2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-14 23:33:00 +00:00
Commit graph

4096 commits

Author SHA1 Message Date
Simon Glass
25a5818ff8 common: Drop asm/ptrace.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:23 -04:00
Simon Glass
f7ae49fc4f common: Drop log.h from common header
Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:18 -04:00
Simon Glass
0914011310 command: Remove the cmd_tbl_t typedef
We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 18:36:55 -04:00
Simon Glass
691d719db7 common: Drop init.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 17:33:33 -04:00
Simon Glass
4d72caa5b9 common: Drop image.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 17:33:33 -04:00
Simon Glass
52f2423804 common: Drop bootstage.h from common header
Move this fairly uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 17:33:33 -04:00
Simon Glass
90526e9fba common: Drop net.h from common header
Move this header out of the common header. Network support is used in
quite a few places but it still does not warrant blanket inclusion.

Note that this net.h header itself has quite a lot in it. It could be
split into the driver-mode support, functions, structures, checksumming,
etc.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 17:33:31 -04:00
Simon Glass
c3dc39a2f8 arm: Don't include common.h in header files
It is bad practice to include common.h in other header files since it can
bring in any number of superfluous definitions. It implies that some C
files don't include it and thus may be missing CONFIG options that are set
up by that file. The C files should include these themselves.

Update some header files in arch/arm to drop this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 14:54:24 -04:00
Michael Walle
714497e327 efi_loader: round the memory area in efi_add_memory_map()
Virtually all callers of this function do the rounding on their own.
Some do it right, some don't. Instead of doing this in each caller,
do the rounding in efi_add_memory_map(). Change the size parameter
to bytes instead of pages and remove aligning and size calculation in
all callers.

There is no more need to make the original efi_add_memory_map() (which
takes pages as size) available outside the module. Thus rename it to
efi_add_memory_map_pg() and make it static to prevent further misuse
outside the module.

Signed-off-by: Michael Walle <michael@walle.cc>
Add missing comma in sunxi_display.c.
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-17 21:59:53 +02:00
Trevor Woerner
18138ab203 rename symbol: CONFIG_TEGRA -> CONFIG_ARCH_TEGRA
Have this symbol follow the pattern of all other such symbols.

Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2020-05-15 14:47:35 -04:00
Trevor Woerner
b48f72a86b arm: orion5x: finish moving SoC to mach-orion5x
The SPL linker script had been left in arch/$(ARCH)/cpu/$(CPU)/$(SOC);
therefore move it to the already-established arch/$(ARCH)/mach-$(SOC)
location.

Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2020-05-15 14:47:35 -04:00
Trevor Woerner
b3d9a8b185 arm: lpc32xx: move SoC to mach-lpc32xx
Following the example of most other SoCs in arch/$(ARCH)/cpu/$(CPU)/$(SOC)
move the lpc32xx code from arch/arm/cpu/arm926ejs/lpc32xx to
arch/arm/mach-lpc32xx.

Following the checklist from
commit 01f1445630 ("ARM: prepare for moving SoC sources into mach-*"):

    [1] move files from arch/arm/cpu/arm926ejs/lpc32xx to arch/arm/mach-lpx32xx
    [2] add machine entry to arch/arm/Makefile
    [3] remove "obj-y += ..." from arch/arm/cpu/arm926ejs/Makefile
    [4] fix the Kconfig file path in arch/arm/Kconfig
    [5] (no MAINTAINERS update)

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2020-05-15 14:47:35 -04:00
Peng Fan
6aead23323 imx: imx8qm/qxp: Recover SPL data section for partition reboot
When doing partition reboot, the boot image won't be reloaded by ROM,
it is just CPU reset to boot entry. The SW has to keep the boot image
inside the RAM unchanged. It includes both the TEXT section and DATA
section.

For SPL, the problem is DATA section will be updated at runtime, so in
next partition reboot the data is not same as the initial value from
cold boot. If any code depends on the initial value, then it will have
problem.

This patch introduces a mechanism to recover the data section
for partition reboot. It adds a new section in image for saving
data section. When from cold boot, the data section will be saved
to that new section at SPL early phase. When from partition reboot,
the data section will be restored from the new section.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Madalin Bucur
6eb32a03e0 driver: net: fm: add DM ETH support
Probe the FMan MACs based on the device tree while
retaining the legacy code/functionality.
One notable change introduced here is that, for DM_ETH,
the name of the interfaces is corrected to the fmX-macY
format, that avoids the referral to the MAC block names
which were incorrect for FMan v3 devices (i.e. DTSEC,
TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1).
The legacy code is left unchanged in this respect.

Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29 11:10:54 +05:30
Hou Zhiqiang
f40b120e93 fsl-layerscape: Move GIC RD tables init to soc.c
Move GIC redistributor tables initialization to CPU setup function.

This patch introduces a GIC redistributor tables init function, and
moves the function of reserving memory for GIC redistributor tables
to soc.c and adds a argument for the memory size to reserve, BTW
rename the function so that it is more readable.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Wasim Khan <wasim.khan@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28 17:46:46 +05:30
Hou Zhiqiang
0d5b0711e9 fsl-layerscape: Kconfig: Select RESV_RAM if GIC_V3_ITS
The GIC redistributor tables initialization depends on RESV_RAM config,
so select RESV_RAM if GIC_V3_ITS is enabled.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Wasim Khan <wasim.khan@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28 17:46:46 +05:30
Hou Zhiqiang
6ebd48835f fsl-layerscape: Add RESV_RAM check in resv_ram addr
The initialization of gd->arch.resv_ram pointer should depend on if the
RESV_RAM config is enabled.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Wasim Khan <wasim.khan@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28 17:46:46 +05:30
Florinel Iordache
5d3bcdb12f phy: add support for backplane kr mode
Add generic support for backplane kr modes currently available:
10gbase-kr, 40gbase-kr4. Remove platform generic fixups
(armv8/layerscape and powerpc) for ethernet interfaces specified
in device tree as supported backplane modes.

Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-20 13:35:11 +05:30
JC Kuo
d491dc09e4 t210: do not enable PLLE and UPHY PLL HW PWRSEQ
This commit removes the programming sequence that enables PLLE and UPHY
PLL hardware power sequencers. Per TRM, boot software should enable PLLE
and UPHY PLLs in software controlled power-on state and should power
down PLL before jumping into kernel or the next stage boot software.

Adds call to board_cleanup_before_linux to facilitate this.

Signed-off-by: JC Kuo <jckuo@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
2020-04-02 14:30:01 -07:00
Biwen Li
bb1165f900 dm: arm64: ls1046a: add i2c DM support
This supports i2c DM and enables CONFIG_DM_I2C
for SoC LS1046A

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30 08:12:13 +05:30
Biwen Li
fefac937fb dm: arm64: ls1043a: add i2c DM support
This supports i2c DM and enables CONFIG_DM_I2C
for SoC LS1043A

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30 08:12:13 +05:30
Tomasz Duszynski
3586cb8227 Revert "sunxi: psci: avoid error address-of-packed-member"
Using memcpy() for some MMIO access is generally frowned upon and might
break things on some platforms. Allwinner H3, which fails to boot, being
an example here.

Moreover, fields being accessed are naturally aligned and warnings
produced by GCC have been quiesced for some time already by:

53dc8ae ("gcc-9: silence 'address-of-packed-member' warning")

That said, it should be okay to revert this commit.

This reverts commit 9bd34a69a4.

Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com>
Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2020-03-18 15:37:08 +05:30
Biwen Li
a0affb367a dm: arm64: ls1012a: add i2c DM support
This supports i2c DM and enables CONFIG_DM_I2C
for SoC LS1012A

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-02-04 16:20:25 +05:30
Biwen Li
beadf4f28c armv8: fsl-layerscape: spl: fix build error when DM_I2C is enabled
Fix below SPL build error when DM_I2C is enabled,
- arch/arm/cpu/armv8/built-in.o: In function `board_init_f:
  arch/arm/cpu/armv8/fsl-layerscape/spl.c:74: undefined reference to `i2c_init_all'
  arch/arm/cpu/armv8/fsl-layerscape/spl.c:74:(.text.board_init_f+0x30):
  relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol
  `i2c_init_all'
  make[2]: *** [spl/u-boot-spl] Error 1
  make[1]: *** [spl/u-boot-spl] Error 2
  make: *** [sub-make] Error 2
  arch/arm/cpu/armv8/fsl-layerscape/spl.c: In function 'board_init_f':
  arch/arm/cpu/armv8/fsl-layerscape/spl.c:74:2: warning: implicit
  declaration of function 'i2c_init_all'; did you mean 'misc_init_r'?
  [-Wimplicit-function-declaration]`

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-02-04 16:20:25 +05:30
Alex Marginean
0d9d557de5 arch: armv8: fsl-layerscape: export serdes config to environment
Exports the serdes configuration as an environment variable for LS gen 3
SoCs, so it can be used in u-boot command line.  It should particularly
be useful for applying Linux DT overlays for the given serdes
configuration.
This code is called from arch_misc_init and not from the existing
serdes_init function because it depends on U-Boot environment being set
up.

Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-01-24 14:28:26 +05:30
Alex Marginean
430a5542f3 armv8: ls1028a_serdes: Add few missing serdes protocols
Add serdes protocol 0x7777, 0x9999, 0xb998, 0xbb56 to supported list.
These protocols are supported and functional but they trigger a warning
in U-Boot console at boot because they are not on this list.

Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-01-24 14:28:26 +05:30
Pramod Kumar
0b7435107b armv8: fsl-layerscape: LS1044A/1048A: enable Only 1x 10GE port
LS1088A has four personalities, LS1088A, LS1084A, LS1048A and LS1044A.
LS1044A, LS1048A are LS1088A personalities, which support only one
1x 10GE port.
MAC1 and MAC2 are associated with 1G SGMII, 2.5G SGMII, and XFI.
Disable MAC1 to have only one 1x 10GE port for LS1044A, LS1048A.

Signed-off-by: Pramod Kumar <pramod.kumar_1@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-01-24 14:28:26 +05:30
Masahiro Yamada
6ce26f8fd3 ARM: LS1021A: remove redundant "depends on ARCH_LS1021A"
These config entries are inside the menu block, which already
depends on ARCH_LS1021A:

  menu "LS102xA architecture"
          depends on ARCH_LS1021A

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-01-24 14:28:26 +05:30
Ran Wang
d085c9ad06 armv8: ls1012a: Make USB masters snoopable
Program register bit of SCFG_SNPCNFGCR_USBRDSNP and
SCFG_SNPCNFGCR_USBWRSNP to drive USB read/write
snoop signal on LS1012A.

Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-01-24 14:28:26 +05:30
Simon Glass
db41d65a97 common: Move hang() to the same header as panic()
At present panic() is in the vsprintf.h header file. That does not seem
like an obvious choice for hang(), even though it relates to panic(). So
let's put hang() in its own header.

Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Migrate a few more files]
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-17 17:53:40 -05:00
Simon Glass
9b4a205f45 common: Move RAM-sizing functions to init.h
These functions relate to memory init so move them into the init
header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17 14:02:35 -05:00
Simon Glass
9a3b4ceb37 common: Move reset_cpu() to the CPU header
Move this function out of common.h and into a relevant header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17 14:02:31 -05:00
Simon Glass
049f8d6f4a common: Move get_tbclk() to time.h
This function related to timer and most of the timer functions are in
time.h, so move this function there.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17 13:27:30 -05:00
Simon Glass
d96c26040e common: Move clock functions into a new file
These three clock functions don't use driver model and should be migrated.
In the meantime, create a new file to hold them.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17 13:27:29 -05:00
Yangbo Lu
f1bce08426 Drop CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK usage
The eSDHC reference clocks should be provided by speed.c in arch/.
And we do not need CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK option to
select which clock to use. Because we can make the driver to select
the periperhal clock which is better (provides higher frequency)
automatically if its value is provided by speed.c.

This patch is to drop this option and make driver to select clock
automatically. Also fix peripheral clock calculation issue in
fsl_lsch2_speed.c/fsl_lsch3_speed.c.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2020-01-16 13:20:33 +08:00
Giulio Benetti
e403316634 armv7m: cache: add mmu_set_region_dcache_behaviour() stub for compatibility
Since some driver requires this function add it as an empty stub
when DCACHE is OFF.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14 22:53:59 +01:00
Rajesh Ravi
41acbc53f4 arm: cpu: armv8: add support for arm psci reset2.
Current U-Boot has only support for psci reset.
Adding support for arm psci reset2 allows passing of reset level
and other platform sepcific parameters like strap settings
to lowlevel psci implementation.

