Commit graph

12411 commits

Author SHA1 Message Date
Steffen Dirkwinkel
29771c2c39 dm: arm: imx: cx9020: migrate to dm_video
Enable DM_VIDEO in config and don't overwrite console so it can be set
from environment

Acked-by: Patrick Bruenn <p.bruenn@beckhoff.com>
Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
2019-05-20 11:57:29 +02:00
Steffen Dirkwinkel
08cc54f071 dm: arm: imx: cx9020: enable DM_GPIO
Switch to DM_GPIO and add gpio_request where necessary.
This is needed for DM_VIDEO and fixes an issue with sd card detection
which was introduced by the combination of these commits:

commit 7a0425dd96 ("mmc: fsl_esdhc: make get_cd work well in dm_mmc_ops")
commit 7e04b4c751 ("dm: arm: imx: migrate cx9020 to CONFIG_DM_MMC")

Acked-by: Patrick Bruenn <p.bruenn@beckhoff.com>
Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
2019-05-20 11:57:12 +02:00
Trevor Woerner
1001502545 CONFIG_SPL_SYS_[DI]CACHE_OFF: add
While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-05-18 08:15:35 -04:00
Trent Piepho
d1337210d1 wandboard: Don't use I2C speed Kconfig settings with DM_I2C
When using DM_I2C the speed value supplied to setup_i2c() is not used,
so this code required CONFIG_SYS_MXC_I2C[12]_SPEED to be defined to
compile, but did not actually use them.

Change this so we no longer need to define an unused macro to compile in
DM_I2C mode.  Also make it more clear that they do not control the bus
speed.  Otherwise it is quite easy to mistakenly believe they are used
to set the bus speed.

Cc: Heiko Schocher <hs@denx.de>
Cc: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
2019-05-17 05:35:24 +02:00
Eugen Hristev
bc2d313d68 board: atmel: sama5d2_icp: enable green led on SPL completion
Enable the green led on SPL completion.
Red led has no pulldown and it will be lighted by default when the
board starts up.
If the PMIC is not configured to enable LDO2, the leds will not light.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-05-15 09:34:22 +03:00
Eugen Hristev
2950c514e8 board: atmel: sama5d2_icp: standby disable on CAN transceivers in SPL
The 2 CAN transceivers have a STBDY pin which must be low in order to
operate.
This pin is tied to PB25.
Set it to 0 in bootstrap.
At a later time, this needs to be controlled by Linux power management
system, or requested by some driver as a gpio and tied to 0 during
CAN link up.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-05-15 09:34:22 +03:00
Eugen Hristev
57fbd36c66 board: atmel: sama5d2_icp: add periph reset in SPL hw init
Some periphs on the board need to be reset by holding their reset GPIO down
for a specific time period.
On a warm reset, the periphs are not being reset by any reset pin and may be
in a wrong state.
Reset them in the SPL to make sure we are booting into the correct state
machine of the specific board periphs (KSZ eth switch, USB hub, HSIC eth,
Ethercat)

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-05-15 09:34:22 +03:00
Wolfgang Grandegger
990ed4452c arm: socfpga: Re-add support for Aries MCV SoM and MCVEV[KP] board
Re-add support for Aries Embedded MCV SoM, which is CycloneV based
and the associated MCVEVK and MCVEVP baseboard. The board can boot
from eMMC. Ethernet and USB is supported.

The Aries Embedded boards have been removed with commit 03b54997d5
("board/aries: Remove"). I will now take care of them.

The device-tree files are from mainline Linux commit e93c9c99a629
("Linux v5.1)".

Signed-off-by: Wolfgang Grandegger <wg@aries-embedded.de>
CC: Marek Vasut <marex@denx.de>
CC: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-05-14 19:52:39 +02:00
Tom Rini
d2d8f73da4 Merge branch 'master' of git://git.denx.de/u-boot-socfpga
- A10 FPGA programming support, Gen5 livetree conversion
2019-05-13 07:13:03 -04:00
Tien Fong Chee
f78b505f81 ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK
Add default fitImage file bundling FPGA bitstreams for Arria10.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
2019-05-10 22:48:10 +02:00
Marek Vasut
89a6b74636 sh: shmin: Remove the board
Last change to this board was done in 2016, has no prospects of
ever being converted to DM, drop it.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Chris Brandt <chris.brandt@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Vladimir Zapolskiy <vz@mleia.com>
Cc: Yoshihiro Shimoda <shimoda.yoshihiro.uh@renesas.com>
2019-05-10 22:43:18 +02:00
Marek Vasut
d7d7e84856 sh: ms7720se: Remove the board
Last change to this board was done in 2016, has no prospects of
ever being converted to DM, drop it.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Chris Brandt <chris.brandt@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Vladimir Zapolskiy <vz@mleia.com>
Cc: Yoshihiro Shimoda <shimoda.yoshihiro.uh@renesas.com>
2019-05-10 22:43:18 +02:00
Marek Vasut
a786d9be88 sh: mpr2: Remove the board
Last change to this board was done in 2016, has no prospects of
ever being converted to DM, drop it.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Chris Brandt <chris.brandt@renesas.com>
Cc: Mark Jonas <mark.jonas@de.bosch.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Vladimir Zapolskiy <vz@mleia.com>
Cc: Yoshihiro Shimoda <shimoda.yoshihiro.uh@renesas.com>
2019-05-10 22:43:18 +02:00
Marek Vasut
54eac8b3a3 sh: rsk7269: Remove the board
Last change to this board was done in 2016, has no prospects of
ever being converted to DM, drop it.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Chris Brandt <chris.brandt@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Vladimir Zapolskiy <vz@mleia.com>
Cc: Yoshihiro Shimoda <shimoda.yoshihiro.uh@renesas.com>
2019-05-10 22:43:18 +02:00
Marek Vasut
58300f399f sh: rsk7264: Remove the board
Last change to this board was done in 2016, has no prospects of
ever being converted to DM, drop it.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Chris Brandt <chris.brandt@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Vladimir Zapolskiy <vz@mleia.com>
Cc: Yoshihiro Shimoda <shimoda.yoshihiro.uh@renesas.com>
2019-05-10 22:43:18 +02:00
Marek Vasut
5736453c6f sh: rsk7203: Remove the board
Last change to this board was done in 2016, has no prospects of
ever being converted to DM, drop it.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Chris Brandt <chris.brandt@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Vladimir Zapolskiy <vz@mleia.com>
Cc: Yoshihiro Shimoda <shimoda.yoshihiro.uh@renesas.com>
2019-05-10 22:43:18 +02:00
Tom Rini
f30f268a07 Merge tag 'rockchip-for-v2019.07-rc1' of git://git.denx.de/u-boot-rockchip
Improvements and new features:
- split more rockchip pinctrl_core feature into per SoC
- enable TPL for evb-rk3399 board
- enable TPL/SPL for evb-px5 board
- enable TPL and OP-TEE support for evb-rk3229
- update fix in arm common assembly start code for rockchip header file
- update default SPL_FIT_GENERATOR for rockchip
- rk3399 boards update to use '-u-boot.dtsi'
- add new rk3399 boards: Nanopi M4, Nanopc T4
- enable sound for chromebook_minnie
2019-05-09 12:36:17 -04:00
Tom Rini
062aceb8bf Merge git://git.denx.de/u-boot-marvell
- DM updates for multiple MVEBU boards (Stefan)
- Add CRS305-1G-4S board (Luka)
- Enable MMC in SPL on clearfog (Baruch)
2019-05-09 07:12:25 -04:00
Tom Rini
7d41f2dcbe Merge git://git.denx.de/u-boot-riscv
- Correct SYS_TEXT_BASE for qemu.
- Support booti.
- Increase SYSBOOTM_LEN for Fedora/RISCV kernel.
- Support SMP booting from flash.
2019-05-09 07:11:52 -04:00
Jagan Teki
65cc7dcd77 rockchip: rk3399: Add Nanopc T4 board support
Add initial support for Nanopc T4 board.

Specification
- Rockchip RK3399
- Dual-Channel 4GB LPDDR3-1866
- SD card slot
- 16GB eMMC
- RTL8211E 1Gbps
- AP6356S WiFI/BT
- HDMI In/Out, DP, MIPI DSI/CSI, eDP
- USB 3.0, 2.0
- USB Type C power and data
- GPIO expansion ports
- DC 12V/2A

Commit details of rk3399-nanopc-t4.dts sync from Linux 5.1-rc2:
"arm64: dts: rockchip: Add NanoPC-T4 IR receiver"
(sha1: 95658e21b1707ad7844f873db2fdaa295109a5a3)

Tested-by: Daniel Gröber <dxld@darkboxed.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-09 18:24:31 +08:00
Jagan Teki
b2f5da9dd0 rockchip: rk3399: Add Nanopi M4 board support
Add initial support for Nanopi M4 board.

Specification
- Rockchip RK3399
- Dual-Channel 4GB LPDDR3-1866
- SD card slot
- eMMC socket
- RTL8211E 1Gbps
- AP6356S WiFI/BT
- HDMI In/Out, DP, MIPI DSI/CSI
- USB 3.0 x4
- USB Type C power and data
- GPIO1, GPIO2 expansion ports
- DC5V/3A

Commit details of rk3399-nanopi-m4.dts sync from Linux 5.1-rc2:
"arm64: dts: rockchip: Refine nanopi4 differences"
(sha1: c62ffaf5026d0b7633e62b2cea8450b5543c349a)

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-05-09 18:24:31 +08:00
Rick Chen
d8fc1ef2f0 riscv: configs: AE350 will use CONFIG_OF_SEPARATE when boots from flash
When AE350 boots from flash, use CONFIG_OF_SEPARATE instead of
CONFIG_OF_BOARD.

Also remove unused code about prior_stage_fdt_address.
And modify CONFIG_SYS_FDT_BASE as flash address.

Signed-off-by: Rick Chen <rick@andestech.com>
Cc: Greentime Hu <greentime@andestech.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
2019-05-09 16:46:46 +08:00
Rick Chen
e7e47f6391 riscv: configs: Support AE350 SMP booting from flash flow
Add two defconfigs to support AE350 SMP booting from flash.

Signed-off-by: Rick Chen <rick@andestech.com>
Cc: Greentime Hu <greentime@andestech.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
2019-05-09 16:46:46 +08:00
Anup Patel
8aa278df0a riscv: qemu: Use correct SYS_TEXT_BASE for S-mode on 32bit system
For 32bit system, the OpenSBI (or BBL) will jump to 0x80400000 address
in S-mode whereas for 64bit system it will jump to 0x80200000 address
in S-mode.

Currently, the S-mode U-Boot sets SYS_TEXT_BASE to 0x80200000 for both
32bit and 64bit system. This breaks S-mode U-Boot for 32bit system.

This patch sets different SYS_TEXT_BASE for 32bit and 64bit system so
that S-mode U-Boot works fine for both.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
Tested-by: Karsten Merker <merker@debian.org>
2019-05-09 16:46:24 +08:00
Luka Kovacic
22bb913fdf arm: mvebu: Add CRS305-1G-4S board
CRS305-1G-4S has a switch chip with an integrated CPU (98DX3236) and
like some of the other similar boards requires bin_hdr.
bin_hdr (DDR3 init stage) is currently retrieved from the stock
bootloader and compiled into the kwb image.

Adds support for U-Boot, enable UART, SPI, Winbond SPI flash chip
support and writing env to SPI flash.

Signed-off-by: Luka Kovacic <me@lukakovacic.xyz>
Reviewed-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2019-05-09 07:35:04 +02:00
Tom Rini
eb511984e9 Merge branch 'master' of git://git.denx.de/u-boot-net
- Various PHY fixes / enhancements.
- TI K2G fixes
2019-05-08 22:46:31 -04:00
Murali Karicheri
89bf9f1162 ARM: k2g-ice: Add pinmux support for rgmii interface
This add pinmux configuration for rgmii interface so that network
driver can be supported on K2G ICE boards. The pinmux configurations
for this are generated using the pinmux tool at
https://dev.ti.com/pinmux/app.html#/default

As this required some BUFFER_CLASS definitions, same is re-used
from the linux defnitions in include/dt-bindings/pinctrl/keystone.h

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-05-08 17:27:00 -05:00
Murali Karicheri
63200d8457 ARM: k2g-gp-evm: update to rgmii pinmux configuration
This patch updates pinmux configuration for K2G GP EVM based on
data generated by the pinmux tool at
https://dev.ti.com/pinmux/app.html#/default

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-05-08 17:27:00 -05:00
Tom Rini
504bf790da Merge branch 'master' of git://git.denx.de/u-boot-sunxi
- H6 Beelink GS1 board (Clément)
- Olimex A64-Teres-I board (Jonas)
- sunxi build fix for CONFIG_CMD_PXE|DHCP (Ondrej)
- Change include order (Jagan)
- EPHY clock changes (Jagan)
- EMAC enablement on Cubietruck Plus, BPI-M3 (Chen-Yu Tsai)
2019-05-08 16:21:43 -04:00
Jonas Smedegaard
997b857ae3 sun50i: a64: Add Olimex A64-Teres-I board initial support
Olimex A64-Teres-I board is a mainboard (the only one so far)
for Olimex Teres-I DIY laptop kit.

Key features:
- Allwinner A64 Cortex-A53
- Mali-400MP2 GPU
- AXP803 PMIC
- 2GB DDR3 RAM
- MicroSD Slot
- 16GB eMMC Flash
- eDP LCD display
- HDMI
- USB Host
- Battery management
- 5V DC power supply
- Certified Open Source Hardware (OSHW)

Works:
- i2C
- MMC/SD
- PWM backlight

Known broken:
- Internal keyboard (seems to be because the keyboard firmware loads a
bootloader first, and then disconnects bootloader and connect real
keyboard). External ones connected to the USB port work fine.

This patch enables support for the A64-Teres-I board to u-boot,
including enabling screen backlight (lacking from Linux device-tree).

Linux commit details about the sun50i-a64-teres-i.dts sync:
"arm64: dts: allwinner: a64: Rename uart0_pins_a label to uart0_pb_pins"
(sha1: d91ebb95b96c8840932dc3a10c9f243712555467)

Cosmetic warnings regarding whitespace and placement of SPDX notice for
dts file was ignored.

config and .dtsi file are adapted from pinebook files.

