CONFIG options must not use lower-case letter. Convert this and related
ones to upper case.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@foundries.io>
Add the display of the STMicroelectronics board identification saved in OTP
in stm32mp2 checkboard function.
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Implement the weak function checkboard to identify the used board with
compatible in device tree for the support of stm32mp2 STMicroelectronics
boards.
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Activate the command stboard for stm32mp25 STMicroelectronics boards,
add the default used OTP identifier and the associated board identifier:
- stm32mp25xx-ev1 = MB1936
- stm32mp25xx-dk = MB1605
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Add support for the Anbernic RG-ARC-D, Anbernic RG-ARC-S, Powkiddy
RK2023, and Powkiddy RGB30 to the Anbernic RGxx3. While the Powkiddy
devices are manufactured by Powkiddy instead of Anbernic,
the hardware is so similar they can all use the same bootloader.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Allow all rockchip devices to use the hardware RNG to seed Linux
RNG.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Make the inability to detect a panel using the auto detection code not
fail the entire boot process. This means that if the panel ID cannot
be read we don't set an environment variable for the panel, and if an
environment variable for the panel is not set we don't attempt to
update the compatible string. Changes to the code also ensure that
when there are multiple compatible strings required for the panel
we use them both, which solves some issues that will pop up soon
for the Linux driver.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
U-Boot proper automatically modifies boot_targets to swap the order in
which MMC storage media are used for standard boot based on which MMC
storage medium was used to load U-Boot proper. This is however only done
if the user has not changed it manually, therefore a check between the
default and current value is done.
This used to work fine until the migration to standard boot where
boot_targets value size in the default environment went above the 32
characters that env_get_default function can return, thus resulting in a
truncated variable.
Therefore the check between default and current value would always fail.
By using the newly added env_get_default_into function, a buffer of
the appropriate size can be allocated on the stack to get the whole
value of boot_targets in the default environment and thus fixing the
check.
Cc: Quentin Schulz <foss+uboot@0leil.net>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Ringneck PX30 and Puma RK3399 both have the same expectation with regard
to bootstd device order and U-Boot environment storage device, except
that Puma RK3399 also supports SPI Flash.
Let's move all of this into a common file where common logic can be put.
Cc: Quentin Schulz <foss+uboot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
To prepare to put the similar logic around storage medium selection for
Ringneck PX30 and Puma RK3399 in common, let's not use hardcoded paths
but use uclass functions instead to find udevice based on their DT node
full path.
Cc: Quentin Schulz <foss+uboot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
To prepare to put the similar logic around storage medium selection for
Ringneck PX30 and Puma RK3399 in common, let's not use hardcoded paths
but use uclass functions instead to find udevice based on their DT node
full path.
Cc: Quentin Schulz <foss+uboot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The NanoPi R2C Plus is a small variant of NanoPi R2C with a on-board
eMMC flash (8G) included.
The device tree is taken from the kernel v6.5.
Signed-off-by: Tianling Shen <cnsztl@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The TMDS64EVM [1] ships with AM64X SR2.0 HS-FS chip
and a slightly different board name in the board information
EEPROM header. Support this board.
[1] https://www.ti.com/tool/TMDS64EVM
Gets rid of below message at boot
"Unidentified board claims AM64-EVM in eeprom header"
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Nishanth Menon <nm@ti.com>
Clean up all configuration files to adhere to yamllint rules.