Signed-off-by: Rajesh Ravi <rajesh.ravi@broadcom.com>
Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
2020-01-10 14:18:26 -05:00
Tom Rini
d8a3f5259a New for 2020.04
---------------
 
 - New boards
 	Embedded Artists COM board
 	Xea Board
 - Switch to DM:
 	Aristainetos boards
 	Toradex colibri (DM_ETH)
 	iCubox
 	GE bx50v3
 	mx7dsabre (DM_ETH)
 	cx9020
 - New features:
 	Bootaux with elf files
 	Default SYS_THUMB_BUILD for i.MX6/7
 - Fixes:
 	DHCOM i.MX6 PDK
 	Engicam
 	i.MX8M tools (imx8m_image)
 
 Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/633679664
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAl4UhxIPHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et3MZYMAMEttt0cNxBg0/zBjNuMSn3Bq1lpN+KKsY97
 Cme06wZQdlbdfHhXyKiVfky2vjrZa1nacUgqSQlJdzvsPQbg9TE/8zxTd13BNw6C
 Tn6IHS7godvz9Puf0HD8skoYBpVm/LQKmSEfcPAEGOSnHzZx/MrMU0Qze3PgqWu5
 0xbp8yBsyVw96/zBRZtbwXy4COuS1viFrbf82EgHAZUsmXpgvJB59i8rOewwWNR1
 TpyhPbHlq42X+0Qrwq0RGtUr+t4tI6czlxeReOBgb1/YqJGJ6rEqbGm90XROW3sA
 IeU5PY7LUk8OFRQtyfBSSYgFgFmgOYzfpXe9YSUoIxV55OvCad7ksaRctjPJnKqy
 CndINrG9JnV9T5N0LczAgVFXWT49ybPziyZRDHERDg1XosuHnNk7r0co05uacYUN
 ZFgB21mzQ8qGPAd1C3tMXG05ZA9cdRCmWxKxxF6z2/2FT15euZQ0obwAR1HsiJmZ
 wLbyPl1Hi7ZkwvTT/Wk3se0zGpNj2A==
 =vOZ+
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20200107' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

New for 2020.04
---------------

- New boards
	Embedded Artists COM board
	Xea Board
- Switch to DM:
	Aristainetos boards
	Toradex colibri (DM_ETH)
	iCubox
	GE bx50v3
	mx7dsabre (DM_ETH)
	cx9020
- New features:
	Bootaux with elf files
	Default SYS_THUMB_BUILD for i.MX6/7
- Fixes:
	DHCOM i.MX6 PDK
	Engicam
	i.MX8M tools (imx8m_image)

Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/633679664
2020-01-07 08:45:43 -05:00
Rasmus Villemoes
b6e7ef4bf7 ARM: mxs: spl_boot.c: make early_delay more robust
It's true that booting normally doesn't take long enough for the
register to roll (which actually happens in a little over an hour, not
just a few seconds). However, the counter starts at power-on, and if
the board is held in reset to be booted over USB, one actually risks
hitting wrap-around during boot, which can both result in too short
delays (if the "st += delay" calculation makes st small) and
theoretically also unbound delays (if st ends up being UINT_MAX and
one just misses sampling digctl_microseconds at that point).

It doesn't take more code to DTRT, and once bitten, twice shy.

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2020-01-07 10:26:57 +01:00
Rasmus Villemoes
abaf5c9804 arm: mxs: be more careful when enabling gpmi_clk
The data sheet says that the DIV field cannot change while the CLKGATE
bit is set or modified. So do it a little more carefully, by first
clearing the bit, waiting for that to appear, then setting the DIV
field.

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2020-01-07 10:26:57 +01:00
Rasmus Villemoes
fb94625229 arm: mxs: fix comments in arch_cpu_init to match the code
The comment says to clear the bypass bit, but in fact it sets it, thus
selecting ref_xtal. And the next line of code does not set the divider
to 12, but to (the reset value of) 1.

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2020-01-07 10:26:57 +01:00
Tom Rini
5a8fa095cb Merge branch 'next'
Bring in the following merges:

commit 8fbbec12f7
Merge: 87f69f467a 63618e71e8
Author: Tom Rini <trini@konsulko.com>
Date:   Fri Jan 3 09:48:47 2020 -0500

    Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq into next

    - updates and fixes on ls1028a, lx2, ls1046a, MC-DPSPARSER support

commit 87f69f467a
Merge: c0912f9bbf 4466b99703
Author: Tom Rini <trini@konsulko.com>
Date:   Tue Dec 24 08:18:19 2019 -0500

    Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xx into next

    - Enable DM driver on ppc/km boards
    - Enable DM_USB for some of NXP powerpc platforms: P5040, T4240, T208x,
      T104x, P4080, P2041, P2020, P1020, P3041
    - Some updates in mpc85xx-ddr driver, km boards

commit c0912f9bbf
Merge: 533c9f5714 a1d6dc3f84
Author: Tom Rini <trini@konsulko.com>
Date:   Wed Dec 18 07:20:19 2019 -0500

    Merge branch 'next' of https://gitlab.denx.de/u-boot/custodians/u-boot-x86 into next

    - Various x86 common codes updated for TPL/SPL
    - I2C designware driver updated for PCI
    - ICH SPI driver updated to support Apollo Lake
    - Add Intel FSP2 base support
    - Intel Apollo Lake platform specific drivers support
    - Add a new board Google Chromebook Coral

commit 533c9f5714
Merge: 553cb06887 033e18b47b
Author: Tom Rini <trini@konsulko.com>
Date:   Tue Dec 17 07:53:08 2019 -0500

    Merge tag '20191217-for-next' of https://gitlab.denx.de/u-boot/custodians/u-boot-i2c into next

    i2c: for next
    - misc: i2c_eeprom:
      Add partition support and add ability to query size
      of eeprom device and partitions
    - i2c common:
      add support for offset overflow in to address and add
      sandbox tests for it.

commit 553cb06887
Merge: f39abbbc53 b4f98b3b16
Author: Tom Rini <trini@konsulko.com>
Date:   Thu Dec 12 08:18:59 2019 -0500

    Merge tag 'dm-next-13dec19' of https://gitlab.denx.de/u-boot/custodians/u-boot-dm into next

    buildman improvements including toolchain environment feature
    sandbox unicode support in serial
2020-01-06 17:07:49 -05:00
Pankaj Bansal
ba7c966c0f pci: layerscape: move PCIE related CONFIG to PCI Kconfig
move the PCIE related config from arch Kconfig to PCI Kconfig.
As the PCI_LAYERSCAPE driver is being used in platform other than
fsl-layerscape platforms like ls102xa.

Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-01-02 14:36:57 +05:30
Kuldeep Singh
ce3bead608 fsl-lsch3: soc: Enable AHB read support for Flexspi controller
Enable AHB support for Flexspi controller interface meaning
memory can be accessed via md command using absolute addresses

Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com>
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Signed-off-by: Rajat Srivastava <rajat.srivastava@nxp.com>
Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-12-26 16:00:20 +05:30
Alex Marginean
3499dd033c ls1028a: Configure stream IDs for integrated PCI and fix up Linux DT
Hardware comes out of reset with implicit values, but these are outside
the accepted range for Layerscape gen 3 chassis spec used on LS1028A.
Allocate different IDs and fix up Linux DT to use them.

Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Michael Walle <michael@walle.cc>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-12-26 16:00:20 +05:30
Ran Wang
0cfa00cdb9 armv8: Add workaround for USB erratum A-050106
USB3.0 Receiver needs to enable fixed equalization
for each of PHY instances in an SOC. This is similar
to erratum A-009007, but this one is for LX2160A,
and the register value is different.

Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-12-26 16:00:20 +05:30
Michael Walle
055aa33ff9 armv8: layerscape: fix SPL multi DTB loading
Mark board_fit_config_name_match() as weak so a board can overwrite the
empty function.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-12-26 16:00:20 +05:30
Heinrich Schuchardt
9bd34a69a4 sunxi: psci: avoid error address-of-packed-member
Compiling with GCC 9.2.1 leads to build errors:

arch/arm/cpu/armv7/sunxi/psci.c: In function ‘sunxi_cpu_set_power’:
arch/arm/cpu/armv7/sunxi/psci.c:144:21: error: taking address of packed
member of ‘struct sunxi_cpucfg_reg’ may result in an unaligned pointer
value [-Werror=address-of-packed-member]
  144 |  sunxi_power_switch(&cpucfg->cpu1_pwr_clamp, &cpucfg->cpu1_pwroff,
      |                     ^~~~~~~~~~~~~~~~~~~~~~~
arch/arm/cpu/armv7/sunxi/psci.c:144:46: error: taking address of packed
member of ‘struct sunxi_cpucfg_reg’ may result in an unaligned pointer
value [-Werror=address-of-packed-member]
  144 |  sunxi_power_switch(&cpucfg->cpu1_pwr_clamp, &cpucfg->cpu1_pwroff,
      |                                              ^~~~~~~~~~~~~~~~~~~~

Use memcpy() and void* pointers to resolve the problem caused by packing
the struct sunxi_cpucfg_reg.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2019-12-18 20:13:34 +05:30
Thomas Hebb
9f67b56772 Fix typo in macros, "FIRMEWARE" -> "FIRMWARE"
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
2019-12-05 10:28:39 -05:00
Giulio Benetti
1b3d24b735 armv7m: cache: add invalidate_icache_all() stub
This commit:
d409c96216
causes build failure with ICACHE enabled. This is due to missing
invalidate_icache_all() stub. Let's add empty invalidate_icache_all() in
the case where ICACHE is not enabled.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2019-12-03 08:43:24 -05:00
Thomas Hebb
32f2ca2a7e cosmetic: Fix spelling and whitespace errors
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
2019-12-03 08:43:23 -05:00
Simon Glass
5255932f01 common: Move some board functions out of common.h
A number of board function belong in init.h with the others. Move them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02 18:25:21 -05:00
Simon Glass
36bf446b64 common: Move enable/disable_interrupts out of common.h
Move these two functions into the irq_funcs.h header file. Also move
interrupt_handler_t as this is used by the irq_install_handler() function.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02 18:25:01 -05:00
Simon Glass
9d3915b2df arm: powerpc: Tidy up code style for interrupt functions
Remove the unwanted space before the bracket.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02 18:24:59 -05:00
Simon Glass
1eb69ae498 common: Move ARM cache operations out of common.h
These functions are CPU-related and do not use driver model. Move them to
cpu_func.h

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02 18:24:58 -05:00
Simon Glass
9edefc2776 common: Move some cache and MMU functions out of common.h
These functions belong in cpu_func.h. Another option would be cache.h
but that code uses driver model and we have not moved these cache
functions to use driver model. Since they are CPU-related it seems
reasonable to put them here.

Move them over.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02 18:23:55 -05:00
Simon Glass
62270f4395 common: Move some SMP functions out of common.h
These functions belong in cpu_func.h so move them over.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02 18:23:14 -05:00
Simon Glass
b5981474f1 common: Move some CPU functions out of common.h
These functions belong in cpu_func.h since they do not use driver model.
Move them over. Don't bother adding comments since these functions should
be deleted.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02 18:23:13 -05:00
Simon Glass
68a6aa85ec common: Move mii_init() function out of common.h
This function belongs in mii.h so move it over.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02 18:23:13 -05:00
Simon Glass
1045315df0 common: Move get_ticks() function out of common.h
This function belongs in time.h so move it over and add a comment.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02 18:23:13 -05:00
Simon Glass
e3107d159c arm: pxa: Drop pxa_wait_ticks()
This function has a similar name to the common wait_ticks(). It is only
used in one place and seems small enough to drop.

Inline it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02 18:23:11 -05:00
Simon Glass
6887c5bed9 common: Move some time functions out of common.h
These functions belong in time.h so move them over and add comments.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02 18:23:11 -05:00
Simon Glass
b03e0510d7 common: Move serial functions out of common.h
These functions belong in serial.h so move them over.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02 18:23:11 -05:00
Simon Glass
2189d5f1e8 Move strtomhz() to vsprintf.h
At present this function sits in its own file but it does not really
justify it. There are similar string functions in vsprintf.h, so move it
there. Also add the missing function comment.

Use the vsprintf.h include file explicitly where needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02 18:23:09 -05:00
Simon Glass
62f9b65447 common: Move older CPU functions to their own header
These should be moved to driver model, but in the meantime, move them
out of the common header to help reduce its size.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02 18:23:06 -05:00
Yangbo Lu
d3eb317ea5 arm: drop eSDHC clock getting in mxc_get_clock() for layerscape
Although layerscape platforms reuse mxc_get_clock() of i.MX platforms,
eSDHC clock getting do not have to use it. It uses global data
gd->arch.sdhc_clk directly in fsl_esdhc driver. Even there are more
than one eSDHC controllers on SoC, they use same reference clock.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-27 16:55:56 +08:00
Tom Rini
a09fea1d28 env: Finish migration of common ENV options
- In ARMv8 NXP Layerscape platforms we also need to make use of
  CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
- On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
  to 0.
- Add Kconfig entry for ENV_ADDR.
- Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
- Add ENV_xxx_REDUND options that depend on their primary option and
  SYS_REDUNDAND_ENVIRONMENT
- On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
  for the pre-main-U-Boot environment location.
- On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
  rather it being non-zero, as it will now be zero by default.
- Rework the env_offset absolute in env/embedded.o to not use
  CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
  ENV_IS_IN_FLASH.
- Migrate all platforms.

Cc: Wolfgang Denk <wd@denx.de>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: uboot-stm32@st-md-mailman.stormreply.com
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-20 18:32:09 -05:00
Heinrich Schuchardt
d47a774680 arm: arm11: allow unaligned memory access
The UEFI spec mandates that unaligned memory access should be enabled if
supported by the CPU architecture.

This patch implements the function unaligned_access() to set the enable
unaligned data support flag and to clear the aligned flag in the system
control register (SCTLR). It is called when UEFI related commands like
bootefi are invoked.

Reported-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Tested-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Tested-by: Guillaume Gardet <Guillaume.Gardet@arm.com>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-11-19 12:10:22 +01:00
Udit Agarwal
5536c3c9d0 freescale/layerscape: Rename the config CONFIG_SECURE_BOOT name
Rename CONFIG_SECURE_BOOT to CONFIG_NXP_ESBC to avoid conflict
with UEFI secure boot.

Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-08 16:32:08 +05:30
Pankaj Bansal
812ff53c3e fsl-layerscape: fix warning if no hwconfig is defined
While getting the 'subarg' of 'hwconfig' env variable in
config_core_prefetch(), if no hwconfig variable is defined,
below warning is received:
WARNING: Calling __hwconfig without a buffer and
	before environment is ready

Fix this by checking 'hwconfig' env variable.
If not found return without further processing.

Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Tested-by: Michael Walle <michael@walle.cc>
2019-11-08 15:50:12 +05:30
Michael Walle
762ee522e2 armv8: fsl-layerscape: introduce fsl_board_late_init()
The fsl-layerscape already occupies board_late_init(), therefore it is
not possible for a board to have its own board_late_init(). Introduce
fsl_board_late_init() which can be implemented in the board specific
code.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-08 11:13:39 +05:30
Michael Walle
065ee175e0 armv8: fsl-lsch3: convert CONFIG_TARGET_x to CONFIG_ARCH_x
The clocks are not dependent on the target but only on the SoC.
Therefore, convert the CONFIG_TARGET_x macros to the corresponding
CONFIG_ARCH_x. This will allow other targets to automatically use the
common code. Otherwise every new target would have to add itself to the
"#if defined(CONFIG_TARGET_x) || .." macros.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-08 11:13:39 +05:30
Laurentiu Tudor
b4a59115e2 armv8: ls1028a: add erratum A-050382 workaround
Erratum A-050382 states that the eDMA ICID programmed in the eDMA_AMQR
register in DCFG is not correctly forwarded to the SMMU.
The workaround consists in programming the eDMA ICID in the eDMA_AMQR
register in DCFG to 40.

Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-08 11:13:38 +05:30
Laurentiu Tudor
30449aea50 armv8: lx2160a: add icid setup for platform devices
Add ICID setup for the platform devices contained on this chip: usb,
sata, sdhc, sec.

Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-08 11:13:38 +05:30
Laurentiu Tudor
e33938acc9 armv8: ls2088a: add icid setup for platform devices
Add ICID setup for the platform devices contained on this chip: usb,
sata, sdhc, sec.

Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-08 11:13:38 +05:30
Laurentiu Tudor
db49c1b2de armv8: fsl-layerscape: guard caam specific defines
These macros should only be used when CONFIG_FSL_CAAM is present.

Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-08 11:13:38 +05:30
Mathew McBride
28f9393b1a fsl-layerscape: do not use layerscape EFI reset if PSCI used
If the secure world reset handlers are used (via CONFIG_PSCI_RESET),
then do not use the layerscape-specific implementation.

Signed-off-by: Mathew McBride <matt@traverse.com.au>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-08 11:13:38 +05:30
Marek Vasut
b4a2cdc13e arm: mxs: Increase VDDD voltage to match specification
According to IMX28CEC rev. 4, 10/2018, Table 15. Recommended Operating
Conditions, page 16, the VDDD should be set to 1.55V when the CPU is
operating at 454MHz. This is the case in U-Boot, hence increase the
VDDD voltage. This fixes instability when performing TFTP transfers.
Increase the brownout threshold to 1.4V. The documentation recommends
1.45V setting for the brownout, however, this triggers failure during
power block init, so keep the brownout slightly lower.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-11-03 17:04:16 +01:00
Biwen Li
d20f184ce3 armv7: ls102xa: Don't power down OCRAM1 during deep sleep
To allow OCRAM to be used as wakeup source in
deep sleep, do not power it down.

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-10-21 15:34:18 +05:30
Biwen Li
1936841b11 armv7: ls102xa: add errata ID A-008646 for workaround
The patch adds an errata ID A-008646 for workaround
to provide more information by errata ID.

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-10-21 15:34:18 +05:30
Yuantian Tang
54d5c06cb9 armv8: ls1028a: disable multimedia for ls1027a, ls1017a
ls1028a has 4 personalities: ls1028a, ls1027a, ls1017a and ls1018a.
Both ls1027a and ls1017a personalities are lower functionality version
which doesn't support the multimedia subsystems, like LCD, GPU.

To disable multimedia feature on non-multimedia version,
set the status property to disabled in dts nodes.

Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-10-21 15:34:17 +05:30
Biwen Li
3f4bc67548 armv7: ls102xa: Correct endianness of SCFG_SPARECR8 read
The patch corrects endianness of register SCFG_SPARECR8 read
in_le32 -> in_be32

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-10-21 15:34:17 +05:30
Ran Wang
3d23b6c583 armv8: fsl-layerscape: Make USB masters snoopable
Program register bit of SCFG_SNPCNFGCR_USBxRDSNP and
SCFG_SNPCNFGCR_USBxWRSNP(x = 1, 2, 3) to drive USBx read/write
snoop signal on LS1043A and LS1046A.

Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-10-21 15:34:17 +05:30
Yuantian Tang
6ed6952383 armv8: ls1028a: Add more personalities support
Add LS1027A, LS1018A and LS1017A personalities support to
LS1028A SoC family.

LS1028A is the prime personality of LS1028A SoC family.
LS1027A is a lower funtionality version of QorIQ LS1028A
which does not support the multimedia subsystems, such as LCD
controller, GPU, and eDP PHY.

The QorIQ LS1018A and LS1017A SoCs are single 64-bit Arm A72
core, low power versions of the QorIQ LS1028A and LS1027A
SoCs respectively.

Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-10-21 15:34:17 +05:30
Tom Rini
eaa0bde051 u-boot-imx-20191009
-------------------
 
 Travis : https://travis-ci.org/sbabic/u-boot-imx/builds/595148532
 
 - MX6UL / ULZ
 - Toradex board
 - Allow to set OCRAM for MX6Q/D
 - MX7ULP
 - MX8: (container image, imx8mq_mek), SCU API
 - fix several board booting from SD/EMMC (cubox-i for example)
 - pico boards
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAl2dlTAPHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et3yfgL/1b4pKCwxswK42XkPpdHN1u/v2W/PVDanl/H
 EYxlluHVFH23bLTjLvrrgQjAnZD1VQhxWq3bwCMoJ8vb9tYQ3d9vq7XADQ0WVQV+
 EfhE33fVRPRT3rEdhDKWm+y1mL8YPvYEBnr9li7qU9n1VxiwONPXxMXMqoo9/lbM
 b6lJaG5KkuK8Ofx3cYFVQeAEdsFYIJ2aXtTqsqrV9o2sjruOuG3Ux+6Ov+9O0crY
 q8MXvW6kwWkVVNriVV7Yal0pomPZfMTqft007En9Mv2FtXqMeCWZ4Xh2LtRylR7n
 ruIbo94jkPuwuZ0p/6SeiyopoG/hU/skrkJv1s8W70DOsyaunP2BsveYXEjMV2Rb
 DomotcJit9Ws6P7rOP1oI8OvxSxVN8n6mo23UviZd8MjNAmOm49BtSxVGGB+pwmr
 ufGFG4MGQ5VpCxmzh6KrJCLXpI/mhKrkBkZy58cUbus7aPv3es/jBmmtGlU3m6ka
 NlEzHOX1hpJV/lhLvxjqRhVxuXvXOA==
 =+e3p
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20191009' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

u-boot-imx-20191009
-------------------

Travis : https://travis-ci.org/sbabic/u-boot-imx/builds/595148532

- MX6UL / ULZ
- Toradex board
- Allow to set OCRAM for MX6Q/D
- MX7ULP
- MX8: (container image, imx8mq_mek), SCU API
- fix several board booting from SD/EMMC (cubox-i for example)
- pico boards

[trini: display5 merged manually]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-09 11:44:45 -04:00
Tom Rini
8c05abad13 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvell
- Move WATCHDOG_TIMEOUT_MSECS to Kconfig (Heiko)
2019-10-08 18:45:49 -04:00
Peng Fan
cda789a5b1 spl: pass args to board_return_to_bootrom
Pass spl_image and bootdev to board_return_bootrom.
i.MX8MN needs the args to let ROM to load images

Cc: Simon Glass <sjg@chromium.org>
Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Cc: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-10-08 16:35:16 +02:00
Simon Glass
535e07846a arm: mxs: Correct CONFIG_SPL_NO_CPU_SUPPORT option
At present this is defined in Kconfig but there is a separate one in the
CONFIG whitelist. It looks like these are duplicates.

Rename the non-Kconfig one and remove it from the whitelist.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08 13:57:45 +08:00
Heiko Schocher
ca51ef7c0c watchdog: move WATCHDOG_TIMEOUT_MSECS to Kconfig
move WATCHDOG_TIMEOUT_MSECS to Kconfig and fix
all board defconfigs.

Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Stefan Roese <sr@denx.de>
Acked-by: Lukasz Majewski <lukma@denx.de>
Acked-by: Martyn Welch <martyn.welch@collabora.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2019-10-08 07:46:38 +02:00
Hou Zhiqiang
116f75c7b3 armv8: ls1028a: Updated serdes configuration for 0x13BB
In SerDes protocol 0x13BB, lane C was erroneously assigned
to PCIE1, this is now updated to PCIE2

Fixes: 36f50b7523 ("armv8: ls1028a: Add other serdes
		     protocal support")

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12 16:15:42 +05:30
Hou Zhiqiang
c9ba88bafc armv8: fsl-layerscape: Fix typo in Layerscape PCIe config entry
The correct config entry is CONFIG_PCIE_LAYERSCAPE and this
typo results in skipping the fixup of Linux PCIe DT nodes.

Also enable the fixup when Layerscape Gen4 controller driver
is enabled.

Fixes: 4da0e52c9d (armv8: fsl-layerscape: fix config dependency
		     for layerscape pci code)

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12 16:15:42 +05:30
Chuanhua Han
2f2a19757b armv8: fsl-layerscape: Update I2C clock divider
By default, i2c input clock is programmed at
platform clk / 2 in u-boot, but this is not
correct for all the platforms,
Update I2C clock divider's default values as per
SoC (LS1012A, LS1028A, LX2160A and LS1088A).

Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12 16:15:42 +05:30
Thomas Schaefer
0490cab584 armv8: ls1028a: configure PMU's PCTBENR to enable WDT
The SP805-WDT module on LS1028A requires configuration of PMU's
PCTBENR register to enable watchdog counter decrement and reset
signal generation. The watchdog clock needs to be enabled first.

Signed-off-by: Thomas Schaefer <thomas.schaefer@kontron.com>
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12 16:15:42 +05:30
Yinbo Zhu
24cb6f2295 fsl-layerscape: Add fsl_esdhc peripheral clock support
Add esdhc peripheral clock support
for NXP layerscape platforms: LS1046ARDB, LS1043ARDB,
LS1012ARDB, LS1028ARDB, LS1088ARDB, LX2160ARDB

Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12 14:00:35 +05:30
Florinel Iordache
1bad991205 drivers/fsl-mc: Create Kconfig file to manage driver specific configs better
Create drivers/net/fsl-mc/Kconfig and move fsl-mc specific configs
from arch/arm/cpu/armv8/fsl-layerscape/Kconfig to this new Kconfig

Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-09-04 11:37:19 -05:00
Laurentiu Tudor
b249fcba00 armv8: ls1028a: add icid setup for platform devices
Add ICID setup for the platform devices contained on this chip: usb,
sata, sdhc, edma, qdma, gpu, display and sec.

Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22 09:07:36 +05:30
Laurentiu Tudor
5c6dc6c9a9 armv8: ls1088a: add icid setup for platform devices
Add ICID setup for the platform devices contained on this chip: usb,
sata, sdhc, sec. The ICID macros for SEC needed to be adapted because
the format of the registers is different.

Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22 09:07:36 +05:30
Laurentiu Tudor
aef654a2ed armv8: fsl-layerscape: make icid setup endianness aware
The current implementation assumes that the registers holding the ICIDs
are universally big endian. That's no longer the case on newer
platforms so update the code to take into account the endianness of
each register.

Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22 09:07:36 +05:30
Chuanhua Han
71a2da3fa9 armv8: kconfig: Fix some platforms incorrect I2C clock divider
By default, i2c input clock is platform clk / 2, but some of the
platform of i2c clock divider does not meet this kind of circumstance,
so alone to set default values for these platforms.

Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22 09:07:36 +05:30
Chuanhua Han
67d3a815cb configs: ls1088a: Enable DM support for pcf2127 rtc
Enable related configs on all ls1088aqds boards to support pcf2127
rtc DM function.

Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22 09:07:36 +05:30
Chuanhua Han
292370df1c configs: ls2088a: Enable DM support for ds3231 rtc
Enable related configs on all ls2088aqds boards to support ds3231
rtc DM function.

Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22 09:07:36 +05:30
Chuanhua Han
21d5e964da configs: ls1028a: Enable DM support for pcf2127 rtc
Enable related configs on all ls1028aqds boards to support pcf2127
rtc DM function.

Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Reviewed-by: Alex Marginean <alexm.osslist@gmail.com>
Tested-by: Alex Marginean <alexm.osslist@gmail.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22 09:07:35 +05:30
Chuanhua Han
7abf9c16aa configs: lx2160: enable DM support for pcf2127 rtc
Enable related configs on all lx2160ardb boards to support pcf2127
rtc DM feature.

Also remove SYS_I2C_MXC_I2Cx, where x is from 1 to 8 from
Kconfig.

Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22 09:07:35 +05:30
Simon Glass
f3998fdc4d env: Rename environment.h to env_internal.h
This file contains lots of internal details about the environment. Most
code can include env.h instead, calling the functions there as needed.

Rename this file and add a comment at the top to indicate its internal
nature.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
[trini: Fixup apalis-tk1.c]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-11 19:27:31 -04:00
Simon Glass
e7dcf5645f env: Drop environment.h header file where not needed
This header file is now only used by files that access internal
environment features. Drop it from various places where it is not needed.

Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11 16:43:41 -04:00
Simon Glass
9fb625ce05 env: Move env_set() to env.h
Move env_set() over to the new header file.

Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11 16:43:41 -04:00
Simon Glass
4bfd1f5d62 env: Move env_init() to env.h
Move env_init() over to the new header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-11 16:43:41 -04:00
Simon Glass
3a7d55716d env: Move env_get_f() to env.h
Move this function over to the new header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-11 16:43:41 -04:00
Bin Meng
f588b4d205 arm: ls1021atwr: Convert to use driver model TSEC driver
Now that we have added driver model support to the TSEC driver,
convert ls1021atwr board to use it.