Tested-by: Jonas Smedegaard <dr@jones.dk>
Signed-off-by: Jonas Smedegaard <dr@jones.dk>
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
[jagan: move board entry in MAINTAINERS file at proper position]
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-05-09 00:44:13 +05:30
Kever Yang
7c2a754235 rockchip: evb-rk3229: add README file for OP-TEE support
Detail of step by step to bring up the board with OP-TEE support.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-08 17:34:12 +08:00
Simon Glass
ffe403762b x86: samus: Add a target to boot through TPL
Add a version of samus which supports booting from TPL to SPL and then
to U-Boot. This allows TPL to select from an A or B SPL to support
verified boot with field upgrade.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-05-08 13:02:19 +08:00
Chris Brandt
ba932bc846 ARM: dts: renesas: Add RZ/A1 GR-Peach board
Add board code and DTs for Renesas RZ/A1 SoC-based GR-Peach,
which is a cheap development platform with RZ/A1H SoC. The
DTs are imported from Linux 5.0.11, commit d5a2675b207d .

Currently supported are UART, ethernet and RPC SPI. The board
can be booted from RPC SPI by writing the u-boot.bin binary
to the beginning of the SPI NOR, e.g. using the "sf" command.
The board can also be booted via JTAG by setting text base to
0x20020000, loading u-boot.bin there via JTAG and executing it
from that address.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Chris Brandt <chris.brandt@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-05-07 05:41:32 +02:00
Marek Vasut
06480665aa sh: sh7785lcr: Remove the board
Last change to this board was done in 2016, it uses non-DM USB
with no prospects of ever being converted to DM USB, drop it.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Chris Brandt <chris.brandt@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Vladimir Zapolskiy <vz@mleia.com>
Cc: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
2019-05-07 05:41:31 +02:00
Marek Vasut
e4f01b5133 sh: ecovec: Remove the board
Last change to this board was done in 2016, it uses non-DM USB
with no prospects of ever being converted to DM USB, drop it.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Chris Brandt <chris.brandt@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Vladimir Zapolskiy <vz@mleia.com>
Cc: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
2019-05-07 05:41:31 +02:00
Marek Vasut
b3c27c9429 sh: sh7757lcr: Fix copy-paste error in README
Update the README to use the correct defconfig.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Chris Brandt <chris.brandt@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Vladimir Zapolskiy <vz@mleia.com>
Cc: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
2019-05-07 05:41:31 +02:00
Tom Rini
44237e272f Merge branch 'master' of git://git.denx.de/u-boot-sh
- Various pinctrl / gpio fixes for R-Car
2019-05-06 07:19:31 -04:00
Marcel Ziswiler
aeaa4b8f31 board: toradex: drop support.arm maintainer email
Drop Toradex ARM Support <support.arm@toradex.com> from maintainer email
list as this just clogs our support ticketing system.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Stefan Agner <stefan.agner@toradex.com>
2019-05-05 08:48:50 -04:00
Brad Griffis
5adcbe0643 board: ti: am43xx: Enable hardware leveling
Remove the RDLVL_MASK, RDLVLGATE_MASK, WRLVL_MASK & enable
PHY_INVERT_CLKOUT to enable Hardware leveling for am437x
as recommended by EMIF Tools app note:

http://www.ti.com/lit/an/sprac70/sprac70.pdf

Signed-off-by: Brad Griffis <bgriffis@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-05-05 08:48:50 -04:00
Vignesh Raghavendra
c14f3c3111 board: ti: am654: select SYS_DISABLE_DCACHE_OPS for arm64 build
AM654 SoC is IO coherent wrt A53 cores, therefore enable
SYS_DISABLE_DCACHE_OPS to avoid cache operations in A53
SPL/U-Boot.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-05-05 08:48:50 -04:00
Tom Rini
86f578ee85 - mscc: small fixes, enhance network support for Serval, Luton amd
Ocelot
 - mt7620: rename arch to more generic name mtmips
 - mips: pass initrd addresses via DT as physical addresses
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiQkHUH+J02LLC9InKPlOlyTyXBgFAlzMa60ACgkQKPlOlyTy
 XBg3FBAAl5I1zNoyEQBuSpe+++0fNFkug0vV985keJA3iXdskdxE8vpxPv6wAp+w
 IjBX+e04LY7i5iW58E//f/JBjzL1H345nPeuRsflmlDARep1pqgkEAsEUglGiQW+
 ZNDq/aoImWhiiX2nQHnU4ykHNyvIhUOTjldrwU5DfIS2N+8M23pjLhODMsgaNmkd
 WfwYB91oTXRnnecwG8Nd1MJU/Jpcns5y6eYwok8vQwkCyzcfsIEP052m3r2SAUMz
 3hIlz9WKAHc+pYLz2BWbn560KPJHyS0UqfemiT/M0JasIkojJcQwtrWTKj7g7ZOq
 z8XJQ1Ny0xOYQbfbUcvQttBwVXzYQTKy0jS6qi4vB9Q0TgpRP+v//n29IAJA0YkS
 BE3Nq96cCMgKarSFkMFaXifv9flnb/wZRymB42Frb9fqiwM2wX10zhcn7zW8gUYc
 0Mocl+zkUrmtmA3gSspMJr6kkfX629l97RK7wiY0PkTa4OKSqqMR5JxlVQ+vK72N
 f/yxWYxTH/90wfVolTHt52J/hNydEapVFuudL8ffnuLo84BWzOHP3bwQwtB927zV
 g4nHxotTmVErz5Pr2JrwaZEFVI+Sc+wXPz68Z7hzZxeiO5tBAELhvtDKAsf9e1gt
 OFgQwA5cTRWWxLmWxyWY3nEbXVqAIOsdWIDepAUqrIXAI5rmFt8=
 =SZ/W
 -----END PGP SIGNATURE-----

Merge tag 'mips-pull-2019-05-03' of git://git.denx.de/u-boot-mips

- mscc: small fixes, enhance network support for Serval, Luton and Ocelot
- mt7620: rename arch to more generic name mtmips
- mips: pass initrd addresses via DT as physical addresses
2019-05-04 20:02:42 -04:00
Marek Vasut
175f502734 ARM: renesas: Configure DRAM size from ATF DT fragment
The ATF can pass additional information via the first four registers,
x0...x3. The R-Car Gen3 with mainline ATF, register x1 contains pointer
to a device tree with platform information. Parse this device tree and
extract DRAM size information from it. This is useful on systems where
the DRAM size can vary between configurations.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-05-04 19:26:49 +02:00
Tom Rini
90c2ebd215 Merge git://git.denx.de/u-boot-marvell
- Fix in kwbimage (return code checking) (Young Xiao)
- Misc updates to Turris Omnia (Marek)
2019-05-03 14:22:23 -04:00
Horatiu Vultur
bd9216e29b board: mscc: luton: Update MSCC Luton board
Implement method board_phy_config to configure the external phys
on the pcb90.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-05-03 16:46:36 +02:00
Horatiu Vultur
06d270cf57 board: mscc: ocelot: Update MSCC Ocelot board.
Implement method board_phy_config to configure the phy for pcb120.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-05-03 16:42:23 +02:00
Horatiu Vultur
d2691b4af2 board: mscc: serval: Update MSCC Serval boards
In Serval SoC family there are 2 different pcb, both of them have the same
phy, but with different version. Therefore implement board_phy_config
and set all the phys in the same way.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-05-03 16:42:23 +02:00
Horatiu Vultur
c6b2e7117d board: mscc: serval: Fix board detect
When detecting the board, it was reading a register in the GPIO page of
the phy and based on that value it was making a decision. The bug was that
after the GPIO page for the first phy was set it was not reseted back.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-05-03 16:42:23 +02:00
Tom Rini
b362fe0848 Merge branch '2019-05-03-master-imports'
- Various btrfs fixes
- Various TI platform fixes
- Other fixes (cross build, taurus update, Kconfig help text)
2019-05-03 07:30:55 -04:00
Heiko Schocher
0cac0fb022 at91: cleanup taurus port
- at91sam9g20-taurus.dts: use labels
- cleanup taurus port to compile clean with
  current mainline again. SPL has no serial
  output anymore, so it fits into SRAM.

Signed-off-by: Heiko Schocher <hs@denx.de>
2019-05-03 07:30:31 -04:00
Paul Barker
bb7b45a356 board: am335x: Drop duplicate pinmux configuration
In commit ad6054f1fe where support for the
Sancloud BeagleBone Enhanced (BBE) was added, new conditional
configuration of either MII pin muxing or RGMII pin muxing is done
depending on the board type. However, the old call to set up MII pin
muxing was not removed.

This may result in misconfiguration of the pin muxing for the BBE or
duplicate configuration for other boards and so we remove this obsolete
call.

Signed-off-by: Paul Barker <paul.barker@sancloud.co.uk>
2019-05-03 07:23:17 -04:00
Marek Behún
539f0242f3 arm: mvebu: turris_omnia: add RESET button handling
There is a Factory RESET button on the back side of the Turris Omnia
router. When user presses this button before powering the device up and
keeps it pressed, the microcontroller prevents the main CPU from booting
and counts how long the RESET button is being pressed (and indicates
this by lighting up front LEDs).

The idea behind this is that the user can boot the device into several
Factory RESET modes.

This patch adds support for U-Boot to read into which Factory RESET mode
the user booted the device. The value is an integer stored into the
omnia_reset environment variable. It is 0 if the button was not pressed
at all during power up, otherwise it is the number identifying the
Factory RESET mode.

This patch also changes bootcmd to a special hardcoded value if Factory
RESET button was pressed during device powerup. This special bootcmd
value sets the colors of all the LEDs on the front panel to green and
then tries to load the rescue image from the SPI flash memory and boot
it.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2019-05-03 08:14:39 +02:00
Marek Behún
2151926b08 arm: mvebu: turris_omnia: fix regdomain env var setting
The regdomain environment variable is set according to value read from
EEPROM. This has to be done in board_late_init, after the environment
variables are read from SPI. Select CONFIG_BOARD_LATE_INIT in Kconfig
for the Turris Omnia target.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2019-05-03 08:14:39 +02:00
Marek Behún
e28872d68b arm: mvebu: turris_*: remove watchdog include
Since board watchdog is now unified and not handled in board files,
remove the unnecessary includes.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2019-05-03 08:14:39 +02:00
Marek Behún
7f4b184af1 arm: mvebu: turris_omnia: print board info as Turris Mox
Unify the way how Omnia and Mox print board information (RAM size and
serial number).

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2019-05-03 08:14:39 +02:00
Marek Behún
f98169c55e arm: mvebu: turris_omnia: refactor more code
Refactor RAM size reading from EEPROM in preparation for next patch.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2019-05-03 08:14:39 +02:00
Marek Behún
6b26f3e312 arm: mvebu: turris_omnia: move ATSHA204A from defconfig to Kconfig
This driver is required for Turris Omnia to read ethernet addresses.
Move the dependency from turris_omnia_defconfig to Kconfig.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2019-05-03 08:14:39 +02:00
Marek Behún
b4b6a4e4ec arm: mvebu: turris_omnia: fix checkpatch warnings
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2019-05-03 08:14:39 +02:00
Marek Behún
48e6d34360 arm: mvebu: turris_omnia: refactor I2C accessing code
Refactor code which accesses the microcontroller and EEPROM via I2C.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2019-05-03 08:14:39 +02:00
Marek Behún
3828c59e54 arm: mvebu: turris_omnia: remove redundant code
The i2c slave disabling is done by mvtwsi driver and is not needed here.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Acked-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2019-05-03 08:14:39 +02:00
Tom Rini
3570ea1f98 Improvements and new features:
- improved SPI driver for better read throughput
 - refactors initialisation of debug UART init
 - restructures header file paths
 - adds pinctrl improvements
 
 Adds Kever as a co-custodian.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJcyU2hAAoJECaAFcEOcohNlFsH/3ujz7paIV34ilGGA1BQPJS7
 OOnJ7KOKkWBpwl8ai03n8/sK9kkEshZ8/PQE3E2UeWbwE9knDAREwNynYRqNwv5P
 f/6HuFZ3tCCRfVBsbTpSe4b/BxIn2zavhMQVfgd8kYaSY7dWzeaBB28GbKxfApHY
 ysNF5Q5oGMwTaL322vpFOmk/a5rHrSI8KJloDzTWxAPbNRIf3fUhwl1imSbGB6RP
 wWwuBCfbTcvw9+F4bK2W3q+umSg7o9zPwwno7Invh/nPqe5ExrVuzalRG4+1vtXe
 3jBKWTVFYX2KPDBpAfaMItehGPeGJet7+mU4GcW1FaCtlyE9QqXKfZknplCfKyU=
 =NpSn
 -----END PGP SIGNATURE-----

Merge tag 'rockchip-for-2019.07' of git://git.denx.de/u-boot-rockchip

Improvements and new features:
- improved SPI driver for better read throughput
- refactors initialisation of debug UART init
- restructures header file paths
- adds pinctrl improvements

Adds Kever as a co-custodian.
2019-05-01 11:52:04 -04:00
Tom Rini
b4ee6daad7 Porting to DM and i.MX8
------------------------
 
 - warp7 to DM
 - kp_imx53 to DM
 - Warnings in DT
 - MX8QM support
 - colibri-imx6ull to DM
 - imx7d-pico to DM
 - ocotp for MX8
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAlzDBtoPHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et3UpQL/ipaUejQOOr00oOgUBQqt3JCPZ7KNu8ruih/
 nIFUDrI8nP+4psaOhRp1sEPFJUxUjdIqODeAZD8zrlEi1pXNAgPWYrFRfbz54bzw
 jLsqqMz1/djQseLydQTcqZTSz8Ys7o+8OfKH64fdsZn+y9no9tHBN5hz5qWdXexN
 kbyykkg8TJC3eUyRZqKuULOqzDV9BAdASOXu7UTa04sEekLdVvS2+zkUdB6UVZTN
 LOAzm+7xY8Tey1BZxLuZUJDpHzFEMvPvlbbQRrxeDn/feZJwNgIP6hGcMeVOwOIf
 KEwFn/m/HI2JWS4taXb5aT+v3xmiQvyCC3jNW0XTf5rq02pbfgyPsVhGQIGyU2yY
 Fj7zIN7hVCLJNBpctvXyuAd1MjOlGEPIrHNjRnIZjtr7/iA1AIRn7Hg4cGNCHw6V
 5gdza3B/xFODN+Ts6O+UVIukI61MJ6mGGdNCueOnWDviNROOL82D7Jh02KfNNNxR
 q+yPsHSpo6rC1MGXv4SOReZtgpng/w==
 =CzWQ
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20190426' of git://git.denx.de/u-boot-imx

Porting to DM and i.MX8
------------------------

- warp7 to DM
- kp_imx53 to DM
- Warnings in DT
- MX8QM support
- colibri-imx6ull to DM
- imx7d-pico to DM
- ocotp for MX8
2019-05-01 07:25:51 -04:00
Kever Yang
15f09a1a83 rockchip: use 'arch-rockchip' as header file path
Rockchip use 'arch-rockchip' instead of arch-$(SOC) as common
header file path, so that we can get the correct path directly.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-05-01 00:00:05 +02:00
Jagan Teki
ed9c9059f2 rockchip: rk3399: Add Orangepi RK3399 support
Add initial support for Orangepi RK3399 board.

