:00
Franck LENORMAND
242d1cd69b imx8: Configure SNVS
Add a module to configure the tamper and secure violation of
the SNVS using the SCU API.

The module also adds some commands:
 - snvs_cfg: Configure the SNVS HP and LP registers
 - snvs_dgo_cfg: Configure the SNVS DGO bloc if present (8QXP)
 - tamper_pin_cfg: Change the configuration of the tamper pins
 - snvs_clear_status: Allow to write to LPSR and LPTDSR to clear
   status bits

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-01 13:46:22 +02:00
Ye Li
7247974643 imx8m: Enable WDOG_B for timeout
When doing reset_cpu, in normal case the WDOG_B outputs immediately
after we clean WDA bit. But on mscale, the WDOG_B may be later than
internal reset, and cause PMIC not reset. As we enabled the SD3.0
support, the PMIC must be reset to reset SD card.

Change the reset_cpu to enable the WDOG_B for timeout as well, and set
WDOG timeout to 1s.

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-01 13:46:22 +02:00
Ye Li
1c97fcda7f imx8mm: clock: fix fracpll decode issue
The fracpll decoding is using the bit definitions for int pll. Most of
them are same, but the CLKE bit is different. Fix the wrong CLKE_MASK
for fracpll and correct all bit definitions in fracpll decoding.

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-01 13:46:22 +02:00
Peng Fan
828ad358a5 imx8: parser: fix some bad debug message formating
In SPL build, the formatting '%llx' in debug() is not supported.
Also, fix some misplaced parameters in printf.

Modified from Seb Fagard's downstream patch

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-01 13:46:22 +02:00
Seb Fagard
0e248b5f02 imx8: ahab: fix some bad debug message formating
In SPL build, the formatting '%llx' in debug() is not supported.
Also, fix some misplaced parameters in printf.

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Seb Fagard <sebastien.fagard@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-01 13:46:22 +02:00
Peng Fan
abf7752c40 imx8: ahab: fix 'end address' parameter of rm_find_memreg
parameter 'end address' must be inclusive of address range.

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-01 13:46:21 +02:00
Ye Li
a903e13f97 imx8: Change to use new SECO API commands
Latest SCFW has removed old MISC SECO commands. So update the codes
to use new SECO commands.

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-05-01 13:46:21 +02:00
Peng Fan
b7328de6cd imx8: parser: fix 'end address' parameter of rm_find_memreg
parameter 'end address' must be inclusive of address range.

Modified from Seb's downstream patch.

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-01 13:46:21 +02:00
Ye Li
6fcd0b2388 imx8m: Dump DRAM PLL rate by clocks command
Add the dump of DRAM PLL into "clocks" command

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
2020-05-01 13:46:21 +02:00
Peng Fan
712a341c76 imx8mq: Set ARM core clock directly from ARM PLL
For ARM core clock, there are two input branches, and can select via mux:
one from ARM PLL directly, second from CCM A53 clock root.

Currently we are using second branch. But IC confirmed the CCM A53 root
signoff timing is 1Ghz, so we should switch to input from ARM PLL directly.

This patch fixes the CORE SEL slice configuration and switch ARM clock
to ARM PLL.

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-01 13:46:21 +02:00
Ye Li
15a7426045 imx8mq: Enable eMMC HS400 and SD UHS mode on EVK
iMX8MQ EVK board has a eMMC5.0 chip and supports SD3.0, so enable the UHS
and HS400 configs to enhance the eMMC/SD access.

The change also needs to set usdhc clock to 400Mhz, and add the
off-on-delay-us to SD reset pin, otherwise some SD cards will
fail to select UHS mode in re-initialization.

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-01 13:46:21 +02:00
Peng Fan
6b87b3f4dc imx8m: update clock root and fix core_sel
Update clock root table to let it be easy to configure clock at
very early stage. Also the core_sel mux parent should be A53 CLK
root and ARM PLL.

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-01 13:46:21 +02:00
Peng Fan
a07bcec403 imx8m: acquire ATF commit hash
Acquire ATF commit hash when booting U-Boot to make user easy
to know the ATF version.

