armv8: ls1088a: add icid setup for platform devices

Add ICID setup for the platform devices contained on this chip: usb,
sata, sdhc, sec. The ICID macros for SEC needed to be adapted because
the format of the registers is different.

Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>

arch/arm/cpu/armv8/fsl-layerscape/Makefile

@@ -47,6 +47,7 @@ endif
 
 ifneq ($(CONFIG_ARCH_LS1088A),)
 obj-$(CONFIG_SYS_HAS_SERDES) += ls1088a_serdes.o
+obj-y += icid.o ls1088_ids.o
 endif
 
 ifneq ($(CONFIG_ARCH_LS1028A),)

arch/arm/cpu/armv8/fsl-layerscape/ls1088_ids.c

@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <common.h>
+#include <asm/arch-fsl-layerscape/immap_lsch3.h>
+#include <asm/arch-fsl-layerscape/fsl_icid.h>
+#include <asm/arch-fsl-layerscape/fsl_portals.h>
+
+struct icid_id_table icid_tbl[] = {
+	SET_SDHC_ICID(FSL_SDMMC_STREAM_ID),
+	SET_USB_ICID(1, "snps,dwc3", FSL_USB1_STREAM_ID),
+	SET_USB_ICID(2, "snps,dwc3", FSL_USB2_STREAM_ID),
+	SET_SATA_ICID(1, "fsl,ls1088a-ahci", FSL_SATA1_STREAM_ID),
+	SET_SEC_JR_ICID_ENTRY(0, FSL_SEC_JR1_STREAM_ID),
+	SET_SEC_JR_ICID_ENTRY(1, FSL_SEC_JR2_STREAM_ID),
+	SET_SEC_JR_ICID_ENTRY(2, FSL_SEC_JR3_STREAM_ID),
+	SET_SEC_JR_ICID_ENTRY(3, FSL_SEC_JR4_STREAM_ID),
+	SET_SEC_RTIC_ICID_ENTRY(0, FSL_SEC_STREAM_ID),
+	SET_SEC_RTIC_ICID_ENTRY(1, FSL_SEC_STREAM_ID),
+	SET_SEC_RTIC_ICID_ENTRY(2, FSL_SEC_STREAM_ID),
+	SET_SEC_RTIC_ICID_ENTRY(3, FSL_SEC_STREAM_ID),
+	SET_SEC_DECO_ICID_ENTRY(0, FSL_SEC_STREAM_ID),
+	SET_SEC_DECO_ICID_ENTRY(1, FSL_SEC_STREAM_ID),
+	SET_SEC_DECO_ICID_ENTRY(2, FSL_SEC_STREAM_ID),
+	SET_SEC_DECO_ICID_ENTRY(3, FSL_SEC_STREAM_ID),
+};
+
+int icid_tbl_sz = ARRAY_SIZE(icid_tbl);

arch/arm/cpu/armv8/fsl-layerscape/soc.c

@@ -340,6 +340,10 @@ void fsl_lsch3_early_init_f(void)
 	if (fsl_check_boot_mode_secure() == 1)
 		bypass_smmu();
 #endif
+
+#ifdef CONFIG_ARCH_LS1088A
+	set_icids();
+#endif
 }
 
 /* Get VDD in the unit mV from voltage ID */

arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h

@@ -40,6 +40,14 @@ void fdt_fixup_icid(void *blob);
 	  .le = _le \
 	}
 
+#ifdef CONFIG_SYS_FSL_SEC_LE
+#define SEC_IS_LE true
+#elif defined(CONFIG_SYS_FSL_SEC_BE)
+#define SEC_IS_LE false
+#endif
+
+#ifdef CONFIG_FSL_LSCH2
+
 #ifdef CONFIG_SYS_FSL_CCSR_SCFG_LE
 #define SCFG_IS_LE true
 #elif defined(CONFIG_SYS_FSL_CCSR_SCFG_BE)
@@ -100,11 +108,7 @@ void fdt_fixup_icid(void *blob);
 #define SET_FMAN_ICID_ENTRY(_port_id, streamid) \
 	{ .port_id = (_port_id), .icid = (streamid) }
 
-#ifdef CONFIG_SYS_FSL_SEC_LE
-#define SEC_IS_LE true
-#elif defined(CONFIG_SYS_FSL_SEC_BE)
-#define SEC_IS_LE false
-#endif
+#define SEC_ICID_REG_VAL(streamid) (((streamid) << 16) | (streamid))
 
 #define SET_SEC_QI_ICID(streamid) \
 	SET_ICID_ENTRY("fsl,sec-v4.0", streamid, \
@@ -112,6 +116,38 @@ void fdt_fixup_icid(void *blob);
 		CONFIG_SYS_FSL_SEC_ADDR, \
 		CONFIG_SYS_FSL_SEC_ADDR, SEC_IS_LE)
 