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
[trini: Update more yaml files added since this was posted]
Signed-off-by: Tom Rini <trini@konsulko.com>
Suggested-by: Nishanth Menon <nm@ti.com>
xilinx:
- Enable NFS, WGET, DNS and BLKMAP by default
zynqmp:
- Support new power-management node
- Remove multiple blank lines from DTSes
- Wire multiboot with DFU infrastructure
- Fix i2c-gpio pinctrl group name
- SOM DT changes (phy on kd240, kv260 cleanups
- Cleanup i2c bus on zcu1285
- DT cleanup (fix node names not to use _)
- Fix USB interrupts
- Cleanup zcu100 DT
- Add support for kaslr-seed
zynqmp_r5:
- Fix W=1 issue with missing dir
tools:
- Improve zynqmpimage mkimage support
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCZae/pAAKCRDKSWXLKUoM
IadKAJ9p4nP4Fy3DKfRJjpVoFE+7OR9ZUQCfYtWhN5eNKayfxcw9wnvuv/SggFU=
=95oH
-----END PGP SIGNATURE-----
Merge tag 'xilinx-for-v2024.04-rc1-v2' of https://source.denx.de/u-boot/custodians/u-boot-microblaze
Xilinx changes for v2024.04-rc1-v2
xilinx:
- Enable NFS, WGET, DNS and BLKMAP by default
zynqmp:
- Support new power-management node
- Remove multiple blank lines from DTSes
- Wire multiboot with DFU infrastructure
- Fix i2c-gpio pinctrl group name
- SOM DT changes (phy on kd240, kv260 cleanups
- Cleanup i2c bus on zcu1285
- DT cleanup (fix node names not to use _)
- Fix USB interrupts
- Cleanup zcu100 DT
- Add support for kaslr-seed
zynqmp_r5:
- Fix W=1 issue with missing dir
tools:
- Improve zynqmpimage mkimage support
* add generated index to table of contents
* create index entries for commands
* update Python packages used to build the documentation
* fix typos in dfu documentation
UEFI:
* split unrelated code from efi_bootmgr.c
* rename CONFIG_BOOTEFI_BOOTMGR to CONFIG_EFI_BOOTMGR
* net: tftp: remove explicit EFI configuration dependency
* fs: remove explicit EFI configuration dependency
Other:
* Add Goldfish RTC driver and make it available on RISC-V QEMU
-----BEGIN PGP SIGNATURE-----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=q+5u
-----END PGP SIGNATURE-----
Merge tag 'efi-2024-04-rc1-2' of https://source.denx.de/u-boot/custodians/u-boot-efi
Documentation:
* add generated index to table of contents
* create index entries for commands
* update Python packages used to build the documentation
* fix typos in dfu documentation
UEFI:
* split unrelated code from efi_bootmgr.c
* rename CONFIG_BOOTEFI_BOOTMGR to CONFIG_EFI_BOOTMGR
* net: tftp: remove explicit EFI configuration dependency
* fs: remove explicit EFI configuration dependency
Other:
* Add Goldfish RTC driver and make it available on RISC-V QEMU
QEMU's virt board provides an emulated Goldfish RTC. Enable the driver by
default.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Create a ft_board_setup() api that gets called as part
of bootm/booti before jumping to kernel. In this
ft_board_setup() callback that will inspect the DTB
and insert the device tree blob with the "kaslr-seed" property.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20240117032014.1014084-2-venkatesh.abbarapu@amd.com
Add pe2201 platform code and the device tree of pe2201 platform board.
The initial support comprises the UART and PCIe.
Signed-off-by: TracyMg_Li <TracyMg_Li@outlook.com>
Changes since v1:
fix space corrupt.
Changes since v2:
switch to bootstd and text environment.
Changes since v3:
add environment variables.
Qualcomm architecture changes:
* Move clock and pinctrl drivers out of mach-snapdragon
* Various clock driver improvements
* Convert PMIC power/reset key driver to use the button API
* Preparetory work for migrating to upstream DT
The PMIC button driver is a much better representation of the hardware
here, adjust the boards to use upstream DT and the PMIC button driver
instead of exposing the buttons as GPIOs and relying on the GPIO-button
driver.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Tested-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Currently, it isn't possible to build clock drivers for more than one
platform due to how the msm_enable() and msm_set_rate() callbacks are
implemented.
Extend qcom_clk_data to include function pointers for these and convert
all platforms to use them.
