Commit graph

9662 commits

Author SHA1 Message Date
Simon Glass
04ecda0e1d x86: coreboot: Enable standard boot
Enable bootstd options and provide instructions on how to boot a linux
distro using coreboot.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-09-22 06:03:46 +08:00
Simon Glass
350c0df30d x86: coreboot: Add IDE and SATA
Add these options to permit access to more disk types.

Add some documentation as well.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-09-22 06:03:46 +08:00
Simon Glass
9d69324e7f x86: samus_tpl: Correct text base and alloc sizes
Make sure that CONFIG_X86_OFFSET_U_BOOT is the same as CONFIG_TEXT_BASE
as it is changing CONFIG_X86_OFFSET_U_BOOT

Samus boots into U-Boot proper in flash, not RAM. Also expand the SPL
malloc() size a little, to avoid an error.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-09-22 06:03:46 +08:00
Thomas Mittelstaedt
fde0df92b5 x86: efi-payload64: Add bootstd support
Enable bootstd support for U-Boot at VirtualBox described at
https://source.denx.de/u-boot/u-boot/-/blob/master/doc/develop/bootstd.rst

This is used to boot system images at Virtualbox via
- distroboot (extlinux.conf)
- boot script

Signed-off-by: Thomas Mittelstaedt <thomas.mittelstaedt@bosch.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
[Added 'efi-payload64' tag]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2023-09-22 06:03:46 +08:00
Thomas Mittelstaedt
c323921ba9 x86: efi-payload64: Add support for SCSI devices
U-Boot at VirtualBox must load Linux and boot configuration from disk devices.
Here the discs at AHCI (scsi) bus are used to load the needed boot data.

Signed-off-by: Thomas Mittelstaedt <thomas.mittelstaedt@de.bosch.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
[Added 'efi-payload64' tag and rebased on top of u-boot/master]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2023-09-22 06:03:46 +08:00
Venkatesh Yadav Abbarapu
b764e84f9f zynqmp: config: Add proper dependencies for USB
When CONFIG_CMD_USB and CONFIG_USB are disabled, still some compilation
errors are seen as below.

In file included from include/configs/xilinx_zynqmp.h:173,
                 from include/config.h:3,
                 from include/common.h:16,
                 from env/common.c:10:
include/config_distro_bootcmd.h:302:9: error: expected '}' before 'BOOT_TARGET_DEVICES_references_USB_without_CONFIG_CMD_USB'
  302 |         BOOT_TARGET_DEVICES_references_USB_without_CONFIG_CMD_USB
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/config_distro_bootcmd.h:302:9: note: in definition of macro
'BOOTENV_DEV_NAME_USB'
  302 |         BOOT_TARGET_DEVICES_references_USB_without_CONFIG_CMD_USB
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/configs/xilinx_zynqmp.h:77:41: note: in expansion of macro
'BOOTENV_DEV_NAME'
   77 | # define BOOT_TARGET_DEVICES_USB(func)  func(USB, usb, 0)
   func(USB, usb, 1)
      |                                         ^~~~
include/configs/xilinx_zynqmp.h:168:9: note: in expansion of macro
'BOOT_TARGET_DEVICES_USB'
  168 |         BOOT_TARGET_DEVICES_USB(func) \
      |         ^~~~~~~~~~~~~~~~~~~~~~~
include/config_distro_bootcmd.h:454:25: note: in expansion of macro
'BOOT_TARGET_DEVICES'
  454 |         "boot_targets=" BOOT_TARGET_DEVICES(BOOTENV_DEV_NAME) "\0"
      |                         ^~~~~~~~~~~~~~~~~~~
include/config_distro_bootcmd.h:474:9: note: in expansion of macro
'BOOTENV_BOOT_TARGETS'
  474 |         BOOTENV_BOOT_TARGETS \
      |         ^~~~~~~~~~~~~~~~~~~~
include/configs/xilinx_zynqmp.h:179:9: note: in expansion of macro
'BOOTENV'
  179 |         BOOTENV
      |         ^~~~~~~
include/env_default.h:120:9: note: in expansion of macro
'CFG_EXTRA_ENV_SETTINGS'
  120 |         CFG_EXTRA_ENV_SETTINGS
      |         ^~~~~~~~~~~~~~~~~~~~~~
In file included from env/common.c:32:
include/env_default.h:27:36: note: to match this '{'
   27 | const char default_environment[] = {
      |                                    ^
scripts/Makefile.build:256: recipe for target 'env/common.o' failed
make[1]: *** [env/common.o] Error 1
Makefile:1853: recipe for target 'env' failed
make: *** [env] Error 2
make: *** Waiting for unfinished jobs....

Add CONFIG_USB_STORAGE as dependency for USB related macro's such as
BOOT_TARGET_DEVICES_USB() and DFU_DEFAULT_POLL_TIMEOUT and
CONFIG_THOR_RESET_OFF.

Remove CONFIG_ZYNQMP_USB from Kconfig and also from defconfig since it
is not used anywhere else.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20230904031528.11817-3-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-09-21 13:20:12 +02:00
Michal Simek
9080abfc0b arm64: versal: Do not define boot command for mini configurations
Mini configuration is not design to boot anything that's why there is no
reason to setup boot command. CONFIG_DISTRO_DEFAULTS is disabled anyway.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/41ac52d946ac53d162c407094dc215e6a932af92.1693902205.git.michal.simek@amd.com
2023-09-21 13:20:11 +02:00
Venkatesh Yadav Abbarapu
e5e6b1ed6c arm64: versal-net: Enable the config CMD_KASLRSEED
Kernel Address Space Layout Randomization (KASLR) is a hardening
feature that aims to make it more difficult to take advantage
of known exploits in the kernel, by placing kernel data
structures at a random address at each boot.The bootloader
supports randomizing the virtual address at which the kernel image
is loaded. The bootloader must provide entropy by passing a random
u64 value in the /chosen/kaslr-seed device tree node.
When we run "kaslrseed" command from U-Boot, the bootloader will
genarate the kaslr-seed and update the /chosen/kaslr-seed DT property.

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20230831031658.2203-4-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-09-21 13:20:11 +02:00
Venkatesh Yadav Abbarapu
8ae1fab6b1 arm64: versal-net: Enable sha1sum command
Enable it for TPM usage.

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20230831031658.2203-3-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-09-21 13:20:11 +02:00
Venkatesh Yadav Abbarapu
18a02b881c arm64: versal-net: Enable TPM for xilinx platforms
TPMs are becoming popular that's why enable drivers and command for it.

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20230831031658.2203-2-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-09-21 13:20:11 +02:00
Venkatesh Yadav Abbarapu
c5d15db173 arm64: versal: Enable the config CMD_KASLRSEED
Kernel Address Space Layout Randomization (KASLR) is a hardening
feature that aims to make it more difficult to take advantage
of known exploits in the kernel, by placing kernel data structures
at a random address at each boot.The bootloader supports randomizing
the virtual address at which the kernel image is loaded.
The bootloader must provide entropy by passing a random u64 value
in the /chosen/kaslr-seed device tree node.
When we run "kaslrseed" command from U-Boot, the bootloader will
genarate the kaslr-seed and update the /chosen/kaslr-seed DT property.

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20230831032612.2729-4-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-09-21 13:20:11 +02:00
Venkatesh Yadav Abbarapu
b57fed046e arm64: versal: Enable sha1sum command
Enable it for TPM usage.

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20230831032612.2729-3-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-09-21 13:20:11 +02:00
Venkatesh Yadav Abbarapu
7ad9eb785e arm64: versal: Enable TPM for xilinx platforms
TPMs are becoming popular that's why enable drivers
and command for it.

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20230831032612.2729-2-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-09-21 13:20:11 +02:00
Venkatesh Yadav Abbarapu
4a5c8e8976 arm64: zynqmp: Enable the config CMD_KASLRSEED
Kernel Address Space Layout Randomization (KASLR) is a hardening
feature that aims to make it more difficult to take advantage
of known exploits in the kernel, by placing kernel data structures
at a random address at each boot.The bootloader supports randomizing
the virtual address at which the kernel image is loaded.
The bootloader must provide entropy by passing a random u64 value
in the /chosen/kaslr-seed device tree node.
When we run "kaslrseed" command from U-Boot, the bootloader will
genarate the kaslr-seed and update the /chosen/kaslr-seed DT property.

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20230824032712.13399-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-09-21 13:20:10 +02:00
Venkatesh Yadav Abbarapu
b58ced5277 arm64: versal: Increase the number of DRAM banks to 36
HBM stands for high bandwidth memory and is a type of memory interface used
in 3D-stacked DRAM (dynamic random access memory) in some AMD GPUs (aka
graphics cards), as well as the server, high-performance computing (HPC)
and networking and client space. High Bandwidth Memory(HBM) has total 16
channels, one channel is divided into two pseudo channels which makes its
32 banks each with some amount of memory.
And then we have DDR_LOW PS low, DDR_HIGH0 PS high, DDR_HIGH1 PS very high
and pretty much there should be also place for PL DDR. So maximum number of
memory banks will be 36, updating the CONFIG_NR_DRAM_BANKS to 36.

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/ed9eaf5c20501ee691d7d28a173511cd9a87f161.1690958095.git.michal.simek@amd.com
2023-09-21 13:20:10 +02:00
Shengyu Qu
7d4810cac5 configs: visionfive2: Enable CONFIG_OF_BOARD_SETUP
Enable CONFIG_OF_BOARD_SETUP, so we could use ft_board_setup() to fixup
memory size passed to kernel.

Signed-off-by: Shengyu Qu <wiagn233@outlook.com>
Tested-by: Milan P. Stanić <mps@arvanta.net>
2023-09-20 20:26:23 +08:00
Marek Vasut
075e0b9050 ARM: renesas: Enable DM_ETH_PHY on 64-bit R-Car boards
Enable DM_ETH_PHY to correctly release the PHY on these boards from reset.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-09-17 13:56:34 +02:00
Marek Vasut
ead3a28c14 configs: sandbox: Enable DM_USB_GADGET
Switch sandbox to DM_USB_GADGET, DM is the future.

Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Marek Vasut <marex@denx.de>
2023-09-15 23:38:01 +02:00
Tom Rini
d8d1fd0e89 Merge branch 'next_ufs' of https://source.denx.de/u-boot/custodians/u-boot-sh into next
- UFS support and GPIO clock driver
2023-09-09 10:13:37 -04:00
Marek Vasut
9a059a3af5 ARM: renesas: Enable UFS on R8A779F0 S4 Spider
Enable UFS controller driver and matching UFS and SCSI commands. The
former is used to initialize the device, the later is used to perform
low level access to the SCSI interface of the UFS device.

Enable R8A779F0 S4 Spider specific dependencies, the PCA953x driver
and GPIO clock gate driver. This setup is used to toggle 38.4 MHz
clock for the UFS controller.

Enable support for 48bit LBA in block layer to address disks larger
than 512*2^32 ~= 144 PiB. Enable use of 64bit LBA variables in the
rest of U-Boot, instead of the default 32bit ones.

Increase FAT cluster size to 128k as that is what is used by the
filesystem that is populated on the UFS device.

Use 'ufs init && scsi scan' to start the UFS device from U-Boot prompt.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-09-09 04:53:31 +02:00
Jan Kiszka
17771b3282 configs: am62x_evm_a53_defconfig: Disable semi-functional PSCI reset support
At this point, system shutdown is not supported by the DM firmware
that TF-A calls. As we can't de-select only this feature[1], declare
complete PSCI reset support as non-functional so that we don't signal
incomplete support to the OS via EFI runtime services. This makes
power-off under Linux work again when booting via EFI.

[1] https://uefi.org/specs/UEFI/2.9_A/08_Services_Runtime_Services.html?highlight=efiresetshutdown#resetsystem
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2023-09-08 10:07:12 -04:00
Nishanth Menon
e91134720a configs: am62x_evm*: Enable EMMC_BOOT configuration
Enable EMMC boot support for AM62x evm base configuration.

Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
2023-09-08 10:07:12 -04:00
Nishanth Menon
355c0afcd4 configs: am62x_evm_a53_defconfig: Switch to bootstd
Switch to using bootstd. Note with this change, we will stop using
distro_bootcmd and instead depend entirely on bootflow method of
starting the system up.

Suggested-by: Tom Rini <trini@konsulko.com>
Suggested-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2023-09-08 10:07:11 -04:00
Marek Vasut
e342b91a08 configs: sandbox64: Enable legacy image format support
Align the sandbox64 defconfig with sandbox defconfig. Enable missing
legacy image format support. This fixes ut_bootstd_bootflow_cmd_menu
test.

Suggested-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-09-06 13:51:19 -04:00
Tom Rini
34056394ce Fixes for release
-----------------
 
 - imx9: fix DRAM calculation
 - thermal: fixes
 - fixed for DM, DH and Gateworks boards
 
 CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/17639
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCZPbe+Q8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76bErACfVU0xBJ7rsbqjUHh18Za1tFwmIGEAnRLB5csC
 XsEElHzqrsNBBCLN3ahx
 =GZAw
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20230905' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

Fixes for release
-----------------

- imx9: fix DRAM calculation
- thermal: fixes
- fixed for DM, DH and Gateworks boards

CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/17639
2023-09-05 09:05:16 -04:00
Shengyu Qu
f39e24496a configs: starfive: Disable SYS_MALLOC_CLEAR_ON_INIT by default
SPL_SYS_MALLOC_CLEAR_ON_INIT would enable SYS_MALLOC_CLEAR_ON_INIT by
default, but that's not need on JH7110, so disable that.

Signed-off-by: Shengyu Qu <wiagn233@outlook.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-09-05 10:53:46 +08:00
Shengyu Qu
dccf4a843a configs: starfive: Enable PCIE auto enum and NVME/USB stuff for Starfive Visionfive 2
Although PCIE driver already exists, board defconfig isn't configured to
enable PCIE enum on boot, thus USB storage device and NVME drive are not
supported by default. So modify defconfig to enable PCIE auto enum, then
start USB subsystem and scan nvme drive on boot.

Signed-off-by: Shengyu Qu <wiagn233@outlook.com>
Tested-by: Milan P. Stanić <mps@arvanta.net>
2023-09-05 10:53:41 +08:00
Tom Rini
493fd3363f nokia_rx51: Remove platform
This platform is behind on migrations (it is the sole user of the oldest
legacy version of the USB gadget stack and is long overdue for
migration) and with Pali no longer being a maintainer, we remove this
platform.

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-09-04 21:14:32 -04:00
Fabio Estevam
282ff895c8 imx8mm_evk_defconfig: Select CONFIG_IMX_TMU
Select the i.MX8MM thermal driver as it is useful for displaying
the CPU temperature and its grading:

CPU:   Commercial temperature grade (0C to 95C) at 38C

It also prevents booting when the temperature is above the alert
point.

Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-09-04 17:26:44 +02:00
Tom Rini
ddec4cae62 Prepare v2023.10-rc4
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAmT17FsACgkQFHw5/5Y0
 tywn0gwAlRs5NZ4ierzvDiLQEvYgV6E+lLccwyf8mMfJVHicrrW/ckxqJGS2mrLz
 IoA0pO1oF/HFfR/0pgx9Pb2kuIK1tkCeVNYW6t9EDbEJzrbfdvykBcSB4wgKYpgB
 ZgCga0jsPNM951Y3a3TElNEet4pVTZrDLu0E2UR6zNzr5hpKnfoQTZRfBI1MyCq4
 w4/Eo2wAnnaV1lcobg9LzM6uyDnETxWyTI7DIJYSqkEgT0WcF6zrdW55MaXtrPo5
 RZ4q5MTJQwqnTV5awsmgEt8PSC+XQcPHMPrVCwoOZAdru+5zO3AWpbqq1q6K+y9U
 FEsaJ6HGn5BdITgmIK/lb8oTekfOkDPFF3WuFp5bZ6L0A63ANu/MMWHELyyt5+0z
 TlnU94PVxiLnPMzZtfBPWRQ3jIU5qltJaoW0pKwsoa7P8iUd1WZgYyN+G9WPgwFr
 XUemGRNkgnWfRoxcKGbaYDSB0Llp6m/zqPlGfhlt0ZKXc6igLu3/egRh7/8zLR0i
 y9uBKG45
 =s9vZ
 -----END PGP SIGNATURE-----

Merge tag 'v2023.10-rc4' into next

Prepare v2023.10-rc4
2023-09-04 10:51:58 -04:00
Marek Vasut
2629b18ed4 ARM: imx: Use default SAVED_DRAM_TIMING_BASE on Data Modul i.MX8M Plus eDM SBC
Use default SAVED_DRAM_TIMING_BASE as that is what upstream TFA expects.
Without this change, the board will fail to suspend/resume e.g. in Linux.

Signed-off-by: Marek Vasut <marex@denx.de>
2023-09-04 10:21:20 +02:00
Marek Vasut
7e4e4ff6ec ARM: imx: Use default SAVED_DRAM_TIMING_BASE on Data Modul i.MX8M Mini eDM SBC
Use default SAVED_DRAM_TIMING_BASE as that is what upstream TFA expects.
Without this change, the board will fail to suspend/resume e.g. in Linux.

Signed-off-by: Marek Vasut <marex@denx.de>
2023-09-04 10:21:20 +02:00
Marek Vasut
bd7606d142 ARM: imx: Use default SAVED_DRAM_TIMING_BASE on DH i.MX8M Plus DHCOM
Use default SAVED_DRAM_TIMING_BASE as that is what upstream TFA expects.
Without this change, the board will fail to suspend/resume e.g. in Linux.

Signed-off-by: Marek Vasut <marex@denx.de>
2023-09-04 10:21:20 +02:00
Tim Harvey
99eb21cfcc board: gateworks: venice: fix gw7904
Add missing imx8mm-venice-gw7904 to CONFIG_OF_LIST

Fixes commit 61e7f97325 ("board: gateworks: venice: add imx8mm-gw7904 support")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2023-09-04 10:21:20 +02:00
Marek Vasut
f58b0c8534 ARM: imx: Select 2 DRAM banks on Data Modul i.MX8M Mini eDM SBC
U-Boot splits DRAM bank spanning addresses below and above the 32bit
boundary into two DRAM banks. Since this platform may come with 4GiB
of DRAM, increase the DRAM bank count to 2.

Signed-off-by: Marek Vasut <marex@denx.de>
2023-09-04 10:21:20 +02:00
Marek Vasut
e47cab0fa1 ARM: imx: Drop CONFIG_USE_BOOTCOMMAND=n on i.MX6 DHSOM
This board certainly does use default 'run distro_bootcmd' boot command,
make sure this is set in 'bootcmd' variable.

Fixes: 970bf8603b ("Convert CONFIG_USE_BOOTCOMMAND et al to Kconfig")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
2023-09-04 10:21:20 +02:00
Simon Glass
90f626a5d8 rpi: Disable DISTRO_DEFAULTS
Disable this option to reclaim some space, since bootstd requires less
functionality to operate (e.g. hush parser).

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-09-03 23:20:59 +01:00
Simon Glass
c771e5b8c2 arm: rpi: Switch to standard boot
Drop use of the distro scripts and use standard boot instead.

We don't need to specify the mmc devices individually, since they are
used in order from 0 to 2, and standard boot uses that order anyway.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-09-03 23:20:59 +01:00
Simon Glass
91caa3bb89 event: Use an event to replace last_stage_init()
Add a new event which handles this function. Convert existing use of
the function to use the new event instead.

Make sure that EVENT is enabled by affected boards, by selecting it from
the LAST_STAGE_INIT option. For x86, enable it by default since all boards
need it.

For controlcenterdc, inline the get_tpm() function and make sure the event
is not built in SPL.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-08-31 13:16:55 -04:00
Marek Vasut
77050a7398 configs: sandbox: Enable NVMXIP QSPI driver
Enable NVMXIP QSPI driver on sandbox, since it is already enabled
on sandbox64.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-08-30 17:56:21 -04:00
Tom Rini
c37be6a39a First set of u-boot-at91 features for the 2023.10 cycle
-----BEGIN PGP SIGNATURE-----
 
 iQFQBAABCgA6FiEEqxhEmNJ6d7ZdeFLIHrMeAg6sL8gFAmTu+QMcHGV1Z2VuLmhy
 aXN0ZXZAY29sbGFib3JhLmNvbQAKCRAesx4CDqwvyFqVB/9z5lV4zhqWYiQ+wNZL
 Gxs3//DSS5iVHU+xaPRrYQT99Yn2/kfM2LeQ4REBOaOTP7IX2ewmOEro4OUViFuC
 kt/WnHD0XzN+2o8akIdVC5YudgVcuX751SQtp5dqcbN6FylSH010+YIZTvaJoNQn
 +Wny1ZZhpuNJJEPvLxE/eiJ3jFwvEAjC+jH328uQIeSLknPh93hGJOFc/02F0O2o
 s96J1/VZ4qvvQKYw0sgNtGb/0Og7V0RLW27+RfwhH4XJvAIv/A6MioTyRaCS2h7H
 tzj/hFXbzGtu+AqrEtMgNjzC7vAx+0266P/Zx/DOWKoWLDIYkWSLpYKLut0E6CUe
 +fcB
 =L/iw
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-at91-2023.10-a' of https://source.denx.de/u-boot/custodians/u-boot-at91 into next

First set of u-boot-at91 features for the 2023.10 cycle:

This feature set includes a new board sama5d29 Curiosity, and various
fixes and alignments for sam9x60 and sam9x60 curiosity board.
2023-08-30 09:32:10 -04:00
Sughosh Ganu
0ef2875cf2 sandbox: capsule: Add path to the public key ESL file
Add the path to the public key EFI Signature List(ESL) file for the
sandbox variants which enable capsule authentication. This ESL file
gets embedded into the platform's device-tree as part of the build.

Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
2023-08-29 13:38:56 -04:00
Sughosh Ganu
14a0e7c0fa sandbox: capsule: Enable EFI capsule module on sandbox variants
Enable the EFI capsule update code on all sandbox variants. This was
already enabled on the sandbox, sandbox64 and sandbox_flattree
variants. The rest of the variants also have the EFI capsule update
module  enabled now. With this commit, the mkeficapsule tool also gets
enabled on all variants.

Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-08-29 13:37:54 -04:00
Alexander Dahl
e1ee52ca56 configs: at91: sam9x60: Switch to new reset driver
Since commit 61040097a9 ("reset: at91: Add reset driver for basic
assert/deassert operations") the compatible "microchip,sam9x60-rstc" for
the sam9x60 reset controller in sam9x60.dtsi is not handled by
CONFIG_SYSRESET_AT91 anymore, but by CONFIG_RESET_AT91 now.  This
resulted in the following error message, when trying to reset from
U-Boot shell:

    U-Boot> reset
    resetting ...
    System reset not supported on this platform
    ### ERROR ### Please RESET the board ###

Fixed by enabling the new driver in the relevant defconfigs.  Tested on
sam9x60-curiosity board.  Defconfigs for sam9x60ek adapted in the same
way, but without testing.  These should be all sam9x60 boards affected
in U-Boot here.

Signed-off-by: Alexander Dahl <ada@thorsis.com>
2023-08-29 17:39:01 +03:00
Alexander Dahl
deacc65152 configs: at91: sam9x60_curiosity: Sync both defconfig variants
The board has two SD card slots and we have two defconfigs for booting
from either the first (micro SD) named 'sam9x60_curiosity_mmc_defconfig'
or the second (full size SD) named 'sam9x60_curiosity_mmc1_defconfig'.
For comparable Microchip boards (sama5d27-som1-ek, sama5d29-curiosity,
sama7g5ek) with two card slots the defconfigs only differ in BOOTARGS,
BOOTCOMMAND, and ENV_FAT_DEVICE_AND_PART and the same should be the case
for sam9x60_curiosity.

Here the 'mmc1' config has more options enabled to support the raw NAND
flash populated on the board, so the 'mmc' config (for mmc0) was adapted
by enabling additional options, instead of removing options from mmc1.

The 'mem=128M' argument can be dropped from kernel command line, because
it is redundant to memory node in dts in both Linux and U-Boot:

        memory@20000000 {
                reg = <0x20000000 0x8000000>;
        };

Signed-off-by: Alexander Dahl <ada@thorsis.com>
2023-08-29 17:39:01 +03:00
Daniel Golle
dcde1f95bf configs: set CONFIG_LMB_MAX_REGIONS=64 for MT7988 boards
Similar to MT7981 and MT7986 also MT7988 can have a high number of
reserved-memory regions used by the various hardware offloading
subsystems.

Raise CONFIG_LMB_MAX_REGIONS to 64 to avoid errors when trying to boot
Linux with more then 6 reserved regions:

ERROR: reserving fdt memory region failed (addr=4f700000 size=240000 flags=4)
ERROR: reserving fdt memory region failed (addr=15194000 size=1000 flags=4)
ERROR: reserving fdt memory region failed (addr=15294000 size=1000 flags=4)
ERROR: reserving fdt memory region failed (addr=15394000 size=1000 flags=4)
ERROR: Failed to allocate 0xb161 bytes below 0x80000000.
device tree - allocation error

Fixes: bc4adc97cf ("board: mediatek: add MT7988 reference boards")
Reported-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2023-08-28 15:59:22 -04:00
Andrew Davis
b982a850d0 configs: Enable CONFIG_DM_SCSI in am57xx_hs_evm_usb
This should have already been enabled but was missed when converting the
base platform defconfig, fix this here.

Fixes: 3c5aa6cacc ("configs: Enable CONFIG_BLK in am57xx_evm and am57xx_hs_evm")
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-08-28 15:59:22 -04:00
Simon Glass
d08db02d2d bootstd: Add a test for bootmeth_cros
The ChromiumOS bootmeth has no tests at present. Before adding more
features. add a basic test.

This creates a disk which can be scanned by the bootmeth, so make sure
things work. It is quite rudimentary, since the kernel is faked, the root
disk is missing and there is no cmdline stored.

Enable the bootmeth for snow so it can build the unit test.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-08-25 17:55:19 -04:00
Alper Nebi Yasak
05e2fa7931 arm: qemu: Enable usb keyboard as an input device
Commit 02be57caf7 ("riscv: qemu: Enable usb keyboard as an input
device") adds PCI xHCI support to QEMU RISC-V virtual machines and
enables using a USB keyboard as one of the input devices. Similarly,
enable those for ARM virtual machines as well.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
2023-08-24 16:47:25 -04:00
Tom Rini
7e6e40c572 Prepare v2023.10-rc3
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAmTjxwsACgkQFHw5/5Y0
 tyz4TAwAtVgllQGPVNIVDaEBdG93htm1DoZPc4EMZ4L5rf0nT0yJPeOhRCGygYY+
 zYL1ueleBZtpJhYOuHGetSns0B/M5Wx7gu1eGHNGrMNHH7zCV5Ynjjee2IaqKgbU
 tdSSc8XQpJ3PJY6rhJ6qZ7pO/EcUlQEdqplEUGFmA4JObx43j1+bmqyGTJA57vEw
 rrr+tyUVlr+Wv4lqlX/YJWzAB6IoSMUStv34M2lmiZvZoTYHezvIqBK33GrQ4Cwl
 hQ8nP7ymBXdA5GoMFBpfaBCA7aX3esx4yYN3JIRNRjNmnITJHYs0G8oIh8R5iNnJ
 psroU7GRPu3MmXfOnHlRfA/v0mo8xQGc2RQHyZUGXuApTI8+SFK/4WJPBny/IYse
 ggcVCHoI57dx1+j4+JHYhh61bMR1JUwARs4/UU4dKT3MRZM8Gb99OvbXO3+switZ
 R0YHSnDP///MTC7/MzbOPWzsJiTn9gkZd8nFVTXoncrVI8F3OtCc89G4HBruBSj7
 ptfylxqH
 =VlzD
 -----END PGP SIGNATURE-----

Merge tag 'v2023.10-rc3' into next

Prepare v2023.10-rc3

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-08-21 17:32:17 -04:00
Marek Vasut
ddfda552e7 configs: sandbox64: Enable PCI register multi-entry support
Align the sandbox64 defconfig with sandbox defconfig. Enable missing
PCI register multi-entry support. This fixes ut_dm_dm_test_pci_bus_to_phys
test .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-08-20 15:55:27 -06:00
Marek Vasut
eaa5b5d7d2 configs: sandbox64: Enable clock CCF driver
Align the sandbox64 defconfig with sandbox defconfig. Enable missing
CCF and Sandbox CCF drivers. This fixes ut_dm_dm_test_clk_ccf test .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-08-20 15:55:27 -06:00
Marek Vasut
5d5d7e225d configs: sandbox64: Enable video 12x22 font support
Align the sandbox64 defconfig with sandbox defconfig. Enable missing
12x22 font support. This fixes ut_dm_dm_test_video_text_12x22 test .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-08-20 15:55:27 -06:00
Marek Vasut
539485fd9e configs: sandbox64: Enable video 16bpp and 24bpp support
Align the sandbox64 defconfig with sandbox defconfig. Enable missing
16bpp and 24bpp video support. This fixes ut_dm_dm_test_video_bmp16
and ut_dm_dm_test_video_bmp24 tests .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-08-20 15:55:27 -06:00
Marek Vasut
d54c44b474 configs: sandbox64: Enable PINCTRL_SINGLE driver
Align the sandbox64 defconfig with sandbox defconfig. Enable missing
PINCTRL single driver. This fixes ut_dm_dm_test_pinctrl_single test .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-08-20 15:55:27 -06:00
Marek Vasut
09c0b2e712 configs: sandbox64: Enable BUTTON_ADC driver
Align the sandbox64 defconfig with sandbox defconfig. Enable missing
BUTTON ADC driver. This fixes ut_dm_dm_test_button_keys_adc test .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-08-20 15:55:27 -06:00
Marek Vasut
226ddc0dcc configs: sandbox64: Enable MC34708 driver
Align the sandbox64 defconfig with sandbox defconfig. Enable missing
MC34708 PMIC driver. This fixes ut_dm_dm_test_power_pmic_mc34708_get test .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-08-20 15:55:27 -06:00
Marek Vasut
49147a0b0d configs: sandbox64: Increase console record size to 0x6000
Align the sandbox64 defconfig with sandbox defconfig. Increase the
console record size. This fixes ut_bootstd_bootflow_cmd_scan_e .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-08-20 15:55:27 -06:00
Marek Vasut
ff547a6bc2 configs: sandbox64: Enable SF bootdev
Align the sandbox64 defconfig with sandbox defconfig. Enable missing
SPI NOT bootdev. This fixes ut_bootstd_bootdev_test_cmd_hunt test .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-08-20 15:55:26 -06:00
Jonas Karlman
e34efcf51d rockchip: rk3566-anbernic-rgxx3: Rename defconfig to include SoC name
Rename defconfig to include SoC name, use similar pattern as other
RK356x boards: <soc>-<name>.dts -> <name>-<soc>_defconfig

Suggested-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-08-18 10:25:03 -04:00
Tom Rini
2d8e7ac320 ARM: tegra: Changes for v2023.10-rc1
This adds support for various new Tegra30 boards (ASUS, LG and HTC) and
 has some other minor enhancements, such as enabling the poweroff command
 on several Tegra210 and Tegra186 boards.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAmTfWrITHHRyZWRpbmdA
 bnZpZGlhLmNvbQAKCRDdI6zXfz6zoYPFD/9hw40HjaAXf6cD960HWSlcGuNOIV99
 A9JoSgHipCuhACr0z7s4MpbATjEgknZUblJNiVdhzCWAgW3Spy9JpSxMyKlpqdiH
 7Z971DuaXFX9ZCilX9g6whZI/RDglpUEjt3cb4PWrznM6dpKA73voizo+czBeXd7
 AhxTN/2I89VLz75RyR+X41bLLK1VuGND+uGHz/DDbpMXEW8gVRtZ8gnJPeR4zg1y
 EUacNFc+PVjghMFZGmClnw0pXkq2akKp5cJ/A+11aa/Q7FII63v5/Np79kDtnUje
 GPSdg4yqSr1ZE/6qK0qV58B2KKHfeg+6GC47s46KjzaUwL4De64zHtCt6t37zz8y
 hngeeR5SYIKR8HkpXKM8DsMv0D1WciP2awggFPaPF802H/5GMVCnEFITmuFlOuAe
 Q1lg2acywMo2NFINMOONuQahGIJZORpm2VMonMhlesyAuc89quslt/iYSAoV9E4/
 Pt1AqgeOpUh5I236EygJJ11V2BAXkwzR6RazFDr3AHCqB9iFW/UNS1Y7A1pXwKYN
 IVUWU8xkuYYSyxeGwuIrTj/JdQhwfO0jn+xn5g+rUPWNP5n4FJ2oBVPOInfEpled
 k0HgxcGK6Z0hBCwd6/t03QQJWD47/r5jAd9x1eLRFWYV8ivl2Acvm+MlkPx81weG
 E1h7UKdfvTZcDw==
 =Bzgn
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-2023.10-rc1' of https://source.denx.de/u-boot/custodians/u-boot-tegra

ARM: tegra: Changes for v2023.10-rc1

This adds support for various new Tegra30 boards (ASUS, LG and HTC) and
has some other minor enhancements, such as enabling the poweroff command
on several Tegra210 and Tegra186 boards.
2023-08-18 10:05:04 -04:00
Patrick Delaunay
284b08fb51 board: stm32mp1: add splash screen with stmicroelectronics logo
Display the STMicroelectronics logo with features VIDEO_LOGO and
SPLASH_SCREEN on STMicroelectronics boards.

With CONFIG_SYS_VENDOR = "st", the logo st.bmp is selected, loaded at the
address indicated by splashimage and centered with "splashpos=m,m".

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-08-16 15:35:55 +02:00
Siddharth Vadapalli
9a07d2df76 configs: j7200_evm_a72: Enable configs for SGMII support with MAIN CPSW0
The MAIN CPSW0 instance of CPSW Ethernet Switch on TI's J7200 SoC
supports SGMII mode. To enable support for utilizing the SGMII
daughtercard with TI's DP83869 PHY, enable the corresponding config.

Also, since the SGMII daughtercard is connected to the I2C GPIO
Expander 2 connector on the J7200 EVM, powering on the Ethernet PHY and
resetting it requires GPIO Hogging capability. Enable it as well.

Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
2023-08-15 17:46:39 -04:00
Heinrich Schuchardt
cf159fe0b6 configs: enable SEMIHOSTING on qemu_arm64_defconfig
We need a platform on which we can test our semihosting code.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Sean Anderson <sean.anderson@seco.com>
2023-08-14 17:55:53 -04:00
Sergei Antonov
852467de92 pci: ftpci100: add new driver implementation
Add a new DM driver supporting FTPCI100 IP used in SoC designs.
This implementation is not based on the old non-DM ftpci100 code
dropped from U-Boot.

Enable the driver in sandbox_defconfig to test compilability.

Signed-off-by: Sergei Antonov <saproj@gmail.com>
2023-08-14 17:55:53 -04:00
Mark Kettenis
b99c635787 phy: Add support for the Apple Type-C PHY
This is merely a dummy driver that makes sure the DWC3 XHCI driver
finds its reset and PHY controllers.  We rely on iBoot to set up
the PHY for us.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
2023-08-14 17:51:51 -04:00
Andy Yan
bb38db086c rockchip: rk3568: Add EmbedFire Lubancat 2 support
LubanCat2 is a rk3568 based SBC from EmbedFire.

Specification:
- Rockchip rk3568
- LPDDR4/4X 1/2/4/8 GB
- TF scard slot
- eMMC 8/32/64/128 GB
- Gigabit ethernet x 2
- HDMI out
- USB 2.0 Host x 1
- USB 2.0 Type-C OTG x 1
- USB 3.0 Host x 1
- Mini PCIE interface for WIFI/BT module
- M.2 key for 2280 NVME
- 40 pin header

The dts file is sync from linux mainline.

Signed-off-by: Andy Yan <andyshrk@163.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-08-12 10:17:59 +08:00
Peter Robinson
080030f276 rockchip: dts: rk3328: Add rng details to u-boot.dtsi
Add the rk3328 rng details to the u-boot.dtsi and
enable the RNG on the Rock64 to be able to provide
a random seed via UEFI.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
(Fix typo message)
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2023-08-12 10:13:14 +08:00
Peter Robinson
a13a7a0b45 config: rock64: enable efuse for stable mac addr
Enable the rockchip efuse driver on the Rock64 to
provide a stable ethernet address on the device.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-08-12 10:13:06 +08:00
Shengyu Qu
7d79bed00c configs: starfive: Enable environment in SPI flash support
On Starfive Visionfive 2, the u-boot environment settings are saved to
on-board SPI flash. Enable relative configs by default and set offset
and size according to upstream linux dts.

Signed-off-by: Shengyu Qu <wiagn233@outlook.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-08-10 10:58:07 +08:00
Minda Chen
0665621386 configs: riscv: starfive: Add VF2 PCIe USB3 XHCI support
Add XHCI_PCI to enable usb3-host functions.
Also add usb command and keyboard config.

Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-08-10 10:58:01 +08:00
Simon Glass
cfa5934979 x86: Enable useful options for qemu-86
This build can be used to boot 32-bit standard-distro builds. Enable some
more options, so that all possible EFI UUIDs are decoded, we can search
memory for tables, support the full set of standard-boot features, have
full logging along with debug UART and can boot from CDROM media.

This mirrors a similar patch for qemu-x86_64

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
[Drop the unknown option from defconfig]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2023-08-09 23:31:12 +08:00
Simon Glass
1fa64e155d Revert "x86: Switch QEMU over to use the bochs driver"
Unfortunately the bochs driver does not currently work with distros.
It causes a hang between grub menu selection and the OS displaying
something.

Preliminary investigation shows that GRUB does not jump to the kernel
at all.

This reproduces reliably.

This reverts commit b8956425d5.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com> # qemu-x86_64
[Slightly modify the commit message about preliminary investigation]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2023-08-09 23:31:11 +08:00
Tom Rini
a077ac13d0 Kconfigs: Correct default of "0" on hex type entries
It is not a parse error to have a default value of "0" for a "hex" type
entry, instead of "0x0".  However, "0" and "0x0" are not treated the
same even by the tools themselves. Correct this by changing the default
value from "0" to "0x0" for all hex type questions that had the
incorrect default. Fix one instance (in two configs) of a default of "0"
being used on a hex question to be "0x0". Remove the cases where a
defconfig had set a value of "0x0" to be used as the default had been
"0".

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-08-09 09:21:42 -04:00
Abdellatif El Khlifi
13f3470adc arm_ffa: efi: corstone1000: enable MM communication
turn on EFI MM communication

On Corstone-1000 platform MM communication between u-boot
and the secure world (Optee) is done using the FF-A bus.

Changes made are generated using savedefconfig.

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
2023-08-08 10:23:32 -04:00
Abdellatif El Khlifi
a09852d862 arm_ffa: introduce sandbox FF-A support
Emulate Secure World's FF-A ABIs and allow testing U-Boot FF-A support

Features of the sandbox FF-A support:

- Introduce an FF-A emulator
- Introduce an FF-A device driver for FF-A comms with emulated Secure World
- Provides test methods allowing to read the status of the inspected ABIs

The sandbox FF-A emulator supports only 64-bit direct messaging.

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
2023-08-08 10:22:03 -04:00
Tom Rini
df8967435a configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-08-07 15:17:12 -04:00
Mihai Sain
87d1cac49d board: at91: sama5d29_curiosity: add initial support for sama5d29_curiosity
Add initial support for sama5d29_curiosity board.

Hardware:
SoC: SAMA5D29 500 MHz
DRAM: LPDDR2 512 MiB
PMIC: MCP16502
Debug: UART0
Flash: QSPI NOR 8 MiB
RGB LCD connector
Mikrobus connectors x 2
SD-Card connectors x 2
USB 2.0 x 2

Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
2023-08-07 11:42:16 +03:00
Marcel Ziswiler
7d1a10659f board: toradex: add verdin am62 support
This adds initial support for the Toradex Verdin AM62 Quad 1GB WB IT
V1.0A module and subsequent V1.1 launch configuration SKUs. They are
strapped to boot from their on-module eMMC. U-Boot supports booting
from the on-module eMMC only, DFU support is disabled for now due to
missing AM62x USB support.

The device trees were taken straight from Linux v6.5-rc1.

Boot sequence is:
SYSFW ---> R5 SPL (both in tiboot3.bin) ---> ATF (TF-A) ---> OP-TEE
  ---> A53 SPL (part of tispl.bin) ---> U-boot proper (u-boot.img)

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
2023-08-04 15:03:42 -04:00
Mathew McBride
02a85922bf board: traverse: ten64: adopt standard boot defaults
With the previous updates to the device tree, Ten64
can use Standard Boot 'out of the box'.

Signed-off-by: Mathew McBride <matt@traverse.com.au>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2023-08-03 09:40:50 -04:00
Mathew McBride
6af6677f01 board: ten64: disable watchdog autostart
The watchdog driver was previously enabled but not used
until U-Boot's fsl-ls1088a.dtsi was updated to describe them.

Some Linux distributions (e.g Debian 11) do not engage the
SP805 watchdogs, causing unexpected resets after boot.

To conserve the user experience, turn off the autostart,
and we will provide a mechanism to turn them on at boot
via env vars.

Signed-off-by: Mathew McBride <matt@traverse.com.au>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2023-08-03 09:40:50 -04:00
Mathew McBride
3c052f9b22 configs: ten64: enable NVME_PCI
This restores NVMe functionality after PCI(e) NVMe support
was split out from the NVMe driver.

Signed-off-by: Mathew McBride <matt@traverse.com.au>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2023-08-03 09:40:50 -04:00
Weijie Gao
bc4adc97cf board: mediatek: add MT7988 reference boards
This patch adds general board files based on MT7988 SoCs.

MT7988 uses one mmc controller for booting from both SD and eMMC,
and the pins of mmc controller booting from SD are also shared with
one of spi controllers.
So two configs are need for these boot types:

1. mt7988_rfb_defconfig - SPI-NOR, SPI-NAND and eMMC
2. mt7988_sd_rfb_defconfig - SPI-NAND and SD

Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2023-08-03 09:40:50 -04:00
Heinrich Schuchardt
cd24d0722a riscv: sifive: initialize PCI on Unmatched
The Unmatched board is typically booted from NVMe which requires PCI.
When dropping to a console PCI is not initialized yet. 'pci enum' has to be
called.

Change the configuration to call  pci_init() in board_init_r().

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Rick Chen <rick@andestech.com>
2023-08-02 11:02:33 +08:00
Minda Chen
493c03f820 configs: starfive-jh7110: Add CONFIG_RTL8169
Add PCIe device rtl8169 net adapter driver support.

Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-08-02 11:02:32 +08:00
Mason Huo
cb2750e10b configs: starfive-jh7110: Add support for PCIe host driver
Add PCIe host driver and nvme driver in configure file.

Signed-off-by: Mason Huo <mason.huo@starfivetech.com>
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-08-02 11:02:32 +08:00
Tom Rini
aaeaef2536 Merge https://source.denx.de/u-boot/custodians/u-boot-marvell
- i2c-gpio: Correctly handle new {sda, scl}-gpios bindings (Chris)
- mvebu: x240: Use i2c-gpio instead of built in controller (Chris)
2023-08-01 10:17:23 -04:00
Jonas Karlman
1f54f71b18 board: rockchip: Add Radxa E25 Carrier Board
Radxa E25 is a network application carrier board for the Radxa CM3I SoM
with a RK3568 SoC. It features dual 2.5G ethernet, mini PCIe, M.2 B Key,
USB3, eMMC, SD, nano SIM card slot and a 26-pin GPIO header.

Features tested on a Radxa E25 v1.4:
- SD-card boot
- eMMC boot
- USB host
- PCIe/Ethernet adapters is detected
- SATA

Device tree is imported from linux next-20230728.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Tested-by: FUKAUMI Naoki <naoki@radxa.com>
2023-07-31 20:34:32 +08:00
Jagan Teki
b6fd3c63f4 configs: rockchip: Enable USB2PHY for RK3328 boards
Enable USB2PHY for all RK3328 boards.

=> usb start
starting USB...
Bus usb@ff5c0000: USB EHCI 1.00
Bus usb@ff5d0000: USB OHCI 1.0
Bus usb@ff600000: generic_phy_get_bulk : no phys property
Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
Bus usb@ff580000: USB DWC2
scanning bus usb@ff5c0000 for devices... 2 USB Device(s) found
scanning bus usb@ff5d0000 for devices... 1 USB Device(s) found
scanning bus usb@ff600000 for devices... 2 USB Device(s) found
scanning bus usb@ff580000 for devices... 2 USB Device(s) found
       scanning usb for storage devices... 2 Storage Device(s) found
=> usb tree
USB device tree:
  1  Hub (480 Mb/s, 0mA)
  |  u-boot EHCI Host Controller
  |
  +-2  Mass Storage (480 Mb/s, 500mA)
       TS-RDF5A Transcend 000000000009

  1  Hub (12 Mb/s, 0mA)
      U-Boot Root Hub

  1  Hub (5 Gb/s, 0mA)
  |  U-Boot XHCI Host Controller
  |
  +-2  Mass Storage (5 Gb/s, 224mA)
       SanDisk Dual Drive 040130e3ee554b7078843f4eb331646

  1  Hub (480 Mb/s, 0mA)
  |   U-Boot Root Hub
  |
  +-2  Human Interface (12 Mb/s, 98mA)
       Logitech USB Receiver

=> dm tree -s
 Class     Index  Probed  Driver                Name
-----------------------------------------------------------
 syscon        1  [ + ]   syscon                |-- syscon@ff450000
 phy           0  [ + ]   rockchip_usb2phy      |   `-- usb2phy@100
 clk           2  [ + ]   rockchip_usb2phy_clo  |       |-- usb480m_phy
 phy           1  [ + ]   rockchip_usb2phy_por  |       |-- otg-port
 phy           2  [ + ]   rockchip_usb2phy_por  |       `-- host-port
 sysinfo       0  [ + ]   sysinfo_smbios        |-- smbios
 usb           3  [ + ]   dwc2_usb              |-- usb@ff580000
 usb_hub       3  [ + ]   usb_hub               |   `-- usb_hub
 usb_dev_ge    0  [ + ]   usb_dev_generic_drv   |       `-- generic_bus_3_dev_2
 usb           0  [ + ]   ehci_generic          |-- usb@ff5c0000
 usb_hub       0  [ + ]   usb_hub               |   `-- usb_hub
 usb_mass_s    0  [ + ]   usb_mass_storage      |       `-- usb_mass_storage
 blk           2  [ + ]   usb_storage_blk       |           |-- usb_mass_storage.lun0
 partition     4  [ + ]   blk_partition         |           |   |-- usb_mass_storage.lun0:1
 partition     5  [ + ]   blk_partition         |           |   `-- usb_mass_storage.lun0:2
 bootdev       3  [   ]   usb_bootdev           |           `-- usb_mass_storage.lun0.bootdev
 usb           1  [ + ]   ohci_generic          `-- usb@ff5d0000
 usb_hub       1  [ + ]   usb_hub                   `-- usb_hub

Cc: Tianling Shen <cnsztl@gmail.com>
Cc: David Bauer <mail@david-bauer.net>
Cc: Loic Devulder <ldevulder@suse.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Banglang Huang <banglang.huang@foxmail.com>
Cc: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31 20:33:18 +08:00
Jagan Teki
5d334b70cc configs: Enable DWC3 USB 3.0 on RK3328 boards
Enable USB 3.0 in all RK3328 boards.

=> usb start
starting USB...
Bus usb@ff5c0000: ehci_generic usb@ff5c0000: Failed to get clocks (ret=-19)
Port not available.
Bus usb@ff5d0000: USB OHCI 1.0
Bus usb@ff600000: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
Bus usb@ff580000: 1 USB Device(s) found
       scanning usb for storage devices... 1 Storage Device(s) found
=> usb tree
USB device tree:
  1  Hub (12 Mb/s, 0mA)
      U-Boot Root Hub

  1  Hub (5 Gb/s, 0mA)
  |  U-Boot XHCI Host Controller
  |
  +-2  Mass Storage (5 Gb/s, 224mA)
       SanDisk Dual Drive 040130e3ee554b7078843f4eb331646

  1  Hub (480 Mb/s, 0mA)
      U-Boot Root Hub

Cc: Tianling Shen <cnsztl@gmail.com>
Cc: David Bauer <mail@david-bauer.net>
Cc: Loic Devulder <ldevulder@suse.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Banglang Huang <banglang.huang@foxmail.com>
Cc: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31 20:33:18 +08:00
Jagan Teki
559911ff2e configs: Drop unused XHCI_DWC3 for RK3328 boards
Driver support for rk3328 is not supported so drop this
unused XHCI_DWC3.

Cc: Tianling Shen <cnsztl@gmail.com>
Cc: David Bauer <mail@david-bauer.net>
Cc: Loic Devulder <ldevulder@suse.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Banglang Huang <banglang.huang@foxmail.com>
Cc: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31 20:33:18 +08:00
Chris Packham
5c1c6b7306 arm: mvebu: x240: Use i2c-gpio instead of built in controller
There is an Errata with the built-in I2C controller where various I2C
hardware errors cause a complete lockup of the CPU (which eventually
results in an watchdog reset).

Put the I2C MPP pins into GPIO mode and use the i2c-gpio driver instead.
This uses a bit-banged implementation of an I2C controller and avoids
triggering the Errata.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2023-07-31 13:50:57 +02:00
Eugen Hristev
b8fc65473a board: rockchip: add Radxa ROCK5A Rk3588 board
ROCK 5A is a Rockchip RK3588S based SBC (Single Board Computer) by Radxa.

There are tree variants depending on the DRAM size : 4G, 8G and 16G.

Specifications:

     Rockchip Rk3588S SoC
     4x ARM Cortex-A76, 4x ARM Cortex-A55
     4/8/16GB memory LPDDR4x
     Mali G610MC4 GPU
     MIPI CSI 2 multiple lanes connector
     4-lane MIPI DSI connector
     Audio – 3.5mm earphone jack
     eMMC module connector
     uSD slot (up to 128GB)
     2x USB 2.0, 2x USB 3.0
     2x micro HDMI 2.1 ports, one up to 8Kp60, the other up to 4Kp60
     Gigabit Ethernet RJ45 with optional PoE support
     40-pin IO header including UART, SPI, I2C and 5V DC power in
     USB PD over USB Type-C
     Size: 85mm x 56mm (Raspberry Pi 4 form factor)

Kernel commits:
d1824cf95799 ("arm64: dts: rockchip: Add rock-5a board")
991f136c9f8d ("arm64: dts: rockchip: Update sdhci alias for rock-5a")
304c8a759953 ("arm64: dts: rockchip: Remove empty line from rock-5a")
cda0c2ea65a0 ("arm64: dts: rockchip: Fix RX delay for ethernet phy on rk3588s-rock5a")

Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31 17:34:43 +08:00
Jonas Karlman
747f9f2663 rockchip: rk3588-rock-5b: Fix SPI Flash alias
The commit fd6e425be2 ("rockchip: rk3588-rock-5b: Enable boot from SPI
NOR flash") enabled SPI flash support by adding a spi0 alias.

Correct this by adding spi0-spi5 aliases in rk3588s-u-boot.dtsi and
SF_DEFAULT_BUS=5 and SPL_DM_SEQ_ALIAS=y in defconfig. Also enabled
support for parsing and auto discovery of parameters, SFDP.

Fixes: fd6e425be2 ("rockchip: rk3588-rock-5b: Enable boot from SPI NOR flash")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31 17:34:43 +08:00
Jonas Karlman
52f6b96d27 rockchip: rk3568-rock-3a: Fix SPI Flash alias
The commit 64f79f88a7 ("rockchip: rk3568-rock-3a: Enable boot from SPI
NOR flash") enabled SPI flash support by overriding the spi0 alias.

Correct this by adding a new spi4 alias in rk356x-u-boot.dtsi and
SF_DEFAULT_BUS=4 and SPL_DM_SEQ_ALIAS=y in defconfig. Also enabled
support for parsing and auto discovery of parameters, SFDP.

Fixes: 64f79f88a7 ("rockchip: rk3568-rock-3a: Enable boot from SPI NOR flash")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31 17:34:43 +08:00
Jonas Karlman
ee75f16868 rockchip: rk3399-roc-pc: Fix SPL max size and SPI flash payload offset
TPL max size is limited to 184 KB, SPL is loaded to 0x0 and TF-A is
loaded to 0x40000, this limit SPL max size to 256 KB. With BootRom only
reading first 2 KB per 4 KB page of SPI flash, 880 KB may be needed for
TPL+SPL in a worst-case scenario. (184 KB + 256 KB) x 2 = 880 KB

Use 0xE0000 (896 KB) as the payload offset in SPI flash, this allows
for a payload of 3168 KB before env offset start to overlap.

Also add CONFIG_ROCKCHIP_SPI_IMAGE=y to build a bootable SPI flash
image, u-boot-rockchip-spi.bin.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Quentin Schulz <foss+u-boot@0leil.net>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31 17:34:43 +08:00
Jonas Karlman
263f81d3a5 rockchip: rk3399-pinephone-pro: Fix SPL max size and SPI flash payload offset
TPL max size is limited to 184 KB, SPL is loaded to 0x0 and TF-A is
loaded to 0x40000, this limit SPL max size to 256 KB. With BootRom only
reading first 2 KB per 4 KB page of SPI flash, 880 KB may be needed for
TPL+SPL in a worst-case scenario. (184 KB + 256 KB) x 2 = 880 KB

Use 0xE0000 (896 KB) as the payload offset in SPI flash, this allows
for a payload of 3168 KB before env offset start to overlap.

Also add CONFIG_ROCKCHIP_SPI_IMAGE=y to build a bootable SPI flash
image, u-boot-rockchip-spi.bin.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Quentin Schulz <foss+u-boot@0leil.net>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31 17:34:43 +08:00
Jonas Karlman
cc11d5c4ba rockchip: rk3399-pinebook-pro: Fix SPL max size and SPI flash payload offset
TPL max size is limited to 184 KB, SPL is loaded to 0x0 and TF-A is
loaded to 0x40000, this limit SPL max size to 256 KB. With BootRom only
reading first 2 KB per 4 KB page of SPI flash, 880 KB may be needed for
TPL+SPL in a worst-case scenario. (184 KB + 256 KB) x 2 = 880 KB

Use 0xE0000 (896 KB) as the payload offset in SPI flash, this allows
for a payload of 3168 KB before env offset start to overlap.

Also add CONFIG_ROCKCHIP_SPI_IMAGE=y to build a bootable SPI flash
image, u-boot-rockchip-spi.bin.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Quentin Schulz <foss+u-boot@0leil.net>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31 17:34:43 +08:00
Jonas Karlman
ada6328738 rockchip: rk3399-rockpro64: Fix SPL max size and SPI flash payload offset
TPL max size is limited to 184 KB, SPL is loaded to 0x0 and TF-A is
loaded to 0x40000, this limit SPL max size to 256 KB. With BootRom only
reading first 2 KB per 4 KB page of SPI flash, 880 KB may be needed for
TPL+SPL in a worst-case scenario. (184 KB + 256 KB) x 2 = 880 KB

Use 0xE0000 (896 KB) as the payload offset in SPI flash, this allows
for a payload of 3168 KB before env offset start to overlap.

Also remove CONFIG_LTO=y now that there is sufficient space for SPL in
SPI flash, and to fix a build issue reported by Peter Robinson.

Fixes: 5713135ecc ("rockchip: rockpro64: Build u-boot-rockchip-spi.bin")
Reported-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Quentin Schulz <foss+u-boot@0leil.net>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31 17:34:43 +08:00
Jonas Karlman
6855fa625c board: rockchip: Add Pine64 SOQuartz on CM4-IO
The Pine64 SOQuartz compute module is mostly pin-compatible with the RPi
CM4 form factor. Therefore, it can slot into the official Raspberry Pi
CM4 IO carrier board. Add this configuration to U-Boot.

Features tested with a SOQuartz 4GB v1.1 2022-07-11:
- SD-card boot
- eMMC boot
- USB host

Device tree is imported from linux v6.4.

Co-developed-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31 14:41:36 +08:00
Jonas Karlman
d0026e5908 board: rockchip: Add Pine64 SOQuartz on Blade
The Pine64 SOQuartz Blade board is a carrier board for the SOQuartz
CM4-compatible compute module. It features PoE, an M.2 slot, an SD card
slot, HDMI, USB, serial and ethernet.

Features tested with a SOQuartz 4GB v1.1 2022-07-11:
- SD-card boot
- eMMC boot
- PCIe/NVMe
- USB host

Device tree is imported from linux v6.4.

Co-developed-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31 14:41:35 +08:00
Jonas Karlman
651492bfb2 board: rockchip: Add Pine64 SOQuartz on Model A
The Pine64 SOQuartz Model A board is a carrier board for the SOQuartz
CM4-compatible compute module. It exposes PCIe, ethernet, USB, HDMI,
CSI, DSI, eDP and a 40 pin GPIO header, and is powered by 12V DC.

Features tested with a SOQuartz 4GB v1.1 2022-07-11:
- SD-card boot
- eMMC boot
- PCIe/NVMe/AHCI
- USB host

Device tree is imported from linux v6.4.

Co-developed-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31 14:41:35 +08:00
Jonas Karlman
f52452bbea board: rockchip: Add Pine64 Quartz64-B Board
The Pine64 Quartz64 Model B is a credit-card sized single-board
computer based on the Rockchip RK3566 SoC. The board features an M.2
PCIe slot, USB3, USB2, eMMC, SD, ethernet, HDMI, analog audio out, a
40 pin GPIO header and a DSI and CSI port, as well as on-board Wi-Fi.

Features tested on a Quartz64-B 4GB v1.4 2022-06-06:
- SD-card boot
- eMMC boot
- SPI Flash boot
- PCIe/NVMe
- USB host

Device tree is imported from linux v6.4.

Co-developed-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31 14:41:35 +08:00
Jonas Karlman
9c1b5d163e board: rockchip: Add Pine64 Quartz64-A Board
The Pine64 Quartz64 Model A is a single-board computer based on the
Rockchip RK3566 SoC. The board features USB3, SATA, PCIe, HDMI, USB2.0,
CSI, DSI, eDP, eMMC, SD, and an e-paper parallel port, as well as a
20 pin GPIO header.

Features tested on a Quartz64-A 8GB v2.0 2021-04-27:
- SD-card boot
- eMMC boot
- PCIe/NVMe/AHCI
- USB host

Device tree is imported from linux v6.4.

Co-developed-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31 14:41:35 +08:00
Jonas Karlman
f8a2d1c108 rockchip: rk3568: Use dwc3-generic driver
Change RK3568 devices to use the newer dwc3-generic driver instead of
the old xhci-dwc3 driver for USB 3.0 support.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31 14:40:38 +08:00
Alper Nebi Yasak
42cb8f0112 rockchip: chromebook_speedy: Enable sound
Commit ec107f04b6 ("rockchip: chromebook_minnie: Enable sound") and
commit 2d0c01b8f0 ("sound: rockchip: Add sound support for jerry")
enable audio support for chromebook_minnie and chromebook_jerry. Enable
it for chromebook_speedy as well, but put the non-upstream sound node
in the board -u-boot.dtsi instead.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31 14:40:13 +08:00
Alper Nebi Yasak
5c6e387e46 rockchip: chromebook_jerry: Re-enable MAX98090 codec driver
Sound support for chromebook_jerry needs the MAX98090 codec driver. This
was enabled in commit 2d0c01b8f0 ("sound: rockchip: Add sound support
for jerry"), but apparently lost in commit 7ae2729401 ("configs:
Resync with savedefconfig"). Enable it again.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>   # chromebook_jerry
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31 14:40:13 +08:00
Alper Nebi Yasak
7bd46bf4c6 rockchip: veyron: Use TrueType fonts
Commit 815ed79d83 ("video: rockchip: Use TrueType fonts with jerry")
enables makes chromebook_jerry use TrueType fonts. Make other veyron
boards switch to it as well.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31 14:40:13 +08:00
Alper Nebi Yasak
d25b34751b rockchip: veyron: Add serial, logging, silent console support
Commit eba768c545 ("rockchip: jerry: Add serial support") enables
ROCKCHIP_SERIAL for chromebook_jerry to make the serial console work
correctly. Enable it also for other veyron boards.

Also enable logging and disable scrolling multiple lines at once as in
chromebook_jerry, and enable silent console as chromebook_minnie does.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31 14:40:13 +08:00
Alper Nebi Yasak
cbe7322d17 rockchip: veyron: Enable RESET driver
Commit 70e351bdfe ("rockchip: jerry: Enable RESET driver") enables
DM_RESET for chromebook_jerry to fix its display as required by changes
to the Rockchip video drivers. Enable it for other veyron boards as
well.

Fixes: cd529f7ad6 ("rockchip: video: edp: Add missing reset support")
Fixes: 9749d2ea29 ("rockchip: video: vop: Add reset support")
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>   # chromebook_jerry
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31 14:40:13 +08:00
Pegorer Massimo
6d79d8a743 configs: rockchip: drop useless DEBUG_UART_SKIP_INIT
DEBUG_UART_SKIP_INIT feature is implemented only by s5p (DEBUG_UART_S5P)
and pl01x (DEBUG_UART_PL010 or DEBUG_UART_PL011) serial drivers, but all
ARCH_ROCKCHIP configs rely on default DEBUG_UART_NS16550. The ns16550
serial driver does not depends on DEBUG_UART_SKIP_INIT, so drop it from
rockchip configs.

Signed-off-by: Massimo Pegorer <massimo.pegorer@vimar.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31 14:39:01 +08:00
Pegorer Massimo
9f2c7349e5 rockchip: rk3308: no DEBUG_UART_BOARD_INIT for ROCK Pi S
Call to board_debug_uart_init() is useless, as mainline U-Boot can
not build TPL for rk3308, and proprietary ddr.bin to be used as TPL
is responsible to init debug uart. Moreover current implementation
of board_debug_uart_init() is not compatible with ROCK Pi S, as it
sets pins for UART2 channel 1 breaking access to sdmmc due to pinmux
conflict. Debug uart for ROCK Pi S is UART0.

Thus, avoid ROCKCHIP_RK3308 to select DEBUG_UART_BOARD_INIT and allow
to deselct it in rock-pi-s-rk3308_defconfig. The DEBUG_UART_BOARD_INIT
is already implied by ARCH_ROCKCHIP, therefore other boards based on
rk3308 chip are not affected by change.

Signed-off-by: Massimo Pegorer <massimo.pegorer@vimar.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31 14:38:51 +08:00
Tom Rini
6544943819 Merge branch '2023-07-27-TI-K2-K3-updates'
- Resync some of the K3 DTS files with the kernel, and pull in some
  required related updates to keep drivers in sync with the dts files
  now.  Bring in some incremental fixes on top of one of the series I
  applied recently as well as updating the iot2050 platform.  Also do a
  few small updates to the K2 platforms.
2023-07-28 10:25:50 -04:00
Andrew Davis
b7e3e6344f configs: keystone2: Unwind KERNEL_MTD_PARTS definition
This is more complex than it needs to be and makes converting these
boards over to plain text env files more difficult. Remove setting
mtdparts as the DTS already contain the partitions. While here also
drop the conflicting definitions from the K2 defconfigs.

Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2023-07-28 10:11:01 -04:00
Manorit Chawdhry
1e587054d4 configs: am62x: add SPL_MAX_SIZE back
This was regressed by the following commit and is required to build with
additional configs enabled.

