mirror of
https://github.com/AsahiLinux/u-boot
synced 2025-02-17 22:49:02 +00:00
Merge branch '2019-05-03-master-imports'
- Various btrfs fixes - Various TI platform fixes - Other fixes (cross build, taurus update, Kconfig help text)
This commit is contained in:
Tom Rini
commit
b362fe0848
28 changed files with 685 additions and 345 deletions
|
|
@ -587,7 +587,7 @@ S: Maintained
|
|||
F: arch/mips/mach-jz47xx/
|
||||
|
||||
MMC
|
||||
M: Jaehoon Chung <jh80.chung@samsung.com>
|
||||
M: Peng Fan <peng.fan@nxp.com>
|
||||
S: Maintained
|
||||
T: git git://git.denx.de/u-boot-mmc.git
|
||||
F: drivers/mmc/
|
||||
|
|
|
|||
|
|
@ -256,6 +256,7 @@ dtb-$(CONFIG_AM33XX) += \
|
|||
am335x-evmsk.dtb \
|
||||
am335x-bonegreen.dtb \
|
||||
am335x-icev2.dtb \
|
||||
am335x-pocketbeagle.dtb \
|
||||
am335x-pxm50.dtb \
|
||||
am335x-rut.dtb \
|
||||
am335x-shc.dtb \
|
||||
|
|
|
|||
124
arch/arm/dts/am335x-osd335x-common.dtsi
Normal file
124
arch/arm/dts/am335x-osd335x-common.dtsi
Normal file
|
|
@ -0,0 +1,124 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
|
||||
*
|
||||
* Author: Robert Nelson <robertcnelson@gmail.com>
|
||||
*/
|
||||
|
||||
/ {
|
||||
cpus {
|
||||
cpu@0 {
|
||||
cpu0-supply = <&dcdc2_reg>;
|
||||
};
|
||||
};
|
||||
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x20000000>; /* 512 MB */
|
||||
};
|
||||
};
|
||||
|
||||
&cpu0_opp_table {
|
||||
/*
|
||||
* Octavo Systems:
|
||||
* The EFUSE_SMA register is not programmed for any of the AM335x wafers
|
||||
* we get and we are not programming them during our production test.
|
||||
* Therefore, from a DEVICE_ID revision point of view, the silicon looks
|
||||
* like it is Revision 2.1. However, from an EFUSE_SMA point of view for
|
||||
* the HW OPP table, the silicon looks like it is Revision 1.0 (ie the
|
||||
* EFUSE_SMA register reads as all zeros).
|
||||
*/
|
||||
oppnitro-1000000000 {
|
||||
opp-supported-hw = <0x06 0x0100>;
|
||||
};
|
||||
};
|
||||
|
||||
&am33xx_pinmux {
|
||||
i2c0_pins: pinmux-i2c0-pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* (C17) I2C0_SDA.I2C0_SDA */
|
||||
AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* (C16) I2C0_SCL.I2C0_SCL */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0_pins>;
|
||||
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
|
||||
tps: tps@24 {
|
||||
reg = <0x24>;
|
||||
};
|
||||
};
|
||||
|
||||
/include/ "tps65217.dtsi"
|
||||
|
||||
&tps {
|
||||
interrupts = <7>; /* NMI */
|
||||
interrupt-parent = <&intc>;
|
||||
|
||||
ti,pmic-shutdown-controller;
|
||||
|
||||
pwrbutton {
|
||||
interrupts = <2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
regulators {
|
||||
dcdc1_reg: regulator@0 {
|
||||
regulator-name = "vdds_dpr";
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
dcdc2_reg: regulator@1 {
|
||||
/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
|
||||
regulator-name = "vdd_mpu";
|
||||
regulator-min-microvolt = <925000>;
|
||||
regulator-max-microvolt = <1351500>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
dcdc3_reg: regulator@2 {
|
||||
/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
|
||||
regulator-name = "vdd_core";
|
||||
regulator-min-microvolt = <925000>;
|
||||
regulator-max-microvolt = <1150000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo1_reg: regulator@3 {
|
||||
regulator-name = "vio,vrtc,vdds";
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo2_reg: regulator@4 {
|
||||
regulator-name = "vdd_3v3aux";
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo3_reg: regulator@5 {
|
||||
regulator-name = "vdd_1v8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo4_reg: regulator@6 {
|
||||
regulator-name = "vdd_3v3a";
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&aes {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sham {
|
||||
status = "okay";
|
||||
};
|
||||
237
arch/arm/dts/am335x-pocketbeagle.dts
Normal file
237
arch/arm/dts/am335x-pocketbeagle.dts
Normal file
|
|
@ -0,0 +1,237 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
|
||||
*
|
||||
* Author: Robert Nelson <robertcnelson@gmail.com>
|
||||
*/
|
||||
/dts-v1/;
|
||||
|
||||
#include "am33xx.dtsi"
|
||||
#include "am335x-osd335x-common.dtsi"
|
||||
|
||||
/ {
|
||||
model = "TI AM335x PocketBeagle";
|
||||
compatible = "ti,am335x-pocketbeagle", "ti,am335x-bone", "ti,am33xx";
|
||||
|
||||
chosen {
|
||||
stdout-path = &uart0;
|
||||
};
|
||||
|
||||
leds {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usr_leds_pins>;
|
||||
|
||||
compatible = "gpio-leds";
|
||||
|
||||
usr0 {
|
||||
label = "beaglebone:green:usr0";
|
||||
gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
usr1 {
|
||||
label = "beaglebone:green:usr1";
|
||||
gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "mmc0";
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
usr2 {
|
||||
label = "beaglebone:green:usr2";
|
||||
gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "cpu0";
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
usr3 {
|
||||
label = "beaglebone:green:usr3";
|
||||
gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
|
||||
vmmcsd_fixed: fixedregulator0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vmmcsd_fixed";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
&am33xx_pinmux {
|
||||
i2c2_pins: pinmux-i2c2-pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3) /* (D17) uart1_rtsn.I2C2_SCL */
|
||||
AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3) /* (D18) uart1_ctsn.I2C2_SDA */
|
||||
>;
|
||||
};
|
||||
|
||||
ehrpwm0_pins: pinmux-ehrpwm0-pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* (A13) mcasp0_aclkx.ehrpwm0A */
|
||||
>;
|
||||
};
|
||||
|
||||
ehrpwm1_pins: pinmux-ehrpwm1-pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* (U14) gpmc_a2.ehrpwm1A */
|
||||
>;
|
||||
};
|
||||
|
||||
mmc0_pins: pinmux-mmc0-pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* (C15) spi0_cs1.gpio0[6] */
|
||||
AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* (G16) mmc0_dat0.mmc0_dat0 */
|
||||
AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* (G15) mmc0_dat1.mmc0_dat1 */
|
||||
AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* (F18) mmc0_dat2.mmc0_dat2 */
|
||||
AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* (F17) mmc0_dat3.mmc0_dat3 */
|
||||
AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* (G18) mmc0_cmd.mmc0_cmd */
|
||||
AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* (G17) mmc0_clk.mmc0_clk */
|
||||
AM33XX_IOPAD(0x9a0, PIN_INPUT | MUX_MODE4) /* (B12) mcasp0_aclkr.mmc0_sdwp */
|
||||
>;
|
||||
};
|
||||
|
||||
spi0_pins: pinmux-spi0-pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* (A17) spi0_sclk.spi0_sclk */
|
||||
AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* (B17) spi0_d0.spi0_d0 */
|
||||
AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* (B16) spi0_d1.spi0_d1 */
|
||||
AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0) /* (A16) spi0_cs0.spi0_cs0 */
|
||||
>;
|
||||
};
|
||||
|
||||
spi1_pins: pinmux-spi1-pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x964, PIN_INPUT_PULLUP | MUX_MODE4) /* (C18) eCAP0_in_PWM0_out.spi1_sclk */
|
||||
AM33XX_IOPAD(0x968, PIN_INPUT_PULLUP | MUX_MODE4) /* (E18) uart0_ctsn.spi1_d0 */
|
||||
AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE4) /* (E17) uart0_rtsn.spi1_d1 */
|
||||
AM33XX_IOPAD(0x9b0, PIN_INPUT_PULLUP | MUX_MODE4) /* (A15) xdma_event_intr0.spi1_cs1 */
|
||||
>;
|
||||
};
|
||||
|
||||
usr_leds_pins: pinmux-usr-leds-pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7) /* (V15) gpmc_a5.gpio1[21] - USR_LED_0 */
|
||||
AM33XX_IOPAD(0x858, PIN_OUTPUT | MUX_MODE7) /* (U15) gpmc_a6.gpio1[22] - USR_LED_1 */
|
||||
AM33XX_IOPAD(0x85c, PIN_OUTPUT | MUX_MODE7) /* (T15) gpmc_a7.gpio1[23] - USR_LED_2 */
|
||||
AM33XX_IOPAD(0x860, PIN_OUTPUT | MUX_MODE7) /* (V16) gpmc_a8.gpio1[24] - USR_LED_3 */
|
||||
>;
|
||||
};
|
||||
|
||||
uart0_pins: pinmux-uart0-pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* (E15) uart0_rxd.uart0_rxd */
|
||||
AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* (E16) uart0_txd.uart0_txd */
|
||||
>;
|
||||
};
|
||||
|
||||
uart4_pins: pinmux-uart4-pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6) /* (T17) gpmc_wait0.uart4_rxd */
|
||||
AM33XX_IOPAD(0x874, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* (U17) gpmc_wpn.uart4_txd */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&epwmss0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ehrpwm0 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ehrpwm0_pins>;
|
||||
};
|
||||
|
||||
&epwmss1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ehrpwm1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ehrpwm1_pins>;
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
eeprom: eeprom@50 {
|
||||
compatible = "atmel,24c256";
|
||||
reg = <0x50>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c2_pins>;
|
||||
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
};
|
||||
|
||||
&mmc1 {
|
||||
status = "okay";
|
||||
vmmc-supply = <&vmmcsd_fixed>;
|
||||
bus-width = <4>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc0_pins>;
|
||||
cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
&rtc {
|
||||
system-power-controller;
|
||||
};
|
||||
|
||||
&tscadc {
|
||||
status = "okay";
|
||||
adc {
|
||||
ti,adc-channels = <0 1 2 3 4 5 6 7>;
|
||||
ti,chan-step-avg = <16 16 16 16 16 16 16 16>;
|
||||
ti,chan-step-opendelay = <0x98 0x98 0x98 0x98 0x98 0x98 0x98 0x98>;
|
||||
ti,chan-step-sampledelay = <0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_pins>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart4 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart4_pins>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_ctrl_mod {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb0_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb0 {
|
||||
status = "okay";
|
||||
dr_mode = "otg";
|
||||
};
|
||||
|
||||
&usb1_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
status = "okay";
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
&cppi41dma {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -15,7 +15,7 @@
|
|||
|
||||
/ {
|
||||
model = "Siemens taurus";
|
||||
compatible = "atmel,at91sam9g20ek", "atmel,at91sam9g20", "atmel,at91sam9";
|
||||
compatible = "atmel,at91sam9g20", "atmel,at91sam9";
|
||||
|
||||
chosen {
|
||||
u-boot,dm-pre-reloc;
|
||||
|
|
@ -35,88 +35,86 @@
|
|||
clock-frequency = <18432000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ahb {
|
||||
apb {
|
||||
pinctrl@fffff400 {
|
||||
board {
|
||||
pinctrl_pck0_as_mck: pck0_as_mck {
|
||||
atmel,pins =
|
||||
<AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC1 periph B */
|
||||
};
|
||||
&dbgu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
};
|
||||
};
|
||||
&gpbr {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
dbgu: serial@fffff200 {
|
||||
u-boot,dm-pre-reloc;
|
||||
status = "okay";
|
||||
};
|
||||
&macb0 {
|
||||
phy-mode = "rmii";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usart0: serial@fffb0000 {
|
||||
pinctrl-0 =
|
||||
<&pinctrl_usart0
|
||||
&pinctrl_usart0_rts
|
||||
&pinctrl_usart0_cts
|
||||
&pinctrl_usart0_dtr_dsr
|
||||
&pinctrl_usart0_dcd
|
||||
&pinctrl_usart0_ri>;
|
||||
status = "okay";
|
||||
};
|
||||
&nand0 {
|
||||
nand-bus-width = <8>;
|
||||
nand-ecc-mode = "soft";
|
||||
nand-on-flash-bbt;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usart1: serial@fffb4000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
macb0: ethernet@fffc4000 {
|
||||
phy-mode = "rmii";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb1: gadget@fffa4000 {
|
||||
atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ssc0: ssc@fffbc000 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&pinctrl_ssc0_tx>;
|
||||
};
|
||||
|
||||
spi0: spi@fffc8000 {
|
||||
cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
|
||||
mtd_dataflash@0 {
|
||||
compatible = "atmel,at45", "atmel,dataflash";
|
||||
spi-max-frequency = <50000000>;
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
rtc@fffffd20 {
|
||||
atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
watchdog@fffffd40 {
|
||||
timeout-sec = <15>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
gpbr: syscon@fffffd50 {
|
||||
status = "okay";
|
||||
};
|
||||
&pinctrl {
|
||||
u-boot,dm-pre-reloc;
|
||||
board {
|
||||
pinctrl_pck0_as_mck: pck0_as_mck {
|
||||
atmel,pins =
|
||||
/* PC1 periph B */
|
||||
<AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
|
||||
};
|
||||
|
||||
nand0: nand@40000000 {
|
||||
nand-bus-width = <8>;
|
||||
nand-ecc-mode = "soft";
|
||||
nand-on-flash-bbt;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb0: ohci@00500000 {
|
||||
num-ports = <2>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&rtc {
|
||||
atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
|
||||
mtd_dataflash@0 {
|
||||
compatible = "atmel,at45", "atmel,dataflash";
|
||||
spi-max-frequency = <50000000>;
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&ssc0 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&pinctrl_ssc0_tx>;
|
||||
};
|
||||
|
||||
&usart0 {
|
||||
pinctrl-0 =
|
||||
<&pinctrl_usart0
|
||||
&pinctrl_usart0_rts
|
||||
&pinctrl_usart0_cts
|
||||
&pinctrl_usart0_dtr_dsr
|
||||
&pinctrl_usart0_dcd
|
||||
&pinctrl_usart0_ri>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usart1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb0 {