Previously, clock drivers relied on include/configs/<board.h> to include the
board specific sysmap header, however as most of the header contents are clock
driver related, import the contents directly into each clock driver and
remove the header. The only exception here is the dragonboard820c board file
which includes some pinctrl macros, those are also inlined.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
[caleb: remove additional sysmap-sdm845.h mention]
We load two boot image source descriptor structures from last
two sectors in the SPI NOR flash and determine the boot source
for loading the kernel/DTB images, then adjust the boot order for
loading image from eMMC boot0 or boot1 partition.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Lukasz Majewski <lukma@denx.de>
The default set of environment variables from CFG_EXTRA_ENV_SETTINGS
has been moved to a separate file - board/liebherr/xea/xea.env
Adjustments done:
- fitImage support
- SPI-NOR layout re-organization
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Commit aa7858fe5e ("board: phytec: som_detection: move definitions to
source file") moved function definitions from header to source file.
Makefile however was not updated to unconditionally (from
[..]_SOM_DETECTION) build the imx8 and phytec som detection units.
Also remove unused includes that cause build failures on arm 32bit
boards. SoM detection shall support 32bit boards as well, but arch
specific code should not be included in the generic module.
Fixes: aa7858fe5e ("board: phytec: som_detection: move definitions to source file")
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Add brief documentation on how to build a bootable U-Boot image for the
phyGATE-Tauri-L.
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Reviewed-by: Teresa Remmet <t.remmet@phytec.de>
phyGATE-Tauri-L-iMX8MM is a Gateway based on the phycore-imx8mm SoM.
As a result, all the board code of the phycore-imx8mm is used.
Device tree synced with kernel v6.7.
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Reviewed-by: Teresa Remmet <t.remmet@phytec.de>
There is a new eDPU revision that uses Marvell 88E6361 switch onboard.
We can rely on detecting the switch to enable and fixup the Linux DTS
so a single DTS can be used.
There is currently no support for the 88E6361 switch and thus no working
networking in U-Boot, so we disable both ports.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Reviewed-by: Stefan Roese <sr@denx.de>
Currently, Esspresobin switch is being setup directly in last_stage_init()
which makes it hard to add support for any other board to be setup.
So, lets just move the switch setup code to a separate function and call it
if compatible matches, there should be no functional change.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Reviewed-by: Stefan Roese <sr@denx.de>
Currently, Esspresobin FDT is being fixed up directly in ft_board_setup()
which makes it hard to add support for any other board to be fixed up.
So, lets just move the FDT fixup code to a separate function and call it
if compatible matches, there should be no functional change.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Reviewed-by: Stefan Roese <sr@denx.de>
zynqmp-power node is going to be renamed to power-management which should
be generic enough. New name came from dt-binding review that's why there is
no way around. Add support new name but also at the same time check old
name just in case older dt binding is used.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/967aa76f9f72604c874b580476aa85f5260ccd65.1704448544.git.michal.simek@amd.com
i2c1 is having all chips on it that's why use it instead of 0.
You can see this error when you boot system.
eth0: ethernet@ff0c0000
Setting bus to 0
Failure changing bus number (-19)
Enable permission for node ID 33
Enable permission for node ID 47
Hit any key to stop autoboot: 0
It also get USB to work.
Fixes: dd4a822016 ("arm64: zynqmp: Introduce kria SOM defconfig")
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/cf07682a611de9895271d629ee00fb2809d99d0e.1702904913.git.michal.simek@amd.com
Add support for the Variscite VAR-SOM-IMX93 evaluation kit. The SoM
consists of an NXP iMX93 dual A55 CPU. The SoM is mounted on a Variscite
Symphony SBC.
Signed-off-by: Mathieu Othacehe <m.othacehe@gmail.com>
Implement fdtdec_board_setup() auto-detection of ethernet PHY.
This uses properties of the hardware and pull resistor placement.
If GPIO1_16 RGMII_MDC is HIGH, then R530 (MX8MM eDM SBC) or
R390 (MX8MP eDM SBC) is populated. R530 or R390 is populated
only on boards with AR8031 PHY.
If GPIO1_16 RGMII_MDC is LOW, then the in-SoM pull down is the
dominant pull resistor. This is the case on boards with BCM54213PE
PHY.