This depends on previous DM series for ls1021atwr:
http://patchwork.ozlabs.org/patch/561855/

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

[Vladimir] Made the following changes:
- Added 'status = "disabled";' for all Ethernet ports in ls1021a.dtsi
- Fixed the confusion between the SGMII/TBI PCS for enet0 and enet1 -
  a mistake ported over from Linux. Each SGMII PCS lies on the private
  MDIO bus of the interface (and the RGMII enet2 has no SGMII PCS).
- Added CONFIG_DM_ETH to all ls1021atwr_* defconfigs
- Completely removed non-DM_ETH support from ls1021atwr
- Changed "compatible" string from "fsl,tsec-mdio" to "fsl,etsec2-mdio"
  and from "fsl,tsec" to "fsl,etsec2" to match Linux
2019-07-25 13:13:31 -05:00
Patrick Delaunay
e21e3ffdd1 psci: Fix warnings when compiling with W=1
This patch solves the following warnings:
arch/arm/mach-stm32mp/psci.c:

warning: no previous prototype for ‘psci_set_state’ [-Wmissing-prototypes]
warning: no previous prototype for ‘psci_arch_cpu_entry’ [-Wmissing-prototypes]
warning: no previous prototype for ‘psci_features’ [-Wmissing-prototypes]
warning: no previous prototype for ‘psci_version’ [-Wmissing-prototypes]
warning: no previous prototype for ‘psci_affinity_info’ [-Wmissing-prototypes]
warning: no previous prototype for ‘psci_migrate_info_type’ [-Wmissing-prototypes]
warning: no previous prototype for ‘psci_cpu_on’ [-Wmissing-prototypes]
warning: no previous prototype for ‘psci_cpu_off’ [-Wmissing-prototypes]
warning: no previous prototype for ‘psci_system_reset’ [-Wmissing-prototypes]
warning: no previous prototype for ‘psci_system_off’ [-Wmissing-prototypes]

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-24 14:15:38 -04:00
AKASHI Takahiro
6324d50679 arm: move CONFIG_TFABOOT to generic Kconfig
Currently, CONFIG_TFABOOT is located in armv8/fsl-layerscape Kconfig,
but it will be also useful for other targets if some additional
configuration are necessary.
So move it to arch/arm/Kconfig.

Please note that CONFIG_TFABOOT still depends on
CONFIG_ARCH_SUPPORT_TFABOOT and so the menu won't come up
if any target doesn't need its own customization for TF-A boot.
This will maintain the compatibility.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Cc: York Sun <york.sun@nxp.com>
Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Cc: Priyanka Jain <priyanka.jain@nxp.com>
Cc: Sriram Dash <sriram.dash@nxp.com>
Cc: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Cc: Peng Ma <peng.ma@nxp.com>
Cc: Yuantian Tang <andy.tang@nxp.com>
Cc: Pankit Garg <pankit.garg@nxp.com>
2019-07-18 11:31:27 -04:00
Tom Rini
79b8d3c285 UniPhier SoC updates for v2019.10
- import DT updates from Linux
 
 - add UniPhier SPI controller driver
 
 - make U-Boot image for 64bit SoCs position independent
 
 - tidy up various init code for next generation SoCs
 
 - misc cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQJSBAABCgA8FiEEbmPs18K1szRHjPqEPYsBB53g2wYFAl0nREIeHHlhbWFkYS5t
 YXNhaGlyb0Bzb2Npb25leHQuY29tAAoJED2LAQed4NsG2GMP/2n8xlbLvYKVI5nF
 NP7yn6ZI04pEliuthMZEHxUwOXx7O8luk1NGIOOoTjMJUEO+QGsh9GXwNnhfzL2P
 mtI3Vq5ZZvwpHJPYK9JKze3Dn0apEoUWaqyj2J6s/r3FUmm/k7Y5J3QHLP4fpNG+
 m5cMwxrIPT8oefM/lnF45YDA0VY84SWfHfI39o1qKL+av0VIsN/uzYBwm4uOEyh+
 ZWY4CfL362w6EW03mrTA0RoJUyFmI6Jpcj/dAyU8E4+Fxlu3ZeN9rkUdd6FgVujU
 +JFA/rl/M1iMOAjrkrsknJgTgAEBOXW8zfnflsQS/LXWigC6NgxEXtHg3loAqZQH
 rK+bhWWSbHMkSp4ek0l7owKVhWhiv4TjmStjpVO85Hw0L5hd+La3yv9jRJjjz7Ac
 J3/ROJb/QXItjJr/GU5N6UpBeyWkQXEmueNEKRm3VyQSOjyedFINQ+2hnafCFgcO
 /bJBZUZoNKgj5fK2zUfM/FOsuMGHDb06u3cJfEnS1s5YnDEl2Hr8r/WhUUnYyQZg
 fZP+J/gyZCogrNy/2ijEyPj75b9MQOV9RnatvbirastJNia9hAXI/d3FUCRzVwlp
 5glb84AuiqmFbtCjQZ0kSI8dZI4hwY262ksAPR+yEawNQTU9Ay5uEcYxUq+oj11U
 OWZf9BiDvhCNmHAlX70vWF+M/oYE
 =X9wS
 -----END PGP SIGNATURE-----

Merge tag 'uniphier-v2019.10' of https://gitlab.denx.de/u-boot/custodians/u-boot-uniphier

UniPhier SoC updates for v2019.10

- import DT updates from Linux

- add UniPhier SPI controller driver

- make U-Boot image for 64bit SoCs position independent

- tidy up various init code for next generation SoCs

- misc cleanups
2019-07-11 18:08:44 -04:00
Miquel Raynal
2e8a720246 arm: spear: Return to BootROM if failing to boot from the main device
Overload the weak function board_boot_order() so that besides choosing
the main boot device, we can fallback on USB boot by returning in the
BootROM, eg. if the NOR flash is empty while it was the primary boot
medium.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2019-07-11 10:05:15 -04:00
Miquel Raynal
6d09581f78 arm: spear: Do not link the _main branch
The _main call is not supposed to return at all: don't link the
branch.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2019-07-11 10:05:15 -04:00
Miquel Raynal
f78fdee9fc arm: spear: Support returning to BootROM
Implement the weak board_return_to_bootrom() function so that when
enabling the spl_bootrom.c driver, one can make use of usbboot on
spear platforms. All necessary information to return to the BootROM
are stored in the BootROM's stack. The SPL stack pointer is reset so
we save the BootROM's stack pointer into the SPL .data section.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2019-07-11 10:05:15 -04:00
Miquel Raynal
6a9d0e275f arm: spear: Simplify start.S organization
There is no reason to do the few spear-related initialization, in a
different procedure than 'reset'. Spare one branching and get a linear
code flow by removing this indirection.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2019-07-11 10:05:15 -04:00
Miquel Raynal
08ad72ae81 arm: spear: Reference the link register with LR instead of R14
The link register is stored in R14. ARM assembly code allows to use
the 'lr' name to reference it instead of 'r14' which is not very
meaningful. Do the substitution to ease the reading.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2019-07-11 10:05:15 -04:00
Miquel Raynal
f30765b748 arm: spear: Use PUSH/POP mnemonics when relevant
Quoting ARM "RealView Compilation Tools Assembler Guide v4.0":

        PUSH and POP are synonyms for STMDB and LDM (or LDMIA), with
        the base register sp (r13), and the adjusted address written
        back to the base register.
	PUSH and POP are the preferred mnemonic in these cases.

Let's follow this recommandation to ease the reading and substitute
LDMIA/STMDB operations with PUSH/POP mnemonics.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2019-07-11 10:05:15 -04:00
Miquel Raynal
76bdaaa196 arm: spear: Purely cosmetic changes in start.S
Before cleaning a bit further the spear/start.S file, apply a few
cosmetic changes: capital letters, comment indentation and small
rewriting.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2019-07-11 10:05:15 -04:00
Miquel Raynal
10a5b3cd99 arm: spear: Fix the main comment in start.S
This comment describes the board state at the moment where we enter
the SPL. The description is entirely wrong; re-write it to fit the
reality.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2019-07-11 10:05:15 -04:00
Miquel Raynal
58cbb671ef arm: spear: Drop false comment
SPL BSS lies in SRAM and is actually initialized to 0 by the SPL in
arch/arm/lib/crt0.S:_main(), which is called by cpu_init_crit.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2019-07-11 10:05:15 -04:00
Miquel Raynal
68cadee6f2 arm: spear: Call the SPL 'SPL', not 'Xloader'
Rename Xloader as SPL in comments.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2019-07-11 10:05:15 -04:00
Miquel Raynal
aa13fa71ea arm: spear: Drop useless board_init_r call
It is clearly stated that board_init_f should *not* call
board_init_r. Indeed, board_init_f should return. The code will
continue through arch/arm/lib/crt0.S which will do more setup before
calling board_init_r.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2019-07-11 10:05:15 -04:00
Masahiro Yamada
382de4a7e9 arm64: add an option to switch visibility of CONFIG_SYS_INIT_SP_BSS_OFFSET
By default, CONFIG_SYS_INIT_SP_BSS_OFFSET was made invisible by not
giving a prompt to it.

The only way to define it is to hard-code an extra entry in SoC/board
Kconfig, like arch/arm/mach-tegra/tegra{186,210}/Kconfig.

Add a prompt to it in order to allow defconfig files to specify the
value of CONFIG_SYS_INIT_SP_BSS_OFFSET.

With this, CONFIG_SYS_INIT_SP_BSS_OFFSET would become always visible.
So, we need a new bool option to turn it off by default.

I move the 'default 524288' to the common place. This value is not too
big, but is big enough to avoid the overwrap of DT in most platforms.
If 512KB is not a suitable choice for your platform, you can change it
from your defconfig or menuconfig etc.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
2019-07-10 22:37:23 +09:00
Yangbo Lu
e37ac717d7 Convert to use fsl_esdhc_imx for i.MX platforms
Converted to use fsl_esdhc_imx for i.MX platforms.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Martyn Welch <martyn.welch@collabora.com>
Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
2019-06-23 14:18:34 +08:00
Mian Yousaf Kaukab
f2f83b2fd0 armv8: fix typo in LINUX_KERNEL_IMAGE_HEADER check
Fixes: 8163faf952 ARMv8: add optional Linux kernel image header

Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Andreas Färber <afaerber@suse.de>
2019-06-20 10:57:08 -04:00
Vabhav Sharma
d90c7ac7a9 armv8: ls1046afrwy: Add support for LS1046AFRWY platform
LS1046AFRWY board supports LS1046A family SoCs. This patch
add base support for this board.
Board support's 4GB ddr memory, i2c, micro-click module,microSD card,
serial console,qspi nor flash,ifc nand flash,qsgmii network interface,
usb 3.0 and serdes interface to support two x1gen3 pcie interface.

Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: Pankit Garg <pankit.garg@nxp.com>
Signed-off-by: Pramod Kumar <pramod.kumar_1@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19 12:54:57 +05:30
Yinbo Zhu
0dd74ec2df armv8: fsl-lsch2: add clock support for the second eSDHC
Layerscape began to use two eSDHC controllers, for example,
LS1012A. They are same IP block with same reference clock.
This patch is to add clock support for the second eSDHC.

Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19 12:54:57 +05:30
Maciej Pijanowski
c34d8dcb3e arm: fsl-layerscape: add 0x3040 serdes1 settings for LS1046A
Signed-off-by: Maciej Pijanowski <maciej.pijanowski@3mdeb.com>
Cc: piotr.krol@3mdeb.com
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19 12:54:57 +05:30
Maciej Pijanowski
73420f0220 arm: fsl-layerscape: fix 0x3363 serdes1 settings for ls1046a
As per LS1046A hardware manual, SGMII.9 and SGMII.10 present on
lane D and lane C respectively for 0x3363 protocol.

So fix serdes1 settings for ls1046a.

Signed-off-by: Maciej Pijanowski <maciej.pijanowski@3mdeb.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19 12:54:57 +05:30
Alex Marginean
4da0e52c9d armv8: fsl-layerscape: fix config dependency for layerscape pci code
Fixes a link error on layerscape platform, linking fails with CONFIG_PCI
set and CONFIG_PCI_LAYERSCAPE unset.

Signed-off-by: Alex Marginean <alexm.osslist@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19 12:54:57 +05:30
Pankit Garg
ab748801ef armv8: fsl-layerscape: Change bootcmd update logic
Change bootcmd update logic when CONFIG_ENV_ADDR is not defined

Signed-off-by: Pankit Garg <pankit.garg@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19 12:54:57 +05:30
Pankit Garg
293d75c0b1 armv8: fsl-layerscape: Update qspi clk cfg
Update qspi clock configuration in TFABOOT in case
of all boot sources except qspi boot source.

Signed-off-by: Pankit Garg <pankit.garg@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19 12:54:57 +05:30
Meenakshi Aggarwal
1dff14c87d armv8/fsl-layerscape: Add loop to check L3 dcache status
Flushing L3 cache may need variable time depending upon cache line
allocation.

Coming up with a proper timeout value would be best handled by
simulations under multiple scenarios in your actual system.
>From the purely HN-F point of view, the flush would take ~15 cycles for
a clean line, and ~22 cycles for a dirty line.  For the dirty line case,
there are many variables outside the HN-F that will increase the
duration per line.  For example, a *DBIDResp from the SN-F/SBSX,
memory controller latency, SN-F/SBSX RetryAck responses, CCN ring
congestion, CCN ring hops, etc, etc.  The worst-case timeout would
have to factor in all of these variables plus the HN-F cycles for
every line in the L3, and assuming all lines are dirty

In case if L3 is not flushed properly, system behaviour will be
erratic, so remove timeout and add loop to check status of L3 cache.

System will stuck in while loop if there is some issue in L3 cache
flushing.