Specification
- Rockchip RK3399
- 2GB/4GB DDR3
- 16GB eMMC
- SD card slot
- RTL8211E 1Gbps
- AP6356S WiFI/BT
- HDMI In/Out, DP, MIPI DSI/CSI
- Mini PCIe
- Sensors, Keys etc
- DC12V-2A and DC5V-2A

Commit details about Linux DTS sync:
"arm64: dts: rockchip: Add support for the Orange Pi RK3399"
(sha1: d3e71487a790979057c0fdbf32f85033639c16e6)

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-05-01 00:00:05 +02:00
Hannes Schmelzer
1d260739bd board/BuR/brxre1: use common resetcontroller implementation
The handling of regarding bootmode and early setup has been moved to
central location 'common/br_resetc.c', so use this on brxre1 board.

Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2019-04-26 17:51:51 -04:00
Hannes Schmelzer
2b1e242423 board/BuR/brxre1: cosmetic cleanup
- fixup coding style
- drop unused 'PUSH_KEY' define

Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2019-04-26 17:51:51 -04:00
Hannes Schmelzer
f4b9f0bdba board/BuR/common: add br resetcontoller implementation
On many B&R boards we have a reset-controller, responsible for very
early board-bringup (voltages, clocks, ...) and bootmode selection.

To be ready for adding more B&R boards to source tree while avoiding
duplicate code, we add the resetcontroller implementation to the common
part of B&R boards.

Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2019-04-26 17:51:51 -04:00
Hannes Schmelzer
2fac7a8294 board/BuR/common: add 'brdefaulip_setup' function
Many B&R boards are equipped with an I2C-EEPROM where various
information can be stored.

Today there is only a single byte for 'board_id' used.

We write this 'board_id' into environment for later use during boot.

If the value != 0xFF, meaning the byte is programmed, we modify the
"brdefaultip" environment variable for setting an IP-Address based on
board_id.

Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2019-04-26 17:51:51 -04:00
Hannes Schmelzer
47656d98bd board/BuR/common: cosmetic: move 'overwrite_console' up to more related stuff
Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2019-04-26 17:51:51 -04:00
Hannes Schmelzer
ad6be25c19 board/BuR/common: prepare for compiling common into non AM33XX boards
Today the BuR common stuff is only used on AM33XX boards. In future we
plan to have many other platforms than AM33XX so we have to move arch-
specific #include(s) to responsible #ifdef sections. By the way we drop
unneeded #include(s).

Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2019-04-26 17:51:51 -04:00
Tom Rini
07b68b7843 Merge git://git.denx.de/u-boot-marvell
- Add DM based generic watchdog start and reset implementation
  and remove all ad-hoc implementations (Stefan)
- Move mv_sdhci to DM (Pierre)
- Misc turris_omnia updates (Pierre)
- Change openrd targets to correctly build again (size changes
  and fixes to the dts targets) and bring it back into Travis
  builds (Stefan)
- Add Kirkwood db-88f6281-bp board (Chris)
2019-04-26 13:50:00 -04:00
Tom Rini
1c64692df2 Merge branch 'master' of git://git.denx.de/u-boot-socfpga 2019-04-26 13:49:58 -04:00
Stefan Roese
b684d4031b arm: kirkwood: openrd: Mark openrd boards as maintained again
With the latest size increase of the openrd boards, they all compile
clean again. Let's mark them as maintained again and add the Travis
job.

Please note that I can only compile-test these targets as I don't
have access to one of those boards.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Albert ARIBAUD <albert-u-boot@aribaud.net>
Cc: Vagrant Cascadian <vagrant@debian.org>
Cc: Chris Packham <judge.packham@gmail.com>
Cc: Tom Rini <trini@konsulko.com>
2019-04-26 09:16:32 +02:00
Stefan Roese
06985289d4 watchdog: Implement generic watchdog_reset() version
This patch tries to implement a generic watchdog_reset() function that
can be used by all boards that want to service the watchdog device in
U-Boot. This watchdog servicing is enabled via CONFIG_WATCHDOG.

Without this approach, new boards or platforms needed to implement a
board specific version of this functionality, mostly copy'ing the same
code over and over again into their board or platforms code base.

With this new generic function, the scattered other functions are now
removed to be replaced by the generic one. The new version also enables
the configuration of the watchdog timeout via the DT "timeout-sec"
property (if enabled via CONFIG_OF_CONTROL).

This patch also adds a new flag to the GD flags, to flag that the
watchdog is ready to use and adds the pointer to the watchdog device
to the GD. This enables us to remove the global "watchdog_dev"
variable, which was prone to cause problems because of its potentially
very early use in watchdog_reset(), even before the BSS is cleared.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Cc: Tom Rini <trini@konsulko.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: "Marek Behún" <marek.behun@nic.cz>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Maxim Sloyko <maxims@google.com>
Cc: Erik van Luijk <evanluijk@interact.nl>
Cc: Ryder Lee <ryder.lee@mediatek.com>
Cc: Weijie Gao <weijie.gao@mediatek.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: "Álvaro Fernández Rojas" <noltari@gmail.com>
Cc: Philippe Reynes <philippe.reynes@softathome.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Tested-by: Michal Simek <michal.simek@xilinx.com> (on zcu100)
2019-04-26 09:16:32 +02:00
Chris Packham
d55254ab77 ARM: kirkwood: add db-88f6281-bp board
This is Marvell's Kirkwood development board. It has the following
features

 - 512M DDR2
 - 2 PCI connectors
 - 1 x1 PCI-e interface
 - 1 Gigabit Ethernet Port
 - 2 SATA Ports
 - USB 2.0 Interface
 - SDIO
 - 128M NAND Flash
 - 16M SPI Flash

It can be strapped to boot from SPI or NAND so there are two defconfigs
(one per boot media).

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2019-04-26 07:35:38 +02:00
Michael Walle
30387ee292 arm: kirkwood: lsxl: add note about sata in README
The boot commands have changed in the environment. Add a note about the
incompatible change and how resolve the issue in the board's README.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2019-04-26 07:35:38 +02:00
Pierre Bourdon
5561943ba2 arm: mvebu: turris_omnia: fix eeprom/mcu device names
Commit c4bd12a7da ("i2c: mux: Generate longer i2c mux name") changed
the naming scheme of i2c devices within a mux. This broke references to
i2c@0 in the Turris Omnia board initialization code.

Signed-off-by: Pierre Bourdon <delroth@gmail.com>
Cc: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Signed-off-by: Stefan Roese <sr@denx.de>
2019-04-26 07:35:38 +02:00
Pierre-Jean Texier
6b503f9e65 warp7: Switch to DM USB
This commit switches to DM USB for warp7 and warp7_bl33 defconfigs.

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-04-25 19:21:00 +02:00
Parthiban Nallathambi
d8d33b6d4d imx: Add variscite DART-6UL Evaluation Kit
Port for the DART-6UL Evaluation Kit SBC. Based on the variscite
DART-6UL iMX6ULL SoM.

CPU:   Freescale i.MX6ULL rev1.1 900 MHz (running at 396 MHz)
CPU:   Commercial temperature grade (0C to 95C) at 43C
Reset cause: POR
Model: Variscite DART-6UL Evaluation Kit
Board: Variscite DART-6UL Evaluation Kit
DRAM:  512 MiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
In:    serial@02020000
Out:   serial@02020000
Err:   serial@02020000
Net:   FEC0

Working:
 - Eth0
 - i2c
 - MMC/SD
 - eMMC
 - USB host
 - UART 1

Note: LCDIF porting needs DM_VIDEO
https://lists.denx.de/pipermail/u-boot/2019-April/365506.html

Signed-off-by: Parthiban Nallathambi <parthitce@gmail.com>
2019-04-25 19:16:24 +02:00
Ludwig Zenz
aa34505653 ARM: imx6: DHCOM i.MX6 PDK: use Kconfig for inclusion of DDR calibration
The four x16 DDR3 are wired in T-topology. From NXP AN4467:
'Although not required, T-Topologies may also benefit from performing
Write Leveling as there are package delays on both the processor and DDR
devices that can be de-skewed by performing Write Leveling. Therefore,
Freescale recommends determining Write Leveling calibration parameters
for all boards, regardless of topology used.'
That is why write level calibration is also done.

Signed-off-by: Ludwig Zenz <lzenz@dh-electronics.com>
2019-04-25 19:16:24 +02:00
Ludwig Zenz
a44ca1346d ARM: imx6: update 1GB DDR3 calibration for DHCOM i.MX6qd PDK
The existing calibration values were found to be incorrect
in comparison to newly determined values.

The new values were generated with the help of 5 boards. They have
been determined with the NXP Utility 'DDR Stress Test (2.9.0)'.

Signed-off-by: Ludwig Zenz <lzenz@dh-electronics.com>
2019-04-25 19:16:24 +02:00
Stefano Babic
04ba62115c imx8qxp_mek: drop warning due to unused variable
Signed-off-by: Stefano Babic <sbabic@denx.de>
2019-04-25 19:16:24 +02:00
Joris Offouga
4e267b92fb pico-imx7d: Convert DM MMC
This patch enable convert DM MMC for imx7d-pico board and variant.

Before the DM conversion only usdhc3 was enabled and therefore it appeared
as MMC 0 to u-boot. After enabling MMC DM though usdhc3 defaults to MMC 2,
which left unattended would drive changes to existing pico-pi bootscripts and
environment variables that rely on mmc 0.

Setup the alias of mmc0 and usdhc3 so that existing pico-imx7d boot code will
work unmodified.

When converting to DM_MMC it is necessary that SPL initializes eMMC
by itself, so move the original eMMC initialization from U-Boot
proper to SPL.

Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-04-25 19:16:24 +02:00
Marcel Ziswiler
6988a3aff7 board: toradex: tdx-cfg-block: add new skus
Add all the latest new SKUs:
- Apalis iMX8 QuadXPlus 2GB Wi-Fi / BT IT
- Apalis iMX8 QuadMax 4GB IT
- Apalis iMX8 QuadPlus 2GB Wi-Fi / BT
- Apalis iMX8 QuadPlus 2GB",
- Colibri iMX8 QuadXPlus 2GB IT
- Colibri iMX8 DualX 1GB Wi-Fi / Bluetooth
- Colibri iMX8 DualX 1GB

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-25 19:16:24 +02:00
Joris Offouga
d5f3a470de pico-imx7d: defconfig Enable DM gpio pinctrl and pinctrl_imx7
This patch is necessary for convert this board to dm driver model

DM GPIO requires gpio_request() to be called explicitly before
doing any gpio operation

Signed-off-by: Joris Offouga <offougajoris@gmail.com>
2019-04-25 19:16:24 +02:00
Marcel Ziswiler
4adc9fc1a8 board: toradex: tdx-cfg-block: clean-up sku handling
Clean-up handling of several SKUs.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-25 19:16:24 +02:00
Marcel Ziswiler
87b32297f5 colibri-imx6ull: migrate usb to using driver model
Migrate USB to using driver model.
Add USBH_PEN GPIO regulator.
While at it also add alias e.g. as required for UMS.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-25 17:03:25 +02:00
Marcel Ziswiler
535800d33f colibri-imx6ull: migrate mmc to using driver model
Migrate MMC to using driver model.
Migrate USDHC to using pinctrl.
While at it also add GPIO1_IO03__OSC32K_32K_OUT pin muxing.
While at it also update copyright period.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-25 17:03:25 +02:00
Marcel Ziswiler
cd69e8ef9b colibri-imx6ull: migrate pinctrl and regulators to dtb/dm
Migrate pinctrl and regulators to device tree resp. driver model:
Ethernet, NAND and UART.
Drop BOARD_EARLY_INIT_F as it is anyway no longer used.
Enable CMD_DM, CMD_MTD, CMD_REGULATOR and DM_REGULATOR_FIXED.
While at it also update copyright period.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-25 17:03:25 +02:00
Philippe Schenker
c2f38bf0a0 board: imx6ull: Add disable PMIC_STBY_REQ
Disable output driver of PAD CCM_PMIC_STBY_REQ. This prevents the
SOC to request for a lower voltage during sleep. This is necessary
because the voltage is changing too slow for the SOC to wake up
properly.

Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-25 17:03:25 +02:00
Marcel Ziswiler
70a0467b92 colibri-imx6ull: fix ethernet phy power on
Just give the new Ethernet PHY power save mode circuitry time to settle.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-25 17:03:25 +02:00
Stefan Agner
1560e12eff colibri-imx6ull: set module variant depending on config block
Using CPU temperature grading as a discriminator if the Wi-Fi /
Bluetooth chip is populated is no longer possible due to upcoming
SKUs. Set variant to -wifi only if a valid config block is present
and the product id mentions a SKU with Wi-Fi / Bluetooth.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-25 17:03:25 +02:00
Stefan Agner
89315f319c tdx-cfg-block: simplify i.MX 6 module detection
Use CONFIG_TARGET_... at compile time to differentiate between
Apalis iMX6, Colibri iMX6 and Colibri iMX6ULL. Avoid code
duplication by moving question about Wi-Fi / Bluetooth before
IT/non-IT decision.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-25 17:03:25 +02:00
Gerard Salvatella
08f8055521 tdx-cfg-block: add support for new colibri iMX6ull skus
Add support for new Colibri iMX6ULL SKUs.

While at it also checkpatch fix the whole files.