In case AR8031 PHY is populated, the PHY MDIO address is 0, in
case BCM54213PE PHY is populated, the PHY MDIO address is 1, the
fdtdec_board_setup() is used to patch the correct address into
the U-Boot control DT.
Enable broadcom PHY support to support both PHYs.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Enable the QEMU firmware interface if ACPI tables are to be supported on
the QEMU platform.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Provide a configuration fragment to enable ACPI on QEMU.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Enable the QEMU firmware interface if ACPI tables are to be supported on
the QEMU platform.
Enable the QFW MMIO interface if the QEMU firmware interface is enabled.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Documentation updates for endeavoru, lg_x3, grouper and transformers,
addition of MIPI calibration clock name for T114 (inline with T124+),
conversion of TEGRA_SUPPORT_NON_SECURE into Kconfig and endeavoru
stability improvements.
Unlike all other supported Tegra devices and most known Tegra devices, the
HTC One X has no hardware way to enter APX/RCM mode, which may lead to a
dangerous situation when, if BCT is set correctly and the bootloader is
faulty, the device will hang in a permanent brick state. Exiting from this
state can be done only by disassembling the device and shortening the
testpad to the ground.
To prevent this or to minimize the probability of such an accident, it was
proposed to add the RCM rebooting hook as early into SPL as possible since
SPL is much more robust and has minimal changes that can break bootflow.
gpio_early_init_uart() function was chosen as it is the earliest function
exposed for setup by the device. Hook performs a check for volume up button
state and triggers RCM if it is pressed.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Detect CPU name through marchid and then save it to env.
Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Kconfig provides SYS_[I|D]CACHE_OFF config options to switch off caches.
Provide the corresponding implementation to the options.
Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
variable was indented as part of the value of the previous variable.
Signed-off-by: Tomas Alvarez Vanoli <tomas.alvarez-vanoli@hitachienergy.com>
Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>
In most cases, the architecture global data currently makes use of
assorted linux types, but does not include <linux/types.h> to provide
them. Add <linux/types.h> instead of relying on indirect inclusion.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
These files include <common.h> twice. Start by removing the second
inclusion of the file.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
In order to make it easier to move on to dropping common.h from code
directly, remove common.h inclusion from the rest of the header file
which had been including it.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove and replace common.h and config.h in sandbox when it's not needed
and add some explicit includes where needed.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
We need to include <config.h> directly when a file needs to have
something such as CFG_SYS_SDRAM_SIZE referenced as this file is not
automatically globally included and is most commonly indirectly included
via common.h. Remove most cases of arm including config.h directly, but
add it where needed. This includes a few board-specific fixes.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
We need to include <config.h> directly when a file needs to have
something such as CFG_SYS_SDRAM_SIZE referenced as this file is not
automatically globally included and is most commonly indirectly included
via common.h. Remove most cases of arc including config.h directly, but
add it where needed. Further clean up the tb100 board config.h file so
that we don't rely on config.h being included there for a value used in
a single place.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
When som_type does not match any case, it is uninitialized and the
function still tries to print the SoM info. Rather, this is an error
condition and the function should abort prematurely. Highlight this by
printing an error message and returning early.
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Move all function definitions in {phytec|imx8m}_som_detection from the
header to the source file to prevent potential linker error regarding
multiple definitions. Also move the #if blocks with the definitions.
Signed-off-by: Yannic Moog <y.moog@phytec.de>
In phytec_eeprom_data_init, after reading eeprom data into buffer, it is
checked whether all bytes are 0x0 by iterating over chunks of the
buffer. The offset, or index of the chunk, was never changed, leading to
repeated comparison of only the first chunk. Use array notation and
access chunk via array index to compare all chunks of the buffer.
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Pointer in phytec_imx8m_detect was accessed without checking it first.
Fix this by moving the pointer check in front of any accesses.
Signed-off-by: Yannic Moog <y.moog@phytec.de>
phytec_imx8m_detect returns -1 on error, but the return type is u8
leading to 255 return values. Fix this by changing the return type to
int; there is no reason to keep it as u8 .