|
||||
num-ports = <2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&watchdog {
|
||||
u-boot,dm-pre-reloc;
|
||||
timeout-sec = <15>;
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@
|
|||
* Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
|
||||
*/
|
||||
|
||||
#include <dt-bindings/pinctrl/k3-am65.h>
|
||||
#include <dt-bindings/pinctrl/k3.h>
|
||||
#include <dt-bindings/dma/k3-udma.h>
|
||||
|
||||
/ {
|
||||
|
|
@ -144,41 +144,41 @@
|
|||
u-boot,dm-spl;
|
||||
main_uart0_pins_default: main_uart0_pins_default {
|
||||
pinctrl-single,pins = <
|
||||
AM65X_IOPAD(0x01e4, PIN_INPUT | MUX_MODE0) /* (AF11) UART0_RXD */
|
||||
AM65X_IOPAD(0x01e8, PIN_OUTPUT | MUX_MODE0) /* (AE11) UART0_TXD */
|
||||
AM65X_IOPAD(0x01ec, PIN_INPUT | MUX_MODE0) /* (AG11) UART0_CTSn */
|
||||
AM65X_IOPAD(0x01f0, PIN_OUTPUT | MUX_MODE0) /* (AD11) UART0_RTSn */
|
||||
AM65X_IOPAD(0x01e4, PIN_INPUT, 0) /* (AF11) UART0_RXD */
|
||||
AM65X_IOPAD(0x01e8, PIN_OUTPUT, 0) /* (AE11) UART0_TXD */
|
||||
AM65X_IOPAD(0x01ec, PIN_INPUT, 0) /* (AG11) UART0_CTSn */
|
||||
AM65X_IOPAD(0x01f0, PIN_OUTPUT, 0) /* (AD11) UART0_RTSn */
|
||||
>;
|
||||
u-boot,dm-spl;
|
||||
};
|
||||
|
||||
main_mmc0_pins_default: main_mmc0_pins_default {
|
||||
pinctrl-single,pins = <
|
||||
AM65X_IOPAD(0x01a8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* (B25) MMC0_CLK */
|
||||
AM65X_IOPAD(0x01aC, PIN_INPUT_PULLUP | MUX_MODE0) /* (B27) MMC0_CMD */
|
||||
AM65X_IOPAD(0x01a4, PIN_INPUT_PULLUP | MUX_MODE0) /* (A26) MMC0_DAT0 */
|
||||
AM65X_IOPAD(0x01a0, PIN_INPUT_PULLUP | MUX_MODE0) /* (E25) MMC0_DAT1 */
|
||||
AM65X_IOPAD(0x019c, PIN_INPUT_PULLUP | MUX_MODE0) /* (C26) MMC0_DAT2 */
|
||||
AM65X_IOPAD(0x0198, PIN_INPUT_PULLUP | MUX_MODE0) /* (A25) MMC0_DAT3 */
|
||||
AM65X_IOPAD(0x0194, PIN_INPUT_PULLUP | MUX_MODE0) /* (E24) MMC0_DAT4 */
|
||||
AM65X_IOPAD(0x0190, PIN_INPUT_PULLUP | MUX_MODE0) /* (A24) MMC0_DAT5 */
|
||||
AM65X_IOPAD(0x018c, PIN_INPUT_PULLUP | MUX_MODE0) /* (B26) MMC0_DAT6 */
|
||||
AM65X_IOPAD(0x0188, PIN_INPUT_PULLUP | MUX_MODE0) /* (D25) MMC0_DAT7 */
|
||||
AM65X_IOPAD(0x01b0, PIN_INPUT | MUX_MODE0) /* (C25) MMC0_DS */
|
||||
AM65X_IOPAD(0x01a8, PIN_INPUT_PULLDOWN, 0) /* (B25) MMC0_CLK */
|
||||
AM65X_IOPAD(0x01aC, PIN_INPUT_PULLUP, 0) /* (B27) MMC0_CMD */
|
||||
AM65X_IOPAD(0x01a4, PIN_INPUT_PULLUP, 0) /* (A26) MMC0_DAT0 */
|
||||
AM65X_IOPAD(0x01a0, PIN_INPUT_PULLUP, 0) /* (E25) MMC0_DAT1 */
|
||||
AM65X_IOPAD(0x019c, PIN_INPUT_PULLUP, 0) /* (C26) MMC0_DAT2 */
|
||||
AM65X_IOPAD(0x0198, PIN_INPUT_PULLUP, 0) /* (A25) MMC0_DAT3 */
|
||||
AM65X_IOPAD(0x0194, PIN_INPUT_PULLUP, 0) /* (E24) MMC0_DAT4 */
|
||||
AM65X_IOPAD(0x0190, PIN_INPUT_PULLUP, 0) /* (A24) MMC0_DAT5 */
|
||||
AM65X_IOPAD(0x018c, PIN_INPUT_PULLUP, 0) /* (B26) MMC0_DAT6 */
|
||||
AM65X_IOPAD(0x0188, PIN_INPUT_PULLUP, 0) /* (D25) MMC0_DAT7 */
|
||||
AM65X_IOPAD(0x01b0, PIN_INPUT, 0) /* (C25) MMC0_DS */
|
||||
>;
|
||||
u-boot,dm-spl;
|
||||
};
|
||||
|
||||
main_mmc1_pins_default: main_mmc1_pins_default {
|
||||
pinctrl-single,pins = <
|
||||
AM65X_IOPAD(0x02d4, PIN_INPUT_PULLDOWN | MUX_MODE0) /* (C27) MMC1_CLK */
|
||||
AM65X_IOPAD(0x02d8, PIN_INPUT_PULLUP | MUX_MODE0) /* (C28) MMC1_CMD */
|
||||
AM65X_IOPAD(0x02d0, PIN_INPUT_PULLUP | MUX_MODE0) /* (D28) MMC1_DAT0 */
|
||||
AM65X_IOPAD(0x02cc, PIN_INPUT_PULLUP | MUX_MODE0) /* (E27) MMC1_DAT1 */
|
||||
AM65X_IOPAD(0x02c8, PIN_INPUT_PULLUP | MUX_MODE0) /* (D26) MMC1_DAT2 */
|
||||
AM65X_IOPAD(0x02c4, PIN_INPUT_PULLUP | MUX_MODE0) /* (D27) MMC1_DAT3 */
|
||||
AM65X_IOPAD(0x02dc, PIN_INPUT_PULLUP | MUX_MODE0) /* (B24) MMC1_SDCD */
|
||||
AM65X_IOPAD(0x02e0, PIN_INPUT | MUX_MODE0) /* (C24) MMC1_SDWP */
|
||||
AM65X_IOPAD(0x02d4, PIN_INPUT_PULLDOWN, 0) /* (C27) MMC1_CLK */
|
||||
AM65X_IOPAD(0x02d8, PIN_INPUT_PULLUP, 0) /* (C28) MMC1_CMD */
|
||||
AM65X_IOPAD(0x02d0, PIN_INPUT_PULLUP, 0) /* (D28) MMC1_DAT0 */
|
||||
AM65X_IOPAD(0x02cc, PIN_INPUT_PULLUP, 0) /* (E27) MMC1_DAT1 */
|
||||
AM65X_IOPAD(0x02c8, PIN_INPUT_PULLUP, 0) /* (D26) MMC1_DAT2 */
|
||||
AM65X_IOPAD(0x02c4, PIN_INPUT_PULLUP, 0) /* (D27) MMC1_DAT3 */
|
||||
AM65X_IOPAD(0x02dc, PIN_INPUT_PULLUP, 0) /* (B24) MMC1_SDCD */
|
||||
AM65X_IOPAD(0x02e0, PIN_INPUT, 0) /* (C24) MMC1_SDWP */
|
||||
>;
|
||||
u-boot,dm-spl;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -99,7 +99,7 @@
|
|||
};
|
||||
|
||||
&dmsc {
|
||||
mboxes= <&mcu_secproxy 7>, <&mcu_secproxy 6>, <&mcu_secproxy 5>;
|
||||
mboxes= <&mcu_secproxy 8>, <&mcu_secproxy 6>, <&mcu_secproxy 5>;
|
||||
mbox-names = "tx", "rx", "notify";
|
||||
ti,host-id = <4>;
|
||||
ti,secure-host;
|
||||
|
|
@ -116,17 +116,17 @@
|
|||
u-boot,dm-spl;
|
||||
wkup_uart0_pins_default: wkup_uart0_pins_default {
|
||||
pinctrl-single,pins = <
|
||||
AM65X_WKUP_IOPAD(0x00a0, PIN_INPUT | MUX_MODE0) /* (AB1) WKUP_UART0_RXD */
|
||||
AM65X_WKUP_IOPAD(0x00a4, PIN_OUTPUT | MUX_MODE0) /* (AB5) WKUP_UART0_TXD */
|
||||
AM65X_WKUP_IOPAD(0x00c8, PIN_INPUT | MUX_MODE1) /* (AC2) WKUP_GPIO0_6.WKUP_UART0_CTSn */
|
||||
AM65X_WKUP_IOPAD(0x00cc, PIN_OUTPUT | MUX_MODE1) /* (AC1) WKUP_GPIO0_7.WKUP_UART0_RTSn */
|
||||
AM65X_WKUP_IOPAD(0x00a0, PIN_INPUT, 0) /* (AB1) WKUP_UART0_RXD */
|
||||
AM65X_WKUP_IOPAD(0x00a4, PIN_OUTPUT, 0) /* (AB5) WKUP_UART0_TXD */
|
||||
AM65X_WKUP_IOPAD(0x00c8, PIN_INPUT, 1) /* (AC2) WKUP_GPIO0_6.WKUP_UART0_CTSn */
|
||||
AM65X_WKUP_IOPAD(0x00cc, PIN_OUTPUT, 1) /* (AC1) WKUP_GPIO0_7.WKUP_UART0_RTSn */
|
||||
>;
|
||||
u-boot,dm-spl;
|
||||
};
|
||||
|
||||
wkup_vtt_pins_default: wkup_vtt_pins_default {
|
||||
pinctrl-single,pins = <
|
||||
AM65X_WKUP_IOPAD(0x0040, PIN_OUTPUT_PULLUP | MUX_MODE7) /* WKUP_GPIO0_28 */
|
||||
AM65X_WKUP_IOPAD(0x0040, PIN_OUTPUT_PULLUP, 7) /* WKUP_GPIO0_28 */
|
||||
>;
|
||||
u-boot,dm-spl;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -152,8 +152,8 @@
|
|||
interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc1_pins>;
|
||||
wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; /* gpio_126 */
|
||||
cd-gpios = <&gpio4 14 IRQ_TYPE_LEVEL_LOW>; /* gpio_110 */
|
||||
wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; /* gpio_126 */
|
||||
cd-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* gpio_110 */
|
||||
vmmc-supply = <&vmmc1>;
|
||||
bus-width = <4>;
|
||||
cap-power-off-card;
|
||||
|
|
|
|||
|
|
@ -9,4 +9,20 @@ config SYS_VENDOR
|
|||
config SYS_CONFIG_NAME
|
||||
default "taurus"
|
||||
|
||||
choice
|
||||
prompt "Board Type AXM/TAURUS"
|
||||
default BOARD_AXM
|
||||
|
||||
config BOARD_AXM
|
||||
bool "AXM board type"
|
||||
help
|
||||
Select this, if you want to build for AXM board.
|
||||
|
||||
config BOARD_TAURUS
|
||||
bool "TAURUS board type"
|
||||
help
|
||||
Select this, if you want to build for TAURUS board.