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-01 13:46:21 +02:00
Peng Fan
3f49742801 imx8: move SIP macro to common header
Move the SIP macro to common header and unify the name to
make others could reuse them.

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-01 13:46:21 +02:00
Peng Fan
c915403218 imx: imx8m: add i.MX8MN variants support
Add i.MX8MN variants support

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-01 13:46:21 +02:00
Peng Fan
cb1a1de6a0 imx: imx8m: add i.MX8MQ Dual and QuadLite support
Add i.MX8MQ Dual and QuadLite variants.

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-01 13:46:21 +02:00
Peng Fan
354dcce682 imx: cpu: support speed grade for i.MX8MP
i.MX8MP speed grade use same layout as i.MX8MN, so reuse it for i.MX8MP

Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-01 13:46:21 +02:00
Peng Fan
47586a4a55 imx8mn: Update speed grade
imx8mn speed grade fuse uses new definitions as below. So have
to update get_cpu_speed_grade_hz function to match it.

SPEED_GRADE[5:4]    SPEED_GRADE[3:0]    MHz
      xx                0000            2300
      xx                0001            2200
      xx                0010            2100
      xx                0011            2000
      xx                0100            1900
      xx                0101            1800
      xx                0110            1700
      xx                0111            1600
      xx                1000            1500
      xx                1001            1400
      xx                1010            1300
      xx                1011            1200
      xx                1100            1100
      xx                1101            1000
      xx                1110             900
      xx                1111             800

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-05-01 13:46:21 +02:00
Ye Li
c9a1a24be5 imx8mm: Update CPU speed grading
According to iMX8MM datasheet (IMX8MMIEC_Rev_D and IMX8MMCEC_Rev_D),
the speed grading for imx8mm is 800Mhz, 1.2Ghz, 1.6Ghz and 1.8Ghz.
Update them to get_cpu_speed_grade_hz function.

Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-05-01 13:46:21 +02:00
Marek Vasut
126dcc925d ARM: imx: imx8mm: Add missing clock entries for FEC clock
All the FEC ethernet clock entries for iMX8MM are missing, while they
are already present on iMX8MQ. Fill in the nodes on iMX8MM, as the FEC
ethernet gets bogus clock information otherwise which makes ethernet
inoperable.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-05-01 13:46:21 +02:00
Harald Seiler
e97590654a spl: mmc: Rename spl_boot_mode() to spl_mmc_boot_mode()
The function's name is misleading as one might think it is used
generally to select the boot-mode when in reality it is only used by the
MMC driver to find out in what way it should try reading U-Boot Proper
from a device (either using a filesystem, a raw sector/partition, or an
eMMC boot partition).

Rename it to spl_mmc_boot_mode() to make it more obvious what this
function is about.

Link: https://lists.denx.de/pipermail/u-boot/2020-April/405979.html
Signed-off-by: Harald Seiler <hws@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-22 20:41:57 +08:00
Tom Rini
d1bbf833aa Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx 2020-04-20 08:45:27 -04:00
Giulio Benetti
931edc6efb Add support for i.MXRT1020-EVK board
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-04-18 14:55:00 +02:00
Giulio Benetti
07cae0d147 Add i.MXRT1020 support
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-04-18 14:54:36 +02:00
Michael Krummsdorf
41231dac21 arch: arm: tqma6: apply default Kconfig for device model
Signed-off-by: Michael Krummsdorf <michael.krummsdorf@ew.tq-group.com>
2020-04-17 18:58:03 +02:00
Bernhard Messerklinger
7794d889d3 arm: imx6: configure NoC on i.MX6DQP
The i.MX6DP and i.MX6QP incorporate NoC interconnect logic
which needs to be configured in order to use external DDR memory.

This patch enables the SPL to configure the necessary registers
in accordance with the NXP engineering bulletin EB828.

Co-developed-by: Filip Brozović <fbrozovic@gmail.com>

Signed-off-by: Bernhard Messerklinger <bernhard.messerklinger@br-automation.com>
Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
2020-04-17 18:56:19 +02:00
Fabio Estevam
cbc81b735e mx7ulp: Only enable LDO if it is not already enabled
LDO mode may be already enabled by the ROM and enabling it again
can cause U-Boot to hang.