Signed-off-by: Gerard Salvatella <gerard.salvatella@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-25 17:03:25 +02:00
Marcel Ziswiler
09cc20741d colibri_vf: fix tab vs. spaces
Fix indentation using tab vs. spaces.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-25 17:03:25 +02:00
Peng Fan
0d331c035a imx: support i.MX8QM MEK board
Add i.MX8QM MEK board support.
Included a basic dts, enabled SPL FIT

Boot log as below:
U-Boot SPL 2019.01-rc1-00029-gf002213219 (Dec 24 2018 - 10:28:30 +0800)
Normal Boot
Trying to boot from MMC2_2

U-Boot 2019.01-rc1-00029-gf002213219 (Dec 24 2018 - 10:28:30 +0800)

CPU:   NXP i.MX8QM RevB A53 at 142933 MHz

Model: Freescale i.MX8QM MEK
Board: iMX8QM MEK
Build: SCFW 9330215b
Boot:  SD1
DRAM:  6 GiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
Loading Environment from MMC... *** Warning - bad CRC, using default environment

In:    serial@5a060000
Out:   serial@5a060000
Err:   serial@5a060000
Net:
Error: ethernet@5b040000 address not set.
eth-1: ethernet@5b040000
Hit any key to stop autoboot:  0

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-04-25 17:03:25 +02:00
Lukasz Majewski
fbd611897a boot.src: Provide dsa_core.blacklist bootarg when booting via NFS
This setup is a bit special as Linux kernel (4.19) is not supporting
in-kernel NFS rootfs mount and Distributed Switch Architecture (DSA)
operation.

For that reason it was necessary to provide a bootarg to allow userspace
enable it afterwards if needed.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-25 17:03:25 +02:00
Lukasz Majewski
414ba7cda3 ARM: Remove EHCI specific code from HSC|DDC board file
As EHCI on i.MX5 has been converted to driver model, the board specific
code, necessary for VBUS USB power supply setup is not needed anymore.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-25 17:03:25 +02:00
Lukasz Majewski
63984abc1d ARM: Remove non DM/DTS esdhc3 code from HSC|DDC board related files
After switching to DM/DTS support of esdhc3 - the code in this patch
can be removed.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-25 17:03:25 +02:00
Lukasz Majewski
dbf61531c7 ARM: Remove HSC|DDC ETH PHY reset code after switching to DM/DTS
After commit efd0b79106 ("eth: dm: fec: Add gpio phy reset binding")
the in-board file definition of ETH PHY reset can be removed.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-25 17:03:25 +02:00
Peng Fan
e5b8f7e665 imx8qxp: mek: enable dm-spl for pm
with u-boot,dm-spl added for imx8qx-pm node, and SPL_SIMPLE_BUS enabled,
the bind and probe code in board file could be removed.

Also we need to enlarge SYS_MALLOC_F_LEN to avoid calloc fail.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-04-25 17:03:25 +02:00
Simon Goldschmidt
0b7eb4337d arm: socfpga: move vining_fpga to DM_I2C
All socfpga boards except for vining_fpga use DM_I2C. Enable
DM_I2C for this board and set the EEPROM defines via Kconfig
(enabling CONFIG_I2C_EEPROM from MISC).

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Series-changes: 2
- added (this) patch to move socfpga_vining to DM_I2C
2019-04-25 00:00:49 +02:00
Simon Goldschmidt
d1aa159d99 arm: socfpga: socrates: make rtc work
This patch makes the on-board RTC work on the socfpga_socrates board.
This rtc is present on the board, but it does not work (fails with a
timeout).

This patch adds a weak pull-up on the I2C0-SCL pin connected to the m41t82
RTC on this board. While the SDA line has a pull-up on the pcb, the pull-up
on the SCL line seems to be missing. To work around this, enable the
weak-pull-up feature on this pin.

After applying this patch, the rtc timeout is gone and the 'date' command
can access the rtc chip.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2019-04-25 00:00:49 +02:00
Tom Rini
7d99406742 Various minor sandbox iumprovements
Fixes for tracing with sandbox
 Refactoring for boot_get_fdt()
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAlzAfvkACgkQfxc6PpAI
 reYu9AgAjaFmydXjE8DxkSB3rR7DHZFTs1erVKAAL2v+Tdf7LDmz+j6u1M3v55WY
 6r54f/gZ1UX5TEmQgEAKLa7QvvRO/lNvSGQnLHhZhv2IVWo7uWCKAUPdQ6XVZnUK
 zO5v+ucs9Ne4HxQJHMC509HUIIBbydiRvUm8W0SeBZy4kEyJDuub4L+rpARkXNks
 IZfKuY+VS4FK73D4M9PIhoXSubZgVS4AEcapakU1DvEz0kjsN4wr4idGrp3lutPC
 455imz83JBq2+mx1oxclOGedkIDzTCq+nWQAwSftMehrJpGrp7RLNo0v4QZZUf4V
 LIXRqObIYse9yQLkYPpeBdePMc8/tQ==
 =0NJ2
 -----END PGP SIGNATURE-----

Merge tag 'pull-24apr19' of git://git.denx.de/u-boot-dm

Various minor sandbox iumprovements
Fixes for tracing with sandbox
Refactoring for boot_get_fdt()
2019-04-24 12:27:29 -04:00
Tom Rini
c2bb9c5b9e STM32 MCUs update:
_ DT rework and alignment with DT kernel v4.20
 _ mmc: arm_pl180_mmci: Synchronize compatible with kernel v4.20
 _ mmc: stm32_sdmmc2: Synchronize properties with kernel v4.20
 _ configs: update for F746/769 boards
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJcvxeXAAoJEMrHeC97M/+mkpgP/0Xi+pN81lXGEELdVARyu3o9
 g45Ap+xgARgMwtnwtDmx/7tbawieG7F7Gq/AcY+SOod4qIUfb+1LZ/7UMikzXfbG
 VsSFm1YtxTiHIldPAs+i5MU0OO8TphHpqEtI7kj6eAa3MwYYnhd4DTqI/qahexeU
 3FXnUZg6XhURj1Hp/k4lL+8aoEgQKrjPpSq6oKtbF2rUStwyWbZ2PDYbI19RCU6I
 So58wSQYt0W5CP/dbUDydKorjLirHEvj7ppiGMjwaFjSdipOblrinjLSJ2fVPosF
 EK5lG3AOdf4telYafuq2Ur6EXdGOP1HHdsRhUYBCbZchzGLbH2sGdAs2xHUEsxzV
 80+uE5grX46yAQAj2V8ogpIrP6E4PA4pwEZctsS+4tgUhz9NO7kxFooGmNUk5BkY
 ggtXRlYlmXEz+epoXL7Hr5XkHOObkPk5W/R8JiZqRNv4y3NovYbjqAwYYhPCG60k
 jzwT3BdZJDN28gBU57d60VPEhPQHzpoXc6v3rJ08uFhFms03iz7pj9gCsreF48A9
 jQPZ2nemFt4m4LBsKtihLhvb6t6EllOBkCvbYCD6zgebcjUOscJTq3/TnHrMiNBh
 6wUorR09Bn7iMqhs/rPzUUmwDSN9O78P6uBr/D1E8zA9t/mCPHJHVbUHzrB96UGI
 LA7QA1pWbuYtoVSYa09W
 =0eSL
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-mcu-20190423' of https://github.com/pchotard/u-boot

STM32 MCUs update:
- DT rework and alignment with DT kernel v4.20
- mmc: arm_pl180_mmci: Synchronize compatible with kernel v4.20
- mmc: stm32_sdmmc2: Synchronize properties with kernel v4.20
- configs: update for F746/769 boards
2019-04-24 12:26:39 -04:00
Tom Rini
ceb6ddbc73 - Add support for Amlogic p200 & p201 Reference Designs
- Add Amlogic SoC information display
 - Add support for the Libretech-AC AML-S805X-AC board
 - Add Amlogic AXG reset compatible
 - Add I2C support for Amlogic AXG
 - Fix AXG PIN and BANK pinctrl definitions
 - Fix regmap_read_poll_timeout warning about sandbox_timer_add_offset
 - Add initial support for Amlogic G12A SoC and U200 board
 - Enable PHY_REALTEK for selected boards
 - Fix Khadas VIM2 README
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJcvtmpAAoJEHfc29rIyEnRc78P/0vN7zuxfSganTctZJGyrika
 9i3aIwr03KaFJJKg2FpnjMvdoYfjbuQoJmCdtgyO5Gzw/E5m3b8zbOwxoXW0r8Mg
 56fTSh8my8XHxnrc+Ryv+qwnf8SRIDv7apNqk6vpmnq3OC6di/Z/BBi7jT/ptNm+
 fT/VvQDZkPl5Em3kO1899dpZ7mk5WBwrBeD3R8hrrHtpF45zlRXKPIA/rlcT01DD
 w1gKL7n8NNuV+PHB7fh+xYYW7XkZpINqg6RbEi4w/DpM9Piys4XlB8+W361OkU3O
 Mk0u4omb6ahVIzV7AT4/Xz7B6edO/JpuCkLF0CCIzWo6TBT4Dpkz2h0wVaUCuZBC
 /mykRIgYmFCtdFuUuklf12xKA2VzNfEqk+mzyohDwTxdpWnKZOyX+OfR6Y2PKL8Y
 qSSDYkgucf16SIDBXu8/uVI0RCLtCfza68/Py63Hu9tzFWrG3tC94j3xmXAt+gBA
 Rg25xQ+KfX6oEGbHpViBJDLDWZDzqRPlkAdp3mb08Zpq9cynQSfM5dyS02YnEod7
 80uyva2Bq8S5a2NQYtLJRim54N2rM4srgFFFS0Qw4Feqv7KRkbZl37mTraOLKFo+
 h8t2EQnlaiIzWEKwXmgd7eXS3wV3lsVDn1q/UzBdqkPgp4HQcBsUONh5dxrD5Bvq
 bm6hYo2+hqt583THUltr
 =Qb3V
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20190423' of git://git.denx.de/u-boot-amlogic

- Add support for Amlogic p200 & p201 Reference Designs
- Add Amlogic SoC information display
- Add support for the Libretech-AC AML-S805X-AC board
- Add Amlogic AXG reset compatible
- Add I2C support for Amlogic AXG
- Fix AXG PIN and BANK pinctrl definitions
- Fix regmap_read_poll_timeout warning about sandbox_timer_add_offset
- Add initial support for Amlogic G12A SoC and U200 board
- Enable PHY_REALTEK for selected boards
- Fix Khadas VIM2 README
2019-04-24 12:26:25 -04:00
Simon Glass
a1396cdc4b sandbox: Move pre-console buffer out of the way of tracing
These two buffers currently conflict if tracing is enabled. Move the
pre-console buffer and update the documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>
2019-04-23 20:26:43 -06:00
Simon Glass
001d1885f0 sandbox: Improve debugging in initcall_run_list()
At present if one of the initcalls fails on sandbox the address printing
is not help, e.g.:

  initcall sequence 0000557678967c80 failed at call 00005576709dfe1f (err=-96)

This is because U-Boot gets relocated high into memory and the relocation
offset (gd->reloc_off) does not work correctly for sandbox.

Add support for finding the base address of the text region (at least on
Linux) and use that to set the relocation offset. This makes the output
better:

  initcall sequence 0000560775957c80 failed at call 0000000000048134 (err=-96)

Then you use can use grep to see which init call failed, e.g.:

   $ grep 0000000000048134 u-boot.map
   stdio_add_devices

Of course another option is to run it with a debugger such as gdb:

   $ gdb u-boot
   ...
   (gdb) br initcall.h:41
   Breakpoint 1 at 0x4db9d: initcall.h:41. (2 locations)

Note that two locations are reported, since this function is used in both
board_init_f() and board_init_r().

   (gdb) r
   Starting program: /tmp/b/sandbox/u-boot
   [Thread debugging using libthread_db enabled]
   Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".

   U-Boot 2018.09-00264-ge0c2ba9814-dirty (Sep 22 2018 - 12:21:46 -0600)

   DRAM:  128 MiB
   MMC:

Breakpoint 1, initcall_run_list (init_sequence=0x5555559619e0 <init_sequence_f>)
    at /scratch/sglass/cosarm/src/third_party/u-boot/files/include/initcall.h:41
41				printf("initcall sequence %p failed at call %p (err=%d)\n",
   (gdb) print *init_fnc_ptr
   $1 = (const init_fnc_t) 0x55555559c114 <stdio_add_devices>
   (gdb)

Signed-off-by: Simon Glass <sjg@chromium.org>
2019-04-23 20:26:43 -06:00
Adam Ford
248b873541 ARM: da850evm: Remove legacy MMC code
With the migration to DM in SPL and the DT support, the
old legacy code is no longer neaded, so this patch removes it

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-04-23 17:57:23 -04:00
Patrice Chotard
77594d7fbf board: stm32f746-disco: Get MII/RMII phy_mode from DT
This is needed to make ethernet work on stm32f746-eval which
uses MII mode.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-04-23 15:31:48 +02:00
Neil Armstrong
c6e4e8f99c board: amlogic-q200: fix Khadas VIM2 README
The vendor U-boot branch and defconfig was wrong for the
Khadas VIM2, fix this.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-04-23 11:19:59 +02:00
Jerome Brunet
b050a30016 boards: meson: add g12a u200
The Amlogic U200 board is based on the Amlogic S905D2 SoC
from the Amlogic G12A SoC family.

The board has the following specifications :
 - Amlogic S905D2 ARM Cortex-A53 quad-core SoC
 - XGB DDR4 SDRAM
 - 10/100 Ethernet (Internal PHY)
 - 1 x USB 3.0 Host
 - eMMC
 - SDcard
 - Infrared receiver
 - SDIO WiFi Module
 - MIPI DSI Connector
 - Audio HAT Connector
 - PCI-E M.2 Connector

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-04-23 11:19:09 +02:00
Neil Armstrong
d0a9b82b75 regmap: fix regmap_read_poll_timeout warning about sandbox_timer_add_offset
When fixing sandbox test for regmap_read_poll_timeout(), the
sandbox_timer_add_offset was introduced but only defined in sandbox code
thus generating warnings when used out of sandbox :

include/regmap.h:289:2: note: in expansion of macro 'regmap_read_poll_timeout_test'
regmap_read_poll_timeout_test(map, addr, val, cond, sleep_us, \
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/spi/meson_spifc.c:169:8: note: in expansion of macro 'regmap_read_poll_timeout'
ret = regmap_read_poll_timeout(spifc->regmap, REG_SLAVE, data,
        ^~~~~~~~~~~~~~~~~~~~~~~~
drivers/spi/meson_spifc.c: In function 'meson_spifc_txrx':
include/regmap.h:277:4: warning: implicit declaration of function 'sandbox_timer_add_offset' [-Wimplicit-function-declaration]

This fix adds a timer_test_add_offset() only defined in sandbox, and
renames the previous sandbox_timer_add_offset() to it.