|
||||
|
||||
endchoice
|
||||
|
||||
endif
|
||||
|
|
|
|||
|
|
@ -197,11 +197,11 @@ void mem_init(void)
|
|||
|
||||
/* Mirrors at A15 on ATMEL G20 SDRAM Controller with 64MB*/
|
||||
if (ram_size == 0x800) {
|
||||
printf("\n\r 64MB");
|
||||
printf("\n\r 64MB\n");
|
||||
sdramc_configure(AT91_SDRAMC_NC_9);
|
||||
} else {
|
||||
/* Size already initialized */
|
||||
printf("\n\r 128MB");
|
||||
printf("\n\r 128MB\n");
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
|
@ -282,24 +282,6 @@ int board_early_init_f(void)
|
|||
return 0;
|
||||
}
|
||||
|
||||
/* FIXME gpio code here need to handle through DM_GPIO */
|
||||
#ifndef CONFIG_DM_SPI
|
||||
int spi_cs_is_valid(unsigned int bus, unsigned int cs)
|
||||
{
|
||||
return bus == 0 && cs == 0;
|
||||
}
|
||||
|
||||
void spi_cs_activate(struct spi_slave *slave)
|
||||
{
|
||||
at91_set_gpio_value(TAURUS_SPI_CS_PIN, 0);
|
||||
}
|
||||
|
||||
void spi_cs_deactivate(struct spi_slave *slave)
|
||||
{
|
||||
at91_set_gpio_value(TAURUS_SPI_CS_PIN, 1);
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_USB_GADGET_AT91
|
||||
#include <linux/usb/at91_udc.h>
|
||||
|
||||
|
|
@ -347,17 +329,6 @@ int dram_init(void)
|
|||
return 0;
|
||||
}
|
||||
|
||||
#ifndef CONFIG_DM_ETH
|
||||
int board_eth_init(bd_t *bis)
|
||||
{
|
||||
int rc = 0;
|
||||
#ifdef CONFIG_MACB
|
||||
rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC0, 0x00);
|
||||
#endif
|
||||
return rc;
|
||||
}
|
||||
#endif
|
||||
|
||||
#if !defined(CONFIG_SPL_BUILD)
|
||||
#if defined(CONFIG_BOARD_AXM)
|
||||
/*
|
||||
|
|
|
|||
|
|
@ -399,7 +399,6 @@ void enable_board_pin_mux(void)
|
|||
configure_module_pin_mux(mii1_pin_mux);
|
||||
}
|
||||
/* Beaglebone LT pinmux */
|
||||
configure_module_pin_mux(mii1_pin_mux);
|
||||
configure_module_pin_mux(mmc0_pin_mux);
|
||||
#if defined(CONFIG_NAND) && defined(CONFIG_EMMC_BOOT)
|
||||
configure_module_pin_mux(nand_pin_mux);
|
||||
|
|
|
|||
|
|
@ -31,7 +31,7 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=nand.0:128k(NAND.SPL),128k(NAND.SPL.backup1),1
|
|||
# CONFIG_SPL_EFI_PARTITION is not set
|
||||
CONFIG_OF_CONTROL=y
|
||||
CONFIG_DEFAULT_DEVICE_TREE="am335x-evm"
|
||||
CONFIG_OF_LIST="am335x-evm am335x-bone am335x-boneblack am335x-evmsk am335x-bonegreen am335x-icev2"
|
||||
CONFIG_OF_LIST="am335x-evm am335x-bone am335x-boneblack am335x-evmsk am335x-bonegreen am335x-icev2 am335x-pocketbeagle"
|
||||
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
|
||||
CONFIG_SPL_ENV_IS_NOWHERE=y
|
||||
CONFIG_BOOTCOUNT_LIMIT=y
|
||||
|
|
|
|||
|
|
@ -1,46 +1,74 @@
|
|||
CONFIG_ARM=y
|
||||
CONFIG_SPL_SYS_THUMB_BUILD=y
|
||||
CONFIG_SYS_THUMB_BUILD=y
|
||||
# CONFIG_SPL_USE_ARCH_MEMCPY is not set
|
||||
# CONFIG_SPL_USE_ARCH_MEMSET is not set
|
||||
CONFIG_ARCH_AT91=y
|
||||
CONFIG_SPL_LDSCRIPT="arch/$(ARCH)/cpu/u-boot-spl.lds"
|
||||
CONFIG_SYS_TEXT_BASE=0x21000000
|
||||
CONFIG_TARGET_TAURUS=y
|
||||
CONFIG_SPL_GPIO_SUPPORT=y
|
||||
CONFIG_SPL_LIBCOMMON_SUPPORT=y
|
||||
CONFIG_SPL_LIBGENERIC_SUPPORT=y
|
||||
CONFIG_SPL_SERIAL_SUPPORT=y
|
||||
CONFIG_SYS_MALLOC_F_LEN=0x2000
|
||||
CONFIG_SPL_SYS_MALLOC_F_LEN=0x1000
|
||||
CONFIG_NR_DRAM_BANKS=1
|
||||
CONFIG_SPL=y
|
||||
CONFIG_DEBUG_UART_BASE=0xfffff200
|
||||
CONFIG_DEBUG_UART_CLOCK=18432000
|
||||
CONFIG_SPL_SPI_FLASH_SUPPORT=y
|
||||
CONFIG_SPL_SPI_SUPPORT=y
|
||||
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,MACH_TYPE=2068,BOARD_AXM"
|
||||
CONFIG_DEBUG_UART=y
|
||||
CONFIG_TPL_SYS_MALLOC_F_LEN=0x1000
|
||||
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,MACH_TYPE=2068"
|
||||
CONFIG_BOOTDELAY=3
|
||||
CONFIG_USE_BOOTARGS=y
|
||||
CONFIG_BOOTARGS="\0addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}::off\0addtest=setenv bootargs ${bootargs} loglevel=4 test\0baudrate=115200\0boot_file=setenv bootfile /${project_dir}/kernel/uImage\0boot_retries=0\0bootcmd=run flash_self\0bootdelay=3\0ethact=macb0\0flash_nfs=run nand_kernel;run nfsargs;run addip;upgrade_available;bootm ${kernel_ram};reset\0flash_self=run nand_kernel;run setbootargs;upgrade_available;bootm ${kernel_ram};reset\0flash_self_test=run nand_kernel;run setbootargs addtest; upgrade_available;bootm ${kernel_ram};reset\0hostname=systemone\0kernel_Off=0x00200000\0kernel_Off_fallback=0x03800000\0kernel_ram=0x21500000\0kernel_size=0x00400000\0kernel_size_fallback=0x00400000\0loads_echo=1\0nand_kernel=nand read.e ${kernel_ram} ${kernel_Off} ${kernel_size}\0net_nfs=run boot_file;tftp ${kernel_ram} ${bootfile};run nfsargs;run addip;upgrade_available;bootm ${kernel_ram};reset\0netdev=eth0\0nfsargs=run root_path;setenv bootargs ${bootargs} root=/dev/nfs rw nfsroot=${serverip}:${rootpath} at91sam9_wdt.wdt_timeout=16\0partitionset_active=A\0preboot=echo;echo Type 'run flash_self' to use kernel and root filesystem on memory;echo Type 'run flash_nfs' to use kernel from memory and root filesystem over NFS;echo Type 'run net_nfs' to get Kernel over TFTP and mount root filesystem over NFS;echo\0project_dir=systemone\0root_path=setenv rootpath /home/projects/${project_dir}/rootfs\0rootfs=/dev/mtdblock5\0rootfs_fallback=/dev/mtdblock7\0setbootargs=setenv bootargs ${bootargs} console=ttyMTD,mtdoops root=${rootfs} rootfstype=jffs2 panic=7 at91sam9_wdt.wdt_timeout=16\0stderr=serial\0stdin=serial\0stdout=serial\0upgrade_available=0\0"
|
||||
CONFIG_USE_BOOTCOMMAND=y
|
||||
CONFIG_BOOTCOMMAND="run flash_self"
|
||||
# CONFIG_DISPLAY_BOARDINFO is not set
|
||||
CONFIG_BOARD_EARLY_INIT_F=y
|
||||
# CONFIG_SPL_LEGACY_IMAGE_SUPPORT is not set
|
||||
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