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Since implementation of pinctrl driver for T20 Paz00 can switch
to device tree pinmux setup along with remove of board pinmux
and some minor device tree and defconfig tweaks.
Tested-by: Agneli <poczt@protonmail.ch> # Toshiba AC100 T20
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Drop the pinmux setup in the board in favor of setting it up in
the device tree. Device tree nodes match nodes used for the Linux
device tree and are set according to the downstream kernel.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Drop the pinmux setup in the board in favor of setting it up in
the device tree. Device tree nodes match nodes used in the Linux
device tree.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Drop the pinmux setup in the board in favor of setting it up in
the device tree. Device tree nodes match nodes used for the Linux
device tree and are set according to the service manual.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Drop the pinmux setup in the board in favor of setting it up in
the device tree. Device tree nodes match nodes used in the Linux
device tree.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Julien Masson <jmasson@baylibre.com> says:
This patch series add the support for the MediaTek MT8365 EVK Board [1].
Most of the code have been copied/adapted from Linux tag v6.7-rc2.
For now we only enable/test these features:
Boot, UART, Watchdog and MMC.
[trini: This includes two clocks not listed in the Linux binding, which
needs resyncing later]
This adds support for the MT8365 EVK board with the following
features enabled/tested: Boot, UART, Watchdog and MMC.
Signed-off-by: Julien Masson <jmasson@baylibre.com>
Migrate to the new environment format and drop most of the config.h.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
MicroBlaze V is new AMD/Xilinx soft-core 32bit RISC-V processor IP.
It is hardware compatible with classic MicroBlaze processor.
The patch contains initial wiring and configuration for initial HW design
with memory, cpu, interrupt controller, timers and uartlite console
(interrupt controller is listed but U-Boot is not using it).
Provided DT is just describing one configuration and should be taken only
as example.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Padmarao Begari <padmarao.begari@microchip.com>
Import DRAM timings generated by the DDR tool 3.31 which introduce assorted
tweaks to the DRAM controller settings. Furthermore, enable DBI to improve
noise resilience of the DRAM bus by reducing the number of bit changes on
the bus.
Reduce the DRAM rate to 3600 MTps to remove all remaining correctable errors
reported by EDAC . It is not entirely clear why the slightly faster setting
does produce sporadic correctable errors, while this one does not, but this
could be related to simpler PLL setting at 3600 MTps.
Enable inline ECC which is necessary to detect ECC errors and collect
statistics by the EDAC driver in Linux. This reduces the DRAM size by
64 MiB for each 512 MiB of DRAM, so for a 4 GiB device the available
DRAM size becomes 3.5 GiB and for 2 GiB device the available DRAM size
becomes 1.8 GiB.
Signed-off-by: Marek Vasut <marex@denx.de>
In case the Buck5 and Buck6 regulators which supply DRAM Vdd1 and Vdd2/Vddq
respectively operate in automatic PWM/PFM mode, the DRAM EDAC detects more
correctable errors than if the regulators operate in forced PWM only mode.
Force DRAM regulators to forced PWM mode only to stop tempting the DRAM.
Signed-off-by: Marek Vasut <marex@denx.de>
After talking with the author off-list I was reminded that this part of
the series was not supposed to be merged, only parts 1-3 upon further
review.
This reverts commit 58a277c207.
Signed-off-by: Tom Rini <trini@konsulko.com>
The base address of extended DDR does not change across the K3 family.
Setting this per SoC is not needed. Remove this definition to help
remove the last bits from K3 include/configs/*.h files.
Signed-off-by: Andrew Davis <afd@ti.com>
Updates as a result of TIFS core now reserving a virtual interrupt
for enabling interrupts between DM to TIFS core. Because of this
change other virtual interrupt counts decrease by one.
Signed-off-by: Vishal Mahaveer <vishalm@ti.com>
Share the MCU GPIO interrupts between A53 core and DM R5 core. Allocating
2 instances each to A53 and DM R5.