Fixes: 14439cd71c ("configs: k3: make consistent bootcmd across all k3 socs")

Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Tested-by: Nikhil M Jain <n-jain1@ti.com>
2023-07-28 10:11:01 -04:00
Jan Kiszka
784f7382de configs: iot2050: Enabled keyed autoboot
Only accept SPACE to stop autobooting. This is safer to avoid accidental
interruptions on unattended devices.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2023-07-28 10:11:01 -04:00
Jan Kiszka
badaa1f6a7 boards: siemens: iot2050: Unify PG1 and PG2/M.2 configurations again
This avoids having to maintain to defconfigs that are 99% equivalent.
The approach is to use binman to generate two flash images,
flash-pg1.bin and flash-pg2.bin. With the help of a template dtsi, we
can avoid duplicating the common binman image definitions.

Suggested-by: Andrew Davis <afd@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2023-07-28 10:11:01 -04:00
Jan Kiszka
00e1c4549d boards: siemens: iot2050: Fix boot configuration
The common env bits now come via ti_armv7_common.env, include it.
Furthermore restore the board-specific boot targets and their ordering
that is now enforced k3-wide differently. Finally, enable
CONFIG_LEGACY_IMAGE_FORMAT explicitly which got lost while turning
FIT_SIGNATURE on by default for k3 devices.

Fixes: 53873974 ("include: armv7: Enable distroboot across all configs")
Fixes: 4ae1a247 ("env: Make common bootcmd across all k3 devices")
Fixes: 86fab110 ("Kconfig: Enable FIT_SIGNATURE if ARM64")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2023-07-28 10:11:00 -04:00
Jonas Karlman
94da929b93 board: rockchip: Add Hardkernel ODROID-M1
Hardkernel ODROID-M1 is a single board computer with a RK3568B2 SoC,
a slightly modified version of the RK3568 SoC.

Features tested on a ODROID-M1 8GB v1.0 2022-06-13:
- SD-card boot
- eMMC boot
- SPI Flash boot
- PCIe/NVMe/AHCI
- SATA port
- USB host

Device tree is imported from linux v6.4.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Tested-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-28 18:45:03 +08:00
Jonas Karlman
a76aa6ffa6 rockchip: rk3568-rock-3a: Enable PCIe and NVMe support
Add missing pinctrl and defconfig options to enable PCIe and NVMe
support on Radxa ROCK 3 Model A.

Use of pcie20m1_pins and pcie30x2m1_pins ensure IO mux selection M1.
The following pcie_reset_h and pcie3x2_reset_h ensure GPIO func is
restored to the perstn pin, a workaround to avoid having to define
a new rockchip,pins.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-28 18:45:03 +08:00
Alper Nebi Yasak
e5b33200f8 rockchip: veyron: Enable Winbond SPI flash
Some veyron boards seem to have Winbond SPI flash chips instead of
GigaDevice ones. At the very least, coreboot builds for veyron boards
have them enabled [1]. Enable support for them here as well.

[1] https://review.coreboot.org/c/coreboot/+/9719

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-28 18:45:03 +08:00
Christopher Obbard
0022461ba6 arm: rockchip: Add Radxa ROCK 4SE
Add board-specific devicetree/config for the RK3399T-based Radxa ROCK 4SE
board. This board offers similar peripherals in a similar form-factor to
the existing ROCK Pi 4B but uses the cost-optimised RK3399T processor
(which has different OPP table than the RK3399) and other minimal hardware
changes.

Kernel tag: next-20230719
Kernel commits:
- 86a0e14a82ea ("arm64: dts: rockchip: Add Radxa ROCK 4SE")

Signed-off-by: Christopher Obbard <chris.obbard@collabora.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-28 18:45:03 +08:00
Alex Bee
fa86c3ee74 configs: evb-rk3229: Increase SPL_STACK_R_MALLOC_SIMPLE_LEN
An OP-TEE FIT image will fail to extract in SPL because the malloc stack
size is currently limited to 0x2000 for evb-rk3229 board.

In SPL we do not have to care about size limitations, since we are no
longer bound to SRAM limits after DRAM initialization has been done in TPL.

Use the default value for CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN in order
successfully unpack the FIT image.

Signed-off-by: Alex Bee <knaerzche@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-28 18:45:03 +08:00
Christopher Obbard
5b269ed404 configs: rockchip: rock5b-rk3588: Enable CONFIG_PCI_INIT_R
Enable CONFIG_PCI_INIT_R for rock5b pci enumeration during boot in order
to autodetect the PCI ethernet NIC during the boot process.

Signed-off-by: Christopher Obbard <chris.obbard@collabora.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-28 18:45:03 +08:00
Quentin Schulz
9010c43b03 rockchip: puma: pass platform parameter to TF-A
Puma supports upstream TF-A and is configured to output serial on UART0
instead of the default UART2. Since U-Boot is properly configured to
output on UART0, let's pass the DT to TF-A so there is no need for a
custom TF-A to make the latter output to UART0 too.

Cc: Quentin Schulz <foss+uboot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-28 18:45:03 +08:00
Quentin Schulz
e6fa0dcc6f rockchip: rk3399: pass platform parameter to TF-A by default for new RK3399 boards
Long are gone the times TF-A couldn't handle the FDT passed by U-Boot.
Specifically, since commit e7b586987c0a ("rockchip: don't crash if we
get an FDT we can't parse") in TF-A, failure to parse the FDT will use
the fallback mechanism. This patch was merged in TF-A v2.4-rc0 from two
years ago.

New boards should likely have this option disabled or explicitly enable
it in their respective defconfig.

Because existing boards might depend on a TF-A version that predates
v2.4, let's just enable this option in all RK3399 defconfigs.
Maintainers of each board can decide for themselves if they would prefer
to disable this option and allow U-Boot to pass the DT to TF-A.

Cc: Quentin Schulz <foss+uboot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-28 18:45:03 +08:00
Jagan Teki
0a3a5746c3 board: rockchip: Add Edgeble Neural Compute Module 6B
Neural Compute Module 6B(Neu6B) is a 96boards SoM-CB compute module
based on Rockchip RK3588J from Edgeble AI.

Add support for this SoM and IO board.

Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-28 18:45:02 +08:00
Tianling Shen
6a73211d4b rockchip: rk3568: Add support for FriendlyARM NanoPi R5C
FriendlyARM NanoPi R5C is an open-sourced mini IoT gateway device.

Specification:
- Rockchip RK3568
- 1/4GB LPDDR4X RAM
- 8/32GB eMMC
- SD card slot
- M.2 Connector
- 2x USB 3.0 Port
- 2x 2500 Base-T (PCIe, r8125)
- HDMI 2.0
- MIPI DSI/CSI
- USB Type C 5V

The device tree is taken from kernel v6.4-rc1.

Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Tianling Shen <cnsztl@gmail.com>
2023-07-28 18:45:02 +08:00
Tianling Shen
0ef326b5e9 rockchip: rk3568: Add support for FriendlyARM NanoPi R5S
FriendlyARM NanoPi R5S is an open-sourced mini IoT gateway device.

Board Specifications
- Rockchip RK3568
- 2 or 4GB LPDDR4X
- 8GB or 16GB eMMC, SD card slot
- GbE LAN (Native)
- 2x 2.5G LAN (PCIe)
- M.2 Connector
- HDMI 2.0, MIPI DSI/CSI
- 2xUSB 3.0 Host
- USB Type C PD, 5V/9V/12V
- GPIO: 12-pin 0.5mm FPC connector

The device tree is taken from kernel v6.4-rc1.

Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Tianling Shen <cnsztl@gmail.com>
2023-07-28 18:45:02 +08:00
Tianling Shen
9bd954ab8a rockchip: rk3328: Add support for Orange Pi R1 Plus LTS
The OrangePi R1 Plus LTS is a minor variant of OrangePi R1 Plus with
the on-board NIC chip changed from rtl8211e to yt8531c, and RAM type
changed from DDR4 to LPDDR3.

The device tree is taken from kernel v6.4-rc1.

Signed-off-by: Tianling Shen <cnsztl@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-28 18:45:02 +08:00
Tianling Shen
69e16c7b1c rockchip: rk3328: Add support for Orange Pi R1 Plus
Orange Pi R1 Plus is a Rockchip RK3328 based SBC by Xunlong.

This device is similar to the NanoPi R2S, and has a 16MB
SPI NOR (mx25l12805d). The reset button is changed to
directly reset the power supply, another detail is that
both network ports have independent MAC addresses.

The device tree and description are taken from kernel v6.3-rc1.

Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Tianling Shen <cnsztl@gmail.com>
2023-07-28 18:45:02 +08:00
Chris Morgan
12b715bd4f configs: Update anbernic-rgxx3_defconfig for panel detection
Update the anbernic-rgxx3_defconfig file to support panel autodetection
and automatically updating the compatible string in the devicetree.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-28 18:45:02 +08:00
Eugen Hristev
a6bd5bc988 configs: rock5b-rk3588: enable USB 3.0 controller, command, gadget
Enable configuration for USB 3.0 controller, the commands required,
and the gadget drivers.

Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-28 18:45:02 +08:00
Chris Morgan
3c057b4c6c rockchip: board: Update Odroid Go2 to Support Additional Revisions
Update the board.c file for the Odroid Go Advance to support the
Black Edition and the Odroid Go Super. The Odroid Go Advance Black
Edition differs from the original model with the addition of 2
extra buttons and an ESP8266 WiFi module. The Odroid Go Super
adds an additional 2 buttons compared to the Black Edition, along
with a larger panel and larger battery.

This change uses the value of ADC0 to determine which of these
3 models it is, and then changes the ${fdtfile} environment variable
to match the proper devicetree name in mainline Linux.

Tested on an Odroid Go Advance (first revision) and an Odroid Go Super.
The correct ${fdtfile} variable was set for each device.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-28 18:45:02 +08:00
Eugen Hristev
14bb9c27b7 configs: rock5b-rk3588: add rtl8169 driver
Add the rtl8169 driver, which supports the rtl8125b device, which is
connected on the pciE bus on this board.
Enable also CONFIG_SYS_HAS_NONCACHED_MEMORY to have the descriptors stored.

Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-28 18:45:02 +08:00
Angelo Dureghello
838a6a7201 configs: m68k: add watchdog driver
Add config options for mcf_wdt driver.

Signed-off-by: Angelo Dureghello <angelo@kernel-space.org>
---
Changes for v2:
- none
Changes for v3:
- none
2023-07-25 23:21:42 +02:00
Tom Rini
9455dc322c configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-07-25 17:00:57 -04:00
Tom Rini
94e7cb181a Revert "Merge branch '2023-07-24-introduce-FF-A-suppport'"
This reverts commit d927d1a808, reversing
changes made to c07ad9520c.

These changes do not pass CI currently.

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-07-24 19:51:05 -04:00
Abdellatif El Khlifi
c7f556c7a8 arm_ffa: efi: corstone1000: enable MM communication
turn on EFI MM communication

On corstone1000 platform MM communication between u-boot
and the secure world (Optee) is done using the FF-A bus.

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
2023-07-24 15:30:03 -04:00
Abdellatif El Khlifi
32dd07ff46 arm_ffa: introduce sandbox FF-A support
Emulate Secure World's FF-A ABIs and allow testing U-Boot FF-A support

Features of the sandbox FF-A support:

- Introduce an FF-A emulator
- Introduce an FF-A device driver for FF-A comms with emulated Secure World
- Provides test methods allowing to read the status of the inspected ABIs

The sandbox FF-A emulator supports only 64-bit direct messaging.

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
2023-07-24 15:30:03 -04:00
Tom Rini
45622f3262 Merge branch '2023-07-22-TI-K3-improvements'
- Actually merge the assorted K3 platform improvements that were
  supposed to be in commit 247aa5a191 ("Merge branch
  '2023-07-21-assorted-TI-platform-updates'")
2023-07-24 13:55:59 -04:00
Tom Rini
7177259893 First set of u-boot-atmel fixes for the 2023.07 cycle
-----BEGIN PGP SIGNATURE-----
 
 iQFQBAABCgA6FiEEqxhEmNJ6d7ZdeFLIHrMeAg6sL8gFAmS+Xv0cHGV1Z2VuLmhy
 aXN0ZXZAY29sbGFib3JhLmNvbQAKCRAesx4CDqwvyMgxB/9BTjFfVaglu5+m/kiw
 XEVSJSwe1H3sc5vFlMUYTSAOSF/mzdZIZHXC6THkCU1yfzu9AZXhp4mfRUiNTwth
 w8bvYXm4ZjSxcGPVxVqfThN8iT/SWLpaUC8j7TosP1VKYwzpGmqLyO+ZLu7IwdH+
 /wyXFuYtVQVxmSC6SMNAD5eNtS4O6pufat5e5EkhR2atZ/rhhAYmb9zv3RFuCuSM
 bxqM+4/FqpENaIdMOPk7EbB3S1C5MsJS2b+s1oIRRLfItlLjpQG4nZnuJGRlL/Bg
 mcqYYgHrAnFbLXVOEe5WxMKR1E2fMbtKSlJGpoYO9rSdQRzxGuyRrDm9M77GH2pJ
 0Q/F
 =DT1v
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-at91-fixes-2023.10-a' of https://source.denx.de/u-boot/custodians/u-boot-at91

First set of u-boot-atmel fixes for the 2023.07 cycle:

This small fixes set includes the LTO configs for the boards that had
the SPL size up to the limit (sama5d2-based), such that more code can be
added.  It also includes a fix for mmc non-removable.
2023-07-24 10:58:25 -04:00
Eugen Hristev
f5b9587449 configs: sama5d2: enable CONFIG_LTO
arm-none-linux-gnueabihf-ld.bfd: u-boot-spl section `__u_boot_list' will not fit in region `.sram'
arm-none-linux-gnueabihf-ld.bfd: region `.sram' overflowed by 100 bytes

SPL is at limit so to stop seeing above error in built, enable
link time optimizations CONFIG_LTO.

Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Tested-by: Mihai Sain <mihai.sain@microchip.com>
2023-07-24 14:19:33 +03:00
Stefan Roese
2ac1f5982e configs: at91: sama5d2_icp_mmc: Enable CONFIG_LTO
Adding just a tiny bit more code for sama5d2_icp_mmc leads to a SRAM
image overflow. Fix this by enabling LTO for this board, so that such
changes still can be made to the common U-Boot code.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Pali Rohár <pali@kernel.org>
Tested-by: Mihai Sain <mihai.sain@microchip.com>
[eugen.hristev@microchip.com: restrict patch just to CONFIG_LTO]
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
2023-07-24 14:18:03 +03:00
Chanho Park
43cefb4934 configs: visionfive2: add a trailing space to prompt
Adds a trailing space to SYS_PROMPT to make it easier to distinguish
between commands and the prompt.

Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-07-24 13:22:02 +08:00
Kamlesh Gurudasani
e5031cc07e configs: am64: Fix booting of fitImage on AM64x
Do not limit the maximum size of the buffer that is used to decompress
the OS image in to, this causes issue while inflating the image, if image
size is greater than the buffer.
Remove CONFIG_SYS_BOOTM_LEN

Signed-off-by: Kamlesh Gurudasani <kamlesh@ti.com>
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-07-21 22:07:46 -04:00
Kamlesh Gurudasani
14439cd71c configs: k3: make consistent bootcmd across all k3 socs
Default to common bootcmd that is set across all k3 devices.

Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Kamlesh Gurudasani <kamlesh@ti.com>
2023-07-21 22:07:45 -04:00
Andrew Davis
052ad4ad6a configs: Enable setexpr command on TI devices
This is used when building the FIT image configuration string. Enable
it for all FIT using TI platforms.

Signed-off-by: Andrew Davis <afd@ti.com>
[ extend to other k3 boards ]
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-07-21 20:35:50 -04:00
Manorit Chawdhry
a5e8678e0a configs: k3: Remove saved environments
Having saved environments usually causes inconsistencies while in
development workflow. The saved environments conflict with the
default ones that U-boot should be updating during development
but that doesn't happen and the saved environments need to be
reset during bootups to test the changes causing extra debugs.

Remove the saved environments as a default. Environments can always
be re-enabled locally if one does like them or needs them for
some production environment. Optionally, Uenv.txt can also be used on
some of the boot media.

Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-07-21 20:35:48 -04:00
Nikhil M Jain
1f7682383f configs: am62x_evm_a53: Add bloblist address
Set bloblist address to 0x80D00000.

Signed-off-by: Nikhil M Jain <n-jain1@ti.com>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
2023-07-21 15:32:12 -04:00
Tom Rini
226ecf8be4 Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sunxi
For once this adds USB support for two SoCs: the H616 and the F1C100s
series. The rest is support for LPDDR3 DRAM chips on H616 boards.

Gitlab CI passed, and I booted that briefly on an H616 and an F1C200s
board. I don't have an H616 board with LPDDR3 DRAM, but reportedly that
works for Mikhail, and doesn't regress on my DDR3 boards.
2023-07-21 10:01:11 -04:00
Raju Kumar Pothuraju
378f4eef09 xilinx: zynq: Enable fdt apply utility for zynq
Enables the FDT library (libfdt) overlay support for zynq platforms
to be able to use fdt apply command.

Signed-off-by: Raju Kumar Pothuraju <rajukumar.pothuraju@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/ab26dd186fb752b3d607e6160ae5baf6661d5de7.1688990179.git.michal.simek@amd.com
2023-07-21 09:00:38 +02:00
Ashok Reddy Soma
37688da586 xilinx: versal-net: Add mini eMMC 5.1 configuration
Add support for Versal NET mini eMMC 5.1 configuration. Add device tree
and defconfig.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20230614121351.21521-4-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-07-21 09:00:38 +02:00
Ashok Reddy Soma
38e0fc06b2 xilinx: versal-net: Add mini ospi configuration
Add support for Versal NET mini Octal SPI flash configuration. This runs
from onchip memory, so it has to be compact. Hence only Octal SPI
related settings are enabled.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20230614121351.21521-3-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-07-21 09:00:38 +02:00
Ashok Reddy Soma
96683d3436 xilinx: versal-net: Add mini qspi configuration
Add support for Versal NET mini Quad SPI flash configuration. This runs
from onchip memory, so it has to be compact. Hence only Quad SPI
related settings are enabled.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20230614121351.21521-2-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-07-21 09:00:38 +02:00
Mikhail Kalashnikov
5d6f013adc sunxi: H616: add DRAM type selection
Allwinner H616 SoC supports several types of DRAM memory. To further
integrate other types of memory, we need to add this delimitation.

Signed-off-by: Mikhail Kalashnikov <iuncuim@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2023-07-21 00:54:13 +01:00
Andre Przywara
6acc5fa581 sunxi: H616: enable USB support for H616 boards
Now that the PHY driver supports the H616 USB PHY, we can enable USB
support for the two H616 boards.
As the OrangePi Zero2 has a USB-C port hard-wired to peripheral mode,
let's enable USB gadget mode for port 0, so people can use fastboot,
ethernet or mass storage functionality.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-07-21 00:28:13 +01:00
Tom Rini
5dcfc99b2b Merge tag 'fsl-qoriq-2023-7-13' of https://source.denx.de/u-boot/custodians/u-boot-fsl-qoriq
Enable DM_SERIAL for T2080RDB, T4240RDB, T1042D4RDB, T1024RDB
2023-07-19 07:59:34 -04:00
Joshua Watt
95811666ae dm: test: Add test for part_get_info_by_type
Adds a test suite to ensure that part_get_info_by_type works correctly
by creating a hybrid GPT/MBR partition table and reading both.

Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
[trini: Add this on the other sandbox configs]
Signedd-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-07-17 16:19:47 -04:00
Simon Glass
b8956425d5 x86: Switch QEMU over to use the bochs driver
This is more convenient since it does not require a video BIOS. Enable
it for QEMU.

Also drop use of video in SPL for the 64-bit QEMU, since it not needed
now.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-07-17 17:23:15 +08:00
Simon Glass
24e7c3e9fc x86: Enable useful options for qemu-86_64
This build can be used to boot standard distro builds, since these are
mostly 64-bit these days. Enable some more options, so that all possible
EFI UUIDs are decoded, we get a proper printf() in SPL, can search
memory for tables, support the full set of standard-boot features, have
full logging and can boot from CDROM media.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-07-17 17:12:26 +08:00
Simon Glass
fa5e203092 x86: Enable display for QEMU 64-bit
Enable the various options needed for display to work on the qemu-x86_64
board. This includes expanding the available malloc() memory in SPL,
since the PCI bus must be enumerated in order to find the video device.

It also includes enabling a bloblist, so that the video parameters can be
passed. This is placed at address 10000 but is not needed after U-Boot
proper reads the information there.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-07-17 17:12:26 +08:00
Simon Glass
3693d34895 x86: coral: Adjust various config options
Add ms so it is easier to search for tables in memory.

Expand the command-line and print buffers so that we can deal with the
very long ChromeOS command lines. (typically 700 characters).

Enable BOOTSTD_FULL to get the full set of standard-boot options.

Replace the existing manual script with 'bootflow scan', since it can
find and boot the OS.

Finally, expand the malloc() space so we can read large kernels into a
bootflow.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-07-17 13:38:35 +08:00
Simon Glass
3a01d702f7 x86: coreboot: Adjust various config options
Drop IDE and add NVME since this is more common now.

Add ms so it is easier to search for tables in memory.

Expand the command-line and print buffers so that we can deal with the
very long ChromeOS command lines. (typically 700 characters).

Enable BOOTSTD_FULL to get the full set up standard-boot options.