|
||||
# CONFIG_TPL_BANNER_PRINT is not set
|
||||
CONFIG_SPL_CRC32_SUPPORT=y
|
||||
CONFIG_SPL_NAND_SUPPORT=y
|
||||
CONFIG_SPL_SPI_LOAD=y
|
||||
CONFIG_HUSH_PARSER=y
|
||||
CONFIG_SYS_PROMPT="U-Boot> "
|
||||
# CONFIG_CMD_BDI is not set
|
||||
CONFIG_CMD_BOOTZ=y
|
||||
# CONFIG_CMD_IMI is not set
|
||||
# CONFIG_CMD_LOADS is not set
|
||||
CONFIG_CMD_NAND=y
|
||||
# CONFIG_CMD_PINMUX is not set
|
||||
CONFIG_CMD_SF=y
|
||||
CONFIG_CMD_SPI=y
|
||||
# CONFIG_CMD_SOURCE is not set
|
||||
# CONFIG_CMD_SETEXPR is not set
|
||||
CONFIG_CMD_DHCP=y
|
||||
CONFIG_CMD_PING=y
|
||||
CONFIG_CMD_MTDPARTS=y
|
||||
CONFIG_OF_CONTROL=y
|
||||
CONFIG_OF_EMBED=y
|
||||
CONFIG_SPL_OF_CONTROL=y
|
||||
CONFIG_DEFAULT_DEVICE_TREE="at91sam9g20-taurus"
|
||||
CONFIG_SPL_OF_PLATDATA=y
|
||||
CONFIG_ENV_IS_IN_NAND=y
|
||||
CONFIG_SPL_DM=y
|
||||
CONFIG_BLK=y
|
||||
CONFIG_HAVE_BLOCK_DEVICE=y
|
||||
CONFIG_CLK=y
|
||||
CONFIG_CLK_AT91=y
|
||||
# CONFIG_MMC is not set
|
||||
CONFIG_NAND=y
|
||||
CONFIG_NAND_ATMEL=y
|
||||
CONFIG_DM_SPI_FLASH=y
|
||||
CONFIG_SPI_FLASH=y
|
||||
CONFIG_SPI_FLASH_STMICRO=y
|
||||
CONFIG_PHYLIB=y
|
||||
CONFIG_PINCTRL=y
|
||||
CONFIG_PINCTRL_AT91=y
|
||||
CONFIG_SPECIFY_CONSOLE_INDEX=y
|
||||
CONFIG_DEBUG_UART_ATMEL=y
|
||||
CONFIG_ATMEL_USART=y
|
||||
CONFIG_WDT=y
|
||||
CONFIG_WDT_AT91=y
|
||||
CONFIG_USE_TINY_PRINTF=y
|
||||
CONFIG_HEXDUMP=y
|
||||
# CONFIG_EFI_LOADER is not set
|
||||
|
|
|
|||
|
|
@ -1,36 +1,48 @@
|
|||
CONFIG_ARM=y
|
||||
CONFIG_SPL_SYS_THUMB_BUILD=y
|
||||
CONFIG_SYS_THUMB_BUILD=y
|
||||
# CONFIG_SPL_USE_ARCH_MEMCPY is not set
|
||||
# CONFIG_SPL_USE_ARCH_MEMSET is not set
|
||||
CONFIG_ARCH_AT91=y
|
||||
CONFIG_SPL_LDSCRIPT="arch/$(ARCH)/cpu/u-boot-spl.lds"
|
||||
CONFIG_SYS_TEXT_BASE=0x21000000
|
||||
CONFIG_TARGET_TAURUS=y
|
||||
CONFIG_BOARD_TAURUS=y
|
||||
CONFIG_SPL_GPIO_SUPPORT=y
|
||||
CONFIG_SPL_LIBCOMMON_SUPPORT=y
|
||||
CONFIG_SPL_LIBGENERIC_SUPPORT=y
|
||||
CONFIG_SYS_MALLOC_F_LEN=0x1000
|
||||
CONFIG_SPL_SERIAL_SUPPORT=y
|
||||
CONFIG_SYS_MALLOC_F_LEN=0x2000
|
||||
CONFIG_SPL_SYS_MALLOC_F_LEN=0x1000
|
||||
CONFIG_NR_DRAM_BANKS=1
|
||||
CONFIG_SPL=y
|
||||
CONFIG_DEBUG_UART_BASE=0xfffff200
|
||||
CONFIG_DEBUG_UART_CLOCK=18432000
|
||||
CONFIG_SPL_SPI_FLASH_SUPPORT=y
|
||||
CONFIG_SPL_SPI_SUPPORT=y
|
||||
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,MACH_TYPE=2067,BOARD_TAURUS"
|
||||
CONFIG_DEBUG_UART=y
|
||||
CONFIG_TPL_SYS_MALLOC_F_LEN=0x1000
|
||||
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,MACH_TYPE=2067"
|
||||
CONFIG_BOOTDELAY=3
|
||||
CONFIG_USE_BOOTARGS=y
|
||||
CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2"
|
||||
CONFIG_USE_BOOTCOMMAND=y
|
||||
CONFIG_BOOTCOMMAND="nand read 0x22000000 0x200000 0x300000; bootm"
|
||||
# CONFIG_DISPLAY_BOARDINFO is not set
|
||||
CONFIG_BOARD_EARLY_INIT_F=y
|
||||
# CONFIG_SPL_LEGACY_IMAGE_SUPPORT is not set
|
||||
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
|
||||
# CONFIG_TPL_BANNER_PRINT is not set
|
||||
CONFIG_SPL_CRC32_SUPPORT=y
|
||||
CONFIG_SPL_NAND_SUPPORT=y
|
||||
CONFIG_SPL_SPI_LOAD=y
|
||||
CONFIG_HUSH_PARSER=y
|
||||
CONFIG_SYS_PROMPT="U-Boot> "
|
||||
CONFIG_SYS_XTRACE="n"
|
||||
# CONFIG_CMD_BDI is not set
|
||||
CONFIG_CMD_BOOTZ=y
|
||||
# CONFIG_CMD_IMI is not set
|
||||
CONFIG_CMD_DFU=y
|
||||
# CONFIG_CMD_LOADS is not set
|
||||
CONFIG_CMD_NAND=y
|
||||
# CONFIG_CMD_PINMUX is not set
|
||||
CONFIG_CMD_SF=y
|
||||
CONFIG_CMD_SPI=y
|
||||
CONFIG_CMD_USB=y
|
||||
|
|
@ -41,19 +53,30 @@ CONFIG_CMD_PING=y
|
|||
CONFIG_CMD_MTDPARTS=y
|
||||
# CONFIG_DOS_PARTITION is not set
|
||||
CONFIG_OF_CONTROL=y
|
||||
CONFIG_OF_EMBED=y
|
||||
CONFIG_SPL_OF_CONTROL=y
|
||||
CONFIG_DEFAULT_DEVICE_TREE="at91sam9g20-taurus"
|
||||
CONFIG_SPL_OF_PLATDATA=y
|
||||
CONFIG_ENV_IS_IN_NAND=y
|
||||
CONFIG_SPL_DM=y
|
||||
CONFIG_BLK=y
|
||||
CONFIG_CLK=y
|
||||
CONFIG_CLK_AT91=y
|
||||
CONFIG_DFU_NAND=y
|
||||
# CONFIG_MMC is not set
|
||||
CONFIG_NAND=y
|
||||
CONFIG_NAND_ATMEL=y
|
||||
CONFIG_DM_SPI_FLASH=y
|
||||
CONFIG_SPI_FLASH=y
|
||||
CONFIG_SPI_FLASH_STMICRO=y
|
||||
CONFIG_PHYLIB=y
|
||||
CONFIG_PINCTRL=y
|
||||
CONFIG_PINCTRL_AT91=y
|
||||
CONFIG_SPECIFY_CONSOLE_INDEX=y
|
||||
CONFIG_DEBUG_UART_ATMEL=y
|
||||
CONFIG_ATMEL_USART=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_DM_USB=y
|
||||
# CONFIG_SPL_DM_USB is not set
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_USB_GADGET_MANUFACTURER="Siemens AG"
|
||||
|
|
@ -63,3 +86,5 @@ CONFIG_USB_GADGET_DOWNLOAD=y
|
|||
CONFIG_WDT=y
|
||||
CONFIG_WDT_AT91=y
|
||||
CONFIG_USE_TINY_PRINTF=y
|
||||
CONFIG_HEXDUMP=y
|
||||
# CONFIG_EFI_LOADER is not set
|
||||
|
|
|
|||
|
|
@ -1,108 +1,47 @@
|
|||
Summary
|
||||
=======
|
||||
|
||||
This README is about U-Boot support for TI's ARM 926EJS based family of SoCs.
|
||||
These SOCs are used for cameras, video security and surveillance, DVR's, etc.
|
||||
DaVinci SOC's comprise of DM644x, DM646x, DM35x and DM36x series of SOC's
|
||||
Additionally there are some SOCs meant for the audio market which though have
|
||||
an OMAP part number are very similar to the DaVinci series of SOC's
|
||||
Additionally, some family members contain a TI DSP and/or graphics
|
||||
co processors along with a host of other peripherals.
|
||||
Note: this document used to be about the entire family of DaVinci SOCs but the
|
||||
support for the DM* family and DA830 has since been dropped.
|
||||
|
||||
This README is about U-Boot support for TI's DA850 SoC. This SOC has an OMAP
|
||||
part number but is very similar to the DaVinci series.