Signed-off-by: Vishal Mahaveer <vishalm@ti.com>
Update am62ax rm-cfg with allocation entries for C7x core. Following
updates are added for C7x:
- Share split BCDMA tx and rx channels between DM R5 and C7x
- Share rings for split BCDMA tx and rx channels between DM R5 and C7x
- Add Global events and Virtual interrupts for C7x
Signed-off-by: Vishal Mahaveer <vishalm@ti.com>
This file is common for all K3, move it out of board/ directory and
into mach-k3. As we need to change the path in k3-binman.dtsi let's
take this opportunity to switch to absolute paths which makes adding
non-TI boards (like Toradex Verdin) not need to override these paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Simplify the way all MTD devices are parsed.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Since MTD devices are partioned, we got the following
error when command "dfu 0" is executed:
DFU alt info setting: done
ERROR: Too many arguments for nor0
ERROR: DFU entities configuration failed!
ERROR: (partition table does not match dfu_alt_info?)
Fixes: 31325e1b8b ("stm32mp1: dynamically build DFU_ALT_INFO")
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
The DRAM configuration for the 1GB and 4GB imx8mp venice boards had a
bus mapping issue (channel A and B swapped) which creates an invalid
deskewing configuration during training causing the DRAM to not be able
to run at its full bus speed.
Update the various config structures to resolve this.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Import DRAM timings generated by the DDR tool 3.31 which introduce assorted
tweaks to the DRAM controller settings. Furthermore, enable DBI to improve
noise resilience of the DRAM bus by reducing the number of bit changes on
the bus.
Reduce the DRAM rate to 3600 MTps to remove all remaining correctable errors
reported by EDAC . It is not entirely clear why the slightly faster setting
does produce sporadic correctable errors, while this one does not, but this
could be related to simpler PLL setting at 3600 MTps.
Enable inline ECC which is necessary to detect ECC errors and collect
statistics by the EDAC driver in Linux. This reduces the DRAM size by
64 MiB for each 512 MiB of DRAM, so for a 4 GiB device the available
DRAM size becomes 3.5 GiB .
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
In case the Buck5 and Buck6 regulators which supply DRAM Vdd1 and Vdd2/Vddq
respectively operate in automatic PWM/PFM mode, the DRAM EDAC detects more
correctable errors than if the regulators operate in forced PWM only mode.
Force DRAM regulators to forced PWM mode only to stop tempting the DRAM.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
- Add TPM support for venice boards
- Add networking support for imx93-evk
- Enable TCP, IPv6, wget for DHCOM and Data Modul boards
- Enable fastboot support for Toradex boards
- Allow pico-imx7d to boot from SD
- Enable fastboot for beacon imx8m beacon boards, disabled
SYS_CONSOLE_IS_IN_ENV
- Fix mxsboot to prevent NAND blocks being reported as bad
- Add imx8mm PWM clock support
- Several devicetree syncs with the kernel
- Add support for i.MX8MP Polyhex Debix Model A SBC
- Reworked ddr_load_train_firmware() to get a 50ms boot time improvement
Technexion PICO-IMX7 SoM is supporting USDHC3 (eMMC or micro SD on SoM)
and USDHC1 (SD on carrier board) to use on any carrier board like
PICO-NYMPH. Based on the U-Boot version from Technexion it adds
baseboard SD card boot detect to able to boot from selected USDHC1
or USDHC3 boot devices.
Signed-off-by: Benjamin Szőke <egyszeregy@freemail.hu>
Tested-by: Fabio Estevam <festevam@gmail.com>
To quote the author:
It would be useful to be able to boot an OS when CONFIG_CMDLINE is
disabled. This could allow reduced code size.
Standard boot provides a way to handle programmatic boot, without
scripts, so such a feature is possible. The main impediment is the
inability to use the booting features of U-Boot without a command line.
So the solution is to avoid passing command arguments and the like to
code in boot/
A similar process has taken place with filesystems, for example, where
we have (somewhat) separate Kconfig options for the filesystem commands
and the filesystems themselves.
This series starts the process of refactoring the bootm logic so that
it can be called from standard boot without using the command line.
Mostly it removes the use of argc, argv and cmdtbl from the internal
logic.