Avoid this problem by only enabling LDO mode if it is initially disabled.

Reported-by: Jorge Ramirez-Ortiz <jorge@foundries.io>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Jorge Ramirez-Ortiz <jorge@foundries.io>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-04-17 18:54:14 +02:00
Fabio Estevam
2cfdb3bca7 mx7ulp: Remove duplicated definitions
These PMC0 definitions are already defined in the beginning
of the file, so remove the duplication.

Reported-by: Stefano Babic <sbabic@denx.de>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-04-17 18:54:04 +02:00
Patrick Delaunay
9d82cbd39a arm: imx: update reference to README.mxc_hab
Update reference in files detected by
scripts/documentation-file-ref-check

doc/README.mxc_hab  => doc/imx/habv4/*

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-16 23:06:54 -04:00
Tom Rini
8914831860 Merge branch 'next'
Pull in changes that have been pending in our 'next' branch.  This
includes:
- A large number of CI improvements including moving to gcc-9.2 for all
  platforms.
- amlogic, xilinx, stm32, TI SoC updates
- USB and i2c subsystem updtaes
- Re-sync Kbuild/etc logic with v4.19 of the Linux kernel.
- RSA key handling improvements
2020-04-13 11:27:00 -04:00
Ye Li
0db0ba6141 imx: Fix imx8m FIT script issue
The FIT config node has reversed ATF and u-boot: ATF is set to 'firmware' but
u-boot is set to 'loadables'.
This script can work previously because spl fit driver wrongly appends fdt to
all loadable images. With the issue fixed in commit 9d15d1d1c2 ("Revert
"common: spl_fit: Default to IH_OS_U_BOOT if FIT_IMAGE_TINY enabled"") the
u-boot in 'loadables' does not have fdt appended and fails to work.  So correct
the script by moving u-boot to 'firmware' and ATF to 'loadables'.

Signed-off-by: Ye Li <ye.li@nxp.com>
Reported-by: Matt Porter <mporter@konsulko.com>
Tested-by: Matt Porter <mporter@konsulko.com>
2020-04-09 13:07:32 -04:00
Tom Rini
2738f0edea Merge tag 'ti-v2020.07-next' of https://gitlab.denx.de/u-boot/custodians/u-boot-ti into next
K3 J721E:
* OSPI boot support
* Support for loading remote cores in R5 SPL
* PMIC ESM Support
* Minor fixes for R5F and C7x remoteproc drivers

K3 AM654:
* Update AVS class 0 voltages.
* Add I2C nodes

DRA7xx/AM57xx:
* Fixed Android boot on AM57xx

AM33/AM43/Davinci:
* switch to driver model for the net and mdio driver for baltos
* Add DM/DTS support for omap video driver
* Enable fastboot on am335x-evm
2020-03-17 11:59:58 -04:00
Tom Rini
36bdcf7f3b Merge tag 'mmc-2020-3-9' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmc
- DM support for CAxxxx SoCs
- eMMC board for presidio-asic
- Add defer probe for mmc sdhci
- TI SoCs mmc misc update
2020-03-10 21:13:26 -04:00
Frieder Schrempf
291e3ab904 imx8mm/mn: Add missing root clock entry for ARM core clock
The current implementation in arch/arm/mach-imx/cpu.c uses non-DM
code to retrieve the core clock frequency. As the root clock is not
listed we currently get:

CPU:   Freescale i.MX8MMQ rev1.0 at 0 MHz

Fix this by adding the missing entry, which results in:

CPU:   Freescale i.MX8MMQ rev1.0 at 1200 MHz

Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-03-09 15:06:15 +01:00
Oliver Graute
789ddde113 imx: Makefile: added missing ahab.o
added missing ahab.o in Makefile

Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Ye Li <ye.li@nxp.com>
Cc: uboot-imx <uboot-imx@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-03-09 15:05:38 +01:00
Faiz Abbas
cf00825596 spl: mmc: Fix spl_mmc_get_uboot_raw_sector() implementation
The call to spl_mmc_get_uboot_raw_sector() completely ignores and
overwrites the raw_sect value passed from the caller of spl_mmc_load().