|
||||
|
||||
Currently the following boards are supported:
|
||||
|
||||
* TI DaVinci DM644x EVM
|
||||
|
||||
* TI DaVinci DM646x EVM
|
||||
|
||||
* TI DaVinci DM355 EVM
|
||||
|
||||
* TI DaVinci DM365 EVM
|
||||
|
||||
* TI DA830 EVM
|
||||
|
||||
* TI DA850 EVM
|
||||
|
||||
* DM355 based Leopard board
|
||||
* TI OMAP-L138 LCDK
|
||||
|
||||
* DM644x based schmoogie board
|
||||
|
||||
* DM644x based sffsdr board
|
||||
|
||||
* DM644x based sonata board
|
||||
* Lego EV3
|
||||
|
||||
Build
|
||||
=====
|
||||
|
||||
* TI DaVinci DM644x EVM:
|
||||
|
||||
make davinci_dvevm_config
|
||||
make
|
||||
|
||||
* TI DaVinci DM646x EVM:
|
||||
|
||||
make davinci_dm6467evm_config
|
||||
make
|
||||
|
||||
* TI DaVinci DM355 EVM:
|
||||
|
||||
make davinci_dm355evm_config
|
||||
make
|
||||
|
||||
* TI DaVinci DM365 EVM:
|
||||
|
||||
make davinci_dm365evm_config
|
||||
make
|
||||
|
||||
* TI DA830 EVM:
|
||||
|
||||
make da830evm_config
|
||||
make
|
||||
|
||||
* TI DA850 EVM:
|
||||
|
||||
make da850evm_config
|
||||
make
|
||||
|
||||
* DM355 based Leopard board:
|
||||
* TI OMAP-L138 LCDK
|
||||
|
||||
make davinci_dm355leopard_config
|
||||
make omapl138_lcdk_defconfig
|
||||
make
|
||||
|
||||
* DM644x based schmoogie board:
|
||||
* Lego EV3
|
||||
|
||||
make davinci_schmoogie_config
|
||||
make
|
||||
|
||||
* DM644x based sffsdr board:
|
||||
|
||||
make davinci_sffsdr_config
|
||||
make
|
||||
|
||||
* DM644x based sonata board:
|
||||
|
||||
make davinci_sonata_config
|
||||
make legoev3_defconfig
|
||||
make
|
||||
|
||||
Bootloaders
|
||||
===============
|
||||
|
||||
The DaVinci SOC's use 2 bootloaders. The low level initialization
|
||||
is done by a UBL(user boot loader). The UBL is written to a NAND/NOR/SPI flash
|
||||
by a programmer. During initial bootup, the ROM Bootloader reads the UBL
|
||||
from a storage device and loads it into the IRAM. The UBL then loads the U-Boot
|
||||
into the RAM.
|
||||
The programmers and UBL are always released as part of any standard TI
|
||||
software release associated with an SOC.
|
||||
For DA850 an SPL (secondary program loader, see doc/README.SPL) is provided
|
||||
to load U-Boot directly from SPI flash. The SPL takes care of the low level
|
||||
initialization.
|
||||
|
||||
Alternative boot method (DA850 EVM only):
|
||||
For the DA850 EVM an SPL (secondary program loader, see doc/README.SPL)
|
||||
is provided to load U-Boot directly from SPI flash. In this case, the
|
||||
SPL does the low level initialization that is otherwise done by the SPL.
|
||||
To build U-Boot with this SPL, do
|
||||
make da850evm_config
|
||||
make u-boot.ais
|
||||
and program the resulting u-boot.ais file to the SPI flash of the DA850 EVM.
|
||||
The SPL is built as u-boot.ais for all DA850 defconfigs. The resulting
|
||||
image file can be programmed to the SPI flash of the DA850 EVM/LCDK.
|
||||
|
||||
Environment Variables
|
||||
=====================
|
||||
|
|
@ -121,34 +60,14 @@ is used to obtain this information.
|
|||
Links
|
||||
=====
|
||||
|
||||
1) TI DaVinci DM355 EVM:
|
||||
http://focus.ti.com/docs/prod/folders/print/tms320dm355.html
|
||||
http://www.spectrumdigital.com/product_info.php?cPath=103&products_id=203&osCsid=c499af6087317f11b3da19b4e8f1af32
|
||||
|
||||
2) TI DaVinci DM365 EVM:
|
||||
http://focus.ti.com/docs/prod/folders/print/tms320dm365.html?247SEM=
|
||||
http://support.spectrumdigital.com/boards/evmdm365/revc/
|
||||
|
||||
3) DaVinci DM355 based leopard board
|
||||
http://designsomething.org/leopardboard/default.aspx
|
||||
http://www.spectrumdigital.com/product_info.php?cPath=103&products_id=192&osCsid=67c20335668ffc57cb35727106eb24b1
|
||||
|
||||
4) TI DaVinci DM6467 EVM:
|
||||
http://focus.ti.com/docs/prod/folders/print/tms320dm6467.html
|
||||
http://support.spectrumdigital.com/boards/evmdm6467/revf/
|
||||
|
||||
5) TI DaVinci DM6446 EVM:
|
||||
http://focus.ti.com/docs/prod/folders/print/tms320dm6446.html
|
||||
http://www.spectrumdigital.com/product_info.php?cPath=103&products_id=222
|
||||
|
||||
6) TI DA830 EVM
|
||||
http://focus.ti.com/apps/docs/gencontent.tsp?appId=1&contentId=52385
|
||||
http://www.spectrumdigital.com/product_info.php?cPath=37&products_id=214
|
||||
|
||||
7) TI DA850 EVM
|
||||
1) TI DA850 EVM
|
||||
http://focus.ti.com/docs/prod/folders/print/omap-l138.html
|
||||
http://www.logicpd.com/products/development-kits/zoom-omap-l138-evm-development-kit
|
||||
|
||||
2) TI OMAP-L138 LCDK
|
||||
http://focus.ti.com/docs/prod/folders/print/omap-l138.html
|
||||
http://www.ti.com/tool/TMDXLCDK138
|
||||
|
||||
Davinci special defines
|
||||
=======================
|
||||
|
||||
|
|
|
|||
|
|
@ -22,6 +22,7 @@ alias bmeng Bin Meng <bmeng.cn@gmail.com>
|
|||
alias danielschwierzeck Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
|
||||
alias dinh Dinh Nguyen <dinguyen@kernel.org>
|
||||
alias hs Heiko Schocher <hs@denx.de>
|
||||
alias freenix Peng Fan <peng.fan@nxp.com>
|
||||
alias iwamatsu Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
|
||||
alias jaehoon Jaehoon Chung <jh80.chung@samsung.com>
|
||||
alias jagan Jagan Teki <jagan@amarulasolutions.com>
|
||||
|
|
@ -111,7 +112,7 @@ alias kerneldoc uboot, marex
|
|||
alias fdt uboot, sjg
|
||||
alias i2c uboot, hs
|
||||
alias kconfig uboot, masahiro
|
||||
alias mmc uboot, jaehoon
|
||||
alias mmc uboot, freenix
|
||||
alias nand uboot
|
||||
alias net uboot, jhersh
|
||||
alias phy uboot, jhersh
|
||||
|
|
|
|||
|
|
@ -575,14 +575,6 @@ static int udma_get_tchan(struct udma_chan *uc)
|
|||
|
||||
pr_debug("chan%d: got tchan%d\n", uc->id, uc->tchan->id);
|
||||
|
||||
if (udma_is_chan_running(uc)) {
|
||||
dev_warn(ud->dev, "chan%d: tchan%d is running!\n", uc->id,
|
||||
uc->tchan->id);
|
||||
udma_stop(uc);
|
||||
if (udma_is_chan_running(uc))
|
||||
dev_err(ud->dev, "chan%d: won't stop!\n", uc->id);
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
|
@ -602,14 +594,6 @@ static int udma_get_rchan(struct udma_chan *uc)
|
|||
|
||||
pr_debug("chan%d: got rchan%d\n", uc->id, uc->rchan->id);
|
||||
|
||||
if (udma_is_chan_running(uc)) {
|
||||
dev_warn(ud->dev, "chan%d: rchan%d is running!\n", uc->id,
|
||||
uc->rchan->id);
|
||||
udma_stop(uc);
|
||||
if (udma_is_chan_running(uc))
|
||||
dev_err(ud->dev, "chan%d: won't stop!\n", uc->id);
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
|
@ -652,14 +636,6 @@ static int udma_get_chan_pair(struct udma_chan *uc)
|
|||
|
||||
pr_debug("chan%d: got t/rchan%d pair\n", uc->id, chan_id);
|
||||
|
||||
if (udma_is_chan_running(uc)) {
|
||||
dev_warn(ud->dev, "chan%d: t/rchan%d pair is running!\n",
|
||||
uc->id, chan_id);
|
||||
udma_stop(uc);
|
||||
if (udma_is_chan_running(uc))
|
||||
dev_err(ud->dev, "chan%d: won't stop!\n", uc->id);
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
|
@ -1071,6 +1047,15 @@ static int udma_alloc_chan_resources(struct udma_chan *uc)
|
|||
}
|
||||
}
|
||||
|
||||
if (udma_is_chan_running(uc)) {
|
||||
dev_warn(ud->dev, "chan%d: is running!\n", uc->id);
|
||||
udma_stop(uc);
|
||||
if (udma_is_chan_running(uc)) {
|
||||
dev_err(ud->dev, "chan%d: won't stop!\n", uc->id);
|
||||
goto err_free_res;
|
||||
}
|
||||
}
|
||||
|
||||
/* PSI-L pairing */
|
||||
ret = udma_navss_psil_pair(ud, uc->src_thread, uc->dst_thread);
|
||||
if (ret) {
|
||||
|
|
@ -1492,7 +1477,7 @@ static int udma_send(struct dma *dma, void *src, size_t len, void *metadata)
|
|||
u32 tc_ring_id;
|
||||
int ret;
|
||||
|
||||
if (!metadata)
|
||||
if (metadata)
|
||||
packet_data = *((struct ti_udma_drv_packet_data *)metadata);
|
||||
|
||||
if (dma->id >= (ud->rchan_cnt + ud->tchan_cnt)) {
|
||||
|
|
|
|||
|
|
@ -158,7 +158,7 @@ static inline int ti_sci_get_response(struct ti_sci_info *info,
|
|||
int ret;
|
||||
|
||||
/* Receive the response */
|
||||
ret = mbox_recv(chan, msg, info->desc->max_rx_timeout_ms);
|
||||
ret = mbox_recv(chan, msg, info->desc->max_rx_timeout_ms * 1000);
|
||||
if (ret) {
|
||||
dev_err(info->dev, "%s: Message receive failed. ret = %d\n",
|
||||
__func__, ret);
|
||||
|
|
@ -257,7 +257,8 @@ static int ti_sci_cmd_get_revision(struct ti_sci_handle *handle)
|
|||
|
||||
info = handle_to_ti_sci_info(handle);
|
||||
|
||||
xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_VERSION, 0x0,
|
||||
xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_VERSION,
|
||||
TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
|
||||
(u32 *)&hdr, sizeof(struct ti_sci_msg_hdr),
|
||||
sizeof(*rev_info));
|
||||
if (IS_ERR(xfer)) {
|
||||
|
|
@ -499,8 +500,8 @@ static int ti_sci_get_device_state(const struct ti_sci_handle *handle,
|
|||
|
||||
info = handle_to_ti_sci_info(handle);
|
||||
|
||||
/* Response is expected, so need of any flags */
|
||||
xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_GET_DEVICE_STATE, 0,
|
||||
xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_GET_DEVICE_STATE,
|
||||
TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
|
||||
(u32 *)&req, sizeof(req), sizeof(*resp));
|
||||
if (IS_ERR(xfer)) {
|
||||
ret = PTR_ERR(xfer);
|
||||
|
|
@ -2574,8 +2575,8 @@ static int ti_sci_cmd_change_fwl_owner(const struct ti_sci_handle *handle,
|
|||
|
||||
info = handle_to_ti_sci_info(handle);
|
||||
|
||||
xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_FWL_GET,
|
||||
TISCI_MSG_FWL_CHANGE_OWNER,
|
||||
xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_FWL_CHANGE_OWNER,
|
||||
TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
|
||||
(u32 *)&req, sizeof(req), sizeof(*resp));
|
||||
if (IS_ERR(xfer)) {
|
||||
ret = PTR_ERR(xfer);
|
||||
|
|
|
|||
|
|
@ -55,7 +55,7 @@ config WDT
|
|||
help
|
||||
Enable driver model for watchdog timer. At the moment the API
|
||||
is very simple and only supports four operations:
|
||||
start, restart, stop and reset (expire immediately).