Some limited tidy-up is included, but this is kept to smaller patches,
rather than trying to remove all #ifdefs etc. Some function comments
are added, however.
A simple programmatic boot is provided as a starting point.
This work will likely take many series, so this is just the start.
Size growth with this series for firefly-rk3288 (Thumb2) is:
arm: (for 1/1 boards) all +23.0 rodata -49.0 text +72.0
This should be removed by:
https://source.denx.de/u-boot/custodians/u-boot-dm/-/issues/11
but it is not included in this series as it is already large enough.
No functional change is intended in this series.
Changes in v3:
- Add a panic if programmatic boot fails
- Drop RFC tag
Changes in v2:
- Add new patch to adjust position of unmap_sysmem() in boot_get_kernel()
- Add new patch to obtain command arguments
- Fix 'boot_find_os' typo
- Pass in the command name
- Use the command table to provide the command name, instead of "bootm"
The U_BOOT_CMD_COMPLETE() macro has a semicolon at the end, perhaps
inadvertently. Some code has taken advantage of this.
Tidy this up by dropping the semicolon from the macro and adding it to
macro invocations as required.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Remove Akash Gajjar <akash@openedev.com> from
MAINTAINERS as email is bouncing.
Signed-off-by: Shantur Rathore <i@shantur.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
This commit adds support for Fastboot boot commands by checking both
CONFIG_CMD_USB_SDP and CONFIG_USB_FUNCTION_FASTBOOT. If either of these
configurations is set, it indicates that the board is in recovery mode
and can use either SDP or Fastboot.
The default option remains the SDP command, but if
CONFIG_CMD_FASTBOOT is set, it changes to 'fastboot usb 0' as
the boot command.
Signed-off-by: Hiago De Franco <hiago.franco@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
With Ethernet DM in place, there is no longer the need for having
the board_phy_config() anymore.
Remove it.
Tested on imx7d-pico-pi board:
=> setenv autoload no
=> dhcp
BOOTP broadcast 1
*** Unhandled DHCP Option in OFFER/ACK: 42
DHCP client bound to address 192.168.0.138 (138 ms)
=> tftp zImage
Using ethernet@30be0000 device
TFTP from server 192.168.0.16; our IP address is 192.168.0.138
Filename 'zImage'.
Load address: 0x80800000
Loading: #################################################################
....
#################################################################
##########
4.3 MiB/s
done
Bytes transferred = 9034120 (89d988 hex)
Signed-off-by: Fabio Estevam <festevam@denx.de>
In order to use the generic "distro boot" using an extlinux.conf file,
the `fdtfile` environment variable is mandatory. This commit ensure this
variable is properly constructed based on the detected board revision.
Signed-off-by: Arnaud Ferraris <arnaud.ferraris@collabora.com>
The address ariel.dalessandro@collabora.com is no longer working:
A message that you sent could not be delivered to one or more of its
recipients. This is a permanent error. The following address(es) failed:
ariel.dalessandro@collabora.com
host mx.collabora.co.uk [46.235.227.165]
SMTP error from remote mail server after RCPT TO:<ariel.dalessandro@collabora.com>:
550 5.1.1 <ariel.dalessandro@collabora.com>: Recipient address rejected:
undeliverable address: host mail.collabora.co.uk[46.235.227.172] said:
550 5.1.1 <ariel.dalessandro@collabora.com>: Recipient address rejected:
User unknown in local recipient table (in reply to RCPT TO command)
Remove this address from MAINTAINERS.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
With DM enabled, there is no need for board code to initialize
the FEC interface.
The ethernet PHYs on the symphony carrier board have a dedicated
crystal/oscillator. If the SOM has the EC configuration option
(onboard ethernet PHY), it also has a dedicated crystal/oscillator.
So in all cases, there is no need to enable the RGMII TX clk output.
This follows a similar change introduced by Fabio Estevam:
Link: https://lore.kernel.org/u-boot/20231019170441.1610453-1-festevam@gmail.com/
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
I would like to help maintaining the imx8mn_var_som symphony board.
Add myself to MAINTAINERS.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