Cc: Simon Glass <sjg@chromium.org>
Reported-by: Tom Rini <trini@konsulko.com>
Fixes: df9cf1cc08 ("test: dm: regmap: Fix the long test delay")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-04-23 11:17:15 +02:00
Tom Rini
8a94262435 Second set of u-boot-atmel features and fixes for 2019.07 cycle
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJcvW07AAoJEB6zHgIOrC/Iu4QH/1REDOTrsZPydd2yD/O81vPs
 RiLC8wP2J4UmqtMcNTLyvxlYwrzqoR5J6SYdyBNU/+cLEp/gdzEI+rjsfSV2uRX1
 Qb4Pk2FiI503JVjegxsbJqzASfiEP7rIg3HM5431xbhYH22MW2FH6le6yrtNxjBh
 m1WFjQYX1bpbGb6zue8TgyLIeN1IqWuqnH9kUHixUEan+xrpEhN239LDFjdvGbvC
 BvYyMtDddmMt4YDzNjgX36us993kylGZp6JijR3zgUao7I/JGVZAJrxw8MHDTnVy
 UKv3VI9F5bGLSvzqTVL2MFU6XtJW26v+niGLhGzlUhb3TTKrdKOicm3VF7tO+JU=
 =MamK
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-atmel-2019.07-b' of git://git.denx.de/u-boot-atmel

Second set of u-boot-atmel features and fixes for 2019.07 cycle
2019-04-22 10:28:21 -04:00
Patrick Delaunay
6fe7dd3327 stm32mp1: add stusb1600 support for DK1 and DK2 board
The DK1 and DK2 boards use the USB Type-C controller STUSB1600.
This patch updates:
- the device tree to add the I2C node in the DT
- the board stm32mp1 to probe this I2C device and use this controller
  to check cable detection.
- the DWC2 driver to support a new dt property
  "u-boot,force-b-session-valid" which forces B session and
  device mode; it is a workaround because the VBUS sensing and
  ID detection isn't available with stusb1600.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-04-21 10:26:52 +02:00
Patrick Delaunay
c31000c534 stm32mp1: migrate USBOTG device to driver model
Use the DWC2 device driver with DM_USB_GADGET support and
cleanup the USB support in STM32MP1 board.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-21 10:26:52 +02:00
Clément Péron
517ee64205 arm: dts: h6: Add Beelink GS1 initial support
Beelink GS1 is an Allwinner H6 based TV box,
which support:
- Allwinner H6 Quad-core 64-bit ARM Cortex-A53
- GPU Mali-T720
- 2GB LPDDR3 RAM
- 16GB eMMC
- AXP805 PMIC
- 1Gbps GMAC via RTL8211E
- USB 2.0 and 3.0 Host
- HDMI port
- S/PDIF port
- 5V/2A DC power supply
- Wi-Fi/BT via Fn-Link 6222B-SRB (RTL8222BS)

Linux commit details about the sun50i-h6-beelink-gs1.dts sync:
"arm64: dts: allwinner: h6: Introduce Beelink GS1 board"
(sha1: 089bee8dd119ba084dee6b17a2e1a53df4f30193)

Signed-off-by: Clément Péron <peron.clem@gmail.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-18 22:14:34 +05:30
Tom Rini
1f4ae66eaa Merge tag 'arc-for-2019.07' of git://git.denx.de/u-boot-arc
In this small series we migrate ARC boards to DM_MMC
so we're hopefully are good now and our boards will be kept
in U-Boot for some more time :)
2019-04-18 12:12:16 -04:00
Eugen Hristev
f085452d85 board: atmel: add SAMA5D2 ICP board
The SAMA5D2 ICP Board features the SAMA5D27 SoC,
together with QSPI Flash, Wilc3000 wireless device and
EtherCat support.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-04-18 09:43:22 +03:00
Eugeniy Paltsev
cc2f7b6c7d ARC: [plat-axs10x]: migrate to DM_MMC
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2019-04-18 09:12:38 +03:00
Eugeniy Paltsev
54858311df ARC: [plat-hsdk]: migrate to DM_MMC
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2019-04-18 09:12:38 +03:00
Uri Mashiach
ecb76eff56 arm: am57xx: cl-som-am57x: remove board support
U-Boot support for the CL-SOM-AM57x module is no longer required.

Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
2019-04-17 09:20:26 -04:00
Tom Rini
4b37f36d68 Merge branch 'master' of git://git.denx.de/u-boot-sunxi
- Convert DM_MMC and DM_SCSI
- A20, R40, H6 Linux dts(i) sync
- CLK, RESET support for sunxi, sun8_emac net drivers
2019-04-17 09:19:45 -04:00
Tom Rini
14b8c420b8 Xilinx/FPGA changes for v2019.07
fpga:
 - Add support for external data in FIT
 - Extend testing for external data case
 - Inform user about a need to run post config on Zynq
 
 arm:
 - Tune zynq command functions
 - Fix internal variable setting
 
 arm64:
 - Add support for zc39dr decoding
 - Disable WDT for zcu100
 - Small changes in reset_reason()
 - Some DT changes (spi)
 - Tune qspi-mini configuration
 - Remove useless eeprom setting
 - Fix two sdhci boot case
 
 spi:
 - Fix tap delay programming
 
 clk:
 - Enable i2c in SPL
 
 net:
 - Fix gem phydev handling
 - Remove phy detection code from gem driver
 
 general:
 - Correct EXT_DTB usage for MULTI_DTB_FIT configuration
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAly262oACgkQykllyylKDCH44gCbBnuxUH6ZF0B7Leuee4te7C59
 LmUAn14/bbtMt17zkMSADCjY9yGWF4au
 =mWrW
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2019.07' of git://git.denx.de/u-boot-microblaze

Xilinx/FPGA changes for v2019.07

fpga:
- Add support for external data in FIT
- Extend testing for external data case
- Inform user about a need to run post config on Zynq

arm:
- Tune zynq command functions
- Fix internal variable setting

arm64:
- Add support for zc39dr decoding
- Disable WDT for zcu100
- Small changes in reset_reason()
- Some DT changes (spi)
- Tune qspi-mini configuration
- Remove useless eeprom setting
- Fix two sdhci boot case

spi:
- Fix tap delay programming

clk:
- Enable i2c in SPL

net:
- Fix gem phydev handling
- Remove phy detection code from gem driver

general:
- Correct EXT_DTB usage for MULTI_DTB_FIT configuration
2019-04-17 09:19:13 -04:00
Andre Przywara
f8c8669760 sunxi: update SATA driver to always use DM_SCSI
It seems like the Allwinner SATA driver is already quite capable of
using the driver model, so we can force this on all boards and can
remove support for a non-DM_SCSI build.
This removes the warning about boards with SATA ports not being
DM_SCSI compliant.

It also takes the opportunity to move the driver out of the board/sunxi
directory to join its siblings in drivers/ata, and to make it a proper
Kconfig citizen.

The board defconfigs stay untouched.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagan Teki <jagan@openedev.com>
[jagan: select DM_SCSI separately]
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-17 14:34:45 +05:30
Jagan Teki
cbb9cdc7aa board: sunxi: Add R40 sata compatible
Add sata compatible for R40.

Cc: Pablo Sebastián Greco <pgreco@centosproject.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-17 14:34:45 +05:30
Jagan Teki
99a8a3114f board: sunxi: gmac: Remove Ethernet clock and reset
Since Ethernet clock and reset is now handling via
CLK and RESET frameworks via driver API's remove
explicit ccm writes.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-16 16:29:01 +05:30
Siva Durga Prasad Paladugu
c7490907d1 arm64: zynqmp: Add idcode for new RFSoC silicon ZU39DR
This patch adds "zu39dr" to the list of zynqmp devices
The zu39DR is the new RFSoC silicon with id value of 0x66.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-16 11:51:34 +02:00
T Karthik Reddy
958d1b1882 ARM: zynq: Check zynq aes & rsa command parameters count
This patch checks for zynq aes & rsa commands max parameters count. Also
checks minimum number of parameters count for aes command.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-16 11:51:34 +02:00
T Karthik Reddy
be52372ff1 arm64: zynqmp: Use zynqmp_mmio_read/write functions
Changed the return type of reset_reason() to int from u32, because
zynqmp_mmio_read/write() returns signed value on error.
Replaced readl and writel functions with zynqmp_mmio_read &
zynqmp_mmio_write functions to access RESET_REASON(CRL_APB) registers.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-16 11:51:34 +02:00
Tom Rini
75ce8c938d Move to DM
-----------
 
 - DM support in sata
 - Toradex Board to DM
 - wandboard to DM
 - tbs2910 to DM
 - GE boards to DM
 - VHybrid boards to DM
 - DM_VIDEO for i.MX
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAly0NhIPHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et3XiUMALq2W4HPjFlDaVHpaxKIvZMkqAAjF7eE6M9l
 DWivSm/Anm5jeE2UM80FpV7npdkPMcOl2YdcIjg+jMKKP6DI+4N6gEhWvxX9mEoC
 RmR2nxGC/GIc0Blb4HU9V6xMkeR5jSAQ6bxZmX3IrnG6u67BIi4NmkNrT9gdQ+WT
 PkJf2Ai7DN7+epfOzjO0d/LjS3hAVb+nesHuxoVraElwc5sEMAnoD0vIMUrXceZ2
 +V6WiU1i9jeLj3fA8P+4o6wqQpxFLlJiuC0FUNKQH/kWIqX6MGrr9ElseLUV0O+Z
 LL5nqsuTgG/fAol1r71De49fiML2Pfx7ZkAZOJ1NMUOXUKw25ulO/wi0wg8t+l2Z
 2oAQ3S84RUVYX4MFLwxkBCq3uC9hvyCfWF1GmVLV6xSEulS6PnHx0FL6OTY4uB3h
 bmVs/mutwwqYBaaoqGG4sG5L7TVSG/JxNgTVNh3Aqj5a89Fd9us+nBhLhoq6xyVl
 cEf+/gPGQ97JEj9DolAPFIFQJBvL7g==
 =KLsH
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20190415' of git://git.denx.de/u-boot-imx

Move to DM
-----------

- DM support in sata
- Toradex Board to DM
- wandboard to DM
- tbs2910 to DM
- GE boards to DM
- VHybrid boards to DM
- DM_VIDEO for i.MX
2019-04-15 07:31:14 -04:00
Tom Rini
216800acf1 Merge branch 'master' of git://git.denx.de/u-boot-spi
Conflicts:
	arch/arm/dts/armada-385-amc.dts
	arch/arm/dts/armada-xp-theadorable.dts
	arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi

Signed-off-by: Tom Rini <trini@konsulko.com>
2019-04-14 00:03:06 -04:00
Anatolij Gustschin
c77ea32ed8 imx: aristainetos: fix build breakage
ipu.h header is not found since the ipuv3 driver was moved to
the drivers/video/imx subdirectory. Fix it.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-04-13 20:30:10 +02:00
Marcel Ziswiler
ccdd37130b tdx-cfg-block: fix off by one issue
Fix toradex_modules array off by one issue potentially leading to
spurious printout during boot e.g.

    Model: Toradex  V1.2A,

instead of

    Model: Toradex UNKNOWN MODULE V1.2A.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-13 20:30:10 +02:00
Bhuvanchandra DV
43bfc49992 toradex: common: unify behaviour when config block is missing
If the config block is missing, various things may fail or behave
strangely on certain modules. This patch unifies that behaviour by
using a fake MAC address, until user updates the config block.

Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-13 20:30:10 +02:00
Dominik Sliwa
587b13c69c toradex: configblock: add an -y parameter to 'cfgblock create’
Add an optional -y parameter to 'cfgblock create’ to simplify
automation.

Signed-off-by: Dominik Sliwa <dominik.sliwa@toradex.com>
Acked-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-13 20:30:09 +02:00
Stefan Agner
afda2ace8a colibri_vf: use leveling evaluated by DDR validation tools
The DDR validation tool (which is part of Processor Expert) allows
to evaluate leveling parameters for CR105/CR106/CR110. Several
runs have been made with Colibri VF50 and VF61 and it seems to
evaluate very similar values. Use this values by default.

Note: The newly evaluated parameters seem to require CTLUPD_AREF
to be enabled!

Note 2: The tool also evaluated 6 as a new value for PHY02/18
GATE_CFG (Coarse adjust of gate open time). However, this seems
not to work in practise.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13 20:30:09 +02:00
Stefan Agner
be24fc7807 colibri_vf: adjust timing according to data sheet
Using the DDR Validation tool in Processor Expert uncovered two
timing inconsistencies. Since those timings are related to the
suspend mode they do not affect or change regular memory behaviour.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-13 20:30:09 +02:00
Bhuvanchandra DV
da4cc0b63a colibri_vf: sync the board info message
Use similar info message as on other modules.

Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-13 20:30:09 +02:00
Marcel Ziswiler
9f9ecdfffd colibri_vf: migrate fec, esdhc, nfc and usb to driver model
Migrate FEC, ESDHC, NFC and USB to driver model.

While at it also do no longer enable optional I2C clock in board file as
the generic clock code now handles this. Note for space reason and as
it is not required just for booting we do not enable I2C in U-Boot by
default.

While at it also update copyright period.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-13 20:30:09 +02:00
Marcel Ziswiler
6d277bc323 colibri_vf: migrate pinctrl and regulators to dtb/dm
Migrate pinctrl and regulators to device tree resp. driver model: DDR,
DSPI, ENET, ESDHC, I2C, NFC and UART.

Enable CMD_DM, PINCTRL and DM_REGULATOR.

While at it also update copyright period and sort include files.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-13 20:30:09 +02:00
Marcel Ziswiler
1854a9c916 ARM: dts: colibri_vf: update device trees
Update device tree in preparation of further driver model migration:
Ethernet FEC, ESDHC aka MMC/SD card, I2C, NFC aka NAND flash controller,
USBH_PEN GPIO regulator.

Add iomux resp. pinctrl entries to be removed from proprietary platform
data: DSPI, ESDHC, FEC, I2C, NFC, UART, USBH_PEN GPIO.

Introduce a U-Boot specific device tree with some required
u-boot,dm-pre-reloc properties: soc, aips0, pinctrl_ddr and uart0 incl.
pinctrl.