|
||||
start, stop, reset and expire_now (expire immediately).
|
||||
What exactly happens when the timer expires is up to a particular
|
||||
device/driver.
|
||||
|
||||
|
|
|
|||
|
|
@ -119,17 +119,17 @@ int btrfs_ls(const char *path)
|
|||
|
||||
if (inr == -1ULL) {
|
||||
printf("Cannot lookup path %s\n", path);
|
||||
return 1;
|
||||
return -1;
|
||||
}
|
||||
|
||||
if (type != BTRFS_FT_DIR) {
|
||||
printf("Not a directory: %s\n", path);
|
||||
return 1;
|
||||
return -1;
|
||||
}
|
||||
|
||||
if (btrfs_readdir(&root, inr, readdir_callback)) {
|
||||
printf("An error occured while listing directory %s\n", path);
|
||||
return 1;
|
||||
return -1;
|
||||
}
|
||||
|
||||
return 0;
|
||||
|
|
@ -158,12 +158,12 @@ int btrfs_size(const char *file, loff_t *size)
|
|||
|
||||
if (inr == -1ULL) {
|
||||
printf("Cannot lookup file %s\n", file);
|
||||
return 1;
|
||||
return -1;
|
||||
}
|
||||
|
||||
if (type != BTRFS_FT_REG_FILE) {
|
||||
printf("Not a regular file: %s\n", file);
|
||||
return 1;
|
||||
return -1;
|
||||
}
|
||||
|
||||
*size = inode.size;
|
||||
|
|
@ -183,12 +183,12 @@ int btrfs_read(const char *file, void *buf, loff_t offset, loff_t len,
|
|||
|
||||
if (inr == -1ULL) {
|
||||
printf("Cannot lookup file %s\n", file);
|
||||
return 1;
|
||||
return -1;
|
||||
}
|
||||
|
||||
if (type != BTRFS_FT_REG_FILE) {
|
||||
printf("Not a regular file: %s\n", file);
|
||||
return 1;
|
||||
return -1;
|
||||
}
|
||||
|
||||
if (!len)
|
||||
|
|
@ -200,7 +200,7 @@ int btrfs_read(const char *file, void *buf, loff_t offset, loff_t len,
|
|||
rd = btrfs_file_read(&root, inr, offset, len, buf);
|
||||
if (rd == -1ULL) {
|
||||
printf("An error occured while reading file %s\n", file);
|
||||
return 1;
|
||||
return -1;
|
||||
}
|
||||
|
||||
*actread = rd;
|
||||
|
|
|
|||
|
|
@ -198,17 +198,16 @@ int btrfs_read_superblock(void)
|
|||
break;
|
||||
|
||||
if (btrfs_check_super_csum(raw_sb)) {
|
||||
printf("%s: invalid checksum at superblock mirror %i\n",
|
||||
__func__, i);
|
||||
debug("%s: invalid checksum at superblock mirror %i\n",
|
||||
__func__, i);
|
||||
continue;
|
||||
}
|
||||
|
||||
btrfs_super_block_to_cpu(sb);
|
||||
|
||||
if (sb->magic != BTRFS_MAGIC) {
|
||||
printf("%s: invalid BTRFS magic 0x%016llX at "
|
||||
"superblock mirror %i\n", __func__, sb->magic,
|
||||
i);
|
||||
debug("%s: invalid BTRFS magic 0x%016llX at "
|
||||
"superblock mirror %i\n", __func__, sb->magic, i);
|
||||
} else if (sb->bytenr != superblock_offsets[i]) {
|
||||
printf("%s: invalid bytenr 0x%016llX (expected "
|
||||
"0x%016llX) at superblock mirror %i\n",
|
||||
|
|
@ -224,7 +223,7 @@ int btrfs_read_superblock(void)
|
|||
}
|
||||
|
||||
if (!btrfs_info.sb.generation) {
|
||||
printf("%s: No valid BTRFS superblock found!\n", __func__);
|
||||
debug("%s: No valid BTRFS superblock found!\n", __func__);
|
||||
return -1;
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -41,6 +41,7 @@
|
|||
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
|
||||
#define CONFIG_SETUP_MEMORY_TAGS
|
||||
#define CONFIG_INITRD_TAG
|
||||
|
||||
#define CONFIG_SKIP_LOWLEVEL_INIT_ONLY
|
||||
|
||||
/* general purpose I/O */
|
||||
|
|
@ -48,12 +49,9 @@
|
|||
#define CONFIG_AT91_GPIO
|
||||
#define CONFIG_AT91_GPIO_PULLUP 1 /* keep pullups on peripheral pins */
|
||||
|
||||
/* serial console */
|
||||
#define CONFIG_ATMEL_USART
|
||||
#define CONFIG_USART_BASE ATMEL_BASE_DBGU
|
||||
#define CONFIG_USART_ID ATMEL_ID_SYS
|
||||
|
||||
|
||||
/*
|
||||
* SDRAM: 1 bank, min 32, max 128 MB
|
||||
* Initialized before u-boot gets started.