+extern struct fman_icid_id_table fman_icid_tbl[];
+extern int fman_icid_tbl_sz;
+
+#else /* CONFIG_FSL_LSCH2 */
+
+#ifdef CONFIG_SYS_FSL_CCSR_GUR_LE
+#define GUR_IS_LE true
+#elif defined(CONFIG_SYS_FSL_CCSR_GUR_BE)
+#define GUR_IS_LE false
+#endif
+
+#define SET_GUR_ICID(compat, streamid, name, compataddr) \
+	SET_ICID_ENTRY(compat, streamid, streamid, \
+		offsetof(struct ccsr_gur, name) + CONFIG_SYS_FSL_GUTS_ADDR, \
+		compataddr, GUR_IS_LE)
+
+#define SET_USB_ICID(usb_num, compat, streamid) \
+	SET_GUR_ICID(compat, streamid, usb##usb_num##_amqr,\
+		CONFIG_SYS_XHCI_USB##usb_num##_ADDR)
+
+#define SET_SATA_ICID(sata_num, compat, streamid) \
+	SET_GUR_ICID(compat, streamid, sata##sata_num##_amqr, \
+		AHCI_BASE_ADDR##sata_num)
+
+#define SET_SDHC_ICID(streamid) \
+	SET_GUR_ICID("fsl,esdhc", streamid, sdmm1_amqr,\
+		CONFIG_SYS_FSL_ESDHC_ADDR)
+
+#define SEC_ICID_REG_VAL(streamid) (streamid)
+
+#endif /* CONFIG_FSL_LSCH2 */
+
 #define SET_SEC_JR_ICID_ENTRY(jr_num, streamid) \
 	SET_ICID_ENTRY( \
 		(CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT && \
@@ -120,24 +156,22 @@ void fdt_fixup_icid(void *blob);
 			? NULL \
 			: "fsl,sec-v4.0-job-ring"), \
 		streamid, \
-		(((streamid) << 16) | (streamid)), \
+		SEC_ICID_REG_VAL(streamid), \
 		offsetof(ccsr_sec_t, jrliodnr[jr_num].ls) + \
 		CONFIG_SYS_FSL_SEC_ADDR, \
 		FSL_SEC_JR##jr_num##_BASE_ADDR, SEC_IS_LE)
 
 #define SET_SEC_DECO_ICID_ENTRY(deco_num, streamid) \
-	SET_ICID_ENTRY(NULL, streamid, (((streamid) << 16) | (streamid)), \
+	SET_ICID_ENTRY(NULL, streamid, SEC_ICID_REG_VAL(streamid), \
 		offsetof(ccsr_sec_t, decoliodnr[deco_num].ls) + \
 		CONFIG_SYS_FSL_SEC_ADDR, 0, SEC_IS_LE)
 
 #define SET_SEC_RTIC_ICID_ENTRY(rtic_num, streamid) \
-	SET_ICID_ENTRY(NULL, streamid, (((streamid) << 16) | (streamid)), \
+	SET_ICID_ENTRY(NULL, streamid, SEC_ICID_REG_VAL(streamid), \
 		offsetof(ccsr_sec_t, rticliodnr[rtic_num].ls) + \
 		CONFIG_SYS_FSL_SEC_ADDR, 0, SEC_IS_LE)
 
 extern struct icid_id_table icid_tbl[];
-extern struct fman_icid_id_table fman_icid_tbl[];
 extern int icid_tbl_sz;
-extern int fman_icid_tbl_sz;
 
 #endif

arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h

@@ -98,4 +98,10 @@
 #define FSL_DPAA2_STREAM_ID_START	23
 #define FSL_DPAA2_STREAM_ID_END		63
 
+#define FSL_SEC_STREAM_ID		64
+#define FSL_SEC_JR1_STREAM_ID		65
+#define FSL_SEC_JR2_STREAM_ID		66
+#define FSL_SEC_JR3_STREAM_ID		67
+#define FSL_SEC_JR4_STREAM_ID		68
+
 #endif

board/freescale/ls1088a/ls1088a.c

@@ -21,6 +21,7 @@
 #include <hwconfig.h>
 #include <asm/arch/fsl_serdes.h>
 #include <asm/arch/soc.h>
+#include <asm/arch-fsl-layerscape/fsl_icid.h>
 
 #include "../common/qixis.h"
 #include "ls1088a_qixis.h"
@@ -968,6 +969,9 @@ int ft_board_setup(void *blob, bd_t *bd)
 #ifdef CONFIG_FSL_MC_ENET
 	fdt_fixup_board_enet(blob);
 #endif
+
+	fdt_fixup_icid(blob);
+
 	if (is_pb_board())
 		fixup_ls1088ardb_pb_banner(blob);