While at it also update the MAINTAINERS file.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13 20:30:09 +02:00
Marcel Ziswiler
7b48e2b05a Add missing space in comment
Spotted two missing spaces in comments.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-13 20:30:09 +02:00
Anatolij Gustschin
2cbf1b3215 imx6: wandboard: convert to DM_MMC
Move SDHC init to SPL code since it is not required with
DM_MMC. Enable DM_MMC support.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-04-13 20:30:09 +02:00
Anatolij Gustschin
c609542079 imx6: wandboard: convert to DM_I2C
Allow building with DM_I2C enabled.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-04-13 20:30:09 +02:00
Anatolij Gustschin
ec837c82d7 imx6: wandboard: convert to DM_PMIC
Enable DM_PMIC_PFUZE100 driver and add PMIC description to DTS.
Rework power_init_board() code.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-04-13 20:30:09 +02:00
Anatolij Gustschin
a23ade6d26 imx6: wandboard: convert to DM_GPIO and enable pinctrl driver
Enable DM_GPIO and pinctrl in defconfig and add gpio_request()
calls where required.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-04-13 20:30:09 +02:00
Anatolij Gustschin
4f115e3b9b imx6: wandboard: add device tree
Add device trees from Linux in preparation for driver model
conversions.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-04-13 20:30:09 +02:00
Soeren Moch
01b7e8f6d4 board: tbs2910: Convert mmc to driver model
So we don't need to duplicate settings from the device tree in the board file.

Signed-off-by: Soeren Moch <smoch@web.de>
2019-04-13 20:30:09 +02:00
Soeren Moch
186d95380d board: tbs2910: Convert sata to ahci driver model
While at it, also configure 64-bit LBA support.

Signed-off-by: Soeren Moch <smoch@web.de>
2019-04-13 20:30:09 +02:00
Soeren Moch
f9b0b8d4ee board: tbs2910: Convert i2c and rtc to driver model
So we don't need to duplicate settings from the device tree in the board file.

Signed-off-by: Soeren Moch <smoch@web.de>
2019-04-13 20:30:09 +02:00
Soeren Moch
ab3f5efe02 board: tbs2910: Convert usb to driver model
So we don't need to duplicate settings from the device tree in the board file.

Signed-off-by: Soeren Moch <smoch@web.de>
2019-04-13 20:30:09 +02:00
Soeren Moch
f0b427aca6 board: tbs2910: Add pinctrl driver and convert gpio to driver model
We need this for additional driver model conversions.

Signed-off-by: Soeren Moch <smoch@web.de>
2019-04-13 20:30:09 +02:00
Soeren Moch
b184dc077a board: tbs2910: Add device tree
... as preparation for additional driver model coonversions.

We use CONFIG_OF_EMBED here to keep u-boot.imx as final binary name. So we
maintain compatibility with the original TBS u-boot and available HOWTOs
for u-boot updates.

Signed-off-by: Soeren Moch <smoch@web.de>
2019-04-13 20:30:09 +02:00
Gerard Salvatella
b87ca9907c board: colibri_imx6: check for and report ecc errors in fuses
The PMIC on the Colibri iMX6 may have ECC errors in fuses that will
prevent correct settings. Up to one bit error per fuse bank can be
reported and corrected by the ECC logic. Two bit errors can only be
reported.

Signed-off-by: Gerard Salvatella <gerard.salvatella@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13 20:30:09 +02:00
Gerard Salvatella
82029bf5b3 colibri_imx6: added nreset gpio on reboot
RGMII_RD1 pin (active high, GPIO6_IO27) is triggered on reboot during
the SPL phase. This asserts (active low) nReset_Out from the PMIC.
Only V1.1 and later Colibri iMX6 modules implement this in hw. Previous
versions do not use this pin, so it is safe to leave it enabled at all
times.

Signed-off-by: Gerard Salvatella <gerard.salvatella@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13 20:30:09 +02:00
Stefan Agner
52084bfc80 colibri_imx6: use SDP if USB serial downloader has been used
In case USB serial downloader has been used to load U-Boot start the
serial download protocol (SDP) emulation. This allows to download
complete images such as Toradex Easy Installer over USB SDP as well.
This code uses the boot ROM provided boot information to reliably
detect USB serial downloader.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13 20:30:09 +02:00
Bhuvanchandra DV
bee73083a4 toradex: colibri_imx6: overwrite CMA memory set in device tree
Make sure CMA memory is not greater than 50% of available physical
memory.

Allow user to change the CMA memory via 'cma-size' U-Boot environment
variable.

Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13 20:30:09 +02:00
Max Krummenacher
6218d4bdce colibri_imx6: revert fuse value set in mfgr_fuse
We have two commands to change the bootmode fuses:
mfgr_fuse which set fuse 0/5 and 0/6
and
updt_fuse which burns bit 4 of 0/5.

Before Image 2.6 we fused in mfgr_fuse 0x5062, which boots
from the user partition of the eMMC.
To workaround certain hangs we moved to fastboot mode and
using the first bootpartition of the eMMC requiring a fuse
value of 0x5072 which could be achived by the then added
updt_fuse command. At the same time the mfgr_fuse command
was changed to also fuse 0x5072, revert that second change
so that one can fuse both values, one with just mfgr_fuse
and the later with mfgr_fuse;updt_fuse.

Note that the mfgr_fuse command is only needed at module
production time, a customer might need to use updt_fuse
when upgrading an older module to be compatible with a
newer image. The command is integrated into the image
update scripts.

Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13 20:30:09 +02:00
Max Krummenacher
cbcdf4da82 colibri_imx6: change pmic fusing according to hw 1.1 requirements
Colibri iMX6 V1.1 HW can use the PMIC GEN3 to power the NVCC_SD1.
Change the settings fused into the PMIC's OTP to powerup with
GEN3 set to output 3.3V.

Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13 20:30:09 +02:00
Max Krummenacher
08621424ce colibri imx6: disable ri and dcd irq in uarts
If the UART is used in DTE mode the RI and DCD bits in UCR3 become
irq enable bits. Both are set to enabled after reset and both likely
are pending.

Disable the bits also on UARTs not used in the boot loader to prevent
an interrupt storm when Linux enables the UART interrupts.

Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13 20:30:09 +02:00
Max Krummenacher
c508d22abb colibri imx6: pf0100: reorder and cleanup message printing
Keep debug code at the end of the function.
Use a one line informational message for the PMIC only.

Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13 20:30:09 +02:00
Max Krummenacher
eaa50e08be colibri_imx6: unify sd/mmc drive strenght with linux kernel settings
In the linux device tree we use 40Ohm drive strenght. So use the same
value in U-Boot.

Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13 20:30:09 +02:00
Max Krummenacher
2910c0a135 colibri_imx6: print also 64-bit IT
Print also for Colibri iMX6 512MB IT with 64-bit RAM bus.

Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13 20:30:09 +02:00
Max Krummenacher
1ebb754b20 colibri_imx6: drop CONFIG_OF_SYSTEM_SETUP
This doesn't do anything anymore, probably never did.

Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13 20:30:09 +02:00
Marcel Ziswiler
7b726c0942 colibri_imx6: migrate usb to using driver model
Migrate USB to using driver model.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13 20:30:09 +02:00
Marcel Ziswiler
d141b75cbf colibri_imx6: migrate mmc to using driver model
Migrate MMC to using driver model.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13 20:30:09 +02:00
Marcel Ziswiler
6eea69bd90 colibri_imx6: migrate i2c to using driver model
Migrate I2C to using driver model.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13 20:30:09 +02:00
Marcel Ziswiler
e7cf53497a colibri_imx6: clean-up and migrate gpios to using driver model
Migrate GPIOs to using driver model, properly request backlight, MMC/SD
card detect and USB power enable GPIOs and also enable SION bit in pin
muxing for auxiliary, backlight and USB power enable GPIOs.

While at it also update copyright year, clean-up/re-order includes, add
some comments clarifying ifdef scope and do some white-space clean-up.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13 20:30:09 +02:00
Marcel Ziswiler
50f39bb6f2 colibri_imx6: migrate to using device tree
Migrate to using device tree required for further driver model
integration.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13 20:30:09 +02:00
Marcel Ziswiler
0b2bd9feda colibri_imx6: get rid of obsolete nospl configurations
Now with SPL long since being in place even for recovery using SDP
finally get rid of those nospl configurations.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13 20:30:08 +02:00
Gerard Salvatella
15c41a8d9e board: apalis_imx6: check for and report ecc errors in fuses
The PMIC on Apalis iMX6 may have ECC errors in fuses that will prevent
correct settings. Up to one bit error per fuse bank may be reported and
corrected by the ECC logic. Two bit errors can only be reported.

Signed-off-by: Gerard Salvatella <gerard.salvatella@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13 20:30:08 +02:00
Stefan Agner
15834c6383 apalis_imx6: use SDP if USB serial downloader has been used
In case USB serial downloader has been used to load U-Boot start the
serial download protocol (SDP) emulation. This allows to download
complete images such as Toradex Easy Installer over USB SDP as well.
This code uses the boot ROM provided boot information to reliably
detect USB serial downloader.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13 20:30:08 +02:00
Max Krummenacher
5135db4d8b apalis_imx6: revert fuse value set in mfgr_fuse
We have two commands to change the bootmode fuses:
mfgr_fuse which set fuse 0/5 and 0/6
and
updt_fuse which burns bit 4 of 0/5.

Before BSP 2.6 we fused in mfgr_fuse 0x5062, which boots
from the user partition of the eMMC.
To workaround certain hangs we moved to fastboot mode and
using the first bootpartition of the eMMC requiring a fuse
value of 0x5072 which could be achieved by the then added
updt_fuse command. At the same time the mfgr_fuse command
was changed to also fuse 0x5072, revert that second change
so that one can fuse both values, one with just mfgr_fuse
and the later with mfgr_fuse;updt_fuse.

Note that the mfgr_fuse command is only needed at module
production time, a customer might need to use updt_fuse
when upgrading an older module to be compatible with a
newer image. The command is integrated into the image
update scripts.

Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13 20:30:08 +02:00
Max Krummenacher
389f61ef44 apalis_imx6: disable ri and dcd irq in uarts
If the UART is used in DTE mode the RI and DCD bits in UCR3 become
irq enable bits. Both are set to enabled after reset and both likely
are pending.

Disable the bits also on UARTs not used in the boot loader to prevent
an interrupt storm when Linux enables the UART interrupts.

Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13 20:30:08 +02:00
Marcel Ziswiler
b4707a25d0 apalis_imx6: pf0100: reorder and cleanup message printing
Keep debug code at the end of the function.
Use a one line informational message for the PMIC only.

Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13 20:30:08 +02:00
Max Krummenacher
3ef55a7473 apalis_imx6: unify sd/mmc drive strength with linux kernel settings
In the Linux device tree we use 40Ohm drive strength. So use the same
value in U-Boot.

Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13 20:30:08 +02:00
Marcel Ziswiler
16959d75dd apalis_imx6: drop CONFIG_OF_SYSTEM_SETUP
This doesn't do anything anymore, probably never did.

Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13 20:30:08 +02:00
Marcel Ziswiler
9fb4b8929a apalis_imx6: migrate usb to using driver model
Migrate USB to using driver model.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13 20:30:08 +02:00
Marcel Ziswiler
72b49e2c1e apalis_imx6: migrate mmc and sata to using driver model
Migrate MMC and SATA to using driver model.

While at it also enable SCSI driver model.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13 20:30:08 +02:00
Marcel Ziswiler
ab92352d22 apalis_imx6: migrate i2c to using driver model
Migrate I2C to using driver model.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13 20:30:08 +02:00
Marcel Ziswiler
5177087f64 apalis_imx6: clean-up and migrate gpios to using driver model
Migrate GPIOs to using driver model, properly request backlight,
Ethernet PHY reset, MMC/SD card detect and USB power GPIOs and also
enable SION bit in pin muxing for Apalis, backlight, eMMC reset,
Ethernet PHY reset and USB power enable GPIOs.

While at it also update copyright year, clean-up/re-order includes,
add some comments clarifying ifdef scope and do some White-space
clean-up.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13 20:30:08 +02:00
Marcel Ziswiler
4df0292359 apalis_imx6: migrate to using device tree
Migrate to using device tree required for further driver model
integration.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13 20:30:08 +02:00
Marcel Ziswiler
67ef14c72e apalis_imx6: get rid of obsolete nospl configurations
Now with SPL long since being in place even for recovery using SDP
finally get rid of those nospl configurations.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13 20:30:08 +02:00
Ian Ray
e75a7d099e mx53ppd: bring dock out of reset at boot
Configure GPIO BUFFERED_HOST_CONTROLLED_RESET_TO_DOCKING_CONNECTOR_N to
bring the dock out of reset at boot.

Signed-off-by: Ian Ray <ian.ray@ge.com>
2019-04-13 20:30:08 +02:00
Ian Ray
61c4c2bf1e board: ge: store version information in fdt
Add board-specific FDT function to store U-Boot version in device tree.

Signed-off-by: Ian Ray <ian.ray@ge.com>
2019-04-13 20:30:08 +02:00
Ian Ray
31c9afdd92 board: ge: ppd: Enable CONFIG_DM_MMC
Use MMC device model, and remove USDHC pin configuration code since the
pinctrl driver is used.

Signed-off-by: Ian Ray <ian.ray@ge.com>
2019-04-13 20:30:08 +02:00
Ian Ray
8d8d3540eb board: ge: bx50v3: Enable CONFIG_DM_SPI, CONFIG_DM_SPI_FLASH
Use SPI flash device model, and remove SPI pin configuration code since
the pinctrl driver is used.

Signed-off-by: Ian Ray <ian.ray@ge.com>
2019-04-13 20:30:08 +02:00
Ian Ray
06f2e030d0 board: ge: bx50v3: Enable CONFIG_DM_GPIO
Enable CONFIG_DM_GPIO as a pre-requisite for enabling CONFIG_DM_SPI.

Add explicit gpio_requests.

Signed-off-by: Ian Ray <ian.ray@ge.com>
2019-04-13 20:30:08 +02:00
Ian Ray
efc260a9af board: ge: bx50v3: Enable CONFIG_DM_MMC
Use MMC device model, and remove USDHC pin configuration code since the
pinctrl driver is used.