Finally, expand the malloc() space so we can read large kernels into a
bootflow.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-07-17 13:38:35 +08:00
Simon Glass
c88d67d021 bootstd: Add a simple bootmeth for ChromiumOS
It is possible to boot x86-based ChromeOS machines by parsing a table and
locating the kernel and command line. Add a bootmeth for this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-07-17 13:38:35 +08:00
Simon Glass
63b7ccbf9f x86: qemu: Switch to standard boot
Drop use of the distro boot script and use standard boot instead.

Moving to a text-based environment would be desirable also, but requires
additional work.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-07-17 13:38:35 +08:00
Simon Glass
1e5ff88657 x86: qemu: Create a little more room for U-Boot
We want to enable some of the more interesting bootstd features. Move SPL
up to create some room for the larger U-Boot binary. Also disable
microcode since this is not needed

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-07-17 13:38:35 +08:00
Peter Robinson
10de125707 disable NFS support by default
While NFS is widely used in data centres, and private
networks it's quite a nuanced usecase for device firmware.
A lot of devices already disable it.

Various network protocols should really be opt in, not opt
out, because they add extra size and are potential attack
vectors from a security PoV. In the NFS case it doesn't
really make sense for a lot of devices like tables, SBCs etc.
It's also something we don't really want for SystemReady-IR
due to security concerns.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2023-07-14 15:21:07 -04:00
Jim Liu
094311192b board: nuvoton: arbel: change uboot load address
use new memory layout and change uboot load address.
open tpm, tee and more config feature

No need to reserve top memory because the reserved space
is moved to the bottom area of memory.

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
2023-07-14 15:21:07 -04:00
Jim Liu
e0a1c81cd8 ARM: config: Enable config to decompress the FIT image
Enable FIT and SHA config to decompress the kernel image

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
2023-07-14 15:21:07 -04:00
Simon Glass
a0874dc4ac expo: Add a configuration editor
Add a new 'cedit' command which allows editing configuration using an
expo. The configuration items appear as menus on the display.

This is extremely basic, only supporting menus and not providing any way
to load or save the configuration.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-07-14 12:54:51 -04:00
Tom Rini
c990ecba4d Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvell
- mvebu: Thecus: Misc enhancement and cleanup (Tony)
- mvebu: Add AC5X Allied Telesis x240 board support incl NAND
  controller enhancements for this SoC (Chris)
2023-07-13 20:38:50 -04:00
Tom Rini
f6da5e9273 u-boot-imx-20230713
-------------------
 
 Merge for 2023.10.
 
 CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/16888
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCZK/m8A8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76ZuIwCglKZeAdyoF4Y3mFGLQsl5woOCqIkAn2bJdqnA
 cYelsWxQgHWLMNxbNHjG
 =91LJ
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20230713' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

u-boot-imx-20230713
-------------------

Merge for 2023.10.

CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/16888
2023-07-13 20:38:24 -04:00
Chris Packham
4c97c4b590 arm: mvebu: Add Allied Telesis x240 board
The x240 and SE240 are a series of L2+ switches from Allied Telesis.
There are a number of them in the range but as far as U-Boot is
concerned all the CPU block components are the same so there's only one
board defined.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2023-07-13 15:53:57 +02:00
Adam Ford
0a4e414360 arm64: imx: imx8mp-beacon: Enable LTO
With LTO enabled, SPL shrinks about 10K and U-Boot shrinks
about 30K.

Signed-off-by: Adam Ford <aford173@gmail.com>
2023-07-13 11:58:18 +02:00
Lukasz Majewski
65648b26c6 config: xea: Disable support for FAT file system
On the XEA (imx287) system the FAT file system is not used neither in
SPL nor u-boot proper.

Hence, to save ~6KiB of u-boot.img size - it has been disabled.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2023-07-13 11:29:41 +02:00
Lukasz Majewski
5386aefb6d config: xea: Disable support for boot methods EXTLINUX and VBE
The XEA system (imx287 based) is not using support for EXTLINUX and VBE.
As those configuration options have been enabled by default with modern
Kconfig it is safe to explicitly disable them.

After that change the u-boot.img size has been reduced by ~16 KiB.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2023-07-13 11:29:41 +02:00
Fabio Estevam
e713364f36 mx23_olinuxino: Convert to CONFIG_DM_SERIAL
The conversion to CONFIG_DM_SERIAL is mandatory, so select this option.

Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-07-13 11:29:41 +02:00
Fabio Estevam
9a38d889a1 mx23evk: Convert to CONFIG_DM_SERIAL
The conversion to CONFIG_DM_SERIAL is mandatory, so select this option.

Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-07-13 11:29:41 +02:00
Fabio Estevam
68bad63ee0 mx28evk: Convert to CONFIG_DM_SERIAL
The conversion to CONFIG_DM_SERIAL is mandatory, so select this option.

Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-07-13 11:29:41 +02:00
Andrejs Cainikovs
ce2cf345f7 configs: verdin-imx8mp: enable spl_gpio_hog
Enable CONFIG_SPL_GPIO_HOG option to be able to control GPIO hogs from
SPL.

Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2023-07-13 11:29:41 +02:00
Andrejs Cainikovs
5e161626f9 configs: verdin-imx8mm: enable spl_gpio_hog
Enable CONFIG_SPL_GPIO_HOG option to be able to control GPIO hogs from
SPL.

Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2023-07-13 11:29:40 +02:00
Hugo Villeneuve
1b4c3e6125 imx8mn-var-som: adjust PHY reset gpios according to hardware configuration
For SOM with the EC configuration, the ethernet PHY is located on the
SOM itself, and connected to the CPU ethernet controller. It has a
reset line controlled via GPIO1_IO9. In this configuration, the PHY
located on the carrier board is not connected to anything and is
therefore not used.

For SOM without EC configuration, the ethernet PHY on the carrier
board is connected to the CPU ethernet controller. It has a reset line
controlled via the GPIO expander PCA9534_IO5.

The hardware configuration (EC) is determined at runtime by
reading from the SOM EEPROM.

To support both hardware configurations (EC and non-EC), adjust/fix
the PHY reset gpios according to the hardware configuration
read at runtime from the SOM EEPROM. This adjustement is done in
U-Boot (OF_BOARD_FIXUP) and kernel (OF_BOARD_SETUP) device trees.

Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
2023-07-13 11:29:40 +02:00
Luca Ellero
e7ff54d963 imx93_evk: defconfig: add adc support
iMX93 ADC features:
    - 4 channels
    - 12 bit resolution

Signed-off-by: Luca Ellero <l.ellero@asem.it>
2023-07-13 11:29:40 +02:00
Tim Harvey
c8645e7411 configs: imx8m: Prepare imx8m-venice boards for HAB support
In order to enable HAB, FSL_CAAM, ARCH_MISC_INIT and
SPL_CRYPTO should be enabled in Kconfig like other i.MX8M
boards.

This also needs to occur in the SPL so enable CONFIG_SPL_BOARD_INIT and
add a void spl_board_init function which calls arch_misc_init to probe
the CAAM driver.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2023-07-13 11:29:40 +02:00
Teresa Remmet
e064fe4f37 configs: phycore-imx8mm_defconfig: Enable LTO
Enable LTO for binary size reduction.

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
2023-07-13 11:29:40 +02:00
Teresa Remmet
b70a1686c8 configs: phycore-imx8mp_defconfig: Enable LTO
Enable LTO for binary size reduction.

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
2023-07-13 11:29:40 +02:00
Camelia Groza
6d249769c5 configs: T1024RDB: enable DM_SERIAL
As the serial devices are configured in the device tree, enable
DM_SERIAL in the non-SPL T1024RDB defconfigs.

Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-07-13 16:55:01 +08:00
Camelia Groza
e5dd02cb30 configs: T1042D4RDB: enable DM_SERIAL
As the serial devices are configured in the device tree, enable
DM_SERIAL in the non-SPL T1042D4RDB defconfigs.

Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-07-13 16:54:50 +08:00
Camelia Groza
8cdf82a3e7 configs: T4240RDB: enable DM_SERIAL
As the serial devices are configured in the device tree, enable
DM_SERIAL in the non-SPL T4240RDB defconfig.

Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-07-13 16:54:35 +08:00
Camelia Groza
2a72af59c0 configs: T2080RDB: enable DM_SERIAL
As the serial devices are configured in the device tree, enable
DM_SERIAL in the non-SPL T2080RDB defconfigs.

Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-07-13 16:54:22 +08:00
Yixun Lan
12d02bba55 configs: th1520_lpi4a_defconfig: Add initial config
Add basic config for Sipeed Lichee PI 4A board which make it capable of
booting into serial console.

Reviewed-by: Wei Fu <wefu@redhat.com>
Signed-off-by: Yixun Lan <dlan@gentoo.org>
2023-07-12 13:21:41 +08:00
Yanhong Wang
99f3a43d1c configs: starfive: Enable ID EEPROM configuration
Enabled ID_EEPROM and I2C configuration for StarFive VisionFive2 board.

Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com>
Reviewed-By: Leo Yu-Chi Linag  <ycliang@andestech.com>
2023-07-12 13:21:40 +08:00
Yanhong Wang
ed430fe5e4 configs: starfive: Enable ethernet configuration for StarFive VisionFive2
Enable DWC_ETH_QOS and PHY_MOTORCOMM configuration to support ethernet
function for StarFive VisionFive 2 board,including versions 1.2A and
1.3B.

Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-07-12 13:21:40 +08:00
Yanhong Wang
9b7060bd15 riscv: dts: jh7110: Combine the board device tree files of 1.2A and 1.3B
The difference between 1.2A and 1.3B is dynamically configured according
to the PCB version, and there is no difference on the board device tree,
so the same DT file can be used.

Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-07-12 13:21:40 +08:00
Tim Harvey
48c6f9777c board: gateworks: venice: add imx8mp-gw7905-2x support
The Gateworks imx8mp-venice-gw7905-2x consists of a SOM + baseboard.

The GW702x SOM contains the following:
 - i.MX8M Plus SoC
 - LPDDR4 memory
 - eMMC Boot device
 - Gateworks System Controller (GSC) with integrated EEPROM, button
   controller, and ADC's
 - PMIC
 - SOM connector providing:
  - eQoS GbE MII
  - 1x SPI
  - 2x I2C
  - 4x UART
  - 2x USB 3.0
  - 1x PCI
  - 1x SDIO (4-bit 3.3V)
  - 1x SDIO (4-bit 3.3V/1.8V)
  - GPIO

The GW7905 Baseboard contains the following:
 - GPS
 - microSD
 - off-board I/O connector with I2C, SPI, GPIO
 - EERPOM
 - PCIe clock generator
 - 1x full-length miniPCIe socket with PCI/USB3 (via mux) and USB2.0
 - 1x half-length miniPCIe socket with USB2.0 and USB3.0
 - USB 3.0 HUB
 - USB Type-C with USB PD Sink capability and peripheral support
 - USB Type-C with USB 3.0 host support

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2023-07-11 14:40:05 +02:00
Adam Ford
7131514ca6 imx: imx8mn-beacon: Move environment definition to env file
Instead of cluttering up a header file with a bunch of defines,
move the default environmental variables to a file called
imx8mn_beacon.env and reference it from the defconfigs.

Signed-off-by: Adam Ford <aford173@gmail.com>
2023-07-11 14:40:05 +02:00
Adam Ford
b2d8d6e625 imx: imx8mm-beacon: Move environment definition to env file
Instead of cluttering up a header file with a bunch of defines,
move the default environmental variables to a file called
imx8mm_beacon.env and reference it from the defconfig.

Signed-off-by: Adam Ford <aford173@gmail.com>
2023-07-11 14:40:05 +02:00
Hugo Villeneuve
26f4bfae73 imx8mn-var-som: fix non-applied PHY reset-gpios properties
Select DM_ETH_PHY so that the reset-gpios property of the ethphy node
can be used.

Also select DM_PCA953X, which is needed for resetting the
ethernet PHY on the carrier board via the PCA9534 I/O expander.

Commit 4e5114daf9 ("imx8mn: synchronise device tree with linux") did
synchronise device tree with linux, which in effect removed obsolete
PHY reset properties and replaced them with new mdio DM
properties. But the commit didn't activate DM_ETH_PHY or DM_PCA953X.

Fixes: 4e5114daf9 ("imx8mn: synchronise device tree with linux")

Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
2023-07-11 14:40:04 +02:00
Hugo Villeneuve
fc1b8e1e7e imx8mn-var-som: read and print SoM infos from eeprom on startup
Enable support to read and display configuration/manufacturing infos
from 4Kbit EEPROM located on SOM board.

Note: CONFIG_DISPLAY_BOARDINFO is automatically selected for ARM arch.

Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
2023-07-11 14:40:04 +02:00
Lukasz Majewski
72235cd96a config: xea: Enable DM_SERIAL for the XEA - single binary (SB) u-boot
The single binary version of u-boot for XEA board is used to debrick and
factory programming.

The produced u-boot.sb is a single file, which allows having fully
operational u-boot prompt loaded with imx287 ROM.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2023-07-11 14:40:04 +02:00
Lukasz Majewski
de27953c29 config: xea: Enable DM_SERIAL for the XEA (imx287 based) board
The XEA board now supports the DM_SERIAL feature in u-boot.

The SPL is using the SPL_OF_PLATDATA - i.e. NOT SPL_DM_SERIAL to
reduce the overall size of the SPL binary.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2023-07-11 14:40:04 +02:00
Lukasz Majewski
11194c0d11 defconfig: xea: Change default spi-nor memory bus to 2
After the re-sync with Linux kernel (v6.0) of the XEA DTS
(SHA1: 7d08ddd09b) the alias
for SPI bus, to which SPI-NOR  memory is connected, has changed from
'spi3' to 'spi2'.

To be in sync with current u-boot's xea dts, the default bus number
(which allows running 'sf probe' without any extra parameters given)
has been adjusted.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2023-07-11 14:40:04 +02:00
Lukasz Majewski
e7c1c0811b arm: config: Adjust imx287 based XEA board PMU configuration
This patch adjusts XEA's PMU setup as this board is supposed to be
mainly powered from DCDC_BATT source.

Moreover, in this HW design the VDD_4P2 is not used as well.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2023-07-11 14:40:03 +02:00
Tim Harvey
13897ff6d9 board: gateworks: venice: move env location
To allow U-Boot to fit within emmc boot partitions move the env from
just under 16MiB to just under 4MiB as some emmc devices used on venice
boards have 4MiB boot partitions. This still leaves plenty of room for
U-Boot.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2023-07-11 14:40:03 +02:00
Tim Harvey
c226f84256 board: gateworks: venice: add eraseenv command
Add eraseenv command and remove the unnecessary env command.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2023-07-11 14:40:03 +02:00
Tim Harvey
8849cc7bd9 board: gateworks: venice: add GPIO name lookup
Add GPIO name lookup so that you can act on GPIO's by name vs controller
id:

Before:
u-boot=> gpio input pci_wdis#
GPIO: 'pci_wdis#' not found
Command 'gpio' failed: Error -22

After:
u-boot=> gpio input pci_wdis#
gpio: pin pci_wdis# (gpio 103) value is 1

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2023-07-11 14:40:03 +02:00
Sergio Prado
7a63432e9d configs: verdin-imx8mp: enable ARCH_MISC_INIT
This is required to boot a FIT image, otherwise the caam_jr driver is
not initialized and the hash verification fails with the following
error:

Verifying Hash Integrity ... sha256dev_get_priv: null device
CAAM was not setup properly or it is faulty

Signed-off-by: Sergio Prado <sergio.prado@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2023-07-11 14:40:03 +02:00
Adam Ford
cacf0f8a19 configs: imx: imx8mm_beacon: Add config option for QSPI booting
The imx8mm_beacon SOM has a QSPI part attached to the FSPI controller.
Update the header and spl files to support booting from NOR flash and
add imx8mm_beacon_fspi_defconfig to support this configuration.

Signed-off-by: Adam Ford <aford173@gmail.com>
2023-07-11 14:40:02 +02:00
Tom Rini
76c61f29d6 Merge tag 'fsl-qoriq-2023-7-6' of https://source.denx.de/u-boot/custodians/u-boot-fsl-qoriq into next
Enable DM Serial for ls1043ardb and ls1046ardb/afrwy
Fixed secure boot on LS-CH2 platforms
2023-07-09 21:54:40 -04:00
Michal Simek
99a0532a2d sysreset: Change Kconfig GPIO dependency
DM_GPIO depends on GPIO to be enabled but select will cause that DM_GPIO is
selected without GPIO which ends up in compilation error:
undefined reference to `dm_gpio_set_value'
undefined reference to `dm_gpio_get_value'
undefined reference to `dm_gpio_free'
undefined reference to `gpio_request_by_name'

Signed-off-by: Michal Simek <michal.simek@amd.com>
[trini: Fix configs which had relied on these select's]
Signed-off-by: Tom Rini <trini@konsulko.com>
2023-07-07 16:47:15 -04:00
Conor Dooley
5566cf2a6d riscv: dts: drop microchip from dts filenames
The original names picked for the DT doesn't match Linux's naming scheme
and it was renamed there a while ago. Rename it in U-Boot to allow
easily syncing dts between the two projects.

Reviewed-by: Rick Chen <rick@andestech.com>
Reviewed-by: Padmarao Begari <padmarao.begari@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2023-07-06 17:28:08 +08:00
Camelia Groza
44231a24d4 configs: ls1046afrwy: enable DM_SERIAL
As the serial devices are configured in the device tree, enable
DM_SERIAL in the ls1046afrwy defconfigs.

Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2023-07-06 13:04:55 +08:00
Camelia Groza
818cbd8ebb configs: ls1046ardb: enable DM_SERIAL
As the serial devices are configured in the device tree, enable
DM_SERIAL in the ls1046ardb defconfigs.

Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2023-07-06 13:04:55 +08:00
Camelia Groza
3240f090fd configs: ls1043ardb: enable DM_SERIAL
As the serial devices are configured in the device tree, enable
DM_SERIAL in the ls1043ardb defconfigs.

Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2023-07-06 13:04:55 +08:00
Tom Rini
e80f4079b3 Prepare v2023.07-rc6
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAmSjExsACgkQFHw5/5Y0
 tywJ3gwAsTbr9mCmCzaKs2F/Jh6H47WEUMEz96wE8eXwuS57pfNJhml4v2rEhYpQ
 MlBjz6vTOyHDrtinRlvempJWVZEuoflMb6M2OTqVFqZPuPT3cLLuSdM4pgb5SdKS
 jNDWcxr12LqiDS0Mz+QOHdps3H8mzsCnOXeOTT+VaSeYHPOLQ+M9OV2o/aY2BsNi
 JLAGX+8i7FuZnVYZzSv6PQYYGZZV+Kvl5oLlPPJttsA7bGu4m2k8zRQQdzd+PIbu
 owAh3CHSKCy1g+y7ASn1Nd2VE06huvqGG7Qo2sj+Ypf/wbNy16qbMc2C7HDwDcul
 nrnf6BZ+MTelwxyPHBOR52ERgY6H8rgpvsCNL0arxaCHJOVddXtrUY1591vE71aB
 nGxhnyLnHwOXXdDGsPsR7p4SF16e6RzaINKmDorQ37nidRnTFLlFCxidnR8ztscR
 aUpLraqYUquGJf7lejYX2OZg2f36lvpYKy1lwuJfd9fUSgK8iyUKrE9wOJhWnTK8
 cIOnS/A+
 =DNor
 -----END PGP SIGNATURE-----

Merge tag 'v2023.07-rc6' into next

Prepare v2023.07-rc6
2023-07-05 11:28:55 -04:00
Jonas Karlman
e37650846f rockchip: Restore support for boot scripts in legacy image format
Use of CONFIG_SPL_FIT_SIGNATURE=y cause CONFIG_LEGACY_IMAGE_FORMAT=n as
default, this prevent boot scripts in legacy image format from working
and was an unintended change in the listed fixes commits:

  Wrong image format for "source" command

Add CONFIG_LEGACY_IMAGE_FORMAT=y to defconfig for affected boards to
restore support for boot scripts in legacy image format.

Fixes: 3bf8e40807 ("board: rockchip: add Radxa ROCK5B Rk3588 board")
Fixes: cf777572ca ("rockchip: rockpro64: Use SDMA to boost eMMC performance")
Fixes: 6e2b8344d6 ("rockchip: rock-pi-4: Use SDMA to boost eMMC performance")
Fixes: 1bf49d5a4a ("rockchip: rk3566-radxa-cm3-io: Update defconfig")
Fixes: 703c170b40 ("rockchip: rk3568-evb: Update defconfig")
Fixes: 68000f750a ("rockchip: rk3568-rock-3a: Update defconfig")
Fixes: 6fb02589a6 ("rockchip: rk3588-evb: Update defconfig")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
2023-07-03 10:20:13 -04:00
Svyatoslav Ryhel
bdf9dead86 board: htc: endeavoru: add One X support
The HTC One X is a touchscreen-based, slate-sized smartphone
designed and manufactured by HTC that runs the Android operating
system. The One X features a 4.7" display, an Nvidia Tegra 3
quad-core chip, 1 GB of RAM and non-extendable 32 GB of internal
storage. UART-A is default debug port.

Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com>
Tested-by: Ion Agorria <ion@agorria.com>
Tested-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2023-06-30 15:20:37 +02:00
Svyatoslav Ryhel
623a8c812e board: lg: x3: add Optimus 4X HD and Optimus Vu support
LG X3 is a development board based on Nvidia Tegra 3 SoC
on base of which Optimus 4X HD and Optimus Vu were created.
Both smartphones feature a 4.7" and 5" panels respectively,
an Nvidia Tegra 3 quad-core chip, 1 GB of RAM and 16/32 GB
of internal storage. Optimux 4X HD additionally has a micro
SD slot.

Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # LG P880 T30
Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # LG P895 T30
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2023-06-30 15:20:37 +02:00
Svyatoslav Ryhel
855ffdfa65 board: asus: grouper: add Google Nexus 7 (2012) support
Nexus 7 is a mini tablet computer co-developed by Google and Asus
that runs the Android operating system. The Nexus 7 features a 7"
display, an Nvidia Tegra 3 quad-core chip, 1 GB of RAM and 8/16 GB
of internal storage.

This patch brings support for all 3 known ASUS/Google devices:
- Nexus 7 (2012) E1565
- Nexus 7 (2012) PM269
- Nexus 7 (2012) 3G - tilapia

Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # ASUS Grouper E1565
Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # ASUS Grouper E1565
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2023-06-30 15:20:37 +02:00
Svyatoslav Ryhel
15be9a7b3b board: asus: transformer: add ASUS Transformer T30 family support
The ASUS Transformer T30 family are 2-in-1 detachable tablets
and AiO developed by ASUS that run the Android operating system
(TF600T runs Windows RT and P1801-T runs Android and Windows).
The T30 Transformers feature a 10.1-inch display (apart P1801-T),
an Nvidia Tegra 3 quad-core chip, 1/2 GB of RAM, and 16/32 GB of
storage. Transformers board derives from Nvidia Cardhu development
board.

This patch brings support for 7 known Transformer devices:
- ASUS Transformer Prime TF201
- ASUS Transformer Pad TF300T/TF300TG/TF300TL
- ASUS VivoTab RT TF600T (Windows RT based)
- ASUS Transformer Infinity TF700T
- ASUS Portable AiO P1801-T

Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # all devices
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2023-06-30 15:20:37 +02:00
Ken Sloat
dbdf4a06ec board: freescale: imx93_evk: Fix MMC environment offset boot conflict.
Currently, the imx93_evk is configured with CONFIG_ENV_IS_IN_MMC and the
chosen environment offset in the config is 0x400000. Unless the user
programs the associated fuses, this offset is the default secondary boot
image offset used by the i.MX 93 ROM bootloader. With certain
combinations of environmental variables, the CRC and beginning of the
environment can potentially falsely appear as a valid boot image
container header. If the expected "sw_version" offset within this
mistaken boot image container is greater than the primary's, the ROM
bootloader can skip booting of the primary image altogether and attempt
to boot with the content of the environment data. This will then hang
the system.

To fix this, move the environment from 0x400000 to 0x700000 reserving up
to 3 MB at 0x400000 for any actual secondary user image container.

Signed-off-by: Ken Sloat <ken.s@variscite.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2023-06-29 09:55:45 -04:00
Ferass El Hafidi
48132951c9 boards: amlogic: add KII Pro defconfig
Add configurations for the Videostrong KII Pro set-top box.
This defconfig is cloned from the WeTek Play2's.

Signed-off-by: Ferass El Hafidi <vitali64pmemail@protonmail.com>
Link: https://lore.kernel.org/r/20230507124109.31778-3-vitali64pmemail@protonmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-06-28 10:05:34 +02:00
Igor Prusov
1f0d2e870d board: amlogic: add support for AD401 board
The AD401 board is the Amlogic A1 SoC reference board

Signed-off-by: Igor Prusov <ivprusov@sberdevices.ru>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230505125639.3605-6-ivprusov@sberdevices.ru
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-06-28 10:05:34 +02:00
Tom Rini
9c08294424 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-06-26 11:43:56 -04:00
Eduard Strehlau
4347dec6b2 smegw01: Fix duplicate bootcmd
Two conflicting bootcmds were included in the environment.
Streamline to defining the bootcmd only in the env file.

Signed-off-by: Eduard Strehlau <eduard@lionizers.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-06-26 11:30:22 -04:00
Marek Vasut
ae3e3fa570 ARM: at91: Switch sama5d2_icp_mmc to simple malloc in SPL
To avoid SRAM overflow in the SPL build, use simple malloc implementation.

Signed-off-by: Marek Vasut <marex@denx.de>
2023-06-24 13:46:57 -04:00
Thierry Reding
e55448c780 ARM: tegra: Enable poweroff command on Jetson TX2
This command is useful to power off the system from within U-Boot.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Tom <twarren@nvidia.com>
2023-06-23 13:43:48 +02:00
Thierry Reding
9c2f454647 ARM: tegra: Enable poweroff command on Jetson TX1 and Jetson Nano
This command is useful to power off the system from within U-Boot.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Tom <twarren@nvidia.com>
2023-06-23 13:43:48 +02:00
Vignesh Raghavendra
1b086da5cd configs: am64x_evm_*_defconfig: Enable High Secure device support
Enable CONFIG_TI_SECURE_DEVICE to support booting High Secure(HS)
variants of AM64x SoC.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-06-20 16:08:13 -04:00
Masahisa Kojima
7f8062b7e5 configs: synquacer: increase SYS_MALLOC_F_LEN
DM_FLAG_PRE_RELOC flag is added into some drivers
by recent commits such as
1bd790bc4b ("firmware: psci: enable DM_FLAG_PRE_RELOC").
Current SYS_MALLOC_F_LEN of SynQuacer Developerbox platform
is too small, Developerbox will not boot due to lack of
heap memory.

This commit increases the size of heap memory.

Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Jassi Brar <jaswinder.singh@linaro.org>
2023-06-20 16:08:13 -04:00
Rui Miguel Silva
3e41ebaa46 corstone1000: add nvmxip, fwu-mdata and gpt options
Enable the newest features: nvmxip, fwu-metadata and
gpt. Commands to print the partition info, gpt info
and fwu metadata will be available.

Adjust also env boot script the address of the
bootbank with the new gpt layout, and also remove
the not needed kernel address bank0 and bank1
and retrieve function that would test the bank flag
before and now we are getting the info from the fwu
metadata.

Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
2023-06-19 14:34:16 -04:00
Rui Miguel Silva
17c744c3ea corstone1000: set kernel_addr based on boot_idx
We need to distinguish between boot banks and from which
partition to load the kernel+initramfs to memory.

For that, fetch the boot index, fetch the correspondent
partition, calculate the correct kernel address and
then set the env variable kernel_addr with that value.

Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
2023-06-19 14:34:16 -04:00
Patrick Delaunay
2df7fc0824 configs: stm32mp1: reduce DDR_CACHEABLE_SIZE to supported 256MB DDR
Reduces the CONFIG_DDR_CACHEABLE_SIZE, the size of DDR mapped cacheable
before relocation, to support DDR with only 256MB because the OP-TEE
reserved memory is located at end of the DDR.

By default the new size of 128MB cacheable memory is enough
in dram_bank_mmu_setup() for early_enable_caches() in arch_cpu_init()
and is correct for DDR size = 256MB.

After relocation the real size of DDR, excluding the no-map reserved
memory, is used after the U-Boot device tree parsing.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-06-16 11:16:31 +02:00
Tom Rini
2d158d3c38 ARM: stm32: Fix OF_LIST on DHCOR
The ITS file used to build the images here lists three dtb files as
being used. Today, these are built by the logic that will over-build dtb
files based on SOC/etc symbols being set. To future proof this platform
and be generally correct, we list all 3 of the device trees used here in
OF_LIST.

Cc: Marek Vasut <marex@denx.de>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2023-06-16 11:12:06 +02:00
Patrick Delaunay
d3126a3293 config: stm32mp15: remove CONFIG_FASTBOOT_CMD_OEM_FORMAT
Remove the support of the fastboot "oem format" command for STM32MP15x
boards and removed the associated env variable "partitions".
This command is not required; with fastboot tool, the GPT partition can
be handle with "flash" command in "gpt" target (=CONFIG_FASTBOOT_GPT_NAME),
for example: fastboot flash gpt gpt.bin

This patch avoids to define the GPT partitioning in U-Boot environment,
which is incompatible with planned modifications, for example to
support TF-A firmware update.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-06-16 11:05:15 +02:00
Patrick Delaunay
30a93729bb config: stm32mp15: remove CONFIG_FASTBOOT_USB_DEV
The CONFIG_FASTBOOT_USB_DEV is used to select USB OTG controller other
than 0 but it is not the case for STM32MP15 boards; it can be removed
to simplify the STM32MP15 defconfig files.

On STM32MP15x boards, we have only one USB device with instance 0,
so the device is hardcoded arch/arm/mach-stm32mp/cpu.c with
the command "fastboot 0" and this define is not used in config files
(include/configs/stm32mp15_st_common.h).

Fixes: 4633fd51c5 ("stm32mp1: activate FASTBOOT on eMMC")
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-06-16 11:05:15 +02:00
Patrick Delaunay
90f992e6a5 arm: dts: stm32: Add partitions in flash0 and nand node for stm32mp15xx-dhcom/dhcor
Add partitions subnode in flash0 for stm32mp157xx-dhcom/dhcor boards.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-06-16 11:01:16 +02:00
Patrice Chotard
df197e2aa0 configs: stm32mp1: disable CMD_MTDPARTS
Disable CMD_MTDPARTS as it's no more needed and it is strongly
encouraged to avoid using this command anymore.
(see comments in ./cmd/Kconfig:2422).

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-06-16 11:01:16 +02:00
Patrick Delaunay
8a8efacf5f board: stm32mp1: use fdt_copy_fixed_partitions
Copy the fixed partition nodes from U-Boot device tree to Linux kernel
device tree to dynamically configure the MTD partitions.

fdt_copy_fixed_partitions is only based on device tree
and replace the function fdt_fixup_mtdparts based on mtdparts variable;
the variable mtdid and mtdparts are not more required.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-06-16 11:01:16 +02:00
Patrice Chotard
6cf8888541 configs: stm32mp: Disable SYS_MTDPARTS_RUNTIME for stm32mp15 and stm32mp13
As we don't use anymore MTDPARTS_xx Kconfig variables
(MTDPARTS_NAND0_BOOT, MTDPARTS_NOR0_BOOT...),
disable SYS_MTDPARTS_RUNTIME.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-06-16 11:01:16 +02:00
Patrice Chotard
e91d3c6176 arm: dts: stm32: Add partitions in flash0 and nand node for stm32mp15xx-ev1
Add partitions subnode in flash0 and nand nodes for all stm32mp157xx-ev1
boards. Update only the file stm32mp157c-ev1-*u-boot.dtsi, included by
other files  stm32mp15*-ev1-*-u-boot.dtsi.

For SCMI variant of device tree used with stm32mp15_defconfig
add partitions needed by TF-A firmware update:
- metadata to save the TF-A information: 2 copy
- fip-a / fip-b: two FIP slots, used for system A/B (seamless) update
- the previous "fsbl" partition with 2 copy of TFA is replaced
  by 2 partitions (only one copy in each MTD partition) to simplify
  the update: no need to managed this copy on update, need to update the
  two partition (skip bad block for NAND)
The offset for ENV partition are also updated in stm32mp15_defconfig

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-06-16 11:01:16 +02:00
Camelia Groza
b824212dc2 configs: ls1046afrwy: enable DM_MDIO and DM_CMD
With DM_ETH configured by default, complete the Ethernet enablement for
LS1046AFRWY by activating DM_MDIO.

Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-06-15 17:58:53 +08:00
Peter Robinson
70ca9f62f3 rockchip: Pinephone Pro: Add DDR RAM type config
Add the RAM_ROCKCHIP_LPDDR4 to fix the Pinephone Pro booting.
When the configs were updated in 26f92be07e it somehow broke
the PPP boot process so let's fix it.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
CC: Jagan Teki <jagan@edgeble.ai>
CC: Kever Yang <kever.yang@rock-chips.com>
2023-06-14 15:48:45 -04:00
Tom Rini
260d4962e0 Merge tag v2023.07-rc4 into next
Signed-off-by: Tom Rini <trini@konsulko.com>
2023-06-12 14:55:33 -04:00
Marek Vasut
32d2461e04 ARM: renesas: Enable DM_ETH_PHY and SMSC PHY driver
The board comes with SMSC LAN8710A PHY, enable matching driver.
Enable DM_ETH_PHY in the process to start using DM drivers more.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
---
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Michal Simek <michal.simek@amd.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
2023-06-10 13:34:06 +02:00
Jassi Brar
6b403ca4dc fwu: DeveloperBox: add support for FWU
Add code to support FWU_MULTI_BANK_UPDATE.
The platform does not have gpt-partition storage for
Banks and MetaData, rather it used SPI-NOR backed
mtd regions for the purpose.

Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2023-06-09 13:52:40 -04:00
Jassi Brar
87f397e58e config: developerbox: move to new flash layout and boot flow
Towards enabling FWU and supporting new firmware layout in NOR flash,
make u-boot PIC and adjust uboot env offset in flash.

Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2023-06-09 13:52:40 -04:00
Valentine Barshak
ed2f65f010 ARM: renesas: Add R8A77980 V3HSK board and CPLD code
Add board code for the R8A77980 V3HSK board.
Add CPLD sysreset driver to the R-Car V3H SK board.
Extracted from a larger patch by Valentine Barshak.

Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Tam Nguyen <tam.nguyen.xa@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[Marek: Sync configs and board code with V3H Condor, squash CPLD driver in]
2023-06-08 22:26:52 +02:00
Valentine Barshak
5f4e26964c ARM: renesas: Add R8A77970 V3MSK board and CPLD code
Add board code for the R8A77970 V3MSK board.
Add CPLD sysreset driver to the R-Car V3M SK board.
Extracted from a larger patch by Valentine Barshak.

Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Tam Nguyen <tam.nguyen.xa@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[Marek: Sync configs and board code with V3M Eagle, squash CPLD driver in]
2023-06-08 22:26:52 +02:00
Andre Przywara
b0816e3bd3 sunxi: defconfig: Add Lctech Pi F1C200s board
The Lctech Pi F1C200s (also previously known under the Cherry Pi brand)
is a small development board with the Allwinner F1C200s SoC. This is the
same as the F1C100s, but with 64MB instead of 32MB co-packaged DRAM.

Add a defconfig for this board, enabling the most basic features. This
uses the new 64MB memory map, which avoids the very tight memory map we
use for the 32MB F1C100s board(s).
The devicetree file is already in the tree, courtesy of the previous
Linux repo sync.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2023-06-07 22:44:40 +01:00
Yegor Yefremov
e0feee58ac arm: baltos: switch to CONFIG_DM_I2C
Also use the TPS65910 driver directly.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2023-06-01 12:40:16 -04:00
Udit Kumar
0eade94f80 configs: j7200: correct mmc offset
This patch corrects the MMC raw mode sector offset.

Current allocated size for tiboot3 is 1MB and 2MB for tispl.

Without this correct offset eMMC boot will fail.

Fixes: f8c1e893c8 (configs: j7200_evm_a72: Add Initial suppot)
Fixes: 02dff65efe (configs: j7200_evm_r5: Add initial support)
Fixes: 360c7f46f3 (configs: Add configs for J7200 High Security EVM)

Way to test with eMMC boot from boot0/1 partition
Boot with SD card, copy images to eMMC boot0 or boot1 partition

=> mmc dev 0 (1 or 2)
=> fatload mmc 1 ${loadaddr} tiboot3.bin
=> mmc write ${loadaddr} 0x0 0x800
=> fatload mmc 1 ${loadaddr} tispl.bin
=> mmc write ${loadaddr} 0x800 0x1000
=> fatload mmc 1 ${loadaddr} u-boot.img
=> mmc write ${loadaddr} 0x1800 0x2000
=> mmc partconf 0 1 (1 or 2) 1
=> mmc bootbus 0 2 0 0

Cc: Bhavya Kapoor <b-kapoor@ti.com>
Cc: Diwakar Dhyani <d-dhyani@ti.com>
Cc: KEERTHY <j-keerthy@ti.com>
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
2023-06-01 12:32:04 -04:00
Vignesh Raghavendra
703da6d707 configs: am62ax_evm_a53_defconfig: Enable YMODEM support at A53 SPL
This is required for UART boot flow where u-boot.img needs to be
downloaded via YMODEM.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
2023-06-01 12:32:03 -04:00
Tom Rini
41e289bb1f arm: Remove ti816x_evm board and ti816x SoC support
This platform is currently unmaintained and untested, so remove it.
Further, as it is the only TI816X SoC example, remove related files as
well.

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-05-31 10:11:46 -04:00
Manorit Chawdhry
6cfdf8270e Kconfig: j721e: Change K3_MCU_SCRATCHPAD_BASE to non firewalled region
In non-combined boot flow for K3, all the firewalls are locked by default
until sysfw comes up. Rom configures some of the firewall for its usage
along with the SRAM for R5 but the PSRAM region is still locked.

The K3 MCU Scratchpad for j721e was set to a PSRAM region triggering the
firewall exception before sysfw came up. The exception started happening
after adding multi dtb support that accesses the scratchpad for reading
EEPROM contents.

The commit changes R5 MCU scratchpad for j721e to an SRAM region.

Old Map:
┌─────────────────────────────────────┐ 0x41c00000
│                 SPL                 │
├─────────────────────────────────────┤ 0x41c40000 (approx)
│                STACK                │
├─────────────────────────────────────┤ 0x41c85b20
│             Global data             │
│  sizeof(struct global_data) = 0xd8  │
├─────────────────────────────────────┤ gd->malloc_base = 0x41c85bfc
│                HEAP                 │
│  CONFIG_SYS_MALLOC_F_LEN = 0x70000  │
├─────────────────────────────────────┤ CONFIG_SPL_BSS_START_ADDR
│               SPL BSS               │ (0x41cf5bfc)
│  CONFIG_SPL_BSS_MAX_SIZE = 0xA000   │
└─────────────────────────────────────┘ CONFIG_SYS_K3_BOOT_PARAM_TABLE_INDEX
			                (0x41cffbfc)

New Map:
┌─────────────────────────────────────┐ 0x41c00000
│                 SPL                 │
├─────────────────────────────────────┤ 0x41c40000 (approx)
│                EMPTY                │
├─────────────────────────────────────┤ 0x41c81920
│                STACK                │
│ SPL_SIZE_LIMIT_PROVIDE_STACK=0x4000 │
├─────────────────────────────────────┤ 0x41c85920
│             Global data             │
│  sizeof(struct global_data) = 0xd8  │
├─────────────────────────────────────┤ gd->malloc_base = 0x41c859f0
│                HEAP                 │
│  CONFIG_SYS_MALLOC_F_LEN = 0x70000  │
├─────────────────────────────────────┤ CONFIG_SPL_BSS_START_ADDR
│               SPL BSS               │ (0x41cf59f0)
│  CONFIG_SPL_BSS_MAX_SIZE = 0xA000   │
├─────────────────────────────────────┤ 0x41cff9fc
│         NEW MCU SCRATCHPAD          │
│  SYS_K3_MCU_SCRATCHPAD_SIZE = 0x200 │
└─────────────────────────────────────┘ CONFIG_SYS_K3_BOOT_PARAM_TABLE_INDEX
			                (0x41cffbfc)

Fixes: ab977c8b91 ("configs: j721s2_evm_r5: Enable support for building multiple dtbs into FIT")

Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
[n-francis@ti.com: SRAM allocation addressing diagram]
Signed-off-by: Neha Francis <n-francis@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Kamlesh Gurudasani <kamlesh@ti.com>
2023-05-30 15:13:43 -04:00
Manorit Chawdhry
8b07082607 configs: j721e: Merge the HS and non-HS defconfigs
K3 devices have runtime type board detection. Make the default defconfig
include the secure configuration. Then remove the HS specific config.

Non-HS devices will continue to boot due to runtime device type detection.
If TI_SECURE_DEV_PKG is not set the build will emit warnings, for non-HS
devices these can be ignored.

Reviewed-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Acked-by: Andrew Davis <afd@ti.com>
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-05-30 15:13:43 -04:00
Tom Rini
c90e18932b configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-05-29 10:43:26 -04:00
Tom Rini
6dcee70692 u-boot-imx-20230525
-------------------
 
 - i.MX93 series
 - Fixes
 
 CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/16412
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCZG8HrQ8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76Zj7ACfRzFvybIZReXEjtdmJH6eyrgRXNAAnisjumty
 4bq+E+hFrWar5kC2iTAa
 =uqqN
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20230525' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

u-boot-imx-20230525
-------------------

- i.MX93 series
- Fixes

CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/16412
2023-05-25 14:27:39 -04:00
Peng Fan
ab2f54d211 imx9: imx93_evk: enable sysreset
Enable sysreset for i.MX93 EVK.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-05-21 16:54:41 +02:00
Peng Fan
54e9cee225 imx9: imx93_evk: Update spl stack & bss base address
As the ddr timing info will be saved at the last 16KB of
the OCRAM, spl stack & bss base should be updated to avoid
conflict.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-05-21 16:54:41 +02:00
Peng Fan
d59b9c38c2 imx9: imx93_evk: add low drive mode support on 11x11 EVK
Add a static u-boot config for i.MX93 low drive mode support. When
low drive mode is enabled, VDD_SOC is set to 0.75V. Bus clocks,
A55 core clock (900Mhz), DDR clock (1866MTS), and some peripherals
clocks (USDHC/FLEXSPI/PDM/DISP_PIX/CAM_PIX) must decrease to meet
max frequencies in low drive mode.