Signed-off-by: Udit Kumar <udit.kumar@nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19 12:54:57 +05:30
Yangbo Lu
087bfe67ac armv8: fsl-lsch3: add clock support for the second eSDHC
Layerscape began to use two eSDHC controllers, for example,
LS1028A. They are same IP block with same reference clock.
This patch is to add clock support for the second eSDHC.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19 12:54:56 +05:30
Xiaowei Bao
36f50b7523 armv8: ls1028a: Add other serdes protocal support
Add other serdes protocal support.

Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19 12:54:56 +05:30
Yinbo Zhu
123fbbbe84 armv8: ls1028a: enable workaround for USB errarum A-009007
Rx Compliance tests may fail intermittently at high jitter
frequencies using default register values.

So program register USB_PHY_RX_OVRD_IN_HI in certain sequence
to make the Rx compliance test pass.

Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19 12:54:56 +05:30
Ran Wang
3458a4198c armv8: ls1028a: enable workaround for USB erratum A-008997
Enable workaround for USB erratum A-008997. Here PCSTXSWINGFULL
registers has been moved to DSCR as compared to other Layerscape SoCs
where it was in SCFG.

Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19 12:54:56 +05:30
Patrick Delaunay
c596877ee6 armv7: timer: init timer with bootstage
In initf_bootstage() we call bootstage_mark_name() which ends up calling
timer_get_us() before timer_init(); that cause crash for stm32mp1.

This patch solve the issue without changing the initialization sequence.
See also commit 97d20f69f5 ("Enable CONFIG_TIMER_EARLY with bootstage")
for other solution when DM is activated for TIMER.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-05-23 11:36:47 +02:00
Udit Agarwal
d9532e8092 armv8: fsl-layerscape: Set env_loc to ENVL_NOWHERE with CONFIG_ENV_IS_NOWHERE.
ENVL_NOWHERE is dependent on CONFIG_ENV_IS_NOWHERE and not on
CONFIG_CHAIN_OF_TRUST so return ENVL_NOWHERE when CONFIG_ENV_IS_NOWHERE
is enabled

Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-22 12:24:24 +05:30
Yuantian Tang
f278a21749 armv8: ls1028aqds: Add support of LS1028AQDS
LS1028AQDS Development System is a high-performance
computing, evaluation, and development platform that supports
LS1028A QorIQ Architecture processor.

Signed-off-by: Sudhanshu Gupta <sudhanshu.gupta@nxp.com>
Signed-off-by: Rai Harninder <harninder.rai@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
Signed-off-by: Tang yuantian <andy.tang@nxp.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-22 12:24:24 +05:30
Yuantian Tang
353f36d96e armv8: ls1028ardb: Add support for LS1028ARDB
LS1028A is an ARMv8 implementation. LS1028ARDB is an evaluation
platform that supports the LS1028A family SoCs. This patch add basic
support of the platform.

Signed-off-by: Sudhanshu Gupta <sudhanshu.gupta@nxp.com>
Signed-off-by: Rai Harninder <harninder.rai@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-22 12:24:24 +05:30
Yuantian Tang
d4ad111dc4 armv8: ls1028a: Add NXP LS1028A SoC support
Ls1028a SoC is based on Layerscape Chassis Generation 3.2
architecture with features:
 2 ARM v8 Cortex-A72 cores, CCI400, SEC, DDR3L/4, LCD, GPU, TSN
 ENETC, 2 USB 3.0, 2 eSDHC, 2 FlexCAN, 2 SPI, SATA, 8 I2C controllers,
 6 LPUARTs, GPIO, SAI, qDMA, eDMA, GIC, TMU etc.

Signed-off-by: Sudhanshu Gupta <sudhanshu.gupta@nxp.com>
Signed-off-by: Rai Harninder <harninder.rai@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-22 12:24:24 +05:30
Hou Zhiqiang
20eae4c810 kconfig: add dependency PCIE_LAYERSCAPE_GEN4 for FSL_PCIE_COMPAT
The LX2160A PCIe is using driver PCIE_LAYERSCAPE_GEN4 instead
of PCIE_LAYERSCAPE.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-22 12:24:24 +05:30
Hou Zhiqiang
059d942283 armv8: lx2160a: add MMU table entries for PCIe
The lx2160a have up to 6 PCIe controllers and have different
address and size of PCIe region.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-22 12:24:24 +05:30
Hou Zhiqiang
8348e79865 armv8: layerscape: use PCIe address macro for precompile PCIe MMU entry
Change to use PCIe address macro to determine if precompile the PCIe
MMU table entry.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-22 12:24:24 +05:30
Trevor Woerner
1001502545 CONFIG_SPL_SYS_[DI]CACHE_OFF: add
While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-05-18 08:15:35 -04:00
Trevor Woerner
b7b4af0e35 CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case
According to De Morgan's Law[1]:
	!(A && B) = !A || !B
	!(A || B) = !A && !B

There are 5 places in the code where we find:
	#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
	#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
	!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
	"is the [DI]CACHE on?"
and the construct:
	defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
	"is the [DI]CACHE off?"

Therefore
	!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
	"the opposite of 'are they both off?'"
in other words:
	"are either or both on?"
and:
	(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
	"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
2019-05-18 08:15:34 -04:00
Kever Yang
dc23c27aa5 arm: remove ARCH_ROCKCHIP macro in common code
This is fix to:
e2a12f590d rockchip: use 'arch-rockchip' as header file path

The V2 of origin patch set has fix this, but we merge V1 by
mistake, so lets correct it.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-08 17:34:12 +08:00
Simon Goldschmidt
1b1d8c19f5 spl: fix linker size check off-by-one errors
This fixes SPL linker script size checks for 3 lds files where the size
checks were implemented as "x < YYY_MAX_SIZE".

Fix the size checks to be "x <= YYY_MAX_SIZE" instead.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-05-05 08:48:50 -04:00
Vignesh Raghavendra
add4967124 arch: armv8: Provide a way to disable cache maintenance ops
On AM654 SoC(arm64) which is IO coherent and has L3 Cache, cache
maintenance operations being done to support non-coherent platforms
causes issues.

For example, here is how U-Boot prepares/handles a buffer to receive
data from a device (DMA Write). This may vary slightly depending on the
driver framework:

	Start DMA to write to destination buffer
	Wait for DMA to be done (dma_receive()/dma_memcpy())
	Invalidate destination buffer (invalidate_dcache_range())
	Read from destination buffer

The invalidate after the DMA is needed in order to read latest data from
memory that’s updated by DMA write. Also, in case random prefetch has
pulled in buffer data during the “wait for DMA” before the DMA has
written to it. This works well for non-coherent architectures.

In case of coherent architecture with L3 cache, DMA write would directly
update L3 cache contents (assuming cacheline is present in L3) without
updating the DDR memory. So invalidate after “wait for DMA” in above
sequence would discard latest data and read will cause stale data to be
fetched from DDR. Therefore invalidate after “wait for DMA” is not
always correct on coherent architecture.

Therefore, provide a Kconfig option to disable cache maintenance ops on
coherent architectures. This has added benefit of improving the
performance of DMA transfers as we no longer need to invalidate/flush
individual cache lines(especially for buffer thats several KBs in size).

In order to facilitate use of same Kconfig across different
architecture, I have added the symbol to top level arch/Kconfig file.
Patch currently disables cache maintenance ops for arm64 only.
flush_dcache_all() and invalidate_dcache_all() are exclusively used
during enabling/disabling dcache and hence are not disabled.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-05-05 08:48:50 -04:00
Kever Yang
6916dad511 rockchip: arm: use 'arch-rockchip' for common header
rockchip platform header file is in 'arch-rockchip'
instead of arch-$(SOC) for all SoCs.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-05-01 00:00:05 +02:00
Gregory CLEMENT
c8aac24629 arm: lpc32xx: Fix timer initialization
The match controller register is not cleared during
initialization. However, some bits of this register may reset the TC if
tnMRx match it.

As we can't make any assumption about how U-Boot is launched by the first
stage bootloader (such as S1L) clearing this register ensure that the
timers work as expected.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2019-04-26 18:58:20 -04:00
Lars Povlsen
25c07c72fd ARMv8: PSCI: Fix PSCI_TABLE relocation issue
This fixes relaction isses with the PSCI_TABLE entries in
the psci_32_table and psci_64_table.

When using 32-bit adress pointers relocation was not being applied to
the tables, causing PSCI handlers to point to the un-relocated code
area. By using 64-bit data relocation is properly applied. The
handlers are thus in the "secure data" area, which is protected by
/memreserve/ in the FDT.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
2019-04-23 17:57:28 -04:00
Ibai Erkiaga
1721b82c1f arm: fix hvc call
HVC call makes use of 6 mandatory arguments rather than 7 in the same way
as SMC calls. The 7th argument is optional (Client ID) for both HVC and
SMC but is implemented as 16-bit parameter and register R7 or W7. The aim
of this patch is just fix compilation error due to an invalid asm code in
the HVC call so that's why the 7th argument is removed.

The issue does not report any error in a normal build as hvc_call is not
used at all and is optimized by the compiler. Using -O0 triggers the
error so the patch is intended to fix issues on a ongoing effor to build
U-Boot with -O0.

Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com>
2019-04-22 18:13:22 -04:00
Ang, Chee Hong
fd50eac910 ARMv8: Disable fwcall when PSCI is enabled
When PSCI is enabled, we are expecting U-Boot which now act
as EL3 software will handle all the PSCI calls. We won't need
fwcall as no further HVC or SMC are needed.

Signed-off-by: Ang, Chee Hong <chee.hong.ang@intel.com>
2019-04-22 18:13:21 -04:00
Chee Hong Ang
f6b0115a96 ARMv8: Allow SiP service extensions on top of PSCI code
Allow PSCI layer to handle any SiP service functions added by
platform vendors. PSCI layer will look for SiP service function
in the SiP function table located in '._secure_svc_tbl_entries'
section if the SMC function identifier is not found in the PSCI
standard functions table. Use DECLARE_SECURE_SVC macro to declare
and add platform specific SiP service function.
This new section '._secure_svc_tbl_entries' is located next to
'._secure.text' section. Refer to arch/arm/cpu/armv8/u-boot.lds.

Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com>
2019-04-22 18:13:21 -04:00
Lukasz Majewski
e5b345f30c pcm052: bk4: sdcard: Add support for SD card booting/recovery
This code allows reusing the default u-boot as in the late board init, the
default envs are restored and proper recovery scripts executed.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-13 20:30:08 +02:00
Lukasz Majewski
a01cc0ac62 vybrid: Define the imx_get_mac_from_fuse() as a __weak function
The proposed way of reading fused MAC in the imx_get_mac_from_fuse() may
be different for other boards.

This commit defines the imx_get_mac_from_fuse() as a weak function to allow
board file overriding it with customized function.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-13 20:30:08 +02:00
Lukasz Majewski
7db8b854d3 vybrid: clock: Provide enable_i2c_clk() function for Vybrid
Provide function to enable I2C clocks for vf610 - in the generic code.
This function overrides the default weak function implementation (which
only returns 1).

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13 20:30:08 +02:00
Alexander Graf
ef331e3685 armv8: Disable exception vectors in SPL by default
Commit 1416e2d225 ("armv8: make SPL exception vectors optional") had a
typo in it which effectively disabled exception handling in SPL code always.

Since nobody complained, I guess we may as well disable exception handling
in SPL always by default.

So fix the bug to make the config option effective, but disable exception
handling in SPL by default. This gets us to the same functionality as before
by default, but with much less code included in the binary.

Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
2019-03-22 12:15:03 -04:00
Alison Wang
158097052a armv7: ls102xa: Add workaround for DDR erratum A-008850
Barrier transactions from CCI400 need to be disabled till
the DDR is configured, otherwise it may lead to system hang.
The patch adds workaround to fix the erratum.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com>
Signed-off-by: Alison Wang <alison.wang@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-15 11:52:01 +05:30
Laurentiu Tudor
e82d9ee73a armv8: fsl-layerscape: fix SEC QI ICID setup
The SEC QI ICID setup in the QIIC_LS register is actually an offset
that is being added to the ICID coming from the qman portal. Setting
it with a non-zero value breaks SMMU setup as the resulting ICID is
not known. On top of that, the SEC QI ICID must match the qman portal
ICIDs in order to share the isolation context.

Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Reviewed-by: Bharat Bhushan <bharat.bhushan@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-03 22:01:09 +05:30
Peng Ma
f11e492aea armv8: ls1043a: move SCSI_AHCI and SCSI to arm/Kconfig
remove SCSI and SCSI_AHCI configs for ls1043ardb due to no sata interface
support.
this changed is to fixed the ls1043ardb compile warning as fallows:

===================== WARNING ======================
This board does not use CONFIG_DM_SCSI. Please update
the storage controller to use CONFIG_DM_SCSI before the
v2019.07 release. Failure to update by the deadline may
result in board removal.See doc/driver-model/MIGRATION.txt
for more info.
====================================================

Signed-off-by: Peng Ma <peng.ma@nxp.com>
[PK: reword the patch subject]
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-19 10:26:44 +05:30
Rajesh Bhagat
5c08d96f3a armv8: layerscape: move CONFIG_LAYERSCAPE to Kconfig
Moves CONFIG_LAYERSCAPE for all NXP Layerscape platforms.

Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-19 10:26:44 +05:30
Rajesh Bhagat
bbf5b25282 armv8: layerscape: move TZASC and TZPC configs to Kconfig
Moves FSL_TZASC_400 and FSL_TZPC_BP147 configs to Kconfig
for LS1088A and LS2088A platforms.

Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-19 10:26:44 +05:30
Pankaj Bansal
1eba723c72 lx2160aqds : Add support for LX2160AQDS platform
LX2160AQDS is a development board that supports LX2160A
family SoCs. This patch add base support for this board.

Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com>
[PK: Sqaush patch for "secure boot defconfig" & add maintainer]
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-19 10:26:44 +05:30
Meenakshi Aggarwal
e088e587ed armv8: emc2305: add support for fan controller
Add support for fan controller emc2305.

Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-19 10:26:43 +05:30
Priyanka Jain
58c3e62040 armv8: lx2160ardb : Add support for LX2160ARDB platform
LX2160ARDB is an evaluation board that supports LX2160A
family SoCs. This patch add base support for this board.

Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com>
Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Signed-off-by: Pankit Garg <pankit.garg@nxp.com>
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Signed-off-by: Peng Ma <peng.ma@nxp.com>
Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
[PK: Sqaush patches from Yinbo Zhu, Peng Ma, Chuanhua Han
and re-arrange defconfig]
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-19 10:26:43 +05:30
Pankaj Bansal
2e53759dc6 armv8: fsl-layerscape: reorder rgmii dpmacs' enablement
some dpmacs in armv8a based freescale layerscape SOCs can be
configured via both serdes(sgmii, xfi, xlaui etc) bits and via
EC*_PMUX(rgmii) bits in RCW.
e.g. dpmac 17 and 18 in LX2160A can be configured as SGMII from
serdes bits and as RGMII via EC1_PMUX/EC2_PMUX bits
Now if a dpmac is enabled by serdes bits then it takes precedence
over EC*_PMUX bits. i.e. in LX2160A if we select serdes protocol
that configures dpmac17 as SGMII and set the EC1_PMUX as RGMII,
then the dpmac is SGMII and not RGMII.

Therefore, move the fsl_rgmii_init after fsl_serdes_init. in
fsl_rgmii_init function of SOC, we will check if the dpmac is enabled
or not? if it is (fsl_serdes_init has already enabled the dpmac), then
don't enable it.

Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-19 10:26:43 +05:30
Priyanka Jain
8c4875395b armv8, lx2160a: Initialize ethernet array in serdes_init
Add code to initial ethernet interface arrays
with corresponding dpmac-id values in serdes_init function
for LX2160A.

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-19 10:26:43 +05:30
Alexander Graf
2f8ab1218f arm: Leave smccc calls in .text when efi_loader=n
Commit 81ea00838c ("efi_loader: PSCI reset and shutdown") put the SMCCC
assembly code into the efi specific code section. This is wrong when we
do not have EFI_LOADER enabled, as that strips efi runtime sections from
the output binary

Reported-by: Michal Simek <monstr@monstr.eu>
Reported-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Tested-by: Michal Simek <monstr@monstr.eu>
Fixes: 81ea00838c ("efi_loader: PSCI reset and shutdown")
Signed-off-by: Alexander Graf <agraf@suse.de>
2019-02-13 09:40:06 +01:00
Heinrich Schuchardt
f6c6df7ebc efi_loader: refactor switch to non-secure mode
Refactor the switch from supervisor to hypervisor to a new function called
at the beginning of do_bootefi().

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2019-02-13 09:40:06 +01:00
Tom Rini
2f41ade79e linker: Modify linker scripts to be more generic
Make use of "IMAGE_MAX_SIZE" and "IMAGE_TEXT_BASE" rather than
CONFIG_SPL_MAX_SIZE and CONFIG_SPL_TEXT_BASE.  This lets us re-use the
same script for both SPL and TPL.  Add logic to scripts/Makefile.spl to
pass in the right value when preprocessing the script.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Jagan Teki <jagan@openedev.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Andreas Bießmann <andreas@biessmann.org>
Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: York Sun <york.sun@nxp.com>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Adam Ford <aford173@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Tested-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Tested-by: Adam Ford <aford173@gmail.com> #da850evm & omap3_logic_somlv
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-01-26 22:55:53 -05:00
Michal Simek
274ccb5b11 arm64: zynqmp: Move SoC sources to mach-zynqmp
Similar changes was done for Zynq in past and this patch just follow
this pattern to separate cpu code from SoC code.

Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/*
And also fix references to these files.

Based on
"ARM: zynq: move SoC sources to mach-zynq"
(sha1: 0107f24036)

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24 10:03:44 +01:00
Michal Simek
f11d4ab0b3 arm64: zynqmp: Do not protect zynqmp_pmufw_version()
There is hard dependency for CLK_ZYNQMP to have zynqmp_pmufw_version()
but also FPGA code is calling this function which is possible to use
without actual CLK_ZYNQMP firmware driver to be enabled.
This patch enables the case where only fixed-clock CLK setup is used.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24 10:03:42 +01:00
Hou Zhiqiang
5b994e85a5 armv8: ls1043a: correct the PCIe INTx fixup
On LS1043A rev1.0 there are 4 interrupt pins for INTx, and on
rev1.1 there is only 1 for INTx, so the current fixup is inverse
of the fact.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2019-01-17 13:16:44 -08:00
Hou Zhiqiang
ec88ff80ff armv8: ls1043a: add SVR definitions for 23x23 package silicon
LS1043A/LS1023A 23x23 package silicon has different SVR:VAR_PER.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2019-01-17 13:16:40 -08:00
Rajesh Bhagat
9570df03ee armv8: ls2088ardb: Add TFABOOT support
TFABOOT support includes:
  - ls2088ardb_tfa_defconfig to be loaded by trusted firmware
  - environment address and size changes for TFABOOT
  - define BOOTCOMMAND for TFABOOT
  - remove EL3 specific erratas for TFABOOT

Signed-off-by: Pankit Garg <pankit.garg@nxp.com>
Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2019-01-17 13:16:22 -08:00
Pankit Garg
143af3c6d5 armv8: ls1088ardb: Add TFABOOT support
TFABOOT support includes:
- ls1088ardb_tfa_defconfig to be loaded by trusted firmware
- environment address and size changes for TFABOOT
- MC address changes for TFABOOT
- define BOOTCOMMAND for TFABOOT
- ifc chip select changes for TFABOOT

Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Signed-off-by: Pankit Garg <pankit.garg@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2019-01-17 13:16:04 -08:00
Rajesh Bhagat
d23da2ae21 armv8: fsl-layerscape: fixes for TFABOOT framework
Fixes for TFABOOT framework
- update eMMC bootsrc to SD_MMC
- Increase buffer size for mcinitcmd from 256 to 512
- Fix mcinitcmd and bootcmd for Secure Boot

Signed-off-by: Pankit Garg <pankit.garg@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2019-01-17 13:15:25 -08:00
Xiaoliang Yang
da4918acb8 watchdog: imx: add config to disable wdog reset
Add Kconfig option WATCHDOG_RESET_DISABLE to disable watchdog reset
in imx_watchdog driver, so that the watchdog will not be fed in
u-boot if CONFIG_WATCHDOG_RESET_DISABLE is enabled.

Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
2019-01-01 14:12:18 +01:00
Xiaoliang Yang
005c1cf888 watchdog: driver support for fsl-lsch2
Support watchdog driver for fsl-lsch2. It's disabled in default.
If you want to use it, please enable CONFIG_IMX_WATCHDOG.
Define CONFIG_WATCHDOG_TIMEOUT_MSECS to set watchdog timeout.

Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
2019-01-01 14:12:18 +01:00
Priyanka Jain
4909b89ec7 armv8: lx2160a: Add LX2160A SoC Support
LX2160A Soc is based on Layerscape Chassis Generation 3.2
architecture with features:
 16 ARM v8 Cortex-A72 cores in 8 cluster, CCN508, SEC,
 2 64-bit DDR4 memory controller, RGMII, 8 I2C controllers,
 3 serdes modules, USB 3.0, SATA, 4 PL011 SBSA UARTs,
 4 TZASC instances, etc.

SoC personalites:
LX2120A is SoC with Twelve 64-bit ARM v8 Cortex-A72 CPUs
LX2080A is SoC with Eight 64-bit ARM v8 Cortex-A72 CPUs

Signed-off-by: Bao Xiaowei <xiaowei.bao@nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com>
Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-12-06 14:37:19 -08:00
Priyanka Jain
d6fdec211f armv8:fsl-layerscape: Add support for Chassis 3.2
NXP layerscape architecture Chassis 3.2 builds upon chassis3
architecture with changes like DDR Memory map change,
removal of IFC and support of upto 8 I2C controller.

Patch add README.lsch3_2 and the above changes under
macro CONFIG_NXP_LSCH3_2.

Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-12-06 14:37:19 -08:00
Priyanka Jain
6252faa0da armv8: lsch3: Add support of serdes3 module
Some lsch3 based SoCs like lx2160a contains three
serdes modules.
Add support for third serdes protocol in lsch3

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-12-06 14:37:19 -08:00
Pankit Garg
ade32bb473 armv8: fsl-layerscape: add support of MC framework for TFA
Add support of MC framework for TFA
Make MC framework independent of boot source.

Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Signed-off-by: Pankit Garg <pankit.garg@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-12-06 14:37:19 -08:00
Pankit Garg
2e17cb8a42 armv8: sec_firmware: return job ring status as true in TFABOOT
Returns job ring status as true in TFABOOT, as one job ring is always
reserved.

Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: Pankit Garg <pankit.garg@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-12-06 14:37:19 -08:00
Rajesh Bhagat
339fb297d4 armv8: sec_firmware: change el2_to_aarch32 SMC ID
Changes the el2_to_aarch32 SMC ID from 0xc000ff04 to 0xc200ff17,
it is applicable to both TFA and non-TFA boot.

Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-12-06 14:37:19 -08:00
York Sun
56db948b85 armv8: fsl-layerscape: Update parsing boot source
Workaround of erratum A010539 clears the RCW source field in PORSR1
register, causing failure of detecting boot source using this method.
Use SMC call if U-Boot runs at EL2. If SMC is not implemented or
running at EL3, continue to read PORSR1 and presume QSPI as boot
source if erratum workaround A010539 is enabled and RCW source is
cleared.

Signed-off-by: York Sun <york.sun@nxp.com>
2018-12-06 14:37:19 -08:00
Rajesh Bhagat
5a73ec6169 armv8: layerscape: skip OCRAM init for TFABOOT
OCRAM initialization is performed by TFA, Hence
skipped from u-boot.

Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-12-06 14:37:19 -08:00
Rajesh Bhagat
681d489e62 armv8: layerscape: add SMC calls for DDR size and bank info
Adds SMC calls for getting DDR size and bank info for TFABOOT.

Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Signed-off-by: Pankit Garg <pankit.garg@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-12-06 14:37:19 -08:00
Pankit Garg
2141d250f5 armv8: fsl-layerscape: bootcmd identification for TFABOOT
Adds bootcmd identificaton on basis on boot source, valid
in TFABOOT configuration.

Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Signed-off-by: Pankit Garg <pankit.garg@nxp.com>
[YS: remove unnecessary braces]
Reviewed-by: York Sun <york.sun@nxp.com>
2018-12-06 14:37:36 -08:00
Rajesh Bhagat
b6c97f4d94 armv8: layerscape: remove EL3 specific erratas for TFABOOT
Removes EL3 specific erratas for TFABOOT, And now taken care in TFA.

ARM_ERRATA_855873, SYS_FSL_ERRATUM_A008850, SYS_FSL_ERRATUM_A008511,
SYS_FSL_ERRATUM_A008336, SYS_FSL_ERRATUM_A009663,
SYS_FSL_ERRATUM_A009803, SYS_FSL_ERRATUM_A009942,
SYS_FSL_ERRATUM_A010165

Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-12-06 14:37:19 -08:00
Rajesh Bhagat
4c41738462 armv8: fsl-layerscape: identify boot source from PORSR register
PORSR register holds the cfg_rcw_src field which can be used
to identify boot source.

Further, it can be used to select the environment location.

Signed-off-by: Pankit Garg <pankit.garg@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
[YS: fix multiple checkpatch issues]
Reviewed-by: York Sun <york.sun@nxp.com>
2018-12-06 14:37:26 -08:00
Rajesh Bhagat
535d76a121 armv8: layerscape: Add TFABOOT support
Adds TFABOOT support config option and add generic code to enable
execution from DDR.

Signed-off-by: York Sun <york.sun@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
2018-12-06 14:37:19 -08:00
Pankit Garg
e350648046 armv8: fsl-layerscape: change tlb base from OCRAM to DDR in EL < 3
Change tlb base address from OCRAM to DDR when exception level is
less than 3.

Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: Pankit Garg <pankit.garg@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-12-06 14:37:19 -08:00
York Sun
bb50569dc4 armv8: layerscape: Enable routing SError exception
In case SError happens at EL2, if SCR_EL3[EA] is not routing it to
EL3, and SCR_EL3[RW] is set to aarch64, setting HCR_EL2[AMO] routes
the exception to EL2. Otherwise this exception is not taken.

Signed-off-by: York Sun <york.sun@nxp.com>
2018-12-06 14:37:19 -08:00
York Sun
d171c70716 move data structure out of cpu.h
Move static definitions to cpu.c file, as it doesn't allow
the cpu.h file to be included in multiple c files.

Signed-off-by: York Sun <york.sun@nxp.com>
2018-12-04 08:30:23 -08:00
Heinrich Schuchardt
81ea00838c efi_loader: PSCI reset and shutdown
When an operating system started via bootefi tries to reset or power off
this is done by calling the EFI runtime ResetSystem(). On most ARMv8 system
the actual reset relies on PSCI. Depending on whether the PSCI firmware
resides the hypervisor (EL2) or in the secure monitor (EL3) either an HVC
or an SMC command has to be issued.

The current implementation always uses SMC. This results in crashes on
systems where the PSCI firmware is implemented in the hypervisor, e.g.
qemu-arm64_defconfig.

The logic to decide which call is needed based on the device tree is
already implemented in the PSCI firmware driver. During the EFI runtime
the device driver model is not available. But we can minimize code
duplication by merging the EFI runtime reset and poweroff code with
the PSCI firmware driver.