Signed-off-by: Ian Ray <ian.ray@ge.com>
2019-04-13 20:30:08 +02:00
Lukasz Majewski
bdc9fefcbf pcm052: bk4: Add board_phy_config() for BK4 to setup ksz8081 phy
BK4 requires setup of 50MHz reference clock for its KSZ8081 PHY devices.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-04-13 20:30:08 +02:00
Lukasz Majewski
15a4456903 pcm052: mac: Provide board specific imx_get_mac_from_fuse() function
This commit introduces the board specific function to read fused mac
address.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-13 20:30:08 +02:00
Lukasz Majewski
379255f1ee pcm052: board: Add code to setup LED default states
As one has moved to DM based LEDs, this code is required to setup the
default state.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-13 20:30:08 +02:00
Lukasz Majewski
e5b345f30c pcm052: bk4: sdcard: Add support for SD card booting/recovery
This code allows reusing the default u-boot as in the late board init, the
default envs are restored and proper recovery scripts executed.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-13 20:30:08 +02:00
Lukasz Majewski
27e15e533c pcm052: board: Remove in-board setup code (it is now replaced by DM setup)
This commit cleans up the pcm052.c file to remove dead code after moving to
DTS and DM.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-13 20:30:08 +02:00
Lukasz Majewski
fbe114aa4b pcm052: board: cosmetic: Add copyright notice to pcm052.c
Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-13 20:30:08 +02:00
Lukasz Majewski
5f1588acc2 pcm052: board: vybrid: Update the board name for BK4 device
This commit provides distinction between PCM052 and BK4.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-13 20:30:08 +02:00
Lukasz Majewski
fea63a5d7d pcm052: board: Remove "m4go" command as it is superseded by "bootaux"
The "m4go" provides exactly the same functionality as the IMX generic
"bootaux" command. Remove it to not duplicate the code.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-13 20:30:08 +02:00
Lukasz Majewski
bc51c91120 pcm052: board: Do not enable I2C2 code in the board file
As the I2C2 clock is now enabled in the generic clock code, we can remove
this code from a board file.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13 20:30:08 +02:00
Tom Rini
0a5228be86 - mt76xx: add USB support, small fixes
- ath79: small fixes, add support for QCA9563 SoC and AP152 reference board
 - mscc: small fixes, add network support for JR2 and ServalT SoCs
 - bmips: small fixes, enable more drivers for ARM specific BCM6858 and BCM63158 SoCs
 - MIPS: fix redundant relocation of initrd images
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiQkHUH+J02LLC9InKPlOlyTyXBgFAlywtKQACgkQKPlOlyTy
 XBgYbBAAlRLhN52f2vv9Hng/tfCAuZk7c9tJ+b/5i36ZoJNozeaiOBgwVl3eeEa9
 v4SeKz4J+9FJLOSZkIPrCvX+HaACQn7Pqw/64h3JE8TEzfU5lgmV4Xk2dcXtkmEL
 L5PTQoNMZDgQaeltLtN29yIW5lVxx0NUN9O0FLY5+R/ptXlCFaAGdgSuXH36boDR
 /cvfLlaZPM/hA7l3wRUjWa17L8MNEon4+cqLkzDyTTihdHOdZA4P1O7ce/XffGQp
 BAiSta4EztB1xs0oTAOEmUJp1v8Ae7yRuFoZaCp+Dgq+0WOTbxDW4J57fTaphES1
 su3yoYjju+M/dUb/sWmOQNjeIchJPYWcpiOl9E8jQ/l2SaBJ6Oxmg7PxC3Ww0X2z
 JdF6mcKeaDH3WYO20FeC6xb9Q9FN2yX4rcW/Yg46TdeJ3T2sj8A19ZCHoeAQRl0I
 68SbAaDJw/K3fTBFPd9VyQQQawPbyhmpdQAOWtixNWBFIBbZpqI4o1DMJKJRoxqd
 Ail++ysLUICB0XXg0rGI+dFusjcu9AAeRODc11dtGa0YBh2Y28JrJ4OuV14GYQhe
 5J8BquRaDADA3iK/+3C6TUSQGhb5pFXTcsdNBC9zBPb/ePeMDfZxBcB2vCOnZDZ1
 m0kR5qnsz4IH8/rCmJ5wmMBh6JuyPoCSdiTVuuU5CuCVGYbmJuE=
 =NrV8
 -----END PGP SIGNATURE-----

Merge tag 'mips-pull-2019-04-12' of git://git.denx.de/u-boot-mips

- mt76xx: add USB support, small fixes
- ath79: small fixes, add support for QCA9563 SoC and AP152 reference board
- mscc: small fixes, add network support for JR2 and ServalT SoCs
- bmips: small fixes, enable more drivers for ARM specific BCM6858 and BCM63158 SoCs
- MIPS: fix redundant relocation of initrd images
2019-04-13 08:27:26 -04:00
Tom Rini
015289580f stm32 patches for v2019.07-rc1
- Add trusted boot with TF-A for stm32mp1
 - stm32mp1 dts files sync'ed with Linux version
 - add STM32MP1 Discovery boards (DK1 and DK2)
 - add STMFX gpio expander driver
 - misc improvement for stm3mp1 supports
 - rename stpmu1 to stpmic1 (official name)
 - stm32_qspi: move to exec_op (spi nor driver for stm32 mpu and mcu)
 - add STM32 FMC2 NAND flash controller driver
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJcsLHKAAoJEOKyvdngqpN1iwsH/3HtFxWsIcmT8TfHgIi2USKx
 /Rpj5Mdl0Q0584LAxZXkR2m9YvzBU6n2tR/n9wQfRyiazoEps1LXMmYcZVy35mQg
 AjTNV7xWfC1EZFP0+Gvn5PFquMPoZoIeqbDy1Jk91Qr4CHIqqS64DBwlTmQfjLzf
 6vfoyBcheL5Rf/AGM5AaHMjwh1GZs89cBCeVjGVMUAPgbfFUAKBWwi2fqdgEbDD7
 b9owLl2IykLTHOhvfnZi5NeRoA39deuNB0vSfU4WcMcONhekFCfOPi3Hch5aM/os
 xXlAXkTqps8rVfYHvUUmHm/wJhk+HH69wMThAWNFev/3g94MWR5zen5rjIOBVGg=
 =9M63
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20190412' of https://github.com/patrickdelaunay/u-boot

stm32 patches for v2019.07-rc1
- Add trusted boot with TF-A for stm32mp1
- stm32mp1 dts files sync'ed with Linux version
- add STM32MP1 Discovery boards (DK1 and DK2)
- add STMFX gpio expander driver
- misc improvement for stm3mp1 supports
- rename stpmu1 to stpmic1 (official name)
- stm32_qspi: move to exec_op (spi nor driver for stm32 mpu and mcu)
- add STM32 FMC2 NAND flash controller driver
2019-04-12 15:43:19 -04:00
Tom Rini
dd758c6720 Merge branch 'master' of git://git.denx.de/u-boot-sunxi 2019-04-12 15:43:08 -04:00
Tom Rini
066cc7c6cf Merge git://git.denx.de/u-boot-marvell
- Misc dts files sync'ed with Linux version (Chris)
- Orion watchdog fix (Chris)
- kwbimage changed to also support Marvell bin_hdr binary (Chris)
- Add DM support to enable CONFIG_BLK for sata_mv (Stefan)
- Enable BLK on multiple platforms (Stefan)
- Misc minor fixes to AXP theadorable board (Stefan)
- Correct logic for DM_SCSI + unconverted drivers check (stefan)
- Misc changes to kirkwood to enable DM_USB here (Chris)
- Change ahci_mvebu to enable usage on A38x (Baruch)
- Update the kirkwood entry in git-mailrc (Baruch)
- Misc minor improvements (turris, documentation) (Baruch)
- Enhance sata_mv to support Kirkwood as well (Michael)
- Add wdt command (Michael)
- Add Marvell integrated CPUs (MSYS) support with DB-XC3-24G4XG
  board support (Chris)
2019-04-12 15:42:56 -04:00
Horatiu Vultur
6aa50ae22c board: mscc: jr2: Update MSCC Jaguar2 boards
In Jaguar2 SoC family there are 3 different pcb. Each of this needs
to configure the phys in different ways. Therefore implement the
function board_phy_config and based on pcb configure them accordingly.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-04-12 17:32:51 +02:00
Rosy Song
61290fb52c mips: add initial support for qca956x referenced board
QCA9563 is CPU used on AP152 board :

    Clock speed : 750 MHz ,
    Arch :  Mips 74Kc,
    Eth : SGMII interface,
    MIMO config : 3 * 3 450M,
    2 * USB 2.0,

Signed-off-by: Rosy Song <rosysong@rosinson.com>

Changes for v2:
   - coding style cleanup
   - remove ununsed flash chip in defconfig
   - enable automatic icache / dcache size in defconfig

Changes for v3:
   - add detailed information for qca956x in commit message

Changes for v4:
   - remove pre-configured network settings in ap152.h

Changes for v5:
   - coding style cleanup
2019-04-12 17:32:50 +02:00
Patrice Chotard
8b4afe8070 board: stm32mp1: Force pinctrl driver probe in board_init()
In order to insure that hog GPIOs are configured early during
the boot process, force all pinctrl driver probing in board_init().

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-12 16:09:13 +02:00
Patrice Chotard
395f12976c Board: stm32mp1: Add supply current boot information
For DK1/DK2 boards, check if power supply provides enough current
to allow the board to boot correctly.
ADC@0 channel 18 and 19 are connected to USB type-C CC1 and CC2
signals. The table below shows the behavior for different range of
CC1 or CC2:

  range       | power supply | red led |          console message
  (Volts)     |   (Amps)     | blinks  |
--------------|--------------|---------|-----------------------------------
[2.10 - 1.23[ |     3        |   NO    |    NO
[1.23 - 0.66[ |     1.5      | 3 times | WARNING 1.5A power supply detected
[0.66 - 0]    |     0.5      | 2 times | WARNING 500mA power supply detected

If detected current is < 3A, red led is kept ON after blinking.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-12 16:09:13 +02:00
Patrice Chotard
3911048457 board: stm32mp1: Update README file
Update README with DK1 and DK2 boards related informations

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-12 16:09:13 +02:00
Patrick Delaunay
db4ff0df65 stpmic1: update register names
Alignment with  STPMIC1 datasheet
  s/MAIN_CONTROL_REG/MAIN_CR/g
  s/MASK_RESET_BUCK/BUCKS_MRST_CR/g
  s/MASK_RESET_LDOS/LDOS_MRST_CR/g
  s/BUCKX_CTRL_REG/BUCKX_MAIN_CR/g
  s/VREF_CTRL_REG/REFDDR_MAIN_CR/g
  s/LDOX_CTRL_REG/LDOX_MAIN_CR/g
  s/USB_CTRL_REG/BST_SW_CR/g
  s/STPMIC1_NVM_USER_STATUS_REG/STPMIC1_NVM_SR/g
  s/STPMIC1_NVM_USER_CONTROL_REG/STPMIC1_NVM_CR/g
and update all the associated defines.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-12 16:09:13 +02:00
Patrick Delaunay
42f01aacfd power: rename stpmu1 to official name stpmic1
Alignment with kernel driver name & binding
introduced by https://patchwork.kernel.org/cover/10761943/
to use the final marketing name = STPMIC1.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-04-12 16:09:13 +02:00
Patrick Delaunay
d46c22b3fd power: stpmu1: rename files to stpmic1
Prepare file modification for kernel alignment and
rename driver to stpmic1.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-04-12 16:09:13 +02:00
Patrick Delaunay
45459747ca stm32mp1: add syscfg initialization
Initialize the system configuration for basic boot
- update interconnect setting
- disable pull-down for boot pin
- enable High Speed Low Voltage Pad mode for SPI, SDMMC, ETH, QSPI
- activate I/O compensation

Done by SSBL = TF-A for trusted boot

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-12 16:09:13 +02:00
Patrick Delaunay
9a2ba2838b stm32mp1: support forced boot mode
The boot mode can be forced by key press
or by TAMP register, requested in kernel by syscon-reboot-mode

tamp: tamp@5c00a000 {
	compatible = "simple-bus", "syscon", "simple-mfd";
	reg = <0x5c00a000 0x400>;

	reboot-mode {
		compatible = "syscon-reboot-mode";
		offset = <0x150>; /* reg20 */
		mask = <0xff>;
		mode-normal = <0>;
		mode-fastboot = <0x1>;
		mode-recovery = <0x2>;
		mode-stm32cubeprogrammer = <0x3>;
		mode-ums_mmc0 = <0x10>;
		mode-ums_mmc1 = <0x11>;
		mode-ums_mmc2 = <0x12>;
	};
};

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-12 16:09:13 +02:00
Patrick Delaunay
842ebb5f40 stm32mp1: update bootcmd
Clearly separate bootcmd for stm32mp1 board
(bootcmd_stm32mp) and preboot management.
That solve issue for fastboot continue command.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-12 16:09:13 +02:00
Patrick Delaunay
b4ae34b66b stm32mp1: add runtime information in environment
Set board name with the first dts compatible found in DT
code under CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG

The result with DEVICE_TREE=stm32mp157c-ev1 is:
    STM32MP> env print
    	board=stm32mp1
    	board_name=stm32mp157c-ev1

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-12 16:09:13 +02:00
Patrick Delaunay
d461f10036 stm32mp1: display board information
Implement checkboard() function to display
- the boot chain used: basic or trusted
- the board compatible in device tree
- the board identifier and revision, saved in OTP59 for ST boards

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-12 16:09:13 +02:00
Patrick Delaunay
abf2678f0f stm32mp1: add trusted boot with TF-A
Add support of trusted boot, using TF-A as first stage bootloader,
The boot sequence is
  BootRom >=> TF-A.stm32 (clock & DDR) >=> U-Boot.stm32

The TF-A monitor provides secure monitor with support of SMC
- proprietary to manage secure devices (BSEC for example)
- PSCI for power

The same device tree is used for STMicroelectronics boards with
basic boot and with trusted boot.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-12 16:09:13 +02:00
Jagan Teki
59aea29a31 MAINTAINERS: Change Jagan's email address
Missed few mails from openedev, since most of the day I look at
amarulasolutions mail so update the same.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-12 18:47:16 +05:30
Adam Ford
86034a959a ARM: am3517_evm: Add spl_start_uboot for Falcon Mode
When booting the am3517-evm, the following message appears:
SPL: Please implement spl_start_uboot() for your board
SPL: Direct Linux boot not active!