Also set standby voltage for buck1

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-05-21 16:54:41 +02:00
Peng Fan
33866e9409 imx9: imx93_evk: enable CONFIG_WDT
Without this config, there is boot error: Error binding ulp_wdt driver

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-05-21 16:54:40 +02:00
Peng Fan
cdb11eab1e imx9: imx93_evk: select IMX_TMU
Select thermal config to print current temperature

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-05-21 16:54:40 +02:00
Peng Fan
07d225c525 imx9: imx93_evk: enable CPU_IMX
select CONFIG_CPU_IMX to display cpu info

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-05-21 16:54:40 +02:00
Jonas Karlman
fd6e425be2 rockchip: rk3588-rock-5b: Enable boot from SPI NOR flash
Add sfc and flash node to device tree and config options to enable
support for booting from SPI NOR flash on Radxa ROCK 5 Model B.

Similar to RK3568 the BootRom in RK3588 can read all data and look for
idbloader at 0x8000, same as on SD and eMMC.

Use the rksd format and modify the mkimage offset to generate a bootable
u-boot-rockchip-spi.bin that can be written to 0x0 of SPI NOR flash. The
FIT image is loaded from 0x60000.

  => sf probe
  SF: Detected mx25u12835f with page size 256 Bytes, erase size 4 KiB, total 16 MiB

  => load mmc 1:1 10000000 u-boot-rockchip-spi.bin
  1492992 bytes read in 129 ms (11 MiB/s)

  => sf update $fileaddr 0 $filesize
  device 0 offset 0x0, size 0x16c800
  1300480 bytes written, 192512 bytes skipped in 11.103s, speed 137694 B/s

The BROM_BOOTSOURCE_ID value read back when booting from SPI flash does
not match the expected value of 3 (SPINOR) used by other SoCs. Instead a
value of 6 is read back, add a new enum value to handle this new
bootsource id.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Tested-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: Eugen Hristev <eugen.hristev@collabora.com>
2023-05-19 08:50:44 +08:00
Tom Rini
7eac2e46ec configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-05-18 16:05:49 -04:00
Wadim Egorov
14421e875e configs: phycore-rk3288: Enable CONFIG_LTO
The phycore-rk3288 SPL binary is reaching the limits of 32KB very often.
Enable CONFIG_LTO to reduce the size of the SPL and make the board more
future proof for changes increasing the SPL size.

Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-05-18 09:15:52 +08:00
Wolfgang Zarre
63a49240d4 rockchip: Pinebook Pro: Fix emmc default configuration
If u-boot is installed on the internal emmc, then this will
allow to boot without failure.

Signed-off-by: Wolfgang Zarre <lxdev12@zirdeon.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-05-18 08:58:16 +08:00
Jonas Karlman
ec48bcf48c rockchip: rk3588-rock-5b: Update defconfig
Update defconfig for rk3588-rock-5b with new defaults.

Remove the SPL_ROCKCHIP_BACK_TO_BROM=y option, SPL is expected to load
next stage from a FIT image and then jump to next stage not back to
BootRom.

Extend SPL_MAX_SIZE to 0x40000, SPL is loaded to 0x0 and TF-A is loaded
to 0x40000, use the space in between as SPL_MAX_SIZE.

Add config option to include useful gpio cmd.

Remove the CONFIG_NET_RANDOM_ETHADDR=y option, ethaddr and eth1addr is
set based on cpuid read from OTP.

Add CONFIG_SYS_NS16550_MEM32=y to use 32bit access of serial register.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-05-18 08:44:05 +08:00
Jonas Karlman
6fb02589a6 rockchip: rk3588-evb: Update defconfig
Update defconfig for rk3588-evb with new defaults.

Add CONFIG_SPL_FIT_SIGNATURE=y to let SPL verify an auto generated hash
of FIT images. This help indicate if there is an issue loading any of
the images to DRAM or SRAM.

Extend SPL_MAX_SIZE to 0x40000, SPL is loaded to 0x0 and TF-A is loaded
to 0x40000, use the space in between as SPL_MAX_SIZE.

Add config options to include useful gpio and regulator cmd.

Remove the CONFIG_NET_RANDOM_ETHADDR=y option, ethaddr and eth1addr is
set based on cpuid read from OTP.

Remove CONFIG_DEBUG_UART_ANNOUNCE=y to remove debug messages.

Add CONFIG_SYS_NS16550_MEM32=y to use 32bit access of serial register.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-05-18 08:44:05 +08:00
Jonas Karlman
153c87be48 rockchip: rk3588: Select DM_RESET and DM_REGULATOR_FIXED in arch Kconfig
Like other Rockchip SoCs, DM_RESET and DM_REGULATOR_FIXED is useful
across RK3588 platform. Select them from arch Kconfig.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-05-18 08:44:05 +08:00
Jonas Karlman
64f79f88a7 rockchip: rk3568-rock-3a: Enable boot from SPI NOR flash
Add sfc and flash node to device tree and config options to enable
support for booting from SPI NOR flash on Radxa ROCK 3 Model A.

Unlike prior generation SoCs the BootRom in RK3568 can read all data and
look for idbloader at 0x8000, same as on SD and eMMC.

Use the rksd format and modify the mkimage offset to generate a bootable
u-boot-rockchip-spi.bin that can be written to 0x0 of SPI NOR flash. The
FIT image is loaded from 0x60000.

  => sf probe
  SF: Detected mx25u12835f with page size 256 Bytes, erase size 4 KiB, total 16 MiB

  => load mmc 1:1 10000000 u-boot-rockchip-spi.bin
  1384448 bytes read in 119 ms (11.1 MiB/s)

  => sf update $fileaddr 0 $filesize
  device 0 offset 0x0, size 0x152000
  1179648 bytes written, 204800 bytes skipped in 9.901s, speed 143185 B/s

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-05-18 08:44:05 +08:00
Jonas Karlman
674803fe86 rockchip: rk3568-rock-3a: Use pinctrl for sdmmc and sdhci in SPL
Enable pinctrl for sdmmc and sdhci in SPL to support loading of FIT
image from SD and eMMC storage when booting from SPI NOR flash.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-05-18 08:44:04 +08:00
Jonas Karlman
68000f750a rockchip: rk3568-rock-3a: Update defconfig
Update defconfig for rk3568-rock-3a with new defaults.

Remove the SPL_ROCKCHIP_BACK_TO_BROM=y option, SPL is expected to load
next stage from a FIT image and then jump to next stage not back to
BootRom.

Add CONFIG_SPL_FIT_SIGNATURE=y to let SPL verify an auto generated hash
of FIT images. This help indicate if there is an issue loading any of
the images to DRAM or SRAM.

Extend SPL_MAX_SIZE to 0x40000, SPL is loaded to 0x0 and TF-A is loaded
to 0x40000, use the space in between as SPL_MAX_SIZE.

Add config option to include useful gpio cmd.

Remove the CONFIG_NET_RANDOM_ETHADDR=y option, ethaddr and eth1addr is
set based on cpuid read from OTP.

Filter out assigned-clock props with CONFIG_OF_SPL_REMOVE_PROPS,
U-Boot proper will read and configure assigned-clock props.

Remove the CONFIG_SPL_PMIC_RK8XX=y option, the pmic is not used in SPL.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-05-18 08:44:04 +08:00
Jonas Karlman
703c170b40 rockchip: rk3568-evb: Update defconfig
Update defconfig for rk3568-evb with new defaults.

Remove the SPL_ROCKCHIP_BACK_TO_BROM=y option, SPL is expected to load
next stage from a FIT image and then jump to next stage not back to
BootRom.

Add CONFIG_SPL_FIT_SIGNATURE=y to let SPL verify an auto generated hash
of FIT images. This help indicate if there is an issue loading any of
the images to DRAM or SRAM.

Extend SPL_MAX_SIZE to 0x40000, SPL is loaded to 0x0 and TF-A is loaded
to 0x40000, use the space in between as SPL_MAX_SIZE.

Add config options to include useful gpio, i2c, pmic and regulator cmd.

Remove the CONFIG_NET_RANDOM_ETHADDR=y option, ethaddr and eth1addr is
set based on cpuid read from OTP.

Filter out assigned-clock props with CONFIG_OF_SPL_REMOVE_PROPS,
U-Boot proper will read and configure assigned-clock props.

Add config options to enable support for the RK809 PMIC.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-05-18 08:44:04 +08:00
Jonas Karlman
41cb87be06 rockchip: rk3566-radxa-cm3-io: Use pinctrl for sdmmc and sdhci in SPL
Enable pinctrl for sdmmc and sdhci in SPL to support loading of FIT
image from SD and eMMC storage when booting from SPI NOR flash.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-05-18 08:44:04 +08:00
Jonas Karlman
1bf49d5a4a rockchip: rk3566-radxa-cm3-io: Update defconfig
Update defconfig for rk3566-radxa-cm3-io with new defaults. Also add
missing supported mmc modes to sdhci node.

Remove the SPL_ROCKCHIP_BACK_TO_BROM=y option, SPL is expected to load
next stage from a FIT image and then jump to next stage not back to
BootRom.

Add CONFIG_SPL_FIT_SIGNATURE=y to let SPL verify an auto generated hash
of FIT images. This help indicate if there is an issue loading any of
the images to DRAM or SRAM.

Extend SPL_MAX_SIZE to 0x40000, SPL is loaded to 0x0 and TF-A is loaded
to 0x40000, use the space in between as SPL_MAX_SIZE.

Add config option to include useful gpio cmd.

Remove the CONFIG_NET_RANDOM_ETHADDR=y option, ethaddr and eth1addr is
set based on cpuid read from OTP.

Filter out assigned-clock props with CONFIG_OF_SPL_REMOVE_PROPS,
U-Boot proper will read and configure assigned-clock props.

Add CONFIG_SYS_NS16550_MEM32=y to use 32bit access of serial register.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-05-18 08:44:04 +08:00
Eugen Hristev
6832810814 configs: rock5b-rk3588: add PCI drivers and command
Add drivers for PCIe , phy, and command.

Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-05-18 08:44:04 +08:00
Jonas Karlman
5713135ecc rockchip: rockpro64: Build u-boot-rockchip-spi.bin
Enable CONFIG_ROCKCHIP_SPI_IMAGE to build u-boot-rockchip-spi.bin.
Define CONFIG_SYS_SPI_U_BOOT_OFFS to write u-boot.itb at the expected
offset. Enable CONFIG_LTO to reduce size of SPL so that the mkimage
output fit before the 0x60000 offset in u-boot-rockchip-spi.bin.

  => sf probe
  SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
  => load mmc 1:1 10000000 u-boot-rockchip-spi.bin
  1442304 bytes read in 27 ms (50.9 MiB/s)
  => sf update $fileaddr 0 $filesize
  device 0 offset 0x0, size 0x160200
  1421824 bytes written, 20480 bytes skipped in 9.501s, speed 155432 B/s

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-05-18 08:44:04 +08:00
Jonas Karlman
6e2b8344d6 rockchip: rock-pi-4: Use SDMA to boost eMMC performance
Enable the use of SDMA mode to boost eMMC performance on ROCK Pi 4.
Also add missing flags to indicate the supported MMC modes.

Using mmc read command to read 32 MiB data shows following improvement:

  => time mmc read 10000000 2000 10000

Before: time: 3.178 seconds
After: time: 0.402 seconds

This also enables CONFIG_SPL_FIT_SIGNATURE option to help discover
any possible future issue with loading TF-A into DRAM/SRAM.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-05-18 08:44:04 +08:00
Jonas Karlman
cf777572ca rockchip: rockpro64: Use SDMA to boost eMMC performance
Enable the use of SDMA mode to boost eMMC performance on RockPro64.
Also add missing flags to indicate the supported MMC modes.

Using mmc read command to read 32 MiB data shows following improvement:

  => time mmc read 10000000 2000 10000

Before: time: 3.178 seconds
After: time: 0.402 seconds

This also enables CONFIG_SPL_FIT_SIGNATURE option to help discover
any possible future issue with loading TF-A into DRAM/SRAM.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-05-18 08:34:45 +08:00
Jonas Karlman
3b804b370d mmc: rockchip_sdhci: Disable DMA mode using a device tree property
Loading part of TF-A into SRAM from eMMC using DMA fails on RK3399
similar to other Rockchip SoCs. Checksum validation fails with:

  ## Checking hash(es) for Image atf-2 ... sha256 error!
  Bad hash value for 'hash' hash node in 'atf-2' image node
  spl_load_simple_fit: can't load image loadables index 1 (ret = -1)
  mmc_load_image_raw_sector: mmc block read error
  SPL: failed to boot from all boot devices
  ### ERROR ### Please RESET the board ###

Add a device tree property, u-boot,spl-fifo-mode, to control when the
rockchip_sdhci driver should disable the use of DMA and fallback on PIO
mode. Same device tree property is used by the rockchip_dw_mmc driver.

In commit 2cc6cde647 ("mmc: rockchip_sdhci: Limit number of blocks
read in a single command") the DMA mode was disabled using a CONFIG
option on RK3588. Revert that and instead disable DMA using the device
tree property for all RK3588 boards, also apply similar workaround for
all RK3399 boards.

Fixes: 2cc6cde647 ("mmc: rockchip_sdhci: Limit number of blocks read in a single command")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Tested-by: Quentin Schulz <foss+uboot@0leil.net> # RK3399 Puma, RK3588 Tiger
2023-05-18 08:34:45 +08:00
Eugen Hristev
6891bdf711 configs: rockchip: rock5b-rk3588: add pinctrl to SPL
Add pinctrl driver in SPL. Do not remove pinctrl properties for SPL dtb.

Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-05-17 17:36:18 +08:00
Eugen Hristev
adef6ebc06 configs: rockchip: rock5b-rk3588: enable USB and regulators
Enable USB command, USB drivers, PHY and regulators, for USB host
operations.

Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
2023-05-17 17:36:14 +08:00
Stefan Herbrechtsmeier
35a6fdc58d powerpc/mpc85xx: socrates: Remove misuse of env is nowhere driver
When using a list of writeable variables, the initial values come from
the built-in default environment since commit 5ab8105836
("env: Complete generic support for writable list"). Remove unnecessary
misuse of the env is nowhere driver as default environment.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
2023-05-16 16:12:21 -04:00
Stefan Herbrechtsmeier
b16fd7f75f imx6q: acc: Remove misuse of env is nowhere driver
When using a list of writeable variables, the initial values come from
the built-in default environment since commit 5ab8105836
("env: Complete generic support for writable list"). Remove unnecessary
misuse of the env is nowhere driver as default environment.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
2023-05-16 16:12:21 -04:00
Stefan Herbrechtsmeier
78b54e323f imx6: aristainetos: Remove misuse of env is nowhere driver
When using a list of writeable variables, the initial values come from
the built-in default environment since commit 5ab8105836
("env: Complete generic support for writable list"). Remove unnecessary
misuse of the env is nowhere driver as default environment.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
2023-05-16 16:12:21 -04:00
Tom Rini
c21fc9e152 Xilinx changes for v2023.07-rc3
.mailmap
 - Fix Xilinx IDs
 
 ZynqMP:
 - Fix R5 split boot mode
 - DT fixes - sync with Linux
 
 Xilinx:
 - Enable virtio and RNG support
 - Enable ADI ethernet phy
 
 SPI/Zynq:
 - Fix dummy byte calculation
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCZGM+/gAKCRDKSWXLKUoM
 Id6XAKCEfBfLOxuya8r8jdh8N5QCjTj0FACfXAZQYVX67bUr00PHRlHmSppV65Q=
 =Thv+
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2023.07-rc3' of https://source.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx changes for v2023.07-rc3

.mailmap
- Fix Xilinx IDs

ZynqMP:
- Fix R5 split boot mode
- DT fixes - sync with Linux

Xilinx:
- Enable virtio and RNG support
- Enable ADI ethernet phy

SPI/Zynq:
- Fix dummy byte calculation
2023-05-16 09:10:57 -04:00
Ashok Reddy Soma
04d66e76d1 arm64: versal: Enable ADIN ethernet phy
Versal VEK280 board has Analog Devices ethernet phy. So, enable
CONFIG_PHY_ADIN config in Versal defconfig.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20230420085645.21260-3-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-05-15 09:33:57 +02:00
Ashok Reddy Soma
e0406f35e1 arm64: zynqmp: Enable ADIN ethernet phy
Some of the Kria SOM and ZynqMP boards are using Analog Devices ethernet
phy. So, enable CONFIG_PHY_ADIN for all ZynqMP platforms.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20230420085645.21260-2-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-05-15 09:33:57 +02:00
Michal Simek
9c10a69e10 xilinx: Enable virtio mmio transport and devices
Qemu can create virtio mmio transports and passing devices through it
that's why enable virtio by default on all arm64 based SoCs.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/a2ee18e7e8c1881ce72c5cd13127794a02410696.1679583129.git.michal.simek@amd.com
2023-05-15 09:33:55 +02:00
Ralph Siemsen
e87c869db3 board: schneider: add RZN1 board support
Add support for Schneider Electric RZ/N1D and RZ/N1S boards, which
are based on the Reneasas RZ/N1 SoC devices.

The intention is to support both boards using a single defconfig, and to
handle the differences at runtime.

Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-05-13 04:01:30 +02:00
Simon Glass
b982f89c58 x86: samus: Adjust TPL start and pre-reloc memory size
Move the TPL up a little to make room for the refcode binary blob. Also
increase the pre-relocation memory to make space for recent additions.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-05-11 10:25:30 +08:00
Simon Glass
94c11e96fd x86: samus: Drop EFI_LOADER
This adds a lot of code so that it cannot be built with the binary
blobs. It is not used on this board. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-05-11 10:25:29 +08:00
Simon Glass
44dc33042f coreboot: Enable ms command
This is useful when looking for tables in memory. Enable it for coreboot.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-05-11 10:25:29 +08:00
Simon Glass
fa328446bc x86: nvme: coreboot: Enable NVMe
Enable support for NVMe storage devices. Update the driver to enable the
bus master bit, since coreboot does not do that automatically.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-05-11 10:25:29 +08:00
Simon Glass
ea45ee1fc3 x86: coreboot: Log function names and line numbers
Turn these options on to make it easier to debug things.

Also enable dhrystone so we can get some measure of performance.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-05-11 10:25:29 +08:00
Simon Glass
2cbc6aa47e x86: coreboot: Scan PCI after relocation
Enable this so that PCI devices can be used correctly without needing
to do a manual scan.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2023-05-11 10:25:29 +08:00
Simon Glass
b21626d4cb x86: coreboot: Use a memory-mapped UART
This is much more common on modern hardware, so default to using it.

This does not affect the normal UART, but does allow the debug UART to
work, since it uses serial_out_shift(), etc.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2023-05-11 10:25:29 +08:00
Tom Rini
0a9a4384c1 Merge tag 'u-boot-rockchip-20230509' of https://source.denx.de/u-boot/custodians/u-boot-rockchip
- Rockchip NFC driver update and dev addr pointer api update;
- use standard dr_mode for usb driver;
- rock pi boards dts update;
- Add rk3566 Anbernic boards;
- Misc fixes for drivers;
2023-05-09 12:45:49 -04:00
FUKAUMI Naoki
1495bf17b8 configs: rockchip: add Radxa ROCK 4C+
add defconfig for Radxa ROCK 4C+.

Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-05-09 22:50:01 +08:00
FUKAUMI Naoki
5488a5b1db configs: rockchip: rock-pi-4: use dtb for ROCK Pi 4A instead of 4B
rk3399-rock-pi-4a.dtb is enough for Radxa ROCK Pi 4A/B/A+/B+ and ROCK 4SE.

Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-05-09 22:50:01 +08:00
Tianling Shen
7000a60947 rockchip: rk3328: Add support for FriendlyARM NanoPi R2C
The NanoPi R2C is a minor variant of NanoPi R2S with the on-board NIC
chip changed from rtl8211e to yt8521s, and otherwise identical to R2S.

The device tree is taken from the kernel linux-next branch:
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=004589ff9df5b75672a78b6c3c4cba93202b14c9

Signed-off-by: Tianling Shen <cnsztl@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-05-09 18:58:25 +08:00
Tom Rini
56a3a499f4 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-05-08 13:43:35 -04:00
Nikhil M Jain
5c64598bf7 configs: am62x_evm_a53_defconfig: Changes in memory to support SPL splash screen
To enable splash at A53 SPL, need to do memory map changes which
involves locate stack above malloc and have enough space to load bmp
image above stack. To load a 1920X1200 image a minimum of 8.8MB space is
needed, to support it move malloc down to 0x80b80000 from 0x80480000 and
bss to 0x80c80000 to have 1MB buffer between malloc and BSS.

Observed SPL size 195KB, CONFIG_SPL_SIZE_LIMIT set to 256KB.
Observed stack size 1904Bytes, CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK set
to 2KB.
CONFIG_SPL_SYS_REPORT_STACK_F_USAGE config sets stack above the malloc
and reports for stack overflow.