As the same HVC/SMC problem is also evident for the ARMv8 do_poweroff
and reset_misc routines let's move them into the same code module.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Tested-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-12-02 21:59:37 +01:00
Andrew F. Davis
a0106c82d6 ARM: armv7: Add early stack for erratum workarounds
Some erratum workarounds call into C code before the stack
is setup, this can lead to values pushed onto the stack
being lost, firewall exceptions, and other undefined behavior.

Setup a temporary stack to allow these functions to work
correctly.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: Andreas Dannenberg <dannenberg@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
2018-11-26 22:52:12 -05:00
Chee Hong Ang
eb13dddd2c ARMv8: SError exception handling in PSCI exception vectors
Allow platform vendors to handle SError interrupt exceptions from
ARMv8 PSCI exception vectors by overriding this weak function
'plat_error_handler'.

Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com>
2018-11-16 13:34:34 -05:00
Chee Hong Ang
c0f3296f83 ARMv8: Add EL3 exception handling for ARMv8's Kconfig
Kconfig option to allow all External Abort and SError exception
taken to EL3.

Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com>
2018-11-16 13:34:34 -05:00
Vladimir Zapolskiy
72f6d6b7ea arm: lpc32xx: remove phantom CONFIG_LPC32XX_SDRAM_ config option
The option has never existed and config whitelist script accumulates
it from a comment block, wipe it out from the source code.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2018-10-19 12:56:58 -04:00
Vladimir Zapolskiy
ee54dfea45 arm: lpc32xx: add CONFIG_ARCH_LPC32XX build option
The explicit arch specific build symbol allows to group supported
boards, generalize common config options and it will serve as
a dependency for platform only drivers.

Two related board defconfigs are resynced after the change.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2018-10-19 12:56:58 -04:00
Siva Durga Prasad Paladugu
5860bc16b9 arm64: zynqmp: Add new command for TCM initialization
This patch adds new zynqmp command "zynqmp tcminit mode" to
initialize TCM. TCM needs to be initialized before accessing
to avoid ECC errors. This new command helps to perform
the same. It also makes tcm_init() as global and uses it for
doing the TCM initialization.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-16 16:53:24 +02:00
Siva Durga Prasad Paladugu
12ad2994a5 arm64: zynqmp: Move TCM initialization to a separate routine
This patch moves TCM initialization to a separate routine to
make it modular and can be reused if required. It also prints
warning message now as it writes to TCM.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-16 16:53:24 +02:00
Patrick Delaunay
6180ea7e66 arm: remove prototype for get_timer_masked
The interruption support had be removed for ARM architecture and
the function get_timer_masked() is no more used except in some
the timer.c files.

This patch clean each timer.c which implement this function and
remove the associated prototype in u-boot-arm.h

For timer.c, I don't verify if the weak version of get_timer
(in lib/time.c) can be used

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-10-10 13:35:09 -04:00
Patrick Delaunay
aa33fe8695 arm: remove prototype for udelay_masked
The interruption support had be removed for ARM architecture and
the function udelay_masked() is no more used except in some timer.c
files  and have the same content than udelay() or __udelay().

This patch update each timer.c implementing this function and
remove the associated prototype in u-boot-arm.h.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-10-10 13:35:09 -04:00
Patrick Delaunay
aad5b4a351 arm: remove prototype for reset_timer_masked
Remove prototype for function only used in one file

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-10-10 13:35:09 -04:00
Tom Rini
27f622d568 Switch to driver model for eSDHC on Layerscape SoCs including LS1021A,
LS1043A, LS1046A, LS1088A, LS2088A.
 Switch to driver model for SATA on LS1021A and LS1043A.
 Add support for LS1012AFRWY rev C board.
 Enable SMMU for LS1043A.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJbrkHRAAoJEO1FWZTaC520r3UQAIBntTglI1QK7YizVxZ1x9DL
 42oSEIwkuN0wbndR7Jzx4EPPFJ8yX4v3stoxC3qS5DQ9kHMzuqRQcIDYbcn5Qy7Z
 vd0mBUmpkRjr988pSaSHVQ8kPasncb545fCUumrXrCmhuG5Ea2Itw1zLdsTf7X5n
 39KxFUOAR63BDCT0ZlR4VyMo01GxxHWCzRQH/rOWVzOcJsWF7R52hWIBBzVDxKPv
 HF9SYaAB0PTFgSjJx5wYQ4xPdHVUp+svtYSJE8JYzEr/BvOVtL2iEi4t2rk19CrX
 IaVMFydlv2iDgWdoSZFCCN/6lGDWSv1LWPDglWhLQhOYvrJOjZfgzzeAGU7wqoz4
 JVjSLf6dHeOma55dbP/epDmyDFqWIfNOQ3uP4RM57xJ0PXQuT7ACVJctr6kHVTGL
 1ZZxPdKSSf9lvtzoogPTTYRD5Ry7ud3sYZ0v3OHN1sbVcaHaVoHPeXeSz1sLg3Q+
 zhUo1lXx4FcTz9R1fafdcqqAk/YGMZ7sBE+uYJPgExnApxrZID9IiOdGIBxo8jiK
 ozLmaCIDqRyu/qhQW9WMri1tvYdKwq/739gBvvcIcrLR5RzfNUdwWjhtBokPQQnS
 WZNqd3/0N8ZFGz7V0GOxCDnAo4nwQeZVFGMtTpoCtjPvr6DWBHsEUlQHTT3dQKz/
 TXygMYUYGA+/vux0Dt4I
 =XRFI
 -----END PGP SIGNATURE-----

Merge tag 'fsl-qoriq-for-v2018.11-rc1' of git://git.denx.de/u-boot-fsl-qoriq

Switch to driver model for eSDHC on Layerscape SoCs including LS1021A,
LS1043A, LS1046A, LS1088A, LS2088A.
Switch to driver model for SATA on LS1021A and LS1043A.
Add support for LS1012AFRWY rev C board.
Enable SMMU for LS1043A.
2018-09-29 11:47:32 -04:00
Ran Wang
26cbc0d663 armv7: ls102xa: Disable QE before enter deep sleep
Otherwise system will hang after executing wfi.

Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-09-27 10:01:28 -07:00
Laurentiu Tudor
dc29a4c177 armv8: ls1043a: add icid setup support
Reuse the existing ICID setup code done for LS1046A smmu enablement
and add the equivalent setup for LS1043A chips.

Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-09-27 08:58:15 -07:00
Peng Ma
686203737e armv7: fsl: remove sata support
Remove the old implementation in order to enable DM for sata

Signed-off-by: Peng Ma <peng.ma@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-09-27 08:53:03 -07:00
Yinbo Zhu
0fdf696721 armv8/ls1088a/ls2088a: esdhc: Add esdhc clock support
This patch adds esdhc clock support for ls1088a and ls2088a.

Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-09-27 08:50:26 -07:00
Yinbo Zhu
c3ced8a6ed ppa/fm/qe: use block layer in ppa/fm/qe driver
At present the MMC subsystem maintains its own list of MMC devices.
This cannot work with driver model when CONFIG_BLK is enabled, use
blk_dread to replace previous mmc read interface, use
mmc_get_blk_desc to get the mmc device property.

Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
[York S: reformatted commit message]
Reviewed-by: York Sun <york.sun@nxp.com>
2018-09-27 08:48:51 -07:00
Tom Rini
bbef20d479 Xilinx changes for v2018.11
- Handle BOARD_LATE_INIT via Kconfig
 
 SPL:
 - Enable GZIP for all partitions types(not only for kernel)
 
 ZynqMP:
 - Rearrange pmufw version handling
 - Support newer PMUFW with improved fpga load sequence
 
 Zynq:
 - Cleanup config file
 - Simplify zybo config by enabling option via Kconfig
 
 net:
 - Fix gems max-speed property reading
 - Enable support for fixed-link phys
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAluss3IACgkQykllyylKDCFQWwCfc7bvoUN1vevGYTfcG2cEYSF5
 IxQAoI/10FGWJS6rgTG0IVFvoSI1ALhA
 =Q/Tg
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2018.11' of git://git.denx.de/u-boot-microblaze

Xilinx changes for v2018.11

- Handle BOARD_LATE_INIT via Kconfig

SPL:
- Enable GZIP for all partitions types(not only for kernel)

ZynqMP:
- Rearrange pmufw version handling
- Support newer PMUFW with improved fpga load sequence

Zynq:
- Cleanup config file
- Simplify zybo config by enabling option via Kconfig

net:
- Fix gems max-speed property reading
- Enable support for fixed-link phys
2018-09-27 08:29:10 -04:00
Tom Rini
0ae8dcfef7 Patch queue for efi - 2018-09-26
A lot of goodness in this release. We're *very* close to running the
 UEFI Shell and SCT natively. The only missing piece are HII protocols.
 
   - FAT write support (needed for SCT)
   - improved FAT directory support (needed for SCT)
   - RTC support with QEMU -M virt
   - Sandbox support (run UEFI binaries in Linux - yay)
   - Proper UTF-16 support
   - EFI_UNICODE_COLLATION_PROTOCOL support (for UEFI Shell)
   - EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL support (for UEFI Shell)
   - Fix window size determination
   - Fix Tegra by explicitly unmapping RAM
   - Clean up handle entanglement
   - Lots of generic code cleanup
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJbq6+cAAoJECszeR4D/txgV1cP+wZPVsY/kRDwCZ8PODOIyLW/
 YWWX0CHOUNIXcvWyrQQVflRKE7IbsoPNU+PxOze/toBZvNGZofCqd/P0sT0kk8UU
 /aQ55+Hn8/N4etysKxhk2uszBuEXZsOdprNV3H7tO9vKsMHpImAdLvIyviYK0eCF
 WnNsmDVFv/W4M5IWDJrS7KqwTuLPYE5Xli9BW/O2qi8NOvpfyb4EEqdL7OHyHAxe
 8zpzyaRXJkPcgPkJ6z3WZ+BmAuXSl5DsLWqfsnZJQzkXatRhT8PneRk787e+xK3A
 OEFarj5t/94T1KivxquM9iYi0NzwGWrrCfRzbQh5klV4Z/bRYHbGQ92j6iZyfnpj
 0zvWrJCalDaUz310BKZDyzKYQnoDj5/iYaMJHtaG6zmkXCzM41kniGKxuy/3IpTB
 ozeFtH2AOwlAFZRIzQiazkyU0bizis2Y/K4xzOQczvVajdLW0DsLXL/hyqaFaGO2
 3oVK350FXMHKa1UhpsG05aoQvyYq8N4YVEfOSdBKah8qhhMG8zZ2IaX5oheZJjr4
 yPV8iaSj8trX3mI9clsnX9YT7qJdcS188JYSii+8SVpVH4VpgwvUSHfDqznn7JNz
 COue6rFo9sg55Le9OsoxUgaQ5GO4oz+5iGmfyBmOtQ3n83JxmP4CJK84Ykw2i9fi
 sxJR6aNtktsLhfYhlDO/
 =ZuJG
 -----END PGP SIGNATURE-----

Merge tag 'signed-efi-next' of git://github.com/agraf/u-boot

Patch queue for efi - 2018-09-26

A lot of goodness in this release. We're *very* close to running the
UEFI Shell and SCT natively. The only missing piece are HII protocols.

  - FAT write support (needed for SCT)
  - improved FAT directory support (needed for SCT)
  - RTC support with QEMU -M virt
  - Sandbox support (run UEFI binaries in Linux - yay)
  - Proper UTF-16 support
  - EFI_UNICODE_COLLATION_PROTOCOL support (for UEFI Shell)
  - EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL support (for UEFI Shell)
  - Fix window size determination
  - Fix Tegra by explicitly unmapping RAM
  - Clean up handle entanglement
  - Lots of generic code cleanup

[trini: Fixup merge conflict in include/configs/qemu-arm.h]
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-09-26 17:02:46 -04:00
Siva Durga Prasad Paladugu
b94a8271cc arm64: zynqmp: Return pmufw version for zynqmp_pmufw_version()
Modify the zynqmp_pmufw_version() routine to return PMUFW version so
that it can be reused wherever required. Get PMUFW version from PMU
only once at bootup and later just return stored value.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-09-26 10:15:00 +02:00
Siva Durga Prasad Paladugu
fe68f2332d arm64: zynqmp: Move PM version related macros to .h
This patch moves the PM version related macros to .h file so that
they can be reused in other files.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-09-26 10:15:00 +02:00
Quentin Schulz
ac47fbee6d arm: spear: enable SSP1, 2 and 3 clocks when SPI controller driver is built
SPI controllers SSP1, 2 and 3 require to enable their respective clocks.
Let's enable them only when the SPI controller driver is built.

Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
2018-09-25 21:49:18 -04:00
Stephen Warren
9b5e6396bf efi_loader: simplify ifdefs
Use CONFIG_IS_ENABLED(EFI_LOADER) to avoid explicitly checking CONFIG_SPL
too. This simplifies the conditional.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:29 +02:00
Quentin Schulz
d2d908d258 arm: spear: enable GPIO3 and 4 clocks when the GPIO controller driver is built
There are multiple GPIOs that can be used with the same driver depending
on the CONFIG_GPIO_BASE defined in the controller driver.

GPIO3 and 4 require a clock to be enabled so let's enable them when the
driver is built.

Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
2018-09-10 21:19:32 -04:00
Adam Ford
93b283d49f ARM: CPU: arm926ejs: Consolidate cache routines to common file
Four different boards had different options for enabling cache
that were virtually all the same.  This consolidates these
common functions into arch/arm/cpu/arm926ejs/cache.c

This also has the positive side-effect of enabling cache on
the Davinci (da850) boards.