This patch implements spl_start_uboot to clear this message
and allow device to know if it should boot U-Boot or kernel.

Fixes: 1c6b6f383a ("ARM: am3517_evm: Enable Falcon Mode")

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-04-12 08:05:56 -04:00
Faiz Abbas
55f8b70fee board: ti: am335x: Remove non DM_ETH code
With DM_ETH enabled in am335x devices, remove all the unused
non-DM code.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-04-12 08:05:55 -04:00
Faiz Abbas
0229c9330d board: ti: am335x: Add platdata for cpsw in SPL
The SPL image overflows when cpsw dt nodes are added and SPL_OF_CONTROL
is enabled. Use static platdata instead to save space.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-04-12 08:05:54 -04:00
Lokesh Vutla
5582c03565 board: ti: am65x: Enable fixing up msmc sram node
Create a ft_board_setup() api that gets called as part of
DT fixup before jumping to kernel. In this ft_board_setup()
call fdt_fixup_msmc_ram that update msmc sram node.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-04-12 08:05:51 -04:00
Franklin S Cooper Jr
b3b2a9ea3e arm: dra7: Allow NAND to be enabled on DRA71x EVM.
If SW 8 pins 0 and 1 indicate that NAND should be enabled then
the pins pinmux must be reconfigured for NAND mode.

Therefore, enable NAND by reconfiguring the pinmux.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-04-12 08:05:49 -04:00
Franklin S Cooper Jr
f072aff944 board: ti: dra71: Add pinmux settings for NAND on DRA71x EVM
By default VOUT3 occupies the pins required for NAND. Therefore, create
a seperate entry that can be use to reconfigure these pins to work for
NAND.

On the EVM SWITCH 8 pins 0 and 1 will be used to determine if NAND is
enabled or not. For NAND to be selected pin 0 should be on and pin 1
should be off. Any other combination will assume NAND shouldn't be
enabled.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-04-12 08:05:49 -04:00
Adam Ford
f7c1d53605 ARM: davinci: da850evm: Enable SPL_OF_CONTROL without PLATDATA
With the memory mapping giving us some more avialable RAM, this
updates the da850-evm-u-boot.dtsi to include the serial port, SPI
and Flash nodes along with some dependent nodes in the SPL dtb.
This also removes the platform data initialization code for the
serial port and SPI Flash.

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-04-12 08:05:49 -04:00
Adam Ford
15b8c75058 davinci: da850evm/omapl138-lcdk: Move BSS to SDRAM because SRAM is full
In order to fully support SPL_OF_CONTROL, we need BSS to be a bit
larger. This patch relocates BSS to SDRAM instead of SRAM which
is similar to how ARMv7 boards (like OMAP2+) do it.

This means two new variables are required:
CONFIG_SPL_BSS_START_ADDR  set to DAVINCI_DDR_EMIF_DATA_BASE
CONFIG_SPL_BSS_MAX_SIZE is set to 0x1080000 which is 1 byte
before the location where U-Boot will load.

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-04-12 08:05:49 -04:00
Sjoerd Simons
4512380420 am335x, guardian: Add support for the bosch guardian board
Add support for the Bosch Guardian board.

CPU  : AM335X-GP rev 2.1
Model: Bosch AM335x Guardian
I2C:   ready
DRAM:  256 MiB
NAND:  512 MiB
MMC:   OMAP SD/MMC: 0

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Felix Brack <fb@ltec.ch>
2019-04-12 08:05:48 -04:00
Murali Karicheri
f748ec9d32 ARM: k2g: add a workaround to reset the phy
This patch adds a workaround to reset the phy one time during boot
using GPIO0 pin 10 to make sure, the Phy latches the configuration
from the input pins correctly.

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-04-12 08:05:46 -04:00
Murali Karicheri
b15311c90b ARM: k2g-gp-evm: update to rgmii pinmux configuration
This patch updates pinmux configuration for K2G GP EVM based on
data generated by the pinmux tool at
https://dev.ti.com/pinmux/app.html#/default

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-04-12 08:05:46 -04:00
Murali Karicheri
c7206e9789 ARM: k2g-ice: Add pinmux support for rgmii interface
This add pinmux configuration for rgmii interface so that network
driver can be supported on K2G ICE boards. The pinmux configurations
for this are generated using the pinmux tool at
https://dev.ti.com/pinmux/app.html#/default

As this required some BUFFER_CLASS definitions, same is re-used
from the linux defnitions in include/dt-bindings/pinctrl/keystone.h

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-04-12 08:05:45 -04:00
Chris Packham
4db944ab44 arm: mvebu: Add DB-XC3-24G4XG board
The DB-XC3-24G4XG is a switch development board from Marvell. It can
either use and external CPU card such as the db-88f6820-amc or the
internal CPU that is integrated into the switch.

Add support for running U-Boot on the internal CPU and enable the USB,
SPI and NAND peripherals. For now this needs the bin_hdr from the
Marvell U-Boot for this board.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2019-04-12 07:04:18 +02:00
Stefan Roese
0a590243d1 arm: mvebu: AXP: Enhance PCIe port capability configuration
This patch enables the PCIe port specific link capabilities configuration
for Armada XP. The weak function board_sat_r_get() was used to return
a common flag for PCIe Gen1 vs Gen2 capability for all PCIe ports. This
is now changed with this patch to return a bit per PCIe port (4 bits
in this case, bit 0 for PCIe port 0, etc).

The theadorable board uses this new feature to configure PCIe port 0
as Gen1 and all other PCIe ports as Gen2 capable. All other AXP boards
using this function are not changed in the configuration and still
configure all ports as PCIe Gen2.

This patch also removes the parameter "pex_mode" from
board_serdes_cfg_get() as this parameter was not used in any of the
implementations.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Phil Sutter <phil@nwl.cc>
2019-04-12 07:04:18 +02:00
Baruch Siach
3ff0ad2e48 arm: mvebu: clearfog: document eMMC installation
Document build and install of U-Boot image on Clearfog with eMMC.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2019-04-12 07:04:18 +02:00
Stefan Roese
54055ff7a6 arm: mvebu: theadorable: Add test for ctrl-c in PCIe PEX switch test
The check for the missing PEX switch can lead to an infinite loop, when
the PCIe device is not found. It is helpful to enable the user to break
out of this boot-loop, to enable booting to the prompt for test cases.
This patch adds a 3 second delay in the error case before rebooting.
The user can press Ctrl-C in this time to abort the boot-loop.

This patch also calls bootcount_inc() before rebooting in the error
case. This is needed to increment the bootcounter, since this function
is called earlier than the main bootcounter increment. Otherwise the
bootcounter will not be incremented in the error case at all.

Signed-off-by: Stefan Roese <sr@denx.de>
2019-04-12 07:04:18 +02:00
Chris Packham
7ceefcbaca arm: mvebu: x530: Enable watchdog in SPL and U-Boot
Enable the hardware watchdog to guard against system lock ups when
running in the SPL or U-Boot. Stop the watchdog just before booting so
that the OS can re-enable it if needed.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2019-04-12 07:04:18 +02:00
Chris Packham
8e427ba351 watchdog: orion_wdt: take timeout value in ms
The generic wdt_start API expects to be called with the timeout in
milliseconds. Update the orion_wdt driver to accept a timeout in
milliseconds and use the clock rate specified in the dts to convert the
timeout to an appropriate value for the timer reload register.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2019-04-12 07:04:18 +02:00
Tom Rini
f95fdf237d Merge branch 'master' of git://git.denx.de/u-boot-sh
- Various rmobile fixes
2019-04-11 14:29:22 -04:00
Neil Armstrong
4a327e8329 boards: Amlogic: Add support for Libretech-AC
LibreTech AC is a single board computer manufactured by Libre Technology
with the following specifications:

 - Amlogic S805X ARM Cortex-A53 quad-core SoC @ 1.2GHz
 - ARM Mali 450 GPU
 - 512MiB DDR4 SDRAM
 - 10/100 Ethernet
 - HDMI 2.0 4K/60Hz display
 - 40-pin GPIO header
 - 4 x USB 2.0 Host
 - eMMC, SPI NOR Flash
 - Infrared receiver

The u-boot specific code is the same as the P212 support,
so use the P212 board support code with a distinct defconfig
and config include files.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-04-10 16:50:46 +02:00
Mohammad Rasim
ead6b40695 ARM: board: meson: add p201 board
This adds support for p201 reference boards

Signed-off-by: Mohammad Rasim <mohammad.rasim96@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-04-10 16:48:31 +02:00
Mohammad Rasim
edee72b8bc ARM: board: meson: add p200 board
This adds the defconfig and README files for p200 board

Signed-off-by: Mohammad Rasim <mohammad.rasim96@gmail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-04-10 16:48:31 +02:00
Mohammad Rasim
4778afcbe7 ARM: board: meson: rename odroid-c2 to p200
This renames the odroid-c2 to p200 and set it as the default GXBB board
Other boards (odroid-c2 and nanopi-k2) will inherit from p200

Signed-off-by: Mohammad Rasim <mohammad.rasim96@gmail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-04-10 16:48:31 +02:00
Jagan Teki
1692c73ccb sun50i: a64: Add Oceanic 5205 5inMFD initial support
Oceanic 5205 5inMFD is a 5 inch Multi function display baseboard
designed to mount SoPine SOM.

Key features:
- Allwinner A64 Cortex-A53
- Mali-400MP2 GPU
- AXP803 PMIC
- 2GB DDR3 RAM
- SD Slot
- SPI-NOR flash
- EMAC, RTL8211E
- MCP2515 CAN
- 4-lane, MIPI-DSI panel
- Goodix 911 CTP
- USB Host
- 12V DC power supply

Linux commit details about the sun50i-a64-oceanic-5205-5inmfd.dts sync:
"arm64: allwinner: a64: Add Oceanic 5205 5inMFD initial support"
(sha1: 00f7980a3bd53d12abc34f68146a8eed0e894248)

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-10 15:25:38 +05:30
Eugeniu Rosca
c8630bb096 ARM: rmobile: rcar-common: Zap arch_preboot_os()
v2018.01 commit e23eb942ad ("ARM: rmobile: Stop using
rcar-common/common.c on Gen3") removed
board/renesas/rcar-common/common.c from the build chain with the
reasoning that calling arch_preboot_os() is no longer needed.

However, it left the arch_preboot_os() in place. Get rid of it.
This is done in preparation of resurrecting rcar-common/common.c.

NOTE: The three removed header includes (io.h, sys_proto.h, rcar-mstp.h)
are in direct relationship with the dropped arch_preboot_os() hook. The
other headers (common.h, rmobile.h) are going to be needed by pretty
much anything that is going to appear in the rcar common code. So, keep
the two in place.

Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
2019-04-09 19:20:38 +02:00
Marek Vasut
c4ea43d12f ARM: rmobile: Add R8A77965 M3NULCB support
Add defconfig and board specific adjustments for the R8A77965 M3N ULCB.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-04-09 18:19:10 +02:00
Tom Rini
5a451f11c8 First set of u-boot-atmel features and fixes for 2019.07 cycle
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJcrEcDAAoJEB6zHgIOrC/I1dgH/3mHQNW8bqiNCJYcoVQdheHb
 e06TqbWHNlOG/NilYybvdeF+LjeCqhX4PzyL/sdcyBf3D/tK4cVvHpZrQyjb2s6K
 5IZSKJ+cZznmq6Hv7b//d30Azhx8bi8luxs60kkj+PF0xI1EyU3JteUqAs4Ooxd7
 z+HdcRFuAaps6sy0+szB3fTw9HTGrhFvQuHasDGb2uahhpwGzu/P0RchIDksOdzH
 3L4EOvgq8MZCiZ3ZtFWMWzQoCjcKf5Fuux41qar8gG/LrkWRfKG+LfWfZtTiTsjf
 vC9bYWmdKtkSLFj1PWgLBfGxev5zwPUbqI2EP4OlagfNs3os5pVFCYV5NZ6ovdE=
 =kMXf
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-atmel-2019.07-a' of git://git.denx.de/u-boot-atmel

First set of u-boot-atmel features and fixes for 2019.07 cycle
2019-04-09 12:10:40 -04:00
Stefan Roese
a71e2f933b arm: at91: Add gardena-gateway-at91sam support
The GARDENA smart Gateway boards are equipped with an Atmel / Microchip
AT91SAM9G25 SoC and with 128 MiB of RAM and 256 MiB of NAND storage.
This patch adds support for this board including SPL support. Therefore
the AT91Boostrap is not needed on this platform any more.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Cc: Andreas Bießmann <andreas@biessmann.org>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2019-04-09 09:28:50 +03:00
Ilko Iliev
d9bd42900c board: pm9g45: Migrate to CONFIG_DM
Migrate the following options to CONFIG_DM:
  CONFIG_DM_GPIO
  CONFIG_DM_MMC
  CONFIG_DM_ETH
  CONFIG_DM_SERIAL
  CONFIG_DM_USB

Signed-off-by: Ilko Iliev <iliev@ronetix.at>
2019-04-09 09:28:50 +03:00
Tom Rini
ffb269ab30 Merge git://git.denx.de/u-boot-riscv
- RISC-V arch support SMP.
- Support Andestech's PLIC and PLMT.
- qemu, fu54e, ae350 boards enable SMP by default.
- Fix CONFIG_DEFAULT_DEVICE_TREE failure.
2019-04-08 22:32:11 -04:00
Stefan Roese
ccd063e981 watchdog: Move watchdog_dev to data section (BSS may not be cleared)
This patch moves all instances of static "watchdog_dev" declarations to
the "data" section. This may be needed, as the BSS may not be cleared
in the early U-Boot phase, where watchdog_reset() is already beeing
called. This may result in incorrect pointer access, as the check to
"!watchdog_dev" in watchdog_reset() may not be true and the function
may continue to run.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Cc: Tom Rini <trini@konsulko.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: "Marek Behún" <marek.behun@nic.cz>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Tested-by: Michal Simek <michal.simek@xilinx.com> (on zcu100)
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
2019-04-08 09:21:39 -04:00
Rick Chen
076b845893 riscv: ae350: enable SMP
Signed-off-by: Rick Chen <rick@andestech.com>
Cc: Greentime Hu <greentime@andestech.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
2019-04-08 09:45:08 +08:00
Lukas Auer
d0a8fd3e4d riscv: qemu: enable SMP
Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-04-08 09:44:26 +08:00