|
||||
|
|
@ -106,7 +104,6 @@
|
|||
|
||||
/* SPI EEPROM */
|
||||
#define TAURUS_SPI_MASK (1 << 4)
|
||||
#define TAURUS_SPI_CS_PIN AT91_PIN_PA3
|
||||
|
||||
#if defined(CONFIG_SPL_BUILD)
|
||||
/* SPL related */
|
||||
|
|
@ -120,8 +117,57 @@
|
|||
#define CONFIG_ENV_OFFSET 0x100000
|
||||
#define CONFIG_ENV_OFFSET_REDUND 0x180000
|
||||
#define CONFIG_ENV_SIZE (SZ_128K) /* 1 sector = 128 kB */
|
||||
#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x300000; bootm"
|
||||
|
||||
#ifndef CONFIG_SPL_BUILD
|
||||
#if defined(CONFIG_BOARD_AXM)
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:" \
|
||||
"${gatewayip}:${netmask}:${hostname}:${netdev}::off\0" \
|
||||
"addtest=setenv bootargs ${bootargs} loglevel=4 test\0" \
|
||||
"boot_file=setenv bootfile /${project_dir}/kernel/uImage\0" \
|
||||
"boot_retries=0\0" \
|
||||
"ethact=macb0\0" \
|
||||
"flash_nfs=run nand_kernel;run nfsargs;run addip;" \
|
||||
"upgrade_available;bootm ${kernel_ram};reset\0" \
|
||||
"flash_self=run nand_kernel;run setbootargs;upgrade_available;" \
|
||||
"bootm ${kernel_ram};reset\0" \
|
||||
"flash_self_test=run nand_kernel;run setbootargs addtest;" \
|
||||
"upgrade_available;bootm ${kernel_ram};reset\0" \
|
||||
"hostname=systemone\0" \
|
||||
"kernel_Off=0x00200000\0" \
|
||||
"kernel_Off_fallback=0x03800000\0" \
|
||||
"kernel_ram=0x21500000\0" \
|
||||
"kernel_size=0x00400000\0" \
|
||||
"kernel_size_fallback=0x00400000\0" \
|
||||
"loads_echo=1\0" \
|
||||
"nand_kernel=nand read.e ${kernel_ram} ${kernel_Off} " \
|
||||
"${kernel_size}\0" \
|
||||
"net_nfs=run boot_file;tftp ${kernel_ram} ${bootfile};" \
|
||||
"run nfsargs;run addip;upgrade_available;" \
|
||||
"bootm ${kernel_ram};reset\0" \
|
||||
"netdev=eth0\0" \
|
||||
"nfsargs=run root_path;setenv bootargs ${bootargs} root=/dev/nfs " \
|
||||
"rw nfsroot=${serverip}:${rootpath} " \
|
||||
"at91sam9_wdt.wdt_timeout=16\0" \
|
||||
"partitionset_active=A\0" \
|
||||
"preboot=echo;echo Type 'run flash_self' to use kernel and root " \
|
||||
"filesystem on memory;echo Type 'run flash_nfs' to use " \
|
||||
"kernel from memory and root filesystem over NFS;echo Type " \
|
||||
"'run net_nfs' to get Kernel over TFTP and mount root " \
|
||||
"filesystem over NFS;echo\0" \
|
||||
"project_dir=systemone\0" \
|
||||
"root_path=setenv rootpath /home/projects/${project_dir}/rootfs\0" \
|
||||
"rootfs=/dev/mtdblock5\0" \
|
||||
"rootfs_fallback=/dev/mtdblock7\0" \
|
||||
"setbootargs=setenv bootargs ${bootargs} console=ttyMTD,mtdoops " \
|
||||
"root=${rootfs} rootfstype=jffs2 panic=7 " \
|
||||
"at91sam9_wdt.wdt_timeout=16\0" \
|
||||
"stderr=serial\0" \
|
||||
"stdin=serial\0" \
|
||||
"stdout=serial\0" \
|
||||
"upgrade_available=0\0"
|
||||
#endif
|
||||
#endif /* #ifndef CONFIG_SPL_BUILD */
|
||||
/*
|
||||
* Size of malloc() pool
|
||||
*/
|
||||
|
|
|
|||
|
|
@ -7,17 +7,6 @@
|
|||
#ifndef _DT_BINDINGS_PINCTRL_TI_K3_AM65_H
|
||||
#define _DT_BINDINGS_PINCTRL_TI_K3_AM65_H
|
||||
|
||||
/* K3 mux mode options for each pin. See TRM for options */
|
||||
#define MUX_MODE0 0
|
||||
#define MUX_MODE1 1
|
||||
#define MUX_MODE2 2
|
||||
#define MUX_MODE3 3
|
||||
#define MUX_MODE4 4
|
||||
#define MUX_MODE5 5
|
||||
#define MUX_MODE6 6
|
||||
#define MUX_MODE7 7
|
||||
#define MUX_MODE15 15
|
||||
|
||||
#define PULL_DISABLE (1 << 16)
|
||||
#define PULL_UP (1 << 17)
|
||||
#define INPUT_EN (1 << 18)
|
||||
|
|
@ -43,7 +32,7 @@
|
|||
#define PIN_INPUT_PULLUP (INPUT_EN | PULL_UP)
|
||||
#define PIN_INPUT_PULLDOWN (INPUT_EN)
|
||||
|
||||
#define AM65X_IOPAD(pa, val) (((pa) & 0x1fff)) (val)
|
||||
#define AM65X_WKUP_IOPAD(pa, val) (((pa) & 0x1fff)) (val)
|
||||
#define AM65X_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode))
|
||||
#define AM65X_WKUP_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode))
|
||||
|
||||
#endif
|
||||
39
include/fs.h
39
include/fs.h
|
|
@ -71,30 +71,33 @@ int fs_exists(const char *filename);
|
|||
*/
|
||||
int fs_size(const char *filename, loff_t *size);
|
||||
|
||||
/*
|
||||
* fs_read - Read file from the partition previously set by fs_set_blk_dev()
|
||||
* Note that not all filesystem types support either/both offset!=0 or len!=0.
|
||||
/**
|
||||
* fs_read() - read file from the partition previously set by fs_set_blk_dev()
|
||||
*
|
||||
* @filename: Name of file to read from
|
||||
* @addr: The address to read into
|
||||
* @offset: The offset in file to read from
|
||||
* @len: The number of bytes to read. Maybe 0 to read entire file
|
||||
* @actread: Returns the actual number of bytes read
|
||||
* @return 0 if ok with valid *actread, -1 on error conditions
|
||||
* Note that not all filesystem drivers support either or both of offset != 0
|
||||
* and len != 0.
|
||||
*
|
||||
* @filename: full path of the file to read from
|
||||
* @addr: address of the buffer to write to
|
||||
* @offset: offset in the file from where to start reading
|
||||
* @len: the number of bytes to read. Use 0 to read entire file.
|
||||
* @actread: returns the actual number of bytes read
|
||||
* Return: 0 if OK with valid *actread, -1 on error conditions
|
||||
*/
|
||||
int fs_read(const char *filename, ulong addr, loff_t offset, loff_t len,
|
||||
loff_t *actread);
|
||||
|
||||
/*
|
||||
* fs_write - Write file to the partition previously set by fs_set_blk_dev()
|
||||
* Note that not all filesystem types support offset!=0.
|
||||
/**
|
||||
* fs_write() - write file to the partition previously set by fs_set_blk_dev()
|
||||
*
|
||||
* @filename: Name of file to read from
|
||||
* @addr: The address to read into
|
||||
* @offset: The offset in file to read from. Maybe 0 to write to start of file
|
||||
* @len: The number of bytes to write
|
||||
* @actwrite: Returns the actual number of bytes written
|
||||
* @return 0 if ok with valid *actwrite, -1 on error conditions
|
||||
* Note that not all filesystem drivers support offset != 0.
|
||||
*
|
||||
* @filename: full path of the file to write to
|
||||
* @addr: address of the buffer to read from
|
||||
* @offset: offset in the file from where to start writing
|
||||
* @len: the number of bytes to write
|
||||
* @actwrite: returns the actual number of bytes written
|
||||
* Return: 0 if OK with valid *actwrite, -1 on error conditions
|
||||
*/
|
||||
int fs_write(const char *filename, ulong addr, loff_t offset, loff_t len,
|
||||
loff_t *actwrite);
|
||||
|
|
|
|||
|
|
@ -359,7 +359,7 @@ config LZO
|
|||
This enables support for LZO compression algorithm.r
|
||||
|
||||
config GZIP
|
||||
bool "Enable gzip decompression support for SPL build"
|
||||
bool "Enable gzip decompression support"
|
||||
select ZLIB
|
||||
default y
|
||||
help
|
||||
|
|
|
|||
|
|
@ -16,7 +16,6 @@
|
|||
#include <efi_loader.h>
|
||||
#include <div64.h>
|
||||
#include <hexdump.h>
|
||||
#include <uuid.h>
|
||||
#include <stdarg.h>
|
||||
#include <linux/ctype.h>
|
||||
#include <linux/err.h>
|
||||
|
|
|
|||
|
|
@ -118,7 +118,6 @@ CONFIG_BMP_32BPP
|
|||
CONFIG_BOARDDIR
|
||||
CONFIG_BOARDNAME
|
||||
CONFIG_BOARDNAME_LOCAL
|
||||
CONFIG_BOARD_AXM
|
||||
CONFIG_BOARD_COMMON
|
||||
CONFIG_BOARD_ECC_SUPPORT
|
||||
CONFIG_BOARD_IS_OPENRD_BASE
|
||||
|
|
@ -128,7 +127,6 @@ CONFIG_BOARD_NAME
|
|||
CONFIG_BOARD_POSTCLK_INIT
|
||||
CONFIG_BOARD_REVISION_TAG
|
||||
CONFIG_BOARD_SIZE_LIMIT
|
||||
CONFIG_BOARD_TAURUS
|
||||
CONFIG_BOOGER
|
||||
CONFIG_BOOTBLOCK
|
||||
CONFIG_BOOTFILE
|
||||
|
|
|
|||
|
|
@ -272,6 +272,7 @@ subdir- += env
|
|||
|
||||
ifneq ($(CROSS_BUILD_TOOLS),)
|
||||
override HOSTCC = $(CC)
|
||||
override HOSTCFLAGS = $(CFLAGS)
|
||||
|
||||
quiet_cmd_crosstools_strip = STRIP $^
|
||||
cmd_crosstools_strip = $(STRIP) $^; touch $@
|
||||
|
|
|
|||
Loading…
Add table
Reference in a new issue