Signed-off-by: Adam Ford <aford173@gmail.com>
[trini: Add mach-at91 to the list of consolidations]
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-09-10 21:19:16 -04:00
Chen-Yu Tsai
792b204798 ARM: Specify aligned address for secure section instead of using attributes
In commit a1274cc94a ("ARM: Page align secure section only when it is
executed in situ"), we used output section attributes (the "ALIGN"
keyword after the colon) to specify the alignment requirements. Using
the constant "COMMONPAGE" there was recently broken in binutils 2.31 [1].

Binutils maintainer Alan Modra suggested the former method would still
work. Since both methods achieve the same result, this patch does just
that. This fixes the "reboot after bootm" issue we've been seeing on
sunxi when booting non-secure.

  [1] https://sourceware.org/bugzilla/show_bug.cgi?id=23571

Suggested-by: Alan Modra <amodra@gmail.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Jagan Teki <jagan@openedev.com>
2018-09-07 09:11:42 -04:00
York Sun
50f566d6ee armv8: fsl-layerscape: Update README.falcon for compression
Update README.falcon to use "none" for compression property for
ramdisk image to avoid being uncompressed upon loading.

Signed-off-by: York Sun <york.sun@nxp.com>
2018-08-23 08:17:35 -07:00
Ran Wang
9add5a4b75 armv8: layerscape: Enable EHCI access for LS1012A
Program Central Security Unit (CSU) to grant access to USB 2.0
controller.

Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
[YS: rewrite commit message]
Reviewed-by: York Sun <york.sun@nxp.com>
2018-08-10 10:37:39 -07:00
Laurentiu Tudor
5651f438f8 armv8: ls1046a: setup SEC ICIDs and fix up device tree
Add support for SEC ICID configuration and apply it for ls1046a.
Also add code to make the necessary device tree fixups.

Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Bharat Bhushan <bharat.bhushan@nxp.com>
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-08-10 10:35:46 -07:00
Laurentiu Tudor
b50ff5e1b6 armv8: ls1046a: setup fman ports ICIDs and device tree
Add support for ICID setting of fman ports and the required device
tree fixups.

Reviewed-by: Bharat Bhushan <bharat.bhushan@nxp.com>
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-08-10 10:35:42 -07:00
Laurentiu Tudor
599a97d49c armv8: ls1046a: add icid setup for qman portals
Add support for ICID setting of qman portals and the required device
tree fixups. Also fix an endiness issue in portal setup code.

Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-08-10 10:35:36 -07:00
Laurentiu Tudor
3cb4fe65f9 armv8: ls1046a: initial icid setup support
Add infrastructure for ICID setup and device tree fixup on ARM
platforms. This include basic ICID setup for several devices.

Reviewed-by: Bharat Bhushan <bharat.bhushan@nxp.com>
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-08-10 10:35:33 -07:00
Brendan Shanks
e784cf1bf2 arm: ls102xa: Fix RGMII phy-connection-type FDT fixup
In ft_fixup_enet_phy_connect_type(), use strlen() instead of sizeof()
on the pointer result of phy_string_for_interface(). sizeof() was
returning the size of the pointer (4 bytes), resulting in the
phy-connection-type being set to "rgmi" rather than "rgmii-id".

Signed-off-by: Brendan Shanks <brendan.shanks@teradek.com>
Cc: York Sun <york.sun@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-08-07 14:42:15 -07:00
Andre Przywara
1416e2d225 armv8: make SPL exception vectors optional
Even though the exception vector table is a fundamental part of the ARM
architecture, U-Boot mostly does not make real use of it, except when
crash dumping. But having it in takes up quite some space, partly due to
the architectural alignment requirement of 2KB. Since we don't take special
care of that, the compiler adds a more or less random amount of padding
space, which increases the image size quite a bit, especially for the SPL.

On a typical Allwinner build this is around 1.5KB of padding, plus 1KB
for the vector table (mostly padding space again), then some extra code
to do the actual handling. This amounts to almost 10% of the maximum image
size, which is quite a lot for a pure debugging feature.

Add a Kconfig symbol to allow the exception vector table to be left out
of the build for the SPL.
For now this is "default y" for everyone, but specific defconfigs,
platforms or .config files can opt out here at will, to mitigate the code
size pressure we see for some SPLs.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2018-08-03 19:53:54 -04:00
Andre Przywara
15b6184971 armv8: Reduce exception handling code
The arm64 exception handling code is quite big, mostly due to
architectural alignment requirements. Each exception entry spans 32
instructions, which sounds generous, but is too small to fit all of the
save/branch/restore code in there. So at the moment we use only four
instructions, branching into shared save and restore routines.
To not leave the space for those remaining 28 instructions wasted, let's
split the save and restore routines and stuff them into the gaps.
This saves about 250 bytes of code, which is helpful for those tight
SPLs.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2018-08-03 19:53:54 -04:00
Tom Rini
406fd7e207 Patch queue for efi - 2018-07-25
Highlights this time:
 
   - Many small fixes to improve spec compatibility (found by SCT)
   - Almost enough to run with sandbox target
   - GetTime() improvements
   - Enable EFI_LOADER and HYP entry on ARMv7 with NONSEC=y
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJbWHUwAAoJECszeR4D/txgKlUP/3Lu6pxScwzL7TsSD6OFZQ6M
 qQq2FH89XOA6/3r04RXrJZoHwOKIH5uj7ea6FlitpS1sQ4UOCQhp/lJJuJennHHj
 +veeuzI1sKTCX8Kd9ptrZDEF3G8lbF/zSyCFa1MOd1ONDVsTgSO9fOGmiqcC9FBF
 UrUH7dzXlE2CWs/mv/UikCBI7rYF+NOFJNuwHVXfsW4PyQ/7uaNsa7Rl3mXYb/Lr
 gjdcJkeHZAmFv/r84tGS9AFv+m0So9AGEYD7MeQDt02hSOuH9/nu4HgPmiwln3Fn
 3sFA3+daMrlFNi6kFw10S0sjKz94nN+Arm6cIXlvGaoc/wnPM2wEcKOSiXhzVM8d
 CoP/26N/ETRoI9P01C2WyTrKjo0O0aFwp3ubfmmbdcaKr/pyjAJgb3BnqXBfAr7T
 OjsE086jtHzdyKYKXDIz8+ZxSo4VsiDjBzDK7LVA0L5KtqAFFa+OYjlgEMJnQCk3
 YJfj+rhxfpjzFI7x5BAgq0q3XQRvAJS8QcUq+V2todQ3JkUlCIaVUNQLWAfNJN0q
 ze/WR8l4nwj5YFo8XiEbFHpQi/1bkR6cSzyjlBKUqrtHUUEu32vWlzZpNi6HzPMq
 cP7gehboFlcCSr8T2UMjBTE1LWI35eWNQQoiNRrS2UVcTH9h1vXMFV9PT+I82BBl
 ivJ+YwF9nU1JdS8CG3n7
 =ePTT
 -----END PGP SIGNATURE-----

Merge tag 'signed-efi-next' of git://github.com/agraf/u-boot

Patch queue for efi - 2018-07-25

Highlights this time:

  - Many small fixes to improve spec compatibility (found by SCT)
  - Almost enough to run with sandbox target
  - GetTime() improvements
  - Enable EFI_LOADER and HYP entry on ARMv7 with NONSEC=y
2018-07-30 16:02:29 -04:00
Michal Simek
58008cbab5 Kconfig: Sort bool, default, select and imply options
Another round of sorting Kconfig entries aplhabetically.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2018-07-30 07:18:48 -04:00
Tom Rini
0e8a8a3110 Merge git://git.denx.de/u-boot-fsl-qoriq 2018-07-27 13:09:30 -04:00
Joe Hershberger
9cce566321 arm: Prevent redefinition error in fsl-layerscape
The include/phy.h will start including dm.h, which pulls in
linux/compat.h after the attempted redefinition in
arch/arm/include/asm/armv8/mmu.h, so move this include to allow
redefinition.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2018-07-26 14:08:21 -05:00
York Sun
038b965c2b armv8: ls1046ardb: Add falcon mode for for QSPI boot
A new defconfig is introduced to support SPL boot from QSPI NOR
flash. This is to support falcon mode for faster booting into
Linux.

Signed-off-by: York Sun <york.sun@nxp.com>
2018-07-26 11:51:23 -07:00
York Sun
9960609275 armv8: layerscape: spl: Initialize QSPI AHB for QSPI boot
To get full access of QSPI space, initialize AHB interface.

Signed-off-by: York Sun <york.sun@nxp.com>
2018-07-26 10:59:35 -07:00
Yuantian Tang
ed167eb1c7 armv8: fsl: remove sata support
Remove the old implementation in order to enable DM for sata.

Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-07-26 10:59:35 -07:00
York Sun
61ab8aac60 armv8: layerscape: Enabled I-cache for SPL boot
Enable I-cache for SPL boot to boost performance. Earlier MMU was
enabled only for LS2080A and has since been dropped by commit
f539c8a4a7 ("armv8: ls2080a: Drop early MMU for SPL build").

Signed-off-by: York Sun <york.sun@nxp.com>
2018-07-26 10:59:35 -07:00
Alexander Graf
7e21fbca26 efi_loader: Rename sections to allow for implicit data
Some times gcc may generate data that is then used within code that may
be part of an efi runtime section. That data could be jump tables,
constants or strings.

In order to make sure we catch these, we need to ensure that gcc emits
them into a section that we can relocate together with all the other
efi runtime bits. This only works if the -ffunction-sections and
-fdata-sections flags are passed and the efi runtime functions are
in a section that starts with ".text".

Up to now we had all efi runtime bits in sections that did not
interfere with the normal section naming scheme, but this forces
us to do so. Hence we need to move the efi_loader text/data/rodata
sections before the global *(.text*) catch-all section.

With this patch in place, we should hopefully have an easier time
to extend the efi runtime functionality in the future.

Signed-off-by: Alexander Graf <agraf@suse.de>
[agraf: Fix x86_64 breakage]
2018-07-25 14:57:44 +02:00
Mark Kettenis
d32e86bde8 ARM: HYP/non-sec: enable ARMV7_LPAE if HYP mode is supported
ARMV7_LPAE is required in order to enable the MMU in HYP mode.
And we really want to enable the MMU in HYP mode such that we can
enable the the caches.  Otherwise U-Boot code (such as the EFI
implementation) that runs in HYP mode will run at a snils pace.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-07-25 14:57:43 +02:00
Mark Kettenis
907ee2945e ARM: HYP/non-sec: migrate stack
The current code that switches into HYP mode doesn't bother to set
up a stack for HYP mode.  This doesn't work for EFI applications
as they expect a usable stack.  Fix this by migrating the stack
pointer from SP_svc to SP_hyp while in Monitor mode.
This restores the stack pointer when we drop into HYP mode.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-07-25 14:57:43 +02:00
Stefan Agner
77fcc2cc90 ARM: PSCI: initialize stack pointer on secondary CPUs
A proper stack is required to safely use C code in psci_arch_cpu_entry.

Fixes: 486daaa618 ("arm: psci: add a weak function psci_arch_cpu_entry")
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Patrick DELAUNAY <Patrick.delaunay@st.com>
Tested-by: Patrick DELAUNAY <Patrick.delaunay@st.com>
2018-07-23 10:53:12 +02:00
Tom Rini
4ac5df4b41 Merge branch 'master' of git://git.denx.de/u-boot-sunxi 2018-07-03 23:09:34 -04:00
Andre Przywara
be0d217952 arm: timer: sunxi: add Allwinner timer erratum workaround
The Allwinner A64 SoCs suffers from an arch timer implementation erratum,
where sometimes the lower 11 bits of the counter value erroneously
become all 0's or all 1's [1]. This leads to sudden jumps, both forwards and
backwards, with the latter one often showing weird behaviour.
Port the workaround proposed for Linux to U-Boot and activate it for all
A64 boards.
This fixes crashes when accessing MMC devices (SD cards), caused by a
recent change to actually use the counter value for timeout checks.

Fixes: 5ff8e54888 ("sunxi: improve throughput
in the sunxi_mmc driver")

[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2018-May/576886.html

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Andreas Färber <afaerber@suse.de>
Tested-by: Guillaume Gardet <guillaume.gardet@free.fr>
2018-07-03 22:00:00 +05:30
Andre Przywara
38651588d3 arm: timer: factor out FSL arch timer erratum workaround
At the moment we have the workaround for the Freescale arch timer
erratum A-008585 merged into the generic timer_read_counter() routine.
Split those two up, so that we can add other errata workaround more
easily. Also add an explaining comment on the way.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Andreas Färber <afaerber@suse.de>
Tested-by: Guillaume Gardet <guillaume.gardet@free.fr>
2018-07-03 21:59:46 +05:30
Nishanth Menon
c2ca3fdfb9 ARM: Introduce ability to enable invalidate of BTB with ICIALLU on Cortex-A15 for CVE-2017-5715
As recommended by Arm in [1], ACTLR[0] (Enable invalidates of BTB)
needs to be set[2] for BTB to be invalidated on ICIALLU. This needs to
be done unconditionally for Cortex-A15 processors. Provide a config
option for platforms to enable this option based on impact analysis
for products.

NOTE: This patch in itself is NOT the final solution, this requires:
a) Implementation of v7_arch_cp15_set_acr on SoCs which may not
   provide direct access to ACR register.
b) Operating Systems such as Linux to provide adequate workaround in the
   right locations.
c) This workaround applies to only the boot processor. It is important
   to apply workaround as necessary (context-save-restore) around low
   power context loss OR additional processors as necessary in either
   firmware support OR elsewhere in OS.

[1] https://developer.arm.com/support/security-update
[2] http://infocenter.arm.com/help/topic/com.arm.doc.ddi0438c/BABGHIBG.html

Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Andre Przywara <Andre.Przywara@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Michael Nazzareno Trimarchi <michael@amarulasolutions.com>

Signed-off-by: Nishanth Menon <nm@ti.com>
Tested-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-06-29 11:30:39 -04:00