Fix this by passing raw_sect to the function and returning the same
value in the default case.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-03-09 08:33:16 +08:00
Keerthy
805b3cac1e lib: elf: Move the generic elf loading/validating functions to lib
Move the generic elf loading/validating functions to lib/
so that they can be re-used and accessed by code existing
outside cmd.

While at it remove the duplicate static version of load_elf_image_phdr
under arch/arm/mach-imx/imx_bootaux.c.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Suggested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-03-03 13:08:14 +05:30
Tom Rini
9a8942b53d sandbox conversion to SDL2
TPM TEE driver
 Various minor sandbox video enhancements
 New driver model core utility functions
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAl48iogACgkQfxc6PpAI
 reaVzAf/an3/yKe6r3CVWlcRV6H/dVg1ApnnLpX7jS0p0b++oCVvOiy7z1WPXj3k
 b1SSgENDeeZ/8EHio+Gf7ZidH/TGEj7L6YEFwd1t60GMkZiWEkNf4Z53tw482YG+
 96hoPD+ySTW+ddIdVHWAFG2I4aEiKHANJAp/ItNdD+rLbrEwNQy+eiK5JTOk80B6
 /X8AJCLZeAC1s7vs+2+WolgjT78QGzA9HHalMiublcqh0ivKKk0QeQiOKKPe8JYJ
 om5YY1TxayQ60Xmo5f39/SBfzEEklxw83sU9o1tBeYzyVUpu7fQdkxiDbWdsij77
 DgwLdeYQJGbN+hdSWE0gjTqyhW+lWA==
 =KRoA
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-6feb20' of https://gitlab.denx.de/u-boot/custodians/u-boot-dm

sandbox conversion to SDL2
TPM TEE driver
Various minor sandbox video enhancements
New driver model core utility functions
2020-02-11 10:58:41 -05:00
Marek Vasut
b91f28de83 ARM: imx: novena: Enable DM ethernet
Convert to DM ethernet to prevent board removal.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Vagrant Cascadian <vagrant@debian.org>
2020-02-09 15:03:54 +01:00
Marek Vasut
e772b4fea8 ARM: imx: novena: Move defconfig bits to arch Kconfig
Just move the defconfig entries which are required into the Novena
entry in arch Kconfig, no functional change.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Vagrant Cascadian <vagrant@debian.org>
2020-02-09 15:03:23 +01:00
Igor Opaniuk
14d5aeff77 board: toradex: Add Verdin iMX8M Mini support
This adds initial minimal support for the Toradex Verdin iMX8M Mini Quad
2GB WB IT V1.0A module. They are now strapped to boot from eFuses which
are factory fused to properly boot from their on-module eMMC. U-Boot
supports booting from the on-module eMMC only, SDP support is disabled
for now due to missing i.MX 8M Mini USB support.

Functionality wise the following is known to be working:
- eMMC, 8-bit and 4-bit MMC/SD card slots
- Ethernet
- GPIOs
- I2C

Boot sequence is:
SPL ---> ATF (TF-A) ---> U-boot proper

ATF, U-boot proper and u-boot.dtb images are packed into a FIT image,
loaded by SPL.

Boot:
U-Boot SPL 2020.01-00187-gd411d164e5 (Jan 26 2020 - 04:47:26 +0100)
Normal Boot
Trying to boot from MMC1
NOTICE:  Configuring TZASC380
NOTICE:  RDC off
NOTICE:  BL31: v2.0(release):rel_imx_4.14.98_2.3.0-0-g09c5cc994-dirty
NOTICE:  BL31: Built : 01:11:41, Jan 25 2020
NOTICE:  sip svc init

U-Boot 2020.01-00187-gd411d164e5 (Jan 26 2020 - 04:47:26 +0100)