Memory map at A53 SPL before splash screen
0x80000000+---------------------+
          |    Empty 512 KB     |
          |                     |
0x80080000+---------------------+
          |     Text Base       |
          |       352 KB        |
          |                     |
0x800D8000+---------------------+
          |                     |
          |                     |
          |    Empty 3.6MB      |
          |                     |
          |                     |
0x80477660+---------------------+
          |    Stack 2 KB       |
0x80477e60+---------------------+
          |     GD 416 Bytes    |
0x80478000+---------------------+
          |    Malloc 352 KB    |
          |                     |
0x80480000+---------------------+
          |                     |
          |                     |
          |                     |
          |                     |
          |   Empty 5.5 MB      |
          |                     |
          |                     |
          |                     |
          |                     |
0x80a00000+---------------------+
          |                     |
          |      BSS 512 KB     |
          |                     |
0x80a80000+---------------------+
          |                     |
          |                     |
          |                     |
          |                     |
          |   Empty 5.5 MB      |
          |                     |
          |                     |
          |                     |
          |                     |
0x81000000+---------------------+FIT Image load address

New memory map with splash screen at SPL
0x80000000+---------------------+
          |    Empty 512 KB     |
          |                     |
0x80080000+---------------------+
          |     Text Base       |
          |       352 KB        |
          |                     |
0x800D8000+---------------------+
          |    Empty 1.1MB      |
          |                     |
0x80200000+---------------------+
          |                     |
          |                     |
          |                     |
          |   BMP Image Load    |
          |                     |
          |       9.4 MB        |
          |                     |
          |                     |
          |                     |
          |                     |
          |                     |
          |                     |
0x80b77660+---------------------+
          |     Stack 2KB       |
0x80b77e60+---------------------+
          |    GD 416 Bytes     |
0x80b78000+---------------------+
          |                     |
          |    Malloc 352KB     |
0x80b80000+---------------------+
          |                     |
          |     Empty 1 MB      |
          |                     |
0x80c80000+---------------------+
          |     BSS 512 KB      |
          |                     |
0x80d00000+---------------------+
          |                     |
          |                     |
          |    Empty 3.0 MB     |
          |                     |
          |                     |
          |                     |
0x81000000+---------------------+FIT Image load addressi

Signed-off-by: Nikhil M Jain <n-jain1@ti.com>
2023-05-08 09:26:12 -04:00
Tom Rini
1917a1a8a8 Merge branch 'for-2023.07-2' of https://source.denx.de/u-boot/custodians/u-boot-mpc8xx
This pull request adds misc fixes for cssi boards and activates
CPM relocation in order to enable the use of SCC4 in
QMC (QUICC Multi-Channel) mode.
2023-05-07 09:44:27 -04:00
Chris Morgan
6cf6fe2537 board: rockchip: add Anbernic RGXX3 Series Devices
The Anbernic RGxx3 is a "pseudo-device" that encompasses the following
devices:

 - Anbernic RG353M
 - Anbernic RG353P
 - Anbernic RG353V
 - Anbernic RG353VS
 - Anbernic RG503

The rk3566-anbernic-rgxx3.dtsi is synced with upstream Linux, but
rk3566-anbernic-rgxx3.dts is a U-Boot specific devicetree that
is used for all RGxx3 devices.

Via the board.c file, the bootloader automatically sets the correct
fdtfile, board, and board_name environment variables so that the
correct devicetree can be passed to Linux. It is also possible to
simply hard-code a single devicetree in the boot.scr file and use
that to load Linux as well.

The common specifications for each device are:

 - Rockchip RK3566 SoC
 - 2 external SDMMC slots
 - 1 USB-C host port, 1 USB-C peripheral port
 - 1 mini-HDMI output
 - MIPI-DSI based display panel
 - ADC controlled joysticks with a GPIO mux
 - GPIO buttons
 - A PWM controlled vibrator
 - An ADC controlled button

All of the common features are defined in the devicetree synced from
upstream Linux.

TODO: DSI panel auto-detection for the RG353 devices (requires porting
of DSI controller driver and DSI-DPHY driver to send DSI commands to
the panel).

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-05-06 17:45:05 +08:00
Christian Kohlschütter
c2d5edff91 rk3399: r4s: Derive local MAC address if EEPROM is missing
Some RK3399 boards, such as newer revisions of NanoPi R4S, do not
provide an EEPROM chip containing a globally unique MAC address.

Currently, this means that a randomly generated temporary MAC address
may be generated each time the device is rebooted, leading to ARP cache
issues and other confusing bugs.

Since RK3399 CPUs provide a built-in unique serial number, we can
reliably derive a locally MAC address from it by reading the
corresponding bits from the non-secure efuse block.

Enable configuration options that allow deriving a local MAC address
from the CPU serial number.
2023-05-06 17:28:18 +08:00
Ehsan Mohandesi
eafbe16b01 test/py: IPv6 network discovery test
Test the IPv6 network discovery feature if indicated by boardenv file.

Signed-off-by: Ehsan Mohandesi <emohandesi@linux.microsoft.com>
Reviewed-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
2023-05-05 17:59:19 -04:00
Sean Edmond
29fb68c4ff net: dhcp6: Add a sandbox test for dhcp6
Requires proper environment with DHCP6 server provisioned.

Signed-off-by: Sean Edmond <seanedmond@microsoft.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-05-05 17:48:44 -04:00
Tom Rini
eb59ece520 Merge tag 'fsl-qoirq-2023-5-5' of https://source.denx.de/u-boot/custodians/u-boot-fsl-qoriq
fsl-ls1088a device tree update
enable DM_SERIAL for ten64
check for crypto node first in fdt_fixup_remove_jr
2023-05-05 09:33:29 -04:00
Christophe Leroy
0ec8ebef87 board: cssi: Activate SMC relocation on CMPC885 board for MIAE device
When CMPC885 board is used for MIAE device, SCC2 SCC3 and SMC2
are used for serial lines. Therefore only SCC4 is available for
handling the TDM line.

In order to use SCC4 in QMC mode without loosing SMC2, SMC2
must be relocated.

Activate SMC relocation and relocate SMC2 at offset 0x1fc0 which
is unused.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
2023-05-05 07:26:53 +02:00
Mathew McBride
7fb6032bae configs: ten64: enable DM_SERIAL
The recent series "Convert LS1088A and LX2160 to DM_SERIAL"
from Ioana Ciornei provided the necessary support to enable
DM_SERIAL on the Ten64 board (LS1088A).

Signed-off-by: Mathew McBride <matt@traverse.com.au>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> # on LS1088A-RDB
2023-05-05 09:46:03 +08:00
Manorit Chawdhry
bebe2f66f5 configs: j7200: Merge the HS and non-HS defconfigs
K3 devices have runtime type board detection. Make the default defconfig
include the secure configuration. Then remove the HS specific config.

Non-HS devices will continue to boot due to runtime device type detection.
If TI_SECURE_DEV_PKG is not set the build will emit warnings, for non-HS
devices these can be ignored.

Reviewed-by: Kamlesh Gurudasani <kamlesh@ti.com>
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-05-04 13:07:05 -04:00
Manorit Chawdhry
2cc4d4f853 configs: j721s2: Merge the HS and non-HS defconfigs
K3 devices have runtime type board detection. Make the default defconfig
include the secure configuration. Then remove the HS specific config.

Non-HS devices will continue to boot due to runtime device type detection.
If TI_SECURE_DEV_PKG is not set the build will emit warnings, for non-HS
devices these can be ignored.

Reviewed-by: Kamlesh Gurudasani <kamlesh@ti.com>
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-05-04 13:04:30 -04:00
Praneeth Bajjuri
8f3e2d14a6 configs: am62x: enable secure device configs by default
Enable the CONFIG_TI_SECURE_DEVICE by default

Non-HS devices will continue to boot due to runtime device type detection.

TI's security enforcing SoCs will authenticate each binary it loads by
comparing it's signature with keys etched into the SoC during the boot
up process. The am62x family of SoCs by default will have some level of
security enforcement checking. To keep things as simple as possible,
enable the CONFIG_TI_SECURE_DEVICE options by default so all levels of
secure SoCs will work out of the box

Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Kamlesh Gurudasani <kamlesh@ti.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
2023-05-04 13:03:54 -04:00
Christophe Leroy
019b39b736 board: cssi: Load CMPC885's motherboard FPGA earlier
In order to know the motherboard type earlier, perform I/O ports
initialisation and FPGA loading in board_early_init_f() instead
of board_early_init_r().

This is needed to be able to load mpc8xx CPM microcode base on
motherboard type and before starting to use the CPM.

Console is not available yet so remove the printfs.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
2023-05-04 10:58:07 +02:00
Tom Rini
d30fbabade bk4r1: Enable LTO
In order to allow for general platform growth due to fixes, enable LTO
here to give us more room.

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-05-03 18:30:46 -04:00
Tom Rini
2440719d25 u-boot-imx-20230503
-------------------
 
 - Fixes for : pico-imx6ul, smegw01
 - new boards: DMSSE20, Reform 2
 - fix: get_boot_device, PLL video rate
 
 CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/16211
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCZFJGmw8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76ZirwCggyjQaqPg7dm0OAzfgD2gEoR/058AoI9jLtVd
 JaM9K5RoIu0V1AjBKXQe
 =l+ri
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20230503' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

u-boot-imx-20230503
-------------------

- Fixes for : pico-imx6ul, smegw01
- new boards: DMSSE20, Reform 2
- fix: get_boot_device, PLL video rate

CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/16211
2023-05-03 13:15:12 -04:00
Dzmitry Sankouski
8144210e75 starqltechn: enable bootmenu
Needed for multiboot with vendor's Android.

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
2023-05-03 09:05:24 -04:00
Dzmitry Sankouski
a2612d7c55 starqltechn: use button keyboard driver
Button keyboard driver used to navigate bootmenu entries.

Add gpio buttons, button keyboard driver.
Add gpio keys dts bindings.

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-05-03 09:05:24 -04:00
Dzmitry Sankouski
6a0c30610c starqltechn: use 16x32 font
This font is more readable on high ppi display

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-05-03 09:05:24 -04:00
Yang Xiwen
33f19038cc arm: histb: hi3798mv200: add initial support for Hi3798MV200 HC2910-2AGHD05 board
A board with Hi3798MV200 SoC and various peripherals. Details are in the
board README.md.

Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
2023-05-03 09:05:24 -04:00
Tom Rini
7a3ee61f55 arm: Remove omap5_uevm board
This platform is unsupported by TI and was never widely distributed.  As
this is untested for a long while and missing some DM conversions,
remove it and related device tree files.

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-05-03 09:05:24 -04:00
Nitin Yadav
4d03f476a7 arm: mach-k3: Workaround errata ID i2331
Errata doc: https://www.ti.com/lit/pdf/sprz457
Errata ID i2331 CPSW: Device lockup when reading CPSW registers

Details: A device lockup can occur during the second read of any CPSW
subsystem register after any MAIN domain power on reset (POR). A MAIN
domain POR occurs using the hardware MCU_PORz signal, or via software
using CTRLMMR_RST_CTRL.SW_MAIN_POR or CTRLMMR_MCU_RST_CTRL.SW_MAIN_POR.
After these resets, the processor and internal bus structures may get
into a state which is only recoverable with full device reset using
MCU_PORz.
Due to this errata, Ethernet boot should not be used on this device.

Workaround(s): To avoid the lockup, a warm reset should be issued after
a MAIN domain POR and before any access to the CPSW registers. The warm
reset realigns internal clocks and prevents the lockup from happening.
Workaround above errata by calling do_reset() in case of cold boot in
order to trigger warm reset. This needs enabling SYSRESET driver in R5
SPL to enable TI SCI reset driver.

Signed-off-by: Nitin Yadav <n-yadav@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
2023-05-03 09:05:24 -04:00
Kishon Vijay Abraham I
bd52f45208 configs: j7200_evm_a72: Enhance bootcmd to configure ethernet PHY
Update the default BOOTCOMMAND to provide an automatic and easier way
to configure ethernet PHY before loading the firmware.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
2023-05-03 09:05:24 -04:00
Frank Wunderlich
36cbd6b2eb configs: change bpi-r3 to board specific dts and change prompt
Use own devicetree for the board and change the prompt.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
2023-05-03 09:05:24 -04:00
Linus Walleij
6f63c296fe board: Add new Broadcom Northstar board
This adds a simple Northstar "BRCMNS" board to be used with
the BCM4708x and BCM5301x chips.

The main intention is to use this with the D-Link DIR-890L
and DIR-885L routers for loading the kernel into RAM from
NAND memory using the BCH-1 ECC and using the separately
submitted SEAMA load command, so we are currently not adding
support for things such as networking.

The DTS file is a multiplatform NorthStar board, designed to
be usable with several NorthStar designs by avoiding any
particulars not related to the operation of U-Boot.

If other board need other ECC for example, they need to
create a separate DTS file and augment the code, but I don't
know if any other users will turn up.

Cc: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-05-02 14:23:58 -04:00
Eduard Strehlau
fd20052662 smegw01: Fix fallback to altbootcmd
The bootcmd/altbootcmd mechanism is not invoked for bootmenus.
Manually compare bootcount and bootlimit to implement fallback on all
codepaths.

Signed-off-by: Eduard Strehlau <eduard@lionizers.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-05-02 10:57:32 +02:00
Eduard Strehlau
e13698bb66 smegw01: Disable additional boot menu options
Defaults have changed, we do not want the bootmenu to contain EFI
options.

Signed-off-by: Eduard Strehlau <eduard@lionizers.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-05-02 10:57:32 +02:00
Eduard Strehlau
a1bc4f1937 smegw01: Add lockdown U-Boot env support
Add lockdown U-Boot env support so that only certain U-Boot environment
variables are allowed to be modified.

Signed-off-by: Eduard Strehlau <eduard@lionizers.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-05-02 10:57:32 +02:00
Eduard Strehlau
31c6c79a01 smegw01: Enable EMMC boot from multiple partitions
GPT Partition labels are used for determining the right
root filesystem to boot from.

The U-Boot environment is configured to reside in the eMMC hardware
boot partition we are currently booted from.

This should enable a dual copy approach for upgrading the bootloader.
One can overwrite the inactive hardware partition with new bootloader
and environment and afterwards switch the eMMC boot partition for an
atomic bootloader switch.

Signed-off-by: Eduard Strehlau <eduard@lionizers.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-05-02 10:57:32 +02:00
Eduard Strehlau
440dc0694b smegw01: Run altbootcmd in the case of failure
Run the altbootcmd script if any step of bootcmd fails.

This ensures that always a valid image can be run.

Signed-off-by: Eduard Strehlau <eduard@lionizers.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-05-02 10:57:32 +02:00
Eduard Strehlau
ac52bb99cc smegw01: Add altbootcmd
Add an altbootcmd script, which is convenient way to integrate with
swupdate and perform a roll back of the previous working version in the
case of update failure.

Signed-off-by: Eduard Strehlau <eduard@lionizers.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-05-02 10:57:32 +02:00
Eduard Strehlau
3bb2b48ed2 smegw01: Select bootcount support
Add automatic boot counter that increases after every
reset. After a power-on reset, it will be initialized with 1,
and each reboot will increment the value by 1. By default it is
disabled if bootlimit isn't set.

Signed-off-by: Eduard Strehlau <eduard@lionizers.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-05-02 10:57:32 +02:00
Eduard Strehlau
21e81011a2 smegw01: Select CONFIG_CMD_SQUASHFS
Select CONFIG_CMD_SQUASHFS so that the SquashFS U-Boot commands
are available.

Signed-off-by: Eduard Strehlau <eduard@lionizers.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-05-02 10:57:32 +02:00
Oliver Graute
3bc6257e80 imx: support i.MX8QM DMSSE20 a1 board
Add i.MX8QM DMSSE20 a1 board support

U-Boot 2023.04-00030-g7be2f547b2 (Apr 21 2023 - 11:11:43 +0200)

Model: Advantech iMX8QM DMSSE20
Board: DMS-SE20A1 8GB
Build: SCFW 549b1e18, SECO-FW c9de51c0, ATF 5782363
Boot:  USB
DRAM:  8 GiB
Core:  100 devices, 19 uclasses, devicetree: separate
MMC:   FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... OK
In:    serial@5a060000
Out:   serial@5a060000
Err:   serial@5a060000
Net:   eth0: ethernet@5b040000
Warning: ethernet@5b050000 (eth1) using random MAC address - 32:05:0c:f9:5e:10
, eth1: ethernet@5b050000
Hit any key to stop autoboot:  0

Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
2023-05-02 10:57:32 +02:00
Fabio Estevam
b016fcf723 pico-imx6ul: Convert to CONFIG_DM_SERIAL
The conversion to CONFIG_DM_SERIAL is mandatory, so select
this option.

Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-05-02 10:57:32 +02:00
Patrick Wildt
ebe2e0c309 board: mntre: imx8mq: Add MNT Reform 2 board support
The MNT Reform 2 is a modular DIY laptop.  In its initial version it
is based on the BoundaryDevices i.MX8MQ SoM.  Some parts have been
lifted from BoundaryDevices official U-Boot downstream project.

Signed-off-by: Patrick Wildt <patrick@blueri.se>
Tested-by: Vagrant Cascadian <vagrant@debian.org>
Tested-by: Vagrant Cascadian <vagrant@debian.org>
Signed-off-by: Stefano Babic <sbabic@denx.de>
2023-05-02 10:57:22 +02:00
Christophe Leroy
f1dc0daf7a mpc83xx: Don't allow W and G bits in IBATs
The "Programming Environments Manual for 32-Bit Implementations of the
PowerPC™ Architecture" says "W and G bits are not defined for IBAT
registers. Attempting to write to these bits causes boundedly-undefined
results"

The "e300 Power Architecture™ Core Family Reference Manual" says the
same: "Neither the W or G bits of the IBAT registers should be set.
Attempting to write to these bits causes boundedly-undefined results."

Remove the possibility to set those bytes.

Fixes: 30915ab95d ("mpc83xx: Migrate BATS config to Kconfig")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Mario Six <mario.six@gdsys.cc>
2023-05-01 18:59:33 -04:00
Tom Rini
c960c0fd38 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-05-01 11:50:26 -04:00
Tom Rini
27dc882644 Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sunxi
Please pull the second part of the sunxi pull request for this cycle.
Another bunch of patches that replace old-school U-Boot hacks with
proper DM based code, this time for the raw NAND flash driver, and the
USB PHY VBUS detection code. Plus two smaller patches that were sitting
in my inbox for a while.

Gitlab CI passed. In lack of some supported board with NAND flash I
couldn't really test this part, but apparently this was tested by the
reviewer. I briefly ran the branch on some boards with USB-OTG, and
this still worked.
2023-04-30 21:29:50 -04:00
Tom Rini
fe3a77cb15 Merge branch 'for-2023.07' of https://source.denx.de/u-boot/custodians/u-boot-mpc8xx
This pull request adds support for the last CPU board from
CS GROUP France (previously CSSI).

That CPU board called CMPCPRO has a mpc8321E CPU (Family PQII PRO hence
its name) and can be plugged in place of the CMPC885 board.

In order to support that new board, the following changes are included
in this series:
- Make the mpc8xx watchdog driver more generic for reusing it
with mpc83xx
- Fix various small problems on mpc83xx platform
- Add a GPIO Driver for QE GPIOs
- Add support for mpc832x into mpc83xx SPI driver
- Refactor existing board code that will be shared with new board
- Add the new board
2023-04-29 09:29:41 -04:00
Christophe Leroy
4d0c8db74d board: cssi: Add CPU board CMPCPRO
CSSI has another CPU board, similar to the CMPC885 board
that get plugged on the two base boards MCR3000_2G and MIAE.

That CPU board is called CMPCPRO because it has a MPC8321E CPU,
also known as Power QUICC II PRO.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
2023-04-28 17:52:23 +02:00
Christophe Leroy
71e94640fb board: cssi: Migrate to hashed password
Use a hashed password instead of clear text in order to
improve board security.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
2023-04-28 17:52:23 +02:00
Samuel Holland
7d5b17cca6 sunxi: Switch to PMIC USB power supply VBUS detection
Update boards to use the USB power supply driver, as referenced in the
device tree, instead of a virtual GPIO. This removes the need for some
DM-incompatible special cases in the GPIO driver.

The following five boards used AXP0-VBUS-DETECT in their config, but are
missing the "usb0_vbus_power-supply" property in their device tree:
 - Ainol_AW1_defconfig / sun7i-a20-ainol-aw1
 - Cubieboard4_defconfig / sun9i-a80-cubieboard4
 - Merrii_A80_Optimus_defconfig / sun9i-a80-optimus
 - Yones_Toptech_BD1078_defconfig / sun7i-a20-yones-toptech-bd1078
 - Yones_Toptech_BS1078_V2_defconfig /
   sun6i-a31s-yones-toptech-bs1078-v2

None of those five boards have the MUSB controller (USB OTG) enabled in
their device trees, so this change should not break anything for them.

Additionally, the following board intentionally omits the property
because VBUS is always enabled:
 - Nintendo_NES_Classic_Edition_defconfig /
   sun8i-r16-nintendo-nes-classic

The PHY driver already assumes VBUS is enabled when no detection method
is available, so again this will not cause any problems.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2023-04-28 01:30:05 +01:00
Abdellatif El Khlifi
a6d7f1958a corstone1000: enable NVM XIP QSPI flash
add the QSPI flash device with block storage capability

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
2023-04-27 17:01:15 -04:00
Abdellatif El Khlifi
cc89b7cf41 sandbox64: add support for NVMXIP QSPI
enable NVMXIP QSPI for sandbox 64-bit

Adding two NVM XIP QSPI storage devices.

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-04-27 17:01:14 -04:00
Sinan Akman
23fd87c489 mpc8379erdb: Convert to using DM_SERIAL
Convert to DM_SERIAL for mpc8379erdb.

Signed-off-by: Sinan Akman <sinan@writeme.com>
2023-04-25 15:31:28 -04:00