CPU:   Freescale i.MX8MMQ rev1.0 at 0 MHz
Reset cause: POR
DRAM:  2 GiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... OK
In:    serial
Out:   serial
Err:   serial
Model: Toradex Verdin iMX8M Mini Quad 2GB Wi-Fi / BT IT V1.0A, Serial#
 06535149
Net:   eth0: ethernet@30be0000
Hit any key to stop autoboot:  0
Verdin iMX8MM #

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-02-09 14:50:52 +01:00
Simon Glass
336d4615f8 dm: core: Create a new header file for 'compat' features
At present dm/device.h includes the linux-compatible features. This
requires including linux/compat.h which in turn includes a lot of headers.
One of these is malloc.h which we thus end up including in every file in
U-Boot. Apart from the inefficiency of this, it is problematic for sandbox
which needs to use the system malloc() in some files.

Move the compatibility features into a separate header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05 19:33:46 -07:00
Simon Glass
61b29b8268 dm: core: Require users of devres to include the header
At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
2020-02-05 19:33:46 -07:00
Pedro Jardim
2f39ab1649 clock_imx8mq: Make frac_pll_init() static
Since frac_pll_init() is only used in this file, change it to 'static'.

This fixes the following sparse warning:

arch/arm/mach-imx/imx8m/clock_imx8mq.c:662:5: warning: no previous
prototype for ‘frac_pll_init’ [-Wmissing-prototypes]

Signed-off-by: Pedro Jardim <jardim.c.pedro@gmail.com>
2020-01-26 21:57:09 +01:00
Pedro Jardim
852cd55ea7 clock_imx8mq: Remove the function sscg_pll_init()
Function sscg_pll_init() is not used anywhere, so it can simply be deleted.
This was found because of the following sparse
warning:

arch/arm/mach-imx/imx8m/clock_imx8mq.c:702:5: warning: no previous prototype for ‘sscg_pll_init’ [-Wmissing-prototypes]
 int sscg_pll_init(u32 pll)
     ^~~~~~~~~~~~~

Signed-off-by: Pedro Jardim <jardim.c.pedro@gmail.com>
2020-01-26 21:57:08 +01:00
Pedro Jardim
953d02f001 clock_imx8mq: Make do_imx8m_showclocks() static
Since do_imx8m_showclocks() is only used inside this file, make it 'static'.

This fixes the following sparse warning:

arch/arm/mach-imx/imx8m/clock_imx8mq.c:836:5: warning: no previous prototype
 for ‘do_imx8m_showclocks’ [-Wmissing-prototypes]
 int do_imx8m_showclocks(cmd_tbl_t *cmdtp, int flag, int argc,
     ^~~~~~~~~~~~~~~~~~~

Signed-off-by: Pedro Jardim <jardim.c.pedro@gmail.com>
2020-01-26 21:57:08 +01:00
Pedro Jardim
fb3c4d926f clock_imx8mq: Delete not used init_usb_clk()
Function init_usb_clk() is not used anywhere, so it can simply be deleted.
This was detected by the following sparse warning:

arch/arm/mach-imx/imx8m/clock_imx8mq.c:377:6: warning: no previous prototype
 for ‘init_usb_clk’ [-Wmissing-prototypes]
 void init_usb_clk(void)
      ^~~~~~~~~~~~

Signed-off-by: Pedro Jardim <jardim.c.pedro@gmail.com>
2020-01-26 21:57:08 +01:00
Tom Rini
ad647690b1 ---------------------------------
imx8: cleanup, fix warnings
 imx6ull: add VisionSOM SoM and EVK
 mx7ulp: fix warning due network, cleanup
 mx7dsabre: Fix dm probe pmic
 imx6: fixed for vining2000
 
 Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/639512296
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAl4m+D4PHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et3hz0L/Rm48j733TNi7ZokndEr0+caMqk6PmJWE0Dy
 Uq4MwhhCkbPWP+uLQUY6yq64HXdx1fNaQnRzPiiaX2Ng9E/E9piOaYOKtKKs1j4q
 W+RiWfrGebgMemb8f2j4cot23KMUVk5/rv+EFn+oJkX7HD4ou/ikB4269/7b75Dg
 1HsrsjWQq7Wsi4baVZZcfs92xTXltpkGEzgKFURt1tqU1TT1I+PX92aM/Df+qUYu
 ++DQTMr0kZ/yMlzxTvUJYN0KRkMnn6W07X/qQyU1YwioQmC1ZJ7zYBNZfoAG1XFs
 0g6+XqfgLsDrTIeqz4/b98exXPdQqFNgRlUFnbVa0hZcehwxFUsb8J9edPl60k3r
 SYTOaIB8KuKstaNnaWJZm678THDrAXwpxSH9/ORRLX9tCnGBOY1Uy9Q+TJtpQ4K+
 YGEeoKhMTMFcWxxZvpT75tvJMtcRdUw9rT+a5yuyD56NdYUmwiEw5c8hBa3vc26X
 C9P5jBxXbZIQQW67wMt0fFT1QdU5RA==
 =qKsO
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20200121' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

---------------------------------

imx8: cleanup, fix warnings
imx6ull: add VisionSOM SoM and EVK
mx7ulp: fix warning due network, cleanup
mx7dsabre: Fix dm probe pmic
imx6: fixed for vining2000

Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/639512296
2020-01-21 08:36:50 -05:00
Alifer Moraes
c27483fcb0 imx8m: clock_imx8mm: Staticize functions
Functions fracpll_configure(), decode_intpll(), decode_fracpll(),
get_root_src_clk() and get_root_clk() are used only in the scope of this
file, so make them static to fix the following sparse warnings:

arch/arm/mach-imx/imx8m/clock_imx8mm.c:50:5: warning: no previous
prototype for ‘fracpll_configure’ [-Wmissing-prototypes]
arch/arm/mach-imx/imx8m/clock_imx8mm.c:271:5: warning: no previous
prototype for ‘decode_intpll’ [-Wmissing-prototypes]
arch/arm/mach-imx/imx8m/clock_imx8mm.c:418:5: warning: no previous
prototype for ‘decode_fracpll’ [-Wmissing-prototypes]
arch/arm/mach-imx/imx8m/clock_imx8mm.c:483:5: warning: no previous
prototype for ‘get_root_src_clk’ [-Wmissing-prototypes]
arch/arm/mach-imx/imx8m/clock_imx8mm.c:527:5: warning: no previous
prototype for ‘get_root_clk’ [-Wmissing-prototypes]

Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com>
2020-01-20 15:38:16 +01:00
Jorge Ramirez-Ortiz
30b8eb5ee6 mx7ulp: soc: s_init should only be executed once
On SPL enabled systems, the current s_init code (wdog, clock and ldo
init) is executed twice (by SPL and u-boot). This is not necessary and
might lead to boot issues (ie, starting PMC1 when it is already running).

Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-01-20 15:38:16 +01:00
Arkadiusz Karas
5b6f8f3083 ARM: imx: mx6ull: Add iMX6ULL VisionSOM SoM and EVK
Add iMX6ULL VisionSOM SoM and VisionCB-RT-STD evaluation board support.
The SoM has an iMX6ULL, 512 MiB of DRAM and microSD slot. The carrier
board has Ethernet, USB host port, USB OTG port.

Signed-off-by: Arkadiusz Karas <arkadiusz.karas@somlabs.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2020-01-20 15:38:16 +01:00
Simon Glass
db41d65a97 common: Move hang() to the same header as panic()
At present panic() is in the vsprintf.h header file. That does not seem
like an obvious choice for hang(), even though it relates to panic(). So
let's put hang() in its own header.

Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Migrate a few more files]
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-17 17:53:40 -05:00
Simon Glass
9b4a205f45 common: Move RAM-sizing functions to init.h
These functions relate to memory init so move them into the init
header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17 14:02:35 -05:00
Simon Glass
9a3b4ceb37 common: Move reset_cpu() to the CPU header
Move this function out of common.h and into a relevant header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17 14:02:31 -05:00
Simon Glass
d96c26040e common: Move clock functions into a new file
These three clock functions don't use driver model and should be migrated.
In the meantime, create a new file to hold them.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17 13:27:29 -05:00